American Power Conversion AFX Series Humidifier User Manual

®
NetworkAIR AFX Series
TM
Precision Air-Conditioning Units—60 Hz
Technical Data
Contents
Available Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Downflow 1
Upflow front-return 1
Upflow rear-return 1
Indoor rear-discharge centrifugal condenser 1
Indoor top-discharge centrifugal condenser 1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction 3
Capacity 3
Air pattern 3
Control 3
Configuration 4
Front access 4
Humidity control 4
Compliance 4
Model Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Microprocessor controller 7
Overall cabinet 8
Blower assembly 9
Electrical panel 9
Humidifier 9
Electric reheat 9
Refrigeration system and compressor 9
Cooling coil 10
Condenser 10
Air filter 10
Water-regulating valves 10
Airflow sensor 10
Clogged filter alarm 10
Emergency drain pan 11
Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Emergency/environmental 13
External components 13
Control/monitoring 14
Reheat 15
System Components 15
APC NetworkAIR AFX Series: Contents
i
Performance Specifications. . . . . . . . . . . . . . . . . . . . . . . . . 17
Net cooling capacity—air/remote condensing 17
Net cooling capacity—water 18
Net cooling capacity—glycol 19
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Air system 21
Coolant requirements 21
Pump system 21
Water regulating valve–2-Way/3-Way, single seated 22
Humidification—solid state electrode canister 22
Filters 22
Evaporator coil 22
Compressor—scroll 22
Electric Reheat 23
Hot gas reheat 23
Hot water reheat 23
Steam reheat 23
Drycooler 23
Centrifugal indoor condenser 23
Physical data 24
Connection sizes 24
Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Electric Reheat—6–14 ton 25
Electric Reheat—18–28 ton 26
Steam/hot water/or no-reheat—6–14 ton 27
Steam/hot water/or no-reheat—18–28 ton 28
Indoor centrifugal condenser units 29
Guide Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
General 31
Product 31
Individual systems 34
Options 36
Dimensional Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Downflow—6–8 ton 39
Downflow—10–18 ton 40
Downflow—20–28 ton 41
Upflow front-return—6–8 ton 42
Upflow front-return—10–18 ton 43
Upflow front-return—20–28 ton 44
Upflow rear-return—6–8 ton 45
Upflow rear-return—10–18 ton 46
ii
APC NetworkAIR AFX Series: Contents
Upflow rear-return—20–28 ton 47
Indoor rear-discharge centrifugal condenser—6–8 ton 48
Indoor rear-discharge centrifugal condenser—10–18 ton 49
Indoor rear-discharge centrifugal condenser—20–28 ton 50
Indoor top-discharge centrifugal condenser—6–8 ton 51
Indoor top-discharge centrifugal condenser—10–18 ton 52
Indoor top-discharge centrifugal condenser—20–28 ton 53
Air-Cooled Condensers and Drycoolers . . . . . . . . . . . . . . . 55
Key to the model number 55
Air-cooled condenser—physical data 56
Air-cooled condenser—electrical data 57
Single-fan air-cooled condenser—6 ton 58
Dual-fan air-cooled condenser—6–14 ton 59
Triple-fan air-cooled condenser—14–20 ton 60
Dual-fan air-cooled condenser—20–26 ton 61
Triple-fan air-cooled condenser—26–28 ton 62
Drycooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Glycol cooled drycooler—physical data 63
Glycol cooled drycooler—electrical data 63
Dual-fan fluid cooler—6–8 ton 64
Triple-fan fluid cooler—10–12 ton 65
Dual-fan fluid cooler—14–18 ton 66
Triple-fan fluid cooler—20–28 ton 67
Pump Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Pump performance 69
Pump electrical data 69
Guidelines for Installation . . . . . . . . . . . . . . . . . . . . . . . . . 71
Room preparation 71
Unit location 71
Service access 71
Receiving the unit 71
Rigging 72
Floorstand 72
Utility connections 72
Power unit 72
Humidifier connections 72
Condensate drain 72
Water supply to humidifier 72
Water supply 73
APC Worldwide Customer Support . . . . . . . . . . . . . . . . . . 75
APC NetworkAIR AFX Series: Contents
iii
Available Models
Downflow
6–8 ton
10–18 ton
20–28 ton
Upflow front-return
6–8 ton
10–18 ton
20–28 ton
Upflow rear-return
6–8 ton
10–18 ton
20–28 ton
Indoor rear-discharge centrifugal condenser
6–8 ton
10–18 ton
20–28 ton
Indoor top-discharge centrifugal condenser
6–8 ton
10–18 ton
20–28 ton
APC NetworkAIR AFX Series: Available Models
1
Overview
Introduction
The APC AFX series precision air-conditioning system provides compact,
quiet, efficient, and reliable system solutions in the expanding precision airconditioning market. The AFX series is offered in a wide variety of
capacities, configurations, and air patterns within an extremely compact
cabinet size.
Precision environmental control requirements now reach far beyond the
confines of the traditional data center or computer room to encompass a
larger suite of applications, referred to as technology rooms.
Typical technology room applications included:
• Computer rooms
• Telecommunication facilities
• Clean rooms
• Power equipment
• Medical equipment rooms
• Archives
• LAN environments
A worldwide network of APC representatives is fully qualified to provide
engineering, sales, installation and service for our products.
Our commitment to quality is demonstrated by the APC industry-leading
two-year parts warranty.
Capacity
Available are 6 through 28 nominal tons (20 kW–96 kW) in nine models and
3 cabinet designs.
Air pattern
Downflow units discharge air into the raised floor plenum eliminating the
need for air distributing ductwork. This enables the owner to locate the unit
where space is available or relocate the unit as the room changes or expands.
These units are suitable for areas with raised floors greater than 12" (305
mm) high. Air is drawn in through the top of the unit. Downflow units also
include a static regain duct which increases performance and efficiency while
reducing noise level.
Upflow units discharge air into either a plenum or ductwork. These units are
suitable for areas with raised floors less than 12" (300 mm) high. Air is drawn
in through the front on the standard design or optionally from the rear of the
unit.
Control
The microprocessor controller provides advanced integrated system
operation and management ensuring simple, reliable and precise temperature
and humidity control.
APC NetworkAIR AFX Series: Overview
3
Configuration
Air-cooled. Unit used with an air-cooled condenser. Refrigerant lines must
be run between the indoor unit and the condenser. Air cooled units require
low maintenance and have low operating costs.
Configurations are:
• Air-cooled with remote outdoor condenser.
• Air-cooled with indoor floor mounted condenser.
Water-cooled. Unit used with a cooling tower or other source of water. Field
refrigeration piping is eliminated by a factory sealed and tested system. Water
piping to and from the unit is required.
Glycol-cooled. Unit used with a drycooler. The need for field refrigeration
piping is eliminated by a factory sealed and tested system. The glycol piping
is sealed, eliminating costly water treatment often encountered with open
cooling towers.
Remote-condensing. Unit used with a remote air-cooled condensing unit
which includes the compressor(s). This allows key maintenance procedures
to be located outside the critical environment helping eliminate access by
maintenance personnel in high security areas.
Front access
The AFX Series has full service front access for routine servicing of
components. Front access also narrows the footprint of the unit making it
possible for units to be placed side by side.
Humidity control
Humidity is managed through a self-contained steam canister humidifier for
maximum efficiency and ease of maintenance. Dehumidification control is
assured with a split evaporator coil which decreases the humidity level
without over-cooling the space, therefore reducing the need for electric
reheat.
Compliance
The AFX Series has received agency approvals by ETL and MEA#223-99-E.
Electrical systems comply with NEC and UL 1995 standards.
4
APC NetworkAIR AFX Series: Overview
Model Selection
AFX – X X X – X – X X – X
3URGXFW6HULHV
'
'RZQIORZ
$);
8
8SIORZ
$);VHULHV
9ROWDJH
&RROLQJFDSDFLW\LQ
QRPLQDOWRQQDJH;;;
%$
²
.$
0$
&RQILJXUDWLRQ
$
$LUFRROHG
:
:DWHUFRROHG
*
*O\FROFRROHG
5
5HPRWHFRQGHQVLQJ
APC NetworkAIR AFX Series: Model Selection
5
Standard Features
Microprocessor
controller
The microprocessor controller provides state of the art control for a wide
variety of environmental applications including the demanding requirements
of data centers, control rooms, clean rooms, switch rooms, MRI facilities,
CAT scan facilities and UPS Rooms. Operator Interface is provided by the
four-line, 80-character backlit LCD display. A user-friendly menu structure
along with clearly defined prompts allow the operator to easily move about
the program. Within the configuration menu the operator will find numerous
selections allowing the AFX to be tailored to meet specific requirements.
Status. Complete status monitoring is provided within the status menu of the
microprocessor controller.
Available information includes:
•
•
•
•
Current temperature
Current humidity
Temperature setpoint
Humidity setpoint
•
•
•
•
Cooling status
Heating status
Humidification status
Dehumidification status
Alarms. Quick access to any alarm condition is facilitated through the menu
structure. The alarm key acts as a hot key, providing immediate access to the
alarm display menu. Presence of a new alarm will sound the audible alarm.
The red alarm LED on the display panel will remain illuminated until all
alarms have been cleared. The temperature and humidity alarm setpoints are
adjustable.
Alarm annunciations include:
•
•
•
•
Loss of airflow
Clogged filter
High head pressure
Low suction pressure
•
•
•
•
High temperature
Low temperature
High humidity
Low humidity
Setpoints. The microprocessor is provided with independent setpoints for:
• Heating
• Cooling
• Humidification
• Dehumidification
Automatic setpoint crossover protection will prevent the setting of the heat
setpoint above the cool setpoint and the humidify setpoint above the
dehumidify setpoint. Setpoint adjustment can be restricted to only operators
with knowledge of the security codes set within the security menu structure.
Configuration. Flexibility is offered through the use of the configuration
menu. Operating requirements are satisfied by changing the configuration
settings. New configurations are stored in EEPROM and protected from
unauthorized tampering by the four-digit security password, selected in the
security menu.
APC NetworkAIR AFX Series: Standard Features
7
Configuration options include:
•
•
•
•
•
Fahrenheit or celsius display
Compressor minimum on time
Compressor minimum off time
Power loss restart time delay
Redundant unit grouping
•
•
•
•
•
Alarm input polarity
Alarm enable
Temperature deadbands
Humidity deadbands
Small room delay
Common alarm contact. A common alarm relay is installed on every
microprocessor. In the event of an alarm condition, the relay will change
state. The user can select which alarms change the state of the relay. This
feature allows for remote enunciation of alarm status.
Run times. The major components within the unit (motor, humidifier, and
compressor) have independent run timers that monitor and store accumulated
run hours on the components. The run timers are provided with operator
adjustable run time alarms.
Security. Multiple security levels prevent unauthorized adjustment of
important system parameters. The user may select a four-digit password for
setpoint and configuration changes. Should the password be forgotten, APC
can provide temporary access.
Monitoring. With the addition of a network communications card the
microprocessor may interface with the locally installed APC remote
monitoring and control system. Gateways are available for interfacing with
building management systems. Please check with APC for compatibility with
your building management system.
Cool inhibit. Prevents the unit from over-cooling during the
dehumidification cycle. If the space temperature falls below a user adjustable
setpoint, cooling will become inhibited until the space temperature returns to
setpoint.
Cool override. A manual toggle switch will allow one compressor operation
in the event of a microprocessor failure. The cool override can be field wired
to a snap acting thermostat for cooling control.
Remote shutdown. Events external to the unit, such as activation of a fire
suppression system may require the unit to shut down remotely. Additionally
this feature may be tied into a BMS that would allow remote control of the
units on/off status.
Remote relay shutdown. Remote shutdown of the NetworkAIR system
can be done by a factory installed relay. The relay can be ordered with a 24,
120, or 240 volt coil. The relay must be powered by others to disable the
NetworkAIR system.
Overall cabinet
The frame is constructed of heavy gauge steel for maximum strength. Steel
access panels are insulated for quieter operation. The unit has been designed
for full service access from the front. The flush mounted panels are
removable using convenient quarter-turn fasteners. The access doors for the
electronic controller and electrical panel can be opened without interrupting
the operation of the unit.
8
APC NetworkAIR AFX Series: Standard Features
Blower assembly
The AFX series includes multiple, centrifugal blower assemblies that have
been engineered for quiet, reliable operation. Lower blower speeds reduce
noise and extend belt and bearing life to 200,000L10 hours. Permanently
lubricated bearings, a single-belt variable pitch drive, and an adjustable
motor base all ensure dependable operation. In addition, the air return
patterns evenly distribute air across the cooling coil.
Electrical panel
The electrical panel contains the contactors, starters, overload protection
devices, and input power circuit breakers. Each wire (except jumpers) is
numbered every 3" (80 mm), or color coded to facilitate circuit tracing when
installing and servicing the unit. Each AC power circuit is individually
circuit-braker protected on all three phases. All compressor and motor
devices are thermally and short circuit protected. The electrical panel is
easily accessible from the front of the unit, and its modular construction
allows access to major components within the unit cabinet. An emergency
cool override switch can be manually activated to initiate cooling and a field
wired thermostat can be utilized to control cooling operation. All electrical
components are UL-listed and-recognized and all wiring conforms to NFPA
70 (NEC) and UL 1995 requirements.
Humidifier
The humidifier utilizes a pure steam generator specifically designed for hitech area environmental control. The pure steam eliminates contaminating
mineral deposits, potentially deadly bacteria, white dust and excessive
humidity. The humidifier requires little or no scheduled maintenance.
Automatic flushing combined with an indicator that signals when the canister
is to be changed, ensure maintenance free operation.
Electric reheat
A three-phase electrical resistance heater sized to offset the sensible cooling
capacity in the dehumidification mode is incorporated in each AFX series
unit. The reheat elements are low watt density sheathed components. The
reheat is three phase to provide even phase loading. Reheat elements are
electrically and thermally protected.
Refrigeration system
and compressor
The refrigeration system operates under an automatic microprocessor
controller for greater efficiency and accuracy. The heavy-duty compressors
are designed for year-round operation with a 15-year life expectancy. The
performance of the refrigeration system is enhanced by use of Scroll
Compressor Technology. Scroll compressors offer many advantages over
older technology semi-hermetic compressors. Vibration in the system is
greatly reduced by elimination of the reciprocating masses found in the semihermetic compressor. Risk of refrigeration leaks at compressor gaskets are
eliminated with the scroll compressors fully welded hermetic shell. The
design of the scroll is more tolerant to liquid flood back than the traditional
reciprocating compressor. Power consumption at full load is greatly reduced
with higher EER’s of the scroll. In addition reliability is enhanced due to the
fewer moving parts required using scroll technology. The end result is a
refrigeration system that offers the user optimized performance, efficiency
and reliability.
