Instruction manual | ADTRAN XS027 Satellite Radio User Manual

Sound System Deluxe Portable Boom Box
Rotating Console
CD player and AM/FM
radio on side Satellite radio receiver
and remote control on
the flip side!
> CD Player with CDRW
and MP3 Playback
> AM/FM Radio
with 10 Presets
Instruction
Manual
Model XS027
To activate your Satellite Radio Receiver or for latest news and questions regarding
SIRIUS® Satellite Radio service visit sirius.com or call 1-888-539-SIRIUS (7474).
For accessory & product information visit us at www.getxact.com.
KEEPONLISTENING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the Manufacturer for compliance could void the user’s
authority to operate the equipment.
COPYRIGHT / TRADEMARKS
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by
any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of
the publisher.
© 2004 SIRIUS® Satellite Radio Inc. "SIRIUS" and the SIRIUS® dog logo are registered trademarks of SIRIUS®
Satellite Radio Inc. To activate your Satellite Radio Receiver or for latest news and questions regarding
SIRIUS® Satellite Radio service visit sirius.com or call 1-888-539-SIRIUS (7474).
SAFETY PRECAUTIONS
Cautions and Warnings
Follow these warnings and safety considerations, serious accidents and/or personal injury can be avoided:
1. Within the home, do not install the Sound System Deluxe Portable Boom Box in a position that obstructs
viewing of any home entertainment component, such as television or stereo system indicators and displays.
2. Do not install or use the Sound System Deluxe Portable Boom Box in locations exposed to direct sunlight,
or in areas subject to extreme temperatures; do not operate the unit in moist areas, in rain, or in areas
adjacent to water such as pools, hot tubs, etc.
3. When outdoors, position the Sound System Deluxe Portable Boom Box and antenna where there are no
obvious satellite signal obstructions such as high terrain, trees, overhangs, etc.
4. When installed indoors, unplug the AC Power Adapter from the wall outlet when the Sound System Deluxe
Portable Boom Box is not to be used for an extended period of time. If batteries are installed, set the Power
On/Off- VOL control to the Off position to prevent unintentional battery discharge, or remove the batteries.
5. To avoid possible damage to the Sound System Deluxe Portable Boom Box caused by battery leakage, it is
recommended that the batteries be removed when the Boom Box is not being used for an extended period
of time.
6. Do not install or place the Sound System Deluxe Portable Boom Box on an inclined or unstable surface.
7. By adhering to these warnings and safety considerations, serious accidents and/or personal injury can be
avoided.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Dangerous Voltage
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Attention
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Danger
This product utilizes a Class 1 laser to read COMPACT discs. This laser Compact Disc Player is equipped
with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated.
Invisible hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
Please do not attempt to defeat or bypass the safety switches.
FCC Warning
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Surge Protectors
It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered
under warranty for this product.
SAFETY PRECAUTIONS
Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receive is connected.
Consult the dealer or an experienced radio/TV technician for help.
Do not open the CD compartment while the CD is rotating.
Always keep the CD compartment closed when not in use.
Keep all foreign objects out of the CD compartment.
Place the unit on a stable surface.
Avoid installing the unit in locations described below:
•
•
•
•
•
Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
On top of other stereo equipment that radiates too much heat.
Placed lacking ventilation or dusty places.
Places subject to constant vibration.
Humid or moist places.
Dear Customer
Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical
enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the
most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear
without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound
can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sounds and "normal"
can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you
listening for a lifetime.
We Want You Listening For A Lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage
from loud noise is often undetectable until it is too late ,this manufacturer and the Electronic Industries
Association's Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise.
This list of sound levels is included for your protection.
THE FOLLOWING NOISES CAN BE DANGEROUS
UNDER CONSTANT EXPOSURE:
We
Want You
For A Lifetime
NI
C
IND
U
TR
S
N
EST. 1924
IES
A
S
Information courtesy of the Deafness Research Foundation.
