+01GB00IVAD105.book Page 1 Monday, January 15, 2007 4:02 AM
R
EN
Mobile Multimedia Station
IVA-D105
FR
ES
DIGITAL VIDEO
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
YAMAGATA (Wuxi) Co., Ltd.
Block 28-25,Changjiang Nanlu, WND, jiangsu, China
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Designed by ALPINE Japan
Printed in China (Y)
68-08564Z59-A
+01GB01IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 2 Monday, January 15, 2007 4:02 AM
+01GB02IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 1 Monday, January 15, 2007 4:02 AM
ENGLISH
Contents
CD/MP3/WMA/AAC
Playback ..........................................................16
Operating Instructions
WARNING
WARNING ................................................. 5
CAUTION .................................................. 5
PRECAUTIONS ........................................ 6
Repeat Play .....................................................16
M.I.X. (Random Play) ....................................16
Selecting Folders
(concerning MP3/WMA/AAC) ...................16
About MP3/WMA/AAC .................................17
DVD/Video CD
Detaching and Attaching the Front Panel ...... 11
Playing a Disc .................................................19
To display the DVD mode screen ...............19
If a menu screen appears .............................20
Displaying the Top Menu Screen ...............21
Displaying the Menu Screen ......................21
Displaying the Menu Operation Mode
Screen ......................................................21
Searching by Program ....................................21
Initial System Start-Up ................................... 11
Searching by Playlist .....................................21
Turning Power On or Off ............................... 11
Stopping Playback (PRE STOP) ....................21
Opening/Closing the Monitor ........................ 11
Stopping Playback .........................................22
Moving the Monitor to be Flat ....................... 12
Fast-forwarding/Fast-reversing ......................22
Adjusting the Volume ..................................... 12
Finding the Beginnings of Chapters/
Tracks/Files ................................................22
Discs Playable on This Unit ................... 7
Getting Started
Accessory List ................................................ 10
Location of Controls ...................................... 10
Lowering Volume Quickly ............................. 12
How to view the Display ................................ 12
PULSETOUCH™ operation ...................... 12
Recalling the Source ................................... 12
Displaying the Numeric Keypad
Input Screen ............................................. 13
Radio
Listening to the Radio .................................... 14
Manual Storing of Station Presets .................. 14
Automatic Memory of Station Presets ........... 14
Tuning to Preset Stations ................................ 14
Changing the Display
(HD Radio mode only) ............................... 15
Displaying a List of the Program
(HD Radio mode only) ............................... 15
Receiving a Multicast
(HD Radio mode only) ............................... 15
Playing Still Frames (Pausing) .......................22
Forward/reverse frame-by-frame Playback ....22
Slow Motion Playback ...................................22
Selecting Program (SKIP) .............................23
Selecting Playlist (SKIP) ...............................23
Selecting Folders ............................................23
Repeat Playback .............................................23
Searching by Title/Group/Program/Playlist/
Folder Number ............................................24
Searching Directly by Chapter, Track or File
Number .......................................................24
Switching the Angle .......................................25
Scroll to Move the Page Forward or Back .....25
Switching the Audio Tracks ...........................25
Switching the Subtitles (Subtitle Language) .25
Switching from the disc menu ....................25
Displaying the Disc Status for
DVD/Video CD ..........................................26
About DivX® ..................................................26
1-EN
+01GB03IVAD105TOC.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 2 Monday, January 15, 2007 4:02 AM
Other Useful Features
Adjusting the Audio (Adjust the Bass/Treble/
Balance/Fader/Loudness/Subwoofer/
NAV. LEVEL/Defeat) .................................. 26
Search Function .............................................. 27
Rear Selection Function .................................. 28
Switching Display Modes ............................... 28
Switching the Visual Source Only
(Simultaneous Function) ............................. 28
Cancelling the Simultaneous Function ........ 28
Blackout Mode On and Off ............................ 29
Setting rear Camera Interruption .................... 29
Setup
DVD Setup
DVD Setup Operation ..................................... 29
Changing the language setting .................... 30
Setting of the Menu Language .................... 30
Setting of the Audio Language ................... 30
Setting of the Subtitle Language ................. 30
Changing the Country Code Setting ........... 30
Setting the Rating Level (Parental Lock) .... 31
Changing the Digital Output Setting ........... 31
Setting the Downmix Mode ........................ 33
Setting the TV Screen ................................. 33
Setting of the Bonus Code .......................... 33
Setting the DVD-Audio Playback Mode .... 33
Setting the compressed
File Playback Data ................................... 34
Playing MP3/WMA/AAC Data ................... 34
Displaying DivX® Disc Information .......... 34
Setting the Video CD Play Mode ................ 34
RADIO Setup
Digital SEEK Setting
(HD Radio mode only) ................................ 34
GENERAL Setup
General Setup Operation ................................ 35
Displaying the Time .................................... 35
Setting the Time .......................................... 35
Setting Daylight Saving Time ..................... 35
Demonstration Function .............................. 35
Sound (Beep) Guide Function ..................... 35
Setting the Scroll ......................................... 36
Changing the Russian Font ......................... 36
Adjusting the Dimmer of
Button Lighting at Night .......................... 36
SYSTEM Setup
System Setup Operation ................................. 36
Setting the External Device
Interrupt Mode ......................................... 37
Setting the Interrupt Icon Display ............... 37
Switching the function of the
remote sensor ........................................... 37
Setting the Navigation Mode ....................... 37
Setting the Navigation Interruption ............. 37
Setting the AUX Mode ................................ 37
Adjusting the External Input Audio Level .. 38
Setting the USB Adapter to ON/OFF .......... 38
Setting the Rear Camera Input .................... 38
Setting the Picture/Sound Output ................ 38
Setting the Bluetooth Connection
(Bluetooth IN) .......................................... 38
Setting the VISUAL Button ........................ 38
Subwoofer On and Off ................................ 38
Setting the Digital Output ........................... 38
DISPLAY Setup
Display Setup Operation ................................. 39
Adjusting the Monitor Angle ...................... 39
Setting Automatic Opening/Closing of the
Monitor .................................................... 39
Setting the Brightness of the Backlighting .. 39
Adjusting the Minimum Level of
Backlight .................................................. 39
Switching Background Textures ................. 40
Setting Automatic Background Textures .... 40
Switching the Font Background Color ........ 40
Turning the Touch Panel Vibration
ON or OFF ............................................... 40
Adjusting the Touch Panel .......................... 40
VISUAL EQ™
Visual EQ Setting Operation .......................... 41
Selecting the VISUAL EQ Mode
(Maker’s setting) ...................................... 41
Adjusting Brightness ................................... 41
Adjusting Color of Picture .......................... 41
Adjusting Tint of Picture ............................. 41
Adjusting Image Contrast ........................... 41
Adjusting Picture Quality ............................ 42
Storing VISUAL EQ ................................... 42
Data Download
Downloading the BACKGROUND data ........ 42
2-EN
+01GB03IVAD105TOC.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 3 Monday, January 15, 2007 4:02 AM
Adjusting Sound
BassEngine Operation
BassEngine Operation .................................... 43
External Audio Processor Operation
Auxiliary Device (Optional)
Operating Auxiliary Devices (Optional) ........ 51
Changer (Optional)
Controlling CD Changer (Optional) ............... 52
Multi-Changer Selection (Optional) ............... 53
External Audio Processor (Optional) ............. 43
Adjustment Procedure for Dolby Surround .... 44
Setting the Speakers ....................................... 44
Set MX Mode of the External Audio
Processor .................................................... 45
SAT Radio Receiver (Optional)
Receiving Channels with the SAT Receiver
(Optional) .................................................... 53
Tuning in to Categorized Programs ................ 54
X-OVER Adjustment ..................................... 45
Changing the Display ..................................... 54
Performing Time Correction Manually
(TCR) ......................................................... 46
Checking the SAT Radio ID Number ............. 54
Phase Switching ............................................. 47
Receiving Stored Channels ............................. 54
Graphic Equalizer Adjustments ..................... 47
Search Function (XM mode) .......................... 55
Parametric Equalizer Adjustments ................ 47
Search Function (SIRIUS mode) .................... 55
Setting Bass Sound Control ........................... 48
Setting Bass Compressor ............................ 48
Setting Bass Focus ..................................... 48
Speaker Setup ................................................ 48
Selecting the Channel directly ........................ 55
Setting of Dolby Digital ................................ 48
Adjusting the acoustic image
(BI-PHANTOM) ..................................... 49
Mixing bass sound to the rear channel
(REAR MIX) .......................................... 49
Achieving powerful high volume sound
(LISTENING MODE) ............................ 49
Adjusting the speaker levels
(OUTPUT LEVEL) ................................ 49
Setting the Output Channel
(OUTPUT MODE) ................................. 49
Adjusting the DVD Level .............................. 50
Storing Settings in the Memory ..................... 50
Recalling the Preset Memory ...................... 50
Using the Pro Logic II Mode ......................... 50
Linear PCM Setting ....................................... 50
Navigation System (Optional)
Storing Channel Presets .................................. 54
Receiving Weather or Traffic information from
SAT Radio ................................................... 56
Storing the desired Song/Artist
(SIRIUS mode only) ................................... 56
Storing favorite Sports Teams
(SIRIUS mode only) ................................... 56
Receiving the stored information
(SIRIUS mode only) ................................... 56
Offset Playback Function
(SIRIUS mode only) ................................... 57
SIRIUS Setup
SIRIUS Setup Operation ................................ 57
Setting the announcement individually for
a Song / Artist / Sports Team ...................... 57
Setting ON/OFF of all Songs/
Artists Interruption ...................................... 57
Setting the sports team announcement type ... 58
Setting the Sports Team Display .................... 58
Switching the Navigation Screen (Optional) .. 51
Portable Navigation System Operation
(Optional) .................................................... 51
3-EN
+01GB03IVAD105TOC.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 4 Monday, January 15, 2007 4:02 AM
iPod® (Optional)
Playback .......................................................... 58
Searching for a desired Song .......................... 59
Searching by artist name ............................. 59
Direct Search Function ................................... 59
Selecting Playlist/Artist/Album/Genre/
Composer/Podcast ....................................... 59
Random Play Shuffle (M.I.X.) ...................... 60
Repeat Play ..................................................... 60
Remote Control
Controls on Remote Control ........................... 60
When Using the Remote Control .................... 62
Battery Replacement ....................................... 62
Information
About DVDs ................................................... 63
Terminology .................................................... 64
List of Language Codes .................................. 65
List of Country Codes ..................................... 66
In Case of Difficulty ....................................... 68
Specifications .................................................. 72
Installation and
Connections
Warning .................................................. 73
Caution ................................................... 73
Precautions ............................................ 73
Installation ...................................................... 74
Connections .................................................... 76
System Example ............................................. 78
LIMITED WARRANTY
4-EN
+01GB03IVAD105TOC.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 5 Monday, January 15, 2007 4:02 AM
Operating Instructions
WARNING
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to watch
TV/Video while driving a vehicle. Installing this product
incorrectly enables the driver to watch TV/Video while driving.
This may cause a distraction, preventing the driver from looking
ahead, thus causing an accident. The driver or other people could be
severely injured.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity
(+ and -) as instructed. Rupture or chemical leakage from the
battery may cause fire or personal injury.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
5-EN
+01GB04IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 6 Monday, January 15, 2007 4:02 AM
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
New Discs
To prevent the CD from jamming, “DISC ERROR” is displayed if
discs with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Center Hole
Center Hole
New Disc
Moisture Condensation
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Outside
(Bumps)
Bumps
Damaged Disc
Installation Location
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Make sure the IVA-D105 will not be installed in a location
subjected to:
Maintenance
•
•
•
•
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“DISC ERROR” will be displayed on your player if you insert a
disc incorrectly. If “DISC ERROR” continues to be displayed even
though the disc has been inserted correctly, push the RESET switch
with a pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Irregular Shaped Discs
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
DVD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
6-EN
+01GB04IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 7 Monday, January 15, 2007 4:02 AM
Disc Accessories
Discs Playable on This Unit
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause operational problems. We recommend
not using these accessories on discs played in Alpine DVD players.
Playable Discs
The discs listed below can be played on this unit.
Mark (logo)
Recorded content
Disc size
Audio
+
Video
12 cm*
Audio
+
Video
12 cm*
DVD Video
Transparent Sheet
8 cm
Disc Stabilizer
Handling the Detachable Front Panel
DVD Audio
8 cm
• Do not expose to rain or water.
• Do not drop or subject to shock.
• After turning the system off, a slight ghost of the image will
remain temporarily. This is an effect peculiar to LCD technology
and is normal.
• In cold temperature conditions, the screen may lose contrast
temporarily. After a short warm-up period, it will return to
normal.
Alpine products equipped with the Ai-NET bus, connected to the
IVA-D105, can be operated from the IVA-D105. Depending on the
products connected, the functions and displays will vary. For
details, consult your Alpine dealer.
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the IVA-D105. This
has been done for the safety of the driver and passengers.
Audio Processor Adjustments cannot be made if the car is moving.
The car must be parked and the parking brake must be engaged for
the procedure described in the Owner’s Manual to be valid. The
warning “CAN’T OPERATE WHILE DRIVING,” will be
displayed if any attempts are made to perform these operations
while driving.
12 cm
Audio
+
Video
Video CD
8 cm
12 cm
Music CD
Audio
8 cm
(CD single)
* Two-layer DVD disc compatible
• The IVA-D105 draws minimal current even when its power
switch is turned off. If the switched power (ignition) lead of the
IVA-D105 is connected directly to the positive (+) post of the
vehicle's battery, the battery may be discharged.
An SPST (Single-Pole, Single-Throw) switch (sold separately)
can be added to simplify this procedure. Then, you can simply
place it in the OFF position when you leave the vehicle. Turn the
SPST switch back ON before using the IVA-D105. For
connecting the SPST switch, refer to the “Connection Diagram
of SPST Switch (Sold Separately)” (page 75). If the power
(ignition) lead is unswitched, it must be disconnected from the
battery post should the vehicle be left unused for an extended
period of time.
7-EN
+01GB04IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 8 Monday, January 15, 2007 4:02 AM
Discs that cannot be played
DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/
AAC files), photo CDs, etc.
DualDisc
This unit is not compatible with DualDisc.
Using a DualDisc may cause unit malfunction, and may cause disc
damage when the disc is inserted/ejected.
DVD region number (playable region number)
This DVD player will play back any disc whose region number is 1
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
1
ALL
Video CDs
This DVD head unit is compatible with playback control (PBC)
compatible Video CDs (version 2.0).
“PBC” is a function by which you can use menu screens recorded
on the disc to find the scene you want to watch and view various
types of information in dialog style.
Using compact discs (CD/CD-R/CD-RW)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable)
which have been recorded only on audio devices. You can also play
CD-Rs/CD-RWs containing MP3/WMA/AAC formatted audio
files.
Hybrid Audio CD and Data (MP3/WMA/AAC) CD-R/RW
discs:
The IVA-D105 can read either sector on the disc. Choose CD-DA
to play the CD audio section or MP3/WMA/AAC to play the MP3/
WMA/AAC section.*
Multisession CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalized), additional data may be added.
Once this additional data has been recorded, this becomes a
“multisession” CD. The IVA-D105 can only read multisession
DATA Formatted discs (MP3/WMA/AAC files - Not Audio CD
files).
Properly formatted MP3/WMA/AAC Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32
characters) or Joliet (Windows or Macintosh long filenames) file
naming conventions*.
*Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA/AAC files written in a format
compliant with this unit. For details, see pages 17 and 18.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
Tips for making your own CDs
The IVA-D105 plays DVD Video, DVD Audio, Video CD, Audio
CD, DivX® and has a built in MP3/WMA/AAC decoder.
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA/AAC encoded CD-R/
RW files).
What is the difference between an Audio and MP3/WMA/AAC
CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer
3)/WMA (Windows Media Audio)/AAC (Advanced Audio
Coding) is a data file that uses a compression scheme to reduce the
size of the music file.*
8-EN
+01GB04IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 9 Monday, January 15, 2007 4:02 AM
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
Disc terminology
• This unit is compatible discs recorded in the DVD-Video and
DVD-VR, DivX® mode.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format.
• Discs or files utilizing copy protection, may not be playable.
Some recording systems may not properly format copied files to
enable proper playback.
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
• “DTS” and “DTS Digital Surround” are registered trademarks
of DTS, Inc.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, the Apple logo and iPod, and iTunes are trademarks of
Apple Computer, Inc., registered in the U.S. and other
countries.
• HD Radio™ Technology Manufactured Under License From
iBiquity Digital Corporation. iBiquity Digital and the HD
Radio and HD Symbols are trademarks of iBiquity Digital
Corporation. U.S. and Foreign Patents.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson”
• “Supply of this product only conveys a license for private,noncommercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com”
9-EN
+01GB04IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 10 Monday, January 15, 2007 4:02 AM
Getting Started
Accessory List
•
•
•
•
•
•
•
•
•
•
•
•
Head unit .............................................................................1
Power Cable ........................................................................1
Pre OUT/AUX cable.............................................................1
Mounting Sleeve ..................................................................1
Mounting Bracket ................................................................2
Flush Head screw (M4 x 3)..................................................8
Hexagon washer-head screw (M4 x 6)................................4
Front Frame .........................................................................1
Remote Control....................................................................1
Battery (CR2025).................................................................1
Carrying bag .......................................................................1
Owner’s Manual .............................................................1 set
BAND/SAT button
Radio mode: Changes the band.
Visual source (except navigation screen): Changes the
display mode.
Press this button for at least 2 seconds to recall a weather
channel or traffic channel. Note however, this setting can be
made only if the XM or SIRIUS Receiver Box is connected.
Remote Sensor
Point the supplied remote control transmitter towards the
remote sensor within a range of 2 meters.
VISUAL button
Press and hold for at least 2 seconds to recall the VISUAL
selection screen.
If VISUAL is set in “Setting the VISUAL Button” (page 38),
momentarily press to recall the VISUAL selection screen,
and if NAV. is set, momentarily press to recall the navigation
screen.
OPEN/CLOSE/FLAT button
Opens the monitor.
Closes the monitor by pressing and holding for at least 2
seconds.
Press to set the open monitor to the flat position.
button
Ejects a disc.
button
Use this button to remove the front panel.
DISC IN Indicator
Lights up when a disc is inserted in the unit.
Power Indicator
This indicator is lit when power is on.
About the expression of buttons in this Owner’s
Manual
• The buttons on this unit are expressed in bold (e.g. SOURCE/
). The touch buttons on the display are expressed in bold with
[ ] (e.g. [BAND]).
Connectable to Remote Control Interface Box
You can operate this unit from the vehicle’s control unit when an
Alpine Remote Control Interface Box (optional) is connected. For
details, contact your Alpine dealer.
Location of Controls
Rotary encoder/MUTE/AUDIO
Adjust the volume by turning to the left or right.
Turns the Mute mode on or off by pressing repeatedly.
If pressed and held for at least 2 seconds, the audio setup
screen is displayed.
SOURCE/
button
Turns the power on. Press and hold for at least 2 seconds to
turn the power off.
Monitor open: Recalls the SOURCE selection screen.
Monitor closed: Changes the source.
10-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 11 Monday, January 15, 2007 4:02 AM
Detaching and Attaching the Front Panel
Detaching
1
2
3
Turn off the unit power.
Press (Release) at the lower right side until the
front panel pops out.
Grasp the right side of the front panel and pull it out.
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Press SOURCE/
to turn on the unit.
• The unit can be turned on by pressing any button on the unit except
OPEN/CLOSE, FLAT and
(Eject).
2
Press and hold SOURCE/
turn off the unit.
for at least 2 seconds to
• Some operation of the unit cannot be performed while the vehicle is
in motion. In this case, be sure to first stop your vehicle and apply the
parking brake, then perform the operation.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying bag.
Attaching
1
2
Opening/Closing the Monitor
1
Press OPEN.
The unit beeps 3 times and opens the monitor automatically.
Insert the left side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Push the right side of the front panel until it locks
firmly into the main unit.
