Aiwa TV-S2700 CRT Television User Manual

LCD TELEVISION
AVC (Audio Video Control Center) & LCD Display Monitor
Operating Guide for 32HDL51
IMPORTANT SAFETY INSTRUCTIONS ................................................................................ 2-3
FIRST TIME USE .................................................................................................................. 4-26
THE REMOTE CONTROL .................................................................................................. 27-49
ON-SCREEN DISPLAY........................................................................................................ 50-77
USING THE RGB INPUT OF THE LCD TV ........................................................................ 78-87
CARE OF YOUR HITACHI LCD TV & REMOTE CONTROL .................................................. 88
RECEPTION PROBLEMS ........................................................................................................ 89
USEFUL INFORMATION/INDEX ........................................................................................ 90-98
As an ENERGY STAR® Partner, Hitachi, Ltd. has determined that this
product meets the ENERGY STAR® guidelines for energy efficiency.
IMPORTANT SAFETY INSTRUCTIONS
SAFETY POINTS YOU SHOULD KNOW ABOUT
YOUR HITACHI LCD TELEVISION
Our reputation has been built on the quality, performance, and ease of service of HITACHI LCD televisions.
Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this
section illustrates safety tips which will be of benefit to you. Please read it carefully and apply the knowledge you
obtain from it to the proper operation of your HITACHI LCD television.
Please fill out your warranty card and mail it to HITACHI. This will enable HITACHI to notify you promptly in the
improbable event that a safety problem should be discovered in your product model.
Follow all warnings and instructions marked on this LCD television. LCD television consists of AVC center and display Monitor.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of a
sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
CAUTION
WARNING: • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
• THE LCD TELEVISION SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THE TELEVISION.
NOTE:
• There are no user serviceable parts inside the AVC center/display monitor.
• Model and serial numbers are indicated on back side of the AVC center/display monitor.
CAUTION: Adjust only those controls that are covered in the instructions, as improper changes or modifications not
expressly approved by HITACHI could void the user’s authority to operate the television.
MODIFICATIONS:
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by Hitachi America, Ltd. Home Electronics Division may void the user’s
authority to operate the equipment.
POWER SOURCE
THIS TELEVISION IS DESIGNED TO OPERATE ON 120 VOLTS 60Hz, AC CURRENT. INSERT THE
POWER CORD INTO A 120 VOLT 60Hz OUTLET.
TO PREVENT ELECTRIC SHOCK, DO NOT USE THE TELEVISION’S (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES AND GROUND
TERMINAL CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NEVER CONNECT THE TELEVISION TO 50Hz, DIRECT CURRENT, OR ANYTHING OTHER THAN THE
SPECIFIED VOLTAGE.
NOTE:
This television receiver will display television closed captioning, (
paragraph 15.119 of the FCC rules.
or
), in accordance with
CAUTION: Never remove the back cover of the AVC center/display monitor as this can expose you to very high
voltages and other hazards. If the television does not operate properly, unplug the LCD television and call
your authorized dealer or service center.
2
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
Follow all warnings and instructions marked on this television.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use the attachments/accessories specified by the
manufacturer.
12.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Televisions are designed to comply with the recommended
safety standards for tilt and stability.
Do not apply excessive pulling force to the front, or top, of the
cabinet which could cause the product to overturn resulting
in product damage and/or personal injury.
16. Follow instructions for wall, shelf or ceiling mounting as
recommended by the manufacturer.
17. An outdoor antenna should not be located in the vicinity of
overhead power lines or other electrical circuits.
18. If an outside antenna is connected to the receiver be sure the
antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding for the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes and requirements for the
grounding electrode.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUNDING CONDUCTORS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC NATIONAL ELECTRICAL CODE
Note to the CATV system installer: This reminder is provided
to call the CATV system installer’s attention to Article 820-40
of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close
to the point of cable entry as practical.
Do not place any objects on the top of the television which may fall or cause a child to climb to retrieve the objects.
•
This product contains lead and lamps that contains mercury. Dispose of this product and its lamps in accordance
with applicable environmental laws. For lamp recycling and disposal information, go to www.lamprecycle.org. For
product recycling and disposal information, contact your local government agency or the Electronic Industries
Alliance at www.eiae.org (in the US) or the Electronic Product Stewardship Canada at www.epsc.ca (in Canada). For
more information, call “1-800-HITACHI.”
PUBLIC VIEWING OF COPYRIGHTED MATERIAL
Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require
prior authorization from the broadcaster or owner of the video program material.
• This digital television is capable of receiving analog basic, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming. A CableCARD provided by your cable operator is required to view encrypted
digital programming. Certain advanced and interactive digital cable services such as video-on-demand, a cable operator’s enhanced
program guide and data-enhanced television services may require the use of a set-top box. For more information call your local cable
company.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited consumer uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
3
ACCESSORIES
Check to make sure you have the following accessories before disposing of the packing material.
BATTERIES
FIRST TIME USE
REMOTE
CONTROL
POWER CORD (2)
AVC and MONITOR
2.
MONITOR
CONNECTION CABLE
3.
Subwoofer Cable
IR MOUSE
CABLE (2)
4.
5.
Cleaning Cloth
6.
7.
1.
CAUTION: 1. Ceiling mounting is not recommended. Mounting the panel on the ceiling does not provide adequate
ventilation for the electronics or proper support for the front glass panel.
1. Remote Control Unit CLU-3841WL (P# HL02061)
or CLU-3843WL (P# HL02063).
2. Two “AA” size, 1.5V batteries (P# FQ00021).
3. Power Cord:
32”
LCD Monitor
AVC
6. Sub Woofer Cable (P# VZ11701).
7. Cleaning Cloth (P# MS00931).
EV01841
EV01841
4. Monitor Connection Cable (P# EW07883).
5. Two IR Mouse cables (P# EY01641).
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the
cover off.
BOTTOM VIEW
(Remote Control)
2. Insert two new “AA” size batteries for the remote control. When replacing
old batteries, push them towards the springs and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4. Replace the cover.
Press down and slide back
to remove.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
4
HOW TO SETUP YOUR NEW HITACHI LCD TELEVISION
To take measures to prevent the LCD Display from tipping over and prevent possible injury it is important to mount the unit
in a stable place.
Wood screw
two places
32”
Securing to a wall
1. Keep the LCD Display monitor four inches away from the wall except those hung to a wall mount bracket.
2. Secure the monitor to the wall as shown below.
10cm (4 inches) or more
Stabilization bolts
(Provided)
Wood Screw
Wire
String or Wire
NOTES:
32”
1. Do not block the ventilation holes of the LCD Display monitor or the AVC center. Blocking the ventilation holes might cause fire
or defect.
2. The LCD television has two AC cords, one on the AVC center and the other on the LCD Display monitor. In case of an
abnormal symptom, unplug both AC cords.
Caution when moving the main unit
As this product is heavy, whenever it is moved, two people are required to transport it safely. Whenever the unit is moved it should be
lifted forward using the top and bottom frame on both sides of the 32” for stability, as shown below.
Handgrips
32”
ANTENNA
Unless your LCD Television is connected to a cable TV system or to a centralized
antenna system, a good outdoor color TV antenna is recommended for best performance. However, if you are located in an exceptionally
good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient.
LOCATION
Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. Also, be sure that the location
selected allows a free flow of air to and from the perforated back cover of the set.
To avoid cabinet warping, cabinet color changes, and increased chance of set failure, do not place the TV where temperatures can
become excessively hot, for example, in direct sunlight or near a heating appliance, etc.
When installing your LCD TV against a wall, keep it at least 10 cm (4 inches) from the wall.
5
FIRST TIME USE
Securing to a table-top
1. Using wood screws (two) fasten the set to the clamping screw holes on the rear of the LCD Display stand as shown below.
2. Using commercially available wood screws, secure the set firmly in position.
3. Leave some space around the unit for proper operation of the power swivel stand.
FIRST TIME USE
HOW TO SET UP YOUR NEW HITACHI LCD TELEVISION
VIEWING
The major benefit of the HITACHI LCD Television is its large viewing screen. To see this large
screen at its best, test various locations in the room to find the optimum spot for viewing.
The best picture is seen by sitting directly in front of the TV and about 8 to 18 feet from the
screen.
During daylight hours, reflections from outside light may appear on the screen. If so, drapes
or screens can be used to reduce the reflection or the TV can be located in a different section
of the room.
If the TV’s audio output will be connected to a Hi-Fi system’s external speakers, the best
audio performance will be obtained by placing the speakers equidistant from each side of the
receiver cabinet and as close as possible to the height of the picture screen center. For best
stereo separation, place the external speakers at least four feet from the side of the TV, place
the surround speakers to the side or behind the viewing area. Differences in room sizes and
acoustical environments will require some experimentation with speaker placement for best
performance.
BEST
VERTICAL VIEWING
ANGLE
20
3'
0'
5'
10'
15'
R
S
4" Minimum
50
5'
4" Minimum
20'
BEST
HORIZONTAL
10'
50
15'
20'
VIEWING ANGLE
L
S
IMPORTANT NOTES
No. Items
1
Arching sound from
LCD display monitor’s
panel.
Notes
A buzzing sound might be heard when the LCD display monitor is turned on in a very quiet
room. This is due to the LCD panel drive circuit when it is functioning. This arching sound
is normal and it is not a malfunction.
Some infrared rays are emitted from the LCD display monitor’s panel that might affect other
infrared controlling equipment.
2
Interference for infrared
equipment.
3
Picture Image (Spectrum) When receving still picture signals, (e.g. channel number indication or clock indication) for a
while, you can see image-like when the picture varied. This is not a defect.
4
LCD Surface
The LCD panel is made from glass. Heavy shock on the front panel might damage it.
5
Transportation
When the LCD monitor is transported horizontally, the glass panel has the possibility of being
broken or increasing the picture defects. At the time of transportation, horizontal style is
prohibited. More-over, please treat the LCD panel with great care because of a precision
apparatus. Please instruct transporters so that it should be put into the packing box at the time
of shipment.(There is a possibility that breakage of the panel or defects will increase.)
Rough transportation might cause damage to the panel and pixel failure.
6
Granular spots
When a screen is seen at point-blank range, a random fine grain may be visible to a dark part.
7
Black dots and
Bright Points
Black dots and Bright points may appear on the LCD screen. This is a structural property of
the LCD panel and is not a defect.
8
Disturbance to video
apparatus
If an apparatus (VCR, etc.) antenna line is arranged near the monitor, the image may shake,
or disturbance may be received.
9
Lip Sync
There is some time lag betweeen the picture and the sound. You can see lip motion that is
delayed compared to the sound.
10
Caution on prolonged
storage
Storing the LCD television for a period of more than 2 to 3 months without use might cause
an unstable picture when the set is turned on.
11
Operating
Operating altitude: 800 to 1,114hPa (6,194ft to -2,484ft). Operating temperature: 41˚F to 95˚F.
Avoid operating the LCD TV below 41˚F LCD response speed may slow down when operating
at these temperatures. This is a normal operating characteristic of the LCD monitor.
12
Storage
Storage Altitude: 300 to 1,114hPa (31,912ft to -2,484ft). Storage temperature: 5˚F to 140˚F.
13
Power ON or OFF
Frequent use of the Power ON or OFF might trigger the power protection circuit. If the TV
does not turn ON, please wait a little before turning ON again.
6
HOOKUP CABLES
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors.
For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.
Phono Connector
Used on all standard video and audio cables which
connect to inputs and outputs located on the rear jack
panel and front control panel.
AUDIO OUT
3.8mm
STEREO
MINI-PLUG
S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laserdisc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.
2
RCA TYPE
PLUGS
Stereo Cable (3.5 mm plug to 3.5 mm plug)
This cable is used to connect from external audio out to
the audio input of the AVC Center (ex. RGB Input).
5
10
15
4
14
9
8
2
12
7
1
11
6
D-SUB MINI 15-Pin Cable
This cable is used to connect a computer output to the
ANALOG input located on the rear panel of the AVC
Center. The resolution should be set correctly to display
the signal on the LCD Television.
IR Mouse Cable (Provided)
Connect the IR Mouse to the IR output on your AVC
center when A/V Network is used. You must place the
IR mouse in front of the corresponding IR window of
your cable box and VCR. This connection allows your
TV to control your cable box and VCR.
Subwoofer Cable (Provided)
This cable is used to connect an external audio
component input to the subwoofer output of the Display
Monitor.
Monitor Connection Cable (Provided)
This cable is used to connect the Display Monitor to the
AVC Center.
1
6
2
7
3
8
4
9
5
D-SUB MINI 9-Pin Cable
This cable is used to connect to the RS232C input
located on the rear panel so you can control some of
your TV functions from an external home control
system.
Optical Cable
This cable is used to connect to an audio amplifier with
an Optical Audio In jack. Use this cable for the best
sound quality.
HDMI Cable
This cable is used to connect your external devices such
as Set-Top-Boxes or DVD players equipped with an
HDMI output connection to the TV’s HDMI input.
IEEE1394 Cable
This cable is used to connect your digital television to
external digital devices.This cable will carry both the
video and audio information.
3
13
USB Cable
This cable is used to connect your digital camera to the
Photo Input in the front of the AVC.
7
FIRST TIME USE
“F” Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.
300-Ohm Twin Lead Connector
This outdoor antenna cable must be connected to an
antenna adapter (300-Ohm to 75-Ohm).
FIRST TIME USE
ANTENNA CONNECTIONS TO REAR PANEL JACKS
VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system, connect the outdoor
antenna or CATV coaxial cable to the ANT A (75-Ohm) terminal. If you
have a second antenna, connect the coaxial cable to the ANT B
terminal.
ANT A
ANT B
To outdoor antenna
or CATV cable
To second antenna
VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect
the VHF or UHF antenna leads to screws of the VHF or UHF adapter.
Plug the adapter into the antenna terminal on the TV.
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal,
and connect the cables to the antenna mixer. Consult your dealer or
service store for the antenna mixer.
ANT B
To UHF
antenna
ANT A
Antenna Mixer
8
To outdoor VHF
or UHF antenna
To outdoor antenna
or CATV system
FRONT PANEL CONTROLS
FRONT VIEW
32”
DISPLAY
MONITOR
FIRST TIME USE
STANDBY (RED) ON (GREEN)
MAIN POWER
hf
g
k h
PULL
(AVC)
AUDIO VIDEO
CONTROL
CENTER
AUDIO VIDEO CONTROL CENTER
POWER
f
STANDBY (RED) ON (GREEN)
g
VOL-
VOL+
e
CH-
CH+ INPUT/EXIT
d
c
PHOTO INPUT
MENU/SELECT
INPUT 5
PHONES
S-VIDEO
b
a
j
VIDEO
L/(MONO)
AUDIO
R
i
a MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This
button also serves as the SELECT button when in MENU mode.
b PHOTO INPUT
Insert USB cable from your Digital Camera to view your digital still pictures (see pages 33-35).
c INPUT/EXIT button
Press this button to select the desired input, VIDEO 1 to 5, RGB, IEEE 1394, Photo Input or Ant A/B source. Your selection is shown
in the top right corner of the screen. This button also serves as the EXIT button when in MENU mode.
d CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as
the cursor down (H) and up (G) buttons when in MENU mode.
e VOLUME level
Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as
the cursor left (F) and right (E) buttons when in MENU mode.
9
FRONT PANEL CONTROLS
FIRST TIME USE
f POWER button
Display Monitor “MAIN POWER” button
This power button is for the complete system, and must be turned ON/OFF manually. It is recommended to leave the “MAIN
POWER” to ON condition (lights red) for stand-by mode.
or
STANDBY (RED) ON (GREEN)
MAIN POWER
32”
AVC POWER button
The AVC power can be turned ON/OFF manually or by remote control. Turning on the AVC Power will only turn on the AVC box if
the “MAIN POWER” of the display monitor is off.
g POWER light indicator
To turn the monitor ON, press the main power switch located on the lower right side of the monitor. A red stand-by indicator lamp
located on the lower right corner of the front bezel will illuminate. The LCD TV is now ready for remote on/off operation.
Indicating Lamp
Off
Power Status
Off
Lights Red
Off
(Stand-by)
On
Lights Green
Lights Orange
Off
(Power Saving)
Operating
When the main power switch is set
OFF.
When the main power switch on the display
monitor is ON, and the AVC Center is OFF.
Display monitor MAIN POWER is ON and
AVC Center power is ON.
Display monitor MAIN POWER is ON and
and AVC Center power is ON, with no signal
input except antenna (no sync. signal).
h REMOTE CONTROL sensor
Point your remote at this area when selecting channels, adjusting volume, etc.
i FRONT INPUT JACKS (for VIDEO: 5)
Use these audio/video jacks for a quick hook-up from a camcorder or VCR to instantly view your favorite show or new recording.
Press the INPUTS button then use the CURSOR PAD and the SELECT button on the remote control to select INPUT 5. VIDEO: 5
appears in the top right corner of the TV screen. If you have mono sound, insert the audio cable into the left audio jack.
j PHONES JACK
Use this jack for your head-phones. The TV’s internal speakers can also be heard. Turn off the internal speakers (see page 57) if
you wish to listen to the head-phones only.
k LEARNING AV NET Sensor
Point your equipment’s remote control at this area while using the AV NET Learning Wizard.
NOTES: 1.
Your HITACHI LCD TV will appear to be turned OFF (lights orange) if there is no video input when VIDEO: 1, 2, 3,
4, 5, or RGB is selected. Check the Power Light to make sure the Display Monitor is turned off or in Stand-by
mode (lights red) when not in use.
2. Remote Control can not turn ON/OFF the “MAIN POWER” of the display monitor.
10
REAR PANEL JACKS
32” Monitor Bottom View
s
q
d
c
b
g
k
l
i
j
h
f
a Antenna Input
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can
be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture (ANT B cannot be displayed as a
sub-picture).
b Audio/Video Inputs 1, 2, 3 and 4
By using the INPUTS button, the CURSOR PAD, and the SELECT button of the remote control, you can select each video source.
Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (if you
have mono sound, insert the audio cable into the left audio jack).
c MONITOR OUT
These jacks provide fixed audio and video signals (ANT A/B, INPUT 1~5) which are used for recording. Use the S-VIDEO Output
for high quality video output. Component signal to Input 1 and 2, RGB and HDMI inputs will not have monitor output.
d Optical Out (Digital Audio)
This jack provides Digital Audio Output for your audio device that is Dolby® Digital and PCM compatible, such as an audio amplifier.
e S-VIDEO Inputs 3 and 4
Inputs 3 and 4 provide S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.
NOTES:
1. You may use VIDEO or S-VIDEO inputs to connect to INPUT 3 and 4, but only one of these inputs may be used at a
time.
2. S-VIDEO output may be used for recording, only when the input is of S-VIDEO type.
f Component: Y-PBPR Inputs
Inputs 1 and 2 provide Y-PBPR jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may
use composite video signal for INPUTS 1 and 2.
NOTES:
1. DO NOT connect composite VIDEO and S-VIDEO to Input 3, 4 or 5 at the same time. S-Video has a higher priority
over video input.
2. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the AVC
Box’s PB input and the components R-Y output to the AVC Box’s PR input.
3. Your component outputs may be labeled Y-CBCR. In this case, connect the component CB output to the AVC Box’s
PB input and the component CR output to the AVC Box’s PR input.
4. It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs (See page 54).
5. To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPR jacks, RGB
and HDMI inputs.
11
FIRST TIME USE
Audio Video Control Center (AVC)
a
e
m
REAR PANEL JACKS
g RGB - Analog Input
Use this 15-pin D-Sub input for your external devices with RGB output (see page 25).
FIRST TIME USE
h RGB - Audio Input
Connect audio for RGB input (if you have mono sound, insert the audio cable into the left audio jack).
i HDMI - Digital Input (INPUT 1 and INPUT 2)
About HDMI
HDMI is the next-generation all digital interface for consumer electronics. HDMI enables the secure distribution of uncompressed
high-definition video and multi-channel audio in a single cable. Because digital television (DTV) signals remain in digital format,
HDMI assures that pristine high-definition images retain the highest video quality from the source all the way to your television
screen.
Use the HDMI input for your external devices such as Set-Top-Boxes or DVD players equipped with an HDMI output connection.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
NOTES:
1. The HDMI input is not intended for use with personal computers.
2. Only DTV formats such as 1080i, 720p, 480i and 480p are available for HDMI input.
j To Monitor
Connect the Monitor Connection Cable to the AVC center’s “TO MONITOR” connector, and to the display monitor’s “FROM AVC”
connector.
k IR Blaster
This jack provides IR output to your external components (VCR, Cable box, DVD player, etc.). With this connection, your external
components can automatically be controlled by the A/V network feature. This connection will allow you to control the external
components with your LCD Television’s remote control in TV mode.
l RS232C Input
For use with third party home Audio/Video control systems which are commercially available. Please see your dealer regarding
these “non Hitachi” home control systems (see page 76 to activate this input).
m IEEE1394
These jacks provide a digital interface for your external digital devices, such as a Digital VCR (D-VHS or Set-Top-Box) by means
of a single cable (see page 20). When using IEEE1394 connections, you enable video and audio digital data exchange between
a compatible device. This connection also enables you to control basic equipment functions (such as VCR play, rewind, fast
forward, stop, etc.) from your TV On-Screen Display.
n Subwoofer Out
Connect this SUB WOOFER OUT output to the external audio component input using the sub woofer cable provided.
Ferrite Core
Sub-woofer cable (RCA Type)
o To AVC
Connect the Monitor Connection cable from the AVC center’s “TO MONITOR” to these connectors (“FROM AVC”).
p SUB-POWER button
This power is for serviceman usage.
q Upgrade Card
This card slot is for future software upgrades. Hitachi will notify you if a software upgrade is required for your TV. In order to receive
written notification, please complete and return your warranty card.
r To Power Swivel Connector
Connects to the Power Swivel Table Top Stand.
12
REAR PANEL JACKS
s CableCARD Slot
Connect a coaxial cable to ANT A terminal of the Rear Panel Jacks.
Insert the CableCARD into the slot (Top of card should be facing up as shown).
Digital Cable
Ca
C
ble
AR
IN
T
RT
SE
HIS
EN
D
D
Rear Panel of AVC
If the CableCARD is properly installed or not installed, the TV will display the following respective screens.
CableCARD is installed
OR
CableCARD
is not installed
After the CableCARD is installed, wait until the second screen below appears. The third screen below will appear if a channel is not
authorized for viewing. Press the EXIT button to exit the second screen.
In order to start cable service
for this device, please contact
your cable provider
Acquiring Data.
Please wait.
CableCARD(tm):
123-456-789-1
Host:
123-456-789-1
Data:
123-456-789-1
UnitAddress:
123-456-789-1
Not an Authorized Channel
Press EXIT to return
Please take note of all information on the screen (you will provide this information to your cable operator). Call your cable operator
and give them the information from the card to start your cable service.
NOTES:
1.
2.
3.
4.
A digital cable subscription is required.
Antenna B will not be available when CableCARD is inserted.
Do not insert a PCMCIA card into the CableCARD slot.
Please see pages 63-64 and 76 for additional CableCARD information.
13
FIRST TIME USE
This slot is for the CableCARD that will be provided by your local cable operator to gain access to chosen cable channels. The
CableCARD will allow you to tune digital and high definition cable channels. Please call your local cable operator if this service is
available before requesting a CableCARD (also known as Point of Deployment (POD) module).
CONNECTING LCD DISPLAY MONITOR TO AVC BOX
From the owner’s accessory you will find the Monitor Connector cable.
Firmly, and securely insert the Monitor Connection Cable to the rear panel of the AVC box “TO MONITOR” connectors.
Insert the other ends of the Monitor Connection Cable to the display monitor rear panel “FROM AVC” connectors.
FIRST TIME USE
1.
2.
3.
Back of Display Monitor
32∫
Core
To AC
outlet
Please use HITACHI specified cable.
TO MONITOR
AC IN
Back of AVC Center
To AC
outlet
NOTE:
The Display Monitor and the AVC Center have their own AC Power. Both AC cords must be completely plugged in to
the AVC Center and the display monitor, then plug them in to the AC outlets.
CONNECTING EXTERNAL VIDEO SOURCES
The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following
examples:
Front panel of AVC
S-VIDEO
NOTES:
Front panel of AVC
INPUT 5
PHONES
AUDIO
VIDEO
L/(MONO)
INPUT 5
PHONES
R
S-VIDEO
AUDIO
VIDEO
L/(MONO)
R
1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture
may be abnormal.
2. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
3. If you have a mono VCR, insert the audio cable into the left audio jack of your AVC box.
4. S-VIDEO input takes priority over VIDEO input.
5. If you have a VHS or 8mm camcorder, use the S-VIDEO cable in place of the VIDEO cable.
14
CONNECTING EXTERNAL VIDEO SOURCES
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your LCD TV
is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video
and audio inputs and outputs.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the INPUTS menu. Use the
CURSOR PAD to select the Antenna or Input of your choice. Then press the SELECT button to confirm your choice (see page 33).
Photo Input
Ant B
Ant A
Input 1
Input 2
Move
SEL
Sel.
CONNECTING A MONAURAL AUDIO SOURCE TO INPUT1~INPUT5
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the AVC
Center below.
2.
Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack.
3.
Press the INPUTS button, then select INPUT 3 from the INPUTS menu to view the program from the VCR or the laserdisc player.
The VIDEO label disappears automatically after approximately four seconds.
4.
Select Ant A or B from the INPUTS menu to return to the previous channel.
Back of VCR
AUDIO OUT VIDEO OUT
VCR
15
FIRST TIME USE
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your
particular assortment of components and features. For best performance, video and audio cables should be made from coaxial
shielded wire.
CONNECTING EXTERNAL VIDEO SOURCES
FIRST TIME USE
CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the AVC
Center below.
2.
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.
Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.
Press the INPUTS button, then select INPUT 3 from the INPUTS menu to view the program from the VCR or laserdisc player.
The VIDEO label disappears automatically after approximately four seconds.
5.
Select ANT A or B from the INPUTS menu to return to the previous channel.
R
L
OUTPUT
V
Back of
VCR
VCR
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 4 in example on page 25). Refer to your VCR operating guide for more information on line input-output
connections.
16
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING S-VIDEO VCR OR LASERDISC PLAYER
1.
Connect the cable from the S-VIDEO OUT of the S-VHS VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown
on the AVC Center below.
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.
Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.
Press the INPUTS button, then select INPUT 4 from the INPUTS menu to view the program from the VCR or laserdisc player.
The VIDEO label disappears automatically after approximately four seconds.
5.
Select ANT A or B from the INPUTS menu to return to the previous channel.
R
L
V S-VIDEO
OUTPUT
Back of VCR or
Laserdisc Player
VCR or Laserdisc Player
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 4 in example on page 25). Refer to your VCR operating guide for more information on line input-output
connections.
17
FIRST TIME USE
2.
CONNECTING EXTERNAL VIDEO SOURCES
FIRST TIME USE
CONNECTING A COMPONENT SOURCE WITH HDMI or DVI CAPABILITY TO INPUT 1 or INPUT 2
1.
Connect the HDMI or DVI to HDMI connection cable from the output of the HDTV set top box or DVD player to the HDMI
input as shown on the AVC Center below.
2.
With DVI output, connect the cable from the AUDIO OUT R of the HDTV set top box or DVD player to the INPUT (AUDIO/R)
jack.
3.
