ALCATEL Mobile Phones Temporis 23 Telephone User Manual

If youcommon
have anytype
questions
or problems,
consult
the Troubleshooting
most
of phone
jack and might
look
Tipsthe
for one
the solution.
like
pictured here. If you don't have a modular jack, call your local phone company to find
outARTS
how to getHECKLIST
one installed.
Your package should contain the following items:
P
C
EFORE YOUTHE
BEGIN
IBNSTALLING
PHONE
Your
telephone should
beR
placed
on a level surface such as a
M
ODULAR
J
ACK
EQUIREMENTS
desk or table top, or you can mount it on a wall, A desktop/wall
F
INSTALLING THE PHONE
R
You need an RJ11 type modular jack, which is the
mounting
pedestal
into
theand
base
of the
phone.
most common
type is
ofbuilt
phone
jack
might
look
like the one pictured here.
If you don't have a mo3
4
dular jack, call your local phone company to find
out how to get one installed.
User’s Guide
Your telephone should be placed on a level surface such as a
desk or table top, or you can mount it on a wall,
A desktop/wall
2
mounting pedestal is built into the base of
the phone.
1
3
4
Handset
Base
1. Slide the RINGER volume (on the base) to the desired volume.
EFORE
OU switch
EGINto TONE if you use Touch-Tone
2. Slide
the PULSE/TONE
Thomson Telecom
Model
Temporis
23-RS
Service;
set it to
PULSE if you have rotary service.
ODULAR
ACK
EQUIREMENTS
46 quai Alphonse le Gallo
00030362
(Rev.1
R/E)
3.You
Plug
the
handset
cord
into
the
handset.
2
need an RJ11 type modular jack, which
is the
92100
Boulogne Billancourt
09-43
1
4.most
Plugcommon
the telephone
cordjack
intoand
a modular
wall phone jack.
type ofline
phone
might
look
France
Printed
in
China
like the one pictured here. If you don't have a modular jack, call your local phone companywww.thomson-asia.com.hk
to find
1.outSlide
volume
(on the base) to the desired volume.
ALL
OUNT
NSTALLATION
howthe
to RINGER
get
onename
installed.
Alcatel logo
and
Alcatel
are trademarks of Alcatel and used under license
2. Slide
the PULSE/TONE
switch
to TONE ifon
youause Touch-Tone
Your
telephone
may also
be mounted
by Thomson
Telecom. THE HONE
NSTALLING
Service;
set itincluded).
to PULSE if you have rotary service.
wall
plate (not
telephone
should
be
placed
on a level surface such as a
3.Your
Plug
thetelephone
handset
cord
into
the
handset.
1.
Plug
the
line
cord
into
2
orthe
table
top,phone
or you
can
it on a wall,
desktop/wall
aPlug
modular
wall
4.desk
telephone
linejack.
cordmount
into a modular
wallAphone
jack.
pedestal is
builton
into
the base of the phone.
2.mounting
Slip the mounting
holes
the
1
base over the wall plate
posts and
3
ALL OUNT 4NSTALLATION
firmly slide the unit down into place.
Your telephone may also be mounted on a
wallRAPPING
plate (not included).
THE ELEPHONE INE ORD
1. Plug the telephone line cord into
2
In desktop mode, you may want to wrap the excess
a modular
phone
jack.the grooves provided on the
telephone
linewall
cord
through
2
2. Slip the
mounting
bottom
of the
base. holes on the
1
1
base over the wall plate posts and
firmly slide the unit down into place.
B
M
W
I
Designer phone
User's Guide
INTRODUCTION
Your Telephone is designed to give you flexibility in use, and high
Designer
phone
quality
performance.
To get the most from your new telephone, we
suggest
that you
take a few minutes right now to read through this
User's
Guide
instruction manual.
If you have any questions or problems, consult the Troubleshooting
Tips NTRODUCTION
for the solution.
I
Your Telephone
is designed to give you flexibility in use, and high
PARTS
CHECKLIST
quality performance. To get the most from your new telephone, we
Your
package
contain
following
suggest
thatshould
you take
a fewthe
minutes
rightitems:
now to read through this
instruction manual.
If you have any questions or problems, consult the Troubleshooting
Tips for the solution.
PARTS CHECKLIST
ModelYour
Temporis
23-SA should contain the following items:
package
10000002 Rev.1 (E)
10-09
Printed in China
Designer phone
User's Guide
Product imported by :
Commsolve (Pty) Ltd
info@stingray.co.za
Tel : + 27 21 442 1540
Handset
Fax: + 27 21 448
8033
INTRODUCTION
ATLINKS
22 quai Gallieni
92150 Suresnes
France
www.atlinks.com
Base
Your Telephone is designed to give you flexibility in use, and high
quality
performance.
To
get
the
most
from
your
we
Alcatel logo and Alcatel name are trademarks of Alcatel
and
usednew
undertelephone,
license by ATLINKS.
Model
Temporis
23-RS
suggest
that you
take a few minutes rightThomson
now to Telecom
read through this
46 quai Alphonse le Gallo
00030362
(Rev.1
R/E)
instruction
manual.
W
W
Y
J
B
M
M
I
I
R
P
T
L
C
1. RAPPING
Slide the RINGER
volume
(on the base)L
toINE
the desired
W
THE
TELEPHONE
CORDvolume.
Slide the
PULSE/TONE
youexcess
use Touch-Tone
In2.desktop
mode,
you mayswitch
want to
to TONE
wrap ifthe
telephone
line
the grooves
provided
Service;
setcord
it to through
PULSE if you
have rotary
service.on the
bottom of the base.
