Operating instructions | AEG 86810 Washer User Manual

LAVAMAT 86810
Washing Machine
User information
Dear Customer,
Please read this user information carefully and keep it to refer to later.
Please pass the user information on to any future owner of the appliance.
1
3
2
2
The following symbols are used in the text:
Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage to the appliance.
Useful tips and hints
Environmental information
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What is shown in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
7
7
Program overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Prior to using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on the appliance for the first time - setting the language. . . . .
Setting the time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carrying out a wash programme prior to first use. . . . . . . . . . . . . . . . . . . . .
10
10
11
11
Preparing and sorting washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Running a wash cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening the door/Loading the washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding detergent/conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on the appliance/selecting a programme . . . . . . . . . . . . . . . . . . .
Changing the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing spin speed/selecting rinse hold . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prewash, Sensitive, Stain, Night Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Saving: SHORT or VERY SHORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delay Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Programme progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interrupting a programme/Adding washing . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing cycle complete/Removing the washing. . . . . . . . . . . . . . . . . . . . . .
12
12
12
13
14
14
15
16
17
17
18
19
19
19
20
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory 1, 2, 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extra Rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contrast and brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
21
22
22
23
23
24
Child safety device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3
What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remedying small malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the wash result is not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carrying out an emergency drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drain pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
27
29
30
31
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Consumption values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation and connection instructions. . . . . . . . . . . . . . . . .
34
Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 34
Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Where to install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making the appliance level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
34
35
37
38
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Connecting to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Guarantee/Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service and Spare Parts
4
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Operating Instructions
1 Safety
Prior to using the appliance for the first time
• Follow the “Installation and connection instructions”.
• If the appliance is delivered in the winter months when there are minus temperatures: store the washing machine at room temperature
for 24 hours before using for the first time.
Correct use
• The washing machine is only designed for the washing of normal domestic laundry at home.
• Additions or modifications to the washing machine are not permitted.
• Only use detergents/conditioners that are suitable for use in domestic
washing machines.
• The washing must not contain any flammable solvent. The risk of explosion exists.
• Do not use the washing machine for dry cleaning.
• Dyes/colour removers may only be used in the washing machine, if
the manufacturer of these products expressly permits this. We cannot
accept liability for any damage arising.
Child safety
• Keep packaging away from children. There is a risk of suffocation.
• Children often do not recognise the hazards associated with electrical
appliances. Don’t allow children to use the washing machine unsupervised.
• Make sure that children and pets don’t climb into the drum of the
washing machine. The risk of death exists.
General safety
• Repairs to the washing machine may only be carried out by qualified/
authorised service engineers.
• Never use the appliance when the electrical cable is damaged or the
control panel, worktop or plinth area are damaged to such an extent
that the inside of the appliance is openly accessible.
5
1
6
• Switch off the washing machine prior to cleaning it and carrying out
maintenance. In addition, remove the power plug from the power
point or – if the appliance has been hard-wired – switch off the cutout in the fuse box or completely remove the fuse.
• If operation is stopped, disconnect the appliance from the mains supply and turn off the tap.
• Never remove the power plug from the power point by pulling on the
cable. Always pull the plug.
• Multiway-plugs, connectors and extension cables must not be used.
Resulting overheating may constitute a fire hazard.
• Never wash the washing machine down with a water jet. Danger of
electric shock.
• When using wash programmes with high temperatures the glass in
the door will become hot. Do not touch it!
• Before emergency emptying of the appliance, before cleaning the
drain pump or opening the door in an emergency, let the water cool
down.
• Small animals can nibble on electrical cables and water hoses. This
can constitute a risk of electrocution and water damage. Keep small
animals away from the washing machine.
Warning: When your appliance has finished its working life, remove
the plug from the mains socket. Cut off the cable and plug and dispose
of them.
Destroy the door lock. This prevents children from trapping themselves
inside and endangering their lives.
Description of the appliance
Detergent dispenser
drawer
Control panel
Rating plate
(behind door)
Three screw feet
(height adjustable);
rear left:
Automatic foot
Plinth flap/
Drain pump
Control panel
Programme knob and
On/Off switch
Display
Function keys
START/PAUSE key
What is shown in the display
Information field, shows the current settings
COTTON
Cycle end at
Temperature
12.45
Current time
15.05
End of cycle
95C1000 NýýýýýVýSýFýLýBýaýaýKýT
Spin speed/
Rinse hold
Options
Times
7
Program overview
1600/1400
1200/1000/
800/600/400
0
•
•
•
•
•
•
•
•
•
COTTON
7kg
•
•
•
• •3) •3)
•
•
•
•
•
7kg
or
3,5kg
•
•
•4) • •3) •3)
•
•
•
•
•
7kg
•
•
•
•
•
•
•
3,5kg
•
•
•
•
•
LINEN/EASY-CARES
60°, 50°, 40°, 30°, Cold cycle
40 - 60 MIX
DELICATE
40°, 30°, Cold cycle
•
•
•4) •
•
DELAY START
NIGHT CYCLE
7kg
VERY SHORT
STAIN
ENERGY SAVING 2)
Program
SHORT
SENSITIVE
RINSE HOLD
Spin speed
PREWASH
Times
max. load1)
(dry washing)
Options
WOOL/ (HANDWASH)
40°, 30°, Cold cycle
2kg
•
•
•
•
SILK/
1kg
•
•
•
•
(HANDWASH)
SPIN
7kg
•
•
RINSE
3,5kg
•
•
•
•
3,5kg
•
•
•
•
•
•
•
•
DRAIN
REFRESH
EASY IRON
60°, 50°, 40°, 30°, Cold cycle
1kg
•
•4) •
•
•
1) A 10 litre bucket holds around 2.5 kg of dry washing (cotton)
2) Program settings for testing in accordance with or in support of EN 60 456 and IEC 60 456 are
described in the Chapter “Consumption Values”.
3) Recommended load for short progammes is 3,5kg; full loading is possible however with somewhat reduced
cleaning results.
4) STAIN can only be selected with wash temperatures of 40°C and above, as stain treatment products are
only effective at higher temperatures.