APC NetworkAIR AFX Series: Standard Features
9
Each refrigeration system includes:
• Thermal expansion valve with equalizer
• High and low pressure switches
• Sight glass with moisture indicator
• Filter drier
• Liquid line solenoid valve
Cooling coil
The AFX utilizes dual distributors on one circuit of the refrigeration system.
During dehumidification the smaller distributor is turned off effectively
reducing the active circuits of the evaporator coil. During this mode of
operation the evaporating temperature is decreased, resulting in a lower coil
surface temperature. This reduction of the coil temperature decreases the
sensible heat ratio of the coil allowing a greater percentage of moisture
removal. Additionally the warmer air leaving the inactive circuits of the
evaporator coil blends with the near saturated air from the active circuits
raising the dry bulb temperature of the blended air well above saturation.
Condenser
Water-and glycol-cooled systems employ a brazed plate condenser that uses
the latest heat transfer technology. Type 316L stainless plates are brazed
together in a vacuum furnace and comply with ASME pressure vessel code.
Pressure rating is 450 psi (3100 kPa).
Air filter
The filtration of conditioned air is extremely vital to maintaining the clean,
particle-free environment required by electrical equipment. The AFX Series
uses 30% efficient (ASHRAE 52.1–92), 4" (102 mm) deep filters, with full
depth filter pleats. In addition to high filtration properties, these filters
produce a lower pressure drop than standard filters so less energy is required
during normal operation. Filters are easily replaced from the top on
downflow units and from the front on upflow units.
Water-regulating
valves
The water-and glycol-cooled systems maintain proper performance by
sensing refrigerant discharge pressure and regulating the amount of water or
glycol supplied to the condenser. Two-way and three-way valves are
available. The standard valve pressure rating is 150 psi (1030 kPa).
Airflow sensor
The air proving switch is continuously monitored by the microprocessor.
Upon detection of a loss of air flow the microprocessor will deactivate:
cooling, heating, humidification and dehumidification. After the air flow has
been restored for a predetermined period of time the microprocessor will
reactivate the functions as needed.
Clogged filter alarm
An adjustable air pressure differently switch senses the pressure drop across
the filters. Upon sensing an excessive pressure drop, the switch activates the
alarm circuit of the microprocessor and displays a clogged filter message
simultaneously with an audible signal.
10
APC NetworkAIR AFX Series: Standard Features
Emergency drain
pan
Systems are provided with two drain pans. The primary stainless steel
condensate drain pan lies directly under the cooling coil. A secondary
emergency drain pan provides additional protection by catching any water
before it reaches the subfloor and becomes a problem. An optional factory
supplied water detector in the emergency drain pan functions as your early
warning system in the event of any water problems. A threaded flange is
factory supplied for secondary drain connections. A secondary drain pan is
not provided on bottom return or precool units.
APC NetworkAIR AFX Series: Standard Features
11
Optional Features
The following optional features are available on the AFX Series unless
otherwise noted. Certain combinations of options may not be available.
Emergency/
environmental
Smoke detector(s). The factory installed smoke detector(s) is designed to
sense smoke concentration in the return air stream. Upon detecting smoke
concentration an audible and visual alarm on the microprocessor will be
activated and the unit will immediately shut-down.
Firestat. A Firestat is available for installation in the air stream. If the return
air temperature reaches 125° F (52° C), the air conditioner will be turned off
and both an audible and visual alarm will be activated on the microprocessor.
Water detector(s). The solid-state water detector(s) activates an audible
and visual alarm on the microprocessor when moisture is detected. The water
detector is provided with 15' (5 m) of wire. Multiple detectors can be used in
the optional secondary drain pan in the sub floor.
Essential/non-essential lockout. When facilities have limited backup
power capacity, this lockout prevents the operation of electrical loads that are
not essential for continued site operation.
External
components
Floorstand. The heavy gauge floorstand raises the unit above the subfloor to
match the height of the raised floor. Heights are available from 6" to 36" (12"
to 36" for downflow units) in 3" increments and are adjustable +/- 1.5".
Adjustment is provided by threaded pedestals. Vibration absorbing pads are
included. The floorstand, pedestal and pads ship loose. Floorstands are
available for seismic applications.
Air deflector. An air deflector ships loose and attaches to the floorstand for
changing air direction from vertical to horizontal.
Plenum. The discharge plenum mounts on top of the upflow unit to direct
and distribute conditioned air. Manually adjustable, double deflecting grilles
are provided on 3 or 4 sides.Plenum shall be painted to match the color of the
unit.
Duct flange. A 1" (25 mm) duct flange is installed on a unit to provide
convenient connection to external ductwork. The duct flange can be installed
at the air outlet on upflow units, or at the air inlet on downflow units.
APC NetworkAIR AFX Series: Optional Features
13
Control/monitoring
Custom alarm dry contact closures. Each unit can be equipped with any
or all of the listed dry contact closures. Upon activation of the associated
alarm, a discreet Normally Open or Normally Closed contact is available for
remote monitoring of that discreet alarm.
• High Temperature Alarm
• Low Temperature Alarm
• High Humidity Alarm
• Low Humidity Alarm
• Compressor High Pressure Alarm
• Fan Status Alarm
• Change Filter Alarm
• Fire Alarm (with addition of optional firestat)
• Smoke Detector Alarm (with addition of optional smoke detector)
• Humidifier Change Canister Alarm
• Water Underfloor Alarm (with addition of water detector)
• Additional Common Alarm
Redundant group control. Allows up to six NetworkAIR units the ability
to communicate with each other to automatically switch upon alarm
condition, or timed rotation. Can also allow standby units the ability to assist
the running system.
Remote display panel. The microprocessor controller allows facility or
building-maintenance personnel to evaluate and control the unit from up to
50 ft. away from the unit, without having to enter the secured space.
Remote sensor(s). Environmental sensors can be strategically placed, up to
50 ft. from the unit to better meet the site’s cooling needs. The sensor must be
positioned to permit air movement across the sensors.
Monitoring system. A PC-based monitoring application which provides
single terminal monitoring and control for up to 120 units. The Windowsbased operated program (except Windows NT) has status screens for
individual unit conditions, mode of operation and alarms. The system
graphically presents temperature and relative humidity over time.
Temperature, relative humidity, alarm history, and other readings are stored
for future use.
Environmental monitoring unit. A stand-alone unit which performs
continuous temperature and humidity sensing through two available probes
(one included) and contact monitoring. The unit is controlled by available
web, control console, or SNMP interface with network connection. In the
event of an environmental anomaly, notification is sent to the customer via email or SNMP. The unit is 18.25" × 9" × 2.75" (464 mm × 229 mm × 70 mm)
and sits in or on top of a rack. The probes extend up to 12' (3.66 m) from the
unit.
14
APC NetworkAIR AFX Series: Optional Features
Reheat
Hot water or steam reheat. An on/off solenoid valve for steam reheat, or a
modulating valve for hot water reheat maintains the dry bulb temperature
when the system is in dehumidification and heat mode. Completely factory
pre-piped, the system includes a copper tube, aluminum-fin reheat coil,
solenoid valve, float, and thermostatic and steam trap for steam reheat only.
Hot gas reheat. The copper tube, aluminum fin hot gas reheat coil
maintains the leaving dry bulb temperature when the system is in the
dehumidification mode. The coil is controlled by the microprocessor through
a factory-piped-and-wired three-way heat reclaim regulator and check valve
(water/glycol only).
System Components
Premium efficiency motor(s). High efficiency motors conserve energy
over periods of continuous fan operation.
High efficiency filter(s). Pleated final filters with an efficiency of 40% and
60% (ASHRAE 52.2), 4" (102 mm) deep, allow the removal of a greater
percentage of airborne particulate contaminates.
Prefilter(s). Intended to capture large airborne particulate contaminates,
thereby extending the life of the high-efficiency filter. Prefilters are 1" (25
mm) deep and easily disposable.
Condensate pump. The factory installed and wired condensate pump will
pump 36 gal/h (0.06 L/s) at 15 ft. (4.6 m) head.
High pressure water regulating valve(s). Water and glycol systems may
utilize an optional regulating valve, which operates with a maximum pressure
of 350 psi (2400 kPa), to automatically control condensing temperature.
Flared filter-drier connection. Flared threaded connections can be
provided on either side of the filter drier to expedite replacement.
Hot gas bypass. An auxiliary side-port hot gas bypass circuit. The
activation of the hot gas bypass circuit will maintain the evaporator coil
temperature during low load conditions. This optional feature will offer
longer compressor run times and minimize compressor cycling and
temperature fluctuations.
Pressure gauges. Suction and discharge pressure gauges may be provided
for the convenience of service personnel.
APC NetworkAIR AFX Series: Optional Features
15
Performance Specifications
Net cooling capacity—air/remote condensing
CAPACITY IN BTU/H
80° F DB, 67° F WB
Total (BTUH)
(26.7° C DB, 19.4° C WB)
(kW)
50% RH
Sensible (BTUH)
(kW)
75° F DB, 62.5° F WB
Total (BTUH)
(23.9° C DB, 16.9° C WB)
(kW)
50% RH
Sensible (BTUH)
(kW)
75° F DB, 61° F WB
Total (BTUH)
(23.9° C DB, 16.1° C WB)
(kW)
45% RH
Sensible (BTUH)
(kW)
72° F DB, 60° F WB
Total (BTUH)
(22.2° C DB, 15.5° C WB)
(kW)
50% RH
Sensible (BTUH)
(kW)
72° F DB, 58.6° F WB
Total (BTUH)
(22.2° C DB, 14.8° C WB)
(kW)
45% RH
Sensible (BTUH)
(kW)
70° F DB, 58.5° F WB
Total (BTUH)
(21.1° C DB, 14.8° C WB)
(kW)
50% RH
Sensible (BTUH)
(kW)
70° F DB, 57.2° F WB
Total (BTUH)
(21.1 C° DB, 14.0 C° WB)
(kW)
45% RH
Sensible (BTUH)
(kW)
