Owner`s manual | Alpine IVA-D310 Car Video System User Manual

01GB00IVAD310.book Page 1 Wednesday, December 1, 2004 4:20 AM
R
EN
Mobile Multimedia Station
IVA-D310
FR
TM
ES
DIGITAL VIDEO
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Dalian Dongtai Colour Printing Technology Co., Ltd.
No. 24 Liaohexisan Road Dalian Economic&Technical
Development Zone, China
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Phone 03-9769-0000
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
Designed by ALPINE Japan
Printed in China (Y)
68-02278Z28-A
01GB01IVAD310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 2 Wednesday, December 1, 2004 4:20 AM
CHA-S634
CHA-1214
• CD changer for IVA-D310.
• Changeur CD pour IVA-D310.
• Cambiador de CD para IVA-D310.
• CD changer for IVA-D310.
• Changeur CD pour IVA-D310.
• Cambiador de CD para IVA-D310.
CHM-S630
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT.
The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW
PLAY BACK.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK, MP3
PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12 disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques
super compact doté de la fonction CD-R/RW PLAY BACK.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK y CD
TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630 M-Bus es un cambiador de seis discos de tamaño
reducido con un CD-R/RW PLAY BACK.
01GB02IVAD310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 1 Wednesday, December 1, 2004 4:20 AM
ENGLISH
Contents
DVD/Video CD
PRECAUTIONS ........................................ 5
Playing DVD/Video CD ..................................18
To display the DVD mode screen ................19
If a menu screen appears .............................19
Displaying the Top Menu Screen
(DVD only) ..............................................20
Displaying the Menu Screen (DVD only) ...20
Displaying the Menu Operation Mode Screen
(DVD only) ..............................................20
Turning the PBC Function ON or OFF
(Video CD only) ..........................................20
Discs Playable on This Unit ................... 7
Stopping Playback (PRE STOP) .....................20
Operating Instructions
WARNING
WARNING ................................................. 5
CAUTION .................................................. 5
Getting Started
Location of Controls ...................................... 10
Detaching and Attaching the Front Panel ...... 10
Initial System Start-Up ................................... 11
Turning Power On or Off ............................... 11
Opening/Closing the Monitor ........................ 11
Adjusting the Monitor Viewing Angle ........... 11
Moving the Monitor to be Flat ....................... 12
Adjusting the Volume ..................................... 12
Lowering Volume Quickly ............................. 12
How to view the Display ................................ 12
Touch button operation ............................... 12
Recalling the Source ................................... 12
Shortcut Screen ........................................... 13
Displaying the Numeric Keypad
Input Screen ............................................. 13
Dual-Screen Display ................................... 14
Radio
Listening to the Radio .................................... 14
Stopping Playback ..........................................20
Fast-forwarding/Fast-reversing .......................20
Finding the Beginnings of Chapters or
Tracks ..........................................................21
Playing Still Frames (Pausing) ........................21
Forward/reverse frame-by-frame Playback .....21
Slow Motion Playback ....................................21
Chapter/Track/Title Repeat Playback .............21
Searching by Title Number (DVD only) .........21
Searching Directly by Chapter or
Track Number ..............................................22
Switching the Angle (DVD only) ...................22
Switching the Audio Tracks ............................22
Switching the Subtitles (Subtitle Language)
(DVD only) ..................................................22
Switching from the disc menu .....................23
Displaying the Disc Status for
DVD/Video CD ...........................................23
Other Useful Features
Manual Storing of Station Presets .................. 15
Adjusting the Audio ........................................23
Automatic Memory of Station Presets ........... 15
Search Function ..............................................24
Tuning to Preset Stations ................................ 15
Rear Entertainment Function ..........................25
Switching the function of
the remote sensor .....................................25
Switching Display Modes ...............................25
CD/MP3/WMA
Playback ......................................................... 16
Repeat Play ..................................................... 16
Selecting Folders
(concerning MP3/WMA) ............................ 16
Switching the Visual Source Only
(Simultaneous Function) .............................26
Cancelling the Simultaneous Function ........26
Blackout Mode On and Off .............................26
About MP3/WMA .......................................... 17
Setting VISUALIZER .....................................26
M.I.X. (Random Play) .................................... 16
Setting the Visual Effect .................................26
1-EN
01GB03IVAD310TOC.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 2 Wednesday, December 1, 2004 4:20 AM
Monitor Setting
Monitor Setting Operation .............................. 27
Selecting the Monitor Position .................... 27
Setting Automatic Opening/Closing of the
Monitor .................................................... 27
Setup
DVD Setup
DVD Setup Operation ..................................... 27
Setting of the Menu Language .................... 28
Setting of the Audio Language ................... 28
Setting of the Subtitle Language ................. 28
Changing the Country Code Setting ........... 28
Setting the Rating Level (Parental Lock) .... 29
Changing the Digital Output Setting ........... 29
Setting the Downmix Mode ........................ 31
Setting the TV Screen Setting ..................... 31
GENERAL Setup
General Setup Operation ................................ 31
Displaying the Time .................................... 32
Setting the Time .......................................... 32
Setting Daylight Saving Time ..................... 32
Demonstration Function .............................. 32
Sound (Beep) Guide Function ..................... 32
Setting the Scroll ......................................... 32
Setting the Sound Quality of the Tuner ....... 32
Setting the Auxiliary Data Field Display .... 32
Playing MP3/WMA Data ............................ 32
Adjusting the Dimmer of
Button Lighting at Night .......................... 32
SYSTEM Setup
System Setup Operation ................................. 33
Setting the External Device
Interrupt Mode ......................................... 33
Setting the Interrupt Icon Display ............... 33
Setting the Navigation Mode ....................... 33
Setting the Navigation Interruption ............. 33
Setting the VISUALIZER Mode Display ... 34
Setting the AUX Mode ................................ 34
Naming External Devices ............................ 34
Adjusting the External Input Audio
Level ........................................................ 34
Setting of the External Monitor Output ...... 34
Setting of the Rear Camera ......................... 34
Setting the VISUAL Touch Button ............. 34
Optical Digital Input Selection for an External
Audio Processor ....................................... 35
Setting the Digital Output ........................... 35
DISPLAY Setup
Display Setup Operation ................................ 35
Setting the Brightness of the
Backlighting ............................................ 35
Adjusting the Minimum Level of
Backlight .................................................. 36
Switching Background Textures ................. 36
Setting Automatic Background Textures .... 36
Setting the Font Type .................................. 36
Switching the Font Back Display Color ..... 36
Turning the Touch Panel Vibration
ON or OFF ............................................... 36
Adjusting the Touch Panel .......................... 36
i-Personalize™
Media Xpander Function
Setting the MX mode ..................................... 37
Bass Engine Function
Setting the Bass Engine .................................. 37
Selecting Bass Max EQ mode
(Maker’s setting) ...................................... 38
Adjusting and Storing/Recalling the
Parametric EQ ......................................... 38
About the Time Correction ......................... 39
Adjustment and Storing/Recalling of Time
Correction ................................................ 39
Adjusting and Storing/Recalling the Bass
Focus ........................................................ 40
Adjustment and Storing/Recalling of the
Built-in Crossover .................................... 41
Subwoofer On and Off ................................... 42
VISUAL EQ™
Visual EQ Setting Operation .......................... 42
Selecting the VISUAL EQ Mode
(Maker’s setting) ...................................... 42
Adjusting Brightness ................................... 42
Adjusting Color of Picture .......................... 42
Adjusting Tint of Picture ............................. 42
Adjusting Image Contrast ........................... 42
Adjusting Picture Quality ........................... 43
Storing VISUAL EQ ................................... 43
2-EN
01GB03IVAD310TOC.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 3 Wednesday, December 1, 2004 4:20 AM
ENGLISH
Data Download
About SOUND SETUP/BACKGROUND
Download .................................................... 43
Data Downloading .......................................... 43
Downloading the
MY BACKGROUND data .......................... 44
Setting AMP Link (Optional)
Recalling the Display of the External Amplifier
Setting and Status (Option) ......................... 44
AMP Link Lock Function .............................. 44
External Audio Processor (Optional)
Changer (Optional)
Controlling CD Changer (Optional) ...............54
Multi-Changer Selection (Optional) ...............55
HDD Player Operation (Optional)
Listening to Music of HDD ............................55
SAT Radio Receiver (Optional)
Receiving Channels with the SAT Receiver
(Optional) ....................................................56
Tuning in to Categorized Programs ................56
Changing the Display ......................................56
Checking the SAT Radio ID Number .............56
Adjustment Procedure for Dolby Surround ... 45
Storing Channel Presets ..................................57
Setting the Speakers ....................................... 46
Receiving Stored Channels .............................57
Set MX Mode of the External
Audio Processor .......................................... 46
Displaying the Category/Channel Name Title
List ...............................................................57
X-OVER Adjustment ..................................... 46
Selecting the Channel directly ........................57
Performing Time Correction Manually
(TCR) .......................................................... 47
Phase Switching ............................................. 48
Graphic Equalizer Adjustments ..................... 48
Parametric Equalizer Adjustments ................. 49
Setting Bass Sound Control ........................... 50
Setting Bass Compressor ............................ 50
Setting Bass Focus ...................................... 50
Speaker Setup ................................................. 50
Setting of Dolby 5.1ch ................................... 51
Adjusting the acoustic image ...................... 51
Mixing bass sound to the rear channel ........ 51
Achieving powerful high volume sound ..... 51
Adjusting the speaker levels ....................... 51
Adjusting the DVD Level ............................... 51
Storing Settings in the Memory ..................... 52
Getting out the Preset Memory ...................... 52
Using the Pro Logic II Mode ......................... 52
Linear PCM Setting ........................................ 53
iPod™ (Optional)
Playback ..........................................................58
Searching for a desired Song ..........................58
Searching by Playlist ...................................58
Searching by artist name .............................58
Searching by album name ............................58
Random Play Shuffle (M.I.X.) .....................59
Repeat Play .....................................................59
About Subdisplay Indications
About Subdisplay Indications .........................59
Remote Control
Controls on Remote Control ...........................60
When Using the Remote Control ....................61
Battery Replacement .......................................62
Information
About DVDs ...................................................62
Terminology ....................................................63
Navigation System (Optional)
Switching the Navigation Screen
(Optional) .................................................... 53
Auxiliary Device (Optional)
List of Language Codes ..................................64
List of Country Codes .....................................65
In Case of Difficulty .......................................67
Specifications ..................................................71
Operating Auxiliary Devices (Optional) ........ 54
3-EN
01GB03IVAD310TOC.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 4 Wednesday, December 1, 2004 4:20 AM
Installation and
Connections
WARNING
Warning .................................................. 72
Caution ................................................... 72
Precautions ............................................ 72
Installation ...................................................... 73
Connections (IVA-D310 Wiring Diagram) ..... 76
System Example ............................................. 78
LIMITED WARRANTY
4-EN
01GB03IVAD310TOC.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 5 Wednesday, December 1, 2004 4:20 AM
Operating Instructions
WARNING
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to watch
TV/Video while driving a vehicle. Installing this product
incorrectly enables the driver to watch TV/Video while driving.
This may cause a distraction, preventing the driver from looking
ahead, thus causing an accident. The driver or other people could be
severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+
and -) as instructed. Rupture or chemical leakage from the battery
may cause fire or personal injury.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Doing so may result in an accident, fire or electric shock.
Temperature
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Moisture Condensation
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Damaged Disc
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Failure to do so may result in fire or electric shock.
5-EN
01GB04IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 6 Wednesday, December 1, 2004 4:20 AM
Maintenance
Correct Handling
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc. Your
player will automatically eject any disc that is inserted incorrectly.
If the player continues to eject a correctly inserted disc, push the
RESET switch with a pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
DVD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Irregular Shaped Discs
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
New Discs
As a protective measure to prevent the disc from jamming, the
DVD player will automatically eject discs with irregular surfaces or
inserted incorrectly. When a new disc is inserted into the player and
ejected after initial loading, using your finger, feel around the
inside of the center hole and outside edge of the disc. If you feel
any small bumps or irregularities, this could inhibit proper loading
of the disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ball-point pen or other such
instrument, then insert the disc again.
Center Hole
Bumps
Center Hole
New Disc
Outside
(Bumps)
Installation Location
Make sure the IVA-D310 will not be installed in a location
subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
6-EN
01GB04IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 7 Wednesday, December 1, 2004 4:20 AM
Disc Accessories
Discs Playable on This Unit
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause operational problems. We recommend
not using these accessories on discs played in Alpine DVD players.
Playable Discs
The discs listed below can be played on this unit.
Mark (logo)
Transparent Sheet
Recorded
content
Disc size
Disc Stabilizer
12 cm*
Handling the Detachable Front Panel
• Do not expose to rain or water.
• Do not drop or subject to shock.
• After turning the system off, a slight ghost of the image will
remain temporarily. This is an effect peculiar to LCD technology
and is normal.
• In cold temperature conditions, the screen may lose contrast
temporarily. After a short warm-up period, it will return to
normal.
DVD
Video
One-sided
disc
Approx.
4 hours
Two-sided
disc Approx.
8 hours
Audio
+
Video
(Moving
pictures)
One-sided
disc
Approx.
80 Minutes
8 cm
Two-sided
disc
Approx.
160 Minutes
Alpine products equipped with the Ai-NET bus, connected to the
IVA-D310, can be operated from the IVA-D310. Depending on the
products connected, the functions and displays will vary. For
details, consult your Alpine dealer.
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the IVA-D310. This
has been done for the safety of the driver and passengers.
Audio Processor Adjustments cannot be made if the car is moving.
The car must be parked and the parking brake must be engaged for
the procedure described in the Owner’s Manual to be valid. The
warning “CAN’T OPERATE WHILE DRIVING,” will be
displayed if any attempts are made to perform these operations
while driving.
Max.
playing time
Video
CD
Music
CD
Audio
+
Video
(Moving
pictures)
12 cm
Approx.
74 Minutes
8 cm
Approx.
20 Minutes
12 cm
Approx.
74 Minutes
8 cm
(CD single)
Approx.
20 Minutes
Audio
* Two-layer DVD disc compatible
7-EN
01GB04IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 8 Wednesday, December 1, 2004 4:20 AM
Discs that cannot be played
DVD-ROMs, DVD-RAMs, DVD + Rs, DVD + RWs, CD-ROMs
(excluding MP3/WMA files), photo CDs, etc.
DVD region number (playable region number)
This DVD player will play back any disc whose region number is 1
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
1
ALL
Multisession CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalized), additional data may be added.
Once this additional data has been recorded, this becomes a
“multisession” CD. The IVA-D310 can only read multisession
DATA Formatted discs (MP3/WMA files - Not Audio CD files).
Properly formatted MP3/WMA Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32
characters) or Joliet (Windows or Macintosh long filenames) file
naming conventions*.
*Please consult the Owner’s manual for additional information.
Video CDs
This DVD head unit is compatible with playback control (PBC)
compatible video CDs (version 2.0).
“PBC” is a function by which you can use menu screens recorded
on the disc to find the scene you want to watch and view various
types of information in dialog style.
Using compact discs (CD/CD-R/CD-RW)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable)
which have been recorded only on audio devices. You can also play
CD-Rs/CD-RWs containing MP3/WMA formatted audio files.
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA files written in a format compliant
with this unit. For details, see pages 17 and 18.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
Tips for making your own CDs
The IVA-D310 plays DVD Video, Video CD, Audio CD and has a
built in MP3/WMA decoder.
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA encoded CD-R/RW
files).
What is the difference between an Audio and MP3/WMA CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer
3)/WMA (Windows Media Audio) is a data file that uses a
compression scheme to reduce the size of the music file.*
On handling compact discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
Using DVD-Rs/DVD-RWs
• This unit is compatible only with discs recorded in the DVDVideo mode.
Discs recorded in the DVD-VR mode cannot be played back.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device. (This unit has a copy protection function. Discs copied
illegally will not be played back. Some files recorded by a
software using an improper recording system may be recognized
as illegally copied.)
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/DVDRWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs are more
affected by heat, moisture, and direct sunlight. If left in a car,
etc., damage may occur and it might not play on this unit.
Hybrid Audio CD and Data (MP3/WMA) CD-R/RW discs:
The IVA-D310 can read either sector on the disc. Choose CD-DA
to play the CD audio section or MP3/WMA to play the MP3/WMA
section.*
8-EN
01GB04IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 9 Wednesday, December 1, 2004 4:20 AM
Disc terminology
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
• “DTS” and “DTS2.0 + Digital Out” are trademarks of Digital
Theater Systems, inc.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, the Apple logo and iPod are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.
9-EN
01GB04IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 10 Wednesday, December 1, 2004 4:20 AM
Subdisplay
Getting Started
Refer to “About Subdisplay Indications” (pages 59 and 60).
TILT DN/UP button
Monitor open: The angle of the raised monitor is adjustable
between 40° and 105°. If the button is pressed and held, the
angle continuously changes.
Monitor closed: Pressing the UP/DN button recalls the
radio’s presets. Pressing the UP/DOWN button changes the
track, file or chapter of a disc. Pressing and holding this
button advances or reverses the track, file or chapter of a
disc. (the same operation is possible for an optional
changer, if connected).
button
Ejects a disc.
button
Use this button to remove the front panel.
Remote Sensor
Point the supplied remote control transmitter towards the
remote sensor within a range of 2 meters.
Monitor
About the expression of buttons in this Owner’s
Manual
Compatibility with Factory Steering Wheel Radio
Controls
If your vehicle has steering wheel controls for the radio, an optional
steering wheel control interface may be available to connect to your
Alpine radio. For details, contact your Alpine dealer.
Location of Controls
• The buttons on this unit are expressed in bold (e.g. SOURCE/
POWER). The touch buttons on the display are expressed in bold
with [ ] (e.g. [SOURCE]).
• This Owner’s Manual explains mainly the function of touch
buttons, when a touch button and a unit button have the same
function.
Detaching and Attaching the Front Panel
BAND button
Radio mode: Changes the band.
Visual source (except navigation screen): Changes the
display mode.
MUTE button
Turns the MUTE mode ON or OFF.
Detaching
1
2
FLAT/SUB DISP. button
Press to set the open monitor to the flat position. Press and
hold for at least 2 seconds to change the display to the
subdisplay (Clock
Normal mode for each mode).
3
Turn off the unit power.
Press (Release) at the lower right side until the
front panel pops out.
Grasp the right side of the front panel, lift it up
slightly then pull it out.
OPEN/CLOSE button
Opens and closes the monitor.
Action Indicator
The indicator is constantly lit, other than for the following
indications.
• The indicator blinks when closing the monitor.
• The indicator is turned off when the dimmer (monitor
display brightness) is set to ON, and is also turned off
according to the brightness of the car when the dimmer
is set to AUTO.
• The indicator slowly blinks when the backlighting (BLACK
OUT function) is set to OFF.
• The indicator blinks in the voice guidance mode when an
ALPINE navigation system is connected.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
Attaching
Attach the front panel squarely onto the main unit until it clicks.
Rotary encoder
Adjust the volume by turning to the left or right.
If pressed, the audio adjusting screen is displayed.
SOURCE/POWER button
Turns the power on. Press and hold for at least 2 seconds to
turn the power off.
Recalls the source selection screen.
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
10-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 11 Wednesday, December 1, 2004 4:20 AM
Initial System Start-Up
Opening/Closing the Monitor
Immediately after installing or applying power to the unit, it should be
initialized. To do this, first, remove the detachable front panel. Behind
the front panel, to the left of the connector, there is a small hole. Using a
pencil or other pointed object, press the reset switch mounted behind
this hole to complete the initialization procedure.
1
• Any of the buttons does not function while the monitor is closing by
reset.
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any button on the unit except
OPEN/CLOSE, FLAT, TILT DN/UP (when monitor is opened) and
(Eject).
2
Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.
• The IVA-D310 draws minimal current even when its power switch is
turned off. If the switched power (ignition) lead of the IVA-D310 is
connected directly to the positive (+) post of the vehicle's battery, the
battery may be discharged. If this lead is unswitched, it must be
disconnected from the battery post should the vehicle be left unused
for an extended period of time.
An SPST (Single-Pole, Single-Throw) switch (sold separately) can be
added to simplify this procedure. Then, you can simply place it in the
OFF position when you leave the vehicle. Turn the SPST switch back
ON before using the IVA-D310. For connecting the SPST switch,
refer to the “Connection Diagram of SPST Switch (Sold Separately)”
(page 75).
• Some operation of the unit cannot be performed while the vehicle is
in motion. In this case, be sure to first stop your vehicle and apply the
parking brake, then perform the operation.
Press OPEN/CLOSE.
The unit beeps 3 times and opens the monitor automatically.
2
Press OPEN/CLOSE.
The unit beeps 3 times and closes the monitor
automatically.
• Opening/closing the monitor should never be performed manually. It
may cause a malfunction.
• The monitor’s angle is set to 90 degrees at the factory. Depending on
the car, the monitor may hit the dashboard when opened. The
monitor’s angle can be adjusted and stored in memory so that the
monitor will not hit the dashboard when opening. For adjusting the
monitor, refer to “Adjusting the Monitor Viewing Angle” (page 11).
Even when the vehicle’s battery power is removed, the adjusted
monitor angle remains stored in memory.
• The IVA-D310 is a precision device. With gentle handling, its unique
capabilities can be enjoyed for a long time.
• If the monitor touches anything while it is being opened (or closed),
the monitor will beep and stop opening (or closing) immediately.
Should this occur, remove the obstacle and press and hold OPEN/
CLOSE again to lower the monitor.
• When the movable monitor is opened, do not place any object on the
monitor and be careful not to bump or apply any pressure to the
monitor while it is open. This can cause damage to the mechanism.
• In low ambient temperature conditions, the display may be dark for a
short period of time immediately after the power is turned on. Once
the LCD has warmed up, the display returns to normal.
• For your safety, some operation of the unit cannot be performed
while the vehicle is in motion. In this case, first stop the vehicle and
engage the parking brake, then perform the operation.
Adjusting the Monitor Viewing Angle
Adjust the monitor’s angle for better visibility.
Press TILT DN and UP to adjust the monitor's angle so
the screen will be in the best viewing position.
Pressing the buttons produces a beep and changes the screen
angle between 40 and 105 degrees.
• By pressing TILT DN or UP and holding, the angle changes
continuously.
• If the monitor touches an obstacle while the angle is being adjusted
the unit stops the screen immediately.
• The screen color will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
• If the voltage of the vehicle's battery power is low, the screen may
blink when the screen angle is changed. This is normal and not a
malfunction.
11-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 12 Wednesday, December 1, 2004 4:20 AM
Recalling the Source
Moving the Monitor to be Flat
When you want to operate some function on the car (air conditioner,
etc.) which is hidden by the raised monitor, use this function.
