AEG CHDF 6260 Ventilation Hood User Manual

Instructions
Everio Controller
for JVC Everio
Bluetooth application software for
smartphone
English
LYT2367-002A
Contents
Introduction........................................................................... 2
Installing the application.................................................... 3
When using Blackberry..................................................................................................3
When using Touch Pro/Touch Diamond/HD2........................................................4
Uninstalling the application.........................................................................................5
Preparing the Camera for Bluetooth connection......... 6
When using Blackberry............................................................................................... 11
When using Touch Pro/Touch Diamond............................................................... 11
Starting/quitting the application....................................12
Starting the application............................................................................12
Quitting the application............................................................................14
Using the application.........................................................15
Using the remote control function.......................................................15
BlackBerry–movie playback mode.......................................................................... 17
BlackBerry–movie recording mode........................................................................ 20
BlackBerry–photo playback mode.......................................................................... 23
BlackBerry–photo recording mode......................................................................... 26
Touch Pro/Touch Diamond/HD2–movie playback mode............................... 28
Touch Pro/Touch Diamond/HD2–movie recording mode............................. 31
Touch Pro/Touch Diamond/HD2–photo playback mode............................... 34
Touch Pro/Touch Diamond/HD2–photo recording mode.............................. 37
Using the GPS function.............................................................................39
When using BlackBerry................................................................................................ 39
To turn on/off the GPS function............................................................................... 39
Using the monitor function.....................................................................41
To turn off the monitor function.............................................................................. 41
Using the image capture function........................................................42
Troubleshooting.................................................................43
1
Introduction
Installing the application software on your smartphone enables you to connect
it to your camcorder through Bluetooth and to use the functions below.
Controlling the camcorder with the smartphone —
remote control function
You can carry out basic operations of the camcorder with your smartphone as
you can with the remote control.
Adding location information to recording data —
GPS function
You can send location information to the camcorder utilizing the GPS function
of the smartphone and add the information to the recording data. Location
information is sent only when the camcorder is in the recording mode (movie/
photo).
Caution
Packet communication fees may be charged by using the GPS function.
Displaying your camcorder's view on your
smartphone — monitor function
In the movie recording mode, you can see your camcorder's view sent to your
smartphone periodically.
Capturing an image from your camcorder onto
your smartphone — image capture function
You can capture a playback image (a frame of a movie or a photo) onto your
smartphone with it automatically resized.
The function is available when the camcorder is in the playback mode (movie/
photo).
2
Installing the application
Installing the application
Install the application on your smartphone.
When using BlackBerry
Preparation
11
Install Desktop Manager on the PC.
22
Connect the PC and the smartphone using the USB cable
supplied with the smartphone.
Use “BlackBerry Desktop Software” on the CD-ROM supplied with
your smartphone to install Desktop Manager.
33
Download “EverioController.zip” from the download
44
Right-click "EverioController.zip" and select [Extract All] to
site (http://www.jvc-victor.co.jp/english/download/
bluetooth/index.html) and save it on Desktop of the PC.
decompress the file.
Installation
11
22
33
44
55
Start Desktop Manager on the PC to show Main Menu.
Select [Application Loader].
Click [Start] on [Add/Remove Applications].
Tick the [Everio Controller] checkbox on [Select Device
Applications] and click [Next].
If [Everio Controller] is not listed, select “Everio Controller” using
[Browse].
Confirm that Everio Controller is added to the application
list and click [Finish].
3
Installing the application
When using Touch Pro/Touch Diamond/HD2
Preparation
11
Install synchronization software on your PC.
22
Connect the PC and the smartphone using the USB cable
supplied with the smartphone.
33
Open [Program Files] on the PC.
44
Download ”setup.CAB” from the download site (http://
www.jvc-victor.co.jp/english/download/bluetooth/index.
html) and save it in [Program Files] above.
Windows XP: ActiveSync
Windows Vista/Windows 7: Windows Mobile Device Center
* For details, refer to the instruction manual of your smartphone.