8
Care
symbols1)
Use/Features
Energy-saving program at 60 °C for lightly to normally soiled whites/coloureds made
of cotton/linen.
MO
Energy-saving program at 95 °C for normally to heavily soiled whites/coloureds
made of cotton/linen.
O
General program for whites/coloureds made of cotton/linen as well as for easy-care
mixed fibres and synthetics. The program is automatically adjusted to the different
fabric types and load sizes. If loading only with easy-care washing, do not load more
than 3,5kg.
JM
IKN
Program for whites/coloureds which are labelled for different wash temperatures.
Items, which according to the care symbols are normally to be washed separately at
40 °C or at 60 °C, can be washed together in this program. Achieves the washing results of a normal 60° programme.
JM
Gentle program for delicate fabrics such as bonded fabrics, microfibres, synthetics,
net curtains (max. net curtain load 20 to 25m2). If used with
RINSE HOLD also
suitable for items with a climatic membrane, e.g. outdoor clothing.
IK
Particularly delicate program for machine washable and hand washable wool or wool
mixtures.
QLH
Particularly delicate program at 30 °C, for machine washable and hand washable silk.
Wash very delicate items individually.
QLH
Draining and spinning, e.g. after a
RINSE HOLD/
for hand-washed cottons/linens and easy-cares.
NIGHT CYCLE, or separate spin
Separate gentle rinse (3 rinses, liquid conditioner is washed in from compartment
gentle spin).
Pumps water away after a
,
JMO
IKN
JMO
RINSE HOLD.
Special cycle at 30 °C, about 20 minutes long, for quickly washing through e. g. once
worn, slightly dirty sports clothing or new clothes.
Special cycle for easy-care fabrics, which afterwards are to be ironed only lightly or
not at all.
JMO
IKN
KN
1) The numbers in the care symbols show the maximum temperatures.
9
Prior to using for the first time
Switching on the appliance for the first time - setting
the language
3
The display is set to English as standard in the factory.
Important: If the display does not show the menu for setting the language when the appliance is switched on, the appliance has been
switched on before. If this happens, please see the section “Setup/Language”.
To switch on the appliance, turn the program knob to any program,
e. g. COTTON.
The display lights up and
should look like the illustra- Language:
ENGLISH
tion opposite.
aýýýýýaýaýaýaýBýaýaýaýa
In addition the display
shows:
TEMP.
RPM
OPTIONS
OK
TIME
– “To confirm push OK key”
– “To change push OPTION
key”
If you want to keep the language:
Press the OK key.
If you want to change the
Sprache
language:
DEUTSCH
1. Press the OPTIONS key reaýýýýýaýaýaýaýBýaýaýaýa
peatedly, until the desired
language appears in the disTEMP.
RPM
OPTIONS
OK
TIME
play, e. g. DEUTSCH.
2. Press the OK key.
In the display DEUTSCH
flashes several times and the
display should then look like
e.g. the illustration opposite.
3. To switch the appliance off,
turn the programme knob
to OFF.
10
12.45
KOCHWÄSCHE
Programmende um
15.05
95C1600 aýýýýýaýaýaýaýaýaýaýaýa
TEMP.
RPM
OPTIONS
OK
TIME
Setting the time
So that the time and the end of the program are correctly displayed,
please check the display and set the current time if necessary. To do
this, please see the section “Setup/Clock”.
Carrying out a wash programme prior to first use
In order to remove any residues from the drum and water container
which may have been left during manufacturing, perform the first
wash cycle without any washing in the machine. Programme: LINEN/
EASY CARES 60 °C, option Time saving: VERY SHORT, use approx. 1/4
measuring cup of detergent.
Preparing and sorting washing
Preparing washing
• Empty the pockets. Remove foreign bodies (e.g. coins, paper clips,
nails, etc.).
• Do up zips, button up covers to prevent damage to washing.
• Remove the runners from net curtains or cover them with a net or a
bag.
• Wash delicate and small items in a net/pillowcase, e. g. net curtains,
tights, small socks, handkerchiefs, bras.
Important: Bras and other items containing wires should only be
washed in a net bag. The wires can work loose and damage the appliance.
Sorting washing
• By colour: Wash white and coloured washing separately. Washing can
run.
• By temperature, type of washing and care symbol.
Important: Do not wash fabrics with the G care symbol (= do not
wash!) in the washing machine.
11
Running a wash cycle
Opening the door/Loading the washing
1. To open the door: pull the handle on the door.
2. Unfold washing and load it loosely
into the machine. Mix large and
small items.
Attention! Do not get any washing
caught between the door and the
rubber seal.
3. Push the door firmly shut. Door
catch must audibly click shut.
Adding detergent/conditioner
Important: Only use detergents/conditioners that are suitable for use
in household washing machines.
Add detergent/conditioner in accordance with the detergent/conditioner manufacturer’s instructions. Observe instructions on the packaging.
The amount of detergent used depends on:
– the degree of soiling,
– the load size
– the hardness of the tap water.
• If the manufacturer does not make any recommendations with regard to small volumes of washing: For a half-load use a third less, and
for a very small load use only the half the amount of detergent that
is recommended for a full load.
• Water softener should be used from water hardness range 2 (=medium). The amount of detergent used can then always be that as for
hardness range 1 (=soft). Your local water company will provide you
with information about water hardness in your area.
1. Pull out the detergent drawer as far as it will go.
2. Add the detergent/conditioner.
3. Push the detergent drawer in fully.
12
Washing powder/tablets
for the main wash cycle
Conditioner/Wash-care
products to preserve the
shape of garments/Starch
Stain removal agent/
stain removal tablets
Washing powder/tablets
for the pre wash cycle
or water softener
Washing powder/tablets for the main wash cycle
If you are using water softener and require the right compartment for
detergent for the pre-wash cycle, add the water softener on top of the
detergent for the main wash cycle in the left compartment.
Softener, wash-care products to preserve the shape of garments,
starch
Fill the compartment to no more than the MAX indicator. Add water to
thick liquid concentrates in accordance with the manufacturer’s instructions before using them. Dissolve powder starch.
If you are using liquid detergent:
Add liquid detergent using measuring containers provided by the detergent manufacturer.
