NEC R320a-E4 Server Configuration Guide

Below you will find brief information for NEC EXPRESS5800/R320a-E4. This document serves as a comprehensive guide for configuring your NEC EXPRESS5800/R320a-E4 server. It provides detailed product and configuration information, covering aspects such as processor options, memory installation, internal hard disk drive configurations, optical drives, PCI card compatibility, and other add-in and add-on components, ensuring fast and proper system setup.

PDF
Document
NEC R320a-E4 Configuration Guide | AI Chat & PDF Download | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Fault tolerant technology based on GeminiArchitecture

  • Full manageability by integrated EXPRESSSCOPE Engine 2

  • Supports Intel Xeon processor E5504 (1 or 2 logical processors)

  • Up to 96GB of high speed DDR3-1333 memory

  • Maximum internal storage of 4.8 TB with hot plug 2.5-inch SAS HDDs

  • Supports RAID 1 configuration for SAS drives

  • Includes DVD Super Multi drive

  • Features 2 PCIe 1.0 x4 expansion slots

  • Integrated Server Management Controller with 32MB VRAM

  • Multiple interfaces including VGA, USB, and 1000BASE-T LAN

Frequently asked questions

The maximum internal storage capacity is 4.8 TB (8 x 600GB).

The NEC EXPRESS5800/R320a-E4 VMware model supports VMware vSphere 5 and VMware vSphere 5 Update 1.

No, VMware vSphere 5 Update 2 is not supported on NEC Express5800/ft series at the moment.

The server uses DDR3-1333 ECC Registered DIMM memory.

The server supports 1 or 2 logical processors.

The dimensions are 483.0 x 736.0 x 178 mm (19.0 x 29.0 x 7.0 in) for a 4U rack mount.

Preparing document for printing…
0%