Windows XP:
Open [Start] - [My Computer] - [Mobile Devices] - [My Windows
Mobile Devices] - [Program Files].
Windows Vista/Windows 7:
1 Start Windows Mobile Device Center.
2 On Windows Mobile Device Center, select [Connect without setting
up your device] - [File Management] - [Browse the contents of your
device] - [\] - [Program Files].
Installation
•• When using Touch Pro/Touch Diamond
11
Open [Start] - [Programs] - [File Explorer] - [Program Files]
on the smartphone.
22
Tap ”setup.CAB” on the smartphone.
•• When using HD2
11
22
33
Open [Start] - [File Explorer] on the smartphone.
Tap [Program Files] on the smartphone.
Tap ”setup.CAB” on the smartphone.
4
Installing the application
Uninstalling the application
When using BlackBerry
•• To uninstall the application on BlackBerry
1 Click [Options] on Desktop.
2 Click [Advanced Options] on the option list.
3 Click [Applications] on the advanced option list.
4 Select [Everio Controller] on the application list and press the menu key.
5 Click [Delete] on the menu.
•• To uninstall the application using Desktop Manager
1 Start Desktop Manager on the PC and open the main menu.
2 Click [Application Loader] on the main menu.
3 Click [Start] under the [Add/Remove Applications].
4 Remove the tick in the checkbox by [Everio Controller] under [Select
Device Applications] and click [Next].
If [Everio Controller] is not listed, select “Everio Controller” using [Browse].
5 Click [Finish].
When using Touch Pro/Touch Diamond/HD2
•• When using Touch Pro/Touch Diamond
Delete “EverioController” in [Program Files] following the steps below.
1 Select [Start] - [Settings] - [System] - [Delete Program] and delete
“EverioController”.
2 Select [Start] - [Programs] - [File Explorer] to open [Program Files] and
delete the “EverioController” folder.
•• When using HD2
Delete “EverioController” in [Program Files] following the steps below.
1 Select [Start] - [Settings] - [Application] - [Remove Programs] and delete
“EverioController”.
2 Select [Start] - [File Explorer] to open [Program Files] and delete the
“EverioController” folder.
5
Preparing the Camera for Bluetooth connection
Preparing the Camera for Bluetooth connection
Mutual registration (pairing) between your camcorder and smartphone is
required for their Bluetooth connection before using the application.
Note
· Refer also to the manuals of your smartphone and camcorder for pairing.
11 Activate the Bluetooth function of the smartphone.
•• When using Blackberry
11
22
33
Press the menu key.
Select [Manage Connections].
Select [Bluetooth] and tick the checkbox.
•• When using Touch Pro/Touch Diamond
11
22
33
Select [Start] - [Settings].
Open [Connection] tab and select [Bluetooth].
Open [Mode] tab and tick [Turn on Bluetooth] and [Make
this device visible to other devices] checkboxes.
•• When using HD2
11
22
33
44
Tap [Start] - [Settings].
Tap [Menu] - [All Settings] - [Bluetooth].
When prompted to turn on Bluetooth, tap [Yes].
Tap the settings tab (
) and then tap [Always Visible]
on the drop-down menu at [
55
].
Tap [Done].
The smartphone gets ready for connection and becomes detectable for
other equipment.
6
Preparing the Camera for Bluetooth connection
2
Detect the smartphone from the camcorder.
2-1
Tap [MENU].
2-2
Tap[ ].
2-3
Tap [Bluetooth] .
The menu screen appears.
7
Preparing the Camera for Bluetooth connection
2-4
Tap [REGISTER DEVICE] .
2-5
Tap [WAIT FOR DEVICE]
8
Preparing the Camera for Bluetooth connection
2-6
Tap [OK] when [ WAIT FOR REQUEST FROM Bluetooth
DEVICE ALL CURRENT CONNECTIONS WILL BE
DISCONNECTED] is displayed.
• This unit goes into a standby mode to wait for registration requests
from Bluetooth-compliant devices. Perform the registration
settings on the device to register.
• The method of setting varies with the device. Refer also to the
instruction manual of the device.
