Owner`s manual | Alpine DVA-9965 Car Stereo System User Manual

R
EN
HD-Radio/DVD-Video Tuner
DVA-9965
FR
TM
ES
DIGITAL VIDEO
• OWNER’S MANUAL
Please read before using this equipment.
ES
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
IT
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Yamagata Printing Co.,Ltd.
2-6-34, Takashima, Nishi-ku, Yokohama, kanagawa, Japan
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
Designed by ALPINE Japan
Printed in Japan (Y)
68-02065Z30-A
SE
CHA-S634
CHA-1214
• CD changer for DVA-9965.
• Changeur CD pour DVA-9965.
• Cambiador de CD para DVA-9965.
• CD changer for DVA-9965.
• Changeur CD pour DVA-9965.
• Cambiador de CD para DVA-9965.
CHM-S630
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3
PLAY BACK and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus
model is a super-compact 6-disc changer with a CD-R/RW PLAY BACK.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC,
CD-R/RW PLAY BACK, MP3 PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12
disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques super compact doté de la fonction CD-R/
RW PLAY BACK.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK,
MP3 PLAY BACK y CD TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630
M-Bus es un cambiador de seis discos de tamaño reducido con un CD-R/RW PLAY BACK.
ENGLISH
Contents
Operating Instructions
WARNING
WARNING ......................................................... 3
CAUTION .......................................................... 3
PRECAUTIONS ................................................ 3
Discs playable on this unit ............................. 5
About the GlideTouch™ Bar
Operation ............................................... 7
Getting Started
Turning Power On and Off ........................................
Initial System Start-Up ..............................................
Setting the Time and Calendar ..................................
Opening and Closing the Movable Display ..............
Display Tilt Adjustment ............................................
Adjusting Volume ......................................................
Lowering Volume Quickly ........................................
Detaching and Attaching the Front Panel ..................
8
8
8
9
9
9
9
9
Radio
Listening to Radio ...................................................
Manual Storing of Station Presets ...........................
Automatic Memory of Station Presets ....................
Tuning to Preset Stations .........................................
Frequency Search Function .....................................
10
10
10
10
11
CD/MP3/WMA
Playback .................................................................. 11
Repeat Play .............................................................. 12
M.I.X. (Random Play) ............................................. 13
Scanning Programs .................................................. 13
Searching from CD Text .......................................... 13
File/Folder Name Search (concerning MP3/WMA) .... 13
About MP3/WMA ................................................... 14
DVD/Video CD
Playing DVD/Video CD ..........................................
Stopping Playback (PRE-STOP) .............................
Stopping Playback ...................................................
Fast-forwarding/Fast-reversing ...............................
Finding the Beginning of Chapters or Tracks .........
Playing Still Frames (pausing) ................................
Forward/reverse frame-by-frame Playback .............
Slow Motion Playback ............................................
Searching by Title Number (DVD only) .................
Searching Directly by Chapter or Track Number ...
Chapter/Track/Title Repeat Playback ......................
16
17
17
17
17
17
17
17
17
18
18
Switching the Audio Tracks ....................................
Switching the Angle (DVD only) ............................
Switching the Subtitles (subtitle language)
(DVD only) ..........................................................
Displaying the Disc Status (DVD only) ..................
Displaying the Disc Status (Video CD only) ..........
GlideTouch bar Operation .......................................
18
18
19
19
19
20
Sound Setting
Adjusting Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat ........................ 20
Selecting the EQ mode (Factory settings) ............... 21
Setting User's EQ mode .......................................... 21
Adjusting and Storing the Parametric Equalizer
Curve ................................................................... 21
Adjusting and Storing the Graphic Equalizer Curve ... 22
Recalling the Stored Equalizer Curve ..................... 22
About the Crossover ................................................ 23
Adjusting and Storing the Crossover Settings ......... 24
Recalling the Stored Crossover Settings ................. 25
About Time Correction ........................................... 25
Setting the Time Correction Unit ............................ 26
Adjusting and Storing the Time Correction ............ 26
Recalling the Stored Time Correction Settings ....... 27
Setting the MX Mode .............................................. 27
Other Functions
Displaying the Text .................................................
Displaying Time ......................................................
Blackout Mode On and Off .....................................
Setting the Multicolor Illumination .........................
Rear DVD Function ................................................
28
29
29
29
29
i-Personalize™ Data Download
Operation
About i-Personalize™ Data Download ................... 30
Data Downloading ................................................... 31
Downloading the Wallpaper .................................... 31
DVD Setup
DVD Setup Operation .............................................
Setting the language ............................................
Setting the TV Screen ..........................................
Setting the Country Code ....................................
Setting the Rating Level (Parental Lock) ............
Setting the Digital Output ....................................
32
32
33
33
33
34
Custom Setup
Custom Setup Operation .........................................
Setting the CD Play Mode ...................................
Setting the Video CD Play Mode ........................
Setting the Pause Mode .......................................
Setting the Downmix Mode .................................
35
35
35
35
35
1-EN
SETUP
External Audio Processor (Optional)
Setup Operation ....................................................... 36
General Setting
Setting the Clock display ........................................
Playing MP3/WMA Data ........................................
Sound (Beep) Guide Function .................................
Changing the Sound (Beep) Guide Pattern .............
Turning Mute Mode On/Off ....................................
Setting Tone Defeat for External Devices ...............
Setting the AUX Mode (V-Link) .............................
Setting the Digital Output .......................................
36
36
36
36
37
37
37
37
Audio Setting
Subwoofer On and Off ............................................ 37
Setting the Response Slope for the High Range
Speaker ................................................................ 37
Display Setting
Dimmer Control ......................................................
Setting the Display Dimmer ....................................
Changing the Display Color ....................................
Scroll Setting ...........................................................
Scroll Type Setting ..................................................
Switching the Character Font ..................................
Switching the Animation Display Type ..................
Opening Message ON/OFF Setting ........................
Setting of Calendar Display Pattern Switching .......
37
37
38
38
38
38
38
38
38
Demo Setting
Demonstration ......................................................... 38
39
39
39
40
40
40
40
40
iPod™ Operation (Optional)
Playback ..................................................................
Searching for a desired Song ...................................
Quick Search ...........................................................
Random Play Shuffle (M.I.X.) ..............................
Repeat Play ..............................................................
Displaying the Text .................................................
41
41
42
42
43
43
Changer (Optional)
Controlling CD Changer (Optional) ........................ 44
Playing MP3 Files with the CD Changer (Optional) ... 44
Multi-Changer Selection (Optional) ....................... 44
2-EN
45
46
46
46
47
47
48
48
48
49
49
49
50
50
50
51
51
51
52
52
53
53
Remote Control
SAT Radio Receiver (Optional)
Receiving Channels with the SAT Radio Receiver
(Optional) ............................................................
Checking the SAT Radio ID Number ......................
Storing Channel Presets ..........................................
Receiving Stored Channels .....................................
Channel/Category Search Function .........................
Quick Search Function ............................................
Changing the Display ..............................................
Setting the Auxiliary Data Field Display ................
Adjustment Procedure for Dolby Surround ............
Setting the Speakers ................................................
Set MX Mode of the External Audio Processor ......
X-OVER Adjustment ..............................................
Performing Time Correction Manually (TCR)/
Phase Switching ..................................................
Calculating the Time Correction .........................
Inputting the Time Correction .............................
Switching the Phase .............................................
Graphic Equalizer Adjustments ...............................
Parametric Equalizer Adjustments ..........................
Setting Bass Compressor .........................................
Speaker Setup ..........................................................
Setting of Dolby Digital ..........................................
Adjusting the speaker levels
(OUTPUT LEVEL) .........................................
Mixing bass sound to the rear channel
(REAR MIX) ...................................................
Adjusting the acoustic image
(BI-PHANTOM) .............................................
Achieving powerful high volume sound
(LISTENING) ..................................................
Adjusting the DVD Level ........................................
Using the Pro Logic II Mode ..................................
Linear PCM Setting .................................................
Storing Settings in the Memory ..............................
Getting out the Preset Memory ...............................
Controls on Remote Control ................................... 54
When Using the Remote Control ............................ 55
Battery Replacement ............................................... 55
Information
About DVDs ............................................................
Terminology ............................................................
List of Language Codes ..........................................
List of Country Codes .............................................
In Case of Difficulty ................................................
Specifications ..........................................................
56
57
58
59
61
64
Installation and Connections
Warning ...................................................................
Caution ....................................................................
Precautions ..............................................................
Installation ...............................................................
Connections .............................................................
System Example ......................................................
LIMITED WARRANTY
65
65
65
66
68
70
Operating Instructions
WARNING
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.
Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity
(+ and –) as instructed. Rupture or chemical leakage from the
battery may cause fire or personal injury.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
PRECAUTIONS
Product Cleaning
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Use a soft dry cloth for periodic cleaning of the product. For
more severe stains, please dampen the cloth with water only.
Anything else has the chance of dissolving the paint or damaging
the plastic.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Temperature
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
Moisture Condensation
Failure to do so may result in fire or electric shock.
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Damaged Disc
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism.
Use for other than its designed application may result in fire,
electric shock or other injury.
Maintenance
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS
IN INSERTION SLOTS OR GAPS.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Doing so may result in personal injury or damage to the product.
3-EN
Never Attempt the Following
Installation Location
Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power
is off.
Make sure the DVA-9965 will not be installed in a location
subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will
not leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“Error” will be displayed on your player if you insert a disc
incorrectly. If “Error” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
INCORRECT
CORRECT
New Discs
As a protective measure to prevent the CD from jamming,
“Error” will be displayed if discs with irregular surface are
inserted or inserted incorrectly. When a new disc is inserted into
the player and ejected after initial loading, using your finger, feel
around the inside of the center hole and outside edge of the disc.
If you feel any small bumps or irregularities, this could inhibit
proper loading of the disc. To remove the bumps, rub the inside
edge of the hole and outside edge of the disc with a ballpoint pen
or other such instrument, then insert the disc again.
Center Hole
Center Hole
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause
the CD player to skip. For routine cleaning, wipe the playing
surface with a clean, soft cloth from the center of the disc to the
outer edge. If the surface is heavily soiled, dampen a clean, soft
cloth in a solution of mild neutral detergent before cleaning the
disc.
New
Disc
Disc Accessories
Bumps
Outside
(Bumps)
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the disc to
be out of standard specifications and may create operational
problems. We recommend not using these accessories on discs
played in Alpine CD players.
Transparent Sheet
4-EN
Disc Stabilizer
Discs playable on this unit
Discs that cannot be played
Playable Discs
DVD-ROMs, DVD-RAMs, DVD + Rs, DVD + RWs, CD-ROMs
(excluding MP3/WMA files), photo CDs, etc.
The discs listed below can be played on this unit.
Mark (logo)
Recorded
content
Disc size
DVD region number (playable region number)
Max.
playing time
One-sided
disc
Approx.
4 hours
12 cm*
Two-sided
disc
Approx.
8 hours
Audio
+
Video
(Moving
pictures)
DVD
Video
One-sided
disc
Approx.
80 Minutes
8 cm
Two-sided
disc
Approx.
160 Minutes
Video
CD
DIGITAL VIDEO
Audio
+
Video
(Moving
pictures)
12 cm
Approx.
74 Minutes
8 cm
Approx.
20 Minutes
12 cm
Approx.
74 Minutes
VIDEO CD
Music
CD
Audio
Approx.
8 cm
(CD single) 20 Minutes
* Two-layer DVD disc compatible
This DVD player will play back any disc whose region number is
1 (or All). DVDs with a region number other than those listed
below, cannot be played on this DVD player.
1
ALL
Video CDs
This DVD head unit is compatible with playback control (PBC)
compatible video CDs (version 2.0).
“PBC” is a function by which you can use menu screens recorded
on the disc to find the scene you want to watch and view various
types of information in dialogue style.
Using compact discs (CD/CD-R/CD-RW)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA
formatted audio files.
• Some of the following discs may not be played on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA files written in a format compliant
with ISO9660 level 1 or level 2. For details, see pages 14 and
15.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
Tips for making your own CDs
The DVA-9965 plays DVD Video, Video CD, Audio CD and has
a built in MP3/WMA decoder.
The following information is designed to help you create your
own music CDs (either Audio CD or MP3/WMA encoded CD-R/
RW files).
What is the difference between an Audio and MP3/WMA
CD?
An Audio CD is the same format as the commercial CDs you buy in
the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer 3)/
WMA (Windows Media Audio) is a data file that uses a
compression scheme to reduce the size of the music file.*
Hybrid Audio CD and Data (MP3/WMA) CD-R/RW discs:
The DVA-9965 can read either sector on the disc. Choose CD-DA
to play the CD audio section or MP3/WMA to play the MP3/
WMA section.*
Continued
5-EN
Multisession CD-R/RW:
Once a recording has been stopped, this is considered as one
session. If the disc is not closed (finalized), additional data may
be added. Once this additional data has been recorded, this
becomes a “multisession” CD. The DVA-9965 can only read
multisession DATA Formatted discs (MP3/WMA files - Not
Audio CD files).
Properly formatted MP3/WMA Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32
characters) or Joliet (Windows or Macintosh long filenames) file
naming conventions*.
*Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
Using DVD-Rs/DVD-RWs
• This unit is compatible only with discs recorded in the DVDVideo mode. Discs recorded in the DVD-VR mode cannot be
played back.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device. (This unit has a copy protection function. Discs copied
illegally will not be played back. Some files recorded by a
software using an improper recording system may be
recognized as illegally copied.)
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular
discs, flawed discs, dirty discs, when the pickup lens of this
DVD player is dirty, or when moisture condensation has
occurred inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/
DVD-RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs are more
affected by heat, moisture, and direct sunlight. If left in a car,
etc., damage may occur and it might not play on this unit.
6-EN
Disc terminology
Title
If titles are programmed for the DVD, these are the largest units
of division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories. “Dolby,”
“Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
• “DTS” and “DTS2.0 + Digital Out” are trademarks of Digital
Theater Systems, inc.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple and the Apple logo are trademarks of Apple Computer,
Inc., registered in the U.S. and other countries.
iPod and iPod mini are trademarks of Apple Computer, Inc.
• HD RadioTM Technology Manufactured Under License From
iBiquity Digital Corporation. iBiquity Digital and the HD Radio
and HD Symbols are trademarks of iBiquity Digital Corporation.
U.S. and Foreign Patents.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer llS and Thomson”
• “Supply of this product only conveys a license for private,noncommercial use and does not convey a license nor imply any right
to use this product in any commercial (i.e. revenue-generation)
real time broadcasting (terrestrial, satellite, cable and/or any
other media), broadcasting/streaming via internet, intranets and/
or other networks or in other electronic content distribution
systems, such as pay-audio or audio-on-demand applications. An
independent license for such use is required. For details, please
visit http://www.mp3licensing.com.”
About the GlideTouch™ Bar Operation
1
Touch or press the desired position on the GlideTouch bar.
Function guide
ON
OFF
GlideTouch bar
Press any one of the 6 positions on the GlideTouch bar to which a function has been assigned in the guide display.
For example, to select ON, press the GlideTouch bar directly below where ON is indicated in the guide display. The manual
expresses this as follows: “Change the setting by pressing the GlideTouch bar below either the ON or OFF function indicators.”
2
Move your finger on the GlideTouch bar to the left or right.
GlideTouch bar
Place your finger on the GlideTouch bar and slide it gently to the left or right. Items or lists in the display will change as you
move your finger across the GlideTouch bar.
To select items on the following page, scroll the page as follows:
• Place and hold your finger on either side of the GlideTouch bar for at least 3 seconds.
When scrolling the page toward the left, place and hold your finger on the left side of the GlideTouch bar.
When scrolling the page toward the right, place and hold your finger on the right side of the GlideTouch bar.
7-EN
Getting Started
SOURCE/
POWER
MUTE
RESET
Setting the Time and Calendar
Rotary encoder
1
2
Press MENU.
Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.
The main SETUP menu is displayed.
3
Select GENERAL by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under GENERAL.
The GENERAL SETUP menu is displayed.
MENU
GlideTouch bar
c
Turning Power On and Off
4
5
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any other button except eject
.
c and
Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.
• The first time power is turned on, the volume will start from level 12.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after installing the CD changer, after changing the car battery, etc.
1
2
Turn off the unit power.
Press RESET with a ball-point pen or similar
pointed object.
8-EN
6
7
8
Select CLOCK ADJUST by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under CLOCK ADJUST.
Select “Year” by sliding your finger on the
GlideTouch bar to the left or right.
Adjust “Year” by turning the Rotary encoder.
Adjust “Month”, “Day”, “Hour” and “Minute” by
turning the Rotary encoder by repeating steps 5
and 6.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder for at least 2
seconds after setting the “hour.” Minutes will reset to 00.
If the display shows over “30” minutes when you do this, the time
will advance to the nearest hour.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Opening and Closing the Movable Display
Adjusting Volume
Press c.
Turn the Rotary encoder until the desired sound is
obtained.
The movable display will open.
• While in the MENU mode, the volume cannot be adjusted.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
To close the movable display, press c again.
The movable display will close.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
• Do not apply shock to the movable display when it is open as it
may result in malfunction of the unit.
• The display may be dim during low temperature and immediately
after turning on the power. The brightness will return to normal as
time elapses.
• The display will stop at the set tilt angle when closing.
Caution
Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Pressing MUTE again will bring the audio back to its
previous level.
Detaching and Attaching the Front Panel
Detaching
1
2
3
Display Tilt Adjustment
Turn off the unit power.
Press
(Release) at the upper left side until the
front panel pops out.
Grasp the left side of the front panel and pull it out.
The movable display may be adjusted to 3 different angles depending
upon user preference.
1
2
3
Press MENU.
Select TILT Adjust by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under TILT Adjust.
Touch
(UP) or
(DOWN) on the GlideTouch
bar to adjust the display angle.
• Selecting
(RETURN) will return to the previous screen.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
Attaching
1
Movable display
2
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Push the left side of the front panel until it locks
firmly into the main unit.
2
4
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• The adjusted tilt angle of the display is stored in memory. There is
no need to re-adjust the tilt angle when the power is turned back on.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit will return to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
Caution
Keep hands (or any other object) away from the display while it is
opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
1
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully. Hold the panel by its sides to avoid
pushing any buttons by mistake.
9-EN
Radio
Manual Storing of Station Presets
1
SOURCE/
POWER
TUNE/
A.ME
2
BAND
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press FUNC. to activate the preset mode.
Source select mode → Preset mode →
Source operation mode → Source select mode
3
g
f
FUNC.
GlideTouch bar
The unit is equipped with IBOC (In Band On Channel) and can
receive HD Radio™ signals (digital terrestrial radio).
Listening to Radio
1
2
The selected station is stored.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
Automatic Memory of Station Presets
Press SOURCE/POWER until a radio frequency
appears in the display.
1
Press BAND repeatedly until the desired radio
band is displayed.
2
FM-1 → FM-2 → AM → FM-1
3
Press TUNE/A.ME to select the tuning mode.
DX (Distance mode) → LOCAL (Local mode) →
MANUAL (Manual mode) → DX
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press g or f to tune in the desired station.
Holding down g or f will change the frequency
continuously.
• The ST indicator appears on the display when a stereo FM station
is tuned in.
• “DIGITAL” is displayed when a digital radio station is received.
• With the DVA-9965, you can tune the radio station using the
GlideTouch bar. Press FUNC. to select the source operation mode.
Press the GlideTouch bar under the desired function shown in the
function guide display.
10-EN
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar for at least 2 seconds under the selected
preset number.
Press BAND repeatedly until the desired radio
band is displayed.
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
2
Press BAND repeatedly until the desired band is
displayed.
Press FUNC. to activate the preset mode.
Source select mode → Preset mode →
Source operation mode → Source select mode
3
Select any one of the preset numbers (1 through 6)
by sliding your finger to the left or right on the
GlideTouch bar. Press the GlideTouch bar
under the selected preset number.
The display shows the band, preset number and
frequency of the station selected.
CD/MP3/WMA
Frequency Search Function
You can search for a radio station by its frequency.
1
2
Press and hold
for at least 2 seconds in Radio
mode to activate Frequency Search mode.