6T
78,100
(22.9)
72,500
(21.2)
72,800
(21.3)
70,900
(20.8)
73,100
(21.4)
73,100
(21.4)
69,700
(20.4)
68,700
(20.1)
70,200
(20.6)
70,200
(20.6)
67,600
(19.8)
66,900
(19.6)
68,100
(19.9)
68,100
(19.9)
8T
111,000
(32.5)
89,000
(26.1)
103,100
(30.2)
88,000
(25.8)
101,700
(29.8)
95,000
(27.8)
98,800
(28.9)
86,000
(25.2)
97,600
(28.6)
92,500
(27.1)
96,000
(28.1)
84,400
(24.7)
95,000
(27.8)
90,400
(26.5)
10T
132,800
(38.9)
125,200
(36.7)
123,300
(36.1)
122,400
(35.8)
124,500
(36.5)
124,500
(36.5)
119,400
(35.0)
119,400
(35.0)
119,500
(35.0)
119,500
(35.0)
116,100
(34.0)
116,100
(34.0)
116,000
(34.0)
116,000
(34.0)
12T
147,200
(43.1)
134,200
(39.3)
136,300
(39.9)
131,800
(38.6)
137,000
(40.1)
137,000
(40.1)
130,300
(38.2)
127,800
(37.4)
131,700
(38.6)
131,700
(38.6)
126,800
(37.1)
125,300
(36.7)
128,100
(37.5)
128,100
(37.5)
MODEL
14T
158,000
(46.3)
151,700
(44.4)
148,900
(43.6)
148,900
(43.6)
149,000
(43.6)
149,000
(43.6)
143,000
(41.9)
143,000
(41.9)
143,000
(41.9)
143,000
(41.9)
139,100
(40.7)
139,100
(40.7)
139,100
(40.7)
139,100
(40.7)
18T
226,900
(66.4)
184,600
(54.1)
210,300
(61.6)
181,600
(53.2)
205,500
(60.2)
195,600
(57.3)
201,500
(59.0)
177,700
(52.0)
197,500
(57.8)
191,100
(56.0)
196,000
(57.4)
174,400
(51.1)
192,200
(56.3)
186,700
(54.7)
20T
267,300
(78.3)
239,800
(70.2)
248,700
(72.8)
237,300
(69.5)
251,500
(73.6)
251,500
(73.6)
238,800
(69.9)
231,200
(67.7)
242,200
(70.9)
242,200
(70.9)
232,400
(68.0)
226,300
(66.3)
236,000
(69.1)
236,000
(69.1)
26T
296,800
(86.9)
258,100
(75.6)
279,200
(81.8)
256,300
(75.0)
281,100
(82.3)
281,100
(82.3)
269,400
(78.9)
251,400
(73.6)
271,900
(79.6)
271,900
(79.6)
262,600
(76.9)
246,800
(72.3)
265,700
(77.8)
265,700
(77.8)
28T
329,600
(96.5)
283,300
(83.0)
305,000
(89.3)
277,900
(81.4)
308,200
(90.2)
308,200
(90.2)
292,700
(85.7)
272,700
(79.8)
296,500
(86.8)
296,500
(86.8)
284,300
(83.2)
266,200
(78.0)
288,400
(84.4)
288,400
(84.4)
*Performance Specifications @ 95° F Ambient (AIR/GLYCOL/RC) or @ 105° F Condensing (WATER)
APC NetworkAIR AFX Series: Performance Specifications
17
Net cooling capacity—water
MODEL
CAPACITY IN BTU/H
80° F DB, 67° F WB
Total (BTUH)
6T
8T
10T
12T
14T
18T
20T
26T
28T
85,500
121,000
144,600
160,700
171,300
246,200
298,500
340,000
361,500
(26.7°C DB, 19.4° C WB) (kW)
(25.0)
(35.4)
(42.3)
(47.1)
(50.2)
(72.1)
(87.4)
(99.6)
(105.9)
50% RH
Sensible (BTUH)
76,100
93,500
130,000
139,500
157,900
193,300
252,900
276,500
295,900
(kW)
(22.3)
(27.4)
(38.1)
(40.8)
(46.2)
(56.6)
(74.1)
(81.0)
(86.6)
75° F DB, 62.5° F WB
Total (BTUH)
79,100
111,800
133,100
147,800
158,000
226,800
283,500
312,100
332,400
(26.7° C DB, 19.4° C WB) (kW)
(23.2)
(32.7)
(39.0)
(43.3)
(46.3)
(66.4)
(83.0)
(91.4)
(97.3)
50% RH
74,300
92,200
127,200
137,300
154,000
189,500
222,800
271,500
290,600
75° F DB, 61° F WB
Sensible (BTUH)
(kW)
(21.8)
(27.0)
(37.2)
(40.2)
(45.1)
(55.5)
(65.2)
(79.5)
(85.1)
Total (BTUH)
73,557
110,000
125,928
147,800
152,460
222,000
281,200
304,600
324,400
(23.9° C DB, 16.1° C WB) (kW)
(21.5)
(32.2)
(36.9)
(43.3)
(44.6)
(65.0)
(82.3)
(89.2)
(95.0)
45% H
73,557
99,600
125,928
147,800
152,460
203,800
228,700
293,100
312,400
72° F DB, 60° F WB
Sensible (BTUH)
(kW)
(21.5)
(29.2)
(36.9)
(43.3)
(44.6)
(59.7)
(67.0)
(85.8)
(91.5)
Total (BTUH)
75,500
106,900
127,000
141,100
151,100
216,700
263,000
297,900
317,100
(22.2° C DB, 15.5° C WB) (kW)
(22.1)
(31.3)
(37.2)
(41.3)
(44.2)
(63.5)
(77.0)
(87.2)
(92.9)
50% RH
Sensible (BTUH)
72,300
90,100
123,600
133,900
149,800
185,300
242,800
265,900
283,400
(kW)
(21.2)
(26.4)
(36.2)
(39.2)
(43.9)
(54.3)
(71.1)
(77.9)
(83.0)
72° F DB, 58.6° F WB
Total (BTUH)
71,577
105,400
122,364
132,561
148,302
212,500
264,600
291,000
310,300
(22.2° C DB, 14.8° C WB) (kW)
(21.0)
(30.9)
(35.8)
(38.8)
(43.4)
(62.2)
(77.5)
(85.2)
(90.9)
45% RH
Sensible (BTUH)
71,577
97,000
122,364
132,561
148,302
198,800
264,600
284,300
304,200
(kW)
(21.0)
(28.4)
(35.8)
(38.8)
(43.4)
(58.2)
(77.5)
(83.2)
(89.1)
70° F DB, 58.5° F WB
Total (BTUH)
73,300
103,800
123,200
136,700
148,800
210,300
255,300
288,700
307,400
(22.2° C DB, 14.8° C WB) (kW)
(21.5)
(30.4)
(36.1)
(40.0)
(43.6)
(61.6)
(74.8)
(84.5)
(90.0)
50% RH
Sensible (BTUH)
71,300
88,400
121,000
130,800
148,800
181,700
237,500
260,000
277,700
(kW)
(20.9)
(25.9)
(35.4)
(38.3)
(43.6)
(53.2)
(69.5)
(76.1)
(81.3)
70° F DB, 57.2° F WB
Total (BTUH)
70,587
102,400
119,790
129,492
148,600
206,400
257,400
282,500
301,400
(22.2° C DB, 14.8° C WB) (kW)
(20.7)
(30.0)
(35.1)
(37.9)
(43.5)
(60.4)
(75.4)
(82.7)
(88.3)
45% RH
Sensible (BTUH)
70,587
94,600
119,790
129,492
148,600
193,900
257,400
277,200
296,700
(kW)
(20.7)
(27.7)
(35.1)
(37.9)
(43.5)
(56.8)
(75.4)
(81.2)
(86.9)
*Performance Specifications @ 95° F Ambient (AIR/GLYCOL/RC) or @ 105° F Condensing (WATER)
18
APC NetworkAIR AFX Series: Performance Specifications
Net cooling capacity—glycol
MODEL
CAPACITY IN BTU/H
6T
8T
10T
12T
14T
18T
20T
26T
28T
77,700
110,700
130,200
145,800
155,300
225,100
270,000
296,400
328,700
80° F DB, 67° F WB
Total (BTUH)
(26.7°C DB, 19.4°C WB)
(kW)
(22.8)
(32.4)
(38.1)
(42.7)
(45.5)
(65.9)
(79.1)
(86.8)
(96.2)
50% RH
Sensible (BTUH)
72,300
88,800
123,400
133,600
150,100
184,000
241,000
257,900
282,900
(kW)
(21.2)
(26.0)
(36.1)
(39.1)
(44.0)
(53.9)
(70.6)
(75.5)
(82.8)
75° F DB, 62.5° F WB
Total (BTUH)
71,900
102,000
121,600
133,900
145,800
206,800
256,400
274,400
302,100
(23.9°C DB, 16.9°C WB)
(kW)
(21.1)
(29.9)
(35.6)
(39.2)
(42.7)
(60.6)
(75.1)
(80.3)
(88.5)
50% RH
Sensible (BTUH)
70,300
87,400
121,600
130,600
145,800
179,900
210,600
251,800
277,500
(kW)
(20.6)
(25.6)
(35.6)
(38.2)
(42.7)
(52.7)
(61.7)
(73.7)
(81.3)
75° F DB, 61° F WB
Total (BTUH)
69,597
100,600
121,600
129,294
145,700
201,700
254,400
278,700
305,200
(23.9°C DB, 16.1°C WB)
(kW)
(20.4)
(29.5)
(35.6)
(37.9)
(42.7)
(59.1)
(74.5)
(81.6)
(89.4)
45% RH
Sensible (BTUH)
69,597
94,400
121,600
129,294
145,700
193,600
216,500
278,700
305,200
(kW)
(20.4)
(27.6)
(35.6)
(37.9)
(42.7)
(56.7)
(63.4)
(81.6)
(89.4)
72° F DB, 60° F WB
Total (BTUH)
69,000
97,300
116,100
127,500
139,300
197,200
237,700
266,400
285,400
(22.2°C DB, 15.5°C WB)
(kW)
(20.2)
(28.5)
(34.0)
(37.3)
(40.8)
(57.7)
(69.6)
(78.0)
(83.6)
50% RH
Sensible (BTUH)
69,000
85,300
116,100
125,500
139,300
175,500
230,600
251,800
265,100
(kW)
(20.2)
(25.0)
(34.0)
(36.7)
(40.8)
(51.4)
(67.5)
(73.7)
(77.6)
72° F DB, 58.6° F WB
Total (BTUH)
68,310
96,200
116,100
124,245
139,300
193,000
241,600
268,600
292,500
(22.2°C DB, 14.8°C WB)
(kW)
(20.0)
(28.2)
(34.0)
(36.4)
(40.8)
(56.5)
(70.7)
(78.6)
(85.6)
45% RH
Sensible (BTUH)
68,310
91,200
116,100
124,245
139,300
188,500
241,600
268,600
292,500
(kW)
(20.0)
(26.7)
(34.0)
(36.4)
(40.8)
(55.2)
(70.7)
(78.6)
(85.6)
70° F DB, 58.5° F WB
Total (BTUH)
66,900
94,400
112,500
125,200
135,100
191,100
230,600
259,300
278,600
(22.2°C DB, 14.8°C WB)
(kW)
(19.6)
(27.6)
(32.9)
(36.7)
(39.6)
(56.0)
(67.5)
(75.9)
(81.6)
50% RH
Sensible (BTUH)
66,900
83,500
112,500
125,200
135,100
171,900
225,300
247,100
265,100
(kW)
(19.6)
(24.4)
(32.9)
(36.7)
(39.6)
(50.3)
(66.0)
(72.4)
(77.6)
70° F DB, 57.2° F WB
Total (BTUH)
66,900
93,300
112,500
125,100
135,000
187,300
234,600
261,900
284,100
(22.2°C DB, 14.8°C WB)
(kW)
(19.6)
(27.3)
(32.9)
(36.6)
(39.5)
(54.8)
(68.7)
(76.7)
(83.2)
45% RH
Sensible (BTUH)
66,900
89,400
112,500
125,100
135,000
183,800
234,600
261,900
284,100
(kW)
(19.6)
(26.2)
(32.9)
(36.6)
(39.5)
(53.8)
(68.7)
(76.7)
(83.2)
*Performance Specifications @ 95° F Ambient (AIR/GLYCOL/RC) or @ 105° F Condensing (WATER)
APC NetworkAIR AFX Series: Performance Specifications
19
Performance Data
Air system
AIR/WATER/
GLYCOL/RC
MODEL
Air Volume (CFM)
(L/s)
Fan Motor HP (qty)
(kW)
External Static Pressure (inches)
(Pa)
Number of Fans
6T
8T
10T
12T
14T
18T
20T
26T
28T
4,200
4,400
7,000
7,200
8,400
8,800
12,600
13,200
14,200
(1,982)
(2,077)
(3,304)
(3,398)
(3,965)
(4,154)
(5,947)
(6,230)
(6,702)
3 (3)
3 (3)
3 (1)
3 (1)
3 (2)
3 (2)
3 (2)
3 (2)
(2.2) (1)
(2.2) (1)
(2.2) (2)
(2.2) (2)
(2.2) (2)
(2.2 (2)
(2.2) (3) (2.2) (3)
3 (3)
(2.2) (3)
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
(125)
(125)
(125)
(125)
(125)
(125)
(125)
(125)
(125)
1
1
2
2
2
2
3
3
3
Coolant requirements
WATER
MODEL
65° F Water In (GPM)
(18.3° C) (L/s)
Pressure Drop (psig)
(kPa)
THR (MBH)
(kW)
75° F Water In (GPM)
(23.9 °C)(L/s)
Pressure Drop (psig)
6T
8T
10T
12T
14T
18T
20T
26T
28T
6.2
8.9
10.1
11.7
11.4
17.9
20.2
23.1
23.4
(0.4)
(0.6)
(0.6)
(0.7)
(1.7)
(1.1)
(1.3)
(1.5)
(1.5)
3.2
4.9
4.8
3.8
2.9
4.8
4.9
4.6
4.7
(22.1)
(33.8)
(33.1)
(26.2)
(20.0)
(33.1)
(33.8)
(31.7)
(32.9)
114,435
160,827
195,092
216,444
228,736
323,814
374,456
444,410
456,066
(33.5)
(47.1)
(57.1)
(63.4)
(67.0)
(94.8)
(109.6)
(130.1)
(133.5)
8.3
11.8
13.4
15.6
15.2
23.9
26.9
30.8
31.2
(0.5)
(0.7)
(0.8)
(1.0)
(1.0)
(1.5)
(1.7)
(1.9)
(2.0)
5.7
8.7
8.6
6.7
5.2
8.6
8.7
8.1
8.3
(39.3)
(60.0)
(59.3)
(96.2)
(35.9)
(59.3)
(60.0)
(55.9)
(57.2)
114,435
160,827
195,092
216,444
228,736
323,814
374,456
444,410
456,066
(33.5)
(47.1)
(57.1)
(63.4)
(67.0)
(94.8)
(109.6)
(130.1)
(133.5)
85° F Water In (GPM)
18.6
25.7
28.4
33.8
30.7
52.1
58.1
65.8
69.3
(29.4 °C) (L/s)
(1.2)
(1.6)
(1.8)
(2.1)
(1.9)
(3.3)
(3.7)
(4.2)
(4.4)
(kPa)
THR (MBH)
(kW)
Pressure Drop (psig)
27.3
39.9
37.6
30.1
20.8
39.3
39.4
36.1
39.9
(kPa)
(188.3)
(275.1)
(259.3)
(207.6)
(143.9)
(271.0)
(271.7)
(249.0)
(275.2)
THR (MBH)
114,435
160,827
195,092
216,444
228,736
323,814
374,456
444,410
456,066
(33.5)
(47.1)
(57.1)
(63.4)
(67.0)
(94.8)
(109.6)
(130.1)
(133.5)
(kW)
GLYCOL
105° F Glycol In (GPM)
17.5
25.2
31.0
31.7
34.9
50.8
61.4
66.9
67.8
(40.6 °C) (L/s)
(1.1)
(1.6)
(2.0)
(2.0)
(2.2)
(3.2)
(3.9)
(4.2)
(4.3)
Pressure Drop (psig)
(kPa)
THR (MBH)
(kW)
12.0
21.5
26.2
26.1
9.3
11.0
11.8
10.2
10.5
(82.8)
(148.3)
(180.7)
(180.0)
(64.1)
(75.9)
(81.4)
(70.3)
(72.4)
110,543
156,191
188,188
208,802
220,638
313,448
361,520
432,200
442,906
(32.4)
(45.7)
(55.1)
(61.1)
(64.6)
(91.8)
(105.9)
(126.6)
(129.7)
28T
Pump system
GLYCOL
6T
8T
10T
12T
14T
18T
20T
26T
Horsepower
MODEL
3/4
3/4
1
1
1
1-1/2
2
3
3
Total Head (feet) (@ design GPM)
62
59
69
68
65
65
80
92
92
(18.9)
(18.0)
(21.0)
(20.7)
(19.8)
(19.8)
(24.4)
(28.0)
(28.0)
28
33
27
26
37
37
51
62
61
(8.5)
(10.1)
(8.2)
(7.9)
(11.3)
(11.3)
(15.5)
(18.9)
(18.6)
(m)
Available Ext. Head (feet)
(m)
APC NetworkAIR AFX Series: Performance Data
21
Water regulating valve–2-Way/3-Way, single seated
WATER/
GLYCOL
MODEL
Size (inches - NPT)
6T
8T
10T
12T
14T
18T
20T
26T
28T
1-1/4
1-1/4
3/4 (2)
3/4 (2)
1 (2)
1-1/4 (2)
1-1/4 (2)
1-1/2 (2)
1-1/2 (2)
14
14
20
20
28
28
40
40
40
Cv
*2-Way/3-Way Single Seated, 150 psig W.W.P. max
Humidification—solid state electrode canister
AIR/WATER/
GLYCOL/RC
MODEL
Flush Cycle
6T
8T
10T
12T
14T
18T
20T
26T
28T
automatic
automatic
automatic
automatic
automatic
automatic
automatic
automatic
automatic
Lbs/hr.
10
10
10
10
10
10
20
20
20
(Kg/hr.)