2-7
Tap [YES.].
9
Preparing the Camera for Bluetooth connection
3
Enter the pass key on the camcorder.
• When using BlackBerry/Touch Pro/Touch Diamond
Enter a 4 digit number you like ( “0000”, for example).
3-1
3-2
Enter the passkey for the device to register.
Tap [SET] after entering all digits.
After entering it, the camcorder waits for authentication of the
smartphone.
4
• When using HD2
Entering the pass key is not required. Wait until the message
“REGISTERED” appears on the “DEVICE REGISTRATION” screen.
Enter the pass key on the smartphone.
• When using BlackBerry/Touch Pro/Touch Diamond
Enter the same pass key you entered in Step 3.
Pairing is finished.
• When using HD2
If you use HD2, entering the pass key is not required. Tap [Yes] when the
message [Allow this pairing?] appears.
10
Preparing the Camera for Bluetooth connection
When using Blackberry
Configure the setting below to use the GPS function.
11
Press the menu key and select [Options] - [Advanced
Options] - [GPS].
22
33
44
Set [GPS Data Source] to [Device GPS].
Set [GPS Service] to [Location ON].
Press the menu key and select [Save].
When using Touch Pro/Touch Diamond
Register the camcorder after pairing following the steps below.
* If you use HD2, the following operation is not required.
11
22
33
44
55
66
77
88
99
Select [Start] - [Settings].
Open [Connection] and select [Bluetooth].
Open [Devices] and select a camcorder to connect to.
Tick the [Serial port] checkbox and tap [Save].
Open the [COM Ports] tab and select [New Outgoing Port].
Select a camcorder to connect to and tap [Next].
Select the [COM 0] port.
Remove the tick in the [Secure Connection] checkbox and
tap [Finish].
If [COM 0] is already in use, select the port which has the next
youngest number. If you cannot register, select the next port and try
again.
Tap [OK] on the upper right to close the setting screen.
11
Starting/quitting the application
Starting/quitting the application
Starting the application
1
2
Start the application on the menu of the
smartphone.
Prepare for Bluetooth connection on the camcorder.
2-1
Tap [MENU].
2-2
Tap [ ] .
2-3
Tap [Bluetooth] .
The menu screen appears.
12
Starting/quitting the application
3
2-4
Tap [CONNECT].
2-5
Tap [SMARTPHONE] .
2-6
Select and tap on the smartphone to connect to from
the list.
Select [OK] on the smartphone.
The bluetooth device list appears on the smartphone’s screen.
13
Starting/quitting the application
44 Select a camcorder to connect to and Select [OK].
The application shows the operation screen after the Bluetooth
connection is established.
55 Select [X] on the camcorder to close the menu
screen.
Now you can operate the camcorder using the smartphone.
Quitting the application
•• When using BlackBerry
Press the menu key and select [Close] to quit the application. The Bluetooth
connection is automatically shut down as the application is quit.
•• When using Touch Pro/Touch Diamond/HD2
Tap
on the bottom right of the screen to quit the application.
The Bluetooth connection is automatically shut down as the application is quit.
Note
· The application is automatically quit if the communication with the
camcorder breaks for more than 10 seconds.
Caution
Do not quit the application in any other way than shown above.
Note
•• Everio Controller software location after installation (BlackBerry)
1 Press the menu key on the home screen to show the application list.
2 Select the download icon and click it to show the EverioController icon.
•• Moving the icon (BlackBerry)
The example explained here is the moving the application icon to the home
screen.
1 Select the EverioController icon and press the menu key.
2 Select [Move to Folder] and click it.
3 Select [Root] (or [Home]) and click it.
4 Press the menu key on the home screen to show the application list.
5 Select the EverioController icon and press the menu key.
6 Select [Move] and move the icon to the top of the application list.
14
Using the application
Using the application
Using the remote control function
You can carry out basic operations of the camcorder with your smartphone as
you can with the remote control.
The operation screen will change as the mode of the camcorder is switched.
