Instruction manual | Acu-Rite 832 Marine Radio User Manual

Instruction Manual
Weather Forecaster
model 00832
CONTENTS
Unpacking Instructions............ 2
Package Contents................... 2
Product Registration................ 2
Features & Benefits: Sensor...... 2
Features & Benefits: Display..... 3
Setup..................................... 4
Install or Replace Batteries...... 4
Temperature Units................... 4
Placement Guidelines.............. 5
Using the Forecaster............... 6
Troubleshooting...................... 7
Care & Maintenance............... 8
Specifications.......................... 8
FCC Information..................... 8
Customer Support................... 9
Warranty............................... 9
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit with tabletop stand
2. Outdoor sensor
3. Instruction Manual
IMPORTANT
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
►Register a Product
Features & Benefits
1
OUTDOOR SENSOR
2
1. Integrated Hanger
For easy placement.
4
2. Wireless Signal Indicator
Flashes when data is being sent to the display unit.
3. Battery Compartment
3
4. Battery Compartment Cover
2
Features & Benefits
13
12
11
10
6
1
2
5
3
9
8
4
7
DISPLAY UNIT FRONT
DISPLAY UNIT BACK
1. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data
7. Battery Compartment Cover
8. Battery Compartment
from the outdoor sensor to generate your
personal forecast.
9. Display Kickstand for
tabletop placement
2. Current Outdoor Temperature
Arrow icon indicates direction
10.RE-SYNC Button
Resets current temperature and high/
temperature is trending.
3. Current Indoor Temperature
Arrow icon indicates direction
temperature is trending.
11.MAX/MIN Button
Press to view maximum/minimum 4. Display Low Battery Indicator
records.
5. Sensor Low Battery Indicator
˚
Select˚degrees Celsius or degrees
12. C/ F Switch
6. Pressure Trend Indicator
low records for outdoor temperature.
Arrow icon indicates direction
pressure is trending.
Fahrenheit temperature units.
13.Integrated Hang Hole
3
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
1. S
lide off the battery compartment
cover.
2. Insert 2 x AA batteries into the battery
compartment, as shown. Follow the
polarity (+/-) diagram in the battery
compartment.
3. R
eplace the battery cover.
Display Unit
1. S
lide off the battery compartment
cover.
2. Insert 2 x AA batteries into the battery
compartment, as shown. Follow the
polarity (+/-) diagram in the battery
compartment.
3. R
eplace the battery cover.
Select Degrees Fahrenheit or Celsius
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units,
press the “ºC/ºF” button located on the back of the display unit.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
4
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display unit and outdoor sensor are critical to the
accuracy and performance of this product.
Display Unit Placement
Place the display unit in a dry area free of dirt and dust.
Display unit stands upright for tabletop use or is wallmountable.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor
use, however, to extend its life place the sensor in an area
protected from direct weather elements.
Hang the sensor using the integrated hang holes or hanger, or
by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet
above the ground with permanent shade and plenty of fresh air
to circulate around the sensor.
Important Placement Guidelines
•To ensure accurate temperature measurement, place units out of direct sunlight and away from heat sources or vents.
•Display unit and outdoor sensor must be within 165 ft (50 m) of each other.
•To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
•To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).
(165 feet maximum)
(50 meters)
Setup is Complete
The sensor will now synchronize with the display unit. It may take a few
minutes for synchronization to complete. Please refer to the troubleshooting
section of this manual if anything appears to be functioning improperly.
5
OPERATION
Using the Weather Forecaster
Learning Mode
Self-Calibrating Forecasting use a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At
this point, the self-calibrated pressure is tuned in to your location and the unit is
ready for superior weather prediction.
Weather Forecast
AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast
of weather conditions for the next 12 to 24 hours by collecting data from
the sensor in your backyard. It generates a forecast with pinpoint accuracy personalized for your exact location.
RAIN/SNOW
MIX LIKELY
SNOW
LIKELY
LIGHT RAIN
LIKELY
CLOUDY
PARTLY
CLOUDY
SUNNY
View the complete list of icons at www.AcuRite.com/acurite-icons
High/Low Records
High and low values are recorded for indoor and outdoor temperature. The
high and low records automatically clear every 24 hours since the initial
battery installation.
To view the HIGH temperature record, press and release the “MAX/MIN”
button on the back of the display. The “MAX” icon appears on the display next
to the high records.
To view the LOW temperature record, press and release the “MAX/MIN”
button twice on the back of the display. The “MIN” icon appears on the
display next to the low records.