1
When the monitor is open, press FLAT.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
The source selection screen is displayed.
The monitor moves to the flat position.
2
Touch [SOURCE] on the main screen.
Display example for source selection screen
Press FLAT again.
The monitor returns to the previous angle.
• The monitor returns to the previous angle 10 seconds after being
moved to the flat position.
• If an excessive force is added to the monitor when the monitor is flat,
putting an object on the back of the monitor for example, it may
cause a malfunction.
Adjusting the Volume
Changes to main source screen
Displays source modes that can be selected
Adjust the volume by turning the Rotary encoder.
Volume: 0 - 35
Lowering Volume Quickly
(The kind of source modes that are displayed varies
depending on connection and setting)
2
Touch [RADIO].
The screen changes to the Radio mode main display.
Main screen example for Radio mode
Activating this function will instantly lower the volume level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level decreases by about 20 dB.
Pressing MUTE again brings the audio back to its previous level.
How to view the Display
Touch button operation
The display unit is equipped with tactile feedback (PULSETOUCH™).
What is the tactile feedback (PULSETOUCH™) ?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
• Be sure to touch the button lightly with the pad of your finger on the
display to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
About the expression of touch buttons in this Owner’s
Manual
• Display buttons in this manual are shown in bold with
[ ] (e.g. [SOURCE]).
• This Owner’s Manual explains mainly the function of touch
buttons, when a touch button and a unit button have the same
function.
Displays the source name, such as radio band, etc.,
that is selected
Changes to VISUAL selection screen
Changes to SETUP selection screen
Displays time
Displays shortcut menu screen (see pages 13)
Function Guide:
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]* or [P1/3]* on the function guide, and many other
operations can be performed.
Displays volume level
Working state indicator
Changes to the source selection screen (to Step 1
screen)
* Display may vary depending on the connected devices.
• When an optional DVD player or DVD changer compatible with AiNET is connected, AUX 1 appears as “EXT.DVD” or “DVD CHG”
on the display.
• When both the optional DVD player and DVD changer compatible
with Ai-NET are connected, AUX 1 appears as “DVD-1” and AUX 2
as “DVD-2” on the display (When the optional expansion box VPES431 is connected).
• When i-Personalize and OTHER SETUP are selected, these
operations may only be carried out after the car is parked.
12-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 13 Wednesday, December 1, 2004 4:20 AM
3
The screen changes to another source by touching
[SOURCE] on the main source screen.
Display example for shortcut menu screen
• The screen can be changed to the VISUAL selection screen by
touching [VISUAL].
Set to VISUAL in “Setting the VISUAL Touch Button” (page 34).
• The screen can be changed to the SETUP selection screen by
touching [SETUP].
• After 5 seconds of each operation in the visual mode, the screen
changes to the visual screen only.
To display the source selection screen, touch the display panel, then
touch [CONTROL] on the screen. The source selection screen
appears by touching [SOURCE] on the changed main source screen.
The shortcut menu
screen closes by
touching this area.
Shortcut Screen
In the main source display, shortcuts for set up of Media Xpander, Bass
MAX EQ, Visual EQ, and DOLBY PLII can be shown and their settings
can be made directly.
1
Touch [
screen.
The setup screen is
displayed by touching
one of these modes.
Display example for setup screen
] on the far right of the main source
The shortcut menu screen is displayed. (Displayed when
DEFEAT is set to OFF. However, visual EQ is displayed,
regardless of turning DEFEAT ON or OFF.)
2
Touch a desired setup menu.
MX (Media Xpander):
Selects the MX mode of the currently displayed audio source.
Visual EQ:
Selectable when the visual source mode is turned on.
DOLBY PLII:
Displayed when an external audio processor is connected.
Close the Shortcut menu screen by touching [
].
The screen changes to the setup screen mode by
touching another mode.
Your desired setting can be made by using operation
buttons.
The shortcut menu screen closes by touching this area.
Bass Max EQ:
Allows choosing any desired mode. (This function cannot be set
when an external audio processor is connected. The setting can
be carried out on the audio processor.)
Displaying the Numeric Keypad Input
Screen
The numeric keypad input screen is displayed when the DVD mode is
selected for searching a title or chapter, and for entering a country code
or password for the DVD setup item, and also when selecting a channel
number in the SAT Radio mode.
1
2
Touch [10KEY] on the main source screen.
Touch the desired numeric key.
13-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 14 Wednesday, December 1, 2004 4:20 AM
Display example for numeric keypad
Radio
Display example for Radio main screen
Operation buttons of this area can be used while
displaying the numeric keypad input screen.
Input screen area
Closes numeric keypad input screen
All input numbers will be deleted
Previous number will be deleted
Input number is confirmed
Numeric keypad
The numeric keypad input screen closes when the area
is touched while displayed.
3
Touch [ENT] to confirm your entry.
Listening to the Radio
Dual-Screen Display
The connected AMP Link-compatible external amplifier can be
displayed in dual-screen on the main source screen.
1
Touch [VISUAL] on the main source screen.
The VISUAL selection screen appears.
To make the setting, set to “Setting the VISUAL Touch
Button” (page 34).
2
[SOURCE] button: Refer to page 12
[VISUAL] button: Displays the VISUAL selection screen
[SETUP] button: Displays the SETUP selection screen
[
] button: Refer to page 13
Displays the preset number/frequency.
Touch [DUAL SCREEN].
1
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2
Touch [RADIO].
The radio mode is activated and the display changes to the
Radio Mode screen.
3
Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
The main source screen is restored showing the dualscreen display.
FM-1
4
Display example for the dual-screen
FM-2
AM
FM-1
Touch [TUNE] to choose the tuning mode.
Each touch changes the tuning mode display.
Distance
Touch [VISUAL] to cancel the dual-screen display.
The VISUAL selection screen appears.
4
Touch [NORMAL].
The normal screen will be restored.
Manual
Distance
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode (with DX SEEK indicator ON);
Both strong and weak stations will be tuned in.
- Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
Changes the AMP display
for the connected amplifier.
3
Local
5
Touch [
], [
] or [
], [
] to change the
radio frequency up or down respectively.
When the button is touched and held, the frequency
changes continuously until the button is released.
When a stereo FM station is tuned in, the STEREO indicator appears
in the display.
14-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 15 Wednesday, December 1, 2004 4:20 AM
Manual Storing of Station Presets
1
2
3
4
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
CD/MP3/WMA
Display example for MP3/WMA main screen
Touch [P1/2] to change the function guide.
Touch [MEMORY].
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] within 5 seconds.
The selected station is stored.
5
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
A total of 18 stations can be stored in the preset memory (6
stations for each band; FM1, FM2 or AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Automatic Memory of Station Presets
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch [A.MEMO].
The tuner automatically seeks and stores 6 strong stations into
[P.SET 1] to [P.SET 6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P.SET 1].
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
Tuning to Preset Stations
[SOURCE] button: Refer to page 12
[VISUAL] button: Displays the VISUAL selection screen
[SETUP] button: Displays the SETUP selection screen
[
] button: Refer to page 13
[
] button: Refer to page 24
CD:
Displays track text*1 in the upper line.
Displays Disc Text*1 in the lower line.
MP3/WMA:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name, the album name/artist
name are displayed if there is ID3 tag information.
CD:
Displays the track number/disc number*2/elapsed time.
MP3/WMA:
Displays the folder number/file number/disc number*3/
elapsed playback time
*1 Displayed when a CD text disc is inserted.
*2 Displayed when a CD changer is connected.
*3 Displayed when an MP3 compatible CD changer is connected.
You can tune in the preset stations in memory on each band using the
preset number.
1
2
After selecting the desired band, touch [P1/2] to
change the function guide.
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has a station stored to it.
The preset station is received.
15-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 16 Wednesday, December 1, 2004 4:20 AM
Playback
Repeat Play
1
Touch [
] to play back repeatedly the track currently
being played.
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2
Touch [DVD PLAYER].
The track (file) will be played repeatedly.
Touch [
] again and select OFF to deactivate Repeat play.
The display shows the DVD player mode screen.
When a CD/MP3/WMA is inserted into the DISC SLOT of the
IVA-D310, with the label side facing up, the unit starts to
play the CD/MP3/WMA.
3
Touch [
(file).
] or [
] to select the desired track
Returning to the beginning of the current track (file):
Touch [
].
Fast backward :
Touch and hold [
].
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
].
/ ] again will resume playback.
To eject the disc
Press
RPT DISC*1
CD: RPT
(off)
RPT
MP3/WMA:
1 Touch [P1/2]*3 to change the function guide.
2 Touch [
] and select the desired Repeat play.
<Monitor display>
RPT
RPT FLDR*2
RPT DISC*1
(off)
RPT
*1 If a CD Changer or an MP3 compatible CD changer is connected
and the RPT DISC mode is selected, the unit repeatedly plays back
all tracks (files) on the disc selected.
*2 Only files in a folder are repeatedly played back.
3
* Display may vary depending on the connected devices.
].
To pause playback
Touch [ /
Touching [
<Monitor display>
M.I.X. (Random Play)
Touch [
] during playback.
The tracks (files) on the disc will be played back in a random
sequence.
.
To cancel M.I.X. play, touch [
• The IVA-D310 models include a built-in MP3/WMA unit. You can
play CD-ROMs, CD-Rs, and CD-RWs containing MP3/WMA files on
this unit. Use the format compliant with this unit.
For further information about playing or storing MP3/WMA files,
refer to pages 17 and 18 before using the unit.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The unit can play discs containing both audio data and MP3/WMA
data.
• The MP3/WMA indicator is lit during MP3/WMA playback.
• The track display for CD audio data playback is the track numbers
recorded on the disc.
• Three-inch (8cm) CD’s can be used.
• “Playing MP3/WMA Data” is mentioned on page 32 “GENERAL
Setup.”
• When an MP3/WMA disc is played, it sometimes takes a few moment
until it starts.
• Touch [
] to activate the search mode. For operations, refer to
“Search Function” on page 24.
However, the search mode function does not work in the CD changer
mode.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If about 15 seconds passes without removing the disc after pressing
, the disc is automatically inserted into the unit. In this case, start
playback by touching [ / ] since the unit has been paused.
].
<Monitor display>
CD: M.I.X.
M.I.X. ALL*1
(off)
M.I.X.
MP3/WMA:
1 Touch [P1/2]*4 to change the function guide.
2 Touch [
] and select the desired M.I.X. play.
<Monitor display>
M.I.X. FLDR*3
M.I.X.*2
(off)
M.I.X. FLDR*3
*1 If a CD Changer equipped with the M.I.X. ALL function is connected,
M.I.X. ALL will also be selectable.
In this mode, the tracks on all the CDs in the current magazine will
be included in the random playback sequence.
*2 If an MP3 compatible CD changer is connected, all files in a disc are
played back in random sequence, and playback shifts to the next disc.
*3 Only files in a folder are played back in random sequence in the
M.I.X. FLDR mode.
*4 Display may vary depending on the connected devices.
Selecting Folders (concerning MP3/
WMA)
Touch [F.DN] or [F.UP] to select the folder.
16-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 17 Wednesday, December 1, 2004 4:20 AM
About MP3/WMA
Media supported
The media that this device can play back are CD-ROMs, CD-Rs
and CD-RWs.
Corresponding File Systems
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA data) or distributing, transferring, or copying it, whether
for free or for a fee, without permission of the copyright holder is
strictly prohibited by the Copyright Act and by international
treaty.
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
Formats supported
This device supports CD-ROM, CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Order of files
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA allows you to create music files and store them at higher
ratios of compression than MP3 audio data (approx. half original
size). This is achieved while still maintaining CD quality sound.
The unit plays the files in the order that the writing software
writes them. Therefore, the playing order may not be the same
as the order you input. The playback order of the folders and
files is as follows. However, the folder and file playback order
differs from the folder no. and file no. indicated on the display.
Method for creating MP3/WMA files
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user’s manual for that software.
MP3/WMA files that can be played back by this device have the
file extension “mp3” / “wma”. Files with no extension cannot be
played back. (WMA ver. 7.1 and 8 are supported)
Root
Folder
Supported playback sampling rates and bit rates
MP3
Sampling rates: 32 kHz ~ 48 kHz
Bit rates:
32 - 320 kbps
WMA
Sampling rates: 32 kHz ~ 48 kHz
Bit rates:
32 - 320 kbps
This device may not play back correctly depending on sampling
rates or bit rates.
ID3 tags/WMA tags
If tag data is in an MP3/WMA file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data
(maximum 128 characters).
Folder
MP3/WMA File
This device can only display single-byte alphanumeric
characters and the underscore. For non-supported characters,
“NO SUPPORT” is displayed.
The number of characters may be limited, or not correctly
displayed, depending on the tag information.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CD-RW
using CD-R writing software. A disc can hold up to 1024 files/
256 folders (including Root Folders).
Depending on the structure of the folders or files, it may take
time to read a disc. In this case, it is recommended to decrease
the number of folders or files.
17-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 18 Wednesday, December 1, 2004 4:20 AM
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
DVD/Video CD
Display example for DVD main screen
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1
kHz, so the sound is sampled (recorded) 44,100 times per second.
The higher the sampling rate, the higher the sound quality, but also
the larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
WMA: WMA tag
Root folder
The root folder is found at the top of the file system. The root folder
contains all folders and files.
[SOURCE] button: Refer to page 12
[VISUAL] button: Displays the VISUAL selection screen
[SETUP] button: Displays the SETUP selection screen
[
] button: Refer to page 13
Displays the disc (DVD VIDEO, VIDEO CD) being
played back.
Displays the title number/chapter number/elapsed
playback time for a DVD.
Displays the track number/elapsed playback time for a
video CD (When PBC is turned off).
• Some operations cannot be carried out depending on the disc or
playback screen.
• Displays of the function guide [P1/2], etc., may vary depending on
the connected device(s).
Playing DVD/Video CD
IVA-D310 has a built-in DVD player. When an optional Alpine DVD/
video CD/CD player (or DVD changer) is connected to the IVA-D310,
you can control it from the IVA-D310. (except some operations)
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the DVD/TV/Video while driving the
vehicle. The driver may be distracted from looking
ahead and an accident could occur.
Install the IVA-D310 correctly so that the driver cannot
watch DVD/TV/Video unless the vehicle is stopped
and the emergency brake is applied.
If the IVA-D310 is not installed correctly, the driver will
be able to watch the DVD/TV/Video while driving the
vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
18-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 19 Wednesday, December 1, 2004 4:20 AM
To display the DVD mode screen
To watch a video source, your vehicle must be parked with the ignition
key in the ACC or ON position. To do this, follow the procedure below.
1 Push the foot brake to bring your vehicle to a complete
stop at a safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 While the parking brake is being engaged the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD mode, as
long as the car's ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of “To display the DVD mode
screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
To eject the disc
Press
.
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• DO NOT insert discs containing maps for the navigation system.
Doing so could result in damage.
• Refer also to “DVD Setup” (pages 27 to 31).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• To return to the previous screen during video CD playback, touch
[ ] after touching [P1/2] of the function guide. However, the
function may vary depending on the disc.
• If about 15 seconds passes without removing the disc after pressing
, the disc is automatically inserted into the unit. In this case, start
playback by touching [ / ] since the unit has stopped.
If a menu screen appears
On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
Direct Menu Operations (DVD only)
•
•
•
•
Caution
Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
If you switch the power or Ignition Key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Menu Operations (DVD only)
1 Touch [KEY].
The menu operation mode will be displayed.
• Play Position Memory Function
Even if you turn power off or switch the Ignition Key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.
1
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2
Touch [DVD PLAYER].
The display shows the DVD player mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
Touch [MENU RTN] to return
to the previous display.
2 Select a desired menu item by touching [ ], [
[ ].
3 Touch [ENTER] to confirm the selected item.
], [
] or
When an optional Alpine DVD player is connected:
Insert a disc into the DVD/video CD/CD player, the player
starts playing.
• The operation screen changes to the visual screen in the DVD or
video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see “Switching Display Modes” on page 25.
19-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 20 Wednesday, December 1, 2004 4:20 AM
Numeric Keypad Input Operations (DVD)
Displaying the Menu Operation Mode
Screen (DVD only)
1
Touch [P1/2] on the DVD mode main screen.
The function guide changes.
2
Touch [MENU CONT].
The menu operation mode screen appears.
1 Touch [KEY].
The menu operation mode appears.
2 Touch [KEY] again.
The numeric keypad input mode screen appears.
• For further operation, see “If a menu screen appears” on pages 19
and 20.
Turning the PBC Function ON or OFF
(Video CD only)
The following describes how to turn a video CD equipped PBC
(playback control) on or off.
The numeric
keypad input
screen closes
when the area
is touched
while
displayed.
Touch [PBC] on the video CD mode main screen.
Touching [PBC] sequentially turns the PBC on and off.
Stopping Playback (PRE STOP)
Touch [RTN] to close the numeric
keypad input screen.
3 Touch a desired number.
4 Touch [ENT] on the numeric keypad mode screen to
confirm your selection.
Press the stop button during playback to stop playback. That position is
stored in the memory.
1
Touch [ ] once during playback.
“PRE STOP” is displayed.
Numeric Keypad Input Operations (Video CD)
When PBC is turned OFF, the menu screen is not displayed. Turn it ON
to display the screen (See “Turning the PBC Function ON or OFF
(Video CD only)” on page 20).
1 Touch [P1/2] in the video CD mode to change the
function guide.
2 Touch [10KEY].
The numeric keypad is displayed.
3 Touch and input a desired number.
4 Touch [ENT] to confirm.
2
Touch [
/
] in the PRE STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
Stopping Playback
Touch [ ] twice or touch and hold [ ] for at least 2
seconds during playback.
“STOP” is displayed, and playback stops.
Displaying the Top Menu Screen
(DVD only)
• Playback starts from the beginning when [
playback is stopped.
/
] is touched while
When a DVD contains two or more titles, the top menu screen appears.
Touch [TOP MENU] on the DVD mode main screen.
The top menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 19 and 20.
Fast-forwarding/Fast-reversing
1
Touch [MENU] on the DVD mode main screen.
The menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 19 and 20.
] (Fast-reverse) or
When touched and held for more than 1 second, the disc is
forwarded/reversed at double speed. When held for 5 more
seconds or longer, the disc is forwarded/reversed at 8 times
the normal speed.
Displaying the Menu Screen (DVD only)
With a DVD having two or more menus, a menu screen will appear for
the programs available, in addition to the main programs.
During playback, touch [
[
] (fast-forward).
2
Stop touching [
playback.
] or [
] to return to normal
• No sound is played back during 8 times fast-forwarding/fastreversing, or video CD fast-forwarding/fast-reversing.
• Subtitles are not usually displayed during 8 times fast-forwarding/
fast-reversing in the DVD mode. However, they may be displayed,
depending on the disc.
• For DVDs and video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
20-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 21 Wednesday, December 1, 2004 4:20 AM
Finding the Beginnings of Chapters or
Tracks
Chapter/Track/Title Repeat Playback
During playback, touch [
DVD
] or [
].
The chapter/track switches each time the button is touched, and
playback of the selected chapter/track starts.
:Touch this to start playback from the beginning of the
following chapter or track.
:Touch this to start playback from the beginning of the
current chapter or track.
Use this function to play the disc’s titles, chapters or tracks repeatedly.
1
2
During playback, touch [P1/2].
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
<Monitor display>
• Some DVDs do not have chapters.
• Be sure to turn PBC off before starting the search (See “Turning the
PBC Function ON or OFF (Video CD only)” on page 20).
The chapter is played repeatedly.
The title is played repeatedly.
Supplementary explanation
“Chapters” are divisions of movies or musical selections on
DVDs.
“Tracks” are divisions of movies or musical selections on
video and music CDs.
During playback, touch [
Touch [
/
/
• Display may vary depending on the connected devices.
• The REPEAT OFF mode is always turned off when [REPEAT] is
touched and held for at least 2 seconds.
Video CD
Playing Still Frames (Pausing)
1
2
The playback returns to normal mode.
1
2
].
During playback, touch [P1/2].
During playback, touch [
<Monitor display>
• No sound is played during the still frame mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
The track is played repeatedly.
The disc is played repeatedly.
Forward/reverse frame-by-frame
Playback
1
] or [
].
Touch [
/
] to return to normal mode.
• No sound is output during forward/reverse frame-by-frame playback.
• Reverse frame-by-frame cannot be carried out on the video CD.
Slow Motion Playback
1
2
*
Playback does not repeat.
* Displayed only in the changer mode.
In the pause mode, touch [
The picture advances or reverses by one frame each time
the button is touched.
2
] on the main unit.
The repeat mode switches every time the button is touched.
] to resume playback.
Searching by Title Number (DVD only)
When [
] or [
] is touched and held while in
the pause mode, the 1/8th speed slow motion
playback mode is set.
When held in for 5 more seconds, the slow motion
speed switches to 1/2 the normal speed.
Stop touching [
] or [
[ / ] to playback.
• Display may vary depending on the connected devices.
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off. See “Turning the PBC Function ON or OFF (Video
CD only)” on page 20.
• For some discs it is not possible to switch the repeat mode.
• Step 1 is not necessary when a DVD changer or DVD player is
connected.
] to pause, and touch
• No sound is played during slow motion playback.
• Reverse slow motion playback is not available on the video CD.
• 1/2, 1/8 are approximate speeds. The actual speed differs from disc to
disc.
Use this function to easily find positions on the DVD using the DVD’s
titles.
1
Touch [P1/2] while playback is stopped.
The function guide appears.
2
Touch [10KEY].
The numeric keypad input mode screen appears.
3
Enter a desired title by touching its title number.
See page 20 for operation of the numeric keypad.
21-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 22 Wednesday, December 1, 2004 4:20 AM
4
Confirm your selection by touching [ENT].
Playback will start from the title number selected.
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of PRE STOP.
• Some disc may not accept any operation.
Searching Directly by Chapter or Track
Number
2
3
1
2
Touch [10KEY].
Video CDs with multiplex audio
The numeric keypad input mode screen will appear.
1
Touch and enter the chapter or track number you
want to play.
2
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
During playback, touch [P1/2].
The function guide changes.
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
Touch [AUDIO].
The left and right channels will be output as shown in the
figure below, each time the button is touched.
Touch [ENT] to confirm your selection.
Switching the Angle (DVD only)
During playback, touch [P1/2].
The function guide changes.
<Monitor display>
• This function is not available for a disc on which chapters or tracks
are not stored.
2
Touch [AUDIO].
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
Playback will start from the selected chapter or track.
1
During playback, touch [P1/2].
The function guide will appear.
Touch [P1/2] in any mode other than stop mode.
See page 20 for operation of the numeric keypad.
4
DVDs can have up to 8 different audio tracks. These alternate tracks can
be switched during playback.