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Immediately after installing or applying power to the unit, it should be
initialized. To do this, first, remove the detachable front panel. Behind
the front panel, to the left of the connector, there is a small hole. Using a
pencil or other pointed object, press the RESET switch mounted behind
this hole to complete the initialization procedure.
2
Press and hold OPEN (CLOSE) for at least 2
seconds.
The unit beeps 3 times and closes the monitor
automatically.
• Opening/closing the monitor should never be performed manually. It
may cause a malfunction.
• The monitor's angle is set to 90 degrees at the factory. Depending on
the car, the monitor may hit the dashboard when opened. The
monitor’s angle can be adjusted and stored in memory so that the
monitor will not hit the dashboard when opening. For adjusting the
monitor, refer to “Adjusting the Monitor Angle” on page 39.
Even when the vehicle’s battery power is removed, the adjusted
monitor angle remains stored in memory.
• The IVA-D105 is a precision device. With gentle handling, its unique
capabilities can be enjoyed for a long time.
• If the monitor touches anything while it is being opened (or closed),
the monitor will stop opening (or closing) immediately. Should this
occur, remove the obstacle and press and hold OPEN for at least 2
seconds again to lower the monitor.
• When the movable monitor is opened, do not place any object on the
monitor and be careful not to bump or apply any pressure to the
monitor while it is open. This can cause damage to the mechanism.
• In low ambient temperature conditions, the display may be dark for a
short period of time immediately after the power is turned on. Once
the LCD has warmed up, the display returns to normal.
• For your safety, some operation of the unit cannot be performed
while the vehicle is in motion. In this case, first stop the vehicle and
engage the parking brake, then perform the operation.
• Any of the buttons does not function while the monitor is closing by
reset.
11-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 12 Monday, January 15, 2007 4:02 AM
Moving the Monitor to be Flat
When you want to operate some function on the car (air conditioner,
etc.) which is hidden by the raised monitor, use this function.
1
When the monitor is open, press OPEN (FLAT).
The monitor moves to the flat position.
2
Recalling the Source
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Press SOURCE/
.
The SOURCE selection screen is displayed.
Display example for SOURCE selection screen
Press OPEN (FLAT) again.
The monitor returns to the previous angle.
• The monitor returns to the previous angle 10 seconds after being
moved to the flat position.
• If an excessive force is added to the monitor when the monitor is flat,
putting an object on the back of the monitor for example, it may
cause a malfunction.
Adjusting the Volume
Adjust the volume by turning the Rotary encoder.
Volume: 0 - 35
Lowering Volume Quickly
Activating this function will instantly lower the volume level by 20 dB.
Press MUTE (Rotary encoder) to activate the MUTE
mode.
Displays source modes that can be selected.
Changes to the Rear Selection screen when “Setting the
Picture/Sound Output” (page 38) is set to ON.
Returns to the previous screen.
• The kind of source modes that are displayed varies depending on
connection and setting.
• When the source icon is not displayed on SOURCE Selection screen,
it is displayed on the next page.
Touching [NEXT] on the SOURCE Selection Screen will display the
next page; touching [PREV.] will return to the previous page.
The audio level decreases by about 20 dB.
Pressing MUTE (Rotary encoder) again brings the audio back to
its previous level.
How to view the Display
PULSETOUCH™ operation
The display unit is equipped with onscreen, tactile feedback
(PULSETOUCH™).
What is the tactile feedback (PULSETOUCH™) ?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
• To protect the display, touch the onscreen button with the tip of your
finger.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
• If you touch two buttons at the same time, a malfunction may occur.
Onscreen buttons are expressed as follows in this Owner’s
Manual.
• Onscreen buttons are shown in bold, enclosed in [ ] (e.g.
[BAND]).
12-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 13 Monday, January 15, 2007 4:02 AM
2
Touch [RADIO].
The screen changes to the Radio mode main display.
Main screen example for FM Radio mode
Displaying the Numeric Keypad Input
Screen
The numeric keypad input screen is displayed when the DVD or Video
CD mode is selected for searching a title or chapter, and for entering a
country code or password for the DVD setup item, and also when
selecting a channel number in the SAT Radio mode.
1
2
Touch [10KEY] on the main source screen.
Touch the desired numeric key.
Display example for numeric keypad
Displays the source name, such as radio band, etc.,
that is selected
Working state indicator
Displays volume level
Function Guide:
The function guide display varies depending on each
source.
Touching [PAGE1/2]* or [PAGE1/3]* on the function guide
will change the contents of the function guide, allowing for
many other operations to be performed.
Input screen area
Closes numeric keypad input screen
All input numbers will be deleted
Previous number will be deleted
Input number is confirmed
Numeric keypad
The numeric keypad input screen closes when the area
is touched while displayed.
Displays time
Change to SETUP selection screen.
* Display may vary depending on the connected devices.
• When an optional DVD player or DVD changer compatible with
Ai-NET is connected, AUX appears as “DVD” or “DVD-CHG” in
the display.
• When both the optional DVD player and DVD changer compatible
with Ai-NET are connected, AUX appears as “DVD” and DVD
changer as “DVD-CHG” in the display.
3
3
Touch [ENT] to confirm your entry.
Press SOURCE/ on the unit to change the screen
to another source.
• Pressing VISUAL on the unit will change to the VISUAL selection
screen.
Set to VISUAL in “Setting the VISUAL Button” (page 38).
13-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 14 Monday, January 15, 2007 4:02 AM
Manual Storing of Station Presets
Radio
1
Display example for FM Radio main screen
2
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
Touch [PAGE1/2]* to change the function guide.
* “[PAGE 1/3]” is displayed in the HD Radio mode.
3
Touch and hold any one of the preset buttons [P-1]
through [P-6] for at least 2 seconds.
The selected station is stored.
4
Displays the preset number/frequency.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
This unit cannot receive HD Radio™ signals (digital
terrestrial radio). In order to activate the digital radio
functions described below, an optional HD Radio Tuner
module must be connected through the Ai-NET bus.
Press SOURCE/
A total of 18 stations can be stored in the preset memory (6
stations for each band; FM1, FM2 and AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Listening to the Radio
1
Repeat the procedure to store up to 5 other stations
onto the same band.
Automatic Memory of Station Presets
.
The SOURCE selection screen is displayed.
Receiving Analog Radio:
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
2
Touch [RADIO].
After selecting the desired band, touch [A.MEMO].
The radio mode is activated and the display changes to the
Radio Mode screen.
Receiving HD Radio (if TUA-T500HD is connected):
The tuner automatically seeks and stores 6 strong stations into
[P-1] to [P-6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P-1].
2
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
Touch [HD RADIO].
The digital radio mode is activated and the display changes
to the HD Radio Tuner Mode screen.
3
Touch [BAND] to select the desired radio band.
Tuning to Preset Stations
Each press changes the bands as follows:
FM-1
4
FM-2
AM
You can tune in the preset stations in memory on each band using the
preset number.
FM-1
Touch [TUNE] to choose the tuning mode.
1
Each touch changes the tuning mode display.
Distance
Local
Manual
Distance
* “[PAGE 1/3]” is displayed in the HD Radio mode.
2
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode (with DX SEEK indicator ON);
Both strong and weak stations will be tuned in.
- Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
5
After selecting the desired band, touch [PAGE1/2]*
to change the function guide.
Touch any one of the preset buttons [P-1] through
[P-6] that has a station stored to it.
The preset station is received.
Touch [
], [
] or [
], [
] to change the
radio frequency up or down respectively.
In the manual mode, touch and hold to change the
frequency continuously.
• “DIGITAL” is displayed when a digital radio station is received.
• Also refer to “Digital SEEK Setting” (page 34).
14-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 15 Monday, January 15, 2007 4:02 AM
Changing the Display (HD Radio mode
only)
CD/MP3/WMA/AAC
Display example for MP3/WMA main screen
Text information, such as Station name, Song title, Artist, etc., is
displayed while receiving a digital radio station.
1
Touch [INFO.] on the HD Radio Tuner mode main
screen.
Each time you touch this button, the display changes as
shown below.
Short Station Name *1
Song title *2
Long Station Name *1
Artist *2
Album
*2
*1 Displays Short Station Name / Long Station Name in the Station
Information Service Data.
*2 Displays Song title / Artist / Album in the main program Service
Data.
Displaying a List of the Program (HD
Radio mode only)
CD:
Displays track text*1 in the upper line.
Displays Disc Text/Artist *1 in the lower line.
• If there is neither Track nor Disc name information, “NO
TEXT” will be displayed.
MP3/WMA/AAC:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name in the lower line, the album
name/artist name are displayed if there is ID3 tag
information.
CD:
Displays the disc number*2/track number/elapsed time.
MP3/WMA/AAC:
1
2
Touch [P1/3] twice in the HD Radio Tuner mode to
change to the function guide.
Touch [
].
The program list is displayed.
3
Touch [
Displays the disc number*3/folder number/file number/
elapsed playback time
[
] button: Refer to page 27
*1 Displayed when a CD text disc is inserted.
*2 Displayed when a CD changer is connected.
*3 Displayed when an MP3 compatible CD changer is connected.
] of the desired program type.
The selected program is received.
Receiving a Multicast (HD Radio mode
only)
Multicasting, which is the ability to broadcast multiple program streams
over a single FM frequency, thereby increasing the amount and diversity
of content choices.
When the channel for the multicast radio station is received, the
“MULTICAST” indicator lights.
1
2
Touch [P1/3] twice in the HD Radio Tuner mode to
change to the function guide.
Touch [ ] or [ ] of PROGRAM.
The sub channel of the received radio station is changed.
15-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 16 Monday, January 15, 2007 4:02 AM
Playback
1
Repeat Play
Press SOURCE/
.
The SOURCE selection screen is displayed.
2
Touch [DVD].
Touch [
] to play back repeatedly the track currently
being played.
The track (file) will be played repeatedly.
Touch [
] again and select OFF to deactivate Repeat play.
The display shows the DVD player mode screen.
When a CD/MP3/WMA/AAC is inserted into the DISC SLOT
of the IVA-D105, with the label side facing up, the unit starts
to play the CD/MP3/WMA/AAC.
3
Touch [
(file).
] or [
] to select the desired track
Fast reverse :
Touch and hold [
].
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
].
(off)
RPT
MP3/WMA/AAC:
1 Touch [PAGE1/2]*3 to change the function guide.
2 Touch [
] and select the desired Repeat play.
RPT
Returning to the beginning of the current track (file):
Touch [
].
RPT DISC*1
CD: RPT
RPT FLDR*2
RPT DISC*1
(off)
RPT
*1 If a CD Changer or an MP3 compatible CD changer is connected
and the RPT DISC mode is selected, the unit repeatedly plays back
all tracks (files) on the disc selected.
*2 Only files in a folder are repeatedly played back.
*3 Display may vary depending on the connected devices.
M.I.X. (Random Play)
To pause playback
Touch [
Touch [ /
Touching [
The tracks (files) on the disc will be played back in a random
sequence.
].
/ ] again will resume playback.
To eject the disc
Press
.
• If the disc does not eject, press and hold for at least 3 seconds.
• The IVA-D105 model includes a built-in MP3/WMA/AAC unit. You
can play CD-ROMs, CD-Rs, and CD-RWs containing MP3/WMA/
AAC files on this unit. Use the format compliant with this unit.
For further information about playing or storing MP3/WMA/AAC
files, refer to pages 17 and 18 before using the unit.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
• The unit can play discs containing both audio data and MP3/WMA/
AAC data.
• The MP3/WMA or AAC indicator is lit during MP3/WMA or AAC
playback.
• The track display for CD audio data playback is the track numbers
recorded on the disc.
• Three-inch (8cm) CD’s can be used.
• “Playing MP3/WMA/AAC Data” is mentioned on page 34.
• When an MP3/WMA/AAC disc is played, it sometimes takes a few
moment until it starts.
• Touch [ ] to activate the search mode. For operations, refer to
“Search Function” on page 27.
However, the search mode function does not work in the CD changer
mode.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If the disc is left in the unit after pressing , the disc is automatically
pulled back into the unit and paused. In this case, start playback by
touching [ / ] or eject again and remove the disc within 15
seconds.
] during playback.
To cancel M.I.X. play, touch [
CD: M.I.X.
M.I.X. ALL*1
].
(off)
M.I.X.
MP3/WMA/AAC:
1 Touch [PAGE1/2]*4 to change the function guide.
2 Touch [
] and select the desired M.I.X. play.
M.I.X. FLDR*3
M.I.X.*2
(off)
M.I.X. FLDR*3
*1 If a CD Changer equipped with the M.I.X. ALL function is connected,
M.I.X. ALL will also be selectable.
In this mode, the tracks on all the CDs in the current magazine will
be included in the random playback sequence.
*2 If an MP3 compatible CD changer is connected, all files in a disc are
played back in random sequence, and playback shifts to the next disc.
*3 Only files in a folder are played back in random sequence in the
M.I.X. FLDR mode.
*4 Display may vary depending on the connected devices.
Selecting Folders (concerning MP3/
WMA/AAC)
Touch [
FLDR] or [FLDR
] to select the folder.
16-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 17 Monday, January 15, 2007 4:02 AM
About MP3/WMA/AAC
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
What is WMA?
WMA, or “Windows media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
What is AAC?
AAC is the abbreviation for “Advanced Audio Coding,” and is a
basic format of audio compression used by MPEG2 or MPEG4.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC
codecs. For details on creating MP3/WMA/AAC files, refer to the
user’s manual for that software.
MP3/WMA/AAC files that are playable on this device have the
file extensions.
MP3: “mp3”
WMA: “wma” (ver. 2, 7, 8, 9 are supported, however PRO,
VOICE, LOUDNESS are not supported)
AAC: “m4a”
There are many different versions of the AAC format. Confirm
that the software being used conforms to the acceptable
formats listed above. It’s possible that the format may be
unplayable even though the extension is valid.
Playback of AAC files encoded by iTunes version 4.8 or earlier is
supported.
With low level sampling or bit rates set, playback may not
function correctly or sound quality may deteriorate. It is
recommended to create a disc using as high a level sampling or
bit rate as possible, within the range that playback is possible.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA/AAC file, this device can display
the title (track title), artist name, and album name ID3 tag/WMA
tag data (maximum 128 characters).
This device can only display single-byte alphanumeric
characters and the underscore. For non-supported characters,
“NO SUPPORT” is displayed.
The number of characters may be limited, or not correctly
displayed, depending on the tag information.
Producing MP3/WMA/AAC discs
MP3/WMA/AAC files are prepared, then written to a CD-R or CDRW (DVD-R/DVD-RW) using CD-R writing software. A disc can
hold up to 4096 files/256 folders (including Root Folders).
Depending on the folder/file structure of the disc, it can take
several minutes to read a disc. In this case, it is recommended
to reduce the number of folders used.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs,
CD-RWs, DVD-Rs and DVD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, etc., and other
standards that conform to ISO9660. However, sometimes the
file names, folder names, etc., are not displayed correctly.
Formats supported
This device supports CD-ROM, CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Supported playback sampling rates and bit rates
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz, 16 kHz,
11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 11.025 kHz
Bit rates:
16 - 320kbps
This device may not play back correctly depending on sampling
rates.
17-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 18 Monday, January 15, 2007 4:02 AM
Terminology
Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be
what's expected. Verify the writing order in the software's
documentation. The playback order of the folders and files is as
follows.
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of
44.1 kHz, so the sound is sampled (recorded) 44,100 times per
second. The higher the sampling rate, the higher the sound quality,
but also the larger the volume of data.
Root
Folder
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA/AAC files.
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
Folder
MP3/WMA/AAC File
18-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 19 Monday, January 15, 2007 4:02 AM
DVD/Video CD
Display example for DVD Video main screen
Playing a Disc
IVA-D105 has a built-in DVD player. When an optional Alpine DVD/
Video CD/CD player (or DVD changer) is connected to the IVA-D105,
you can control it from the IVA-D105. (except some operations)
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the DVD/TV/Video while driving the
vehicle. The driver may be distracted from looking
ahead and an accident could occur.
Displays the disc (DVD VIDEO, DVD AUDIO,
PROGRAM/PLAYLIST (DVD-VR), VIDEO CD) being
played back.
Displays tag information for DivX®.
Displays the title number/chapter number/elapsed
playback time for a DVD Video.
Displays the group number/track number/elapsed playback
time for a DVD Audio.
Displays the program or playlist number/chapter number/
elapsed playback time for a DVD-VR.
Displays the track number/elapsed playback time for a
Video CD (When PBC is turned off).
Displays the folder number/file number/elapsed playback
time for a DivX®.
• If [ ] on the DivX® mode screen is touched, the search list screen is
displayed. Refer to “Search Function” (page 27).
• Some operations cannot be carried out depending on the disc or
playback screen.
• Displays of the function guide [PAGE1/2], etc., may vary depending
on the connected device(s).
Disc types that can be used for each heading are
represented by the following marks.
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVDRW, DVD+R/DVD+RW recorded in a video
mode can be used.
(including discs containing both DVD video
and DVD audio data that are played back
when “VIDEO” is set in “Setting the DVDAudio Playback Mode” (page 33)).
DVD Commercial Audio discs can be used.
DVD-R/DVD-RW discs recorded in DVD-VR
mode can be used.
Install the IVA-D105 correctly so that the driver cannot
watch DVD/TV/Video unless the vehicle is stopped
and the emergency brake is applied.
If the IVA-D105 is not installed correctly, the driver will
be able to watch the DVD/TV/Video while driving the
vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
To display the DVD mode screen
To watch a video source, your vehicle must be parked with the ignition
key in the ACC or ON position. To do this, follow the procedure below.
1 Push the foot brake to bring your vehicle to a complete
stop at a safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 While the parking brake is being engaged the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD mode, as
long as the car's ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of “To display the DVD mode
screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
Video-CD discs can be used.
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the
DivX® mode can be used.
19-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 20 Monday, January 15, 2007 4:02 AM
•
•
•
•
Caution
Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
If you switch the power or Ignition Key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
• Play Position Memory Function
Even if you turn power off or switch the Ignition Key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.
1
Press SOURCE/
If a menu screen appears
On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 33).
Direct Menu Operations
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Menu Operations
1 Touch [KEY].
The menu operation mode will be displayed.
.
The SOURCE selection screen is displayed.
2
Touch [DVD].
The display shows the DVD player mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
When an optional Alpine DVD player is connected:
Insert a disc into the DVD/Video CD/CD player, the player
starts playing.
• The operation screen changes to the visual screen in the DVD or
Video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see “Switching Display Modes” on page 28.
Touch [RETURN] to return to
the previous display.
(Operation may not be
possible, depending on the
disc.)
2 Select a desired menu item by touching [ ], [
[ ].
3 Touch [ENTER] to confirm the selected item.
], [
] or
To eject the disc
Press
.
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• If the disc does not eject, press and hold for at least 3 seconds.
• Do not insert discs containing maps for the navigation system. Doing
so could result in damage.
• Refer also to “DVD Setup” (pages 29 to 34).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• To return to the previous screen during Video CD playback, touch
[RTN] after touching [PAGE1/2] of the function guide. However, the
function may vary depending on the disc.
• If the disc is left in the unit after pressing , the disc is automatically
pulled back into the unit and stopped. In this case, start playback by
touching [ / ] or eject again and remove the disc within 15
seconds.
• While “INDEX READING” is displayed by DivX®, the fastforwarding/fast-reversing and repeat functions, etc. cannot be used.
20-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 21 Monday, January 15, 2007 4:02 AM
Numeric Keypad Input Operations
Displaying the Menu Operation Mode
Screen
1
Touch [PAGE1/2]* on the DVD mode main screen.
The function guide changes.
* The display differs, depending on the disc (mode).
2
Touch [MENU CONT].
The menu operation mode screen appears.
1 Touch [KEY].
The menu operation mode appears.
2 Touch [KEY] again.
The numeric keypad input mode screen appears.
• For further operation, see “If a menu screen appears” on pages 20
and 21.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 33).
Searching by Program
The numeric
keypad input
screen closes
when the area
is touched
while
displayed.