• BlackBerry
The application is operated using the twelve keys on
the left side of the keyboard. You can use the trackball
in place of the keys of E/2(TELE), X/8(WIDE), S/4(RW),
F/6(FF) and D/5(PLAY).
Movie playback mode (refer to page 17)
Movie recording mode (refer to page 20)
Photo playback mode (refer to page 23)
Photo recording mode (refer to page 26)
Keys for remote control
(refer to page 18, 21, 24, 27)
• Touch Pro/Touch Diamond/HD2
Tap the buttons on the screen to operate the
application.
Movie playback mode (refer to page 28)
Movie recording mode (refer to page 31)
Photo playback mode (refer to page 34)
Photo recording mode (refer to page 37)
Buttons for remote control
(refer to page 29, 32, 35, 38)
15
Using the application /Using the remote control function
Note
· The appearance of the operation screen may differ depending on the
smartphone model you use.
· You cannot control the camcorder from the smartphone if the menu screen
is opened on the camcorder.
16
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
BlackBerry–movie playback mode
The operation screen below is shown on the smartphone when the camcorder is
in the movie playback mode.
Display indications
1. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when
the camcorder is powered through AC adapter, regardless of the remaining
battery level.
2. Available keys
They show the keys available for controlling the camcorder.
3. Mode
It indicates the current mode of the camcorder.
17
Using the application /Using the remote control function
Functions of keys
D/5 (PLAY)
Press it to play/pause the camcorder.
It is used for confirming the selection while thumbnails are displayed on the
screen.
F/6 (FF)
Press it for fast-forwarding while playing back.
Pressing this during fast-forwarding/fast-reversing makes the playback speed
faster (4 steps).
Pressing this during pause starts frame-by-frame playback and Pressing and
holding this during frame-by-frame playback starts slow motion playback.
It is used for moving the cursor to the right while thumbnails are displayed on
the screen.
S/4 (RW)
Press it for fast-reversing while playing back.
Pressing this during fast-forwarding/fast-reversing makes the playback speed
slower (4 steps).
Pressing this during pause starts frame-by-frame playback and Pressing and
holding this during frame-by-frame playback starts slow motion playback.
It is used for moving the cursor to the left while thumbnails are displayed on the
screen.
E/2 (TELE)
Press it to turn the volume up while playing back.
18
Using the application /Using the remote control function
X/8 (WIDE)
Press it to turn the volume down while playing back.
C/9 (INDEX)
Press it to stop playback and return to thumbnails.
Z/7 (SNAP SHOT)
Press it to take a photo from the camcorder when playback is paused.
Q (CAPTURE)
Press this to capture the image on the display of the camcorder onto the
smartphone when playback is paused (image capture function).
19
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
BlackBerry–movie recording mode
The operation screen below is shown on the smartphone when the camcorder is
in the movie recording mode.
Display indications
1. Recording status indication
It indicates the status of the camcorder: recording or pausing.
2. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when the
camcorder is powered through AC adapter, regardless of the remaining battery
level.
3. GPS indication
It is indicated when the GPS function is activated. It is indicated with a cross icon
when the smartphone cannot receive GPS signals.
4. Available keys
It shows the keys available for controlling the camcorder.
Note
· You can use keys for operations even when the monitor function is activated
and the available keys are not shown.
20
Using the application /Using the remote control function
5. Image display
It shows the camcorder’s view when the monitor function is activated.
A part of the display is covered with the available keys when using both.
6. Mode
It indicates the current mode of the camcorder.
Functions of keys
Q (MONITOR)
Press it to turn on/off the monitor function.
The camcorder’s view is shown in periodically-changing still images when the
function is activated.
Note
· Pressing the alt key shows/hides the available keys while displaying an image.
W/1 (REC START)
Press it to start movie recording.
R/3 (REC STOP)
Press it to stop movie recording.
E/2 (TELE)
Press it to zoom in.
21
Using the application /Using the remote control function
X/8 (WIDE)
Press it to zoom out.
A (GPS)
Press it to turn on/off the GPS function.
The location information received by the smartphone is sent to the camcorder
when the function is activated.
