Agilent Technologies G1978B Computer Accessories User Manual

Network Analyzer Family
Configuration Guide
Use this guide when ordering the
Agilent Network Analyzer.
Configuration Information
The Network Analyzer family consists of four hardware analysis platforms: the Network
Analyzer, Distributed Network Analyzer (DNA), Distributed Network Analyzer MX (DNA
MX) and Distributed Network Analyzer ME (DNA ME). The last of these has built-in NDISbased LAN interfaces and the remaining three accept a range of line interface modules
(LIMs), which are completely interchangeable.
The Network Analyzer, DNA, DNA MX, DNA ME, and Network Analyzer Software all
include one year of Agilent AdvantageTM support at no additional cost. Agilent
AdvantageTM support includes call center support, software update service, and webbased instructor-led training. A number of other support products and education are
available for Network Analyzer products for an additional fee.
The J6800A Network Analyzer is an “all under one handle” solution with a built-in PC and
can accept up to two LIMs in any combination; these must be ordered separately. This
analyzer is also shipped with a USB optical mouse, two CD RW media, recovery CD
media, and power cord (localized for the country of sale).
The J6801A Distributed Network Analyzer is a solution for dispatched and distributed use,
designed to be controlled from a standard PC running Microsoft Windows 2000, XP or
NT 4.0 (Service Pack 5 or greater) via a LAN connection. It can accept any of the
available LIMs; these must be ordered separately. It can also be attached to the Network
Analyzer and Distributed Network Analyzer MX platforms to provide additional ports.
®
The J6802A Distributed Network Analyzer MX is a solution with a built-in controller
running Network Analzyer Software for remote dispatched and distributed use, designed
to be accessed from a standard PC running a basic version of Network Troubleshooting
Center on Microsoft Windows® 2000, XP or NT 4.0 (Service Pack 5 or greater) via a LAN
or dial-up connection. It can accept any of the available LIMs; these must be ordered
separately.
The J6805A Distributed Network Analyzer ME is an enterprise LAN solution with a built-in
controller for distributed use, designed to be accessed from a standard PC running a basic
version of Network Troubleshooting Center on Microsoft Windows® 2000, XP or NT 4.0
(Service Pack 5 or greater) via a LAN connection. It has two built-in half-duplex
10/100Base-TX test interfaces and can test two half-duplex circuits or one full-duplex circuit.
Network Analyzer Software is pre-loaded and fully enabled on the Network Analyzer,
Distributed Network Analyzer MX and Distributed Network Analyzer ME. Network
Analyzer Software on CD media plus a single-use license key is shipped with the
Distributed Network Analyzer. The J6840A Network Analyzer Software is a productized
version of this software available for operation on any PC running Microsoft Windows
2000, XP or NT 4.0.
The Network Troubleshooting Center (NTC) software provides the means to perform
centralized testing using the various Network Analyzer hardware platforms (particularly the
J6802A and J6805A), and can also access information using SNMP/RMON/RMON2
from network equipment MIBs. A basic version of NTC software is shipped with all
Network Analyzer family hardware platforms, with the ability to remotely access and
control Network Analyzer platforms, perform SNMP-based data collection from up to four
data sources simultaneously (analyzers from the Network Analyzers family or interface
MIBs), and manage many agents. NTC also offers add-on distributed test applications,
including NTC RMON (J6782A) and NTC WLAN (J6783A).
2
Network Analyzer Software provides the following functions:
• It controls the J6800A Network Analyzer, J6801A Distributed Network Analyzer and
J6802A Distributed Network Analyzer MX hardware analyzers to provide testing on any
of the available LAN or WAN LIMs (WAN includes ATM) and it controls the J6805A
Distributed Network Analyzer ME to provide testing on its NDIS-based test interfaces.
• It runs on a PC fitted with a standard NDIS-based network interface card (10/100/1000
Mb/s Ethernet, Token Ring and FDDI) and uses this card as the measurement interface for
LAN testing.
• It acts as the client for accessing and controlling a Network Analyzer Software NDIS
Server that is operating on another PC.
• It allows the user to perform full off-line analysis on data previously captured from any
Network Analyzer family product, Agilent Advisor or NDIS-based NIC.
