Acnodes MPC 6171A Computer Hardware User Manual

MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
User Manual
MPC 6171A: 17” Industrial Medical Grade Panel PC with Core 2 Duo 2.20GHz processor
MPC6171B: 17” Industrial Medical Grade Panel PC with Core 2 Duo 2.20GHz processor (No Touch Screen)
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
ACKNOWLEDGEMENTS
Intel® and Core 2 Duo and Core Solo are registered trademarks of Intel® Corporation.
IBM, PC/AT, PS/2 are trademarks of International Business Machines Corporation.
Microsoft® Windows is a registered trademark of Microsoft Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
ITE is a trademark of Integrated Technology Express, Inc.
VIA is a trademark of VIA Technology, Inc.
Award is a registered trademark of Award Software International, Inc.
PS/2 is a trademark of International Business Machines Corporation.
Intel is a trademark or registered trademark of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft Corporation.
Winbond is a registered trademark of Winbond Electronics Corporation.
All other product names or trademarks are properties of their respective owners.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
FCC CLASS B
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 18 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential environment. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with this user manual, itmay
cause harmful interference to radio communications.
Note that even when this equipment is installed and used in accordance with this user manual, there
is still no guarantee that interference will not occur. If this equipment is believed to be causing
harmful interference to radio or television reception, this can be determined by turning the equipment on and off. If interference is occurring, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment to a power outlet on a circuit different from that to which the receiver
is connected
Consult the dealer or an experienced radio/TV technician for help
Warning:
Any changes or modifications made to the equipment which are not expressly approved by the
relevant standards authority could void your authority to operate the equipment.
Caution:
Danger of explosion if battery is incorrectly replaced, replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according the manufacturer's instructions.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
SAFETY INSTRUCTIONS
Greeting & Setup
Thank you for purchasing the MPC6171A/ MPC6171B unit. We wish that this unit will be durable
and reliable in providing your medical application needs. Please follow the instructions below to
ensure the unit continues to have high performance.
Unpacking
After opening the carton, there will be a Monitor display unit with an accessory box. Examine the
contents to see if there are damages to the unit and if all accessories are present.
Setting up
Please read this manual carefully and remember to keep this manual for future reference.
Safety Instructions & Cleaning
The unit has undergone various tests in order to comply with safety standards. Inappropriate use of
the open frame unit may be dangerous. Please remember to follow the instructions below to insure
your safety during the installation and operating process.
Transporting & Placement of unit
1. When moving the unit on a cart; be very cautious. Quick stops, excessive forces and uneven
surfaces may cause the cart to overturn thus risking the unit to fall to the ground.
2. If the Monitor display unit does fall to the ground, immediately turn the power off and disconnect
cords. Then contact a service technician for repairs. Continual use of the unit may result cause a
fire or electric shock. Also, do not repair the unit on your own.
3. Having two or more people transporting the display unit is recommended. In addition, when
installing the unit by suspending it also requires two or more people.
4. Before suspending the unit, make sure the material used for suspension is sturdy and stable. If
not properly suspended, the display unit may fall and cause serious injury to people standing nearby
as well as to the unit itself.
5. If you wish to mount the display unit, remember to use only the mounting hardware recommended
by the manufacturer.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
Electrical and Power Source Related
1. This Monitor display unit must operate on a power source as shown on the specification label. If
you are not sure what type of power supply used in the area, consult your dealer or local power
supplier.
2. The power cords must not be damaged. Applied pressure, added heat, and tugging may damage the power cord.
3. The power cord must be routed properly when setup takes place. We advise that this aspect
measure is to prevent people from stepping on the cords or while the unit is suspended to prevent
flying objects from getting tangled with the unit.
4. Do not overload the AC outlets or extension cords.
Electrical shocks or fires may occur from overloading.
5. Do not touch the power source during a thunderstorm.
6. If your hands are wet, do not touch the plug.
7. Use your thumb and index finger, grip firmly on the power cord to disconnect from the electrical
socket. By pulling the power cord, may result in damaging it.