O
EIA
R
140
180
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers,
thunderclap
Gunshot blast, jet engine
LISTENING
Rocket launching pad
ELECT
90
100
120
S
Decibel
Level
Example
30
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from
traffic
50
Light traffic, normal conversation, quiet office
60
Air conditioner at 20 feet, sewing machine
70
Vacuum cleaner, hair dryer, noisy restaurant
80
Average city traffic, garbage disposals, alarm
clock at two feet
O
O C I A TI
TABLE OF CONTENTS
Introduction
Product Overview
Package Contents
Components Guide
Boom Box Setup
Installing the Satellite Antenna
Installing the Power Cable
Installing the Batteries (Optional)
Antenna Aiming
SIRIUS® Satellite Map
AM/FM Radio Operation
To Listen to the Radio
Antennas
Auto Scan
To set and Receive a Station into Memory
CD Operation
To Insert and Play a CD
CD Playback Notes
To Pause a CD
To Begin Playback from a Specific Track
Forward/Reverse Skip Track
High-Speed Music Search
Repeat Playback of One Track
Repeat Playback of All Tracks
Repeat Playback of a Folder (MP3 with folders only)
Intro Playback (will play the first 10 seconds of each track)
To Randomly Play Back a CD
To Program the Memory (Up to 24 Tracks)
Notes of Program Playback
MP3 FAQ's - Frequently Asked Questions
Single Session
Multi Session
Specifications
Problem Solving
Care and Maintenance
Warranty
1
8
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
2
2
2
3
5
6
6
7
8
8
9
9
9
9
9
10
10
10
11
11
11
12
12
12
13
13
13
13
14
14
15
15
16
17
19
21
INTRODUCTION
Product Overview
Thank you for purchasing this product! Your new Xact Sound System Deluxe Portable Boom Box is
specifically designed for the XTR1 Xact Stream | jockey SIRIUS® Radio Receiver.
Package Contents
Carefully unpack your kit box and ensure that you have the following items.
•
•
•
•
Xact Sound System Deluxe Portable Boom Box
12v DC Power Adapter
Antenna
User’s Guide
In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.
Your Xact Sound System Deluxe Portable Boom Box must be used in conjunction with The XTR1 Xact
Stream | jockey SIRIUS® Radio Receiver. Please see these other available accessories below.
•
•
•
•
•
•
Xact
Xact
Xact
Xact
Xact
Xact
Vehicle Kit:
Home Kit:
Universal Kit:
Sound Pad Portable Boom Box:
Sound System Portable Boom Box:
Power Pod Portable Battery Pack:
Model
Model
Model
Model
Model
Model
Number
Number
Number
Number
Number
Number
XS021
XS022
XS01UK
XS024
XS025
XS028
The easiest way to activate your Satellite Radio Receiver is to log on to sirius.com.
You may also call 1-888-539-SIRIUS (7474).
1
2
COMPONENTS GUIDE
Sound System Deluxe Portable Boom Box
The Xact Sound System Deluxe Portable Boom Box provides Control buttons for CD Player, AM/FM digital
tuner. Power On/Off-Volume control and a Slide switch to toggle between Satellite Radio and other audio
signal. A power-on LED is also located on the front panel.
1. POWER ON/OFF
VOLUME CONTROL
3. HEADPHONE JACK
2. SAT/AUDIO
SLIDE SWITCH
4. DC POWER JACK
5. AUX INPUTJACK
6. AUX OUTPUTJACK
7. SAT ANT JACK
RIGHT SPEAKER (REAR)
LEFT SPEAKER (REAR)
1.
2.
3.
4.
5.
6.
7.
Power On/Off Switch-VOL Control:Applies power to the Boom Box when rotated clockwise (CW)
from the Off position. When in On position, increases or decreases the volume of the audio output
signal from the Boom Box. To increase the volume level, rotate the control CW. To decrease the
volume level, rotate the control counterclockwise (CCW).
