Owner`s manual | Alpine CDE-9852 Car Stereo System User Manual

R
EN
MP3/WMA CD Receiver
CDE-9852
FR
• OWNER'S MANUAL
Please read before using this equipment.
ES
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Dalian Dongtai Colour Printing Technology Co., Ltd.
No.24 Liaohexisan Road, Dalian Economic&Technical
Development Zone, China
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Designed by ALPINE Japan
Printed in China (Y)
68-04123Z45-A
ENGLISH
Contents
Other Functions
Displaying the Text ......................................... 13
Operating Instructions
Displaying Time ............................................. 14
SETUP
WARNING
WARNING ................................................. 3
CAUTION .................................................. 3
PRECAUTIONS ........................................ 3
Getting Started
Turning Power On and Off ............................... 6
Sound Customizing
Subwoofer On and Off .....................................15
Setting the Subwoofer System .........................15
Visual Customizing
Dimmer Control ...............................................15
Scroll Type Setting ...........................................15
Scroll Setting (TEXT SCROLL) ......................15
Demonstration ..................................................15
Detaching and Attaching the Front Panel ........ 6
Initial System Start-Up ..................................... 6
Adjusting Volume ............................................. 7
Lowering Volume Quickly ............................... 7
Setting Time ..................................................... 7
Radio
MP3/WMA
Playing MP3/WMA Data (PLAY MODE) .......16
External Device
Connecting to an External Amplifier ...............16
iPod™ (Optional)
Listening to Radio ............................................ 7
Playback .......................................................... 16
Manual Storing of Station Presets .................... 7
Searching for a desired Song .......................... 17
Searching by Playlist ................................... 17
Searching by artist name ............................. 17
Searching by album name ........................... 17
Searching by Song name ............................. 18
Select Playlist/Artist/Album ........................... 18
Automatic Memory of Station Presets ............. 8
Tuning to Preset Stations .................................. 8
Frequency Search Function .............................. 8
CD/MP3/WMA
Playback ........................................................... 8
Repeat Play ....................................................... 9
M.I.X. (Random Play) ...................................... 9
Searching from CD Text .................................. 9
File/Folder Name Search
(concerning MP3/WMA) ............................ 10
Quick Search .................................................. 10
Quick Search ................................................... 18
Random Play Shuffle (M.I.X.) ........................ 18
Repeat Play ..................................................... 18
Displaying the Text ......................................... 19
Information
In Case of Difficulty ....................................... 19
Specifications .................................................. 21
About MP3/WMA .......................................... 10
Sound Setting
Adjusting Bass/Treble/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Defeat .......................................................... 12
Setting the Bass Control ................................. 12
Setting the Treble Control .............................. 13
Turning Loudness On/Off .............................. 13
1-EN
Installation and Connections
Warning .................................................. 22
Caution ................................................... 22
Precautions ............................................ 22
Installation ...................................................... 23
Connections .................................................... 24
LIMITED WARRANTY
2-EN
Operating Instructions
WARNING
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Failure to do so may result in an accident.
Temperature
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
Moisture Condensation
Doing so may result in an accident, fire or electric shock.
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Damaged Disc
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Maintenance
DO NOT DISASSEMBLE OR ALTER.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
3-EN
Never Attempt the Following
Correct Handling
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
New Discs
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Center Hole
Bumps
Center Hole
New Disc
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Outside
(Bumps)
Transparent Sheet
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Installation Location
Make sure the CDE-9852 will not be installed in a location
subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
4-EN
Disc Stabilizer
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
About media that can be played.
Use only compact discs with the label side showing the CD logo
marks below.
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable)
which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA
formatted audio files.
• Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA files written in a format compatible
with this unit. For details, see pages 10-11.
• ROM data other than audio files contained in a disc will not
produce sound when played back.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, the Apple logo and iPod are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer llS and Thomson.”
• “Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply
any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www. mp3licensing.com.”
5-EN
To close the front panel, press the left side until it locks as shown
in the figure below.
Getting Started
(OPEN)
MUTE
SOURCE/
Rotary encoder
POWER
3
MODE
Grasp the front panel firmly, slide to the left
pull
to remove.
, then
TITLE
Turning Power On and Off
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any other button except TITLE,
Rotary encoder and
(OPEN).
