American Standard 6425 Indoor Furnishings User Manual

Proprietary Telephones
Quick Reference Guide
KX-T7720/KX-T7730
KX-T7731/KX-T7735
Model KX-T7736/KX-T7750
Important Information
When you ship the product:
Carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Attach a postage-paid letter, detailing the symptom to the outside of the carton.
DO NOT send the product to the Executive or Regional Sales offices. They are NOT
equipped to make repairs.
Product service:
Panasonic Servicenters for this product are listed in the servicenter directory.
Consult your authorized Panasonic dealer for detailed instructions.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
THIS HANDSET EARPIECE IS MAGNETIZED AND MAY RETAIN SMALL FERROUS
OBJECTS.
IMPORTANT NOTICE:
Under power failure conditions, this telephone may not operate. Please ensure that a
separate telephone, not dependent on local power, is available for use in an emergency.
Note:
In this manual, the suffix of each model number is omitted.
Included Accessories: for extra orders, call toll free 1-800-332-5368
Handset . . . . . . . . . . . . . . . 1
Handset Cord . . . . . . . . . 1
Telephone Line Cord . . . . . 1
Stand . . . . . . . . . . . . . . . . 1
Overlay . . . . . . . . . . . . . . . . 1 (Other than KX-T7720, KX-T7750)
For your future reference
DATE OF PURCHASE
SERIAL NO.
(found on the bottom of the unit)
NAME OF DEALER
DEALER'S ADDRESS
DEALER'S TEL. NO.
Please read this manual before using and save for future reference.
Features List
Outside (CO) Line button
Programmable Feature button
Off-hook
Talk
On-hook
Feature number
* "Location of Controls" is shown on page 8.
Operation
Desired Feature
Making Calls
To an extension
Calling
To an external party
extension no.
phone no.
Redial
To program
KX-TA624
KX-TA1232
(Check the type of your Main Unit.)
One-Touch
Dialing
phone no.
To dial
assigned as a One-Touch
Dialing button
Calling an
operator
To set
KX-TA624
3
KX-TA1232
personal speed dial no.
(Check the type of your Main Unit.)
Speed Dialing
(Personal)
desired no.
To dial
KX-TA624
3
KX-TA1232
(Check the type of your Main Unit.)
Speed Dialing
(System)
To dial
system speed dial no.
–2–
personal speed dial no.
Features List
Operation
Desired Feature
Receiving Calls
Handsfree
answerback
(Other than
KX-T7750)
While on-hook
Outside (CO) Line (KX-TA1232 only)
Directed
Picking up
a call
extension no.
KX-TA624
extension no.
KX-TA1232
(Check the type of your Main Unit.)
Group
When the Dialed Extension is Busy/No Answer
Automatic
Callback Busy
To set
While hearing a busy tone
To call
If you hear callback ringing
To leave a notification
To cancel a notification
KX-TA624
Sender
receiver's extension no.
KX-TA1232
receiver's extension no.
(Check the type of your Main Unit.)
Message
Waiting
To call back
To clear all notifications
Receiver
KX-TA624
your
extension no.
KX-TA1232
(Check the type of your Main Unit.)
–3–
Features List
Operation
Desired Feature
When the Dialed Extension is Busy/No Answer
Sender
While hearing a busy tone
Wait for an answer.
KX-TA624
For outside calls
Set
Cancel
For intercom calls
Set
Call Waiting
Cancel
Receiver
KX-TA1232
Set
Cancel
(Check the type of your Main Unit.)
To talk to the new party
While hearing the Call Waiting tone
Terminating a current status
Holding a current status
During a Conversation
Holding
To retrieve a call at the holding extension
Holding a call
To retrieve an outside call from another extension
Holding a call
exclusively
Holding
To retrieve a call on exclusive hold
Screened
To an extension
extension no.
Transferring
a call
phone no.
To an external party
(System programming
is required.)
Unscreened to an extension
extension no.
–4–
Wait for
an answer.
Announce.
Features List
Operation
Desired Feature
Useful Features
To page
All extensions
Group
group no.