SOURCE/POWER
TITLE
8
-/J
Within 10 seconds, select the desired frequency by
sliding your finger to the left or right on the
GlideTouch bar. Press the GlideTouch bar
under the desired frequency.
The radio station on the frequency selected is received.
• Frequency Search mode is canceled by pressing and holding
at least 2 seconds.
• If either side of the GlideTouch bar is touched and held, the
frequencies are scrolled continuously.
for
g
f
FUNC.
9
GlideTouch bar
c
Playback
1
Press c.
2
Insert a disc with the label side facing up.
The movable display will open.
The disc will be pulled into the unit automatically.
The movable display will close and playback will begin.
When a disc is already inserted, press SOURCE/POWER
to switch to the DISC mode.
The mode will change every time the button is pressed.
DISC → TUNER → CD CHANGER* → DISC
* Only when the CD changer is connected
3
While playing back MP3/WMA, press 8 or 9 to
select the desired folder.
Pressing and holding 8 or 9 will change folders
continuously.
4
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file):
Press g.
Fast backward:
Press and hold g.
Advancing to the beginning of the next track (file):
Press f.
Fast forward:
Press and hold f.
5
To pause playback, press -/J.
6
To eject the disc, press c.
Pressing -/J again will resume playback.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 2 seconds
with the movable display open.
Continued
11-EN
• The CD-player can play discs containing audio data, MP3 data
and WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• If the HDA-5460 model is connected to the unit, some operations
(for example changing the source, selecting the file by holding
buttons up or down, etc.), can be carried out on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• With the DVA-9965, you can return to the beginning of the current
track, fast forward/fast reverse and playback/pause using the
GlideTouch bar. Press FUNC. to select the source operation mode.
Press the GlideTouch bar under the desired function shown in the
function guide display.
MP3/WMA Play Display
The folder number, file number, sampling rate, and bit rate will be
displayed as described below.
File number
Folder number display
display
19
20
Repeat Play
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
2
Press the GlideTouch bar under RPT to select the
RPT mode.
The track (file) will be played back repeatedly.
CD mode:
RPT
↓
RPT
↓
1
(off)*
: Only a track is repeatedly played back
: A disc is repeatedly played back
*1 When a CD changer is connected.
• If REPEAT is set to ON during M.I.X. play in CD changer mode,
M.I.X. will apply to the current disc only.
MP3/WMA mode:
44.1 kHz
Sampling rate display
The sampling rate and the bit
rate (frame display) are
alternately displayed.*
File number display
Folder number display
19
20
192 kbps
Bit rate display
• Press TITLE to switch the display. Please see “Displaying the
Text” (page 28) for information about display switching.
* The recording sampling rate and bit rate of the MP3/WMA file are
displayed. A WMA file of variable bit rate displays the average bit
rate.
12-EN
RPT
↓
RPT
↓
RPT
↓
2
(off)*
: Only a file is repeatedly played back
: Only files in a folder are repeatedly played back
: A disc is repeatedly played back
*2 When an MP3 compatible CD changer is connected.
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
mode, audio files in
• When a file is moved up or down in the RPT
other folders are played back repeatedly.
M.I.X. (Random Play)
Scanning Programs
1
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
2
Press the GlideTouch bar under M.I.X. to select
the Random Play mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
2
The tracks (files) will be played back in random
sequence.
↓
M.I.X.
↓
M.I.X.
↓
(off)*
: The tracks are played back in
random sequence.
*3
: The tracks on all the CDs in the current
magazine will be played back in the
random sequence.
4
*4 When selecting the internal disc mode, RPT
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
Searching from CD Text
1
is illuminated.
• If M.I.X. is set to ON during RPT
(REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
2
MP3/WMA mode:
↓
M.I.X.
↓
(off)*
If the desired song is found, perform steps 1 and 2
to stop scanning.
Tracks can be searched and played by using the CD text on the disc.
In the case of discs and changers that do not support text, searches can
be made by using the track numbers.
*3 When a CD changer equipped with the All M.I.X. function is
connected.
↓
M.I.X.
Press the GlideTouch bar under SCAN to select
the Scan mode.
The first 10 seconds of each of track (file) will be played
back in succession.
3
CD mode:
Press FUNC. to activate the audio function mode.
Press
during play.
This will set the search mode.
Select the desired track by sliding your finger on
the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Text of the
desired Track.
This will play the selected track.
: Only files in a folder are played back in
random sequence.
: Files are played back in random sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played
back in random sequence, and playback
shifts to the next disc.
5
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or the search mode will be canceled when an operation
has not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
• Tracks are skipped continuously by touching and holding either
side of the GlideTouch bar.
File/Folder Name Search (concerning MP3/
WMA)
You can display and search the folder and file name while listening to
the file currently being played back.
*5 When selecting the internal disc mode, RPT
is illuminated.
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
1
2
Press
in MP3/WMA mode.
Within 10 seconds, select the Folder search mode
or File search mode by sliding your finger on the
GlideTouch bar to the left or right.
Press the GlideTouch bar under the desired
search mode.
Folder Name Search mode ↔ File Name Search mode
Folder Name Search mode
The desired folder is searched from all folders in a disc.
File Name Search mode
File is searched from all files in a disc or folder that is selected
by folder search.
Continued
13-EN
Folder Name Search mode
3
Within 10 seconds, select the folder to play back by
sliding your finger on the GlideTouch bar to the
left or right. Press -/J to play the selected folder.
The first file in the selected folder is played back.
To search a file in the selected folder, press the
GlideTouch bar or FUNC. to change to the file search
mode.
Refer to “File Name Search mode” for operation.
• Folder Name Search mode is cancelled by pressing and holding
for at least 2 seconds.
• While in Folder Name Search mode, press
to return to the
selecting search mode.
• “NO FILE” is displayed for 2 seconds if the folder that is selected
by the Folder Name Search mode contains no files.
• “ROOT” is displayed for the root folder that does not have folder
name.
• Folder Name search cannot be made during M.I.X. play.
• Folders are skipped continuously by touching and holding either
side of the GlideTouch bar.
File Name Search mode
3
Within 10 seconds, select the file to play back by
sliding your finger on the GlideTouch bar to the
left or right. Press the GlideTouch bar or FUNC.
to play the selected file.
The selected file is played back.
• File Name Search mode is cancelled by pressing and holding
for at least 2 seconds.
• While in the File Name Search mode, press
to switch to the
previous mode (Folder Search mode or the selecting search mode).
• File Name search cannot be made during M.I.X. play.
• Files are skipped continuously by touching and holding either side
of the GlideTouch bar.
About MP3/WMA
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA data) or distributing, transferring, or copying it, whether for
free or for a fee, without permission of the copyright holder is
strictly prohibited by the Copyright Act and by international treaty.
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint
activity institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the
human ear or masked by other sounds.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio
data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
Method for creating MP3/WMA files
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user's manual for that software.
MP3/WMA files that can be played back by this device have the
file extension “mp3” / “wma”. Files with no extension cannot be
played back. (WMA ver. 7.1, 8 are supported)
Supported playback sampling rates and bit rates
MP3
Sampling rates : 32 kHz - 48 kHz
Bit rates:
32 - 320 kbps
WMA
Sampling rates : 32 kHz - 48 kHz
Bit rates:
32 - 320 kbps
This device may not play back correctly depending on
sampling rates or bit rates.
ID3 tags/WMA tags
If tag data is in an MP3/WMA file, this device can display the
title (track title), artist name, and album name ID3 tag/WMA
tag data.
This device can only display single-byte alphanumeric
characters and the underscore. For non-supported
characters, “NO SUPPORT” is displayed. The number of
characters may be limited, or not correctly displayed,
depending on the tag information.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CDRW (DVD-R) using CD-R writing software. This device can
read up to 1024 files/256 folders (including Root Folders).
Depending on the structure of the folders or files, it may take
time to read a disc. In this case, it is recommended to
decrease the number of folders or files.
Media supported
The media that this device can play back are CD-ROMs, CDRs, and CD-RWs.
14-EN
Corresponding File Systems
Terminology
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all
caps), numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc.,
and other standards that conform to ISO9660. However,
sometimes the file names, folder names, etc., are not
displayed correctly.
Formats supported
This device supports CD-ROM, CD-ROM XA, Mixed Mode
CD, Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Order of files
The unit plays the files in the order that the writing software
writes them. Therefore, the playing order may not be the same
as the order you input. The playback order of the folders and
files is as follows. However, the folder and file playback order
differs from the folder and file number indicated on the
display.
1
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of
44.1 kHz, so the sound is sampled (recorded) 44,100 times per
second. The higher the sampling rate, the higher the sound quality,
but also the larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files
into the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
WMA: WMA tag
Root folder
The root folder is found at the top of the file system. The root folder
contains all folders and files.
2
2
Root Folder
3
4
3
4
5
5
6
6
7
1
Folder
MP3/WMA File
15-EN
DVD/Video CD
Playing DVD/Video CD
Caution
SOURCE/POWER
• Not all functions will be operated for every DVD. See the
individual DVD’s instructions for details on the features
supported.
• Fingerprints on a disc may adversely affect playback. If a
problem occurs, remove the disc and check for fingerprints on
the playback side. Clean the disc if necessary.
• When using the remote control, be careful to press only one
button at a time. Pressing multiple buttons at the same time
may cause erroneous operation.
• If you try to perform an invalid operation (based on the type of
disc being played), the following mark is displayed on the
monitor screen:
-/J
g
f
FUNC.
GlideTouch bar
c
Play Position Memory Function
Even if you turn power off or switch the Ignition Key to OFF during
playback or change the source, playback will continue from the point
where playback stopped when the power is turned ON again.
1
;
RETURN
g
:/J
L
MENU
CLR
DISP/TOP M.
AUDIO
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
8
:
ENT.
9
When a disc is already inserted, press SOURCE/POWER
on the main unit to switch to the DISC mode.
f
number
keys
(0 to 9)
The mode will change every time the button is pressed.
DISC → TUNER → CD CHANGER* → DISC
* Only when the CD changer is connected
ANGLE
SUBTITLE
• DVD and Video CD operation can be controlled from both the
remote control and the main unit. In this section, both remote
control and main unit operation are described.
For GlideTouch bar details, refer to page 20.
• To view DVD and Video CD, the optional TV monitor is required.
• If a PAL type disc is inserted, the message “VIDEO SIGNAL
SYSTEM IS NOT CORRECT” is displayed, and playback is not
available.
2
To eject the disc, press c on the main unit.
• Do not remove a disc during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the disc does not eject, press and hold c for at least 2 seconds.
• The reverse side of a double-sided DVD will not be played
automatically. Remove the disc, turn it over, and reinsert it.
• Never insert map discs for navigation purposes as they could
damage the equipment.
• Refer also to “DVD Setup” (pages 32 to 34).
If a menu screen appears
On DVDs and video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
•
•
This operation is controlled using the remote control unit.
For many discs,the menu screen can also be displayed by pressing
MENU.
DVD menu
Press 8, 9, ; or : to select the desired item, then
press ENT.
• For some discs it is possible to select items directly from the menu
screen using the number keys (“0” to “9”).
Video CD menu
Use the number keys (“0” to “9”) to select the desired
number, then press ENT.
• The menu screen does not appear when the PBC function is turned
off. In this case, set VCD PLAY MODE to turn on the PBC
function. For details, refer to “Setting the Video CD Play Mode”
(page 35).
16-EN
Stopping Playback (PRE-STOP)
Playing Still Frames (pausing)
Press L during playback to stop playback. That position is stored in
memory.
1
2
1
During playback, press L on the remote control
unit.
“PRE-STOP” is displayed.
2
Playback starts from the position at which it was stopped.
Forward/reverse frame-by-frame Playback
1
In the pause mode, press g or f.
2
Press -/J to resume normal playback.
Stopping Playback
During playback, press and hold L for at least 2
seconds.
“STOP” is displayed, and playback stops.
• Pressing L twice also stops playback.
• Playback starts from the beginning when -/ J is pressed while
playback is stopped.
Fast-forwarding/Fast-reversing
Release g or f to return to normal playback.
• No sound is played during fast-forwarding/fast-reversing.
• Fast-forwarding/fast-reversing of only a track being played back
can be made on the Video CD equipped with PBC (play back
control).
• For DVDs and video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
Finding the Beginning of Chapters or Tracks
The picture advances or reverses by one frame each time
the button is pressed.
• No sound is output during forward/reverse frame-by-frame
playback.
• For video CD, reverse frame-by-frame playback is not available.
Slow Motion Playback
1
During playback, press and hold g (fast-reverse)
or f (fast-forward) .
When pressed for more than 1 second, the disc is
forwarded/reversed at double speed.
When held in 5 more seconds, the disc is forwarded/
reversed at 8 times the normal speed.
2
Press -/J to resume playback.
• No sound is played during the still mode.
• The image or sound may stop temporarily when playback starts
from the pause mode. This is not a malfunction.
Press -/J in the PRE-STOP mode.
• For some discs, the position at which playback was stopped may
not be accurate.
1
During playback, press -/J.
When g or f is pressed and held while in the
pause mode, the 1/8th speed slow motion playback
mode is set.
When held in for 5 more seconds, the slow motion speed
switches to 1/2 the normal speed.
2
Release g or f to pause, and press -/J to
playback.
• No sound is played during slow motion playback.
• Slow playback is not available when playing back a slide show.
• 1/2 and 1/8 are approximate speeds. The actual speed differs from
disc to disc.
• For video CD, reverse slow motion playback is not available.
Searching by Title Number (DVD only)
Use this function to easily find positions on the DVD using the
DVD’s title.
• This operation is performed by the remote control unit.
During playback, press g or f.
The chapter/track switches each time the button is pressed,
and playback of the selected chapter/track starts.
f: Press this to start playback from the beginning of
the following chapter or track.
g: Press this to start playback from the beginning of
the current chapter or track.
• Some DVDs do not have chapters.
• The beginning of a track may not be found on the Video CD
equipped with PBC (playback control). Set VCD PLAY MODE to
turn the PBC function off. Refer to “Setting the Video CD Play
Mode” (page 35).
1
2
When playback stops, input the number of the title
you want to play using the number keys (“0” to
“9”).
Press ENT.
Playback starts from the selected title number.
• This function cannot be used on discs on which no title numbers
are recorded.
• Press CLR to delete the last digit in the title number. Press and
hold CLR for at least 2 seconds to clear all title numbers.
• Press RETURN to cancel the title search mode and resume normal
playback.
• The playback starts automatically for two digit title numbers even
if ENT. in procedure 2 is not pressed.
Supplementary explanation
“Chapters” are divisions of movies or musical selections
on DVDs.
“Tracks” are divisions of movies or musical selections on
video and music CDs.
17-EN
Searching Directly by Chapter or Track Number
Switching the Audio Tracks
Use this function to easily move to the beginning of the chapters or
tracks on the disc.
DVDs can have up to 8 different audio tracks. These alternate tracks
can be switched during playback.
• This operation is performed by the remote control unit.
• This operation is performed by the remote control unit.
1
During playback, press AUDIO.
2
During playback or pre-stop, input the chapter or
track number you desire using the number keys
(“0” to “9”).
Press ENT.
Playback starts from the selected chapter or track.
• This function cannot be used on discs on which no chapter
numbers are recorded.
• The beginning of a track number cannot be directly found on the
Video CD equipped with PBC (playback control). Set VCD PLAY
MODE to turn the PBC function off. Refer to “Setting the Video
CD Play Mode” (page 35).
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
• Press CLR to delete the last digit in the chapter/track number.
Press and hold CLR for at least 2 seconds to clear “Chapter” and
“Track” numbers.
• Press RETURN to cancel the chapter/track search mode and
resume normal playback.
The sound switches between the alternate audio tracks
recorded on the disc each time the button is pressed.
• The selected audio track becomes the default setting every time the
power is turned on or the disc is replaced. If a disc does not
include the language you selected for the default audio track, the
disc’s default language is selected instead. Refer to “Setting the
language” (page 32).
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
Video CDs with multiplex audio
During playback, press AUDIO.
The left and right channels will be output as shown in the figure
below, each time the button is pressed.
Chapter/Track/Title Repeat Playback
LR → LL → RR → LR
Use this function to play the disc’s titles, chapters or tracks repeatedly.
1
Switching the Angle (DVD only)
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode 1* →
Audio function mode 2 → Source operation mode →
Source select mode
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
• This operation is performed by the remote control unit.
* DVD mode only.
During playback, press ANGLE.
2
Press the GlideTouch bar under RPT to select the
RPT mode.
The repeat mode switches each time the button is pressed.
DVD
↓
The chapter is played repeatedly.
RPT CHAPT
↓
The title is played repeatedly.
RPT TITLE
↓
The mode returns to normal
playback. (Factory default)
RPT OFF
• By pressing GlideTouch bar under RPT for more than 2 seconds,
the unit will switch to REPEAT OFF.
VIDEO CD
↓
The track is played repeatedly.
RPT TRACK
↓
RPT DISC
↓
RPT OFF
*
The entire disc is played repeatedly.
(Factory default)
Playback does not repeat.
* Displayed only in the changer mode.
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). Set VCD PLAY MODE to turn the PBC
function off. Refer to “Setting the Video CD Play Mode” (page 35).
• For some discs it is not possible to switch the repeat mode.
18-EN
The angle switches between the angles recorded on the disc
each time the button is pressed.
•
•
Some time may be required for the angle to change.
Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
Switching the Subtitles (subtitle language)
(DVD only)
With multiple subtitle language DVDs, the subtitle language can be
switched during playback, or subtitles can be hidden.
• This operation is performed by the remote control unit.
Displaying the Disc Status (Video CD only)
Use the procedure described below to obtain an on-screen display of
the status (track number, etc.) of the currently playing video CD on
the monitor screen.
• This operation is performed by the remote control unit.
During playback, press SUBTITLE.
During playback, press DISP/TOP M.
The subtitle switches between the languages recorded on the
disc and OFF each time the button is pressed.
The playback status is displayed.
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD’s menu.
• The selected subtitle language becomes the default setting every
time the power is turned on or the disc is replaced. If a disc does
not include that language, the disc’s default language is selected
instead. Refer to “Setting the language” (page 32).
• For some discs, the subtitles will be displayed even when this is set
to off.
Tips
Switching from the disc menu.
For some discs, the audio language, angle and subtitles can be
switched from the disc menu.
• This operation is performed by the remote control unit.
The playback status display closes when DISP/TOP M. is
pressed again.
Playback disc
Current track
number
Playback status
Repeat setting
(Default setting REPEAT DISC)
TV system
(NTSC or PAL)
V I DEO – CD
1
N T SC
1 2 ' 3 4 "
Track playback
time
P L A Y
R E P E A T D I S C
P B C
O F F
Playback control
(PBC)
• When PBC is set to ON, the current track number and track
playback time is not displayed.
1 Press MENU, select the item, then press ENT.
2 Press 8, 9, ; or : to select the language or angle,
then press ENT.
(For some discs, they can be selected using the
number keys “0” to “9” while the language or the angle
menu is displayed.)
Displaying the Disc Status (DVD only)
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD on the monitor
screen.
• This operation is performed by the remote control unit.
During playback, press DISP/TOP M.
The playback status is displayed.
The playback status display closes when DISP/TOP M. is
pressed again.
Current chapter
number
Playback disc
Current title
number
Playback status
Repeat setting
(Default setting REPEAT OFF)
Current audio
language/number
Current subtitle
language/number
TV system
(NTSC or PAL)
DVD – V I DEO N T SC
1
1 : 2 3 ' 4 5 "
1 8
P L A Y
R E P E A T
A U D I O : E
D
S U B T . : J
A N G L E : 1
O
N
O
P
/
F F
G 1 / 4
L B Y D 3 / 2 . 1
N 1 / 2
3
Chapter
playback time
Current audio
signal output
Current angle
number
19-EN
Sound Setting
GlideTouch bar Operation
The GlideTouch bar controls the same functions as the unit buttons
and remote control.
1
SOURCE/
POWER
Press FUNC. then select the desired mode.
BAND
Rotary encoder (MODE)
Source select mode →
Audio function mode 1* (;, :, ENT., etc.) →
Audio function mode 2 (AUDIO, RPT, etc.) →
Source operation mode (g, f , etc.) →
Source select mode
* DVD mode only.