Note
· The location information is updated every 15 seconds while the GPS function
is activated.
alt (DISP)
Press it to show/hide the available keys when the monitor function is activated.
Note
· You can use keys for operations even when the available keys are not shown.
22
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
BlackBerry–photo playback mode
The operation screen below is shown on the smartphone when the camcorder is
in the photo playback mode.
Display indications
1. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when
the camcorder is powered through AC adapter, regardless of the remaining
battery level.
2. Available keys
It shows the keys available for controlling the camcorder.
3. Mode
It indicates the current mode of the camcorder.
23
Using the application /Using the remote control function
Functions of keys
D/5 (PLAY)
Press it to play/pause the camcorder.
It is used for confirming the selection while thumbnails are displayed on the
screen.
F/6 (FF)
Press it to show the next photo.
It is used for moving the cursor to the right while thumbnails are displayed on
the screen.
S/4 (RW)
Press it to show the previous photo.
It is used for moving the cursor to the left while thumbnails are displayed on the
screen.
E/2 (TELE)
Press it to move the cursor up while thumbnails are displayed on the screen.
X/8 (WIDE)
Press it to move the cursor down while thumbnails are displayed on the screen.
24
Using the application /Using the remote control function
C/9 (INDEX)
Press it to stop playback and return to thumbnails.
Q (CAPTURE)
Press this to capture the still image on the display of the camcorder onto the
smartphone (image capture function).
25
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
BlackBerry–photo recording mode
The operation screen below is shown on the smartphone when the camcorder is
in the photo recording mode.
Display indications
1. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when
the camcorder is powered through AC adapter, regardless of the remaining
battery level.
2. GPS indication
It is indicated when the GPS function is activated. It is indicated with a cross icon
when the smartphone cannot receive GPS signals.
3. Available keys
They show the keys available for controlling the camcorder.
4. Mode
It indicates the current mode of the camcorder.
26
Using the application /Using the remote control function
Functions of keys
Z/7 (SNAP SHOT)
Press it to take a photo.
E/2 (TELE)
Press it to zoom in.
X/8 (WIDE)
Press it to zoom out.
A (GPS)
Press it to turn on/off the GPS function.
The location information received by the smartphone is sent to the camcorder
when the function is activated.
Note
· The location information is updated every 15 seconds while the GPS function
is activated.
27
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
Touch Pro/Touch Diamond/HD2–movie playback mode
The operation screen below is shown on the smartphone when the camcorder is
in the movie playback mode.
Display indications
1. Capture button
Press this to capture the image on the display of the camcorder onto the
smartphone when playback is paused (image capture function).
2. Mode
It indicates the current mode of the camcorder.
3. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when
the camcorder is powered through AC adapter, regardless of the remaining
battery level.
4. Buttons
The buttons available for controlling the camcorder are shown on this area. Tap
them to control the camcorder.
28
Using the application /Using the remote control function
Functions of buttons
PLAY
Tap it to play/pause the camcorder.
It is used for confirming the selection while thumbnails are displayed on the
screen.
FF
Tap it for fast-forwarding while playing back.
Pressing this during fast-forwarding/fast-reversing makes the playback speed
faster (4 steps).
Pressing this during pause starts frame-by-frame playback and Pressing and
holding this during frame-by-frame playback starts slow motion playback.
It is used for moving the cursor to the right while thumbnails are displayed on
the screen.
RW
Tap it for fast-reversing while playing back.
Pressing this during fast-forwarding/fast-reversing makes the playback speed
slower (4 steps).
Pressing this during pause starts frame-by-frame playback and Pressing and
holding this during frame-by-frame playback starts slow motion playback.
It is used for moving the cursor to the left while thumbnails are displayed on the
screen.
TELE
Tap it to turn the volume up while playing back.
29
Using the application /Using the remote control function
WIDE
Tap it to turn the volume down while playing back.
INDEX
Tap it to stop playback and return to thumbnails.
SNAP SHOT
Press this to capture the image on the display of the camcorder as a still image
when playback is paused.
Ver.
Tap it to show the version of the application.
