AirKing 4C630N/9012N, 4C631P/9016P wall mounted oscillating fans Operating instructions & parts manual

Below you will find brief information for wall mounted oscillating fans 4C630N/9012N, wall mounted oscillating fans 4C631P/9016P. The 4C630N/9012N and 4C631P/9016P models are both wall mounted, oscillating fans with 3 speed settings. You can control the speed using the pull cord switch. This fan also has an oscillating feature that is controlled by a knob located on the rear of the motor. The fan can be adjusted up or down to achieve the desired vertical angle while in use.

PDF Download
Document
AirKing Wall Mounted Oscillating Fans 4C630N/9012N, 4C631P/9016P - Operating Instructions & Parts Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Wall mounted
  • Oscillating
  • 3 speed settings
  • Pull cord speed control
  • Variable oscillation
  • Permanent split capacitor motor
  • OSHA-complying front steel mesh grill
  • 6 ft (1.8m) 18/3 cord set

Frequently asked questions

The grounding prong is a safety feature that helps to reduce the risk of electric shock. It provides a path for electricity to flow to the ground in case of a fault, preventing the user from being shocked.

If the fan does not function properly, it may be due to the safety device incorporated in the plug. Return it to an authorized service center or call 800-233-0268, Monday - Friday between 8:30 am and 4:00 pm EST. If the plug warning label is missing or damaged, call the toll-free number for a replacement label.

While it is possible to use an extension cord, it is recommended to avoid using them whenever possible. If you must use an extension cord, make sure it is UL listed and minimize the risk of overheating by ensuring that you are not using a single extension cord to operate more than one fan.
Preparing document for printing…
0%