The Network Analyzer Software is available separately as the J6840A product, which
should be ordered for the following situations:
• For an engineer who does not own or has not ordered a hardware analyzer but who
wants to run Network Analyzer Software on a standard PC fitted with an NDIS-based
network interface card and use this for measurements and/or run off-line analysis on data
captured and saved on another PC, or Network Analyzer hardware platform.
• For an engineer who wants to access and control a Network Analyzer Software NDIS
Server operating on another PC
• For two or more engineers who want to share a Distributed Network Analyzer but control
it from their own PCs when they have access to it; the single-use license key provided
with each copy of the J6840A product will allow those engineers temporarily without
access to the Distributed Network Analyzer to perform off-line analysis on data they have
previously captured and/or perform LAN testing using a fitted LAN NDIS card. They can
also control the Distributed Network Analyzer when they have access to it.
•
•
•
•
•
•
•
•
Add-on software can also be ordered but requires Network Analyzer Software to be
present and licensed in its own right already. Add-on products currently available are:
J5425A Switch Advisor
J5434A SAN Network Analyzer
J5479A Voice Quality Tester (VQT) 10/100 Interface
J6825A ATM IMA License for the J6824A Eight-port E1/T1 LIM
J6842A 3G UMTS W-CDMA Test Software
J6844A Telephony Network Analyzer
J6845A 3G cdma2000 Test Software
J6765A RFC2544 Gigabit and 10/100 Ethernet Benchmarking
An additional standalone software product is:
• J6848A Report Center (note: this software can also be used with the Agilent Advisor)
For full details of all Network Analyzer family products, refer to the Agilent Network
Analyzer Data Sheet and the Agilent Network Analyzer Technical Overview (see the
Related Literature section).
3
Hardware Platforms
J6800A
Network Analyzer
Qty__
Includes:
Preloaded Network Analyzer Software (same as J6840A)
Basic NTC software
One year of Agilent AdvantageTM support
• Call Center Support
• Software Update Service
• Web-based instructor led training
Network Analyzer system recovery CD media
Network Analyzer Solutions Software CD media
Combo modem and 10/100Base-TX NIC
Optical USB mouse
Two CD RW blank media
Protective Jacket
Documentation CD (English and Japanese)
Power Cord
J6800A - ABA
Add US English localization of on-line help
J6800A - ABJ
Add Japanese localization of on-line help and supply Japanese
localized Windows OS recovery CD
Note: Must order Option ABA or ABJ
The basic NTC software included with this product allows the user to access and control
Network Analyzer hardware platforms (including this product, if desired) and perform
SNMP-based data collection from up to four data sources simultaneously from a remote
PC. The J6782A product should be ordered if simultaneous access to more SNMP
sources is required.
J6801A
Distributed Network Analyzer
Includes:
Network Analyzer Solutions Software CD media
with single use license key
Basic NTC software
One year of Agilent AdvantageTM support:
• Call Center Support
• Software Update Service
• Web-based Instructor-Led Training
Soft carrying case for analyzer and full-sized
laptop plus accessories for both
Documentation (CD (English and Japanese)
Power Cord
Qty__
The basic NTC software included with this product allows the user to access and control
network Analyzer hardware platforms (including this product via a PC running Windows®
XP) and perform SNMP-based data collection from up to four data sources simultaneously
from a remote PC. The J6782A product should be ordered if simultaneous access to more
SNMP sources is required.
4
J6802A
Distributed Network Analyzer MX
Includes:
Preloaded Network Analyzer Software
Network Analyzer Solutions Software CD media
Basic NTC software
One year of Agilent AdvantageTM support:
• Call Center Support
• Software Update Service
• Web-based Instructor-Led Training
Distributed Network Analyzer MX system
recovery CD media
Combo modem and 10/100Base-TX NIC
Protective Jacket
Documentation CD (English and Japanese)
Power Cord
J6802A-1AC
J6802A-1DC
AC Power Supply
-48v DC Power Supply
Qty__
Note: Must order Option 1AC or 1DC
The basic NTC software included with this product allows the user to access and control
Network Analyzer hardware platforms (including this product) and perform SNMP-based
data collection from up to four data sources simultaneously from a remote PC. The
J6782A product should be ordered if simultaneous access to more SNMP devices is
required.
