ALK Technologies 11 Laptop User Manual

User Guide
Welcome
Thank you for choosing CoPilot Live 11.
This guide will tell you everything you need to know
about using CoPilot Live 11.
This PDF is interactive to make it easier for you to navigate through it to
find the information you are looking for. Here are some tips for using it:
• Click on the titles in the contents page to be taken straight to the
section of your choice.
• Click
at the bottom of each page to go back to the contents page.
• Click on red text and page numbers to be taken to the page referenced.
You can also use the Pages tab in Adobe Acrobat Reader to help you navigate
the document.
2
User Guide
Welcome
Contents
01 Getting Started
Checklist ...............................................................................................5
Installing CoPilot Live 11 ........................................................................6
Activating CoPilot ..................................................................................6
Select Language and Voice ....................................................................7
Select a Distance Measurement .............................................................8
Tips and Tricks ......................................................................................8
GPS Setup ............................................................................................9
Setting Up a Built-in or USB GPS Receiver ...............................................9
Setting Up a Bluetooth GPS Receiver ....................................................10
GPS Tips .............................................................................................10
02 Using CoPilot Live
Selecting a Destination ........................................................................11
Pick a Stop From the Map ....................................................................11
Nearby Points of Interest ......................................................................12
Adjusting the POI Settings ....................................................................12
Advanced POI Search ..........................................................................13
To Choose a Recent Destination ...........................................................14
To Choose a Contact’s Address As a Destination ....................................14
To Choose an Intersection For Your destination ......................................14
Selecting a Destination Using Lat and Long ...........................................15
Choosing a Saved Trip .........................................................................15
Saving Your Current Location................................................................15
Other Ways to Select a Destination .......................................................15
Entering Multiple Destinations ..............................................................16
Trip Options.........................................................................................16
Change the Stop Order ........................................................................16
Optimize Stops ....................................................................................16
Setting Waypoints ................................................................................17
3
User Guide
Contents
Saving Destinations as Favorites...........................................................17
Preview Your Route ..............................................................................17
Saving a Planned Trip ..........................................................................18
Loading a Saved Trip ...........................................................................18
Deleting a Planned Trip ........................................................................18
Generating a State Mileage Report .......................................................18
Route Settings.....................................................................................19
Saving a Routing Profile .......................................................................19
Loading a Routing Profile .....................................................................19
Road Preferences ................................................................................19
03 Driving With CoPilot Live
Begin Driving.......................................................................................20
Trip Editing ..........................................................................................20
Traffic Service .....................................................................................20
Guidance ............................................................................................20
Driving Views ......................................................................................21
On-screen Information .........................................................................21
Setting Display Mode ...........................................................................22
Driver Safety .......................................................................................22
3D ......................................................................................................22
2D Where Am I? ..................................................................................22
2D Next Turn .......................................................................................23
2D Destination ....................................................................................23
Itinerary ..............................................................................................23
Night Mode .........................................................................................23
04 Personalize
Saving a Destination as Home ..............................................................24
Saving a Destination as Work ...............................................................24
Contents
Changing Your Work or Home ...............................................................24
Save Your Favorite Destinations ............................................................25
Edit or Delete Favorites ........................................................................25
Night Map ...........................................................................................26
Customizing the Guidance Screen ........................................................26
Personalizing the Voice Instructions ......................................................27
Setting Map Styles...............................................................................27
Applying Themes .................................................................................27
Customizing Routing Options ................................................................27
05 Advanced
Detours...............................................................................................28
Ending a Detour ..................................................................................28
Recalculate the Whole Trip ...................................................................28
CoPilot Live Traffic Service ...................................................................29
Setting Up CoPilot Live Traffic ...............................................................29
Avoiding Traffic ....................................................................................29
Additional Traffic Settings .....................................................................30
Searching for Traffic Incidents ..............................................................30
Using the Traffic Incidents List ..............................................................30
Setting Map Preferences ......................................................................31
Setting Map Styles...............................................................................31
Checking the GPS Status .....................................................................32
Track Playback ....................................................................................32
Adjusting the Volume ...........................................................................32
Adjusting the Guidance Settings ...........................................................33
Adjusting Your Safety View ...................................................................33
Setting the Language and Speech ........................................................33
Playing a Demo ...................................................................................34
Keyboard ............................................................................................34
About CoPilot ......................................................................................34
4
User Guide
Contents
Licensing ............................................................................................35
Transferring Your CoPilot Live License ...................................................35
CoPilot Live .........................................................................................36
Creating a CoPilot Live Web Account.....................................................37
Connecting To the Live Server ..............................................................37
Entering Your Live Account Information Into CoPilot ................................37
Invitations and Messages .....................................................................38
Live Connection Status ........................................................................38
Adjusting CoPilot Live Communication Settings .....................................38
06 Support
CoPilot Customer Support Helpline........................................................39
Online Help .........................................................................................39
07 EULA
01
Getting started
Checklist
First check the contents of your box with the list below.
CoPilot Live DVD
Documentation
USB GPS Receiver*
Software & Street-level Maps
Bluetooth GPS Receiver**
Car Charger
* Optional accessory. Only included in certain CoPilot Live navigation kits that include a USB GPS receiver.
** Optional accessory. Only included in certain CoPilot Live navigation kits that include a Bluetooth GPS receiver.
5
User Guide
01 Getting started
01
Getting started
Installing CoPilot Live 11
Note: If you are updating from an older version of CoPilot, you may want
to uninstall the previous version first. This is not required.
1 Turn on your laptop and insert the supplied CoPilot Live DVD into your DVD
drive. The install will start automatically within a few seconds.
Note: Alternatively, you can select Start > My Computer > DVD Drive.
2 Choose a language (for example: “English (United States)” and click OK.
3 Follow the Installation Wizard instructions and select Next.
4 Enter your product key in the boxes provided. Your product key can be
found on the back of the Quick Start Guide.
5 Follow the instructions, click Next to go from one screen to the next in the
Installation Wizard.
Activating CoPilot Live
After CoPilot Live is installed, a shortcut will be available on your desktop.
The first time you open CoPilot Live, you will be prompted to activate the
license.