With DVI output, connect the cable from the AUDIO OUT L of the HDTV set top box or DVD player to the INPUT (AUDIO/L)
jack.
4.
Press the INPUTS button, then select INPUTS 1 or 2 to view the program from the HDTV set top box or DVD player. The VIDEO
OSD label disappears automatically after approximately four seconds.
5.
Select ANT A or B from the INPUTS menu to return to the previous channel.
HDMI input
or
HDMI
Cable
DIGITAL OUTPUT
Back of
D-VHS
D-VHS
DVI to HDMI Input
or
or
DVI to HDMI
Cable
PR
PB
DIGITAL OUTPUT
L
R
OUTPUT
Back of
D-VHS
D-VHS
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. The HDMI input on INPUT 1 or 2 contains the copy protection system called High-bandwidth Digital Content
Protection (HDCP). HDCP is a cryptographic system that encrypts video signals when using HDMI connections to
prevent illegal copying of video contents.
3. HDMI is not a “NETWORK” technology. It establishes a one-way point-to-point connection for delivery of
uncompressed video to a display.
4. The connected digital output device controls the HDMI interface so proper set-up of device user settings determines
final video appearance.
18
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO LASERDISC/DVD PLAYER OR HDTV SET TOP BOX TO INPUT 1 OR 2 COMPONENT: Y-PBPR.
Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the
AVC Center below.
2.
Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.
3.
Connect the cable from the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.
4.
Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.
5.
Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.
6.
Press the INPUTS button, then select INPUT 1 or 2 from the INPUTS menu to view the program from the Laserdisc/DVD player
or HDTV set top box. The VIDEO label disappears automatically after approximately four seconds.
7.
Select ANT A or B to return to the previous channel.
DVD Player
L
OUTPUT
R
Y
PB
PR
OR
OUTPUT
AUDIO
VIDEO
PR/CR PB/CB Y
L
R
Back of
DVD Player
HDTV Set-Top Box
NOTE:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 26 for tips on REAR PANEL CONNECTIONS.
19
FIRST TIME USE
1.
FIRST TIME USE
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A COMPONENT SOURCE WITH DIGITAL INTERFACE CAPABILITY TO IEEE1394 TERMINALS
1.
Connect the IEEE1394 cable from the output of the component with IEEE1394 capability, such as a Set-Top-Box or Digital VCR,
to the IEEE1394 input terminals shown on the AVC Center below. IEEE 1394 allows the LCD television and the external
device to communicate with one another. When using IEEE1394 connections, you enable video and audio digital data exchange
between a compatible device. This connection also enables you to control basic equipment functions (such as VCR play,
rewind, fast forward, stop, etc.) from your TV On-Screen Display.
2.
Press the INPUTS button on the Remote Control.
3.
Select the IEEE1394 option (see page 36).
IEEE1394 Cable
LINE OUT
R
(MONO)/L VIDEO
S-VIDEO
R
(MONO)/L VIDEO
S-VIDEO
1
2
DIGITAL INTERFACE
IEEE1394
Digital VCR (D-VHS)
NOTES:
1. This LCD TV’s IEEE1394 connection is not compatible with a DV camcorder (Digital Video camcorder) and a PC.
2. With IEEE1394 connection, video and audio will be received by the TV. It will enable you to control the D-VHS from
the TV IEEE1394 menu (see page 36).
3. The IEEE1394 interface contains the copy protection standard called 5C or Digital Transmission Content Protection
(DTCP).
4. See page 26 for tips on Rear Panel Connections.
20
CONNECTING EXTERNAL AUDIO/VIDEO DEVICES
CONNECTING EXTERNAL AUDIO AMPLIFIER
OPTICAL
INPUT
Stereo System Amplifier
The MONITOR OUT terminal outputs video and audio of ANT A/B and INPUTS 1, 2, 3, 4 and 5. It does not output component video,
HDMI or RGB.
R
L
V S-VIDEO
INPUT
VCR or other external
components
21
Optional,
See page 26
FIRST TIME USE
To monitor the audio level of the LCD TV to an external audio amplifier, connect the system as shown below. The “OPTICAL OUT”
from the AVC center is a fixed output. The Volume of the amplifier is controlled by the amplifier, not by the LCD Television. The
OPTICAL OUT terminal outputs all audio sources with Optical IN capability.
FIRST TIME USE
CONNECTING AV NETWORK
Your Hitachi LCD Television is equipped with an AV Network feature. This feature helps to control your external Audio/Video
equipment (VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Mouse connector to control your equipment using
your Hitachi LCD TV Remote Control. You can use your Hitachi remote control to control the Audio/Video equipment command
without the equipment’s remote control.
The LCD Television AVC Center has 2 IR BLASTER jacks. Each IR Mouse cable can connect up to 2 external Audio/Video
components. Therefore, you can connect the LCD Television with up to four components. Please see the following example of an
AV Network setup between your Hitachi LCD Television and external Audio/Video equipment (VCR and DVD Player).
CONNECTING EXTERNAL AUDIO/VIDEO COMPONENTS TO IR BLASTER FOR AV NETWORK
1.
Connect your external Audio/Video components to the AVC Center shown on pages 15~21.
2.
Connect the IR Mouse cable to the IR BLASTER output of the AVC Center.
3.
Place the IR mouse in front of the infrared sensor of the external components you wish to control.
Y
V
L
OUTPUT
L
R
Infrared
Sensor
Infrared
Sensor
OUTPUT
PB/CB PR/CR R
DVD Player
VCR
IR
Mouse
4.
Press the AV NET button on the remote control. Use CURSOR PAD G or H to select and highlight the Device Setup
POWER
DVD
MENU
MORE
DVD2
VCR
VCR2
AV Receiver
Move
NOTES:
INFO
1.
2.
3.
4.
Device Setting
The AVC Center has two IR BLASTER outputs which can control up to a total of four external components.
The IR Mouse must be placed in front of the external components infrared sensor for the AV Network to work.
The correct codes must be entered for each of the Audio/Video components for the AV Network to function properly.
Audio/Video component codes for AV network are on page 24.
22
AV NETWORK SETUP WIZARD
5.
Follow the steps below to setup your AV network (See page 24 for AV Network Codes).
SETUP PROCEDURE (DVD setup example below).
MENU
HOME
DVD2
1.
Press the A/V Net button on the remote control.
1.
2.
Use CURSOR PAD G, H to select Device Setup.
Press the SELECT button on the remote control.
1.
Use the CURSOR PAD G, H to choose DVD and press the SELECT
button on the remote control.
Cursor down to SETUP and press the SELECT button on the remote control.
LIST: Select to view the list of devices that are setup.
VCR
VCR2
AV Receiver
Move
Select
SEL
PV Recorder
Cable Box
Set Top Box
Custom
Device Setup
Move
Select
SEL
Please choose the device to set up.
(
(
(
(
(
(
(
)
)
)
)
)
)
)
DVD
DVD2
VCR
VCR2
AV Receiver
PV Recorder
Cable Box
BACK
Move
SETUP
( ) Set Top Box
( ) DVD3 (Custom)
( ) VCR3 (Custom)
( ) PVR2 (Custom)
( ) CBL2 (Custom)
( ) STB2 (Custom)
List
MODIFY
Select
SEL
DVD
Device Code
1.
- - - -
(Enter Code “9999” to uninstall)
Video Input
No Connection
Transmission Test
POWER
Audio Input
0-9
2.
No Connection
BACK
Move
2.
PLAY
OK
EXIT
CH UP
3.
Input
Find your DVD
4-digit manufacturers code
and enter it here
Using the remote, enter the four digit Device Code for your equipment, found on page
24.
Using the CURSOR PAD, set the Video and Audio Inputs to the INPUT to which your
device is connected.
Perform a Transmission Test by selecting Power, Play, or CH UP softkeys. If the
device responds, then it is properly set up. Select OK. (If the Transmission Test failed,
try another code.)
1.
If “OK” was selected, and the 4 digit code was invalid, the screen on the left appears,
then goes back to the device entry screen.
1.
2.
Select CONTINUE to setup another device.
Select DONE to finish and the following screen appears.
1.
Select EXIT to quit.
Congratulations!
Your DVD is now connected
to your AV network.
Would you like to set up
another device?
Done
Move
SEL
Device
DVD
DVD2
VCR
VCR2
AVR
PVR
CBL
STB
Custom
EXIT
6.
SEL
Continue
Select
Code
0490
-------------------------
Video
INPUT 2
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Audio
Using TV
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Not Setup
Select
See Remote Control AV NET button usage on pages 31 and 32.
23
FIRST TIME USE
POWER
DVD
FIRST TIME USE
AUDIO/VIDEO CODES FOR AV NETWORK
(not for remote control)
VCR BRAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . CODE
Admiral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0048, 0209
Adventura. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0000
Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0278
Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0037
Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0041
America Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0278
American High . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0035
Asha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Audiovox . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037, 0278
Beaumark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Bell & Howell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0104
Broksonic . . . . . . . . . . . . . . . . . 0121, 0184, 0002, 0209,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0479, 1479, 0278
CCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072, 0278
Calix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Canon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0035
Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0081
Cineral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0278
Citizen. . . . . . . . . . . . . . . . . . . . . . . . . 0278, 0037, 1278
Colt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072
Craig . . . . . . . . . . . . . . . . . . . . . 0037, 0072, 0047, 0240
Curtis Mathes . . . . 0035, 0041, 0060, 0162, 0760, 1035
Cybernex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Daewoo. . . . . . . . . . . . . . . . . . . . . . . . 0278, 1278, 0045
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0042
Dynatech. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
Electrohome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Electrophonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Emerex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0032
Emerson . . . . . . . . . . . . . . . . . . . . . . 0184, 0002, 0209,
. . . . . . . . . . . . . . . . . . . . . . . . . 0121, 0000, 0037, 0043
Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0104, 0047
Fuji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0033, 0035
Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
GE . . . . . . . 0035, 0060, 0240, 0760, 0807, 1035, 1060
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
Go Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0432
GoldStar . . . . . . . . . . . . . . . . . . . . . . . 0037, 0038, 1237
Gradiente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
HI-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0047
Harley Davidson . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
Harman/Kardon. . . . . . . . . . . . . . . . . . . . . . . 0038, 0081
Harwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072
Hitachi. . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0041, 0042
Hughes Network Systems . . . . . . . . . . . . . . . . . . . 0042
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0067, 0041
Jensen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0041
KEC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037, 0278
KLH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072
Kenwood. . . . . . . . . . . . . . . . . . . . . . . 0041, 0067, 0038
Kodak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0035, 0037
LXI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
Logik . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072
MEI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0035
MGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0043, 0240
MGN Technology . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
MTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0240
Magnasonic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1278
Magnavox . . . . . . . . . . . . . . . . . . . . . 0035, 0081, 0563,
. . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0039, 0149, 1781
Magnin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Marantz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0081, 0035
Marta. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Matsushita . . . . . . . . . . . . . . . . . . . . . 0035, 0162, 0454
Memorex . . . . . . . . . . . . . . . . . 0047, 0037, 0104, 0209,
. . . . . . . . . . . . . . . . . . . . 0454,0048, 0039, 0240, 0000,
. . . . . . . . . . . . . . . . . . . . 0479, 1037, 1162, 1237, 1262
Minolta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0042
Mitsubishi. . . . . . . . . . . . . . . . . . . . . . . . . . . 0043, 0067
Motorola . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0035, 0048
Multitech . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0072
NEC . . . . . . . . . . . . . . . . . . . . . 0038, 0041, 0067, 0104
Nikko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Noblex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Olympus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0035
Optimus . . . . . . . . . . . . . . . . . . 1062, 0162, 0037, 0048,
. . . . . . . . . . . . . . . 0104, 0432, 0454, 1048, 1162, 1262
Orion. . . . . . . . . . . . . . . . 0184, 0209, 0002, 0479, 1479
Panasonic . . . . . . . . . . . . . . . . 1062, 0035, 0225, 0454,
. . . . . . . . . . . . . . . . . . . . . . . . . 0616, 1035, 1162, 1262
Penney. . . . . . . . . . . . . . . . . . . 0035, 0037, 0240, 0042,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0038, 1035, 1237
Pentax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0042
Philco . . . . . . . . . . . . . . . . . . . . . . . . . 0035, 0209, 0479
Philips . . . . . . . . . . . . . . . 0081, 0035, 0618, 1081, 1181
Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0067
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0081
Profitronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Proscan. . . . . . . . . . . . . . . . . . . . . . . . 0060, 0760, 1060
Protec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0039
Quasar . . . . . . . . . . . . . . 0035, 0162, 0454, 1035, 1162
RCA . . . . . . . . . . . . . . . . . . . . . 0060, 0240, 0042, 0149,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0760, 1035, 1060
Radio Shack . . . . . . . . . . . . . . . . . . . . . . . . . 0000, 1037
Radix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Randex.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Realistic . . . . . . . . 0035, 0037, 0048, 0047, 0000, 0104
ReplayTV . . . . . . . . . . . . . . . . . . . . . . . . . . . 0614, 0616
Runco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0039
STS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0042
Samsung. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0045, 0240
Sanky . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0039, 0048
Sansui. . . . . . . . . . 0000, 0067, 0209, 0041, 0479, 1479
Sanyo . . . . . . . . . . . . . . . . . . . . . . . . . 0047, 0240, 0104
Scott . . . . . . . . . . . . . . . . . . . . . 0184, 0045, 0121, 0043
Sears . . . . . 0035, 0037, 0047, 0000, 0042, 0104, 1237
Semp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0045
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0048, 0848
Shintom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072
Shogun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Singer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0072
Sonic Blue. . . . . . . . . . . . . . . . . . . . . . . . . . . 0614, 0616
Sony . . . . . . 0035, 0032, 0000, 0033, 0636, 1032, 1232
Sylvania . . . . . . . . . . . . . 0035, 0081, 0000, 0043, 1781
Symphonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
TMK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Tatung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0041
Teac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0041
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0035, 0162
Teknika . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0035, 0037
Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
Tivo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0618, 0636
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0045, 0043
Totevision . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037, 0240
Unitech . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0045
Vector Research . . . . . . . . . . . . . . . . . . . . . . . . . . . 0038
Video Concepts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0045
Videomagic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Videosonic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0240
Wards . . . . . . . . . . . . . . . . . . . 0060, 0035, 0048, 0047,
. . . . . . . . . . 0081, 0240, 0000, 0042, 0072, 0149, 0760
White Westinghouse. . . . . . . . . . . . . . 0072, 1278, 0209
XR-1000 . . . . . . . . . . . . . . . . . . . . . . . 0072, 0000, 0035
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0038
Zenith. . . . . . . . . . . . . . . . . . . . 0039, 0000, 0209, 0033,
. . . . . . . . . . . . . . . . . . . . 0479, 1479, 0033, 0209, 0479
DVD BRAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . CODE
Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0641
Apex. . . . . . . . . . . . . . . . . . . . . 0672, 0717, 0755, 0794,
. . . . . . . . . . . . . . . . . . . . . . . . . 0795, 0796, 0797, 0830
Audiologic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0736
B & K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0655, 0662
Blue Parade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0571
Brooksonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0695
DVD2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0521
Daewoo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0784
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0490, 0634
Emerson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0591
Enterprise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0591
Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0670
GE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0522, 0717, 0815
GPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0769
Go Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0715
Gradiente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0651
Greenhill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0717
Harman/Kardon. . . . . . . . . . . . . . . . . . . . . . . 0582, 0702
Hitachi. . . . . . . . . . . . . . . . . . . . . . . . . 0490, 0573, 0664
Hiteker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0672
JBL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0702
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . 0623, 0558, 0867
KLH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0717
Kenwood. . . . . . . . . . . . . . . . . . . . . . . 0490, 0534, 0682
Konka . . . . . . . . . . . . . . . . . . . . . . . . . 0711, 0719, 0721
Koss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0651
Lasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0798
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . . . 0503, 0675
Malata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0782
Marantz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0539
Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0522
Mintek . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0717
Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0521
Nesa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0717
Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0627, 0503
Oritron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0651
Panasonic . . . . . . . . . . . . . . . . . . . . . . 0490, 1362, 0632
Philips . . . . . . . . . . . . . . . . . . . . 0503, 0539, 0646, 0854
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . 0525, 0571, 0632
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0539
Princeton. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0674
Proscan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0522
RCA . . . . . . . . . . . . . . . . . . . . . 0522, 0571, 1022, 0717
Rowa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0823
Sampo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0698
Samsung. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0573, 0820
Sansui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0695
Sanyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0670
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0630
Sherwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0633
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0533
Sylvania . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0675
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0490
Techwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0692
Theta Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0571
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0503, 0695
Urban Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . 0503
Yamaha. . . . . . . . . . . . . . . . . . . . . . . . 0490, 0545, 0539
Zenith . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0591, 0503
CABLE BRAND . . . . . . . . . . . . . . . . . . . . . . . . . . CODE
ABC . . . . . . . . . . . . . . . . . . . . . 0003, 0008, 0014, 0017
Americast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0899
Bell & Howel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0014
Bell South . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0899
Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0476
General Instrument. . . . . . . . . . 0003, 0476, 0276, 0810
GoldStar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0144
Hamlin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0009, 0273
Jerrold . . . . . . . . . .0476, 0003, 0276, 0012, 0014, 0810
Memorex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0000
Motorola . . . . . . . . . . . . . . . . . . 0476, 1106, 0276, 0810
Pace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0237
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . 0107, 0000
Philips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0305, 0317
Pioneer . . . . . . . . . . . . . . . . . . . 0144, 0533, 0877, 1877
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0000
Regal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0273, 0279
Runco. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0000
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0144
Scientific Atlanta . . . . . . . 0877, 0008, 0017, 0477, 1877
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1006
Starcom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0003
Supercable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0276
Tocom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0012
Torx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0003
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000
Zenith . . . . . . . . . . . . . . . . . . . . . . . . . 0000, 0525, 0899
SATELLITE BRAND (Set-Top-Box) . . . . . . . . . . CODE
AlphaStar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0772
Chapparral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0216
Crossdigital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1109
DishPro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1005, 0775
Echostar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1005, 0775
Expressvu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0775
GE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0566
GOI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0775
General Instrument . . . . . . . . . . . . . . . . . . . . . . . . . 0869
HTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0775
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0819
Hughes Network Systems. . . . . . . . . . 1142, 0749, 1749
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0775
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . . . 0724, 0722
Memorex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0724
Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0749
Motorola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0869
Next Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0869
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . 0247, 0701
Paysat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0724
Philips . . . . . . . . . . 1142, 0749, 0724, 1076, 0722, 1749
Proscan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0392
RCA . . . . . . . . . . . . . . . . . . . . . 0392, 0566, 0855, 0143
Radioshack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0869
SKY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0856
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1109
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0639
Star Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0869
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . 0749, 0790, 1749
Uniden. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0724, 0722
Zenith . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0856, 1856
AMPLIFIER BRAND . . . . . . . . . . . . . . . . . . . . . . CODE
Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0406
Bose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0674
Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0269
Curtis Mathes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0300
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0160
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0078
Harman/Kardon . . . . . . . . . . . . . . . . . . . . . . . . . . . .0892
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0331
Left Coast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0892
Linn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0269
Luxman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0165
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0269
Marantz. . . . . . . . . . . . . . . . . . . . . . . . 0269, 0321, 0892
NEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0264
Nakamichi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0321
Optimus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0395, 0300
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . 0308, 0521
Parasound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0246
Philips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0269, 0892
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0013, 0300
Polk Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . 0269, 0892
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0300
Realistic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0395
Sansui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0321
Shure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0264
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0689, 0220
Soundesign . . . . . . . . . . . . . . . . . . . . . . . . . . 0078, 0211
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0308, 0521
Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0331
Wards . . . . . . . . . . . . . . . . . . . . . . . . . 0013, 0078, 0211
Yamaha. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0354, 0133
RECEIVER BRAND (Amplifier) . . . . . . . . . . . . . CODE
ADC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0531
Adcom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0616
Aiwa . . . . . . . . . . . . . . . . . . . . . 1089, 1405, 0121, 0158,
. . . . . . . . . . . . . . . . . . . . . . . . . 0189, 0405, 1321, 1388
Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0076, 0224
Alco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1390
Anam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1074, 1609
Apex Digital. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1257
Arcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1120
Audiotronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1189
Audiovox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1390
Bose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1229
Capetronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0531
Carver . . . . . . . . . . 1089, 1189, 0008, 0042, 0189, 0360
Casio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0195
Celestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1264
Clarinette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0195
Compaq. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1136
Curtis Mathes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0080
Denon . . . . . . . . . .1104, 0004, 0273, 0771, 1311, 1360
Emerson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0424
Fisher . . . . . . . . . . . . . . . . . . . . . . . . . 0042, 0219, 0360
GPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1299
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0424, 0463
Glory Horse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1263
Harman/Kardon. . . . . . . . . . . . . . . . . . 0891, 0110, 0189
Hewlett Packard . . . . . . . . . . . . . . . . . . . . . . . . . . . 1181
Inkel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0062
JBL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0110, 1306
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . 0074, 1263, 1374
Kenwood . . . . . . . 1313, 1027, 1570, 1569, 0027, 0042,
. . . . . . . . . . 0077, 0186, 0313, 0314, 0569, 1051, 1052
Koss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0424, 1366
LXI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0181
Lexicon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1076
Linn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0189
Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0195
MCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0039, 0346
24
Magnavox . . . . . . . . . . . . . . . . . . . . . 1089, 1189, 0128,
. . . . . . . . . . . . . . . . . . . . . . . . . 0189, 0195, 0391, 0531
Marantz . . . . . . . . . . . . . . 1089, 1189, 0039, 0128, 0189
Modulaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0195
Musicmagic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1089
NAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0320
NEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0235
Nakamichi . . . . . . . . . . . . . . . . . . . . . . . . . . . 0097, 0347
Onkyo . . . . . . . . . . . . . . . 0100, 0135, 0380, 0842, 1298
Optimus . . . . . . . . 1023, 0042, 0080, 0177, 0181, 0186,
. . . . . . . . . . . . . . . 0219, 0531, 0670, 0738, 0801, 1074
Panasonic . . . . . . . . . . . . . . . . . . . . . 1518, 0039, 0309,
. . . . . . . . . . . . . . . . . . . . . . . . . 0367, 0518, 1288, 1350
Penney . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0195
Philips . . . . . . . . . . . . . . . . . . . 1089, 1189, 1269, 0189,
. . . . . . . . . . . . . . . . . . . . . . . . . 0391, 1120, 1268, 1283
Pioneer . . . . . . . . . . . . . . . . . . 1023, 0014, 0080, 0150,
. . . . . . . . . . . . . . . . . . . . 0244, 0531, 0630, 1343, 1384
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0189
Proscan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1254
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0039
RCA . . . . . . . . . . . 1023, 1254, 0054, 0080, 0346, 0360,
. . . . . . . . . . . . . . . 0530, 0531, 1074, 1154, 1390, 1609
Radio Shack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1263
Realistic . . . . . . . . . . . . . . . . . . . . . . . 0163, 0181, 0195
Samsung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1295
Sansui. . . . . . . . . . . . . . . . . . . . 0189, 1089, 0193, 0346
Sanyo . . . . . . . . . . . . . . . . . . . . . . . . . 0219, 0801, 1251
Scott . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0163, 0322
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1286, 0186
Sherwood . . . . . . . . . . . . . . . . . . . . . . 0062, 0491, 0502
Sony. . . . . . . . . . . . . . . . . . . . . 1058, 1258, 1158, 0158,
. . . . . . . . . . . . . . . . . . . . . . . . . 0168, 0474, 1042, 1458
Soundesign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0670
Stereophonics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Sunfire . . . . . . . . . . . . . . . . . . . 1313, 0313, 0314, 1052
Teac . . . . . . . . . . . . . . . . . . . . . . . . . . 0463, 0163, 1074
Technics. . . . . . . . . . . . . . . . . . . . . . . 1308, 1309, 1518,
. . . . . . . . . . . . . . . . . . . . . . . . . 0039, 0208, 0309, 0518
Thorens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1189
Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0074
Wards . . . . . . . . . . . . . . .0014, 0054, 0080, 0158, 0189
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . 0176, 0186, 1176
Yorx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0195
Zenith . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0857
AUDIO BRAND . . . . . . . . . . . . . . . . . . . . . . . . . . CODE
Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0010, 0404
AudioSource . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0351
Cambridge Soundworks . . . . . . . . . . . . . . . . . . . . . 0351
Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0351
Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0052
Fosgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0259
Harmon/Kardon. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0477
JBL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0477
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0073
KLH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0351
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0325
Nikko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0376
Paramount Pictures . . . . . . . . . . . . . . . . . . . 0317, 0351
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0056
SSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0317
Sansui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0325
Schneider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0376
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0010, 0576
Soundesign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0376
Yorx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0376
SET TOP BOX BRAND . . . . . . . . . . . . . . . . . . . . CODE
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1120
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1010
Princeton . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0113, 0295
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1190
Sensory Science . . . . . . . . . . . . . . . . . . . . . . . . . . . 1126
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1010
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0639
PERSONAL VIDEO RECORDER BRAND . . . . . CODE
Echostar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0775, 1005
Hughes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1142
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0616
Philips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0618
Proscan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0392
ReplayTV . . . . . . . . . . . . . . . . . . . . . . . . . . . 0614, 0616
SonicBlue . . . . . . . . . . . . . . . . . . . . . . . . . . . 0614, 0616
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0639, 0636
Tivo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0618, 0636
REAR PANEL CONNECTIONS
Rear Panel of Display Monitor
2-Way signal splitter
RGB
OUTPUT
13
9
12
8
3
11
7
2
R
4
6
1
L
14
V
10
S-VIDEO
5
OUTPUT
15
VCR #1
ANT
IN
AUDIO OUT
DIGITAL
OUTPUT CAPABILITY
DIGITAL OUTPUT
AUDIO OUT
Subwoofer
DVI
to
HDMI
Stereo/Amplifier
Y
OUTPUT
PB/CB PR/CR L
R
S-VIDEO V
L
INPUT
R
S-VIDEO V
L
OUTPUT
R
Y
PB PR
OUTPUT
L
R
To an amplifier/receiver
with optical input
capability
DVD Player
VCR #2
Laserdisc player, VCR,
camcorder, etc.
HDTV Set-Top Box
(PROVIDED)
To a digital IEEE1394 capable
device, such as a Digital VCR or
Set-Top-Box
NOTE:
CONNECT TO
IR BLASTER
(PROVIDED)
CONNECT TO
IR BLASTER
Cables are optional, except when specified.
25
(PROVIDED)
FIRST TIME USE
Outside antenna or
cable TV coaxial cable
TIPS ON REAR PANEL CONNECTIONS
• S-VIDEO, YPbPR, IEEE 1394 or HDMI connections are provided for high performance laserdisc players, VCRs etc. that have
this feature. Use these connections in place of the standard video connection if your device has this feature.
FIRST TIME USE
• If your device has only one audio output (mono sound), connect it to the left audio jack on the AVC Center.
• Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
• A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 4 in
the example on page 25). Refer to your VCR operating guide for more information on line input-output connections.
• Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
• COMPONENT: Y-PBPR (Input 1 & 2) connections are provided for high performance components, such as DVD players and settop-boxes. Use these connections in place of the standard video connection if your device has this feature.
• Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV’s PB input
and the components R-Y output to the TV’s PR input.
• Your component outputs may be labeled Y-CBCR. In this case, connect the components CB output to the TV’s PB input and the
components CR output to the TV’s PR input.