J6805A
Distributed Network Analyzer ME
Includes:
Dual Port NDIS-based Test Interfaces
10/100Base-TX telemetry port
Preloaded Network Analyzer Software
Network Analyzer Solutions Software CD media
Basic NTC software
One year of Agilent AdvantageTM support:
• Call Center Support
• Software Update Service
• Web-based Instructor-Led Training
Distributed Network Analyzer ME system
recovery CD media
Documentation CD (English and Japanese)
Power Cord
Qty__
The basic NTC software included with this product allows the user to access and control
Network Analyzer hardware platforms (including this product) and perform SNMP-based
data collection from up to four data sources simultaneously from a remote PC. The
J6782A product should be ordered if simultaneous access to more SNMP sources is
required.
5
Line Interface Modules (LIMs)
J6810A
STM-4/OC-12/STM-1o/OC-3 LIM
includes
LIM
Pair of 10dB optical attenuators
Network Analyzer Solutions Software CD Media
Documentation CD (English and Japanese)
J6811A
STM-1o/OC-3 LIM
includes:
LIM
Pair of 10dB optical attenuators
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
J6813B
E3/T3 (DS3) LIM
includes:
LIM
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
J6815B
T1/E1 (RJ45/RJ48C and Bantam
Connectors) LIM
includes:
LIM
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
J6816B
E1/T1 (RJ45/RJ48C & DB9
Connectors) LIM
includes:
LIM
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
J6817B
E1 (BNC Connectors) LIM
includes:
LIM
Network Analyzer Software CD media
Documentation
Qty__
J6818A
ATM25 LIM
includes:
LIM
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
J6820A
V-Series LIM
includes:
LIM
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
Note: Must order at least one of the J6757A cable options
This module additionally requires a monitor/simulate interface cable to suit the V-series
interface to be tested. A range of cables is available and must be ordered separately as
an option of the J6757A accessory product.
6
J6821A
High-Speed Serial Interface (HSSI) LIM
includes
LIM
Network Analyzer Solutions Software CD Media
Documentation CD (English and Japanese)
Note: The J6756B HSSI Passive Tap is available to order for use with the HSSI LIM.
J6824A
Eight-port E1/T1 LIM
includes
LIM
Network Analyzer Solutions Software CD Media
Documentation CD (English and Japanese)
Note: The Eight-port E1/T1 LIM is available only for ATM IMA and single-port ATM
analysis on the Network Analyzer; and for ATM IMA, single-port ATM, and Channelized
analysis on the Signaling Analyzer.
Note: J6824A Options 001, 002, and 003 offer different E1/T1 cable packages and are
available to order for use with the Eight-port E1/T1 LIM
Note: The J6826A and J6827A Eight-port Passive Taps are available to order for use with
the Eight-port E1/T1 LIM.
J6830A
10Base-T and 10/100Base-TX Ethernet LIM
includes:
LIM
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
J6831A
10/100Base-FX Ethernet LIM
includes:
LIM
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
J6832A
1000Base-X Ethernet LIM
includes:
LIM
Pair of SX GBIC modules
Network Analyzer Solutions Software CD media
Documentation CD (English and Japanese)
Qty__
This LIM accepts two GBIC (GigaBit Interface Connector) modules. A pair of SX GBIC
modules (same as J5491A) is supplied with this LIM. The LIM also accepts J5492A LX
and J5495A Copper GBIC modules (see accessories). Any of these GBIC modules can be
used in any combination in the LIM.
Software
J5425A
Switch Advisor
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for Switch Advisor software (which is
included on Network Analyzer Software CD media)
Documentation
Note: This license key activates Switch Advisor functionality present on the version of
Network Analyzer Software supplied or later. This software can be used to upgrade the
7
software present on the Network Analyzer, Distributed Network Analyzer MX and
Distributed Network Analyzer ME, the software supplied with the Distributed Network
Analyzer and the older J6841A Network Analyzer Software.
The existing license key will be required if upgrading J6841A software to J6840A.