Switching on the appliance/selecting a programme
3
Select the programme using
the programme knob, e. g.,
LINEN/EASY CARES.
When you select a programme, you switch the appliance on at the same time.
– The display lights up and
shows the programme set,
the current time and the
estimated end of the cycle.
– Depending on the programme, the washing machine suggests a temperature and a spin speed. You can change these suggestions.
– The lighting for the display switches itself off at the end of the cycle
or, if the appliance is not started after the programme is set, after 10
minutes. To switch the light on again, press any key or turn the programme knob.
13
Changing the temperature
Press the TEMP. key repeatedly until the desired temperature is
displayed.
12.45
LINEN/EASY CARE
Cycle end at
14.37
50C1600 aýýýýýaýaýaýaýaýaýaýaýa
TEMP.
RPM
OPTIONS
OK
TIME
Changing spin speed/selecting rinse hold
3
14
Press the RPM key repeatedly, until the desired spin
speed or
RINSE HOLD is
displayed.
LINEN/EASY CARE
Cycle end at
12.45
14.37
50C 800 aýýýýýaýaýaýaýaýaýaýaýa
• With spin speed “0” the
TEMP.
OPTIONS
OK
TIME
RPM
last rinse water is drained off
at the end of the cycle, but
the washing is not spun.
• With
RINSE HOLD the washing is left to soak in the last rinse water. There is no final spin after the intermediate spin(s). Intermediate
spins are programme-dependent and cannot be altered.
Setting options
Options can be added to a wash cycle that has already been selected.
Press the OPTIONS key. The display shows the symbols for the options.
PREWASH
Pre-washes at about 30 °C before the main wash cycle, which
follows automatically.
SENSITIVE
Enhanced rinse action through an additional rinse cycle together with decreased drum movement (improved fabric care). Ideal
when frequent washes are necessary, e. g. in cases of over-sensitive skin. An additional rinse cycle can also be permanently set
(see section “Setup”).
STAIN
For heavily soiled or stained washing. In-wash stain treatment
products are washed in at the optimum time as the programme
progresses.
NIGHT CYCLE
The washing is left to soak in the final rinse water. There is no final spin and no intermediate spin. Because of this the programme runs very quietly. NIGHT CYCLE is therefore particularly
suitable if you want to wash at night.
Setup
3
The special functions that can be set under Setup remain permanently stored in the appliance, e. g., time, language, etc. (see
section “Setup”), until they are changed or deactivated.
Only the options that can be combined with the cycle that has already
been set are shown in the display.
15
Prewash, Sensitive, Stain, Night Cycle
1. Press the OPTIONS key repeatedly until the desired
symbol flashes, e. g.,
PREWASH. (With each press
of the key, the next symbol
flashes – moving from left to
right.)
3
16
12.45
LINEN/EASY CARE
Prewashing
14.37
aýýýýýVýSýFýLýBýaýaýaýa
TEMP.
RPM
OPTIONS
OK
TIME
2. Press the OK key. The symbol
12.45
LINEN/EASY CARE
stops flashing. A black bar
14.56
Sensitive
appears under the symbol.
aýýýýýV_ýSýFýLýBýaýaýaýa
The option is set. The display
changes to the next option.
TEMP.
RPM
OPTIONS
OK
TIME
To switch off the option,
press the OPTIONS key repeatedly until the symbol for
the option flashes and then press the OK key. The black bar under the
symbol disappears.
If other options are to be selected: press the OPTIONS key repeatedly
until the desired symbol flashes and confirm each one with the OK key.
3. Press the OPTIONS key re12.45
LINEN/EASY CARE
peatedly, until the exit icon
14.56
Cycle end at
appears. The display shows
50C 800 aýýýýýVýaýaýaýaýaýaýaýa
the symbol for the selected
option.
TEMP.
RPM
OPTIONS
OK
TIME
Setting times
Shortened cycles and the delay of the start time can be set for a wash
cycle that has already been selected.
Press the TIME key. The display shows the symbols for Time Saving and
Delay Start.
Time Saving: SHORT or VERY SHORT
Shortened wash cycle for lightly soiled washing.
– SHORT: only possible with the programmes COTTONS, LINEN/
EASY CARES and EASY IRON
– VERY SHORT: only possible with the programmes COTTONS, LINEN/EASY CARES, EASY IRON and DELICATES.
Delay Start
To delay the start of a programme by between 30 minutes and a
max. of 20 hours.
Time Saving: SHORT or VERY SHORT
3
1. Press the TIME key repeatedly, until the SHORT symbol
flashes.
2. Press the OK key.
3. Press the TIME key. A black
bar appears under the
symbol, SHORT or VERY
SHORT appears in the display.
Time saving
NORMAL
4. To change from SHORT to
VERY SHORT, press the TIME
key again.
Time saving
VERY SHORT
12.45
14.37
aýýýýýaýaýaýaýaýaýaýKýT
TEMP.
RPM
OPTIONS
OK
TIME
12.45
14.12
aýýýýýaýaýaýaýaýaýaýK_ýT
You can change between
TEMP.
RPM
OPTIONS
OK
TIME
NORMAL, SHORT, and VERY
SHORT using the TIME key.
5. Press the OK key to confirm
the selection. The display changes to the symbol for Delay Start, i.e. Delay Start can now be set.
6. Press the TIME key, if no Delay Start is to be set. The display shows the
SHORT symbol
as well as the time for the end of the cycle.
17
Delay Start
3
18
1. Press the TIME key repeatedly, until the DELAY START symbol
flashes.
2. Press the OK key. “Start in 0 min” is shown in the display.
3. Press the TIME key repeated12.45
Delay Start
ly, until the display shows
18.37
Start in 4h
the desired period by which
you want to delay the start,
aýýýýýaýaýaýaýaýaýaýKýT_
e. g. “Start in 4 h” (=4
TEMP.
RPM
OPTIONS
OK
TIME
hours). A black bar appears
under the symbol.
If 20 h is displayed and you
press the key again, the delayed start is cancelled.
4. Press the OK key. The display shows the DELAY START symbol
and the
time until the end of the programme (including period by which the
start has been delayed).