1
Touch [TOP MENU] on the DVD mode main screen
while playing a DVD-VR disc.
The program search list screen is displayed.
2
Numeric Keypad Input Operations
When PBC is turned OFF, the menu screen is not displayed. Turn it ON
to display the screen (See “Setting the Video CD Play Mode” on
page 34).
1 Touch [PAGE1/2] in the Video CD mode to change the
function guide.
2 Touch [10KEY].
The numeric keypad is displayed.
3 Touch and input a desired number.
4 Touch [ENT] to confirm.
] of the program you want to play.
The selected program is played back, and then returns to
the DVD mode main screen.
Touch [RETURN] to close the
numeric keypad input screen.
3 Touch a desired number.
4 Touch [ENT] on the numeric keypad mode screen to
confirm your selection.
Touch [
Searching by Playlist
1
Touch [MENU] on the DVD mode main screen while
playing DVD-VR disc.
The playlist search list screen is displayed.
2
Touch [
] of the playlist you want to play.
The selected playlist is played back, and then returns to the
DVD mode main screen.
• Only discs containing a Playlist can be operated.
Stopping Playback (PRE STOP)
Displaying the Top Menu Screen
When a DVD contains two or more titles, the top menu screen appears.
Press the stop button during playback to stop playback. That position is
stored in the memory.
Touch [TOP MENU] on the DVD mode main screen.
1
The top menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
pages 20 and 21.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 33).
Displaying the Menu Screen
Touch [ ] once during playback.
“PRE STOP” is displayed.
2
Touch [
/
] in the PRE STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 33).
With a DVD having two or more menus, a menu screen will appear for
the programs available, in addition to the main programs.
Touch [MENU] on the DVD mode main screen.
The menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
pages 20 and 21.
21-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 22 Monday, January 15, 2007 4:02 AM
Stopping Playback
Supplementary explanation
Touch [ ] twice or touch and hold [ ] for at least 2
seconds during playback.
“STOP” is displayed, and playback stops.
• Playback starts from the beginning when [
playback is stopped.
/
] is touched while
“Chapters” are divisions of movies or musical selections on
DVDs.
“Tracks” are divisions of movies or musical selections on
Video CD, DVD Audio and music CDs.
“Groups” associate a track (one song) with other tracks
stored on a DVD-Audio. Group playback differs, depending
on the disc.
“Playlists” specify a range of images and their playback
order.
• Only discs containing a playlist can be used.
Fast-forwarding/Fast-reversing
Playing Still Frames (Pausing)
DVD-Video, DVD-VR, Video-CD, DVD-Audio (VCAP
mode)*, DivX®:
1
During playback, touch and hold [
reverse) or [
] (fast-forward).
] (Fast-
When touched and held for more than 1 second, the disc is
forwarded/reversed at double speed. When held for 5 more
seconds or longer, the disc is forwarded/reversed at 8 times
the normal speed. When held for 10 seconds or longer, the
disc is forwarded/reversed at 21 times the normal speed.
DVD-Audio (VOFF mode)*:
1
2
During playback, touch and hold [
reverse) or [
] (fast-forward).
] (Fast-
1
2
] or [
• No sound is played back during fast-forwarding/fast-reversing.
• For DVDs and Video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
• Operation may not be possible, depending on the disc.
/
].
] to resume playback.
Forward/reverse frame-by-frame
Playback
] to return to normal
* When “VCAP” or “VOFF” is set in “Setting the DVD-Audio
Playback Mode” (page 33).
Touch [
/
• No sound is played during the still frame mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
1
Stop touching [
playback.
During playback, touch [
In the pause mode, touch [
] or [
].
The picture advances or reverses by one frame each time
the button is touched.
2
Touch [
/
] to return to normal mode.
• No sound is output during forward/reverse frame-by-frame playback.
• Reverse frame-by-frame cannot be carried out on the DVD-VR and
Video CD.
Slow Motion Playback
Finding the Beginnings of Chapters/
Tracks/Files
During playback, touch [
] or [
].
The chapter/track/file switches each time the button is touched,
and playback of the selected chapter/track/file starts.
1
When [
] or [
] is touched and held while in
the pause mode, the 1/8th speed slow motion
playback mode is set.
When held in for 5 more seconds, the slow motion
speed switches to 1/2 the normal speed.
:Touch this to start playback from the beginning of the
following chapter, track or file.
:Touch this to start playback from the beginning of the
current chapter, track or file.
• Some DVDs do not have chapters.
• Be sure to turn PBC off before starting the search (see “Setting the
Video CD Play Mode” on page 34).
22-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 23 Monday, January 15, 2007 4:02 AM
2
Stop touching [
] or [
[ / ] to play back.
] to pause, and touch
• No sound is played during slow motion playback.
• Reverse slow motion playback is not available on the DVD-VR and
Video CD.
• 1/2, 1/8 are approximate speeds. The actual speed differs from disc to
disc.
Video CD
1
During playback, touch [
] on the main unit.
The repeat mode switches every time the button is touched.
The track is played repeatedly.
The disc is played repeatedly.
Selecting Program (SKIP)
1
Touch [PAGE1/3] twice while playing a program of a
DVD-VR disc.
The PROGRAM function guide is displayed.
2
Touch [ ] or [ ] of PROGRAM* to select the
desired program.
* To switch [ ] or [ ] of PLAYLIST in the function guide
display to [ ] or [ ] of PROGRAM, play back the program.
For details, refer to “Searching by Program” (page 21).
*
Playback does not repeat.
* Displayed only in the changer mode.
• Display may vary depending on the connected devices.
• The track/disc repeat modes cannot be used on Video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off. See “Setting the Video CD Play Mode” on page 34.
• For some discs it is not possible to switch the repeat mode.
DVD Audio
1
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
Selecting Playlist (SKIP)
1
VCAP mode*1:
Touch [PAGE1/3] twice while playing a playlist of a
DVD-VR disc.
The PLAYLIST function guide is displayed.
2
Touch [ ] or [ ] of PLAYLIST* to select the
desired playlist.
* To switch [ ] or [ ] of PROGRAM in the function guide
display to [ ] or [ ] of PLAYLIST, play back the playlist.
For details, refer to “Searching by Playlist” (page 21).
REPEAT
The track is played repeatedly.
REPEAT GROUP
The group is played repeatedly.
REPEAT OFF
The playback returns to normal
mode.
VOFF mode*1:
RPT
Selecting Folders
The track is played repeatedly.
RPT GROUP
1
Touch [PAGE1/2].
(OFF)
The function guide appears.
2
Touch [
FLDR] or [FLDR
] to select the folder.
The group is played repeatedly.
The disc is played repeatedly.
*1 When “VCAP” or “VOFF” is set in “Setting the DVD-Audio
Playback Mode” (page 33).
Repeat Playback
Use this function to play the disc’s titles, chapters or tracks, etc.,
repeatedly.
DVD Video
1
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
The chapter is played repeatedly.
The title is played repeatedly.
The playback returns to normal mode.
• Display may vary depending on the connected devices.
• The REPEAT mode is always turned off when [
] is touched and
held for at least 2 seconds.
23-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 24 Monday, January 15, 2007 4:02 AM
DVD-VR
1
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
Searching by Title/Group/Program/
Playlist/Folder Number
The Program mode*2:
REPEAT
The chapter is played
repeatedly.
REPEAT PROGRAM
The program is played
repeatedly.
REPEAT DISC
All programs are played
repeatedly.
The Playlist
mode*2
Touch [PAGE1/2]* while playback is stopped.
The function guide appears.
* The display differs, depending on the disc (mode).
2
3
REPEAT
The chapter is played
repeatedly.
REPEAT PLAYLIST
The playlist is played
repeatedly.
REPEAT DISC
All playlists are played
repeatedly.
• Only discs containing a Playlist can be displayed.
DivX ®
Touch [
1
Touch [10KEY].
The numeric keypad input mode screen appears.
:
*2 To switch the Program mode display to the Playlist mode display on
the DVD mode main screen, play back via program or playlist
search. Refer to “Searching by Program” or “Searching by Playlist”
(page 21).
1
Use this function to easily find positions on the DVD using the DVD’s
titles, Groups, Programs or playlists.
] on the main unit.
The repeat mode switches every time the button is touched.
REPEAT
The file is played repeatedly.
REPEAT FOLDER
The folder is played repeatedly.
REPEAT DISC (OFF)
The disc is played repeatedly.
• The REPEAT mode is always turned off when [
held for at least 2 seconds.
Enter a desired title, Group, Program or playlist by
touching its title, Group, Program or playlist number.
See page 21 for operation of the numeric keypad.
4
Confirm your selection by touching [ENT].
Playback will start from the title number selected.
• To switch the Program mode display to the Playlist mode display on
the DVD mode main screen, play back via program or playlist
search. Refer to “Searching by Program” or “Searching by Playlist”
(page 21).
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of PRE STOP.
• Some disc may not accept any operation.
Searching Directly by Chapter, Track or
File Number
Use this function to easily move to the beginnings of the chapters, tracks
or files on the disc.
1
] is touched and
Touch [PAGE1/2]* in any mode other than stop
mode.
The function guide will appear.
* The display differs, depending on the disc (mode).
2
Touch [10KEY].
The numeric keypad input mode screen will appear.
3
Touch and enter the chapter or track number you
want to play.
See page 21 for operation of the numeric keypad.
4
Touch [ENT] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
• Be sure to turn PBC off before starting the search (See “Setting the
Video CD Play Mode” on page 34).
24-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 25 Monday, January 15, 2007 4:02 AM
Switching the Angle
Video CDs or DVD-VR with multiplex audio
1
The function guide changes.
*2 Touch [PAGE1/3] while playing a DVD-VR disc.
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
During playback, touch [PAGE1/2]*.
2
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
• To playback a DVD-Audio disc, set “VCAP” or “VIDEO” in
“Setting the DVD-Audio Playback Mode” (page 33).
Scroll to Move the Page Forward or Back
Touch [AUDIO]*3.
The left and right channels will be output as shown below,
each time the button is touched.
*3 Touch [AUDIO] for at least 2 seconds to switch while playing a
DVD-VR disc.
The function guide changes.
* The display differs, depending on the disc (mode).
2
During playback, touch [PAGE1/2]*2.
AUDIO LR
AUDIO LL
AUDIO RR
AUDIO LR
Switching the Subtitles (Subtitle
Language)
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
1
During playback, touch [PAGE1/2]*.
The function guide changes.
* The display differs, depending on the disc (mode).
“Page” is a still image stored on a DVD-Audio disc.
1
Touch PAGE [
] or [
].
The display switches.
Touch and hold to display the home page.
• For DVD-Audio discs without Pages, depending on the DVD-Audio
disc, the “Page” function may not be operable if images are in slide
show form.
Switching the Audio Tracks
Touch [SUBT.].
Touching this button repeatedly selects sequentially the
subtitle languages recorded on the disc, and then turns the
subtitles OFF.
Touch [PAGE1/3] twice while playing a DVD-Audio
disc in VCAP mode*.
* Playing back a DVD-Audio disc when “VCAP” is set in
“Setting the DVD-Audio Playback Mode” (page 33).
2
2
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 33).
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc’s default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
OFF. However, the subtitle language may differ depending on the
disc.
• Switches the subtitles ON/OFF while playing a DVD-VR disc.
Switching from the disc menu
DVDs can have up to 8 different audio tracks. These alternate tracks can
be switched during playback.
1
During playback, touch [PAGE1/2]*1.
2
Touch [AUDIO].
*1 The display differs, depending on the disc (mode).
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
2
Touch [MENU] or [TOP MENU] to display the
menu.
Select an item to confirm it.
See “If a menu screen appears” on pages 20-21.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 33).
25-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 26 Monday, January 15, 2007 4:02 AM
Displaying the Disc Status for DVD/Video
CD
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD or of the currently
playing Video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
Other Useful
Features
Adjusting the Audio
The operation menu screen is displayed.
2
Touch [CONTROL] within 5 seconds.
1
• Touching an area other than the function guide in the display within
5 seconds, turns off the disc status display.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 33).
Press SETUP.
The SETUP selection screen is displayed.
The display status is displayed for 5 seconds.
2
Touch [
] of AUDIO or press and hold the Rotary
encoder for at least 2 seconds on the unit.
The display changes to the AUDIO setup screen.
Display Example for Audio setup Screen
About DivX®
DivX® is a codec (software) program to compress moving images while
maintaining image quality using a highly advanced compression ratio
and operating speed.
• Official DivX® Certified product
• Plays all versions of DivX® video (including DivX® 5) with
standard playback of DivX® media files
• DivX, DivX Certified, and associated logos are trademarks of
DivX, Inc. and are used under license
The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the DivX® mode with
extension “avi” or “divx”.
The optimum size for DivX® disc playback is as follows:
Screen Size:
32 to 720 pixel (horizontal) × 32 to 576 pixel
(vertical)
If an aspect ratio is set other than 720 pixel (horizontal) × 480
pixel (vertical), a black belt may be displayed on the left and
right sides, or at the top and bottom of the screen.
Image bit rate:
“average 4 Mbps, Peak 8 Mbps”
Home Theater Profile supported
Scrolls the page list up or down.
Scrolls the list item by item.
Touching and holding will scroll continuously.
For details on how to use the BassEngine, refer to
“BassEngine Operation” (page 43).
When an external audio processor is connected, the
“BassEngine” indicator changes to “A.PROCESSOR.” For
A.PROCESSOR operation, refer to “External Audio
Processor” (page 43).
• Touching [RETURN] will return to the previous display.
• When an external audio processor is connected, BASS, TREBLE or
LOUDNESS is not displayed.
Adjusting Bass/Treble:
You can change the bass or treble frequency emphasis
to create your own tonal preference.
Touch [
] to display the Bass or Treble adjusting screen.
The following audio recording systems are supported.
MPEG1 Layer II
MPEG1 Layer III
MPEG2 Layer III
MPEG2.5 Layer III
Dolby Digital
64 to 384 kbps
32 to 320 kbps
8 to 160 kbps
8 to 160 kbps
64 to 448 kbps (Max. 5.1ch)
Setting the Bass Center Frequency:
The displayed bass frequency is emphasized
Touch [ ] or [
frequency.
] of FREQ. to select the desired bass center
Setting range: 60Hz, 80Hz, 100Hz, 200Hz
Setting the Bass level:
You can emphasize or weaken the bass frequency.
Touch [
] or [
] of LEVEL to select the desired bass level.
Setting range: -7 to +7
26-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 27 Monday, January 15, 2007 4:02 AM
Setting the Bass Bandwidth (Q-Factor):
Turning Defeat ON or OFF:
Changes the boosted bass bandwidth to wide or narrow.
A wide setting will boost a wide range of frequencies
above and below the center frequency. A narrower
setting will boost only frequencies near the center
frequency.
Touch [ ] or [ ] of DEFEAT to set to ON or OFF.
Touch [ ] or [ ] of Q (BASS BANDWIDTH) to select the desired
bass bandwidth.
Setting range: 1, 1.25, 1.5, 2
• The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass band width settings adjusted for one source are
effective for all other sources (FM, AM, CD, etc.).
If you set defeat to ON, adjusted bass/treble values return to
their initial settings.
Search Function
1
Touch [ ] on the function guide while in the CD or
MP3/WMA/AAC or DivX® mode.
Search list screen is displayed.
Select a desired track or folder.
Touch [
Setting the Treble Center Frequency:
When a hierarchical list is prepared, [
] will be
displayed. Touch [
] to display the respective
hierarchy list screens.
The displayed Treble frequency is emphasized.
Touch [ ] or [
frequency.
] of FREQ. to select the desired treble center
Setting range:10kHz, 12.5kHz, 15kHz, 17.5kHz
] for direct playback.
Display Example for Search Screen
Setting the treble level:
You can emphasize the treble frequency.
Touch [
] or [
] of LEVEL to select the desired treble level.
Setting range: -7 to +7
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
Adjusting the Balance:
Touch [ ] or [ ] of BALANCE to adjust the sound
volume of the left and right speakers.
Setting range: L15 to R15
Adjusting the Fader:
Touch [ ] or [ ] of FADER to adjust the volume of the
front and rear speakers.
Setting range: F15 to R15
Setting the Loudness:
Loudness introduces a special low- and high-frequency
emphasis at low listening levels. This compensates for
the ear’s decreased sensitivity to bass and treble sound.
Touch [
] or [
] of LOUDNESS to set to ON or OFF.
Select directly by touching [ ], and its Track (or folder/
file) is played back.
Scrolls the page list up or down.
(Displayed when the list items cannot be displayed entirely.)
Scrolls the list item by item.
Touching and holding will scroll continuously.
(Displayed when the list items cannot be displayed entirely.)
Touch [RETURN] to return to the previous list screen.
[
] is displayed if there is a hierarchical list.
• The search function does not work on the DVD, Video CD or CD
changer.
• A folder list is displayed only during MP3/WMA playback when the
DVD player (DVA-5210) or changer compatible with MP3 is
connected.
Internal CD player mode
Adjusting the Subwoofer Level:
1 The track list* screen appears.
* If the CD is text compatible only.
Touch [ ] or [ ] of SUBW. LV to adjust the subwoofer
output.
2 Touch [ ] of a desired track text*.
The selected track will be played back.
Setting range: 0 to 15
• The level adjustment becomes available when ON is set in
“Subwoofer On and Off” (page 38).
• “TRACK” is displayed in the track text list if there is no text
on the disc.
Adjusting NAV. LEVEL:
Touch [ ] or [ ] of NAV. MIX LV to adjust the volume of
navigation interruption.
Setting range: 0 to 15
• This adjustment becomes available when NAV.MIX is turned on in
“Setting the Navigation Interruption” (page 37).
• The setting navigation interruption is not displayed if an external
audio processor not compatible with NAV.MIX is connected.
27-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 28 Monday, January 15, 2007 4:02 AM
Internal MP3/WMA/AAC/DivX ® Player/external MP3compatible DVD Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
].
([
] appears only when a file is present in the selected
folder.)
The file list screen is displayed.
• Touch [
] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16 : 9 ratio.
Rear Selection Function
While listening to the radio or other audio source, at the same time,
pictures in a disc inserted in the IVA-D105 can be enjoyed in the rear
monitor. However, only pictures are output, not sound.
1
Press SOURCE/
.
The SOURCE selection screen is displayed.
2
Touch [REAR].
Rear Select display appears.
• This function cannot be used when “Setting the Picture/Sound
Output” (page 38) is set to OFF in the SYSTEM SETUP.
• If [MAIN] on the Rear Select screen is touched, the screen
changes to the main source screen.
3
In Mode 3 (Normal), the monitor displays a normal picture at the
center of the screen with a vertical black band at each side.
Touch the desired source such as visual (auxiliary
input, built-in DVD, etc.) to select.
• Touch [OFF] to cancel the rear entertainment function.
• When the “Setting the AUX Mode” (page 37) is set to OFF, the
auxiliary source is not displayed.
While your vehicle is parked, touch [WIDE] on the visual
source screen or press BAND on the unit.
Each touch changes the display modes as follows:
MODE 3
(NORMAL)
• After carrying out the steps 1 to 3 of “To display the DVD mode
Screen” explained on page 29, perform the operation described
below.
1
Press VISUAL on the unit.
The VISUAL selection screen appears.
Touch a desired visual source.
The visual source is switched to the selected one.
After carrying out the steps 1 to 3 of “To display the DVD mode
Screen” explained on page 29, perform the operation described below.
MODE 2
(CINEMA)
You can watch the video portion of another source while listening to the
current source.
2
Switching Display Modes
MODE 1
(WIDE)
Switching the Visual Source Only
(Simultaneous Function)
MODE 1
(WIDE)
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
Cancelling the Simultaneous Function
1
2
Press VISUAL.
Touch [NORMAL].
The simultaneous function is canceled.
• To apply the setting, set to VISUAL in “Setting the VISUAL Button”
(page 38).
• If a DVD player is connected, you can receive the DVD picture.