J5434A
SAN Network Analyzer
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for iSCSI, iSNS, iFCP and FCIP
analysis software (which is included on Network Analyzer
Software CD media)
Documentation
Note: This license key activates SAN Network Analyzer functionality present on the version
of Network Analyzer Software supplied or later. This software can be used to upgrade the
software present on the Network Analyzer, Distributed Network Analyzer MX and
Distributed Network Analyzer ME, the software supplied with the Distributed Network
Analyzer and the older J6841A Network Analyzer Software. The existing license key will be
required if upgrading J6841A software to J6840A.
J5479A
Voice Quality Tester (VQT) 10/100 Interface
includes:
VQT Software CD media
Single-use license key for VQT software
Documentation
Qty__
Note: This VQT software must be installed from the CD onto a J6800A Network Analyzer.
The license key activates functionality present in the VQT software. A separate license key
is needed for operation of PESQ (J1997A), PSQM (J1983A), or PAMS (J1982A) clarity
measurements. VQT software can only be enabled on the J6800A Network Analyzer
platform.
J6765A
RFC2544 Gigabit and 10/100 Ethernet
Benchmarking License
includes
Network Analyzer Software CD media
Single-use license key for Ethernet Benchmarking
Note: This software operates only on Network Analyzer Gigabit ad 10/100 Ethernet LIMs.
It does not operate on.
J6825A
ATM IMA License for the J6824A Eight-port
E1/T1 LIM
includes
Network Analyzer Software CD media
Single-use license key for ATM IMA
8
J6835A
Network Analyzer Software NDIS Server
Qty__
includes:
Network Analyzer Solutions Software CD media
Single-use license key for Network Analyzer
Software NDIS Server (which is included on the CD media)
Documentation CD (English and Japanese)
Note: This Network Analyzer Software NDIS Server license key activates functionality
present on the version of Network Analyzer Software supplied or later. This software
agent runs on any PC fitted with an NDIS-based network interface card for 10/100/1000
Mb/s Ethernet, Token Ring or FDDI. The same PC requirements as for the Network
Analyzer Software apply.
This product is available with options offering discounts for quantity.
J6835A 200
J6835A 201
J6835A 202
J6835A 205
J6835A 210
J6835A 299
License for 1 PC
License for 10 PCs
License for 20 PCs
License for 50 PCs
License for 100 PCs
Site-wide License (contact the division for details)
Note: Must order one of the above options
J6840A
Network Analyzer Software
includes:
Network Analyzer Solutions Software CD media
Basic NTC software
Single-use license key for Network Analyzer Software
One year of Software Update Service
Documentation CD (English and Japanese)
J6840A 200
J6840A 201
J6840A 202
J6840A 205
J6840A 299
License for 1 PC
License for 10 PCs
License for 20 PCs
License for 50 PCs
Site-wide License (contact the division for details)
Qty__
Note: Must order one of the above 2xx options
The basic NTC software included with this product allows the user to access and control
Network Analyzer hardware platforms, and perform SNMP-based data collection from up
to four data sources simultaneously from a remote PC. The J6781A product should be
ordered if simultaneous access to more devices is required.
Note: This software is already pre-loaded on the Network Analyzer, Distributed Network
Analyzer MX and Distributed Network Analyzer ME, and is supplied on CD with the
Distributed Network Analyzer together with a single-use license for use with the user’s
own PC (400 MHz or better, running Windows® 2000, Windows® XP or Windows® NT 4
SP5 or later). A copy of this software is required for each additional PC that would control
the Distributed Network Analyzer and/or for running Network Analyzer Software and/or
off-line analysis of Network Analyzer, Agilent Advisor, or NIC captured data.
9
J6842A
3G UMTS W-CDMA Test Software
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for 3G UMTS W-CDMA test software
(which is included on Network Analyzer Software CD media)
Documentation
Note: This 3G UMTS W-CDMA Test Software license key activates functionality present
on the version of Network Analyzer Software supplied or later. This software can be used
to upgrade the software present on the Network Analyzer, Distributed Network Analyzer
MX and Distributed Network Analyzer ME, the software supplied with the Distributed
Network Analyzer and the older J6841A Network Analyzer Software. The existing license
key will be required if upgrading J6841A software to J6840A.
