Specifications | Akai ALED2405T Flat Panel Television User Manual

Contents
Features ............................................................... 45
Introduction ........................................................... 45
Preparation ........................................................... 45
Safety Precautions ............................................... 45
Power................................................................ 45
Information for users in the EU ............................. 46
Package Contents ................................................ 47
Environmental Information ................................... 48
Repair Information ............................................ 48
Remote Control Buttons ....................................... 49
TV and Operating Control Switch ......................... 50
Viewing the Connections - Back Connectors ....... 50
Viewing the Connections - Side Connectors ........ 51
Power Connection ................................................ 51
Using USB Media ................................................. 52
USB Memory Connection ................................. 52
Connecting the TV to a PC ................................... 52
Using Side AV Connectors ................................... 52
Connecting to a DVD Player via HDMI ................. 53
Connecting to a DVD Player................................. 53
Remote Control Handset ...................................... 53
Inserting Batteries ............................................. 53
Switching On/Off................................................... 54
To Switch the TV On ......................................... 54
To Switch the TV Off ......................................... 54
Input Selection ...................................................... 54
Basic Operations .................................................. 54
Viewing Electronic Programme Guide (EPG) ....... 55
First Time Installation............................................ 56
Installation ............................................................ 56
Auto Channel Scan (Retune) Menu Operation . 57
Manual Tuning ..................................................... 57
Digital Manual Search....................................... 57
Analogue Manual Search ................................. 57
Analogue Fine Tune.......................................... 57
Managing Stations: Channel List .......................... 57
Operating the Channel List ............................... 58
Moving a Channel ............................................. 58
Deleting a Channel ........................................... 58
Renaming a Channel ........................................ 58
Locking a Channel ............................................ 58
Managing Stations: Favourites ............................. 58
Button Functions ............................................... 58
Managing Stations: Sorting the Channel List ....... 59
On-Screen Information ......................................... 59
Media Playback Using Media Browser ................. 59
Viewing Photos via USB ................................... 60
Media Browser Settings .................................... 61
Changing Image Size: Picture Formats ................ 61
Cinema ............................................................. 62
Configuring Picture Settings ................................. 62
Operating Picture Settings Menu Items ............ 62
Picture Settings Menu Items ............................. 62
PC Picture Settings........................................... 63
Configuring Sound Settings .................................. 63
Operating Sound Settings Menu Items ............. 63
Sound Settings Menu Items.............................. 63
Configuring Your TV’s Settings ............................. 64
Operating Settings Menu Items ........................ 64
Settings Menu Items ......................................... 64
Using a Conditional Access Module
(not included) ........................................................ 64
Viewing Conditional Access Menu (*) ............... 64
Configuring Language Preferences ...................... 65
Language Settings ............................................ 65
Parental Control.................................................... 65
Parental Settings Menu Operation ................... 66
Timers ................................................................... 66
Configuring Date/Time Settings ............................ 67
Configuring Source Settings ................................. 67
Configuring Other Settings ................................... 68
Operation .......................................................... 68
Other Features ..................................................... 68
Teletext ................................................................. 69
Tips ....................................................................... 69
Appendix A: PC Input Typical Display Modes....... 70
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types) ........................ 70
Appendix C: Supported DVI Resolutions.............. 71
Appendix D: Software Upgrade ............................ 71
Appendix E : Supported File Formats
for USB Mode ....................................................... 72
Specifications ....................................................... 73
MOBIL TV INSTRUCTION MANUAL ................... 74
English - 44 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 44
22.08.2011 15:50:27
Features
Introduction
• Remote controlled colour LED TV.
• Fully integrated Terrestrial digital-cable TV (DVB-T
MPEG2)
• HDMI connectors for digital video and audio.
• USB input.
Thank you for choosing this product. This manual
will guide you through the proper operation of your
TV. Before operating the TV, please read this manual
thoroughly. Please keep this manual in a safe place
for future reference.
This device is intended to receive and display TV
programmes. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD recorder,
VCR, PC etc.).
• 1000 programmes (analogue+digital).
• On Screen Display (OSD) menu system.
• Integrated tuner DVB-T, MPEG2 compatible.
• Scart socket for external devices.
This device is only suitable for dry indoor use. This
appliance is intended solely for private domestic use
and may not be used for industrial and commercial
purposes. We exclude liability in principle, if the device
is not used as intended, or unauthorized modifications
have been made. To operate your LED TV in extreme
ambient conditions may cause the damage of the
device.
• Stereo sound system. (German+Nicam)
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer / Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.
• AVL (Automatic Volume Limiting).
• Auto power down.
• PLL (Frequency Search).
• PC input.
10 cm
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7.
10 cm
10 cm
• Game Mode.
Safety Precautions
Read the following recommended safety
precautions carefully.
Power
• Always use the provided AC adaptor.
• Operate only from the power source specified on
the AC adaptor.
• The power adaptor may become hot during normal
operation. This is not a malfunction.
• Please make sure that the adaptor is not covered
while in operation. Leave a space of 15 cm
(minimum) around the AC adaptor.
• The rating information and safety caution of the AC
adaptor are provided on the adaptor.
English - 45 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 45
22.08.2011 15:50:28
WARNING: When the set is not in use for a long time,
disconnect from the power.
substitutions may result in fire, electrical shock or
other hazards.
Power Cord
Servicing
Do not place the set, a piece of furniture, etc. on the
power cord or pinch the cord. Handle the power cord
by the plug. Do not unplug the appliance by pulling from
the power cord and never touch the power cord with wet
hands as this could cause a short circuit or electric shock.
Never make a knot in the cord or tie it with other cords.
The power cord should be placed in such a way that they
are not likely to be stepped on. A damaged power cord
can cause fire or give you an electric shock. When it is
damaged and needs to be replaced, it should be done
by qualified personnel.
Please refer all servicing to qualified personnel.
Do not remove the cover yourself as this may
result in an electric shock.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen etc). Do not expose
this device to rain or water, as this may
be dangerous and do not place objects
filled with liquids, such as flower vases,
on top.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable
and should principally be recycled. Packaging
materials, such as a foil bag, must be kept away
from children.
• Batteries, including those which are heavy metalfree, should not be disposed of with household
waste. Please dispose of used batteries in an
environmentally friendly manner. Find out about the
legal regulations which apply in your area.
• Do not try to recharge batteries, there is a danger
of explosion. Replace batteries only with the same
or equivalent type.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use a soft, dry cloth.
Ventilation
The slots and openings on the TV set
are intended for ventilation and to ensure reliable
operation. To prevent overheating, these openings
must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to
open flames or sources of intense heat
such as an electric heater. Ensure that
no open flame sources, such as candles,
are placed on top of the TV. Batteries should not be
exposed to excessive heat such as sunshine, fire or
the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Information for users in the EU
This symbol on the product or on its packaging means
that your electrical device should be
disposed at the end of its service life
separately from your household wastes.
There are separate collection systems for
recycling in the EU. For more information,
please contact the local authority or the
dealer where you purchased the
product.
Disconnecting the Device
The mains plug is used to disconnect the TV set
from the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorized
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning! Do not leave your TV in standby or operating
mode when you leave your house.
English - 46 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 46
22.08.2011 15:50:28
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Package Contents
Devices connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
a coaxial cable, may in some circumstances create
a fire hazard.
INFO
SLEEP
SCREEN
SOURCE
PRESETS
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
LED TV
MENU
RETURN
Instruction Book
FAV
Electrical devices not in the hands of children
Never let children use electrical devices unsupervised.
Children cannot always recognize properly any
possible danger. Batteries / accumulators can be life
threatening when swallowed. Store batteries out of
the reach of small children. In case of swallowing a
battery, medical aid has to be sought immediately.
Also keep the packaging away from children as there
is danger of suffocation.
The Standby button does not fully switch off this
product. Moreover, the device continues to consume
power in standby mode. In order to separate the
device completely from mains, the mains plug has to
be pulled from the mains socket. Because of that the
device should be set up in a way, that an unobstructed
access to the mains socket is guaranteed, so that
in case of emergency the mains plug can be pulled
immediately. During periods of prolonged non-use,
the TV should be disconnected from the mains power
supply.
LANG.
SUBTITLE
EPG
/
Batteries: 2 X AAA
Remote Control
12V CAR ADAPTOR
1 X Video & Audio
Connection Cable
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Licence Notification (Optional)
Manufactured under license from Dolby
Laboratories.
Note: You should check the contents after opening
your purchase and make sure that every item is
included.
Note: The HDMI connection between PC and TV
may cause radio interference in which case it is
recommended to use VGA(DSUB-15) connection.
English - 47 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 47
22.08.2011 15:50:29
Environmental Information
• This television is designed to consume less energy to save the environment.
You not only help to save the environment but you can also save money by reducing electricity bills thanks to the
energy efficiency features of this TV. To reduce energy consumption, you should take the following steps:
• You can use the Power Save Mode setting, located in the Other settings menu. If you set the Power Save
Mode as On, the TV will switch to energy-saving mode and the luminance level of the TV set will be decreased
to optimum level. Note that some picture settings will be unavailable when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
energy consumption.