DVD changer (DHA-S680) is connected:
Press and hold V.OUT on the remote control supplied with the DVD
player or DVD changer for more than 2 seconds. The picture of the
DVD will be output.
The DVA-5210 is connected:
Press V.OUT on the remote control (included with the DVA-5210) to
output DVD picture.
• The simultaneous function cannot be used when the Audio source is
in the navigation mode.
When NAV. is set in “Setting the VISUAL Button” (page 38), only the
navigation screen can be recalled.
• When the “Setting the AUX Mode” (page 37) is set to OFF, the
auxiliary source is not displayed.
28-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 29 Monday, January 15, 2007 4:02 AM
Blackout Mode On and Off
When Blackout mode is turned on, the monitor display will turn off to
reduce power consumption.
This additional power enhances the sound quality.
1
DVD Setup
Press VISUAL on the unit.
The VISUAL selection screen is displayed.
2
Setup
DVD Setup Operation
Touch [OFF].
The backlit-display portion goes out.
3
Touch [OFF] again to cancel the display backlight.
• To apply the setting, set to VISUAL in “Setting the VISUAL Button”
(page 38).
• If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
To display the DVD mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
Setting rear Camera Interruption
When the rear camera is connected, rear pictures are output on the
screen.
1
2
Select CAMERA in “Setting the AUX Mode”
(page 37).
Press VISUAL on the unit.
The VISUAL selection screen is displayed.
3
Touch [CAMERA].
Rear picture is output even if you do not engage the shift
lever in reverse (R).
4
To cancel the setting, press VISUAL on the unit,
and touch [NORMAL].
• By shifting to reverse (R),the rear pictures are output. This function is
effective when the reverse wire is properly connected.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of “To
display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
The DVD Setup operation can be carried out after removing the
disc from the unit.
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [
] of SOURCE.
The SOURCE SETUP screen appears.
3
Touch [
] of DVD.
The DVD setup screen appears.
4
Touch [ ] or [ ], etc., of the desired item to change
its setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT /
DOWNMIX MODE / TV SCREEN / BONUS CODE /
DVD-A SETUP / DISC PLAY MODE / PLAY MODE / DivX
Information / PBC
29-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 30 Monday, January 15, 2007 4:02 AM
Display example for DVD setup screen
Setting of the Menu Language
Set the language used for the menus (title menu, etc.).
Setting item: MENU LANGUAGE
Setting contents: AUTO / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “AUTO” is selected, the primary menu language among the
recorded ones is played.
Setting of the Audio Language
Set the audio language produced from the speakers.
Touch [CODE] to display the numeric keypad screen.
Touch [ ] or [ ] to set a desired language.
Scrolls the page list up or down.
Scrolls the list item by item.
Touching and holding will scroll continuously.
Setting item: AUDIO LANGUAGE
Setting contents: AUTO / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “AUTO” is selected, the primary audio language among the
recorded ones is played.
Setting of the Subtitle Language
Set the language of the subtitles displayed on the screen.
Setting item: SUBT. LANGUAGE
Setting contents: AUTO / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “AUTO” is selected, the primary subtitle language among the
recorded ones is played.
To play in a language other than those displayed
The numeric keypad input screen closes when the area
is touched while displayed.
Numeric keypad input screen
The numeric keypad is used if you want to play back in
a language other than that displayed, or to input your
parental lock password, etc.
5
Touch [RETURN] to return to the previous screen.
• Immediately after changing the settings of DVD mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
when you always want to listen in English. (The language setting is not
effective on some discs. If not, the default language is set from the
factory.)
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are cleared even when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 25).
• If the disc does not include the selected language, the disc’s default
language is set.
1 Touch [CODE].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
As for the language number, refer to “List of Language
Codes” (page 65).
3 Touch [ENT] to memorize the number.
Changing the Country Code Setting
Set the country number of which you want to set the rating level
(Parental lock).
Setting item: COUNTRY CODE
Setting content: AUTO / OTHER
AUTO:
OTHER:
The primary country code among the recorded
ones is played.
Touching [CODE] will display the currently
selected country code in the input space.
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are cleared even when the vehicle’s battery is disconnected.
1 Touch [CODE] of COUNTRY CODE.
2 Touch [ALL DEL] or [BS].
Delete the displayed country number.
3 Touch the 4-digit country code.
As for the country number, refer to “List of Country
Codes” (pages 66 and 67).
4 Touch [ENT] to memorize the code.
30-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 31 Monday, January 15, 2007 4:02 AM
Setting the Rating Level (Parental Lock)
Changing the Digital Output Setting
This function can help restrict the viewing of movies to children of
appropriate age levels only.
Use the following procedure to set the digital audio signal output from
the IVA-D105.
Setting item: PARENTAL
Setting content: INPUT
Setting item: DIGITAL OUT
Setting contents: BITSTREAM / PCM
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• If you want to play back DVD software with the parental lock feature
and its use is currently restricted, change the rating level and the
country number in order to play back the DVD.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
BITSTREAM: The digital output is switched automatically
according to the type of audio signals being
played.
Be sure to select “BITSTREAM” when you want to
connect a digital audio processor and play Dolby
Digital audio. “BITSTREAM” is the factory setting.
PCM:
The audio signals recorded on the disc are
converted to 48 kHz/16 bit (for DVDs) or 44.1 kHz
(for Video CDs and CDs) PCM audio signals for
output.
1 Touch [INPUT].
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111.
Input number are displayed as “*”.
3 Touch [ENT] to memorize the number.
The PARENTAL screen appears.
Set the rating level of PARENTAL
4 Touch [ ] or [ ] of PARENTAL to turn on.
5 Touch [ ] or [ ] of PARENTAL LEVEL to select the rating
level (1 to 8).
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Touch [RETURN] to return to the previous screen.
Changing the password
4 Touch [INPUT] of PASSWORD CHANGE.
The numeric keypad screen is displayed.
5 Touch the input screen to enter a new 4-digit password.
• Keep a note of the number somewhere safe in case you should
forget it.
6 Touch [ENT] to memorize the number.
7 Touch [RETURN] to return to the previous screen.
Changing the rating level temporarily
Some discs may request that you change the rating level set in
the default settings during playback. In this case, the message
appears on the monitor screen “PARENTAL LEVEL CHANGE OK?
[YES] [NO].”
If this screen appears, change the level as follows:
• To change parental level and play, touch [YES].
When [YES] is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in “Setting the Rating Level
(Parental Lock)” you set, then touch [ENT].
• To play without changing the parental level, touch [NO].
(When [NO] is touched, playback will be at the parental level set
in “Setting the Rating Level (Parental Lock).”)
31-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 32 Monday, January 15, 2007 4:02 AM
Audio output/Optical digital audio output
Disc
Audio recording format
Digital output setting
(DVD SETUP)
Optical digital audio
output
Analog audio output
(Ai-NET, RCA output)
Format
Fs
Q
LPCM
(CD-DA,
DVD-V, DVDA, DVD-VR)
44.1/176.4kHz
16/20/24bit
BITSTREAM or PCM
44.1kHz, 16bit, PCM
2ch (2ch Downmix)*
OK
48/96/192kHz
16/20/24bit
BITSTREAM or PCM
48kHz, 16bit, PCM 2ch
(2ch Downmix)*
OK
PPCM
(DVD-A)
44.1/88.2/
176.4kHz
16/20/24bit
BITSTREAM or PCM
Not output
OK
48/96/192kHz
16/20/24bit
Dolby Digital
(-EX)
(DVD-V, DVDA, DVD-VR)
48kHz
16/18/20bit
PCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 7.1ch)*
OK
DTS (-ES)
(CD-DA,
DVD-V, DVDA)
44.1kHz
PCM
44.1kHz, 16bit Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 6.1ch)*
OK
PCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 6.1ch)*
OK
PCM
44.1kHz, 16bit,
Decoded 2ch*
OK
BITSTREAM
Bit stream*
OK
PCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 5.1ch)*
OK
PCM
44.1kHz, 16bit,
Decoded 2ch*
OK
BITSTREAM
Bit stream*
OK
48/96kHz
MPEG1Layer
II
(VCD, DVD-V,
DVD-A, DVDVR)
MPEG2Layer
II
(DVD-V, DVDA, DVD-VR)
MPEG1/2/
2.5Layer III
(MP3, WMA)
44.1kHz
48kHz
44.1kHz
16/20/24bit
16/20/24bit
16bit
16bit
16bit
48kHz
16bit
PCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 5.1ch)*
OK
32kHz
16bit
BITSTREAM or PCM
32kHz, 16bit, Decoded
2ch
OK
44.1kHz
16bit
BITSTREAM or PCM
44.1kHz, 16bit,
Decoded 2ch
OK
48kHz
16bit
BITSTREAM or PCM
48kHz, 16bit, Decoded
2ch
OK
* Not output when playing back a DVD-Audio.
32-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 33 Monday, January 15, 2007 4:02 AM
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: SURROUND / STEREO
SURROUND: Surround compatible Downmix
STEREO:
Stereo Downmix
Setting the TV Screen
Setting of the Bonus Code
Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc., of the disc, for the code
number.
Setting item: BONUS CODE
Setting contents: INPUT
1
Touch [INPUT].
The 10 key input screen is displayed.
Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-D105.
If the rear monitor is not connected, the screen setting is 16:9.
Setting item: TV SCREEN
Setting contents: 4:3 LB / 4:3 PS / 16:9
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16 : 9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
2
3
Input the 4 digit code number given on the jacket of
the disc, etc.
Touch [ENT] to memorize the number.
• If the code number of the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display. If a new code number is input, this code number will
be replaced.
Setting the DVD-Audio Playback Mode
To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player) or VOFF (Video OFF) to playback the DVD
Audio.
Setting item: DVD-A SETUP
Setting contents: VIDEO / VCAP / VOFF
VIDEO:
VCAP:
VOFF:
Only DVD Video is played back if the disc
contains DVD Video and Audio.
DVD Audio is played back with Video.
DVD Audio is played back without Video.
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16 : 9 size
movie).
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.
33-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 34 Monday, January 15, 2007 4:02 AM
Setting the compressed File Playback Data
If a disc containing both a compressed video file and a compressed
audio file is used, you have a choose to play back only a video or only
audio.
Setting item: DISC PLAY MODE
Setting contents: VIDEO / AUDIO
VIDEO:
AUDIO:
only VIDEO data is played back.
only AUDIO data is played back.
Playing MP3/WMA/AAC Data
RADIO Setup
Digital SEEK Setting (HD Radio mode
only)
After carrying out the steps 1 to 3 of “To display the General mode
screen” explained on page 35, perform the operation described below.
1
The SETUP selection screen is displayed.
When using discs containing both audio data and MP3/WMA/AAC
data.
2
Setting item: PLAY MODE
Setting content: CD / CMPM
3
Plays only the audio data on discs containing both audio
data and MP3/WMA/AAC data.
CMPM: Plays only the MP3/WMA/AAC files on discs containing
both audio data and MP3/WMA/AAC data.
Touch [
] of SOURCE.
The SOURCE SETUP screen appears.
Touch [
] of RADIO.
The RADIO setup screen appears.
CD:
• If a disc is inserted, remove it from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
Touch [SETUP] on the main source screen.
4
Touch [ ] or [ ] of DIGITAL SEEK to toggle
between ON and OFF.
ON: SEEK UP/DOWN is used only for the digital radio station.
OFF: SEEK UP/DOWN is used for DIGITAL and ANALOG radio
stations. However, the strong signals have priority during
SEEK.
Displaying DivX® Disc Information
Setting item: DivX Information
If [
] of DivX Information is touched, a DivX® file
registered code is displayed.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: ON / OFF
ON:
OFF:
The PBC menu is displayed.
The PBC menu is not displayed.
34-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 35 Monday, January 15, 2007 4:02 AM
GENERAL Setup
Displaying the Time
The clock indication on the monitor display is turned on or off
respectively.
General Setup Operation
To display the General mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General mode, as long as the car's ignition has not been turned
off. It is not necessary to repeat the above procedure (1 through
3), of “To display the General mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the General mode screen.”
The following steps 1 to 4 are common operations to each
“Setting item” of GENERAL Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [
] of GENERAL SETUP.
The GENERAL setup screen appears.
3
Touch [ ] or [ ], etc., of the desired item to change
its setting.
Setting items:
CLOCK / CLOCK ADJUST / DAYLIGHT SAVING TIME /
DEMONSTRATION / BEEP / AUTO SCROLL / LANGUAGE
SELECT / LED DIMMER LEVEL
4
Touch [RETURN] to return to the previous screen.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Setting item: CLOCK
Setting content: OFF / ON
Setting the Time
Setting item: CLOCK ADJUST
Further setting items : HOUR / MINUTE / TIME ADJUST
Setting content: 1-12 / 0-59 / RESET
HOUR:
Adjust the hour.
MINUTE: Adjust the minute.
RESET: If the clock shows less than 30 minutes past, the
minute will be “0”; more than 30, the hour advances.
• The clock-adjusting mode is canceled when the power is turned off,
when [RETURN] is touched.
Setting Daylight Saving Time
Setting item: DAYLIGHT SAVING TIME
Setting content: OFF / ON
Place the Summer Time mode ON. The time advances by
one hour.
OFF: Return to the ordinary time.
ON:
Demonstration Function
This unit is equipped with a demonstration function capable of showing
basic operations of respective sources on the monitor display.
Setting item: DEMONSTRATION
Setting content: OFF / ON
Turns on the demonstration mode to show the basic
operations.
OFF: Turns off the demonstration mode.
ON:
• The demonstration operation is automatically repeated until the
function is turned off.
Sound (Beep) Guide Function
Setting item: BEEP
Setting content: OFF / ON
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is
pressed.
• A beep always sounds when opening or closing the monitor,
regardless of this setting.
35-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 36 Monday, January 15, 2007 4:02 AM
Setting the Scroll
This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as text information of MP3/WMA/AAC files,
folder names, tags, HD Radio and SAT Radio.
SYSTEM Setup
System Setup Operation
Setting item: AUTO SCROLL
Setting content: OFF / ON
Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed (only
when the scroll display cannot appear entirely).
ON:
To display the System mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Brake to bring your vehicle to a complete stop at a
safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• The display scrolls on the unit when the screen is filled up.
• Scroll display of the song, artist and album name is enabled when
iPod is connected.
Changing the Russian Font
Two type of font can be selected.
Setting item: LANGUAGE SELECT
Setting content: MODE1 / MODE2
MODE1: Usual font display (ISO8859-1)
MODE2: Russian font display (WINDOWS-1251)
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED DIMMER LEVEL
Setting level: -2 to +2
• The adjustment is available when ON or AUTO is set in “Setting the
Brightness of the Backlighting” (page 39).
• The adjusted brightness is reflected in the button lighting.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the System mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [
] of SYSTEM SETUP.
The SYSTEM setup screen appears.
3
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
IN INT. MUTE / IN INT. ICON / REMOTE SENSOR*1 /
NAV. IN / NAV. MIX*2 / AUX IN / AUX IN LEVEL*3 /
USB ADAPTER / CAMERA IN / AUX OUT / Bluetooth IN /
VISUAL KEY / SUBW. OUT*4 / OPTICAL OUT
*1 When ON is set in “Setting the Picture/Sound Output” (page
38), the item is displayed.
*2 When ON is set in “Setting the Navigation Mode” (page 37),
the item is displayed.
*3 When ON is set in “Setting the AUX Mode” (page 37), these
items are displayed.
*4 Not displayed when an extarnal audio processor is connected.
4
Touch [RETURN] to return to the previous screen.
• Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
36-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 37 Monday, January 15, 2007 4:02 AM
Setting the External Device Interrupt Mode
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-D105, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.
Setting item: IN INT. MUTE
Setting content: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
Setting the Interrupt Icon Display
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
Setting the Navigation Interruption
With an Alpine navigation system connected to the IVA-D105, the voice
guidance of the navigation system will be mixed with the radio or CD
play.
Setting item: NAV. MIX
Setting content: OFF / ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
See “Adjusting NAV. LEVEL:” under “Adjusting the Audio” on
page 27 to set the navigation interruption volume level.
Setting item: IN INT. ICON
Setting content: INT / TEL
• The volume level for voice prompts during navigation guidance is set
by adjusting the its volume while the prompts are announced. When
the announcement finishes, the normal audio volume and the
previous audio screen are restored. The voice prompt volume is
always at or below the current listening volume. If a navigation
announcement cuts in while adjusting the audio level, it always resets
to the current level regardless of the audio level setting.
• This setting is effective when NAV.IN of SYSTEM list screen is ON.
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Switching the function of the remote
sensor
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: REMOTE SENSOR
Setting contents: FRONT / REAR
FRONT:
REAR:
The remote sensor of this unit is effective.
The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
• The touch panel rear monitor sensor has priority over the remote
control sensor. If the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched, the
command is executed regardless of the remote control sensor switch
setting. Note, however, that the remote control sensor that has been
set takes priority if it has been 5 seconds since last touching the
panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to REAR, some soft button operations
( [ ] STOP, etc.) cannot be performed.
In this case, set the remote control sensor to FRONT.
Setting the AUX Mode
Setting item: AUX IN
Setting content: OFF / ON / VCR / GAME / TV / EXT. DVD /
EXTPLYR
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM set up, although the AUX name can be
changed, it is not displayed on the SOURCE selection screen.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected name is displayed on the VISUAL and REAR selection
screen.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
37-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 38 Monday, January 15, 2007 4:02 AM
Adjusting the External Input Audio Level
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Setting the USB Adapter to ON/OFF
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting content: OFF / ON
OFF: Does not display the USB source name on the SOURCE
select screen.
ON: Displays the USB source name on the SOURCE select
screen.
• If ON is set even when a CD changer is connected, the source name
on the SOURCE select screen will change from CD CHG to USB.
Setting the Bluetooth Connection
(Bluetooth IN)
Setting item: Bluetooth IN
Setting contents: NAV. / ADAPTER / OFF
select when an optional Portable Navigation is
connected.
Change voice line to RCA when TEL rings.
ADAPTER: select when an optional Bluetooth box is
connected.
When external interruption occurs, the display
changes to the TEL screen.
A source name of TEL on the SOURCE selection
screen is displayed.
OFF:
Select to ignore any external interrupts.
NAV.:
• For details on Bluetooth operation, refer to the Owner's Manual of
the Bluetooth Box.
Setting the VISUAL Button
Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
Switches directly to the navigation screen by pressing
VISUAL. (Only when an Alpine optional RGB
Navigation is connected.)
VISUAL: Recalls the VISUAL Select screen by pressing
VISUAL.
NAV.:
Setting the Rear Camera Input
With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON: Even if the shift lever is not set to reverse (R), the rear
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL “Setting the VISUAL Button”
(page 38).
Setting the Picture/Sound Output
Subwoofer On and Off
Setting item: SUBW. OUT
Setting contents: ON / OFF
ON: Subwoofer output is on.
OFF: Subwoofer output is off.
Setting the Digital Output
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Outputs the picture/sound of the source selected on the IVA-D105
connected to the rear monitor.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
Setting item: AUX OUT
Setting content: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
The “REAR SELECT” item is displayed on the SETUP
select screen.
Touch [
] of REAR SELECT to change to the REAR
select screen, then touch [ ] of the desired source. The
selected source picture/sound is output on the rear
monitor.
OFF: The “REAR SELECT” item is not displayed on the SETUP
select screen.
ON:
38-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 39 Monday, January 15, 2007 4:02 AM
DISPLAY Setup
Adjusting the Monitor Angle
Adjust the monitor’s angle (between 40 and 105 degrees) for optimum
visibility.
Display Setup Operation
To display the Display mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Display mode operation has been
released. Engaging the parking brake can reactivate the Display
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To display the Display mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Display mode screen.”
The following steps 1 to 4 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [
] of DISPLAY SETUP.
The DISPLAY setup screen appears.
3
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
TILT* / OPEN/CLOSE* / VISUAL EQ / DIMMER /
DIMMER LOW LEVEL / AUTO BACKGROUND /
BACKGROUND / DATA DOWNLOAD / BASE COLOR /
PULSETOUCH / SCREEN ALIGNMENT
* These functions are adjustable while driving.