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
Switching the Audio Tracks
AUDIO L/R
AUDIO L/L
AUDIO R/R
AUDIO L/R
Switching the Subtitles (Subtitle
Language) (DVD only)
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
1
During playback, touch [P1/2].
The function guide changes.
2
Touch [SUBT.].
Touching this button repeatedly selects sequentially the
subtitle languages recorded on the disc, and then turns the
subtitles OFF.
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc’s default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
off. However, the subtitle language may differ depending on the disc.
22-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 23 Wednesday, December 1, 2004 4:20 AM
Switching from the disc menu
For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
2
Touch [MENU] or [TOP MENU] to display the
menu.
Select an item to confirm it.
Other Useful
Features
Adjusting the Audio
See “If a menu screen appears” on pages 19-20.
Press the Rotary encoder on the unit.
Displaying the Disc Status for DVD/Video
CD
The display changes to the Audio Adjustment screen.
Display Example for Audio Adjustment Screen
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD or of the currently
playing video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
The operation menu screen is displayed.
2
Touch [CONTROL] within 5 seconds.
The display status is displayed for 5 seconds.
Adjust the volume of the front and rear speakers by
touching [F] or [R].
Adjust the volume of the left and right speakers by
touching [L] or [R].
Determine your desired setting value by touching and
moving [ ].
Touches [ ], [ ] or [ON], [OFF] to adjust to your
preference.
• Touch [AUDIO MODE] on the SETUP selection screen to change to
the Audio Adjustment screen.
• Touching [CONTROL] will change to the main source screen.
Adjusting the Balance
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
Adjusting the Fader
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
Adjusting the Subwoofer Level
Touch [ ] or [ ] of SUBW. to adjust the subwoofer
output.
Setting range: 0 to 15
• The level adjustment becomes available when 0° or 180° is set in
“Subwoofer On and Off” (page 42).
Adjusting NAV. LEVEL
Touch [ ] or [ ] of NAV. to adjust the volume of
navigation interruption.
Setting range: 0 to 15
• This adjustment becomes available when NAV.MIX is turned on in
“Setting the Navigation Interruption” (page 33).
• The setting navigation interruption is not displayed if an external
audio processor not compatible with NAV.MIX is connected.
23-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 24 Wednesday, December 1, 2004 4:20 AM
Turning defeat ON or OFF
Touch [ON] or [OFF] of DEFEAT to set to ON or OFF.
If you set the defeat to ON, MX is turned OFF and EQ is returned
to the initial setting.
Adjusting the Balance/Fader Directly
Touch and move [
] to a desired setting.
Or touch a desired setting range, and [ ] will move to that
location.
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Search Function
1
Touch [
] on the function guide while in the CD or
MP3/WMA mode.
Search list screen is displayed.
Select a desired track or folder.
Touch [
] for direct playback.
When a hierarchical list is prepared, [
] will be
displayed. Touch [
] to display the respective
hierarchy list screens.
Display Example for Search Screen
• The search function does not work on the DVD, video CD or CD
changer.
• A folder list is displayed only during MP3/WMA playback when the
DVD player (DVA-5210) or changer compatible with MP3 is
connected.
Internal CD player mode
1 The track list* screen appears.
* If the CD is text compatible only.
2 Touch [ ] of a desired track text*.
The selected track will be played back.
• “TRACK” is displayed in the track text list if there is no text
on the disc.
Internal MP3/WMA Player/external MP3-compatible DVD
Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
].
([
] appears only when a file is present in the selected
folder.)
The file list screen is displayed.
• Touch [
] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.
[
] is displayed if there is a hierarchical list.
Select directly by touching [ ], and its Track (or folder/
file) is played back.
Scroll the list one paragraph at a time by touching [ ]
or [ ].
Touch and slide up or down to scroll the list backwards
or forwards.
Touch [RETURN] to return to the previous list screen.
24-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 25 Wednesday, December 1, 2004 4:20 AM
Rear Entertainment Function
Switching Display Modes
The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
After carrying out the steps 1 to 3 of “To display the DVD mode
Screen” explained on page 27, perform the operation described below.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
While your vehicle is parked, touch [WIDE] on the visual
source screen.
Each touch changes the display modes as follows:
MODE 1
(WIDE)
MODE 2
(CINEMA)
MODE 3
(NORMAL)
MODE 1
(WIDE)
Touch [REAR SELECT].
Rear Select display appears.
• This function cannot be used when MONITOR OUT 1 or 2 is set
to OFF in the SYSTEM SETUP.
3
Touch the desired source such as visual (auxiliary
input, built-in DVD) to select.
REAR.1: External monitor which is connected to AUX OUT of
the tuner box on this unit. (If the optional expansion
box (VPE-S431) is not connected), or an external
monitor is connected to AUX OUT1 of the optional
expansion box (VPE-S431).
REAR.2*: External monitor which is connected to AUX OUT 2 of
the optional expansion box (VPE-S431)
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
* REAR.2 is not displayed if only an external monitor is connected.
The setting screen is displayed for REAR.2 if the external monitor is
connected to the optional expansion box (VPE-S431).
• Touch [OFF] to cancel the rear entertainment function.
• When the “Setting the AUX Mode” (page 34) is set to OFF, the
auxiliary source is not displayed.
Switching the function of the remote
sensor
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16 : 9 ratio.
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
4
Touch [FRONT], [REAR 1] or [REAR 2].
The monitor which has a priority to the remote control
operation is changed.
FRONT:
REAR1:
REAR2:
The remote sensor of this unit is effective.
The remote sensor of the external monitor
connected to AUX OUT of the tuner box of this
unit, or the optional expansion box (VPE-S431)
is effective, and the remote control can operate
only the source selected for the terminals.
The remote sensor of the external monitor
connected to AUX OUT of the optional
expansion box (VPE-S431) is effective, and the
remote control can operate only the source
selected for the terminals.
In Mode 3 (Normal), the monitor displays a normal picture at the
center of the screen with a vertical black band at each side.
• The sensor of the touch panel rear monitor has priority over the
sensor of the remote control, if the rear monitor (connected to the
Alpine touch panel rear monitor via the Monitor control lead) is
touched, regardless of the remote control sensor switch setting. Note,
however, that the sensor of the remote control that has been set takes
priority if it has been 5 seconds since last touching the panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to REAR1 or REAR2, some touch button
operations ( [ ] STOP, etc.) cannot be performed.
In this case, set the remote control sensor to FRONT.
25-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 26 Wednesday, December 1, 2004 4:20 AM
Switching the Visual Source Only
(Simultaneous Function)
You can watch the video portion of another source while listening to the
current source.
• After carrying out the steps 1 to 3 of “To display the DVD mode
Screen” explained on page 27, perform the operation described
below.
1
Setting VISUALIZER
This setting is available when the expansion box (VPE-S431) is
connected.
1
The VISUAL selection screen is displayed.
2
Touch a desired visual source.
Touch [VISUALIZER].
The Visualizer setting screen is displayed. If you do not
touch any button for 5 seconds, the operating display
buttons, [CONTROL] etc., will disappear.
Touch [VISUAL] on the audio source screen.
The VISUAL selection screen appears.
2
Touch [VISUAL] on the main source screen.
3
The visual source is switched to the selected one.
Touch the screen (visual screen only) after the
operating display has disappeared.
The VISUALIZER setup mode is displayed.
Cancelling the Simultaneous Function
1
2
3
4
Touch the visual screen to display the main control.
MODE1 to
MODE6 / OFF: Recalls the maker’s setting mode on the
expansion box (VPE-S431).
SCAN:
Displays the pattern of MODE1 to MODE6
repeatedly.
Touch [CONTROL].
Touch [VISUAL] within 5 seconds.
The VISUAL selection screen appears.
4
Canceling the Visualizer Function:
Touch [NORMAL].
Touch [NORMAL] on the VISUAL selection screen.
The simultaneous function is canceled.
• To make the setting, set to “Setting the VISUAL Touch Button” (page
34).
• This setting is enabled when OFF is selected for “Setting the Visual
Effect” (page 26) and ON is selected for, “Setting the VISUALIZER
Mode Display” (page 34).
• To make the setting, set to “Setting the VISUAL Touch Button” (page
34).
• If a DVD player is connected, you can receive the DVD picture/
sound.
DVD player (DVA-5205) or DVD changer (DHA-S680) is connected:
Press and hold V.OUT on the remote control supplied with the DVD
player or DVD changer for more than 2 seconds. The picture and
sound of the DVD will be output.
The DVA-5210 is connected:
Press V.OUT on the remote control (included with the DVA-5210) to
output DVD picture/sound.
• The simultaneous function cannot be used when the Audio source is
in the navigation mode.
When NAV. is set in “Setting the VISUAL Touch Button” (page 34),
only the navigation screen can be recalled.
Setting the Visual Effect
This setting becomes available when the expansion box (VPE-S431) is
connected.
1
When Blackout mode is turned on, the monitor display will turn off to
reduce power consumption.
This additional power enhances the sound quality.
Touch [VISUAL] on the main source screen.
The VISUAL selection screen is displayed.
2
Touch [OFF].
The backlit-display portion goes out.
3
Touch [OFF] again to cancel the display backlight.
• To make the setting, set to “Setting the VISUAL Touch Button” (page
34).
• If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
• While the backlighting is turned off, the function indicator blinks
during navigation voice interruption.
Touch [VISUAL] on the visual main source screen.
The VISUAL selection screen is displayed.
2
Touch [VISUALIZER].
The Visualizer setting screen is displayed. If you do not
touch any button for 5 seconds, the operating display
buttons, [CONTROL] etc., will disappear.
Blackout Mode On and Off
1
Set ON/OFF by touching [ON] or [OFF] of
VISUALIZER within 5 seconds.
3
Touch the screen (visual screen only) after the
operation display has disappeared.
The VISUALIZER setup screen appears.
4
Select “ON” by touching [ ] or [ ] of V.EFFECT
within 5 seconds.
ON:
Turns on the function for enhancing visual effects when
connected to two or more external monitors.
Set to OFF to cancel.
• To make the setting, set to “Setting the VISUAL Touch Button” (page
34).
• V.EFFECT is not displayed when the audio main source is selected.
• When the visual effect is set to ON, the rear monitor source cannot be
changed from the unit.
• This setting may not be performed while driving.
26-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 27 Wednesday, December 1, 2004 4:20 AM
Monitor Setting
Monitor Setting Operation
Following Steps 1 to 4 describe the common procedures for
operating the MONITOR setting function. For details of the
setting function items, refer to descriptions of respective items.
1
Setup
DVD Setup
DVD Setup Operation
To display the DVD mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
Touch [MONITOR].
The MONITOR screen appears.
3
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
SLIDE / MONITOR O/C (OPEN/CLOSE)
4
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Touch [RETURN] to return to the previous screen.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of “To
display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
Selecting the Monitor Position
The monitor can be set in 2 positions.
Setting item: SLIDE
Setting content: BACK / FRONT
The DVD Setup operation can be carried out after removing the
disc from the unit or when playback of the disc has stopped.
BACK: Slides the display backwards.
FRONT: Slides the display forwards.
• If the monitor is forcibly pushed or pulled, you may not be able to set
the monitor angle or position. In this case, press OPEN/CLOSE to
close the monitor once, and then open the monitor again.
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
Setting Automatic Opening/Closing of the
Monitor
Setting item: MONITOR O/C (OPEN / CLOSE)
Setting content: MANUAL / FULL / CLOSE
MANUAL: The monitor is manually opened or closed by
pressing OPEN/CLOSE.
FULL:
The monitor automatically opens and closes when
the ignition key is turned to the “ACC” or “ON/OFF”
position.
CLOSE: The monitor automatically closes when the ignition
key is turned OFF.
2
Touch [OTHER SETUP].
The OTHER SETUP screen appears.
3
Touch [
] of DVD SETUP.
The DVD setup screen appears.
4
Touch [ ] or [ ], etc., of the desired item to change
its setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT MODE /
DOWNMIX MODE / TV SCREEN
27-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 28 Wednesday, December 1, 2004 4:20 AM
Display example for DVD setup screen
Setting of the Menu Language
Set the language used for the menus (title menu, etc.).
Setting item: MENU LANGUAGE
Setting contents: AUTO / ENGLISH / GERMAN / FRENCH /
JAPANESE
• When “AUTO” is selected, the primary menu language among the
recorded ones is played.
Setting of the Audio Language
Set the audio language produced from the speakers.
Touch [ ] or [ ] to set a desired language.
Touch [CODE] to display the numeric keypad screen.
Touch [ ] or [ ] to scroll a setting item list by one
paragraph.
Touch and slide up or down to scroll the list backwards
or forwards.
Setting item: AUDIO LANGUAGE
Setting contents: AUTO / ENGLISH / GERMAN / FRENCH /
JAPANESE
• When “AUTO” is selected, the primary audio language among the
recorded ones is played.
Setting of the Subtitle Language
Set the language of the subtitles displayed on the screen.
Setting item: SUBT. LANGUAGE
Setting contents: AUTO / ENGLISH / GERMAN / FRENCH /
JAPANESE
• When “AUTO” is selected, the primary subtitle language among the
recorded ones is played.
To play in a language other than those displayed
The numeric keypad input screen closes when the area
is touched while displayed.
Numeric keypad input screen
The numeric keypad is used if you want to play back in
a language other than that displayed, or to input your
parental lock password, etc.
5
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
• Immediately after changing the settings of DVD mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
when you always want to listen in English. (The language setting is not
effective on some discs. If not, the default language is set from the
factory.)
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 22).
• If the disc does not include the selected language, the disc’s default
language is set.
1 Touch [CODE].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
As for the language number, refer to “List of Language
Codes” (page 64).
3 Touch [ENT] to memorize the number.
Changing the Country Code Setting
Set the country number of which you want to set the rating level
(Parental lock).
Setting item: COUNTRY CODE
Setting content: CODE
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are not cleared even when the vehicle’s battery is
disconnected.
1 Touch [CODE].
2 Touch [ALL DEL] or [BS].
Delete the displayed country number.
3 Touch the 4-digit country code.
As for the country number, refer to “List of Country
Codes” (pages 65 and 66).
4 Touch [ENT] to memorize the code.
28-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 29 Wednesday, December 1, 2004 4:20 AM
Setting the Rating Level (Parental Lock)
Changing the Digital Output Setting
This function can help restrict the viewing of movies to children of
appropriate age levels only.
Use the following procedure to set the digital audio signal output from
the IVA-D310.
Setting item: PARENTAL
Setting content: INPUT
Setting item: DIGITAL OUT MODE
Setting contents: AUTO / LPCM
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• If you want to play back DVD software with the parental lock feature
and its use is currently restricted, change the rating level and the
country number in order to play back the DVD.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
AUTO:
LPCM:
The digital output is switched automatically according
to the type of audio signals being played.
Be sure to select “AUTO” when you want to connect a
digital audio processor and play Dolby Digital audio.
“AUTO” is the factory setting.
The audio signals recorded on the disc are converted
to 48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDs
and CDs) linear PCM audio signals for output.
1 Touch [INPUT].
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111.
Input number are displayed as “*”.
3 Touch [ENT] to memorize the number.
The PARENTAL screen appears.
Set the rating level of PARENTAL
4 Touch [ON] of PARENTAL to turn on.
5 Touch [ ] or [ ] of PARENTAL LEVEL to select the rating
level (1 to 8).
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Touch [RETURN] to return to the previous screen.
Changing the password
4 Touch [INPUT] of PASSWORD CHANGE.
The numeric keypad screen is displayed.
5 Touch the input screen to enter a new 4-digit password
• Keep a note of the number somewhere safe in case you should
forget it.
6 Touch [ENT] to memorize the number.
7 Touch [RETURN] to return to the previous screen.
Changing the rating level temporarily
Some discs may request that you change the rating level set in
the default settings during playback. In this case, the message
appears on the monitor screen “PARENTAL LEVEL CHANGE OK?
[YES] [NO].”
If this screen appears, change the level as follows:
• To change parental level and play, touch [YES].
When [YES] is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in “Setting the Rating Level
(Parental Lock)” you set, then touch [ENT].
• To play without changing the parental level, touch [NO].
(When [NO] is touched, playback will be at the parental level set
in “Setting the Rating Level (Parental Lock).”)
29-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 30 Wednesday, December 1, 2004 4:20 AM
Audio output/Optical digital audio output
Disc
Audio recording format
Digital output setting
Optical digital audio
output (when a digital
audio processor is
connected)
Analog audio output
(Ai-NET, RCA output)
DVD
DTS
AUTO
DTS Elementary Stream
OK
LPCM
LPCM Encode 2ch
Down mix (44.1kHz or
48kHz/16bit)
OK
AUTO
Dolby Digital
OK
LPCM
LPCM (48kHz/16bit)
OK
48kHz/16bit
AUTO
or
LPCM
LPCM (48kHz/16bit)
OK
48kHz/20bit
AUTO
or
LPCM
LPCM (48kHz/16bit)
OK
48kHz/24bit
AUTO
or
LPCM
LPCM (48kHz/16bit)
OK
96kHz/16bit
AUTO
or
LPCM
LPCM (48kHz/16bit)
OK
96kHz/20bit
AUTO
or
LPCM
LPCM (48kHz/16bit)
OK
96kHz/24bit
AUTO
or
LPCM
LPCM (48kHz/16bit)
OK
AUTO or LPCM
LPCM (44.1kHz or
48kHz/16bit)
OK
Dolby Digital
Linear PCM
MPEG2
Video CD
MPEG1
AUTO or LPCM
LPCM (44.1kHz)
OK
CD
Linear PCM
AUTO or LPCM
LPCM (44.1kHz)
OK
DTS
AUTO
DTS Elementary Stream
OK
LPCM
LPCM Encode 2ch
Down mix
(44.1kHz/16bit)
OK
32kHz/16bit
AUTO or LPCM
LPCM Encode 2ch
(32kHz/16bit)
OK
44.1kHz/16bit
AUTO or LPCM
LPCM Encode 2ch
(44.1kHz/16bit)
OK
48kHz/16bit
AUTO or LPCM
LPCM Encode 2ch
(48kHz/16bit)
OK
32kHz/16bit
AUTO or LPCM
LPCM Encode 2ch
(32kHz/16bit)
OK
44.1kHz/16bit
AUTO or LPCM
LPCM Encode 2ch
(44.1kHz/16bit)
OK
48kHz/16bit
AUTO or LPCM
LPCM Encode 2ch
(48kHz/16bit)
OK
MP3
WMA
MPEG Audio
Layer3 Bit Rate:
32kbps~320kbps
Windows
Media™ Audio
Bit Rate:
32kbps~320kbps
30-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 31 Wednesday, December 1, 2004 4:20 AM
Setting the Downmix Mode
GENERAL Setup
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: SURROUND/STEREO
General Setup Operation
SURROUND: Surround compatible Downmix
STEREO:
Stereo Downmix
To display the General mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
Setting the TV Screen Setting
Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-D310.
If the rear monitor is not connected, the screen setting is 16:9.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
Setting item: TV SCREEN
Setting contents: 4:3 LB / 4:3 PS / 16:9
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
• For automatic transmission vehicles, place the transmission lever
in the Park position.
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16 : 9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General mode, as long as the car's ignition has not been turned
off. It is not necessary to repeat the above procedure (1 through
3), of “To display the General mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the General mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of GENERAL Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16 : 9 size
movie).
2
Touch [OTHER SETUP].
The OTHER SETUP screen appears.
3
Touch [
] of GENERAL SETUP.
The GENERAL setup screen appears.
4
Touch [OFF], [ON] or [ ], [ ], etc., of the desired
item to change its setting.
Setting items:
CLOCK / CLOCK ADJUST / DAYLIGHT SAVING TIME /
DEMONSTRATION / BEEP / AUTO SCROLL / FM CONDITION /
ADF* / PLAY MODE / LED DIMMER LEVEL
* Displayed only when XM Satellite Radio Receiver is connected.
5
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
31-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 32 Wednesday, December 1, 2004 4:20 AM
Displaying the Time
Setting the Scroll
The clock indication on the monitor display is turned on or off
respectively.
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: CLOCK
Setting content: OFF / ON
Setting item: AUTO SCROLL
Setting content: OFF / ON
Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed.
ON:
Setting the Time
Setting item: CLOCK ADJUST
Further setting items : HOUR / MINUTE / TIME ADJUST
Setting content: 1-12 / 0-59 / RESET
HOUR:
Adjust the hour.
MINUTE: Adjust the minute.
RESET: If the clock shows less than 30 minutes past, the
minute will be “: 00”; more than 30, the hour
advances.
• The clock-adjusting mode is canceled when the power is turned off,
when [RETURN] or [CONTROL] is touched.
• If this setting is carried out, it is also applied for the clock in the
subdisplay displayed.
Setting Daylight Saving Time
Setting item: DAYLIGHT SAVING TIME
Setting content: OFF / ON
Place the Summer Time mode ON. The time advances by
one hour.
OFF: Return to the ordinary time.
ON:
Demonstration Function
This unit is equipped with a demonstration function capable of showing
basic operations of respective sources on the monitor display.
Setting item: DEMONSTRATION
Setting content: OFF / ON
Turns on the demonstration mode to show the basic
operations.
OFF: Turns off the demonstration mode.
ON:
• The demonstration operation is automatically repeated until the
function is turned off.
• Scroll display of the song, artist and album name is enabled when
iPod is connected.
Setting the Sound Quality of the Tuner
The IVA-D310 incorporates the MAX TUNE SQ for the highest quality
tuner audio. Moreover, you can choose between 3 settings to suit your
own personal sound preferences and usage.
Setting item: FM CONDITION
Setting content: NORMAL / HI-FI / STABLE
NORMAL: Standard setting
HI-FI:
Sound quality priority setting
STABLE: Noiseless priority setting
Setting the Auxiliary Data Field Display
This display can be used only when the optional XM Satellite Radio
Receiver is connected.
Setting item: ADF
Setting content: OFF/ON
ON: The Auxiliary Data Field is displayed in the XM mode.
OFF: The Auxiliary Data Field is not displayed.
Playing MP3/WMA Data
When using discs containing both audio data and MP3/WMA data.
Setting item: PLAY MODE
Setting content: CD / MP3
Plays only the audio data on discs containing both audio
data and MP3/WMA data.
MP3: Plays only the MP3/WMA files on discs containing both
audio data and MP3/WMA data.
CD:
Sound (Beep) Guide Function
Setting item: BEEP
Setting content: OFF / ON
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is
pressed.
• A beep always sounds when opening or closing the monitor,
regardless of this setting.
• Remove the disc from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED DIMMER LEVEL
Setting level: -2 to +2
• The adjustment is available when ON or AUTO is set in “Setting the
Brightness of the Backlighting” (page 35).