Exit
Tap it to quit the application.
Note
·
REC START and
REC STOP do not function though indicated.
30
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
Touch Pro/Touch Diamond/HD2–movie recording mode
The operation screen below is shown on the smartphone when the camcorder is
in the movie recording mode.
Display indications
1. Monitor button/image display
Tap it to turn on/off the monitor function. The camcorder’s view is shown when
the function is activated.
2. Mode
It indicates the current mode of the camcorder.
3. Recording status indication
It indicates the status of the camcorder: recording or pausing.
4. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when
the camcorder is powered through AC adapter, regardless of the remaining
battery level.
31
Using the application /Using the remote control function
5. GPS indication
It is indicated when the GPS function is activated. It is indicated with a cross icon
when the smartphone cannot receive GPS signals.
6. Buttons
The buttons available for controlling the camcorder are shown on this area. Tap
them to control the camcorder.
Functions of buttons
REC START
Tap it to start movie recording.
REC STOP
Tap it to stop movie recording.
TELE
Tap it to zoom in.
WIDE
Tap it to zoom out.
GPS
Tap it to turn on/off the GPS function.
The location information received by the smartphone is sent to the camcorder
when the function is activated.
Note
· The location information is updated every 15 seconds while the GPS function
is activated.
32
Using the application /Using the remote control function
Ver.
Tap it to show the version of the application.
Exit
Tap it to quit the application.
Note
·
PLAY,
though indicated.
FF,
RW and
33
INDEX do not function
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
Touch Pro/Touch Diamond/HD2–photo playback mode
The operation screen below is shown on the smartphone when the camcorder is
in the photo playback mode.
Display indications
1. Capture button
Press this to capture the still image on the display of the camcorder onto the
smartphone (image capture function).
2. Mode
It indicates the current mode of the camcorder.
3. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when
the camcorder is powered through AC adapter, regardless of the remaining
battery level.
4. Buttons
The buttons available for controlling the camcorder are shown on this area. Tap
them to control the camcorder.
34
Using the application /Using the remote control function
Functions of buttons
PLAY
Tap it to play/pause the camcorder.
It is used for confirming the selection while thumbnails are displayed on the
screen.
FF
Tap it to show the next photo.
It is used for moving the cursor to the right while thumbnails are displayed on
the screen.
RW
Tap it to show the previous photo.
It is used for moving the cursor to the left while thumbnails are displayed on the
screen.
INDEX
Tap this to stop playback and return to the thumbnails.
35
Using the application /Using the remote control function
Ver.
Tap it to show the version of the application.
Exit
Tap it to quit the application.
Note
·
SNAP SHOT,
though indicated.
REC START and
36
REC STOP do not function
Using the application /Using the remote control function
Movie playback mode | Movie recording mode | Photo playback mode | Photo recording mode
Touch Pro/Touch Diamond/HD2–photo recording mode
The operation screen below is shown on the smartphone when the camcorder is
in the photo recording mode.
Display indications
1. Mode
It indicates the current mode of the camcorder.
2. Battery indication
Battery level of the camcorder is indicated. The AC adapter icon appears when
the camcorder is powered through AC adapter, regardless of the remaining
battery level.
3. GPS indication
It is indicated when the GPS function is activated. It is indicated with a cross icon
when the smartphone cannot receive GPS signals.
4. Buttons
The buttons available for controlling the camcorder are shown on this area. Tap
them to control the camcorder.
37
Using the application /Using the remote control function
Functions of buttons
SNAP SHOT
Tap it to take a photo.
TELE
Tap it to zoom in.
WIDE
Tap it to zoom out.
GPS
Tap it to turn on/off the GPS function.
The location information received by the smartphone is sent to the camcorder
when the function is activated.
Note
· The location information is updated every 15 seconds while the GPS function
is activated.
Ver.
Tap it to show the version of the application.
Exit
Tap it to quit the application.
Note
·
REC START,
and
REC STOP,
PLAY,
INDEX do not function though indicated.