• It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs. (See page 54)
• To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPR, RGB and HDMI input
jacks.
• Input 1 or 2 can accept HDMI signal.
• Input 1 or 2 can accept both component and composite video signal.
• S-VIDEO monitor output may be used for recording only when the input is of S-VIDEO type.
• When using a DVI or HDMI input from a Set-Top-Box, it is recommended to use a 1080i or 720p input signal.
26
THE REMOTE CONTROL
In addition to controlling all the functions on your HITACHI LCD TV, the new remote control is designed to operate different types
of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with one
touch. Basic operation keys are grouped together in one area.
To operate your LCD TV, point the remote control at the remote sensor of the AVC box/Display Monitor and select the TV by
pressing the F or E button of the Source Access on the remote. The TV mode indicator will blink, indicating that the remote will
now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and select PVR by pressing the F or E button of the
Source Access on the remote. The PVR mode indicator will blink, indicating that the remote will now control your VCR (see page
45 for instructions on how to program the remote to control your VCR).
To operate your PVR (Personal Video Recorder), point the remote at the remote sensor of the PVR and select PVR by pressing
the F or E button of the Source Access on the remote. The PVR mode indicator will blink, indicating that the remote will now
control your PVR (see page 45 for instruction on how to program the remote to control your PVR).
To operate your cable box, point the remote at the remote sensor of the cable box and select the CABLE (CBL) by pressing the
F or E button of the Source Access on the remote. The CBL mode indicator will blink, indicating that the remote will now control
your cable box (see page 42 for instructions on how to program the remote to control your cable box).
To operate your DVD player, point the remote at the remote sensor of the DVD player and select DVD by pressing the F or E
button of the Source Access on the remote. The DVD mode indicator will blink, indicating that the remote will now control your
DVD Player (see page 44 for instruction on how to program the remote to control your DVD
player).
To operate additional audio equipment, point the remote at the remote sensor of the component you wish to control and select
AMP by pressing the F or E button of the Source Access on the remote. The AMP mode indicator will blink, indicating that the
remote will now control your audio equipment (see page 46 for instructions on how to program the remote to control additional
Audio/Video equipment).
A/V NET
GUIDE
NOTE:
When you are in a dark room, press any button on the remote to light up the buttons. The
illumination will light for a few seconds during this time and the current mode indicator will
flash one time. These buttons will not appear to light if the room is too bright.
27
THE REMOTE CONTROL
To operate your set-top-box or satellite receiver point the remote at the remote sensor of the set-top-box and select the SETTOP-BOX (STB) by pressing the F or E button of the Source Access on the remote. If you have a satellite receiver, use this
button to program your satellite receiver. The STB mode indicator will blink, indicating that the remote will now control your settop-box (see page 43 for instructions on how to program the remote to control your set-top-box).
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
a
b
d
c
e
h
f
g
m
A/V NET
k
i
l
o
j
GUIDE
THE REMOTE CONTROL
n
q
p
q
s
r
a POWER button
Press this button to turn the TV set on or off when the remote is in TV mode. (See page 27 for instructions on how to set the remote
control to TV mode.)
b MODE Indicator
Turns on or blinks to show remote control mode.
c SOURCE ACCESS (F , E) buttons
Press these buttons to select remote control mode.
d SOURCE ACCESS (ENT) button
Hold down this button while entering your device code to program the remote (see pages 42-49). You can also use this button in
an optional Input access feature (see page 47).
e PAUSE button
Press the PAUSE button to freeze the picture. Press the EXIT button to return the picture to motion. Press the PAUSE button
repeatedly to cycle through the three different freeze modes (see page 41).
Freeze
Freeze
Freeze
Freeze
Freeze
28
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
f ASPECT button
Press this button to quickly change the picture format ASPECT ratio.
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
4:3 STANDARD
Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for
only 15% of your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted
area of the picture will age more rapidly than the gray areas.
4:3 EXPANDED
Use this aspect mode to display conventional (4:3) sources by linearly increasing image expansion from
the center towards the edges of the display area in order to fill it.
4:3
Use these aspect modes to zoom in on conventional (4:3) sources.
Zoom1/Zoom2
16:9 STANDARD
Use this aspect mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 aspect
ratio.
16:9 Zoom
Use this aspect to Zoom-in once while in 16:9 aspect.
(1)
NTSC/480i/480P Input
4:3
(2)
4:3 STANDARD
4:3 EXPANDED
4:3 ZOOM1
16:9 ZOOM
16:9 STANDARD
4:3 ZOOM2
4:3 EXPANDED
4:3 ZOOM1
16:9 STANDARD
4:3 ZOOM2
THE REMOTE CONTROL
INPUT
480i/480P Input
16:9
INPUT
4:3 STANDARD
16:9 ZOOM
(3)
720P/1080i Input
16:9
INPUT
16:9 STANDARD
16:9 ZOOM
4:3 EXPANDED
(4) RGB (Analog Input) ASPECT DISPLAY MODE.
RGB (Analog) INPUT SIGNAL
Others
X
ASPECT
NORMAL
MODE
AVAILABILITY FULL
SVGA/XGA
REAL
NORMAL
FULL
VGA
480p
REAL
REAL(1)
NORMAL NORMAL(1)
FULL
FULL(1)
720p
1080i
X
X
X
X
FULL(2,3) FULL(2,3)
For numbers in ( ), please see corresponding note below.
NOTES: 1.
2.
3.
4.
Lack of raster can be seen in RGB (Analog) when a 480p signal is input.
AUTO ADJUST function (see page 85) is not available in 720p and 1080i input signal.
FULL aspect mode, only 95% of information can be displayed (5% is treated as overscan).
Depending on the Aspect selection, Closed Caption display may be missing.
29
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
g DAY/NIGHT button
Press this button to toggle between Day and Night picture mode settings. Select Day for day time viewing with more brightness
and contrast to compete with room light. Select Night for night time viewing with less brightness and contrast for a more detailed
picture (see page 51 for settings changes).
NOTE:
For automatic DAY/NIGHT picture mode settings, see page 68.
h PICTURE-IN-PICTURE button
See separate section on pages 39-41 for a description.
i MENU button
The MENU button will start the On-Screen Display.
j GUIDE button
Press this button to access the Channel Guide. Press the GUIDE button again to return to normal viewing.
THE REMOTE CONTROL
Select CHANNEL GUIDE to display available program information. Only scanned programs that are available at the present time
will show in the Channel Guide (see Auto Channel Scan on page 60).
--:--AM
Channel Guide (Cable)
KGTV-DT
GUIDE
Smart Travels
KPBS-HD
Draon Tales
Move
SEL
Tune
KNSD-DT
15-1
KPBS-HD
3:00PM
3:30PM
CC
3:00PM
GUIDE
15-2
3:30PM
INFO Detail
Use the CURSOR PAD G , H , F , E to highlight the channel of choice (example: KPBS-HD).
Press the CURSOR PAD G , H , to highlight the subchannel of choice (example: 15-1).
Press the SELECT button to tune the subchannel of choice.
NOTE:
The availability of Channel Guide Information will depend on the type of Antenna input (Analog, Digital) and Cable
subscription.
k EXIT button
This button will exit all On-Screen Displays.
l CURSOR PAD/SELECT button
All the On-Screen Display features can be set or adjusted by using the CURSOR PAD, except for numeric entries.
The CURSOR PAD will highlight functions or adjust and set different features. Press the CURSOR PAD toward desired direction
and press the SELECT button to select.
30
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
m AV NET button
Press this button to access the Audio/Video network (AV Net) menu. The AV Net allows the user to control external components
with the LCD TV’s remote control. When you press the AV NET button, the following window will pop up within the Display Monitor
screen. The window will disappear after 30 seconds if you don’t press any buttons.
Select Device Setup to start.
Use CURSOR PAD G, H, F, E to navigate and SELECT to select button. The command on the button is passed through the IR
mouse and onto the AUDIO/VIDEO equipment. These on-screen buttons are called “Soft Keys”.
Customize your Audio/Video equipment list and soft keys by selecting the Custom options and following the instructions of the
AV NET learning wizard (see page 32).
This window shows the available Audio/Video equipment soft keys. The equipment list will scroll up or down.
POWER
DVD
MENU
MORE
DVD2
ORIGINAL MENU
OF EQUIPMENT
VCR
VCR2
MORE..
AV Receiver
Move
SEL
Move
Select
Return
AV NET
2x
POWER
DVD
CH H
CH G
MENU
TV/VCR
DVD2
P
ORIGINAL MENU
OF EQUIPMENT
MORE
VCR2
AV Receiver
Move
SEL
MORE..
Select
Move
AV NET
Return
2x
DVD
POWER
CH H
CH G
DVD2
AUDIO
VOL H
VOL G
VCR
Inputs:
VCR2
SOURCE1
SOURCE2
SOURCE3
SOURCE4
AV Receiver
SOURCE5
SOURCE6
SOURCE7
SOURCE8
CH H
CH G
Move
SEL
Select
POWER
PV Recorder
GUIDE
Custom
MORE
Device Setup
SEL
Move
POWER
CH H
CH G
Cable Box
1
2
3
Set Top Box
4
5
6
Custom
7
8
9
LAST CH
0
Device Setup
SEL
MORE..
Select
PV Recorder
Move
ORIGINAL MENU
OF EQUIPMENT
INFO
Set Top Box
Move
MENU
TV/VCR
Cable Box
INFO
POWER
CH H
CH G
MENU
PV Recorder
Cable box
1
2
3
INFO
Cable box
Set Top Box
4
5
6
GUIDE
Custom
7
8
9
LAST CH
0
Device Setup
NOTES:
SEL
Return
Select
PV Recorder
Move
AV NET
Select
Set Top Box
Custom
Device Setup
Move
SEL
Select
1. Devices will not be available until Device Setup is completed (see pages 22-24).
2. The “Custom” option will not be available until the Custom device Setup is learned and completed. After completion,
the “Custom” tag will be replaced with the device tag (see page 32).
3. The Custom option only accepts one device at a time. The second Custom device setup will replace the first device.
31
THE REMOTE CONTROL
VCR
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
AV NET LEARNING WIZARD
This function of the AV NET makes it more expandable because it allows the user to use equipment that is not supported by the
pre-code library, listed on page 24. For example, after programming your equipment to the AV NET and the soft keys do not work,
the user just has to follow the steps below. The AV NET Learning Wizard will transfer any remote button IR code of your equipment
to the soft keys of your AV NET. If all remote button transfers are successful, the user can now control their equipment by using
the LCD TV remote control.
1.
2.
3.
4.
Please choose the device to set up.
(
(
(
(
(
(
(
)
)
)
)
)
)
)
DVD
DVD2
VCR
VCR2
AV Receiver
PV Recorder
Cable Box
BACK
Move
( ) Set Top Box
( ) DVD3 (Custom)
( ) VCR3 (Custom)
( ) PVR2 (Custom)
( ) CBL2 (Custom)
( ) STB2 (Custom)
List
SETUP
SEL
Press A/V NET button on the remote control.
Use the CURSOR PAD to select DEVICE SETUP, press the SELECT button.
Use the CURSOR PAD/SELECT button to choose CUSTOM option (Ex. VCR3).
Use the CURSOR PAD to select Setup, press the SELECT button.
MODIFY
Next Step
HITACHI AV NET WIZARD (Learning)
1. Select TV Softkeys to learn, press the SELECT button.
Select the VCR3 softkey to learn?
TV Softkeys
POWER
THE REMOTE CONTROL
CH
TV/VCR
CH
MENU
SELECT
BACK
Move
SEL
EXIT
Select
HITACHI AV NET WIZARD (Learning)
Press and hold desired button to
transfer the command to AV NET.
1. Press and hold the EE button of the VCR remote control while pointing directly
at the learning AV NET sensor of the AVC at a distance of 1 to 2 meters.
Please wait while AV NET
Learns the command...
HITACHI AV NET WIZARD (Learning)
Transfer not completed!
Try again?
NO
Move
YES
SEL
Select
YES
HITACHI AV NET WIZARD (Learning)
1. Select OK to continue.
Transfer was successfull
Press OK to continue.
BACK
Move
OK
SEL
Select
NOTES: 1. It is very important to point the equipment’s remote control directly close (about 12 inches) to the LEARNING AV NET
sensor of the AVC (see pages 9-10) while trying to transfer the desired remote control button to the AV NET.
2. To access the Menu function of a specific equipment, select the “MENU” soft key on OSD, then press the MENU button
of the LCD TV remote control. In order to use CURSOR PAD and EXIT button of the LCD TV remote control, “arrows,
select, and EXIT” button must be learned. Then the menu of the programmed equipment can be controlled with the
LCD TV remote control.
32
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
n INPUTS button
When the remote control is in TV mode, press this button to access the INPUTS menu. Use the CURSOR PAD and SELECT button
to select the inputs that are being used. Pressing the INPUTS button repeatedly will also cycle through the Inputs menu items.
Then press the SELECT button to select.
Photo Input
Ant B
Ant A
Input 1
Input 2
Move
Photo Input
SEL
Sel.
Select to access your pictures from a digital camera connected to the Photo Input in the front panel of
the AVC (see page 34).
Select to choose Antenna B.
Ant A
Select to choose Antenna A.
Input 1
Select to choose Input 1 for Video 1.
Input 2
Select to choose Input 2 for Video 2.
Input 3
Select to choose Input 3 for Video 3.
Input 4
Select to choose Input 4 for Video 4.
Input 5
Select to choose Input 5 for Video 5.
RGB
IEEE 1394
Select to choose for RGB input (see pages 78-87).
Select to choose for IEEE 1394 Input (see page 36).
33
THE REMOTE CONTROL
Ant B
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
PHOTO INPUT
This feature is useful for viewing digital still pictures from your digital camera using the Photo Input in the front panel of the AVC.
Photo Input
Ant B
Ant A
Input 1
THE REMOTE CONTROL
Input 2
No.
7/10
03/04/03
1632x1232
Vacation
Picture No.
Date
Resolution
File Name
JUMP
Select this menu item to view the chosen picture number.
Jump
Slideshow
Rotate
Jump
Please Enter
Picture Number
- -
7
NOTES:
1.
2.
3.
4.
5.
6.
7.
0
The maximum number of digital Photos that can be displayed is 999.
Press INFO button to show Picture Numbers in Thumbnail view, plus other information in individual photos.
Digital photos recorded on a DVD-RAM disc may not work with this Photo Input.
Certain types of digital cameras may not work with this Photo Input.
Digital cameras with low battery power may not properly display your photos in this input.
The screen may show “Input device not detected” if the digital camera’s large capacity memory is fully loaded.
Please wait 1 or 2 minutes before checking your Photo Input connections.
The screen may show “Input device not detected” due to slow access time on some digital cameras. Please wait
1 or 2 minutes before checking your Photo Input connections.
34
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
SLIDESHOW
Select this menu item to start a slideshow of the Photos in the Digital Camera. Time interval selections can be set from 5, 10
and 30 seconds.
Jump
Slideshow
Rotate
Jump
Slideshow
Rotate
Start
Interval
5 sec
Slideshow
5 seconds.. etc.
5 seconds
ROTATE
Select this menu item to rotate selected photos either clockwise (CURSOR PAD E) and counterclockwise (CURSOR PAD F).
Rotate menu item is also available in THUMBNAIL view.
Jump
Slideshow
Rotate
Rotate
1/10
1/10
1/10
NOTES:
1.
2.
3.
Photo file names modified on a computer should be 8 characters (Ex. ABCD1234.jpg). 1st character: letters;
2nd to 4th: letters or numbers; 5th to 8th: numbers. Photo files should be first placed on a sub directory name
with 8 characters (Ex. 123ABCDE). 1st to 3rd: number; 4th to 8th: letters. The sub directory then should be placed
on a main directory with a “dcim” file name format.
Supported image types are up to 3072 x 2304; JPEG format should conform with DCF Standard (Design rule for
Camera File System).
This TV set displays only digital pictures from digital cameras which meet DCF Standard. Pictures that were copied,
edited or modified on a computer may not be displayed on the TV set.
35
THE REMOTE CONTROL
Use CURSOR PAD G, H to highlight Slideshow item.
While interval is highlighted, press SELECT to change interval time from 5, 10 and 30 seconds. Each press will change interval
time from the three mentioned choices.
Press SELECT to stop on a chosen picture of the slideshow. After 30 seconds, the slideshow will resume, or press SELECT again
to continue the slideshow.
Press EXIT to exit the slideshow.
HOW TO USE THE REMOTE TO
CONTROL YOUR LCD TV
IEEE1394 Use this function to control your devices with digital interface capability. Press the INPUTS button, CURSOR PAD and
SELECT button to select IEEE 1394.
(When an IEEE1394 device is not connected)
INPUTS
Device not detected
Input 5
RGB
IEEE 1394
Photo Input
Ant B
Move
SEL
Sel.
(When an IEEE1394 device is connected)
INPUTS
DVHS1
Input 5
POWER
00:00:00
THE REMOTE CONTROL
RGB
IEEE 1394
Photo Input
Ant B
Move
SEL
[DEVICE MAKER
Counter
DVHS1
ANT
Move
ANT
Sel.
Move
:
DEVICE MODEL
TV
TV
]
00:11:30
00:00:00
POWER
In/Out:
In/Out:
SEL Select
TV
TV
SEL Select
Use CURSOR PAD G , H to highlight connected device (example D-VHS1).
Use CURSOR PAD E to select connected device (example D-VHS1).
Use CURSOR PAD cursors to highlight POWER.
Press the SELECT button to power on the device.
Use CURSOR PAD cursors to select D-VHS operation.
Press down on the CURSOR PAD to enable the selected operation.
Use CURSOR PAD cursors to highlight the TV IN/OUT operation.
Press down on CURSOR PAD to select: TV IN is DVHS
TV OUT is ANT A
NOTES:
1. The digital device will be automatically recognized if properly connected.
2. Four (4) IEEE1394 devices can be listed on the menu, but only 1 device at a time can be used. If a fifth device is
connected, it will replace the first device on the menu list.
3. This TV’s IEEE1394 connection is not compatible with a DV camcorder (Digital Video Camcorder) or a PC.
4. The On-Screen-Display will not disappear until the EXIT button is pressed.
5. Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other
manufacturers devices should be brought to the attention of those manufacturers.
6. TV IN/OUT functions are not available when DVHS is in playback or recording.
36
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
o INFO button
Press this button when you want to check the channel being received, the picture source, if the channel has stereo (ST) or second
audio program (SAP), the time, CHANNEL ID and if the TIMER is set.
ANALOG CHANNELS
3:32 PM
Ant A 22
Stereo
R
INFO
Aspect
Mode
Closed
Captioning
Day/Night
Mode
Time
Main Picture Source
Audio Broadcast
Broadcast Rating
Day CC Off
--:-- AM
--:-- PM
View
REC
4:3 Expanded
--:-- AM
--:-- AM
Timer Recording
Event Timer
DIGITAL CHANNELS
INFO
3:32PM
Ant A 122-1
KPBS-DT
Engl
TV-Y
720p Format
3:32 PM
No Info
INFO
Closed
Captioning
Aspect Mode
Day/Night
Mode
CC Off
Day
--:-- AM
--:-- PM
View
Event Timer
INFO
INFO
NOTES:
1.
2.
REC
4:3 Expanded
--:-- AM
--:-- AM
INFO
Timer Recording
3:32 PM
S-IN: 3
VID 3
When an S-VIDEO
Input is connected to
VIDEO: 3.
3:32 PM
YPBPR: 1
VID: 1
When a
COMPONENT
VIDEO: Y-PBPR Input
is connected to
VIDEO: 1.
The Sleep Timer info will show momentarily after releasing INFO button.
Press the INFO button again or the EXIT button to return to normal viewing.
37
Return
THE REMOTE CONTROL
TV Time
Picture Source
Channel ID
Program Language
Broadcast Rating
Signal Format
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
p VOLUME (VOL) WHEEL, MUTE button
Use the VOL WHEEL (G or H) until you obtain the desired sound level.
To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the VOL wheel down. Press
the VOL wheel again to turn the sound off completely (MUTE). To restore the sound, press the VOL wheel one more time, or VOL
Up (G).
Volume 8
Soft Mute 8
Mute 8
Closed Captioning will display automatically when MUTE/SOFT MUTE is on and Closed Caption is set to AUTO (see page 75).
When the TV power is turned off at a volume level 31 or greater, the volume level will default to 30 when the TV is turned on.
However, if it is set to a level 30 or less, the volume level will be at the level it was set when the TV is turned ON.
THE REMOTE CONTROL
q CHANNEL (CH) WHEEL/CHANNEL SELECTOR buttons
The CHANNEL wheel or the CHANNEL SELECTOR buttons are used to select channels, lock access code, etc. Use the
CHANNEL WHEEL (G or H) to select the desired channel. Use the CHANNEL SELECTOR buttons to enter one, two, or three
numbers to select channels. Enter “0” first for channels 1 to 9, or simply press the single digit channel you wish to tune then wait
a few seconds for the TV to tune. For Digital Channels, use the CHANNEL SELECTOR buttons with the (-) DASH button. Channel
selection may also be performed by CHANNEL WHEEL up (G) or CHANNEL WHEEL down (H).
Press the channel (CH) wheel to switch to Favorite (FAV) channel mode. You will know you are in Favorite Channel mode when
(FAV) is displayed and the displayed channel is GREEN. Press it again to return to your regular tuned channels. You can add any
channel to your Favorite channel list by pressing and holding down the Channel (CH) wheel until the displayed channel turns from
WHITE to highlighted GREEN. You can also delete a channel from your favorite channel list by pressing and holding down the
Channel (CH) wheel until the displayed channel turns highlighted GREEN to WHITE.
Ant A 22
FAV Ant A 22
Ant A 22
r (-) DASH button
Use the (-) DASH button with the CHANNEL SELECTOR buttons to enter Digital Channels that have subchannel numbers indicated
by (-) DASH (example 15-1).
s LAST CHANNEL (LC) button
Press this button to toggle between the current and last channel viewed.
38
PICTURE-IN-PICTURE (PIP)
Your HITACHI LCD TV incorporates Two Tuner technology designed for improved viewing enjoyment. This Two Tuner feature allows you
to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each.
ANT A input can be viewed as both the main picture and the sub-picture simultaneously. ANT B can only be viewed as a main picture.
To select between main picture and PIP sub-picture tuning, use the CURSOR PAD on the remote. The green highlighted channel display
will move with every press of the CURSOR PAD (F, E).
The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV
program while viewing other programs from any of the video inputs.
b
a
A/V NET
GUIDE
VCR
Use above connection to view VCR program as a sub-picture while viewing another program as main picture (ANT A, ANT B,
INPUT:1, INPUT:2, INPUT:4, or INPUT:5). You may also view the VCR program as a main picture while viewing another program
as a sub-picture (ANT A, INPUT:1, INPUT:2, INPUT:4 or INPUT:5).
When installing a CableCARD, connect your coaxial cable to ANT A (see page 13). ANT B will not be available while using a
CableCARD.
a PIP button
Press the PIP button and a sub-picture will appear in one of the four different modes (POP, PIP, SPLIT or SURF), depending on the
INPUT signal. To change the PIP mode, use the PIP button to cycle through the four different modes.
POP MODE PICTURE-IN-PICTURE
POP Mode PIP displays the sub-picture outside of the main picture. Use the CURSOR PAD (G, H) to move the sub-picture. This
feature is not available with a 1080i component input or Digital signal. Please refer to the PICTURE-IN-PICTURE MODES Table
(see page 40).
Main Picture
Sub Picture
NOTES: 1.
2.
3.
4.
Digital Channels cannot be viewed as a sub-picture.
PIP MODE Picture-in-Picture is only available with a 1080i component or digital signal.
Press the CURSOR PAD (F, E) to enable the sub-picture sound.
Sub-picture channel availability depends on the channel list.
39
THE REMOTE CONTROL
Back of VCR
AUDIO OUT VIDEO OUT
PICTURE-IN-PICTURE (PIP)
PIP MODE PICTURE-IN-PICTURE
This feature is only available with a 1080i component input or Digital signal. To prevent a pattern burn, occasionally move the subpicture using the CURSOR PAD.
Main Picture
Sub Picture
SPLIT MODE PICTURE-IN-PICTURE
Split Mode PIP displays the main picture and sub-picture evenly on the screen.
Sub Picture
THE REMOTE CONTROL
Main Picture
SURF MODE PICTURE-IN-PICTURE
Surf Mode PIP automatically scans all active channels (those set in memory) and displays them as PIP Pictures or Thumbnail
channels.
NOTE:
1
2
3
4
5
6
7
8
9
10
11
12
Selecting individual sub-pictures while in Surf mode is not available.
PICTURE-IN-PICTURE (PIP) MODES
Sub
PIP Mode Main
NTSC
POP
NTSC
Yes
480i
Yes
PIP 4x3
1080i
Yes
PIP 16x9
1080i
Yes
SPLIT
NTSC
Yes
480i
Yes
480p
Yes
720p
Yes
1080i
Yes
12 Pix
Ant A/B
40
480i
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
480p
Yes
Yes
Yes
Yes
Yes
-
720p 1080i
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
PICTURE-IN-PICTURE (PIP)
b PAUSE button
If you wish to freeze the sub-picture, press the PAUSE button. This is convenient when trying to write down the address for a
mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the EXIT button. Press
the PAUSE button repeatedly to toggle between FREEZE modes (Main Freeze, SPLIT and STROBE).
Freeze
Freeze
Freeze
Freeze
Freeze
MAIN FREEZE
Press the PAUSE button to freeze one frame of the picture you are currently viewing and the frozen frame will show in the Main
Picture. Press the EXIT button to return to normal viewing. This feature is useful for freezing a picture frame with addresses.
SPLIT FREEZE
Press the PAUSE button to freeze the picture you are currently viewing (only the right sub-picture will freeze). Press the EXIT button
to return to normal viewing.
Main Picture
Sub Picture
STROBE FREEZE
Press the PAUSE button to freeze three frames of the picture you are currently viewing (only the 3 sub-pictures will freeze). Press
the EXIT button to return to normal viewing. This feature is useful for viewing a moving picture that has many details, for example,
a close play in a sporting event or a golf swing.
FREEZE
FREEZE
NOTES: 1. The default FREEZE mode is the MAIN freeze followed by the SPLIT freeze and then the STROBE freeze. The last
Freeze mode you selected before you pressed the EXIT button will be the one that comes up after pressing the
PAUSE button again.
2. Each freeze frame in Strobe Freeze is delayed about 0.1 (1/10) second.
3. Strobe Freeze is not available in 480p/720p/1080i inputs.
41
THE REMOTE CONTROL
Hot Springs Clay Mask
C/O John Doe
Run-Spa Retreat
P.O. Box 55512
Any Town, USA 98765
Check or
Money Order Only
1-800-555-1212
HOW TO USE THE REMOTE
TO CONTROL CABLE BOX FUNCTIONS
Operating the precoded function for your cable box.
THE REMOTE CONTROL
This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of
your cable box (refer to pages 48-49 for pre-codes).
1.
Turn ON your cable box.
2.
Aim the remote control at the front of your cable box.
3.
To switch to Cable (CBL) pre-coded mode, use the SOURCE ACCESS buttons (F , E) on the remote control to position the LED
light to the corresponding selection.
4.
Hold down the ENT button on the remote and enter the four digit preset code that matches your cable box as shown on pages 4849. Release the ENT button. The indicator light will flash 3 times if the code was accepted.
