advertisement
User Manual
IDS-3117 Series
17" Industrial Open Frame
Monitor
Copyright
The documentation and the software included with this product are copyrighted 2012 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For outof-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1.
Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.
2.
Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.
3.
If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly.
4.
Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.
5.
Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.
IDS-3117 User Manual
Part Number: 2006D31100
Printed in Taiwan ii
Edition 1
June 2012
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FM
This equipment has passed the FM certification. According to the National Fire Protection Association, work sites are classified into different classes, divisions and groups, based on hazard considerations. This equipment is compliant with the specifications of Class I, Division 2, Groups A, B, C and D indoor hazards.
Technical Support and Assistance
1.
Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product.
2.
Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software, etc.)
– A complete description of the problem
– The exact wording of any error messages iii IDS-3117 User Manual
Warnings, Cautions and Notes
Warning! Warnings indicate conditions, which if not observed, can cause personal injury!
Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.
Note!
Notes provide optional additional information.
Document Feedback
To assist us in making improvements to this manual, we would welcome comments and constructive criticism. Please send all such - in writing to: [email protected]
IDS-3117 User Manual iv
Safety Instructions
1.
Read these safety instructions carefully.
2.
Keep this User Manual for later reference.
3.
Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
4.
For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
5.
Keep this equipment away from humidity.
6.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.
7.
The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
8.
Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
9.
Position the power cord so that people cannot step on it. Do not place anything over the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.
12.
Never pour any liquid into an opening. This may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
14.
If one of the following situations arises, get the equipment checked by service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Caution! For power adapter selection: the information about the adapter output rating (12 Vdc, 5 A min, or 18 W min) is provided in the user manual for user's selection if the power adapter is not shipped with the unit
v IDS-3117 User Manual
IDS-3117 User Manual vi
Contents
Chapter 1
Overview
...............................................1
Chapter 2
System Setup
.......................................5
Figure 2.1 IDS-3117 Series Dimensions ..................................... 7
Figure 2.2 IDS-3117E Series Dimensions ................................... 7
Rear Mount Assembly SOP ...................................................................... 8
Chapter 3
Touchscreen
......................................11
OSD Functions (IDS-3117 Series) .......................................................... 12
OSD Main Menu: Push the MENU Key ...................................... 12
Brightness Selection - Submenu................................................. 13
Contrast Control.......................................................................... 13
Screen Settings - Submenu ........................................................ 13
Color Temperature - Submenu ................................................... 14
Language - Submenu ................................................................. 14
OSD Setting - Submenu ............................................................. 15
VGA/DVI Selection..................................................................... 15
OSD Functions for IDS-3117E Series..................................................... 16
OSD Main Menu: Push the MENU Key ...................................... 16
OSD Lock.................................................................................... 16
OSD Unlock ................................................................................ 16
Color Adjustment - Submenu (Brightness /Contrast/ Color Adjust/
Color temp/Auto Color) ............................................................... 17
Image Setting Adjustment........................................................... 17
Image Adjustment - Submenu (Clock/Phase/H. Position/V.
Position) ...................................................................................... 18
OSD Menu Adjustment ............................................................... 18
OSD Adjustment - Submenu (OSD H.Pos./ OSD V.Pos./OSD
Timer).......................................................................................... 19
OSD Adjustment - Language Submenu...................................... 19
3.2.10 Reset Adjustment........................................................................ 20
Appendix A
Troubleshooting
................................21
vii IDS-3117 User Manual
IDS-3117 User Manual viii
Chapter
1
Overview
Sections include:
Introduction
Features
Applications
Product Photos
Naming Rule
1
1.1
Introduction
The Advantech IDS-3117 series is a brand new Industrial Open Frame Monitor, designed to meet the needs of customers who want quick and easy integration with
Advantech Embedded Box Computers, such as ARK and DSA lines. Advantech offers two different versions of IDS-3117 to meet different demands: IDS-3117 series
(Superior grade version) and IDS-3117E series (Economical version)
1.2
Features
17" SXGA LED backlight panel provides 20~30% power saving
-20°C ~ +60°C wide operating temperature support
Specially designed 5-wire resistive touchscreen
All new mechanical design with integrated bracket for easy installation
Versatile mounting methods for rear mount and VESA mount (75 x 75 mm, 100 x 100 mm)
1.3
Applications
Application scenarios - self-service applications:
KIOSK / POI machine
Transportation machine
Ticketing machine
Financial ATM
Entertainment / Gaming / Slot machine
HMI (Human-Machine Interface) equipment controller monitor
Public communication machine
Public advertisement machine
1.4
Product Photos
Front view
IDS-3117 User Manual 2
Rear view
IDS-3117 Bottom view
IDS-3117E Bottom View
1.5
Naming Rule
IDS – 3 1 17 NA R – 35 SX A1E
Code
3
IDS
OPFM series
Code
1
Type
Open Frame Monitor
Code Panel Size
10
˄˃ˁˇϙʳ
12
15
17
19
˄˅ˁ˄ϙʳ
˄ˈϙʳ
˄ˊϙʳ
˄ˌϙʳ
Code Panel Type
NA
W
E
4:3
Wide
Economical version
Code
N
R
C
G
P
Touch Solution
Non touch
Resistive
Capacitive
Glass Only
PCT
Code Brightness
20 200
30
50
80
300
500
800
1K
K2
K7
1000
1200
1700
Revision
Code
VG
SV
XG
SX
HD
FH
Resolution
VGA
SVGA
XGA
SXGA
HD
FHD
3 IDS-3117 User Manual
IDS-3117 User Manual 4
Chapter
2
System Setup
Sections include:
Specifications
Dimensions
Rear Mount Assembly SOP
Cable Clamp
Accessory Packing
2
2.1
Specifications
Note!