• Note that annually, using the TV set in Power Save Mode has more power efficiency than disconnecting
the TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to
activate Power Save Mode setting to reduce your annual power consumption. And also it is recommended
to disconnect the TV from the mains plug to save energy more when you do not use.
• Please helps us to save environment by following these steps.
Repair Information
Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact
your local dealer, where you purchased this TV for further information.
Be sure to ground the connection properly.
Connect the ground terminal of the AC adaptor with the ground
terminal provided at the power outlet using the enclosed power cord.
If the provided plug does not fit your outlet, consult an electrician for
replacement of the obsolete outlet.
English - 48 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 48
22.08.2011 15:50:30
Remote Control Buttons
1. Standby
2. Image size
INFO
3. Sleep timer
4. Numeric buttons
SLEEP
SCREEN
SOURCE
PRESETS
5. Return / Exit / Index page (in TXT mode)
6. Cursor up
7. Cursor left
8. Programme up /Page down
9.
Programme down /Page up
10. Mono-Stereo / Dual I-II / Current language (*)
(in DVB channels)
RETURN
11. Previous Programme
MENU
12. Electronic programme guide
13. Info / Reveal (in TXT mode)
14. Picture mode selection
15. Source selection
16. Red button
17. Green button
18. Yellow button
19. Menu on-off
20. Blue button
21. OK / Edit Channel list / Hold (in TXT mode)
29
FAV
LANG.
SUBTITLE
EPG
/
22. Cursor right / Subpage (in TXT mode)
23. Cursor down
28
30
24. Volume up
25. Volume down
26. Mute
31
27. Teletext / Mix
28. Subtitle on-off (in DVB channels)
29. Favourite channels
30. No Function
31. Media Browser playback buttons
Note: Buttons that are not indicated with a
number on the remote control illustration are
not functional in TV mode.
English - 49 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 49
22.08.2011 15:50:31
TV and Operating Control Switch
FRONT and REAR VIEW
Control switch VIEW
Control Switch
1. Up direction
2. Down direction
3. Programme/Volume / AV /
Standby-On selection switch
Note: You can move the switch,
upward or downward to change
the volume. If you want to change
channels, press the middle of the
switch once (Position 3) and then
move upward or downward. If you
press the middle of the switch once
more, source OSD will be displayed.
If you press the middle of the switch
and hold about a few seconds, the
TV will switch to standby mode. Main
menu OSD cannot be displayed via
control buttons.
Viewing the Connections - Back Connectors
HDMI 1
12V
DC IN
SPDIF
Coax.OUT
1. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has a HDMI socket. Your TV is capable of displaying
High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These
devices must be connected via the HDMI sockets or Component Socket. These sockets can accept
either 720p or 1080i signals. No sound connection is needed for a HDMI to HDMI connection.
2. RF Input connects to an aerial antenna system.
Note: If you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
3. SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and
SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note: S-VHS signal is supported via the scart socket (optional).
4. VGA Input is for connecting a personal computer to the TV set.
English - 50 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 50
22.08.2011 15:50:32
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input.
WARNING: You cannot use VGA and YPbPr at the same time.
5. SPDIF Out outputs audio signals of the currently watched source.
Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input.
V+
V+
6. DC 12 V Input is used for connecting the supplied power adaptor. V-
V-
.
Viewing the Connections - Side Connectors
1. The CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see “Conditional Access”
section.
2. Side USB input.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device’s audio cable’s connectors into
the RED and WHITE jack of the supplied side AV connection cable. Colours of the
connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or
COMPONENT VIDEO input.
MODE
o
3. Side audio-video connection input is used for connecting video and audio signals
of external devices. To make a video connection, you must use the supplied AV
connection cable for enabling connection. First, plug singular jack of the cable to the
TV’s Side AV socket. Afterwards, insert your video cable’s (not supplied) connector
into the YELLOW input (located on the plural side) of the supplied AV connection
cable. Colours of the connected jacks should match.
4. The headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones.
5. Volume/ Programme/ Source and Standby-On switch
Power Connection
IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives
12 V voltage. Connect this adaptor to a system that supplies 110-240V AC,50/60Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
12V
HDMI 1
To POWER
INPUT DC 12 V
terminal
DC IN
SPDIF
Coax.OUT
AC adapter
English - 51 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 51
22.08.2011 15:50:35
Using USB Media
Connecting the TV to a PC
• You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, MP3 and video files stored on a
USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You should back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that the manufacturer
will not be responsible for any file damage or data
loss.
For displaying your computer’s screen image on your
TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use a 15-pin D-sub display cable
to connect a PC to the TV. When the connection is
made, switch to PC source. See the Input selection
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix.
PC VGA Cable
(Not supplied)
• Do not pull out USB module while playing a file.
SIDE VIEW
PC Input
(back)
Or
Side Audio/Video
Connection Cable
(Supplied)
SIDE AV
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Do not
repeatedly quickly plug and unplug the drive. This
may cause physical damage to the USB player and
especially the USB device itself.
PC Audio Cable
(Not supplied)
Side AV Input
USB MEMORY
Note: If you connect a PC to the TV using HDMI
connection, radio interference may occur. Therefore
this type of connection is not recommended. You
should use VGA connection instead.
USB
Using Side AV Connectors
5Vdc
Max:500mA
USB Memory Connection
IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB devices to the USB input of the TV. You can
connect a USB device to your TV by using the USB
input of the TV.
Note: It is possible certain types of hard disk drives
are not supported.
You can connect a range of optional equipment to your
LED TV using side connectors of the TV.
• For connecting a camcorder or camera , you should
use SIDE AV socket (side). To do this, you must use
the supplied video/audio connection cable. First,
plug single jack of the cable to the TV’s AV IN socket
(side). Afterwards, insert your camera cable’s (not
supplied) connectors into the plural part of the video/
audio connection cable. Colours of the connected
jacks should match. See illustration below.
• Afterwards, you should switch to Side AV source. See
the section Input selection in the following sections
for more information.
AV Cable
(not supplied)
SIDE AV
Side AV Connection
Cable (supplied)
Headphone
Camera
• To listen the TV sound from headphones, you
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
English - 52 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 52
22.08.2011 15:50:36
• When the connection is made, switch to YPbPr source.
See, Input selection section.
Connecting to a DVD Player
via HDMI
• You may also connect through the SCART input.
Please refer to your DVD player’s instruction book
for additional information. Power off both the TV and
the device before making any connections.
H D MI 1
12V
DC IN
Note: Not all cables shown in the illustration are
supplied.
SPDIF
Coax.OUT
• If your DVD player has an HDMI socket, you can
connect via HDMI for better video and audio quality.
H D MI 1
12V
HDMI Cable
(not supplied)
DC IN
SPDIF
Coax.OUT
Scart Cable
(not supplied)
External device
• When you connect to DVD player as illustrated above,
switch to the connected HDMI source. See, Input
Selection section for more information on changing
sources.
Connecting to a DVD Player
• Some DVD players are connected through
COMPONENT SOCKETS (YPbPr). YPbPr can be
used only when you connect a device that has a
YPbPr output through the PC input with YPbPr to
PC cable (YPbPr cable is not supplied).
• When the connection is made, switch to YPbPr
source. See, “Input selection” section.
• To enable audio connection, use the VGA/
Component Audio cable. First, plug single jack
of the cable to the TV. Afterwards, insert your DVD
player’s audio cable’s connectors into the plural part
of the VGA/Component audio connection cable
(see illustration below). Colours of the connected
jacks should match ( RED & WHITE).
External device
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
Remote Control Handset
Inserting Batteries
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
Audio Connection
Side AV
To RED & WHITE inputs
Side AV Input
Side AV
Connection cable
(supplied)
Audio Cable
(Not supplied)
DVD Player
Video Connection
YPbPr to PC
Scart socket cable (optional)
DVD Player
HDMI
inputs
Note: Remove the batteries from the remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
English - 53 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 53
22.08.2011 15:50:37
Switching On/Off
Input Selection
To Switch the TV On
• Connect the power cord to the 110-240V AC, 50/60
Hz.
• Press STANDBY touch button. Then the standby
LED lights up.
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.
• To switch on the TV from standby mode either:
• Press the “ ” button, P+ or P- or a numeric button
on the remote control.
• Press the control switch right side of the TV. The TV
will then switch on.
(optional)
Note: If you switch on your TV via P+ or P- buttons on
the remote control or on the TV set, the programme
that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Press the “ ” button on the remote control or hold
the control switch on the Tv until shut down , so the
TV will switch to standby mode.
• To power down the TV completely, unplug the power
cord from the mains socket.
Note: YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
Note: When the TV is switched to standby mode, the
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
You can operate your TV using both the remote
control and onset buttons.
Digital Teletext
Operation with the Buttons on the TV
• Press the “
Volume Setting
” button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on the digital teletext
screen.