SAT/Audio Selector: Slide between Satellite Radio and an audio signal( CD, AM/FM, AUX).
Headphones Jack: Accepts a stereo headphone jack to provide private listening capability for the
Boom Box.
DC Power jack: Plug in the DC Power Adapter output (included) into the DC 12V jack. The batteries
are automatically bypassed.
AUX Input Jack: Accepts an audio input signal from an external audio device. When using AUX audio
input, the Receiver will be automatically shut off to preserve battery power. Adjust the volume level of
the external audio device to obtain an audio output from the Boom Box. The volume control on the
external audio device should be set to mid-range.
AUX Output Jack: Connect audio jack (not included) if you want to listen the Satellite radio signal,
CD audio signal or AM/FM radio signal by your other audio system. Adjust volume level on your audio
system.
Satellite Antenna Jack: Connect satellite antenna terminal. (included).
3
2
COMPONENTS GUIDE
Sound System Deluxe Portable Boom Box
12. SKIP- / TUNNING DOWN
11. PROGRAM / MEMORY
BUTTON
10. MODE BUTTON
13. SKIP+ / TUNNING UP
8.
14. STOP / PRESET DOWN
15. PLAY / PAUSE PRESET UP
9. ALBAM / BAND BUTTON
16. PUSH OPEN
8. FUNCTION BUTTON
17. LCD DISPAY
9.
10.
11.
12.
13.
14.
18. RELEASE BUTTON FOR
SATELLITE RECEIVER
15.
19. RELEASE BUTTON FOR
REMOTE CONTROL
16.
17.
18.
19.
20.
20. CONNECTOR FOR
SATELLITE RECEIVER
3
4
Function button: Push to select a function from
CD/TUNER/AUX.
Album/Band button: Tuner mode: Push to select
AM or FM band. CD mode: CD audio: No function.
MP3 CD: Album (Directory) select.
Mode button: Tuner mode: Push to select FM
Mono/Stereo, CD mode: Push to select repeat1/
repeat all/intro/random. MP3 CD: push to select
repeat1/repeat Album/repeat/all/intro/random.
Program/Memory button: Tuner mode: Preset
memory. CD mode: Program track.
Skip-/Tuning down: Tuner mode: Tuning
downward. CD mode: Skip track downward.
Skip+/Tuning up: Tuner mode: Tuning upward.
CD mode: Skip track upward.
Stop/Preset down: Tuner mode: Preset downward.
CD mode: Stop play. Cancel program.
Play/Pause/Preset up: Tuner mode: Preset upward.
CD mode: Start and Pause playback memory.
CD mode: Program track.
LCD Display.
Push open button: Push open and close the CD
door.
Release button: For Satellite receiver.
Release button: For remote control.
Connector: For remote control.
BOOM BOX SETUP
To set up your Xact Sound System Deluxe Portable Boom Box.
Place the Stream | Jockey Satellite Receiver in the cradle as shown so that the guides are lined up with the
Boom Box cradle. Then rotate the receiver forward to engage the connectors. The receiver will lock in place.
Turn on the power by rotating the VOL control clockwise from the off position.
1.
PUSH RECEIVER ONTO
CONNECTOR
3.
2.
LATCH BOOMBOX LOCKS
RECEIVER IN PLACE
5
ROTATE RECEIVER AND
CONNECTOR INTO BOOMBOX
Installing the Satellite Antenna
Install the Antenna into the Antenna Jack as shown.
Installing the Power Cable
Install the adapter into the Power Jack as shown.
SAT ANT JACK
6
5
Installing Batteries (optional)
Your Boom Box can also be used with 8 D-Cell batteries as shown:
1. Push the battery cover latches down and flip up the battery compartment covers to the open position.
2. Insert the 8 D-Cell batteries follow the battery polarity as shown; then close the cover.
Note: The batteries are bypassed automatically whenever the supplied DC Adapter is plugged into the
power jack on the back of the Boom Box.