2
3
The function guide of the selected mode is
displayed.
g MENU
f
FUNC.
GlideTouch bar
Press the position on the GlideTouch bar which
corresponds to the function guide in the display.
Adjusting Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat
Source Operation Mode
<DVD/Video CD mode>
L
L
(/)
g/f
:
J
g/f
(/)
Stopping Playback (PRE-STOP)
Stopping Playback
Fast-forward/Fast-reverse
Find the Beginning of Chapters or Tracks
Playback
Still (pause)
Forward/Reverse frame-by-frame playback
Slow Motion Playback
pgae17
page17
page17
page17
page17
page17
page17
page17
1
Each press changes the mode as follows:
SUBWOOFER*1 → BALANCE → FADER → DEFEAT →
VOLUME → SUBWOOFER*1
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
Audio Function Mode
Press g or f after selecting the Subwoofer mode,
and the subwoofer output phase is switched NORMAL
(PHASE 0°) or REVERS (PHASE 180°).
<DVD mode>
;/:/8/9/
ENT.
Selection button when the menu display is
indicated.
RTN
Return to the previous display
(Depending on the disc, it may not be possible to
page16
return to the previous display.)
C
FUNC.
B
TOP.M
MENU
AUDIO
SUBT.
ANGLE
RPT
Press FUNC. to change.
Recall the top menu display
Recall the menu display
Switching the Audio Tracks
Switching the Subtitles
Change the angle
Chapter/Title repeat playback
20-EN
• If the Rotary encoder (MODE) is not pressed within 5 seconds
after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER
mode, the unit automatically returns to normal mode.
• If you set the 2WAY/3WAY switch (pages 68, 69 and 71) to 3WAY,
you cannot adjust the FADER mode.
*1 When the subwoofer mode is set to OFF, its level and phase cannot
be adjusted.
page16
page16
page18
page19
page18
page18
<Video CD mode>
AUDIO
RPT
PBC
RTN
Press the Rotary encoder (MODE) repeatedly to
choose the desired mode.
Change audio output
page18
Chapter/Track repeat playback
page18
Set Video CD playback mode
page35
Return to the previous display
(Depending on the disc, it may not be possible to
return to the previous display.)
2
Turn the Rotary encoder (MODE) until the
desired sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of EQ
will return to the factory defaults and MX is turned off.
• If an external audio processor is connected, refer to “External
Audio Processor (Optional)” (pages 45 to 53)
Selecting the EQ mode (Factory settings)
1
2
3
Press MENU.
Select the Factory’s EQ mode by sliding your finger
on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Factory’s EQ
mode.
Select the desired equalizer characteristic by
sliding your finger on the GlideTouch bar to the
left or right.
• By selecting USER’S 1 to 6, you can recall the stored preset
number in “Adjusting and Storing the Graphic Equalizer Curve.”
(page 22) or “Adjusting and Storing the Parametric Equalizer
Curve” (this page).
4
Press and hold MENU for at least 2 seconds to
return to normal mode.
• This function is inoperable when DEFEAT is set to ON (page 20).
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Setting User's EQ mode
This setting gives you a choice of 9-band parametric, or 9-band
graphic equalizer.
1
2
Press MENU.
Adjusting and Storing the Parametric
Equalizer Curve
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
To adjust the parametric equalizer curve, set the EQ mode to P.EQ.
For details, refer to “Setting User's EQ mode” (this page).
1
2
3
4
5
6
7
8
9
Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.
Select AUDIO by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under AUDIO.
The AUDIO SETUP menu is displayed.
4
5
Select EQ MODE by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under EQ MODE.
Select the Parametric EQ mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Parametric
EQ mode.
Press BAND to select the band to be adjusted.
BAND1 → BAND2 →... BAND9 → BAND1
The main SETUP menu is displayed.
3
Press and hold MENU for at least 2 seconds.
10
Select the frequency by sliding your finger on the
GlideTouch bar to the left or right.
Adjust the level by turning the Rotary encoder.
Adjustable level: ±7step (1step:1.3 dB)
Press SOURCE/POWER to set the band width (Q).
To adjust another band, repeat steps 3 to 6 and
adjust all bands.
When the setting has been completed, press
FUNC. or the GlideTouch bar to activate the
preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar under the desired preset for at least 2 seconds.
The adjustments are saved in the selected preset.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• This function is inoperable when DEFEAT is set to ON (page 20).
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Select EQ Type by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under P.EQ or G.EQ.
P.EQ : 9-band parametric EQ (initial setting)
G.EQ: 9-band graphic EQ
6
Press and hold MENU for at least 2 seconds to
return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
21-EN
Adjusting and Storing the Graphic Equalizer
Curve
You can modify the equalizer settings to create a response curve more
appealing to your personal taste. To adjust the graphic equalizer
curve, set the EQ mode to G.EQ. For details, refer to “Setting User’s
EQ mode” (page 21).
1
2
3
Press and hold MENU for at least 2 seconds.
Select the Graphic EQ mode by sliding your finger
on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Graphic EQ
mode.
Recalling the Stored Equalizer Curve
1
2
3
4
Press BAND to select the band to be adjusted.
BAND1 → BAND2 →... BAND9 → BAND1
4
5
6
7
8
Adjust the level by turning the Rotary encoder.
Adjustable output level: ±7step (1step:1.3 dB)
To adjust another band, repeat steps 3 and 4, then
adjust all bands.
When the setting has been completed, press
FUNC. or the GlideTouch bar to activate the
preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar under the desired preset for at least 2 seconds.
The adjustments are saved in the selected preset.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• This function is inoperable when DEFEAT is set to ON (page 20).
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
22-EN
5
Press and hold MENU for at least 2 seconds.
Select the Parametric EQ or Graphic EQ mode by
sliding your finger on the GlideTouch bar to the
left or right. Press the GlideTouch bar under the
Parametric EQ or Graphic EQ mode.
Press FUNC. or the GlideTouch bar to activate
the preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar under
the desired preset. The previously stored
adjustments are recalled.
Press and hold MENU for at least 2 seconds to
return to normal mode.
• This function is inoperable when DEFEAT is set to ON (page 20).
• You can recall the adjusted equalizer curve from “Selecting the EQ
mode (Factory settings)” (page 21).
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Low range
About the Crossover
Mid range
High range
Crossover:
This unit is equipped with an active crossover. The crossover limits the
frequencies delivered to the outputs. Each channel is controlled
independently. Thus, each speaker pair can be driven by the frequencies for
which they have been optimally designed.
The crossover adjusts the HPF (high pass filter) or LPF (low pass filter) of
each band, and also the slope (how fast the filter rolls off the highs or lows).
Adjustments should be made according to the reproduction characteristics
of the speakers. Depending on the speakers, a passive network may not be
necessary. If you are unsure about this point, please consult your authorized
Alpine dealer.
(Different from actual display)
Level adjusting
(0 to - 12 dB)
Output frequency range
Slope FLAT
2 way mode
Slope adjusting
Cut-off frequency
(1/3 octave steps)
HPF
LPF
Low range
speaker
Slope
Level
HPF
LPF
----
20 Hz 200 Hz
----
FLAT, 6,
12, 18,
24 dB/oct
0 to
−12 dB
Rear high
range
speaker
20 Hz 200 Hz
----
FLAT, 6,
12, 18,
24 dB/oct
----
0 to
−12 dB
Front high
range
speaker
20 Hz 200 Hz
----
FLAT, 6,
12, 18,
24 dB/oct
----
0 to
−12 dB
Low range
High range
20 Hz
HPF cut-off
frequency
(Different from actual display)
LPF cut-off
frequency
• HPF (high pass filter): Cuts the lower frequencies and allows the
higher frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the
lower frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one
octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to FLAT to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency,
as it may cause damage to the speaker due to the low frequency
content.
• You cannot adjust the crossover frequency higher than the HPF or
lower than the LPF.
• Use the recommended crossover frequencies of the speakers being
used for setting the crossover. Adjusting to a frequency outside that
recommended range might cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers,
refer to the respective Owner's Manual.
Alpine is not responsible for damage or malfunction of speakers
caused by improper crossover settings.
(Different from actual display)
3 way mode
Cut-off frequency
(1/3 octave steps)
Slope
Level
HPF
LPF
HPF
LPF
Low range
speaker
----
20 Hz 200 Hz
----
FLAT, 6,
12, 18,
24 dB/oct
0 to
− 12 dB
Mid range
speaker
20 Hz 200 Hz
1 kHz 20 kHz
FLAT, 6,
12, 18,
24 dB/oct
FLAT, 6,
12, 18,
24 dB/oct
0 to
−12 dB
High range
speaker
1 kHz 20 kHz
----
FLAT*1
6, 12, 18,
24 dB/oct
----
0 to
−12 dB
*1 Only when selecting USER'S in “Setting the Response Slope for
the High Range Speaker” (page 37).
23-EN
Adjusting and Storing the Crossover
Settings
Before performing the following procedures, refer to “About the
Crossover” (page 23).
1
2
3 WAY System
3
LOW → MID-L → MID-H → HIGH → LOW
4
Press and hold MENU for at least 2 seconds.
Select the Crossover mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the Crossover mode.
Press BAND to select the band to be adjusted.
5
SUBW → REAR → FRONT → SUBW
4
6
Press SOURCE/POWER to adjust the slope.
Adjustable slope: FLAT, 6dB/oct., 12dB/oct.,18dB/oct.,
24dB/oct.
Adjust the output level by turning the Rotary
encoder.
6
8
9
10
To adjust another band, repeat steps 3 to 6, then
adjust all bands.
When the setting has been completed, press
FUNC. or the GlideTouch bar to activate the
preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar under the desired preset for at least 2 seconds.
The adjustments are saved in the selected preset.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Adjustable slope: FLAT*, 6dB/oct., 12dB/oct.,18dB/oct.,
24dB/oct.
Adjust the output level by turning the Rotary
encoder.
Adjustable output level: -12 to 0 dB.
Adjustable output level: -12 to 0 dB.
7
Press SOURCE/POWER to adjust the slope.
* FLAT can be set for the HIGH slope only when USER'S
is selected in “Setting the Response Slope for the High
Range Speaker” (page 37). Depending on the response
characteristics of the speaker, care should be taken
when setting the response slope to FLAT, as speaker
damage may result. With the DVA-9965, a message is
displayed when the response slope for the high range
speaker is set to FLAT. After the message is displayed,
press the Rotary encoder to set to FLAT.
Select the desired cut-off frequency (Crossover
Point) by sliding your finger on the GlideTouch
bar to the left or right.
Adjustable frequency bands: 20Hz to 200Hz
(in 1/3 octave steps)
5
Select the desired cut-off frequency (Crossover
Point) by sliding your finger on the GlideTouch
bar to the left or right.
Adjustable frequency bands:
LOW: 20Hz to 200Hz (in 1/3 octave steps)
MID-L: 20Hz to 200Hz (in 1/3 octave steps)
MID-H: 1 kHz to 20 kHz (in 1/3 octave steps)
HIGH: 1 kHz to 20 kHz (in 1/3 octave steps)
2 WAY System
3
Press BAND to select the band to be adjusted.
7
8
9
10
To adjust another band, repeat steps 3 to 6, then
adjust all bands.
When the setting has been completed, press
FUNC. or the GlideTouch bar to activate the
preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar under the desired preset for at least 2 seconds.
The adjustments are saved in the selected preset.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
• About the 2way/3way system
You can switch to 2way/3way system mode with the 2way/3way
switch on the bottom side of the unit (pages 68, 69 and 71).
3WAY
F/R/Sub-W
24-EN
When setting to “3 WAY”:
The unit can be operated in a 3 way system.
When setting to “F/R/Sub-W”:
The unit can be operated in a 2 way system.
Recalling the Stored Crossover Settings
1
2
3
4
5
Here we calculate the time correction value for the front left
speaker in the diagram on the above.
Conditions:
Farthest Speaker – listening position : 2.25 m (88-9/16")
Front left speaker – listening position : 0.5 m (19-11/16")
Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")
Time correction = 1.75 ÷ 343*1 × 1000 = 5.1 (ms)
Press and hold MENU for at least 2 seconds.
Select the Crossover mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the Crossover mode.
Press FUNC. or the GlideTouch bar to activate
the preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar under
the desired preset to recall the stored contents.
Press and hold MENU for at least 2 seconds to
return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
*1 Speed of sound: 343 m/s (765 mph) at 20˚C
In other words, giving the front left speaker a time correction
value of 5.1 ms makes it seem as if its distance from the
listener is the same as the distance to the farthest speaker.
Time correction eliminates the differences in the time required
for the sound to reach the listening position.
The time of the front left speaker is corrected by 5.1 ms so that
its sound reaches the listening position at the same time as the
sound of other speakers.
Example 2. Listening Position: All Seats
Adjust the time correction level of each speaker to almost the same
level.
1
About Time Correction
The distance between the listener and the speakers in a car vary
widely due to the complex speaker placement. This difference in the
distances from the speakers to the listener creates a shift in the sounds
image and frequency characteristics. This is caused by the time delay
between the sound reaching the listener’s right versus the left ear.
To correct this, the DVA-9965 is able to delay the audio signal to the
speakers closest to the listener. This effectively creates a perception of
increased distance for those speakers. The listener can be placed at an
equal distance between the left and right speakers for optimum
staging.
The adjustment will be made for each speaker in 0.1 ms steps.
2
Sit in the listening position (driver’s seat, etc.) and
measure the distance (in meters) between your
head and the various speakers.
Calculate the difference between the distance to
the farthest speaker and the other speakers.
L = (distance to farthest speaker) – (distance to other
speakers)
3
Divide the distances calculated for the speakers by
the speed of sound (343 m/s (765 mph) at 20˚C).
These values are the time correction values for the
different speakers.
continued
Example 1. Listening Position: Front Left Seat
Adjust the time correction level of the front left speaker
to a high value and the rear right to zero or a low value.
5.1ms
0.5m
2.25m
The sound is not balanced because the distance between the
listening position and the various speakers is different.
The difference in distance between the front left speaker and
the rear right speaker is 1.75 m (68-7/8").
25-EN
Time Difference Table
Delay
Number
Time
Difference Distance
(cm)
(ms)
Setting the Time Correction Unit
Distance
(inch)
Delay
Number
Time
Difference Distance
(cm)
(ms)
Distance
(inch)
You can change the unit (ms, cm or inch) of time correction.
1
2
Press MENU.
0
0.0
0.0
0.0
51
5.1
173.4
68.3
1
0.1
3.4
1.3
52
5.2
176.8
69.7
2
0.2
6.8
2.7
53
5.3
180.2
71.0
3
0.3
10.2
4.0
54
5.4
183.6
72.4
4
0.4
13.6
5.4
55
5.5
187.0
73.7
Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.
5
0.5
17.0
6.7
56
5.6
190.4
75.0
The main SETUP menu is displayed.
6
0.6
20.4
8.0
57
5.7
193.8
76.4
7
0.7
23.8
9.4
58
5.8
197.2
77.7
8
0.8
27.2
10.7
59
5.9
200.6
79.1
3
9
0.9
30.6
12.1
60
6.0
204.0
80.4
Select DISP by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under DISP.
10
1.0
34.0
13.4
61
6.1
207.4
81.7
The DISPLAY SETUP menu is displayed.
11
1.1
37.4
14.7
62
6.2
210.8
83.1
12
1.2
40.8
16.1
63
6.3
214.2
84.4
13
1.3
44.2
17.4
64
6.4
217.6
85.8
14
1.4
47.6
18.8
65
6.5
221.0
87.1
15
1.5
51.0
20.1
66
6.6
224.4
88.4
16
1.6
54.4
21.4
67
6.7
227.8
89.8
17
1.7
57.8
22.8
68
6.8
231.2
91.1
18
1.8
61.2
24.1
69
6.9
234.6
92.5
19
1.9
64.6
25.5
70
7.0
238.0
93.8
20
2.0
68.0
26.8
71
7.1
241.4
95.1
21
2.1
71.4
28.1
72
7.2
244.8
96.5
22
2.2
74.8
29.5
73
7.3
248.2
97.8
23
2.3
78.2
30.8
74
7.4
251.6
99.2
24
2.4
81.6
32.2
75
7.5
255.0
100.5
25
2.5
85.0
33.5
76
7.6
258.4
101.8
26
2.6
88.4
34.8
77
7.7
261.8
103.2
27
2.7
91.8
36.2
78
7.8
265.2
104.5
28
2.8
95.2
37.5
79
7.9
268.6
105.9
29
2.9
98.6
38.9
80
8.0
272.0
107.2
30
3.0
102.0
40.2
81
8.1
275.4
108.5
31
3.1
105.4
41.5
82
8.2
278.8
109.9
32
3.2
108.8
42.9
83
8.3
282.2
111.2
33
3.3
112.2
44.2
84
8.4
285.6
112.6
34
3.4
115.6
45.6
85
8.5
289.0
113.9
35
3.5
119.0
46.9
86
8.6
292.4
115.2
36
3.6
122.4
48.2
87
8.7
295.8
116.6
37
3.7
125.8
49.6
88
8.8
299.2
117.9
38
3.8
129.2
50.9
89
8.9
302.6
119.3
39
3.9
132.6
52.3
90
9.0
306.0
120.6
40
4.0
136.0
53.6
91
9.1
309.4
121.9
41
4.1
139.4
54.9
92
9.2
312.8
123.3
42
4.2
142.8
56.3
93
9.3
316.2
124.6
43
4.3
146.2
57.6
94
9.4
319.6
126.0
44
4.4
149.6
59.0
95
9.5
323.0
127.3
45
4.5
153.0
60.3
96
9.6
326.4
128.6
46
4.6
156.4
61.6
97
9.7
329.8
130.0
47
4.7
159.8
63.0
98
9.8
333.2
131.3
48
4.8
163.2
64.3
99
9.9
336.6
132.7
49
4.9
166.6
65.7
50
5.0
170.0
67.0
26-EN
4
5
6
Select T.CORR by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under T.CORR.
Select (ms), (cm) or (inch) by sliding your finger on
the GlideTouch bar to the left or right. Press
under (ms), (cm) or (inch) on the GlideTouch bar.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Adjusting and Storing the Time Correction
Before performing the following procedures, refer to “About Time
Correction” (page 25).
1
2
3
Press and hold MENU for at least 2 seconds.
Select Time Correction mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under Time Correction.
Press BAND to select a speaker to be adjusted.
F-L → F-R → R-L → R-R → SW-L → SW-R → F-L
4
5
6
Adjust the time difference (0.0 to 9.9 ms) or
distance by sliding your finger on the GlideTouch
bar to the left or right. Or turn the Rotary
encoder to adjust the time difference.
Repeat steps 3 and 4 to set another speaker.
When the setting has been completed, press
FUNC. or the GlideTouch bar to activate the
preset mode.
7
8
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar under the desired preset for at least 2 seconds.
The adjustments are saved in the selected preset.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for seconds, the unit will return to the
normal mode.
Recalling the Stored Time Correction
Settings
1
2
3
4
5
Press and hold MENU for at least 2 seconds.
Select the Time Correction mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Time
Correction mode.
Press FUNC. or the GlideTouch bar to activate
the preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar under
the desired preset to recall the stored contents.
Press and hold MENU for at least 2 seconds to
return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, and MP3, will be
able to reproduce the music clearly even in cars with a lot of road noise.
1
2
3
4
5
6
Press MENU.
Select the Media Xpander mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Media
Xpander mode.
Press the GlideTouch bar under ON to activate
MX.
7
8
Select the Media Xpander mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Media
Xpander mode.
Select the MX Level by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired level or OFF
(Non Effect).
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and
produces well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback.
MX takes advantage of this large data quantity to reproduce a
more clear, clean output.
CMPM/SAT (MX level 1 to 3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close to
the original.
DVD (Video CD)
(MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as
music clip. MX uses this data to reproduce the sound
accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that
corresponds to the media connected.
If two external devices are connected, a different MX
mode for each media can be selected.
9
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• To cancel MX mode for all music sources, set MX to OFF in step 3.
• Each music source, such as FM radio, CD, and MP3/WMA can
have its own MX setting.
• On discs with both MP3/WMA and CD-DA, when the source
changes from “MP3/WMA to CD-DA” or “CD-DA to MP3/
WMA”, MX-mode switching may delay playback slightly.