” button is pressed, the TV returns to
• When the “
television broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
Basic Operations
• You can move the control switch upward or
downward for changing the volume. To increase
volume, please move the switch upward. Move the
switch downward to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection
• First press the control switch once to change
channel. You can move the switch upward to select
the next programme or move it downward to select
the previous programme.
Viewing Main Menu
• Menu screen cannot be displayed by using the
control switch.
AV Mode
• Press the control switch consecutively until the
source OSD is displayed on the screen.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
English - 54 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 54
22.08.2011 15:50:38
Volume Setting
• Press “V+” button to increase the volume. Press “V-”
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “ P-” button to select the previous
programme.
• Press “P+” button to select the next programme.
Programme Selection (Direct Access)
• Press the numeric buttons on the remote control to
select programmes between 0 and 9. The TV will
switch to the selected programme.
Viewing Electronic Programme
Guide (EPG)
Red button (Prev Time Slice): Displays the
programmes of previous time slice.
Green button (Next Time Slice): Displays the
programmes of the next time slice.
Yellow button (Prev Day): Displays the programmes
of previous day.
You can view the electronic programme guide (EPG)
to see information about available programmes.To
view the EPG menu please press EPG button on the
remote control.
Blue button (Next day): Displays the programmes
of the next day.
• Press “ ”/“
channels.
OK (Options): Displays programme options including
“Select Channel” option.
”
buttons to navigate through
• Press “ ”/“ ” buttons to navigate through the
programme list.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
Text button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
• Please note that event information is updated
automatically. If there is no event information data
available for channels, the EPG will be displayed
with blanks.
Red button (Prev Day): Displays the programmes
of previous day..
OK (Options): Displays programme options including
“Select Channel” option.
INFO (Event Details): Displays the programmes in
detail.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views filtering options.
Green button: Programme schedule will be listed
INFO (Details): Displays the programmes in detail.
Yellow button: Display EPG data in accordane with
timeline schedule
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
Blue button (Filter): Views filtering options.
OK (Options): Displays programme options including
“Select Channel” option.
Text (Search): Displays “Guide Search” menu.
SUBTTL: Press SUBTITLE button to view Select
Genre menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
English - 55 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 55
22.08.2011 15:50:38
be searched and results matching your criteria will
be listed.
(Now) : Shows the current programme.
First Time Installation
IMPORTANT: Ensure that the aerial is connected
and a Common Interface module is not inserted
before switching on the TV for the first time
installation.
• When the TV is operated for the first time, the
installation wizard will guide you through the
process. First, the language selection screen will
be displayed:
To select the “Yes” or “No” option, highlight the item by
using “ ” or “ ” buttons and press OK button.
Afterwards the following OSD will be displayed on
the screen and the TV will search for both digital and
analogue TV broadcasts.
Note: You can press “MENU” button to cancel.
• Use “ ” or “ ” buttons to select your language
and press OK button to set the selected language
and continue.
• After selecting the language, “Welcome!” screen will
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN, please select
“Yes” and than press “OK”.
• Press OK button to quit channel list and watch TV.
• By pressing “ ” or “ ” button, select the country
you want to set and press “ ” button to highlight
Teletext Language option. Use “ ” or “ ” button
to select desired Teletext Language.
• Press “ ” button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You should set the Scan Encrypted as Yes if you
want to scan coded stations.Afterwards select the
desired Teletext Language.
Installation
Press “MENU” button on the remote control and
select Installation by using “ ” or “ ” button. Press
OK button and the following menu screen will be
displayed.
• Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
English - 56 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 56
22.08.2011 15:50:39
Select Automatic Channel Scan (Retune) by using “
”/“ ” button and press OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select options by using “ ”/“ ” and OK buttons.
Analogue Manual Search
Auto Channel Scan (Retune) Menu
Operation
Analogue: Searches and stores analogue stations.
Digital & Analogue: Searches and stores both
analogue and aerial DVB stations.
• Whenever you select an automatic search type and
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“ ” or “ ” and
OK button.
• After the auto channel scan type is set and selected
and confirmed, the installation process will start and
the progress bar will move along. Press “MENU”
button to cancel process. Located channels are not
stored if the process is cancelled.
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation
menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.
• Select the desired Search Type using “ ” or
“ ” button. Manual search options will change
accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press “MENU” button to cancel.
Digital Manual Search
After selecting search type as analogue, you can use
“ ”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
• Select Analogue Fine Tune from the Installation
menu by using “ ” or “ ” and OK buttons. The
analogue fine tune screen will be displayed. The
Analogue Fine Tune feature will not be available if
there are no analogue channels, digital channels
and external sources stored.
• Press OK button to proceed. Use “ ” or “ ” button
to set Fine Tune. When finished, press OK button
again.
Managing Stations: Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
• Press “MENU” button to view main menu. Select
the Channel List item by using “ ” or “ ” button.
Press OK to view menu contents.
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.
Select Edit Channel List to manage all stored
channels. Use “ ” or “ ” and OK buttons to select
Edit Channel List.
English - 57 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 57
22.08.2011 15:50:40
Operating the Channel List
Locking a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
• Select the channel that you want to lock and select
Lock option. Press OK button to continue.
• You will be asked to enter parental control PIN.
Default PIN is set as 0000. Enter the PIN number.
• Press “ ” or “ ” button to select the channel that
will be processed. Press “ ” or “ ” button to select
a function on Channel List menu.
• Use P+ or P- buttons to move page up or down.
• Press BLUE button to view filtering options.
• Press “MENU” button to exit.
• Press OK button when the desired channel is
highlighted to lock/unlock the channel. The Lock
symbol will be displayed next to the selected
channel.
Managing Stations: Favourites
Moving a Channel
• First select the desired channel. Select Move option
in the channel list and press the OK button.
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen
will be displayed. Select Yes if you want to move the
channel and press OK.
• Press the OK button to process. Selected channel
is now moved.
You can create a list of favourite programmes.
• Press “MENU” button to view the main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
• Select Favourites to manage favourite list. Use “
”/“ ” and OK buttons to select Favourites.
• You can set various channels as favourites so that
only the favourite channels are navigated.
Deleting a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
• Select the channel that you want to delete and select
Delete option. Press the OK button to continue.
• A warning screen will appear. Select YES to
delete, select No to cancel. Press the OK button
to continue.
Renaming a Channel
• Select the channel that you want to rename and
select Edit Name option. Press OK button to
continue.
• Pressing “ ” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
• Select a channel by using “ ” or “ ” button. Press
OK button to add selected channel to favourites list.
Press OK button again to remove.
Button Functions
• OK: Add/remove a station.
• YELLOW: Tag/untag a channel.
• GREEN: Tag/untag all channels.
• BLUE: Displays filtering options.
• When finished, press the OK button to save. Press
“MENU” to cancel.
English - 58 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 58
22.08.2011 15:50:41
Managing Stations: Sorting the
Channel List
Media Playback Using Media
Browser
You can select broadcasts to be listed in the channel
list. To display specific types of broadcast, you should
use the Active channel list setting.
If the USB stick is not recognized after power off/on or
First Time Installation, unplug the USB device, turn the
TV off and on again and re-insert the USB device.
Select Active channel list from the Channel list
menu by using “ ” or “ ” button. Press OK button
to continue.
To display the Media Browser window, press either
“MENU” button on the remote control and then select
Media Browser by pressing “ ” or “ ” button. Press
OK button to continue. Media Browser menu options
will be displayed.
Also, when you plug USB devices, media browser
screen will be displayed automatically:
You can select a broadcast type option from the list
by using “ ” /“ ” and OK buttons.
On-Screen Information
You can press “INFO” button to display on-screen
information. Details of the station and current
programme will be displayed on the information
banner.
You can play music, picture and video files from the
connected USB memory stick. Use “ ” or “ ” button
to select Videos, Photos, Music or Settings.
Viewing Videos via USB
The information banner gives information on the
channel selected and the programmes on it. The name
of the channel is displayed, along with its channel
list number.
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are
not available, then the information banner will be
displayed with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed
on the screen.
When you select Videos from the main options,
available video files will be filtered and listed on this
screen. You can use “ ” or “ ” button to select a video
file and press OK button to play a video. If you select
a subtitle file and press OK button, you can select or
deselect that subtitle file. The following menu will be
displayed while playing a video file:
Jump (Numeric buttons): The TV will jump to the
file starting with the letter you input via the numeric
buttons on your remote control.
Play This (OK button): Plays the selected file.
Play ( button): Plays all media files starting with
the selected one.
Lang (Play Preview): Displays selected file in a small
preview screen.
RED button: Sorts files by date.
English - 59 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 59
22.08.2011 15:50:42
YELLOW button: Toggles viewing style.
Pause (
BLUE button: Changes filter options.
Continue (
Play (
button): Starts the video playback.
Loop/Shuffle (GREEN button): Press once to disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
Stop (
button): Stops the video playback.
Pause (
button): Goes backward.
Forward (
button): Goes forward.
button) : Continues the slideshow.