Press Next to activate now or Cancel if you prefer to
activate the license later. If you press Cancel you will
still be able to use your CoPilot Live software under an
evaluation license for 3 days.
You can activate CoPilot Live automatically using your
laptop’s internet connection. Or, you can activate your
license on the CoPilot Live activation website at http://
activate.alk.com.
Automatic Activation
For automatic activation (recommended):
1 Select Internet and then select Next.
CoPilot Live 11 will now be installed. This may take a few minutes, please be
patient.
6
User Guide
01 Getting started
2 Enter your email address when requested
and select Next.
01
Getting started
Manual Activation Through the CoPilot Activation Website
Select Language and Voice
1 Select No Internet from the Activate CoPilot
screen. Press Next.
in the Language and Speech screen you can choose
which language you would like CoPilot Live to use for
on-screen text and voice guidance.
2 The next screen will show your product key and
license number.
3 Now, visit the CoPilot activation website at http://
activate.alk.com and enter your product key,
license number and email address as requested.
Press Submit. Your activation code will be
displayed on-screen and will be sent to you
by email.
4 On your laptop, press Next to continue to the next
screen. Enter your activation code and press Next.
After activation
When activation is completed you will see the
message Activation successful.
• Press Next to continue using CoPilot.
7
User Guide
01 Getting started
• Use the and arrows to choose your
preferred options.
• Click Test to hear a sample of the voice you
have chosen.
When you are happy with your selections click Next.
Note: You can change these settings at any time,
Menu > Settings >
> Language & Speech.
01
Getting started
Select a Distance Measurement
Tips and Tricks
Choose between Miles and Kilometers for the distance
units used in maps and instructions.
CoPilot Live has loads of great features, to help you get
to know and understand them we have included Tips
and Tricks at start up.
Note: You can change these settings at any time,
Menu > Settings > Map.
Note: When you have selected your distance setting,
you will be presented with a legal notice. Please read
this carefully, and then click Accept.
To turn off the Tips and Tricks uncheck the ‘Show Tips
and Tricks’ box. To see more use and . To close
the window click on the cross (
).
To view Tips and Tricks at any time:
• Menu >
8
User Guide
01 Getting started
> Tips & Tutorials > Tips & Tricks.
01
Getting started
GPS Setup
Setting Up a Built-in or USB GPS Receiver
Your laptop may have a built-in GPS receiver. If it does not,
you will need to set up a connection to a Bluetooth or a USB
GPS receiver.
If you selected Built-In or USB you will need to choose
between Automatic and Manual. We recommend
Automatic setup.
Configuring GPS
Whether you have a built-in or an external GPS
receiver, you will need to set up your GPS receiver in
CoPilot before you can begin navigating.
• Click Menu > Settings > GPS > Setup GPS.
With Automatic selected, click Finish. CoPilot will find
and connect to the GPS receiver in your laptop.
To set up Manually, select Manual, you will need to
select the COM Port that the GPS is connected to
and the BAUD rate for the laptop. Please consult
your laptop manufacturer for this information.
On the Setup GPS Receiver screen choose between:
When you have entered the information click Finish
to continue. Once setup has been completed select
Finish to complete the process.
• Built-In to use the GPS receiver built into your laptop.
Note: If you get the message GPS Setup failed, the
• Bluetooth to set up a connection between your laptop and the Bluetooth
GPS receiver.
COM Port and/or BAUD information were incorrect.
Please try again.
• USB to use a USB GPS receiver connected to your laptop’s USB port.
You are now ready for your first trip with CoPilot!
Important: Make sure you set the correct date and time on your laptop
to get the best GPS functionality.
9
User Guide
01 Getting started
See page 10 for GPS Signal tips.
01
Getting started
Setting Up a Bluetooth GPS Receiver
1 Switch on your Bluetooth GPS receiver.
2 Select Bluetooth in the Setup GPS Receiver
screen then click Next.
CoPilot Live will begin searching for Bluetooth devices
in your immediate vicinity. Once the search is
complete, all nearby GPS devices will be displayed.
3 Select your GPS receiver from the list. (If you are
using the GPS receiver supplied with your CoPilot
software it will appear in the list with a name
similar to “BTGPS”.)
4 Click Next. To complete the setup, click Finish.
You are now ready for your first trip with CoPilot!
Note: If you chose Manual to set up your
Bluetooth receiver, you may be prompted to
enter a pin code. Use “0183” or “0000” to
enter.
10
User Guide
01 Getting started
Tips: GPS Signal
• The first time you use the GPS receiver it may take a
moment to determine your position.
• GPS signal will be limited inside buildings, tunnels or parking lots. To
work effectively the GPS receiver needs to have a clear line of sight to
the sky.
• If you are using a USB receiver, be sure it is firmly plugged into your
laptop and that your computer recognizes the device.
02
Using CoPilot Live
Safety Information
Do not attempt to change the settings, or set
a destination on CoPilot while you are driving.
Ask a passenger to make changes, or pull
over safely.
Do not leave your laptop PC or GPS loose in
the car while driving. Ensure they are correctly
seated in a car mount.
• Enter the house number and select Finish,
or just select Finish to skip this step.
A preview map of your route will then appear.
Select Drive to begin navigating your route.
Selecting a Destination
Quickly Pick a Stop From the Map
CoPilot uses GPS satellites to calculate your exact position
so you don’t have to enter your starting point. Simply enter
your destination and CoPilot will take you there, providing
detailed turn instructions all the way.
You can also select a destination from the map.
• Click Menu > Destination > Address.
• Enter the city/town name of your destination.
• Select the correct city or area when it
appears in the list below. Scroll down to see
more address options matching what you
have typed.
11
• Enter the first three or four letters of the
street name. As you enter the street name
CoPilot will list potential matches. Select the
correct street name when it appears in the
list below.
User Guide
02 Using CoPilot Live
• Select Menu > Destination >
on Map.
> Pick
A map of the area around your current location
will be displayed. Touch and drag the screen to
move around the map and click your desired
destination when you find it.
02
Using CoPilot Live
Nearby Points of Interest
Adjusting the POI Settings
If you are running low on diesel fuel or need to rest at a
truck stop, CoPilot Live has over 6 million pre-loaded
Points-of-Interest (POI) to search.