• Setting to MX OFF sets MX mode of each music source to OFF.
• This function is inoperable when DEFEAT is set to ON.
• There is no MX mode for AM radio.
• If an audio processor with the MX function (PXA-H701, etc.) is
connected, its own MX processing is applied to the music source.
Since the processor MX settings may not match the head unit, the
audio processor needs to be adjusted. For details, refer to the
Owner’s Manual of the audio processor.
• “CMPM” is applied for MP3/WMA, WAV and iPod.
• “SAT” is applied for XM radio and SIRIUS radio.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
Press SOURCE/POWER to select the source to
which you want to apply MX (Media Xpander).
Press and hold MENU for at least 2 seconds.
27-EN
The display in MP3/WMA mode:
Other Functions
FOLDER NO./FILE NO./
ELAPSED TIME
FOLDER NAME*2
SOURCE/
POWER
TITLE
→
FOLDER NO./FILE NO./
ELAPSED TIME
ARTIST NAME/ALBUM NAME*3
FILE NAME
TRACK NAME*3
FOLDER NO./FILE NO./
ELAPSED TIME
FOLDER NO./FILE NO./
ELAPSED TIME
→
Rotary encoder
TRACK NAME*3
→
Sound dependent display
→
CALENDAR/CLOCK
FOLDER NO./FILE NO./
ELAPSED TIME
FOLDER NAME*2
MENU
FUNC.
FILE NAME
GlideTouch bar
The display in DVD mode:
Displaying the Text
Chapter No./ Playback elapsed time
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name, and the tag, etc., while playing
MP3/WMA files.
DVD VIDEO
Chapter No./ Playback elapsed time
→
DVD VIDEO
→
CALENDAR/CLOCK
Chapter No./ Playback elapsed time
Sound dependent display
Chapter No./ Playback elapsed time
→
DVD VIDEO
Press TITLE.
The display will change every time the button is pressed.
The display in Radio mode:
The display in Video CD mode:
PRESET No./FREQUENCY
PRESET No./FREQUENCY
→
→
Track No./ Playback elapsed time
VIDEO CD
Track No./ Playback elapsed time
→
CALENDAR/CLOCK
PRESET No./FREQUENCY
RADIO STATION NAME*6
*5
→
PRESET No./FREQUENCY
RADIO STATION NAME*6
VIDEO CD
→
CALENDAR/CLOCK
*5
→
Track No./ Playback elapsed time
Sound dependent display
Track No./ Playback elapsed time
→
VIDEO CD
CALENDAR/CLOCK
PRESET No./FREQUENCY
TITLE NAME*7
*5
→
PRESET No./FREQUENCY
Sound dependent display
→
ARTIST NAME*4
PRESET No./FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME
TRACK NO./ELAPSED TIME
TEXT (DISC NAME/Performer)*1
TEXT (TRACK NAME)*1
CALENDAR/CLOCK
TRACK NO./ELAPSED TIME
TRACK NO./ELAPSED TIME
Sound dependent display
→
→
→
TEXT (DISC NAME/Performer)*1
TEXT (TRACK NAME)*1
28-EN
*1 Displayed during playback of a disc with CD Text.
“NO TEXT” will be displayed when the CD contains no Text data.
*2 “ROOT” is displayed for a root folder that does not have a folder
name.
*3 ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, the
ID3 tag/WMA tag information is displayed (e.g., track name, artist
name, and album name). All other tag data is ignored.
“NO DATA” will be displayed when an MP3/WMA file contains no
ID3 tag/WMA tag information.
*4 Displays artist in the main program Service Data.
5
* Displayed when a digital radio station is received.
*6 Displays Short Station Name in the Station Information Service
Data.
*7 Displays title in the main program Service Data.
About “Text”
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• When the Scroll Setting (page 38) is set to “MANUAL,” press and
hold TITLE for at least 2 seconds to scroll the Text information
only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE
NAME DISPLAY or TAG DISPLAY mode).
• “NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
• When external audio is interrupted (INTERRUPT is displayed), the
time can be displayed by pressing TITLE.
6
7
Press FUNC. or the GlideTouch bar to execute.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
* You can also use other colors if they have already been stored in
the USER’S presets described below.
If you want to use colors other than the above
1
2
3
Press MENU.
Select the Multicolor Illumi. mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multicolor
Illumi. mode.
Turn the Rotary encoder to select colors
(1 through 512).
Each press of BAND advances the color number by 30.
Displaying Time
1..............19..............184..............363..............512
(Red)
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 28).
4
Blackout Mode On and Off
When Blackout mode is turned on, the display will turn off to reduce
power consumption. This additional power enhances the sound quality.
Press and hold FUNC. for at least 2 seconds to
activate the blackout mode.
To cancel Blackout mode, press and hold FUNC. for at least 2
seconds.
Setting the Multicolor Illumination
You can change the lighting color of the following four buttons :
SOURCE/POWER, BAND, g and f.
1
2
3
Press MENU.
Select the Multicolor Illumi. mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multicolor
Illumi. mode.
Change the color by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired color.
BLUE ↔ GREEN ↔ AMBER ↔ RED ↔ (USER1-6*)
4
5
Press SOURCE/POWER to change to the 2 lit
Illumination mode.
Touch the GlideTouch bar, and select the lighting
color for the whole unit by sliding it to the left or
right.
AMBER ↔ GREEN ↔ AUTO
• AUTO: As you change the color of the illuminated buttons, their
color switches between AMBER and GREEN.
(Green)
(Blue)
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar under
the desired preset to store the adjustment.
To recall the stored color setting
Select USER'S 1 through 6 in “Setting the Multicolor
Illumination” step 3.
The stored setting contents are recalled.
5
The display will turn off.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.
(Amber)
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Rear DVD Function
1
2
3
4
Select the desired audio source.
Press MENU.
Select Rear DVD by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Rear DVD.
Select ON or OFF by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under ON or OFF.
If ON is set:
You can enjoy the picture and background of an inserted
disc on the front or rear monitor while listening to an
alternate audio source, such as the radio, on this unit.
The Rear DVD function setting determines which remote
control sensor is recognized. When remote control
operation is disabled, operation from the head unit
controls is still possible.
Continued
29-EN
Confirm this in the following table.
SOURCE
REAR
Remote Input is
Remote
Operation
DVD
connected*1 or
control with
by the unit
ON/
remote control
the unit’s
buttons
OFF
with optional
built-in
remote control
sensor
setting
i-Personalize™ Data
Download Operation
eye (KRE-500E).
Built-in
ON
DISC
Remote control
Inoperable
Unit buttons
of built-in disc
control of
mode
built-in disc
SOURCE/POWER
mode
OFF
Built-in
ON
TUNER
OFF
Ai-NET
ON
Inoperable*2
Remote control
Remote
Unit buttons
control of
control of
built-in disc
built-in disc
mode
mode
Inoperable
Unit buttons
of built-in disc
control
mode
Tuner mode
Inoperable*
2
Remote control
Remote
control
Tuner mode
Tuner mode
Remote
Changer or
of built-in disc
control of
SAT Radio
mode
Changer or
SAT radio,
etc.
etc.
OFF
Inoperable*2
Remote
Remote
control of
control of
Changer or
Changer or
SAT radio,
SAT radio,
etc.
etc.
*1 Use the remote control sensor of the connected monitor.
*2 If an Alpine touch panel compatible monitor (monitor control lead
connected) is connected and touch operation can be performed.
5
GlideTouch bar
Unit buttons
control of
Inoperable
MENU
About i-Personalize™ Data Download
You can download data (from Alpine’s website) to a CD-R, and
download and store the data to the DVA-9965.
To start i-Personalize, access the URL below and follow the on-screen
instructions.
http://www.alpine.com or http://www.alpine-usa.com
Downloadable data
Parametric
equalizer or
Graphic equalizer
Time correction
Crossover
Press and hold MENU for at least 2 seconds to
return to normal mode.
• The volume of any add-on displays (rear monitor, etc.) cannot be
adjusted from the DVA-9965.
Adjust the volume on the display itself. In addition, its sound
cannot be muted.
• The function for external interruption of the sound of the rear
monitor (from the navigation system, for example) cannot be used
when the rear DVD function setting is turned on.
• If you are listening to the AM radio while the rear DVD function is
set to ON, noises may be heard from the radio, but this is not a
malfunction.
Profile
Calendar message
Data is memorized in Preset 6 of the
Parametric EQ mode or Graphic EQ
mode.
Data is memorized in Preset 6 of the
Time Correction mode.
Data is memorized in Preset 6 of the
crossover mode.
Data is set to the opening display.
Data is set to the calendar message.
The file name of download data shall be
“A_U∗∗∗∗∗.MP3.”
A_U∗∗∗∗∗.MP3
Extender (fixed)
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
• For downloading procedure details, see Alpine’s website.
• If the HDA-5460 model is connected to this unit, the HDA-5460
hard disc can be used. Data that has been stored in the hard disc is
downloaded by the “Data Downloading” operation to DVA-9965.
For details on how to download data to the hard disc, refer to the
Owner’s Manual of the HDA-5460 model.
• If an external audio processor is connected, data that is
downloaded cannot be used.
30-EN
Data Downloading
Downloading the Wallpaper
1
A data file downloaded from the Alpine Owner’s website is written to
a CD-R/CD-RW disc, and automatically uploaded when the disc is
inserted into the DVA-9965.
The wallpaper file can be saved and displayed as long as a disc is not
inserted, or while playing a CD/MP3/WMA audio, or if a DVD disc is
stopped.
2
3
4
Insert the CD-R disc containing the data.
If the source is not the DISC mode, press
SOURCE/POWER to change to DISC mode.
Press MENU.
Select the Data Download mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Data
Download mode.
• If several files are stored in a disc, only the first file will be stored
on the unit.
Select Download by pressing the GlideTouch bar
under Download.
• Up to 2 files can be stored on this unit. If a third file is
downloaded, the first file is overwritten and new one memorized.
• To change the wallpaper, press and hold ENT. on the remote
control unit for at least 2 seconds while disc is not inserted, or
while PRE-STOP or STOP is set in disc mode.
• Even if the battery power cable is removed, the downloaded data is
not cleared.
Data search of the disc starts and the first file name is
displayed.
• If you want to cancel the data search, press the GlideTouch bar
under CANCEL.
• If a file is not found by a data search, “NO FILE” is indicated.
• The “NO FILE” display will automatically disappear if no
operation is performed for 5 seconds.
5
Insert a CD-R/CD-RW disc containing data.
After sensing the disc, the data file is updated.
Select the file to download by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the desired file.
Data downloading starts.
6
When data download is finished successfully, the
confirmation screen is displayed, and download
finishes.
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
PARAMETRIC EQ or GRAPHIC EQ data*
The data is memorized in Preset 6 of Parametric EQ mode or
Graphic EQ mode. The memorized data settings in Preset 6
(Parametric EQ mode or Graphic EQ mode) are automatically
applied.
X-OVER (Crossover) data
The data is memorized in Preset 6 of X-OVER mode. The
memorized data settings in Preset 6 (X-OVER mode) are
automatically applied.
You cannot download the data if the setting of the 2WAY/3WAY
switch is not suitable for the data.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction
mode. The memorized data settings in Preset 6 (Time
Correction mode) are automatically applied.
* If the downloaded parametric EQ or graphic EQ differs from
the current EQ mode, Preset 6 setting will not change
automatically. Change the EQ mode and recall Preset 6.
* If data is downloaded while setting DEFEAT to ON, Preset 6
setting will not change automatically. Recall Preset 6 in the EQ
mode.
7
Press and hold MENU for at least 2 seconds to
return to normal mode.
• When you download the data again, the data is overwritten in
Preset 6.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
31-EN
Setting the language
DVD Setup
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (Not all discs
allow changing the default language. If not, the factory default
language applies.)
8
;
:
ENT.
9
RETURN
number
keys
(0 to 9)
L
CLR
Setting item: LANGUAGES
Further setting items: AUDIO / SUBTITLE / MENU
AUDIO:
Set the audio track language.
SUBTITLE:
Set the language of the
subtitles displayed on the
screen.
MENU:
Set the language used for the
menus (title menu, etc.).
S E T UP
L A N G U A G E S
A U D I O
A U T O
S U B T I T L E
A U T O
M E N U
A U T O
Setting contents:
AUTO ∗1 / ENGLISH / JAPANESE / GERMAN / SPANISH /
FRENCH / ITALIAN / PORTUGUESE / RUSSIAN / CHINESE /
OTHER ∗2
SETUP
Press 8,9, ; or : to select your desired language, then press
ENT.
DVD Setup Operation
• DVD Setup Operation is performed by the remote control unit.
The following 4 steps are common to each of the DVD settings.
Refer to the specific section for details.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
S E T UP
L
T
C
P
D
C
2
A
V
O
A
I
U
N G
S
U N
R E
G I
S T
U
C
T
N
T
O
A
R
R
T
A
M
G E S
E E N
Y C O D E
A L
L O U T
S E T U P
1 6 : 9 ( W I D E )
U S – 8 5 8 3
O F F
Press 8 or 9 to select your desired setting item,
then press ENT.
Further items will be displayed.
Setting items:
LANGUAGES / TV SCREEN / COUNTRY CODE / PARENTAL /
DIGITAL OUT / CUSTOM SETUP*1
*1
Refer to “Custom Setup” on page 35.
3
Press 8 , 9, ; or : to change the setting, then
press ENT.
4
Press RETURN repeatedly until the SETUP mode
is deactivated.
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. If the vehicle’s
battery is disconnected, the settings will be cleared and will return
to the factory settings.
32-EN
∗1 AUTO:
The disc is played with the audio language or subtitle
language set as the priority language for the disc.
∗2 OTHER:
Set this to play the disc with a language other than one of
the languages displayed. Press ENT. then use the number
keys “0” to “9” to input the 4-digit language code. Then
press ENT. again. For the language codes, refer to “List of
Language Codes” (page 58).
• If you change the language setting when the disc is inside, the
setting is decided with one of the following operations.
-Turn OFF the main unit.
-Switch the source on the head unit.
• To temporarily change the language of the current disc, either do
so from the DVD menu or using the operation described in the
section “Switching the Audio Tracks” (page 18).
• If the disc does not include the selected language, the disc’s default
language is set.
• Languages set upon shipment from the factory:
Audio language: AUTO
Subtitle language: AUTO
Menu language: AUTO
• Press RETURN to return to the previous display.
Setting the TV Screen
Setting the Rating Level (Parental Lock)
Use the procedure described below to set the output screen according
to the type of TV monitor being used.
Use this function to restrict the viewing of movies to children of
appropriate age levels only.
Setting item: TV SCREEN
Setting contents: 16:9 (WIDE) / 4:3 (LB) / 4:3 (PS)
• For some discs, the picture may not be set to the selected screen
size. (For details, refer to the explanation on the disc’s jacket.)
• Press RETURN to return to the previous screen.
16:9 (WIDE)
Select this when
connected to a wide
screen TV. This is selected
upon shipment from the
factory.
4:3 LB (LETTER BOX)
Select this when connected to a
conventional 4:3 size (normal TV
aspect ratio) monitor. There may
be black bands visible at the top
and bottom of the screen (when
playing a 16:9 size movie). The
width of these stripes will depend
upon the original aspect ratio of the theatre release of the
movie.
Setting item: PARENTAL
Setting contents: PASSWORD
1 Press 8 or 9 to select “PARENTAL,” then press ENT.
The password input mode is activated.
2 Use the number keys “0” to “9” to input the 4-digit
password, then press ENT.
PASSWORD ∗ ∗ ∗ ∗
Input numbers are displayed as “∗.“
The default password is 1111 upon shipment from the
factory.
The restriction level (PARENTAL LEVEL) input display
appears.
• Each time you press CLR one digit is erased. Press CLR for at
least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
3 Press 8, 9, ; or : to select the restriction level (1 to 8),
then press ENT.
SET UP
PARENTAL
OFF
4:3 PS (PAN- SCAN)
Select this when connected
to a conventional 4:3 size
monitor. The picture will fill
the entire TV screen.
However, due to the
mismatch in aspect ratio,
parts of the movie at the
extreme left and right sides will not be visible (when playing a
16:9 size movie).
8
7
6
5
4
3
2
1
CHANGE PASSWORD
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level.
The lower the number, the higher the rating level.
• Press RETURN to return to the previous display.
Setting the Country Code
Set the country code of which you want to set the parental level
(Parental lock).
Setting item: COUNTRY CODE
Setting contents: CODE
1 Press 8 or 9 to select “COUNTRY CODE,” then press
ENT.
“COUNTRY CODE” will be reset.
COUNTRY CODE - - - 2 Use the number keys “0” to “9” to input the 4-digit
country code, then press ENT.
Example: US “8583” is input
4 Press RETURN repeatedly until the SETUP mode is
deactivated.
• If you want to change the password, select “CHANGE
PASSWORD,” then input the new password (4 digits).
• Write down the password on a piece of paper and store the paper
somewhere in case you forget it.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• Once set, this rating level remains in memory until changed. To
enable the play of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs
accessible to young children for whom you deem them
inappropriate.
COUNTRY CODE 8 5 8 3
• For the country codes, refer to “List of Country Codes” (pages 59
to 60).
• Each time you press CLR one digit is erased. Press CLR for at
least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
Tips
• Changing the rating level temporarily
Some discs may request that you change the rating level set
in the default settings during playback. In this case, the
message appears on the monitor screen “PARENTAL
LEVEL CHANGE OK?”
• To change parental level and play, press ENT.
The password input mode is displayed. Input the 4-digit
password you set in “Setting the Rating Level (Parental
Lock)”, then press ENT.
• To play without changing the parental level, press L.
(When L is pressed, playback will be at the parental level
set with “Setting the Rating Level (Parental Lock).”)
33-EN
Setting the Digital Output
Use the following procedure to set the digital audio signal output from
the DVA-9965.
Audio output/Optical digital audio output
Disc
Setting item: DIGITAL OUT
Further setting items: DOLBY D / DTS / MPEG
Press 8 or 9 to select your desired setting item, then
press ENT.
DOLBY D:
Sets Dolby Digital output.
The initial setting is LPCM.
DTS:
Sets DTS output.
The initial setting is LPCM.
MPEG:
Sets MPEG audio output by converting
48 kHz/16 bit linear PCM (DVD) or 44.1 kHz
(Video CD, CD).
The initial setting is LPCM.
DVD
Setting contents: BITSTREAM / LPCM
Press 8 or 9 to select BITSTREAM or LPCM, then press
ENT.
BITSTREAM: The digital output is switched automatically
according to the type of audio signal being
played.
Be sure to select “BITSTREAM” when you want
to connect a digital audio processor and play
Dolby Digital audio. “BITSTREAM” is selected
upon shipment from the factory.
LPCM:
The audio signal recorded on the disc is
converted to 48 kHz/16 bit (for DVDs) or 44.1
kHz (for video CDs and CDs) linear PCM audio
signals for output.
Video
CD
CD
• If “BITSTREAM” is set when an external audio processor is not
connected, no sound is output. Set “LPCM”.
• Press RETURN to return to the previous screen.