Previous/Next (Left/Right buttons): Jumps to
previous or next file on slideshow.
button): Pause the video playback.
Rewind (
button) : Pauses the slideshow.
Rotate (Up/Down buttons): Rotates the image using
up/down buttons.
Subtitle/Audio (LANG. button): Sets subtitle/Audio.
RETURN (Exit): Back to file list.
Yellow: Opens subtitle time correction menu.
INFO: Displays help screen.
Viewing Music via USB
When you select Music from the main options,
available audio files will be filtered and listed on this
screen.
Press RETURN button to switch back to previous
menu.
Viewing Photos via USB
When you select Photos from the main options,
available image files will be filtered and listed on this
screen.
Play ( button) : Plays all media files starting with
the selected one.
Stop (
Pause (
button) : Stops playback.
button) : Pauses the selected playback.
RED: Sorts files by Title,Artist or Album.
Jump (Numeric buttons):Jump to selected file using
the numeric buttons.
OK: Views the selected picture in full screen.
Slideshow (
all images.
button): Starts the slideshow using
GREEN button: Views images in thumbnails.
RED button: Sorts files by date.
YELLOW button: Toggles viewing style.
Loop/Shuffle (GREEN button): Press once to disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
0..9 (Numeric buttons): Jumps to the selected file.
Play This (OK button) : Plays the selected file.
Previous/Next (Left/Right buttons) : Jumps to
previous or next file to play.
YELLOW: Toggles viewing style.
BLUE: Changes media type.
BLUE button: Changes media type.
Slideshow Options
English - 60 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 60
22.08.2011 15:50:43
Media Browser Settings
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
Subtitle
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
You can set your Media Browser preferences by
using the Settings dialog. Press “ ” or “ ” button to
highlight an item and use “ ” or “ ” button to set.
View Style: Sets default browsing mode.
Note: You can shift to screen up or down by pressing
“ ” / “ ” buttons while picture zoom is selected as
panaromic, 14:9 Zoom, Cinema or Subtitle.
Slide Show Interval: Sets slide show interval time.
14:9
Show Subtitle: Sets subtitle enabling preference.
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
Subtitle Language: Sets supported subtitle
language.
Subtitle Position: Sets subtitle position as up or
down.
Subtitle Font Size: Sets subtitle font size (max.
54pt).
Changing Image Size: Picture
Formats
14:9 Zoom
• You can change the aspect ratio (image size) of
the TV for viewing the picture in different zoom
modes.
• Press the “SCREEN” button repeatedly to change
the image size. Available zoom modes are listed
below.
Auto
This option zooms to the 14:9 picture.
When AUTO is selected, the aspect ratio of the screen
is adjusted by the information provided by the selected
source(if available)
4:3
Use to view a normal picture (4:3 aspect ratio) as this
is its original size.
Note: Auto mode only will be available in HDMI, YPbPr
and DTV sources.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
Panoramic
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
English - 61 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 61
22.08.2011 15:50:43
Sharpness: Sets the sharpness value for the objects
displayed on the screen.
Colour: Sets the colour value, adjusting the colors.
Power Save Mode: Use “ ” or “ ” button to select
Power Save Mode.
The top and bottom of the picture are slightly cut off.
Cinema
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
Press “ ” or “ ” button to set Power Save Mode as
On or Off.
See the section, “Environmental Information” in
this manual for further information on Power Save
Mode.
Note : The backlight function will be inactive if Power
Save Mode is set to on.
Backlight (optional): This setting controls the
backlight level and it can be set to Auto, Maximum,
Minimum, Medium and Eco Mode.
Note: Backlight can not be activate in VGA or Media
Browser mode or while picture mode is set as
Game.
Configuring Picture Settings
You can use different picture settings in detail.
Press “MENU” button and select the Picture icon
by using “ ” or “ ” button. Press OK button to view
Picture Settings menu.
Noise Reduction: If the broadcast signal is weak and
the picture is noisy, use Noise Reduction setting to
reduce the noise amount. Noise Reduction can be set
to one of these options: Low, Medium, High or Off.
Advanced Settings
• Colour Temp: Sets the desired colour tone.
Setting Cool option gives white colours a slight blue
stress.
For normal colours, select Normal option.
Setting Warm option gives white colours a slight red
stress.
• Picture Zoom:Sets the picture size to Auto,16:9,
Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or
Cinema.
• HDMI True Black (optional): While watching from
HDMI source, this feature will be visible in the Picture
Settings menu. You can use this feature to enhance
blackness in the picture. You can set this feature as
“On” for activating HDMI True Black mode.
Operating Picture Settings Menu Items
• Press “ ” or “ ” button to highlight a menu item.
• Use “ ” or “ ” button to set an item.
• Press “MENU” button to exit.
Picture Settings Menu Items
Mode: For your viewing requirements, you can set
various screen modes. The Picture mode can be set
to one of these options: Cinema,Game,Dynamic
and Natural.
Contrast: Sets the lightness and darkness values
of the screen.
• Film Mode (optional): Films are recorded at a
different number of frames per second to normal
television programmes.Press “ ” or “ ” buttons to
select Film mode. Press “ ” or “ ” buttons to set
this feature Auto or Off. Turn this feature to Auto
when you are watching films to see the fast motion
scenes clearly.
• Colour Shift: Adjust the desired colour tone.
Reset: Resets the picture settings to factory default
settings.
While in VGA (PC) mode, some items in Picture menu
will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.
Brightness: Sets the brightness value for the
screen.
English - 62 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 62
22.08.2011 15:50:44
PC Picture Settings
For adjusting PC picture items, do the following:
Press “ ” or “ ” button to select Picture icon. Picture
menu appears on the screen.
Contrast, Brightness, Colour, Colour Temp and
Picture Zoom settings in this menu are identical
to settings defined in TV picture menu under “Main
Menu System”.
Configuring Sound Settings
Sound settings can be configured according to your
personal preferences.
Press “MENU” button and select the Sound icon
by using “ ” or “ ” button. Press OK button to view
Sound Settings menu.
Sound,Settings and Source settings are identical to
the settings explained in main menu system.
PC Position: Select this to display PC position menu
items.
Autoposition: Automatically optimizes the display.
Press OK to optimize.
H Position: This item shifts the image horizontally to
right hand side or left hand side of the screen.
Operating Sound Settings Menu Items
V Position: This item shifts the image vertically
towards the top or bottom of the screen.
• Use “ ” or “ ” button to set an item.
Dot Clock: Dot Clock adjustments correct the
interference that appear as vertical banding in
dot intensive presentations like spreadsheets or
paragraphs or text in smaller fonts.
Phase: Depending on the resolution and scan frequency
that you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error.
• Press “ ” or “ ” button to highlight a menu item.
• Press “MENU” button to exit.
Sound Settings Menu Items
Volume: Adjusts volume level.
Equalizer: Press OK button to view equalizer submenu.
In the equalizer menu, the preset can be changed
to Music, Movie, Speech, Flat, Classic and User.
Press the “MENU” button to return to the previous
menu.
Note: Equalizer menu settings can be changed
manually only when the Equalizer Mode is in User.
Balance: This setting is used for emphasizing left or
right speaker balance.
Headphone: Sets headphone volume.
English - 63 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 63
22.08.2011 15:50:45
Sound Mode: You can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL: Automatic Volume Limiting (AVL) function sets the
sound to obtain fixed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Dynamic Bass: Dynamic Bass is used to increase
bass effect of the TV set.
Digital Out: Sets digital out audio type.
Configuring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
Press “MENU” button and select Settings icon by
using “ ” or “ ” button. Press OK button to view
Settings menu.
Using a Conditional Access
Module (not included)
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
• In order to watch certain digital channels, a conditional
access module (CAM) may be necessary. This module
must be inserted in the CI slot of your TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• When no module is inserted, “ No Common
Interface module detected” message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Operating Settings Menu Items
• Press “ ” or “ ” button to highlight a menu item.
Press “MENU” button and select the icon by using
“ ” or “ ” button. Press OK button to view Settings
menu. Use “ ” or “ ” button to highlight Conditional
Access and press OK to view menu items.
• Press OK button to select an item.
• Press “MENU” button to exit.
Settings Menu Items
Conditional Access: Controls conditional access
modules when available.
Language: Configures language settings.
Parental: Configures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: Sets date and time.
Sources: Enables or disables selected source
options.
Other Settings: Displays other setting options of
the TV set.
English - 64 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 64
22.08.2011 15:50:46
Language Settings
Configuring Language
Preferences
You can operate the TV’s language settings using
this menu.
Press “MENU” button and select the Settings icon
by using “ ” or “ ” button. Press OK button to view
Settings menu. Use “ ” or “ ” button to highlight
Language and press OK to continue:
In the configuration menu, highlight the Language
Settings item by pressing “ ” or “ ” buttons. Press
OK and Language Settings submenu will be displayed
on the screen:
Use “ ” or “ ” button to set an item. Settings are
stored automatically.
Menu: displays the system language.