3. Plug the handset cord into the handset.
4. Plug the telephone line cord into a modular wall phone jack.
TELEPHONE BASICS
WALL MOUNT INSTALLATION
RYour
ECEIVING
A Palso
HONE
CALLon a
telephone may
be mounted
1.wall
When
the(not
phone
rings, simply lift the handset and begin your
plate
included).
1.conversation.
Plug the telephone line cord into
2
a modular wall phone
jack.
ASICS
2.2.ELEPHONE
To
end
conversation,
Slip
theofmounting
holesreturn
on thethe handset to1 cradle.
base over the
wall plate posts and
INGER
OLUME
ECEIVING
AunitHONE
CALL
firmly slide the
down into
place.
You
may
control
the
ringer
volume
levelhandset
with theswitch
located
1. When the phone rings,
simply
lift the
and begin
your
on conversation.
theRAPPING
bottom of the
base.
THE
ELEPHONE
INE
ORD
= ringer tone will be loud
desktop
mode,
you mayreturn
want to wrap
thetoexcess
2.In=To
end oftone
conversation,
handset
cradle.
ringer
will be
middlethe the
telephone
line cord
through
grooves provided on the
T
R
W
B
V P
T
L
C
P
c
c
lo
fl
6
T
a
1
2
T
If
w
th
g
c
1
2
T
P
N
W
P
F
in
C
o
C
T
g
2. Slip the mounting holes on the
base over the wall plate posts and
firmly slide the unit down into place.
1
WRAPPING THE TELEPHONE LINE CORD
In desktop mode, you may want to wrap the excess
telephone line cord through the grooves provided on the
bottom of the base.
1. Pick up the handset to get a dial tone.
one line.
2. Press redial.
Feedback when dialing This is normal, Power fluctuates with
in PULSE
mode
outpulsing.
EMPORARY
ONEphone
EATURE
T
T
F
If you
Pulse
Can't
behave
heard
by(rotary) service,
Makeand
sure phone cord is securely
wantparty
to access customer calling services
other
plugged
that require touch-tone dialing,
suchin.
as
sureyou
other phones aren't off the
getting information from a Make
local bank,
hook at the same time you're using the
can use this feature.
phone. It is normal for the volume to drop
1. Press the TONE button ( * ) after you
when additional phones are used at the
have connected to the service in order
to enable touch-tone same
dialing.time.
you hang
the phone autoC2.AREWhenAND
Mup,AINTENANCE
T
TELEPHONE BASICS
RECEIVING A PHONE CALL
P
1. When the phone rings, simply lift the handset and begin your
conversation.
2. To end of conversation, return the handset to cradle.
RINGER VOLUME
You may control the ringer volume level with theswitch located
on the bottom of the base.
= ringer tone will be loud
= ringer tone will be middle
= ringer tone will be low.
PLACING A PHONE CALL
1. Lift the handset and wait for a dial tone.
2. Dial the telephone number you wish to call.
FLASH BUTTON
Press the FLASH button instead of using the hook switch to activate
Flash
customer calling services such as call waiting or
button
call transfer, which are provided by your
local phone company. Select the appropriate
flash timing (on the bottom of the base,
600ms,300ms,100ms).
Redial
EDIAL UTTON
button
This unit redials up to 32 digits. To
automatically redial the last number you called:
1. Pick up the handset to get a dial tone.
2. Press redial.
R
B
TEMPORARY TONE FEATURE
If you have Pulse (rotary) service, and
want to access customer calling services
that require touch-tone dialing, such as
getting information from a local bank, you
can use this feature.
1.
2.
Press the TONE button ( * ) after you
have connected to the service in order
to enable touch-tone dialing.
When you hang up, the phone auto-
TONE button
TONE button
matically returns to Pulse dialing mode.
To keep your phone working and looking good, follow these
guidelines:
ROUBLESHOOTING
IPS and devices that
Avoid
putting near heating appliances
generate
electrical noise(for
example, motors and fluoresROBLEM
OLUTION
cent lamps).
No
dial
tone
hook
switch to make sure it pops up.
DO NOT expose to direct Check
sunlight
or moisture.
Won't dial out
TONE/PULSE
set to correct
Avoid dropping and otherMake
roughsure
treatment
of theisunit.
position.
Never use a strong cleaning
agent or abrasive powder
because this will damage the finish.
Youinmight
haveneed
too many
Phone
ring package
Retaindoesn't
the original
case you
to shipphones
it at a on
one line.
later date.
Feedback
when
dialing must
Thisbeis disposed
normal, Power
fluctuates with
Used
equipment
of in compliance
in PULSE
mode
phone outpulsing.
with
current environmental
protection regulations.
You
should
to your
reseller
dispose
of it
Can't be
heard
by return itMake
sure
phoneorcord
is securely
in an approved recycling
centre.
other party
plugged
in.
Make
sureCERTIFICATION
other phones aren't off the
INFORMATION ON
PRODUCT
hookTemporis
at the 23
same time you're using the
Model ALCATEL
phone. It is normal
the volume
Certificate of conformity № РОСС FR.МЛ05.H01000
valid till for
September
6, 2012 to drop
are10,
used
Declaration of conformity № Д-Т-0981when additional
validphones
till September
2014at the
same time. 5 years
Life cycle
CARE
S
T
AND MAINTENANCE
To keep your phone working and looking good, follow these
guidelines:
Avoid putting near heating appliances and devices that
generate electrical noise (for example, motors and fluorescent lamps).
DO NOT expose to direct sunlight or moisture.
Avoid dropping and other rough treatment of the unit.
Never use a strong cleaning agent or abrasive powder
because this will damage the finish.
Retain the original package in case you need to ship it at a
later date.
Used equipment must be disposed of in compliance
with current environmental protection regulations.
You should return it to your reseller or dispose of it
in an approved recycling centre.