7
Antenna Aiming feature found on the Stream | jockey receiver.
To access the Antenna Aiming Feature:
Press the
button on the Stream | jockey receiver’s key pad. Press the
Antenna Aiming selection and press
button.
or
button to scroll to the
Menu Options
FM Transmitter
Channel Add/Skip
Lock Options
Audio Level
Antenna Aiming
Upon entering this option, two 10-segment horizontal bar graphs are displayed with a (-) sign to the left and a
(+) sign to the right. One is label “SAT” (satellite signal strength) and the other “TER” (terrestrial signal
strength). The current setting is indicated on the bar graphs. Rotate the Antenna to receive greater antenna
strength. (See SIRIUS® satellite map bellow).
Antenna Aiming
SAT -
+
TER -
+
SIRIUS® Satellite Map
Due to the paths of SIRIUS® satellites over the US, the best location for the antenna in your home depends on
where you live. Use the map below as a general placement guideline.
Area 1 : Place the antenna at an EAST facing window.
Area 4 : Place the antenna at a WEST or NORTH - facing window.
Area 2 : Place the antenna OUTSIDE,
away from any overhead obstructions.
Area 5 : Place the antenna at a NORTH facing window.
Area 3 : Place the antenna at a NORTH
WEST - or WEST - facing window.
Area 6 : Place the antenna at a NORTH or EAST - facing window.
8
AM/FM RADIO OPERATION
To Listen To The Radio
1.
2.
3.
4.
Push the FUNCTION button to the RADIO Position. Press the ALBUM / BAND button to Select a band
(AM or FM). If listening to FM, Press the MODE button to select Stereo or Mono.
Press and release the Skip/TUNING DN (12) or UP (13) button to tune a station. Press and hold the
Skip/TUNING DN (12) or UP (13) button for rapid search tuning.
Adjust the VOLUME control. If FM STEREO reception is weak/noisy, press the MODE/ button (10) to
Mono, in this case the reception will be monaural.
To turn the radio off, rotate POWER ON/OFF volume control counter clockwise.
Antennas
AM - This unit has a built-in ferrite bar antenna, which provides adequate reception in most areas. If reception
is weak, turn the unit to improve reception.
FM - This unit has a built-in antenna, which provides adequate reception in most areas. If reception is weak,
turn the unit to improve reception.
Auto Scan
Press and hold the Skip/TUNING or UP button for approximately 1 second and the unit will automatically
search for the next available station.
To Set and Receive a Station into Memory
1.
2.
3.
Tune a desired station as described in the previous
section. Press the PROG. button; the preset number
will blink.
Within ten seconds, select the desired preset using
the PRESET UP (14) or DOWN (15) button to set the
memory. Press the PROG (11) button to confirm.
To receive a preset station, simply press the PRESET
UP (14) or DOWN (15) button to select the desired
preset.
10 12 13
11
9
14 15
CD OPERATION
To Insert and Play a CD
This CD player is designed to play all kinds of Audio Discs and MP3 CD ROMS, such as CD recordables and
rewritables. Do not try to play CDI, CDV, DVD or computer CD's in this unit.
1. Press the PLAY/PAUSE/POWER ON button (15) to turn the unit on. Open the CD compartment lid by
pushing the CD Door OPEN. Gently press a disc, label side up, onto the spindle until it locks in place.
Close the CD compartment lid.
2. Push the FUNCTION button to select the CD position. Press the PLAY/PAUSE to begin playback; the
current track and elapsed playing time (CD information and folder will also appear, if using MP3) will
appear in the display.
3. Adjust the VOLUME control (1)..
4. When the disc has finished playing, it will stop automatically. Press the STOP button to stop the disc before
it is finished.
CD Playback Notes:
is
• See page 14 for more information on MP3's..