(4.5)
(4.5)
(4.5)
(4.5)
(4.5)
(4.5)
(9.0)
(9.0)
(9.0)
3.4
3.4
3.4
3.4
3.4
3.4
6.8
6.8
6.8
kW
Filters
AIR/WATER/
GYLCOL/RC
MODEL
6T
Quantity
Size (inches) Downflow
(mm)
Size (inches) Upflow
(mm)
8T
10T
12T
14T
18T
20T
26T
28T
1
1
2
2
2
2
3
3
3
30.5 x 30.5
30.5 x 30.5
30.5 x 30.5
30.5 x 30.5
30.5 x 30.5
30.5 x 30.5
30.5 x 30.5
30.5 x 30.5
30.5 x 30.5
(774.7 ×
774.7)
(774.7 ×
74.7)
(774.7 ×
774.7)
(774.7 ×
774.7)
(774.7 ×
774.7)
(774.7 ×
774.7)
(774.7 ×
774.7)
(774.7 ×
774.7)
(774.7 ×
774.7)
27.0 × 35.5
27.0 × 35.5
27.0 × 35.5
27.0 × 35.5
27.0 × 35.5
27.0 × 35.5
27.0 × 35.5
27.0 × 35.5
27.0 × 35.5
(685.8 ×
901.7)
(685.8 ×
901.7)
(685.8 ×
901.7)
(685.8 ×
901.7)
(685.8 ×
901.7)
(685.8 ×
901.7)
(685.8 ×
901.7)
(685.8 ×
901.7)
(685.8 ×
901.7)
Depth (inches)
(mm)
4
4
4
4
4
4
4
4
4
(101.6)
(101.6)
(101.6)
(101.6)
(101.6)
(101.6)
(101.6)
(101.6)
(101.6)
26T
28T
*30% efficient, ASHRAE Standard 52.1-92, UL Class 2
Evaporator coil
AIR/WATER/
GLCOL/RC
MODEL
6T
Face Area (ft2)
(m
2)
10T
12T
14T
18T
20T
9.5
9.5
21.3
21.3
21.3
21.3
33.0
33.0
33.0
(0.88)
(0.88)
(1.98)
(1.98)
(1.98)
(1.98)
(3.07)
(3.07)
(3.07)
Rows Deep
4
4
4
4
4
4
4
4
4
442
463
329
338
394
413
382
400
430
(2.25)
(2.35)
(1.67)
(1.72)
(2.00)
(2.10)
(1.94)
(2.03)
(2.18)
18T
20T
26T
28T
Face Velocity (FPM)
(m/s)
8T
Compressor—scroll
AIR/WATER/
GLYCOL/RC
MODEL
6T
8T
10T
12T
14T
EER—Air
13.6
13.0
13.5
13.3
13.6
13.0
13.1
13.2
13.1
EER—Water
17.3
16.3
17.6
16.8
17.3
16.3
16.5
16.6
16.7
EER—Glycol
12.5
12.11
12.3
12.2
12.5
12.1
12.1
12.2
12.13
1
1
2
2
2
2
2
2
2
Quantity
22
APC NetworkAIR AFX Series: Performance Data
Electric Reheat
AIR/WATER/
GLYCOL/RC
MODEL
6T
8T
10T
12T
14T
18T
20T
26T
28T
MBH total (includes motor heat)
28.4
28.4
56.8
56.8
56.8
56.8
85.1
85.1
85.1
(kW)
(8.3)
(8.3)
(16.6)
(16.6)
(16.6)
(16.6)
(24.9)
(24.9)
(24.9)
Stages
1
1
2
2
2
2
2
2
2
*With equal loading on each phase, rated at 240V/3Ø and 480V/3Ø
Hot gas reheat
WATER/GLYCOL MODEL
MBH (includes motor heat)
(kW)
6T
8T
10T
12T
14T
18T
20T
26T
28T
26.3
32.8
83.0
91.2
92.8
92.8
146.8
146.8
146.8
(7.71)
(9.62)
(24.30)
(26.70)
(27.20)
(27.20)
(43.05)
(43.05)
(43.05)
6T
8T
12T
14T
18T
20T
26T
28T
Hot water reheat
AIR/WATER/
GLYCOL/RC
MODEL
MBH (includes motor heat)
(kW)
10T
81.6
89.5
138.2
151.7
163.0
193.1
250.7
272.1
303.4
(23.93)
(26.24)
(40.52)
(44.48)
(47.80)
(56.63)
(73.52)
(79.79)
(88.97)
GPM
3.0
4.6
2.5
3.0
3.5
5.5
5.0
6.0
8.0
(L/s)
(0.19)
(0.29)
(0.16)
(0.19)
(0.22)
(0.34)
(0.31)
(0.37)
(0.50)
Pressure Drop (psig)
2.7
3.4
3.0
3.5
3.9
6.2
7.4
9.5
14.4
(18.0)
(22.6)
(20.0)
(23.3)
(26.0)
(41.3)
(49.3)
(63.3)
(96.0)
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
8T
10T
12T
14T
(kPa)
Control Valve
*Entering water temperature – 180° F (82.2° C)
Steam reheat
AIR/WATER/
GLYCOL/RC
MODEL
6T
MBH (includes motor heat)
18T
20T
26T
28T
79.3
86.9
133.7
143.3
163.5
188.4
242.8
272.6
297.5
(kW)
(23.25)
(25.48)
(39.21)
(42.02)
(47.94)
(55.25)
(71.20)
(79.94)
(87.24)
Control Valve
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
solenoid
*5 psig (34.5 KP2) saturated supply
Drycooler
GLYCOL
6T
8T
10T
12T
14T
18T
20T
26T
GPM
MODEL
18
25
31
32
35
51
61
67
68
(L/S)
(1.1)
(1.6)
(2.0)
(2.0)
(2.2)
(3.2)
(3.8)
(4.2)
(4.3)
Pressure Drop (psig)
(kPa)
28T
9.1
6.1
6.5
6.9
8.2
7.4
7.4
8.7
8.7
(62.7)
(42.1)
(44.8)
(47.6)
(56.6)
(51.0)
(51.0)
(60.0)
(60.0)
Centrifugal indoor condenser
6T
8T
10T
12T
14T
18T
20T
26T
28T
Air Quantity - CFM
AIR
MODEL
5,000
5,500
7,000
8,000
9,000
11,000
13,000
14,000
15,000
(L/s)
(2380)
(2619)
(3333)
(3809)
(4286)
(5238)
(6191)
(6666)
(7143)
3 (1)
3 (1)
3 (2)
3 (2)
3 (2)
3 (2)
3 (3)
3 (3)
3 (3)
(2.2) (1)
(2.2) (1)
(2.2) (2)
(2.2) (2)
(2.2) (2)
(2.2) (2)
(2.2) (3)
(2.2) (3)
(2.2) (3)
Fan Motor HP (qty)
(kW)
Blower and Motor Quantity
External Static Pressure (inches)
(Pa)
1
1
2
2
2
2
3
3
3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
(125)
(125)
(125)
(125)
(125)
(125)
(125)
(125)
(125)
APC NetworkAIR AFX Series: Performance Data
23
Physical data
AIR
MODEL
Height (inches)
(mm)
Length (inches)
(mm)
Depth (inches)
(mm)
6T
8T
10T
12T
14T
18T
20T
26T
76
76
76
76
76
76
76
76
28T
76
(1930)
(1930)
(1930)
(1930)
(1930)
(1930)
(1930)
(1930)
(1930)
34.38
34.38
66.35
66.35
66.35
66.35
98.32
98.32
98.32
(873.25)
(873.25)
(1685.29)
(1685.29)
(1685.29)
(1685.29)
(2997.33)
(2997.33)
(2997.33)
34.38
34.38
34.38
34.38
34.38
34.38
34.38
34.38
34.38
(873.25)
(873.25)
(873.25)
(873.25)
(873.25)
(873.25)
(873.25)
(873.25)
(873.25)
Weight (lbs)
850
975
1,175
1,250
1,400
1,550
1,750
1,900
2,100
(Approx. kg)
(386)
(442)
(533)
(567)
(635)
(703)
(794)
(862)
(953)
Weight (Lbs)
1,000
1,050
1,800
1,850
1,900
1,950
2,650
2,700
2,750
(Approx. kg)
(454)
(477)
(818)
(841)
(863)
(886)
(1204)
(1227)
(1250)
WATER/GLYCOL
Unit Volume (gallons)
(Liters)
1
1
2
2
2
2
3
3
3
(3.78)
(3.78)
(7.56)
(7.56)
(7.56)
(7.56)
(11.34)
(11.34)
(11.34)
REMOTE CONDENSING – INDOOR UNITS
Weight (lbs)
870
920
1,550
1,600
1,650
1,700
2,250
2,300
2,350
(Approx. kg)
(395)
(418)
(704)
(727)
(750)
(773)
(1023)
(1045)
(1068)
Connection sizes
AIR/REMOTE
CONDENSING
MODEL
Liquid Line (inches)
6T
8T
10T
12T
14T
18T
20T
26T
28T
ODS
1/2
5/8
1/2
1/2
5/8
5/8
5/8
5/8
5/8
ODS
5/8
1-1/8
5/8
5/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
ODS
7/8
1-1/8
7/8
7/8
7/8
1-1/8
1-3/8
1-3/8
1-3/8
ODS
1-3/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-5/8
2-1/8
2-1/8
AIR
Discharge Line (inches)
REMOTE CONDENSING
Suction Line (inches)
WATER/GLYCOL
Water/Glycol In/Out (inches)
AIR/WATER/GLYCOL/RC
Condensate Drain (inches)
IDS
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
Humidifier Line (inches)
ODF
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Hot Water In/Out (inches)
ODS
5/8
5/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
Steam Reheat In/Out (inches)
ODS
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
24
APC NetworkAIR AFX Series: Performance Data
Electrical Data
Electric Reheat—6–14 ton
HUMIDIFIER
VOLTAGE
6T
FLA
WSA
MOP
8T
FLA
WSA
MOP
10T
FLA
WSA
MOP
12T
FLA
WSA
MOP
14T
FLA
WSA
MOP
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
FLA= Full Load Amperes
208
42.4
40.1
43.9
40.8
55.2
55.2
55.2
51.0
70.0
70.0
70.0
50.0
51.1
47.9
53.2
40.8
71.3
71.3
71.3
51.0
100.0
100.0
100.0
50.0
64.5
64.5
64.5
65.2
81.5
81.5
81.5
81.5
90.0
90.0
90.0
70.0
66.9
64.5
69.7
65.2
84.7
84.7
84.7
81.5
100.0
100.0
100.0
70.0
68.4
64.8
71.4
65.2
84.7
84.7
84.7
81.5
100.0
100.0
100.0
70.0
Electric
230
42.4
40.1
43.9
40.0
55.4
55.4
55.4
50.0
70.0
70.0
70.0
50.0
51.1
47.9
53.2
40.0
71.5
71.5
71.5
50.0
100.0
100.0
100.0
50.0
64.5
64.5
65.1
65.2
83.1
83.1
83.1
81.5
90.0
90.0
90.0
70.0
66.5
64.5
67.9
65.2
84.9
84.9
84.9
81.5
90.0
90.0
90.0
70.0
67.4
65.1
68.9
65.2
84.9
84.9
84.9
81.5
90.0
90.0
90.0
70.0
460
21.1
20.0
21.9
20.0
27.3
27.3
27.3
25.0
35.0
35.0
35.0
25.0
25.5
23.9
27.0
20.0
36.4
36.4
36.4
25.0
50.0
50.0
50.0
25.0
31.9
31.9
32.2
32.6
42.0
42.0
42.0
40.8
45.0
45.0
45.0
35.0
32.3
31.9
33.1
32.6
42.0
42.0
42.0
40.8
45.0
45.0
45.0
35.0
33.5
32.4
34.3
32.6
42.0
42.0
42.0
40.8
45.0
45.0
45.0
35.0
575
17.5
16.5
18.1
16.7
22.8
22.8
22.8
20.9
30.0
30.0
30.0
25.0
21.0
19.7
21.8
16.7
29.5
29.5
29.5
20.9
45.0
45.0
45.0
20.0
26.7
26.7
26.9
27.4
35.0
35.0
35.0
34.3
35.0
35.0
35.0
30.0
26.7
26.7
27.2
27.4
35.4
35.4
35.4
34.3
35.0
35.0
35.0
30.0
28.0
27.0
28.6
27.4
35.4
35.4
35.4
34.3
35.0
35.0
35.0
45.0
208
41.6
39.3
43.1
24.4
54.2
54.2
54.2
30.5
70.0
70.0
70.0
35.0
50.3
47.1
52.4
24.4
70.3
70.3
70.3
30.5
100.0
100.0
100.0
30.0
62.0
59.7
63.5
48.8
80.7
80.7
80.7
61.0
90.0
90.0
90.0
50.0
64.9
62.8
66.3
48.8
82.5
82.5
82.5
61.0
90.0
90.0
90.0
50.0
65.8
63.5
67.3
48.8
82.5
82.5
82.5
61.0
90.0
90.0
90.0
50.0
Steam or None
230
460
42.4
21.1
40.1
20.0
43.9
21.9
25.2
12.6
55.4
27.3
55.4
27.3
55.4
27.3
31.5
15.8
70.0
35.0
70.0
35.0
70.0
35.0
35.0
15.0
51.1
25.5
47.9
23.9
53.2
27.0
25.2
12.6
71.5
36.4
71.5
36.4
71.5
36.4
31.5
15.8
100.0
50.0
100.0
50.0
100.0
50.0
35.0
15.0
63.6
31.5
61.3
30.3
65.1
32.2
50.4
25.2
83.1
42.0
83.1
42.0
83.1
42.0
63.0
31.5
90.0
45.0
90.0
45.0
90.0
45.0
60.0
30.0
66.5
32.3
64.4
31.1
67.9
33.1
50.4
25.2
84.9
42.0
84.9
42.0
84.9
42.0
63.0
31.5
90.0
45.0
90.0
45.0
90.0
45.0
60.0
30.0
67.4
33.5
65.1
32.4
68.9
34.3
50.4
25.2
84.9
42.0
84.9
42.0
84.9
42.0
63.0
31.5
90.0
45.0
90.0
45.0
90.0
45.0
60.0
30.0
575
17.5
16.5
18.1
10.7
22.8
22.8
22.8
13.4
25.0
25.0
25.0
15.0
21.0
19.7
21.8
10.7
29.5
29.5
29.5
13.4
40.0
40.0
40.0
15.0
26.3
25.4
26.9
21.4
35.0
35.0
35.0
26.8
35.0
35.0
35.0
25.0
26.6
25.7
27.2
21.4
35.4
35.4
35.4
26.8
35.0
35.0
35.0
25.0
28.0
27.0
28.6
21.4
35.4
35.4
35.4
26.8
35.0
35.0
35.0
25.0
MOP=Maximum Overcurrent Protection
WSA=Wire Size Ampere
*Values are calculated based on 3– phase power
APC NetworkAIR AFX Series: Electrical Data
25
Electric Reheat—18–28 ton
HUMIDIFIER
Electric
VOLTAGE
18T
FLA
WSA
MOP
20T
FLA
WSA
MOP
26T
FLA
WSA
MOP
28T
FLA
WSA
MOP
230
460
575
Air
85.7
82.5
41.1
32.9
74.5
76.1
37.9
31.5
Water
79.3
76.1
37.9
30.3
71.3
72.9
36.3
30.2
Glycol
89.9
86.7
44.1
34.5
76.6
78.2
39.4
32.3
Remote Condensing
65.2
65.2
32.6
27.4
48.8
50.4
25.2
21.4
Air
113.7
110.1
56.2
44.3
98.6
101.0
51.1
42.0
Water
113.7
110.1
56.2
44.3
98.6
101.0
51.1
42.0
Glycol
113.7
110.1
56.2
44.3
98.6
101.0
51.1
42.0
Remote Condensing
81.5
81.5
40.8
34.3
61.5
63.0
31.5
26.8
Air
125.0
125.0
70.0
50.0
125.0
125.0
60.0
50.0
Water
125.0
125.0
70.0
50.0
125.0
125.0
60.0
50.0
Glycol
125.0
125.0
70.0
50.0
125.0
125.0
60.0
50.0
Remote Condensing