4
Touch [RETURN] to return to the previous screen.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Setting item: TILT
Setting range: 10 adjustable angles are available.
• If the monitor touches an obstacle, remove the obstacle.
• The screen color will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
• If the voltage of the vehicle's battery power is low, the screen may
blink when the screen angle is changed. This is not a malfunction.
Setting Automatic Opening/Closing of the
Monitor
Setting item: OPEN / CLOSE
Setting content: MANUAL / FULL / CLOSE
MANUAL: The monitor is manually opened or closed by
pressing OPEN.
FULL:
The monitor automatically opens and closes when
the ignition key is turned to the “ACC” or “ON/OFF”
position.
CLOSE: The monitor automatically closes when the ignition
key is turned OFF.
Setting the Brightness of the Backlighting
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: DIMMER
Setting content: OFF / ON / AUTO
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
ON:
Keep the background illumination of the monitor dark.
AUTO: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
OFF:
• When ON or AUTO is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 36).
Adjusting the Minimum Level of Backlight
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: DIMMER LOW LEVEL
Setting content: -15 to +15
You can adjust the level between -15 and +15.
39-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 40 Monday, January 15, 2007 4:02 AM
Switching Background Textures
You have a choice of background textures you can set.
Setting item: BACKGROUND
Setting content: MODE1 / MODE2
• This operation can be carried out after removing the disc from the
unit or when playback of the disc has stopped.
• Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 42) are recalled.
• When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
• When an error message is displayed (ERROR, HI-TEMP, etc.),
background textures selected by this setting cannot be displayed on
the unit.
Setting Automatic Background Textures
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content: / RESET
1 Touch [
] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the
mark, touch
[RESET] to restore the adjustment screen to the initial setting.
• If you touch [RETURN] on the adjustment screen, no adjustment is
done and the DISPLAY setup screen is restored.
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1
MODE2
OFF: Turn off the Auto Background Texture Scroll mode.
ON:
• Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 42) are recalled.
Switching the Font Background Color
You can choose from 5 different colors for the font background.
Setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
Turning the Touch Panel Vibration ON or
OFF
You can turn the touch panel’s vibration ON or OFF during operation.
Setting item: PULSETOUCH
Setting content: OFF / ON
OFF: Turns off vibration during operation.
ON: Turns on vibration during operation.
40-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 41 Monday, January 15, 2007 4:02 AM
Adjusting Brightness
VISUAL EQ™
Setting item: BRIGHT
Setting content: -15 ~ +15
Visual EQ Setting Operation
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
The following steps 1 to 4 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details
1
After steps 1 and 2 in “Display Setup Operation”
(page 39) have been performed, touch [
] of
VISUAL EQ.
VISUAL EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ*
SHARP*
BRIGHT
COLOR*
USER PRESET*
TINT*
CONTRAST
* The setting is available in the visual source mode. (except navigation
screen)
3
4
Change the setting on the selected item by touching
its [ ] or [ ].
Touch [RETURN] to return to the previous screen.
Selecting the VISUAL EQ Mode (Maker’s
setting)
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
OFF (FLAT): Initial Setting
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 42).
P-2:
Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 42).
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car's interior lighting as
long as AUTO is set in “Setting the Brightness of the Backlighting”
(page 39).
Adjusting Color of Picture
Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
• Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Adjusting Tint of Picture
Setting item: TINT
Setting content: G15 ~ R15
Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When the picture from the external input is set to PAL, you cannot
adjust the TINT.
Adjusting Image Contrast
Setting item: CONTRAST
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
• When any NIGHT M. to CONTRAST setting item is selected, image
contrast is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 39).
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
41-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 42 Monday, January 15, 2007 4:02 AM
Adjusting Picture Quality
Data Download
Setting item: SHARP
Setting content: -15 to +15
Adjustment of picture quality is done in the range of -15 to +15.
• Picture quality adjustment can be made only in the navigation, DVD,
Video CD, AUX modes.
• Picture quality adjustment cannot be made if a navigation system
with the RGB feature is connected.
Storing VISUAL EQ
You can store the settings made for “Adjusting Image Brightness, Tint,
Depth, picture Quality and Contrast.”
Downloading the BACKGROUND data
You can download data (from Alpine’s website) to a CD-R/CD-RW
(data is written in the root folder), and store the data to the IVA-D105.
To start BACKGROUND download, access the URL below and follow
the on-screen instructions.
http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au
1
Setting item: USER PRESET
Setting content: P-1 / P-2
1 After completing “Adjusting Brightness, Tint, Depth,
Picture Quality, and Contrast” (pages 41 and 42), touch
[ ] or [ ] of USER PRESET and then select preset No.
“P-1” or “P-2” to which the settings are to be stored.
2 After selecting a preset No., touch [MEMORY].
The adjusted VISUAL EQ mode is stored by the above
operations.
• You can recall the VISUAL EQ mode stored here from P-1 or P-2 of
“Selecting the VISUAL EQ Mode (Maker’s setting)” (page 41).
Insert the CD-R/CD-RW disc containing the data you
need.
Data search of the disc starts. After completing the data
search, the file selection screen of Data Download is
displayed.
2
3
After steps 1 and 2 in “Display Setup Operation”
(page 39) have been performed, touch [
] of DATA
DOWNLOAD.
Touch [ ] or [ ], then select P-1 or P-2.
The selected wallpaper can be changed.
4
5
Touch [ ] or [ ] to select the desired file name.
Touch [MEMORY].
Data download starts.
When data downloading has completed correctly, the
screen returns to the DATA DOWNLOAD screen.
6
Touching [RETURN] returns to the previous screen.
• For details about procedures of download, see ALPINE’s Web site.
• If data is newly downloaded, the data overwrites the previous data.
• If the battery power cable is removed, the downloaded data is
memorized.
• You can recall a wallpaper in “Switching Background Textures”
(page 40), or “Setting Automatic Background Textures” (page 40).
• When download has completed, remove the disc.
42-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 43 Monday, January 15, 2007 4:02 AM
Adjusting Sound
The unit includes a function to create better sound in a car enviroment.
The BassEngine menu lets you select standard adjustments as well as
5.1 surround sound settings. If the unit is connected to an optional
external processor, the adjustment will be made by A.PROCESSOR.
Adjustment can only be made after you have brought your vehicle to a
complete stop in a safe location.
To display the BassEngine or Audio processor mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the BassEngine or Audio processor
mode operation has been released. Engaging the parking brake
can reactivate the BassEngine or Audio processor mode, as long
as the car’s ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of “To display the
BassEngine or Audio processor mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the BassEngine or Audio processor mode screen.”
Setting items :
X-OVER / T.CORR / DOLBY PLII /REAR FILL /
SPEAKER SELECT / MULTH CH SETUP / SPEAKER SETUP /
BASS SOUND CONT. / USER PRESET
5
Touch [RETURN] to return to the previous screen.
External Audio Processor
Operation
External Audio Processor (Optional)
When an external audio processor is connected to this unit, you can
operate it from this unit. Some audio processors may not be operated.
In this case, operate them in the connected product. Explanations below
is the case when PXA-H700 or PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the MRAD550 is connected. Additionally, if the MRA-F350 is connected, the
following setting “Setting the MX mode” is not available. Also, the
setting content differs between the PXA-H700 and PXA-H701.
• This unit cannot be connected to the PXA-H510 and PXA-H900.
BassEngine Operation
BassEngine Operation
: the following settings can be made for standard
BassEngine on the unit.
• The settings can be made by the BassEngine only when in multichannel playback. However, the front/rear HPF setting for the XOVER adjustment can be made even when not in multi-channel
playback.
Following Steps 1 to 5 describe the common procedures for
operating the BassEngine setting function. For details of the
setting function items, refer to descriptions of respective items.
1
Check the Defeat mode is off (page 27), and then
touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [
] of AUDIO.
The AUDIO setup screen appears.
3
Touch [
] of BassEngine.
The BassEngine list screen appears.
4
Touch [
setting.
] etc., of the desired item to change its
43-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 44 Monday, January 15, 2007 4:02 AM
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
1
: the following settings can be made for an external audio
processor.
Following Steps 1 to 5 describe the common procedures for
operating the Audio Processor setting function. For details of
the setting function items, refer to descriptions of respective
items.
1
The SETUP selection screen is displayed.
Speaker Setup (page 48)
(Turning the speakers to be used on and off and
setting their response)
Check the Defeat mode is off (page 27), and then
touch [SETUP] on the main source screen.
2
Touch [
] of AUDIO.
The AUDIO setup screen appears.
3
Touch [
] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
2
3
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
Mixing bass sound to the rear channel
(page 49)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
4
Touch [ ] [ ] or [
change its setting.
] of the desired item to
Setting items :
X-OVER / T.CORR / PHASE / G-EQ / P-EQ / MEDIA XPANDER /
BASS SOUND CONT. / DOLBY PLII /REAR FILL / SPEAKER
SELECT / MULTI CH SETUP / SPEAKER SETUP / DVD LEVEL /
PCM MODE / USER PRESET
5
Touch [RETURN] to return to the previous screen.
Setting the Speakers
Setting item : SPEAKER SELECT
4
5
Adjusting the acoustic image (page 49)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
6
7
Adjusting the DVD Level (page 50)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Set the connected speaker by touching the respective
[ ] or [ ] button.
BassEngine
FRONT:
REAR:
CENTER:
SUBW.:
ON Fixed
OFF/ON
OFF/ON
OFF/ON
A.PROCESSOR
FRONT1:
FRONT2:
REAR:
CENTER:
SUBW.:
OFF/FULL (Full Range)/TW (Tweeter)
OFF/ON
OFF/ON
OFF/ON
OFF/MONO/STEREO
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 48).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Storing Settings in the Memory (page 50)
(Storing all the settings and adjustments made on the
IVA-D105 (not only the above settings/adjusts) in the
memory)
In case of combining the Automatic adjustments, etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
44-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 45 Monday, January 15, 2007 4:02 AM
Set MX Mode of the External Audio
Processor
X-OVER Adjustment
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
BassEngine
Setting item : X-OVER
Setting item : MEDIA XPANDER
High pass filter can be applied to front/rear speakers, and low pass filter
can be applied to the subwoofer.
1
1
Select ON or OFF of MX by touching [ ] or [ ] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
2
Touch [
] after setting to ON.
The Media Xpander setup screen appears.
3
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3) / MX SAT (OFF, SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disk contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for AM radio.
• MX CMPM is applied for MP3/WMA/AAC and iPod.
• MX SAT is applied for XM, SIRIUS, HD Radio.
• The MX setting can be performed only when a source is currently
selected.
Touch [ ] or [ ] of the speaker to make the desired
adjustment.
• If you set the subwoofer LPF, set the front/rear HPF to OFF, or set
the rear/front speaker to “LARGE” in “Speaker Setup” (page 48).
The frequency you set for the subwoofer LPF will automatically be
applied for the speaker that is set to “SMALL” for the HPF.
Therefore, certain frequencies may not be reproduced.
A.PROCESSOR
1
Touch [ ] or [ ] of X-OVER to select L/R or L+R.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
2
3
Touch [
] of X-OVER.
Touch [
] of the speaker to be adjusted.
The screen changes to the X-OVER screen to be adjusted.
4
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Touch [ ] or [ ] of FREQ., then select the cut-off
frequency (crossover point).
The adjustable bandwidth differs depending on the speaker
(channel).
Adjusting the Level
Touch [ ] or [ ] of LEVEL, then adjust the HPF or LPF
level.
Adjusting the Slope
Touch [ ] or [ ] of SLOPE, then adjust the HPF or LPF
slope.
• When the speaker is set to the “OFF” mode, the X-OVER for that
speaker cannot be set. Refer to “Setting the Speakers” (page 44).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The H.P.F. filter cannot be set to OFF (slope OFF) if Tweeter is
selected for FRONT1 . Or, only the subwoofer is adjustable if
STEREO is selected for the subwoofer.
45-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 46 Monday, January 15, 2007 4:02 AM
Performing Time Correction Manually
(TCR)
Because of the particular conditions inside the vehicle, there can be
major differences in the distances between the various speakers and the
listening position. It is possible to calculate the optimum correction
values and eliminate the time error at the listening position yourself
using this function.
5.1ms
0.5m
2.25m
Setting item : T.CORR
1
2
3
Check that Defeat mode is off.
Sit in the listening position (the driver’s seat, for
example) and measure the distance (in meters)
between your head and the various speakers.
Calculate the difference in distance between the
farthest speaker and the other speakers.
L=
4
(distance of farthest speaker)
– (distance of other speakers)
The sound is uneven because
the distance between the
listening position and the
different speakers is different.
The difference in the distance
between the front left and rear
right speakers is 1.75 meters
(68-3/4").
Divide the distances calculated for the different
speakers by the speed of sound (343 m/s
temperature 20°C).
This value is the time correction value for the various
speakers.
Concrete examples
Calculating the time correction value for the front left speaker on
the diagram below.
Conditions:
Distance between farthest speaker and listening position:
2.25 m (88-3/4")
Distance between front left speaker and listening position:
0.5 m (20")
Calculation:
L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4")
Compensation time = 1.75 ÷ 343 x 1000 = 5.1 (ms)
In other words, setting the time correction value for the front left
speaker to 5.1 (ms) sets a virtual distance matching the
distance to the farthest speaker.
Time correction eliminates
the difference between the
time required for the sound
from the different speakers to
reach the listening position.
Setting the time correction of
the front left speaker to 5.1
ms makes it possible to
coordinate the distance from
the listening position to the
speaker.
BassEngine
5
Adjust the correction value (0.0 ~ 20.0ms) of a
desired speaker by touching the respective [ ] or
[ ] button. (1 step = 0.1ms)
A.PROCESSOR
5
Touch [ ] or [ ] of T.CORR.
Select L/R or L+R.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
6
Touch [
] of T.CORR.
The T.CORR adjustment screen appears.
7
Adjust the time correction value (0.0 ~ 20.0ms) of a
desired speaker by touching the respective [ ] or
[ ] button. (1 step = 0.05ms)
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 44).
• The adjustment value for FRONT2 (Speakers) which is adjusted in
time correction, is also applied to the front speakers in “Setting Bass
Focus” (page 48).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
46-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 47 Monday, January 15, 2007 4:02 AM
Phase Switching
Parametric Equalizer Adjustments
Setting item : PHASE
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s center frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
Switch the phase (0° or 180°) by touching [ ] or [ ] of
the desired speaker.
Graphic Equalizer Adjustments
Setting item : P-EQ
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and center
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
Setting item : G-EQ
1
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
When parametric EQ is adjusted, this setting will be turned
off.
2
Touch [
] of G-EQ.
The G-EQ list screen appears.
3
Touch [
] of the desired speaker (channel).
The G-EQ adjustment screen appears.
4
When graphic EQ is adjusted, this setting will be turned off.
Select L/R or L+R by touching [ ] or [ ] of G-EQ.
L/R:
Adjust the G-EQ to your preference.
Adjusting the Level
Touch [ ] or [ ] of the desired frequency to adjust the
level.
• When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 44).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
Select L/R or L+R by touching [ ] or [ ] of P-EQ.
2
Touch [
] of P-EQ.
The P-EQ list screen appears.
3
Touch [
] of the desired speaker (channel).
The P-EQ adjustment screen appears.
4
Adjust the P-EQ to your preference.
Selecting the Band
Touch [ ] or [ ] of BAND.
Select the desired band.
Adjusting the Frequency
Touch [ ] or [ ] of FREQ., then adjust the frequency of
the selected band.
Adjusting the Level
Touch [ ] or [ ] of LEVEL, then adjust the level of the
selected band.
Setting the Bandwidth
Touch [ ] or [ ] of Q.
Select the bandwidth.
• When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 44).
• It is not possible to adjust the frequencies of adjacent bands within 7
steps.
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
47-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 48 Monday, January 15, 2007 4:02 AM
Setting Bass Sound Control
Setting item : BASS SOUND CONT.
Touch [
] of BASS SOUND CONT.
The Bass Sound Cont. screen appears.
Setting Bass Compressor
You can adjust the sound of low frequencies as desired.
Touch [ ] or [ ] of BASS COMP. to select the desired
mode.
Bass sound is emphasized more as the mode is sequentially
switched as MODE1
2
3, offering you vivid low
frequencies.
Select OFF when the setting is not necessary.
Touch [RETURN] to return to the previous screen.
Setting Bass Focus
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rear/left-right speakers.
Namely, it enables a time correction based on your preference. With an
initial delay of 0.1 ms (when setting the A.PROCESSOR mode:
0.05 ms) for each of the 0 to 200 steps (when setting the
A.PROCESSOR mode: 0 to 400 steps), audible time correction can be
achieved.
Set the delay number in the front and rear, and on the
right and left of the desired speaker by touching the
respective [ ] or [ ] button.
• Any setting in Bass Focus is applied in time correction, too.
• Touch [RETURN] to return to the previous screen.
Speaker Setup
Check the playable frequency range of the speakers (not including the
subwoofer) before performing this operation to verify whether the
speakers can play low frequencies (of about 80 Hz or less).
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if Decode mode is switched.
Setting item : SPEAKER SETUP
Select the speaker characteristic by touching [ ] or [ ]
of the desired speaker setting.
OFF*1:
SMALL:
When no speaker is connected.
When a speaker that cannot play low frequencies
(80 Hz or less) is connected.
LARGE*2: When a speaker that can play low frequencies (80
Hz or less) is connected.
*1 It is not possible to set the front speakers to “OFF”.
*2 If the front speakers are set to “SMALL”, the rear and
center speakers cannot be set to “LARGE.”
• The Subwoofer can be set only to ON/OFF.
• If the center speaker is turned “OFF,” the center channel’s audio
signals are added to the audio signals output from the front speakers.
• If you set the speaker response to “OFF,” also set the speaker setting
to “OFF.” (page 44)
• Perform the setup for all the speakers (“Front,” “Center,” “Rear”
and “Subwoofer”). If not, the sound may not be balanced.
• When center is set to “OFF”, the setting is ineffective even if center
is set with this function.
• Through changing the settings on each speaker, a change in the
output of the other speakers may occur due to the setting
requirements.
• When using the PRO LOGIC II, if the rear speaker is set to
“LARGE”, then there will be no output from the subwoofer.
• The PXA-H700 or PXA-H701 can be set according to the playable
frequency range of your speakers.
Setting of Dolby Digital
Setting item : MULTI CH SETUP
Touch [
] of MULTI CH SETUP.
The MULTI CH SETUP display appears.
Set the items below as you desire.
48-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 49 Monday, January 15, 2007 4:02 AM
Adjusting the acoustic image
(BI-PHANTOM)
In most installations, the center speaker must be placed directly between
the front passenger and driver. Using this function, the center channel
information is distributed to the left and right speakers. This creates an
acoustic image simulating a center speaker directly in front of each
listener. Adjusting the center width in PL II MUSIC (see “Using the Pro
Logic II Mode,” page 50), makes this function ineffective.
Adjusting the speaker levels (OUTPUT
LEVEL)
The test tones help to make the volume adjustments of the different
speakers. When levels are equal, a strong sense of presence can be heard
from the different speakers at the listening position.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the decode mode is switched.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
1 Touch [AUTO] of OUTPUT LEVEL.
Test tone output is repeated for each of the different
speaker channels. They will be repeated in the order
shown below.
If no operation is performed for 2 seconds, the channel
switches to the next channel.
Touch [ ] or [ ] of BI-PHANTOM to adjust the level.
The level can be adjusted within the range of -5 to +6 (when
setting the A.PROCESSOR mode: -5 dB to +5 dB). The higher
the level, the more the position of the center speaker is shifted to
the sides.
The BI-PHANTOM function is turned off by touching [OFF].
Left
Center
Left surround
This function mixes the front channel audio signals to the audio signals
output from the rear speakers, improving the sound in the vehicle’s rear
seat.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
Touch [ ] or [ ] of REAR MIX to adjust the level.