• When recording ("burning") CD's, make sure the session is "finalized" or simply record "burn" only one
session. You can find more information in your recorder's manual.
• This unit is capable of playing standard CD's or 3" singles;
no adapter is required.
12 13 15
• If a disc is inserted incorrectly, dirty, damaged or not
present at all, "No Disc" will appear in the display.
• Playback will stop when you open the CD compartment,
but it is not recommended to open the compartment
before the STOP button is pressed.
• When recording ("burning") CD's, make sure the session
"finalized" or simply record "burn" only one
session. You can find more information in your recorder's
manual.
• It may take 10 to 30 seconds for the player to read an
MP3 CD and begin playback, depending on the number
of tracks burned on the CD.
• If a disc is inserted incorrectly, dirty, damaged or not
present at all, "No Disc" will appear in the display.
10
CD OPERATION
To Pause a CD
1. During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE button. Playback
stops but the disc continues to spin and the elapsed time will blink in the display.
2. Press the PLAY/PAUSE button again to release pause and resume playback. The sound returns and the
elapsed time in the display stops flashing.
12 13 15
To Begin Playback from a Specific Track
1. After you insert the disc into the CD player and total number of tracks appear on the display, you may
press either the Skip/TUNING DN (12) or UP (13) button to select a specific track for playback.
2. When the desired track number (and file number if using MP3) appears in the display, press the
PLAY/PAUSE button. Playback will begin with the track (or file) you selected.
Forward/Reverse Skip Track
1. During playback, press and release the Skip/TUNING UP button once to advance the player to the
beginning of the next track. Press the Skip/TUNING UP button repeatedly to advance the player to higher
number tracks.
2. During playback, press and release the Skip/TUNING UP button once to move the player back to the
beginning of the currently playing track. Press the Skip/TUNING DN button repeatedly to move the player
back to lower numbered tracks.
11
CD OPERATION
High-Speed Music Search
During playback, press and hold either the Skip/TUNING DN (12) or UP (13) button to move the player
forward or backward within a track to locate a specific musical passage. The player will move forward or
backward at high speed as long as the buttons are depressed. When you release the Skip/TUNING DN (12)
or UP (13) button, normal playback will resume.
12 13
Repeat Playback of One Track
1. To repeat a single track, while in the Stop mode, press the MODE button once will appear in the display.
Press the Skip/TUNING DN (12) or UP (13) button to select the specific track that you wish to repeat.
2. When the desired track number appears in the display, press the PLAY/PAUSE button to begin playback.
The specific track you selected will be repeated continuously. To cancel Repeat playback, press the MODE
button repeatedly until the mode indictor disappears.
Repeat Playback of All Tracks
1. To repeat all the tracks on the CD, press the MODE button twice; "ALL" will appear in the display.
2. Press the PLAY/PAUSE button to begin playback. All tracks on the disc will be repeated continuously. To
cancel Repeat playback, press the MODE button repeatedly until the mode indicator disappears.
12
CD OPERATION
Repeat Playback of a Folder (MP3 with folders only)
1. To repeat all files in a directory (MP3 CD only), press the MODE button three times; "ALBUM" will appear
in the display. Press the Skip/TUNING DN or UP button to select the specific directory that you wish to
repeat.
2. Press the PLAY/PAUSE button to begin playback. All files in the selected directory will be repeated
continuously. To cancel Repeat playback, press the MODE button repeatedly until the mode indicator
disappears. See page 14 for more info on MP3 format.
Intro Playback (Will play the first 10 seconds of each track)
1. While in the Stop mode, press the MODE button 3 times (4 times if an MP3 CD with multiple directories is
inserted); "INTRO" will appear in the display.
2. Press the PLAY/PAUSE ON button to begin Intro playback. The first 10 seconds of all tracks on the disc
will be played in sequence. To cancel Intro playback, press the MODE button repeatedly until the mode
indicator disappears.