You can choose when to have POIs shown on-screen
and the distance at which you are notified by adjusting
the POI settings.
• Select Menu > Nearby POI.
• Click Menu > Settings > POIs.
• From the list, select a category. For example,
Gas Station.
• Enable the POIs by checking the box. Disable
by unchecking.
After a few moments a list of nearby gas stations will
appear, in order of distance from your current location.
• Choose to Show POIs Always, Never or When
Stopped from the picklist.
• Make a selection and click OK. A preview map
of the route to your selected POI will appear.
• In the Report POIs this far ahead field, select a distance between
0.2 and 25 miles.
• Click Drive to begin navigating the route.
• Select whether to show POIs that are on your route or nearby it. Select
On Route or Near Route.
Tip: POI In the City
You can search for a POI within a city, near
your current location or along your route
by pressing Menu > Destination >
Points of Interest.
You can search for a particular POI within
a category by name, see page 13.
12
User Guide
02 Using CoPilot Live
• Under Select POIs to be reported, select specific POI categories to
display by checking the boxes.
• Click OK to apply the settings and return to the Settings menu.
02
Using CoPilot Live
Advanced POI Search
If you want to visit a specific POI without entering the
address, you can search the POI database and set it
as a destination.
• Select Menu > Destination > Points of
Interest.
• Choose to select a category or search all.
If you check the Pick Category box, click
the correct category. Click Next.
• If you know the name of the place you
want to visit, enter it here.
• Select a location option: choose from Near current location, Along my
route or In a City to search for a related POI. Press Next.
• For Near current location and Along my route, the POI list will be
automatically generated. If you selected In a City, enter the name
of the city or town nearest the POI you are searching for.
13
User Guide
02 Using CoPilot Live
CoPilot will then search the millions of POIs in its database. When complete,
a list of the nearest matches will appear on-screen.
• Select the correct POI from the list.
• Press Details to view the POI on the map. CoPilot will also display the
phone number for the POI if available.
• For CoPilot to create a route from your current location to your selected POI,
select OK.
02
Using CoPilot Live
To Choose a Recent Destination
To Choose an Intersection For Your Destination
• Select Menu > Destination > Recent.
• Select Menu > Destination >
Recent provides quick and easy access to
the last 50 destinations that you entered.
Enter the City or Town and click next, you will be asked to enter the first
road and then the second. CoPilot will calculate your route to the point
where they meet.
Note: Your recent list will store the last 50
addresses you have entered. When the list is
full each new address will replace an older
inactive address.
To delete the recent stops list:
• Select Menu > Destination > Recent > Clear All.
To Choose a Contact’s Address As a Destination
You can select an address from any Contacts that you have
stored in your laptop.
To select a contact:
• Click Menu > Destination > Contact.
Enter your contact name to automatically recall the address saved
in your laptop, or select from the list of contacts.
14
User Guide
02 Using CoPilot Live
> Intersection.
02
Using CoPilot Live
Selecting a Destination Using Lat and Long
Saving Your Current Location
If you know the latitude and longitude of your destination
you can enter them directly.
If you are outside and have a GPS fix, you can save your
current location.
• Click Menu > Destination >
• Click Menu >
> Coordinates.
• Choose to set the latitude and longitude
in Degrees Minutes Seconds, Decimal
Degrees or Decimal Minutes.
• Enter a latitude and longitude in the
appropriate format depending on which
one you selected.
CoPilot will take a few moments to find the
point. When it is located a map will appear
with the location pinpointed by a red arrow.
• Select Drive to begin navigating your route.
Choosing a Saved Trip
If you already have a saved trip that you want to use, you can access it quickly.
• Click Menu > Destination > Open Saved Trip. For details on saving a
planned trip, see page 18.
15
User Guide
02 Using CoPilot Live
> Save Current Location.
• Enter a name for the destination and click Save.
• The location will be saved in your Favorites list, where it can be accessed as
a destination in the future.
Other Ways to Select a Destination
You can save locations as Home and Work for one-click address entry,
see page 24. In addition, CoPilot lets you save your Favorite destinations
so you can access them quickly, see page 25.
02
Using CoPilot Live
Entering Multiple Destinations
Change the Stop Order
CoPilot allows you to plan a trip with multiple destinations.
• Click Menu > Plan or Edit Trip.
When you have entered all your required stops you can
change the order they appear in.
• Click
• Highlight the address you wish to move.
to add a destination.
• To delete a stop, select it and click
Click the Move Up, Move Down, Move to Start or
Move to End button.
.
• Add the first address; click the Add
Destination button again to add a second,
third, etc. address. See page 11 for
address entry details.
The selected stop will move to its new position
in the trip list.
Trip Options
In the trip planning window click the Options button.
• To see a fuel cost estimate when the trip
calculated, type in the vehicle Miles per Gallon
and cost per gallon.
16
is
Optimize Stops
CoPilot has an Optimize function which will automatically rearrange the stops on
a trip to create the most efficient route.
• To have break hours included in the trip ETA,
select a time interval and break time.
If your planned trip has more than three (3) stops, click Optimize. CoPilot will
take a few seconds to reorder your stops for the most efficient trip.
• When Optimize Final Destination is checked,
the position of the last stop on the stop list can
be changed when the trip is optimized (see below).
Note: Your start point and final destination will not be altered. If you want the
User Guide
02 Using CoPilot Live
final destination to be included in the optimization, click Options and check
Optimize Final Destination.
02
Using CoPilot Live
Setting Waypoints
Saving Destinations As Favorites
CoPilot Live can route you through a designated point
without considering it as a stop. By setting Waypoints
you can adjust CoPilot’s route to calculate a detour via
the waypoint.
You can save addresses listed on the trip list as
Favorite destinations so you can access them quickly.
• Select Menu > Plan or Edit Trip. Enter the
addresses or places in the same way detailed in
Selecting a Destination on page 11.
• Addresses will normally appear on the trip list as
stops with a flag icon next to them. Highlight the
address you wish to change to a Waypoint.
• Click on the address you wish to save as a favorite.