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
Notes:
Preferred
• System Language determines the on-screen menu
language.
These settings will be used if available. Otherwise the
current settings will be used.
• Audio Language is used for selecting the soundtrack
of a channels.
• Audio: Sets the preferred audio language.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
• Subtitle : Sets the subtitle language. Selected
language will be seen in subtitles.
• Teletext: Sets teletext language.
Parental Control
• Guide: Sets the preferred Guide language.
Current (*)
(*) These settings can be changed if only the
broadcaster supports. Otherwise, settings will not be
available to be changed.
• Audio: Changes the audio language for the current
channel.
• Subtitle: Sets the subtitle language for the current
channel.
To prohibit viewing of certain programmes, channels
and menus can be locked by using the parental
control system.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Press “MENU” button and select the Settings icon
by using “ ” or “ ” button. Press OK button to view
Settings menu. Use “ ” or “ ” button to highlight
Parental and press OK to continue:
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
To display parental lock menu options, the PIN number
should be entered. The factory default PIN number
is 0000.
English - 65 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 65
22.08.2011 15:50:46
After coding the correct PIN number, parental settings
menu will be displayed:
Timers
To view Timers menu, press “MENU” button and
select Settings icon by using “ ” or “ ” button.
Press OK button to view Settings menu. Use “ ”
or “ ” button to highlight Timers and press OK to
continue:
Setting Sleep Timer
This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using “ ” or “ ” button.
• Use “ ” or “ ” button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.
Parental Settings Menu Operation
• Select an item by using “ ” or “ ” button.
Setting Programme Timers
• Use “ ” or “ ” button to set an item.
• Press OK button to view more options.
You can set programme timers for a particular
programme using this feature.
Menu Lock (optional): Menu lock setting enables or
disables the menu access. You can disable access to
the installation menu or the whole menu system.
Press “ ” button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.
Maturity Lock (optional): When set, this option
gets the maturity information from the broadcast and
if this maturity level is disabled, disables access to
the broadcast.
Adding a Timer
Child Lock (optional): When Child Lock is set, the TV
can only be controlled by the remote control. In this
case the control panel buttons will not work. Hence,
if one of those buttons is pressed, Child Lock Is On
will be displayed on the screen when the menu screen
is not visible.
Set PIN: Defines a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to enter your new pin a second time for verification
purposes.
IMPORTANT: The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.
• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel: Changes network type by using “ ” or “ ”.
Timer Type: This feature is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Repeat: Sets a timer to be repeated as Once, Daily or
Weekly. Use “ ” or “ ” buttons to select an option.
• Press GREEN button to save the timer. Press RED
button to cancel.
Change/Delete:Controls parental settings on timers.
Editing a Timer
• Select the timer you want to edit by pressing “ ”
or “ ” button.
• Press GREEN button. Edit Timer menu screen will
be displayed.
• When finished with editing, press GREEN button to
save. You can press “MENU” button to cancel.
English - 66 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 66
22.08.2011 15:50:47
Deleting a Timer
• Select the timer you want to delete by pressing “
” or “ ” button.
• Press RED button.
Configuring Source Settings
You can enables or disable selected source options. The
TV will not switch to the disabled source options when
“SOURCE” button is pressed.
• Select YES by using “ ” or “ ” buttons to delete the
timer. Select NO to cancel.
Configuring Date/Time Settings
Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
(optional)
• Use “ ” or “ ” buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
• Select Sources in the Settings menu and press OK
button.
Use “ ” or “ ” buttons to highlight the Time Settings
Mode. Time Settings Mode is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL.
• Press“ ” or “ ” buttons to select a source.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
• Use “ ” or “ ” button to enable or disable the
selected source. Changes are automatically
stored.
Note: YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
• Changes are automatically stored. Press “MENU”
to exit.
English - 67 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 67
22.08.2011 15:50:47
Configuring Other Settings
To view general configuration preferences, select Other
Settings in the Settings menu and press OK button.
Audio Description: Audio description refers to
an additional narration track for blind and visually
impaired viewers of visual media, including television
and movies. The description narrator talks through
the presentation, describing what is happening on the
screen during the natural pauses in the audio (and
sometimes during dialogue, if deemed necessary).
You can use this feature, only if the broadcaster
supports that additional narration track.
Auto TV Off: You can set the timeout value of auto off
feature.After the timeout value is reached and the TV
is not operated for selected time, the TV will go off.
Standby Search (optional): Use “ ” or “ ” button
to select Standby Search and then press “ ” or “
” button to set this setting as On or Off. If you
change Standby Search to Off, this function will be
unavailable.To use Standby search please make sure
that you select Standby Search as On.
Other Features
Operation
• Press “ ” or “ ” buttons to select an item.
• Use “ ” or “ ” button to set an option.
• Press OK button to view a sub-menu.
Menu Timeout: Changes timeout duration for menu
screens.
Scan Encrypted Channels: When this setting is on,
search process will locate the encrypted channels as
well. If it is set as Off, encrypted channels will not be
located in automatic search or manual search.
Displaying TV Information: Programme Number,
Programme Name, Sound Indicator, time, teletext,
channel type and resolution information is displayed
on the screen when a new programme is entered or
“INFO” button is pressed.
Mute Function: Press “ ” button to disable sound.
Mute indicator will be displayed in the upper side of
the screen. To cancel mute, there are two alternatives;
the first one is pressing the “ ” button and the second
one is increasing the volume level.
Blue Background (Optional): Activates or deactivates
blue background system when the signal is weak or
absent.
Picture Mode Selection: By pressing PRESETS
button, you can change Picture Mode settings in
accordance with your viewing requirements. Available
options are Dynamic, Natural, Cinema and Game.
Software Upgrade: To ensure that your TV always
has the most update information, you can use this
setting. In order for the proper operation, please
ensure that the TV is set to standby mode.
Displaying Subtitles: You can enable subtitles by
pressing the SUBTITLE button of the remote control.
Press SUBTITLE button again to disable subtitle
function.
If “Subtitle” is On, pressing the “
” button causes
the following warning message display on the screen
(** for UK only).
You can enable or disable automatic upgrade by
setting Automatic Scanning option.
You can manually search for new software by
selecting Scan for upgrade.
Application version: Displays the current application
version.
Hard of Hearing: If the broadcaster enables any
special signal concerning the audio, you can set this
setting as On to receive such signals.
English - 68 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 68
22.08.2011 15:50:48
Teletext
Tips
The teletext system transmits information such as
news, sports and weather on your TV. Note that if the
signal degrades, for example in poor/adverse weather
conditions, some text errors may occur or the teletext
mode may be aborted.
Teletext function buttons are listed below:
Screen Care: Clean the screen with a slightly damp,
soft cloth. Do not use abrasive solvents as they may
damage the coating layer of the TV screen. For your
safety, unplug the mains plug when cleaning the set.
When moving the TV, hold it properly from the bottom
of the unit.
“
” Teletext / Mix: Activates teletext mode when
pressed once. Press again to place the teletext screen
over the programme (mix).Pressing again will quit the
teletext mode.
Image Persistence: Please note that ghosting may
occur while displaying a persistent image. On LED
TVs’ image persistence may disappear after a short
time. Try turning the TV off for a while.
“RETURN” Index: Selects the teletext index page.
To avoid this, do not leave the screen in still picture
for extended periods.
“INFO”Reveal: Shows hidden information (e.g.
solutions of games).
“OK” Hold: Holds a text page when convenient. Press
again to resume.
“ ”/“ ” Subcode Pages: Selects subcode pages if
available when the teletext is activated.
P+ or P- and numbers (0-9): Press to select a page.
Note: Most TV stations use code 100 for their index
pages.
Coloured Buttons (RED/GREEN/YELLOW/
BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics. When
FASTEXT system is available, sections in a teletext
page will become colour-coded and can be selected
by pressing the coloured buttons. Press a coloured
button that corresponds to with your needs. The
coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing “ ” or “ ” commands will request
the next or previous page respectively.
No Power: If your TV system has no power, please
check the main power cable and connection to the
mains socket outlet.
Poor Picture: Have you selected the correct TV
system? Is your TV set or house aerial located too close
to a non-earthed audio equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune the
channels. The picture quality may degrade when two
peripherals are connected to the TV at the same time.
In such a case, disconnect one of the peripherals.
No Picture: Is the aerial connected properly? Are the
plugs connected tightly to the aerial socket? Is the
aerial cable damaged? Are suitable plugs used to
connect the aerial? If you are in doubt, consult your
dealer. No Picture means that your TV is not receiving
a transmission. Have you selected the correct button
on the remote control? Try once more. Also make sure
the correct input source has been selected.
Sound: If you cannot hear any sound, check to see if
the “ ” button has been pressed. If sound is coming
from only one speaker, check if the audio balance has
been set to one extreme.
Remote Control: Your TV no longer responds to the
remote control. Perhaps the batteries are exhausted.
If so you can still use the local buttons on the TV.