5. To activate the Delay Start,
12.45
LINEN/EASY CARE
press the START/PAUSE key.
4.00
Start in
The display now shows e. g.,
“Start in 4.00” (==4 hours).
50C 800 aýýýýýaýaýaýaýaýaýaýaýT
The display for the time reTEMP.
RPM
OPTIONS
OK
TIME
maining until the start of the
programme is reduced in 30
minute intervals (e. g., 4.00,
3.30, 3.00, ... 0.30, 0).
Starting a programme
3
1. Check that the water tap is open.
2. Press the START/PAUSE key.
The programme is started or it starts after the time delay set has
elapsed.
If after pressing the START/PAUSE key the display shows “Door not
Closed”, the door has not been shut properly. Push the door firmly
closed and press the START/PAUSE key again.
Programme progress
3
The display indicates the
stage of the programme that
is currently being performed
as well as the time to the
end of the programme.
12.45
LINEN/EASY CARE
Washing
14.37
50C 800 aýýýýýaýaýaýaýaýaýaýaýa
TEMP.
RPM
OPTIONS
OK
TIME
During the wash cycle the
time to the end of the programme may change as the
programme adjusts itself to different conditions (e. g., type and quantity of laundry, out of balance spin detection, special rinses, etc.).
Interrupting a programme/Adding washing
Interrupting a programme
• The programme can be interrupted at any time by pressing
the START/PAUSE key. It is then re-started by pressing the key again.
• To stop the washing machine before the programme has ended, turn
the programme knob to OFF.
Attention! Be careful if there is water in the appliance!
Adding washing
1. Press the START/PAUSE key.
• If “Door locked” and “Pause” are alternately shown in the display, it is
no longer possible to add washing, e. g. when the water level is too
high.
• If “Door openable” and “Pause” are alternately shown in the display, it
is still possible to add washing:
2. Open the door.
3. Add washing and close the door again.
4. Press the START/PAUSE key again. The programme continues.
19
Washing cycle complete/Removing the washing
At the end of the cycle a long acoustic signal sounds 3 times (when the
SOUND setting is NORMAL or LOW) and the messages “Cycle ended”
and “Door openable” appear alternately in the display.
1. Open the door and remove the washing.
2. Turn the programme knob to OFF.
3. Turn off the tap.
4. After the wash, pull out the detergent dispenser drawer slightly to allow it to dry. Leave the door slightly open to air the inside of the washing machine.
If RINSE HOLD
or NIGHT CYCLE
was selected:
After a Rinse Hold or when a programme with NIGHT CYCLE has ended,
the START/PAUSE indicator flashes. “Cycle ended” and “Door locked”
appear alternately in the display.
The water must first be drained off:
– Turn the programme knob to OFF, then to DRAIN and press the
START/PAUSE key (the water is drained without spinning),
or
– or turn the programme knob to OFF and then to SPIN. Change the
spin speed if necessary and press the START/PAUSE key (the water is
drained and the washing spun).
Setup
The special functions that can be set under Setup remain permanently
stored independent of each washing cycle – even after the appliance
has been switched off or the mains plug has been removed from the
socket.
20
Memory 1, 2, 3
Programme combinations can be stored at programme knob positions
MEMORY 1, 2, 3 and can then be selected using the programme knob.
To do this the desired programme combination is first put together and
then stored.
Setting the Memory
Example: Programme posi12.45
LINEN/EASY CARE
tion MEMORY 1 is to be giv14.37
en the following programme Cycle end at
40C
800
aýýýýýVýaýaýaýaýaýaýaýa
combination: LINEN/EASY
CARES 40 °C, 800 rpm, with
TEMP.
RPM
OPTIONS
OK
TIME
PREWASH.
1. Turn the programme knob to
LINEN/EASY CARES.
2. Press the TEMP. key repeatedly, until 40 °C appears in the display.
3. Press the RPM key repeatedly, until 800 appears in the display.
4. Using the OPTIONS key
set PREWASH and press the OK key. A black
bar appears under the PREWASH symbol
.
5. Press the OPTIONS key repeatedly, until the SETUP symbol flashes.
3
3
6. Press the OK key. The display
changes to the Special Functions level. Programme
memory position MEMORY 1
is offered first.
Memory 1
Store program
aýýýýýaýaýaýaýBýaýaýaýa
TEMP.
RPM
OPTIONS
OK
TIME
To change to another memory position, press the OPTIONS key.
7. Press the OK key.
The programme combination is now stored to programme knob position MEMORY 1 and in the future can be selected directly using the
programme knob.
The Memory can be overwritten at any time with a new programme
combination (see “Changing the Memory”), but cannot be deleted.
Changing the Memory
1. Put together the new programme combination as required (for an example, see “Setting the Memory”, steps 1 to 4).
2. Press the OPTIONS key repeatedly, until the SETUP symbol flashes.
3. Press the OK key.
21
4. Using the OPTIONS key select the memory position to be changed, e. g.
MEMORY 1.
5. Store the new programme combination using the OK key.
SOUND
The volume of the acoustic signal can be selected.
1. Turn the programme knob to any programme and press the OPTIONS
key repeatedly until the SETUP symbol flashes.
2. Press the OK key.
3. Press the OPTIONS key repeatedly, until the display shows SOUND.
4. Press the OK key.
5. Press the OPTIONS key reSound
peatedly until the desired
NORMAL
volume (NORMAL, LOW, NO
aýýýýýaýaýaýaýBýaýaýaýa
SOUND) is shown in the display.
TEMP.
RPM
OPTIONS
OK
TIME
6. Press the OK key to confirm
the setting. The icon changes
to the next special function.
7. Press the OPTIONS key repeatedly until the exit icon is displayed.
Extra Rinse
1. Turn the programme knob to any programme and press the OPTIONS
key repeatedly until the SETUP symbol flashes.
2. Press the OK key.
3. Press the OPTIONS key reRinse+
peatedly until EXTRA RINSE
NO
is shown in the display.
aýýýýýaýaýaýaýBýaýaýaýa
4. Press the OK key. The EXTRA
RINSE symbol
appears.
TEMP.
RPM
OPTIONS
OK
TIME
The icon changes to the next
special function.