8. If the unit is not going to be in use for an extended period of time, remember to disconnect the
unit.
9. The Monitor display unit uses voltage between 90-264VAC. Connect the unit to a power source
with the same numerical value as shown. Please use only the power cord provided by the dealer to
ensure safety and EMC compliance.
Various Factors of Environment
1. Do not insert objects into the openings.
2. Do not have liquids seep into the internal areas of the Monitor display unit.
3. Having liquids seep in or inserting objects into the unit may result in electric shocks from taking
and/or short circuiting the internal parts.
4. Do not place the Monitor display unit in the presence of high moisture areas.
5. Do not install the Monitor display unit in a wet environment.
6.
Do not place near unit near heat generating sources.
7.
Do not place the unit in a location where it will come in contact with fumes or steam.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
8. Remember to keep the Monitor display unit away from the presence of dust.
9. If water has flow in or seep in, immediately disconnect the open frame unit. Then contact a service technician for repairs.
Ventilation Spacing
1. Do not cover or block the openings on the top and back sides of the display unit. Inadequate
ventilation may cause overheating thus reducing the lifespan of the unit.
2. Unless proper ventilation is present, do not place unit in an enclosed area; such as a built-in
shelf. Keep a minimum distance of 10 cm between the display unit and wall.
Cleaning the unit
1. Remember to turn off the power source and to unplug the cord from the outlet before cleaning the
unit.
2. Carefully dismount the unit or bring the unit down from suspension to clean.
3. Please use a dry soft cloth to clean the unit.
4. Take a dry cloth and wipe the unit dry. Remember to avoid having liquids seep into the internal
components and areas of the Monitor display unit.
Servicing, Repairing, Maintenance & Safety Checks
1. If the unit is not functioning properly, observe the performance level of the display closely to determine what type of servicing is needed.
2. Do not attempt to repair the Monitor display unit on your own. Disassembling the cover exposes
users' to high voltages and other dangerous conditions. Notify and request a qualified service
technician for servicing the unit.
3. If any of the following situations occur turn the power source off and unplug the unit. Then contact
a qualified service technician
(a) A liquid was spilled on the unit or objects have fallen into the unit.
(b) The unit is soaked with liquids.
(c) The unit is dropped or damaged.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
(d) If smoke or strange odor is flowing out of the operating unit.
(e) If the power cord or plug is damaged.
(f) When the functions of the unit are dysfunctional.
4. When replacement parts are needed for the Monitor display unit, make sure service technicians
use replacement parts specified by the manufacturer, or those with the same characteristics and
performance as the original parts. If unauthorized parts are used it may result in starting a fire,
electrical shock and/or other dangers.
Caution:
DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE
STORAGE TEMPERATURE IS BELOW
-20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE EQUIPMENT.
This equipment shall not be used in life support systems.
The user is not to touch SIP/SOPs and the patient at the same time.
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than
70dB (A).
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
Table of Contents
CHAPTER 1 INTRODUCTION
1.1 PRODUCT DESCRIPTION.............................................................................................. 1
1.2 PACKAGE LIST ............................................................................................................... 2
1.3 FEATURES ...................................................................................................................... 3
1.4 SPECIFICATIONS ........................................................................................................... 3
1.5 CLEANING/ DISINFECTING ........................................................................................... 6
CHAPTER 2 GETTING STARTED
2.1 SYSTEM SET UP ............................................................................................................ 9
2.2 DIMENSION .................................................................................................................... 10
2.3 SYSTEM VIEW ............................................................................................................... 11
2.4 DISCONNECT DEVICE ................................................................................................. 17
CHAPTER 3 BIOS SETUP
APPENDIX
A. JUMPER SETTINGS AND CONNECTORS.................................................................... 36
B. VESA MOUNTING ........... .................................................................................................45
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
CHAPTER 1 INTRODUCTION
1.1
PRODUCT DESCRIPTION
The MPC 6171A/ MPC 6171B Medical Panel PC are based on Intel Core 2Duo processor which
deliver a performance improvement of more than 100 percent compared to systems running traditional single-core processors. With two cores, or computing engines, MPC 6171A/ MPC 6171B can
simultaneously execute two computing tasks. It accommodates one 2.5" SATA hard disk drive and
up to 4GB DDR2 SODIMM.