MP3
WMA
34-EN
Audio recording Digital output Optical digital Analog
format
audio output
audio
setting
(when a digital output
audio processor (RCA output)
is connected)
DTS
BITSTREAM
DTS Elementary
OK
Stream
LPCM
LPCM Encode
OK
2ch Down mix
(44.1kHz or
48kHz/16bit)
Dolby Digital
BITSTREAM Dolby Digital
OK
LPCM
LPCM
OK
(48kHz/16bit)
Linear 48kHz/ BITSTREAM
LPCM
OK
PCM 16bit
or LPCM
(48kHz/16bit)
LPCM
OK
48kHz/ BITSTREAM
20bit
or LPCM
(48kHz/16bit)
48kHz/ BITSTREAM
LPCM
OK
24bit
or LPCM
(48kHz/16bit)
LPCM
OK
96kHz/ BITSTREAM
16bit
or LPCM
(48kHz/16bit)
LPCM
OK
96kHz/ BITSTREAM
20bit
or LPCM
(48kHz/16bit)
96kHz/ BITSTREAM
LPCM
OK
24bit
or LPCM
(48kHz/16bit)
MPEG2
LPCM
OK
BITSTREAM
or LPCM
(44.1kHz or
48kHz/16bit)
MPEG1
BITSTREAM
LPCM
OK
or LPCM
(44.1kHz)
Linear PCM
OK
BITSTREAM
LPCM
or LPCM
(44.1kHz)
BITSTREAM
DTS
DTS Elementary
OK
Stream
LPCM
LPCM Encode
OK
2ch Down mix
(44.1kHz/16bit)
MPEG-1 32kHz/ BITSTREAM
LPCM
OK
Audio
16bit
or LPCM
Encode 2ch
Layer3
(32kHz/16bit)
OK
Bit Rate: 44.1kHz/ BITSTREAM
LPCM
or LPCM
32kbps- 16bit
Encode 2ch
(44.1kHz/16bit)
320kbps
48kHz/ BITSTREAM
LPCM
OK
16bit
or LPCM
Encode 2ch
(48kHz/16bit)
Windows 32kHz/ BITSTREAM
OK
LPCM
TM
Media
16bit
or LPCM
Encode 2ch
Audio
(32kHz/16bit)
OK
Bit Rate: 44.1kHz/ BITSTREAM
LPCM
or LPCM
32kbps- 16bit
Encode 2ch
(44.1kHz/16bit)
320kbps
48kHz/ BITSTREAM
LPCM
OK
16bit
or LPCM
Encode 2ch
(48kHz/16bit)
5
Custom Setup
Press RETURN repeatedly until the SETUP mode
is deactivated.
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. If the vehicle’s
battery is disconnected, the settings will be cleared and will return
to the factory settings.
Setting the CD Play Mode
8
ENT.
9
RETURN
The unit can be set to play only the audio data or only the MP3/WMA
files on discs containing both audio data and MP3/WMA data.
Setting item: CD PLAY MODE
Setting contents: CD-DA / COMPRESSED AUDIO
Only CD data can be played
back.
COMPRESSED AUDIO: Only MP3/WMA data can be
played back.
The initial setting at the factory is CD-DA.
CD-DA:
• If a disc has already been inserted, perform the setting after you
remove the disc.
• The setting cannot be carried out if an MP3 compatible changer is
used.
SETUP
Setting the Video CD Play Mode
Custom Setup Operation
• Custom Setup Operation is performed by the remote control unit.
The following 5 steps are common to each of the Custom
Setup settings. Refer to the specific section for details.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
2
3
A
V
O
A
I
U
N G
S
U N
R E
G I
S T
U
C
T
N
T
O
A
R
R
T
A
M
Setting item: VCD PLAY MODE
Setting contents: PBC ON / PBC OFF
PBC ON: The PBC menu is displayed.
PBC OFF: The PBC menu is not displayed.
The initial setting at the factory is PBC ON.
Setting the Pause Mode
In pause mode, screen blurring may occur. To overcome this, set
AUTO/FIELD/FRAME accordingly.
S E T UP
L
T
C
P
D
C
When playing a Playback Control (PBC) enabled video CD, you can
choose to set PBC ON or OFF.
G E S
E E N
Y C O D E
A L
L O U T
S E T U P
1 6 : 9 ( W I D E )
U S – 8 5 8 3
O F F
Setting item: PAUSE MODE
Setting contents: AUTO / FIELD / FRAME
If you experience blurring during pause mode, set to
FIELD or FRAME.
The initial setting at the factory is AUTO.
Press 8 or 9 to select “CUSTOM SETUP”, then
press ENT.
Press 8 or 9 to select your desired setting item,
then press ENT.
CUSTOM SETUP items:
CD PLAY MODE / VCD PLAY MODE / PAUSE MODE /
DOWNMIX MODE
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: STEREO / SURROUND ENCODED
STEREO:
Stereo Downmix
SURROUND ENCODED: Dolby surround compatible
Downmix
The initial setting at the factory is SURROUND ENCODED.
S E T UP
C U S T OM
C D
V C D
S E T U P
P L A Y
P L A Y
P A U S E
MO D E
MO D E
D OWNM I X
4
MO D E
MO D E
C D - D A
P B C
O N
A U T O
S U R R O U N D
Press 8 or 9 to change the setting, then press
ENT.
35-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from General Setting, Tuner Setting,
etc., to select your desired setting.
SOURCE/
POWER
BAND
Rotary encoder
*1 Refer to “Setting the Time and Calendar” (page 8).
*2 Displayed only when AUX is ON.
*3 Refer to “Setting the Auxiliary Data Field Display” section (page
40).
*4 Refer to “Setting User’s EQ mode” (page 21).
*5 Displayed only when the 2WAY/3WAY switch (pages 68, 69 and 71)
is set to 3WAY.
This function cannot be selected when an external audio processor
is connected.
*6 Refer to “Setting the Time Correction Unit” (page 26).
*7 Displayed when an Alpine external audio processor is not
connected.
*8 Displayed when STOP is set with a disc inserted in the unit, or
when a disc is not inserted.
5
6
f
g
GlideTouch bar
MENU
Setup Operation
The following 4 steps are common to each of the
Setup functions. Refer to the specific section for
details.
1
2
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
General Setting
General is selected on the setup main menu in step 3.
Setting the Clock display
Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.
Select the desired item by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under your selection.
GENERAL ↔ TUNER ↔ AUDIO ↔ DISP (DISPLAY) ↔ DEMO
The SETUP menu of the selected item is displayed.
4
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
Press MENU.
The main SETUP menu is displayed.
3
Change the parameter by pressing the
GlideTouch bar under the desired setting.
Select the desired item by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under your selection.
Setting items:
Setting item: CLOCK MODE
Setting contents: AM12:00 (12-hour (Initial setting) / 00:00 (24hour))
You can select the clock display type, 12-hour or 24-hour, depending
on your preference.
Playing MP3/WMA Data
Setting item: PLAY MODE
Setting contents: CD-DA (Initial setting) / MP3/WMA
This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback
may be difficult. For these special cases, you can select playback of
CD data only. You can set for MP3/WMA playback only.
CD-DA:
MP3/WMA:
Only CD data can be played back.
Only MP3/WMA file tracks can be played
back.
GENERAL
CLOCK MODE ↔ CLOCK ADJUST*1 ↔ PLAY MODE*8 ↔
BEEP ↔ SOUND GUIDE ↔ INT MUTE ↔ INT AUDIO ↔
AUX IN ↔ (AUX NAME)*2 ↔ OPTICAL OUT*7 ↔
CLOCK MODE
• Perform this setting before inserting a disc. If a disc has already
been inserted, perform the setting after you remove the disc.
• The setting cannot be carried out if an MP3 compatible changer is
used.
TUNER
XM ADF*3
Sound (Beep) Guide Function
AUDIO
SUBWOOFER ↔ EQ MODE*4 ↔ TW SETUP*5 ↔
SUBWOOFER
DISPLAY
DIMMER ↔ DIMMER LEVEL ↔ DISPLAY COLOR ↔ TEXT
SCROLL ↔ SCROLL TYPE ↔ FONT SELECT ↔ BGV SELECT
↔ OPENING MSG ↔ CALENDAR ↔ T.CORR*6 ↔ DIMMER
DEMO
DEMO
36-EN
Setting item: BEEP
Setting contents: ON (Initial setting) / OFF
This function will give audible feedback with varying tones
depending upon the button pressed.
Changing the Sound (Beep) Guide Pattern
Setting item: SOUND GUIDE
Setting contents: TYPE1 (Initial setting) / TYPE2 / TYPE3
Press this button to choose between 3 types of operation sounds.
• If you do not want the operational beep sounds, set “Sound (Beep)
Guide Function” (this page) to OFF.
Turning Mute Mode On/Off
Setting item: INT MUTE
Setting contents: ON (Initial setting) / OFF
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device.
Setting Tone Defeat for External Devices
Setting item: INT AUDIO
Setting contents: ON / OFF (Initial setting)
When inputting external devices to this unit, turning tone defeat on
will bypass EQ and MX, i.e., sound for external devices is output at
the default setting.
Setting the AUX Mode (V-Link)
Setting item: AUX IN
Setting contents: ON / OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA410C) to this component.
You can change the AUX name display when AUX ON is set. Select
the AUX name by sliding your finger on the GlideTouch bar to the
left or right. Then press the GlideTouch bar.
If the KCA-410C is connected, it is possible to select two AUX
names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/POWER to select AUX
mode and then press BAND to select your desired device.
Setting the Digital Output
Setting item: OPTICAL OUT
Setting contents: ON / OFF (Initial setting)
To connect an optical digital compatible audio processor other than
Alpine, optical digital output must be set to ON.
• After input selection is completed, turn the ignition off and back on
again. The digital output is set.
Audio Setting
Audio is selected on the setup main menu in step 3.
Subwoofer On and Off
Setting item: SUBWOOFER
Setting contents: ON (Initial setting) / OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output phase and level.
1 Press the Rotary encoder repeatedly to select the
SUBWOOFER mode.
SUBWOOFER → BALANCE → FADER → DEFEAT →
VOLUME → SUBWOOFER
• If you set the 2WAY/3WAY switch (pages 68, 69 and 71) to 3WAY,
you cannot adjust the FADER mode.
2 Press g or f.
The subwoofer output phase is toggled SUBWOOFER
NORMAL (0°) or SUBWOOFER REVERS (180°).
To adjust the level, turn the Rotary encoder.
Setting the Response Slope for the High Range Speaker
Setting item: TW SETUP
Setting contents: MAKER’S (Initial setting) / USER’S
Depending on the response characteristics of the speaker, care should
be taken when setting the response slope of the high range speaker to
FLAT in 3-way mode (see “Adjusting and Storing the Crossover
Settings” on page 24), as speaker damage may result.
MAKER’S : As protection from possible speaker damage,
FLAT cannot be set for the response slope of the
high range speaker in 3-way mode.
USER’S : The FLAT setting is possible in 3-way mode.
• A message is displayed when the response slope for the high range
speaker is set to FLAT in 3-way mode.
Display Setting
The display is selected on the setup main menu in step 3.
Dimmer Control
Setting item: DIMMER
Setting contents: AUTO (Initial setting) / MANUAL
AUTO :
When the headlights are turned on, the display
decreases the illumination, and the brightness
level which is set in “Setting the Display Dimmer”
(this page) is set.
MANUAL : Regardless of the headlights being on or off, the
display decreases the illumination, and the
brightness level which is set in “Setting the Display
Dimmer” (this page) is set.
Setting the Display Dimmer
Setting item: DIMMER LEVEL
Setting contents: Level1 / Level2 (Initial setting) / Level3
In the display Dimmer AUTO setting, three levels are available, the
lowest level (LEVEL 1) being the brightest when the car headlights
are on.
37-EN
Changing the Display Color
Setting item: DISPLAY COLOR
Setting contents: OFF (Initial setting) / AUTO
You can change the display color of the unit.
OFF : Displayed in full color.
AUTO : The character color, etc., is changed according to the
setting in “Setting the Multicolor Illumination”
(page 29).
Scroll Setting
Setting item: TEXT SCROLL
Setting contents: AUTO / MANUAL (Initial setting)
This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
AUTO :
The CD text information, the text information of
folder and file names, and the tags are scrolled
automatically.
MANUAL : The display is scrolled when a disc is loaded or
when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display.
• Even when the scroll setting is set to MANUAL with the DVA-9965
while displaying ARTIST NAME/ALBUM NAME, the text
information scrolls continuously.
Scroll Type Setting
Setting item: SCROLL TYPE
Setting contents: TYPE1 (Initial setting) / TYPE2
Two types of scroll can be selected.
You can select the scroll type you like.
Opening Message ON/OFF Setting
Setting item: OPENING MSG
Setting contents: ON / OFF (Initial setting)
You can select whether the opening display is shown or not when
power is turned ON. Choose between the standard display pattern and
the downloaded Profile data display pattern.
This function is only available if you have already downloaded the
profile data.
OFF mode:This shows the standard display pattern.
ON mode: This shows the downloaded Profile data and the
calendar message after data downloading.
Setting of Calendar Display Pattern Switching
Setting item: CALENDAR
Setting contents: dd/mm/yyyy / yyyy/mm/dd (Initial setting)
You can switch the calendar display pattern to be shown when the
time is displayed.
yyyy : shows the year
mm : shows the month
dd : shows the day
ex. dd/mm/yyyy → 25/12/2005
Demo Setting
Demo is selected on the setup main menu in step 3.
Demonstration
Setting item: DEMO
Setting contents: ON / OFF (Initial setting)
This unit has a Demonstration feature for the display and sound.
• To quit Demo mode, set to DEMO OFF.
Switching the Character Font
Setting item: FONT SELECT
Setting contents: TYPE1 (Initial setting) / TYPE2
Two types of font can be selected.
You can select the font type you like.
Switching the Animation Display Type
Setting item: BGV SELECT
Setting contents: OFF / TYPE1 (initial setting) / TYPE2 / TYPE3
/ TYPE4
You have a choice of 4 different background animation displays.
38-EN
SAT Radio Receiver
(Optional)
4
Press g or f to select the desired channel.
Holding down g or f will change channels
continuously.
• When using the optional remote control (RUE-4203), an SAT Radio
Channel can be directly called up with the numeric keypad of the
remote control.
SOURCE/
POWER
BAND
8
TITLE
-/J
1 While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press ENTER on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number is input.
Checking the SAT Radio ID Number
g
FUNC.
MENU
f
GlideTouch bar
9
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is
connected via the Ai-NET bus, the following
operations may be performed. However, the XM
Receiver and SIRIUS Receiver cannot be connected at
the same time.
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of the DVA-9965 in the
following way.
1
Receiving Channels with the SAT Radio
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with
over 100 digital audio channels. For a small monthly fee, subscribers
can hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite. For more information, visit XM’s website at
www.xmradio.com., or SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter
will be required. For details, consult you nearest ALPINE dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the DVA-9965 are operative only
when a SAT Receiver is connected.
1
2
Press SOURCE/POWER to select SAT Radio
mode.
XM mode:
XM1 → XM2 → XM3 → XM1
SIRIUS mode:
SIRIUS1 → SIRIUS2 → SIRIUS3 → SIRIUS1
3
ID number is displayed.
2
Press 8 or 9 to select desired category.
To cancel the ID number display, set the channel to
other than “0” in the XM mode, and in the SIRIUS
mode, set the channel to other than “255.”
• You cannot use “O,” “S,”“ I,” or “F” for the ID Number (XM
radio Receiver only).
• You can check the ID number printed on a label on your third
party, SAT Radio Receiver package.
Storing Channel Presets
1
2
3
Press BAND to select between one of the three
SAT Radio Preset Bands.
Each press changes the band:
While receiving a SAT Radio band, press g or
f to select channel “0” for XM and channel “255”
for SIRIUS.
4
Press BAND to select the desired band you want
to store.
After tuning in the desired channel, press FUNC.
to activate the preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar for at least 2 seconds, under the desired preset
to store the channel.
Repeat the procedure to store up to 5 other
channels onto the same band.
• To use this procedure for other bands, simply select the band
desired and repeat the procedure.
• A total of 18 channels can be stored in the preset memory (6
channels for each band; XM1, XM2 and XM3 or SIRIUS1,
SIRIUS2 and SIRIUS3).
• If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
39-EN
Receiving Stored Channels
Changing the Display
1
2
3
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel.
The unit can display this text information as explained below.
Press BAND to select the desired band.
Press FUNC. to activate the preset mode.
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar for
under the desired preset to receive the channel.
In XM or SIRIUS mode, press TITLE.
Each time you press this button, the display changes as shown
below.
PRESET NO./CHANNEL NO.
CATEGORY NAME
PRESET NO./CHANNEL NO.
→
CHANNEL NAME
Channel/Category Search Function
PRESET NO./CHANNEL NO.
You can search for programs by Channel No. or Category.
1
AUXILIARY DATA FIELD*1
Press and hold
in XM or SIRIUS mode to select
Category Search mode.
To search for a channel in the selected category, press
the GlideTouch bar or FUNC. to change to the Channel
search mode. Refer to “Channel Search mode” for
operation.
• Search mode is canceled by pressing and holding for at least 2
seconds in Category Search mode.
• The Category can be scrolled continuously by touching and
holding either side of the GlideTouch bar.
Channel Search mode
2
Within 10 seconds, select your desired Channel No.
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar for
under the desired channel.
• Search mode is canceled by pressing and holding for at least 2
seconds in Channel Search mode.
• While in Channel Search mode, press 8 or 9 to select the another
Category.
• While in Channel Search mode, press to switch to the Category
Search mode.
• The Channel can be scrolled continuously by touching and holding
either side of the GlideTouch bar.
1
2
Press and hold
for at least 2 seconds in XM or
SIRIUS mode to activate Quick Search mode.
Within 10 seconds, select your desired channel by
sliding your finger on the GlideTouch bar to the
left or right.
The selected Channel is received.
→
PRESET NO./CHANNEL NO.
CHANNEL NAME
→
PRESET NO./CHANNEL NO.
→
CATEGORY NAME
CHANNEL NAME
1
* XM mode only:
When ADF is turned OFF, this information is not displayed (see
“Setting the Auxiliary Data Field Display” on this page).
• When the “Scroll Setting” (page 38) is set to “AUTO,” the display
scrolls continuously.
When the Scroll Setting is set to “MANUAL,” the display scrolls
only once after any function is performed (PRESET, BAND,
SEARCH, etc.).
Press and hold TITLE for more than 2 seconds to scroll the
Sdisplay manually.
• “Channel Number” and “Clock” displays do not scroll.
• Depending on the model, the display may differ from the one
shown above.
Setting the Auxiliary Data Field Display
The XM Auxiliary Data Field (ADF) display can be switched on or
off.
1
2
Press MENU.
Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.
The main SETUP menu is displayed.
3
Quick Search Function
You can search for all Channels.
MUSIC TITLE
*1
PRESET NO./CHANNEL NO.
Category Search mode
Within 10 seconds, select your desired Category by
sliding your finger on the GlideTouch bar to the
left or right. Press -/J to receive the selected
Category.
→
CALENDAR/CLOCK
Sound dependent display
2
ARTIST NAME
Select TUNER by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under TUNER.
The TUNER SETUP menu is displayed.
4
5
6
Select XM ADF by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under XM ADF.
Press the GlideTouch bar under ON or OFF in the
Function Guide display.
Press and hold MENU for at least 2 seconds to
return to the normal mode.
• If MENU is pressed while adjusting or setting the itmes in the
MENU mode, the unit will return to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
40-EN
iPod™ Operation (Optional)
Searching for a desired Song
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the DVA-9965 can use these to ease song
searches.
SOURCE/
BAND
POWER
TITLE
-/J
• When Shuffle (M.I.X.) is on, the search function cannot be used.
Searching by Playlist
1
2
g f
GlideTouch bar
FUNC.
Press
.
Select Playlist Search by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Playlist Search.
*1
3
Within 10 seconds, select the playlist by sliding
your finger on the GlideTouch bar to the left or
right.
When an iPod™ or iPod™ mini is connected to the optional Alpine
Interface adapter for iPod™ (KCA-420i), it can be controlled from
the DVA-9965. However, operation from the iPod is disabled.
4
• For details, refer to the Owner’s Manual of the iPod™ Interface
adapter (KCA-420i).
• Refer to the iPod’s documentation for a description of its functions.
To search for a song in the selected playlist
1
1 After selecting the playlist in step 3* , press the GlideTouch
bar or FUNC. to change to the song search mode of the
selected playlist.
Playback
1
2
Return to the beginning of the current song:
Press g.
Fast backward:
Press and hold g.
Advance to the beginning of the next song:
Press f.
Fast forward:
Press and hold f.
3
2 Within 10 seconds, select a song by sliding your finger on
the GlideTouch bar to the left or right, then pressing -/J or
the GlideTouch bar.
The selected song is played back.
Press SOURCE/POWER to switch to the iPod
mode.
Press g or f to select the desired song.
To pause playback, press :/J.
Pressing :/J again will resume playback.
• If a song is playing on the iPod when it is connected to the
DVA-9965, it will continue playing after the connection.
• If using the iPod with a changer, the Versatile Link Terminal (KCA410C) must be used. In this case, press BAND to select the
changer mode applicable to the iPod.