5. Press the OPTIONS key repeatedly, until the exit icon appears.
22
Language
1. Turn the programme knob to any programme and press the OPTIONS
key repeatedly until the symbol SETUP flashes.
2. Press the OK key.
3. Press the OPTIONS key reSprache
peatedly, until the display
DEUTSCH
shows LANGUAGE.
aýýýýýaýaýaýaýBýaýaýaýa
4. Press the OK key.
5. Press the OPTIONS key reTEMP.
OPTIONS
OK
TIME
RPM
peatedly, until the desired
language appears in the display, e. g. DEUTSCH.
6. Press the OK key. The icon changes to the next special function.
7. Press the OPTIONS key repeatedly, until the exit icon appears.
Clock
1. Turn the programme knob to any programme and press the OPTIONS
key repeatedly until the SETUP symbol flashes.
2. Press the OK key.
3. Press the OPTIONS key repeatedly until CLOCK is shown in the display.
4. Press the OK key.
5. Using the OPTIONS key set
11.17
Clock
the desired time. With each
Set time
press of the key, the display
moves on by one minute. If
aýýýýýaýaýaýaýBýaýaýaýa
the key is kept pressed, the
TEMP.
RPM
OPTIONS
OK
TIME
display changes in 10 minute
steps.
6. Press the OK key. The icon
changes to the next special function.
7. Press the OPTIONS key repeatedly, until the exit icon appears.
23
Contrast and brightness
1. Turn the programme knob to any programme and press the OPTIONS
key repeatedly until the SETUP symbol flashes.
2. Press the OK key.
3. Press the OPTIONS key repeatedly, until the display shows CONTRAST or
or BRIGHTNESS.
4. Press the OK key.
Contrast
5. Using the OPTIONS key set
ƒ………………™………………‡
the desired setting. With
aýýýýýaýaýaýaýBýaýaýaýa
each press of the key or if
the key is kept pressed down,
TEMP.
RPM
OPTIONS
OK
TIME
the black triangle in the diagram moves further to the
right for more contrast or
brightness. If the triangle reaches the right hand edge, it starts again
from the left.
6. Press the OK key. The display changes to the next special function or
back to the exit icon.
7. Press the OPTIONS key repeatedly, until the exit icon appears.
Child safety device
If the child safety device has been activated, the door can no longer be
shut.
Activating the child safety device:
Use a coin to turn the knob (on the
inside of the door) in a clockwise direction as far as it will go.
24
1
Warning! The knob must not be depressed after being set, otherwise
the child safety device is not activated. The knob must stand out as
shown in the illustration.
Deactivating the child safety device:
Turn the knob in an anti-clockwise direction as far as it will go.
Cleaning and maintenance
Important! Do not use furniture care products or aggressive cleaners to
clean the appliance.
Wipe control panel and body with a damp cloth.
Cleaning procedure
If you plan to wash mainly at low temperature, you should run a hot
programme from time to time. This will reduce any deposits and clean
the appliance from the inside.
Detergent dispenser drawer
The detergent dispenser drawer should be cleaned regularly.
1. Remove the detergent dispenser drawer by pulling it firmly.
2. Remove the conditioner insert from
the middle compartment.
3. Clean all parts with water.
4. Put the conditioner insert in as far as
it will go, so that it is firmly in place.
25
5. Clean all parts of the washing machine, especially the nozzles in the
top of the washing-in chamber, with
a brush.
6. Insert the detergent dispenser drawer in the guide rails and push it in.
Washing drum
Rust deposits in the drum may occur due to rusting foreign bodies in
the washing or tap water containing iron.
Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum with a cleaning agent for stainless steel.
2. Run a washing cycle without any washing to clean off any cleaning
agent residues. Program: LINEN/EASY CARES 60°, option Time saving:
VERY SHORT, add approx. 1/4 of a measuring cup of washing powder.
Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the
folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.
26
What to do if...
Remedying small malfunctions
If while the appliance is operating a short acoustic signal sounds 3
times and one of the following messages appears in the display:
– “No incoming water/Check tap & Hose”,
– “No drain - check/drain hose/filter” or “Pump Blocked”,
– “Door not Closed”,
please have a look at the following table.
When the fault is remedied, press the START/PAUSE key.
If “Warning : E and number or letter” is displayed: Switch the appliance
off and on again. Re-set the programme. Press the START/PAUSE key.
If the warning is displayed again, please contact the Service Force
Centre and inform them of the warning.
Problem
Possible cause
Mains plug not plugged
in or fuse not working.
Remedy
Plug in mains plug. Check
fuse.
Close door - there should be
Washing machine does not Door not closed properly.
an audible click.
work.
START/PAUSE key was
Press START/PAUSE key for
not pressed for long
longer.
enough.
The door cannot be closed.
Child safety device engaged.
Release the child safety device.
Display shows: ”Selection
error”.
The selected function
cannot be combined
with other programme
settings.
Make another selection.
Display shows: “Door not
Closed/Please check”
Close door - there should be
Door not closed properly. an audible click.
Start programme again.
Tap turned off.
Display shows: “No incoming water/Check tap &
Hose”
Turn the tap on.
The filter in the threaded Turn off the tap. Unscrew the
inlet hose fitting is
hose, take out the filter and
blocked.
clean it.
Water tap is blocked
with limescale or faulty.
Check the water tap and have
it repaired if necessary.
27
Problem
Possible cause
Transit packaging has
not been removed.
Washing machine vibrates
when operating or is noisy. Screw feet not correctly
adjusted.
Washing has not been
spun.
Remedy
Remove transit packaging.
Adjust feet according to the
Installation and Connection
instructions.
Always load the drum as full
Only a few large items of
as possible. Mix large and
washing in the drum.
small items.
Screw connection on the
Screw the inlet hose in firmly.
inlet hose is leaking.
Water is running out from
under the washing
machine.
Display shows: “Excess Detergent”
Display shows:
– “No drain - check/drain
hose/filter” or
– “Pump Blocked”
Drain hose is leaking.
Replace drain hose.
Drain pump cover is not
closed properly.
Close the cover properly.
Washing was caught in
the door.
Load washing carefully for
the next wash.