32-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 33 Wednesday, December 1, 2004 4:20 AM
SYSTEM Setup
System Setup Operation
To display the System mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Brake to bring your vehicle to a complete stop at a
safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the System mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [OTHER SETUP].
The OTHER SETUP screen appears.
3
Touch [
Setting the External Device Interrupt Mode
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-D310, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.
Setting item: IN INT. MUTE
Setting content: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output. The icon that is set in “Setting
the Interrupt Icon Display” is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
Setting the Interrupt Icon Display
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN INT. ICON
Setting content: INT / TEL
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
] of SYSTEM SETUP.
The SYSTEM setup screen appears.
4
Setting the Navigation Interruption
Touch [ ], [ ] or [OFF], [ON], etc., of the desired
item to change its setting.
Setting items:
IN INT. MUTE / IN INT. ICON / NAV. IN / NAV. MIX / VISUALIZER*
/ AUX IN-1 / AUX IN-2* / AUX IN-3* / MONITOR OUT-1 /
MONITOR OUT-2* / CAMERA IN / VISUAL KEY / A. PROC TYPE
/ OPTICAL OUT
* Displayed when the external expansion box VPE-S431 is
connected.
5
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
• Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
With an Alpine navigation system connected to the IVA-D310, the voice
guidance of the navigation system will be mixed with the radio or CD
play.
Setting item: NAV.MIX
Setting content: OFF / ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
To adjust the navigation interruption volume level, the adjustment
for NAV. LEVEL can be performed in “Adjusting the Audio” on
page 23 after setting to ON.
• The audio volume during the navigation guide can be set by
adjusting the audio volume while the navigation guide continues.
When the navigation guide finishes, the previous audio volume and
the previous screen are restored. For exception, if the navigation cuts
in when the audio volume is lower than the setting level, the audio
volume during the navigation guide is reset the current listening
volume. (When the navigation guide cuts in, the audio volume does
not increase.)
• This setting is effective when NAV.IN of SYSTEM list screen is ON.
• When PXA-H510 or PXA-H900 is connected, NAV.MIX value set in
this unit does not affect PXA-H510 or PXA-H900.
33-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 34 Wednesday, December 1, 2004 4:20 AM
Setting the VISUALIZER Mode Display
Select this display when displaying the source names of VISUALIZER
on the VISUAL selection screen.
Note that this setting is enabled only when the optional expansion box
(VPE-S431) is connected.
Setting item: VISUALIZER
Setting contents: OFF / ON
OFF: “VISUALIZER” and source names are not displayed on
the VISUAL selection screen.
ON: “VISUALIZER” and source names are displayed on the
VISUAL selection screen.
• Switching on or off cannot be done if ON is set in “Setting the Visual
Effect” (page 26).
Setting the AUX Mode
Setting item: AUX IN-1, 2, 3
Setting content: OFF / ON
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• When either a DVD player or DVD changer compatible with Ai-NET
is connected to AUX IN 1, EXT.DVD is displayed on the source
selection screen. When both are connected, DVD-1 is displayed for
AUX IN 1, and DVD-2 is displayed for AUX IN 2.
• AUX IN 2,3 is displayed when the external expansion box (VPES431) is connected.
Naming External Devices
When more than one external device is connected, you can name each
(up to 3) as you like. After setting to ON in “Setting the AUX Mode,”
touch any one of the [
] buttons of AUX IN 1 through 3, then this
setting may be carried out.
Setting items: NAME
Setting contents: AUX / VCR / GAME-1,2 / TV / NAV. / EXT. DVD*
• The selected source name is displayed instead of AUX source name.
When a source is selected, the Function Guide of AUX mode appears.
• Only AUX IN-3 MODE can be named “NAV.” When AUX mode is
selected, “NAV.” is displayed as the source name.
This setting is recomended if you view the navigation screen on the
rear monitor. However, it is available only when the Alpine
navigation system (except RGB navigation) is connected.
• Only when an Alpine TV tuner is connected, can you operate the
displayed function guide from this unit.
* “EXT.DVD” is displayed on the source selection screen when a DVD
player is connected, and “DVD-1-3” is displayed on the source
selection screen when the NAME setting is set to “EXT.DVD” on
more than one AUX (included when an external Ai-NET compatible
DVD player is connected).
Adjusting the External Input Audio Level
After setting to ON in “Setting the AUX Mode,” touch any one of the
[
] buttons of AUX IN 1 through 3, then this setting may be carried
out.
Setting item: LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Setting of the External Monitor Output
Set it to ON when you use the rear entertainment function (page 25).
Setting items: MONITOR OUT-1, 2
Setting contents: OFF / ON
By setting the connected external monitor to ON, the
remote control will be usable.
OFF: When either MONITOR OUT 1 or 2 is set to OFF, only one
monitor can be set by the rear enter function. When both
MONITOR OUT 1 and 2 are set to OFF, REAR SELECT,
which is displayed on the SYSTEM selection screen,
cannot be used.
ON:
• The setting to “MONITOR OUT-2” can be made if optional
expansion box VPE-S431 is connected.
• Switching on or off cannot be done if ON is set in “Setting the Visual
Effect” (page 26).
Setting of the Rear Camera
When the rear camera is connected, rear pictures are output on the
screen.
Setting item: CAMERA IN
Setting contents: OFF / ON
Even if the shift lever is not set to reverse (R), the rear
pictures are output by selecting the CAMERA source.
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON:
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL “Setting the VISUAL Touch
Button” (page 34).
Setting the VISUAL Touch Button
Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
Switches directly to the navigation screen by touching
[VISUAL]. (Only when an Alpine optional RGB
Navigation is connected.)
VISUAL: Recalls the VISUAL Select screen by touching
[VISUAL].
NAV.:
34-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 35 Wednesday, December 1, 2004 4:20 AM
Optical Digital Input Selection for an
External Audio Processor
Make sure “OPTICAL OUT” is ON in “Setting the Digital Output”
(page 35) before switching this setting.
Setting item: A.PROC TYPE
Setting contents: PXA-H510 / OTHER
When connecting any audio processor via an
optical digital cable except the PXA-H510.
Connect the optical digital input connector with the
connector for the Head unit.
PXA-H510: When connecting PXA-H510.
Connect the optical digital input connector with the
connector for the DVD.
OTHER:
• After input selection is completed, turn ignition OFF and back ON
again. Your setting of the optical digital input switch is completed.
Setting the Digital Output
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
DISPLAY Setup
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [OTHER SETUP].
The OTHER SETUP screen appears.
3
Touch [
] of DISPLAY SETUP.
The DISPLAY setup screen appears.
4
Touch [ ], [ ] or [OFF], [ON], etc., of the desired
item to change its setting.
Setting items:
DIMMER / DIMMER LOW LEVEL / BACKGROUND / AUTO
BACKGROUND / FONT TYPE / BASE COLOR / PULSETOUCH /
SCREEN ALIGNMENT
5
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Setting the Brightness of the Backlighting
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: DIMMER
Setting content: OFF / ON / AUTO
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
ON:
Keep the background illumination of the monitor dark.
AUTO: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
OFF:
Display Setup Operation
To display the Display mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
• When ON or AUTO is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 32).
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Display mode operation has been
released. Engaging the parking brake can reactivate the Display
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To display the Display mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Display mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
35-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 36 Wednesday, December 1, 2004 4:20 AM
Adjusting the Minimum Level of Backlight
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: DIMMER LOW LEVEL
Setting content: -15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Switching Background Textures
You have a choice of background textures you can set.
Setting item: BACKGROUND
Setting content: MODE1 / MODE2
• This operation can be carried out after removing the disc from the
unit or when playback of the disc has stopped.
• Wallpapers downloaded from “Downloading the MY
BACKGROUND data” (page 44) are recalled.
• When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
• When an error message is displayed (ERROR, HI-TEMP, etc.),
background textures selected by this setting cannot be displayed on
the unit.
Setting Automatic Background Textures
Turning the Touch Panel Vibration ON or
OFF
You can turn the touch panel’s vibration ON or OFF during operation.
Setting item: PULSETOUCH
Setting content: OFF / ON
OFF:
ON:
Turns off vibration during operation.
Turns on vibration during operation.
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content:
/ RESET
1 Touch [
] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the
mark, touch
[RESET] to restore the adjustment screen to the initial setting.
• If you touch [RETURN] on the adjustment screen, no adjustment is
done and the DISPLAY setup screen is restored.
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1
MODE2
OFF: Turn off the Auto Background Texture Scroll mode.
ON:
• Wallpapers downloaded from “Downloading the MY
BACKGROUND data” (page 44) are recalled.
Setting the Font Type
You can choose a character (text and tag information, etc.) font type for
the main display.
Setting item: FONT TYPE
Setting content: FONT 1 / FONT 2
FONT1: Selects bold characters.
FONT2: Selects round characters.
Switching the Font Back Display Color
You can choose from 5 different display colors for the font back (source
title, shortcut display, etc.).
Setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
36-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 37 Wednesday, December 1, 2004 4:20 AM
(DVD MUSIC)
i-Personalize™
Media Xpander Function
This disk contains a large quantity of data such as a music
clip. MX uses this data to reproduce the sound accurately.
MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
6
Setting the MX mode
To display the i-Personalize mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
Touch [RETURN] to return to the previous screen.
• When OFF is selected, MX effect of each MX mode will be off.
• Each music source, such as radio, CD and MP3 can have its own MX
setting.
• AUX is displayed when ON is selected in “Setting the AUX Mode”
(page 34).
• MX mode does not function for AM radio, NAV. mode when MX is
ON.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD, iPod.
• If the unit is connected to an audio processor with the MX function,
such as PXA-H700, etc., the MX processing can be applied to the
audio processor. In this case the audio processor needs to be
adjusted. For details, refer to the Owner’s Manual of the audio
processor.
• This function is inoperable when Defeat is set to ON.
• The MX setting function is applied for Pre-out output.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the i-Personalize mode operation has
been released. Engaging the parking brake can reactivate the iPersonalize mode, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above procedure (1
through 3), of “To display the i-Personalize mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the i-Personalize mode screen.”
Bass Engine Function
Setting the Bass Engine
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The radio, CD, and MP3, will be able to
reproduce the music clearly even in cars with a lot of road noise.
1
Touch [SETUP] on the source main screen.
The SETUP selection screen is displayed.
2
3
Touch [OFF] or [ON] of MEDIA XPANDER to turn MX
ON or OFF.
3
After setting to ON, touch [
].
Touch [ ] or [ ] of the desired MX mode.
The level of the audio source can be adjusted.
MX CD (OFF, CD MX 1 to 3)
The large quantity of uncompressed CD data is processed to
reproduce the sound with more clarity.
MX COMPRESS MEDIA (OFF, CMPM MX 1 to 3) / MX SAT (OFF,
SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
Touch [SETUP] on the source main screen.
The SETUP selection screen is displayed.
2
The screen changes to the Media Xpander setting screen.
5
1
The screen changes to the i-Personalize.
Touch [i-Personalize].
OFF: MX mode is canceled for all music sources.
ON: The selected MX mode is turned on.
4
The following steps 1 to 6 are common operations to each
“Setting item” of bass engine Setup. Refer to each section for
details.
Touch [i-Personalize].
The i-Personalize screen appears.
Touch [
] of BASS ENGINE.
The screen changes to the Bass Engine setting screen.
4
Touch [ ], [ ] or [
setting item.
] of the desired Bass Engine
Setting items
BASS MAX EQ / P-EQ / BASS FOCUS / T.CORR
(TIME CORRECTION) / X-OVER / SUBWOOFER
5
Touch [ ], [ ] or the adjusted screen of the
selected setting item, and change the setting.
• When setting is complete, storing in memory is recommended.
6
Touch [RETURN].
The screen returns to the previous one.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
37-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 38 Wednesday, December 1, 2004 4:20 AM
Selecting Bass Max EQ mode (Maker’s
setting)
Adjusting the Level
Touch [ ] or [ ], and adjust the selected band level.
Level: -12 ~ +12
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting item: BASS MAX EQ
Setting contents: FLAT / ROCK / POPS / JAZZ / ELECTRIC /
HIPHOP / EASY / COUNTRY / CLASSIC /
NEWS / CUSTOM *
* Contents that are adjusted in parametric EQ.
Adjusting and Storing/Recalling the
Parametric EQ
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s center frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
Setting item: P-EQ
1 Touch [
] of P-EQ.
The screen changes to the P-EQ screen to be adjusted.
2 Adjust the desired band.
P-EQ adjustment screen example
Selecting the Band
The band (BAND1 through BAND4) changes each time
the [BAND] is touched.
The variable range of the active bar and the center
frequency moves according to the band.
BAND1
BAND2
BAND3
BAND4
:
:
:
:
LOW
MID-LOW
MID-HIGH
HIGH
• Touching outside the range for a selected band will move the active
bar to a band where the touched position can be adjusted.
Setting the Bandwidth
The bandwidth changes each time [Q] is touched.
HIGH
:
MID-HIGH :
MID-LOW :
LOW
:
1.0 (Bandwidth setting for HIGH is not available.)
1.0, 2.0, 3.0
1.0, 1.5, 2.0
1.0, 2.0, 3.0
Adjusting the Level/Frequency Directly
Move to a desired position by touching the active point and change the
setting contents. Or, move the active point to the desired position by
touching where you wish to move it.
• If you set the parametric EQ, BASS MAX EQ setting content is set to
“CUSTOM.”
3 Touch [RETURN] to return to the previous screen.
Storing Adjusted Contents
The following operation is performed after Step 3 above.
Displays the band currently selected
Displays the center frequency of the band currently
selected
Displays the band level currently selected
Displays the bandwidth (Q) of the band currently
selected
Variable range of center frequency of the band currently
selected
Active point: displays the center frequency and level
position of the band currently selected
Active bar: displayed the variable range of the band
level currently selected with an orange bar
Adjusting the Frequency
Touch [ ] or [ ], and adjust the selected band
frequency.
4 Touch [MEMORY] on the BASS ENGINE screen.
5 Within 5 seconds, touch any one of preset buttons
[P.SET 1] through [P.SET 6].
The adjusted contents are stored on the P.SET number
you touch.
• The stored contents on the P.SET number remain undeleted despite a
following reset operation or disconnection of the battery power cord.
• Adjusted/set contents of each setting item in Bass Engine can be
stored in the preset buttons (1 through 6).
Recalling the Adjusted and Stored Contents
Following operation is performed after Step 3 above.
4 Touch any one of [P.SET 1] to [P.SET 6] on the BASS
ENGINE screen.
Recall the adjusted and stored contents.
• This function is inoperable when Defeat is set to ON.
Center Frequency
HIGH
:
MID-HIGH :
MID-LOW :
LOW
:
10kHz, 12.5kHz, 15kHz
500Hz, 700Hz, 1kHz, 2kHz, 4kHz, 6kHz
100Hz, 150Hz, 200Hz
40Hz, 60Hz, 90Hz
38-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 39 Wednesday, December 1, 2004 4:20 AM
Example 2. Listening Position: All Seats
About the Time Correction
The distance between the listener and the speakers in a car vary widely
due to the special conditions of the mobile environment. This difference
in the distances from the speakers to the listener creates a shift in the
sounds image and frequency characteristics. This is caused by the time
delay between the sound reaching the listener’s right versus left ear.
To correct this, the IVA-D310 is able to delay the audio signal to the
speakers closest to the listener. This effectively creates a perception of
increased distance for those speakers. The listener can be placed at an
equal distance between the left and right speakers for optimum staging.
The adjustment will be made for each speaker in a step of 0.1 ms.
Example 1. Listening Position: Front Left Seat
Adjust the time correction level of the front left speaker to a high
value and the rear right to zero or a low value.
Adjust the time correction level of each speaker to almost the
same level.
1 Sit in the listening position (driver’s seat, etc.) and
measure the distance (in meters) between your head and
the various speakers.
2 Calculate the difference between the distance to the
farthest speaker and the other speakers.
L = (distance to farthest speaker) – (distance to other
speakers)
3 Divide the distances calculated for the speakers by the
speed of sound (343 m/s (765 mph) at 20°C).
These values are the time correction values for the
different speakers.
Adjustment and Storing/Recalling of Time
Correction
Before performing the following procedures, refer to “About the Time
Correction” (page 39).
Setting item: T.CORR (TIME CORRECTION)
Setting contents: 0.0 - 9.9
5.1ms
0.5m
2.25m
∗
∗
1 Touch [
] of T.CORR.
The screen changes to the T-CORR. setup screen.
2 Touch [ ] or [ ] of the desired speaker to adjust the time
correction value (0.0 to 9.9).
3 Repeat Step 2 above to set another speaker.
4 Touch [RETURN] to return to the previous screen.
• The setting contents which have been set in “Time Correction” are
applied for the Bass Focus mode.
Tips
* Subwoofer speaker
You cannot change the time correction value for the subwoofer,
but you can set the subwoofer’s apparent position to the front by
adjusting the time correction value of the front and rear
speakers.
For details, refer to the “Tips” on page 41.
Here we calculate the time correction value for the front left
speaker in the diagram above.
Conditions:
Farthest Speaker – listening position: 2.25 m (88-9/16")
Front left speaker – listening position: 0.5 m (19-11/16")
Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")
Time correction = 1.75 ÷ 343** × 1000 = 5.1 (ms)
** Speed of sound: 343 m/s (765 mph) at 20°C
The sound is not balanced because the distance between the
listening position and the various speakers is different.
The difference in distance between the front left speaker and the
rear right speaker is 1.75 m (68-7/8").
Time correction eliminates the differences in the time required for
the sound to reach the listening position.
The time of the front left speaker is corrected by 5.1 ms so that
its sound reaches the listening position at the same time as the
sound of other speakers.
• The time correction adjusting function can be applied for Pre-out
output.
Storing the Adjusted Contents
The storing/recalling of time correction operation is performed after
Step 4 above.
5 Touch [MEMORY] on the BASS ENGINE screen.
6 Within 5 seconds, touch any one of preset buttons
[P.SET 1] through [P.SET 6].
The adjusted contents will be stored on the preset
number you touch.
• The stored contents on the P.SET number remain undeleted despite a
reset operation or disconnection of the battery power cord.
• Adjusted/set contents of each setting item in Bass Engine can be
stored in the preset buttons (1 through 6).
Recalling the Stored Time Correction Setting
The storing/recalling of time correction operation is performed after
Step 4 above.
5 Touch any one of [P.SET 1] to [P.SET 6] on the BASS
ENGINE screen.
The stored adjusting contents will be recalled.
In other words, giving the front left speaker a time correction
value of 5.1 ms makes it seem as if the distance to the front left
speaker is the same as the distance to the farthest speaker.
39-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 40 Wednesday, December 1, 2004 4:20 AM
Adjusting and Storing/Recalling the Bass
Focus
The time difference between the front-rear/left-right speakers, can be
adjusted at the same time. With an initial delay of 0.1 ms for each of the
0 to 99 steps, audible time correction can be done.
Time Difference Table
Number
Time
Number
Time
of
Difference Distance cm (inch)
of
Difference Distance cm (inch)
Steps
(ms)
Steps
(ms)
0
0.0
0.0
51
5.1
174.9 (68-7/8")
1
0.1
3.4 (1-3/8")
52
5.2
178.4 (70-1/4")
2
0.2
6.9 (2-3/4")
53
5.3
181.8 (71-9/16")
3
0.3
10.3 (4-1/16")
54
5.4
185.2 (72-7/8")
4
0.4
13.7 (5-3/8")
55
5.5
188.7 (74-1/4")
5
0.5
17.2 (6-13/16")
56
5.6
192.1 (75-5/8")
6
0.6
20.6 (8-1/8")
57
5.7
195.5 (77")
7
0.7
24.0 (9-7/16")
58
5.8
198.9 (78-5/16")
8
0.8
27.4 (10-13/16")
59
5.9
202.4 (79-11/16")
9
0.9
30.9 (12-3/16")
60
6.0
205.8 (81")
10
1.0
34.3 (13-1/2")
61
6.1
209.2 (82-3/8")
11
1.1
37.7 (14-13/16")
62
6.2
212.7 (83-3/4")
12
1.2
41.2 (16-1/4")
63
6.3
216.1 (85-1/16")
13
1.3
44.6 (17-9/16")
64
6.4
219.5 (86-3/8")
14
1.4
48.0 (18-7/8")
65
6.5
223.0 (87-3/4")
15
1.5
51.5 (20-1/4")
66
6.6
226.4 (89-1/8")
16
1.6
54.9 (21-5/8")
67
6.7
229.8 (90-1/2")
Storing Adjusted Contents
17
1.7
58.3 (22-15/16")
68
6.8
233.2 (91-13/16")
The following operation is performed after Step 4 above.
18
1.8
61.7 (24-1/4")
69
6.9
236.7 (93-3/16")
19
1.9
65.2 (25-5/8")
70
7.0
240.1 (94-1/2")
20
2.0
68.6 (27")
71
7.1
243.5 (95-7/8")
21
2.1
72.0 (28-3/8")
72
7.2
247.0 (97-1/4")
22
2.2
75.5 (29-11/16")
73
7.3
250.4 (98-9/16")
23
2.3
78.9 (31-1/16")
74
7.4
253.8 (99-7/8")
24
2.4
82.3 (32-3/8")
75
7.5
257.3 (101-1/4")
260.7 (102-5/8")
Setting item: BASS FOCUS
Setting contents: 0-99
1 Touch [
] of BASS FOCUS.
The screen changes to the BASS FOCUS setup screen.
2 Set the delay number in the front and rear as well as on
the right and left by touching either button [ ] or [ ] of
the front, rear, right and left speakers.
3 Repeat the Step 2 above to set another channel
(speaker).
4 Touch [RETURN] to return to the previous screen.
• Any manual time correction adjustments will also affect corrections
made for bass focus.
5 Touch [MEMORY] on the BASS ENGINE screen.
6 Within 5 seconds, touch any one of preset buttons
[P.SET 1] through [P.SET 6].
The adjusted contents are stored on the P.SET number
you touch.
• The stored contents on the P.SET number remain undeleted despite a
following reset operation or disconnection of the battery power cord.
• Adjusted/set contents of each setting item in Bass Engine can be
stored in the preset buttons (1 through 6).
Recalling the Adjusted and Stored Contents
Following operation is performed after Step 4 above.
5 Touch any one of [P.SET 1] to [P.SET 6] on the BASS
ENGINE screen.
Recall the adjusted and stored contents.