To Randomly Play Back a CD
1. While in the Stop mode, press the MODE button 4 times (5 times if an MP3 CD with multiple directories is
inserted); "RANDOM" will appear in the display.
2. Press the PLAY/PAUSE button to begin playback. The unit will play all the tracks in random order. When all
the tracks have been played, the unit will stop. To cancel Random playback, press the MODE button
repeatedly until the mode indicator disappears.
To Program the Memory (Up to 24 Tracks)
Programming is the ability to pre-select the order in which a series of tracks will be played.
1. While in the Stop mode, press the PROG. button. The track number will blink and "P-01" will appear in the
display.
2. Select a track to be programmed using the Skip/TUNING DN or UP button. If using a MP3 disc, see note
below.
3. Press the PROG. button to memorize the track. Repeat steps 2 and 3 to program additional tracks up to a
maximum of 24 tracks.
4. Press the PLAY/PAUSE button to begin program playback.
NOTES:
• While in the Stop mode and "P" is in the display, press the "STOP" button to clear the memory.
• MP3: If an MP3 CD is inserted, you will first select the directory number in step 1, press the PROG.
button and then enter the file/track number.
13
CD OPERATION
NOTES ON PROGRAM PLAYBACK:
• You can review the program by pressing the PROG. button repeatedly while in the Stop mode.
• To add track to the program memory, simply press the PROG. Button repeatedly until the track
(directory if using an MP3) appears as "00" in the display, then continue as per the steps 2 and 3 on
the previous page.
• Press the STOP button to stop the program before it is finished (the program memory will be kept).
• Each file may be stored in the program memory as many times as desired (up to 24 files).
• You can scroll through the program while it is playing using the Skip/TUNING DN or UP button.
MP3 FAQ’s - Frequently Asked Questions
Please read before playing an MP3 CD.
• Does the unit support packet write CD - RW?
Yes, it can. You can add or delete MP3 files without reformatting. It appears like a PC hard drive.
• Can the unit read regular music CD's?
Yes, it can. However you can not mix MP3s and WAV files on the same CD. If you do this your
Portable MP3 CD Player will play only the MP3 Files.
• Does the unit have Electronic Skip Protection built-in?
Yes, it has an anti-shock buffer. What it means for the everyday user is that it can withstand road
bumps, shaking, etc. There will be no skipping when you jog or run on a treadmill or drive on a bumpy
road.
• Can I use the MP3 Extension for non-audio data files?
No, this may result in serious malfunction and harmful noise interference.
• Can I mix MP3 files with other file types on the CDR?
Yes, but your Player will ignore those files and read only the MP3 files on the CDR.
• Does the unit support multi-session CDR’s?
If the MP3 CD is not finalized, you can burn a new group of MP3 files until the CD is full.
• Does the unit support subdirectories (sub-folders)?
Yes, the unit can read MP3 files from sub-folders.
14
CD OPERATION
Single Session
The following chart is an example of a Windows Explorer display that will appear on your computer monitor for
a single session MP3 CD ROM with directories/albums. Check the added notes to help you understand the
MP3 CD unit display and the playback sequence of directories/albums and tracks on a single session MP3
CD.
Multi Session
The computer user does not need to finalize the CDR disc as music is burned on the CD. Because of this, the
music can be downloaded at different times until the whole CD is full.
NOTES:
•
•
•
•
The arrow pathway shows the sequence of MP3 directory and file playback.
This example has a total of seven MP3 directories.
Based on this layout, the first file will be "Blur01.mp3" and the last file will be "Twain15.mp3".
"Skipped" denotes a directory which contains non-audio files only, e.g. jpg, wav, etc. These cannot be
detected played on this player. When an album contains mixed format files, the non-MP3 files will be
skipped.