70.0
70.0
35.0
30.0
50.0
60.0
30.0
25.0
Air
104.8
105.0
52.2
43.5
102.6
105
52.2
43.5
208
230
460
575
Water
98.6
101.0
50.2
41.9
98.6
101.0
50.2
41.9
Glycol
110.0
107.6
53.5
44.5
105.2
107.6
53.5
44.5
Remote Condensing
92.2
92.6
46.3
39.0
73.2
75.6
37.8
32.1
Air
144.7
141.0
68.3
55.0
137.4
141.0
68.3
55.0
Water
144.7
141.0
68.3
55.0
137.4
141.0
68.3
55.0
Glycol
144.7
141.0
68.3
55.0
137.4
141.0
68.3
55.0
40.1
Remote Condensing
115.3
115.8
57.9
48.8
91.5
94.5
47.3
Air
175.0
175.0
80.0
60.0
150.0
150.0
80.0
60.0
Water
175.0
175.0
80.0
60.0
150.0
150.0
80.0
60.0
Glycol
175.0
175.0
80.0
60.0
150.0
150.0
80.0
60.0
Remote Condensing
100.0
100.0
50.0
40.0
80.0
80.0
40.0
35.0
Air
118.9
108.6
54.2
45.1
109.7
108.6
54.2
45.1
Water
110.5
104.8
52.3
43.6
105.5
104.8
52.3
43.6
Glycol
122.4
110.6
55.2
45.7
111.5
110.2
55.0
45.7
Remote Condensing
92.2
92.6
46.3
39.0
73.2
75.6
37.8
32.1
Air
156.1
151.2
68.8
57.5
143.8
147.4
68.8
57.5
Water
156.1
151.2
68.8
57.5
143.8
147.4
68.8
57.5
Glycol
156.1
151.2
68.8
57.5
143.8
147.4
68.8
57.5
40.1
Remote Condensing
115.3
115.8
57.9
48.8
91.5
94.5
47.3
Air
175.0
175.0
80.0
60.0
175.0
175.0
80.0
60.0
Water
175.0
175.0
80.0
60.0
175.0
175.0
80.0
60.0
Glycol
175.0
175.0
80.0
60.0
175.0
175.0
80.0
60.0
Remote Condensing
100.0
100.0
50.0
40.0
80.0
80.0
40.0
35.0
Air
115.2
107.1
53.5
44.7
108.1
107.1
53.5
44.7
Water
107.7
103.7
51.8
43.3
104.3
103.7
51.8
43.3
Glycol
117.9
108.3
54.1
45.1
109.4
108.3
54.1
45.1
Remote Condensing
92.2
92.6
46.3
39.0
73.2
75.6
37.8
32.1
Air
156.1
151.2
78.9
63.0
143.8
147.4
75.5
62.6
Water
156.1
151.2
78.9
63.0
143.8
147.4
75.5
62.6
Glycol
156.1
151.2
78.9
63.0
143.8
147.4
75.5
62.6
Remote Condensing
115.3
115.8
57.9
48.8
91.5
94.5
47.3
40.1
Air
175.0
175.0
100.0
80.0
175.0
175.0
90.0
70.0
Water
175.0
175.0
100.0
80.0
175.0
175.0
90.0
70.0
Glycol
175.0
175.0
100.0
80.0
175.0
175.0
90.0
70.0
Remote Condensing
100.0
100.0
50.0
40.0
80.0
80.0
40.0
35.0
FLA= Full Load Amperes
26
Steam or None
208
MOP=Maximum Overcurrent Protection
WSA=Wire Size Amperes
*Values are calculated based on 3– phase power
APC NetworkAIR AFX Series: Electrical Data
Steam/hot water/or no-reheat—6–14 ton
HUMIDIFIER
VOLTAGE
6T
FLA
WSA
MOP
8T
FLA
WSA
MOP
10T
FLA
WSA
MOP
12T
FLA
WSA
MOP
14T
FLA
WSA
MOP
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
Air
Water
Glycol
Remote Condensing
FLA= Full Load Amperes
208
42.4
40.1
43.9
25.2
55.2
55.2
55.2
31.5
70.0
70.0
70.0
35.0
51.1
47.9
53.2
25.2
71.3
71.3
71.3
31.5
100.0
100.0
100.0
35.0
61.1
56.5
64.1
34.0
81.5
81.5
81.5
42.5
90.0
90.0
90.0
45.0
66.9
62.7
69.7
34.0
84.7
84.7
84.7
42.5
100.0
100.0
100.0
45.0
68.4
63.8
71.4
34.0
84.7
84.7
84.7
42.5
100.0
100.0
100.0
45.0
Electric
230
40.0
37.7
41.5
22.8
52.4
52.4
52.4
28.5
60.0
60.0
60.0
30.0
48.7
45.5
50.8
22.8
68.5
68.5
68.5
28.5
90.0
90.0
90.0
30.0
57.9
53.3
60.9
30.8
77.9
77.9
77.9
38.5
90.0
90.0
90.0
40.0
63.7
59.5
66.5
30.8
81.1
81.1
81.1
38.5
90.0
90.0
90.0
40.0
65.2
60.6
68.2
30.8
81.1
81.1
81.1
38.5
90.0
90.0
90.0
40.0
460
19.9
18.8
20.7
11.4
25.8
25.8
25.8
14.3
30.0
30.0
30.0
15.0
24.3
22.7
25.8
11.4
34.9
34.9
34.9
14.3
50.0
50.0
50.0
15.0
28.7
26.3
30.1
15.4
39.8
39.8
39.8
19.3
45.0
45.0
45.0
20.0
30.3
27.9
31.9
15.8
39.8
39.8
39.8
19.3
45.0
45.0
45.0
20.0
32.4
30.2
34.0
15.4
39.8
39.8
39.8
19.3
45.0
45.0
45.0
20.0
575
16.0
15.0
16.6
9.2
21.0
21.0
21.0
11.5
25.0
25.0
25.0
15.0
19.5
18.2
20.3
9.2
27.6
27.6
27.6
11.5
35.0
35.0
35.0
15.0
22.9
21.1
24.1
12.4
31.6
31.6
31.6
15.5
35.0
35.0
35.0
15.0
23.5
21.7
24.7
12.4
32.4
32.4
32.4
15.5
35.0
35.0
35.0
15.0
26.0
24.0
27.2
12.4
32.4
32.4
32.4
15.5
35.0
35.0
35.0
15.0
208
26.0
23.7
27.5
8.8
34.7
34.7
34.7
11.0
50.0
50.0
50.0
15.0
34.7
31.5
36.8
8.8
50.8
50.8
50.8
11.0
80.0
80.0
80.0
15.0
44.7
40.1
47.7
17.6
61.0
61.0
61.0
22.0
80.0
80.0
80.0
25.0
50.5
46.3
53.3
17.6
64.2
64.2
64.2
22.0
100.0
100.0
100.0
25.0
52.0
47.4
55.0
17.6
64.2
64.2
64.2
22.0
80.0
80.0
80.0
25.0
Steam or None
230
460
25.2
12.5
22.9
11.4
26.7
13.3
8.0
4.0
33.9
16.5
33.9
16.5
33.9
16.5
10.0
5.0
50.0
25.0
50.0
25.0
50.0
25.0
15.0
15.0
33.9
16.9
30.7
15.3
36.0
18.4
8.0
4.0
50.0
25.6
50.0
25.6
50.0
25.6
10.0
5.0
80.0
40.0
80.0
40.0
80.0
40.0
15.0
15.0
43.1
21.3
38.5
18.9
46.1
22.7
16.0
8.0
59.4
30.5
59.4
30.5
59.4
30.5
20.0
10.0
70.0
40.0
70.0
40.0
70.0
40.0
25.0
15.0
48.9
22.9
44.7
20.5
51.7
24.5
16.0
8.0
62.6
30.5
62.6
30.5
62.6
30.5
20.0
10.0
80.0
40.0
80.0
40.0
80.0
40.0
25.0
15.0
50.4
25.0
45.8
22.8
53.4
26.6
16.0
8.0
62.6
30.5
62.6
30.5
62.6
30.5
20.0
10.0
80.0
40.0
80.0
40.0
80.0
40.0
25.0
15.0
575
10.0
9.0
10.6
3.2
13.5
13.5
13.5
4.0
20.0
20.0
20.0
15.0
13.5
12.2
14.3
3.2
20.1
20.1
20.1
4.0
30.0
30.0
30.0
15.0
16.9
15.1
18.1
6.4
24.1
24.1
24.1
8.0
30.0
30.0
30.0
15.0
17.5
15.7
18.7
6.4
24.9
24.9
24.9
8.0
30.0
30.0
30.0
15.0
20.0
18.0
21.2
6.4
24.9
24.9
24.9
8.0
30.0
30.0
30.0
15.0
MOP=Maximum Overcurrent Protection
WSA=Wire Size Amperes
*Values are calculated based on 3– phase power
APC NetworkAIR AFX Series: Electrical Data
27
Steam/hot water/or no-reheat—18–28 ton
HUMIDIFIER
Electric
VOLTAGE
18T
FLA
WSA
MOP
20T
FLA
WSA
MOP
26T
FLA
WSA
MOP
28T
FLA
WSA
MOP
Air
230
460
575
208
230
460
575
85.7
82.5
41.1
32.9
69.3
67.7
33.7
26.9
Water
79.3
76.1
37.9
30.3
62.9
61.3
30.5
24.3
Glycol
89.9
86.7
44.1
34.5
73.5
71.9
36.7
28.5
Remote Condensing
34.0
30.8
15.4
12.4
17.6
16.0
8.0
6.4
Air
113.7
110.1
56.2
44.3
93.2
91.6
46.9
36.8
Water
113.7
110.1
56.2
44.3
93.2
91.6
46.9
36.8
Glycol
113.7
110.1
56.2
44.3
93.2
91.6
46.9
36.8
Remote Condensing
42.5
38.5
19.3
15.5
22.0
20.0
10.0
8.0
Air
125.0
125.0
70.0
50.0
125.0
125.0
60.0
50.0
Water
125.0
125.0
70.0
50.0
125.0
125.0
60.0
50.0
Glycol
125.0
125.0
70.0
50.0
125.0
125.0
60.0
50.0
15.0
Remote Condensing
45.0
40.0
20.0
15.0
25.0
25.0
15.0
Air
104.8
100.4
49.9
39.9
85.8
83.4
41.4
33.0
Water
96.8
92.4
45.9
36.7
77.8
75.4
37.4
29.8
Glycol
110.0
105.6
52.5
41.9
91.0
88.6
44.0
35.0
Remote Condensing
45.4
41.0
20.5
16.5
26.4
24.0
12.0
9.6
Air
144.7
139.8
65.8
49.3
120.9
118.5
55.2
40.7
Water
144.7
139.8
65.8
49.3
120.9
118.5
55.2
40.7
Glycol
144.7
139.8
65.8
49.3
120.9
118.5
55.2
40.7
Remote Condensing
56.8
51.3
25.6
20.6
33.0
30.0
15.0
12.0
Air
175.0
175.0
80.0
80.0
150.0
150.0
70.0
50.0
Water
175.0
175.0
80.0
80.0
150.0
150.0
70.0
50.0
Glycol
175.0
175.0
80.0
80.0
150.0
150.0
70.0
50.0
15.0
Remote Condensing
50.0
50.0
25.0
20.0
35.0
30.0
15.0
Air
118.9
107.4
53.6
42.8
99.9
90.4
45.1
35.9
Water
110.5
99.8
49.8
39.8
91.5
82.8
41.3
32.9
Glycol
122.4
110.6
55.2
44.1
103.4
93.6
46.7
37.2
Remote Condensing
45.4
41.0
20.5
16.5
26.4
24.0
12.0
9.6
Air
156.1
151.2
66.7
53.8
132.4
130.0
56.1
45.2
Water
156.1
151.2
66.7
53.8
132.4
130.0
56.1
45.2
Glycol
156.1
151.2
66.7
53.8
132.4
130.0
56.1
45.2
Remote Condensing
56.8
51.3
25.6
20.6
33.0
33.0
15.0
12.0
Air
175.0
175.0
80.0
80.0
175.0
175.0
70.0
60.0
Water
175.0
175.0
80.0
80.0
175.0
175.0
70.0
60.0
Glycol
175.0
175.0
100.0
80.0
175.0
175.0
90.0
70.0
15.0
Remote Condensing
50.0
50.0
25.0
20.0
35.0
30.0
15.0
Air
115.2
104.1
52.0
41.7
96.2
87.1
43.5
34.8
Water
107.7
97.3
48.6
39.0
88.7
80.3
40.1
32.1
Glycol
117.9
106.5
53.2
42.7
98.9
89.5
44.7
35.8
Remote Condensing
45.4
41.0
20.5
16.5
26.4
24.0
12.0
9.6
Air
156.1
151.2
78.9
63.0
132.4
130.0
68.3
54.4
Water
156.1
151.2
78.9
63.0
132.4
130.0
68.3
54.4
Glycol
156.1
151.2
78.9
63.0
132.4
130.0
68.3
54.4
Remote Condensing
56.8
51.3
25.6
20.6
33.0
30.0
15.0
12.0
Air
175.0
175.0
100.0
100.0
175.0
175.0
90.0
70.0
Water
175.0
175.0
100.0
100.0
175.0
175.0
90.0
70.0
Glycol
175.0
175.0
100.0
100.0
175.0
175.0
90.0
70.0
Remote Condensing
50.0
50.0
25.0
20.0
35.0
30.0
15.0
15.0
FLA= Full Load Amperes
28
Steam or None
208
MOP=Maximum Overcurrent Protection
WSA=Wire Size Amperes
*Values are calculated based on 3– phase power
APC NetworkAIR AFX Series: Electrical Data
Indoor centrifugal condenser units
VOLTAGE
6T
8T
10T
12T
14T
18T
20T
26T
28T
208
230
460
FLA
8.6
8.4
4.2
575
3.6
WSA/MCA
10.8
10.5
5.3
4.5
MOP
15.0
15.0
15.0
15.0
FLA
8.6
8.4
4.2
3.6
WSA/MCA
10.8
10.5
5.3
4.5
MOP
15.0
15.0
15.0
15.0
FLA
17.2
16.8
8.4
7.2
WSA/MCA
19.4
18.9
9.5
8.1
MOP
25.0
25.0
15.0
15.0
FLA
17.2
16.8
8.4
7.2
WSA/MCA
19.4
18.9
9.5
8.1
MOP
25.0
25.0
15.0
15.0
FLA
17.2
16.8
8.4
7.2
WSA/MCA
19.4
18.9
9.5
8.1
MOP
25.0
25.0
15.0
15.0
FLA
17.2
16.8
8.4
7.2
WSA/MCA
19.4
18.9
9.5
8.1
MOP
25.0
25.0
15.0
15.0
FLA
25.8
25.2
12.6
10.8
WSA/MCA
28.0
27.3
13.6
11.7
MOP
35.0
35.0
15.0
15.0
10.8
FLA
25.8
25.2
12.6
WSA/MCA
28.0
27.3
13.6
11.7
MOP
35.0
35.0
15.0
15.0
10.8
FLA
25.8
25.2
12.6
WSA/MCA
28.0
27.3
13.6
11.7
MOP
35.0
35.0
15.0
15.0
FLA= Full Load Amperes
MOP= Maximum Overcurrent Protection
WSA/MCA=Wire Size Amperes/Minimum Circuit Amperes
*Values are calculated based on 3–phase power
APC NetworkAIR AFX Series: Electrical Data
29
Guide Specifications
General
Summary. The environmental control system shall be designed specifically
for precision temperature and humidity control applications. It will
automatically monitor and control heating, cooling, humidifying,
dehumidifying, and filtering functions for the conditioned space. The system
shall be built to the highest quality engineering and manufacturing standards,
and shall be subject to a functional test prior to leaving the factory. The
system shall be floor mounted and configured for up/down discharge of
conditioned airflow, with draw-through air pattern, to provide uniform air
distribution over the entire face of the coil.