Press and hold SOURCE/POWER for at least 2 seconds
to turn off the unit.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it
may result in malfunction.
• Do not leave the front panel open, or drive the car with the panel
open as it may result in accident or malfunction.
Attaching
• The first time power is turned on, the volume will start from level 12.
1
Detaching and Attaching the Front Panel
2
Be sure to push the Rotary encoder inside the unit before opening the
front panel so that the front panel will open completely, otherwise it
may be damaged.
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Push the left side of the front panel until it locks
firmly into the main unit.
Push the Rotary
encoder inside
When you push the Rotary encoder again, it pops back out.
The Rotary
encoder pops out
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Detaching
1
2
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
Turn off the unit power.
Press
(OPEN) to open the front panel.
1
2
3
Turn off the unit power.
Press
(OPEN) to open the front panel, then
remove it.
Press RESET with a ballpoint pen or similar pointed
object.
RESET switch
6-EN
Adjusting Volume
Radio
Turn the Rotary encoder until the desired sound is
obtained.
Rotary SOURCE/POWER
encoder
BAND
Lowering Volume Quickly
TUNE
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its
previous level.
MODE
A.ME
Preset buttons
(1 through 6)
Setting Time
1
2
Listening to Radio
Press TITLE repeatedly until the time is displayed.
For details, see “Displaying the Text” (page 13)
Press and hold TITLE for at least 2 seconds while
the time is displayed.
The time indication will blink.
3
4
5
Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
When the hour has been adjusted, press MODE.
Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by pressing TITLE.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold MODE for at least 2 seconds after
setting the “hour.” Minutes will reset to “00”. If the display shows
over “30” minutes when you do this, the time will advance one hour.
• Controllable with Remote Control
This unit can be controlled with an optional Alpine remote
control. For details, consult your Alpine dealer.
• Point the optional remote control transmitter at the remote
control sensor.
1
2
Press SOURCE/POWER until a radio frequency
appears on the display.
Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1)
3
F2 (FM2)
AM
F1 (FM1)
Press TUNE to select the tuning mode.
DX SEEK (Distance mode)
SEEK (Local mode)
OFF (Manual mode)
DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
Holding down
continuously.
or
to tune in the desired station.
or
will change the frequency
Remote control sensor
Manual Storing of Station Presets
1
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
7-EN
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
CD/MP3/WMA
(OPEN)
SOURCE/POWER
Rotary
/
encoder
Automatic Memory of Station Presets
1
2
Press BAND repeatedly until the desired radio band
is displayed.
Press and hold A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
2
A.ME
MODE
4 5
TITLE
Playback
1
Press
2
Insert a disc with the label side facing up.
Press BAND repeatedly until the desired band is
displayed.
(OPEN).
The front panel will open.
The disc will be pulled into the unit automatically.
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
Close the front panel manually.
When a disc is already inserted, press SOURCE/POWER to
switch to the CD mode.
Frequency Search Function
The mode will change every time the button is pressed.
You can search for a radio station by its frequency.
1
2
3
Press and hold
for at least 2 seconds in Radio
mode to activate Frequency Search mode.
Turn the Rotary encoder to select the desired
frequency.
Press MODE to receive the selected frequency.
• The search mode in Frequency Search mode is canceled by pressing
and holding
for at least 2 seconds. Or, the search mode will be
canceled when an operation has not been performed in 10 seconds.
TUNER
DISC
IPOD*
TUNER
* Only when the iPod is connected.
3
While playing back MP3/WMA, press
select the desired folder.
Pressing and holding
continuously.
4
Press
or
or
or
will change folders
to select the desired track (file).
Returning to the beginning of the current track (file):
Press
.
Fast backward:
Press and hold
.
Advancing to the beginning of the next track (file):
Press
.
Fast forward:
Press and hold
5
8-EN
.
To pause playback, press
Pressing
/
to
/
.
again will resume playback.
6
After pressing
(OPEN) to open the front panel,
press
to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
for at least 2 seconds.
• The CD-player can play discs containing audio data, MP3 data and
WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
M.I.X. (Random Play)
Press 5
in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5
again.
CD mode :
: The tracks are played back in random sequence.
MP3/WMA Play Display
The folder number and file number will be displayed as
described below.