38
FF,
RW
Using the application /Using the GPS function
Using the GPS function
You can send location information to the camcorder utilizing the GPS function of
the smartphone and add the information to the recording data.
When using BlackBerry
Configure settings as follows before using the GPS function.
11
Press the menu key to show the menu screen and select
[Options] - [Advanced Options] - [GPS].
22
33
44
Select [Device GPS] in [GPS Data Source].
Select [Location On] in [GPS Services].
Press the menu key and select [Save].
To turn on/off the GPS function
•• When using BlackBerry
Press the A key.
•• When using Touch Pro/Touch Diamond/HD2
Tap
on the screen.
When the GPS function turns on, the GPS indicator appears and indicates
whether the GPS signal is receivable or not.
The location information is sent to the camcorder every 15 seconds when it is in
the movie/photo recording mode.
39
Using the application /Using the GPS function
Changing the application’s privileges for Using the GPS function
When using BlackBerry, the [Permissions for a third-party application] dialog box
may appear as you turn on the GPS function for the first time. Select [Permit] to
use the function.
· The Application’s privileges can be changed following the steps below:
1 Select [Options] - [Advanced Options] - [Applications] - [Everio Controller].
2 Select [Edit Permissions] - [Connection].
3 Configure the setting of [Location (GPS)].
Caution
Packet communication fees may be charged depending on the GPS settings
on your smartphone or the payment system of your carrier.
40
Using the application /Using the monitor function
Using the monitor function
You can see your camcorder's view sent to your smartphone periodically.
11 Change the mode of the camcorder to the
movie recording mode.
The operation screen on the smartphone changes accordingly.
22 Turn on the monitor function.
•• When using BlackBerry
Press the Q key.
•• When using Touch Pro/Touch Diamond/HD2
Tap
on the screen.
The camcorder’s view appears on the smartphone’s screen as a still image.
Note
· On BlackBerry, pressing the alt key shows/hides the available keys. A part of
the image display is covered with them.
To turn off the monitor function
•• When using BlackBerry
Press the Q key.
•• When using Touch Pro/Touch Diamond/HD2
Tap the image.
41
Using the application /Using the image capture function
Using the image capture function
You can capture a playback image onto your smartphone by using the image
capture function.
11 Select an image to capture on the camcorder.
You can use the function when the camcorder is in either of the statuses
below.
•• While pausing movie playback
•• While playing back a photo (except when using the slideshow or
zoom function)
22 Capture the image.
•• When using BlackBerry
Press the Q key.
•• When using Touch Pro/Touch Diamond/HD2
Tap
on the screen.
The image on the camcorder is transferred to the smartphone and its
thumbnail and the save dialog box appear on the smartphone.
33 Select saving it and choose a folder to save the
image.
The overwriting confirmation dialog box appears if the same file name
exists in the folder.
The existing file is overwritten if you select [YES].
42
Troubleshooting
Problem
Cannot connect with the
camcorder.
Cause/remedy
Clear obstacles between the camcorder and the
smartphone.
Do Bluetooth pairing of the devices again.
When you use a Touch Pro/Touch Diamond,
configure the COM port settings.
Delete the camcorder’s registration on the
smartphone and do pairing again.
Deactivate the smartphone’s Bluetooth function
and activate it again, and try to connect.
Do soft reset on the smartphone and try again.
When using Touch Pro/Touch Diamond, configure
the COM port setting and try again.
Cannot operate the
camcorder.
Clear obstacles between the camcorder and the
smartphone.
Executable functions vary depending on the
status and mode of the camcorder. Check the
status and mode and try again. Close the menu if
it is opened.
The camcorder is not operatable when it is on
standby for fast-startup.
No picture from the
camcorder is displayed.
No picture from the camcorder is displayed
when its mode is anything other than the movie
recording mode.
No picture is displayed when the monitor function
is deactivated.
The Bluetooth connection may be broken. Restart
the application.
The picture does not
change when using the
monitor function.
Restart the application and connect the
camcorder again.
Image-updating-speed may become slower and
the monitoring image may looks unchanged
depending on the camcorder’s status.
43