Input Sources: If you cannot select an input source,
it is possible that no device is connected. Check
the AV cables and connections if you have tried to
connect a device.
English - 69 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 69
22.08.2011 15:50:49
Appendix A: PC Input Typical
Display Modes
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types)
The display has a maximum resolution of 1920 x 1200.
The following table is an illustration of some of the
typical video display modes. Your TV may not support
different resolutions. Supported resolution modes are
listed below. If you switch your PC to an unsupported
mode, a warning OSD will appear on the screen.
Index
Resolution
Frequency
1
640x350
85 Hz
2
640x400
70 Hz
3
640x480
60Hz-66Hz-72Hz
-75Hz-85Hz
800x600
56Hz-60Hz-70Hz-72Hz
-75Hz-85Hz
4
5
6
Source
75 Hz
1024x768
60Hz-66Hz-70Hz-72Hz
-75Hz
Available
PAL 50/60
O
EXT
NTSC 60
O
(SCART)
RGB 50
O
RGB 60
O
PAL 50/60
O
Side AV
832x624
Supported Signals
YPbPr
NTSC 60
O
480I
60Hz
O
480P
60Hz
O
576I
50Hz
O
576P
50Hz
O
720P
50Hz
O
720P
60Hz
O
1080I
50Hz
O
7
1152x864
60Hz-70Hz-75Hz
-85 Hz
1080I
60Hz
O
8
1280x768
60 HzA
1080P
50Hz
O
9
1280x768
60 HzB
1080P
60Hz
O
10
1280x768
75Hz-85Hz
480I
60Hz
O
11
1280x960
60Hz-75Hz-85Hz
480P
60Hz
O
12
1280x1024
60Hz-75Hz-85Hz
576I
50Hz
O
13
1360x768
60 Hz
576P
50Hz
O
14
1400x1050
60 HzA
720P
50Hz
O
15
1400x1050
60 HzB
720P
60Hz
O
16
1400x1050
75Hz-85Hz
1080I
50Hz
O
17
1400x900
65Hz-75Hz
1080I
60Hz
O
18
1600x1200
60 Hz
1080P
24Hz
O
19
1680x1050
60 Hz
1080P
25Hz
O
20
1920x1080
60 HzA
1080P
30Hz
O
21
1920x1080
60 HzB
1080P
50Hz
O
22
1920x1200
60HzA
1080P
60Hz
O
23
1920x1200
60Hz
HDMI1
(X: Not Available, O: Available)
In some cases a signal on the LED TV may not
be displayed properly. The problem may be an
inconsistency with standards from the source
equipment (DVD, Set-top box, etc. ). If you do
experience such a problem please contact your dealer
and also the manufacturer of the source equipment.
English - 70 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 70
22.08.2011 15:50:49
Appendix D: Software Upgrade
Appendix C: Supported DVI
Resolutions
When connecting devices to your TV’s connectors by
using DVI to HDMI cables (not supplied), you can refer
to the following resolution information.
Index
Resolution
Frequency
1
640x400
70Hz
2
640x480
60Hz-66Hz-72Hz
-75Hz
3
800x600
56Hz-60Hz-70Hz72Hz -75Hz
4
832x624
75 Hz
5
1024x768
60Hz-66Hz-70Hz72Hz -75Hz
6
1152x864
60Hz-70Hz-75Hz
7
1152x870
75Hz
8
1280x768
60 HzA
60 HzB
9
1280x768
10
1280x768
75Hz
11
1280x960
60Hz-75Hz
12
1280x1024
60Hz-75Hz
13
1360x768
60 Hz
14
1400x1050
60 HzA
60 HzB
15
1400x1050
16
1400x1050
75Hz
17
1400x900
65Hz-75Hz
18
1600x1200
60 Hz
19
1680x1050
60 Hz
20
1920x1080
60 HzA
21
1920x1080
60 HzB
22
1920x1200
60HzA
23
1920x1200
60Hz
24
480i-480p
60Hz
25
576i-576p
50Hz
• Your TV is capable of finding and updating new
software upgrades over broadcast channels.
• For broadcast channels search, the TV looks at the
available channels stored in your settings. So before
the software upgrade search, it is advised to auto
search and update all available channels.
1) Software upgrade search via user
interface
• It is possible to manually to check if there is a new
software upgrade for your TV set.
• Simply navigate on your main menu. Choose
Settings and select Other Settings menu. In Other
Settings menu navigate on to the Software Upgrade
item and press OK button to open Upgrade Options
menu.
• In Upgrade Options menu select Scan for upgrade
and press OK button.
• If a new upgrade is found, it starts to download the
upgrade. A progress bar indicates the remaining
download progress. When the download completes
successfully a message is displayed for reboot to
activate new software. Press OK to continue with
the reboot operation.
2) 3.AM search and upgrade mode
• If Automatic scanning in Upgrade Options menu is
enabled, the TV wakes up at 03:00 and searches
the broadcast channels for new software upgrade. If
new software is found and downloaded successfully,
with the next power up the TV opens with new
software version.
Note on reboot operation: Reboot is the last step
in software upgrade operation if download of new
software is finished successfully. During reboot TV
makes final initializations. In the reboot sequence
panel power is closed and front led indicates the
activity with blinking. Around 5 minutes later TV
restarts with new software activated.
• If your TV fails to restart in 10 minutes, unplug power
for 10 minutes and re-plug again. TV should open
with new software safely. If you still can not get
TV working, please kindly repeat unplug and plug
sequence a few times more. If your set still can not
operate, please call the service personnel to fix the
problem for you.
Caution: While the LED is blinking during reboot do
not unplug your TV’s power. Doing this may cause
your TV not to re-start again and can only be fixed
by service personnel.
English - 71 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 71
22.08.2011 15:50:49
Appendix E : Supported File Formats for USB Mode
Media
Video
MPEG1, 2
.dat
MPEG1, 2
.vob
MPEG2
Movie
Music
Photo
Format
File
Extension
.mpg, .mpeg
MPEG2
MPEG2
PCM/MP3
.avi
Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03,
Xvid 1.10-beta1/2
PCM
.mp3
-
MPEG 1 Layer 1 / 2
(MP3)
.jpg .jpeg
Baseline JPEG
Remarks
(Maximum resolution/Bit rate etc.)
MAX 1920x1080 @ 30P 20Mbit/sec
MAX 1920x1080 @ 30P 20Mbit/sec
32Kbps ~ 320Kbps(Bit rate)
32KHz ~ 48KHz(Sampling rate)
max WxH = 15360x8640
4147200bytes
Progressive JPEG
max WxH = 1024x768
6291456bytes
-
max WxH = 9600x6400
3840000bytes
.bmp
Subtitle
Audio
MPEG Layer 1/2/3
.sub
-
.srt
-
Information for Users on Disposal of old Equipment and
Batteries
[European Union only]
Battery
Products
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates that this
battery contains lead.
English - 72 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 72
22.08.2011 15:50:50
Specifications
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
NUMBER OF PRESET CHANNELS
1000
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
110-240V AC, 50/60 Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWER (WRMS.) (10% THD)
2 x 2,5
POWER CONSUMPTION (W)
47 W (max)
PANEL
16:9 display, 24” Screen Size
DIMENSIONS (mm)
DxLxH (With foot): 135 x 579 x 408
Weight (Kg): 5
DxLxH (Without foot): 35 x 579 x 372
Weight (Kg): 4,80
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile
for UK
Frequency range: 474-850 MHz for UK models
Digital
Reception
DVB-T
170-862 MHz for EU models
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
English - 73 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 73
22.08.2011 15:50:50
MOBIL TV INSTRUCTION MANUAL
Switching the TV On Using 12 Volt
1. Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to
the battery of car, making sure to observe the correct polarity.
2. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights
up.
3. Press the “ ” button, P+ / P- or a numeric button on the remote control or press the “
button on the TV. The TV will then switch on.
” button, - or +
4. Adjust for best picture through antenna position or set TV channels again if necessary.
Switching the TV Off
1. Press the “ ” button on the remote control or press the “
standby mode.