MP3/WMA mode :
: Only files in a folder are played back in
random sequence.
F01 T03 10'15
Folder number
display
File number
display
Elapsed time
: The files are played back in random sequence.
• Press TITLE to switch the display. Please see “Displaying the Text”
(page 13) for information about display switching.
• If the folder number or file number is three digits, “F” or “T” is not
displayed.
Repeat Play
4 to play back repeatedly the track being
Press
played.
The track (file) will be played repeatedly.
Press
4 again and select off to deactivate repeat play.
CD mode :
Searching from CD Text
Tracks can be searched and played by using the CD text on the disc. In
the case of discs that do not support text, searches can be made by using
the track numbers.
1
2
: Only a track is repeatedly played back.
MP3/WMA mode :
Press
during play.
This will set the search mode.
Turn the Rotary encoder to select the desired
track, then press MODE.
This will play the selected track.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
9-EN
File/Folder Name Search
(concerning MP3/WMA)
About MP3/WMA
You can display and search the folder and file name while listening to
the file currently being played back.
1
2
During MP3/WMA playback, press
search mode.
to activate the
Turn the Rotary encoder to select Folder Name
Search mode or File Name Search mode, then press
.
Folder Name Search mode
3
4
Turn the Rotary encoder to select the desired
folder.
Press
folder.
/
to play back the first file in the selected
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• While in Folder Name Search mode, press
to switch to File Name
Search mode.
• While in Folder Name Search mode, press A.ME to return to the
selecting search mode.
• If a disc contains only the root folder, Folder Name Search cannot be
made.
• “NO FILE” is displayed for 2 seconds if the folder that is selected by
the Folder Name Search mode contains no files.
• “ROOT” is displayed for the root folder which does not have folder
name.
• Folder Name search cannot be made during M.I.X. play.
File Name Search mode
3
4
5
Press
or
to select another Folder.
Select the desired file by turning the Rotary
encoder.
Press MODE to playback the selected file.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• Pressing A.ME will return to the previous mode.
• File Name search cannot be made during M.I.X. play.
Quick Search
You can search for tracks (files).
1
2
Press and hold
for at least 2 seconds in the CD/
MP3/WMA mode to activate Quick Search mode.
Turn the Rotary encoder to select a desired track
(file).
The selected track is played back immediately.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
10-EN
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA data) or distributing, transferring, or copying it, whether
for free or for a fee, without permission of the copyright holder is
strictly prohibited by the Copyright Act and by international
treaty.
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
Method for creating MP3/WMA files
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user’s manual for that software.
MP3/WMA files that can be played back by this device have the
file extension “mp3” / “wma”. Files with no extension cannot be
played back. (WMA ver. 7.1 and 8 are supported)
Supported playback sampling rates and bit rates
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates:
48 - 192 kbps
Note that for sampling rates, this device’s frame display
(Page 13) may not display correctly.
This device may not play back correctly depending on sampling
rates.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data.
This device can only display single-byte alphanumeric
characters (up to 30 for ID3 tags and up to 15 for WMA tags)
and the underscore. For non-supported characters, “NO
SUPPORT” is displayed.
The tag information may not be correctly displayed, depending
on the contents.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CD-RW
using CD-R writing software. A disc can hold up to 510 files/
folders (including Root Folders). However, the maximum number
of folders is 255.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs,
and CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of folder/file name characters is limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Formats supported
This device supports CD-ROM XA, Mixed Mode CD, Enhanced
CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
WMA: WMA tag
Root folder
Order of tracks
The unit plays the files in the order that the writing software
writes them. Therefore, the playing order may not be the same
as the order you input. The playback order of the folders and
files is as follows. However, the folder and file playback order
differs from the folder and file number indicated on the display.
The root folder is found at the top of the file system. The root folder
contains all folders and files.
Root folder
Folder
MP3/WMA File
11-EN
Setting the Bass Center Frequency
Sound Setting
3-1 Press SOURCE/POWER to select the desired bass
center frequency.
SOURCE/POWER
80Hz
Rotary encoder
BAND
MENU
100Hz
120Hz
60Hz
80Hz
Emphasize the displayed bass frequency ranges.
Setting the Bass Bandwidth
3-2 Press BAND to select the desired bass bandwidth.