KX-TA624
All external speakers
All extensions & external speakers
Announce.
KX-TA1232
All external speakers
Paging
Specific external speaker
external speaker no.
All extensions & external speakers
(Check the type of your Main Unit.)
To answer an announced page
From a telephone speaker
From an external speaker
KX-TA624
external speaker no.
KX-TA1232
(Check the type of your Main Unit.)
Three-party
conference
third party's no.
To set
KX-TA624
message no.
parameter
(if required)
KX-TA1232
message no.
Setting Absent
Message
(Check the type of your Main Unit.)
To cancel
KX-TA624
KX-TA1232
(Check the type of your Main Unit.)
–5–
parameter
(if required)
Features List
Operation
Desired Feature
Useful Features
KX-TA624
For Log-In
For Log-Out
Log-In/Log-Out
KX-TA1232
For Log-In
For Log-Out
(Check the type of your Main Unit.)
KX-TA624
All calls
extension no.
Busy/No answer
extension no.
To an outside line
line access
phone no.
code
Follow Me
your extension no.
Cancel Follow Me
your extension no.
Cancel
KX-TA1232
Forwarding
a call
All calls
extension no.
Busy
extension no.
No answer
extension no.
Busy/No answer
extension no.
To an outside line
line access
phone no.
code
Follow Me
your extension no.
Cancel Follow Me
your extension no.
Cancel
(Check the type of your Main Unit.)
–6–
Features List
Operation
Desired Feature
Useful Features
KX-TA624
Do Not Disturb
(DND)
#
Set
#
Cancel
KX-TA1232
Set
Cancel
(Check the type of your Main Unit.)
KX-TA624 (Lock code is 4 digits.)
Locking your
extension
7
7
7
7
lock code
lock code
lock code
#
7
7
lock code
7
7
lock code
lock code
9
#
KX-TA624
7
9
0
KX-TA1232
(Check the type of your Main Unit.)
* Consult your dealer for more details on the operations above.*
–7–
Lock
Unlock
7
Lock
Unlock
KX-TA1232 (Lock code is 3 digits.)
(Check the type of your Main Unit.)
Clearing the
setting
#
Location of Controls
2
RINGER
0
1
BACKLIGHT
LCD (Liquid Crystal Display)
RINGER Volume Selector/
BACKLIGHT
Illumination Selector
18
17
16
15
1
2
3
4
5
14
6
7
8
9
10
11
12
Headset Jack
13
Microphone
* The KX-T7750 does not have a microphone.
* The backlit display is only available on the KX-T7730/7731/7735/7736.
* The headset is an option. Recommended headsets are
KX-TCA91 and KX-TCA92.
1
PROGRAM: Used to enter and exit the
programming mode.
2
CONF (Conference): Used to establish a
multiple party conversation.
3
INTERCOM: Used to make or receive
intercom calls.
4
FWD/DND (Call Forwarding/Do Not
Disturb): Used to perform Call Forwarding
or Do Not Disturb.
5
6
AUTO ANS (Auto Answer)
(Other than KX-T7750): Used to receive an
incoming call in the hands-free mode.
MUTE (Other than KX-T7750): Used to
mute the microphone during a conversation.
VOICE CALL (KX-T7750 only): Used to
receive a notification via monitor in place of
ringing.
FLASH/RECALL: Used for External Feature
Access or to disconnect the current call and
make another call without hanging up.
7
AUTO DIAL/STORE: Used for speed
dialing or storing program changes.
8
REDIAL: Used to redial.
–8–
Location of Controls
9
DIALING BUTTONS WITH BACKLIGHT
(KX-T7731/36): Dialing buttons are backlit
when (1) you receive a call, (2) during a
conversation, or (3) when BGM is activated
at your phone.
15
TRANSFER: Used to transfer a call to
another party.
Flexible Outside (CO) Line Button:
Used to make or receive an outside call.
Pressing this button seizes an idle outside
line automatically. (Button assignment is
required.) Also used as feature buttons.
(Button assignment is required.)
10
16
PAUSE: Used to insert a pause during
dialing.