Emergency drain hose is
leaking.
Close off emergency drain
hose properly.
Probably too much detergent has been used.
Dose detergent exactly as instructed by manufacturer.
Kink in drain hose.
Remove kink.
Maximum pumping
height of 1m exceeded.
Please contact your Service
Force Centre
Drain pump is blocked.
Switch off the appliance. Pull
out mains plug.
Clean the drain pump. Remove foreign bodies from the
pump housing.
For sink spigot connections: spigot is blocked.
Clean out spigot.
Conditioner insert in the
Fabric softener not rinsed
Clean the detergent dispenser
compartment for addiin, compartment for addrawer, insert the conditioner
tives is not correctly atditives is filled with water.
insert firmly.
tached or is blocked.
28
Problem
Possible cause
Door locked.
The door cannot be opened There has been a power
when the appliance is
cut. (All displays are off.)
switched on.
For safety reasons, the
door will remain locked
for between 4 and 10
minutes.
Washing is heavily creased.
Possibly too much
washing was loaded.
Remedy
Wait until the display alternately shows “Door openable” and
“Cycle ended”.
The programme will continue
when the power cut is over.
To remove washing:
If water can be seen in the appliance, before opening the
door, first perform an emergency drain.
Observe maximum loads.
If the wash result is not satisfactory
The washing is grey and there are limescale deposits in the drum
• Too little detergent was used.
• An incorrect detergent was used.
• Individual stains were not pre-treated.
• The programme or temperature was not set properly.
There are grey stains on the washing
• Items that were soiled with ointments, fats or oils were washed using
too little detergent.
• The wash temperature used was too low.
• A common cause is that conditioner – in particular the type in concentrated form - has come in contact with the washing. Wash out
such marks as soon as possible and exercise care when using the said
conditioner.
Foam can still be seen following the final rinse
• Modern detergents can cause foam to be created even during the final rinse. In spite of this, the washing has been sufficiently rinsed.
There are white residues on the washing
• What can be seen here are insoluble substances which modern detergents contain. They are not the result of insufficient rinsing.
Shake or brush the washing. If possible turn the washing inside out
before washing. Check your choice of detergent. Especially with dark
colours it is advisable to use liquid detergents.
29
Carrying out an emergency drain
1
Warning! Prior to carrying out an emergency drain, switch off the
washing machine and remove the power plug from the power point.
Warning! The water that comes out of the emergency drain hose may
be hot. There is a risk of scalding. Let the water cool before performing
an emergency drain!
1. Open the plinth flap and remove it.
2. Remove the emergency drain hose.
3. Place a shallow container underneath it. Then loosen the drain plug
by turning it in an anti-clockwise
direction and pull it out.
4. The water will run out. If it is necessary to empty the container more
than once, seal up the emergency
drain hose with the drain plug while
you are doing so.
When the water has all drained away:
5. Insert the plug firmly into the emergency drain hose and turn it in a
clockwise direction until it is firmly in place.
6. Replace the emergency drain hose into the retainer.
7. Insert the plinth flap into place and close it.
30
Drain pump
1
The drain pump is maintenance-free. It is only necessary to open the
pump cover if there is a malfunction and water is no longer being
pumped out, e.g. if the pump wheel is blocked.
Before loading the machine, please always ensure that there are no foreign bodies present in the pockets or in between the items to be
washed. Paper clips, nails, etc. which may find their way into the washing machine along with the washing will remain in the drain pump
housing (foreign body trap that protects the pump wheel).
Warning! Before opening the cover of the drain pump, switch off the
washing machine and remove the power plug from the power point.
1. First carry out an emergency drain.
2. Place a cloth on the floor in front of the cover of the drain pump.
Residual water runs out.
3. Unscrew the pump cover in an anticlockwise direction and remove it.
4. Remove foreign bodies and fluff
from the pump housing and from
the pump wheel.
5. Check whether the pump wheel
right at the back of the pump housing can turn. (If the wheel rotates
with a jerky motion, this is normal.)
If the pumping wheel cannot be
turned, please contact your local
Service Force Centre.
6. Insert the pump cover. Insert the
guides at the sides of the cover into
the guide slots and tighten the cover by turning in a clockwise direction.
7. Close off the emergency drain hose
and place it in the retainer.
8. Close the plinth flap.
31
Disposal
2
2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
Old appliance
W
The symbol
on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
32
Technical data
5
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Height x Width x Depth
850 x 598 x 640 mm
Depth when door is open
1017 mm
Height adjustment
approx. +10/-5mm
Load (depending on programme)
Max. 7kg
Area of use
Domestic
Drum spin speed
see Rating Plate
Water pressure
1-10bar (=10–100N/cm2=0.1–1.0MPa)
Consumption values
The consumption values were obtained under standardised conditions.
They may vary when operating in domestic conditions.
Programme knob
(Temperature)
Type of
material
Load
in kg1)
Water
in litres
Energy
in kWh
ENERGY SAVING 2)
Cotton
7
45
1.19
COTTON 95
Cotton
7
58
2.30
LINEN/EASY-CARES 40
STAIN 2)
Cotton
7
55
0.80
LINEN/EASY-CARES 40 2)
Synthetics
3.5
55
0.55
DELICATE 30
Synthetics
3.5
58
0.45
Wool
2
50
0.35
WOOL
(HANDWASH) 30
1) The load is determined in accordance with EN 60456 standard loads.
2) Note: Programme setting for tests in accordance with or supporting EN 60 456 and
IEC 60 456.
Consumption values will vary from the values quoted depending on water pressure,
water hardness, water temperature at filling, room temperature, type and quantity of
washing, detergent used, variations in mains voltage and any options selected.
33
Installation and connection instructions
1 Safety information concerning
installation
• This washing machine cannot be built-in.
• Before using for the first time, check the appliance for damage sustained while it was being transported. Do not under any circumstances connect an appliance that is damaged to the mains. In the event of
damage to the appliance contact your supplier.
• Be sure to remove all the components of the transport lock before using the appliance for the first time. Otherwise when spinning damage
may be caused to the appliance or to neighbouring units or furniture.
• Before using the appliance for the first time, splash protection must
be completed. (See “Removing transit packaging”).