5.
Aim the remote at the cable box and press the POWER button. The remote will turn off your cable box when the correct four digit
preset code is entered. When this occurs, the remote control is programmed for your cable box. If the cable box does not turn off,
try a different four digit preset code.
6.
The remote will now control your Cable box.
a
NOTES:
1. If your cable box cannot be operated after performing the
above procedures, your cable box code has not been
precoded into the remote.
2.
3.
b
In the unlikely event that your cable box cannot be
operated after performing the above procedures, please
consult your cable box operating guide.
A/V NET
a
The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
GUIDE
a PRECODED CABLE BOX buttons
b
These buttons transmit the chosen precoded cable codes.
b EXCLUSIVE TV buttons
b
These buttons are for operating the TV.
a
a
MY CABLE BOX CODE IS:
NOTE:
Refer to instruction manual of the Cable Box for operation of the buttons exclusively for the Cable Box.
42
HOW TO USE THE REMOTE TO CONTROL
SET-TOP-BOX/SATELLITE RECEIVER FUNCTIONS
Operating the precoded function for your set-top-box/satellite receiver.
This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the
remote system of your set-top-box/satellite systems (refer to pages 48-49 for pre-codes).
1.
Turn ON your set-top-box/satellite systems.
2.
Aim the remote control at the front of your set-top-box/satellite systems.
3.
To switch to set-top-box/satellite (STB) pre-coded mode, use the SOURCE ACCESS buttons (F , E) on the remote control to
position the LED light to the corresponding selection.
4.
Hold down the ENT button on the remote and enter the four digit preset code that matches your set-top-box/satellite receiver as
shown on page 48-49. Release the ENT button. The indicator light will flash 3 times if the code was accepted.
5.
Aim the remote at the set-top-box/satellite receiver and press the POWER button. The remote will turn off your set-top-box/satellite
receiver when the correct four digit preset code is entered. When this occurs, the remote control is programmed for your set-topbox/satellite receiver. If the set-top-box/satellite receiver does not turn off, try a different four digit preset code.
6.
The remote will now control your set-top-box/satellite receiver.
a
2.
3.
b
In the unlikely event that your set-top-box/satellite
receiver cannot be operated after performing the above
procedures, please consult your set-top-box/satellite
receiver operating guide.
A/V NET
a
The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
b
a PRE-CODED SET-TOP-BOX/SATELLITE RECEIVER
b
buttons
These buttons transmit the chosen pre-coded set-topbox/satellite codes.
GUIDE
a
a
b EXCLUSIVE TV buttons
These buttons are for operating the TV.
MY SATELLITE RECEIVER/STB CODE IS:
NOTE:
Refer to instruction manual of the set-top-box/satellite receiver for operation of the buttons exclusively for the set-topbox/satellite receiver.
43
THE REMOTE CONTROL
NOTES:
1. If your set-top-box/satellite receiver cannot be operated
after performing the above procedures, your set-topbox/satellite receiver code has not been precoded into the
remote.
HOW TO USE THE REMOTE
TO CONTROL DVD FUNCTIONS
Operating the precoded function for your DVD player.
THE REMOTE CONTROL
This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of
your DVD player (refer to pages 48-49 for pre-codes).
1.
Turn ON your DVD player.
2.
Aim the remote control at the front of your DVD player.
3.
To switch to DVD pre-coded mode, use the SOURCE ACCESS buttons (F , E) on the remote control to position the LED light to
the corresponding selection.
4.
Hold down the ENT button on the remote and enter the four digit preset code that matches your DVD player, as shown on pages
48-49. Release the ENT button. The indicator light will flash 3 times if the code was accepted.
5.
Aim the remote at the DVD player and press the POWER button. The remote will turn off your DVD player when the correct four
digit preset code is entered. When this occurs, the remote control is programmed for your DVD player. If the DVD player does not
turn off, try a different four digit preset code.
6.
The remote will now control your DVD player.
7.
You will need to set the display type of your DVD player to 16:9 widescreen.
NOTES:
1. If your DVD player cannot be operated after performing
the above procedures, your DVD player’s code has not
been precoded into the remote.
2. In the unlikely event that your DVD player cannot be
operated after performing the above procedures, please
consult your DVD player operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
a
a
b
A/V NET
a
b
a PRECODED DVD Buttons
GUIDE
These buttons transmit the chosen precoded DVD codes.
b EXCLUSIVE TV Buttons
b
These buttons are for operating the TV.
a
MY DVD PLAYER CODE IS:
NOTE:
Refer to instruction manual of the DVD player for operation of the buttons exclusively for the DVD player.
44
HOW TO USE THE REMOTE
TO CONTROL VCR/PVR FUNCTIONS
Operating the precoded function for your VCR/PVR (Personal Video Recorder).
This remote is designed to operate different types of VCRs/PVRs. You must first program the remote to match the remote system of
your VCR/PVR (refer to pages 48-49 for pre-codes).
1.
Turn ON your VCR/PVR.
2.
Aim the remote control at the front of your VCR/PVR.
3.
To switch to VCR/PVR pre-coded mode, use the SOURCE ACCESS buttons (F , E) on the remote control to position the LED light
to the corresponding selection.
4.
Hold down the ENT button on the remote and enter the four digit preset code that matches your VCR/PVR, as shown on pages 4849. Release the ENT button. The indicator light will flash 3 times if the code was accepted.
5.
Aim the remote at the VCR/PVR and press the POWER button. The remote will turn off your PVR when the correct four digit preset
code is entered. When this occurs, the remote control is programmed for your VCR/PVR. If the VCR/PVR does not turn off, try a
different four digit preset code.
6.
The remote will now control your VCR/PVR.
a
a
b
A/V NET
a
a PRECODED VCR/PVR Buttons
GUIDE
These buttons transmit the chosen precoded VCR/PVR
codes.
b
a
b EXCLUSIVE TV Buttons
These buttons are for operating the TV.
a
MY VCR/PVR CODE IS:
NOTE:
Refer to instruction manual of the VCR/PVR for operation of the buttons exclusively for the VCR/PVR.
45
THE REMOTE CONTROL
NOTES:
1. If your PVR cannot be operated after performing the
above procedures, your PVR’s code has not been
precoded into the remote.
2. In the unlikely event that your PVR cannot be operated
after performing the above procedures, please consult
your PVR operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
4. VCR precode library is included in the PVR mode.
Default device for this mode is Hitachi VCR.
5. INFO, GUIDE and LC (Last Channel) buttons are for PVR
devices, not for VCR.
HOW TO USE THE REMOTE
TO CONTROL ADDITIONAL AUDIO EQUIPMENT
Operating the precoded function for your Audio component.
THE REMOTE CONTROL
This remote is designed to operate different types of Audio component. You must first program the remote to match the remote system
of your Audio component (refer to pages 48-49 for pre-codes).
1.
Turn ON your Audio component you wish to control with the Remote.
2.
Aim the remote control at the front of your Audio component.
3.
To switch to Audio (AMP) component pre-coded mode, use the SOURCE ACCESS buttons (F , E) on the remote control to position
the LED light to the corresponding selection.
4.
Hold down the ENT button on the remote and enter the four digit preset code that matches your Audio component, as shown on
pages 48-49. Release the ENT button. The indicator light will flash 3 times if the code was accepted.
5.
Aim the remote at the Audio component and press the POWER button. The remote will turn off your Audio component when the
correct four digit preset code is entered. When this occurs, the remote control is programmed for your Audio component. If the
Audio component does not turn off, try a different four digit preset code.
6.
The remote will now control your Audio component.
7.
Repeat steps 1 - 6 if you wish to program the remote to control another Audio component.
a
NOTES:
1. If your Audio component cannot be operated after
performing the above procedures, your Audio
component’s code has not been precoded into the
remote.
2. In the unlikely event that your Audio component cannot be
operated after performing the above procedures, please
consult your Audio equipment operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
4. CD precode library is included in the AMP mode. Default
device for this mode is Hitachi Audio/Video Receiver
(AVR/AMP).
5. INPUT, GUIDE, Channel (up/down), Volume (up/down)
and REC button are not for CD devices.
a
b
A/V NET
a
b
GUIDE
a
a
a PRECODED AUDIO Buttons
These buttons transmit the chosen precoded Audio
component codes.
b EXCLUSIVE TV Buttons
These buttons are for operating the TV.
MY AUDIO EQUIPMENT CODE IS:
CD
AMP/RCVR
NOTES:
1.
2.
The REC (Record) button only applies to some precoded amplifier/receiver codes.
Refer to instruction manual of the Audio equipment for operation of the buttons exclusively for the Audio equipment.
46
HOW TO USE THE REMOTE “ENT” BUTTON TO
ACCESS THE SPECIFIED INPUT OF THE LCD TV
INPUT ACCESS
This optional feature allows the user of the remote control to setup it’s ENTER (ENT) button to access the specified input of the TV.
Setup for this feature is applicable to the remote control’s normal mode only and only applies to the DVD, CBL, STB, PVR and AMP
modes.
1. Select the desired device mode (DVD, CBL, STB, PVR, or AMP) by using your SOURCE ACCESS buttons (F, E) to position the
LED indicator to the corresponding selection.
2. Hold down the ENTER (ENT) button on the remote and enter the four digit preset code that
matches your device as shown on pages 48-49.
3. Then enter the assigned input number (1-5) that the device is related to.
4. Release ENTER (ENT) button.
5. If done correctly, the device LED indicator will flash 3 times to confirm proper setup.
6. The remote will now control the desired device.
7. Pressing the ENTER (ENT) button will now access the video input (1-5) of the desired device.
1
Select DVD mode by using your SOURCE ACCESS buttons (F, E) to position
the LED indicator to DVD.
2
Hold down the ENTER (ENT) button and press the numbers 0, 5, 7 and 3.
3
Then press the number 1 for the assigned input number of the DVD player.
4
Release ENTER (ENT) button.
5
6
7
1, 5, 6
1
2, 4, 7
A/V NET
If done correctly, the device LED indicator will flash 3 times to confirm proper
setup.
The remote will now control the DVD player.
GUIDE
Press the ENTER (ENT) button to instantly access the video input of your DVD
on Input 1.
3
2
NOTES:
1.
2.
This feature is optional.
Assigned input numbers can be used more than once if applicable.
47
THE REMOTE CONTROL
SETUP EXAMPLE (Hitachi DVD with precode 0573 connected to INPUT 1 of the TV)
THE REMOTE CONTROL
PVR/VCR, CABLE, SATELLITE, DVD AND
AUDIO CODES FOR REMOTE CONTROL
VCR BRAND . . . . . . . . . . . . . . . CODE
ABS . . . . . . . . . . . . . . . . . . . . . . . . 1972
Admiral . . . . . . . . . . . . . . . . 0048, 0209
Adventura . . . . . . . . . . . . . . . . . . . .0000
Aiko . . . . . . . . . . . . . . . . . . . . . . . . 0278
Aiwa . . . . . . . . . . . . . 0000, 0037, 0307
Akai . . . . . . . . . . . . . . 0041, 0061, 0106
Alienware. . . . . . . . . . . . . . . . . . . . 1972
America Action . . . . . . . . . . . . . . . 0278
American High. . . . . . . . . . . . . . . . 0035
Asha . . . . . . . . . . . . . . . . . . . . . . . 0240
Audiovox . . . . . . . . . . . . . . . 0037, 0278
Beaumark . . . . . . . . . . . . . . . . . . . 0240
Bell & Howell . . . . . . . . . . . . . . . . . 0104
Broksonic . . . . . . . . . . . . . . 0121, 0184,
. . . . . . . . . . . . . . . . . 0002, 0209, 0479
CCE. . . . . . . . . . . . . . . . . . . 0072, 0278
Calix . . . . . . . . . . . . . . . . . . . . . . . 0037
Canon . . . . . . . . . . . . . . . . . . . . . . 0035
Carver . . . . . . . . . . . . . . . . . . . . . . 0081
Cineral . . . . . . . . . . . . . . . . . . . . . . 0278
Citizen . . . . . . . . . . . . . . . . . 0278, 0037
Colt . . . . . . . . . . . . . . . . . . . . . . . . 0072
Craig. . . . . . . . . . . . . . . . . . 0037, 0072,
. . . . . . . . . . . . . . . . . 0047, 0240, 0271
Curtis Mathes . . . . . . . . . . . 0035, 0041,
. . . . . . . . . . . . . . . . . . . . . . 0060, 0162
CyberPower. . . . . . . . . . . . . . . . . . 1972
Cybernex . . . . . . . . . . . . . . . . . . . . 0240
Daewoo . . . . . . . . . . . 0278, 0045, 0561
Dell . . . . . . . . . . . . . . . . . . . . . . . . 1972
Denon . . . . . . . . . . . . . . . . . . . . . . 0042
Durabrand . . . . . . . . . . . . . . 0039, 0038
Dynatech . . . . . . . . . . . . . . . . . . . . 0000
Electrohome . . . . . . . . . . . . . . . . . 0037
Electrophonic. . . . . . . . . . . . . . . . . 0037
Emerex . . . . . . . . . . . . . . . . . . . . . 0032
Emerson. . . . . . 0037, 0184, 000, 0121,
. . . . . . . 0043, 0209, 0002, 0278, 0061,
. . . . . . . 0208, 0212, 0479, 0561, 1593
Fisher . . . . . . . . . . . . 0104, 0047, 0066
Fuji. . . . . . . . . . . . . . . . . . . . 0033, 0035
Funai . . . . . . . . . . . . . . . . . . 0000, 1593
GE. . . . . 0035, 0060, 0240, 0202, 0761
Garrard . . . . . . . . . . . . . . . . . . . . . 0000
Gateway . . . . . . . . . . . . . . . . . . . . 1972
Go Video . . . . . . . . . . . . . . . 0432, 0526
GoldStar . . . . . . . . . . . . . . . 0037, 0038
Gradiente. . . . . . . . . . . . . . . 0000, 0008
HI-Q . . . . . . . . . . . . . . . . . . . . . . . . 0047
HP . . . . . . . . . . . . . . . . . . . . . . . . . 1972
Harley Davidson . . . . . . . . . . . . . . 0000
Harman/Kardon . . . . . . . . . . 0038, 0081
Harwood . . . . . . . . . . . . . . . . . . . . 0072
Headquarter . . . . . . . . . . . . . . . . . 0046
Hewlett Packard . . . . . . . . . . . . . . 1972
Hitachi . . . . . . . 0000, 0041, 0042, 0105
Howard Computers . . . . . . . . . . . . 1972
Hughes Network Systems . . . . . . . 0042
iBuy Power . . . . . . . . . . . . . . . . . . 1972
JVC . . . . . . . . . . . . . . 0067, 0041, 0008
Jensen. . . . . . . . . . . . . . . . . . . . . . 0041
KEC . . . . . . . . . . . . . . . . . . . 0037, 0278
KLH . . . . . . . . . . . . . . . . . . . . . . . . 0072
Kenwood . . . . . . . . . . 0041, 0067, 0038
Kodak . . . . . . . . . . . . . . . . . 0035, 0037
LG . . . . . . . . . . . . . . . . . . . . . . . . . 0037
LXI . . . . . . . . . . . . . . . . . . . . . . . . . 0037
Lloyd's . . . . . . . . . . . . . . . . . 0000, 0208
Logik . . . . . . . . . . . . . . . . . . . . . . . 0072
MEI . . . . . . . . . . . . . . . . . . . . . . . . 0035
MGA . . . . . . . . . . . . . 0043, 0240, 0061
MGN Technology. . . . . . . . . . . . . . 0240
MTC. . . . . . . . . . . . . . . . . . . 0000, 0240
Magnasonic . . . . . . . . . . . . . . . . . . 0593
Magnavox. . . . 0035, 0081, 0563, 0000,
0039, 0593
Magnin. . . . . . . . . . . . . . . . . . . . . . 0240
Marantz . . . . . . . . . . . . . . . . 0081, 0035
Marta . . . . . . . . . . . . . . . . . . . . . . . 0037
Matsushita . . . . . . . . . 0035, 0162, 1162
Media Center PC. . . . . . . . . . . . . . 1972
Memorex . . . . 0035, 0162, 0037, 0048,
. . 0039, 0047, 0240, 0000, 0104, 0209,
. . 0046, 0307, 0479, 1037, 1162, 1262
Microsoft . . . . . . . . . . . . . . . . . . . . 1972
Mind. . . . . . . . . . . . . . . . . . . . . . . . 1972
Minolta. . . . . . . . . . . . . . . . . 0042, 0105
Mitsubishi . . . . . . . . . 0061, 0043, 0067
Motorola . . . . . . . . . . . . . . . 0035, 0048
Multitech . . . . . . . . . . . . . . . 0000, 0072
NEC. . . . . . . . . 0038, 0041, 0067, 0104
Nikko . . . . . . . . . . . . . . . . . . . . . . . 0037
Noblex . . . . . . . . . . . . . . . . . . . . . . 0240
Northgate. . . . . . . . . . . . . . . . . . . . 1972
Olympus . . . . . . . . . . . . . . . . . . . . 0035
Optimus . . . . . 0593, 1062, 0162, 0037,
. . 0048, 0104, 0432, 1048, 1162, 1262
Optonica . . . . . . . . . . . . . . . . . . . . 0062
Orion . . . . . . . . 0184, 0209, 0002, 0479
Panasonic . . . 0162, 1062, 0035, 0616,
. . . . . . . . . . . . . . . . . . . . . . . 1162, 1262
Penney . . . . . . 0035, 0037, 0240, 0042,
. . . . . . . . . . . . . . . . . . . . . . . . . . . 0038
Pentax . . . . . . . . . . . . . . . . . 0042, 0105
Philco . . . . . . . 0035, 0209, 0479, 0561
Philips. . . . . . . . . . . . 0081, 0035, 0618,
. . . . . . . . . . . . . . . . . . 1081, 1181, 0062
Pilot . . . . . . . . . . . . . . . . . . . . . . . . 0037
Pioneer . . . . . . . . . . . . . . . . . . . . . 0067
Polk Audio . . . . . . . . . . . . . . . . . . . 0081
Profitronic . . . . . . . . . . . . . . . . . . . 0240
Proscan . . . . . . . . . . . 0060, 0202, 0761
Protec . . . . . . . . . . . . . . . . . . . . . . 0072
Pulsar . . . . . . . . . . . . . . . . . . . . . . 0039
Quarter . . . . . . . . . . . . . . . . . . . . . 0046
Quartz . . . . . . . . . . . . . . . . . . . . . . 0046
Quasar. . . . . . . . . . . . 0035, 0162, 1162
RCA . . . . . . . . 0060, 0240, 0042, 0105,
. . . . . . . . . . . . 0106, 0202, 0761, 0880
Radio Shack . . . . . . . . . . . . 0000, 1037
Radix . . . . . . . . . . . . . . . . . . . . . . . 0037
Randex. . . . . . . . . . . . . . . . . . . . . . 0037
Realistic . . . . . 0035, 0037, 0048, 0047,
. . . . . . . 0000, 0104, 0046, 0062, 0066
ReplayTV. . . . . . . . . . . . . . . 0614, 0616
Runco . . . . . . . . . . . . . . . . . . . . . . 0039
STS . . . . . . . . . . . . . . . . . . . . . . . . 0042
Samsung . . . . . . . . . . 0045, 0240, 0432
Sanky . . . . . . . . . . . . . . . . . 0039, 0048
Sansui . . . . . . . . . . . 0000, 0067, 0209,
. . . . . . . . . . . . 0041, 0479, 1479, 0271
Sanyo . . . . . . . 0047, 0240, 0104, 0046
Scott . . . . . . . . . . . . . 0184, 0045, 0121,
. . . . . . . . . . . . . . . . . 0043, 0210, 0212
Sears . . 0035, 0037, 0047, 0000, 0042,
. . . . . . . 0104, 1237, 0046, 0066, 0105
Semp. . . . . . . . . . . . . . . . . . . . . . . 0045
Sharp. . . . . . . . . . . . . 0048, 0848, 0062
Shintom . . . . . . . . . . . . . . . . . . . . . 0072
Shogun . . . . . . . . . . . . . . . . . . . . . 0240
Singer . . . . . . . . . . . . . . . . . . . . . . 0072
Sonic Blue . . . . . . . . . . . . . . 0614, 0616
Sony . . . . . . . . . . . . . 0035, 0032, 0000,
. . . . . . . . . . . . 0033, 0636, 1032, 1972
Sylvania . . . . . . . . . . 0035, 0081, 0000,
. . . . . . . . . . . . . . . . . 0043, 0593, 1593
Symphonic . . . . . . . . 0000, 0593, 1593
Systemax. . . . . . . . . . . . . . . . . . . . 1972
TMK. . . . . . . . . . . . . . . . . . . 0240, 0208
Tagar Systems. . . . . . . . . . . . . . . . 1972
Tatung . . . . . . . . . . . . . . . . . . . . . . 0041
Teac. . . . . . . . . . . . . . . . . . . 0000, 0041
Technics . . . . . . . . . . . . . . . 0035, 0162
Teknika . . . . . . . . . . . 0000, 0035, 0037
Thomas . . . . . . . . . . . . . . . . . . . . . 0000
Tivo . . . . . . . . . . . . . . 0618, 0636, 1503
Toshiba. . . . . . . . . . . 0045, 0043, 0066,
. . . . . . . . . . . . 0210, 0212, 0366, 0845,
. . . . . . . . . . . . 1008, 1145, 1503, 1972
48
Totevision . . . . . . . . . . . . . . 0037, 0240
Touch. . . . . . . . . . . . . . . . . . . . . . . 1972
Unitech . . . . . . . . . . . . . . . . . . . . . 0240
Vector . . . . . . . . . . . . . . . . . . . . . . 0045
Vector Research . . . . . . . . . . . . . . 0038
Video Concepts . . . . . . . . . . 0045, 0061
Videomagic . . . . . . . . . . . . . . . . . . 0037
Videosonic . . . . . . . . . . . . . . . . . . . 0240
Viewsonic . . . . . . . . . . . . . . . . . . . 1972
Wards. . 0060, 0062, 0035, 0048, 0047,
. . 0081, 0240, 0000, 0042, 0072, 0212
White Westinghouse . . . . . . 0072, 0209
XR-1000 . . . . . . . . . . 0072, 0000, 0035
Yamaha . . . . . . . . . . . . . . . . . . . . . 0038
ZT Group . . . . . . . . . . . . . . . . . . . . 1972
Zenith . . . . . . . 0039, 0000, 0209, 0033,
. . . . . . . . . . . . . . . . . . . . . . 0479, 1479
DVD BRAND . . . . . . . . . . . . . . . CODE
AMW . . . . . . . . . . . . . . . . . . . . . . . 0872
Aiwa. . . . . . . . . . . . . . . . . . . . . . . . 0641
Allegro . . . . . . . . . . . . . . . . . . . . . . 0869
Apex Digital . . 0672, 0717, 0755, 0794,
. . . . . . . . . . . . 0796, 0797, 1004, 1020,
. . . . . . . 1056, 1061, 1100, 1915, 1937
Audiovox . . . . . . . . . . . . . . . 0790, 1072
Axion . . . . . . . . . . . . . . . . . . . . . . . 1072
Blaupunkt . . . . . . . . . . . . . . . . . . . 0717
Blue Parade. . . . . . . . . . . . . . . . . . 0571
Brooksonic. . . . . . . . . . . . . . . . . . . 0695
CAVS . . . . . . . . . . . . . . . . . . . . . . . 1057
CineVision . . . . . . . . . . . . . . 0876, 0869
Classic. . . . . . . . . . . . . . . . . . . . . . 1917
Coby . . . . . . . . . . . . . . . . . . . . . . . 1086
Curtis Mathes . . . . . . . . . . . . . . . . 1087
CyberHome . . . . . . . . 0816, 1023, 1024
DVD2000. . . . . . . . . . . . . . . . . . . . 0521
Daewoo . . . . . . . . . . . . . . . 0784, 0705,
. . . . . . . . . . . . . . . . . 0833, 0869, 1918
Denon . . . . . . . . . . . . . . . . . 0490, 0634
Dual . . . . . . . . . . . . . . . . . . . 1068, 1085
Emerson . . . . . . . . . . . . . . . 0591, 0675
Enterprise . . . . . . . . . . . . . . . . . . . 0591
Fisher . . . . . . . . . . . . . . . . . . . . . . 0670
Funai . . . . . . . . . . . . . . . . . . . . . . . 0675
GE . . . . . . . . . . . . . . . 0522, 0717, 0815
GPX. . . . . . . . . . . . . . . . . . . 0699, 0769
Gateway . . . . . . . . . . . . . . . . . . . . 1073
Go Video . . . . . . . . . 0744, 0715, 0783,
. . . . . . . . . . . . . . . . . 0833, 0869, 1075
Gradiente. . . . . . . . . . . . . . . . . . . . 0651
Greenhill . . . . . . . . . . . . . . . . . . . . 0717
Grundig . . . . . . . . . . . . . . . . . . . . . 0705
Harman/Kardon . . . . . . . . . . . . . . . 0702
Hitachi . . . . . . . . . . . . 0573, 0664, 0695
Hiteker . . . . . . . . . . . . . . . . . . . . . . 0672
IRT. . . . . . . . . . . . . . . . . . . . . . . . . 0783
Initial . . . . . . . . . . . . . . . . . . . . . . . 0717
Integra . . . . . . . . . . . . . . . . . . . . . . 0627
Hiteker . . . . . . . . . . . . . . . . . . . . . . 0672
JBL . . . . . . . . . . . . . . . . . . . . . . . . 0702
JVC . . . . . . . . . 0623, 0558, 0867, 1901
KLH . . . . . . . . . . . . . . 0717, 0790, 1020
Kawasaki . . . . . . . . . . . . . . . . . . . . 0790
Kenwood . . . . . . . . . . . . . . . 0490, 0534
Koss . . . . . . . . . . . . . . . . . . . . . . . 0651
Lasonic . . . . . . . . . . . . . . . . . . . . . 0798
Lite-On. . . . . . . . . . . . . . . . . . . . . . 1058
Magnavox . . . . 0503, 0675, 1914, 1976
Marantz . . . . . . . . . . . . . . . . . . . . . 0539
Memorex . . . . . . . . . . . . . . . . . . . . 0695
Microsoft . . . . . . . . . . . . . . . . . . . . 0522
Mintek . . . . . . . . . . . . . . . . . 0717, 0839
Mitsubishi . . . . . . . . . . . . . . 0521, 1521
Nesa . . . . . . . . . . . . . . . . . . . . . . . 0717
Norcent . . . . . . . . . . . . . . . . 1003, 0872
Onkyo . . . . . . . . . . . . . . . . . 0627, 0503
Oritron . . . . . . . . . . . . . . . . . . . . . . 0651
Panasonic . . . . . . . . . . . . . . . . . . . 0490
Philco. . . . . . . . . . . . . . . . . . . . . . . 0790
Philips . . . . . . . 0503, 0539, 0646, 0854
Pioneer . . . . . . . . . . . 0525, 0571, 1902
Polaroid . . . . . . . . . . . . . . . . 1061, 1086
Polk Audio . . . . . . . . . . . . . . . . . . . 0539
Proscan . . . . . . . . . . . . . . . . . . . . . 0522
Qwestar . . . . . . . . . . . . . . . . . . . . . 0651
RCA . . . . . . . . . . . . . 0522, 0571, 0717,
. . . . . . . . . . . . . . . . . 0790, 0822, 1974
Recco . . . . . . . . . . . . . . . . . . . . . . 0698
Rio . . . . . . . . . . . . . . . . . . . . . . . . . 0869
Rotel . . . . . . . . . . . . . . . . . . . . . . . 0623
Rowa . . . . . . . . . . . . . . . . . . . . . . . 0823
Sampo . . . . . . . . . . . . . . . . . 0698, 0752
Samsung . . . . . . . . . . . . . . 0490, 0573,
. . . . . . . . . . . . . . . . . 0820, 0744, 1075
Sansui . . . . . . . . . . . . . . . . . . . . . . 0695
Sanyo . . . . . . . . . . . . 0670, 0695, 0873
Semp . . . . . . . . . . . . . . . . . . . . . . . 0503
Sharp. . . . . . . . . . . . . . . . . . 0630, 0752
Shinsonic. . . . . . . . . . . . . . . 0533, 0839
Sonic Blue . . . . . . . . . . . . . . . . . . . 0869
Sony . . . . . . . . . . . . . . . . . . . . . . . 0533
Sylvania. . . . . . . . . . . . . . . . . . . . . 0675
Symphonic. . . . . . . . . . . . . . . . . . . 0675
TYT . . . . . . . . . . . . . . . . . . . . . . . . 0705
Teac. . . . . . . . . . . . . . . . . . . . . . . . 0790
Technics . . . . . . . . . . . . . . . . . . . . 0490
Theta Digital . . . . . . . . . . . . . . . . . 0571
Tivo . . . . . . . . . . . . . . . . . . . . . . . . 1996
Toshiba. . . . . . . . . . . 0503, 0695, 1045,
. . . . . . . . . . . . . . . . . 1988, 1996, 2006
Tredex . . . . . . . . . . . . . . . . . 0799, 0803
US Logic . . . . . . . . . . . . . . . . . . . . 0839
Urban Concepts . . . . . . . . . . . . . . 0503
Venturer. . . . . . . . . . . . . . . . . . . . . 0790
XBox . . . . . . . . . . . . . . . . . . . . . . . 0522
Yamaha . . . . . . . . . . . 0490, 0545, 0539
Zenith . . . . . . . . . . . . 0591, 0503, 0869
CABLE BRAND . . . . . . . . . . . . . CODE
ABC . . . 0003, 0008, 0011, 0013, 0014,
. . . . . . . . . . . . . . . . . . . . . . . . . . . 0017
Allegro . . . . . . . . . . . . . . . . . 0153, 0315
Americast . . . . . . . . . . . . . . . . . . . 0899
Antronix . . . . . . . . . . . . . . . . . . . . . . 022
Archer . . . . . . . . . . . . . 022, 0153, 0797
Bell & Howel. . . . . . . . . . . . . . . . . .0014
Bell South . . . . . . . . . . . . . . . . . . . 0899
Cabletenna . . . . . . . . . . . . . . . . . . 0022
Cableview . . . . . . . . . . . . . . . . . . . 0022
Century . . . . . . . . . . . . . . . . . . . . . 0153
Citizen . . . . . . . . . . . . . . . . . 0153, 0315
ClearMax . . . . . . . . . . . . . . . . . . . . 0883
Clearmaster . . . . . . . . . . . . . . . . . . 0883
Colour Voice . . . . . . . . . . . . 0025, 0031
Comtronics . . . . . . . . . . . . . . . . . . 0040
Contec . . . . . . . . . . . . . . . . . . . . . . 0019
Coolmax . . . . . . . . . . . . . . . . . . . . 0883
Digi . . . . . . . . . . . . . . . . . . . . . . . . 0637
Director . . . . . . . . . . . . . . . . . . . . . 0476
Dumont . . . . . . . . . . . . . . . . . . . . . 0637
Emerson . . . . . . . . . . . . . . . . . . . . 0797
Everquest . . . . . . . . . . . . . . 0015, 0040
Focus. . . . . . . . . . . . . . . . . . . . . . . 0400
Garrard . . . . . . . . . . . . . . . . . . . . . 0153
Gemini . . . . . . . . . . . . . . . . . 0015, 0797
General Instrument. . . . . . . 0003, 0011,
. . . . . . . . . . . . . . . . . 0476, 0276, 0810
GoldStar . . . . . . . . . . . . . . . 0040, 0144
Goodmind . . . . . . . . . . . . . . . . . . . 0797
Hamlin . . . . . . . 0009, 0020, 0034, 0273
Hitachi . . . . . . . . . . . . . . . . . . . . . . 0011
Jasco. . . . . . . . . . . . . 0015, 0153, 0315
Jerrold . . . . . . 0003, 0011, 0012, 0014,
. . . . . . . 0015, 0024, 0276, 0476, 0810
Memorex . . . . . . . . . . . . . . . . . . . .0000
Motorola . . . . . . . . . 0276, 0476, 0810,
. . . . . . . . . . . . . . . . . . 1106, 1254, 1376
Movie Time . . . . . . . . . . . . . . . . . . 0063
Multivision . . . . . . . . . . . . . . . . . . . 0012
PVR/VCR, CABLE, SATELLITE, DVD AND
AUDIO CODES FOR REMOTE CONTROL
SATELLITE BRAND (Set-Top-Box) . .