J6844A
Telephony Network Analyzer
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for Telephony Network Analyzer
(which is included on Network Analyzer Software CD media)
Documentation
Add US English localization of manual and Network
Analyzer Software CD media
J6843A - ABA
Note: Must order Option ABA
Note: This Telephony Network Analyzer license key activates functionality present on the
version of Network Analyzer Software supplied or later. This software can be used to
upgrade the software present on the Network Analyzer, Distributed Network Analyzer MX
and Distributed Network Analyzer ME, the software supplied with the Distributed Network
Analyzer or the older J6841A Network Analyzer Software. The existing license key will be
required if upgrading J6841A software to J6840A.
J6845A
3G cdma2000 Test Software
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for 3G cdma2000 test software
(which is included on Network Analyzer Software CD media)
Documentation
Note: This license key activates functionality present on the version of Network Analyzer
Software supplied or later. This software can be used to upgrade the software present on
the Network Analyzer, Distributed Network Analyzer MX and Distributed Network
Analyzer ME, the software supplied with the Distributed Network Analyzer or the older
J6841A Network Analyzer Software. The existing license key will be required if upgrading
J6841A software to J6840A.
10
J5486A
Signaling Analyzer Software Edition
Qty__
includes:
Signaling Analyzer Software CD media
Single-use license key for Signaling Analyzer Software Edition
(which is included on Signaling Analyzer Software Edition CD
media)
Documentation
Note: This Signaling Analyzer Software Edition license key activates functionality present
on the version of Signaling Analyzer Software Edition supplied or later. This software can
be used to upgrade the software present on the Network Analyzer and Distributed
Network Analyzer MX and the software supplied with the Distributed Network Analyzer.
J7320A
Nortel Iub Vendor Decode
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for Nortel Iub Vendor Decode
(which is included on Network Analyzer Software and Signaling
Analyzer Software edition CD media)
Documentation
Note: This Nortel Iub Vendor Decode license key activates functionality present on the
version of Network Analyzer and Signaling Analyzer Software supplied or later. This
software can be used to upgrade the software present on the Network Analyzer and
Distributed Network Analyzer MX the software supplied with the Distributed Network
Analyzer and the older J6841A Network Analyzer Software. The existing license key will
be required if upgrading J6841A software to J6840A.
J7324A
Nokia Iub Vendor Decode
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for Nokia Iub Vendor Decode
(which is included on Network Analyzer Software and Signaling
Analyzer Software edition CD media)
Documentation
Note: This Nokia Iub Vendor Decode license key activates functionality present on the
version of Network Analyzer and Signaling Analyzer Software supplied or later. This
software can be used to upgrade the software present on the Network Analyzer and
Distributed Network Analyzer MX the software supplied with the Distributed Network
Analyzer and the older J6841A Network Analyzer Software. The existing license key will
be required if upgrading J6841A software to J6840A.
J7323A
Ericsson Iub Vendor Decode
Qty__
Includes:
Network Analyzer Software CD media
Single-use license key for Ericsson Iub Vendor Decode
(which is included on Network Analyzer Software and Signaling
Analyzer Software edition CD media)
Documentation
Note: This Ericsson Iub Vendor Decode license key activates functionality present on the
version of Network Analyzer and Signaling Analyzer Software supplied or later. This
software can be used to upgrade the software present on the Network Analyzer and
11
Distributed Network Analyzer MX the software supplied with the Distributed Network
Analyzer and the older J6841A Network Analyzer Software. The existing license key will
be required if upgrading J6841A software to J6840A.