MODE
Adjusting Bass/Treble/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat
1
BASS
TREBLE
SUBW*
DEFEAT
VOLUME
BASS
BALANCE
FADER
Bass level: –7 ~ +10
Treble level: –7 ~ +7
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
• If MODE is not pressed within 5 seconds after selecting the BASS,
TREBLE, BALANCE, FADER, DEFEAT or SUBW mode, the unit
automatically returns to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS
and TREBLE will return to the factory defaults.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
BASS ENGINE
2
Setting the Bass Level
3-3*1Turn the Rotary encoder to select the desired
bass level (–7~+10).
Press MODE repeatedly to choose the desired
mode.
Each press changes the mode as follows:
2
Change the boosted bass bandwidth to wide or narrow. A
wide setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.
SETUP
RETURN (OFF)
BASS ENGINE
Press
or
to select the BASS (Bass Center
Frequency) control mode.
BASS
12-EN
TREBLE
You can emphasize or weaken the bass level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the bass control
setting will be turned off automatically.
• The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass band width settings adjusted for one source are
effective for all other sources (FM, AM, CD etc.).
• This function is inoperable when DEFEAT is set to ON.
• While in the bass adjusting mode, TREBLE CONTROL adjusting
mode can be recalled by pressing
or
.
*1 The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Font and Rear)/Defeat” (page 12).
Bass level indicator’s display
Bass level is usually displayed
Setting the Treble Control
Other Functions
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
BASS ENGINE
2
SETUP
RETURN (OFF)
BASS ENGINE
Press
or
to select the TREBLE (Treble
Center Frequency) control mode.
BASS
TITLE
TREBLE
Setting the Treble Center Frequency
3-1 Press SOURCE/POWER to select the desired treble
Center frequency.
10.0kHz
12.5kHz
15.0kHz
7.5kHz
10.0kHz
Emphasize the displayed treble frequency ranges.
Setting the Treble Level
3-2*2Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasize the treble level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
• This function is inoperable when DEFEAT is set to ON.
• While in the treble adjusting mode, BASS CONTROL adjusting mode
can be recalled by pressing
or
.
*2 The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Font and Rear)/Defeat” (page 12).
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name, and the tag, etc., while playing
MP3/WMA files.
Press TITLE.
The display will change every time the button is pressed.
The display in Radio mode:
FREQUENCY
CLOCK
FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
TEXT (DISC NAME)*1
TEXT (TRACK NAME)*1
TRACK NO./ELAPSED TIME
The display in MP3/WMA mode:
FOLDER NO./FILE NO./ELAPSED TIME
FOLDER NO./FILE NO./CLOCK
FOLDER NAME*3
FILE NAME
ARTIST NAME*2 ALBUM NAME*2
TRACK NAME*2
FRAME*4
FOLDER NO./FILE NO./ELAPSED TIME
*1 Displayed during playback of a disc with CD Text.
*2 ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3
tag/WMA tag information is displayed (e.g., track name, artist name,
and album name). All other tag data is ignored.
If the Scroll setting (page 15) is set to “SCROLL AUTO,” the tag
information will scroll automatically.
*3 “ROOT” is displayed for the root folder which doesn’t have folder
name.
*4 The recording sampling rate and bit rate of the MP3/WMA file are
displayed. A WMA file of variable bit rate displays the average bit
rate.
Press and hold MODE for at least 2 seconds to activate
or deactivate the loudness mode.
“LD” indicator lights.
13-EN
About “Text”
About the indication display
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
When displaying Text, the following indicators are lit
according to the mode.
The position of a song being played back is shown lit in the
total number of songs shown. The display example is as
shown below. Also lights when operation, such as fast
forward, etc., is performed.
• Some characters may not be displayed correctly with this device,
depending on the character type.
• When the Scroll Setting (page 15) is set to “SCROLL MANU,” press
and hold TITLE for at least 2 seconds to scroll the Text information
only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME
DISPLAY or TAG DISPLAY mode).
• “NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
Displaying Time
Lights up when a disc is inserted
Song position display example
Press TITLE repeatedly until the time is displayed.
<First half>
<Middle>
<Last half>
• For example, when the 5th of 10 songs in the disc is played back,
“
” is displayed.