• Click the Add to Favorites button. Now you will be able to enter this
address as a destination quickly by selecting Menu > Destination >
Favorites and selecting it from the Favorites list.
Tip: Do More With Favorites
For more information on Favorites see page 25.
• Click the Set as Waypoint button.
The address or place will now be listed as a Waypoint,
with an arrow icon in front of it to indicate that it is
a Waypoint.
Preview Your Route
When all your stops have been entered, press Calculate.
Tip: Make a Waypoint a Stop
To change a Waypoint back to a stop, highlight the address then click
the Set as Stop button.
17
User Guide
02 Using CoPilot Live
Your planned trip will appear on the map. From this window you can run a State
Mileage Report, do a Preview run of the trip, edit the stop list, or change the
trip options and re-calculate.
02
Using CoPilot Live
Saving a Planned Trip
Deleting a Planned Trip
Before you calculate a trip, you may want to save it for
future use.
• Click New Trip.
• In the trip planning window click Save Trip.
You will be asked to confirm this selection. Click Yes at the prompt. Now you
can enter a new trip, or click
to return to the main window.
• Enter a name for the trip you are saving.
• Click Save and the trip will be saved.
Generating a State Mileage Report
After calculating a route, you can generate a State Mileage Report. Click the
State Mileage Report button under the mileage and time estimate.
Loading a Saved Trip
• Click Menu > Plan or Edit Trip.
The last trip you planned will automatically load. If
you wish to load an older trip, click Load Trip and
select the trip you wish to load from the list. Click
Open. Or, select Menu > Destination > Open
Saved Trip.
18
User Guide
02 Using CoPilot Live
This report shows a state-by-state breakdown of total, toll, free, and ferry
mileage on your trip. It will open in the internet browser on your laptop.
02
Using CoPilot Live
Route Settings
CoPilot Live offers a number of routing options that
change the way your route is calculated.
• Click Save Routing Profile.
• Select Menu > Settings > Routing. You will
need to scroll down to see some of the options.
• Enter a name at the prompt and click OK.
• Vehicle Type: Select Automobile or RV.
Loading a Routing Profile
• RV Height Restrictions: CoPilot uses a 12’6” or
13’ height restriction for RV routing.
• Click Load Routing Profile.
• Routing Type: Select Quickest, Shortest, Avoid
Expressways or Scenic.
• Toll Roads: Select whether you want CoPilot to
Use toll roads, Always Avoid them, or to Avoid If Possible (where
practical and reasonable).
• Check Avoid Ferries to avoid ferry miles on your route.
• Choose Avoid Propane-Restricted Tunnels if necessary (e.g. RV trips).
• Check International Borders Open to allow your route to cross
international borders. When this option is not checked, CoPilot won’t cross
international borders even when it would be more practical to do so.
Saving a Routing Profile
19
Different combinations of route settings can be saved
as routing profiles for use at a later time.
User Guide
02 Using CoPilot Live
• Select a profile from the list and click OK twice to
apply the profile and close the Routing window.
Road Preferences
(Available only after a Routing Profile is saved.) Scroll
down and click View/Edit Road Preferences.
• For each road type: Choose whether you want
CoPilot to Strongly Avoid, Avoid, be Neutral,
Favor or Strongly Favor when calculating a route.
• Speed: Select an appropriate speed for each road.
Note: Changing the default route and road preferences
in CoPilot will affect the route calculated and ETA shown.
03
Driving With CoPilot Live
Begin Driving
Traffic Service*
Select Drive to begin navigating your route.
CoPilot can automatically display any traffic incidents
that affect your route and can recommend an alternate
route if required. For more information see page 29.
Tip: Starting Points
If you are planning a trip in advance and
are not at the start point of your journey
CoPilot will ask you to select your starting
location. You can choose to navigate to
the starting point, or to navigate directly to
the destination from your current location.
*CoPilot Live Traffic is available as an
optional service.
Guidance
CoPilot will guide you to your destination with clear
on-screen and spoken instructions.
Whenever you are approaching your next turn,
CoPilot will speak to you to alert you to the
upcoming direction change.
Trip Editing
Once you have pressed Drive, you can change the trip entered by selecting:
Menu > Plan or Edit Trip. See Entering Multiple Destinations, page 16.
To simply delete a destination you have entered, click Menu >
> Clear
Destination.
20
User Guide
03 Driving With CoPilot Live
03
Driving With CoPilot Live
Driving Views
On-Screen Information
You can choose from six different screen display options.
To access, click Menu > Driving Views. For more details
on each view and how to change views, see Setting Display
Mode on page 22-23.
By default your current location is displayed at the bottom of the map. You can
choose what useful information is displayed at the base of your screen when you
are driving, see Customizing the Guidance Screen on page 26.
In the default mode, your screen will look like the one below.
ETA & distance to
final destination
Yellow next
turn arrow
Zoom in
Zoom out
Next turn
direction
Route ahead
highlighted
Distance to
next turn
Current position
Next approaching turn
Tip: Take a Closer Look
Use the
and
of the map view.
21
User Guide
in 2D or 3D driving views to zoom in or out
03 Driving With CoPilot Live
Volume control
Information options
Tip: What Are These?
Live Online indicator
(see page 36)
GPS Status:
Green = Best fix
Yellow = Fair
Red = No fix
Traffic Service connected
(when green)
03
Driving With CoPilot Live
Setting Display Mode
You can choose from several different screen display
options. To access, click Menu > Driving Views.
Or, click the Driving Views Shortcut button to quickly
access one of four views:
Shows your current position, next turn and surrounding
roads using a 3-dimensional perspective.
Driver Safety
2D Where Am I?
While you are driving we recommend you choose Driver Safety, which displays a
simple turn instruction arrow with concise next turn instructions in large type. In
driver safety mode, a map is only displayed as you approach a turn or are
travelling below 10mph.
Displays your current location, next turn and
surrounding roads on a 2D map.
Tip: Adjusting Your Safety View
You can alter the settings of the driver safety view. See Adjusting Your
Safety View on page 33.
