Instruction manual | Acu-Rite 948 Building Set User Manual

Instruction Manual
Digital Kitchen Scale
model 00948
CONTENTS
Package Contents................... 2
Customer Support................... 2
Features & Benefits.................. 3
Setup..................................... 4
Install or Replace Battery......... 4
Set the Measurement Units...... 4
Using the Scale....................... 5
Troubleshooting...................... 7
Care & Maintenance............... 7
Specifications.......................... 7
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Package Contents
1. Scale
2. Measuring bowl
3. Instruction Manual
Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this
product available and contact us in any of the following ways:
(877) 221-1252
info@chaney-inst.com
24/7 support at www.AcuRite.com
► Installation
Videos
► Register
your Product
► Instruction
Manuals
► Support
User Forum
► Replacement
Parts
► Submit
2
Feedback & Ideas
Features & Benefits
TOP
1
TOP
2 3 4
1. ON/OFF ZERO Button
Powers the scale ON or
OFF, and used for Tare
function.
2.Display
3. Measuring Bowl
4. MODE Button
Toggle between weight,
milk and water weighing
modes.
DISPLAY
5. Tare Indicator
6. Minus Indicator
DISPLAY
5
6
7
Weight of item(s)
removed from the scale.
8
9
10
11
15
14
13
12
3
7. Current Weight
8. Weight Units Grams (g)
9. Weight Units Milliliters
(ml)
10.Weight Units Fluid
Ounces (fl'oz)
11. Weight Units Pounds/
Ounces (lb:oz)
12.Indicates Water
Weighing Mode is
Selected
13.Indicates Milk
Weighing Mode is
Selected
14.Indicates Standard
Weighing Mode is
Selected
15.Zero Indicator
SETUP
Install or Replace Battery
1. R
emove the battery compartment cover.
2. P
ull the plastic tab below the battery (if applicable) to remove it and discard
the tab.
3. Insert 1 x 3V CR2032 lithium battery into the battery compartment, as
shown. Follow the polarity (+/-) diagram in the battery compartment.
4. R
eplace the battery cover.
2
Remove
Plastic Tab
CR2032
+
1
+
CR2032
3
Remove
Battery Cover
Install Battery
1 x 3V CR2032
lithium battery
Set the Measurement Units
While you are weighing an item, press the Unit Conversion button, located
on the bottom of the scale, to toggle between grams/milliliters (g/ml) and
pounds/ounces (lb/ oz).
4
OPERATION
Using the Scale
Measure Weight
1.Place the scale and measuring bowl on a flat, stable surface.
2.Press the "ON/OFF ZERO" button.
3.Wait for the display to show "0".
4.Press the "MODE" button to toggle between weighing modes*.
Weighing modes include: WEIGHT (default), WATER and MILK
5.Place item(s) or liquid to be weighed into bowl or directly on the scale.
6.Weight or volume will be shown on the display.
*It is important to select the correct mode because different items have
varying densities.
Zero & Tare Functions
To measure items as they are added, use the Zero and Tare Functions. If the
weight of the items being measured is below 4% of the scale’s capacity (less
than 0.2kg/0.4lb), the Zero function is used. If the weight of the items exceeds
4% of the scale’s capacity, the Tare function is used.
1.Place the first item(s) on the scale.
2.Without removing the item(s), press "ON/OFF ZERO" button to reset
display to "0".
3.Depending on the weight of the item(s), you will see the Zero indicator
"O" or the Tare indicator "T" on the display.
4.With the first item still in place, add the next item to the scale. The
display will now show the weight of that item.
5.Press "ON/OFF ZERO" to view the combined weight of the two items.
6.Press "ON/OFF ZERO" again to reset the display to "0".
7.Repeat these steps (4-6) until all items have been added.
Minus Function
If you add multiple items to the scale at one time to get a total weight, you can
measure the weight of a single item or ingredient by using the Minus Function:
1.Add item(s) to the scale.
2. Total weight will be shown on the display.
3.Press "ON/OFF ZERO" button to reset the display to "0".
4.Remove an item.
5.Value shown on the display with the with the Minus Function indicator (–)
indicates the weight of the removed item.
5
6.Press "ON/OFF ZERO" button to view the total weight of any remaining
items on the scale.
7.Repeat these steps (4-6) as needed.
Warning Messages
Replace battery (see page 4).
Maximum capacity has been exceeded. Remove
items to prevent damage.
Power the Scale ON/OFF
The scale will automatically power off when the display shows "0" or the
same weight for 2 minutes. Press "ON/OFF ZERO" to power the scale on. To
power off manually, press "ON/OFF ZERO" when the display is showing "0".
Press and HOLD "ON/OFF ZERO" for 3 seconds if a weight is showing on the
display.
Storage
The scale should be stored in a cool, dry place.
6
Troubleshooting
Problem
Display screen
not working
Possible Solution
•C
heck that the battery is installed correctly. Battery
may need to be replaced.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Care & Maintenance
Store in a dry location at room temperature. Clean with a soft, damp cloth.
DO NOT immerse in water or use caustic cleaners or abrasives. All parts
should be wiped clean immediately after direct contact with foods. Avoid
contact with acids and citrus juices. Use the scale on a hard, flat surface. DO
NOT strike, shake or drop the scale. Scale is not designed for commercial use.
Specifications
MAX WEIGHT CAPACITY
5 kg / 11 lb
POWER
3V CR2032 lithium battery
7
Weather
Stations
Temperature
& Humidity
Weather
Alert Radio
Kitchen
Thermometers
& Timers
Clocks
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with confidence™.
www.AcuRite.com
Printed in China
00948 INST 010214
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners. AcuRite uses patented
technology. Visit www.AcuRite.com/patents for details.
Download PDF

advertising