The level can adjusted in five steps: -6, -3, 0, +3 and +6. The
higher the level, the more bass is output from the rear speakers.
(The effect differs according to the software (DVD, etc.).)
The REAR MIX function is turned off by touching [OFF].
• This adjustment is ineffective when the rear speaker setup setting is
set to “OFF.”
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• The adjustment range for the different speakers is
–6 dB - +6 dB (when setting the A.PROCESSOR mode:
–10 dB to +10 dB).
• Adjust based on the front speakers.
• If a speaker is set to off mode, that speaker’s level adjustment cannot
be made.
Refer to “Speaker Setup” (page 48).
• When this setting is mode using Bass Engine, perform this with no
disc inserted in the unit.
Setting the Output Channel (OUTPUT
MODE)
The sound output mode of the internal DVD player can be switched
between 2CH and 5.1CH.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
Touch [ ] or [ ] of OUTPUT MODE to select AUTO or
STEREO.
The sound output mode will automatically be
switched between 2CH and 5.1CH according the
number of channels available on the disc to be
played and the contents of the SETUP items.
STEREO: The sound output mode will exclusively be switched
to 2CH regardless of the number of channels on the
disc and its SETUP item contents.
When STEREO is set, rear and front output is the
same.
AUTO:
Achieving powerful high volume sound
(LISTENING MODE)
With Dolby Digital, the dynamic range is compressed so that powerful
sound can be achieved at regular volume levels. This compression can
be canceled to achieve an energetic sound with even greater power, like
the sound in a movie theater.
This function works only in the Dolby Digital mode.
Touch [
] or [
] of LISTENING MODE to select STD or MAX.
STD: For powerful sound at regular volume levels
MAX.: For powerful sound at high volumes
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
Right Surround
2 While the test tone is being produced from the speakers,
touch [ ] or [ ] of OUTPUT LEVEL balance the output
from all the speakers.
• This adjustment is effective when the setting of the center speaker to
SMALL or LARGE in the speaker setup settings.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 44).
Mixing bass sound to the rear channel
(REAR MIX)
Right
Left
• If this setting is switched from AUTO to STEREO, the front speaker
setting of SPEAKER SETUP is switched to “LARGE.”
• Depending on the AUTO or STEREO setting, adjusting BASS/TRE,
T.CORR, Bass Sound Cont. contents cannot be made. Also operation
cannot be performed.
Disc
OUTPUT
MODE
2CH
STEREO
MULTH CH STEREO
DOLBY 2CH AUTO
DTS 2CH
BASS/TRE
T.CORR
–
–
Bass Sound
Cont.
–
–
–
49-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 50 Monday, January 15, 2007 4:02 AM
Adjusting the DVD Level
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
Setting item : DVD LEVEL
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
Adjust the level by touching [ ] or [ ] of the desired
adjusting mode.
The level can be adjusted in the range of –5 to +5.
Storing Settings in the Memory
Adjustment or setting contents can be stored.
Contents that can be stored vary depends on the audio processor used.
Setting item : USER PRESET
1
2
Touch [ ] or [ ] of USER PRESET to select any one
of the preset buttons (P-1 through P-6).
Touch [MEMORY].
The setting contents are stored.
• The stored contents will not be deleted even when the battery power
cord is detached.
Recalling the Preset Memory
Touch [ ] or [ ] of A.PROCESSOR to select the preset
memory you want to recall from P-1 through P-6.
• It takes a few moment to recall the preset memory.
Using the Pro Logic II Mode
If PL II MUSIC is selected, the center width can be adjusted with
following operations.
This function offers the optimum vocal position by adjusting the
center channel position between the center speaker and the L/R
speaker. (The adjustments established in “Adjusting the
acoustic image (BI-PHANTOM)” (page 49) are ineffective while
this function is activated.)
Touch [ ] or [ ] of CENTER WIDTH CONT. to adjust the
level.
The level can be adjusted between 0 to 7. When the level
increases, the center channel position moves from the
center speaker position to both sides.
Touch [OFF] of CENTER WIDTH CONT. to turn off the
center width control.
• The setting can be made only when an external audio
processor is connected.
When the Bass Engine mode is set, the level setting is fixed to
“3.”
• This adjustment is effective when the setting of the center speaker is
SMALL or LARGE in the speaker setup settings.
• “REAR FILL” function
Depending on the input signals, the sound may only be output from
the front speakers. In this case, the “REAR FILL” function can be
used to output signals from the rear speakers as well.
• If REAR FILL is set, 192kHz, 96kHz, etc., contents are down sampled
to 48kHz.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 44).
• This function only works with two-channel signals. This operation is
ineffective when 5.1-channel DTS or Dolby Digital signals are input.
• If the setting of REAR FILL is made when REAR MIX is ON, sound is
unchanged in the rear fill setting because REAR MIX is given priority
during 2 channel decoder other than linear PCM.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• Touching [RETURN] will return to the previous screen.
Linear PCM Setting
The output when playing discs recorded in linear PCM can be set to 2 or
3 channels.
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a “REAR
FILL” function for outputting the signals of the front channel to the rear
channel.
Setting item : PCM MODE
Touch [ ] or [ ] of PCM MODE to select 2 CH or 3 CH.
2CH: 2ch output (L/R)
3CH: 3ch output (L/R/CENTER)
Setting item : DOLBY PLII/REAR FILL
Touch [ ] or [ ] of DOLBY PLII/REAR FILL to select the
desired mode.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 44).
PL II MOVIE: Suits the stereo TV shows and all programs
encoded in Dolby Surround. It improves the
sound field directivity to near that of discrete
5.1-channel sound.
PL II MUSIC: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
OFF:
Turns DOLBY PL II function to OFF.
PANORAMA: Widens the soundstage of the front stereo Image
(BassEngine to extend to the surround speakers.
only)
50-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 51 Monday, January 15, 2007 4:02 AM
Navigation System
(Optional)
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the IVA-D105,
the Navigation screen can be displayed on this unit.
1
.
Touch [NAV.].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner’s Manual of the
navigator.
• While the Navigation selection mode is being selected in “Setting the
VISUAL Button” (page 38), the navigation mode will be directly
activated.
• Use the “Setting the VISUAL Button” function (page 38), to select
“Nav.”. The navigation mode becomes directly activated using the
VISUAL Button.
• When the Navigation System is on, the audio and visual navigation
cuts in.
• For operation, if a navigation system with touch panel operation is
connected, refer to the Owner’s Manual of the navigation system.
Portable Navigation System Operation
(Optional)
An optional Alpine Portable Navigation System is controllable from the
unit. For details, refer to the Owner's Manual of the Portable Navigation
System.
With using the docking station type
(BLACKBIRD Series)
For details on the connectable Portable Navigation, consult your Alpine
dealer.
1
2
Operating Auxiliary Devices (Optional)
To operate your devices connected to the AUX terminals on the rear
panel of IVA-D105, follow the procedure described below.
WARNING
Press SOURCE/
The source screen appears on the display.
2
Auxiliary Device
(Optional)
Select EXTPLYR in “Setting the AUX Mode”
(page 37).
It is dangerous (and illegal in many states) for the driver to
watch the TV/Video while driving the vehicle. The driver may
be distracted from looking ahead and an accident could
occur.
Install the IVA-D105 correctly so that the driver cannot watch
TV/Video unless the vehicle is stopped and the emergency
brake is applied.
If the IVA-D105 is not installed correctly, the driver will be
able to watch the TV/Video while driving the vehicle and may
be distracted from looking ahead and cause an accident.
The driver or other people could be severely injured.
To activate your auxiliary devices:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the AUX mode operation has been
released. Engaging the parking brake can reactivate the AUX
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To activate your auxiliary devices.”
Each time the ignition is turned OFF, perform the procedure of “To
activate your auxiliary devices.”
• If you try to activate the auxiliary device while driving, the
display will show the warning-PICTURE OFF FOR YOUR
SAFETY.
Mount the Portable Navigation device to the optional
docking station.
The connection to the Portable Navigation is recognized by
performing steps 1 and 2.
3
Press SOURCE/
.
The SOURCE selection screen is displayed.
4
Touch [NAV.].
For details, refer to the Owner’s Manual of the Portable
Navigation System.
51-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 52 Monday, January 15, 2007 4:02 AM
1
Press SOURCE/
.
The source screen appears on the display.
2
Touch [AUX]*.
The external input screen is displayed.
* The name which is given as the source name in “Setting the AUX
Mode” on page 37 is displayed.
• If the AUX mode is not displayed on the main menu, set AUX IN to
ON by following “Setting the AUX Mode” (page 37).
• The display mode changes by touching [WIDE].
For operation, refer to “Switching Display Modes” on page 28.
• When the KCA-410C is connected, the AUX input of the KCA-410C
can be used only in INTERRUPT MODE. For details, refer to the
KCA-410C Owner’s Manual.
Changer
(Optional)
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to the
IVA-D105 if it is Ai-NET compatible. With a CD Changer connected to
the Ai-NET input of the IVA-D105, the CD Changer will be
controllable from the IVA-D105.
If you connect a changer compatible with MP3, you can play CDROMs, CD-Rs, and CD-RWs containing MP3 files on the IVA-D105.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the IVA-D105.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 53).
1
2
Press SOURCE/
.
Touch [CD CHG].
The display changes to the CD changer mode screen.
• The source name in the display changes from CD CHG to USB when
“Setting the USB Adapter to ON/OFF” (page 38) is set to ON.
When a 6 Disc CD Changer is connected;
1 Touch [PAGE1/2]*.
The Function Guide display appears.
* When an MP3 compatible CD changer or DVD changer is
connected, touch repeatedly until the disc number is displayed.
2 Touch any one of the select buttons [D-1] through [D-6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [PAGE1/3] twice to change the Function Guide
display.
2 Touch any one of the select buttons [D-1] through [D-6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Touch [PAGE1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that D-7 through
D-12 represent disc numbers 7 to 12.
• After selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA section.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the IVA-D105 as
well as the CD changer.
52-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 53 Monday, January 15, 2007 4:02 AM
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers.
1
2
In changer mode, touch [CHG SEL] or press BAND
on the unit to select the next changer (connected CD
changers only) .
SAT Radio Receiver
(Optional)
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is connected
via the Ai-NET bus, the following operations may be
performed. However, the XM Receiver and SIRIUS Receiver
cannot be connected at the same time.
To operate the selected changer, see “CD/MP3/WMA/
AAC” section.
Receiving Channels with the SAT
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
to 100 digital channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-coast via satellite.
For more information, visit XM’s website at www.xmradio.com., and
SIRIUS’ website at www.sirius.com.
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will
be required. For details, consult you nearest ALPINE dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the IVA-D105 are operative only when
a SAT Receiver is connected.
1
Press SOURCE/
.
The SOURCE selection screen is displayed.
2
Touch [XM] or [SIRIUS].
The XM or SIRIUS main screen display appears.
3
Press BAND to select the desired band.
XM radio:
XM-1
XM-2
SIRIUS radio:
SIRIUS-1
4
XM-3
SIRIUS-2
XM-1
SIRIUS-3
SIRIUS-1
Touch [TUNE] to select the channel number tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning
channel name tuning
5
Touch [ NO.] / [NO. ] or [ NAME] or
[NAME ] to select the desired channel. Holding
either button down will change channels
continuously.
• To customers when connecting the SIRIUS Tuner Box:
For detailed functions, refer to the SIRIUS Tuner Box installation
manual.
• The band can also be changed by touching [BAND] on the function
guide.
• For SIRIUS Setup operation, refer to page 57-58.
53-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 54 Monday, January 15, 2007 4:02 AM
Tuning in to Categorized Programs
Checking the SAT Radio ID Number
You can listen to programs categorized to the same group one after
another.
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
In the XM or SIRIUS mode, touch CATEGORY [ ] or [ ]
to select a desired category.
XM Radio:
The first channel of the selected category is tuned.
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
• If the desired category program is not found, the “--------” is
displayed for 2 seconds, then the receiving program is restored.
SIRIUS Radio:
Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text information as explained below.
This number is a 12-digit numeric number. It is printed on a label found
on the SAT Receiver.
It can also be displayed on the screen of the IVA-D105 in the following
way.
1
Touch [INFO.] on the XM or SIRIUS mode main screen.
Each time you touch this button, the display changes as shown
below.
XM mode:
Information
display
*
Auxiliary Data
Field
SIRIUS mode:
While receiving SAT Radio, touch [ NO.] or
[NO. ] to select channel ‘0’ for XM and channel
“255” for SIRIUS.
The unit display the ID number.
2
3
The unit displays the ID number.
To cancel the ID number display, change the
channel.
• You cannot use “O,” “S,” “ I,” or “F” for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
Storing Channel Presets
* Channel name, category, title name, etc., are displayed in one screen.
1
Touch [PAGE1/3] after selecting a desired band.
The Function Guide is switched.
2
3
Touch and hold any one of the preset buttons [P-1]
through [P-6] for at least 2 seconds. The selected
channel is stored.
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or SIRIUS1,
SIRIUS2 and SIRIUS3 ).
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Receiving Stored Channels
1
Touch [PAGE1/3] after selecting a desired band.
The Function Guide is switched.
2
Touch any one of the preset buttons [P-1] through
[P-6] that has your desired satellite channel in
memory.
54-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 55 Monday, January 15, 2007 4:02 AM
Search Function (XM mode)
Search Function (SIRIUS mode)
1
1
In XM mode, touch [
].
The category title list is displayed.
Screen example for category search list
Touch [
] in the SIRIUS mode.
SEARCH menu list is displayed.
2
Select the desired SEARCH menu.
Searching by Category
1 Touch [
] of CATEGORY.
The CATEGORY search screen is displayed.
• Touch [
] to receive the selected category channel directly.
2 Touch [
] to change to channel name search screen of
the selected category.
3 Touch [ ] to receive the selected channel name.
Touch [ ] to receive the selected category channel
directly.
Scrolls the page list up or down.
Searching by Channel Name
1 Touch [
] of CHANNEL.
The CH search screen is displayed.
2 Touch [ ] to receive the selected channel name.
(Displayed when the list items cannot be displayed entirely.)
Scrolls the list item by item.
Touching and holding will scroll continuously.
[
Searching by Artist Name
1 Touch [
] of ARTIST.
The artist name of each channel is displayed in order of
channel number.
2 Touch [ ] of the desired artist.
The channel of the selected artist being broadcast is
received.
] is displayed if there is a hierarchical list.
Touch [
] to change the channel name search screen of
the selected category.
Screen example for channel name search list
Searching by Song Name
1 Touch [
] of SONG.
The song name of each channel is displayed in order of
channel number.
2 Touch [ ] of the desired song.
The channel of the selected song being broadcast is
received.
2
The selected channel is received.
Returns to the category search list.
Selecting the Channel directly
Touch [ ] of the selected Category or Channel
name.
You can directly select the channel number on the display of the
numeric keypad.
The channel in the selected category is tuned.
• When the channel number is selected, the channel is displayed in
order of channel number. When the channel name is selected, the
channel is displayed in alphabetical order.
1
Touch [PAGE1/3] twice in the XM or SIRIUS mode.
The function guide appears.
2
Touch [10KEY].
The numeric keypad input screen is displayed.
3
4
Touch to input the channel number.
Touch [ENT].
The selected channel is received.
55-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 56 Monday, January 15, 2007 4:02 AM
Receiving Weather or Traffic information
from SAT Radio
Storing favorite Sports Teams (SIRIUS
mode only)
1
One team from each league can be stored on the unit. When stored, their
game status and results are announced when other stations are being
listened to, and if you wish, you can go to the station where the game is
being broadcast. (Refer to “Receiving the stored information” on page
56.)
Touch [PAGE1/3]* twice in the XM or SIRIUS mode.
The function guide appears.
* Touch ones during the SIRIUS mode.
2
Touch and hold [BAND] for at least 2 seconds.
The received weather or traffic channel is stored.
3
The stored Weather or Traffic channel is recalled.
4
• Stored channels can also be recalled by pressing and holding BAND/
SAT for at least 2 seconds on the unit, even in modes other than XM
or SIRIUS mode.
• Channels other than Weather. or Traffic information can also be
stored and recalled.
Storing the desired Song/Artist (SIRIUS
mode only)
A maximum of 30 desired songs and artists (including sports teams) can
be stored on the unit. When stored, a message is displayed to announce
when stored songs are being broadcast on another radio station, should
you wish to listen to it. (Refer to “Receiving the stored information” on
page 56.)
Touch [PAGE1/3] twice times to store an artist or
song currently being received.
2
Touch [MEMORY].
The SONG ALERT or ARTIST ALERT SETUP is displayed.
3
Touch [ ] of the SONG or ARTIST in the list you
want to store.
The selected songs and artists are registered.
• “UNABLE TO STORE” appears in the display if there is no song title
information and it cannot be stored.
• If there is no memory, “MEMORY FULL” is displayed for 2 seconds,
and then the display changes to the ALERT list. Touch [ ] of the
song or artist you want to rewrite. message is displayed. If “OK” is
touched, the song or artist is rewritten and stored. If “NO” is
touched, it is canceled.
• If [MEMORY] is touched and held for at least 2 seconds, the display
changes to the ALERT SETUP screen.
Touch [ ] or [ ] of the channel you want to set. If you want
ALERT interruption, set to ON, if not, set to OFF.
• If Sports/team is stored, touch [A.LIST] to change to the SIRIUS
SETUP screen, then touch [
] of ALERT LIST. Touch [ ] or [ ]
of the channel to be set, and set the receiving interruption to ON/
OFF.
Touch [MEMORY].
The display changes to the GAME ALERT screen. Both the
selected team and opponent team names are displayed.
3
Touch [
] of the team you want to store.
The selected team is registered.
• “UNABLE TO STORE” will be displayed if the above information
cannot be stored.
• Touch [A. LIST] to change to the SIRIUS SETUP screen, and then
touch [
] of ALERT LIST. Set the receiving interruption type
(INITIAL/SCORE/OFF) by touching [ ] or [ ] of the channel you
want to set.
Receiving the stored information
(SIRIUS mode only)
When stored sports team, song or artist is being broadcast, a message
appears and it is announced. The broadcasting channel can be received.
1
The function guide is changed.
2
Touch [PAGE1/3] twice to store a game currently
being broadcast.
The function guide is changed.
Press and hold BAND/SAT for at least 2 seconds on
the unit.
Returns to the normal mode.
1
1
Press and hold BAND/SAT for at least 2 seconds on
the unit.
2
When stored information is broadcast, after
displaying “SONG ALERT”, “ARTIST ALERT” or
“GAME ALERT,” the screen changes to the list
display.
Touch [ ] of the channel on the list you want to
receive.
The display changes to the selected channel and the
channel is received.
• If [RETURN] is touched, return to the previous screen.
• If no operation is performed for 10 seconds the screen returns to the
main menu.
56-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 57 Monday, January 15, 2007 4:02 AM
Offset Playback Function (SIRIUS mode
only)
If the SIRIUS radio is interrupted by another source (e.g., telephone
call, etc), the current channel is saved using the memory playback
function. At the end of the interruption, use this function to listen to the
part of the broadcast that was missed. Channels can be stored
continuously for up to 48 minutes.
1
Touch [PAGE1/3] twice.
The function guide appears.
2
Touch [ / ] while receiving the broadcasting
program you want to store.
The “PAUSED” indicator lights up.
3
Touch [
/
] again during PAUSE.
The “MEMORY MODE” indicator lights up and offset
playback commences.
• The time difference between the real broadcasting time and the offset
playback time is displayed.
4
If [ ] is touched, offset playback stops and the
display returns to the main screen.
• To fast reverse, touch and hold [
] and to fast forward, touch
and hold [
].
• Touching [
] or [
] will move a track up/down.
SIRIUS Setup
SIRIUS Setup Operation
The operation can be performed when the optional SIRIUS receiver box
is connected.
The following steps 1 to 3 are common operations to each
“Setting item” of SIRIUS Setup. Refer to each section for
details.
1
Touch [A.LIST] on the SIRIUS main screen.
The SIRIUS SETUP screen is displayed.
2
Select the desired setting item.