CODE
AlphaStar. . . . . . . . . . . . . . . . . . . . 0772
Amway. . . . . . . . . . . . . . . . . 0043, 0075
Astro Industries . . . . . . . . . . . . . . . 0095
BSR . . . . . . . . . . . . . . . . . . . . . . . . 0095
Cable Innovations . . . . . . . . . . . . . 0554
Capetronic . . . . . . . . . . . . . . . . . . . 0095
Century . . . . . . . . . . . . . . . . . . . . . 0856
Channel Master. . . . . . . . . . 0018, 0212
Chapparral . . . . . . . . 0053, 0209, 0216
Conifer . . . . . . . . . . . . . . . . . . . . . . 0004
Crossdigital . . . . . . . . . . . . . . . . . . 1109
Curtis Mathes . . . . . . . . . . . . . . . . . 061
DX Antenna . . . . . . . . . . . . . . . . . . 0041
DirecTV 0392, 0566, 0639, 1639, 1142,
. . . . . . . 0247, 0749, 1749, 0724, 0819,
. . . . . . . 1856, 1076, 1109, 0099, 1052,
. . . . . . . 1053, 1054, 1442, 1443, 1444
Dish Network System 1005, 0775, 1170
DishPro . . . . . . . . . . . . . . . . 1005, 0775
Drake. . . . . . . . . . . . . 0018, 0064, 0245
Echostar . . . . . . . . . . 1005, 0775, 0148,
. . . . . . . . . . . . . . . . . . 0269, 0280, 1170
Expressvu . . . . . . . . . . . . . . . . . . . 0775
GE . . . . . . . . . . . . . . . . . . . . . . . . . 0566
GOI . . . . . . . . . . . . . . . . . . . . . . . . 0775
General Instrument . . 0869, 0547, 0554
Gradiente. . . . . . . . . . . . . . . . . . . . 0856
HTS . . . . . . . . . . . . . . . . . . . . . . . . 0775
Hitachi . . . . . . . . . . . . . . . . . . . . . . 0819
homecable. . . . . . . . . . . . . . . . . . . 0238
Hughes Network Systems . . . . . . 1142,
. . . . . . . 0749, 1749, 1442, 1443, 1444
Hytek . . . . . . . . . . . . . . . . . . . . . . . 0095
IQ. . . . . . . . . . . . . . . . . . . . . . . . . . 0210
IQ Prism . . . . . . . . . . . . . . . . . . . . 0210
Innova . . . . . . . . . . . . . . . . . . . . . . 0099
Intersat . . . . . . . . . . . . . . . . . . . . . 0043
JVC . . . . . . . . . . . . . . . . . . . 0775, 1170
Janeil . . . . . . . . . . . . . . . . . . . . . . . 0152
Legend . . . . . . . . . . . . . . . . . . . . . 0269
Macom. . . . . . . . . . . . . . . . . 0018, 0061
Magnavox . . . . . . . . . . . . . . 0724, 0722
Memorex . . . . . . . . . . . . . . . 0724, 0269
Mitsubishi . . . . . . . . . . . . . . . . . . . 0749
Motorola . . . . . . . . . . . . . . . . . . . . 0869
Netsat . . . . . . . . . . . . . . . . . . . . . . 0099
Next Level . . . . . . . . . . . . . . . . . . . 0869
Norsat . . . . . . . . . . . . . . . . . . . . . . 0004
Pace . . . . . . . . . . . . . . . . . . . . . . . 0455
Panasonic . . . . . . . . . 0247, 0701, 0152
Paysat . . . . . . . . . . . . . . . . . . . . . . 0724
Philips. . . . . . . 1142, 0749, 0724, 1076,
. . . . . . . . . . . . 0722, 1749, 0856, 0099
Pico . . . . . . . . . . . . . . . . . . . . . . . . 0075
Proscan . . . . . . . . . . . . . . . . 0392, 0566
RCA. . . . . . . . . 0392, 0566, 0855, 0143
Radioshack . . . . . . . . . . . . . 0869, 0554
Ramsey . . . . . . . . . . . . . . . . . . . . . 0075
Realistic. . . . . . . . . . . . . . . . . . . . . 0052
SKY . . . . . . . . . . . . . . 0856, 1856, 0099
STS . . . . . . . . . . . . . . . . . . . 0041, 0210
Samsung . . . . . . . . . . . . . . . 1276, 1109
Sony . . . . . . . . . . . . . . . . . . 0639, 1639
Star Choice . . . . . . . . . . . . . . . . . . 0869
Star Trak . . . . . . . . . . 0180, 0421, 0547
Strong . . . . . . . . . . . . . . . . . . . . . . 0421
Tivo . . . . . . . . . 1142, 1442, 1443, 1444
Toshiba. . . . . . . . . . . 0749, 1749, 0790,
. . . . . . . . . . . . 0061, 0082, 1052, 1053,
. . . . . . . 1054, 1285, 1286, 1287, 1289
Town & Country. . . . . . . . . . . . . . . 0547
Uniden . . . . . . 0724, 0722, 0052, 0074,
. . . . . . . . . . . . 0076, 0238, 0370, 0554
Zenith . . . . . . . 0856, 1856, 0061, 0064
Soundesign . . . . . . . . . . . . . 0078, 0211
Technics . . . . . . . . . . . . . . . 0308, 0521
Toshiba . . . . . . . . . . . . . . . . . . . . . 0353
Victor . . . . . . . . . . . . . . . . . . . . . . . 0331
Wards . . . . . . . . . . . . 0013, 0078, 0211
Yamaha . . . . . . . . . . . . . . . . 0354, 0133
RECEIVER BRAND (Amplifier) CODE
ADC. . . . . . . . . . . . . . . . . . . . . . . . 0531
Aiwa . . . 1405, 0121, 0158, 0189, 0405
Anam . . . . . . . . . . . . . . . . . . 1074, 1609
Arcam . . . . . . . . . . . . . . . . . . . . . . 1120
Audiotronic. . . . . . . . . . . . . . . . . . . 1189
Bose . . . . . . . . . . . . . 0639, 1229, 1253
Capetronic . . . . . . . . . . . . . . . . . . .0531
Carver . . . . . . . . . . . . 1189, 0042, 0189
Casio . . . . . . . . . . . . . . . . . . . . . . . 0195
Clarinette . . . . . . . . . . . . . . . . . . . . 0195
Coby . . . . . . . . . . . . . . . . . . . . . . . 1263
Compaq . . . . . . . . . . . . . . . . . . . . . 1136
Curtis Mathes . . . . . . . . . . . . . . . . 0080
Dell . . . . . . . . . . . . . . . . . . . . . . . . 1383
Denon. . . . . . . . . . . . . . . . . .0004, 1360
Fisher . . . . . . . . . . . . . . . . . . . . . . 0042
Garrard . . . . . . . . . . . . . . . . . . . . . 0463
Glory Horse . . . . . . . . . . . . . . . . . . 1263
Harman/Kardon . . . . . 0891, 0110, 0189
Hewlett Packard . . . . . . . . . . . . . . 1181
Hitachi . . . . . . . . . . . . . . . . . . . . . . 0228
Integra . . . . . . . . . . . . . . . . . . . . . . 0135
JBL. . . . . . . . . . . . . . . . . . . . . . . . . 0110
JVC . . . . . . . . . . . . . . . . . . . 0074, 1263
KLH . . . . . . . . . . . . . . . . . . . . . . . . 1428
Kenwood . . . . . . . . . 1313, 1570, 1569,
. . . . . . . . . . . . 0027, 0042, 0186, 0239
LXI . . . . . . . . . . . . . . . . . . . . . . . . . 0181
Linn. . . . . . . . . . . . . . . . . . . . . . . . .0189
Lloyd's . . . . . . . . . . . . . . . . . . . . . . 0195
MCS . . . . . . . . . . . . . . . . . . . . . . . 0039
Magnavox. . . . 1189, 1269, 0189, 0195,
0391, 0531
Marantz . . . . . . 1189, 0039, 0189, 1269
Mitsubishi . . . . . . . . . . . . . . . . . . . 1393
Modulaire. . . . . . . . . . . . . . . . . . . . 0195
Musicmagic . . . . . . . . . . . . . . . . . . 1089
Nakamichi . . . . . . . . . . . . . . . . . . . 0097
Onkyo . . . . . . . . . . . . . . . . . 0135, 0842
Optimus . . . . . 1023, 0042, 0080, 0177,
. . . . . . . . . . . . 0181, 0186, 0219, 0531,
. . . . . . . . . . . . 0670, 0738, 0801, 1074
Panasonic . . . . 1518, 0039, 0309, 0367
Penney . . . . . . . . . . . . . . . . . . . . . 0195
Philips . . 1189, 1269, 0189, 0391, 1120
Pioneer. . . . . . . . . . . 1023, 0014, 0080,
. . . . . . . . . . . . 0150, 0244, 0531, 0630
Polk Audio . . . . . . . . . . . . . . . . . . . 0189
Proscan . . . . . . . . . . . . . . . . . . . . . 1254
Quasar. . . . . . . . . . . . . . . . . . . . . . 0039
RCA . . . . . . . . . . . . . 1023, 1254, 0080,
. . . . . . . . . . . . . . . . . 0531, 1074, 1609
Radio Shack . . . . . . . . . . . . . . . . . 1263
Realistic. . . . . . . . . . . . . . . . 0181, 0195
Rio . . . . . . . . . . . . . . . . . . . . . . . . . 1383
Sansui . . . . . . . . . . . . . . . . . . . . . . 0189
Sanyo . . . . . . . . . . . . . . . . . 0801, 1251
Scott . . . . . . . . . . . . . . . . . . 0163, 0322
Sharp. . . . . . . . . . . . . . . . . . . . . . . 0186
Sharper Image. . . . . . . . . . . . . . . . 1263
Sherwood . . . . . . . . . . . . . . 0491, 0502
Sonic Blue . . . . . . . . . . . . . . . . . . . 1383
Sony . . . . . . . . 1058, 1441, 1759, 0158,
. . . . . . . . . . . . 0474, 1349, 1406, 1442
Soundesign . . . . . . . . . . . . . . . . . . 0670
Stereophonics . . . . . . . . . . . . . . . . 1023
Sunfire . . . . . . . . . . . . . . . . . . . . . . 1313
Teac. . . . . . . . . . . . . . . . . . . 0463, 1074
Technics . . . . . 1308, 1518, 0039, 0309
Thorens . . . . . . . . . . . . . . . . . . . . . 1189
Toshiba . . . . . . . . . . . . . . . . . . . . . 1572
Victor . . . . . . . . . . . . . . . . . . . . . . . 0074
AMPLIFIER BRAND. . . . . . . . . . CODE
Aiwa . . . . . . . . . . . . . . . . . . . . . . . .0406
Bose . . . . . . . . . . . . . . . . . . . . . . . 0674
Carver . . . . . . . . . . . . . . . . . . . . . . 0269
Curtis Mathes . . . . . . . . . . . . . . . . .0300
Denon. . . . . . . . . . . . . . . . . . . . . . .0160
Durabrand . . . . . . . . . . . . . . . . . . . 1561
GE . . . . . . . . . . . . . . . . . . . . . . . . .0078
Harman/Kardon . . . . . . . . . . . . . . .0892
JVC. . . . . . . . . . . . . . . . . . . . . . . . .0331
Left Coast . . . . . . . . . . . . . . . . . . . 0892
Lenoxx. . . . . . . . . . . . . . . . . . . . . . 1561
Linn. . . . . . . . . . . . . . . . . . . . . . . . .0269
Luxman . . . . . . . . . . . . . . . . . . . . . 0165
Magnavox . . . . . . . . . . . . . . . . . . . 0269
Marantz . . . . . . . . . . . 0269, 0321, 0892
NEC. . . . . . . . . . . . . . . . . . . . . . . . 0264
Nakamichi . . . . . . . . . . . . . . . . . . . 0321
Optimus . . . . . . . . . . . . . . . . 0395, 0300
Panasonic . . . . . . . . . . . . . . 0308, 0521
Parasound . . . . . . . . . . . . . . . . . . . 0246
Philips . . . . . . . . . . . . . . . . . 0269, 0892
Pioneer . . . . . . . . . . . . . . . . 0013, 0300
Polk Audio . . . . . . . . . . . . . . 0269, 0892
RCA. . . . . . . . . . . . . . . . . . . . . . . . 0300
Realistic . . . . . . . . . . . . . . . . . . . . .0395
Sansui . . . . . . . . . . . . . . . . . . . . . . 0321
Shure. . . . . . . . . . . . . . . . . . . . . . . 0264
Sony . . . . . . . . . . . . . 0815, 0689, 0220
49
Wards . . . . . . . .0014, 0080, 0158, 0189
Yamaha . . . . . . . . . . . 0176, 0186, 1176
Yorx. . . . . . . . . . . . . . . . . . . . . . . . 0195
Zenith . . . . . . . . . . . . . . . . . . . . . . 0857
AUDIO BRAND . . . . . . . . . . . . . CODE
Aiwa. . . . . . . . . . . . . . . . . . . 0010, 0159
AudioSource . . . . . . . . . . . . . . . . . 0351
Cambridge Soundworks . . . . . . . . 0351
Carver . . . . . . . . . . . . . . . . . . . . . . 0351
Fisher . . . . . . . . . . . . . . . . . . . . . . 0052
Fosgate . . . . . . . . . . . . . . . . . . . . . 0259
Harmon/Kardon . . . . . . . . . . . . . . . 0477
JBL . . . . . . . . . . . . . . . . . . . . . . . . 0477
JVC . . . . . . . . . . . . . . . . . . . . . . . . 0073
KLH . . . . . . . . . . . . . . . . . . . . . . . . 0351
Magnavox . . . . . . . . . . . . . . . . . . . 0325
Nikko . . . . . . . . . . . . . . . . . . . . . . . 0376
Paramount Pictures. . . . . . . 0317, 0351
RCA. . . . . . . . . . . . . . . . . . . . . . . . 0056
SSI. . . . . . . . . . . . . . . . . . . . . . . . . 0317
Sansui . . . . . . . . . . . . . . . . . . . . . . 0325
Schneider . . . . . . . . . . . . . . . . . . . 0376
Sony . . . . . . . . . . . . . . . . . . 0010, 0576
Soundesign . . . . . . . . . . . . . . . . . . 0376
Yorx . . . . . . . . . . . . . . . . . . . . . . . . 0376
SET TOP BOX BRAND . . . . . . . CODE
Panasonic . . . . . . . . . . . . . . . . . . . 1120
Pioneer . . . . . . . . . . . . . . . . . . . . . 1010
Princeton . . . . . . . . . . . . . . . 0113, 0295
Samsung . . . . . . . . . . . . . . . . . . . . 1190
Sensory Science . . . . . . . . . . . . . . 1126
Sharp. . . . . . . . . . . . . . . . . . . . . . . 1010
Sony . . . . . . . . . . . . . . . . . . . . . . . 0639
PERSONAL VIDEO RECORDER
BRAND . . . . . . . . . . . . . . . . . . . . CODE
Panasonic . . . . . . . . . . . . . . . . . . . 0616
Philips . . . . . . . . . . . . . . . . . . . . . . 0618
ReplayTV. . . . . . . . . . . . . . . 0614, 0616
SonicBlue . . . . . . . . . . . . . . 0614, 0616
Sony . . . . . . . . . . . . . . . . . . . . . . . 0636
Tivo . . . . . . . . . . . . . . . . . . . 0618, 0636
THE REMOTE CONTROL
NSC . . . . . . . . . . . . . . . . . . . . . . . . 0063
Novaplex . . . . . . . . . . . . . . . . . . . . 0618
Oak . . . . . . . . . . . . . . . . . . . . . . . . 0019
Optimus . . . . . . . . . . . . . . . . . . . . . 0021
Pace . . . . . . . . . . . . . . . . . . 0237, 1877
Panasonic . . . . . . . . . 0000, 0021, 0107
Panther . . . . . . . . . . . . . . . . . . . . . 0637
Paragon. . . . . . . . . . . . . . . . . . . . . 0000
Philips . . . . . . . . . . . . . . . . . 0305, 0317
Pioneer. . . . . . 0023, 0025, 0031, 0153,
. . . . . . . . . . . . 0144, 0533, 0877, 1877
Popular Mechanics . . . . . . . . . . . . 0400
Pulsar . . . . . . . . . . . . . . . . . . . . . . 0000
Quasar . . . . . . . . . . . . . . . . . . . . . .0000
RCA . . . . . . . . . . . . . . . . . . . . . . . . 0021
RadioShack. . . 0015, 0315, 0797, 0883
Recoton . . . . . . . . . . . . . . . . . . . . . 0400
Regal . . . . . . . . . . . . .0020, 0273, 0279
Rembrandt . . . . . . . . . . . . . . . . . . . 0011
Runco . . . . . . . . . . . . . . . . . . . . . . .0000
SL Marx . . . . . . . . . . . . . . . . . . . . . 0040
Samsung . . . . . . . . . . . . . . .0040, 0144
Scientific Atlanta. . . . . . . . . 0877, 0008,
. . . . . . . . . . . . . . . . . 0017, 0477, 1877
Signal . . . . . . . . . . . . . . . . . 0015, 0040
Signature . . . . . . . . . . . . . . . . . . . . 0011
Sony . . . . . . . . . . . . . . . . . . . . . . . 1006
Sprucer . . . . . . . . . . . . . . . . . . . . . 0021
Starcom . . . . . . . . . . . . . . . . 0003, 0015
Stargate. . . . . . . . . . . 0015, 0040, 0797
Starquest . . . . . . . . . . . . . . . . . . . . 0015
Supercable . . . . . . . . . . . . . . . . . . 0276
Supermax . . . . . . . . . . . . . . . . . . . 0883
TFC . . . . . . . . . . . . . . . . . . . . . . . . 0310
TV86 . . . . . . . . . . . . . . . . . . . . . . . 0063
Tandy. . . . . . . . . . . . . . . . . . . . . . . 0258
TeleCaption . . . . . . . . . . . . . . . . . . 0221
Teleview. . . . . . . . . . . . . . . . . . . . . 0040
Timeless . . . . . . . . . . . . . . . . . . . . 0040
Tocom . . . . . . . . . . . . . . . . . 0012, 0013
Torx . . . . . . . . . . . . . . . . . . . . . . . . 0003
Toshiba . . . . . . . . . . . . . . . . . . . . . 0000
Tristar . . . . . . . . . . . . . . . . . . . . . . 0883
Tusa. . . . . . . . . . . . . . . . . . . . . . . . 0015
Unika . . . . . . . . . . . . . . . . . . 0022, 0153
Universal . . . . . . . . . . 0022, 0153, 0191
V2 . . . . . . . . . . . . . . . . . . . . . . . . . 0883
ViewMaster . . . . . . . . . . . . . . . . . . 0883
Viewstar. . . . . . . . . . . . . . . . 0063, 0258
Vision. . . . . . . . . . . . . . . . . . . . . . . 0883
Vortex View . . . . . . . . . . . . . . . . . . 0883
Zenith . . . . . . . 0000, 0054, 0525, 0899
Zentek . . . . . . . . . . . . . . . . . . . . . . 0400
OSD (On-Screen Display)
1. Press MENU on the remote control to display the different features on your HITACHI LCD TV.
2. Use the CURSOR PAD to navigate to a different menu item.
3. Press EXIT on the remote control to quickly exit from a menu.
4. Press the A/V NET button on the remote control to access the AV Network menu to
control external components.
This part of the screen shows
which selections are available.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Power Swivel
SEL
Sel.
This part of the screen
shows which Remote
Control buttons to use.
ON-SCREEN DISPLAY
Move
50
OSD (On-Screen Display)
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Video
Black Enhancement
Contrast Mode
Back Light
Reset Video Settings
Color Management
Color Decoding
Auto Color
Audio
Aspect
Noise Reduction
Auto Movie Mode
The AUTO COLOR function automatically monitors and adjusts the
color to maintain constant color levels even after a program or channel
changes. It also maintains natural flesh tones while preserving fidelity
of background colors.
Reduces conspicuous noise in the picture.
Turn ON/OFF the 3:2 Pulldown detection feature.
Treble
Bass
Balance
Dynamic Bass
Matrix Surround
Audio Source
Internal Speakers
Auto Noise Cancel
Perfect Volume
Language
Digital Output
DRC
Adjust the treble.
Adjust the bass.
Adjust the balance.
Select settings (Off, Low, Medium, High).
Select Matrix Surround (On, Off).
Select between three Audio Sources.
Select internal or external speakers.
Eliminates the noise between stations.
Adjust volume in fixed setting.
Select Language options if available.
Select Optical Output options.
Select Dynamic Range Compression to ON or OFF.
4:3 Standard
4:3 Expanded
4:3 Zoom 1
4:3 Zoom 2
16:9 Standard
16:9 Zoom
Choose the picture format aspect ratio.
The Language, Digital Output, and the Dynamic Range Compression feature of the Audio OSD are only available for
Digital channels.
51
ON-SCREEN DISPLAY
NOTE:
Select between the two picture modes; Day and Night.
Adjust contrast.
Adjust brightness.
Adjust color.
Adjust tint.
Adjust sharpness.
Set this to High for less intense color with more blue, set to Medium
for natural color, set to Standard for standard colors or Black and
White for more reddish color.
Adjust shadow detail in dark screens.
Adjust Contrast automatically.
Adjust the Back Light.
Choose the Reset Video settings.
Adjust and balance individual colors to make either deeper or more
pure according to preference.
Adjust the percentage of Red, Green and Color according to preference.
OSD (On-Screen Display)
Channel
Manager
Locks
Set the Antenna
Auto Channel Scan
Signal Meter
Channel List
Set Antenna settings.
Set Auto Channel Scan.
Access Signal Meter.
Set Channel List.
Change Access Code
Engage Lock
Movie Ratings
Change Lock access code.
Choose to lock channel, video input, and/or front panel.
Block various types of movies and video types based on motion
picture ratings.
Block various types of movies and television programming based on a
parental guide ratings.
Block various types of movies and television programming based on
the Canadian ratings system.
Block various types of movies and television programming based on
the Canadian French ratings system.