15
SPECIFICATIONS
AUDIO SECTION
Nominal Output Power per Channel
5.0 Watts Rms
Total Harmonic Distortion (THD)
0.3% at 1 Watt
Frequency Response
30Hz to 20kHz
Signal-to-Noise Ratio
>65dB Maximum
Speaker Impedance
8 Ohms Nominal
Headphone Output Impedance
32 Ohms
Headphone Output Level
500 mV (Maximum)
Headphone Connector Type
3.5 mm Stereo Jack
Auxiliary Input Impedance
6K-Ohms Nominal
Auxiliary Input Level
2.0 Volts (Maximum)
Auxiliary Connector Type
3.5 mm Stereo
CD SECTION
MPEG Rate
32-38Kbps
Sampling Frequency
8/11.025/12KHz for MPEG2.5
15/22.05/24KHz for MPEG2
32/44.1/48 KHz for MPEG1
TUNER SECTION
MP3 Playback
ISO9660 format compatible
Frequency Range (FM)
87.5 - 108MHz
Frequency Range (AM)
530 - 1720 kH
Check the CD burner/recorder's documentation to see if it complies with these specifications.
16
PROBLEM SOLVING
For your assistance, we have listed a few common problems below.
SYMPTOM
CAUSE
SOLUTION
Receiver is set to off
Turn Receiver power on
using the Receivers
Batteries not installed or
intalled incorrectly
Power Button
Install batteries observing
correct polarity
System does not turn on
Boombox does not operate
using batteries
As long as the AC power
Remove powe connector
connector is attached to the from rear panel of
rear panel of the Boombox Boombox
battery operation is disabled
Intermittent operation
Low battery level
Replace batteries
Satellite antenna not
connected
Connect satellite antenna to
rear panel of Boombox
Receiver not firmly seated
in cradel
Press the Receiver lower
left sand right sides to
ensure that the connectors
are firmly mated
Antenna not Detected
Message
Acquiring Siginal Message
No sound from Boombox
speakers
Change location to eliminate
Check for obstacles over or nearby obstacles
around antenna
(bridges, etc.)
Headphones installed
Remove headphones
SAT/AUDIO selector switch Switch to the desired audio
position (SAT) or AUDIO
is in the incorrect position
17
16
PROBLEM SOLVING
SYMPTOM
CAUSE
SOLUTION
CD compartment not closed Close CD compartment
Disc inserted incorrectly
Reinset disc correctly
Dirty or defective disc
Try another disc
Moisture condensation
on disc
Wipe disc with soft cloth
Dirty or defective disc
Clean or replace disck
Headphone plug not
inserted correctly
Reinsert heaphone plug
correctly
Disc will not play
Erratic CD playback
No sound from headphones VOLUME control set to
minimum
Noise or sound distorted
on radio
Increase volume
Weak batteries
Replace batteries
Defective disc
Try another disc
Station not tuned properly
for AM or FM
Retune AM or FM broadcast
station
AM: Unit is not positioned
correctly
Rotate unit until best
reception is obtained
Poor FM siginal
FM STEREO indicator does
not light
MODE button not set to
Stereo
18
Retune station
Press MODE button to turn
to Stereo
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc only by its
edges. Never allow your fingers to come in contact with the shiny,
unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact disc label.
• Clean the compact disc periodically with a soft, lint-free, dry cloth. Never
use detergents or abrasive cleaners to clean the compact disc. If
necessary, use a CD cleaning kit.
• If a compact disc skips or gets stuck on a section of the compact disc,it
is probably dirty or damaged (scratched).
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer
edge of the compact disc. Never wipe in circular motions.
• Compact discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc.
Prolonged exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink
may damage the surface.
Cleaning the unit
• To prevent fire of shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a dry cloth may be used on the front panel.
19
18
CARE AND MAINTENANCE
Periodic Inspection
The Sound System Deluxe Portable Boom Box should be inspected periodically for external damage. At least
once every 30 days of use, perform the following checks:
• Inspect the Receiver connector for loose, bent or broken pins, misalignment, etc.; make sure the SAT
connector is intact and exhibits no apparent damage..