Design requirements. The system shall be as described in the following
specification as manufactured by APC.
Model AFX _____________________________________.
Total cooling capacity: ________________ MBH (kW).
Sensible cooling capacity: ________________ MBH (kW).
Return air temperature: ________________ ° F (° C).
Dry bulb: ________________ ° F (° C).
Wet bulb: ________________% RH.
Air quantity: ________________ CFM (L/s) at 0.5" (125 Pa) external static
pressure.
Humidifier capacity: ________________ kW.
Electrical supply: __________ V, ______ ph, 60 Hz.
Submittals. Submittals shall be provided with the proposal and shall
include: capacity data, electrical data physical data, electrical connection
drawing and piping connection drawing.
Quality assurance. The system shall be completely factory-tested prior to
shipment. Testing shall include, but not be limited to: Completely charging
the system with refrigerant to ensure pressurized integrity, “Hi-Pot” test, and
controls calibration and settings. Each system shall ship with a completed test
report to verify completion of factory testing procedure. The system shall be
NTRL listed.
Product
Microprocessor. The microprocessor controller shall provide total
environmental control. The system, based on the main controller, shall offer
up to eight analog inputs, two analog outputs, twelve digital inputs and
thirteen digital outputs. The operator interface shall provide a 4-line, 80character backlit LCD display. User-friendly menu structure along with
APC NetworkAIR AFX Series: Guide Specifications
31
clearly defined prompts shall allow the operator to easily move about the
program and monitor the following functions and alarm conditions.
• Status: Complete status monitoring shall be provided within the status
menu of the microprocessor controller, and shall include the following
information: current temperature, current humidity, temperature
setpoint, humidity setpoint, cooling status, heating status, humidification
status, and dehumidification status.
• Alarms: Quick access to any alarm condition shall be facilitated
through the menu structure. Presence of a new alarm shall sound an
audible alarm. A red alarm LED on the display panel shall remain
illuminated until such time that all alarms have been cleared. Alarm
annunciation shall include: loss of air, clogged filter, high head pressure,
low suction pressure, high temperature, low temperature, high humidity,
low humidity. The temperature and humidity alarm setpoints are user
adjustable.
• Setpoint: The microprocessor controller shall provide independent
setpoints for heating, cooling, humidification, and dehumidification.
Automatic setpoint cross-over protection shall prevent the setting of the
heat setpoint above the cool setpoint, and the humidify setpoint above
the dehumidify setpoint. Setpoint adjustment shall be capable of being
protected via security code.
• Configuration: Flexibility shall be offered through the use of the
configuration menu. It shall closely match the operating requirements by
changing the configuration settings. The site configuration shall be
stored in the EEPROM and be protected from unauthorized tampering
by the user selectable 4-digit security password in the security menu.
Configuration options shall include: Fahrenheit or Celsius display,
compressor minimum off-time, power-loss restart time-delay, primarysecondary transfer functions, alarm input polarity, alarm enable,
temperature deadbands, humidity deadbands, and small room delay.
• Run time: The major components within the unit (motor, humidifier
and compressor) shall have independent run-timers that monitor and
store the accumulated run-hours on the components. The run timers shall
be provided with operator-adjustable run-time alarms for proper
component maintenance.
• Security: The microprocessor shall have multiple security levels to
prevent unauthorized adjustment of important system parameters. A
user-selectable 4-digit password shall allow setpoint and configuration
changes.
Cabinet and frame. The cabinet and frame shall be constructed from
welded structural steel. Access panels shall be flush with the frame and
insulated with fiberglass 1" (25 mm) in thickness, 1.5lb/ft3 (0.7kg/m3) in
density.
The panels are powder coated and lift off for access to the unit. A piping and
electrical access plate shall be provided in the bottom of the unit. All units
require front and left side access, 24" (610 mm) minimum.
Blower system. The unit shall be configured for draw-through air pattern, to
provide uniform air-flow over the entire face of the coil. The blower shall be
32
APC NetworkAIR AFX Series: Guide Specifications
double-inlet centrifugal type, with forward-curving blades, dynamically and
statically balanced. Each blower shall be independently driven by a highefficiency motor. The drive package shall be designed for 200% of the fan
motor horsepower. Minimum bearing life shall be 200,000 L10 hrs. The
motor and blower shall be mounted on a common frame which is isolated
from the vibration of the unit frame. Each blower shall discharge conditioned
air into an insulated static-regain duct located within the downflow unit.
Electrical. The electrical system shall conform to National Electrical Code
(NEC) requirements. The control voltage shall be 24 VAC, wired in
accordance with NEC Class 1 requirements. The control circuit wire shall not
be smaller than 18-gauge AWG. Each wire shall end with a service loop and
be securely fastened by an approved method. Control wires more than 6"
(150 mm) shall be color-coded or numbered every 3" (80 mm) for ease of
service tracing. All electrically-actuated components shall be easily
accessible from the front of the unit. Each high-voltage unit shall be
individually protected on all three phases. Main power shall be connected to
a circuit breaker mounted on the electrical panel. The compressor and motor
shall have overload and short-circuit protection. The electrical box shall
include all components and controls required for system operation. An
emergency cool-override manual switch shall be provided with provision for
control using a field supplied thermostat.
• Incoming power is __________V, ______ ph, 60 Hz.
Humidifier. The humidifier(s) shall be self-contained steam-generating
type, factory piped and wired, with disposable cylinder and automatic solidstate control circuit.
• Capacity: ____________lb/h (g/s).
Reheat. The reheat elements shall be low watt density resistance type, sized
to offset the sensible cooling capacity in the dehumidification mode and shall
be electrically and thermally protected by Safety Agency approved safeties.
• Reheat capacity shall be __________ MBH, _______ kW,
controlled in ________ (#) steps.
Refrigeration system. Each refrigeration system shall consist of a fully
protected scroll compressor, evaporator coil mounted over an insulated
stainless steel condensate pan, adjustable expansion valve, filter–drier, liquid
line solenoid valve, sight glass, receiver, liquid line isolation valve, low
pressure switch and manual reset high pressure switch.
Cooling coil. The evaporator coil shall use the latest heat-transfer
technology, raised lanced-aluminum fins and rifle-bored copper tubes. Coil
end-supports shall be galvanized steel. To enhance dehumidification, the coil
shall be split into two circuits by a microprocessor-controlled solenoid valve.
An insulated stainless steel drain pan for condensate shall be included.
Air filters. The air filters shall be 30% efficient per ASHRAE Standard
52.1–92, UL Class 2. The full 4" (102 mm) deep, pleated filters shall be
replaceable from the top on downflow units and from the front on upflow
units.
APC NetworkAIR AFX Series: Guide Specifications
33
Individual systems
Air-cooled system. The air cooled system shall consist of an evaporator
section including evaporator coil, blower package(s), controls and electrical
section and compressor(s). The condenser section shall be as follows:
• Outdoor propeller fan condenser: The outdoor condenser casing shall
be of aluminum, and all structural supports, coil frame, motor drive
supports, and mounting legs shall be made of galvanized steel. The
condenser shall have copper tubes expanded into aluminum fins.
Headers and connections shall be copper. The coil shall be pressure
tested and sealed for shipment. The condenser motors shall have
permanently lubricated sealed ball bearings, with internal overload
protection, and operate on __________-V, _____ -ph, 60-Hz power.
Motors shall be mounted inside the condenser casing for weather
protection, and shall be wired to a terminal strip in a weather-proof panel
on the unit. The direct drive, aluminum fan blade and painted steel hub
assembly, shall be protected by a heavy-gauge, vinyl-coated, steel-wire
fan guard. On multiple units, each fan section shall be separated by fullwidth baffles to prevent bypass air. The condenser shall be sized for
_________ ° F (° C) ambient, and condensing temperature controls shall
be fan speed for –20° F (–29° C) winter ambient. Flooded controls for –
40° F (– 40° C) optional.
• Indoor floor-mounted centrifugal fan condenser: The indoor floor
mounted condenser shall be a draw-through design and include quiet
belt-driven double-inlet centrifugal blower(s), and a condenser coil with
copper tubes expanded into aluminum fins. Belt(s) shall be sized for
200% of the system horsepower. All components shall be housed in a
corrosion-resistant, heavy-gauge, steel cabinet to match the evaporator
section in finish and construction, equipment with 1" (25 mm) supply
and return air-duct flanges. The condenser shall be sized for _______ ° F
(° C) ambient with condensing temperature controls for – 40°F (– 40°
C). The condenser section shall be remotely mounted suitable for
___________- V, _______ -ph, 60-Hz power.
• Models with air cooled condensing units: The air-cooled system shall
consist of an evaporator section including evaporator coil, blower
package(s), controls and electrical system. The remote air-cooled
condensing unit, including compressor(s), shall be housed outdoors in a
weather-resistant cabinet that shall allow service access through a
hinged panel. The condenser coil shall have rifled copper tubes and
enhanced aluminum fins. The coil shall be pressure-tested, and sealed
for shipment. The condensing unit shall be equipped with scroll
compressor(s) and crankcase heater(s), service valves, high and low
pressure controls, receiver with fusible plug, liquid shut–off valve and
charging port, liquid line filter–drier, and sight glass. The direct drive,
propeller fan, condensing unit motor(s) shall have permanently
lubricated sealed ball bearing, with internal overload protection, shall
operate on _______ -V,_______ -ph, 60-Hz power, and shall be mounted
inside the unit casing for weather protection. The standard condensing
unit shall be sized for 95° F (35° C) ambient, and controls shall be
flooded suitable for – 20° F (–29° C) winter ambient. Optional controls
for –30° F (–34° C) shall included insulated and heated receiver. The
condensing unit shall be field-wired and-piped to the evaporator section
and shall be suitable for remote outdoor installation.
34
APC NetworkAIR AFX Series: Guide Specifications
Water-and glycol-cooled systems. The water/glycol-cooled systems shall
consist of an evaporator section including evaporator coil, blower package(s),
controls and electrical section, compressor(s), and a water/glycol-cooled
condenser section. The condenser shall be stainless steel brazed plate design
and shall be controlled by 2-way (3-way optional) head pressure-regulated
valve(s). Maximum water pressure is 150 psi (1030 kPa).