” switch on the TV, so the TV will switch to
2. Unplug cable connectors and power plugs.
ATTENTION: 12 V Input :
V+
V+
V-
V-
English - 74 -
A02_MB62_[GB]_(01_TV)_woypbpr_IDTV_BRONZE19_1900UK_24912WLED_10075162_50199152.indd 74
22.08.2011 15:50:50
Features
Contents
Features ............................................................... 75
General Properties............................................ 75
Safety Information ................................................ 76
Notes on Discs ..................................................... 76
On handling discs ............................................. 76
On cleaning....................................................... 76
Licence Notification .............................................. 76
How to Watch a DVD ............................................ 76
DVD Control Panel Buttons .................................. 77
Overview of the Remote Control .......................... 77
General Operation ................................................ 78
General Playback ................................................. 79
Basic Play ......................................................... 79
For your reference: ....................................... 79
Notes on Playback: ........................................... 79
Setup Menu Items ................................................ 79
Vıdeo Setup Page............................................. 79
TV Type......................................................... 79
DivX VOD ..................................................... 79
Language Setup ............................................... 79
OSD LANG ................................................... 79
AUDIO .......................................................... 79
DISC MENU .................................................. 79
SUBTITLE ..................................................... 79
Preferences ...................................................... 80
DEFAULT ...................................................... 80
DOWNMIX .................................................... 80
PASSWORD (Change Password): ............... 80
SPDIF OUTPUT............................................ 80
Troubleshooting .................................................... 80
The picture quality is poor (DVD)...................... 80
Disc does not play ............................................ 80
Wrong OSD language....................................... 80
Some functions (Angle, Zoom etc) do not work 81
No picture ......................................................... 81
No sound .......................................................... 81
Distorted sound................................................. 81
No response from remote control ..................... 81
If nothing works................................................. 81
Definition of Terms ................................................ 81
Disc Types Compatible with This Unit .................. 82
Supported File Formats ........................................ 83
Specifications ....................................................... 83
General Properties
• DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG
/ DivX playback.
• NTSC/PAL playback (according to disc content)
• LPCM audio via coaxial digital audio output.
(optional)
• Multi-Audio (up to 8) support (According to disc
content)
• Multi-Subtitle (up to 32) support (According to disc
content)
• Multi-Angle (up to 9) support (According to disc
content)
• 8 level parental control
• Fast forward and rewind in 5 different speeds. (2x,
4x, 8x, 16x, 32x)
• Slow motion playback in 4 different speeds. (1/2x,
1/4x, 1/8x, 1/16x forward)
• Frame by frame forward playback.
• Search Mode
• Repeat
• Coaxial audio output (optional)
• Copied disks may be incompatible.
Note
• This DVD player may not support some MP3
recordings due to differences in recording formats
or disc type.
• Please read the owner’s manual about MP3 playback.
• CD-R/CD-RW discs recorded by CD-DA method
can be played. Some CD-R/CD-RW discs may be
incompatible due to laser pick-up and disc design.
• DVD-R/RW discs recorded by DVD-Video method
can be played . Some DVD-R/RW discs may be
incompatible due to laser pick-up and disc design.
• Some discs may be incompatible with JPEG Viewer
function due to different recording format or
condition of the discs.
• For proper operation, only 12 cm discs must be
used.
English - 75 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 75
22.08.2011 14:47:31
On cleaning
Safety Information
CAUTION
DVD Player is a class 1 laser product. However this
product uses a visible laser beam which could cause
hazardous radiation exposure. Be sure to operate the
player correctly as instructed.
• Before playing, clean the disc with a cleaning cloth.
Wipe the disc from the center out.
CLASS 1
LASER PRODUCT
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock of persons.
Licence Notification
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Rovi Corporation. Reverse
engineering and disassembly are prohibited.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
How to Watch a DVD
Notes on Discs
When placing a disc into the loader, labeled side of
the disc should be on the front:
On handling discs
• To keep the disc clean, handle the disc by its edge.
Do not touch the surface.
• Do not stick paper or tape on the disc.
• If the disc is contaminated with any substance like
glue remove before using it.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature can rise
quickly and damage the disc.
When TV set is turned on, first switch to DVD source
by using the SOURCE button on the remote control.
Press play on the remote control, or directly press play
button at the front panel. If there is no disc inside the
loader, place a DVD first and press play.
• After playing, store the disc in its case.
English - 76 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 76
22.08.2011 14:47:32
DVD Control Panel Buttons
A. Disc loader
B. Play / Pause
Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as
“button select” (selects the highlighted item in menu) if this is not prohibited by the disc.
C. Stop / Eject
Stop playing disc / Eject or Load the disc Note:
• You cannot eject the disc via the remote control.
• While playing a file, you should press STOP button three times to eject.
Overview of the Remote Control
1. Standby
2. Numeric buttons
INFO
3. Return back
4. Language selection (Set language)
SLEEP
SCREEN
SOURCE
PRESETS
5. Display time / DVD menu
6. Clear
7. Stop
8. No function
9. Rapid Reverse
10. Rapid advance
RETURN
11. Info
MENU
12. Zoom
13. Repeat
14. Root
15. Menu
16. Title
17. OK / Select
18. Navigation Buttons
19. Subtitle
20. Angle
21. Search mode
FAV
22. Play
23. Pause
LANG.
SUBTITLE
EPG
/
24. Skip next
25. Skip previous
English - 77 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 77
22.08.2011 14:47:32
General Operation
You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote
control. Below are main functions of commonly used remote control buttons.
Buttons on the
Remote Control
/
Movie
Playback
Picture
Playback
Music
Playback
Play
Play
Play
Play
Pause
Pause
Pause
Pause
Stop
Stop
Stop
Stop
/
Skip
Skip
Previous / Next Previous / Next
backward/forward
backward/forward
Shifts the zoomed picture left or right (if available).
/
Highlights a menu item. / Shifts the zoomed picture down or up (if available).
/
ANGLE
C
DISPLAY
INFO
LANG.
MENU
Fast reverse / Fast forward
Changes slide
Views the scene from different angles (if effect (depends
X
available).
on the
content).
Clears digit (if available).
Displays time / Views main setup menu
Time counter mode selection (during playback). Press repeatedly to switch
between modes.
Audio language.
X
X
Displays TV menu.
OK / SELECT
REPEAT
Enter / View / Play
Displays repeat options.
RETURN
Returns back to the previous menu (if available).
Goes back to the root folder (if available).
Selects the
Selects the
Direct selection of scenes or time.
desired file.
desired file.
Subtitle on-off. Press repeatedly to switch
X
X
between subtitle options.
ROOT
SEARCH MODE (*)
SUBTITLE
TITLE
ZOOM
[
DVD
Playback
+
+
+
+
+
+
]
+
Displays disc menu
(if available).
Displays disc menu
(if available).
X
X
Zooms picture. Press repeatedly to switch between zoom options.
Other Functions – Button Combinations
(During playback)
Slow forward.
Sets slow forward speed.
Sets fast forward speed.
Sets fast reverse speed.
Confirms stop command.
Press
repeatedly to advance manually.
(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to
switch one digit titles (example: to select 5, press 0 and 5).
English - 78 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 78
22.08.2011 14:47:33
11. Reverse stepping is not available.
General Playback
12. For your convenience:
Basic Play
1. Press on the power button
2. Please insert a disc to the loader.
The disc will be automatically loaded and play
commences if the disc does not have any menus
recorded on it.
A menu may appear on the TV screen after a few
moments or the film may start immediately after the
introduction of the Film Company. This behaviour
depends on the disc content and may change.
If you attempt to enter a number greater than the total
time of the current title, the time search box disappears
and “
Input Invalid” message appears on up-left
corner of screen.
13. Slide Show is disabled when the ZOOM mode
is on.
Setup Menu Items
Vıdeo Setup Page
Note: Step 3 and 4 is available only when a menu is
recorded on the disc.
3. Press “ ” / “ ” / / or the number button
(s) to select the preferred title.
4. Press SELECT.
Play of the selected items now starts.The played item
may be a motion picture, a still picture or another
submenu depending on the disc.
For your reference:
TV Type
If an action corresponding to a button is prohibited the
TV Type is only available as ‘PAL’. The TV set also
supports NTSC signal; however, the signal will be
converted to PAL when it appears on the screen.
“
” symbol appears.
Notes on Playback:
DivX VOD
1. No sound will be heard during Rapid advance
or Rapid reverse.
DivX VOD provides the convenience of streaming
video in terms of quality and performance.
2. No sound will be heard during Slow motion play.
Language Setup
3. Reverse slow motion play is not available.
4. In some cases, the subtitle language is not
changed immediately to the selected one.
5. When the preferred language is not selected even
after pressing the button several times, it means
that the language is not available on the disc.
6. When the player is restarted or the disc is
changed, the subtitle selection is automatically
changed back to the initial settings.
7. If a language is selected, not supported by the
disc, the subtitle language will automatically be
set to the disc’s priority language.
8. Usually a circulation will happen while switching
to another language, that is you can cancel
the subtitle by pressing this button a number of
times until “Subtitle Off” appears on the screen.
9. When the power is turned on or the disc is
removed, the language heard is the one
selected at the initial settings. If this language
is not recorded on the disc, only the available
language on the disc will be heard.
10. Some DVDs may not contain root and/or title
menus.
OSD LANG
You can select the default OSD language of the
player menus
AUDIO
You can select the default audio language if supported
by the DVD disc.
DISC MENU
You can select the DVD’s disc menu language among
these languages. Disc menu appears in the selected
language, if supported by the DVD disc.
SUBTITLE
You can select the default subtitle language if
supported by the DVD disc.
English - 79 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 79
22.08.2011 14:47:34
Preferences
SPDIF OUTPUT
DEFAULT
You can set Spdif Output as PCM or RAW. If you select
PCM from SPDIF Output in DVD menu and play DVD
with Dolby audio, you can get audio output with two
channels via the speakers and the SPDIF Out. If you
select RAW from SPDIF Output in DVD menu and play
DVD with Dolby audio, speakers will be muted and you
can get 5+1 Dolby audio via the SPDIF Out.