22
3D
User Guide
03 Driving With CoPilot Live
03
Driving With CoPilot Live
2D Next Turn
Itinerary
Displays your current location and auto zooms into
the next turn on a 2D map.
This view shows each direction and turn in a text list,
including distances.
You can use the Itinerary to check your route
before you travel.
23
2D Destination
Night Mode
This view shows the route from your current position
to your destination.
Displays map with a dark background
that reduces glare for easier night-time
viewing.
User Guide
03 Driving With CoPilot Live
04
Personalize
Enter and save personal destinations, change the map style and color theme,
adjust your routing options, and select the voice that guides you to your
destination. With CoPilot Live 11 you can personalize your laptop to behave
exactly the way you want it to.
Saving a Destination As Work
Save your work address so you don’t have to enter
it every time you wish to be directed there.
• Click Menu > Destination > Work.
Saving a Destination As Home
Save your home address so you don’t have to enter
it every time you wish to be directed home.
• Enter your home city/state name, street name and (optionally) building
number, then click Finish.
• The next time you are entering a destination and select Work, your work
address will enter automatically.
• Click Menu > Destination > Home.
• Enter your home city/state name,
street name and (optionally) house
number, then click Finish.
• The next time you are entering a
destination and select Home, your
home address will enter automatically.
24
User Guide
04 Personalize
Changing Your Work or Home
The home and work addresses you entered are placed in your Favorites list.
They can be edited or deleted at any time, see page 25.
04
Personalize
Save Your Favorite Destinations
Edit or Delete Favorites
You can save other addresses to your Favorites list,
so you can access them quickly.
• Click Menu > Destination > Favorites.
To edit or delete a location in your Favorites list,
click Manage, select a favorite and choose to
Edit, Delete or Delete All.
• Click Add New and CoPilot will return to
the Destination menu.
• Edit will open an enter address window so
you can change the location.
• Choose to add the favorite by inputting
the address/postcode (click Address)
or by locating it on a map (Pick on Map)
or any of the other ways to enter a
destination.
• Delete will erase the currently highlighted
location.
When you’ve successfully added the address
or location, it will appear in your Favorites list.
25
User Guide
04 Personalize
• Delete all will erase all the locations in your favorites list, including your
Home and Work addresses.
Note: You will be asked to confirm you wish to delete an item. If you select Yes
the address/es will be lost.
04
Personalize
Night Map
Customizing the Guidance Screen
Night Map can be selected in any of the display screen
modes. It dims the screen display to reduce glare and
eye strain when driving at night.
You can choose what information you want
to be displayed below the map when you
are driving.
CoPilot will automatically switch to night mode based on the time and your
location, or you can do it manually from the Driving Views menu.
• Click on the bottom right of
the screen, then choose from:
Click Menu > Driving Views >
> Night Map.
To switch off Night Mode, click Menu > Driving Views >
• Destination
> Day Map.
You can also alter the day and night mode settings from the Map Styles window.
See Setting Map Styles on page 27 for details.
• Current Road
• Next Crossroad
• Next Major Road
• Nearest Town
• Speed
• Altitude & Heading
• Latitude & Longitude.
26
User Guide
04 Personalize
04
Personalize
Personalizing the Voice Instructions
Applying Themes
You can alter the voice with which the guidance
instructions are spoken.
You can change the color theme of your CoPilot.
> Themes.
Menu > Settings >
• Click Menu > Settings >
and Speech.
Select a theme using the up and down arrows next
to the Select a Theme field. Press Apply Theme to
apply the chosen theme.
> Language
• Select a language from the Choose a Language
picklist.
• Select a voice from the Choose a Voice picklist.
Select Test to hear a sample of the chosen voice.
For text-to-speech directions, select Samantha.
Customizing Routing Options
Once a destination has been entered the Route screen will appear, showing you
a preview map of the route. Select Options to change the route type or routing
profile for the trip.
Setting Map Styles
• Click Menu > Settings >
> Map Styles.
You can select from a range of industry-standard map
presentation styles and color themes using the Map
Style list. A preview is shown each time you select
one. Once you are happy with your selection click OK.
Also see Adjusting Your Safety View on page 33.
27
User Guide
04 Personalize
For more details see Preview Your
Route on page 17, and Route Settings
on page 19.
05
Advanced
Detours
You can program CoPilot to make a detour around one or
more selected roads on the calculated route, or to
calculate a whole new alternate route.
Tip: Avoiding Multiple Roads
You can specify multiple roads to be avoided. Repeat as many times as
required. Press
to return to the driving screen when done.
• Select Menu > Detour.
• To route around a specific road,
select Avoid Roads.
An itinerary of your journey will appear.
Click on the road you would like to
avoid then select Avoid Road.
CoPilot will take a few moments to
calculate another route around the
selected road, then an updated map
display of the new route will be generated. The difference in mileage and time
that will result if the new route is accepted is displayed below the map.
28
Note: CoPilot will save all the roads you select to avoid and avoid them in
future route calculations. To clear the memory, select Menu > Detour > Clear
Avoided Roads.
Ending a Detour
If you are on a detour route and would like to return to the original trip, select
Menu > Detour > End Detour.
For example: “< 1 mi / +2 mins” means that the new route is about one
mile shorter but is estimated to take approximately two minutes longer to drive.
Recalculate the Whole Trip
• Click Accept, then press
to close the itinerary window and CoPilot will
begin guiding you along the new route.
If you are unhappy with the whole route CoPilot has planned for you, click Menu
> Detour > Alternate route.
• If you decide not to use the new route, select Decline. CoPilot will then
return to your original route. Press
to close the itinerary window.
CoPilot will compile a different route for you if a reasonable alternative exists.
A map of the proposed detour will be displayed. Select Accept to agree or
Decline to return to the previous route.
User Guide
05 Advanced
05
Advanced
CoPilot Live Traffic Service*
Avoiding Traffic
The optional CoPilot Live Traffic service provides information about real-time
traffic incidents on your route or in a specific location.
You can program CoPilot to make a detour from the
programmed route to avoid traffic.
Traffic information will be delivered to CoPilot Live using your mobile
internet connection. CoPilot Live will automatically display any traffic incidents
that affect your route and can calculate an alternative route if required.