• With the DVA-9965, you can return to the beginning of the current
track, fast forward/fast reverse and playback/pause. The source
operation mode is selected by touching the GlideTouch bar under
FUNC. in the function guide display.
Within 10 seconds, press -/J to play back a
selected playlist.
• If you choose “iPod name” of iPod in step 3* and you press -/ J,
all songs in iPod are played back.
• The search mode is cancelled by pressing and holding
for at
least 2 seconds in the search mode.
• The playlist can be scrolled continuously by touching and holding
either side of the GlideTouch bar.
1
Searching by artist name
1
2
Press
.
Select Artist Search by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Artist Search.
*2
3
4
Within 10 seconds, select the artist to be played
back by sliding your finger on the GlideTouch bar
to the left or right.
Within 10 seconds, press -/J to play back all
songs of the selected artist.
To search for an album of the selected artist
2
1 After selecting the artist in step 3* , press the GlideTouch
bar or FUNC. to change to the album search mode of the
selected artist.
3
2* Within 10 seconds, select the album to be played back by
sliding your finger on the GlideTouch bar to the left or right.
3 Press -/J to play back all songs of the selected album.
Continued
41-EN
To search for a song of the selected album
Quick Search
3
1 After selecting the album in step 2* , press the GlideTouch
bar or FUNC. to change to the song search mode of the
selected album.
2 Within 10 seconds, select a song by sliding your finger
on the GlideTouch bar to the left or right, then pressing
-/J or the GlideTouch bar.
The selected song is played back.
• If you choose ALL in step 3*2 , and you press :/ J, all songs in
iPod are played back. If you choose ALL, and you press the
GlideTouch bar or FUNC., the ALBUM search mode for all artists
is activated.
• If you choose ALL in step 2*3 , and you press :/ J, all songs of the
selected artist are played back. If you choose ALL, and you press
the GlideTouch bar or FUNC., the SONG search mode for the
selected artist is activated.
• The search mode is cancelled by pressing and holding
for at
least 2 seconds in the search mode.
• The artist, album or song can be scrolled continuously by touching
and holding either side of the GlideTouch bar.
Searching by album name
1
2
Press
.
Select Album Search by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Album Search.
*4
3
4
Within 10 seconds, select the album to be played
back by sliding your finger on the GlideTouch bar
to the left or right.
Within 10 seconds, press -/J to play back all
songs of the selected album.
You can search for songs.
1
2
4
2 Within 10 seconds, select a song by sliding your finger on
the GlideTouch bar to the left or right, then pressing -/ J or
the GlideTouch bar.
The selected song is played back.
• If you choose ALL in step 3* , and you press :/ J, the search
mode is canceled. If you choose ALL, and you press the
GlideTouch bar or FUNC., the SONG search mode for all albums
is activated.
• The search mode is cancelled by pressing and holding
for at
least 2 seconds in the search mode.
• The album or song can be scrolled continuously by touching and
holding either side of the GlideTouch bar.
4
42-EN
Select the desired song by sliding your finger on
the GlideTouch bar to the left or right.
The selected song is played back immediately.
• The search mode is cancelled by pressing and holding
for at
least 2 seconds in the search mode.
• The songs can be scrolled continuously by touching and holding
either side of the GlideTouch bar.
• “Quick Search” is displayed during Quick search.
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod is displayed as M.I.X. on the
DVA-9965.
Shuffle Albums (M.I.X. ALBUM):
Select an album randomly in the iPod, and plays back the songs of the
album in sequential order. If a song has been selected in the playlist/
artist search mode before selecting Shuffle Album, only the albums
within the playlist/artist are selected randomly. The songs of the
album are played back sequentially.
Shuffle Songs (M.I.X. ALL ON):
All songs in the iPod are played back in random sequence. If a song
has been selected in the playlist/artist search mode before selecting
Shuffle song, only the songs of the playlist/artist/album are played
back randomly.
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
To search for a song of the selected album
1 After selecting the album in step 3* , press the GlideTouch
bar or FUNC. to change to the song search mode of the
selected album.
Press and hold
for at least 2 seconds to activate
the quick search mode.
2
Press the GlideTouch bar under the M.I.X.
function in the function guide display.
The songs will be played back in random sequence.
→ M.I.X.
→
(Shuffle Albums)
M.I.X.
→
(Shuffle Songs)
(off)
The Random Play mode is canceled by selecting off.
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
• For details of the search mode, refer to “Searching for a desired
Song” (page 41).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X.), the songs will not play back randomly even when
Shuffle album is selected.
• If there is no album in the playlist, Shuffle (M.I.X.) will not function
even when Shuffle album is selected.
Repeat Play
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
2
Press the GlideTouch bar under the RPT function
in the function guide display.
The song will be played back repeatedly.
RPT
↔
(Repeat One)
(off)
The RPT mode is canceled by selecting off.
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
• During repeat playback, no other songs are selectable by pressing
g or f.
Displaying the Text
You can display the tag information of a song in the iPod.
Press TITLE.
Each press changes the display.
ELAPSED TIME
ARTIST NAME*1
ELAPSED TIME
→
ALBUM NAME*1
→
SONG TITLE*1
ELAPSED TIME
SONG TITLE*1
ALBUM NAME*1
ELAPSED TIME
→
Sound dependent display
→
CALENDAR/CLOCK
ELAPSED TIME
ARTIST NAME*1
ALBUM NAME*1
*1 “NO DATA” is displayed if there is no information.
• When the Scroll Setting (page 38) is set to “MANUAL,” press and
hold TITLE for at least 2 seconds to scroll the tag information
only once.
• Only alphanumeric characters can be displayed.
• When the artist name, album name or song name is set on iTunes,
and the amount of characters is increased, songs may not be
played back when connected to the adapter. Therefore, a maximum
of 250 characters is recommended. The maximum number of
characters for the head unit is 64.
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the DVA-9965.
• Playlist name cannot be displayed.
43-EN
Changer (Optional)
SOURCE/
POWER
-/J
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play CDROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
BAND
2
Press SOURCE/POWER to switch to the MP3
Changer mode.
Press FUNC. to activate the direct disc recall
mode.
Source selection mode ↔ Audio function mode ↔
Direct disc recall mode ↔ Source operation mode ↔
Source selection mode
FUNC.
GlideTouch bar
3
Controlling CD Changer (Optional)
After activating the direct disc recall mode in step
2, select a disc (1 to 6) by touching the
GlideTouch bar and sliding your finger to the left
or right. Press the GlideTouch bar under the
desired disc.
An optional 6-disc or 12-disc CD Changer may be connected to this
unit if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the KCA410C (Versatile Link Terminal) multiple changers can be controlled
by this unit.
See “Multi-Changer Selection” on this page for selecting the CD
Changers.
4
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well
as the CD changer.
Alpine's Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2 Switching devices,
you can connect up to 6 CD Changers. When using KCA-410C
(Versatile Link Terminal), you can connect two changers and two
external outputs (AUX).
1
Press SOURCE/POWER to activate the
CHANGER mode.
• The source indicator varies depending on the connected source.
2
Press FUNC. to activate the direct disc recall
mode.
Source selection mode ↔ Audio function mode ↔
Direct disc recall mode ↔ Source operation mode ↔
Source selection mode
3
After activating the direct disc recall mode in step
2, select a disc (1 to 6) or (1 to 12) by touching the
GlideTouch bar and sliding your finger to the left
or right. Press the GlideTouch bar under the
desired disc.
The selected disc number appears in the display and CD
playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit.
For details, please see the CD/MP3/WMA section.
44-EN
To pause playback, press -/J.
Pressing -/J again will resume playback.
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA” pages 11 to 15.
Multi-Changer Selection (Optional)
1
2
Press SOURCE/POWER on this unit to activate
the CD Changer mode.
Press BAND to activate the CD Changer Selection
mode.
The CD Changer Selection mode remains active for a few
seconds.
3
Press BAND until the desired CD Changer
indicator appears on the display.
• If the selected CD Changer is not connected, the display will show
“NO CHANGER.”
• To operate the selected changer, see “CD/MP3/WMA” (page 11).
• For further details about the external input (AUX) when using
KCA-410C, see “Setting the AUX Mode (V-Link)” on page 37.
External Audio Processor
(Optional)
SOURCE/
POWER
BAND
Rotary encoder
Adjustment Procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
1
Speaker Setup (page 49)
(Turning the speakers to be used on and off and
setting their response)
B
MENU
GlideTouch bar
When an external audio processor is connected to this unit, you
can operate it from this unit. Some audio processors may not be
operated. When PXA-H900 is connected, some of the operations may
not be performed from this unit. In this case, operate them in the
connected product. Explanations below is the case when PXA-H700
or PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the
MRA-D550 is connected. Additionally, if the MRA-F350 is
connected, the following setting “Setting the MX mode” is not
available. Also, the setting content differs between the PXA-H700
and PXA-H701.
• This unit cannot be connected to the PXA-H510.
• The unit has no Bass Focus function.
• If no operation is performed for approximately 15 seconds when
setting the external audio processor, the A.PROC mode is canceled,
and the normal mode returns.
2
Adjusting the speaker levels (page 50)
(Adjusting the signal output level to the various
speakers)
B
3
Mixing bass sound to the rear channel
(page 50)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
B
4
Adjusting the acoustic image (page 51)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
B
5
Achieving powerful high volume sound
(page 51)
(Achieving energetic sound with even greater power,
like the sound in a movie theatre)
B
6
Adjusting the DVD Level (page 51)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
B
7
Storing settings in the Memory (page 53)
(Storing all the settings and adjustments made on the
DVA-9965 (not only the above settings/adjusts) in the
memory)
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
45-EN
Setting the Speakers
1
2
3
4
5
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the Speaker Select mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Speaker
Select mode.
Touch the GlideTouch bar and select the speaker
by sliding it to the left or right, then press the
GlideTouch bar.
Touch the GlideTouch bar, and select any
speaker (ON/OFF) by sliding it to the left or right,
then press the GlideTouch bar.
FRONT1: OFF/TW (Tweeter)/FULL (Full Range)*
FRONT2: OFF/ON
REAR:
OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
* Displayed when “USER’S” is set in “Setting the Response Slope
for the High Range Speaker” (page 37).
6
7
9
To adjust another speaker, return to the previous
display by pressing MENU and repeat step 5.
When the setting is complete, press and hold
MENU for at least 2 seconds.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 49).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Select the MX Level by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired level or OFF
(Non Effect).
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and
produces well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback.
MX takes advantage of this large data quantity to reproduce a
more clear, clean output.
CMPM/SAT (MX level 1 to 3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close to
the original.
DVD (Video CD)
(MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as
music clip. MX uses this data to reproduce the sound
accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that
corresponds to the media connected.
If two external devices are connected, a different MX
mode for each media can be selected.
10
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
Set MX Mode of the External Audio
Processor
• The contents of MX set here is reflected to PXA-H700 or PXAH701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for AM radio.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD and
iPod.
• If no operation is performed for 15 seconds, the unit will return to
the normal mode.
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
X-OVER Adjustment
1
2
3
1
2
3
4
5
6
7
8
Check that Defeat mode is off (page 20).
Press MENU.
Select the Media Xpander mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Media
Xpander mode.
Press the GlideTouch bar under ON to activate
MX.
4
Press and hold MENU for at least 2 seconds.
Select the Media Xpander mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Media
Xpander mode.
46-EN
Press and hold MENU for at least 2 seconds.
Select the Crossover (X-OVER) mode by sliding
your finger on the GlideTouch bar to the left or
right. Press the GlideTouch bar under the
Crossover (X-OVER) mode.
Select L+R or L/R by pressing and holding BAND
for at least 2 seconds.
L+R: Sets the same adjustment values for the left and
right channels.
L/R: Different adjustment values can be set for the left
and right channels.
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
Press SOURCE/POWER to select the source to
which you want to apply MX (Media Xpander).
Check that Defeat mode is off (page 20).
5
6
7
8
Select the desired channel by pressing BAND.
Touch the GlideTouch bar, and select the desired
cut-off frequency (Crossover Point) by sliding it to
the left or right, then press the GlideTouch bar.
Press SOURCE/POWER to adjust the slope.
Turn the Rotary encoder to adjust the output
level.
9
10
To adjust other channels, repeat steps 5 to 8.
When the setting is complete, press and hold
MENU for at least 2 seconds.
• When the speaker is set to the “OFF” mode, the X-OVER for that
speaker cannot be set. Refer to “Setting the Speakers” (page 46).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The H.P.F. filter cannot be set to OFF (slope OFF) if Tweeter is
selected for FRONT1. Or, only the subwoofer is adjustable if
STEREO is selected for the subwoofer.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
Concrete examples
Calculating the time correction value for the front left speaker
on the diagram below.
Conditions:
Distance between farthest speaker and listening position:
2.25 m (88-3/4")
Distance between front left speaker and listening position:
0.5 m (20")
Calculation:
L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4")
Compensation time = 1.75 ÷ 343 x 1000 = 5.1 (ms)
In other words, setting the time correction value for the front
left speaker to 5.1 (ms) sets a virtual distance matching the
distance to the farthest speaker.
Performing Time Correction Manually (TCR)/
Phase Switching
Because of the particular conditions inside the vehicle, there can be
major differences in the distances between the various speakers and
the listening position. It is possible to calculate the optimum
correction values and eliminate the time error at the listening position
yourself using this function.
5.1ms
0.5m
2.25m
Calculating the Time Correction
1
2
Sit in the listening position (the driver’s seat, for
example) and measure the distance (in meters)
between your head and the various speakers.
Calculate the difference in distance between the
farthest speaker and the other speakers.
L=
3
(distance of farthest speaker)
– (distance of other speakers)
Divide the distances calculated for the different
speakers by the speed of sound (343 m/s
temperature 20°C).
The sound is uneven
because the distance
between the listening
position and the different
speakers is different.
The difference in the
distance between the front
left and rear right speakers
is 1.75 meters (68-3/4").
Time correction eliminates
the difference between the
time required for the sound
from the different speakers
to reach the listening
position.
Setting the time correction of
the front left speaker to
5.1 ms makes it possible to
coordinate the distance from
the listening position to the
speaker.
This value is the time correction value for the various
speakers.
47-EN
Inputting the Time Correction
4
5
6
7
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the Time Correction (T.CORR/PHASE) mode
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar under
the Time Correction (TCR/PHASE) mode.
Select L+R or L/R by pressing and holding BAND
for at least 2 seconds.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left
and right channels.
8
9
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and center
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
2
3
4
Select the desired channel by pressing BAND.
• The time correction values can be adjusted with the GlideTouch
bar.
10
11
12
When the setting is complete, press and hold
MENU for at least 2 seconds.
• When changing the time correction value, refer to “Setting the
Time Correction Unit” (page 26).
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 46).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
48-EN
Select the Graphic EQ mode by sliding your finger
on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Graphic EQ
mode.
Select L+R or L/R by pressing and holding BAND
for at least 2 seconds.
When parametric EQ is adjusted, this setting will be
turned off.
5
Switch the phase (PHASE) by pressing SOURCE/
POWER.
To adjust other channels, repeat steps 8 to 10.
Press and hold MENU for at least 2 seconds.
L+R: Sets the same adjustment values for the left and
right channels.
L/R: Different adjustment values can be set for the left
and right channels.
Adjust the calculated time correction value (0.00 to
20.00ms) by turning the Rotary encoder.
Switching the Phase
Check that Defeat mode is off (page 20) and G.EQ
is selected in “Setting User’s EQ mode” (page 21).
6
7
8
9
Select the channel by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the channel.
Select the desired band by pressing BAND.
Adjust the level by turning the Rotary encoder.
To adjust other bands, repeat steps 6 to 7.
When the setting is complete, press and hold
MENU for at least 2 seconds.
• When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 46).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the
40 Hz or 20 Hz band has no effect. Additionally, you may overload
and damage the speakers.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
Parametric Equalizer Adjustments
Setting Bass Compressor
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s centre frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
You can adjust the sound of low frequencies as desired.
1
2
3
4
Check that Defeat mode is off (page 20) and P.EQ is
selected in “Setting User’s EQ mode” (page 21).
Press and hold MENU for at least 2 seconds.
Select L+R or L/R by pressing and holding BAND
for at least 2 seconds.
When graphic EQ is adjusted, this setting will be turned
off.
6
7
8
9
10
11
4
Select the Parametric EQ mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Parametric
EQ mode.
L+R: Sets the same adjustment values for the left and
right channels.
L/R: Different adjustment values can be set for the left
and right channels.
5
1
2
3
Select the desired channel by sliding your finger
on the GlideTouch bar to the left or right. The
channel changes by pressing the GlideTouch
bar.
Press BAND to select the band.
Select the frequency sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the frequency.
Press SOURCE/POWER to set the band width (Q).
5
Select the BASS COMP. mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the BASS COMP.
mode.
Touch the GlideTouch bar, and select the desired
mode by sliding your finger to the left or right, then
press the GlideTouch bar.
When the setting is complete, press and hold
MENU for at least 2 seconds.
Speaker Setup
The PXA-H700 or PXA-H701 can be set according to the playable
frequency range of your speakers.
Check the playable frequency range of the speakers (not including the
subwoofer) before performing this operation to verify whether the
speakers can play low frequencies (of about 80 Hz or less).
• Avoid stopping, pausing, switching the disc, cueing, fastforwarding or switching the audio channel of this unit while
making this adjustment. The setting is cancelled if Decode mode is
switched.
1
2
3
4
When the setting is complete, press and hold
MENU for at least 2 seconds.
• When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 46).
• It is not possible to adjust the frequencies of adjacent bands within
7 steps.
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the
40 Hz or 20 Hz band has no effect. Additionally, you may overload
and damage the speakers.
• When the parametric EQ is adjusted, the adjustment for graphic
EQ becomes ineffective.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
Press and hold MENU for at least 2 seconds.
Bass sound is emphasized more as the mode is
sequentially switched as MODE1 → 2 → 3, offering you
vivid low frequencies.
Select OFF when the setting is not necessary.
Adjust the level by turning the Rotary encoder.
To adjust other bands, repeat steps 6 to 9.
Check that Defeat mode is off (page 20).
5
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the Speaker Setup mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Speaker
Setup mode.
Touch the GlideTouch bar, and select the speaker
by sliding your finger to the left or right, then press
the GlideTouch bar.
Select the speaker characteristic by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the speaker
characteristic.
OFF*1:
SMALL:
When no speaker is connected.
When a speaker that cannot play low
frequencies (80 Hz or less) is connected.
LARGE*2: When a speaker that can play low frequencies
(80 Hz or less) is connected.
*1 It is not possible to set the front speakers to “OFF”.
*2 If the front speakers are set to “SMALL”, the rear and
centre speakers cannot be set to “LARGE”.
Continued
49-EN
6
When the setting is complete, press and hold
MENU for at least 2 seconds.
• The subwoofer can be set only to ON/OFF.
• If the center speaker is turned “OFF,” the centre channel’s audio
signals are added to the audio signals output from the front
speakers.
• If you set the speaker response to “OFF,” also set the speaker
setting to “OFF.” (page 46)
• Perform the setup for all the speakers (“Front,” “Center,” “Rear”
and “Subwoofer”). If not, the sound may not be balanced.
• When centre is set to “OFF”, the setting is ineffective even if
centre is set with this function.
• Through changing the settings on each speaker, a change in the
output of the other speakers may occur due to the setting
requirements.
• When using the PRO LOGIC II, if the rear speaker is set to
“LARGE”, then there will be no output from the subwoofer.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
Setting of Dolby Digital
Adjusting the speaker levels (OUTPUT LEVEL)
Mixing bass sound to the rear channel (REAR MIX)
This function mixes the front channel audio signals to the audio
signals output from the rear speakers, improving the sound in the
vehicle’s rear seat.
• Avoid stopping, pausing, switching the disc, cueing, fastforwarding or switching the audio channel of this unit while
making this adjustment. The setting is cancelled if the Decode
mode is switched.
1
2
3
4
5
The test tones help to make the volume adjustments of the different
speakers. When levels are equal, a strong sense of presence can be
heard from the different speakers at the listening position.
• Avoid stopping, pausing, switching the disc, cueing, fastforwarding or switching the audio channel of this unit while
making this adjustment. The setting is cancelled if the decode mode
is switched.