TV Ratings
Canadian Ratings (ENG)
Canadian Ratings (FRN)
Timers
Setup
Power
Swivel
ON-SCREEN DISPLAY
NOTES:
1.
2.
Set the Clock
Set Sleep Timer
Set Day/Night Timer
Set Event Timer
Set Timer Recording
Set Clock Settings.
Set Sleep Timer intervals (30 min. intervals, 00:30-3:00).
Set Day/Night picture mode settings.
Set viewing reservation for TV programs.
Set Timer Recording for IEEE 1394 devices.
Menu Preference
Screen Saver
Set The Inputs
Set Black Side Panel
Set Closed Captions
Set Monitor Out
CableCARD Info
Set AV Control
Upgrades
Set Stand-By Mode
Choose English, French, or Spanish text.
Set Screen Saver to prevent screen burn.
Label Video Inputs , VCR, DVD, etc.
Set the gray side bars on/off when watching 4:3 signals in standard mode.
Feature to display dialogue/text.
Set Monitor Out source.
Select to access CableCARD information.
Select to set RS232C feature.
Select to upgrade TV software.
Set the IEEE 1394 function in stand by.
Unlocked
Locked
Power Swivel enabled. Control the motorized stand.
Power Swivel disabled.
The Signal Meter feature of the Channel Manager OSD is only available for Digital signals.
The CableCARD information feature of the Setup OSD is only available when a CableCARD from your cable
operator is installed in the rear panel of the Audio Video Control Center (AVC).
52
VIDEO
Video
Select VIDEO to adjust picture settings and improve picture quality. You can independently customize each of the
Video Inputs to your preference to increase viewing performance and pleasure depending upon the video program
being viewed. If RESET is selected, only the selected input will reset to initial conditions.
Picture Mode
Use this function to choose from automatic picture settings to optimize your TV’s performance.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Power Swivel
Move
Video
SEL
Sel.
ANT A/B
Picture Mode
Day
Night
100%
Contrast
Brightness
50%
Color
50%
Tint
Sharpness
50%
Color Temperature
High
Black Enhancement
Middle
Contrast Mode
Back Light
Dynamic
Picture Mode
100%
Next/Prev
Reset Video Settings
Move
SEL
Day
Select
Night
SEL Return
Return
Use CURSOR PAD F or E to highlight and select Picture Mode settings.
Day
Night
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Black Enhancement
Contrast Mode
Back Light
Auto Color
Noise Reduction
Color Management
(Set User Colors)
Auto Movie Mode
(TV/Cinema Detection)
100%
50%
50%
50%
50%
High
Low
Dynamic
100%
Off
Low
Off
91%
53%
25%
50%
40%
Standard
Off
Normal
50%
Off
Off
Off
Off
On
Reset
Reset the video
menu settings on
current input to the
Day or Night
conditions depending
on the selected
VIDEO mode.
Press EXIT to quit menu or select PICTURE MODE to return to previous menu.
53
ON-SCREEN DISPLAY
Function
VIDEO
Video
Video
Contrast
Aspect
Chan. Manager
Locks
Day
Night
100%
Brightness
50%
Color
50%
Tint
Timers
Setup
Power Swivel
Move
ANT A/B
Picture Mode
Audio
SEL
Sel.
Sharpness
50%
Color Temperature
High
Black Enhancement
Middle
Contrast Mode
Back Light
Dynamic
100%
Reset Video Settings
Move
SEL
Return
Use the CURSOR PAD G or H to highlight the function to be adjusted.
Press down on CURSOR PAD to select the function settings.
Press the CURSOR PAD F or E to adjust the function.
Press MENU to return to main menu.
Press EXIT to quit menu.
Contrast
Brightness
Use this function to adjust overall picture brightness.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear natural.
Sharpness
Color Temperature
Black Enhancement
ON-SCREEN DISPLAY
Use this function to change the contrast between black and white levels in the picture.
Use this function to adjust the amount of fine detail in the picture.
Set this to High for cooler color with more blue, set to Medium for more natural color, set to Standard for
accurate color or set to Black/White for more reddish color.
Use this function to enhance the shadow detail in dark scenes using the settings off, low, middle and high.
NOTES: 1. If CONTRAST is selected, you are adjusting CONTRAST. The additional menu items BRIGHTNESS, COLOR, TINT,
and SHARPNESS can be selected and adjusted in the same manner.
2. It may be necessary to adjust TINT to obtain optimum picture quality when using the COMPONENT VIDEO Y-PBPR
input jacks.
Contrast Mode
Back Light
Use this function to choose between 3 Contrast Mode settings. Set to Dynamic for darker images more
in the level of Black, set to Normal for a balanced White to Black level, and set to Auto for automatic
Contrast selection.
Use this function to adjust the amount of Back Light.
54
VIDEO
Reset Video
Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO
mode.
Video
Video
ANT A/B
Day
Picture Mode
Night
Picture Mode
100%
Contrast
Select
“Reset”
Brightness
50%
menu
Color
50%
original
Settings
to
on
factory
Tint
return
this
the
input
Video
to
the
settings.
Reset
Sharpness
50%
Color Temperature
High
Black Enhancement
Middle
Move
Dynamic
Contrast Mode
SEL
Return
100%
Back Light
Reset Video Settings
Move
SEL
Select
Use CURSOR PAD to highlight functions.
Press the SELECT button to select Reset Video Settings.
Use the CURSOR PAD H to access other video settings.
You can customize each of the Video Inputs to your preference to increase viewing performance and pleasure, depending upon the
video program being viewed. If RESET is selected, only the selected Input will reset to the initial conditions as explained above.
If RESET is selected in Video:1 Input, only Video:1 Input will return to factory conditions.
Video
Video
ANT A/B
Day
Picture Mode
Contrast
ANT A/B
Color Management
Night
Color Decoding
100%
Brightness
50%
Auto Color
Off
Color
50%
Noise Reduction
Low
Auto Movie Mode
Off
Tint
Sharpness
Move
50%
Color Temperature
High
Black Enhancement
Middle
SEL
Select
Dynamic
Contrast Mode
100%
Back Light
Reset Video Settings
Move
SEL
Select
Color Management
Video
Video
Color Management
Color Management
Color Decoding
Auto Color
Off
Auto Movie Mode
Off
Noise Reduction
Move
SEL
Select
Set User Colors
Low
Phase
Gain
Magenta
50%
50%
Yellow
50%
50%
Red
Green
Cyan
Blue
Reset
Move
50%
50%
50%
50%
50%
50%
50%
50%
SEL
Return
Use the CURSOR PAD to highlight function.
Press the SELECT button to select User Colors setting. When the function has a “A” in the box, it is ON.
Press the CURSOR PAD F, E, H, G, to highlight and adjust individual colors.
Use the CURSOR PAD to highlight and select “Reset” to return all colors to default settings.
NOTE:
When the Set User Colors box is not checked , the listed colors will be grayed out.
55
ON-SCREEN DISPLAY
Use this function to adjust and balance the listed individual colors to make them either deeper or more
pure depending on the user’s preference. Adjust the GAIN settings to make the color brighter (+) or
darker (-). Adjust the PHASE settings to make the colors deeper (+) or normal (-) to match real life colors.
VIDEO
Color Decoding
Use this function to adjust and balance the percentage of Red, Green and Blue according to the user’s
preference in each of the four color temperature settings. Use TINT to adjust flesh tones so they appear
natural.
Video
Video
Color Decoding
Color Management
Color Decoding
Auto Movie Mode
SEL
Red
Low
Noise Reduction
Move
RGB
Off
Auto Color
Off
Select
R
Green
G
B
50%
Color
50%
Tint
Move
50%
Reset
SEL
Return
Use CURSOR PAD to highlight function.
Press down to select from 4 menu items.
Press CURSOR PAD F, E, H, G, to highlight and adjust Red, Green, Color and Tint.
Use CURSOR PAD to highlight and select “Reset” to return all settings to default.
NOTE:
Color Decoding settings are independently stored in each of the 4 Color Temperature settings.
Auto Color
NOTE:
The AUTO COLOR function automatically monitors and adjusts the color to maintain constant color levels
even after a program or channel changes. It also maintains natural flesh tones while preserving fidelity of
background colors.
When using Component or DVI-HDTV input, Auto Color will not be available (grayed out).
Noise Reduction
Auto Movie Mode
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without
degrading picture quality. Set NOISE REDUCTION to OFF if the TV experiences picture blocking.
The Auto Movie Mode function turns ON or OFF the 3:2 PULLDOWN DETECTION SPECIAL FEATURE.
Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields
like video. When film is transferred to video for television viewing, the disparity between the two frame rates
must be reconciled. This involves a process known as 3:2 pulldown.
When Auto Movie Mode is turned ON from the VIDEO menu, your Hitachi LCD Television will activate the
circuitry for this special feature to improve video performance when watching film based sources.
ON-SCREEN DISPLAY
NOTES:
1. When using Progressive Scan Component or HDMI OR DVI input (Ex. 480p, 720p), Auto Movie Mode will not be
available (grayed out). Please see table below for additional information.
32”
ANT A/B, VIDEO, 480i
480p/720p/1080i
AVAILABLE
GRAYED OUT
2. All Video settings are independent of each other based on it’s input (ANT A/B, Input 1~5, Photo Input).
56
AUDIO
Audio
Select AUDIO to adjust the TV to your preference and to improve the sound quality.
Audio
Video
Audio
Aspect
Treble
50%
Bass
50%
Balance
Chan. Manager
Locks
Dynamic Bass
Medium
Matrix Surround
Off
Timers
Audio Source
Stereo
Setup
Internal Speakers
On
Power Swivel
Auto Noise Cancel
Off
Perfect Volume
Off
Move
SEL
Sel.
Move
SEL
Return
Press CURSOR PAD G, H, to select menu item.
Press CURSOR PAD F or E to adjust the function.
Press EXIT to quit the MENU, or select Audio to return to the main menu.
NOTE:
If TREBLE is selected you are adjusting treble. The additional menu items Bass and Balance can be selected and
adjusted in the same manner.
Treble
This function controls the high frequency audio to all speakers.
Bass
This function controls the low frequency audio to all speakers.
Balance
This function will control the left to right balance of the LCD TV internal speakers.
Dynamic Bass
Matrix Surround
Audio Source
This function complements and enhances bass performance.
The Matrix Surround features the spacious sound effects of a stadium that can be turned ON or OFF.
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural
sound) used when receiving a weak stereo broadcast or 2nd Audio Prog (SAP) which may be a secondary
language, weather report, etc. The sources received will be displayed at the top right edge of the TV. The
source you select will be displayed above the sources received. See example below for each selection
when both stereo and second audio are received (monaural is always received).
STEREO SELECTED
SAP SELECTED
Internal Speakers
Auto Noise Cancel
Perfect Volume
3:32 PM
Ant A 10
SAP
R
MONO SELECTED
3:32 PM
Ant A 10
Mono
R
This function is useful when setting up the external speakers. If you prefer to use only speakers from a
separate stereo system, turn this feature OFF. When set to OFF, the LCD TV speakers and the sub-woofer
output are OFF. Also, set to OFF, if you prefer to use only your head-phones.
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will
automatically eliminate the audio for that channel.
This function will automatically adjust volume so each channel and input has the same average volume
level.
57
ON-SCREEN DISPLAY
3:32 PM
Ant A 10
Stereo
R
AUDIO
Use the functions below if your TV is connected to an amplifier/receiver with optical digital input with Dolby Digital or PCM decoder
capabilities.
Audio
Audio
Treble
50%
Language
1 [English ]
Bass
65%
Digital Output
Dolby Digital
Balance
L
Dynamic Bass
Medium
Matrix Surround
Off
Audio Source
Stereo
Internal Speakers
On
Auto Noise Cancel
Off
Language
Digital
Output
Move
Move
Select
SEL
Return
Off
Perfect Volume
Move
Off
DRC
R
SEL
Return
Some programs transmit more than one DTV language option. Most will have English as a default language. The
language function will allow you to select up to 4 language options (if available).
This function allows you to select between Dolby® Digital and PCM.
Dolby® Digital - Select this feature if the TV is connected to an amplifier/receiver with a Dolby® Digital only decoder; it
will provide six independent soundtrack channels through the optical output jack (Digital Audio).
PCM - Select this feature if the TV is connected to an amplifier/receiver with a PCM only decoder; it will provide two
independent soundtrack channels through the optical output jack (Digital Audio).
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
DRC
Dynamic Range Compression - Use this function to compress the range of sound volume. By compressing the range
of sound volume, it is possible not only to suppress the output of loud sound at night but also to raise the volume of
low sound. This is only effective when the TV is connected via the optical out (digital audio) to an amplifier/receiver
with a Dolby® Digital decoder. The default setting is ON.
Use the CURSOR PAD F, E to select the chosen options.
ON-SCREEN DISPLAY
NOTE: These functions are only available when viewing digital programs.
58
ASPECT
Aspect
Use this function to select the Picture Format Aspect Ratio.
Aspect
Video
Mode
16:9 Standard
4:3 Standard
4:3 Zoom1
Audio
Aspect
Chan. Manager
Auto Aspect
Locks
Timers
Vertical Position
Setup
Move
Power Swivel
Move
SEL
16:9 Zoom
4:3 Expanded
4:3 Zoom2
SEL
Return
0
Sel.
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Press CURSOR PAD G, H, to select menu item.
Press the Select button to select. A “A” in the box indicates that the feature is ON.
NOTES:
1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on composite video, S-Video, and 480i component signals.
3. See page 29 for Aspect Mode availability.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press CURSOR PAD G, H, to select menu item.
Press CURSOR PAD F or E to adjust the function.
Press EXIT to quit the MENU, or select Aspect to return to the main menu.
NOTE:
Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
ON-SCREEN DISPLAY
59
Chan.
Manager
CHANNEL MANAGER
Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel
List.
Video
Chan. Manager
Audio
Set The Antenna
Auto Channel Scan
Aspect
Signal Meter
Chan. Manager
Channel List
Locks
Move
Timers
Return
SEL
Setup
Power Swivel
Move
Sel.
SEL
Press CURSOR PAD G, H to highlight function, the press the SELECT button to select.
Set The Antenna
This feature will select Antenna options.
Chan. Manager
Chan. Manager
Set The Antenna
Set The Antenna
Auto Chan. Scan
( ) Connect Cable to Ant A and
Air to Ant B
Signal Meter
( ) Connect Cable to Ant A only
Channel List
Move
SEL
( ) Connect Air to Ant A only
Select
Cable Source
Cable(1)
Move
SEL
Cable(2)
Return
Press CURSOR PAD G, H to highlight function, the press the SELECT button to select.
NOTE:
When a CableCARD is installed, antenna settings will be set automatically to “Connect Cable to Ant A only”.
Auto Channel Scan
This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.
ON-SCREEN DISPLAY
Chan. Manager
Chan. Manager
Set The Antenna
Auto Chan. Scan
Ant A
Auto Chan. Scan
Auto Channel Scan
Signal Meter
Start
Channel List
Move
SEL
Clear
Select
Ant B
Auto Channel Scan
Start
Move
SEL
Clear
Return
Press CURSOR PAD G, H, F, E to highlight Ant A or Ant B.
Press CURSOR PAD F, E to highlight the Start or Clear option.
Press the SELECT button to start Auto Channel Scan.
NOTE:
When a CableCARD is installed, Auto Channel Scan will not be available since channels will be fixed based on what was
agreed upon by you and your cable operator.
60
CHANNEL MANAGER
Signal Meter
Select Signal Meter when using an indoor or outdoor antenna. This feature will show the signal strength and peak
values of the Antenna signal to help you adjust your antenna to optimize signal reception.
Chan. Manager
Chan. Manager
Set The Antenna
Signal Meter
Auto Chan. Scan
Signal Meter
Channel List
Move
Select
SEL
Channel
:
3-
Strength
:
1
Peak
:
1
Close
Move
SEL
Return
Use the CURSOR PAD and the SELECT button to highlight and select “close” to exit.
NOTE:
The Signal Meter will not be available (grayed out) when watching analog channels.
Channel List
This function allows you to review which channels are labeled (CH ID), which have been added to Channel
Memory (SCAN), which are protected by LOCK and which are your Favorite (FAV) Channels.
Chan. Manager
Channel List (Cable)
Set The Antenna
Auto Chan. Scan
FAV
FAV
Signal Meter
Channel List
Move
SEL
Select
Move
CH#
Scan
CH ID
3
4
5
6
7
8
9
10
On
On
On
On
On
On
On
On
-------------------------------------------------
Lock
/ SEL Return
Use the CURSOR PAD to navigate the Channel List.
Press the CURSOR PAD (G, H) to select On or Off on the Scan column.
Press the EXIT button to return to normal viewing.
NOTE:
61
ON-SCREEN DISPLAY
When a CableCARD is installed, the Channel List will be dependent on channels agreed upon by you and your cable
operator.
LOCKS
Locks
This function will block out the picture and sound of the selected channel or video input.
It can also be used to keep the TV from being viewed for a scheduled time period that you set.
The code to enter the Locks feature is a four digit access code number. The factory preset code is 0000.
Use the number buttons to enter the access code.
Video
Audio
Aspect
Please Enter Access Code
Chan. Manager
Locks
[ - - - - ]
Timers
Setup
[# Keys] Enter Code
Power Swivel
Move
Sel.
SEL
0
0
0
0
Locks
Change Access Code
Engage Lock
Movie Ratings
TV Ratings
Canadian Ratings (Eng)
Canadian Ratings (Frn)
Move
SEL
Return
Use the CURSOR PAD G or H to highlight function and then press the SELECT button.
To change the access code number, select Change Access Code. Enter a new four digit number.
Select CHANGE ACCESS CODE to change the factory preset code (0000) to your preference.
When ENGAGE LOCK is selected, SET CHANNEL LOCK, SET INPUT LOCK, and SET FRONT PANEL LOCK can be set individually.
When SET CHANNEL LOCK is turned on, the picture and sound for the chosen channel will be blocked out.
ON-SCREEN DISPLAY
When SET INPUT LOCK is turned on, the picture and sound for all video inputs and the picture and sound for channels 3, 4 will be
blocked out.
When FRONT PANEL LOCK is turned on, all buttons on the Front Panel will be deactivated, except the Power button.
When MOVIE RATINGS is selected, you can block various types of movies and video tapes based on motion picture ratings. Picturein-Picture will also be blocked automatically (see page 63).
When TV RATINGS is selected, various types of television programming based on a parental guide ratings will be blocked.
Picture-in-Picture will also be blocked automatically (see page 64).
Use CANADIAN RATINGS to block various types of movies and television programs based on the two rating systems used in
Canada that you feel may be inappropriate due to its content (see pages 65-66).
If you forget your access code, use the factory code 7777 to erase your key number. This will reset the access code number back to
the factory preset 0000.
Press EXIT to quit the menu.
NOTE:
If MOVIE/TV Ratings Lock function settings are ON, SURF will be deactivated.
62
LOCKS
Movie Ratings
Use MOVIE RATINGS to prevent viewing of any movie that you feel may be inappropriate due to
its content.
Locks
Locks
Movie Ratings
Change Access Code
Engage Lock
Status
Not Rated:
TV Time Lock
G:
Movie Ratings
PG:
TV Ratings
PG-13:
Canadian Ratings (Eng)
R:
Canadian Ratings (Frn)
Move
SEL
Select
NC-17:
X:
Move
SEL
Return
Use the CURSOR PAD G or H to select the MOVIE RATING category that you want to block.
Press SELECT to block the MOVIE RATING that you have selected. Once rating is selected, for example PG-13, all
movies rated PG-13 and higher (R, NC-17, and X) will be blocked.
Press EXIT to quit the menu or select MOVIE RATING to return to the previous menu.
Motion Picture Ratings Chart
G
PG
PG-13
R
General audiences. All ages
admitted.
Parental guidance suggested.
Some material may not be suitable
for children.
Parents strongly cautioned. Some
material may be inappropriate for
children under 13.
Restricted. Under 17 requires
accompanying parent or adult
guardian.
No one 17 and under admitted.
NC-17
NOT RATED (NR)
NOTES:
1.
2.
3.
Adults only
Contains no rating. Not Rated
(NR) and Not Applicable (NA)
programs. Movie has not been
rated or ratings do not apply.
A movie rating is dependent upon the movie that is viewed. If the movie does not carry a rating, the TV will not block
it.
Blocking “NOT RATED (NR)” programs may block emergency programming, sports, news, public service
announcements, religious programs and weather.
If a CableCARD is installed, your cable operator may provide an Emergency Alert System (EAS) message in the
event of a local or national emergency with the purpose of alerting the general public. When you receive such
messages, the LCD Television will immediately tune to an EAS channel as directed by the EAS message.
Please be advised that if the EAS channel is blocked using the Locks feature, you will not be able to tune to that
channel.
63
ON-SCREEN DISPLAY
X
LOCKS
TV Ratings
Use TV RATINGS to prevent the viewing of any TV program that you feel may be inappropriate
due to its content.
Locks
Locks
TV Ratings
Change Access Code
Sub Category
Engage Lock
Status
TV Time Lock
D
V
FV
TV-Y7:
TV Ratings
Canadian Ratings (Eng)
TV-G:
Canadian Ratings (Frn)
TV-PG:
SEL
S
TV-Y:
Movie Ratings
Move
L
Select
TV-14:
TV-MA:
Move
SEL
Return
Use the CURSOR PAD G or H to highlight the category that you want to block.
Press select to block the TV RATINGS that you have selected.
Press EXIT to quit the menu or select TV RATINGS to return to the previous menu.
TV Parental Guide Ratings Chart
ON-SCREEN DISPLAY
N/A
None.
TV-Y
All children. The themes and elements in this
program are specifically designed for a very
young audience, including children from ages
2-6.
TV-Y7
Directed to older children. Themes and
elements in this program may include mild
physical or comedic violence, or may frighten
children under the age of 7.
TV-G
General audience. It contains little or no
violence, no strong language, and little or no
sexual dialogue or situations.
TV-PG
Parental guidance suggested. The program
may contain infrequent coarse language,
limited violence, some suggestive sexual
dialogue and situations.
TV-14
Parents strongly cautioned. This program
may contain sophisticated themes, intense
sexual situation, more intense violence and
intensely suggestive dialogue.
TV-MA
Mature audiences only. This program may
contain mature themes, indecent language,
graphic violence, and explicit sexual content.
FV
Fantasy Violence
V
Violence
S
Sexual Situation
L
Adult Language
D
Sexually Suggestive Dialogue.
64
NOTES:
1.
If you Block TV-14D, you will still permit
TV MA programs; If you block TV-14DV,
you will automatically block TV-MAV
programs, but you will still permit TVMALS programs. This means that the
TV will block violence in TV-14 and
higher (TV-MA), but not language and
sex.
2.
TV program ratings are dependent on
the broadcaster. If the program is not
rated, the TV will not block it.
3.
If a CableCARD is installed, your cable
operator may provide an Emergency
Alert System (EAS) message in the
event of a local or national emergency
with the purpose of alerting the general
public.
When you receive such
messages, the LCD Television will
immediately tune to an EAS channel as
directed by the EAS message. Please
be advised that if the EAS channel is
blocked using the Locks feature, you will
not be able to tune to that channel.
LOCKS
Canadian Ratings
(Eng)
Use Canadian Ratings (Eng) to block any type of movie and television program in Canada that
you feel might be inappropriate in its content.
Locks
Locks
Canadian Ratings (Eng)
Change Access Code
Status
Engage Lock
C:
TV Time Lock
C8+:
Movie Ratings
G:
TV Ratings
Canadian Ratings (Eng)
PG:
Canadian Ratings (Frn)
14+:
Move
SEL
Select
18+:
Move
SEL
Return
Use the CURSOR PAD G or H to select the CANADIAN RATINGS (Eng) category that you want to block.
Press SELECT to set the CANADIAN RATINGS (Eng) that you have selected. Once rating is selected, for example C8+,
all movies and television programs rated C8+ and higher (G, PG, 14+ and 18+) will be blocked automatically.
Press EXIT to quit menu.
Canadian Ratings English Chart
C
C8+
G
Programming intended for children under age 8 - Violence Guidelines; Careful
attention is paid to themes, which could threaten children’s sense of security and wellbeing. There will be no realistic scenes of violence. Depictions of aggressive
behaviour will be infrequent and limited to portrayals that are clearly imaginary,
comedic or unrealistic in nature. Other Content Guidelines: There will be no offensive
language, nudity or sexual content.
Programming generally considered acceptable for children 8 years and over to
watch on their own - Violence Guidelines: Violence will not be portrayed as the
preferred, acceptable, or only way to resolve conflict; or encourage children to imitate
dangerous acts which they may see on television. Any realistic depictions of violence
will be infrequent, discreet, of low intensity and will show the consequences of the acts.
Other Content Guidelines: There will be no profanity, nudity or sexual content.
General Audience - Violence Guidelines: Will contain very little violence, either
physical or verbal or emotional. Will be sensitive to themes which could frighten a
younger child, will not depict realistic scenes of violence which minimize or gloss over
the effects of violent acts. Other Content Guidelines: There may be some inoffensive
slang, no profanity and no nudity.
14+
Programming contains themes or content which may not be suitable for viewers
under the age of 14 - Parents are strongly cautioned to exercise discretion in
permitting viewing by pre-teens and early teens. Violence Guidelines: May contain
intense scenes of violence. Could deal with mature themes and societal issues in a
realistic fashion. Other Content Guidelines: May contain scenes of nudity and/or sexual
activity. There could be frequent use of profanity.
18+
Adult - Violence Guidelines: May contain violence integral to the development of the
plot, character or theme, intended for adult audiences. Other Content Guidelines: May
contain graphic language and explicit portrayals of nudity and/or sex.
65
ON-SCREEN DISPLAY
PG
Parental Guidance - Programming intended for a general audience but which may not
be suitable for younger children. Parents may consider some content inappropriate for
unsupervised viewing by children ages 8-13. Violence Guidelines: Depictions of
conflict and/or aggression will be limited and moderate; may include physical, fantasy,
or supernatural violence. Other Content Guidelines: May contain infrequent mild
profanity, or mildly suggestive language. Could also contain brief scenes of nudity.
LOCKS
Canadian Ratings
(Frn)
Use CANADIAN RATINGS (FRN) to block Canadian French programs according to various
program ratings that you feel might be inappropriate in its content.
Locks
Locks
Canadian Ratings (Frn)
Change Access Code
Status
Engage Lock
G:
TV Time Lock
8 ans+:
Movie Ratings
TV Ratings
13 ans+:
Canadian Ratings (Eng)
16 ans+:
Canadian Ratings (Frn)
18 ans+:
Move
SEL
Select
Move
SEL
Return
Use the CURSOR PAD G or H to highlight the category that you want to block.
Press SELECT to set the CANADIAN RATINGS (FRN) that you have selected.
Once rating is selected, for example 8 ans+, all movies and television programs rated 8 ans+ and higher will be
automatically blocked.
Press EXIT to quit menu or select the CURSOR PAD F to return to the previous menu.
ON-SCREEN DISPLAY
Canadian Ratings French Chart
G
General - Programming intended for audiences
of all ages. Contains no violence, or the
violence content is minimal or is depicted
appropriately with humor or caricature or in an
unrealistic manner.
8 ans +
8 + General - Not recommended for young
children - Programming intended for a broad
audience but contains light or occasional
violence that could disturb young children.
Viewing with an adult is therefore recommended
for young children (under the age of 8) who
cannot differentiate between real and imaginary
portrayals.