The high brightness LCD, Low Noise solution, integrated multimedia functions and
extensive expansion options make them the perfect platform upon which to build comprehensive
lifestyle computing applications.
The MPC 6171A/ MPC 6171B includes all the features of a powerful computer into a slim
and attractive chassis. The MPC 6171A/ MPC 6171B has a 17" high brightness TFT display
with 1280 x 1024 resolutions.
The MPC 6171A/ MPC 6171B are compact, Giga LAN and selectable WLAN network compatible
PC with full safety and medical approval and features to control a dedicated system with a wide
variety of applications. Combining the MPC 6171A/ MPC 6171B into your system can achieve both
cost-saving and efficient improvements.
Common applications include Surgical, Radiology, PACS (Picture Archiving
Communication
Systems),
LIS (Lab Information Systems) and Electronic Medical Record. The MPC6171A/
MPC6171B are definitely your perfect choices.
1.2
PACKAGE LIST
Before you begin installing your Medical Station, please make sure that the following items have
been shipped:
o The MPC 6171A/ MPC 6171B Medical Panel PC
o One CD containing user manual, QIG, chipset drivers
o Power Adapter x 1 (Mf:Sinpro, type/model: MPU100-105)
o Power cord - Hospital grade used(US type), or other type in UK, EU…etc.
o Touch pen x 1 (By configuration)
o Screw x 8 (VESA 75/100 use)
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
1.3
FEATURES
Intel Core 2 Duo Mobile CPU / Celeron M 550 Solution
17" 380 nits high brightness
Highest performance and low power system solution
Plastic construction with medical outlook color
Resistive touch screen (optional)
802.11 b/g wireless LAN Module (optional)
Bluetooth v2.1 + EDR module (optional)
Integrated Compact Flash card reader (By configuration, optional)
Integrated webcam solution (By configuration, optional)
VESA 75/100 compliance Desktop Stand (optional)
VESA 75/100 compliance Wall Mount (optional)
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
1.4 SPECIFICATION
HARDWARE SPECIFICATIONS
Display 17" 380 nits SXGA color TFT LCD
CPU Support
MPC6171: Intel® Core 2 Duo T7500 2.2GHz
Intel® Celeron M550 2.0GHz
Disk Drive Space: 2.5" Hard Disk Drive (SATA-150)
Expansion:
One Mini PCI slot; One PCI expansion, One CF card slot expansion or one Smart card
slot expansion slot (By configuration, optional)
Button: Brightness: "+" / "-"; Sound: "+" / "-"; Power SW
I/O:
Standard Version2 RS-232 ports + 1 RS-232/422/485 port
4 USB 2.0 ports
1 DC-in w/ lock function
1 PS/2 keyboard and 1 PS/2 mouse
2 Gigabit LAN RJ-45 Connectors
Sound:
1 x Line-in
1 x line-out
1 x Mic-in
2 x 2W Speakers on back side
1 x PCI slot
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
LCD SPECIFICATIONS
Model Name: G170EG01 (V0)
Display Type: 17" color TFT LCD
Max. Resolution: 1280 x 1024
Contrast Ratio: 1000 : 1 (Typ)
Pixel Pitch (mm): 0.264 (per one triad) x 0.264
Luminance (cd/m2): 380 (TYP)
Viewing Angle: 170°(H)/ 160°(V)
Operating Temperature: 0°C~ 40°C (32°F~104°F)
Brightness Control
Yes
POWER ADAPTER SPECIFICATIONS
Power Close-frame
MFR: Sinpro
Type: MPU100-105
Input Voltage: 100 ~ 240 VAC, 1.25 max. @ 47 ~ 63 Hz
Output Voltage: 12V @ 8.33 A
MTBF: 100,000 hrs operation at 25°C
MECHANICAL SPECIFICATION
Architecture Close-frame
Front Bezel Plastic bezel with resistive touch screen
Color Medical-white
Mounting / Holder
VESA 75/100mm
Construction 3mm ABS + PC TYPE Plastic housing
Dimension (WxHxD): 16.5" x 14.2" x 3.2" (420mmx 360mm x 83mm)