If you choose RESET and press SELECT, the factorypresets are loaded. Parental level and parental
password does not change.
DOWNMIX
This mode can be selected when the digital audio
output of the TV is used.
SURROUND: Surround sound output.
Troubleshooting
The picture quality is poor (DVD)
STEREO: Two channels stereo.
• Make sure the DVD disc surface is not damaged.
(Scratch, fingerprint etc.)
PARENTAL (Parental Level)
• Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean
your disc properly.
• Ensure that the DVD disc is in the drawer with the
label uppermost.
• A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by to dry
the equipment.
Playing some DVDs can be limited depending on the
age of users. The “Parental Control” function allows
playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight
levels. Level “8 ADULT” adjustment let you watch all of
the DVD titles ignoring the DVD disc’s parental level.
You can watch the DVD discs, which has the same or
lower parental level than the player’s level only.
PASSWORD (Change Password):
Disc does not play
• No disc in the machine.
Place a disc into the loader.
• Disc incorrectly loaded.
Ensure that the DVD disc is in the drawer with the
label uppermost.
• Wrong type of disc. The machine cannot play CDROMS etc.
Using this item you can change the current
password.
• The region code of the DVD must match the
player.
To change the password you will be prompted to
enter your old password. After you have entered
your old password, you can now enter the new 4-digit
password.
Wrong OSD language
You can use C key to delete the incorrect entry.
Note: Factory preset of the password is “0000”. You
have to enter XXXX digital password every time you
want to change the parental level. If you forget your
password please contact technical service.
• Select the language in the set-up menu.
• The language for the sound or subtitles on a DVD
cannot be changed.
• Multilingual sound and/or subtitles not recorded on
the DVD.
• Try to change the sound or subtitles using DVD’s title
menu. Some DVD’s do not allow the user to change
these settings without using the disc’s menu
English - 80 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 80
22.08.2011 14:47:34
Some functions (Angle, Zoom etc) do
not work
• These functions are not available on the DVD.
• Angle can only be changed when the angle symbol
is displayed.
No picture
• Have you pressed the correct buttons on the remote
control? Try once more.
DVD has a structure consisting of two 0.6-mm thin
discs, which are adhered to each other. Since the
thinner the disc, the higher the density at which the
information can be recorded, a DVD disc has a greater
capacity than a single 1.2 mm thick disc. Since the
two thin discs are adhered to each other, there is the
potential to achieve double-sided play sometime in
the future for even longer duration play.
Subtitles
These are printed lines appearing at the bottom of
the screen, which translate or transcribe the dialogue.
They are recorded on the DVD discs.
No sound
• Check the volume is set to an audible level.
• Make sure you have not switched the sound off
accidentally.
Distorted sound
• Check that the appropriate listening mode setting
is correct.
No response from remote control
• Make sure the remote control is in the correct
mode.
• Check batteries are fitted correctly.
• Change the batteries.
Time Number
This indicates the playtime, which has elapsed from
the start of a disc or a title. It can be used to find a
specific scene quickly. (Not all discs permit the time
search feature to be used. Availability is determined
by the disc’s manufacturer.)
Title Number
These numbers are recorded on DVD discs. When a
disc contains two or more movies, these movies are
numbered as title 1, title 2, etc.
Track Number
If nothing works
If you have tried the above solutions and none seem
to work, try switching your TV-DVD off and on again.
If this does not work, contact your supplier or TV-DVD
repair technician. Never attempt to repair a defective
TV-DVD yourself.
Definition of Terms
These numbers are assigned to the tracks, which are
recorded on AudioCDs. They enable specific tracks
to be located quickly.
LPCM
LPCM stands for Pulse Code Modulation and is
digital audio.
MPEG
Angle
Recorded onto some DVD discs are scenes, which
have been simultaneously shot from a number of
different angles (the same scene is shot from the
front, from the left side, from the right side, etc.). With
such discs, the ANGLE button can be used to view
the scene from different angles.
Chapter Number
Short for Moving Picture Experts Group. This is an
international standard for compression of moving
images. On some DVDs digital audio has been
compressed and recorded in this format.
DivX
DivX is a digital video compression technology based
on MPEG-4 and developed by DivX Networks Inc.
These numbers are recorded on DVD discs. A title
is subdivided into many sections, each of which are
numbered, and specific parts of video presentations
can be searched quickly using these numbers.
DVD
This refers to a high-density optical disc on which
high-quality pictures and sound have been recorded
by means of digital signals. Incorporating a new video
compression technology (MPEG II) and high-density
recording technology. DVD enables aesthetically
pleasing full-motion video to be recorded over long
periods of time (for instance, a whole movie can be
recorded).
English - 81 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 81
22.08.2011 14:47:34
Disc Types Compatible with This Unit
D is c Ty p e s
(L o g o s )
R e c o r d in g
Ty p e s
D is c S iz e
M ax.
P la y in g
T im e
DVD
C h a r a c t e r is tic s
.
A u d io
+
V id e o
12 cm
•
D V D c o n ta in s e x c e lle n t s o u n d a n d v id e o
•
V a r io u s s c r e e n a n d a u d io fu n c t io n s c a n b e
S i n g le s id e d ; 2 4 0 m in .
D o u b le s id e d ; 4 8 0 m in
d u e to D o lb y D ig i ta l a n d M P E G - 2 S y s te m .
e a s ily s e l e c t e d t h r o u g h th e o n s c r e e n
m e nu .
A U D IO -C D
• A n L P is r e c o r d e d a s a n a n a lo g s ig n a l w ith
m o r e d is t o rtio n . C D is r e c o r d e d a s a
A u d io
12 cm
D ig ita l S ig n a l w ith b e t te r a u d i o q u a lity,
7 4 m in .
le s s d is t o r t io n a n d le s s d e t e rio ra t io n o f
a u d io q u a lit y o v e r t im e .
D I G IT A L A U D I O
M P 3 -C D
12 cm
READABLE
•
A u d io
(x x x x .m p 3 )
M P 3 is r e c o r d e d a s a D ig ita l S ig n a l w it h
b e tt e r a u d io q u a lity, le s s d is to rt i on a n d
le s s d e t e rio ra t io n o f a u d io q u a lity
o v e r tim e .
P IC T U R E -C D
JR EPA DE
G
ABLE
V id e o
(s t ill p ic tu r e )
12 cm
A u d io
+
V id e o
12 cm
•
J P E G is r e c o rd e d a s a D ig it a l S ig n a l w ith
b e tt e r p ic tu re q u a lity o v e r t im e .
D iv X
•
V id e o & A u d io w ith M P E G -4 C o m p r e s s io n
te c h n o lo g y.
English - 82 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 82
22.08.2011 14:47:34
Supported File Formats
Media
File
Extension
.mpg/ .dat/
.vob
Movie
(optional)
.avi
-
Music
Format
Remarks
Video
Audio
(Maximum resolution/Bit rate etc.)
MPEG1
MPEG Layer
1/2/3
MPEG2
MPEG2
XviD/ 3ivx
PCM/MP3
MPEG4
PCM/MP3
MS ISO
MPEG4
PCM/MP3
Support SP and ASP
PCM
Sample Rate: 8K ~ 48KHz
-
MPEG 1/2
.mp3
-
Sample Rate: 8K ~ 48KHz, Bit Rate:
64K~320Kbps
Layer 1/2/3
(MP3)
WxH = 8902x8902 up to 77Mega-pixel
Baseline JPEG
Photo
XviD Verson up to: 1.1.2 / DivX 3.1.x, 4.x, 5.x
Support format: 444/ 440/ 422/ 420/ Grayscale
.jpg
Up to 4 Mega-pixel
Progressive JPEG
Support format: 444/ 440/ 422/ 420/ Grayscale
.srt
.smi
External
Subtitles
.sub
(optional)
.ssa
Support Text File Format, but do not support
Picture File Format
.ass
Note: It is not guaranteed that all DivX formats are supported.
Specifications
DVD: SS/SL 4.7” (DVD-5)
Types of Discs
Supported
CD-DA
SS/DL 4.7” (DVD-9)
CD-R
DS/SL 4.7” (DVD-10)
CD-RW
DS/DL 4.7” (DVD-18)
MP-3/JPEG
MPEG-2 Video Standard Decoding (MPEG-1 supported)
Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC) pixels
Video Type
50 and 60 Hz frame refresh rates (PAL & NTSC)
Digital bit-stream processing rate up to 108Mbits/sec
Line resolution more than 500 lines
Audio Type
Audio Output
MPEG Multichannel Decoding
LPCM
Analog Outputs:
24 bit /48, 44.1kHz down-sampling DAC
English - 83 -
A02_MB62_[GB]_(02-DVD)_WDIVX_1900UK_10075161_50199150.indd 83
22.08.2011 14:47:34
Download PDF

advertising