25
2.5
85.8 (33-3/4")
76
7.6
26
2.6
89.2 (35-1/8")
77
7.7
264.1 (104")
27
2.7
92.6 (36-7/16")
78
7.8
267.5 (105-5/16")
28
2.8
96.0 (37-3/4")
79
7.9
271.0 (106-11/16")
29
2.9
99.5 (39-13/16")
80
8.0
274.4 (108-1/16")
30
3.0
102.9 (40-1/2")
81
8.1
277.8 (109-3/8")
31
3.1
106.3 (41-7/8")
82
8.2
281.3 (110-3/4")
32
3.2
109.8 (43-1/4")
83
8.3
284.7 (112-1/16")
33
3.3
113.2 (44-9/16")
84
8.4
288.1 (113-1/16")
34
3.4
116.6 (45-7/8")
85
8.5
291.6 (114-3/4")
35
3.5
120.1 (47-5/16")
86
8.6
295.0 (116-1/8")
36
3.6
123.5 (48-5/8")
87
8.7
298.4 (117-1/2")
37
3.7
126.9 (49-15/16")
88
8.8
301.8 (118-13/16")
38
3.8
130.3 (51-5/16")
89
8.9
305.3 (120-3/16")
39
3.9
133.8 (52-11/16")
90
9.0
308.7 (121-1/2")
40
4.0
137.2 (54")
91
9.1
312.1 (122-7/8")
41
4.1
140.6 (55-3/8")
92
9.2
315.6 (124-1/4")
42
4.2
144.1 (56-3/4")
93
9.3
319.0 (125-9/16")
43
4.3
147.5 (58-1/16")
94
9.4
322.4 (126-7/8")
44
4.4
150.9 (59-3/8")
95
9.5
325.9 (128-5/16")
45
4.5
154.4 (60-3/4")
96
9.6
329.3 (129-5/8")
46
4.6
157.8 (62-1/8")
97
9.7
332.7 (131")
47
4.7
161.2 (63-7/16")
98
9.8
336.1 (132-5/16")
48
4.8
164.6 (64-3/4")
99
9.9
339.6 (133-11/16")
49
4.9
168.1 (66-3/16")
50
5.0
171.5 (67-1/2")
40-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 41 Wednesday, December 1, 2004 4:20 AM
Example of Bass Focus Setting
X-OVER (LPF) adjustment screen example
1 After entering corrections for the front (left and right)
speakers in STEP 15, the time difference is 1.5 ms for
both front-left and front-right speakers.
1.5ms
1.5ms
∗
2 After entering corrections for the left (front and rear)
speakers in STEP 15, the time difference becomes 3.0
ms** for the front left speaker and 1.5 ms for the left rear
speaker.
** Because the time difference was already set to 1.5 ms for the
front left speaker in STEP 1, the additional correction in STEP
15 makes the time difference of the front left speaker 3.0 ms.
Displays the speaker to be adjusted
When adjusting HPF: FRONT/REAR
When adjusting LPF: SUBW.
Displays the selected HP or LP
Displays the cut-off frequency currently selected
Displays the slope range of currently selected HPF or
LPF
Variable range of selected cut-off frequency
Active bar: displays the position of the cut-off frequency
currently selected with an orange bar
Switching between HPF and LPF
HPF/LPF changes each time [HPF/LPF] is touched.
3.0ms
1.5ms
1.5ms
1.5ms
HPF: Outputs all frequencies higher than that selected
according to your preference.
LPF: Outputs all frequencies lower than that selected
according to your preference.
(Only available when using the subwoofer output from
this unit.)
1.5ms
∗
• Except when the HPF and LPF is turned OFF, the subwoofer is in
monaural mode.
Selecting the Cut-Off Frequency
Tips
* Subwoofer speaker
Delay (turn the rotary encoder) the audio signal to the front (left
and right) speakers to make the apparent position of the
subwoofer to be at the front. In doing this, the apparent position
between the front (left and right) speakers and subwoofer will
appear equal to the driver. After performing above, you can
change the positions of left and right speakers by delaying the
time.
Adjustment and Storing/Recalling of the
Built-in Crossover
The High and Low Pass Filters on this unit can be adjusted to suit your
personal taste.
Setting item: X-OVER
1 Touch [
] of X-OVER.
The screen changes to the X-OVER screen to be
adjusted.
2 Adjust the crossover to your preference.
Touch [ ] or [ ], then select the cut-off frequency
(crossover point).
Setting frequency: 80Hz, 120Hz, 160Hz
Adjusting the Slope
Touch [SLOPE], then adjust the HPF or LPF slope.
Setting slope: OFF, -12dB/oct
Adjusting Cut-off Frequency Directly
Touching the variable range of the cut-off frequency moves the cut-off
frequency to the touched position.
3 Touch [RETURN] to return to the Previous screen.
Storing the Adjusted Contents
Following operation is performed after Step 3 above.
4 Touch [MEMORY] on the BASS ENGINE screen.
5 Within 5 seconds, touch any one of preset buttons
[P.SET 1] through [P.SET 6].
The adjusted contents will be stored on the preset
number you touch.
• The stored contents on the P.SET number remain undeleted despite a
reset operation or disconnection of the battery power cord.
• Adjusted/set contents of each setting item in Bass Engine can be
stored in the preset buttons (1 through 6).
41-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 42 Wednesday, December 1, 2004 4:20 AM
Recalling the Stored Adjusting Contents
4 Touch any one of [P.SET 1] to [P.SET 6] on the BASS
ENGINE screen.
The stored adjusting contents will be recalled.
Subwoofer On and Off
Setting item: SUBWOOFER
Setting contents: OFF / 0° / 180°
OFF: Subwoofer output is off.
0°:
Subwoofer output is on, and the phase is 0°.
180°: Subwoofer output is on, and the phase is 180°.
• The setting of “Subwoofer On and Off” can be stored in the preset
buttons (1 through 6).
The following steps 1 to 6 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
Touch [i-Personalize].
Touch [
Adjusting Tint of Picture
BRIGHT
COLOR*
USER MEMORY*
TINT*
CONTRAST
* The setting is available in the visual source mode. (except navigation
screen)
6
Setting item: COLOR
Setting content: -15 ~ +15
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ*
SHARP*
5
Adjusting Color of Picture
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX1 and AUX2 modes.
• Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.
] of VISUAL EQ.
VISUAL EQ screen appears.
4
• When any NIGHT M. to CONTRAST setting item is selected, the
brightness is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 35).
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
The i-Personalize setup screen appears.
3
Adjusting Brightness
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
Visual EQ Setting Operation
2
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
Setting item: BRIGHT
Setting content: -15 ~ +15
VISUAL EQ™
1
Suitable for CGs and animated films.
Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 43).
P-2:
Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 43).
SOFT:
SHARP:
Following operation is performed after Step 3 above.
Change the setting on the selected item by touching
its [ ] or [ ].
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
Setting item: TINT
Setting content: G15 ~ R15
Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX1 and AUX2 modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
Adjusting Image Contrast
Selecting the VISUAL EQ Mode (Maker’s
setting)
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
OFF (FLAT): Initial Setting
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
Setting item: CONTRAST
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
• When any NIGHT M. to CONTRAST setting item is selected, image
contrast is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 35).
42-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 43 Wednesday, December 1, 2004 4:20 AM
Adjusting Picture Quality
The file name of download data shall be “A_U*****.MP3.”
A_U*****.MP3
Setting item: SHARP
Setting content: -15 to +15
Extender (fixed)
Adjustment of picture quality is done in the range of -15 to +15.
“HARD” and “SOFT” appear as the maximum and minimum
values specified.
• Picture quality adjustment can be made only in the navigation, DVD,
Video CD, AUX1 and AUX2 modes.
• Picture quality adjustment cannot be made if a Navigation system
with the RGB feature is connected.
Storing VISUAL EQ
You can store the settings made for “Adjusting Image Brightness, Tint,
Depth, Picture Quality and Contrast.”
Setting item: USER MEMORY
Setting content: P-1 / P-2
1 After completing “Adjusting Brightness, Tint, Depth,
Picture Quality, and Contrast” (page 42), touch [ ] or
[ ] of USER MEMORY and then select preset No. [P-1]
or [P-2] to which the settings are to be stored.
2 After selecting a preset No., touch [WRITE].
The adjusted VISUAL EQ mode is stored by the above
operations.
• You can recall the VISUAL EQ mode stored here from P-1 or P-2 of
“Selecting the VISUAL EQ Mode (Maker’s setting)” (page 42).
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a file
name once it has been created. Malfunction may result.
• For details about procedures of download, see ALPINE’s Web site.
• If a external audio processor is connected, data that is downloaded
cannot be used.
Data Downloading
1
Insert the CD-R/CD-RW disc containing the data.
• If the optional HDA-5460 is connected, steps 2 to 7 can be performed
after the data has downloaded removable hard disc. The MM
DRIVER main source screen can then be selected on this unit.
• If audio data is contained in a CD-R/CD-RW, set to “MP3” in
“Playing MP3/WMA Data” (page 32).
2
Touch [SETUP].
The SETUP selection screen appears.
Data Download
3
Touch [i-Personalize].
The i-Personalize screen appears.
About SOUND SETUP/BACKGROUND
Download
4
5
Touch [
] of DATA DOWNLOAD.
Touch [
] of SOUND SETUP.
The unit starts searching the disc for data. When the data
search has completed, the Data Download file selection
screen is displayed.
You can download data (from Alpine’s website) to a CD-R/CD-RW
(data is written in the root folder) or HDD*1, and store the data to the
IVA-D310.
To start SOUND SETUP/BACKGROUND download, access the URL
below and follow the on-screen instructions.
• If a file is not found by the data search, “NO FILE” is indicated.
http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au
Data downloading starts.
When data has been successfully downloaded, the
confirmation screen is displayed for 5 seconds, and the
screen returns to the file selection screen.
*1 When the optional HDA-5460 is connected, only SOUND SETUP is
applied.
Downloadable data
Parametric
equalizer
Data is memorized in Preset 6 of the
Parametric EQ Mode.
Time correction
Data is memorized in Preset 6 of the Time
Correction Mode.
Crossover
Data is memorized in Preset 6 of the
crossover mode.
Subwoofer
Subwoofer phase setting is memorized in
Preset 6.
6
Touch [
] of file which is to be downloaded.
PARAMETRIC EQ data
The data is memorized in Preset 6 of Parametric EQ mode. The
memorized data settings in Preset 6 (Parametric EQ mode) are
automatically applied.
X-OVER (Crossover) data
The data is memorized in Preset 6 of X-OVER mode. The
memorized data settings in Preset 6 (X-OVER mode) are
automatically applied.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction mode.
The memorized data settings in Preset 6 (Time Correction
mode) are automatically applied.
Subwoofer data
The data is memorized in preset 6 of the Subwoofer mode. The
memorized data settings in preset 6 (Subwoofer) are auto
matically applied.
43-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 44 Wednesday, December 1, 2004 4:20 AM
7
Touch [RETURN] to return to the previous screen.
AMP status screen display example
Touch [CONTROL] to return to the main source screen
which was previously set.
• When you download the data again, the data is overwritten in
Preset 6.
Downloading the MY BACKGROUND data
1
Insert the CD-R/CD-RW disc containing the data you
need.
After sensing the disc, the DATA DOWNLOAD screen is
displayed.
2
Turns pages
Temperature (°F)
Voltage (V)
Lights up when FAN is activated
Selected AMP Setup screen appears.
Touch [ ] or [ ] of MY BACKGROUND, then select
USERS1 or USERS2.
The selected wallpaper can be changed.
3
Touch [
] of MY BACKGROUND.
Data search of the disc starts. After completing the data
search, the file selection screen of Data Download is
displayed.
4
5
Touch [ ] or [ ] to select the desired file name.
3
The screen changes to the AMP SETUP screen of the
selected AMP.
4
INPUT GAIN (monaural amplifier connected),
INPUT GAIN CH1/2, CH3/4 (4CH amplifier
connected)
Setting contents: 0.1V to 8V (monaural amplifier connected)
0.2V to 4V (4CH amplifier connected)
Setting mode:
Touching [RETURN] returns to the previous screen.
Touching [CONTROL] returns to the earlier main source
screen.
• If data is newly downloaded, the data overwrites the previous data.
• If the battery power cable is removed, the downloaded data is
memorized.
• You can recall a wallpaper in “Switching Background Textures”
(page 36), or “Setting Automatic Background Textures” (page 36).
• When download has completed, remove the disc.
Setting AMP Link (Optional)
Recalling the Display of the External
Amplifier Setting and Status (Option)
When an external amplifier (MRV-F545, MRV-F345, MRD-M1005,
MRD-M605) is connected, you can set it from this unit. Up to eight
amplifiers can be set.
• If amplifier settings are made on the unit, do not then change the
setting with the amplifier buttons, as the amplifier display may not
match the operation of the unit.
• To make the setting, set to “Setting the VISUAL Touch Button” (page
34).
1
Set the desired setting mode by touching [ ] or [ ].
Setting mode:
AMP DISPLAY
Setting contents: TEMP.(C)/TEMP.(F)/VOLT./SCAN
Displays the indication you set on the connected amplifier.
Touch [MEMORY].
Data download starts.
When data downloading has completed correctly, the
screen returns to the DATA DOWNLOAD screen.
6
Touch [SETUP] on the AMP status screen.
5
6
To set another amplifier, touch [RETURN], and
repeat steps 3 and 4.
To cancel the AMP status screen, touch [VISUAL].
The VISUAL screen appears.
7
Touch [NORMAL].
The screen returns to the normal screen.
AMP Link Lock Function
This setting has a function that prevents accidental adjustment of the
INPUT GAIN in order to prevent speaker damage.
1
Touch and hold [RETURN] for at least 3 seconds on
the AMP SETUP screen.
The LOCK mode is turned on, and the setting mode for
INPUT GAIN becomes inactive when the AMP SETUP
screen is displayed, and “LOCK” is displayed in the setting
content next time.
To be functional the setting mode for INPUT GAIN, the
LOCK mode is canceled by touching and holding
[RETURN] for at least 3 seconds on the AMP SETUP screen.
Touch [VISUAL] on the main source screen.
The VISUAL selection screen appears.
2
Touch [AMP STATUS].
The AMP status screen is displayed.
44-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 45 Wednesday, December 1, 2004 4:20 AM
External Audio Processor
(Optional)
When an external audio processor is connected to this unit, you can
operate it from this unit. Some audio processors may not be operated.
When PXA-H510 or PXA-H900 is connected, some of the operations
may not be performed from this unit. In this case, operate them in the
connected product. Explanations below is the case when PXA-H700 or
PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
1
Speaker Setup (page 50)
2
Adjusting the speaker levels (page 51)
3
Mixing bass sound to the rear channel
(page 51)
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the MRAD550 is connected. Also, the setting content differs between the PXAH700 and PXA-H701.
To display the Audio processor mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
(Turning the speakers to be used on and off and
setting their response)
(Adjusting the signal output level to the various
speakers)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Audio processor mode operation
has been released. Engaging the parking brake can reactivate
the Audio processor mode, as long as the car's ignition has not
been turned off. It is not necessary to repeat the above
procedure (1 through 3), of “To display the Audio processor
mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Audio processor mode screen.”
4
Adjusting the acoustic image (page 51)
5
Achieving powerful high volume sound
(page 51)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
6
7
Adjusting the DVD Level (page 51)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing Settings in the Memory (page 52)
(Storing all the settings and adjustments made on the
IVA-D310 (not only the above settings/adjusts) in the
memory)
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
45-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 46 Wednesday, December 1, 2004 4:20 AM
Setting the Speakers
1
2
Check that Defeat mode is off (page 23-24).
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
Touch [i-Personalize].
The i-Personalize screen appears.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [
] of SPEAKER SELECT.
The SPEAKER SELECT screen appears.
6
Set the connected speaker by touching the
respective [ ], [ ] or [ON], [OFF] button.
FRONT1:
FRONT2:
REAR:
CENTER:
SUBWOOFER:
7
OFF/FULL (Full Range)/TW (Tweeter)
OFF/ON
OFF/ON
OFF/ON
OFF/MONO/STEREO
Touch [RETURN] to return to the previous screen.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 50).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
2
Check that Defeat mode is off.
Touch [i-Personalize].
MX COMPRESS MEDIA (OFF, CMPM MX 1 to 3) / MX SAT (OFF,
SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disk contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
MX AUX 1 to 3 (OFF, CMPX MX, MOVIE MX, MUSIC MX)
Choose the MX mode (MP3, MUSIC, or MOVIE) that
corresponds to the media connected.
7
Touch [RETURN] to return to the previous screen.
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for AM radio.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD.
X-OVER Adjustment
1
2
Check that Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
4
5
Touch [i-Personalize].
Touch [
] of A.PROCESSOR.
Touch [
] after setting to ON.
The Media Xpander setup screen appears.
Touch [ ] or [ ] of X-OVER to select L/R or L+R.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
Select ON or OFF of MX by touching [ON] or [OFF]
of MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
5
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
The A.PROC list screen appears.
The i-Personalize screen will appear.
4
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
The i-Personalize screen will appear.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
6
6
7
Touch [
] of X-OVER.
Touch [
] of the speaker to be adjusted.
The screen changes to the X-OVER screen to be adjusted.
46-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 47 Wednesday, December 1, 2004 4:20 AM
8
Adjust the crossover to your preference.
X-OVER (LPF) adjustment screen example
9
Touch [RETURN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the X-OVER for that
speaker cannot be set. Refer to “Setting the Speakers” (page 46).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The H.P.F. filter cannot be set to OFF (slope OFF) if Tweeter is
selected for FRONT1 . Or, only the subwoofer is adjustable if
STEREO is selected for the subwoofer.
Performing Time Correction Manually
(TCR)
Displays the speaker (channel) currently selected
Displays the HP or LP selected
Displays the cut-off frequency currently selected
Displays the level of HPF or LPF currently selected
Displays the slope range of HPF or LPF currently
selected
Variable range of selected cut-off frequency
Displays the variable range of the cut-off frequency level
currently selected with an orange bar.
Because of the particular conditions inside the vehicle, there can be
major differences in the distances between the various speakers and the
listening position. It is possible to calculate the optimum correction
values and eliminate the time error at the listening position yourself
using this function.
1
2
Selecting the Cut-Off Frequency
Touch [ ] or [ ], then select the cut-off frequency
(crossover point).
3
The adjustable bandwidth differs depending on the speaker
(channel).
Adjusting the Level
Touch [ ] or [ ], then adjust the HPF or LPF level.
Switching between HPF and LPF
HPF/LPF changes each time [HPF/LPF] is touched.
HPF: Outputs all frequencies higher than that selected
according to your preference.
LPF: Outputs all frequencies lower than that selected
according to your preference.
(Only available when using the subwoofer output from
this unit.)
Adjusting the Slope
Touch [SLOPE], then adjust the HPF or LPF slope.
Adjusting Level/Cut-off Frequency Directly
Touching the variable range of the level/cut-off frequency moves
the level/cut-off frequency to the touched position.
• If [CANCEL] is displayed while LOADING is touched, or an
operation is carried out on the connected audio processor, loading is
stopped and the setting contents (created before stopping) are
displayed.
• Loading time may take longer depending on the setting content. This
is not a malfunction.
Check that Defeat mode is off.
Sit in the listening position (the driver’s seat, for
example) and measure the distance (in meters)
between your head and the various speakers.
Calculate the difference in distance between the
farthest speaker and the other speakers.
L=
4
(distance of farthest speaker)
– (distance of other speakers)
Divide the distances calculated for the different
speakers by the speed of sound (343 m/s
temperature 20°C).
This value is the time correction value for the various
speakers.
Concrete examples
Calculating the time correction value for the front left speaker on
the diagram below.
Conditions:
Distance between farthest speaker and listening position:
2.25 m (88-3/4")
Distance between front left speaker and listening position:
0.5 m (20")
Calculation:
L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4")
Compensation time = 1.75 ÷ 343 x 1000 = 5.1 (ms)
In other words, setting the time correction value for the front left
speaker to 5.1 (ms) sets a virtual distance matching the
distance to the farthest speaker.
47-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 48 Wednesday, December 1, 2004 4:20 AM
Phase Switching
5.1ms
1
2
2.25m
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
0.5m
Make sure that the defeat is turned off (page 23-24).
Touch [i-Personalize].
The i-Personalize screen appears.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen is displayed.
5
The sound is uneven because
the distance between the
listening position and the
different speakers is different.
The difference in the distance
between the front left and rear
right speakers is 1.75 meters
(68-3/4").
5
Time correction eliminates
the difference between the
time required for the sound
from the different speakers to
reach the listening position.
Setting the time correction of
the front left speaker to 5.1
ms makes it possible to
coordinate the distance from
the listening position to the
speaker.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
6
Touch [i-Personalize].
The i-Personalize screen appears.
7
Touch [
8
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
9
6
7
Switch the phase (0° or 180°) by touching [ ] or [ ]
of the desired speaker.
Touch [RETURN] to return to the previous screen.
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and center
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
2
Check that the Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
Touch [i-Personalize].
The i-Personalize screen will appear.
Touch [ ] or [ ] of T.CORR.
Select L/R or L+R.
] of PHASE.
The PHASE adjustment screen appears.
] of A.PROCESSOR.
The A.PROC list screen is displayed.
Touch [
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Select L/R or L+R by touching [ ] or [ ] of G-EQ.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
Touch [
] of T.CORR.
The T.CORR adjustment screen appears.
10 Adjust the time correction value (0.0 ~ 20.0ms) of a
desired speaker by touching the respective [ ] or
[ ] button. (1 step = 0.05ms)
11 Touch [RETURN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 46).
• The adjustment value for FRONT2 (Speakers) which is adjusted in
time correction, is also applied to the front speakers in “Setting Bass
Focus” (page 50).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
When parametric EQ is adjusted, this setting will be turned
off.
6
Touch [
] of G-EQ.
The G-EQ list screen appears.
7
Touch [
] of the desired speaker (channel).
The G-EQ adjustment screen appears.
8
Adjust the G-EQ to your preference.
48-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 49 Wednesday, December 1, 2004 4:20 AM
G-EQ adjustment screen example
3
Touch [i-Personalize].
The i-Personalize screen will appear.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Select L/R or L+R by touching [ ] or [ ] of P-EQ.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
When graphic EQ is adjusted, this setting will be turned off.
Displays the speaker (channel) currently selected
Displays the selected frequency
Displays the frequency level currently selected
Active ber: Displays the variable range of the frequency
level currently selected with an orange bar
Setting variable range
Adjusting the Frequency
6
Touch [
] of P-EQ.
The P-EQ list screen appears.
7
Touch [
] of the desired speaker (channel).
The P-EQ adjustment screen appears.
8
Adjust the P-EQ to your preference.
P-EQ adjustment screen example
Touch [ ] or [ ] to adjust the frequency.
Adjusting the Level
Touch [ ] or [ ] to adjust the level.
Creating the Curve Directly
Touching any position in the setting variable range moves the
active bar to the touched position. Or, touching and creating a
curve in the setting variable range immediately displays the new
curve.