11
HOLD: Used to place a call on hold.
17
12
SP-PHONE (Other than KX-T7750): Used
for the handsfree operation.
MESSAGE: Used to leave a message
waiting indication, or call back the party
who left the message waiting indication.
18
Message/Ringer Lamp: The Message/
Ringer lamp informs you visually that you
have a message or a call.
When you receive a call, the lamp
flashes depending on the ringing pattern.
When the ringing pattern is set to Single
(Slow flash), Double (Moderate flash), or
Triple (Rapid flash) in your PBX, the lamp
flashes. When the other ringing patterns
are set in your PBX, the lamp may not
flash. (e.g., S-Double, Call Waiting
Tone1).
MONITOR (KX-T7750 only): Used for
handsfree dialing. You can monitor the
other party's voice handsfree.
13
NAVIGATOR KEY
(KX-T7730/7731/7735/7736):
Used to adjust the volume and the display
contrast, or select desired items.
VOLUME KEY (KX-T7720/7750): Used to
adjust the volume.
14
Programmable Feature (PF) Button:
Used as an One-Touch Dialing button
(Button assignment is required).
When someone has left you a message,
the lamp is lit continuously.
Initial Settings
Speaker volume *
Handset/Headset volume *
While on-hook or during a conversation
While using the handset or headset
SP-PHONE
Press
SP-PHONE.
Press Up or Down.
Press Up or Down.
Display contrast *
Ringer volume/Backlight illumination
KX-T7730/7731/7735/7736
2
RINGER
0
1
BACKLIGHT
Slide the lever of the RINGER Volume Selector and
BACKLIGHT Illumination Selector to the desired setting.
BACKLIGHT SW POSITION
2
1
LCD backlight
HIGH LOW
DIALING BUTTONS backlight AUTO AUTO
0
OFF
OFF
AUTO: The backlight shines only during operation.
Press Left or Right.
* The above settings may return to default
settings if the telephone line cord is
disconnected, or the main unit's power is
interrupted.
–9–
Connection
The telephone line cord
(included)
To the main unit ( TO MAIN UNIT )
/PABX
< Back view>
Headset
CAUTION
Ensure the cord is inserted in the groove
to prevent damage to the connector.
Wall Mounting
1 Pull down the handset hook until it locks,
so the tab holds the handset.
2 Remove the attached stand.
2
1
To temporarily place the handset down
during a conversation, hook it over the
top edge of the phone as shown.
3 Mount the unit on the wall.
* KX-T7735 model illustrated on this page.
– 10 –
Exhibit J - Customer Information
This equipment complies with Part 68 of the ACTA rules and the requirements
adopted by the ACTA. On the exterior of the cabinet of this equipment is a
label that contains, among other information, a product identifier in the format
ACJGTB-32973-MF-E/ACJGTB-43121-MF-E. If requested, this number must
be provided to the telephone company.
ACTA Registration Number (KX-TA624): ACJGTB-32973-MF-E
(KX-TA1232): ACJGTB-43121-MF-E
Ringer Equivalence Number (REN): 0.4B
Facility Interface Code (FIC): 02LS2
Service Order Code (SOC): 9.0F
USOC Jack Type (KX-TA624): RJ11
(KX-TA1232): RJ11 and RJ14C
A FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network
or premises wiring using a compatible modular jack that is Part 68 compliant. See
Installation Instructions for details.
If this equipment KX-T7731/36 causes harm to the telephone network, the
telephone company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes to it's facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice so you can make the necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment KX-T7731/36, for repair or warranty
information, please contact
Panasonic Services Company
BTS Center
1225 Northbrook Parkway Suite
1-216 Suwanee
GA 30024
If the equipment is causing harm to the telephone network, the telephone company
may request that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. (Contact the state public utility
commission, public service commission or corporation commission for information.)
This equipment is hearing aid compatible.