To manually reset the high/low records, press and hold the “MAX/MIN”
button on the back of the display while viewing the records you wish to clear.
Dashes display to confirm you have cleared the records.
6
Troubleshooting
Problem
No outdoor sensor
reception
no bars
Outdoor
t emperature
is flashing or
showing dashes
Possible Solution
If the wireless signal indicator shows no bars:
•R
elocate the display unit and/or the outdoor sensor.
The units must be within 165 ft (50 m) of each other.
•M
ake sure both units are placed at least 3 feet (.9
m) away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
•U
se standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. B
ring both the sensor and display unit indoors and
remove at least one battery from each.
2. Reinstall the battery in the outdoor sensor.
3. Reinstall the battery in the display unit.
4. L et the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
Inaccurate
temperature
or humidity
• Make sure both the display unit and sensor are placed
out of direct sunlight and away from any heat sources
or vents (see page 5).
•M
ake sure both units are positioned away from
moisture sources (see page 5).
Inaccurate forecast
• The Weather Forecast icon predicts conditions for the
next 12 to 24 hours, not current conditions.
•H
as Learning Mode icon disappeared from the
display unit? Learning Mode must complete before
forecast and pressure will be accurate.
•A
llow unit to run continuously for 33 days. Battery
removal or resetting the display unit will restart
Learning Mode. After 14 days, forecast should be
fairly accurate, however Learning Mode calibrates for
a total of 33 days.
Display screen
not working
•C
heck that the batteries are installed correctly.
Batteries may need to be replaced.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
7
Care & Maintenance
Display Unit Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Outdoor Sensor Care
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Specifications
TEMPERATURE RANGE
Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
WIRELESS RANGE
165 ft / 50 m depending on home construction materials
WIRELESS FREQUENCY
433 MHz
POWER
4 x AA alkaline or lithium batteries (not included)
DATA REPORTING
30 second updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
8
Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this
product available and contact us in any of the following ways:
(877) 221-1252
info@chaney-inst.com
24/7 support at www.AcuRite.com
► Installation
Videos
► Register
your Product
► Instruction
Manuals
► Support
User Forum
► Replacement
Parts
► Submit
IMPORTANT
Feedback & Ideas
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to
be of good material and workmanship, and to
be free of defects when properly installed and
operated for a period of one year from the date
of purchase.
►Register a Product
warranty will not be breached, and Chaney will give no credit
for products it manufactures which have received normal wear
and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty
of fitness for a particular purpose. Chaney expressly disclaims
We recommend that you visit us at
liability for special, consequential or incidental damages,
www.AcuRite.com for the fastest way to register all
whether arising in tort or by contract from any breach of this
your product. However, product registration
warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation
does not eliminate the need to retain your
or exclusion may not apply to you. Chaney further disclaims all
original proof of purchase in order to obtain
liability from personal injury relating to its products to the extent
warranty benefits.
permitted by law. By acceptance of any of Chaney’s products,
Chaney Instrument Co. warrants that all products it manufactures the purchaser assumes all liability for the consequences arising
from their use or misuse. No person, firm or corporation is
to be of good material and workmanship, and to be free of
authorized to assume for Chaney any other liability in connection
defects when properly installed and operated for a period of
with the sale of its products. Furthermore, no person, firm or
one year from the date of purchase. Remedy for breach of this
corporation is authorized to modify or waive the terms of this
warranty is limited to repair or replacement of the defective
paragraph, and the preceding paragraph, unless done in writing
item(s). Any product which, under normal use and service, is
and signed by a duly authorized agent of Chaney. This warranty
proven to breach the warranty contained herein within ONE
gives you specific legal rights, and you may also have other
YEAR from date of sale will, upon examination by Chaney,
rights which vary from state to state.
and at its sole option, be repaired or replaced by Chaney.
Transportation costs and charges for returned goods shall
For in-warranty claims:Chaney Instrument Co.
be paid for by the purchaser. Chaney hereby disclaims all
965 Wells St., Lake Geneva, WI 53147
responsibility for such transportation costs and charges. This
9
10
11
Weather
Stations
Temperature
& Humidity
Weather
Alert Radio
Kitchen
Thermometers
& Timers
Clocks
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with confidence™.
www.AcuRite.com
Printed in China
00838 INST 102214
©2012 Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners. Patent numbers: 5,978,738;
6,076,044; 6,597,990; US 7,637,141 B2
Download PDF

advertising