Indicator/
Mode
CD Mode
MP3/WMA Mode
iPod mode
––
Folder Name*2
being displayed
––
––
File Name*2
being displayed
––
––
Artist Name*1
Artist Name*1
being displayed being displayed
Text (Disc
Name*3) being
displayed
Album Name*1 Album Name*1
being displayed being displayed
Text (Track
Name*3) being
displayed
Track Name*1
Track Name*1
being displayed being displayed
*1 Tag information
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
displayed.
*2 If there is no folder name or file name, “FOLDER”/“FILE” is
displayed.
*3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.
14-EN
Each press changes the display.
For details, see “Displaying the Text” (page 13).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE to
display the time.
Setting the Subwoofer System
SETUP
SUBW SYS1 (Initial setting) / SUBW SYS2
Select either SYS1 or SYS2 for the desired subwoofer effect.
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
Rotary encoder
MENU
SUBW SYS1: Subwoofer level changes according to the main
volume setting.
SUBW SYS2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Visual Customizing
Dimmer Control
DIMMER AUTO (Initial setting) / DIMMER MANU
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.
MODE
Scroll Type Setting
SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)
A typical SETUP procedure is shown in steps 1 to 4 as
follows. See below for further information about each
SETUP menu.
1
Press MENU to select the SETUP mode, then press
MODE.
BASS ENGINE
2
SETUP
RETURN (OFF)
BASS ENGINE
Press
or
to select the desired SETUP
menu, then Press MODE.
(e.g. Select SUBWOOFER)
DIMMER
SUBWOOFER
(SUBW SYSTEM)*
PLAY MODE
SCROLL TYPE
TEXT SCROLL
POWER IC
DEMO
DIMMER
* Displayed only when SUBW is ON.
3
Turn the Rotary encoder to change the setting.
4
Press MENU to select RETURN.
(e.g. Select SUBW ON or SUBW OFF.)
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Choose from two scrolling methods.
Select the type you prefer.
SCROLL TYPE1: The characters scroll sequentially, appearing
from the right side of the display.
SCROLL TYPE2: The characters are displayed one by one,
and disappear one by one from the left side
of the display after the screen is filled up with
the characters.
Scroll Setting (TEXT SCROLL)
SCROLL AUTO / SCROLL MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3/WMA files, folder
names, and tags.
SCROLL AUTO: The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically. Also, tag information is
automatically scrolled without pressing TITLE
in the tag information display mode.
SCROLL MANU: The display is scrolled when a disc is loaded
or when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display.
Demonstration
Sound Customizing
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display.
Subwoofer On and Off
• To quit Demo mode, set to DEMO OFF.
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press MODE repeatedly to select the
SUBW mode.
BASS
TREBLE
SUBW
BALANCE
DEFEAT
VOLUME
BASS
FADER
2 Adjust the Level by turning the Rotary encoder.
15-EN
MP3/WMA
iPod™ (Optional)
Playing MP3/WMA Data (PLAY MODE)
CDDA (Initial setting) / CDDA/MP3
This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback may
be difficult. For these special cases, you can select playback of CD data
only. When a disc contains both CD or the MP3/WMA data, playback
starts from the CD data portion of the disc.
Rotary SOURCE/POWER
encoder
/
CDDA:
Only CD data can be played back.
CDDA/MP3: Both CD data and MP3/WMA file tracks can be
played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, perform the setting after you remove the disc.
A.ME
MODE
4 5
6
TITLE
External Device
Connecting to an External Amplifier
POWER IC ON (Initial setting) / POWER IC OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
An iPod™, iPod™ mini or iPod™ nano can be connected to the
CDE-9852 by using the proprietary ALPINE FULL SPEED™
Connection Cable (KCE-422i). When the CDE-9852 is connected by
using the cable, the controls on the iPod™ are not functional.
About iPods™ usable with this unit
POWER IC OFF : Use this mode when the front pre-amplifier of
the unit are used to drive an external amplifier
connected to the speakers. In this setting, the
head unit’s internal amplifier has no output to
drive speakers.
Front
left
Amplifier
The unit can be used with third generation and above iPod™
photo, iPod™ minis or iPod™ nano. iPod™ Shuffle cannot be
used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Front
right
POWER IC ON : The speakers are driven by the built-in
amplifier.
Speakers
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
Front
right
Rear
right
Third generation iPod:Ver. 2.3
Forth generation iPod:Ver. 3.0.2
iPod photo:Ver.1.0
iPod mini:Ver. 1.3
iPod nano:Ver. 1.0
• The unit cannot be used with the software versions earlier
than 22nd Feb.2005. For details about “iPod Software
Update”, refer to the iPod Instruction Manual.
Playback
1
2
Press
or
to select the desired song.
Return to the beginning of the current song:
Press
.
Rear
left
Fast backward:
Press and hold
.
Advance to the beginning of the next song:
Press
.
Front
left
• No sound is produced by the system when the power output is set to
OFF.
Press SOURCE/POWER to switch to the iPod
mode.
Fast forward:
Press and hold
3
.
To pause playback, press
Pressing
/
/
.
again will resume playback.
• If a song is playing on the iPod when it is connected to the
CDE-9852, it will continue playing after the connection.
16-EN
To search for a song of the selected album
Searching for a desired Song
1 After selecting the album in step 2*1, press
to change
to the song search mode of the selected album.
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the CDE-9852 can use these to ease song
searches.
Searching by Playlist
1
2
Press
to activate the search selection mode.
Turn the Rotary encoder to select the PLAYLIST
search mode, then press .
PLAYLIST
ARTIST
ALBUM
SONG
PLAYLIST
3*1 Turn the Rotary encoder to select the desired
Playlist.
4
Press
/
.
1 After selecting the playlist in step 3*1, press
to change
to the song search mode of the selected playlist.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• In the search mode, pressing A.ME will return to the previous mode.
• All songs in the iPod are played back by selecting the stored “iPod
name” in step 3*1.
• Playlist search cannot be made during M.I.X. play.
• “NO SONG” will be displayed if there are no songs in the selected
playlist in the PLATLIST search mode.
to activate the search selection mode.
Turn the Rotary encoder to select the ARTIST
search mode, then press .
PLAYLIST
3
*2
4
ARTIST
ALBUM
SONG
PLAYLIST
Turn the Rotary encoder to select the desired
Artist.
Press
/
1
2
Press
to activate the search selection mode.
Turn the Rotary encoder to select the ALBUM
search mode, then press .
PLAYLIST
3
*3
4
ARTIST
ALBUM
SONG
PLAYLIST
Turn the Rotary encoder to select the desired
Album.
Press
/
.
All the songs of the selected Albums are played back.
To search for a song of the selected album
1 After selecting the album in step 3*3, press
to change
to the song search mode of the selected album.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
Searching by artist name
Press
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• In the search mode, pressing A.ME will return to the previous mode.
• If you choose ALL in step 3*2, and you press
/ , all songs in the
iPod are played back. If you choose ALL, and you press , the
ALBUM search mode for all artists is activated.
• If you choose ALL in step 2*1, and you press
/ , all songs of the
selected artist are played back. If you choose ALL, and you press ,
the SONG search mode for the selected artist is activated.
• Artist name search cannot be made during M.I.X. play.
Searching by album name
The selected playlist is played back.
To search for a song in the selected playlist
1
2
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• In the search mode, pressing A.ME will return to the previous mode.
• If you choose ALL in step 3*3, and you press
/ , All songs in the
iPod are played back. If you choose ALL, and you press , the
SONG search mode for all albums is activated.
• Album name search cannot be made during M.I.X. play.
.
All the songs of the selected Artist are played back.
To search for an album of the selected artist
1 After selecting the artist in step 3*2, press
to change
to the album search mode of the selected artist.
2*1Turn the Rotary encoder to select an album.
3 Press
/
to play back all songs of the selected album.
17-EN
1
Searching by Song name
1
2
Press
PLAYLIST
3
4
ARTIST
ALBUM
SONG
2
PLAYLIST
M.I.X.
To cancel M.I.X. play, select (off) with the above
procedure.
The selected song is played back.
Shuffle ALL:
Playlist/Artist/Album can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
Press
or
Album.
Shuffle ALL plays all songs in the iPod randomly. Any one song
does not play back again until all songs have been played back.
1
The songs will be played back in random sequence.
M.I.X.
(off)
(Shuffle ALL)
2
M.I.X.
To cancel M.I.X. play, select (off) with the above
procedure.
• If Shuffle All is selected, the selected ones which being played back in
the search mode are cancelled.
Repeat Play
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Quick Search
You can search for songs.
Press and hold
for at least 2 seconds to activate
Quick Search mode.
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• If many songs are in the iPod, it takes time to serch for songs.
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod is displayed as M.I.X. on the
CDE-9852.
Shuffle Albums:
Album shuffle playback plays back all songs in order, then
randomly selects the next album. All songs of that album are
played back in order, and so on. Any one album is played just
once.
Shuffle Songs:
Song shuffle randomly plays back certain selected songs. Any
one song plays back just once until all songs have been played
back.
18-EN
Press 6.
to select the desired Playlist/Artist/
• If search selection mode is not activated, only Song is searched, this
operation is not possible.
• If an album is selected from an artist search, the album can be
searched.
• During shuffle (M.I.X
.) playback, this operation is not possible.
2
(off)
Press MODE.
Select Playlist/Artist/Album
1
M.I.X.
(Shuffle Songs)
• For details of the search mode, refer to “Searching for a desired
Song” (page 17).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X
.), the songs will not play back randomly even when
Shuffle album is selected.
Turn the Rotary encoder to select the desired
Song.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• In the search mode, pressing A.ME will return to the previous mode.
• Song name search cannot be made during M.I.Xplay.
1
.
The songs will be played back in random sequence.
M.I.X.
(Shuffle Albums)
to activate search selection mode.
Turn the Rotary encoder to select the SONG
search mode, then Press .
Press 5
Press
4.
The file will be played repeatedly.
RPT
(off)
(Repeat One)
2
RPT
To cancel repeat play, select (off) with the above
procedure.
• During repeat playback, no other songs are selectable by pressing
or
.
Displaying the Text
Information
You can display the tag information of a song in the iPod.
Press TITLE.
Each press changes the display.
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
ARTIST NAME*
ALBUM NAME*
SONG TITLE*
TRACK NO./ELAPSED TIME
* TAG information
If the Scroll Setting (page 15) is set to “SCROLL AUTO,” the tag
information will scroll automatically.
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
• When the Scroll Setting (page 15) is set to “SCROLL MANU,”
press and hold TITLE for at least 2 seconds to scroll the tag
information only once.
• Only alphanumeric characters (ASCII) can be displayed.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 128
(128 byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the CDE-9852.
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not operate
with the vehicle's ignition off.
• Improper power lead (Red) and battery lead (Yellow) connections.
- Check power lead and battery lead connections.
• Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
• Internal micro-computer malfunctioned due to interference noise
etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
19-EN
CD
CD Player not functioning.
• Out of operating temperature range +50°C (+120°F) for CD.
- Allow the vehicle’s interior (or trunk) temperature to cool.
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
Indication for CD Player
• Protective circuit is activated due to high temperature.
- The indication will disappear when the temperature returns to
normal operating range.
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press the
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• The disc is very dirty.
- Clean the disc.
• The disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc. Consult
your nearest Alpine dealer.
• Mechanism error.
1) Press the
button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
CD playback sound skips without vibration.
• The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
• Mechanical error
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest Alpine dealer.
• When “ERROR” is displayed:
If that the disc cannot be ejected by pressing , press the RESET
switch (refer to page 6) and press
again.
If the disc still cannot be ejected, consult your Alpine dealer.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
CD-R/CD-RW playback not possible
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
MP3/WMA
MP3 or WMA is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” (page 10-11), then rewrite in the
format supported by this device.
Audio
The sound is not output from the speakers.
• Unit has no output signal of the internal amplifier.
- POWER IC is switched to “ON” (page 16).
• The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
Indication for iPod Mode
• The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
“Connections”).
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the adapter.
20-EN
Specifications
• Communication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod cable.
• Caused by the iPod Software Version not being compatible with
the unit.
- Update the iPod Software Version to be compatible with the
unit.
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.7-107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
530-1,710 kHz
22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
PICKUP
Wave length
Laser power
795 nm
CLASS I
GENERAL
Power Requirement
14.4 V DC
(11–16 V allowable)
Power Output
16 W RMS × 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage
2 V/10 k ohms
Bass
+20/-14 dB at 100 Hz
Treble
±14 dB at 10 kHz
Weight
1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
162 mm (6-3/8")
NOSEPIECE SIZE
Width
Height
Depth
170 mm (6-11/16")
46 mm (1-13/16")
24 mm (15/16")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
21-EN
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 3 and 5 of this manual thoroughly
for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
MAKE THE CORRECT CONNECTIONS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury.
If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
22-EN
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your CDE-9852. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the CDE-9852 to the fuse box, make sure
the fuse for the intended circuit of the CDE-9852 has the
appropriate amperage. Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult your Alpine
dealer.
• The CDE-9852 uses female RCA-type jacks for connection to
other units (e.g. amplifier) having RCA connectors. You may
need an adaptor to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle’s chassis.
Installation
• For the screw marked “*2”, use an appropriate screw for the chosen
mounting location.
Connect each input lead coming from an amplifier or
equalizer to the corresponding output lead coming
from the left rear of the CDE-9852. Connect all other
leads of the CDE-9852 according to details
described in the CONNECTlONS section.
Detachable Front
Panel
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
3
Slide the CDE-9852 into the dashboard until it clicks.
This ensures that the unit is properly locked and will
not accidentally come out from the dashboard.
Install the detachable front panel.
Removal
1. Remove the detachable front panel.
Accessory List
•
•
•
•
•
•
•
Head unit .............................................................................1
Power cable.........................................................................1
Mounting sleeve ..................................................................1
Carrying case ......................................................................1
Bracket key..........................................................................2
Screw (M5 × 8) ....................................................................4
Owner’s Manual .............................................................1 set
2. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
This Unit
Bracket Keys
(Included)
• The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
3. Pull the unit out, keeping it unlocked as you do so.
Less than 35°
<JAPANESE CAR>
1
Mounting Sleeve
(Included)
Face plate
Dashboard
this unit
Screws (M5 × 8)
(Included)
Ground Lead
*3
This Unit
Remove the Detachable Front Panel (refer to page 6).
Slide mounting sleeve from main unit (see
“Removal” on page 23).
2
Screw
• Secure the ground lead of the unit to a clean metal spot using a screw
(*3) already attached to the vehicle’s chassis.
Hex Nut (M5)
*2
Mounting Bracket
Bolt Stud
Metal
Mounting
Strap
*1
This Unit
Ground Lead
Chassis
23-EN
Connections
To iPod
Antenna
Blue
POWER ANT
To power antenna
Blue/White
REMOTE
TURN-ON
To amplifier or equalizer
Orange
ILLUMINATION
To the instrument cluster illumination
lead
Red
IGNITION
Ignition Key
Yellow
BATTERY
Black
GND
Battery
Gray
SPEAKER
RIGHT FRONT
Speakers
Front Right
Gray/Black
Violet/Black
SPEAKER
RIGHT REAR
Violet
Rear Right
Green
SPEAKER
LEFT REAR
Green/Black
Rear Left
White/Black
SPEAKER
LEFT FRONT
White
Front Left
Speakers
Amplifier
*1 When Subwoofer is set to OFF :Output is from Front speakers
When Subwoofer is set to ON :Output is from Subwoofer
24-EN
Front/
Subwoofers*1
iPod Direct Connector
Battery Lead (Yellow)
iPod control signals.
Connect this to an iPod, using the FULL SPEED™
Connection Cable (KCE-422i) (separately sold).
Connect this lead to the positive (+) post of the vehicle’s
battery.
Antenna Receptacle
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Ground Lead (Black)
Right Front (+) Speaker Output Lead (Gray)
Right Front (–) Speaker Output Lead (Gray/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Illumination Lead (Orange)
Left Front (–) Speaker Output Lead (White/Black)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
the unit to dim whenever the vehicle’s lights are turned on.
Left Front (+) Speaker Output Lead (White)
Switched Power Lead (Ignition) (Red)
Fuse Holder (10A)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
Front output/Subwoofer RCA Connectors
Power Supply Connector
RED is right and WHITE is left.
RCA Extension Cable (sold separately)
FULL SPEED™ Connection Cable (KCE-422i) (sold
separately)
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• eKep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. our
Y Alpine dealer carries various noise
suppressors, contact them for further information.
• our
Y Alpine dealer knows best about noise prevention m easures so consult your dealer for further information.
25-EN
Download PDF

advertising