The IDS-3117 series offers the following features and meets precise specifications.
Unless otherwise noted, all the information listed below is subject to change without prior notification.
Display
Touch
Environment
System
Model IDS-3117 IDS-3117E
Size
Resolution
Viewing Angle
I/O (IDS-3117E)
OSD (IDS-3117)
OSD (IDS-3117E)
Power
EMC Compliance
17" LED panel 17" CCFL panel
1280 x 1024 (SXGA) 1280 x 1024 (SXGA)
85° /85° (H), 80° /80° (V) 85° /85° (H), 80° /80° (V)
Brightness
Color Support
Contrast Ratio
Response Time
Backlight Life
T/S Type
350 (cd/m
2
)
16.7 M colors
800:1
30 [msec]
50,000 hrs
380 (cd/m
2
)
16.7 M colors
1000:1
5 [msec]
50,000 hrs
5-Wire Resistive Touch Screen
Surface Hardness
Durability
3H
10 million touches
Transparency 80%
± 3%
Operating Temperature -20 ~ 60° C (-4 ~ 140° F) 0~ 45° C (32 ~ 113° F)
Storage Temperature
Humidity
Vibration
I/O (IDS-3117)
-30 ~ 70° C (-22 ~ 158° F) -20 ~ 60° C ( -4 ~ 140° F)
10 ~ 90% @ 40° C, non-condensing
5-500Hz, 0.026G2/Hz, 2.16Grms, X, Y, Z
1 hour per axis
VGA x 1; DVI-D x 1; 12 VDC Jack x 1;
USB x1; RS-232 x 1
(USB & RS-232 are reserved for the connection to enable touch usage only)
VGA x 1; 12 VDC Jack x 1; USB x1; RS-232 x 1
(USB & RS-232 are reserved for the connection to enable touch usage only)
Keys: Menu, Up, Down, Auto Adjust, Monitor Power on/off.
Menu Functions: Brightness, Contrast, Screen Settings, Color Temp, Language OSD Settings, VGA/
DVI , Recall , Auto Adjust.
Keys: Menu, Up, Down, Auto Adjust, Monitor Power on/off.
Menu Functions: Brightness, Contrast, Color Adjust,
Color Temp, Auto Color and Language.
60 W power adapter, with AC 100 ~ 240 V input and
DC +12 V @ 5 A output.
CE/FCC/CCC
IDS-3117 User Manual 6
2.2
Dimensions
Figure 2.1 IDS-3117 Series Dimensions
Figure 2.2 IDS-3117E Series Dimensions
7 IDS-3117 User Manual
2.3
Rear Mount Assembly SOP
1.
Use the M3 screws to attach and tighten as follows.
2.4
Cable Clamp
1.
A cable clamp also comes with Open Frame Monitor to fix the power cable, see below.
Cable Clamp with IDS-3117
IDS-3117 User Manual 8
Cable Clamp with IDS-3117E
2.
A cable tie for the USB cable is included in the accessory box, see below:
9 IDS-3117 User Manual
2.5
Packing List
1 x VGA cable 15P(M) 1.8 meter
1 x USB-A(M)/USB-A(M) 1.8 meter
8 x panel-mount clamps
8 x Panel-mount clamper screws: M4_25L
1 x cable clamp
1 x cable clamp screw
1 x cable tie
CD-ROM for IDS-3117 Series
1 x 60 W DC12V Power Adapter (optional order)
1 x Power Cord (optional order)
1 x DVI cable 2.0 meter (optional order)
1 x RS-232 9P/9P 1.8M M/F cable (optional order)
Note!