• If [CANCEL] is displayed while LOADING is touched, or an
operation is carried out on the connected audio processor, loading is
stopped and the setting contents (created before stopping) are
displayed.
• Loading time may take longer depending on the setting content. This
is not a malfunction.
9
Touch [RETURN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 46).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
Parametric Equalizer Adjustments
Displays the speaker (channel) currently selected
Displays the currently selected band
Displays the center frequency of the band currently
selected
Displays the band level currently selected
Displays the bandwidth (Q) of the band currently
selected
Variable range of the center frequency of the selected
band
Active point: displays the position of the center
frequency and level of the band currently selected
Active bar: displayed the variable range of the band
level currently selected
Adjusting the Frequency
Touch [ ] or [ ], then adjust the frequency of the
selected band.
Adjusting the Level
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s center frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
1
2
Touch [ ] or [ ], then adjust the level of the selected
band.
Check that Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
49-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 50 Wednesday, December 1, 2004 4:20 AM
Selecting the Band
The band (BAND1 through BAND5) changes each time
[BAND] is touched.
Setting Bass Focus
• Touching outside the variable range for a selected band moves the
active bar to a band where the touched position can be adjusted.
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rear/left-right speakers.
Namely, it enables a time correction based on your preference. With an
initial delay of 0.05 ms for each of the 0 to 400 steps, audible time
correction can be achieved.
Setting the Bandwidth
6
The active bar and the variable range of the center
frequency move according to the band.
The bandwidth changes each time [Q] is touched.
Adjusting the Level/Frequency Directly
Move to a desired position by touching the active point and
change the setting contents. Or, move the active point to the
desired position by touching where you wish to move it.
• Downloading is stopped, and the setting contents (created before
stopping by touching [CANCEL] in the display during the download,
or operating the connected audio processor) are displayed.
• Loading time may take longer depending on the setting content. This
is not a malfunction.
9
Touch [RETURN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 46).
• It is not possible to adjust the frequencies of adjacent bands within 7
steps.
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
• Any setting in Bass Focus is applied in time correction, too.
• Touch [RETURN] to return to the previous screen.
Speaker Setup
The PXA-H700 or PXA-H701 can be set according to the playable
frequency range of your speakers.
Check the playable frequency range of the speakers (not including the
subwoofer) before performing this operation to verify whether the
speakers can play low frequencies (of about 80 Hz or less).
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if Decode mode is switched.
1
2
1
2
3
3
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [
] of SPEAKER SETUP.
The adjusting screen of SPEAKER SETUP appears.
6
Select the speaker characteristic by touching [ ],
[ ] or [ON], [OFF] of the desired speaker setting.
Touch [i-Personalize].
OFF*1:
SMALL:
Touch [
] of A.PROCESSOR.
Touch [
] of BASS SOUND CONT.
The Bass Sound Cont. screen appears.
Setting Bass Compressor
You can adjust the sound of low frequencies as desired.
6
Touch [i-Personalize].
The SETUP selection screen is displayed.
Touch [SETUP] on the main source screen.
The A.PROC list is displayed.
5
Touch [SETUP] on the main source screen.
The i-Personalize screen will appear.
Make sure that the defeat is turned off (page 23-24).
The i-Personalize screen appears.
4
Check that Defeat mode is off.
The SETUP selection screen appears.
4
Setting Bass Sound Control
Set the delay number in the front and rear, and on
the right and left of the desired speaker by touching
the respective [ ] or [ ] button.
Touch [ ] or [ ] of BASS COMP. to select the
desired mode.
Bass sound is emphasized more as the mode is
sequentially switched as MODE1
2
3, offering you
vivid low frequencies.
Select OFF when the setting is not necessary.
Touch [RETURN] to return to the previous screen.
When no speaker is connected.
When a speaker that cannot play low frequencies
(80 Hz or less) is connected.
LARGE*2: When a speaker that can play low frequencies (80
Hz or less) is connected.
*1 It is not possible to set the front speakers to “OFF”.
*2 If the front speakers are set to “SMALL”, the rear and
center speakers cannot be set to “LARGE”.
• If the center speaker is turned “OFF,” the center channel’s audio
signals are added to the audio signals output from the front speakers.
• If you set the speaker response to “OFF,” also set the speaker setting
to “OFF.” (page 46)
• Perform the setup for all the speakers (“Front,” “Center,” “Rear”
and “Subwoofer”). If not, the sound may not be balanced.
• When center is set to “OFF”, the setting is ineffective even if center
is set with this function.
• Through changing the settings on each speaker, a change in the
output of the other speakers may occur due to the setting
requirements.
• When using the PRO LOGIC II, if the rear speaker is set to
“LARGE”, then there will be no output from the subwoofer.
50-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 51 Wednesday, December 1, 2004 4:20 AM
Achieving powerful high volume sound
Setting of Dolby 5.1ch
1
2
Check that Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
4
Touch [i-Personalize].
Touch [
The i-Personalize screen will appear.
STD: For powerful sound at regular volume levels
MAX: For powerful sound at high volumes
Touch [
Touch [
] or [
] of LISTENING MODE to select STD or MAX.
] of A.PROCESSOR.
The A.PROC list screen appears.
5
With Dolby Digital, the dynamic range is compressed so that powerful
sound can be achieved at regular volume levels. This compression can
be canceled to achieve an energetic sound with even greater power, like
the sound in a movie theater.
This function works only in the Dolby Digital mode.
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
] of DOLBY 5.1 CH SETUP.
Adjusting the speaker levels
The DOLBY 5.1CH SETUP display appears.
Set the items below as you desire.
Adjusting the acoustic image
In most installations, the center speaker must be placed directly between
the front passenger and driver. Using this function, the center channel
information is distributed to the left and right speakers. This creates an
acoustic image simulating a center speaker directly in front of each
listener. Adjusting the center width in PL II MUSIC (see “Using the Pro
Logic II Mode,” page 52), makes this function ineffective.
The test tones help to make the volume adjustments of the different
speakers. When levels are equal, a strong sense of presence can be heard
from the different speakers at the listening position.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the decode mode is switched.
1 Touch [ON] of OUTPUT LEVEL.
Test tone output is repeated for each of the different
speaker channels. They will be repeated in the order
shown below.
If no operation is performed for 2 seconds, the channel
switches to the next channel.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
Left
Center
Left surround
Touch [ ] or [ ] of BI-PHANTOM to adjust the level.
The level can be adjusted within the range of -5 to +5. The
higher the level, the more the position of the center speaker is
shifted to the sides.
The BI-PHANTOM function is turned off by touching [OFF].
This function mixes the front channel audio signals to the audio signals
output from the rear speakers, improving the sound in the vehicle’s rear
seat.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
Touch [ ] or [ ] of REAR MIX to adjust the level.
The level can adjusted in five steps: -6, -3, 0, +3 and +6. The
higher the level, the more bass is output from the rear speakers.
(The effect differs according to the software (DVD, etc.).)
The REAR MIX function is turned off by touching [OFF].
• This adjustment is ineffective when the rear speaker setup setting is
set to “OFF.”
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
Right Surround
2 While the test tone is being produced from the speakers,
touch [ ] or [ ] of OUTPUT LEVEL balance the output
from all the speakers.
• The adjustment range for the different speakers is
–10 dB - +10 dB.
• Adjust based on the front speakers.
• This adjustment is effective when the setting of the center speaker to
SMALL or LARGE in the speaker setup settings.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 46).
Mixing bass sound to the rear channel
Right
Left
• If a speaker is set to off mode, that speaker’s level adjustment cannot
be made.
Refer to “Speaker Setup” (page 50).
Adjusting the DVD Level
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
1
2
Check that Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
Touch [i-Personalize].
The i-Personalize screen will appear.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [
] of DVD LEVEL.
The DVD LEVEL list screen appears.
51-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 52 Wednesday, December 1, 2004 4:20 AM
6
Adjust the level by touching [ ] or [ ] of the
desired adjusting mode.
Using the Pro Logic II Mode
The level can be adjusted in the range of –5 to +5.
Storing Settings in the Memory
Adjustment or setting contents can be stored.
Contents that can be stored vary depends on the audio processor used.
1
2
3
Check that Defeat mode is off (page 23-24).
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a “REAR
FILL” function for outputting the signals of the front channel to the rear
channel.
1
2
The setting contents are stored.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
Touch [MEMORY] on the A.PROC list display.
Within 5 seconds, touch any one of the preset
buttons [P.SET 1] through [P.SET 6] on the
A.PROC list screen.
Check that Defeat mode is off.
3
Touch [i-Personalize].
The i-Personalize screen will appear.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
• The stored contents will not be deleted even when the battery power
cord is detached.
5
Touch [
] of DOLBY PLII.
The DOLBY PLII adjusting screen appears.
Getting out the Preset Memory
1
2
Check that Defeat mode is off.
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] on the A.PROC list display to
select the preset memory.
• It takes a few moment to get out the preset memory.
6
Touch [ ] or [ ] of DOLBY PLII to select the
desired mode.
PL II MOVIE: Suits the stereo TV shows and all programs
encoded in Dolby Surround. It improves the
sound field directivity to near that of discrete
5.1-channel sound.
PL II MUSIC: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
REAR FILL: Depending on the input signals, the sound may
only be output from the front speakers. In this
case, the “REAR FILL” function can be used to
output signals from the rear speakers as well.
OFF:
Turns DOLBY PL II function to OFF.
If PL II MUSIC is selected, the center width can be adjusted with
following operations.
This function offers the optimum vocal position by adjusting the
center channel position between the center speaker and the L/R
speaker. (The adjustments established in “Adjusting the
acoustic image” (page 51) are ineffective while this function is
activated.)
Touch [ ] or [ ] of CENTER WIDTH CONT to adjust the
level.
The level can be adjusted between 0 to 7. When the level
increases, the center channel position moves from the
center speaker position to both sides.
Touch [OFF] of CENTER WIDTH CONT to turn off the
center width control.
• This adjustment is effective when the setting of the center speaker is
SMALL or LARGE in the speaker setup settings.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 46).
• This function only works with two-channel signals. This operation is
ineffective when 5.1-channel DTS or Dolby Digital signals are input.
• If the setting of REAR FILL is made when REAR MIX is ON, sound is
unchanged in the rear fill setting because REAR MIX is given priority
during 2 channel decoder other than linear PCM.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• Touching [RETURN] will return to the previous screen.
52-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 53 Wednesday, December 1, 2004 4:20 AM
Linear PCM Setting
Navigation System
(Optional)
The output when playing discs recorded in linear PCM can be set to 2 or
3 channels.
1
2
Check that Defeat mode is off.
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3
Touch [i-Personalize].
The i-Personalize screen will appear.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [ ] or [ ] of PCM MODE to select 2 CH or 3
CH.
2CH: 2ch output (L/R)
3CH: 3ch output (L/R/CENTER)
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 46).
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the IVA-D310,
the Navigation screen can be displayed on this unit.
1
Touch [SOURCE] on the main source screen.
The source screen appears on the display.
2
Touch [NAV].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner’s Manual of the
navigator.
• While the Navigation selection mode is being selected in “Setting the
VISUAL Touch Button” (page 34), the navigation mode will be
directly activated.
• If the Navigation mode menu is not displayed on the main menu
screen, set NAV. IN to on by following “Setting the Navigation
Mode” (page 33).
• When the Navigation System is on, the audio and visual navigation
cuts in.
• For operation, if a navigation system with touch panel operation is
connected, refer to the Owner's Manual of the navigation system.
53-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 54 Wednesday, December 1, 2004 4:20 AM
Auxiliary Device
(Optional)
Changer
(Optional)
Operating Auxiliary Devices (Optional)
Controlling CD Changer (Optional)
To operate your devices connected to the AUX terminals on the rear
panel of IVA-D310, follow the procedure described below.
An optional 6-disc or 12-disc CD Changer may be connected to the
IVA-D310 if it is Ai-NET compatible. With a CD Changer connected to
the Ai-NET input of the IVA-D310, the CD Changer will be
controllable from the IVA-D310.
If you connect a changer compatible with MP3, you can play CDROMs, CD-Rs, and CD-RWs containing MP3 files on the IVA-D310.
WARNING
It is dangerous (and illegal in many states) for the driver to
watch the TV/Video while driving the vehicle. The driver may
be distracted from looking ahead and an accident could
occur.
Install the IVA-D310 correctly so that the driver cannot watch
TV/Video unless the vehicle is stopped and the emergency
brake is applied.
If the IVA-D310 is not installed correctly, the driver will be
able to watch the TV/Video while driving the vehicle and may
be distracted from looking ahead and cause an accident.
The driver or other people could be severely injured.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the IVA-D310.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 55).
1
2
Touch [SOURCE] on the main source screen.
Touch [CD CHG].
The display changes to the CD changer mode screen.
When a 6 Disc CD Changer is connected;
1 Touch [P1/2]*.
The Function Guide display appears.
To activate your auxiliary devices:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the AUX mode operation has been
released. Engaging the parking brake can reactivate the AUX
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To activate your auxiliary devices.”
Each time the ignition is turned OFF, perform the procedure of “To
activate your auxiliary devices.”
• If you try to activate the auxiliary device while driving, the
display will show the warning-PICTURE OFF FOR YOUR
SAFETY.
1
Touch [SOURCE] on the main source screen.
The source screen appears on the display.
2
* When an MP3 compatible CD changer or DVD changer is
connected, touch repeatedly until the disc number is displayed.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [P1/3] twice to change the Function Guide display.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Touch [P1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that DISC 7
through DISC 12 represent disc numbers 7 to 12.
• After selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA section.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the IVA-D310 as
well as the CD changer.
Touch [AUX]*.
The external input screen is displayed.
* AUX-1 to AUX-3 are displayed if the external input devices
(maximal 3) are connected, or the name which is given as the source
name in “Naming External Devices” on page 34 is displayed.
• If the AUX mode is not displayed on the main menu, set AUX IN to
ON by following “Setting the AUX Mode” (page 34).
• The display mode changes by touching [WIDE].
For operation, refer to “Switching Display Modes” on page 25.
54-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 55 Wednesday, December 1, 2004 4:20 AM
Multi-Changer Selection (Optional)
HDD Player
Operation
(Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers.
1
2
In changer mode, touch [CHG SEL] or press BAND
on the unit to select the next changer (connected CD
changers only) .
To operate the selected changer, see “CD/MP3/
WMA” section.
• To operate the selected changer, see “CD/MP3/WMA” (pages 15 and
18).
Listening to Music of HDD
This device is controllable from the unit when Alpine HDD player is
connected.
1
Touch [SOURCE] on the main source screen.
The source selection screen appears.
2
Touch [MM DRIVER].
The MM DRIVER mode main screen appears.
3
Select the desired music by touching [
[
].
Searching: Touch [
] or [
].
Fast-forward/reverse: Touch and hold [
4
] or
] or [
].
Touch [ / ] to temporarily stop the music
currently playing.
Touch [
/
] again to resume the play.
55-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 56 Wednesday, December 1, 2004 4:20 AM
SAT Radio Receiver
(Optional)
When an optional XM or SIRIUS Receiver Box is connected
via the Ai-NET bus, the following operations may be
performed. However, the XM Receiver and SIRIUS Receiver
cannot be connected at the same time.
Receiving Channels with the SAT
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
to 100 digital channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-coast via satellite.
For more information, visit XM’s website at www.xmradio.com., and
SIRIUS’ website at www.sirius.com.
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-Net Interface Adapter will
be required. For details, consult you nearest ALPINE dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the IVA-D310 are operative only when
a SAT Receiver is connected.
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2
Touch [XM] or [SIRIUS].
The XM or SIRIUS main screen display appears.
3
Touch [BAND] to select the desired band.
XM radio:
XM-1
XM-2
SIRIUS radio:
SIRIUS-1
4
XM-3
XM-1
The first channel of the selected category is tuned.
• If the desired category program is not found, the selected category is
displayed for 5 seconds, then the receiving program is restored.
Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text information as explained below.
Touch [INFO.] on the XM or SIRIUS mode main screen.
Each time you touch this button, the display changes as shown
below.
*1 Channel number, category, title name, etc., are displayed in one
screen.
*2 XM mode only: The information display appears when ON is set in
“Setting the Auxiliary Data Field Display” (page 32).
• Auxiliary Data Field is not displayed in the dual screen.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
XM Radio:
SIRIUS-2
SIRIUS-3
SIRIUS-1
Touch [NO./NAME] to select the channel number
tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning
channel name tuning
5
You can listen to programs categorized to the same group one after
another.
In the XM or SIRIUS mode, touch [ CAT DN] or [CAT
UP ] to select a desired category.
SAT Receiver: XM or SIRIUS Receiver
1
Tuning in to Categorized Programs
Touch [ CH NO.] / [CH NO. ] or [ CH NAME]
or [CH NAME ] to select the desired channel.
Holding either button down will change channels
continuously.
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
It can also be displayed on the screen of the IVA-D310 in the following
way.
1
2
3
While receiving SAT Radio, touch [
[CH NO. ] to select channel ‘0.’
CH NO.] or
The unit displays the ID number.
To cancel the ID number display, change the
channel.
• You cannot use “O,” “S,” “ I,” or “F” for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
56-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 57 Wednesday, December 1, 2004 4:20 AM
[
Storing Channel Presets
1
Category UP/DOWN can directly be performed.
The list scrolls forwards or backwards by touching the
slide switch and moving it up or down.
Touch [P1/3] after selecting a desired band.
The Function Guide is switched.
2
3
4
Screen example for channel name search list
Touch [MEMORY].
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] within 5 seconds into which you
want to store the channel. The selected channel is
stored.
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or SIRIUS1,
SIRIUS2 and SIRIUS3 ).
The list scrolls one paragraph at a time by touching [ ]
or [ ].
Returns to the category search list.
The selected channel is received.
Changes the category
The selected category on the channel name search
screen is displayed at the top of the search list screen.
The list scrolls forwards or backwards by touching the
slide switch and moving it up or down.
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Receiving Stored Channels
1
Touch [P1/3] after selecting a desired band.
The Function Guide is switched.
2
] is displayed if there is a hierarchical list.
Touch [
] to change the channel name search screen of
the selected category.
2
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has your desired satellite
channel in memory.
Touch [ ] of the selected Category or Channel
name.
The channel in the selected category is tuned.
Selecting the Channel directly
Displaying the Category/Channel Name
Title List
1
In XM or SIRIUS mode, touch [
].
The category title list is displayed.
Screen example for category search list
You can directly select the channel number on the display of the
numeric keypad.
1
Touch [P1/3] twice in the XM or SIRIUS mode.
The function guide appears.
2
Touch [10KEY].
The numeric keypad input screen is displayed.
3
4
Touch to input the channel number.
Touch [ENT].
The selected channel is received.
The list scrolls one paragraph at a time by touching [ ]
or [ ].
Touch [ ] to receive the selected category channel
directly.
57-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 58 Wednesday, December 1, 2004 4:20 AM
iPod™ (Optional)
An iPod™ or iPod™ mini can be controlled from the IVA-D310,
when connected to an optional Alpine Interface Adapter for
iPod™ (KCA-420i). While connected to the IVA-D310, operation
from the iPod™ is no longer possible.
• For details, refer to the Owner’s Manual of the connected adapter
(KCA-420i).
• For each function, refer to the iPod’s documentation.
2
3
2
Touch [iPod].
1 Touch [ ] next to the playlist.
The selected playlist is played back repeatedly.
To search for a song in the playlist
1 Touch [
] of the selected playlist.
The SONG search screen of the selected playlist is
displayed.
2 Touch [ ] next to the desired song.
The selected song is played back.
Searching by artist name
1
Touch [
] or [
] to select the desired song.
Return to the beginning of the current song:
Touch [
].
Fast backward:
Touch and hold [
].
Advance to the beginning of the next song:
Touch [
].
Fast forward:
Touch and hold [
4
Touching [
/
2
/
].
3
• The maximum number of playlists, artists or albums that can be
searched is 511. The maximum number of searches for a song is 255.
Searching by Playlist
] of ARTIST SEARCH.
Select the desired artist.
To play back the artist directly
1 Touch [ ] next to the artist’s name.
Songs by the selected artist are played back.
] of ALL will play back from the beginning of all songs.
] of ALL will change the ALBUM search screen.
To search for the album of an artist
1 Touch [
] of the selected artist.
The ALBUM search screen of the selected artist is
displayed.
2 Touch [ ] next to the desired album’s name.
Songs in the selected album are played back.
• Touching [ ] of ALL will play back the first song of the selected
artist.
• Touching [
] of ALL will change the SONG search screen of the
selected artist.
To search for a song in the album of an artist
1 Touch [
] of the desired album in “To search for the
album of an artist” in step 2.
The SONG search screen of the selected album is
displayed.
2 Touch [ ] next to the desired song’s name.
The selected song is played back.
Searching for a desired Song
An iPod can contain hundreds to thousands of songs. By
keeping these songs organized in smaller playlists, the IVAD310 has the ability to ease song searches.
].
The ARTIST search screen is displayed.
] again will resume playback.
• If a song is playing on the iPod when it is connected to the IVA-D310,
it will continue playing after the connection.
• If using the iPod with a changer, the Versatile Link Terminal (KCA410C) must be used. In this case, touch [CHG SEL] on the iPod mode
main screen to select the changer mode applicable to the iPod.
• Only ISO8859-1 can be displayed.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 64 (64 byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the IVA-D310.
1
Touch [
• Touching [
• Touching [
].
To pause playback, touch [
Touch [
The search mode is activated, and the search list screen
appears.
The display shows the iPod mode screen.
3
Select the desired playlist.
To play back the playlist directly
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
] of PLAYLIST SEARCH.
The PLAYLIST search screen is displayed.
Playback
1
Touch [
Searching by album name
1
Touch [
].
The search mode is activated, and the search list screen
appears.
2
Touch [
] of ALBUM SEARCH.
The ALBUM search screen is displayed.
Touch [
].
The search mode is activated, and the search list screen
appears.
3
Select the desired album name.
58-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 59 Wednesday, December 1, 2004 4:20 AM
To play back the album directly
1 Touch [ ] next to the album’s name.
Songs in the selected album are played back.
• Touching [
] of ALL will play back from the beginning of all songs.
• Touching [
] of ALL will change the SONG search screen.
About Subdisplay
Indications
To search for a song in an album
1 Touch [
] of the selected album name.
The SONG search screen of the selected album is
displayed.
2 Touch [ ] next to the desired song’s name.
The selected song is played back.
Random Play
About Subdisplay Indications
Indication example in the CD mode
Shuffle (M.I.X.)
The Shuffle function of the iPod is displayed as M.I.X. on the IVAD310.