J6848A
Report Center
Qty__
includes:
Network Analyzer Software CD media
Single-use license key for Report Center (which is included on
Network Analyzer Software CD media)
Documentation
Data Wireline Report Center (for standard Network Analyzer
reporting)
Telephony Report Center (for Telephony Network Analyzer and
VQT reporting)
J6848A-001
J6848A-002
Note: Must order Option 001 or 002
J6848A - ABA
Add US English localization of manual and Network
Analyzer Software CD media
Add Japanese localization of manual and Network
Analyzer Software CD media
J6848A - ABJ
Note: Must order Option ABA or ABJ
Note: This software is standalone and does not require the presence of other Agilent
software on the PC (though can co-exist with other software, of course)
J6849A
J6849A - 001
One-time Software Upgrade
Upgrade from Agilent SW Edition to J6840A
Network Analyzer Software
– US English version
Qty__
includes:
Network Analyzer Software CD media
Single-use license key
Documentation
Requires the existing J1955A SW Edition to be present on the PC before upgrade is
possible
J6849A - 003
Upgrade from J6843A Telephony Network Analyzer
to J6844A Telephony Network Analyzer with MOS software
– US English version
includes:
Network Analyzer Software CD media
Single-use license key
Documentation
Requires the existing J6843A Telephony Network Analyzer to be present on the PC before
upgrade is possible
12
Accessories
J1990A
LAN Analyzer Tap
For use with the J6805A Distributed Network Analyzer ME.
Qty__
This accessory provides the means to monitor an in-service 10/100 Mb/s Ethernet
connection unintrusively.
J2928A
Pair of 10 dB Optical Attenuators (SC connectors) Qty__
For use with the J6811A LIM. Note: a pair is included with each J6811A LIM.
This accessory provides replacement attenuators should the originals be lost.
J2929A
Multi-mode Optical splitter
(SC connectors) for use with J6811A LIM
Qty__
J5491A
Pair of SX GBIC Modules
Qty__
For use with the J6832A LIM. Note: a pair is included with each J6832A LIM. This
accessory provides replacements should the originals be lost.
J5492A
Pair of LX GBIC Modules
For use with the J6832A LIM.
Qty__
J5493A
SX Optical Splitter (50/50 split ratio)
For use with the J6832A LIM.
Qty__
J5494A
LX Optical Splitter (50/50 split ratio)
For use with the J6832A LIM.
Qty__
J5495A
Copper GBIC Module (one only)
For use with the J6832A LIM.
Qty__
J6750A
Alternative Hard Disk Drive Assembly
For use with the J6800A Network Analyzer.
Qty__
This accessory comes pre-loaded with the operating system and the current version of Network
Analyzer Software. The drive can be swapped with the J6800A HDD for security reasons.
The use model for this accessory is as follows: the analyzer is moved between high-security
locations leaving a J6750A HDD secured at each of these locations. In this way, no
security risk occurs when the analyzer is moved as all sensitive data stays with the HDD.
J6751A
Alternative Hard Disk Drive Assembly
For use with the J6802A Distributed Network Analyzer MX.
Qty__
This accessory comes pre-loaded with the operating system and the current version of
Network Analyzer Software. The drive can be swapped with the J6802A HDD for security
reasons.
The use model for this accessory is similar to that for the J6750A accessory. Note that the
J6750A and the J6751A differ not only in the software loaded on each but also
physically; they are not interchangeable.
J6753A
Additional Combo 56K Modem
Qty__
10/100BaseTX Network Interface Card
This accessory can be used as a measurement interface for use with Network Analyzer
Software.
One instance of this network interface card is included with the J6800A Network
Analyzer when it ships. This accessory should therefore only be ordered if the customer
13
wishes to use Network Analyzer Software when the included card is already in use for
remote control purposes. This NIC can also be used in the second PC card slot in the
Distributed Network Analyzer MX for use as an Ethernet measurement interface.
J6757A
V-Series Monitor/Simulate cables for the
J6820A V-Series LIM
At least one of these cable options is required for the J6820A LIM.
Option 001
Option 002
Option 003
Option 004
Option 005
Qty__
V.35 Cable
RS-449/V.36 Cable
V.11/X.21 Cable
RS-232C Cable
EIA-530 Cable
Note: Must order J6757A plus option(s)
Note: As these cables can be permanently installed in-line with the customer circuit, even
when an analyzer (or LIM) is not present, the customer may wish to order multiple
instances of the same cable, that is, more cables than J6820A LIMs.
The first three options may also be used with the Agilent Advisor High Speed V-Series
plug-in module (J5457A).
J6761A
Wheeled Deluxe Case for the J6800A
Qty__
This is a custom made light-weight trolley case with telescopic handle and designed to
carry the J6800A Network Analyzer plus accessories (including a pair of LIMs).
This case is not suitable for use as a checked bag for air travel.