• Select Menu > Detour.
You can also search for traffic incidents in other locations before you start
driving.
CoPilot will use GPRS information to find traffic
incidents and will automatically plan another route,
avoiding traffic congestion.
The availability of CoPilot Live Traffic varies by region and retailer.
For more information, please visit www.copilotgps.com.
Setting up CoPilot Live Traffic
Traffic information delivered via Mobile Internet
29
•
Select Menu > Traffic > Traffic (GPRS) Connect.
•
Once connected, CoPilot Live will check your route for traffic
automatically, downloading traffic information via your mobile Internet
connection.
User Guide
05 Advanced
• From the Detour options, select Avoid
All Traffic.
Along with a map, CoPilot will display the distance the
new route will add/subtract from your trip.
• Click Accept and CoPilot will begin directing you according to the new
route.
• If you decide not to use the new route, select Decline. CoPilot will then
return to your original route.
* CoPilot Live Traffic is available as an optional service. You must be connected
via the Mobile Internet as described here to receive traffic data.
05
Advanced
Additional Traffic Settings
To search for traffic incidents in a City:
To adjust the alert settings and define how CoPilot uses
GPRS traffic information:
• Select Menu > Traffic > Traffic in a City.
• Select Menu > Traffic > Settings.
Options are:
• Traffic Source: The CoPilot Live Traffic Service in
North America receives information via a GPRS
Wireless connection to the mobile Internet.
• Internet Connection: In the U.S., use Default to
automatically connect with your Internet Provider.
• Default Incident Action: Select Avoid to set
CoPilot to automatically detour around reported
incidents, select Ignore if you do not want to be
automatically detoured.
• Speak Incidents: Choose to have CoPilot
announce traffic incident alerts as they occur.
Searching For Traffic Incidents
To search for traffic incidents along your current route:
• Select Menu > Traffic > Traffic on Route.
30
User Guide
05 Advanced
Enter the city/town name of where you would
like to check for traffic destination.
To search for all traffic incidents:
• Select Menu > Traffic > View Traffic
Incidents.
To clear the traffic incidents list:
• Select Menu > Traffic > Clear Traffic Incidents.
Using the Traffic Incidents List
Once CoPilot has found traffic incidents, select one to
view detailed information relating to the incident.
Choose Ignore to continue on your planned route,
Avoid to calculate a new route that avoids the incident,
or Show Map to display the incident on a map.
In the Traffic Incidents list you can also select Map All
to see all listed incidents on the map, Avoid All to
calculate a new route that avoids all incidents, or Ignore
All to continue and ignore all incidents.
05
Advanced
Setting Map Preferences
Setting Map Styles
You can also set up what sort of maps CoPilot uses.
• Click Menu > Settings >
• Click Menu > Settings > Map.
Choose the default setting for the day or night mode
from the lists. The options are Automatic, Night
and Day.
The available settings are:
• Units: Choose to display Miles or KM on
your maps.
• Map Rotation: Choose Heading Up to always
be travelling upwards on the screen, or select
North Up to hold the map static as you travel
along your route.
• Stylus control: Select Box Zoom or Drag Map.
• General: Choose whether to display turn restrictions
by checking or unchecking the box. Check the box
marked ‘Display View Shortcuts’ to display a
driving view button which allows you to quickly change
between driving views.
• Click OK to apply the settings and return to the Settings menu.
31
User Guide
05 Advanced
> Map Styles.
If you select Automatic, CoPilot will automatically switch
to night mode when it starts to get dark, based on the
current time and location.
Select Styles: Choose to display Day or Night map
styles.
You can select from a range of industry standard map
presentation styles and color themes using the Map
Style list. A preview is shown each time you select one,
once you are happy with your selection click OK.
05
Advanced
Checking the GPS Status
Track Playback
• Click Menu > Settings > GPS > GPS Status.
CoPilot automatically tracks you as you drive and stores
each completed trip. You can play back any previously
completed trip.
The GPS Status window shows detailed information
regarding the GPS fix and signal strength which your
laptop uses for guidance. In this window you
can see your current latitude and longitude position,
the UTC time and date, your speed and your elevation
(feet above sea level).
32
• Click Menu > Settings > GPS >
Track Playback.
• Select the track to play from the list, click OK.
To control the speed of the playback, or to close it, see
instructions for playing a demo on page 34.
Note:
Adjusting the Volume
Your GPS signal will be limited when the receiver is inside buildings, tunnels
or garages. To work effectively the GPS receiver needs to have a clear line
of sight to the sky.
• Click Menu > Settings > Volume.
User Guide
05 Advanced
Use the + and - symbols to increase or decrease the
volume of the spoken instructions. To turn off the ‘click’
sound which occurs when you touch the screen, uncheck
the Button Sounds box.
05
Advanced
Adjusting the Guidance Settings
You can adjust the way CoPilot guides you.
• Click Menu > Settings > Guidance.
• Select the distances at which you want CoPilot
to speak to you when approaching a turn.
• When the Turn is Within: If you selected Yes above, choose the distance
before the turn at which you would like the map to be displayed. The
distance can be set between 0.3 miles and 1 mile.
• Map Type: If Display Map Near Turns is set to Yes, select whether
to use a 2D or 3D map when approaching turns.
• Select what information you wish to be
displayed on the customizable part of the
screen, see page 26.
Setting the Language and Speech
• Check the box to Display Route Arrow,
or uncheck to remove.
• Click Menu > Settings >
and Speech.
> Language
• Select a language from the Choose a Language
picklist.
Adjusting Your Safety View
• Click Menu > Settings > Driver Safety. From
here you can alter the settings of the Safety View
in the following ways:
• Display Map Near Turns: Decide whether to
show a 2D/3D zoomed map on the approach to
each turn or always show the Driver Safety screen.
Select Yes to display the map or No not to.
33
User Guide
05 Advanced
• Select a voice from the Choose a Voice picklist.
Select Test to hear a sample of the chosen voice.
For text-to-speech directions, select Samantha.
05
Advanced
Playing a Demo
Keyboard
CoPilot contains a demonstration trip to a pre-defined
destination. To view the demo:
• Menu > Settings >
• Menu >
> Play Demo.