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
Net Weight: 15.62 lb (7.0 kg)
Packing Filler:
PE
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 10°C to 40°C (50°F ~104°F)
Storage Temperature: -20°C to 60°C (-4°F ~140°F)
Storage Humidity:
Vibration:
5% to 95%@ 40°C, non-condensing
0.5G / 5 ~ 500Hz (Random) / operation
Shock :
Operating: 15g/0.53 oz, 11 ms, half sine wave
Non-operating: 50g/1.76 oz, 11 ms, half sine wave
Drop: 3 feet (1 Corner, 3 Edge, 6 Surface)
EMI / Safety: cUL 60601-1, FCC/VCCI class B, EN 60601-1(MDD)/EN 60601-1-2(EMC)
Noise: MPC6171: Under 30 db
Altitudes: Operational: 6,000 feet
Shipping: 40,000 feet
Input Power Rating: For Adaptor: AC100~240 V, 47 ~ 63 Hz, 1.25A max.
For Unit: 8.33A (WMP-171); 7.0A (WMP-172)
Power Consumption: MPC6171:79.50W
TOUCH SCREEN (OPTIONAL)
Type: 5-wire, Analog Resistive
Interface:
USB interface
Resolution:
2048 x 2048
Light Transmission: 80% ± 3%
Life Time: 35 million activations
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
1.5
CLEANING/ DISINFECTING
Steps:
1. Wipe the MPC6171A/ MPC6171B with a dry clean cloth.
2. Prepare agent per manufacturer's instructions or hospital protocol.
Cautions:
Do not immerse or rinse the MPC6171A/ MPC6171B and its peripherals. If you accidentally
spill liquid on the device, disconnect the unit from the power source. Contact your Biomed regarding the continued safety of the unit before placing it back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean the MPC6171A/ MPC6171B or its peripherals with strong aromatic, chlorinated, ketone, ether, or Esther solvents, sharp tools or abrasives. Never immerse
electrical connectors in water or other liquids.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
CHAPTER 2 GETTING STARTED
2.1 SYSTEM SET UP
System Set Up
The following is a summary of the steps in setting up the system for use.
(1). You can fix the system to a mounting fixture using the screw holes on the sides of the system.
(2). Make any required external connections such as the display, keyboard, and LAN.
(3). Plug the appropriate end of the power cord into the power connector on the rear of the system and
the plug to an electrical outlet.
(4). Press the power switch on the front panel of the system once to turn on the system power.
(5). If necessary, run the BIOS SETUP programs to configure the system.
Caution:
In order to boot up system from USB-CD/DVD drive, please connect USB-CD/DVD drive, turn on
computer power, keep on pressing "F11" key, go into BIOS quick boot menu, select "USB-CD ROM",
WAIT FOR 20
SECONDS, then press enter, system OS will boot up from USB-CD/DVD drive directly.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
2.2 DIMENSION
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
2.3
SYSTEM VIEW
From left to right:
1. Brightness down
2. Brightness up
3. Power
4. Volume down
5. Volume up
MPC6171A /MPC6172 models
do not have webcam hold.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
2.4
DISCONNECT DEVICE
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
CHAPTER 3 BIOS SETUP
3.1 BIOS Introduction
The Award BIOS (Basic Input/Output System) installed in your computer system's
ROM supports Intel processors. The BIOS provides critical low-level support for a
standard device such as disk drives, serial ports and parallel ports. It also adds virus
and password protection as well as special support for detailed fine-tuning of the
chipset controlling the entire system.