Shuffle Albums:
Select an album randomly in the iPod, and plays back the songs
of the album in sequential order. If a song has been selected in
the playlist/artist search mode before selecting Shuffle Album,
only the albums within the playlist/artist are selected randomly.
The songs of the album are played back sequentially.
Shuffle Songs:
All songs in the iPod are played back in random sequence. If a
song has been selected in the playlist/artist search mode before
selecting Shuffle song, only the songs of the playlist/artist/album
are played back randomly.
1
Touch [
Indicates the track number
Lights up when the simultaneous function is on
Lights up when M.I.X. is active
Lights up when M.I.X. ALL/RPT DISC is on
(only when the changer M.I.X. ALL or RPT DISC mode is
on)
Lights up when RPT is active
Lights up when MUTE is on
Lights up when a disc is inserted
• After displaying the track number, while playing back a disc
compatible with CD text, the track text is displayed (up to 8 digits).
Indication example in the MP3/WMA mode
].
The songs will be played back in random sequence.
M.I.X. ALBUMS
(Shuffle Albums)
2
M.I.X. SONGS
(Shuffle Songs)
To cancel M.I.X. play, touch [
(off)
].
• For details of the search mode, refer to “Searching for a desired
Song” (page 58).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X.), the songs will not play back randomly even when
Shuffle album is selected.
• If there is no album in the playlist, Shuffle (M.I.X.) will not function
even when Shuffle album is selected.
• The M.I.X. mode is canceled when iPod or iPod mini is removed or
the ignition key is turned off.
Repeat Play
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Touch [
Indicates the folder number
Indicates the file number
Lights up when the simultaneous function is on
Lights up when M.I.X. is active
Lights up when RPT DISC is on
(changer mode only)
Lights up when M.I.X. /RPT folder is selected
Lights up when RPT is active
Lights up when MUTE is on
Lights up when a disc is inserted
• After displaying the folder or file number, if there is tag information,
the song name is displayed (up to 8 digits).
Indication example in the DVD mode
].
The file will be played repeatedly.
RPT
(Repeat One)
2
(off)
(Repeat the list being played back)
To cancel repeat play, touch [
].
• During repeat playback, no other songs are selectable by touching
[
] or [
].
• The repeat mode is canceled when iPod or iPod mini is removed or
the ignition key is turned off.
Indicates the chapter number
Lights up when the simultaneous function is on
Lights up when RPT title is on
Lights up when RPT chapter is active
Lights up when MUTE is on
Lights up when a disc is inserted
59-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 60 Wednesday, December 1, 2004 4:20 AM
Indication example in the Video CD mode
Remote Control
Controls on Remote Control
Indicates the track number
Lights up when the simultaneous function is on
Lights up when RPT is active
Lights up when MUTE is on
Lights up when a disc is inserted
• When PBC is turned on, “PBC ON” is displayed.
Indication example in the FM radio mode
Lights up when MUTE is on
Indicates preset number for 2 seconds
Indicates the selected frequency
Lights up when the simultaneous function is on
• Song information, etc., may not be correctly displayed.
• The display may differ depending on the connected device(s).
PWR button
Turns the power ON and OFF.
SRC Button
Selects the audio source.
DN Button
Radio mode: Selects, in descending order, stations
programmed into the radio’s presets.
MP3/WMA mode:
Folder Select (DN) Button selects the folder.
Changer mode:
DISC Select (DN) Button selects a disc in
descending order.
VOLUME
/
Button
Increase or decreases the volume level.
RETURN Button
DVD/Video CD (PBC ON) mode: Returns to the previous
display. (Does not return in some discs.)
button
Radio mode: SEEK (DN) button
CD /Changer mode:
Press the button to go back to the beginning
of the current track. Press and hold to fast
reverse.
MP3/WMA mode:
Press the button to go back to the beginning
of the current file. Press and hold to fast
reverse.
60-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 61 Wednesday, December 1, 2004 4:20 AM
DVD/Video CD: • Move to the desired position on the disc.
• During playback, press and hold for
more than 1 second to reverse the disc
at double speed. Hold for more than 5
seconds to reverse the disc at 8 times
the normal speed.
DVD mode:
• When pressed and held in while in the
pause mode, the disc is played in
reverse slow motion at 1/8th the normal
speed. When held in for 5 more
seconds, the reverse slow motion speed
switches to 1/2 the normal speed.
• The picture is reversed by one frame
each time the button is pressed in the
pause mode.
/
Button
Radio mode: Chooses the tuning mode.
By pressing it more than 2 seconds,
Automatic Memory will be operated.
Disc mode: Switches between play and pause.
• SEARCH Button: Not used.
button
Performs stop.
DVD/Video CD:
Pressing once stops the PRE stop; Pressing
twice sets stop.
MENU Button
DVD mode: Shows the menu display.
Video CD mode:
Turns PBC ON or OFF. (for Video CD with
PBC functions)
CLR Button
Changer mode:
DISC Select (UP) Button selects a disc in
ascending order.
,
,
,
DVD mode:
Selects an item displayed in the screen.
ENT. Button
Enters the selected item.
button
Radio mode: SEEK (UP) button
CD/Changer mode:
Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.
MP3/WMA mode:
Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.
DVD/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for more
than 1 second to forward the disc at
double speed. Hold for more than 5
seconds to forward the disc at 8 times the
normal speed.
• When pressed and held in while in the
pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.
• The picture is forwarded by one frame
each time the button is pressed in the
pause mode.
Removes numbers (one character at a time) that have been
selected and input.
Press and hold for 2 seconds. All the characters which were
selected and input are erased.
Numeric Keypad
DISP/TOP M. Button
Not used.
DVD/Video CD mode:
Shows playback status.
DVD mode: By pressing more than 2 seconds, shows the
top menu display.
ANGLE Button
SETUP Button
Not used.
AUDIO Button
DVD/Video CD mode: Switches audio.
Inputs numbers.
MONITOR Button
DVD mode:
Switches the angle of the picture.
SUBTITLE button
DVD mode:
Switches the subtitle.
• The SETUP operation of the unit cannot be carried out from the
remote control.
• Some operations may not be possible depending on the disc.
BAND Button
Radio mode: Changes the band.
Changer mode:
Switches the disc mode.
(when an optional KCA-410C is connected)
A.PROC Button
Press the button to call the Bass engine setting screen.
MUTE Button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
By pressing the button for more than 2 seconds, the monitor
opens or closes.
UP Button
Radio mode: Selects, in ascending order, stations
programmed into the radio’s presets.
MP3/WMA mode:
Folder Select (UP) Button to selects the
folder.
When Using the Remote Control
• Point the remote control at the remote sensor within
about 2 meters.
• It may not be possible to operate the remote control if
the remote control sensor is exposed to direct
sunlight.
• The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
61-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 62 Wednesday, December 1, 2004 4:20 AM
Battery Replacement
Information
Battery type: CR2025 battery or equivalent.
1
Opening the battery case
Slide out the battery cover while firmly pressing in the
direction of the arrow.
About DVDs
Music CDs and DVDs have grooves (tracks) in which the digital
data is recorded. The data is represented as microscopic pits
recorded into the track – these pits are read by a laser beam to
play the disc. On DVDs, the density of the tracks and pits is
twice that of CDs, so DVDs can contain more data in less space.
CDs
Minimum pit
length 0.9 µm
1.2 mm
Track pitch 1.6 µm
DVDs
2
Replacing the battery
Put the battery in the case with the (+) indication upward as
shown in the illustration.
Minimum pit
length 0.9 µm
0.6 mm
0.6 mm
Track pitch 0.74 µm
A 12 cm disc can contain one movie or about four hours of
music.
In addition, DVDs provide sharp picture quality with vivid colors thanks
to a horizontal resolution of over 500 lines (compared to less than 300
for VHS tape). With the addition of an optional, digital audio processor
(PXA-H900/PXA-H510/PXA-H700, etc.), you can recreate the power
and presence of a movie theater with Dolby Digital 5.1-channel
Surround.
In addition, DVDs offer a variety of functions.
• Placing a battery in backwards way may cause a malfunction.
Multiple audio* (page 22)
3
Movies can be recorded in up to eight languages. The desired
language can be selected from the unit.
Closing the cover
Slide the cover as illustrated until a click is heard.
Subtitles function* (page 22)
Movies can include subtitles in up to 32 languages. The desired
subtitle language can be selected from the unit.
Multi angle function* (page 22)
When the DVD contains a movie shot from multiple angles, the
desired angle can be selected from the unit.
Multi story function*
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
With this function, a single movie includes various story lines.
You can select different story lines to view various versions of the
same movie.
Operation differs from disc to disc. Story line selection screens
including instructions appear during the movie. Just follow the
instructions.
* The functions audio languages, subtitle languages, angles, etc., differ
from disc to disc. For details, refer to the disc’s instructions.
62-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 63 Wednesday, December 1, 2004 4:20 AM
Terminology
Dolby Digital
Dolby Digital is a digital audio compression technology
developed by Dolby Laboratories that allows large quantities of
audio data to be efficiently recorded on discs. It is compatible
with audio signals from mono (1 channel) all the way up to 5.1channel surround sound. The signals for the different channels
are completely independent, and since the sound is high quality
digital there is no loss of sound quality.
* The separately sold digital audio processor (PXA-H510/PXA-H900/
PXA-H700, etc.) is required to enjoy full 5.1-channel surround
sound.
The IVA-D310 performs Dolby Digital decoding when it outputs
analog audio signals, it just happens to be 2-channel audio not
5.1-channel.
Dolby Pro Logic
Dolby Pro Logic is the technology used to decode programs
encoded in Dolby Surround. Pro logic decoding will provide you
with four channels of sound (front left/right, center and monaural
rear surround) from a 2-channel (stereo) source.
* The separately sold digital audio processor (PXA-H510/PXA-H900)
is required to enjoy Dolby Pro Logic surround sound.
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels over
the entire frequency range.
This is done with an advance, high sound quality matrix
surround decoder which draws out the spatial properties of the
original recording without adding any sounds to or changing the
sound of the source.
* The separately sold digital audio processor (PXA-H700, etc.) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
LPCM is a signal recording format used for music CDs.
Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDs are
recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving
higher sound quality than music CDs.
Rating levels (parental lock)
Center
speaker
Front
speakers
This is a function of the DVD for restricting the viewing age as
stipulated by laws in different countries. The way in which
viewing is restricted differs from DVD to DVD. Sometimes the
DVD cannot be played at all, other times certain scenes are
skipped, and other times certain scenes are replaced with other
scenes.
Rear
speakers
Subwoofer
Speaker layout for enjoying
Dolby Digital sound/dts sound
DTS
This is a home-use digital sound format of the DTS Sound
System. This is a high quality sound system, developed by
Digital Theater Systems, Inc. for use in movie theaters.
DTS has six independent sound tracks. The theater presentation
is fully realized in the home and other settings. DTS is the
abbreviation for Digital Theater System.
* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H900/PXA-H700, etc.). The DVD
video software must also have a DTS sound track.
The IVA-D310 has a built-in DTS 2-channel audio decoder.
Analog audio outputs are available.
63-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 64 Wednesday, December 1, 2004 4:20 AM
List of Language Codes
(For details, see page 28.)
Abbreviation
Code
AA
6565
Afar
Language
Abbreviation
Code
Abbreviation
Code
IE
7369
Interlingue
AB
6566
AF
6570
AM
AR
AS
AY
AZ
Language
RN
8278
Language
Abkhazian
IK
7375
Inupiak
RO
8279
Romanian
Afrikaans
IN
7378
Indonesian
RU
8285
Russian
6577
Amharic
IS
7383
Icelandic
RW
8287
Kinyarwanda
6582
Arabic
IT
7384
Italian
SA
8365
Sanskrit
6583
Assamese
IW
7387
Hebrew
SD
8368
Sindhi
6589
Aymara
JA
7465
Japanese
SG
8371
Sangho
6590
Azerbaijani
JI
7473
Yiddish
SH
8372
Serbo-Croatian
Kirundi
BA
6665
Bashkir
JW
7487
Javanese
SI
8373
Singhalese
BE
6669
Byelorussian
KA
7565
Georgian
SK
8375
Slovak
BG
6671
Bulgarian
KK
7575
Kazakh
SL
8376
Slovenian
BH
6672
Bihari
KL
7576
Greenlandic
SM
8377
Samoan
Shona
BI
6673
Bislama
KM
7577
Cambodian
SN
8378
BN
6678
Bengali, Bangla
KN
7578
Kannada
SO
8379
Somali
BO
6679
Tibetan
KO
7579
Korean
SQ
8381
Albanian
BR
6682
Breton
KS
7583
Kashmiri
SR
8382
Serbian
CA
6765
Catalan
KU
7585
Kurdish
SS
8383
Siswati
CO
6779
Corsican
KY
7589
Kirghiz
ST
8384
Sesotho
CS
6783
Czech
LA
7665
Latin
SU
8385
Sundanese
CY
6789
Welsh
LN
7678
Lingala
SV
8386
Swedish
DA
6865
Danish
LO
7679
Laothian
SW
8387
Swahili
DE
6869
German
LT
7684
Lithuanian
TA
8465
Tamil
Telugu
DZ
6890
Bhutani
LV
7686
Latvian, Lettish
TE
8469
EL
6976
Greek
MG
7771
Malagasy
TG
8471
Tajik
EN
6978
English
MI
7773
Maori
TH
8472
Thai
EO
6979
Esperanto
MK
7775
Macedonian
TI
8473
Tigrinya
ES
6983
Spanish
ML
7776
Malayalam
TK
8475
Turkmen
ET
6984
Estonian
MN
7778
Mongolian
TL
8476
Tagalog
EU
6985
Basque
MO
7779
Moldavian
TN
8478
Setswana
FA
7065
Persian
MR
7782
Marathi
TO
8479
Tonga
FI
7073
Finnish
MS
7783
Malay
TR
8482
Turkish
FJ
7074
Fiji
MT
7784
Maltese
TS
8483
Tsonga
Tatar
FO
7079
Faroese
MY
7789
Burmese
TT
8484
FR
7082
French
NA
7865
Nauru
TW
8487
Twi
FY
7089
Frisian
NE
7869
Nepali
UK
8575
Ukrainian
Urdu
GA
7165
Irish
NL
7876
Dutch
UR
8582
GD
7168
Scots Gaelic
NO
7879
Norwegian
UZ
8590
Uzbek
GL
7176
Galician
OC
7967
Occitan
VI
8673
Vietnamese
Volapuk
GN
7178
Guarani
OM
7977
(Afan) Oromo
VO
8679
GU
7185
Gujarati
OR
7982
Oriya
WO
8779
Wolof
HA
7265
Hausa
PA
8065
Punjabi
XH
8872
Xhosa
Yoruba
HI
7273
Hindi
PL
8076
Polish
YO
8979
HR
7282
Croatian
PS
8083
Pashto, Pushto
ZH
9072
Chinese
HU
7285
Hungarian
PT
8084
Portuguese
ZU
9085
Zulu
HY
7289
Armenian
QU
8185
Quechua
IA
7365
Interlingua
RM
8277
Rhaeto-Romance
64-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 65 Wednesday, December 1, 2004 4:20 AM
List of Country Codes
(For details, see page 28.)
Abbreviation
Code
Abbreviation
Code
Abbreviation
Code
AD
6568
Andorra
Country
CK
6775
Cook Islands
Country
GR
7182
Greece
Country
AE
6569
United Arab
Emirates
CL
6776
Chile
GS
7183
South Georgia and
the South Sandwich
Islands
AF
6570
Afghanistan
CM
6777
Cameroon
GT
7184
Guatemala
AG
6571
Antigua and
Barbuda
CN
6778
China
GU
7185
Guam
AI
6573
Anguilla
CO
6779
Colombia
GW
7187
Guinea-Bissau
AL
6576
Albania
CR
6782
Costa Rica
GY
7189
Guyana
AM
6577
Armenia
CU
6785
Cuba
HK
7275
Hong Kong
AN
6578
Netherlands Antilles
CV
6786
Cape Verde
HM
7277
Heard Island and
McDonald Islands
AO
6579
Angola
CX
6788
Christmas Island
HN
7278
Honduras
AQ
6581
Antarctica
CY
6789
Cyprus
HR
7282
Croatia
AR
6582
Argentina
CZ
6790
Czech Republic
HT
7284
Haiti
AS
6583
American Samoa
DE
6869
Germany
HU
7285
Hungary
AT
6584
Austria
DJ
6874
Djibouti
ID
7368
Indonesia
Ireland
AU
6585
Australia
DK
6875
Denmark
IE
7369
AW
6587
Aruba
DM
6877
Dominica
IL
7376
Israel
AZ
6590
Azerbaijan
DO
6879
Dominican Republic
IN
7378
India
BA
6665
Bosnia and
Herzegovina
DZ
6890
Algeria
IO
7379
British Indian Ocean
Territory
BB
6666
Barbados
EC
6967
Ecuador
IQ
7381
Iraq
BD
6668
Bangladesh
EE
6969
Estonia
IR
7382
Iran, Islamic
Republic of
BE
6669
Belgium
EG
6971
Egypt
IS
7383
Iceland
BF
6670
Burkina Faso
EH
6972
Western Sahara
IT
7384
Italy
BG
6671
Bulgaria
ER
6982
Eritrea
JM
7477
Jamaica
BH
6672
Bahrain
ES
6983
Spain
JO
7479
Jordan
BI
6673
Burundi
ET
6984
Ethiopia
JP
7480
Japan
BJ
6674
Benin
FI
7073
Finland
KE
7569
Kenya
BM
6677
Bermuda
FJ
7074
Fiji
KG
7571
Kyrgyzstan
BN
6678
Brunei Darussalam
FK
7075
Falkland Islands
KH
7572
Cambodia
BO
6679
Bolivia
FM
7077
Micronesia,
Federated States of
KI
7573
Kiribati
BR
6682
Brazil
FO
7079
Faroe Islands
KM
7577
Comoros
BS
6683
Bahamas
FR
7082
France
KN
7578
Saint Kitts and Nevis
BT
6684
Bhutan
GA
7165
Gabon
KP
7580
Korea, Democratic
People’s Republic of
Korea, Republic of
BV
6686
Bouvet Island
GB
7166
United Kingdom
KR
7582
BW
6687
Botswana
GD
7168
Grenada
KW
7587
Kuwait
BY
6689
Belarus
GE
7169
Georgia
KY
7589
Cayman Islands
BZ
6690
Belize
GF
7170
French Guiana
KZ
7590
Kazakstan
CA
6765
Canada
GH
7172
Ghana
LA
7665
Lao People’s
Democratic Republic
CC
6767
Cocos (Keeling)
Islands
Gi
7173
Gibraltar
LB
7666
Lebanon
CD
6768
Congo, the
Democratic Republic
of the
GL
7176
Greenland
LC
7667
Saint Lucia
CF
6770
Central African
Republic
GM
7177
Gambia
LI
7673
Liechtenstein
CG
6771
Congo
GN
7178
Guinea
LK
7675
Sri Lanka
CH
6772
Switzerland
GP
7180
Guadeloupe
LR
7682
Liberia
CI
6773
Cote d’lvoire
GQ
7181
Equatorial Guinea
LS
7683
Lesotho
65-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 66 Wednesday, December 1, 2004 4:20 AM
Abbreviation
Code
Abbreviation
Code
Abbreviation
Code
LT
7684
Lithuania
Country
PA
8065
Panama
Country
TD
8468
Chad
Country
LU
7685
Luxembourg
PE
8069
Peru
TF
8470
French Southern
Territories
LV
7686
Latvia
PF
8070
French Polynesia
TG
8471
Togo
LY
7689
Libyan Arab
Jamahiriya
PG
8071
Papua New Guinea
TH
8472
Thailand
MA
7765
Morocco
PH
8072
Philippines
TJ
8474
Tajikistan
MC
7767
Monaco
PK
8075
Pakistan
TK
8475
Tokelau
MD
7768
Moldova, Republic of
PL
8076
Poland
TM
8477
Turkmenistan
MG
7771
Madagascar
PM
8077
Saint Pierre and
Miquelon
TN
8478
Tunisia
MH
7772
Marshall Islands
PN
8078
Pitcairn
TO
8479
Tonga
MK
7775
Macedonia, The
former Yugoslav
Republic of
PR
8082
Puerto Rico
TP
8480
East Timor
Turkey
ML
7776
Mali
PT
8084
Portugal
TR
8482
MM
7777
Myanmar
PW
8087
Palau
TT
8484
Trinidad and Tobago
MN
7778
Mongolia
PY
8089
Paraguay
TV
8486
Tuvalu
MO
7779
Macau
QA
8165
Qatar
TW
8487
Taiwan, Province of
China
MP
7780
Northern Mariana
Islands
RE
8269
Reunion
TZ
8490
Tanzania, United
Republic of
MQ
7781
Martinique
RO
8279
Romania
UA
8565
Ukraine
MR
7782
Mauritania
RU
8285
Russian Federation
UG
8571
Uganda
MS
7783
Montserrat
RW
8287
Rwanda
UM
8577
United States Minor
Outlying Islands
MT
7784
Malta
SA
8365
Saudi Arabia
US
8583
United States
MU
7785
Mauritius
SB
8366
Solomon Islands
UY
8589
Uruguay
MV
7786
Maldives
SC
8367
Seychelles
UZ
8590
Uzbekistan
MW
7787
Malawi
SD
8368
Sudan
VA
8665
Holy See (Vatican
City State)
MX
7788
Mexico
SE
8369
Sweden
VC
8667
Saint Vincent and
the Grenadines
MY
7789
Malaysia
SG
8371
Singapore
VE
8669
Venezuela
MZ
7790
Mozambique
SH
8372
Saint Helena
VG
8671
Virgin Island, British
NA
7865
Namibia
SI
8373
Slovenia
VI
8673
Virgin Islands, U.S
NC
7867
New Caledonia
SJ
8374
Svalbard and Jan
Mayen
VN
8678
Viet Nam
NE
7869
Niger
SK
8375
Slovakia
VU
8685
Vanuatu
NF
7870
Norfolk Island
SL
8376
Sierra Leone
WF
8770
Wallis and Futuna
NG
7871
Nigeria
SM
8377
San Marino
WS
8783
Samoa
NI
7873
Nicaragua
SN
8378
Senegal
YE
8969
Yemen
NL
7876
Netherlands
SO
8379
Somalia
YT
8984
Mayotte
NO
7879
Norway
SR
8382
Suriname
YU
8985
Yugoslavia
NP
7880
Nepal
ST
8384
Sao Tome and
Principe
ZA
9065
South Africa
NR
7882
Nauru
SV
8386
El Salvador
ZM
9077
Zambia
NU
7885
Niue
SY
8389
Syrian Arab
Republic
ZW
9087
Zimbabwe
NZ
7890
New Zealand
SZ
8390
Swaziland
OM
7977
Oman
TC
8467
Turks and Caicos
Islands
66-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 67 Wednesday, December 1, 2004 4:20 AM
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items
in the following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the rest of your
system is properly connected, or then consult your authorized
Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected according to the instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with the
proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise, etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
• Blackout mode is activated.