Click the camera on the map to open a panel of buttons that lets you control the
demo or a track playback.
> Keyboard.
This setting affects CoPilot screens that include a
keyboard for text entry. Select a keyboard type from
the drop-down menu. The options are Alphabetical,
QWERTY, AZERTY.
• Speed up by clicking Faster or slow down by clicking Slower.
34
• Click
to go back to the beginning of the demo or track.
• Click
to go back to the most recent turn.
• Click
to pause.
• Click
to forward to the next upcoming turn.
• Click
to close the demo or track.
User Guide
05 Advanced
About CoPilot
• To access the version, data number and product key
of your CoPilot Live software, click Menu > Settings
>
>
> About CoPilot.
05
Advanced
Licensing
• Click Menu > Settings >
> Licensing.
The Licensing settings allow you to deactivate license
regions.
Transferring your CoPilot Live License
If you wish to use your CoPilot Live application and maps license on a different
laptop, select Deactivate and follow the on-screen instructions.
35
User Guide
05 Advanced
05
Advanced
CoPilot Live
CoPilot Live enables you to share your location with other people
in real time on the Internet. They can view your location live on
the map, send you instant messages and even new destinations.
CoPilot Live’s built-in location tracking can enable friends, family or colleagues
to see where you are and communicate with you in real time, whereever you go.
You will be able to:
• Let others see your exact location on an Internet map.
• Enable others to send you instant messages from the website when you are
on the road.
• Allow others to see your destination and estimated time of arrival.
• Let others send you new stops that are automatically added to your CoPilot
Live itinerary.
• Send tracking invites by email directly from CoPilot Live.
36
User Guide
05 Advanced
Note: To use CoPilot Live you wil need to have wireless internet enabled on
your laptop. To find out if your laptop has wireless internet, please contact your
mobile network provider. Using wireless internet with the Live service may
result in data charges from your mobile network provider.
To set up CoPilot Live you will need to register for an account.
Go to http://live.alk.com to sign up, see page 37.
05
Advanced
To Create a CoPilot Live Web Account
Connecting to the Live Server
If you want to use the Live functionality of CoPilot, you’ll need to
create a user account on the ALK website at http://live.alk.com.
• Click Menu > Live.
1 Connect your laptop to the internet.
2 Browse to the http://live.alk.com website.
3 In the login page click on Create your new account here.
4 Enter an easy-to-remember Account Name and Password for your
account.
5 Add your name and email address details.
6 Select your time zone (e.g. Eastern Time (GMT) and account region: North
America.
Entering Your Live Account Details Into CoPilot
1 Select Menu > Live > Settings.
2 In the Live Settings screen click Edit.
3 In the Live Account Information screen enter a
Device Name of your choice, followed by the
Account Name and Password created for your
Live Account. Click OK.
7 Click on Submit.
4 Define the time intervals at which CoPilot Live
sends your position.
Note: Using wireless internet with the Live service may result in data charges
5 Define how long a Live message is displayed on-screen.
from your mobile internet provider.
6 Select Yes to have CoPilot use text-to-speech when speaking a message.
7 Press OK to apply the Live settings.
37
User Guide
05 Advanced
05
Advanced
Invitations and Messages
Live Connection Status
To send an invitation to a contact so they can monitor your
progress on the internet:
CoPilot Live uses a GPRS mobile signal to send and receive messages.
A Live icon in the upper right corner of the CoPilot screen will be green when
CoPilot Live is enabled.
• Click Menu > Live > Invitations.
• Tap New.
• If you would like to set a validity period
for the invitation, check the Expires
checkbox and enter the number of days.
• Tap Next, you then have the option to
enter a message to go with the invite or
just press Send to send the invitation.
Adjusting CoPilot Live Communication Settings
Once you have connected to the internet you can alter your settings at any time
as described on page 37.
Note: Your Device Name that identifies you to others can be changed
Messages can be sent to you from the CoPilot Live
website. To see your messages from others:
• Click Menu > Live > Messages.
38
User Guide
05 Advanced
whenever you like. The Account Name and Password must first be changed on
the http://live.alk.com website and then entered into Live Settings in CoPilot.
06
Support
CoPilot Customer Support Helpline
Call a member of our Customer Support team to receive professional and
friendly assistance.
Telephone 888-872-8768 x551
Our Support team is available Monday to Friday 9:00am to 5:00pm EST.
Online Support
Please email email cpsupport@alk.com for answers to your CoPilot support
related queries and questions.
Alternatively, visit the support section at www.alk.com/support to register
and activate your CoPilot.
Our FAQs section provides answers to customers’ most frequent requests to
help you get started and get the most out of CoPilot today.
Register your CoPilot
You should register your CoPilot navigation solution at
www.alk.com/register
Registered customers receive information about downloads, map updates
and new versions of CoPilot.
39
User Guide
06 Support
07
EULA
END-USER LICENCE AGREEMENT FOR COPILOT® SOFTWARE
Please read the following agreement (“Licence”) carefully.
Acceptance: Installation or use of the enclosed ALK Technologies, Inc. (“ALK”) software (the “Software”) on
your laptop constitutes your acceptance of these terms. If you do not agree to the terms of this Licence,
you must immediately delete the Software from your laptop and destroy any copies you made of the
Software and of any written materials relating to the Software, and promptly return the Software and, if
bought as part of a package, any associated laptops to your retailer for a refund.
Licence: ALK grants you, as an individual, a non-exclusive, non-transferable right and licence to install and
use one copy of the Software on a single laptop at a time. If your Software includes CoPilot Central, you
may install and use the CoPilot Central portion on a different laptop than the CoPilot portion. Your licence to
use the Software is subject to you complying with the terms of this Licence. A licence is required for each
installation of the Software, unless the Software is (i) installed temporarily on a computer during the repair
or maintenance of the laptop on which the Software is normally installed and (ii) is immediately deleted
from such laptop as soon as those repairs or maintenance are complete. You may make one copy of the
Software for backup purposes only.