13 ans +
Programming may not be suitable for
children under the age of 13 - Contains either
a few violent scenes or one or more sufficiently
violent scenes to affect them. Viewing with an
adult is therefore strongly recommended for
children under 13.
16 ans +
Programming is not suitable for children
under the age of 16 - Contains frequent scenes
of violence or intense violence.
18 ans +
Programming restricted to adults - Contains
constant violence or scenes of extreme violence.
66
TIMERS
Timers
Select Timers to set your Clock, Sleep Timer, Event Timer and Day/Night Timer Recordings.
Timers
Video
Set The Clock
Audio
Set Sleep Timer
Aspect
Set Day/Night Timer
Chan. Manager
Set Event Timer
Locks
Set Timer Recording
Timers
Move
Return
SEL
Setup
Power Swivel
Move
Set The Clock
SEL
Sel.
The Clock must be adjusted before you can use the “Set Event Timer” or Day/Night Timer” feature.
Timers
Timers
Set The Clock
Set The Clock
Set Sleep Timer
Time Zone:
Set Day/Night Timer
Set Event Timer
Set Timer Recording
Move
SEL
PST
MST
CST
AKST
HST
ATL
EST
Daylight Saving Corrections
Select
Time:
Move
2:53 PM Jun 28 2004
SEL
Return
Use the CURSOR PAD G, H, F, E to highlight the chosen Time Zone settings.
Press the SELECT button to select.
If you observe daylight savings, use CURSOR PAD to highlight “Daylight Saving Correction” and press the SELECT button to select.
Use the CURSOR PAD G, H, F, E to highlight the current time (hour and minute), AM or PM, Month, Day, and Year.
Use the CURSOR PAD G, H to adjust settings.
Press the SELECT button to set the Time and Date.
Press EXIT to quit the menu.
When “Daylight Saving Correction” is checked “✓”, the TV will automatically calculate the clock adjustment for
Daylight Saving.
67
ON-SCREEN DISPLAY
NOTES:
TIMERS
Set Sleep Timer
Select this feature to set your Sleep Timer from 30 minutes to 3 hours (30 minute increments).
Timers
Timers
Set The Clock
Set Sleep Timer
Set The Clock
0:00
Set Sleep Timer
Set Day/Night Timer
Set Day/Night Timer
Set Event Timer
Set Event Timer
Set Timer Recording
Set Timer Recording
Move
Set
SEL
Move
SEL
0:30
Set
Press the CURSOR PAD E repeatedly to set your Timer from 0:00, 0:30, 1:00, 1:30, 2:00, 2:30 and 3:00.
Set Day/Night Timer
Select this feature to activate and set your TV’s Day/Night Picture Mode automatically.
Timers
Timers
Set The Clock
Set Day/Night Timer
Set Sleep Timer
Activate
Set Day/Night Timer
Set Event Timer
Set Timer Recording
Move
SEL
Select
Day Mode On
12:00 AM
Day Mode Off
12:00 AM
Move
ON-SCREEN DISPLAY
Use the CURSOR PADS and the SELECT button to activate the Day/Night Timer.
Use the CURSOR PADS to select Day Mode On and to set it’s timer.
Use the CURSOR PADS to select Day Mode Off and to set it’s timer.
68
SEL
Return
TIMERS
Set Event Timer
This function will automatically operate the TV viewing reservation of a program. If the clock is not set, you
can not use this function and the screen below will appear. The message on the screen will disappear after 3
seconds, then the screen automatically goes to the clock setup mode (see page 67).
Please Set Clock First.
Timers
Timers
Set The Clock
Set Event Timer
Set Sleep Timer
Event 1
--:-- AM
Event 2
--:-- AM
Set Event Timer
--:-- AM
Jan 1, 2004
Ant A --------
Set Timer Recording
SEL
7:31 PM
Jan 1, 2004
Ant A --------
Set Day/Night Timer
Move
--:-- AM
Event 3
Select
--:-- AM
--:-- AM
Jan 1, 2004
Ant A -------Event 4
--:-- AM
--:-- AM
Jan 1, 2004
Ant A -------Move
SEL
Return
Timers
Set Event Timer
Event 1
7:31 PM
--:-- AM
--:-- AM
Jan 1, 2004
Ant A -------Event 2
--:-- AM
--:-- AM
Jan 1, 2004
Ant A -------Event 3
--:-- AM
--:-- AM
Jan 1, 2004
Ant A -------Event 4
--:-- AM
--:-- AM
Jan 1, 2004
Ant A -------Move
SEL
On/Off
Return
NOTE:
1. When the INFO button is pressed, the Event Timer Icon will only display the current date ON/OFF timer.
2. The Off Timer will only activate if the TV was turned on by the On Timer and no channel selection was
made after this time. If you change the channel after the On Timer has been activated, the Off Timer will deactivate.
3. If no remote control button is pressed after viewing reservation is activated, the TV will automatically turn off after three
hours. Therefore, do not Set Event Timer for more than three hours if you do not plan to control your television with
the remote control.
CAUTION:
Do not use your TV as a deterrent when away from home by using the On and Off Timers. For safety, the TV
should be turned off when you are away from home.
69
ON-SCREEN DISPLAY
Use CURSOR PAD G, H to highlight Event 1, Event 2, Event 3, Event 4 and then press the SELECT button to select.
Use CURSOR PAD E, G, H to highlight and select START TIME Hour/Minute.
Use CURSOR PAD E, G, H to highlight and select START TIME AM/PM.
Use CURSOR PAD E, G, H to highlight and select FINISH TIME Hour/Minute.
Use CURSOR PAD E, G, H to highlight and select FINISH TIME AM/PM.
Use CURSOR PAD E to highlight the MONTH.
Use CURSOR PAD G to select a MONTH or CURSOR PAD H to select Daily, Weekly - Sunday to Monday. Use CURSOR PAD F to
return to MONTH.
Use CURSOR PAD E, G, H to highlight and select the DAY of the MONTH.
Use CURSOR PAD E, G, H to highlight and select the YEAR.
Use CURSOR PAD E, G, H to highlight and select Ant A or Ant B.
Use CURSOR PAD E, G, H or NUMBER buttons to set the channel the TV will tune into.
A “✓“ in the box means it is enabled.
TIMERS
Set Timer
Recording
Select this feature to set and record digital channels using your device connected to the IEEE 1394 jacks (ex.
D-VHS).
Timers
Timers
Set The Clock
Set Timer Recording
Record1 --:--AM
Set Sleep Timer
Record2 --:--AM
Set Event Timer
SEL
Select
Record3 --:--AM
SEL
DVHS1
--:--AM Jan.01, 2003
Ant A ------Move
DVHS1
--:--AM Jan.01, 2003
Ant A ------Record4 --:--AM
DVHS1
--:--AM Jan.01, 2003
Ant A -------
Set Timer Recording
Move
--:--AM Jan.01, 2003
Ant A -------
Set Day/Night Timer
DVHS1
Return
Use CURSOR PAD G, H to highlight Record 1, Record 2, Record 3 and then press CURSOR PAD to select.
Use CURSOR PAD E, G, H to highlight and select START TIME Hour/Minute.
Use CURSOR PAD E, G, H to highlight and select START TIME AM/PM.
Use CURSOR PAD E, G, H to highlight and select FINISH TIME Hour/Minute.
Use CURSOR PAD E, G, H to highlight and select FINISH TIME AM/PM.
Use CURSOR PAD E to highlight the MONTH.
Use CURSOR PAD G to select a MONTH or CURSOR PAD H to select Daily, Weekly - Sunday to Monday. Use CURSOR PAD G to
return to MONTH.
Use CURSOR PAD E, G, H to highlight and select the DAY of the MONTH.
Use CURSOR PAD E, G, H to highlight and select the YEAR.
Use CURSOR PAD E, G, H to highlight and select ANT C channel # to be recorded.
Use CURSOR PAD E, G, H to highlight and select 1394 Device to be used.
Press the SELECT button to return and highlight Record 1.
A “√“ in the box means it is enabled.
1. Set the Time and connect the IEEE1394 devices before using this feature.
2. The Timer Recording has priority over the Event Timer. If the Timer Recording is set at the same time as the Event
Timer or overlaps with each other, the TV will only perform the function of the Timer Recording.
ON-SCREEN DISPLAY
NOTES:
70
SETUP
Setup
Select SETUP when setting up your TV for the first time. Use the CURSOR PAD G or H on the remote to highlight
the function desired.
Setup
Video
Menu Preference
Audio
Screen Saver
Aspect
Set The Inputs
Chan. Manager
Set Black Side Panel
Locks
Set Closed Captions
Timers
Set Monitor Out
Setup
Move
SEL
Return
Power Swivel
Move
SEL
Sel.
Setup
Setup
Menu Preference
CableCARD Info.
Screen Saver
Set AV Control
Set The Inputs
Upgrades
Set Black Side Panel
Set Stand-By Mode
Set Closed Captions
Move
SEL
Return
Set Monitor Out
Move
SEL
Select
Use CURSOR PAD (G,H,F,E)to select the sub-menu of your choice.
Press the SELECT button to select.
Menu Preference
This feature will allow you to select any one of three different languages for all on-screen displays.
Video
Setup
Audio
Menu Preference
Aspect
Screen Saver
Set The Inputs
Chan. Manager
Set Black Side Panel
Locks
Set Closed Captions
Timers
Set Monitor Out
Setup
Move
Move
SEL
Setup
Menu Preference
Menu Preference
Set The Language
English
Français
Set The Language
English
Français
Español
Set The Menu Background
Shaded
Solid
SEL
Select
Sel.
Setup
Move
SEL
Set The Menu Background
Shaded
Solid
Return
Move
Use CURSOR PAD F , E to highlight the language of your choice.
Press SELECT to select the highlighted language.
Press EXIT to quit the menu.
71
SEL
Select
Español
ON-SCREEN DISPLAY
Power Swivel
SETUP
Menu Background
This function allows you to choose from two menu backgrounds.
Setup
Menu Preference
Set The Language
English
French
Spanish
Set The Menu Background
Shaded
Solid
Move
SEL
Select
Use CURSOR PAD F , E to highlight SET THE MENU BACKGROUND (shaded or solid), and the SELECT button to select the setting.
Press EXIT to quit the menu.
Select SOLID and background is visible (no picture can be seen behind menu screen), select SHADED and a light background is visible.
Screen
Saver
Continuous on-screen displays such as video games, stock market quotations, computer generated graphics,
and other fixed (non-moving) patterns can cause permanent damage to the LCD Television. Use the SCREEN
SAVER feature to hide screen burn.
Setup
Setup
Menu Preference
Screen Saver
Main Picture Moving
Screen Saver
Set The Inputs
Option 2
Set Closed Captions
Option 3
Set Monitor Out
Move
SEL
Off
Option 1
Set Black Side Panel
Return
Screen Wipe :
Image Power
Wipe
Max
Move
SEL
Medium
Min
Return
Use CURSOR PAD G , H to highlight Screen Saver’s Main Picture Moving options.
Press down on CURSOR PAD to select and EXIT to quit.
Option 1
The whole picture will shift every 20 minutes by two pixels.
ON-SCREEN DISPLAY
Option 2
The whole picture will shift every 40 minutes by two pixels.
Option 3
The whole picture will shift every 60 minutes by two pixels.
Screen Wipe
If pattern mark occurs, use Screen Wipe (White Field Signal) for at least 10 minutes to refresh any damage that may have occurred
from a pattern mark. Screen Wipe can resolve pattern mark to a certain degree, if caution is not used, permanent damage may occur.
Press the EXIT button to return to normal viewing.
Screen Saver Picture’s Movement
Image Power
This function allows you to choose Power Consumption reduction.
72
SETUP
Set The Inputs
Use this feature to give a name to any of the five video inputs.
Setup
Setup
Menu Preference
Set The Inputs
Screen Saver
Rename List
Video1
Video2
Video3
Video4
Video5
Set The Inputs
Set Black Side Panel
Set Closed Captions
Set Monitor Out
Move
SEL
AVR
CAM
CBL
CBL2
Reset
DVD
DVD2
DVD3
LD
PVR
PVR2
SAT
STB
STB2
VCR
VCR2
VCR3
Return
Video Power Save
Move
SEL
Return
Setup
Set The Inputs
Rename List
Video1
Video2
Video3
Video4
Video5
AVR
CAM
CBL
CBL2
Reset
DVD
DVD2
DVD3
LD
PVR
PVR2
SAT
STB
STB2
VCR
VCR2
VCR3
Video Power Save
Move
SEL
Return
Press CURSOR PAD G, H to highlight the name of the video inputs.
Press the SELECT button to select desired input name.
Select RESET to set video names to original factory preset condition.
NOTE:
The video input name will be displayed only when video input is displayed as main picture.
Video Power Save
Use this feature to reduce power consumption for video input when there is no video input signal. In RGB
mode, this feature will always be on.
Setup
Set The Inputs
Rename List
Video1
Video2
Video3
Video4
Video5
AVR
CAM
CBL
CBL2
Reset
Set The Inputs
DVD
DVD2
DVD3
LD
PVR
PVR2
SAT
STB
STB2
VCR
VCR2
VCR3
Video Power Save
Move
SEL
Rename List
Video1
Video2
Video3
Video4
Video5
AVR
CAM
CBL
CBL2
Reset
Video Power Save
Return
Move
Press CURSOR PAD H to highlight VIDEO POWER SAVE.
Press the SELECT button to select.
73
SEL
Return
DVD
DVD2
DVD3
LD
PVR
PVR2
SAT
STB
STB2
VCR
VCR2
VCR3
ON-SCREEN DISPLAY
Setup
SETUP
Video 2 Auto Link
Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to
input 2.
Setup
Setup
Set The Inputs
Video1
Video2
Video3
Video4
Video5
Rename List
AVR
CAM
CBL
CBL2
Reset
Auto Link
Auto
Set The Inputs
DVD
DVD2
DVD3
LD
PVR
PVR2
SAT
STB
Remote
Off
STB2
VCR
VCR2
VCR3
Video1
Video2
Video3
Video4
Video5
Video Power Save
Move
SEL
Rename List
AVR
CAM
CBL
CBL2
Reset
Auto Link
Auto
DVD
DVD2
DVD3
LD
PVR
PVR2
SAT
STB
Remote
Off
STB2
VCR
VCR2
VCR3
Video Power Save
Return
Move
SEL
Return
Use CURSOR PAD G , H, F, E then press the SELECT button to change AUTO LINK setting.
When AUTO is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is
convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR,
laserdisc, or DVD) and any of the buttons on your remote control is pressed.
Select Off to disable this function.
Press EXIT to quit the menu.
NOTES:
1.
2.
3.
Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To
do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described
above.
When using REMOTE mode, any remote control button will substitute for your video input device play button.
However, intended operation is for use with your VCR, laserdisc, or DVD play button.
If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after
three hours.
Set Black Side Panel
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in
Standard mode.
ON-SCREEN DISPLAY
Setting
Signal
NTSC/480i/480p
Aspect: 4:3 standard
1080i (4x3 source)
Aspect: 16:9 standard
1080i (4x3 source with
logo on corner
Aspect: 16:9 standard
NOTES:
Off
On
Gray
Black
Gray
Black Black
Gray
Black Black
Black
Recomended
Aspect
4x3
Gray
Expanded
4x3
Gray
Expanded
Auto 1 Auto 2
Gray
4x3
Expanded
1. To prevent screen burn when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3
signal with gray side bar.
2. Depending on received signals, some images and Closed Caption displays may be missing when the Black Side
Panel is set to Auto 1 or Auto 2.
74
SETUP
Set Closed Caption Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video
which are displayed on the TV screen. Your local TV program guide denotes these programs as
or
.
Setup
Setup
Menu Preference
Set Closed Captions
Caption Display
Off
On
Screen Saver
Set The Inputs
Set Black Side Panel
Set Closed Captions
Set Monitor Out
Move
SEL
Select
Text
4
Digital Captions
Move
Caption Display: On/Off will turn the
SEL
Set
Return
display on or off.
Auto will turn the
Caption Mode:
Auto
Analog Captions
Mode:
Captions
Channel:
1
2
3
display on when Mute/Soft Mute is on.
Captions is for the program you are viewing.
Text is for additional information such as news reports or a TV program guide. This information covers the entire
screen and viewing the TV program is not possible. Text may not be available with every
program.
CHANNEL:
1
2
3
4
is
is
is
is
used for the primary language (usually English).
sometimes used for a second language (may vary by region).
sometimes used for a third language (may vary by region).
sometimes used for a fourth language (may vary by region).
Use the CURSOR PAD G, H, F, E to highlight the function to change then press the SELECT button to select the function.
Press EXIT to quit menu or the CURSOR PAD F to return to previous menu.
Digital Captions: Set captions for digital programs. This function will help choose and set available language, font, size and style of
digital captions.
Digital Caption Font Style
Setup
Set Closed Captions
Analog Captions
Mode:
Captions
Channel:
1
2
3
Digital Captions
Move
SEL
Auto
4
Text
[HITACHI]
SET
Return
Move
SEL
Return
Use the CURSOR PAD G, H, F, E to highlight desired Digital Captions feature.
Press the SELECT button to select desired feature.
Press EXIT to quit menu or the CURSOR PAD F to return to previous menu.
NOTES:
1.
2.
3.
4.
5.
Depending on the source, some types of digital closed captions may not work with this TV.
CAPTION DISPLAY will not work when viewing a 480p, 720p, or 1080i input via the COMPONENT: Y-PBPR inputs.
When PIP Surf is on, Closed Caption will not work.
Digital Captions Font Style are sometimes different from the Font Style of Analog Captions.
Closed Caption and Digital Captions availability and content depends on the broadcaster. Closed Caption is
available when Closed Caption icon is displayed on screen.
6. Digital Captions will not be available (grayed out) when using analog channels.
75
ON-SCREEN DISPLAY
Caption Display
Off
On
Service:
[1 2 3 4 5 6]
Language: [Unknown
]
Font
: [Default 1 2 3 4 5 6 7 8]
Size
:
Standard
Small
Large
Style
:
Standard
High Visibility
SETUP
Set Monitor Out
This feature will select the source of the Monitor Output.
Setup
Setup
Menu Preference
Set Monitor Out
Video Out
Monitor
Screen Saver
Set The Inputs
TV Tuner Out
Set Black Side Panel
Set Closed Captions
Move
SEL
Return
Set Monitor Out
Move
Select
SEL
Monitor- Select Monitor to output the audio and video signals of the chosen input source (ANT A, ANT B, VID1-VID5) to a VCR or other
A/V device.
TV Tuner Out- Select TV Tuner Out to output the audio and video signals of the last watched Antenna Source (ANT A, ANT B).
Use CURSOR PAD G, H to highlight the function to change then press the SELECT button to select the function.
Press EXIT to quit menu or CURSOR PAD F to return to previous menu.
CableCARD Info
Select this feature to access your CableCARD ID and HOST ID. Please have this information ready when
you call your cable operator (see also page 13).
Setup
Setup
CableCARD Info.
CableCARD Info.
Set AV Control
Upgrades
Select the button below to access
Set Stand-By Mode
your CableCARD ID and Host ID.
Move
SEL
Select
CableCARD Info
Move
Set AV Control
SEL
Select
This feature will select the AV Control feature. Set this feature if you want to control some of the TV functions
from an external home control system.
Setup
Setup
Set AV Control
CableCARD Info.
Set AV Control
If you want to use the AV Control
Upgrades
function, please set the RS232C.
Set Stand-By Mode
ON-SCREEN DISPLAY
Move
SEL
Select
Connected RS232C
Move
SEL
Return
Use the CURSOR PADS and the SELECT button to check the Connected RS232C box.
NOTE:
For use with third party home Audio/Video control systems which are commercially available. Please see your dealer
regarding these “non Hitachi” home control systems.
76
SETUP
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be
upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will
notify and provide you with a flash card. In order to receive written notification and the flash card, please
complete and return the warranty card.
Setup
Setup
CableCARD Info.
Upgrades
Set AV Control
Software Version #: Main
1394
Upgrades
Set Stand-By Mode
Move
SEL
Select
VXXXX.XXXX
VXXXX.03
MMC Software Upgrade
Upgrade Now
Please insert MMC card
before upgrading.
Move
SEL
Return
Insert MMC card, then press the CURSOR PAD G, H to highlight “Upgrade Now”. Press the SELECT button to select and start
upgrading.
NOTE:
Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.
Set Stand-By Mode
This function sets the IEEE1394 in Stand-By Mode to ON or OFF. Certain digital devices have a power save
feature, in which the device automatically powers OFF when not in use (sleep mode). Only by setting the
IEEE1394 function in Stand-By mode to ON, will the TV be able to control a device that is in sleep mode.
Setup
Setup
CableCARD Info.
Set Stand-By Mode
Set AV Control
If you want to use the IEEE1394
Upgrades
function in the Stand-By, please
Set Stand-By Mode
Move
SEL
set the IEEE1394 Stand-By mode.
Select
IEEE1394 Stand-By
Move
NOTE:
SEL
Return
By turning ON the IEEE1394 function, your TV set will no longer be set for power saving Stand-By mode. The IEEE1394
Stand-By function must be set to OFF to return your TV set to the power saving Stand-By mode.
Power Swivel
This feature controls the motorized stand. It allows the customer to turn the LCD display left or right
using the remote control.
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Power Swivel
Move
SEL
Sel.
Power Swivel
Move
Unlocked
SEL
Set
Exit OSD menu system before controlling the motorized stand.
Use CURSOR PAD E to rotate the TV to the right.
Use CURSOR PAD F to rotate the TV to the left.
Release the CURSOR PAD to stop rotation.
NOTES:
1. The Power Swivel has a maximum turning radius of 30˚ (left and right).
2. Do not place any objects on the path of the monitor when using the power swivel feature.
3. Before using the power swivel feature, please make sure that the path of the monitor is clear of any fingers, hands
or any other body parts to avoid causing injury.
4. When the Picture-in-Picture (PIP) or Freeze mode is ON, the Power Swivel is disabled.
77
ON-SCREEN DISPLAY
Video
RGB ON SCREEN DISPLAY
USING THE RGB INPUT
IMPORTANT: TURN OFF THE AVC BOX, THE DISPLAY MONITOR AND THE EXTERNAL COMPONENT BEFORE
CONNECTING OR DISCONNECTING ANY CABLES.
1. AVC rear panel connection to an external component with an analog RGB output.
RGB ANALOG
OUTPUT
5
4
10
15
14
3
9
2
8
13
1
7
12
6
11
AUDIO OUT
SET-TOP-BOX
D-SUB 15 Pin
RGB Cable
(Optional)
Audio Cable
(Optional)
This LCD Television can automatically detect and display the signal format below.
1. RGB input signal.
This LCD Television can accept the following signal formats.
Recommended Signal List
Signal Mode
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Signal Name
VESA
VGA
VESA
1080i
720p
480p
Resolution
640 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1080
720
480
Vertical
Frequency (Hz)
Horizontal
Frequency (kHz)
70.09
59.94
72.81
75.00
56.25
60.32
72.19
75.00
60.00
70.07
75.03
60.02
75.03
59.94
59.94
59.94
31.47
31.47
37.86
37.50
35.16
37.88
48.08
46.88
48.36
56.48
60.02
63.98
79.98
33.72
44.96
31.47
NOTE: 1. Dots correspond to the true resolution in Real Mode of aspect ratio, when you select VGA 640 x 480 signal from the
table above. (One dot corresponds to one pixel).
2. Always reset AUTO ADJUST feature when setting new display setting or when changing to a new computer
(see page 85).
78
RGB ON SCREEN DISPLAY
2. The new setting (horizontal position, vertical position, clock, and phase) of the signal will be stored. The monitor can store up to 13
settings in addition to the 15 pre-set signal timing. Any additional new settings (more than 15) will over-write the first user’s setting,
second setting and so on.
No. Item
1
Video Control
2
3
4
5
6
7
8
AV Net
Audio Settings
Closed Caption
Clock
Monitor Out
Lock
Auto Link
Operation
Contrast and brightness work separately, however, other picture controls
are not available.
Available.
Not available.
Not available.
Clock indication is shown.
Both picture and audio are not available.
Not available.
Not Available.
79
USING THE RGB INPUT
3. Operation in RGB mode in relation to TV functions are shown below.
RGB ON SCREEN DISPLAY
USING THE RGB INPUT
4. Other signal formats may not be displayed correctly. Use AUTO ADJUST to automatically adjust the horizontal position, vertical
position, clock, and phase. We recommend you use a signal, which has more than 50% of amplitude of white area at each corner
of the picture, when performing Auto Adjustment. It may not work correctly with dark picture (see page 85).
5. Input signal level.
SYNC
TTL level H/V separate signal
RGB INPUT 0.7Vpp/1.0Vpp
NOTE:
Interlaced signal is not available.
6. RGB input signal will not appear at all when receiving a signal which is not supported by this product. If the setting is wrong, the
Display Monitor will display:
NO SYNC. SIGNAL
INVALID SCAN FREQ.
Without sync
Either horizontal or vertical
frequency is inappropriate
or out of range.
INVALID SCAN FREQ. will disappear
after 60 seconds.
POWER SAVING mode will come
on after 10 seconds.
NOTE: 1. If the Display Monitor cannot display a signal, please try AUTO ADJUST to display the signal. This is used to initialize
the MultiScan Converter.
2. Not all signals have AUTO ADJUST feature (see page 85).
3. Set-Top-Box and DVD player input signal does not have AUTO ADJUST feature.
80
RGB ON SCREEN DISPLAY
1. Press the INPUTS button, then use the CURSOR PAD and SELECT button on the
remote control to display the different features in RGB MODE.
USING THE RGB INPUT
2. Press EXIT on the remote control to quickly exit from a menu.
Video
Aspect
Setup
Power Swivel
Move
SEL
Sel
This part of the screen
shows which Remote
Control buttons to use.
81
RGB ON SCREEN DISPLAY
USING THE RGB INPUT
Contrast
Video
Aspect
Setup
Power
Swivel
Enhancer
Reset
Change the contrast between black and white levels in the
picture.
Adjust overall picture brightness.
Select between HIGH (9,300K), MEDIUM (7,500K),
STANDARD (6,500K), or Black/White (5,400K).
Enhance picture details (Off, Low, Medium or High).
Recall the factory preset data of the RGB Video Settings.
Real
Normal
Full
WXGA Mode
Aspect as it is presented in its true resolution.
Aspect in 4:3 standard.
Aspect in 16:9 standard.
Select WXGA Settings
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Automatically adjust the geometry to fit the screen.
Adjust horizontal position.
Adjust vertical position.
Adjusts the dot clock frequency to reduce the vertical stripe.
Adjusts the phase to correct blurred or unstable images.
Recall the factory preset data of the RGB setup settings.
Set the preferred input signal level.
Turns the gray side bars ON/OFF when watching Aspect in
Real and Normal signals in standard mode.
Unlock
Lock
Power Swivel enabled. Controls motorized stand.
Power Swivel disabled.
Brightness
Color Temperature
82
RGB ON SCREEN DISPLAY
This feature allows you to adjust the contrast in RGB mode.
CONTRAST
Video
Brightness
50%
Color Temperature
High
Reset
Reset
Enhancer
Move
Select
SEL
NOTES:
1.
2.
Off
Contrast can be set up to 110% if CURSOR PAD E is pressed and held for more than 3 seconds.