• Check the VOL control for freedom of motion without binding of any kind.
• Check that the SAT/Audio Selector operates correctly and that it toggles between the Satellite Radio
output and the Audio output.
• Make sure the antenna connector at the rear of the unit is free from damage of any kind and that the
antenna lead plug mates correctly and securely.
• Make sure the DC 12V connector at the rear of the unit is also free from damage of any kind and that
the AC Adapter plug mates correctly and securely.
• Check the antenna for any physical damage; make sure the antenna lead is secure and not nicked or
frayed.
• Inspect the overall Boom Box case and speaker grills for damage such as nicks, scratches
punctures, etc.
Cleaning the Sound System Deluxe Portable Boom Box
When cleaning the Boom Box, make sure the AC Adapter is unplugged from the power source. Do not use liquid
cleaners or aerosol cleaners. Use a lint-free cloth lightly dampened with water for cleaning the exterior of Boom
Box only.
19
20
WARRANTY
Warranty Information
XACT Communication
One-Year Limited Warranty
This limited warranty sets forth all XACT Communication responsibilities regarding your product. There are no
other expressed or implied warranties from XACT Communication.
Warranty Service Provided
If you purchased the product new from a retail vendor, XACT Communication warrants the equipment against
defects in material and workmanship for a period of one (1) year from the original date of purchase. This
warranty is in lieu of all other express warranties. This warranty begins when you purchase the product and
continues for one (1) year unless you sell or rent the unit, in which case the warranty stops.
XACT Communication disclaims any implied warranty, including the warranty of merchantability and the
warranty of fitness for a particular purpose, as of the date of one year from your original purchase of the product
XACT Communication assumes no responsibility for any special, incidental, or consequential damages.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Some states do not allow the exclusion or limitations of special, incidental, or consequential damages or
limitations on how long a warranty lasts, so the above exclusion or limitation may not apply to you.
21
20
WARRANTY
Warranty Service Not Provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or
operation, lack of reasonable care, unauthorized modification, or the affixing of any attachment not provided
by XACT Communication with the equipment, and/or loss of parts. This warranty is voided in the event any
unauthorized person opens, alters, or repairs the product.
All XACT Communication equipment being returned for repair must be suitably packaged.
What To Do for Warranty Service
During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from
whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized
service center. Please allow a minimum of 2-3 weeks for the return of your product. For the shipping
address of the authorized service center, call one of the telephone numbers given below.
Your product will be repaired or replaced if examination by the service center determines the product is defective.
Products received damaged as a result of shipping will require you to file a claim with the carrier prior to
repair. A product received with missing parts or with damage due to abuse, inadequate packing or some other
noncompliance with this limited warranty will be returned to you C.O.D., freight collect.
NOTE: A product received which was not made by XACT Communication or which is not defective as
determined by our test procedures will not be repaired and will be returned to you C.O.D., freight collect.
21
22
WARRANTY
To Obtain Warranty Service
• Provide proof of the date of purchase within the package.
• Prepay all shipping costs to the authorized service center.
• Include a return shipping address within the package.
Please retain your sales receipt, the carton, the packing materials, and the printed material. The original
carton is the best shipping container for the Product should you have to return it.
For your reference:
Model Number______________________________
ESN Number______________________________
S/N Number_______________________________
Date of Purchase__________________________
Name of Dealer_____________________________
XACT Communication Customer Service Telephone Number:
1-866-466-XACT (9228)
OUTSIDE THE U.S.A. AND CANADA CALL: 1-212-481-7950
Visit Us on the Web: www.getxact.com
23
NOTES
24
23
To activate your Satellite Radio Receiver or for latest news and
questions regarding SIRIUS® Satellite Radio service visit sirius.com
or call 1-888-539-SIRIUS (7474).
Call Toll Free 1-866-466-XACT (9228)
or Visit our Website:
www.getxact.com
Download PDF

advertising