Copyright: United States copyright law and international treaty provisions protect the Software. You agree
that no title to the intellectual property in the Software is transferred to you. You further acknowledge that
title and ownership rights will remain the exclusive property of ALK, and you will not acquire any rights to
the Software except as expressly set out in this licence. You agree that any copies of the Software will
contain the same proprietary notices that appear on and in the Software.
Prohibited Use: Unless you have ALK’s prior written permission, you may not (i) use, copy, modify, alter, or
transfer the Software or accompanying documentation, except as expressly permitted in this Licence; (ii)
translate, disassemble, decompile, or reverse engineer the Software (iii) sublicense or lease the Software
or its documentation; or (iv) use the Software in a multi-user or networked environment or on a rental basis
or in a time-sharing or computer service business.
Limited Warranty: ALK warrants that the Software will perform substantially in accordance with the
accompanying written materials for a period of 30 days from the date of purchase. Any implied warranties
relating to the Software are limited to such 30 day period provided that limitation is permitted by applicable law.
40
User Guide
07 End User License Agreement
End-User Remedies: If the Software does not conform to the “Limited Warranty” above, ALK’s entire liability
and your sole and exclusive remedy will be, at ALK’s option, either to (i) correct the error, or (ii) help you
work around the error, or (iii) accept a return and issue a refund through your retailer. The Limited Warranty
is void if failure of the Software has resulted from your fault, abuse, or misapplication. If we correct an
error in the Software for you, then the unexpired portion of the Limited Warranty period as at the date you
informed us of the error will apply to the corrected software once you have received the corrected version.
NO OTHER WARRANTIES: EXCEPT AS SET OUT IN THE LIMITED WARRANTY, ALK DOES NOT WARRANT
THAT THE SOFTWARE IS ERROR FREE. ALK DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO THE
SOFTWARE, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY
RIGHTS. Some jurisdictions do not allow the exclusion of implied warranties or limits on how long an
implied warranty may last, or an exclusion of incidental damages. This means the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other
rights depending on your country.
No Liability for indirect loss: In no event will ALK be liable to you for any loss of profit, wasted time, lost
business or for any incidental, or indirect loss of any kind arising out of the performance or use of the
Software, even if ALK has been advised of the possibility of such damages.
Termination: Without prejudice to its other rights, ALK may terminate this Licence if you fail to comply with
these terms and conditions. In that situation, you must destroy all copies of the Software.
Limitations on Export: You hereby expressly agree not to export or re-export the Software, in whole or in
part, in violation of any export laws or regulations of the United States.
DISCLOSURE FOR PRODUCTS CONTAINING CANADIAN POSTAL CODE AND/OR CANADIAN STREET-LEVEL
DATA: Based on Computer File(s) licensed from Statistics Canada. © Copyright, HER MAJESTY THE QUEEN
IN RIGHT OF CANADA, as represented by the Minister of Industry, Statistics Canada 2003.
ALK Technologies, Inc. is an Authorized User of selected Statistics Canada Computer File(s) and Distributor
of derived Information Products under Licensing Agreement 6147. No confidential information about an
individual, family, household, organisation or business has been obtained from Statistics Canada.
07
EULA
U.S. Government Restricted Rights: The Software is provided with restricted and limited rights. Use,
duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in the appropriate
subparagraphs of the Commercial Computer – Restricted Rights clause at 48 C.F.R. 52.227-19 or in the
appropriate subparagraphs of the Rights in Technical Data and Computer Software clause at 252.2277013 of the Defence Federal Acquisition Regulations. The Copyright to the Software is held by ALK
Technologies, Inc., 1000 Herrontown Road, Princeton, NJ 08540 USA.
Restrictions. Except where you have been specifically licensed to do so by ALK, and without limiting the
preceding paragraph, you may not (a) use this Data with any products, systems, or applications installed
or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning,
dispatch, real time route guidance, fleet management or similar applications; or (b) with or in
communication with any positioning laptops or any mobile or wireless-connected electronic or computer
laptops, including without limitation cellular phones, palmtop and handheld computers, pagers, and
personal digital assistants or PDAs.
Choice of Law: This Licence is governed by the laws of England.
END USER LICENSE FOR SPEECH PLAYBACK
Warning. The Data may contain inaccurate or incomplete information due to the passage of time,
changing circumstances, sources used and the nature of collecting comprehensive geographic data, any
of which may lead to incorrect results.
This license applies to the speech playback function included in your Software, if any.
Copyright (c) 2002, Xiph.org Foundation. Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Personal Use Only. You agree to use this Data together with COPILOT for the solely personal, noncommercial purposes for which you were licensed, and not for service bureau, time-sharing or other
similar purposes. Accordingly, but subject to the restrictions set forth in the following paragraphs, you may
copy this Data only as necessary for your personal use to (i) view it, and (ii) save it, provided that you do
not remove any copyright notices that appear and do not modify the Data in any way. You agree not to
otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data,
and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by
mandatory laws.
41
User Guide
07 End User License Agreement
No Warranty. This Data is provided to you “as is,” and you agree to use it at your own risk. ALK and its
licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any
kind, express or implied, arising by law or otherwise, including but not limited to, content, quality,
accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or
results to be obtained from this Data, or that the Data or server will be uninterrupted or error-free.
Disclaimer of Warranty: ALK AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS)
DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Some States, Territories and Countries
do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.
Disclaimer of Liability: ALK AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL
NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE
NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR
DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE
INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER
DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF
OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF
THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A
WARRANTY, EVEN IF ALK OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. Some States, Territories and Countries do not allow certain liability exclusions or damages
limitations, so to that extent the above may not apply to you.
07
EULA
Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct
product thereof except in compliance with, and with all licenses and approvals required under, applicable
export laws, rules and regulations.
Entire Agreement. These terms and conditions constitute the entire agreement between ALK (and its
licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and
supersedes in their entirety any and all written or oral agreements previously existing between us with
respect to such subject matter.
Governing Law. The above terms and conditions shall be governed by the laws of the Netherlands, without
giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the
International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the
Netherlands for any and all disputes, claims and actions arising from or in connection with the Data
provided to you hereunder.
42
User Guide
07 End User License Agreement
Copyright © 2008. ALK Technologies Inc. All rights reserved.