• Outside heat exchanger (drycooler) for glycol cooled systems only:
The drycooler casing shall be of aluminum, and all structural supports,
coil frame, motor-drive supports, and mounting legs shall be made of
galvanized steel. The drycooler coil shall have copper tubes expanded
into aluminum fins. Headers and connections shall be copper. The coil
shall be pressure-tested and sealed for shipment. The drycooler motors
shall have permanently lubricated, sealed, ball bearings, and internal
overload protection. Motors shall be mounted inside the drycooler
casing for weather protection and wired to a terminal strip in a weatherproof panel on the unit. The direct-drive, aluminum fan blade and
painted steel hub assembly, shall be protected by a heavy-gauge, vinylcoated, steel-wire fan guard. On multiple fan units, each fan section shall
be separated by full-width baffles to prevent bypass air. The drycooler
shall be sized for 95° F (35° C) ambient, and operate on _______ -V,
______ -ph, 60-Hz power.
• Indoor floor mounted drycooler: The indoor floor-mounted drycooler
shall be a draw-through design and include a quiet belt-driven, double
inlet centrifugal blower(s), and a condenser coil with copper tubes
expanded into aluminum fins. Belt(s) shall be sized for 200% of the
system horsepower. All components shall be housed in a corrosionresistant, heavy-gauge, steel cabinet to match the evaporator section in
finish and construction, equipped with 1" (25 mm) supply and return air
duct flanges. The drycooler section shall be sized _________° F (° C)
ambient. The drycooler section shall be remotely mounted suitable for
__________ -V, ______ -ph, 60-Hz power.
• Single pump package for glycol cooled systems only: The pump
package shall be comprised of a centrifugal pump in a vented enclosure
with pump starter, separate drycooler fan and pump circuit breakers,
Aquastat, and fan cycling contractor(s) to control the fluid temperature.
The controls shall be mounted in a weather-tight box. An expansion tank
and Airtrol fitting shall be supplied for field installation. The pump size
shall be sized for ______ GPM (L/s) at ________ ft (m) external head,
and operate on _______-V, ______ -ph, 60-Hz power.
• Dual pump package for glycol cooled system only: The dual pump
package shall consist of two centrifugal pumps in an enclosure. Pump
starters, automatic pump switch-over controls, lead-lag pump selector
switch, separate drycooler fan and pump circuit breakers, aquastat, and
fan cycling contractor to control the fluid temperature shall be mounted
in a separate weather-tight box. An expansion tank and airtrol fitting
shall be supplied for field installation. Each pump shall be sized for
______GPM(L/s) at ______ft (m) external head, and operate on
______-V, ______ -ph, 60-Hz power.
APC NetworkAIR AFX Series: Guide Specifications
35
Options
Smoke detector(s). Smoke detector(s) shall be factory-installed in the
return air to sense concentrations of smoke and send a signal to the
microprocessor to shut down the unit and activate a visual and audible alarm.
Firestat. A firestat shall be factory-installed in the return air to sense heat
and send a signal to the microprocessor shutting down the unit and activating
a visual and audible alarm.
Water detector(s). Water detector(s) shall be factory-wired and shipped in
the bottom of the unit to sense water and send a signal to the microprocessor,
giving the operator possible alarm indications options for shutdown. The
water detector has a 15 ft (5 m) cable for mounting in the subfloor.
Remote sensor(s). The temperature and humidity sensors shall be shipped
loose in a 2" × 4" × 1.5" (51 mm × 102 mm × 38 mm) box and 50 ft (15 m) of
cable supplied for connection to the unit mounted controller.
Remote shutdown. A relay shall be factory installed in the unit with a two
pin terminal block to be field wired to a ______(24, 120, or 220 VAC) signal
which will shut down the unit control circuit when the signal is received.
Essential/non-essential lockout. An essential/non-essential lockout relay
shall be factory-installed and wired to a two-pin terminal block to prevent
operation of reheat or humidifier operation when a ______ (24, 120, or 220
VAC) signal is received.
Floorstand. An adjustable floorstand fabricated form heavy gauge steel
shall be provided. The height shall be adjustable from 6” to 36” (115 mm to
915 mm) on Upflow units and 12” to 36” (230 mm to 915 mm) on Downflow
units. Pedestals and vibration pads shall be included. Each pedestal shall be a
3/4" (19 mm) threaded rod, capable of a 2000-lb. (910 kg) vertical load. Zone
4 seismic floorstands shall ship loose and shall be _______ in (mm) high, up
to 36" (915 mm).
Air Deflector. A 90° air deflector shall ship loose and shall be _______ in.
(mm) high.
Top-discharge plenum. A top-discharge plenum shall be supplied with a
gasket material for mounting to an upflow unit. Manually adjustable, doubledeflecting grilles shall be provided on 3 or 4 sides. A combination of sound
lining and insulation material shall be used. Plenum height shall be 20" in
(508 mm) or 24" (610 mm).
Duct flange. A 1" (25 mm) duct flange shall be factory-installed on the top
of the upflow unit at the blower outlet.
Redundant group control. ________ (up to 6) units shall be capable of
being connected together to form a redundant group. The master
microprocessor controller shall monitor the status of the slave
microprocessor controllers and determine—based on run time alarm
conditions and local requirements, which the units in the redundant group
shall run.
Remote display panel. A remote microprocessor control display with
keypad shall be shipped loose in a 12" × 8" × 3"
(300 mm × 200 mm × 80 mm) box and 50 ft (15 m) of cable supplied for
connection to the units’ microprocessor logic board.
36
APC NetworkAIR AFX Series: Guide Specifications
Monitoring system. The PC-based Supervisor System shall be shipped
loose for single-terminal monitoring and control of up to 120 units. The
program shall be run through Windows® and shall have status screens for
individual unit conditions, mode of operation and alarms. The System shall
graphically present temperature and relative humidity over time.
Temperature, relative humidity, alarm history, etc. shall be recorded for
future reference.
Environmental monitoring unit. An “EMU” shall ship loose complete
with one 12' (305 mm) probe and network connection.
Hot water reheat. The unit shall be supplied with factory installed copper
tube, aluminum fin, hot water reheat coil in place of electrical heater
elements. Capacity shall be ______ MBH (kW) with ______ GPM (L/s) of
_______ ° F (° C) entering hot water temperature. Hot water shall be
controlled with an on/off solenoid valve.
Steam reheat. The unit shall be supplied with a factory-installed copper
tube, aluminum-fin-reheat steam-coil in place of electrical heater elements.
Capacity shall be _______MBH (kW) with 5 psi (35 kPa) of saturated steam.
Steam shall be controlled with an on/off solenoid valve.
Hot gas reheat. The unit shall be supplied with a factory-installed copper
tube and aluminum fin hot gas reheat coil, in place of electrical heater
elements. Air-cooled systems using hot gas reheat shall also include flooded
condenser pressure controls. This is not available with remote-condensing
units.
Premium efficiency motor(s). Each motor shall have a premium
efficiency of no less than _______% per NEMA MG1-12.55.
High efficiency filter(s). Filters shall be_______% efficient per ASHRAE
Standard 52.1-92, UL Class2. The full 4" (102 mm) deep, pleated filters shall
be replaceable from the top on downflow units and from the front on upflow
units.
Prefilter(s). Replaceable 1" (25 mm) thick 25–30% efficient filter(s) shall
be installed upstream of the final filters to lengthen service life.
Condensate pump, factory installed . A factory installed and wired
condensate pump shall pump 36 gal/h (0.06 L/s) at 15' (4.6 m) head.
Condensate pump, ship loose. A condensate pump shall ship loose for
field installation and wiring. Wiring shall be 120 VAC plug-in type. A check
valve is also shipped loose. It shall have a capacity of 60 gal/h (0.06 L/s) at
15 ft (4.6 m) head.
350 PSI water regulating valves. The condensing temperature shall be
automatically controlled by 2-way (3-way) 350 psi (2400 kPa) water
regulating valve(s).
Flared connections for filter-drier. Flared connections shall be factoryinstalled on either side of the filter-drier to allow easy replacement.
Hot gas bypass. The unit shall be supplied with a factory installed hot gas
bypass system to maintain efficient compressor operation during periods of
low load. The valve shall automatically control the amount of hot gas
bypassed to maintain the proper system capacity.
APC NetworkAIR AFX Series: Guide Specifications
37
Dimensional Data
Downflow—6–8 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
39
Downflow—10–18 ton
*All dimensions in inches (mm)
40
APC NetworkAIR AFX Series: Dimensional Data
Downflow—20–28 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
41
Upflow front-return—6–8 ton
*All dimensions in inches (mm)
42
APC NetworkAIR AFX Series: Dimensional Data
Upflow front-return—10–18 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
43
Upflow front-return—20–28 ton
*All dimensions in inches (mm)
44
APC NetworkAIR AFX Series: Dimensional Data
Upflow rear-return—6–8 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
45
Upflow rear-return—10–18 ton
*All dimensions in inches (mm)
46
APC NetworkAIR AFX Series: Dimensional Data
Upflow rear-return—20–28 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
47
Indoor rear-discharge centrifugal condenser—6–8 ton
*All dimensions in inches (mm)
48
APC NetworkAIR AFX Series: Dimensional Data
Indoor rear-discharge centrifugal condenser—10–18 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
49
Indoor rear-discharge centrifugal condenser—20–28 ton
*All dimensions in inches (mm)
50
APC NetworkAIR AFX Series: Dimensional Data
Indoor top-discharge centrifugal condenser—6–8 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
51
Indoor top-discharge centrifugal condenser—10–18 ton
*All dimensions in inches (mm)
52
APC NetworkAIR AFX Series: Dimensional Data
Indoor top-discharge centrifugal condenser—20–28 ton
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Dimensional Data
53
Air-Cooled Condensers and Drycoolers
Key to the model number
AF – X X X – X X X– X X X– XX
9ROWDJH
%&
6HULHV
$)
$);6HULHV
²
.$
0$
&RQWUROV
²
%$
$PELHQWWHPSHUDWXUH
$)/
DLUFRROHGIORRGHG
$)6
DLUFRROHGIDQVSHHGFRQWURO
*66
JO\FROVLQJOHVHWSRLQW
ƒ)
ƒ)
ƒ)
&RROLQJ&DSDFLW\RI8QLW
LQ1RPLQDO7RQQDJH;;;
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
55
Air-cooled condenser—physical data
MODEL
TEMP.
TONNAGE
AMBIENT
CFM
L/s
QUANTITY
HOT GAS
LIQUID
Lbs
Kg
95° F
6,450
3044
1
1-1/8"
7/8"
260
118
6 ton
8 ton
10 ton
12 ton
14 ton
18 ton
20 ton
26 ton
28 ton
56
AIR QUANTITY
FAN
CONNECTION
WEIGHT
105° F
6,450
3044
1
1-1/8"
7/8"
260
118
115° F
10,100
4766
2
1-1/8"
7/8"
450
204
95° F
10,100
4766
2
1-1/8"
7/8"
450
204
105° F
10,100
4766
2
1-1/8"
7/8"
450
204
115° F
12,400
5852
2
1-1/8"
7/8"
470
213
95° F
12,400
5852
2
1-1/8"
7/8"
470
213
105° F
12,400
5852
2
1-1/8"
7/8"
470
213
115° F
13,700
6465
2
1-1/8"
7/8"
510
231
95° F
13,700
6465
2
1-1/8"
7/8"
510
231
105° F
13,700
6465
2
1-1/8"
7/8"
510
231
115° F
12,900
6088
2
1-3/8"
1-1/8"
530
240
95° F
12,900
6088
2
1-3/8"
1-1/8"
530
240
105° F
12,900
6088
2
1-3/8"
1-1/8"
530
240
115° F
20,500
9674
3
1-3/8"
1-1/8"
550
249
95° F
20,500
9674
3
1-3/8"
1-1/8"
550
249
105° F
20,500
9674
3
1-3/8"
1-1/8"
550
249
115° F
19,900
9391
3
1-3/8"
1-1/8"
580
263
95° F
19,900
9391
3
1-3/8"
1-1/8"
580
263
105° F
19,900
9391
3
1-3/8"
1-1/8"
580
263
115° F
20,700
9768
2
1-5/8"
1-5/8"
880
400
95° F
20,700
9768
2
1-5/8"
1-5/8"
880
400
105° F
20,700
9768
2
1-5/8"
1-5/8"
880
400
115° F
34,800
16,422
3
2-1/8"
2-1/8"
1,190
540
95° F
34,800
16,422
3
2-1/8"
2-1/8"
1,190
540
105° F
34,800
16,422
3
2-1/8"
2-1/8"
1,190
540
115° F
32,900
15,526
3
2-1/8"
2-1/8"
1,210
550
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
Air-cooled condenser—electrical data
MODEL
TEMP.