MPC6171A/ MPC 6171B
The Award BIOS provides a Setup utility program for specifying the system configurations and settings. The BIOS ROM of the system stores the Setup utility. When you
turn on the computer, the Award BIOS is immediately activated. Pressing the <Del> key
immediately allows you to enter the Setup utility. If you are a little bit late pressing the
<Del> key, POST (Power On Self Test) will continue with its test routines, thus preventing you from invoking the Setup. If you still wish to enter Setup, restart the system
by pressing the "Reset" button or simultaneously pressing the <Ctrl>, <Alt> and <Delete> keys. You can also restart by turning the system Off and back On again. The
following message will appear on the screen:
Press <DEL> to Enter Setup
In general, you press the arrow keys to highlight items, <Enter> to select, the <PgUp>
and <PgDn> keys to change entries, <F1> for help and <Esc> to quit.
When you enter the Setup utility, the Main Menu screen will appear on the screen. The
Main Menu allows you to select from various setup functions and exit choices.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
The section below the setup items of the Main Menu displays the
control keys for this menu. At the bottom of the Main Menu just below the control keys
section, there is another section, which displays information on the currently highlighted
item in the list.
Note: If the system cannot boot after making and saving system changes with Setup,
the Award BIOS supports an override to the CMOS settings that resets your system to
its default.
Warning: It is strongly recommended that you avoid making any changes to the chipset
defaults. These defaults have been carefully chosen by both Award and your system
manufacturer to provide the absolute maximum performance and reliability. Changing
the defaults could cause the system to become unstable and crash in some cases.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
STANDARD CMOS FEATURES
"Standard CMOS Features" choice allows you to record some basic hardware configurations in your
computer system and set the system clock and error handling. If the motherboard is already installed in a
working system, you will not need to select this option. You will need to run the Standard CMOS option,
however, if you change your system hardware configurations, the onboard battery fails, or the configuration stored in the CMOS memory was lost or damaged.
At the bottom of the menu are the control keys for use on this
menu. If you need any help in each item field, you can press the
<F1> key. It will display the relevant information to help you. The memory display at the lower right-hand
side of the menu is
read-only. It will adjust automatically according to the memory changed. The following describes each
item of this menu.
Date
The date format is:
Day : Sun to Sat
Month :
1 to 12
Date : 1 to 31
Year : 1999 to 2099
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
To set the date, highlight the "Date" field and use the PageUp/ PageDown or +/- keys to set the current
time.
Time
The time format is: Hour :
00 to 23
Minute :
00 to 59
Second :
00 to 59
To set the time, highlight the "Time" field and use the <PgUp>/
<PgDn> or +/- keys to set the current time.
IDE Channel Master/Slave
The onboard Serial ATA connectors provide Primary and Secondary channels for connecting up to four
Serial ATA hard disks. Each channel can support up to two hard disks; the first is the "Master" and the
second is the "Slave".
Press <Enter> to configure the hard disk. The selections include Auto, Manual, and None. Select
'Manual' to define the drive information manually. You will be asked to enter the following items.
Capacity :
Capacity/size of the hard disk drive
Cylinder :
Number of cylinders
Head : Number of read/write heads Precomp : Write precompensation Landing Zone :
Sector :
Number of sectors
Landing zone
The Access Mode selections are as follows:
CHS (HD < 528MB)
LBA (HD > 528MB and supports Logical Block Addressing)
Large (for MS-DOS only)
Auto
Remarks: The main board supports one serial ATA ports and are represented in this setting as IDE Channel 2.
Video
This field selects the type of video display card installed in your system. You can choose the following
video display cards:
EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default)
CGA 40
Power up in 40 column mode.
CGA 80
Power up in 80 column mode.
MONO
For Hercules or MDA adapters.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
Halt On
This field determines whether or not the system will halt if an error is detected during power up.
All errors
Whenever theBIOS detects a non-fatal error, the system will stop and you will be
prompted.
No errors
The system boot will not be halted for any error that may be detected.
All, But Keyboard
The system boot will not be halted for a keyboard error; it will stop for all other
errors
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
ADVANCED BIOS FEATURES
This section allows you to configure and improve your system and allows you to set up some system
features according to your preference.
