Acoustic Research ARS3I Stereo System User Manual

v2.0 (1.0.2.0) (EN/F)
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
user manual
guide de l’utilisateur
ARS3i
It is important to read this user manual prior to using your new product for the first time.
Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit
pour la première fois.
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near
water.
• Clean only with dry cloth.
• Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
• Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
• Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
• Only use attachments/accessories
specified by the manufacturer.
Important information
Before you begin
EN/F
Technical information
Product: Digital Photo Frame for
iPhone/iPod
Brand: Acoustic Research
Model: ARS3i
For your records
In the event that service should be
required, you may need the model
number and the serial number. In the
space below, record the date and place
of purchase and the serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
“Made for iPod” and “Made for
iPhone” mean that an electronic
accessory has been designed to
connect specifically to iPod or iPhone,
respectively, and has been certified
by the developer to meet Apple
performance standards. Apple is not
responsible for the operation of this
device or its compliance with safety and
regulatory standards.
iPhone, iPod, iPod classic, iPod nano
and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other
countries.
Dear Acoustic Research customers,
Thank you for puchasing the Acoustic
Research digital photo frame for
iPhone/iPod. This product includes a 7”
(16:9 Aspect Ratio) TFT Liquid Crystal
Display (LCD) monitor, clock function,
music playback, photo function, video
function and support SD/MMC/MS
memory cards or USB flash drives.
This product plays mp3 and Windows
Media™ audio (WMA) content.
• Use only with the
]
cart, stand, tripod,
bracket, or table
specified by the
manufacturer,
Portable Cart Warning
or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
• Unplug this apparatus during
lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
ADDITIONAL SAFETY INFORMATION
• The AC/DC adapter supplied with
this product is intended to be
correctly oriented in a vertical or
floor mount position.
• Do not use unauthorized chargers
or power adapters. Use only
chargers or power adapters that
came with your product or that is
listed in the user’s guide.
• Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases,
Connect the main unit
power
• Connect the supplied power adapter
to the product’s DC 6V jack, and
connect to a convenient wall outlet.
To start using your digital photo frame
for iPhone/iPod, please follow the
instructions in the following sections.
You should find the following items in
the box:
• digital photo frame for iPhone/iPod
• AC/DC power adapter
• Rod support
• User manual
• muvee software CD ROM
AC/DC Adaptor:
Input: 100 -240 V AC, 50/60 Hz
Output: 6 V DC, 3A
Ecology
the apparatus.
• Attention should be drawn to the
environmental aspects of battery
disposal.
• The use of apparatus in moderate
climates.
Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.
that to which the receiver is
connected.
• Consult the dealer or an
experienced radio/TV technician for
help.
Changes or modifications not expressly
approved by Audiovox Electronics Corp.
could void the user’s authority to operate the
equipment.
Important battery
precautions
FCC Information
• Any battery may present a risk of
fire, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.
• Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
• If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
• Discard any leaky or deformed
battery immediately. They may
cause skin burns or other personal
injury.
• Please help to protect the
environment by recycling or
disposing of batteries according to
federal, state, and local regulations.
WARNING: The battery (battery or
batteries or battery pack) shall not
be exposed to excessive heat such as
sunshine, fire or the like.
Note: This equipment has been tested
and found to comply with the limits
for a Class B digital device, pursuant
to Part 15 of FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
This Class B digital apparatus c
omplies with Canadian ICES-003.
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
General controls
Unpacking the unit
Electrical power information
shall be placed on the apparatus.
• Always leave sufficient space around
the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air flow through vent
openings.
• Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
• Connect power cord only to AC
power source as marked on the
product.
• Care should be taken so that objects
do not fall into the product.
• Do not attempt to disassemble
the cabinet. This product does
not contain customer serviceable
components.
• The marking information is located
at the bottom of apparatus.
• To be completely disconnect the
power input, the AC/DC adaptor
of apparatus shall be disconnected
from the mains.
• AC/DC adaptor is a disconnect
device. The AC/DC adaptor should
not be obstructed OR should be
easily accessed during intended use.
• Battery shall not be exposed to
excessive heat such as sunshine, fire
or the like.
• The ventilation should not be
impeded by covering the ventilation
openings with items such as
newspaper, table-cloths, curtains etc.
• No naked flame sources such as
lighted candled should be placed on
• Once connected with power and
switch the ON/OFF button to ON,
the Main menu appears.
Battery back-up operation
Power failure indicator
This digital photo frame for iPhone/iPod
is equipped with a memory holding
system that can be powered with 2
“AAA” batteries (not included). The
power failure protection circuit will not
operate unless batteries are installed.
When normal household power is
interrupted, or AC/DC power adapter
is unplugged, the batteries will power
the digital photo frame to keep track of
time settings programmed into memory.
When AC power is interrupted
(disconnected) for a short period of
time, time settings will change (unless
batteries are installed). After AC power
is restored (reconnected), the Digital
Display will blink to indicate that
power was interrupted and you should
readjust the time settings.
Top view
– Go to Main menu
To install or replace the batteries:
1. Remove battery compartment door
(located at the rear of the digital
photo frame) by applying thumb
pressure to the tab on battery door
and then lift the door out and off
the cabinet.
2. Insert or replace 2 AAA batteries.
– Enter the selected mode; press
to play/pause music, photo and video
playback; press and hold to stop
playback and return to music list or
thumbnail mode
• It is recommended to plug the
unit for AC power while replacing
batteries to avoid the loss of clock
and mode settings.
Screw the rod support into the hole at
the rear to support the unit.
Universal dock for iPod
, ,
or
– Menu mode: press to navigate in
menus in the indicated directions
– Photo, music and video mode: press
or to skip to previous or next
file; press
or
to adjust the
volume
– Photo mode: press and hold or
to listen to previous or next music if
background music is on
3. Replace the compartment door.
Installing the rod support
Rod support
Front view
Speaker
Display
Universal dock for iPod
Back view
POWER ON/OFF– To turn on/off the
unit
Battery compartment – To install
2 x AAA batteries
EDIT – Enter or exit the pop-up Edit
menu
• Refer to the following pages for
more information on setting up
date, time, playing music and video
and viewing photos.
MUSIC ON/OFF – Turn on/off the
background music during slideshow in
Photo mode; turn on/off the music in
the music mode.
Windows Media is trademarks of Microsoft Corporation in the United States and other countries.
Music
General controls
Clock
Side view
Setting date and time
Connecting iPod/iPhone
1. In Main menu, press
1. Slide the speaker to the right to
open the universal dock for iPod.
iPod/iPhone
. Press
2. Press
or
or Time.
SD/MMC/MS
card slot
3. Press
USB connector
or
or
to select
to enter Settings menu.
to highlight the Date
to highlight the option.
or
to change the values
4. Press
and then press
to confirm.
DC jack
5. Press
or
Format.
Rod support
SD/MMC/MS card slot – To insert SD/
MMC/MS card
USB connector – To connect to USB
device
DC jack – Connect to the power
adapter
In Main menu mode, when
there is no operations for
about one minute, slideshow
will be automatically started. The
priority of photos to be displayed in
the slideshow is first photos on Card,
then USB devices and lastly photos
stored in the internal memory of the
unit (i.e. Favorites
to highlight the Time
6. Press or to change the values
and then press
to confirm.
7. Press
to exit Settings menu. You
can also press
or
to highlight
Exit to exit Settings menu.
Entering clock mode
1. In Main menu, press
or
to select
. Press
to enter Clock mode.
Clock and calendar will be displayed.
2. Slideshow will then be started. The
priority of photos to be displayed in
the slideshow is first photos on Card,
then USB devices and lastly photos
stored in the internal memory of the
unit (i.e. Favorites
Charging the iPod/iPhone
You may charge the battery of your
iPod/iPhone through the universal dock
for iPod while the unit is turned off
(standby mode) or in the Music, Photo,
Clock or iPod/iPhone mode. Charging
control should be operated on the iPod/
iPhone. It is not necessary to charge in
iPod mode, unless you are listening to
the iPod.
Listening to iPod/iPhone
• Dock your iPod/iPhone to the
universal dock.
• In Main menu, press
iPod/iPhone (
• Press
or
or select
press
.
or
to select
). Then press
to select
.
for music,
for photo or video and
• Playback of music file from the iPod/
iPhone starts automatically.
• Press or to skip to the previous
or next music file. Press and hold
or to search backward or forward
for a music file.
• Start playback of photo or video
files on your iPod/iPhone manually
first. The iPod/iPhone cannot play
video automatically.
• Use the controls on iPod/iPhone for
photo and video files playback.
• If no iPod/iPhone is connected
in the iPod mode, the unit will
show “The selected device is not
connected”.
Playing music
• The unit can only support
USB flash drive and
memory card which
formatted in file system of FAT
or FAT32.
• The supported music file formats
include mp3, WMA & WAV.
1. Insert an SD, MMC or MS card into
the SD/MMC/MS card slot or insert
a USB flash drive into the USB
connector.
2. In Main menu, press or
the source of music from
Card ( ), USB (
.
Then press
3. Press
.
or
to select
) or Favorites (
to select
).
and press
4. Press
or
to select the file you
want to play.
or MUSIC ON/OFF to start
5. Press
playback.
.
6. To pause the playback, press
Press
again to resume playback.
Press MUSIC ON/OFF to stop
playback.
Photo
Deleting music
Repeat
1. During playback of music files in
the internal memory of the unit (i.e.
1. During playback of music files on
SD, MMC or MS card, USB or music
files in internal memory of the
), press EDIT to enter
Favorites
the pop-up Edit menu.
or
to select Delete.
3. “Are you sure you want to delete
the selected file” will be displayed.
Press or to select Yes and then
press
to confirm.
4. “Delete successfully!” will be
displayed.
2. Press
or
to select from
Repeat one, Repeat all or Shuffle
.
and then press
3. Press EDIT or press
or
to
select Exit to exit the Edit menu.
5. Press EDIT or press
or
to
select Exit to exit the Edit menu.
on) and return to the thumbnail
screen.
JPEG is the only supported
photo file format.
1. Insert an SD, MMC or MS card into
the SD/MMC/MS card slot or insert
a USB flash drive into the USB
connector.
2. In Main menu, press or
the source of photo from
Card (
(
), USB (
) . Then press
3. Press
.
or
4. Press , ,
desired file.
5. Press
or
to adjust the volume.
9. Press
The volume bar
will
be displayed for a while once you
change the volume.
If no photos are found in
your selected source, “No file
in the selected device” will be
displayed.
) and Favorites
Settings
.
1. During slideshow playback, press
EDIT to pause slideshow and enter
the pop-up Edit menu.
to select
or
to select
and press
to highlight the
to start photo slideshow.
6. To pause the slideshow playback,
press
. Press
again to resume
playback.
7. Press or once to select the
previous/next photo file. Press and
hold or to skip to previous/next
music file if background music is on.
2. A pop-up menu shows:
• Rotate – Press
repeatedly to
rotate the current photo by 90O
clockwise each time.
• Zoom – Press
repeatedly to
zoom in the current photo. The
zoom in feature cycles through X2,
X3 and X4, then returns to normal
size.
• Effect – Press
or
to select
from Color enhancement, Black
and white, Old fashion and
to confirm.
Normal. Then press
8. Press and hold
to stop slideshow
and background music (if turned
• Copy
or
to select Copy and
• Press
.
then press
• “Copy to internal memory?
If the same file exist will be
overwritten.” will be displayed.
Press or to select Yes and
to confirm.
then press
• “Copy successfully!” will be
displayed. If the unit does not
have enough free internal
memory, “No enough memory”
will be displayed. Delete some
files before you try to copy files
again.
If the photo in the internal
memory is viewed now, the
“Copy” item is disabled
because the photo in the internal
memory cannot be copied to the
external memory. e.g. an SD card
• Delete – Refer to “Deleteing
photo” section below for details.
• Background music – Press
or
to select from iPod/iPhone,
USB, Memory Card and Favorites
to select playing music from which
source during slideshow. Select Off
to turn off background music. Then
press
to confirm. You can also
press MUSIC ON/OFF to turn on/
off the background music during
slideshow.
Settings
Video
2. Press
or
then press
to select Copy and
.
3. “Copy to internal memory? If the
same file exist will be overwritten.”
will be displayed. Press or to
select Yes and then press
to
confirm.
4. “Copy successfully!” will be
displayed. If the unit does not have
enough free internal memory, “No
enough memory” will be displayed.
Delete some files before you try to
copy files again.
If the video in the internal
memory is viewed now, the
“Copy” item is disabled
because the video in the internal
memory cannot be copied to the
external memory. e.g. an SD card
Deleting video
1. During playback of video files in the
internal memory of the unit (i.e.
), press EDIT to enter
Favorites
the pop-up Edit menu.
2. Press
or
to select Delete.
3. “Are you sure you want to delete
the selected file” will be displayed.
Press or to select Yes and then
press
to confirm.
4. “Delete successfully!” will be
displayed.
If no music files are found in
your selected source, “No file
in the selected device” will be
displayed.
Copying music
If the video in the internal
memory is viewed now, the
“Copy” item is disabled
because the video in the internal
memory cannot be copied to the
external memory. e.g. an SD card
1. During playback of music files on
SD, MMC or MS card or USB, press
EDIT to enter the pop-up Edit
menu. Press EDIT in the music list
before playback can also enter the
pop-up Edit menu.
2. Press
or
then press
to select Copy and
.
3. “Copy to internal memory? If the
same file exist will be overwritten.”
will be displayed. Press or to
to
select Yes and then press
confirm.
Settings options
1. During playback of video files on
SD, MMC or MS card, USB or video
files in internal memory of the
1. In Main menu, press
), press EDIT
unit (i.e. Favorites
to enter the pop-up Edit menu.
Press EDIT in the video list before
playback can also enter the pop-up
Edit menu.
or
to select from
2. Press
Repeat one and Repeat all and
then press
.
3. Press EDIT or press
or
to
select Exit to exit the Edit menu.
. Press
menu.
2. Press
or
to enter Settings
to highlight a setting.
to exit Settings menu.
Settings options available are:
• Image Display – To crop a photo
to fit the screen or adjust to
original aspect ratio.
• Slideshow Transition – To set
transition effect between two
photos. Options are: Random,
Blinds, Melt, Mosaic, Roll, Snail and
Float.
• Slideshow interval – To set the
interval between two photos.
Options are 5s, 15s, 30s and 60s.
• Brightness – To set the brightness
of the screen. Options are High, Mid
and Low.
Warranty information
to exit the pop-up
or
to
3. Press EDIT or press
select Exit to exit the Edit menu.
The effects of “Rotate”,
“Zoom” and “Effect” will
be automatically resumed
to normal when the next photo is
displayed during the slideshow.
Deleting photo
1. During playback of photos in the
internal memory of the unit (i.e.
), press EDIT to pause
Favorites
slideshow and enter the pop-up Edit
menu.
2. Press
or
to select Delete.
3. “Are you sure you want to delete
the selected file” will be displayed.
Press or to select Yes and then
to confirm.
press
4. “Delete successfully!” will be
displayed.
Viewing video
Card (
The PC requirements for
muvee software installation
are shown below:
1. Processor: Intel Pentium 4, AMD
Athlon 64 (or equivalent), 2GHz
or higher
2. Memory: 1GB RAM
3. Video memory: 128MB
4. Operating system: Microsoft
Windows 7, Microsoft Windows
Vista, Microsoft XP Service
Pack 3.
This digital photo frame only
plays motion JPEG generated
by muvee Reveal. Refer to
the user manual in the CD-ROM,
which is included in the package.
This manual provides instructions for
how to install the included muvee
Reveal software and instructions
about how to create a muvee file
and save it to the memory card or
USB flash drive.
1. Insert an SD, MMC or MS card into
the SD/MMC/MS card slot or insert
a USB flash drive into the USB
connector.
2. In Main menu, press or
the source of video from
• Date – To set the date.
Limited warranty
• Time – To set the time.
12 Month Limited Warranty
Applies to Acoustic Research Audio/
Video Products
to select
3. To change the value of date and
time, press or to highlight
or
the options and press
to change the values. Press
to confirm the date and time. To
change options other than date and
time, press or to change the
to confirm.
values and then press
4. Press
5. Press EDIT or press
or
to
select Exit to exit the Edit menu.
or
• Exit – Press
menu
to select
(
), USB (
) . Then press
3. Press
.
or
4. Press
or
desired file.
5. Press
) and Favorites
.
to select
and press
to highlight the
to start video playback.
6. To pause the video playback, press
. Press
again to resume
playback.
7. Press or to select the previous/
next file. Press and hold or to
rewind or fast forward.
8. Press and hold
to stop video
playback and return to the
thumbnail screen.
9. Press
or
to adjust the volume.
The volume bar
will
be displayed for a while once you
change the volume.
Copying video
1. During playback of video files on
SD, MMC or MS card or USB, press
EDIT to enter the pop-up Edit
menu. Press EDIT in the video list
before playback can also enter the
pop-up Edit menu.
Warranty information
Repeat
5. Press EDIT or press
or
to
select Exit to exit the Edit menu.
stored on the device. Also, it is
advisable to remove any personal
content which you would not want
exposed to others. IT IS LIKELY
THAT CONTENTS AND DATA ON
THE DEVICE WILL BE LOST DURING
SERVICE AND REFORMATTING.
AUDIOVOX ACCEPTS NO LIABILITY
FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY
PERSONAL CONTENT OR DATA ON
THE RETURNED DEVICE. Product
will be returned with factory
default settings, and without any
pre-loaded content which may have
been installed in the originally
purchased products. Consumer will
be responsible for reloading data
and content. Consumer will be
responsible to restore any personal
preference settings.
• Properly pack your unit. Include
any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials.
• Include evidence of purchase date
such as the bill of sale. Also print
your name and address and a
8. Press
or
to adjust the volume.
will
The volume bar
be displayed for a while once you
change the volume.
4. “Copy successfully!” will be
displayed. If the unit does not have
enough free internal memory, “No
enough memory” will be displayed.
Delete some files before you try to
copy files again.
or
to
5. Press EDIT or press
select Exit to exit the Edit menu.
Video
Viewing photo
unit (i.e. Favorites
), press EDIT
to enter the pop-up Edit menu.
Press EDIT in the music list before
playback can also enter the pop-up
Edit menu.
7. Press or to select the previous/
next file. Press and hold or to
rewind or fast forward.
Upgrade the latest iPod/
iPhone firmware from Apple
official website.
).
)
Music
2. Press
2. Place the appropriate adapter
provided with your iPod/iPhone and
then place your iPod/iPhone on the
universal dock for iPod/iPhone.
Made for:
• iPhone 3GS 16GB, 32GB
• iPhone 3G 8GB, 16GB
• iPod touch 3rd generation 32GB,
64GB
• iPod touch 2nd generation 8GB,
16GB, 32GB, 64GB
• iPod touch 1st generation 8GB,
16GB, 32GB
• iPod nano 5th generation 8GB
or 16GB
• iPod nano 4th generation
(video) 8GB, 16GB
• iPod nano 3rd generation
(video) 4GB, 8GB
• iPod classic 80GB, 120GB, 160GB
• iPod nano 2nd generation
(aluminum) 2GB, 4GB, 8GB
• iPod nano 1GB, 2GB or 4GB
• iPod 5th generation (video)
30GB, 60GB, 80GB
• iPod mini 4GB, 6GB
• iPod 4th generation 20GB, 40GB
• iPod 4th generation (color
display) 20GB, 30GB, 40GB, 60GB
• Time Format – To set the time
format (12 hours or 24 hours).
• OSD Language – To set the
language of the user interface.
Options are English, French and
Spanish.
• Reset Setting – To reset all settings
to factory default.
• About – To show the information
of the firmware and the model
number.
AUDIOVOX ELECTRONICS CORP. (the
Company) warrants to the original retail
purchaser of this product that should
this product or any part thereof, under
normal use and conditions, be proven
defective in material or workmanship
within 12 months from the date of
original purchase, such defect(s) will be
repaired or replaced with reconditioned
product (at the Company’s option)
without charge for parts and repair
labor.
• Exit – To go back to Main menu.
To obtain repair or replacement
within the terms of this Warranty, the
product is to be delivered with proof
of warranty coverage (e.g. dated bill
of sale), specification of defect(s),
transportation prepaid, to the Company
at the address shown below.
This Warranty does not extend to the
elimination of externally generated
static or noise, to correction of
antenna problems, loss/interruptions of
broadcast or internet service, to costs
incurred for installation, removal or
reinstallation of product, to corruptions
caused by computer viruses, spyware or
other malware, to loss of media, files,
data or content, or to damage to tapes,
discs, removable memory devices or
cards, speakers, accessories, computers,
computer peripherals, other media
players, home networks or vehicle
electrical systems.
This Warranty does not apply to any
product or part thereof which, in the
opinion of the Company, has suffered
or been damaged through alteration,
improper installation, mishandling,
misuse, neglect, accident, or by removal
or defacement of the factory serial
number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH
OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person or
representative is authorized to assume
for the Company any liability other than
expressed herein in connection with the
sale of this product.
Some states do not allow limitations on
how long an implied warranty lasts or
the exclusion or limitation of incidental
or consequential damage so the above
limitations or exclusions may not apply
to you. This Warranty gives you specific
legal rights and you may also have
other rights which vary from state to
state.
How to make a warranty claim:
• If your product is capable of storing
content (such as an mp3 player,
digital voice recorder, etc), it is
recommended to make periodic
backup copies of content stored
on the product. If applicable,
before shipping a product, make
a back up copy of content or data
Illustrations contained within this
publication are for representation only
and subject to change.
description of the defect. Send via
standard UPS or its equivalent to:
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-877-833-3491
For Canada Customers, please ship
to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5
The descriptions and characteristics
given in this document are given as
a general indication and not as a
guarantee. In order to provide the
highest quality product possible,
we reserve the right to make any
improvement or modification without
prior notice.
• Insure your shipment for loss or
damage. Audiovox accepts no
liability in case of damage or loss en
route to Audiovox.
• Pay any charges billed to you by
the Exchange Center for service not
covered by the warranty.
• A new or refurbished unit will be
shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our
option, a refurbished unit. The
exchange unit is under warranty for
the remainder of the original product’s
warranty period.
Visit http://store.audiovox.com to find
the best accessories for your products.
© 2010 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Trademark(s) ® Registered
Printed in China