TONNAGE
AMBIENT
FLA
MCA
MOP
FLA
MCA
MOP
FLA
MCA
MOP
FLA
MCA
95° F
4.8
10.8
20
N/A
N/A
N/A
2.4
5.4
15
2.0
4.5
15
105° F
4.8
10.8
20
N/A
N/A
N/A
2.4
5.4
15
2.0
4.5
15
115° F
8.2
14.2
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
95° F
8.2
14.2
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
105° F
8.2
14.2
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
115° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
95° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
105° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
115° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
95° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
105° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
115° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
95° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
105° F
8.7
14.7
20
7.4
13.4
20
3.7
6.7
15
3.0
5.5
15
115° F
12.6
18.6
25
10.0
16.0
20
5.0
8.0
15
3.9
6.4
15
95° F
12.6
18.6
25
10.0
16.0
20
5.0
8.0
15
3.9
6.4
15
105° F
12.6
18.6
25
10.0
16.0
20
5.0
8.0
15
3.9
6.4
15
115° F
12.6
18.6
25
10.0
16.0
20
5.0
8.0
15
3.9
6.4
15
95° F
12.6
18.6
25
10.0
16.0
20
5.0
8.0
15
3.9
6.4
15
105° F
12.6
18.6
25
10.0
16.0
20
5.0
8.0
15
3.9
6.4
15
115° F
N/A
N/A
N/A
11.8
17.8
25
5.9
8.9
15
4.4
6.9
15
95° F
N/A
N/A
N/A
11.8
17.8
25
5.9
8.9
15
4.4
6.9
15
105° F
N/A
N/A
N/A
11.8
17.8
25
5.9
8.9
15
4.4
6.9
15
115° F
N/A
N/A
N/A
18.8
24.8
35
9.4
12.4
15
6.8
9.3
15
15
6 ton
8 ton
10 ton
12 ton
14 ton
18 ton
20 ton
26 ton
28 ton
208-230/1/60
208-230/3/60
460/3/60
575/3/60
MOP
95° F
N/A
N/A
N/A
18.8
24.8
35
9.4
12.4
15
6.8
9.3
105° F
N/A
N/A
N/A
18.8
24.8
35
9.4
12.4
15
6.8
9.3
15
115° F
N/A
N/A
N/A
18.8
24.8
35
9.4
12.4
15
6.8
9.3
15
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
57
Single-fan air-cooled condenser—6 ton
APC UNIT
TEMP
FAN QTY
A
B
6 ton
95° F
(35° C)
1
49.75
(1264)
40.00
(1016)
6 ton
105° F
(41° C)
1
49.75
(1264)
40.00
(1016)
*All dimensions in inches (mm)
58
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
Dual-fan air-cooled condenser—6–14 ton
APC UNIT
TEMP
FAN QTY
A
B
6 ton
115° F
(46° C)
2
69.75
(1772)
60.00
(1524)
8 ton
95° F
(35° C)
2
69.75
(1772)
60.00
(1524)
8 ton
105° F
(41° C)
2
69.75
(1772)
60.00
(1524)
8 ton
115° F
(46° C)
2
69.75
(1772)
60.00
(1524)
10 ton
95° F
(35° C)
2
69.75
(1772)
60.00
(1524)
10 ton
105° F
(41° C)
2
69.75
(1772)
60.00
(1524)
10 ton
115° F
(46° C)
2
89.75
(2280)
80.00
(2032)
12 ton
95° F
(35° C)
2
89.75
(2280)
80.00
(2032)
12 ton
105° F
(41° C)
2
89.75
(2280)
80.00
(2032)
12 ton
115° F
(46°C)
2
89.75
(2280)
80.00
(2032)
14 ton
95° F
(35° C)
2
89.75
(2280)
80.00
(2032)
14 ton
105° F
(41° C)
2
89.75
(2280)
80.00
(2032)
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
59
Triple-fan air-cooled condenser—14–20 ton
APC UNIT
TEMP
FAN QTY
A
B
14 ton
115° F
(46° C)
3
129.75
(3296)
120.00
(3048)
18 ton
95° F
(35° C)
3
129.75
(3296)
120.00
(3048)
18 ton
105° F
(41° C)
3
129.75
(3296)
120.00
(3048)
18 ton
115° F
(46° C)
3
129.75
(3296)
120.00
(3048)
20 ton
95° F
(35° C)
3
129.75
(3296)
120.00
(3048)
20 ton
105° F
(41° C)
3
129.75
(3296)
120.00
(3048)
*All dimensions in inches (mm)
60
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
Dual-fan air-cooled condenser—20–26 ton
APC UNIT
TEMP
FAN QTY
20 ton
115° F
(46° C)
2
26 ton
95° F
(35° C)
2
26 ton
105° F
(41° C)
2
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
61
Triple-fan air-cooled condenser—26–28 ton
APC UNIT
TEMP
FAN QTY
26 ton
115° F
(46° C)
3
28 ton
95° F
(35° C)
3
28 ton
105° F
(41° C)
3
28 ton
115° F
(46° C)
3
*All dimensions in inches (mm)
62
APC NetworkAIR AFX Series: Air-Cooled Condensers and Drycoolers
Drycooler
Glycol cooled drycooler—physical data
MODEL
TEMP.
AIR QUANTITY
FAN
CONNECTION
WEIGHT
GLYCOL VOLUME
TONNAGE AMBIENT
CFM
L/s
QUANTITY
HOT GAS
LIQUID
Lbs
Kg
Gal
L
6 ton
95° F
10,100
4766
2
1-3/8"
1-3/8"
450
204
4.9
18.1
8 ton
95° F
12,900
6088
2
1-3/8"
1-3/8"
530
240
9.1
33.7
10 ton
95° F
20,500
9674
3
1-3/8"
1-3/8"
550
250
10.2
37.7
12 ton
95° F
20,500
9674
3
1-3/8"
1-3/8"
550
250
10.2
37.7
14 ton
95° F
21,900
10,335
2
2-5/8"
2-5/8"
790
359
9.2
34.8
18 ton
95° F
20,700
9768
2
2-5/8"
2-5/8"
880
400
11.8
43.7
20 ton
95° F
34,800
16,422
3
2-5/8"
2-5/8"
1190
540
13.0
48.1
26 ton
95° F
32,900
15,526
3
2-5/8"
2-5/8"
1210
550
13.0
48.1
28 ton
95° F
32,900
15,526
3
2-5/8"
2-5/8"
1210
550
13.0
48.1
Glycol cooled drycooler—electrical data
MODEL
TEMP.
TONNAGE
AMBIENT
FLA
208-230/1/60
MCA
MOP
FLA
208-230/3/60
MCA
MOP
FLA
460/3/60
MCA
MOP
FLA
MCA
MOP
6 ton
95° F
6.8
11.1
15
5.2
8.5
15
2.6
4.2
15
1.9
3.1
15
8 ton
95° F
7.8
12.7
20
5.2
8.5
15
2.6
4.2
15
1.9
3.1
15
10 ton
95° F
11.7
16.6
20
7.8
11.1
15
3.9
5.5
15
2.9
4.0
15
12 ton
95° F
11.7
16.6
20
7.8
11.1
15
3.9
5.5
15
2.9
4.0
15
14 ton
95° F
N/A
N/A
N/A
14.0
22.8
35
7.0
11.4
15
4.8
7.8
15
18 ton
95° F
N/A
N/A
N/A
14.0
22.8
35
7.0
11.4
15
4.8
7.8
15
20 ton
95° F
N/A
N/A
N/A
21.0
29.8
40
10.5
14.9
20
7.2
10.2
15
26 ton
95° F
N/A
N/A
N/A
21.0
29.8
40
10.5
14.9
20
7.2
10.2
15
28 ton
95° F
N/A
N/A
N/A
21.0
29.8
40
10.5
14.9
20
7.2
10.2
15
APC NetworkAIR AFX Series: Drycooler
575/3/60
63
Dual-fan fluid cooler—6–8 ton
APC UNIT
TEMP
FAN QTY
A
B
6 ton
95° F
(35° C)
2
69.5
(1765)
60.00
(1524)
8 ton
95° F
(35° C)
2
69.75
(1772)
80.00
(2032)
*All dimensions in inches (mm)
64
APC NetworkAIR AFX Series: Drycooler
Triple-fan fluid cooler—10–12 ton
APC UNIT
TEMP
FAN QTY
A
B
10 ton
95° F
(35° C)
3
129.75
(3296)
120.00
(3048)
12 ton
95° F
(35° C)
3
129.75
(3296)
120.00
(3048)
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Drycooler
65
Dual-fan fluid cooler—14–18 ton
APC UNIT
TEMP
FAN QTY
14 ton
95° F
(35° C)
2
18 ton
95° F
(35° C)
2
*All dimensions in inches (mm)
66
APC NetworkAIR AFX Series: Drycooler
Triple-fan fluid cooler—20–28 ton
APC UNIT
TEMP
FAN QTY
20 ton
95° F
(35° C)
3
26 ton
95° F
(35° C)
3
28 ton
95° F
(35° C)
3
*All dimensions in inches (mm)
APC NetworkAIR AFX Series: Drycooler
67
Pump Specifications
Pump performance
6
5
(
7
(
0
,1
'
$
(
+
,&
0
$
1
<
'
/
$
7
2
7
+3
,1
'
$ (
+
'
(
%
5
2
6
%
$
3
+
%
+3
+3
,&
7
( (
)
530
+3
+3
0
$ 1
<
'
/
$
7 2
7
+3
3
(
5
&
(
1
7
(
)
)
,&
,(
1
&
<
+3
&$3$&,7<,186*$//2163(50,187(
&$3$&,7<,1/,7(563(56(&21'
Pump electrical data
HP (kW)
1/2" (.37)
3/4" (.56)
1" (.75)
1.5" (1.1)
2" (1.5)
VOLTAGE
FLA
MCA
FLA
MCA
FLA
MCA
FLA
MCA
FLA
208/1/60
5.4
6.8
7.6
9.5
8.8
11.0
11.0
13.8
13.2
16.5
230/1/60
4.9
6.1
6.9
8.6
8.0
10.0
10.0
12.5
12.0
15.0
208/3/60
2.4
3.0
3.5
4.4
4.6
5.8
6.6
8.3
7.5
9.4
230/3/60
2.2
2.8
3.2
4.0
4.2
5.3
6.0
7.5
6.8
8.5
460/3/60
1.1
1.4
1.6
2.0
2.1
2.6
3.0
3.8
3.4
4.3
575/3/60
0.9
1.1
1.3
1.6
1.7
2.1
2.4
3.0
2.7
3.4
FLA= Full Load Amperes
MCA
MCA=Minimum Circuit Amperes
*Values are calculated based on 3-phase power
APC NetworkAIR AFX Series: Pump Specifications
69
Guidelines for Installation
The AFX series provides reliable, accurate temperature and humidity control
of computer rooms, laboratories, and other environments that require close
tolerance control. The unit incorporates the latest system design innovations
to provide you with optimum efficiency, reliability, and accuracy of control.
The AFX system will provide years of trouble-free service, if it is installed
and maintained by technically qualified personnel.
Room preparation
During the design of the room, consideration should be given to the
following factors: ease of entry for the system, floor-loading factors, and
accessibility of piping and wiring.
The room must be sealed with a vapor barrier to minimize migration of
moisture. Polyethylene film (plastic sheeting) is a good vapor barrier for
ceiling and wall applications. Rubber- or plastic-based paints should be
applied to concrete floors and walls. The room should be thoroughly
insulated to minimize thermal loads and make-up air (if required) should be
preconditioned to reduce additional temperature, filtration, and moisture
loads.
A room using a raised-floor plenum for air distribution should have at least
9" (300 mm) of clear space between the false floor and sub-floor for a
finished floor height of 12" (380 mm). Pay special attention to the location of
pipe chases, electrical conduits and other obstructions under the floor. These
objects can block air circulation and cause loss of air pressure, thus reducing
system efficiency and causing hot spots in your room.
Minimum clear space of 18" (460 mm) is to be provided for units over 15
tons (53 kW).
APC should be notified before installation if the unit is incorrect for the
application.
Unit location
The location of the unit is important for efficient and balanced environmental
control in your room. The air conditioner should be located as close as
possible to the largest heat load. In rooms having a high aspect ratio, mount
the unit along the longest wall to ensure even air distribution. If improperly
installed, erratic control or mechanical failure can and will result if the unit
does not obtain proper air volume and distribution.
Service access
At least 24" (610 mm) of clear space must be left in front of the unit for
routine service (belts, filters, humidifier). We strongly recommend
approximately 34" (860 mm) clearance in front of the unit.
Receiving the unit
Your AFX unit has been completely tested and inspected prior to shipment.
To ensure that you have received the unit in excellent condition, perform a
careful inspection of the crating and the unit immediately upon receipt.
APC NetworkAIR AFX Series: Guidelines for Installation
71
Verify that all parts ordered were received as specified and that the unit is the
correct size and voltage necessary to fulfill your environmental control
needs. Report any damage discovered to the freight carrier. If necessary,
contact the APC field service department for help in repairing or replacing
damaged parts. While APC is not responsible for damage incurred in transit,
we want to make sure that you have no undue delays in your system start-up.
Rigging
The unit is manufactured with a formed steel frame for maximum strength
and unit integrity. However, as with all electrical and mechanical equipment,
you must take care with proper rigging of your unit.
When using a forklift to move the unit, use the shipping skid to protect the
bottom of the unit. When using chains, cables or rope to lift the unit, use
spreader bars to prevent damage to the finished panel.
Floorstand
Install a threaded pedestal into each leg of the floorstand. Use the washer and
nut on each panel to tighten against the floorstand leg.
Utility connections
All connections are made through the bottom left of the unit (the left side of
upflow discharge units) for ease of service connections. Refer to the
installation manual for pipe sizes and specific locations for your unit.
Power unit
The AFX unit uses 3-phase power for operation. Bring the service cable
through the bottom left of the unit and through the bulkhead hole into the
electrical box to the circuit breaker provided on he left side of the electrical
box. The ground lug is located near the 3-phase high-voltage connector. THE
UNIT MUST BE UTILITY GROUNDED OR THE WARRANTY IS
VOID.
Humidifier
connections
The humidifier inlet connection is in the bottom of the mechanical section. A
1/4" compression connection is supplied with the unit.
Condensate drain
Condensate from the evaporator pan and discharge from the humidifier
flushing system drain through a 7/8" ID drain trap in the bottom of the unit.
Water supply to
humidifier
1. The humidifier fill valve orifice is sized for supply water pressure from
30 PSIG (210 kPa) to 85 PSIG (590 kPa).
2. For cases above 90 PSIG (630 kPa), install a pressure-reducing valve in
the water feed line to the unit.
3. With extremely dirty or muddy water sources, proper filtration is
required on the units incoming water line.
4. DO NOT use softened water with the humidifier. Softened water is too
conductive.
5. DO NOT use completely demineralized water with the humidifier. The
minerals allow the electrode principle to work.
6. DO NOT use a hot water source. Doing so will cause deposits that will
eventually block the fill valve orifices.
72
APC NetworkAIR AFX Series: Guidelines for Installation
7. Water supplies with high conductivity (above 700 µΩ) must be preconditioned for proper operation and longevity of the humidifier.
Water supply
A 16- to 20-mesh strainer must be installed in the water supply to the water
and glycol units to prevent clogging of brazed plate condenser. This is a field
item.
NOTE: Because of an ongoing program dedicated to product improvement,
specifications are subject to revisions without notice. APC assumes no
responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions.
APC NetworkAIR AFX Series: Guidelines for Installation
73
Š
APC Worldwide Customer Support
Customer support for this or any other APC product is available at no charge in any of the following ways:
•
Visit the APC Web site to find answers to frequently asked questions (FAQs), to access documents in the APC
Knowledge Base, and to submit customer support requests.
– www.apc.com (Corporate Headquarters)
Connect to localized APC Web sites for specific countries, each of which provides customer support information.
– www.apc.com/support
Global support with FAQs, knowledge base, and e-support.
•
Contact an APC Customer Support center by telephone or e-mail.
– Regional centers:
.
–
•
APC Headquarters
(U.S. and Canada)
(1) (800) 800-4272 (toll free)
Latin America
(1) (401) 789-5735 (United States)
Europe, Middle East,
Africa
(353) (91) 702020 (Ireland)
Japan
(03) 5434-2021 Guidance 3
Local, country-specific centers: go to www.apc.com/support/contact for contact information.
Contact the APC representative or other distributor from whom you purchased your APC product for information
on how to obtain local customer support.
Entire contents copyright © 2001 American Power Conversion. All rights reserved.
Reproduction in whole or in part without permission is prohibited. APC is a registered
trademark of American Power Conversion Corporation. All other trademarks,
product names, and corporate names are the property of their respective
owners and are used for informational purposes only.
990-0828A
1/2002
75