J6762A
Wheeled Transit Case for the J6800A
Qty__
This is a custom made hard trolley case with a telescopic handle designed to carry the
J6800A Network Analyzer plus accessories (including a pair of LIMs).
This case is suitable for use as a checked bag for air travel.
J6763A
Transit Case for the J6801A or J6805A
Qty__
This is a custom made hard case designed to carry the Distributed Network Analyzer ME
or Distributed Network Analyzer plus accessories (including a pair of LIMs).
This case is suitable for use as a checked bag for air travel.
J6764A
Wheeled Transit Case for the J6802A
Qty__
This is a custom made trolley case with telescopic handle and designed to carry the
J6802A Distributed Network Analyzer MX plus accessories (including a pair of LIMs).
This case is suitable for use as a checked bag for air travel.
J6771A
Rack Mount Kit for the J6801A
This is the rack mount kit for the Distributed Network Analyzer
Qty__
J6775A
Rack Mount Kit for the J6805A
This is the rack mount kit for the Distributed Network Analyzer ME
Qty__
14
Related Literature
J6826A
Eight-port T1/E1 Balanced Monitor Tap
This is an eight-port T1/E1 passive monitor tap with RJ48 network
connectors to provide non-intrusive in-line access to a network for the
J6824A Eight-port T1/E1 LIM.
Qty__
J6827A
Eight-port E1 BNC Monitor Tap
This is an eight-port E1 passive monitor tap with BNC network connectors
to provide non-intrusive in-line access to a network for the J6824A
Eight-port T1/E1 LIM.
Qty__
Agilent Network Analyzer Family
Agilent Network Analyzer Family
Network Troubleshooting Center
Report Center
Telephony Network Analyzer
Voice Quality Tester
3G UMTS/W-CDMA Test Software
SAN Network Analyzer
Data Sheet
Technical Overview
Technical Overview
Technical Overview
Technical Overview
Technical Overview
Data Sheet
Data Sheet
5988-4176EN
5988-4231EN
5988-8548EN
5988-4165EN
5988-7901EN
5968-7723EN
5988-7000EN
5988-7001EN
Microsoft Windows® is a U.S. registered trademark of Microsoft Corp.
Agilent AdvantageTM is a U.S. trademark of Agilent Technologies Inc.
www.agilent.com
15
www.agilent.com
Online assistance: www.agilent.com/find/assist
By internet, phone or fax, get assistance with
all your test and measurement needs.
Argentina
Australia
Austria
Belgium
Brazil
Canada-English
Canada-French
China
Denmark
Finland
France
Germany
Hong Kong
India
Ireland
Israel
Italy
Japan
Luxemborg
Malaysia
Mexico
Netherlands
Norway
Philippines
Poland
Russia
Singapore
South Korea
Spain
Sweden
Switzerland-German
Switzerland-Italy
Switzerland-French
Taiwan
Thailand
United Kingdom
USA
+54 11 5811 7115
1 800 629 485
+43 (01) 25 125 7006
+32 (0) 2 404 9340
+55 11 4197 3600
877 894 4414
877 894 4414
800 810 0189
+45 70 13 15 15
+358 (0) 10 855 2100
+33 (0) 825 010 700
+49 (0) 18 05 24 63 33
800 930 871
1600 112 929
+353 1890 924 204
+972 3 6892 500
+39 02 92 60 8484
0120 421 345
+32 (0) 2 404 9340
1800 888 848
+52 01800 506 4800
+31 (0) 20 5472111
+47 23 25 3720
1800 1651 0170
+48 22 723 0066
+7 095 797 3963
1800 375 8100
080 769 0800
+34 91 631 3300
0200 88 22 55
+41 (0) 1 735 9300
+39 (0) 2 92 60 8484
+33 (0) 825 010 700
0800 047 866
1800 226 008
+44 (0) 7004 666666
800 452 4844
Product specifications and descriptions in this
document are subject to change without notice.
© Agilent Technologies, Inc. 2000-2002
Printed in U.S.A. March 31, 2004
*5988-4248EN*
5988-4248EN
Together with Agilent, gain the extreme productivity
improvements that your business demands!
www.agilent.com/comms/networkanalyzer
Download PDF

advertising