The above accessory cables are subject to change in different
SKUs.
IDS-3117 User Manual 10
Chapter
3
Touchscreen
Sections include:
OSD Functions
Touch Drivers
3
3.1
OSD Functions (IDS-3117 Series)
The OSD of the IDS-3117 display (1280 x 1024 resolution) was selected to illustrate examples below:
Buttons Description
Power
Menu
Auto
Value Up/Down
Turn the monitor power ON or OFF
Activate the OSD menu
Exit menu
Automatically adjust the clock, phase
H-position and V-position
Move the selector to the previous option
Decrease the gauge value of the selected option
LED Function
DPMS ON
DPMS STANDBY
DPMS OFF
Green
Orange
Red
3.1.1
OSD Main Menu: Push the MENU Key
IDS-3117 User Manual 12
3.1.2
Brightness Selection - Submenu
3.1.3
Contrast Control
3.1.4
Screen Settings - Submenu
13 IDS-3117 User Manual
3.1.5
Color Temperature - Submenu
3.1.6
Language - Submenu
IDS-3117 User Manual 14
3.1.7
OSD Setting - Submenu
3.1.8
VGA/DVI Selection
15 IDS-3117 User Manual
3.2
OSD Functions for IDS-3117E Series
3.2.1
OSD Main Menu: Push the MENU Key
3.2.2
OSD Lock
Press the "Right" key and "Menu" key simultaneously to lock the OSD key.
3.2.3
OSD Unlock
Press the "Right" key and "Menu" key simultaneously again to unlock the OSD key.
IDS-3117 User Manual 16
3.2.4
Color Adjustment - Submenu (Brightness /Contrast/ Color
Adjust/Color temp/Auto Color)
3.2.5
Image Setting Adjustment
17 IDS-3117 User Manual
3.2.6
Image Adjustment - Submenu (Clock/Phase/H. Position/V.
Position)
3.2.7
OSD Menu Adjustment
IDS-3117 User Manual 18
3.2.8
OSD Adjustment - Submenu (OSD H.Pos./ OSD V.Pos./OSD
Timer)
3.2.9
OSD Adjustment - Language Submenu
19 IDS-3117 User Manual
3.2.10
Reset Adjustment
3.3
Touch Drivers
The T/S driver CD-ROM is in the accessory box and comes with the product. It is also available online at the Advantech website as follows: http://support.advantech.com/support/default.aspx
IDS-3117 User Manual 20
Appendix
A
A
Troubleshooting
A.1
Introduction
If experiencing trouble with the monitor, or it fails to operate correctly, please refer to the following instructions before calling the Advantech service center. If unable to correct the faults using the instructions below, then please contact the distributor or the services/repair center.
A.2
Troubleshooting
No Images Appears On Screen
Check to see that all the I/O and power connectors are installed correctly and connected. (Refer to 1.4, Open Frame Bottom view )
Make sure that none of the connectors are crooked, broken or loose.
Make sure that the OSD power on the LED is turned on.
Make sure that the brightness is not in the minimum.
Make sure that the screen resolution is set to the correct setting for the type of
LCD, and that the setting does not exceed the resolution specified for the particular model of LCD.
The image is incorrectly displayed, or the full screen image does not appear
Please make sure the screen resolution on the motherboard is correct.
The position of screen is not in the center
Adjust the H-position and V-position or perform “Auto”.
Out of range
When the message “Out of Range” appears onscreen, it indicates that the signal of the computer is not compatible with the LCD display; i.e. the resolution exceeds the specified resolution for the LCD.
Adjust the BIOS setting to match the correct resolution.
No signal
The display is powered on, but can neither receive or display any signal from the computer. Check all power switches, power cables and VGA signal cables to ensure that all are connected correctly on both sides.
Going to sleep
If the system goes to sleep, then the display has either been set to power-saving mode, or the display is experiencing a sudden signal disconnection problem.
Check the BIOS system settings, and/or Windows configuration. Then check the connection of the power cable to computer on both sides.
IDS-3117 User Manual 22
23 IDS-3117 User Manual
www.advantech.com
Please verify specifications before quoting. This guide is intended for reference purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher.
All brand and product names are trademarks or registered trademarks of their respective companies.
© Advantech Co., Ltd. 2012
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement