Acu-Rite 13027 Clock User Manual

Instruction Manual
Intelli-Time® Alarm Clock
model 13027
CONTENTS
Unpacking Instructions............ 2
Package Contents................... 2
Product Registration................ 2
Features & Benefits.................. 3
Clock Setup............................ 4
Intelli-Time® Clock................... 4
Set the Time & Date................ 4
Using the Alarm Clock............. 5
Troubleshooting...................... 5
Care & Maintenance............... 6
Replace Intelli-Time® Battery.... 6
Specifications.......................... 6
FCC Information..................... 6
Customer Support................... 7
Warranty............................... 7
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Alarm clock
2. Instruction Manual
IMPORTANT
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
►Register a Product
2
Features & Benefits
FRONT OF CLOCK
1.PM Indicator
2. ALARM ON Indicator
2
1
3
4
5
6
8
7
TOP OF CLOCK
3.HI/LO Dimmer Switch
4.ALARM SET Button
5."–" Button
6."+" Button
7.TIME SET Button
8.ALARM ON/OFF Switch
9.SNOOZE Button
9
BOTTOM OF CLOCK
10. RESET Button
Full reset to factory
defaults
11.TIME ZONE Switch
12.DST ON/OFF Switch
13. Intelli-Time® Battery
Compartment
10
11
12
13
3
SETUP
Clock Setup
Plug the power cord into power outlet.
Intelli-Time® Clock
Intelli-Time clock and calendar are pre-programmed to the correct time and
date, and update automatically for Daylight Saving Time. All you need to do is
select your time zone using the “TIME ZONE” switch.
Set the Time & Date
Choose the correct time zone (AST HST AKST PST MST CST EST) using the
“TIME ZONE” switch on the bottom of the clock.
Set Daylight Saving Time ON or OFF using the “DST ON/OFF” switch on the
bottom of the clock.*
Press and hold the “TIME SET” button for 3 seconds to enter the SET MODE.
Once in the SET MODE the preference you are currently in will blink on the clock.
To adjust the currently selected (flashing) item, press and release the
“+ ” or “- ” buttons (press and HOLD to fast adjust). To save your adjustments,
press and release the “TIME SET” button to adjust the next preference. The
preference order is as follows:
CLOCK HOUR (Please note PM Indicator light)
CLOCK MINUTE
CLOCK MONTH
CALENDAR DATE
CALENDAR YEAR
You will automatically exit SET MODE if no buttons are pressed
for 5 seconds. Enter SET MODE any time by pressing and holding
“TIME SET” button for 3 seconds.
*If you live in an area that observes daylight saving time, DST should be set
to ON.
4
OPERATION
Using the Alarm Clock
Set the Alarm Time
To set alarm time, press and hold the “ALARM SET” button for 3 seconds to
enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “+” or
“–“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ALARM SET“ button to adjust
the next preference. The preference set order is as follows:
ALARM CLOCK HOUR (Please note PM Indicator light)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed
for 30 seconds. Enter ALARM SET MODE by pressing and holding the
“ALARM SET” button for 3 seconds.
Alarm Clock ON or OFF Function
To turn alarm on: Slide the “ALARM ON/OFF” switch to ON. The
ALARM ON indicator appears on the screen.
To turn alarm off: Slide the “ALARM ON/OFF” switch to OFF. The
ALARM ON indicator disappears from the screen.
Alarm Clock SNOOZE Function
The alarm will sound for 60 minutes before turning off when no button is
pressed. When the alarm is sounding, activate the 8 minute SNOOZE function
by pressing the SNOOZE button at the top of the alarm clock. SNOOZE
function can be activated up to 10 times before the alarm will no longer sound.
Troubleshooting
Clock is too dark,
hard to read or
doesn’t work
•R
eset the unit by pressing the RESET button located on
the bottom of the clock. This will reset the alarm to the
original factory settings. Time and date will need to be
entered after a reset.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
5
Care & Maintenance
Clock Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Replace Intelli-Time Clock Battery
Intelli-Time technology is powered
by a pre-installed coin-cell battery
that stores the time and date
settings. The battery has a shelf
life of several years. To replace
the Intelli-Time battery:
CR2032
3V
1. Locate the coin cell battery
compartment door on the
bottom of the clock. Unscrew
and remove the compartment cover.
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown.
Install battery with “+” positive terminal facing OUT.
3. Screw in the battery cover.
Specifications
POWER
AC power cord (120V)
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
6
Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this
product available and contact us in any of the following ways:
(877) 221-1252
info@chaney-inst.com
24/7 support at www.AcuRite.com
► Installation
Videos
► Register
your Product
► Instruction
Manuals
► Support
User Forum
► Replacement
Parts
► Submit
IMPORTANT
Feedback & Ideas
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to
be of good material and workmanship, and to
be free of defects when properly installed and
operated for a period of one year from the date
of purchase.
►Register a Product
warranty will not be breached, and Chaney will give no credit
for products it manufactures which have received normal wear
and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty
of fitness for a particular purpose. Chaney expressly disclaims
We recommend that you visit us at
liability for special, consequential or incidental damages,
www.AcuRite.com for the fastest way to register all
whether arising in tort or by contract from any breach of this
your product. However, product registration
warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation
does not eliminate the need to retain your
or exclusion may not apply to you. Chaney further disclaims all
original proof of purchase in order to obtain
liability from personal injury relating to its products to the extent
warranty benefits.
permitted by law. By acceptance of any of Chaney’s products,
Chaney Instrument Co. warrants that all products it manufactures the purchaser assumes all liability for the consequences arising
from their use or misuse. No person, firm or corporation is
to be of good material and workmanship, and to be free of
authorized to assume for Chaney any other liability in connection
defects when properly installed and operated for a period of
with the sale of its products. Furthermore, no person, firm or
one year from the date of purchase. Remedy for breach of this
corporation is authorized to modify or waive the terms of this
warranty is limited to repair or replacement of the defective
paragraph, and the preceding paragraph, unless done in writing
item(s). Any product which, under normal use and service, is
and signed by a duly authorized agent of Chaney. This warranty
proven to breach the warranty contained herein within ONE
gives you specific legal rights, and you may also have other
YEAR from date of sale will, upon examination by Chaney,
rights which vary from state to state.
and at its sole option, be repaired or replaced by Chaney.
Transportation costs and charges for returned goods shall
For in-warranty claims:Chaney Instrument Co.
be paid for by the purchaser. Chaney hereby disclaims all
965 Wells St., Lake Geneva, WI 53147
responsibility for such transportation costs and charges. This
7
Weather
Stations
Temperature
& Humidity
Weather
Alert Radio
Kitchen
Thermometers
& Timers
Clocks
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with confidence™.
www.AcuRite.com
Printed in China
13027W5 INST 121714
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners. AcuRite uses patented
technology. Visit www.AcuRite.com/patents for details.