1
2
3
4
Select the Multi CH Setup mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multi CH
Setup mode.
Select OUTPUT LEVEL by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under the OUTPUT LEVEL mode.
The test tone is reproduced by each speaker
automatically.
5
Adjust the output level by turning the Rotary
encoder to balance the volume of each speaker.
• The adjustment range for the different speakers is –10 dB - +10 dB.
• Adjust based on the front speakers.
6
When the setting is complete, press and hold
MENU for at least 2 seconds.
• If a speaker is set to off mode, that speaker’s level adjustment
cannot be made. Refer to “Speaker Setup” (page 49).
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
• While adjusting the speaker, it cannot be switched.
50-EN
Press and hold MENU for at least 2 seconds.
Select the Multi CH Setup mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multi CH
Setup mode.
Select the REAR MIX mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the REAR MIX mode.
Select the REAR MIX ON/OFF by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the REAR MIX ON/OFF.
If ON is set, the audio signal which is output from the rear
speaker is mixed to the front audio signal.
6
Adjust the level by turning and then pressing the
Rotary encoder.
The level can adjusted in five steps: –6, –3, 0, +3 and +6. The
higher the level, the more bass is output from the rear
speakers. (The effect differs according to the software (DVD,
etc.).)
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Check that Defeat mode is off (page 20).
7
When the setting is complete, press and hold
MENU for at least 2 seconds.
• This adjustment is ineffective when the rear speaker setup setting is
set to “OFF.”
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
Adjusting the acoustic image (BI-PHANTOM)
In most installations, the centre speaker must be placed directly
between the front passenger and driver. Using this function, the centre
channel information is distributed to the left and right speakers. This
creates an acoustic image simulating a centre speaker directly in front
of each listener. Adjusting the centre width in PL II MUSIC (see
“Using the Pro Logic II Mode,” page 52), makes this function
ineffective.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
1
2
3
4
5
7
With Dolby Digital, the dynamic range is compressed so that
powerful sound can be achieved at regular volume levels. This
compression can be cancelled to achieve an energetic sound with even
greater power, like the sound in a movie theatre.
This function works only in the Dolby Digital mode.
1
2
3
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the Multi CH Setup mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multi CH
Setup mode.
4
5
Select the BI-PHANTOM mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the BIPHANTOM mode.
Select the BI-PHANTOM ON/OFF by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the
BI-PHANTOM ON/OFF.
If ON is set, the soundstage created is as if you are
positioned directly in front of the centre speaker by
distributing the centre speaker sound left and right.
6
Achieving powerful high volume sound (LISTENING)
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the Multi CH Setup mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multi CH
Setup mode.
Select the LISTEN MODE by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under the LISTEN MODE.
Select the STD (Standard) or MAX (Maximum) by
sliding your finger on the GlideTouch bar to the
left or right. Press the GlideTouch bar under the
STD or MAX.
STD: For powerful sound at regular volume levels
MAX: For powerful sound at high volumes
6
When the setting is complete, press and hold
MENU for at least 2 seconds.
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
Adjust the level by turning and then pressing the
Rotary encoder.
Adjusting the DVD Level
The level can be adjusted within the range of –5 to +5.
The higher the level, the more the position of the centre
speaker is shifted to the sides.
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
When the setting is complete, press and hold
MENU for at least 2 seconds.
• This adjustment is effective when the setting of the centre speaker
to SMALL or LARGE in the speaker setup settings.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 46).
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
• Avoid stopping, pausing, switching the disc, cueing, fastforwarding or switching the audio channel of this unit while
making this adjustment. The setting is canceled if the Decode mode
is switched.
1
2
3
4
5
6
7
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the DVD Level mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the DVD Level mode.
Press the GlideTouch bar to the left or right to
select the mode (DOLBY DIGITAL, DOLBY PL II,
DTS, PCM) to be adjusted.
Adjust the level by turning the Rotary encoder.
The level can be adjusted in the range of –5 to +5.
When the other mode level is adjusted, press
MENU to return to the previous display, then
repeat steps 4 and 5.
When the setting is complete, press and hold
MENU for at least 2 seconds.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
51-EN
Using the Pro Logic II Mode
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a “REAR
FILL” function for outputting the signals of the front channel to the
rear channel.
1
2
3
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the Dolby PL II mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the Dolby PL II mode.
The DOLBY PL II setup mode is activated.
4
5
Select the DOLBY PL II by sliding your finger on
the GlideTouch bar to the left or right, then press
the GlideTouch bar.
Select the desired mode by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired mode.
PL II MOVIE:
Suits the stereo TV shows and all programs
encoded in Dolby Surround. It improves the sound
field directivity to near that of discrete 5.1-channel
sound.
PL II MUSIC:
Can be used for all stereo music recordings, and
provides a wide, deep sound field.
PL II FILL:
Depending on the input signals, the sound may only
be output from the front speakers. In this case, the
“REAR FILL” function can be used to output signals
from the rear speakers as well.
OFF: Turns DOLBY PL II function to OFF.
If PL II MUSIC is selected, the center width can be adjusted
with the following operations.
This function offers the optimum vocal position by adjusting
the center channel position between the centre speaker and
the L/R speaker. (The adjustments established in “Adjusting
the acoustic image” (page 51) are ineffective while this
function is activated.)
Selecting the CENTER WIDTH CONT.
1) Select CENTER WIDTH by activating the DOLBY PL II
setup mode in step 4 of “Using the Prologic II Mode.”
2) Select ON or OFF by sliding your finger on the
GlideTouch bar to the left or right. Press the GlideTouch
bar under the ON or OFF.
If ON is set, you can enjoy the optimum vocal position
by distributing the center channel sound between the
center speaker and L/R speaker.
3) Adjust the level by turning the Rotary encoder.
The level can be adjusted between 0 to 7. When the
level increases, the centre channel position moves from
the centre speaker position to both sides.
52-EN
6
When the setting is complete, press and hold
MENU for at least 2 seconds.
• This adjustment is effective when the setting of the centre speaker
is SMALL or LARGE in the speaker setup settings.
• Avoid stopping, pausing, switching the disc, cueing, fastforwarding or switching the audio channel of this unit while
making this adjustment. The setting is cancelled if the Decode
mode is switched.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 46).
• This function only works with two-channel signals. This operation
is ineffective when 5.1-channel DTS or Dolby Digital signals are
input.
• If the REAR FILL setting is made while REAR MIX is ON, the
sound for rear fill is unchanged. REAR MIX is given priority
during all 2 channel decoding other than linear PCM.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 53.
Linear PCM Setting
The output when playing discs recorded in linear PCM can be set to 2
or 3 channels.
1
2
3
4
5
Check that Defeat mode is off (page 20).
Press and hold MENU for at least 2 seconds.
Select the DVD Level mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the DVD Level mode.
Select the PCM MODE by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the PCM MODE.
Select the desired mode by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired mode.
2CH OUTPUT : 2ch output (L/R)
3CH OUTPUT : 3ch output (L/R/CENTER)
6
When the setting is complete, press and hold
MENU for at least 2 seconds.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 46).
Storing Settings in the Memory
Up to 6 settings can be stored on the unit.
All settings and adjustments described below are stored in one
memory preset.
Setting/adjusting items
Setting the Speakers
Setting Time Correction/Switching Phase
Adjusting EQ
Adjusting X-OVER
Setting MX
Setting BASS COMP.
Setting PRO LOGIC II/Adjusting the
Centre Width*
Adjusting Dolby Surround*
Linear PCM Setting*
Refer to page
46
47, 48
48, 49
46
46
49
52
50, 51
52
* Depending on the input signal, sound effect may not be obtained.
1
2
3
Press MENU.
Touch the GlideTouch bar, select AP Preset Mode
by sliding it to the left or right, then press
GlideTouch bar.
Touch the GlideTouch bar, select the preset
number (1 through 6) by sliding it to the left or
right, then press and hold the GlideTouch bar for
at least 2 seconds to store the adjusted contents.
• This function is operable only when Defeat is set to OFF.
• The stored contents will not be deleted even when battery power
cord is detached.
Getting out the Preset Memory
1
2
3
4
Check that Defeat mode is off (page 20).
Press MENU.
Touch the GlideTouch bar, select AP Preset mode
by sliding it to the left or right, then press the
GlideTouch bar.
Touch the GlideTouch bar, and select a preset
number (1 through 6) you wish to recall by sliding
it to the left or right, then press the GlideTouch
bar.
• It takes a few moment to get out the preset memory.
53-EN
DVD:
Remote Control
Controls on Remote Control
%
1
2
3
4
&
(
)
~
+
5
6
,
7
8
-
9
!
"
7 -/J Button
Switches between play and pause.
SEARCH Button
MP3/WMA mode: Folder/File Name Search mode is
displayed on the monitor screen by
pressing and holding more than 2
seconds.
8 L Button
Performs stop.
DVD/Video CD:
Pressing once sets the PRE-STOP,
Pressing twice sets stop.
9 MENU Button
DVD mode:
Shows the menu display.
Video CD mode: PBC ON/OFF (Video CD with PBC
function)
! CLR Button
.
/
#
$
• When pressed and held in while in the
pause mode, the disc is played in
reverse slow motion at 1/8th the normal
speed. When held in for 5 more seconds,
the reverse slow motion speed switches
to 1/2 the normal speed.
• The picture is reversed by one frame
each time the button is pressed in the
pause mode.
Removes numbers (one character at a time) that have
been selected and input.
Press and hold for 2 seconds. All the characters which
were selected and input are erased.
" DISP/TOP M. Button
:
DISC mode:
DVD mode:
Shows playback status.
By pressing more than 2 seconds, shows
the top menu display.
# SETUP Button
DVD SETUP list display appears.
1 PWR Button
Turns the power ON and OFF.
2 SRC Button
Selects the audio source.
3 DN Button
Radio mode:
Selects, in descending order, stations
programmed into the radio's presets.
MP3/WMA mode: Folder Select (DN) Button selects the
folder.
Changer mode: DISC Select (DN) Button selects a disc
in descending order.
4 VOLUME 8 / 9 Button
Increase or decreases the volume level.
5 RETURN Button
DVD/Video CD (PBC ON) mode: Returns to the previous
display. (Does not return in some discs.)
6 g Button
Radio mode: SEEK (DN) button
CD/Changer mode:
Press the button to go back to the
beginning of the current track. Press and
hold to fast reverse.
MP3/WMA mode:
Press the button to go back to the
beginning of the current file. Press and
hold to fast reverse.
DVD/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for more
than 1 second to reverse the disc at
double speed. Hold for more than 5
seconds to reverse the disc at 8 times the
normal speed.
54-EN
$ AUDIO Button
DVD/Video CD mode: Switches audio.
% BAND Button
Radio mode:
Changer mode:
Changes the band.
Switches the Changer mode.
& A.PROC Button
Press the button to call the audio processor mode.
( MUTE Button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
) UP Button
Radio mode: Selects, in ascending order, stations
programmed into the radio's presets.
MP3/WMA mode:
Folder Select (UP) Button to selects the folder.
Changer mode:
DISC Select (UP) Button selects a disc in
ascending order.
~ 8, 9, ;, :
Selects an item displayed in the screen.
Audio processor mode: Selects the mode
+ ENT. Button
Enters the selected item.
Audio processor mode: Enters the mode
, f Button
Radio mode: SEEK (UP) button
CD/Changer mode:
Press the button to advance to the
beginning of the next track. Press and hold
to fast forward.
MP3/WMA mode:
Press the button to advance to the
beginning of the next file. Press and hold to
fast forward.
DVD/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for
more than 1 second to forward the disc
at double speed. Hold for more than 5
seconds to forward the disc at 8 times
the normal speed.
• When pressed and held in while in the
pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.
• The picture is forwarded by one frame
each time the button is pressed in the
pause mode.
2
Replacing the battery
Put the battery in the case with the (+) indication upward
as shown in the illustration.
- Numeric Keypad
Inputs numbers.
. MONITOR Button
Switches the input mode of the connected monitor (sold
separately)
/ ANGLE Button
DVD mode: Switches the angle of the picture.
: SUBTITLE button
• Placing a battery in backwards way may cause a malfunction.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
DVD mode: Switches the subtitle.
• If you use a remote control other than the supplied one, some
operations may not be performed.
When Using the Remote Control
• Point the remote control at the remote sensor within
about 2 meters.
• It may not be possible to operate the remote control
if the remote control sensor is exposed to direct
sunlight.
• The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Battery Replacement
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
Battery type: CR2025 battery or equivalent.
1
Opening the battery case
Slide out the battery cover while firmly pressing in the
direction of the arrow.
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
Connectable to Remote Control Interface Box
You can operate this unit from the vehicle's control unit when
an Alpine Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
55-EN
In addition, DVDs offer a variety of functions.
Information
• Multiple audio* (page 18)
Movies can be recorded in up to eight languages. The
desired language can be selected from the remote control.
About DVDs
• Subtitles function* (page 19)
Music CDs and DVDs have grooves (tracks) in which the
digital data is recorded. The data is represented as
microscopic pits recorded into the track – these pits are read
by a laser beam to play the disc. On DVDs, the density of the
tracks and pits is twice that of CDs, so DVDs can contain more
data in less space.
Movies can include subtitles in up to 32 languages. The
desired subtitle language can be selected from the remote
control.
• Multi angle function* (page 18)
When the DVD contains a movie shot from multiple angles,
the desired angle can be selected from the remote control.
• Multi story function*
CDs
Minimum pit
length 0.9 µm
1.2 mm
Track pitch 1.6 µm
DVDs
Minimum pit
length 0.9 µm
0.6 mm
0.6 mm
Track pitch 0.74 µm
A 12 cm disc can contain one movie or about four hours of music.
In addition, DVDs provide sharp picture quality with vivid colors
thanks to a horizontal resolution of over 500 lines (compared to less
than 300 for VHS tape). With the addition of an optional, digital audio
processor (PXA-H900, PXA-H701 etc.), you can recreate the power
and presence of a movie theater with Dolby Digital 5.1-channel
Surround.
56-EN
With this function, a single movie includes various story
lines. You can select different story lines to view various
versions of the same movie.
Operation differs from disc to disc. Story line selection
screens including instructions appear during the movie.
Just follow the instructions.
* The functions, audio languages, subtitle languages, angles, etc.,
differ from disc to disc. For details, refer to the disc’s instructions.
Terminology
Dolby Digital
Dolby Digital is a digital audio compression technology
developed by Dolby Laboratories that allows large quantities
of audio data to be efficiently recorded on discs. It is
compatible with audio signals from mono (1 channel) all the
way up to 5.1-channel surround sound. The signals for the
different channels are completely independent, and since the
sound is high quality digital there is no loss of sound quality.
* The separately sold digital audio processor (PXA-H900, PXAH701 etc.) is required to enjoy full 5.1-channel surround sound.
The DVA-9965 performs Dolby Digital decoding when it
outputs analog audio signals; 2-channel audio, not 5.1channel.
Dolby Pro Logic
Dolby Pro Logic is the technology used to decode programs
encoded in Dolby Surround. Pro logic decoding will provide
you with four channels of sound (front left/right, centre and
monaural rear surround) from a 2-channel (stereo) source.
* The separately sold digital audio processor (PXA-H900) is
required to enjoy Dolby Pro Logic surround sound.
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels over
the entire frequency range.
This is done with an advanced, high sound quality matrix
surround decoder which draws out the spatial properties of the
original recording without adding any sounds to or changing
the sound of the source.
* The separately sold digital audio processor (PXA-H701 etc.) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
Center
speaker
LPCM is a signal recording format used for music CDs.
Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDs
are recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby
achieving higher sound quality than music CDs.
Rating levels (parental lock)
Front
speakers
Rear
speakers
This is a DVD function for restricting the viewing age as
stipulated by censorship laws in different countries. The way
in which viewing is restricted differs from DVD to DVD.
Sometimes the DVD cannot be played at all, other times
certain scenes are skipped, and other times certain scenes
are replaced with other scenes.
Subwoofer
Speaker layout for enjoying
Dolby Digital sound/dts sound
DTS
This is a home-use digital sound format of the DTS Sound
System. This is a high quality sound system, developed by
Digital Theater Systems, Inc. for use in movie theatres.
DTS has six independent sound tracks. The theater
presentation is fully realized in the home, etc. DTS is the
abbreviation for Digital Theater System.
* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H900, PXA-H701 etc.). The DVD
video software must also have a DTS sound track.
The DVA-9965 has a built-in DTS 2-channel audio decoder.
Analog audio outputs are available.
57-EN
List of Language Codes
(For details, see page 32.)
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
58-EN
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Abbreviation
IE
IK
IN
IS
IT
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZH
ZU
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
List of Country Codes
(For details, see page 33.)
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
Country
Abbreviation
DM
Andorra
DO
United Arab Emirates
DZ
Afghanistan
EC
Antigua and Barbuda
EE
Anguilla
EG
Albania
EH
Armenia
ER
Netherlands Antilles
ES
Angola
ET
Antarctica
FI
Argentina
FJ
American Samoa
FK
Austria
FM
Australia
FO
Aruba
FR
Azerbaijan
GA
Bosnia and Herzegovina
GB
Barbados
GD
Bangladesh
GE
Belgium
GF
Burkina Faso
GH
Bulgaria
GI
Bahrain
GL
Burundi
GM
Benin
GN
Bermuda
GP
Brunei Darussalam
GQ
Bolivia
GR
Brazil
GS
Bahamas
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic
Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote d’lvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Country
Abbreviation
Dominica
KI
Dominican Republic
KM
Algeria
KN
Ecuador
KP
Estonia
Egypt
KR
Western Sahara
KW
Eritrea
KY
Spain
KZ
Ethiopia
LA
Finland
Fiji
LB
Falkland Islands
LC
Micronesia, Federated States of
LI
Faroe Islands
LK
France
LR
Gabon
LS
United Kingdom
LT
Grenada
LU
Georgia
LV
French Guiana
LY
Ghana
MA
Gibraltar
MC
Greenland
MD
Gambia
MG
Guinea
MH
Guadeloupe
MK
Equatorial Guinea
ML
Greece
MM
South Georgia and the
MN
South Sandwich Islands
MO
Guatemala
MP
Guam
MQ
Guinea-Bissau
MR
Guyana
MS
Hong Kong
MT
Heard Island and
MU
McDonald Islands
MV
Honduras
MW
Croatia
MX
Haiti
MY
Hungary
MZ
Indonesia
NA
Ireland
NC
Israel
NE
India
NF
British Indian Ocean Territory
NG
Iraq
NI
Iran, Islamic Republic of
NL
Iceland
NO
Italy
NP
Jamaica
NR
Jordan
NU
Japan
NZ
Kenya
OM
Kyrgyzstan
PA
Cambodia
Code
7573
7577
7578
7580
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao People’s
Democratic Republic
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
Continued
59-EN
Abbreviation
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
60-EN
Code
8069
8070
8071
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Country
Abbreviation
Peru
SJ
French Polynesia
SK
Papua New Guinea
SL
Philippines
SM
Pakistan
SN
Poland
SO
Saint Pierre and Miquelon
SR
Pitcairn
ST
Puerto Rico
SV
Portugal
SY
Palau
SZ
Paraguay
TC
Qatar
TD
Reunion
TF
Romania
TG
Russian Federation
TH
Rwanda
TJ
Saudi Arabia
TK
Solomon Islands
TM
Seychelles
TN
Sudan
TO
Sweden
TP
Singapore
TR
Saint Helena
TT
Slovenia
TV
Code
8374
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
8471
8472
8474
8475
8477
8478
8479
8480
8482
8484
8486
Country
Abbreviation
Svalbard and Jan Mayen
TW
Slovakia
TZ
Sierra Leone
UA
San Marino
UG
Senegal
UM
Somalia
US
Suriname
UY
Sao Tome and Principe
UZ
El Salvador
VA
Syrian Arab Republic
VC
Swaziland
Turks and Caicos Islands
VE
Chad
VG
French Southern Territories
VI
Togo
VN
Thailand
VU
Tajikistan
WF
Tokelau
WS
Turkmenistan
YE
Tunisia
YT
Tonga
YU
East Timor
ZA
Turkey
ZM
Trinidad and Tobago
ZW
Tuvalu
Code
8487
8490
8565
8571
8577
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items in
the following checklist. This guide will help you isolate the problem
if the unit is at fault. Otherwise, make sure the rest of your system is
properly connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not
operate with the vehicle's ignition off.