CPU Feature
Press Enter to configure the settings relevant to CPU Feature.
Hard Disk Boot Priority
With the field, there is the option to choose, aside from the hard disks connected, "Bootable add-in
Cards" which refers to other external devices.
Virus Warning
If this option is enabled, an alarm message will be displayed when trying to write on the boot sector or on
the partition table on the disk, which is typical of the virus.
CPU L1 and L2 Cache
Cache memory is additional memory that is much faster than conventional DRAM (system memory).
CPUs from 486-type on up contain internal cache memory, and most, but not all, modern PCs have
additional (external) cache memory. When the CPU requests data, the system transfers the requested
data from the main DRAM into cache memory, for even faster access by the CPU. These items allow you
to enable (speed up memory access) or disable the cache function. By default, these items are
Enabled.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
CPU L3 Cache
Enabled or Disabled
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after the system is turned on. If it is set
to Enabled, BIOS will skip some items.
First/Second/Third Boot Device
These fields determine the drive that the system searches first for an operating system. The options
available include LS120, Hard Disk, CDROM, ZIP100, USB-Floppy, USB-ZIP, USB-CDROM, LAN
and Disable.
Boot Other Device
These fields allow the system to search for an OS from other devices other than the ones selected in
the First/Second/Third Boot Device.
Boot Up NumLock Status
This allows you to activate the NumLock function after you power up the system.
Gate A20 Option
This field allows you to select how Gate A20 is worked. Gate A20
is a device used to address memory above 1 MB.
Typematic Rate Setting
When disabled, continually holding down a key on your keyboard will generate only one instance. When
enabled, you can set the two typematic controls listed next. By default, this field is set to Disabled.
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, the system registers repeated keystrokes speeds. Settings
are from 6 to 30 characters per second.
Typematic Delay (Msec)
When the typematic rate is enabled, this item allows you to set the time interval for displaying the first
and second characters. By default, this item is set to 250msec.
Security Option
This field allows you to limit access to the System and Setup. The default value is Setup. When you
select System, the system prompts for the User Password every time you boot up. When you select
Setup, the system always boots up and prompts for the Supervisor Password only when the Setup utility
is called up.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
APIC Mode
APIC stands for Advanced Programmable Interrupt Controller. The default setting is Enabled.
MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version for your operating system. MPS
version 1.4 added extended configuration tables to improve support for multiple PCI bus configurations and
improve future expandability. The default setting is 1.4.
OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM memory when used with OS/2 that
depends on certain BIOS calls to access memory. The default setting is Non-OS/2.
Report No FDD For WIN 95
If you are using Windows 95/98 without a floppy disk drive, select
Enabled to release IRQ6. This is required to pass Windows
95/98's SCT test. You should also disable the Onboard FDC Controller in the Integrated Peripherals screen
when there's no floppy drive in the system. If you set this feature to Disabled, the BIOS will not report the
missing floppy drive to Win95/98.
Full screen Logo Show
The screen logo appears full of the monitor screen when the system is boot up. The default setting is
Enabled.
Small Logo (EPA) Show
The EPA logo appears at the right side of the monitor screen when the system is boot up. The default
setting is Disabled.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
ADVANCED CHIPSET FEATURES
This Setup menu controls the configuration of the chipset.
System BIOS Cacheable
The setting of Enabled allows caching of the system BIOS ROM at F000h-FFFFFh, resulting
in
better system
performance. However, if any program writes to this memory area, a system error
may result.
Memory Hole At 15M-16M
In order to improve performance, certain space in memory can be reserved for ISA cards. This memory
must be mapped into the memory space below 16 MB. The choices are Enabled and Disabled.
PCI Express Root Port Func
By default.