• Always plug the mains plug into a correctly installed shockproof
socket.
• If hard-wired: hard-wiring to the mains may only be carried out by
an a qualified electrician.
• Prior to using the appliance for the first time, ensure that the rated
voltage and current on the rating plate match the mains voltage and
current where the appliance is to be installed. The required fuse protection is also to be found on the rating plate.
• If work on the plumbing is required for the proper connection of the
washing machine to the water supply, this must be undertaken by a
registered plumber.
• If work on the electricity supply system is required for the proper
connection of the washing machine to the electricity supply, this
must be undertaken by a registered electrician.
• The washing machine’s mains cable must only be replaced by a
Service Force Engineer
Installing the appliance
Transporting the appliance
1
34
Warning: The washing machine is very heavy. There is a risk of injury.
Exercise care when lifting the appliance.
• Do not lay the washing machine on its front nor on its right side
(as seen from the front). Electrical components may get wet.
• Never transport the appliance without using the transport lock. Only
remove the transport lock when the appliance is in its place of installation. Transporting the appliance without the use of the transport
lock can cause damage to the appliance.
• Never lift the appliance by the door when it is open nor by the plinth.
When using a sack trolley to transport the washing machine:
• Only use the sack trolley on the side of the appliance.
Unpacking
1
The transport safeguard must be removed before putting the appliance
into operation.
Important!
You are advised to keep all the packaging for re-use in case the
machine is to be transported again.
1. After removing all the packaging,
with assistance carefully lay machine on it’s back to remove the polystyrene base from the bottom.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
35
3. With a suitable spanner unscrew and
remove the central rear bolt A. Slide
out the relevant plastic spacer.
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C.
5. Remove the bracket D.
6. Tighten up the six smaller bolts C.
36
7. Open the porthole and remove the
polystyrene block fitted with the adhesive tape on the door seal.
8. Fill the smaller upper hole and the
two large ones with the corresponding plastic plug caps supplied in the
bag containing the instruction
booklet.
Important!
All the different plug caps are supplied with the appliance in the plastic bag containing the instruction
booklet.
Connect the water inlet hose as described under the paragraph “Water
inlet”.
Where to install
Important! The washing machine must not be operated in a room
where there is a danger of frost. There is a risk of frost damage or adverse effect on the perfomance of the machine. Frost damage is not
covered under the warranty.
• The surface on which the appliance is to be installed must be firm
and level. Do not install the appliance on carpeted floors or soft floor
coverings.
• The surface on which the appliance is to be installed must be clean
and dry and free from grease, so that the appliance does not slide.
• If the location in which the appliance is to be installed is fitted with
small-format tiles, put a rubber mat (available in the shops) under
the appliance.
37
Making the appliance level
3
Automatic foot: The rear foot on the left-hand side of your washing
machine is built as a shock absorbing foot, which is why the appliance
gives in the back left-hand corner if put under load. The automatic foot
guarantees that the appliance does not move even at high spin speeds.
Basically the automatic foot does not need to be set.
The four feet of the appliance are
pre-adjusted.
Large degrees of unevenness can be
compensated for by individually adjusting the height adjustable screw
feet.
Use the special spanner supplied to
do this.
Important Do not use pieces of
wood, cardboard or such like to level out unevenness in the floor, but
adjust the height adjustable screw
feet instead.
Electrical Connection
1
38
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
WARNING – THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should these safety measures
not be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate.
The appliance is supplied with a 13 amp plug fitted. In the event of
having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires in the mains lead are
coloured in accordance with the
following code:
1
Green and Yellow:
Earth
Blue:
Neutral
Brown:
Live
• The wire coloured green and yellow
must be connected to the terminal
marked with the letter “E“ or by the
earth symbol E or coloured green and yellow.
• The wire coloured blue must be connected to the terminal “N“ or
coloured black.
• The wire coloured brown must be connected to the terminal marked
“L“ or coloured red.
• Upon completion there must be no cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheath.
WARNING! A cut off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut off plug is disposed of safely.
Permanent Connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This appliance complies with the requirements laid out in the EEC Directive 76/899.
Voltage 240 V AC: Fuse rating 13amps
See rating plate for further information.
This appliance meets VDE requirements.
Particular regulations of local electricity authorities must be observed.
This appliance conforms to EEC Directive No. 82/499/EWG on radio interference.
39
1
WARNING! Repairs to electrical appliances must only be carried out by
trained personnel. Improper repairs may lead to serious risks for the user.
Connecting to the water supply
Permitted water pressure
The water pressure must be at least 1 bar (=10N/cm2 =0.1MPa), and
may be a maximum of 10bar (=100N/cm2 =1MPa).
– If more than 10bar: Connect a pressure reduction valve.
– If less than 1bar: Disconnect the appliance end of the inlet hose from
the solenoid inlet valve and remove the flow meter. (In addition remove the filter using pointed pliers and take out the rubber gasket
behind it.) Replace the filter.
Water inlet
Attention!
• An inlet hose is supplied and can be found inside the machine drum.
• Do not use the hose from your previous machine to connect to
the water supply.
• This appliance must be connected to a cold water supply.
1. Open the porthole and extract the inlet hose.
2. Connect the hose with the angled
connection to the machine.
Important!
Do not place the inlet hose downwards. Angle the hose to the left
or right depending on the position
of your water tap.
3. Set the hose correctly by loosening
the ring nut. After positioning the
inlet hose, be sure to tighten the
ring nut again to prevent leaks.
40
4. Connect the hose to a tap with a
3/4” thread.
Always use the hose supplied with
the appliance.
Water Drainage
The appliance drain hose should hook into a standpipe, the hook in the
drain hose is formed using the plastic “U-Piece“ supplied. The standpipe
should have an internal diameter of approximately 38 mm (see diagram) thus ensuring there is an air break between the drain hose and
standpipe.
Important! It is essential to lay the drainage hose without kinks.
When discharging into a standpipe ensure that the top of the
curve in the hose end is no more
than 90 cm (35.4’’) and no less
than 60 cm (23.6’’) above floor
level.