Setting items:
ALERT LIST / SONG ALERT / GAME ALERT / MAY GAME ZONE
3
Touch [RETURN] to return to the previous display.
Setting the announcement individually
for a Song / Artist / Sports Team
The following operation determines whether announcement is set or not
for a stored Song, Artist or Sports team’s information is broadcast by
another radio station.
Setting items: ALERT LIST
1
Touch [
] of the ALERT LIST.
The display changes to the ALERT LIST screen.
2
3
Touch [ ] of the desired song(s), artist(s), or team.
Touch [ ] or [ ] of the channel you want to receive
ALERT announcement, to set to ON.
Set to OFF if you do not want an announcement.
Select the announcement type for GAME ALERT.
Setting ON/OFF of all Songs/Artists
Interruption
Determines whether the received announcement of all stored Songs/
Artists is set or not.
Setting items: SONG ALERT
ON: Set to receive announcements.
OFF: No announcements.
57-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 58 Monday, January 15, 2007 4:02 AM
Setting the sports team announcement
type
iPod® (Optional)
Setting items: GAME ALERT
An iPod® can be connected to the IVA-D105 by using the proprietary
ALPINE FULL SPEED™ connection cable (KCE-422i). When the
IVA-D105 is connected by using the cable, the controls on the iPod are
not functional.
1
About iPod usable with this unit
The following operation sets the announcement type for a stored sports
team.
Touch [ ] or [ ] of GAME ALERT and set to ON.
The received announcement for all stored sports teams is set.
If OFF is selected, no announcements will be made.
2
Touch [
] of GAME ALERT.
The display changes to the GAME ALERT SETUP screen.
3
Touch [
] of the favorite league.
The unit can be used with fourth generation and above iPod, iPod photo,
iPod minis or iPod nano. iPod Shuffle cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
The display changes to the team list of the selected league.
4
Fourth generation iPod: Ver. 3.1.1
Fifth generation iPod: Ver. 1.1.2
iPod photo: Ver. 1.2.1
iPod mini: Ver. 1.4.1
iPod nano: Ver. 1.2
Touch [ ] of the favorite team.
[ ] changes to orange (highlight), and the selection key is
displayed.
5
• The unit cannot be used with the software versions earlier
than “2006-06-28”. For details about “iPod Software
Update,” refer to the iPod Instruction Manual.
Touch [ ] or [ ] to of the desired announcement
type.
INITIAL: Announces when a game starts.
SCORE: At the beginning of the game, the announcement
interrupts; announces every time the score changes.
• Select “NONE” on the list if you do not want to store in memory.
ALERT interruption does not occur.
Playback
1
Press SOURCE/
.
The SOURCE selection screen is displayed.
Setting the Sports Team Display
Set the game status and result information display of a stored team.
Setting items: MY GAME ZONE
ON: Displays the game’s score, status, etc..
OFF: Displays only the opponent team name.
2
Touch [iPod].
The display shows the iPod mode screen.
3
Touch [
] or [
] to select the desired song.
Return to the beginning of the current song:
Touch [
].
Fast reverse:
Touch and hold [
].
Advance to the beginning of the next song:
Touch [
].
Fast forward:
Touch and hold [
4
].
To pause playback, touch [
Touching [
/
/
].
] again will resume playback.
• If a song is playing on the iPod when it is connected to the IVA-D105,
it will continue playing after the connection.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
IVA-D105. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 128 (128
byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the IVA-D105.
58-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 59 Monday, January 15, 2007 4:02 AM
Searching for a desired Song
Direct Search Function
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the IVA-D105 can use these to ease song
searches.
The unit's direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
GENRE/COMPOSER/PODCAST mode, you can quickly target any
song.
Using the search mode’s individual hierarchy, you can narrow down
your search as shown in the table below.
Hierarchy 1
Hierarchy 2
Hierarchy 3
Playlist
Song
—
—
Artist*
Album*
Song
—
Album*
Song
—
—
Song
—
—
—
Example of ALBUM search screen
Hierarchy 4
Genre*
Artist*
Album*
Song
Composer*
Album*
Song
—
Podcast
Episode
—
—
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
Direct search bar
Active point: The present selection position is displayed.
Returns to the previous screen.
Touching [ ] or [ ] will move the active point by 1/6
each. Touching and holding [ ] or [ ] will move the
active point continuously.
Searching by artist name
1
Touch [
].
The search mode is activated, and the search list screen
appears.
2
Touch [
1
] of ARTIST.
The ARTIST search screen is displayed.
3
Select the desired artist.
In search mode, touch anywhere on the Direct
search bar to step through items, or slide left or right
to continuously scroll through items. The search list
display also changes according to the selected song
position.
<SONG search example>
If there are 100 songs in your iPod, all the songs are shown on
the direct search bar.
Suppose the song you are searching for is located at around the
50th song of your library: touch around the middle (50%) of the
direct search bar to jump to the song you desire.
To play back the artist directly
1 Touch [ ] next to the artist’s name.
All songs of the selected artist are played back.
To search for the album of an artist
1 Touch [
] of the selected artist.
The ALBUM search screen of the selected artist is
displayed.
2 Touch [ ] next to the desired album’s name.
All songs of the selected album are played back.
To search for a song in the album of an artist
1 Touch [
] of the desired album in “To search for the
album of an artist” in step 2.
The SONG search screen of the selected album is
displayed.
2 Touch [ ] next to the desired song’s name.
The selected song is played back.
• Touching [ ] of ALL will play back all songs in the list when you are
in a hierarchy with an asterisk* (see table above).
(“ALL” is displayed if the display is less than 4 items.)
• Touching [
] of ALL will display the search list in the next
hierarchy.
(“ALL” is displayed if the display is less than 4 items.)
• In search mode, you can jump to an assigned position by touching the
direct search bar for quick search. For details, refer to “Direct
Search Function” (page 59).
Selecting Playlist/Artist/Album/Genre/
Composer/Podcast
Playlist/Artist/Album/Genre/Composer/Podcast can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
1
Touch [ ] or [ ] to select the desired Playlist/
Artist/Album/Genre/Composer/Podcast.
• If search selection mode is not activated, a SONG search is not
possible.
• During shuffle (M.I.X.) playback, this operation is not possible.
• If Playlist/Artist/Album/Genre/Composer are not searched, this
operation is not possible.
59-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 60 Monday, January 15, 2007 4:02 AM
Random Play Shuffle (M.I.X.)
Remote Control
The Shuffle function of the iPod is displayed as M.I.X. on the IVAD105.
Controls on Remote Control
Shuffle ALL:
Shuffle ALL plays all songs in the iPod randomly. Any one song
does not play back again until all songs have been played back.
Shuffle Albums:
Album shuffle playback plays back all songs in order, then
randomly selects the next album. All songs of that album are
played back in order, and so on. Any one album is played just
once.
Shuffle Songs:
Song shuffle randomly plays back certain selected songs. Any
one song plays back just once until all songs have been played
back.
1
Touch [ALL
].
The songs will be played back in random sequence.
M.I.X. SONGS
(Shuffle ALL)
Touch [
(off)
] after touching [PAGE1/2].
M.I.X. ALBUMS
(Shuffle Albums)
2
M.I.X. SONGS
(Shuffle Songs)
To cancel M.I.X. play, touch [ALL
(off)
] or [
].
• For details of the search mode, refer to “Searching for a desired
Song” (page 59).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X.), the songs will not play back randomly even when
Shuffle album is selected.
PWR button
Turns the power ON and OFF.
Repeat Play
SRC Button
Selects the audio source.
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Touch [PAGE1/2].
The function guide is displayed.
2
Touch [
].
The file will be played repeatedly.
RPT
(Repeat One)
3
(off)
(Repeat the list being played back)
To cancel repeat play, touch [
].
• During repeat playback, no other songs are selectable by touching
[
] or [
].
DN Button
Radio mode: Selects, in descending order, stations
programmed into the radio’s presets.
MP3/WMA/AAC mode:
Folder Select (DN) Button selects the folder.
Changer mode:
DISC Select (DN) Button selects a disc in
descending order.
VOLUME
/
Button
Increase or decreases the volume level.
RETURN Button
DVD/Video CD (PBC ON) mode: Returns to the previous
display. (Does not return in some discs.)
60-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 61 Monday, January 15, 2007 4:02 AM
button
Radio mode: SEEK (DN) button
CD /Changer mode:
Press the button to go back to the beginning
of the current track. Press and hold to fast
reverse.
MP3/WMA/AAC mode:
Press the button to go back to the beginning
of the current file. Press and hold to fast
reverse.
DVD Video/DVD-VR/DVD Audio (VCAP)/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for
more than 1 second to reverse the disc
at double speed. Hold for more than 5
seconds to reverse the disc at 8 times
the normal speed. Hold for more than 10
seconds to reverse the disc at 21 times
the normal speed.
DVD mode:
• When pressed and held in while in the
pause mode, the disc is played in
reverse slow motion at 1/8th the normal
speed. When held in for 5 more
seconds, the reverse slow motion speed
switches to 1/2 the normal speed.
• The picture is reversed by one frame
each time the button is pressed in the
pause mode.
/
Button
Radio mode: Chooses the tuning mode.
By pressing it more than 2 seconds,
Automatic Memory will be operated.
Disc mode: Switches between play and pause.
• SEARCH Button: Not used.
button
Performs stop.
DVD/Video CD:
Pressing once stops the PRE stop; Pressing
twice sets stop.
MENU Button
DVD Video mode:
Shows the menu display.
Video CD:
Turns PBC ON/OFF.
CLR Button
Removes numbers (one character at a time) that have been
selected and input.
Press and hold for 2 seconds. All the characters which were
selected and input are erased.
DISP/TOP M. Button
SETUP Button
Not used.
AUDIO Button
DVD/Video CD mode: Switches audio.
BAND Button
Radio mode: Changes the band.
Changer mode:
Switches the disc mode.
(when an optional KCA-410C is connected)
DVD mode:
While playing a DVD, the display mode is
switched (only when car is stopped).
A.PROC Button
When an external audio processor is connected:
Press the button to display the audio
processor setting screen.
When an external audio processor is non-connected:
Press the button to display the BassEngine
mode screen.
MUTE Button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
By pressing the button for more than 2 seconds, the monitor
opens or closes.
UP Button
Radio mode: Selects, in ascending order, stations
programmed into the radio’s presets.
MP3/WMA/AAC mode:
Folder Select (UP) Button to selects the
folder.
Changer mode:
DISC Select (UP) Button selects a disc in
ascending order.
,
,
,
DVD Video/DVD Audio (VCAP) mode:
Selects an item displayed in the screen.
ENT. Button
Enters the selected item.
button
Radio mode: SEEK (UP) button
CD/Changer mode:
Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.
MP3/WMA/AAC mode:
Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.
DVD Video/DVD-VR/Video CD mode:
Shows playback status (only when car is
stopped).
DVD Video/DVD Audio (VCAP) mode:
By pressing more than 2 seconds, shows the
top menu display.
61-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 62 Monday, January 15, 2007 4:02 AM
DVD Video/DVD-VR/DVD Audio (VCAP)/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for more
than 1 second to forward the disc at
double speed. Hold for more than 5
seconds to forward the disc at 8 times the
normal speed. Hold for more than 10
seconds to forward the disc at 21 times
the normal speed.
DVD Video/DVD-VR/Video CD:
• When pressed and held in while in the
pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.
• The picture is forwarded by one frame
each time the button is pressed in the
pause mode.
Battery Replacement
Battery type: CR2025 battery or equivalent.
1
Opening the battery case
Slide out the battery cover while firmly pressing in the
direction of the arrow.
Numeric Keypad
Inputs numbers.
MONITOR Button
Not used.
ANGLE Button
DVD Video/Audio (VCAP) mode:
Switches the angle of the picture.
SUBTITLE button
DVD mode:
2
Replacing the battery
Put the battery in the case with the (+) indication upward as
shown in the illustration.
Switches the subtitle.
• The SETUP operation of the unit cannot be carried out from the
remote control.
• Some operations may not be possible depending on the disc.
When Using the Remote Control
• Point the remote control at the remote sensor within
about 2 meters.
• It may not be possible to operate the remote control if
the remote control sensor is exposed to direct
sunlight.
• The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
• Placing a battery in backwards way may cause a malfunction.
62-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 63 Monday, January 15, 2007 4:02 AM
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Information
About DVDs
Music CDs and DVDs have grooves (tracks) in which the digital
data is recorded. The data is represented as microscopic pits
recorded into the track – these pits are read by a laser beam to
play the disc. On DVDs, the density of the tracks and pits is
twice that of CDs, so DVDs can contain more data in less space.
CDs
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
Minimum pit
length 0.9 µm
1.2 mm
Track pitch 1.6 µm
DVDs
Minimum pit
length 0.9 µm
0.6 mm
0.6 mm
Track pitch 0.74 µm
A 12 cm disc can contain one movie or about four hours of
music.
In addition, DVDs provide sharp picture quality with vivid colors thanks
to a horizontal resolution of over 500 lines (compared to less than 300
for VHS tape).
In addition, DVDs offer a variety of functions.
Multiple audio* (page 25)
Movies can be recorded in up to eight languages. The desired
language can be selected from the unit.
Subtitles function* (page 25)
Movies can include subtitles in up to 32 languages. The desired
subtitle language can be selected from the unit.
Multi angle function* (page 25)
When the DVD contains a movie shot from multiple angles, the
desired angle can be selected from the unit.
Multi story function*
With this function, a single movie includes various story lines.
You can select different story lines to view various versions of the
same movie.
Operation differs from disc to disc. Story line selection screens
including instructions appear during the movie. Just follow the
instructions.
* The functions audio languages, subtitle languages, angles, etc., differ
from disc to disc. For details, refer to the disc’s instructions.
63-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 64 Monday, January 15, 2007 4:02 AM
Terminology
Dolby Digital
Dolby Digital is a digital audio compression technology
developed by Dolby Laboratories that allows large quantities of
audio data to be efficiently recorded on discs. It is compatible
with audio signals from mono (1 channel) all the way up to 5.1channel surround sound. The signals for the different channels
are completely independent, and since the sound is high quality
digital there is no loss of sound quality.
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels over
the entire frequency range.
This is done with an advance, high sound quality matrix
surround decoder which draws out the spatial properties of the
original recording without adding any sounds to or changing the
sound of the source.
* The separately sold digital audio processor (PXA-H700, etc.) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
LPCM is a signal recording format used for music CDs.
Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDs are
recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving
higher sound quality than music CDs.
Rating levels (parental lock)
Center
speaker
Front
speakers
This is a function of the DVD for restricting the viewing age as
stipulated by laws in different countries. The way in which
viewing is restricted differs from DVD to DVD. Sometimes the
DVD cannot be played at all, other times certain scenes are
skipped, and other times certain scenes are replaced with other
scenes.
Rear
speakers
Subwoofer
Speaker layout for enjoying
Dolby Digital sound/DTS sound
DTS
This is a home-use digital sound format of the DTS Sound
System. This is a high quality sound system, developed by DTS,
Inc. for use in movie theaters.
DTS has six independent sound tracks. The theater presentation
is fully realized in the home and other settings. DTS is the
abbreviation for Digital Theater System.
* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H700, etc.). The DVD video software
must also have a DTS sound track.
The IVA-D105 has a built-in DTS 2-channel audio decoder.
Analog audio outputs are available.
64-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 65 Monday, January 15, 2007 4:02 AM
List of Language Codes
(For details, see page 30.)
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Abbreviation
IE
IK
IN
IS
IT
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZH
ZU
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
65-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 66 Monday, January 15, 2007 4:02 AM
List of Country Codes
(For details, see page 30.)
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
Abbreviation
Country
DM
Andorra
DO
United Arab Emirates
DZ
Afghanistan
Antigua and Barbuda
EC
EE
Anguilla
EG
Albania
Armenia
EH
ER
Netherlands Antilles
ES
Angola
Antarctica
ET
FI
Argentina
FJ
American Samoa
Austria
FK
FM
Australia
FO
Aruba
Azerbaijan
FR
GA
Bosnia and Herzegovina
GB
Barbados
Bangladesh
GD
GE
Belgium
GF
Burkina Faso
Bulgaria
GH
GI
Bahrain
GL
Burundi
Benin
GM
GN
Bermuda
GP
Brunei Darussalam
Bolivia
GQ
GR
Brazil
GS
Bahamas
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic
Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote d’lvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Country
Abbreviation
KI
Dominica
KM
Dominican Republic
KN
Algeria
KP
Ecuador
Estonia
KR
Egypt
KW
Western Sahara
KY
Eritrea
KZ
Spain
LA
Ethiopia
Finland
LB
Fiji
LC
Falkland Islands
LI
Micronesia, Federated States of
LK
Faroe Islands
LR
France
LS
Gabon
LT
United Kingdom
LU
Grenada
LV
Georgia
LY
French Guiana
MA
Ghana
MC
Gibraltar
MD
Greenland
MG
Gambia
MH
Guinea
MK
Guadeloupe
Equatorial Guinea
ML
Greece
MM
South Georgia and the
South Sandwich Islands
MN
MO
Guatemala
MP
Guam
MQ
Guinea-Bissau
MR
Guyana
MS
Hong Kong
MT
Heard Island and
MU
McDonald Islands
MV
Honduras
MW
Croatia
MX
Haiti
MY
Hungary
MZ
Indonesia
NA
Ireland
NC
Israel
NE
India
NF
British Indian Ocean Territory
NG
Iraq
NI
Iran, Islamic Republic of
NL
Iceland
NO
Italy
NP
Jamaica
NR
Jordan
NU
Japan
NZ
Kenya
OM
Kyrgyzstan
PA
Cambodia
Code
7573
7577
7578
7580
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao People’s
Democratic Republic
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
66-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 67 Monday, January 15, 2007 4:02 AM
Abbreviation
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Code
8069
8070
8071
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Country
Abbreviation
Peru
SJ
French Polynesia
SK
Papua New Guinea
SL
Philippines
SM
Pakistan
SN
Poland
SO
Saint Pierre and Miquelon
SR
Pitcairn
ST
Puerto Rico
SV
Portugal
SY
Palau
SZ
Paraguay
TC
Qatar
TD
Reunion
TF
Romania
TG
Russian Federation
TH
Rwanda
TJ
Saudi Arabia
TK
Solomon Islands
TM
Seychelles
TN
Sudan
TO
Sweden
TP
Singapore
TR
Saint Helena
TT
Slovenia
TV
Code
8374
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
8471
8472
8474
8475
8477
8478
8479
8480
8482
8484
8486
Country
Abbreviation
Svalbard and Jan Mayen
TW
Slovakia
TZ
Sierra Leone
UA
San Marino
UG
Senegal
UM
Somalia
US
Suriname
UY
Sao Tome and Principe
UZ
El Salvador
VA
Syrian Arab Republic
VC
Swaziland
Turks and Caicos Islands
VE
Chad
VG
French Southern Territories
VI
Togo
VN
Thailand
VU
Tajikistan
WF
Tokelau
WS
Turkmenistan
YE
Tunisia
YT
Tonga
YU
East Timor
ZA
Turkey
ZM
Trinidad and Tobago
ZW
Tuvalu
Code
8487
8490
8565
8571
8577
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
67-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 68 Monday, January 15, 2007 4:02 AM
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items
in the following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the rest of your
system is properly connected, or then consult your authorized
Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected according to the instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with the
proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise, etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
• Blackout mode is activated.
- Cancel Blackout mode.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness control is set at the minimum position.
- Adjust the Brightness control.
• Temperature in the vehicle is too low.
- Increase the vehicle’s interior temperature to operation
temperature range.
• Connections to the DVD, CD player, navigation system are not
securely made.
- Check the connections and firmly connect.
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle’s interior temperature to cool.
Unclear or noisy display.
• Fluorescent plate is worn out.
- Replace the fluorescent plate.
Navigation system inoperative.
• Connections to the navigation system are incorrect.
- Check the connections with the navigation system and connect
the cables correctly and firmly.
Unclear picture display.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube*.