VGA Setting
The fields under the VGA Setting and their default settings are: PEG/On Chip VGA Control: Onchip VGA
On-Chip Frame Buffer Size: 8MB DVMT Mode: DVMT
DVMT/Fixed Memory Size: 128MB Boot Display: Auto
Panel Scaling: Auto
Panel Number: 4
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
INTEGRATED PERIPHERALS
This section sets configurations for your hard disk and other integrated peripherals.
OnChip IDE Device
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to transfer data to and from your
hard disk drive.
IDE DMA transfer access
This field allows your hard disk controller to use the fast block mode to transfer data to and from your
hard disk drive.
On-Chip Serial ATA Setting
The fields under the SATA setting includes On-Chip Serial ATA (Auto), PATA IDE Mode (Secondary)
and SATA Port (PO, P2 is Primary).
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for two IDE channels.
Select Enabled to activate each channel separately.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
ONCHIP SUPER IO DEVICE
Power ON Function
This field is related to how the system is powered on - such as with the use of conventional power button,
keyboard or hot keys. The default is BUTTON ONLY.
Onboard Serial Port
These fields allow you to select the onboard serial ports and their addresses. The default values for these
ports are:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
UART Mode Select
This field determines the UART 2 mode in your computer. The default value is Normal. Other options
include IrDA and ASKIR.
PWRON After PWR-Fail
This field sets the system power status whether on or off when power returns to the system from a
power failure situation.
USB Device Setting
USB 1.0 Controller
The options for this field are Enabled and Disabled. By default, this field is set to Enabled.
USB 2.0 Controller
The options for this field are Enabled and Disabled. By default, this field is set to Enabled. In order to
use USB 2.0, necessary OS drivers must be installed first. Please update your system to Windows 2000
SP4 or Windows XP SP2.
USB Operation Mode
The options for this field are Full/Low speed and High speed. By default, this field is set to High speed.
USB Keyboard Function
The options for this field are Enabled and Disabled. By default, this field is set to Enabled.
USB Mouse Function
The options for this field are Enabled and Disabled. By default, this field is set to Enabled.
USB Storage Function
The options for this field are Enabled and Disabled. By default, this field is set to Enabled.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
POWER MANAGEMENT SETUP
ACPI Function
Enable this function to support ACPI (Advance Configuration and
Power Interface).
ACPI Suspend
The default setting of the ACPI Suspend mode is S3(STR).
RUN VGABIOS if S3 Resume
The default setting of this field is Auto.
Power Management
This field allows you to select the type of power saving management modes. There are three
selections for Power Management.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
User Define
Each of the ranges is from 1 min. to 1hr. Except for HDD Power Down which ranges
from 1 min. to 15 min.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
Video Off Method
This field defines the Video Off features. There are three options.
Blank Screen
Writes blanks to the video buffer.
V/H SYNC + Blank Blank the screen and turn off vertical and horizontal scanning.
DPMS
Default setting, allows BIOS to control the video display.
Video Off In Suspend
When enabled, the video is off in suspend mode. The default setting is Yes.
Suspend Type
The default setting for the Suspend Type field is Stop Grant.
Modem Use IRQ
This field sets the IRQ used by the Modem. By default, the setting is 3.
Suspend Mode
When enabled, and after the set time of system inactivity, all devices except the CPU will be shut off. By
default, the setting is Disabled.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk drive will be powered down
while all other devices remain active.
Soft-Off by PWR-BTTN
This field defines the power-off mode when using an ATX power supply. The Instant Off mode allows
powering off immediately upon pressing the power button. In the Delay 4 Sec mode, the system powers
off when the power button is pressed for more than four seconds or enters the suspend mode when
pressed for less than 4 seconds.
Wake up by PCI Card
By default, this field is Enabled.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
Power On by Ring
This field enables or disables the power on of the system through the modem connected to the
serial port or LAN.
USB KB Wake-Up From S3
By default, this field is Disabled.
Resume by Alarm
This field enables or disables the resumption of the system operation. When enabled, the
user is allowed to set the Date and Time.