- Cancel Blackout mode.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness control is set at the minimum position.
- Adjust the Brightness control.
• Temperature in the vehicle is too low.
- Increase the vehicle’s interior temperature to operation
temperature range.
• Connections to the DVD, CD player, navigation system are not
securely made.
- Check the connections and firmly connect.
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle’s interior temperature to cool.
Unclear or noisy display.
• Fluorescent plate is worn out.
- Replace the fluorescent plate.
Navigation system inoperative.
• Connections to the navigation system are incorrect.
- Check the connections with the navigation system and connect
the cables correctly and firmly.
The remote control is inoperative.
• The remote control sensor setting of “Rear Entertainment
Function” is not set to this unit.
- Set for this unit.
Unclear picture display.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube*.
Radio
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
CD/MP3/WMA/DVD/Video CD
Disc playback sound is wavering.
• Moisture condensation in the disc Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Make sure the disc is being inserted following the instructions
in the CD (MP3/WMA/DVD/Video CD) Player Operation
section.
Unable to fast forward or backward the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your unit
can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc. Consult
your nearest ALPINE dealer.
Disc playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
* The fluorescent tube replacement is not free of charge even within the
warranty period, for the tube is an article of consumption.
67-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 68 Wednesday, December 1, 2004 4:20 AM
Error displays
• Mechanical error
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest ALPINE dealer.
MP3/WMA is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” (pages 17 and 18), then rewrite
in the format supported by this device.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
No picture is produced.
• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor’s parking brake lead is not connected.
- Connect the monitor’s parking brake lead and set the parking
brake.
(For details, refer to the monitor’s instructions.)
• Monitor’s parking brake is not set.
- Connect the monitor’s parking brake lead and set the parking
brake.
(For details, refer to the monitor’s instructions.)
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to playback with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be slightly disturbed, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
• Monitor’s fluorescent tube is worn.
- Replace the monitor’s fluorescent tube.
Indication for CD/MP3/WMA
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• Mechanism error.
1) Press
and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
Image stops sometimes.
• Disc is scratched.
- Replaced with a non-scratched disc.
68-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 69 Wednesday, December 1, 2004 4:20 AM
Indication for DVD/Video CD
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Protective circuit is activated to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
STOP OR EJECT DISC
BEFORE USING DVD-SETUP
• The DVD setup operation was attempted while playback of a
disc is not stopped.
- Stop playback of the disc or eject the disc before the DVD
setup operation.
Indication for CD changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
• PAL disc is loaded.
- Load an NTSC disc
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• Mechanism error.
1) Press
and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• No indicated disc.
- Choose another disc.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
69-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 70 Wednesday, December 1, 2004 4:20 AM
Indication for SAT Receiver Mode
Indication for iPod Mode
• The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
• The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
(XM mode)
(SIRIUS mode)
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
(XM mode)
• There are no songs in the iPod.
- Download songs to the iPod and connect to the IVA-D310.
• Communication error
- Turn the ignition key off, and then set to ACC or ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod cable.
(SIRIUS mode)
• XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
(XM mode)
• Caused by the iPod Software Version not being compatible with
the optional adapter KCA-420i.
- Refer to the Owner’s Manual of the optional adapter KCA420i, and update the iPod Software Version to be compatible
with the optional adapter KCA-420i.
(SIRIUS mode)
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
(XM mode)
(SIRIUS mode)
• The channel currently selected has stopped broadcasting.
- Select another channel.
• The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
• There is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
70-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 71 Wednesday, December 1, 2004 4:20 AM
GENERAL
Specifications
Power Requirement
MONITOR SECTION
Screen Size
7.0"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements 336,960 pcs. (1,440 × 234)
Effective Number of Picture Elements
99.99% or more
Illumination System
Cold cathode fluorescent tube
14.4 V DC
(11–16 V allowable)
Operating temperature
+32°F to +113°F
(0°C to + 45°C)
Power Output
18 W RMS × 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Output Voltage
Weight
2,000 mV/10k ohms
(Monitor Section) 2.2 kg
(4 lbs. 14 oz)
(Tuner Section) 1.2 kg
(2 lbs. 10 oz)
FM TUNER SECTION
Tuning Range
87.7 – 107.9 MHz
Mono Usable Sensitivity
9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity
13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity
80 dB
Signal-to-Noise Ratio
80 dB
Stereo Separation
45 dB
Capture Ratio
2.0 dB
AM TUNER SECTION
Tuning Range
Usable Sensitivity
530 – 1,710 kHz
22.5 µV/27.0 dB
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
5 – 20,000 Hz
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
85 dB (at 1 kHz)
NTSC
500 lines or greater
1Vp-p (75 ohms)
DVD: 60 dB
More than 105 dB
Audio output level
Preout (Front, Rear):
Preout (Subwoofer):
Auxout:
Ai-NET:
2V/10k ohms (max.)
2V/10k ohms (max.)
1.2V/10k ohms
850 mV
CHASSIS SIZE (Monitor section)
Width
Height
Depth
178 mm (7")
50 mm (2")
165 mm (6-1/2")
CHASSIS SIZE (Tuner section)
Width
Height
Depth
275 mm (10-13/16")
40 mm (1-9/16")
170 mm (6-3/4")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%.
This means that there is a possibility that 0.01% of the pixels could
be either always ON or OFF.
PICKUP
Wave length
DVD:
CD:
Laser power
665 nm
785 nm
CLASS II
CAUTION
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of Monitor player)
71-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 72 Wednesday, December 1, 2004 4:20 AM
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 5 to 7 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
MAKE THE CORRECT CONNECTIONS
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wires insulation from being cut by
the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your IVA-D310. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the IVA-D310 to the fuse box, make sure
the fuse for the intended circuit of the IVA-D310 has the
appropriate amperage. Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
• The IVA-D310 uses female RCA-type jacks for connection to
other units (e.g. amplifier) having RCA connectors. You may
need an adaptor to connect other units. If so, please contact your
authorized ALPINE dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
• The Display must be completely retracted in the casing when
installing. If it is not, problems may occur.
• When installing in automobiles, make sure the Display can open/
close without coming in contact with the gear shift.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
72-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 73 Wednesday, December 1, 2004 4:20 AM
Reinforce the monitor unit with a metal mounting strap (not
supplied). Secure the ground lead of the unit to a clean
metal spot using a screw ( ) already attached to the
vehicle’s chassis.
Installation
Installing the Monitor
• For the screw marked
, use an appropriate screw for the
chosen mounting location.
Installation Location
Before deciding on the mounting location, check that opening and
closing the display will not hamper gear shifting in that position.
Connect each input lead coming from an amplifier or
equalizer to the corresponding output lead coming from the
left rear of the IVA-D310. Connect all other leads of the IVAD310 according to details described in the Connections
section.
3
• Install at an angle of within 30 degrees from the horizontal.
• The monitor’s angle is set to 90 degrees at the factory. Depending on
the car, the monitor may hit the dashboard when opened. The
monitor’s angle can be adjusted and stored in memory so that the
monitor will not hit the dashboard when opening. For adjusting the
monitor, refer to “Adjusting the Monitor Viewing Angle” on page 11.
Even when the vehicle’s battery power is removed, the adjusted
monitor angle remains stored in memory.
1
Dashboard
Mounting Bracket
(Included)
Mounting Sleeve
(Included)
Lock Pin
Slide the IVA-D310 into the dashboard. When the unit is in
place, make sure the locking pins are fully seated in the
down position. This can be done by pressing firmly in on the
unit while pushing the locking pin down with a small
screwdriver. This ensures that the unit is properly locked
and will not accidentally come out from the dashboard.
Install the supplied Front Frame.
Removal
IVA-D310
1. Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see Step 3). As each
pin is unlocked, gently pull out on the unit to make sure
it does not re-lock before unlocking the second pin.
2. Pull the unit out, keeping it unlocked as you do so.
Flush head Screws
(M4 × 3) (Included)
< JAPANESE CAR >
Slide the mounting sleeve into the dashboard. Install the
supplied bracket on the monitor.
• Make sure to use the supplied Flush head screw (M4 × 3) to
install the monitor.
If you use another screw to install the monitor, it may cause a
malfunction.
2
To install using the vehicle’s standard bracket.
Flush Head Screws (M4 × 3)
(Included)
Ground Lead
IVA-D310
Mounting Bracket
Screw
Hex Nut (M5)
Bolt Stud
IVA-D310
Meatal Mounting
Strap
• Make sure to use the supplied flush head screw (M4 × 3) to install
the monitor.
If you use another screw to install the monitor, it may cause a
malfunction. However, only if you cannot install with the flush head
screws (M4 × 3), use the supplied screw (M4 × 6).
Ground
Lead
Chassis
Front Frame
(Included)
Wider edge should face down.
73-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 74 Wednesday, December 1, 2004 4:20 AM
2
Installing the Tuner Box
Caution
Do not block the unit’s fan or heat sink, thus preventing air
circulation. If blocked, heat will accumulate inside the unit and
may cause a fire.
Install the tuner on the floor with the supplied flangehead tapping screws (M4 × 14).
Flange-head tapping screws
(M4 × 14) (Included)
Air ventilation hole
<Side of the tuner box>
Tuner Box
When mounting with Velcro fasteners
When mounting the tuner with the Velcro fasteners, be sure to choose a
flat location.
Do not hang the unit from the bottom of the dashboard or rear deck with
the Velcro fasteners.
1
Remove the Protective paper and attach two pieces
of Velcro fastener to the bottom of the Tuner.
Installing the DC/DC Converter
Install the DC/DC Converter on the floor with the
supplied flange-head tapping screws (M4 × 14).
Flange-head tapping
screws (M4 × 14)
(Included)
DC/DC Converter
Tuner Box
Protective paper
Protective paper
2
Velcro Fasteners
(Included)
Check the position, and then fix the Tuner to the
floor carpet.
When mounting with Screws
When mounting the tuner with the screws, be sure to choose a flat
location.
When making holes, be careful not to scratch any pipes or wires.
1
Connect the bracket to both the flanks of the tuner
with the supplied pan screws (M4 × 8).
Tuner Box
Bracket (Included)
Pan screws (M4 × 8) (Included)
74-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 75 Wednesday, December 1, 2004 4:20 AM
Parking Brake Lead Connection
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
1
2
Vehicle Cable
Pliers
Pinch Connector
Monitor Cable
Stopper
Foot Brake Lead / Parking Brake Lead Connection
Foot brake lamp
FOOT BRAKE
IVA-D310
Tuner Box
(Yellow/Black)
PARKING BRAKE
Foot brake lead
Pinch
Connector
Foot brake switch
Chassis
Parking brake lamp
(Yellow/Blue)
Pinch
Connector
Parking brake lead
Battery
Parking brake switch
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
IGNITION
(Red)
SPST SW (Optional)
FUSE (5A)
(Optional)
BATTERY
(Yellow)
IVA-D310
(Monitor and
Tuner Box)
FUSE (20A)
(Optional)
Battery
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
• The diagram and the fuse amperage shown above are in the case when IVA-D310 is used individually.
• If the switched power (ignition) lead of the IVA-D310 is connected directly to the positive (+) post of the vehicle’s battery, the IVA-D310 draws
some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged.
To prevent external noise from entering the audio system.
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
•
•
•
•
75-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 76 Wednesday, December 1, 2004 4:20 AM
Connections (IVA-D310 Wiring Diagram)
Antenna
IVA-D310
<Monitor>
To remoto control
interface box
BATTERY
(Yellow)
Battery
GND
(Black)
REMOTE OUT
To remote input lead
(White/Brown)
IVA-D310
Tuner BOX
REMOTE IN
To remote output lead
(White/Brown)
REVERSE
To plus side of the back
lamp signal lead of the car
SUBW.
PRE IN/OUT
(Orange/White)
REAR
L
R
FRONT
POWER SUPPLY
Ai-NET
M.CONT
REMOTE IN / OUT
To monitor control lead
EXT.OUT
(White/Pink)
NAVIGATION IN
DISPLAY OUT
AV SELECTOR
REMOTE
TURN-ON
CAMERA IN
AUX OUT
VIDEO
To amplifier or equalizer
L
(Blue/White)
AUDIO
R
AUX IN
POWER ANT
RADIO ANTENNA IN
To power antenna
(Blue)
AUDIO INTERRUPT IN
To vehicle phone
(Pink/Black)
EQ/DIV
PARKING BRAKE
To the parking brake
signal lead
(Yellow/Blue)
NORM
FOOT BRAKE
To the foot brake cord or
brake lamp cord
(Yellow/Black)
IGNITION
(Red)
Ignition key
BATTERY
(Yellow)
GND
Battery
(Black)
SPEAKER
LEFT
FRONT
(White)
(White/
Black)
SPEAKER
LEFT
REAR
(Green/
Black)
(Green)
SPEAKER
RIGHT
REAR
(Violet)
(Violet/
Black)
SPEAKER
RIGHT
FRONT
(Gray/
Black)
(Gray)
Speakers
Front left
Rear left
Rear right
Front right
• Set the system switch to “NORM” when only a changer is connected (when the Ai-NET compatible equalizer is not used).
76-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 77 Wednesday, December 1, 2004 4:20 AM
Antenna Extension Cable
AV Select Connector
Digital Output Terminal (Optical)
Use when combining fiber digital input compatible
products.
When this connector is connected to the optional expansion
box (VPE-S431), connect this to the HEAD UNIT terminal of
VPE-S431.
Power Supply Connector
Ext. Output Connector
DC/DC Converter
• Do not install the converter at a location subjected to water
such as under the floor mat or air conditioner. This may cause a
malfunction.
• Do not bundle the DC/DC converter cable with other audio
cables. Also, do not install the cables directly next to the unit.
Doing so may induce noise into your system.
• Keep the DC/DC converter away from the Antenna cables and
the rear side of the unit, otherwise noise may be generated when
receiving radio broadcast.
Battery Lead (Yellow)
If this connector is connected to the optional Amplifier Link
compatible monaural Amplifier, connect this to the optional
Amplifier Link Box, and output the Amplifier Link control
signal.
Ai-NET Connector
Connect this to the output or input connector of other
product (CD changer, Equalizer, iPod adapter*, etc.)
equipped with Ai-NET.
* If you connect to iPod, you need the optional adapter (KCA-420i).
For details on connection, refer to the Owner’s Manual of the KCA420i.
Connect this lead to the positive (+) post of the vehicle’s
battery.
Front input/output Terminal
Fuse Holder (10A)
Rear input/output Terminal
Ground Lead (Black)
Use when connecting an amplifier or Equalizer.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Subwoofer output Terminal
Remote Control Output Lead (White/Brown)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Remote Control Input Lead (White/Brown)
Power Antenna Lead (Blue)
Connect the external Alpine product to the remote control
output lead.
Connect this lead to the +B terminal of your power antenna,
if applicable.
Reverse Lead (Orange/White)
Audio Interrupt In Lead (Pink/Black)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
Parking Brake Lead (Yellow/Blue)
Monitor Control Lead (White/Pink)
Connect to the vehicle's foot brake lead or brake lamp lead.
Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor.
Monitor Extension Cable (Included)
Remote IN/OUT Terminal
Display Output Terminal
System Switch
Use when connecting an amplifier or Equalizer.
Connect the input lead of an amplifier for the subwoofer to
this terminal.
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-D310.
Foot Brake Lead (Yellow/Black)
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Fuse Holder (10A)
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Right Front (+) Speaker Output Lead (Gray)
Antenna Receptacle
Left Rear (+) Speaker Output Lead (Green)
AUX Input Terminals/AUX Output Terminals
Left Rear (–) Speaker Output Lead (Green/Black)
If these terminals are connected to the optional expansion
box (VPE-S431), the AUX input and output terminals are not
used on this unit. Connect AUX IN 1, 2 and 3, and the AUX
OUT 1 and 2 terminals of the expansion box (VPE-S431) to
the external device(s).
Right Front (–) Speaker Output Lead (Gray/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Remote Control Interface Connector
Connect to the remote control interface box.
77-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 78 Wednesday, December 1, 2004 4:20 AM
System Example
Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD player and
changer.
IVA-D310 Monitor
NVE-N852A/NVE-N871A
Navigation system
(Sold Separately)
Fiber optic
cable
*Fiber digital Input terminal
(for head unit)
IVA-D310 Tuner BOX
Audio Processor (Ai-NET)
(Fiber Digital compatible)
(Sold Separately)
SUBW.
PRE IN/OUT
REAR
L
POWER SUPPLY
R
FRONT
Ai-NET
REMOTE IN / OUT
EXT.OUT
NAVIGATION IN
Ai-NET
cable
DISPLAY OUT
AV SELECTOR
CAMERA IN
Fiber digital
Input terminal
(for DVD
Player)
Fiber digital
Input terminal
(for Changer)
AUX OUT
VIDEO
Ai-NET
cable
L
AUDIO
R
AUX IN
RADIO ANTENNA IN
**Fiber
optic cable
EQ/DIV
NORM
Fiber optic cable
(Yellow)
(White/Brown)
(White/Brown)
REMOTE OUT
REMOTE IN
DVD Video Player
(Ai-NET)
(DVA-5210 etc.)
(Sold Separately)
Ai-NET cable
CD Changer
(Ai-NET)
(Sold Separately)
**Only connect fiber digital compatible CD Changer
• When the fiber digital compatible product is connected, it is necessary to set the mode of this unit. Refer to “Setting the Digital Output” (page 35)
and set to ON. Then refer to “Optical Digital Input Selection for an External Audio Processor” (page 35) and switch the setting.
• * When connecting with PXA-H510 :
- Connect the fiber digital input terminal to the DVD.
- IVA-D310, DVA-5200, DVA-5205 or DVA-5210 cannot be connected simultaneously when fiber digital is in use.
• When the NVA-N751AS is connected for the Navigation System, use the RGB conversion cable KWE-503N (Sold separately).
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
78-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 79 Wednesday, December 1, 2004 4:20 AM
RGB Cable (Included with NVE-N852A, not included
with NVE-N871A)
Remote IN/OUT Terminal
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Digital Output Terminal
Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
AUX Video Input (AUX1) Terminal
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
RCA Extension Cable (Included with DVD video
player)
Ai-NET Cable (Included with DVD video player)
Fiber optic Cable (Sold Separately)
Ai-NET Cable (Included with Audio Processor)
Ai-NET Cable (Included with CD Changer)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
To Ai-NET Connector (Gray)
To Ai-NET Connector (Black)
79-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 80 Wednesday, December 1, 2004 4:20 AM
When Connecting External Equipment
To Audio Input terminal
EQ/DIV
IVA-D310
Tuner BOX
Rear monitor
(Sold Separately)
NORM
To Video Input terminal
SUBW.
PRE IN/OUT
REAR
To Video Output terminal
R
L
FRONT
POWER SUPPLY
Ai-NET
Back-up camera
(Sold Separately)
REMOTE IN / OUT
EXT.OUT
NAVIGATION IN
DISPLAY OUT
AV SELECTOR
To Video Output terminal
CAMERA IN
AUX OUT
TV Tuner or VCR
(Sold Separately)
VIDEO
(MONO)
L
AUDIO
R
AUX IN
To Audio Output terminal
RADIO ANTENNA IN
(White/Pink)
M.CONT
M.CONT
(White/Pink)
* Connect this to the touch panel-compatible rear monitor.
(White/Brown)
REMOTE OUT
REMOTE IN
(White/Brown)
(White/Brown)
REMOTE IN
REMOTE OUT
(White/Brown)
(Orange/White)
REVERSE
Use only when back-up camera is connected.
System Switch
Remote Control Output Lead (White/Brown)
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Use when connecting a back-up camera.
Connect to the plus side of the car’s reverse lamp
which lights when the transmission is shifted into
reverse (R).
Switches the video picture to the back-up camera.
This is linked to putting the car into reverse (R).
AUX Video/Audio Output Terminal
RCA Extension Cable (Sold separately)
Remote IN/OUT Terminal
CAMERA Input Terminal
Use when connecting an optional monitor etc.
AUX Video/Audio Input Terminal
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor.
80-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
01GB00IVAD310.book Page 81 Wednesday, December 1, 2004 4:20 AM
Connect an expansion box (VPE-S431), DVD Player, DVD Changer or the Touch
Panel-compatible Monitor.
IVA-D310 Tuner BOX
SUBW.
PRE IN/OUT
REAR
L
POWER SUPPLY
R
FRONT
Ai-NET
To AUX Input (AUX IN 1)
Terminals
To AUX Input (AUX IN 3)
Terminals
REMOTE IN / OUT
EXT.OUT
NAVIGATION IN
DVD PLAYER
(DVA-5210, etc.)
(Sold separately)
DISPLAY OUT
AV SELECTOR
CAMERA IN
AUX OUT
VIDEO
L
AUDIO
EXPANSION BOX
(VPE-S431)
(Sold separately)
R
AUX IN
RADIO ANTENNA IN
To AUX Input (AUX IN 2)
Terminals
DVD CHANGER
(Sold separately)
To AUX Output
Terminals
EQ/DIV
NORM
M.CONT
(White/Pink)
M.CONT
To Video Input
Terminals
To Audio Input
Terminals
(White/Pink)
REMOTE
IN
(White/Brown)
REMOTE OUT
(White/Brown)
TOUCH PANEL COMPATIBLE
REAR MONITOR
(Sold separately)
REMOTE OUT (AUX1)
REMOTE IN (AUX1)
(White/Brown)
(White/Brown)
(White/Brown)
REMOTE IN (AUX2)
REMOTE OUT
(AUX2)
(White/Brown)
• If the expansion box (VPE-S431) is connected to either a DVD video player or DVD changer, connect this to AUX IN 1. If this is
connected to AUX IN 2, remote control operation will not be possible. If both are to be connected, connect the DVD video player to
AUX IN 1, and the DVD changer to AUX IN 2.
System Switch
Monitor Control Lead (White/Pink)
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor.
• Be sure to turn the power off to the unit before changing the
switch position.
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
To AV Selector Terminal
Ai-NET Cable (Included with DVD video player)
AUX Video/Audio Output Terminal
Ai-NET Cable (Included with DVD changer)
RCA Extension Cable (Sold separately)
To Ai-NET Connector (Black)
AV Selector Cable (Included with VPE-S431)
To Ai-NET Connector (Gray)
Remote Control Output Lead (White/Brown)
81-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
02WARRANTY_IVA310.fm Page 73 Thursday, December 2, 2004 2:41 AM
WARRANTY -H4 :EN (for US model)
Download PDF

advertising