See TV contrast feature for additional information regarding contrast.
This feature allows you to adjust brightness in RGB Mode.
BRIGHTNESS
Video
100%
Contrast
Brightness
High
Reset
Reset
Enhancer
SEL
Select
COLOR
TEMPERATURE
Video
Off
Use the CURSOR PAD F or E to change the COLOR TEMPERATURE. Set to HIGH for a cooler
picture with more blue (1,200K), set to MEDIUM for more natural color (9,300K), or set to
STANDARD for accurate color (6,500K), or Black/White (5,400K).
100%
Contrast
Brightness
50%
Color Temperature
High
Reset
Reset
Enhancer
Move
SEL
Use CURSOR PAD F or E to adjust brightness.
Press MENU button to return to RGB MODE MENU and
EXIT to quit.
50%
Color Temperature
Move
Use CURSOR PAD F or E to adjust contrast.
Press MENU button to return to RGB MODE
MENU and EXIT to quit.
100%
Contrast
Select
Off
83
USING THE RGB INPUT
The following adjustments are independent of the TV mode:
•Press MENU in RGB mode for on screen display.
•Press CURSOR PAD G or H to highlight the item to be adjusted.
•Press SELECT to select the highlighted item.
VIDEO ADJUSTMENTS
RGB ON SCREEN DISPLAY
Enhances the picture detail.
USING THE RGB INPUT
ENHANCER
Video
Brightness
50%
Color Temperature
High
Reset
Reset
Enhancer
Move
SEL
Off
Select
Set CONTRAST, BRIGHTNESS, COLOR TEMPERATURE, and ENHANCER to factory
preset condition.
RESET
Video
Brightness
50%
Color Temperature
High
Reset
Reset
Enhancer
SEL
Use CURSOR PAD F or E to highlight Reset.
Press the SELECT button to RESET to factory
preset settings.
100%
Contrast
Move
Use CURSOR PAD F or E to set ENHANCER Off, Low,
Medium or High. Press SELECT button to ACCEPT and
EXIT to quit.
100%
Contrast
Off
Select
Use this function to select the picture format aspect ratio while using RGB input.
ASPECT
Use CURSOR PAD to highlight chosen selections. Press
SELECT button to set and EXIT button to quit.
Aspect
Mode
Real
WXGA Mode
Off
Move
SEL
Normal
Full
1280x768
1366x768
Return
RGB ASPECT DISPLAY MODE.
Recommendation
Input Signal
Mode
WXGA Mode
XGA
Normal
Off
WXGA (1280x768)
Full
1280x768
WXGA (1366x768)
Full
1366x768
RGB (Analog) INPUT SIGNAL
Others
X
ASPECT
NORMAL
MODE
AVAILABILITY FULL
SVGA/XGA
REAL
NORMAL
FULL
VGA
480p
REAL
REAL(1)
NORMAL NORMAL(1)
FULL
FULL(1)
720p
1080i
X
X
X
X
FULL(2,3) FULL(2,3)
For numbers in ( ), please see corresponding note below.
NOTES: 1. Lack of raster can be seen in RGB when a 480p signal is input.
2. AUTO ADJUST function (see page 85) is not available in 720p, 1080i, and 480p input signal.
3. FULL aspect mode, only 95% of information can be displayed (5% is treated as overscan).
84
RGB ON SCREEN DISPLAY
AUTO ADJUST
Auto Adjust
Horizontal Position
Adjust
0
Vertical Position
0
0
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move
Select
SEL
Use CURSOR PAD F, E cursors to highlight adjust.
Press SELECT to select AUTO ADJUST.
0
Reset
0.7V
Off
NOTES: •
•
•
•
•
Press SELECT to AUTO ADJUST the RGB mode.
The other functions do not operate while AUTO ADJUST is in progress.
Allow the LCD TV to warm up for 20 minutes before performing AUTO ADJUST.
Select a bright image for display while AUTO ADJUST takes place.
If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in
succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.
• Always reset AUTO ADJUST when setting new display setting or when changing to a new
external component.
H POSITION
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Black Side Panel
SEL
Adjust
0
0
0
0
Select
0.7V
Off
This feature allows you to adjust the vertical position in RGB mode.
V POSITION
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move
SEL
Use CURSOR PAD F, E to adjust the horizontal position.
Press the MENU button to return to previous menu item. Press
EXIT to quit.
Reset
Input Level
Move
This feature allows you to adjust the horizontal position of the display.
Select
Adjust
0
0
0
0
Use CURSOR PAD F, E to adjust the vertical
position.
Press MENU button to return to previous menu item.
Press EXIT to quit.
Reset
0.7V
Off
85
USING THE RGB INPUT
Setup
HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE
for current RGB format are adjusted automatically.
RGB ON SCREEN DISPLAY
USING THE RGB INPUT
HORIZONTAL CLOCK
Setup
Auto Adjust
Horizontal Position
Adjusts the pixel clock frequency to reduce the vertical stripe.
Adjust
0
Vertical Position
0
0
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move
NOTE:
Select
SEL
Use CURSOR PAD F, E to adjust the horizontal
clock. Press the MENU button to return to previous
menu. Press EXIT to quit.
0
Reset
0.7V
Off
Due to varying signal content, you may see vertical or horizontal lines bend occasionally in RGB mode. However, this
phenomenon is not a defect. It’s caused by a lack of picture content due to under-scanning in RGB mode.
CLOCK PHASE
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move
Select
SEL
RESET
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move
SEL
Select
Adjusts the phase to correct blurred or unstable images.
Adjust
0
0
Use CURSOR PAD F, E to adjust the clock phase.
Press the MENU button to return to previous menu item.
Press EXIT to quit.
0
0
Reset
0.7V
Off
Set HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK
PHASE to factory preset, for current RGB format.
Adjust
0
0
0
and CLOCK
Use CURSOR PAD F, E to highlight Reset.
Press the SELECT button to RESET to factory preset
settings.
0
Reset
0.7V
Off
86
RGB ON SCREEN DISPLAY
Select the Input Level voltage between 0.7V and 1.0V.
INPUT LEVEL
Adjust
Auto Adjust
Horizontal Position
0
Vertical Position
0
0
Horizontal Clock
Clock Phase
0
Reset
Reset
0.7V
Input Level
Off
Black Side Panel
Move
Select
SEL
BLACK SIDE
PANEL
The BLACK SIDE PANEL function turns the gray side bars ON/OFF when watching Aspect
in Real and Normal signals in Standard Mode.
Setup
Adjust
Auto Adjust
Horizontal Position
0
0
Horizontal Clock
Clock Phase
0
Reset
Reset
0.7V
Input Level
Off
Black Side Panel
SEL
Press the SELECT button to select BLACK SIDE PANEL
ON/OFF.
0
Vertical Position
Move
Use CURSOR PAD F, E to select between 0.7V and
1.0V depending on the amount of brightness in the
picture.
Select
POWER
SWIVEL
This feature controls the motorized stand. It allows the customer to turn the LCD display left or right
using the remote control.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Power Swivel
Move
SEL
Sel.
Power Swivel
Move
Unlocked
SEL
Set
Exit OSD menu system before controlling the motorized stand.
Use CURSOR PAD E to rotate the TV to the right.
Use CURSOR PAD F to rotate the TV to the left.
Release the CURSOR PAD to stop rotation.
NOTES:
1. The Power Swivel has a maximum turning radius of 30˚ (left and right).
2. Do not place any objects on the path of the monitor when using the power swivel feature.
3. Before using the power swivel feature, please make sure that the path of the monitor is clear of any fingers, hands
or any other body parts to avoid causing injury.
4. When the Picture-in-Picture (PIP) or Freeze mode is ON, the Power Swivel is disabled.
87
USING THE RGB INPUT
Setup
CARE OF YOUR HITACHI LCD DISPLAY
AND YOUR REMOTE CONTROL
DO
Dust the screen and frame with a cleaning cloth from the accessories pack.
Clean the screen and frame with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may
be used if the screen is extremely dirty.
Place your LCD Television away from extreme heat, humidity, and extremely dusty places.
Remove the plug (AVC Center/Display Monitor) from the wall outlet if your LCD Television will not be used for a
long period of time, for instance, when you go on vacation.
DO NOT
Do not clean your screen with strong cleaners, polishes or a chemically treated cloth.
Do not place rubber or vinyl products or cellophane tape on your LCD Television.
Avoid repeatedly touching the screen.
Do not subject the remote control to shocks such as dropping it on the floor, etc. This may cause physical damage
to the precision parts.
Avoid placing the remote control in a high humidity place or getting it wet. Do not leave it on or near a heater.
Excessive heat or moisture may cause the remote control unit to fail.
When the batteries run down, remote control operation will become erratic or become unresponsive. Replace the old
batteries with two new “AA” size batteries. Do not use an old battery with a new battery.
Exposing the screen to direct sunlight for a long period of time or heat may cause damage to the LCD screen.
88
RECEPTION PROBLEMS
• IGNITION NOISE:
Black spots or horizontal streaks may appear, picture may flutter or drift.
Usually caused by interference from automobile ignition systems, neon
lamps, electrical drills, and other electrical appliances.
• GHOSTS:
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected from tall buildings, hills or some other
objects. Changing the direction or position of the antenna may improve
reception. Ghosting may also be caused by defects in the antenna system
such as unshielded leads or connecting several sets to the same antenna
without using multiple antenna couplers.
• SNOW:
If your receiver is located in the fringe area of a television station where
the signal is weak, your picture may be marred by the appearance of small
dots. When the signal is extremely weak, it may be necessary to install a
special antenna to improve the picture.
• RADIO FREQUENCY INTERFERENCE:
The interference produces moving ripples or diagonal streaks, and in
some cases, causes loss of contrast in the picture.
NOTE:
The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment
from the TV set to a considerable distance.
89
TV
i
ure
Try
SYMPTOMS
ss
rd
cor
is p
rec
lug
t
ge
wit
d in
an
c
he
oth
d
''O
er
N"
cha
Ch
nn
eck
el (
an
sta
ten
t
ion
na
Ch
tr o
eck
con
ub
ne
an
le)
ctio
ten
ns
na
Ch
(ba
for
eck
ck
bro
ou
of T
ken
tsid
V)
Ch
lea
ea
eck
d-i
nte
n
nn
for
wir
a
loc
e
al i
Ad
nte
jus
tC
r fe
ren
on
t
r
ce
a
Ad
st c
jus
on
tB
tr o
rig
l
htn
Ad
ess
jus
con
tC
tr o
olo
l
rc
Ad
on
jus
tr o
tT
l
int
con
Ad
tr o
jus
l
tV
olu
me
con
tr o
l
CH
TR ECK
Y T TH
HE ES
Be
SE E I
sur
AD TEM
ee
xte
JU
Be
rna
ST S AN
sur
l co
ME D
ep
nn
ect
ow
NT
ion
er
Be
S
co
is
s
USEFUL INFO
U U U U U
U
Sound OK, picture poor U
U
U U
U
U
Picture OK, sound poor U
U
U U U
U
Picture blurred U
U
U U U
U
Lines or streaks in picture
U
U U U
U
Poor reception on some channels
U
U U U
U
Picture rolls vertically
U
No Picture, no sound U
U U
U
U
No color U
U
U U U
U
Poor color U
U
U U U
U
U
Dark Picture
U
U
U
HITACHI Liquid Crystal Display incorporates advanced power surge protection technology designed to protect against
component or circuit damage due to external or internal voltage power surges.
IF YOUR TELEVISION SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE:
1. Press the power switch (ON/OFF switch) once.
2. If there is still no power, wait 30 seconds and press the power switch again.
3. If there is still no power, unplug the power cord from the wall. Wait 30 seconds and plug the power cord back in.
Press the power switch again.
This protective technology should provide for years of lasting entertainment from your HITACHI Liquid Crystal Display.
90
PLUG and PLAY
This LCD Television complies with VESA DDC2B specifications, Plug & Play is
a system with computer, peripherals (including monitors) and operating
system. It works when the monitor is connected to a DDC ready computer that
is running an operating system software that is capable for the plug & play.
When a Plug and Play PC is powered on, it sends a command to the Monitor
requesting identification. The Monitor sends back a string of data including its
characteristics.
TRADEMARK ACKNOWLEDGMENT
DDCTM is a trademark of Video Electronics Standard Association.
IBM PC/AT and VGA are registered trademarks of International Business Machines Corporation of the U.S.A.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VESA is a trademark of a nonprofit organization, Video Electronics Standard Association.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Cable Compatible Television Apparatus- Tèlèvision câblocompatible, Canada.
Notes on Closed Caption:
This LCD Television receiver will display television closed captioning, (
15.119 of the FCC rules.
91
or
), in accordance with paragraph
USEFUL INFO
AGENCY REGULATORY
INFORMATION
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by Hitachi Home Electronics (America), Inc. may void the user’s warranty.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Any cables that are supplied with the system must be replaced with identical cables in order to assure compliance with
FCC rules. Order Hitachi spares as replacement cables.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
For questions regarding this declaration, contact:
Hitachi America, LTD.
Home Electronics Division
900 Hitachi Way
Chula Vista, CA 91914-3556
Tel. 1-800-448-2244 (1-800-HITACHI)
ATTN: CUSTOMER RELATIONS
92
USEFUL INFO
Features:
•
•
•
•
•
•
•
•
•
•
•
Audio:
New Easy-to-Use On-Screen Menu Control (3 Language)
New AV Network System Control
Control up to 4 components with one remote
2 IR Mouse cables included
Control Codes Stored in AV Control Center
Two Tuner Split Screen except RGB modes.
Illuminated and Preprogrammed Remote Control
Power Management: ON/OFF via signal detection
Menu Control Keys accessible from AV Control Center
Picture Enhancement
Input Signal Identification
CableCARD compatible - Contact your local cable operator
for more information
HDMI (High Deifinition Multimedia Interface)(High Bandwidth
Digital Content Protection V1.1 Compatible)
Photo Input (for your digital camera)
•
•
•
•
Supplied Accessories:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1366 x 768 Display Resolution (32”)
High-Contrast Pure-Color Glass Shield
Wide Viewing Angle: More than 170˚
4 Color Temperature Presets: Black/White-5400K, Standard6500K, Medium-9300K, High-1200K.
Multiple Screen Fill Modes (4:3 Standard/Expanded/Zoom1/
Zoom2/16:9 Standard/Zoom)1
4MB 10-bit 3D Y/C Comb Filter
Picture Modes (Day and Night)
Computer Display: VGA, (SVGA, XGA, SXGA-scaled) (32”)
Inputs:
• Power Input . . . . . . . . . . . . . .AC 120V, 60Hz
• Power Consumption
- Refer to rear panel at the back of the LCD
Monitor and AVC Center
• Antenna input impedance . . . . . . . . .75 Ohm
• Channel coverage . . . . . . . . . . . . . . . .191ch.
VHF-Band . . . . . . . . . . . . . . . . . . . . . .2 ~ 13
UHF-Band . . . . . . . . . . . . . . . . . . . . .14 ~ 69
CATV Mid Band . . . . . . . . . . . . . . .A-5 ~ A-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . .A-I
Super Band . . . . . . . . . . . . . . . . . . . . . .J-W
Hyper Band . . . . . . . . . . . . . . . .W+1 - W+28
Ultra Band . . . . . . . . . . . . . . . .W+29 - W+94
• Video . . . . . . . . . . . . . . . . .1.0Vp-p, 75 Ohm
•
S-Video
Luminance (Y) . . . . . . . . . .1.0Vp-p, 75 Ohm
Chrominance (C) . . . . . . .0.286Vp-p, 75 Ohm
•
Component Video
Luminance (Y) . . . . . . . . . . . . . . .1.0Vp-p, 75 Ohm
Chrominance (PB/PR) . . . . . . . . .0.7Vp-p, 75 Ohm
•
Audio input Impedance . . . . . . . . . .47k Ohm
Remote Control
Batteries
9’ Monitor Connection Cable
6’ AC Cable (2)
Subwoofer Cable
IR Mouse Cable (2)
INPUTS/OUTPUTS
Video:
•
•
•
•
MTS Stereo/SAP
Dynamic Bass and Matrix Surround
10W+10W
Soft Mute (50% and 100%)
Inputs: ............................................RGB, VIDEO 1-5
Wideband Component Y, Pb,Pr ............................................2
RGB: Analog Input ................................................................1
Composite Video...................................................................5
S-Video .................................................................................3
Antenna (RF) Inputs..............................................................2
Audio Output .........................................................................1
Monitor Output ......................................................................1
Headphone Output................................................................1
Subwoofer Output .................................................................1
HDMI .....................................................................................2
Photo Input............................................................................1
IEEE 1394.............................................................................2
SPECIFICATIONS
•
•
•
•
Multi-Scanning: ................24-109kHz (h), 50-85Hz (v)
Pixel Pitch .............0.51(horiz.) x 0.51(vert.) mm (32”)
FCC class: .................................B for Consumer Use
Power Requirements: ........................108-132V, 60Hz
DIMENSIONS
•
•
•
•
Width
Height
Depth
Weight
32”
30 3/4”
17 3/4”
2 1/16”
86 lbs.
Audio Video Control Center
•
•
•
•
Width .........................................................16 15/16”
Height ..............................................................3 3/8”
Depth...............................................................9 1/2”
Weight ...........................................................9.5 lbs.
1
Screen mode availability varies by input format
HDTV Monitors display HDTV when combined with an HDTV Tuner and Source.
All specifications, weights, and dimensions are subject to change without prior
notice. Please access www.hitachi.com/tv for detailed specifications and
dimensions for custom installations.
UltraVision Digital is a registered trademark of Hitachi Home Electronics (America),
Inc.
• Average input level . . . . . . . . . . . . . . . . .470mVrms
• RGB . . . . . . . . . . . . . . . . . . . . . . .0.7Vp-p, 75 Ohm
• HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(19 PIN)
Outputs:
• Video . . . . . . . . . . . . . . . . . . . . . . .1.0Vp-p. 75 Ohm
• Audio . . . . . . . . . . . . . . . . . . . .470mVrms, 1k Ohm
• Optical Out (Digital Audio) . . . .1 Optical Connector
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
93
USEFUL INFO
To locate an authorized
HITACHI service facility
in the continental U.S.A.
and Canada,
DIAL TOLL FREE
7 days a week, 24 hours a day
(1-800-448-2244)
Hitachi America, LTD.
Home Electronics Division
Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service,
a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide
you with convenient and expedient assistance. Our service hotline operator will direct you to the Hitachi Authorized Service
Facility nearest you. Just present proof of purchase and/or delivery receipts to the Hitachi Authorized Service Facility, and service
will be rendered in accordance with the terms of the limited warranty as stated on your warranty card or operating guide.
Should you have any questions regarding warranty, service, operation, or technical assistance, please
contact:
Hitachi America, LTD.
Home Electronics Division
900 Hitachi Way
Chula Vista, CA 91914-3556
94
USEFUL INFO
Hitachi Canada, LTD.
Digital Media Division
Should you have any questions regarding warranty, service, operation, or technical assistance, please
contact:
In Canada:
1-800-HITACHI
(1-800-448-2244)
Monday - Friday EST 9:00am - 7:00pm
Saturday EST 9:00am - 5:00pm
Look for your French Manual on the outside of the box.
If the manual is missing, call
for a copy.
1-800-HITACHI
(1-800-448-2244)
Pour de plus amples renseignements sur le service durant la période couverte par la garantie, sur le
fonctionnement ou pour de l’assistance technique communiquez avec:
Au Canada:
1-800-HITACHI
(1-800-448-2244)
Lundi - Vendredi L’EST 9:00am - 7:00pm
Samedi L’EST 9:00am - 5:00pm
La version française de votre manual se trouve á l’extérieur de la boîte.
Si le manuel est manquant, coposez le
pour obenir votre copie.
1-800-HITACHI
(1-800-448-2244)
HITACHI CANADA, LTD.
2495 Meadowpine Blvd.
Mississauga, ON L5N 6C3
95
INDEX
A
Accessories, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Antennas (Connecting), . . . . . . . . . . . . . . . . . . . . . . . .8
Antenna Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Aspect Ratio, . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 59
Audio (Sound Enhancement)
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Audio Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Auto Adjust (RGB Input) . . . . . . . . . . . . . . . . . . . . . . .85
Auto Noise Cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
A/V Network . . . . . . . . . . . . . . . . . . . . . . . .22-24, 31-32
B
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Black Enhancement . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Black Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
C
Caution and Safety Tips . . . . . . . . . . . . . . . . . . . . . . .2-3
Channel Manager . . . . . . . . . . . . . . . . . . . . . . . . . .60-61
Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . .60
Clock
Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Closed Captions
Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Color Management . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Color Decoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Color Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Contrast Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
E
Event Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
External Video Source . . . . . . . . . . . . . . . . . . . . . .14-22
F
Favorite Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
H
Locks
Change Access Code . . . . . . . . . . . . . . . . . . . . . . . . 62
Channel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Front Panel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Input Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Movie Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
TV Ratings (Canadian - English) . . . . . . . . . . . . . . . .65
TV Ratings (Canadian - French) . . . . . . . . . . . . . . . .66
M
Matrix Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Menu Preference
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Monitor Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
N
Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
P
Perfect Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Photo Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-35
Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Picture-in-Picture (PIP) . . . . . . . . . . . . . . . . . . . . . .39-41
Position (RGB Input)
Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
R
Remote Control
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-49
Programming Codes . . . . . . . . . . . . . . . . . . . . . .48-49
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
R/G/B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25, 78-87
S
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Connecting External Speakers . . . . . . . . . . . . . . . . .21
Internal Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Split Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
T
I
Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67-70
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Tint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Input Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-74
IEEE 1394 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20, 36
L
V
Language
Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Video Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-56
96
END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE
IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you and Hitachi America,
Ltd., Home Electronics Division ("HAL-HED"). By using this Hitachi digital television (the "DTV") and its software (the
"Software"), you agree to be bound by the terms of this License Agreement. IF YOU DO NOT AGREE TO BE BOUND
BY THIS LICENSE AGREEMENT, DO NOT USE THIS DTV AND ITS SOFTWARE.
The Software is protected by copyright laws and international copyright treaties, as well as other intellectual property
laws and treaties. The Software is licensed, not sold.
1. LICENSE GRANT. Subject to all of the terms, conditions and restrictions of this License Agreement, HAL-HED grants
to you a limited, revocable, non-exclusive right to use one copy of the Software only on one Hitachi labeled DTV owned
by you.
2. RIGHTS AND LIMITATIONS. Software Not for Resale. You may not resell or otherwise transfer for value the
Software, except that you may transfer the Software as part of a resale of the entire DTV product only.
Prohibition on Reverse Engineering, Decompilation, Disassembly and/or Modification. You may not reverse engineer,
decompile, disassemble or modify the Software.
Separation of Components. The Software is licensed as single product. Its component parts may not be separated for
use on more than one DTV.
No Transfers. You may not transfer, assign, rent, lease, lend or in any way sublicense the Software.
Trademarks. This License Agreement does not grant you any rights to any trademarks.
Third Party Software. You shall not use the Software in combination with any third party software.
3. VIOLATIONS; INDEMNITY. You understand that any use, copying or transfer of the Software, except as permitted
pursuant to this License Agreement, constitutes a violation of legal rights and may subject you to damages and an
award to HAL-HED of attorneys’ fees in connection with any violation of this License. You further understand that you
may be held legally responsible for any copyright infringement or other violation of intellectual property rights that is
caused or encouraged by your failure to abide by the terms of this License Agreement. You agree to defend, indemnify
and hold HAL-HED and its parent and affiliate companies harmless from and against any and all liability resulting from
any breach by you of this License Agreement and/or any use by you of the Software in combination with third party
software.
4. COPYRIGHT. All title and intellectual property rights in and to the Software (including but not limited to any images,
photographs, animation, video, audio, music, text, and "applets" incorporated into the Software), and any accompanying
printed materials are owned by HAL-HED. All title and intellectual property rights in and to the content which may be
accessed through use of the Software is the property of the respective content owner and may be protected by
applicable copyright or other intellectual property laws and treaties. This License Agreement grants you no rights to use
such content. All rights not expressly granted are reserved by HAL-HED. This provision applies to U.S. Government
end-users, who are granted only those rights expressly set forth herein.
5. EXPORT RESTRICTIONS. HAL-HED is licensing the Software for use within the United States only. You agree that
you will not export or re-export the Software. You specifically agree not to export or re-export the Software: (i) to any
country to which the U.S. has embargoed or restricted the export of goods or services, which currently include, but are
not necessarily limited to Cuba, Iran, Iraq, Libya, North Korea, Sudan, and Syria, or to any national of any such country,
wherever located, who intends to transmit or transport the Software back to such country; (ii) to any person or entity who
you know or have reason to know will utilize the Software in the design, development, or production of nuclear,
chemical, or biological wepons; or (iii) to any person or entity who has been prohibited from participating in U.S. export
transactions by any federal agency of the U.S. government. You warrant and represent that neither the Bureau of
Export Administration (BXA) nor any other U.S Federal Agency has suspended, revoked, or denied your export
privileges.
6. NO WARRANTIES. THE SOFTWARE IS PROVIDED "AS-IS, WHERE-IS." HAL-HED MAKES NO WARRANTIES
OF ANY KIND WHATSOEVER REGARDING THE SOFTWARE AND, TO THE MAXIMUM EXTENT PERMITTED BY
LAW, HEREBY EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED,
WITH RESPECT TO THE SOFTWARE. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED TO THE MAXIMUM EXTENT PERMITTED BY LAW.
97
END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE
7. LIMITATION OF LIABILITY. IN NO EVENT SHALL HAL-HED OR ANY OF ITS PARENT OR AFFILIATE
COMPANIES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; LOSS OF GOODWILL, EXPENDITURES
MADE OR COMMITTED FOR IN RELIANCE ON THE CONTINUATION OF THIS LICENSE AGREEMENT OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THE SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
8. NO FAILURE OF ESSENTIAL PURPOSE. YOU AGREE THAT NO FAILURE TO REPAIR A DEFECT, ERROR OR
BUG IN THE SOFTWARE SHALL CONSTITUTE A FAILURE OF THE ESSENTIAL PURPOSE OF THIS LICENSE
AGREEMENT.
9. CRYPTOGRAPHIC SOFTWARE. THIS PRODUCT CONTAINS SOFTWARE DEVELOPED BY THE OpenSSL
PROJECT INCLUDING CRYPTOGRAPHIC SOFTWARE WRITTEN BY ERIC YOUNG (THE "CRYPTOGRAPHIC
SOFTWARE"). THE CRYPTOGRAPHIC SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED TO
THE MAXIMUM EXTENT PERMITTED BY LAW. IN NO EVENT SHALL THE OpenSSL PROJECT, ITS
CONTRIBUTORS, HAL-HED OR ANY OF ITS PARENT OR AFFILIATE COMPANIES BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THE SOFTWARE OR THE CRYPTOGRAPHIC SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
10. TERMINATION. This License Agreement may be terminated at any time by HAL-HED effective immediately upon
notice to you.
11. GOVERNING LAW; SEVERABILITY. This Agreement shall be governed and construed in accordance with the laws
of the State of California, without regard to its conflict of laws rules, and any disputes hereunder shall be subject to the
exclusive jurisdiction and venue of the U.S. Federal Courts in the Southern District of California. If any part of this
License Agreement is unenforceable, the remainder shall be valid and binding to the maximum extent permitted by
applicable law.
98
NOTES
99
QR62241