Reload Global Timer Events
The HDD, FDD, COM, LPT Ports, and PCI PIRQ are I/O events that can prevent the system from
entering a power saving mode or can awaken the system from such a mode. When an I/O device wants to gain the attention of the operating system, it signals this by causing an IRQ to
occur. When the operating system is ready to respond to the request, it interrupts itself and
performs the service.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
PNP/ PCI CONFIGURATIONS
This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.
Init Display First
The default setting is Onboard.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data or not. The default
value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices with the use of a PnP operating system such as Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly. This field allows you to
set whether or not MPEG ISA/VESA VGA cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/
VGA cannot work with an MPEG ISA/VESA card.
Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 128.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
PC HEALTH STATUS
This section shows the parameters in determining the PC Health Status. These
parameters include temperatures, fan speeds and voltages.
CPU Warning Temperature
This field allows the user to set the temperature so that when the temperature is
reached, the system sounds a warning. This function can help prevent damage to
the system that is caused by overheating.
CPU Smart Fan Temperature
This field allows the user to set the temperature so that when the temperature is
reached, the smart fan will speed up to cool the CPU temperature.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
Load Fail-Safe Defaults
This option allows you to load the troubleshooting default values permanently stored in
the BIOS ROM. These default settings are non-optimal and disable all high-performance features.
Load Optimized Defaults
This option allows you to load the default values to your system configuration. These
default settings are optimal and enable all high performance features.
Set Supervisor Password
These two options set the system password. Supervisor Password sets a password
that will be used to protect the system and Setup utility. User Password sets a
password that will be used exclusively on the system. To specify a password, highlight the type you want and press <Enter>. The Enter Password: message prompts on
the screen. Type the password, up to eight characters in length, and press <Enter>.
The system confirms your password by asking you to type it again. After setting a
password, the screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted to enter the
password. A message will confirm the password to be disabled. Once the password
is disabled, the system will boot and you can enter Setup freely.
Save & Exit Setup
This option allows you to determine whether or not to accept the modifications. If you
type "Y", you will quit the setup utility and save all changes into the CMOS memory. If
you type "N", you will return to Setup utility.
Exit Without Saving
Select this option to exit the Setup utility without saving the changes you have made
in this session. Typing "Y" will quit the Setup utility without saving the modifications.
Typing "N" will return you to Setup utility.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
APPENDIX
A. JUMPER SETTINGS AND CONNECTIONS
This appendix gives the definitions and shows the positions of jumpers, headers and connectors. All of
the configuration jumpers on MPC6171A/ MPC6171B are in the proper position.
Note: Some of jumpers or connectors will be removed base on system configuration.
A-1 Jumper location and list
In general, jumpers on the single board computer are used to select options for certain features. To
select any option, cover the jumper cap over (SHORT) or remove (NC) it from the jumper pins according to the following instructions.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
A-2 Connectors location and list
The connectors on the PCBA of MPC6171A/ MPC6171B are used to connect external devices such
as hard disk drives, printers, keyboard, serial ports, etc. Specifically, the PCBA of MPC6171A/
MPC6171B has the following connectors:
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
B. VESA MOUNTING
The MPC6171A/ MPC6171B also provides standard VESA mounting to help system integrators
conveniently integrate the panel PC into their system.
Never use any other mounting brackets except those provided by Wincomm to prevent the unreliable
fixing of MPC6171A/ MPC6171. VESA mount installation should be carried out by a professional
technician. Please contact the service technician or your retailer if you need this service.
Installation instructions follow:
1. The wall-mounting attachment is comprised of two parts: one back bracket, and one mounting
bracket.
2. First attach the back bracket to the rear cover of the MPC6171A/ MPC6171, securing it in place
with four of the Phillips-head screws provided.
3. Attach the mounting bracket to the wall or another flat surface. The back bracket slides vertically
from the top into the mounting bracket. It can be secured to the mounting bracket by screwing four of
the Phillips-head screws provided through the corresponding holes at the tops of the mounting
bracket.
Warning:
Be sure to secure the screws of the mounting bracket tightly. Injuries could result if the MPC6171A/
MPC6171 isn't properly secured to the mounting bracket.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.