* The fluorescent tube replacement is not free of charge even within the
warranty period, for the tube is an article of consumption.
Radio
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
CD/MP3/WMA/AAC/DVD/Video CD
Disc playback sound is wavering.
• Moisture condensation in the disc Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Make sure the disc is being inserted following the instructions
in the CD/MP3/WMA/AAC, DVD/Video CD Player Operation
section.
Unable to fast forward or reverse the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your unit
can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc. Consult
your nearest ALPINE dealer.
Disc playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
68-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 69 Monday, January 15, 2007 4:02 AM
Error displays
• Mechanical error
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest ALPINE dealer.
MP3/WMA/AAC is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA/AAC” (pages 17 and 18), then
rewrite in the format supported by this device.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
No picture is produced.
• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor’s parking brake lead is not connected.
- Connect the monitor’s parking brake wire and set the parking
brake.
(For details, refer to the monitor’s instructions.)
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to play back with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be slightly disturbed, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
• Monitor’s fluorescent tube is worn.
- Replace the monitor’s fluorescent tube.
Image stops sometimes.
• Disc is scratched.
- Replaced with a non-scratched disc.
Playing back a DRM protected DivX ® File
Some operations cannot be performed while displaying the following
message.
“Authorization Error”
• If a non-approved DRM protected DivX® file that does not
comply with the registration code of the unit is played back,
“Authorization Error” is displayed for 2 seconds, meaning the
file cannot be played back. After the message has been
displayed, the beginning of the next file will automatically be
played back.
“Rental Expired”
• There is a rental file in the DivX® that is set to audio/visual
times. If audio/visual time is counted as 0, “Rental Expired” is
displayed for 2 seconds, indicating that the file cannot be played
back. After the message has been displayed, the beginning of the
next file will automatically be played back.
“Rental countdown OK?”
• While playing back a rental file, if B.SKIP or ENTER in the file
selection menu is selected, “Rental countdown OK?” is
displayed, and the rental file playback is interrupted (audio/
visual times are reduced by 1). The file has stopped (STOP) at
the time. To interrupt the playback, touch [YES], or touch [NO]
to not be interrupted.
“View DivX® VOD Rental
This rental has (remaining times) views left.
Do you want to use one of your (remaining times) views
now ?”
• If audio/visual times still remain, the remaining number of
playback times is displayed. To play back, touch [YES]. If the
next file is to be played back, touch [NO].
Indication for CD/MP3/WMA/AAC
• Protective circuit is activated due to high temperature.
• Operations of an internal disc, DVD setup, etc., cannot be
performed.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• Mechanism error.
1) Press
and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
69-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 70 Monday, January 15, 2007 4:02 AM
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• The DVD setup operation was attempted when a disc is inserted
in the unit.
- Eject the disc before the DVD setup operation.
Indication for DVD/Video CD
Indication for CD changer
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• Button operation on the unit or remote control is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Protective circuit is activated to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• Mechanism error.
1) Press
and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• No indicated disc.
- Choose another disc.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
70-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 71 Monday, January 15, 2007 4:02 AM
Indication for SAT Receiver Mode
Indication for iPod Mode
• The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
• The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
“connections”).
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the IVA-D105.
(XM mode)
(SIRIUS mode)
• XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
(XM mode)
• Communication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
unit, using the iPod cable.
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
(SIRIUS mode)
• The channel currently selected has stopped broadcasting.
- Select another channel.
• The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
• There is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
71-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 72 Monday, January 15, 2007 4:02 AM
GENERAL
Specifications
Power Requirement
MONITOR SECTION
Screen Size
6.5"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements 280,800 pcs. (1200 × 234)
Effective Number of Picture Elements
99.99% or more
Illumination System
Cold cathode fluorescent tube
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.7 – 107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
14.4 V DC
(11–16 V allowable)
Operating temperature
+32°F to +113°F
(0°C to + 45°C)
Power Output
18 W RMS × 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Output Voltage
Bass
Treble
Weight
2,000 mV / 10k ohms
- 14 dB / +20 dB at 60 Hz
± 14 dB at 10 kHz
2.6 kg
(5 lbs. 12 oz)
Audio output level
Preout (Front, Rear): 2V/10k ohms (max.)
Preout (Subwoofer, Center):
2V/10k ohms (max.)
AUX OUT:
1.2V/10k ohms
Ai-NET:
850 mV
CHASSIS SIZE (Monitor section)
AM TUNER SECTION
Tuning Range
Usable Sensitivity
530 – 1,710 kHz
22.5 µV/27.0 dBf
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
5 – 20,000 Hz
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
85 dB (at 1 kHz)
NTSC/PAL
500 lines or greater
1Vp-p (75 ohms)
DVD: 60 dB
More than 105 dB
Width
Height
Depth
178 mm (7")
50 mm (2")
165 mm (6-1/2")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%.
This means that there is a possibility that 0.01% of the pixels could
be either always ON or OFF.
PICKUP
Wave length
DVD:
CD:
Laser power
666 nm
785 nm
CLASS II
REMOTE CONTROL
Battery Type
Width
Height
Depth
Weight
CR2025 battery
51 mm (2")
119 mm (4-11/16")
13 mm (1/2")
40 g (1.4 oz) (battery excluded)
CAUTION
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of Monitor player)
72-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 73 Monday, January 15, 2007 4:02 AM
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 5 to 7 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
MAKE THE CORRECT CONNECTIONS
Failure to make the proper connections may result in fire or product
damage.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Failure to do so may result in electric shock or injury due to
electrical shorts.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wires insulation from being cut by
the metal edge of the hole.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your IVA-D105. This will reduce any chance of damage to the
unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage to
the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be aware of
the factory installed components (e.g. on-board computer). Do not tap
into these leads to provide power for this unit. When connecting the
IVA-D105 to the fuse box, make sure the fuse for the intended circuit of
the IVA-D105 has the appropriate amperage. Failure to do so may result
in damage to the unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
• The IVA-D105 uses female RCA-type jacks for connection to other
units (e.g. amplifier) having RCA connectors. You may need an adaptor
to connect other units. If so, please contact your authorized ALPINE
dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–) terminal.
Never connect left and right channel speaker cables to each other or to
the vehicle body.
• The Display must be completely retracted in the casing when installing.
If it is not, problems may occur.
• When installing in automobiles, make sure the Display can open/close
without coming in contact with the gear shift.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
73-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 74 Monday, January 15, 2007 4:02 AM
2
Installation
Screw
Hex Nut (M5)
Bolt Stud
Caution
Do not block the unit’s fan or heat sink, thus preventing
air circulation. If blocked, heat will accumulate inside
the unit and may cause a fire.
IVA-D105
Meatal Mounting
Strap
Air ventilation hole
Ground
Lead
Chassis
Front Frame
(Included)
Wider edge should face down.
Rear of the Unit
Reinforce the monitor unit with a metal mounting strap (not
supplied). Secure the ground lead of the unit to a clean
metal spot using a screw ( ) already attached to the
vehicle’s chassis.
Installing the Monitor
Installation Location
• For the screw marked
, use an appropriate screw for the
chosen mounting location.
Before deciding on the mounting location, check that opening and
closing the display will not hamper gear shifting in that position.
Connect each input lead coming from an amplifier or
equalizer to the corresponding output lead coming from the
left rear of the IVA-D105. Connect all other leads of the IVAD105 according to details described in the Connections
section.
• Install at an angle of within 30 degrees from the horizontal.
• The monitor’s angle is set to 90 degrees at the factory. Depending on
the car, the monitor may hit the dashboard when opened. The
monitor’s angle can be adjusted and stored in memory so that the
monitor will not hit the dashboard when opening. For adjusting the
monitor, refer to “Adjusting the Monitor Angle” on page 39.
Even when the vehicle’s battery power is removed, the adjusted
monitor angle remains stored in memory.
1
3
Dashboard
Mounting Sleeve
(Included)
Lock Pin
Mounting Bracket
(Included)
IVA-D105
Slide the IVA-D105 into the dashboard. When the unit is in
place, make sure the locking pins are fully seated in the
down position. This can be done by pressing firmly in on the
unit while pushing the locking pin down with a small
screwdriver. This ensures that the unit is properly locked
and will not accidentally come out from the dashboard.
Install the supplied Front Frame.
Removal
Pressure Plates*
Flush head Screws (M4 × 3) (Included)
1. Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see Step 3). As each
pin is unlocked, gently pull out on the unit to make sure
it does not re-lock before unlocking the second pin.
2. Pull the unit out, keeping it unlocked as you do so.
Slide the mounting sleeve into the dashboard. Install the
supplied bracket on the monitor.
• Make sure to use the supplied Flush head screw (M4 × 3) to
install the monitor.
If you use another screw to install the monitor, it may cause a
malfunction.
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
74-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 75 Monday, January 15, 2007 4:02 AM
< JAPANESE CAR >
To install using the vehicle’s standard bracket.
Flush Head Screws (M4 × 3)
(Included)
Ground Lead
IVA-D105
Mounting Bracket
• Make sure to use the supplied flush head screw (M4 × 3) to install
the monitor.
If you use another screw to install the monitor, it may cause a
malfunction. However, only if you cannot install with the flush head
screws (M4 × 3), use the supplied screw (M4 × 6).
Foot Brake Lead / Parking Brake Lead Connection
Foot brake lamp
FOOT BRAKE
(Yellow/Black)
IVA-D105
Pinch
Connector
(sold separately)
Foot brake lead
Foot brake switch
Chassis
PARKING BRAKE
Parking brake lamp
(Yellow/Blue)
Pinch
Connector
(sold separately)
Parking brake lead
Battery
Parking brake switch
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
IGNITION
(Red)
SPST SW (Optional)
FUSE (5A)
(Optional)
BATTERY
(Yellow)
FUSE (20A)
(Optional)
IVA-D105
Battery
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
• The diagram and the fuse amperage shown above are in the case when IVA-D105 is used individually.
• If the switched power (ignition) lead of the IVA-D105 is connected directly to the positive (+) post of the vehicle’s battery, the IVA-D105 draws
some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged.
To prevent external noise from entering the audio system.
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
•
•
•
•
75-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 76 Monday, January 15, 2007 4:02 AM
Connections
Antenna
To steering remote
control interface box
To back-up camera
REMOTE OUT (White/Brown)
To remote input lead
REMOTE IN (White/Brown)
(White)
To remote output lead
To plus side of the
back lamp signal lead
of the car
To monitor control
lead
To Video Input
Terminal
(Red)
To Audio input
terminals (R, L)
REVERSE (Orange/White)
M.CONT (White/Pink)
(Yellow)
(Yellow)
To Video output
terminal
(White)
To Audio output
terminals (R, L)
(Red)
Rear Left
Amplifier
Rear Right
*
Front Left
Amplifier
Front Right
NORM
EQ/DIV
Amplifier
Subwoofer
Amplifier
Center
Speaker
CD Changer (Sold
Separately)
To iPod
REMOTE TURN-ON (Blue/White)
To amplifier or
equalizer
POWER ANT (Blue)
To power antenna
AUDIO INTERRUPT IN (Pink/Black)
To vehicle phone
PARKING BRAKE (Yellow/Blue)
FOOT BRAKE (Yellow/Black)
IGNITION (Red)
To the parking brake
signal lead
To the foot brake cord
or brake lamp cord
Ignition key
SPEAKER
LEFT
FRONT
(White)
(White/
Black)
SPEAKER
LEFT
REAR
(Green/
Black)
(Green)
SPEAKER
RIGHT
REAR
(Violet)
(Violet/
Black)
SPEAKER
RIGHT
FRONT
(Gray/
Black)
BATTERY (Yellow)
(Gray)
GND (Black)
Battery
Speakers
Front left
Rear left
Rear right
Front right
• Set the system switch to “NORM” when only a changer is connected (when the Ai-NET compatible equalizer is not used).
* The system switch is located on the right of the unit (if the front panel is viewed from the front).
76-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 77 Monday, January 15, 2007 4:02 AM
Antenna Receptacle
Steering Remote Control Interface Connector
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
CAMERA Input Terminal
FULL SPEED™ Connection Cable (KCE-422i) (sold
separately)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Power Antenna Lead (Blue)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle’s
power antenna. Do not use this lead to turn on an amplifier or a
signal processor, etc.
Remote Control Input Lead (White/Brown)
Audio Interrupt In Lead (Pink/Black)
Connect the external Alpine product to the remote control
output lead.
Parking Brake Lead (Yellow/Blue)
Use when connecting a back-up camera.
Remote Control Output Lead (White/Brown)
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-D105.
Foot Brake Lead (Yellow/Black)
Connect to the vehicle’s foot brake lead or brake lamp lead.
Switched Power Lead (Ignition) (Red)
Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor.
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Video Output Connector (AUX OUTPUT) (Yellow)
Battery Lead (Yellow)
Monitor Control Lead (White/Pink)
Output the video.
Audio Output Connectors (AUX OUTPUT)
Connect this lead to the positive (+) post of the vehicle’s
battery.
RED is right and WHITE is left output the audio.
Fuse Holder (10A)
Video Input Connector (AUX INPUT) (Yellow)
Ground Lead (Black)
Input the video.
RED is right and WHITE is left input the audio.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Rear Output RCA Connectors
Right Front (+) Speaker Output Lead (Gray)
RED is right and WHITE is left.
Right Front (–) Speaker Output Lead (Gray/Black)
Front Output RCA Connectors
Right Rear (–) Speaker Output Lead (Violet/Black)
Audio Input Connectors (AUX INPUT)
RED is right and WHITE is left.
Subwoofer Output RCA Connector
Center RCA Connector
RCA Extension Cable (sold separately)
Digital Output Terminal (Optical)
Right Rear (+) Speaker Output Lead (Violet)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Use when combining fiber optic digital input compatible
products.
Left Front (+) Speaker Output Lead (White)
Ai-NET Connector
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Connect this to the output or input connector of another
device (CD Changer, Equalizer, HD Radio™ TUNER
MODULE, etc.) equipped with Ai-NET.
• You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) to this component.
System Switch
AV Connector
Power Supply Connector
iPod Direct Connector.
iPod control signals.
Connect this to an iPod or an optional Bluetooth Box, using
the FULL SPEED™ Connection Cable (KCE-422i) (sold
separately).
To use a hands-free mobile phone, an optional Bluetooth
Box connection is required. For details on connection, refer
to the Owner’s Manual of the Bluetooth Box.
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
Ai-NET Cable (Included with CD Changer)
77-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 78 Monday, January 15, 2007 4:02 AM
System Example
Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), Navigation system, DVD player and
changer.
Fiber optic cable
NVE-N852A/NVE-N871A/NVE-N872A
Navigation system
(Sold Separately)
NORM
Fiber optic digital Input
terminal (for head unit)
EQ/DIV
Audio Processor (Ai-NET)
(Fiber optic digital
compatible)
(Sold Separately)
<Monitor unit>
Ai-NET
cable
Fiber optic
digital Input
terminal (for
DVD Player)
(Yellow)
Fiber optic digital
Input terminal
(for Changer)
Ai-NET
cable
*Fiber optic cable
Fiber optic cable
(Yellow)
(White/Brown)
REMOTE OUT
(White/Brown)
REMOTE IN
DVD Video Player
(Ai-NET)
(DVA-5210 etc.)
(Sold Separately)
Ai-NET cable
CD Changer
(Ai-NET)
(Sold Separately)
*Only connect fiber optic digital compatible CD Changer
• When the fiber optic compatible product is connected, it is necessary to set the mode of this unit. Refer to “Setting the Digital Output” (page 38)
and set to ON.
• When the NVA-N751AS is connected for the Navigation System, use the RGB conversion cable KWE-503N (Sold separately).
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
78-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 79 Monday, January 15, 2007 4:02 AM
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
RGB Cable (Included with NVE-N852A/NVE-N872A,
not included with NVE-N871A)
Digital Output Terminal
Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
Fiber optic Cable (Sold Separately)
Video Input Connector (AUX INPUT) (Yellow)
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
RCA Extension Cable (Included with DVD video
player)
Ai-NET Cable (Included with DVD video player)
Ai-NET Cable (Included with CD Changer)
To Ai-NET Connector (Gray)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
To Ai-NET Connector (Black)
Ai-NET Cable (Included with Audio Processor)
79-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
+01GB00IVAD105.book Page 80 Monday, January 15, 2007 4:02 AM
When Connecting External Equipment
To Audio Input terminal
Rear monitor
(Sold Separately)
To Video Input terminal
Back-up camera
(Sold Separately)
To Video Output terminal
NORM
EQ/DIV
To Video Output terminal
TV Tuner or VCR
(Sold Separately)
To Audio Output terminal
(White/Pink)
M.CONT
M.CONT
(White/Pink)
* Connect this to the touch panel-compatible rear monitor.
(White/Brown)
REMOTE OUT
REMOTE IN
(White/Brown)
(White/Brown)
REMOTE IN
REMOTE OUT
(White/Brown)
(Orange/White)
REVERSE
Use only when back-up camera is connected.
System Switch
Remote Control Output Lead (White/Brown)
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
CAMERA Input Terminal
Use when connecting a back-up camera.
Remote Control Input Lead (White/Brown)
Reverse Lead (Orange/White)
Connect to the plus side of the car’s reverse lamp which
lights when the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked to putting the car into reverse (R).
RCA Extension Cable (Sold separately)
Video/Audio Input Connectors (AUX INPUT)
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor.
80-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
02WARRANTY.fm Page 2 Monday, January 15, 2007 4:06 AM
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and
are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer
or contact Alpine at one of the telephone numbers listed below.
PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related
Accessories (“the product”). Products purchased in the Canada
are covered only in the Canada. Products purchased in the
U.S.A. are covered only in the U.S.A.
LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first
consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product,
who must reside in the United States, Puerto Rico or Canada.
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts
and labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
A Damage occurring during shipment of the product to Alpine
for repair (claims must be presented to the carrier).
B Damage caused by accident or abuse, including burned
voice coils caused by over-driving the speaker (amplifier level
is turned up and driven into distortion or clipping). Speaker
mechanical failure (e.g. punctures, tears or rips). Cracked or
damaged LCD panels. Dropped or damaged hard drives.
C Damage caused by negligence, misuse, improper operation
or failure to follow instructions contained in the Owner’s
manual.
D Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of
the product.
E Service performed by an unauthorized person, company or
association.
F Any product which has the serial number defaced, altered or
removed.
G Any product which has been adjusted, altered or modified
without Alpine’s consent.
H Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
I Any product not purchased from an Authorized Alpine
Dealer.
HOW TO OBTAIN WARRANTY SERVICE:
A You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair and for
payment of any initial shipping charges. Alpine will, at its
option, repair or replace the product with a new or
reconditioned product without charge. If the repairs are
covered by the warranty, and if the product was shipped to an
Authorized Alpine Service Center or Alpine, Alpine will pay
the return shipping charges.
B You should provide a detailed description of the problem(s)
for which service is required.
C You must supply proof of your purchase of the product.
D You must package the product securely to avoid damage
during shipment. To prevent lost packages it is
recommended to use a carrier that provides a tracking
service.
HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE
AND MERCHANTABILITY ARE LIMITED IN DURATION TO
THE PERIOD OF THE EXPRESS WARRANTY SET FORTH
ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR
ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE OF THE PRODUCT.
HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY
THE PRODUCT. THE TERM “INCIDENTAL DAMAGES”
REFERS TO EXPENSES OF TRANSPORTING THE
PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF
THE ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF
THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF THE
PRODUCT. THE TERM “CONSEQUENTIAL DAMAGES”
REFERS TO THE COST OF REPAIRING OR REPLACING
OTHER PROPERTY WHICH IS DAMAGED WHEN THIS
PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES
PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND
IN LIEU OF ALL OTHERS.
HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
province. In addition, some states/provinces do not allow
limitations on how long an implied warranty lasts, and some do
not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, limitations as to these
matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product
has been installed in your vehicle by an Authorized Installation
Center, and this warranty stamped upon installation by the
installation center.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO
1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION
1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
WARRANTY -H4 :EN (for US model)