The upright standpipe should
have a minimum, length of 30 cm
(12’’) from the bottom of the elbow to the top of the pipe (see
diagram). Make sure that it is designed in such a way that the end
of the drain hose cannot be covered with water.
Longer drain hoses are available
in lengths of 2.7 and 4 metres
from your Service Force Centre.
41
For drainage into an outlet
spigot: If the outlet spigot has not
been used before, remove any blanking plug that may be in place. Push
the drain hose onto the spigot and
secure with a clip if required. Ensure
the drain hose is looped upwards to
prevent waste water from the sink
entering the washing machine.
Important! The end of the drainage hose must not be submerged in the
pumped-out water. Otherwise, the water could be sucked back into the
appliance.
Pumping heights of over 1 metre
The washing machine’s drain pump is able to pump water to a height of
1metre, calculated from the surface on which the appliance is installed.
Important! If pumping height is over 1 metre malfunctions and damage to the appliance may arise.
For pumping heights over 1metre a conversion kit can be obtained.
Please contact Service Force Centre.
42
Guarantee/Customer Service
Great Britain
Standard guarantee conditions
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage
on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated
on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer's operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject
to rental agreements.
• Products of AEG manufacture which are not marketed by AEG.
43
European Guarantee
This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user
manual, for the period specified in the appliance guarantee or otherwise by law. If you move
from one of these countries to another of the countries listed below the appliance guarantee
will move with you subject to the following qualifications:• The appliance guarantee starts from the date you first purchased the appliance which will be
evidenced by production of a valid purchase document issued by the seller of the appliance.
• The appliance guarantee is for the same period and to the same extent for labour and parts as
exists in your new country of residence for this particular model or range of appliances.
• The appliance guarantee is personal to the original purchaser of the appliance and cannot be
transferred to another user.
• The appliance is installed and used in accordance with instructions issued by Electrolux and is
only used within the home, i.e. is not used for commercial purposes.
• The appliance is installed in accordance with all relevant regulations in force within your new
country of residence.
The provisions of this European Guarantee do not affect any of the rights granted to you by law.
44
www.electrolux.com
p
t
b
Albania
+35 5 4 261 450
Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/
Belgien
+32 2 363 04 44
Bergensesteenweg 719, 1502 Lembeek
Èeská republika
+420 2 61 12 61 12
Budìjovická 3, Praha 4, 140 21
Danmark
+45 70 11 74 00
Sjællandsgade 2, 7000 Fredericia
Deutschland
+49 180 32 26 622
Muggenhofer Str. 135, 90429 Nürnberg
Eesti
+37 2 66 50 030
Mustamäe tee 24, 10621 Tallinn
España
+34 902 11 63 88
Carretera M-300, Km. 29,900
Alcalá de Henares Madrid
France
www.electrolux.fr
Great Britain
+44 8705 929 929
Addington Way, Luton, Bedfordshire
LU4 9QQ
Hellas
+30 23 10 56 19 70
4 Limnou Str., 54627 Thessaloniki
Hrvatska
+385 1 63 23 338
Slavonska avenija 3, 10000 Zagreb
Ireland
+353 1 40 90 753
Long Mile Road Dublin 12
Italia
+39 (0) 434 558500
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Latvija
+37 17 84 59 34
Kr. Barona iela 130/2, LV-1012, Riga
Lietuva
+370 5 2780609
Verkių 29, LT09108 Vilnius
Luxembourg
+35 2 42 43 13 01
Rue de Bitbourg, 7, L-1273 Hamm
Magyarország
+36 1 252 1773
H-1142 Budapest XIV,
Erzsébet királyné útja 87
Nederland
+31 17 24 68 300
Vennootsweg 1, 2404 CG Alphen aan den Rijn
Norge
+47 81 5 30 222
Risløkkvn. 2 , 0508 Oslo
Österreich
+43 18 66 400
Herziggasse 9, 1230 Wien
Polska
+48 22 43 47 300
ul. Kolejowa 5/7, Warsaw
Portugal
+35 12 14 40 39 39
Quinta da Fonte - Edificio Gonçalves
Zarco - Q 35
2774 - 518 Paço de Arcos
Romania
+40 21 451 20 30
Str. Garii Progresului 2, S4, 040671 RO
Schweiz/Suisse/
Svizzera
+41 62 88 99 111
Industriestrasse 10, CH-5506 Mägenwil
45
46
p
t
b
Slovenija
+38 61 24 25 731
Electrolux Ljubljana, d.o.o.
Tržaška 132, 1000 Ljubljana
Slovensko
+421 2 43 33 43 22
Electrolux Slovakia s.r.o., Electrolux
Domáce spotrebièe SK, Seberíniho 1,
821 03 Bratislava
Suomi
+35 8 26 22 33 00
Konepajanranta 4, 28100 Pori
Sverige
+46 (0)771 76 76 76
Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm
Türkiye
+90 21 22 93 10 25
Tarlabaþý caddesi no : 35 Taksim
Istanbul
Ðîññèÿ
+7 495 9377837
129090 Ìîñêâà, Îëèìïèéñêèé
ïðîñïåêò, 16, ÁÖ „Îëèìïèê“
Service and Spare Parts
If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning:
0870 5 929 929
Your telephone call will be automatically routed to the Service Force
Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
www. serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the rating
plate)
5. The purchase date.
Please note that a valid purchase receipt or guarantee documentation is
required for in-guarantee service
calls.
Customer Care
For general enquiries concerning
your AEG appliance, or for further
information on AEG products please
contact our Customer Care Department by letter or telephone at the
address below or visit our website at www.aeg.co.uk.
Customer Care Department For Customer Service in the Republic
of Ireland please contact us at the adMajor Appliances
dress below:
AEG Domestic Appliances
AEG/ Electrolux Group (Ire) Ltd
Addington Way
Long Mile Road/ Dublin 12
Luton
Republic of Ireland
Bedfordshire, LU4 9QQ
Tel: 08705 350350 (*)
Tel: +353 (0) 1 4090754
Email: service.eid@electrolux.ie
(*) Calls may be recorded for training purposes
47
www.electrolux.com
www.aeg-electrolux.co.uk
132 977 180-00-310806-01
Subject to change without notice
Download PDF

advertising