– 11 –
Exhibit J - Customer Information
Data Equipment
The table below shows which jacks are associated with which modes of operation:
USOC Jack
Mode of Operation
KX-TA624
KX-TA1232
Permissive
RJ11
RJ11 and RJ14C
Programmable
RJ41S and RJ45S
RJ41S and RJ45S
Fixed Loss Loop
RJ41S
RJ41S
Systems
Facility Interface Codes (FIC), Service Order Codes (SOC), USOC Jack Codes and Ringer
Equivalence Numbers (REN) are shown in the table below for each port where applicable:
Port
FIC
SOC
CO1 ~ 3
02LS2
9.0F
KX-TA624
RJ11
USOC Jack
KX-TA1232
RJ11 and RJ14C
Port
0.4B
Adjuncts – KX and PX Devices
When this adjunct is used with a leased system, permission of the owner should be
requested for connection of the adjunct.
KX-type telephones with message waiting lights and/or line status indicators can only be
connected to host equipment and never directly to the network.
KX devices can only be installed with the permission of the owner of the host equipment as
“surgery” is often required on the host system.
– 12 –
Important Safety Instructions
When using this unit, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, or
personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on this unit.
3. Unplug this unit from the main unit
before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth
for cleaning.
4. Do not use this unit near water, for
example, near a bathtub, washbowl,
kitchen sink, or the like.
5. Place this unit securely on a stable
surface. Serious damage and/or injury
may result if the unit falls.
6. Do not cover slots and openings on
the unit. They are provided for
ventilation and protection against
overheating. Never place the unit near
radiators, or in a place where proper
ventilation is not provided.
7. Do not allow anything to rest on the
extension cord. Do not locate this unit
where the cord will be abused by
persons walking on it.
8. Do not overload wall outlets and
extension cords. This can result in the
risk of fire or electric shock.
9. Never push any objects through slots
in this unit. This may result in the risk
of fire or electric shock. Never spill
any liquid on the unit.
10.To reduce the risk of electric shock,
do not disassemble this unit. Take the
unit to an authorized servicenter when
service is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the unit is
subsequently used.
11. Unplug this unit from the main unit,
and refer servicing to an authorized
servicenter when the following
conditions occur:
A. When the extension cord is
damaged or frayed.
B. If liquid has been spilled into the
unit.
C. If the unit has been exposed to rain
or water.
D. If the unit does not work normally
by following the manual. Adjust
only controls covered by the
manual. Improper adjustment may
require extensive work by an
authorized servicenter.
E. If the unit has been dropped, or
physically damaged.
F. If the unit exhibits a distinct change
in performance.
12. Avoid using a telephone (other than
a cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
13. Do not use this unit to report a gas
leak, when in the vicinity of the leak.
– 13 –
SAVE THESE
INSTRUCTIONS
FCC and Other Information
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To assure continued compliance with FCC rules, do not make any
unauthorized modifications. When programming emergency numbers and/or making
test calls to emergency numbers:
1) Remain on the line and briefly explain to the dispatcher the reason for the call
before hanging up.
2) Perform such activities in the off peak hours, such as early morning hours or late
evenings.
If there is any problem, unplug the extension and connect a known working phone.
If the known working phone operates properly, have the defective phone repaired by
your maintainer. If the known working phone does not operate properly, check the
PBX System and the internal extension wiring.
Keep the unit away from heating appliances and electrical noise generating devices
such as fluorescent lamps and motors.
The unit should be kept free of dust, moisture and vibration, and should not be
exposed to direct sunlight.
Do not use benzine, thinner, or any abrasive powder to clean the cabinet. Wipe it
with a soft cloth.
Do not disassemble this unit. Dangerous electrical shock could result. The unit
must only be disassembled and repaired by qualified service technicians.
When a failure occurs which exposes any internal parts, disconnect the telephone
line and mains supply immediately and return the unit to your maintainer.
This telephone provides magnetic coupling for hearing aids.
– 14 –
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way,
Secaucus, New Jersey 07094
www.panasonic.com
Panasonic Sales Company ("PSC"),
Division of Matsushita Electric of
Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5,
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
2002 Panasonic Communications Co., Ltd. All Rights Reserved.
Printed in the United Kingdom
PSQW1921WA KU0902YS3054