• Improper power lead (Red) and battery lead (Yellow)
connections.
- Check power lead and battery lead connections.
• Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
• Internal micro-computer malfunctioned due to interference
noise etc.
- Press the RESET switch with a ballpoint pen or other
pointed article.
• Blackout mode is activated.
- Cancel Blackout mode.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace
the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
CD/MP3/WMA/DVD/Video CD
Disc Player not functioning.
• Out of operating temperature range +50˚C (+120˚F) for CD.
- Allow the vehicle's interior (or trunk) temperature to cool.
Disc playback sound is wavering.
• Moisture condensation in the disc unit.
- Allow enough time for the condensation to evaporate (about 1
hour).
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Re-insert the disc following the instructions in the “loading
and unloading discs” section.
Unable to fast forward or reverse the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your
unit can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• The disc is very dirty.
- Clean the disc.
• The disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc.
Consult your nearest Alpine dealer.
Disc playback sound skips without vibration.
• The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
Error displays
• Mechanical error
- Press c. After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest Alpine dealer.
MP3 or WMA is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” on pages 14-15, then rewrite in
the format supported by this device.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
No picture is produced.
• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor’s parking brake cord is not connected.
- Connect the monitor’s parking brake cord and set the parking
brake. (For details, refer to the monitor’s instructions.)
• Monitor’s parking brake is not set.
- Connect the monitor’s parking brake cord and set the parking
brake. (For details, refer to the monitor’s instructions.)
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing
upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to playback with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
Continued
61-EN
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be unclear, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
• Monitor’s fluorescent tube is worn out.
- Replace the monitor’s fluorescent tube.
Image stops sometimes.
• Disc is scratched.
- Replace with a non-scratched disc.
Indication for CD Player
HI TEMP
• Protective circuit is activated due to high temperature.
- The indicaton will disappear when the temperature returns to
normal operating range.
Indication for DVD/Video CD Player
DISC ERROR
(Audio display)
(Monitor display)
• Mechanism error.
1) Press c and eject the disc.
If the disc does not eject, press c again for at least 2
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press c
again.
If the error indication still does not turn off after pressing
c a few times, consult your Alpine dealer.
NO DISC
NO DISC
(Audio display)
NO DISC
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the
unit does not start to play or eject the disc.
- Remove the disc by following these steps:
Press the c button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
ERROR
(Monitor display)
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the
unit does not start to play or eject the disc.
- Remove the disc by following step:
Press c again for at least 2 seconds.
ERROR
• Mechanism error.
1) Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
c button again.
If the error indication still does not turn off after pressing
the c button for a few times, consult your Alpine dealer.
• When “ERROR” is displayed:
If that the disc cannot be ejected by pressing c, press the RESET
switch (refer to page 8) and press c again.
If the disc still cannot be ejected, consult your Alpine dealer.
(Monitor display)
• Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
ERROR
REGIONAL CODE
VIOLATION
(Audio display)
PROTECT
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
(Monitor display)
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
UNSUPPORT
• The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
HI-TEMP
HI TEMP
(Audio display)
(Monitor display)
• Protective circuit is activated at high temperature.
- The indicaton will disappear when the temperature returns to
normal operating range.
- Leave the power OFF until the temperature decreases and
then turn the power ON again.
62-EN
ERROR - 02
LOADING ERROR
ERROR
(Audio display)
EJECT ERROR
• A disc is left inside the CD Changer.
- Press the eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
NO MAGZN
(Monitor display)
• Mechanism error.
1) Press c and eject the disc.
If the disc does not eject, press c again for at least 2
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press c
again.
If the error indication still does not turn off after pressing
c a few times, consult your Alpine dealer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
• No indicated disc.
- Choose another disc.
Indication for SAT Receiver Mode
ANTENNA
VIDEO SIGNAL SYSTEM IS
NOT CORRECT
ERROR
(Audio display)
(Monitor display)
• PAL disc is loaded.
- Load an NTSC disc.
Indication for CD Changer
HI TEMP
• Protective circuit is activated due to high temperature.
- The indicaton will disappear when the temperature returns to
normal operating range.
ERROR - 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not
eject, consult your Alpine dealer.
• The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
UPDATING
(XM mode)
CALL 888-539SIRIUS TO
SUBSCRIBE
(SIRIUS mode)
Scrolling display
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
NO SIGNAL
ACQUIRING
SIGNAL
(XM mode)
(SIRIUS mode)
Scrolling display
• XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
LOADING
(XM mode)
ACQUIRING
SIGNAL
(SIRIUS mode)
Scrolling display
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
OFF AIR
(XM mode)
ACQUIRING
SIGNAL
(SIRIUS mode)
Scrolling display
• The channel currently selected has stopped broadcasting.
- Select another channel.
63-EN
––––––––
• The user has selected a channel number that does not exist or
is not subscribed to.
- The unit will revert back to the previously selected channel.
• There is no artist name/feature, song/program title, or
additional information associated with the channel at that time.
- No action needed.
Indication for iPod Mode
NO IPOD
• The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
“Connections”).
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
NO FILE
• There are no songs in the iPod.
- Download songs to the iPod and connect to the adapter.
ERROR-01
• Communication error
- Turn the ignition key off, and then set to ACC or ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod cable.
ERROR-02
• Caused by the iPod Software Version not being compatible
with the optional adapter KCA-420i.
- Refer to the Owner’s Manual of the optional adapter KCA420i, and update the iPod Software Version to be compatible
with the optional adapter KCA-420i.
Specifications
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
HD Radio Tuner
<FM>
Tuning Range
Usable Sensitivity
Signal-to-Noise Ratio
Stereo Separation
Total Harmonic Distortion
<AM>
Tuning Range
Usable Sensitivity
Signal-to-Noise Ratio
Stereo Separation
Total Harmonic Distortion
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
PICKUP
Wave length
Laser power
REMOTE CONTROL
Battery Type
Width
Height
Depth
Weight
GENERAL
Power Requirement
Maximum Pre-Output Voltage
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
87.7 – 107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
80 dB
45 dB
2.0 dB
530 – 1,710 kHz
22.5 µV/27 dB
87.7 – 107.9 MHz
–88 dBm (BER 1 × 10-5)
85 dB
80 dB
0.08% (at 1 kHz)
530 – 1,710 kHz
21 dB/µV (BER 1 × 10-5)
80 dB
75 dB
0.08% (at 1 kHz)
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
90 dB (at 1 kHz)
NTSC
500 lines or greater
1Vp-p (75 ohms)
DVD: 70 dB
115 dB
DVD: 665nm
CD: 785nm
CLASS II
CR2025 battery
51 mm (2")
119 mm (4-11/16")
13 mm (1/2")
40 g (1.4 oz) (battery excluded)
14.4 V DC
(11–16 V allowable)
4 V/10 k ohms
1.65 kg (3 lbs. 10 oz)
178 mm (7")
50 mm (2")
160 mm (6-1/4")
170 mm (6-3/4")
46 mm (1-13/16")
19 mm (3/4")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of player)
64-EN
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 3 to 4 of this manual thoroughly
for proper use.
Warning
MAKE THE CORRECT CONNECTIONS.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Failure to make the proper connections may result in fire or
product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR GEARSHIFT.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your DVA-9965. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for
this unit. When connecting the DVA-9965 to the fuse box,
make sure the fuse for the intended circuit of the DVA-9965
has the appropriate amperage. Failure to do so may result in
damage to the unit and/or the vehicle. When in doubt, consult
your Alpine dealer.
• The DVA-9965 uses female RCA-type jacks for connection to
other units (e.g. amplifier) having RCA connectors. You may
need an adaptor to connect other units. If so, please contact
your authorized Alpine dealer for assistance.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
65-EN
Connect each input lead coming from an amplifier
or equalizer to the corresponding output lead
coming from the left rear of the DVA-9965. Connect
all other leads of the DVA-9965 according to details
described in the CONNECTlONS section.
Installation
Accessory List
• Head unit ........................................................................ 1
• Power Supply box .......................................................... 1
• Power cable .................................................................... 1
• S video cable .................................................................. 1
• RCA extension cable (for video signal) ....................... 1
• Mounting sleeve ............................................................. 1
• Screw (M5 × 8) ................................................................ 4
• Flange-head tapping screw (M4 × 14) .......................... 4
• Velcro Fasteners ............................................................ 2
• Front frame ..................................................................... 1
• Remote Control .............................................................. 1
• Battery (CR2025) ............................................................ 1
• Carrying case ................................................................. 1
• Owner's Manual ........................................................ 1 set
Metal plate
Detachable
Front panel
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in place.
1
Mounting Sleeve
(Included)
Dashboard
3
Lock Pin
Slide the DVA-9965 into the dashboard. When the
unit is in place, make sure the locking pins are fully
seated in the down position. This can be done by
pressing firmly in on the unit while pushing the
locking pin down with a small screwdriver. This
ensures that the unit is properly locked and will not
accidentally come out from the dashboard. Install
the detachable front panel.
Removal
1 Remove the detachable front panel.
2 Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
3 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
this unit
Front Frame
Slide the mounting sleeve into the dashboard.
2
Screw
Hex Nut (M5)
*2
Screws (M5 × 8)
(Included)
Bolt Stud
this unit
Metal
Mounting
Strap
Ground Lead
*3
*1
this unit
Ground Lead
Chassis
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle’s chassis.
• For the screw marked “*2”, use an appropriate screw for the
chosen mounting location.
66-EN
Mounting Bracket
• Secure the ground lead of the unit to a clean metal spot using a
screw (*3) already attached to the vehicle's chassis.
Installing the Power Supply Unit
Caution
Do not block the unit’s fan or heat sink, thus preventing air
circulation. If blocked, heat will accumulate inside the unit
and may cause a fire.
Air ventilation hole
<Side of the Power Supply Unit>
When mounting with Velcro fasteners
When mounting the Power Supply Unit with the Velcro
fasteners, be sure to choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear
deck with the Velcro fasteners.
1
Remove the Protective paper and attach two pieces
of Velcro fastener to the bottom of the Power
Supply Unit.
Power Supply Unit
Protective paper
Protective paper
2
Velcro Fasteners
(Included)
Check the position, and then fix the Power Supply
Unit to the floor carpet.
When mounting with Screws
When mounting the Power Supply Unit with the screws, be sure
to choose a flat location.
When making holes, be careful not to scratch any pipes or wires.
Install the Power Supply Unit on the floor with the
supplied flange-head tapping screws (M4 × 14).
Flange-head tapping screws
(M4 × 14) (Included)
Power Supply Unit
67-EN
Connections
Antenna
1
POWER ANT
2
REMOTE
TURN-ON
3
AUDIO
INTERRUPT IN
4
ILLUMINATION
5
Blue
Blue/White
Pink
To power antenna
To amplifier or equalizer
To vehicle phone
Orange
Red
8
Yellow
Black
IGNITION
6
BATTERY
7
GND
9
To the instrument cluster illumination
lead
Ignition Key
Battery
M.CONT
(Front)
!
(Rear)
"
(Front)
#
(Rear)
$
(White/Pink)
M.CONT
To monitor control lead
(White/Pink)
REMOTE IN
(White/Brown)
REMOTE IN
To remote output lead
(White/Brown)
(Yellow)
&
To Video Input terminal
(White) L
(Red) R
(
To Audio Input terminal (R, L)
)
~
+
,
/
.
<
Speakers
Front Left
:
Amplifier
*
2
Front Right
;
3WAY
*1
F/R/Sub-W
<
Rear Left
Amplifier
=
Rear Right
<
Amplifier
>
CD Changer
(Sold Separately)
Power Supply Box
%
:
*1 The label is attached on the bottom of the unit.
*2 Caution about Power cable.
Use the power cable supplied with the unit.
Do not use a power cable that is not supplied with the unit.
68-EN
Subwoofers
1 Antenna Receptacle
2 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.
3 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
4 Audio Interrupt In Lead (Pink)
5 Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
the unit to dim whenever the vehicle’s lights are turned on.
6 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
7 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
8 Fuse Holder (7.5A)
9 Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
! Monitor Control Lead (Front) (White/Pink)
Connect this to the Monitor Control Lead of the touch panel
compatible front monitor.
" Monitor Control Lead (Rear) (White/Pink)
Connect this to the Monitor Control Lead of the touch panel
compatible rear monitor.
# Remote Control Input Lead (Touch panel compatible
front monitor) (White/Brown)
Connect this to the remote control output lead for the touch
panel compatible front monitor.
& Video Output Connector (Yellow)
Output the video
( Audio Output Connectors
RED is right and WHITE is left output the audio.
) Front Output RCA Connectors
RED is right and WHITE is left.
~ Rear Output RCA Connectors
RED is right and WHITE is left.
+ Subwoofer RCA Connectors
RED is right and WHITE is left.
, S Video output terminal
Outputs the video signal.
Connect a monitor that has a S video input terminal.
- Digital Output Terminal (Optical)
Use when combining fiber digital input compatible products.
. Remote Control Eye Jack
If a monitor other than Alpine is installed, it can still be
controlled by the supplied remote control by installing the
optional remote control eye (KRE-500E).
/ Steering Remote Control Interface Connector
To steering remote control interface box.
: Power Supply Connector
; Setting the 3WAY/2WAY switch
Set the 3way/2way switch according to your audio system.
< RCA Extension Cable (sold separately)
= Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, INTERFACE ADAPTER
FOR iPod™* etc.) equipped with Ai-NET.
* When connecting iPod, INTERFACE ADAPTER FOR iPod™
(KCA-420i) is required. For details on how to connect, refer to
the Owner’s Manual of KCA-420i.
• You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) to this component.
> Ai-NET Cable (Included with CD Changer)
$ Remote Control Input Lead (Rear) (White/Brown)
Connect this to the remote control output lead for the rear
monitor.
• If the optional remote control eye (KRE-500E) is connected, the
remote control signal cannot be received.
% Power Supply Box
• Do not install the Power Supply Box at a location subjected to
water such as under the floor mat or air conditioner. This may
cause a malfunction.
• Do not bundle the Power Supply Box cable with other audio
cables. Doing so may induce noise into your system.
• Keep the Power Supply Box converter away from the Antenna
cables and the rear side of the unit, otherwise noise may be
generated when receiving radio broadcast.
69-EN
System Example
Connect the External Monitor
The following example shows a system connection using the S-Video output to a front monitor with S-Video input and a touch panel compatible
rear monitor.
M.CONT
(Rear)
REMOTE IN
(Rear)
1
M.CONT
2
REMOTE OUT
(White/Pink)
(White/Pink)
(White/Brown)
(White/Brown)
4
To Video Input
terminal
6
5
Touch panel
compatible monitor
(sold separately)
7
To Audio Input
terminal
3
1 Monitor Control Lead (Rear) (White/Pink)
Connect this to the Monitor Control Lead of the touch panel
compatible rear monitor.
2 Remote Control Input Lead (Rear) (White/Brown)
Connect this to the remote control output lead for the rear
monitor (Alpine’s).
Monitor with S
terminal
(sold separately)
3 S video cable (Included)
4 Video Output connectors (Yellow)
5 Audio Output connectors
6 RCA Extension Cable (Included)
7 RCA Extension Cable (Sold separately)
Connect the Ai-NET compatible audio processor (Fiber digital compatible) and changer
1
Fiber optic cable
Fiber digital Input terminal
(for head unit)
Audio processor (Ai-NET)
(Fiber digital compatible)
(sold separately)
4
3
Fiber digital Input terminal
(for changer)
3
*
Fiber optic cable
Ai-NET cable
Ai-NET
2 cable
CD changer (Ai-NET)
(sold separately)
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
1
* Only connect fiber digital
compatible CD changer
1 Fiber optic Cable (Sold Separately)
2 Ai-NET Cable (Included with CD Changer)
3 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
4 Ai-NET Cable (Included with Audio Processor)
70-EN
The X-Over Switch position for a two-way system
(frequency range is divided between highs for front/rear and
lows for the Subwoofer).
The position of the X-Over switch: F/R/Sub-W
The X-Over Switch position for a three-way system whose
frequency range is divided among the highs (Front), mids
(Rear), and lows (Subwoofer).
The position of the X-Over switch: 3WAY
Front high range
speaker (L)
Front high range
speaker (R)
High range
speaker (L)
High range
speaker (R)
Rear high range
speaker (L)
Rear high range
speaker (R)
Mid range
speaker (L)
Mid range
speaker (R)
Low range
speaker (L)
Low range
speaker (R)
Low range
speaker (L)
Low range
speaker (R)
Output of this unit :
Front output
Rear output
Subwoofer output
• Use RCA-Type cables to connect the Subwoofer ouput to an amplifier driving the low range speakers.
• You cannot adjust the fader when set to 3WAY.
To prevent noise/interference in the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
71-EN
R
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality
craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any
questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.
[PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related
Accessories ("the product"). Products purchased in the
Canada are covered only in the Canada. Products
purchased in the U.S.A. are covered only in the U.S.A.
3 You must supply proof of your purchase of the product.
4 You must package the product securely to avoid
damage during shipment. To prevent lost packages it is
recommended to use a carrier that provides a tracking
service.
[LENGTH OF WARRANTY:
[HOW WE LIMIT IMPLIED WARRANTIES:
This Warranty only covers the original purchaser of the
product, who must reside in the United States, Puerto Rico
or Canada.
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR
USE AND MERCHANTABILITY ARE LIMITED IN
DURATION TO THE PERIOD OF THE EXPRESS
WARRANTY SET FORTH ABOVE AND NO PERSON IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE OF THE
PRODUCT.
[WHAT IS COVERED:
[HOW WE EXCLUDE CERTAIN DAMAGES:
This Warranty is in effect for one year from the date of the
first consumer purchase.
[WHO IS COVERED:
This Warranty covers defects in materials or workmanship
(parts and labor) in the product.
[WHAT IS NOT COVERED:
This Warranty does not cover the following:
1 Damage occurring during shipment of the product to
Alpine for repair (claims must be presented to the
carrier).
2 Damage caused by accident or abuse, including burned
voice coils caused by over-driving the speaker (amplifier
level is turned up and driven into distortion or clipping).
Speaker mechanical failure (e.g. punctures, tears or
rips). Cracked or damaged LCD panels. Dropped or
damaged hard drives.
3 Damage caused by negligence, misuse, improper
operation or failure to follow instructions contained in the
Owner's manual.
4 Damage caused by act of God, including without
limitation, earthquake, fire, flood, storms or other acts of
nature.
Any cost or expense related to the removal or
reinstallation of the product.
5 Service performed by an unauthorized person, company
or association.
6 Any product which has the serial number defaced,
altered or removed.
7 Any product which has been adjusted, altered or
modified without Alpine's consent.
8 Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
9 Any product not purchased from an Authorized Alpine
Dealer.
[HOW TO OBTAIN WARRANTY SERVICE:
1 You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair
and for payment of any initial shipping charges. Alpine
will, at its option, repair or replace the product with a
new or reconditioned product without charge. If the
repairs are covered by the warranty, and if the product
was shipped to an Authorized Alpine Service Center or
Alpine, Alpine will pay the return shipping charges.
2 You should provide a detailed description of the
problem(s) for which service is required.
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES
CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL
DAMAGES" REFERS TO EXPENSES OF
TRANSPORTING THE PRODUCT TO THE ALPINE
SERVICE CENTER, LOSS OF THE ORIGINAL
PURCHASER'S TIME, LOSS OF THE USE OF THE
PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF
THE PRODUCT. THE TERM "CONSEQUENTIAL
DAMAGES" REFERS TO THE COST OF REPAIRING OR
REPLACING OTHER PROPERTY WHICH IS DAMAGED
WHEN THIS PRODUCT DOES NOT WORK PROPERLY.
THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
[HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may
also have other rights which vary from state to state and
province to province. In addition, some states/provinces do
not allow limitations on how long an implied warranty lasts,
and some do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not
apply to you.
[IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio
product has been installed in your vehicle by an Authorized
Installation Center, and this warranty stamped upon
installation by the installation center.
[HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO 1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
Download PDF

advertising