Instruction manual | AMX Wireless Touch Panels (Wave Server) Car Video System User Manual

English
Deutsch
DZ-GX20E (UK)/DZ-MV780E (UK)
DZ-MV750E (UK)/DZ-MV730E (UK)
DISC N
TIO
NAVIGA
DISC N
TIO
NAVIGA
SELECT
SELECT
XIT
STOP/E
XIT
STOP/E
MENU
MENU
DISC N
TIO
NAVIGA
SELECT
XIT
STOP/E
MENU
DZ-GX20E
DZ-MV780E
DZ-MV750E/DZ-MV730E
Instruction manual
Bedienungsanleitung
To obtain the best performance and ensure years of
trouble-free use, please read this instruction
manual completely.
Bitte lesen Sie diese Bedienungsanleitung
aufmerksam durch, um durch richtige Bedienung
jahrelangen und störungsfreien Betrieb zu
gewährleisten.
Mode d’emploi
Des performances optimales et un fonctionnement
à long terme seront assurés en appliquant les
présentes instructions après avoir entièrement lu
ce mode d’emploi.
DVDCAM PC Software Support Centre
URL http://dvdcam-pc.support.hitachi.ca/
Français
DZ-GX20E/DZ-MV780E
DZ-MV750E/DZ-MV730E
English
Important Information
For Your Safety
The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the
camera/recorder is to be left unattended for a long period of time, turn it off.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE
RECOMMENDED ACCESSORIES ONLY.
The DVD video camera/recorder and AC
adapter/charger have the following caution
marks.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Identifications of caution marks
This symbol warns the user that
uninsulated voltage within the unit
may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous
to make any kind of contact with any
inside part of this unit.
This symbol alerts the user that
important literature concerning the
operation and maintenance of this unit
has been included. Therefore, it should
be read carefully to avoid any
problems.
Precautions
WARNING: Many television programmes and
films are copyrighted. In certain circumstances,
copy-right law may apply to private in-home
videotaping of copyrighted materials.
The liquid crystal display (LCD) panel is
made by highly precise technology. More than
99.99% of its picture elements (pixels) are
effective, but some (less than 0.01%) may
appear as coloured bright dots. This does not
indicate a fault as the LCD panel stretches the
limits of current technology.
2
WARNING: To prevent risk of injury or damage
to your DVD video camera/recorder and the AC
adapter/charger, use only the DZ-BP14S/DZBP7S/DZ-BP14SW/DZ-BP7SW battery and DZACS2 (E) AC adapter/charger.
CLASS 1
LASER PRODUCT
CAUTION
This product contains a laser diode of higher
class than 1. To ensure continued safety, do
not remove any covers or attempt to gain
access to the inside of the product. Refer all
servicing to qualified personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue= Neutral, Brown= Live
As these colours may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured
BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED. On no account connect either of these wires to the terminal marked E or by the
earth symbol
or coloured green or green and yellow.
3
English
Important for United Kingdom
(for DZ-GX20E (UK)/DZ-MV780E (UK)/DZ-MV750E (UK)/DZ-MV730E (UK))
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value
of which is indicated on the pin face of the plug.
Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the
same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of
the plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power
points in your home or the cable is too short to reach a power point, then obtain an appropriate
safety approved extension lead or consult your dealer.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately,
having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the
mains supply.
English
IMPORTANT SAFETY INSTRUCTIONS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a
major factor in the design of every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/
recorder and accessory equipment.
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9
Protect the mains lead from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
10
Only use attachments/accessories specified by the
manufacturer.
11
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
12
Unplug this apparatus during lightning storms or
when unused for long periods of time.
13
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as mains lead or plug is
damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
14
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
4
English
Cautions When Using
Handle the liquid crystal display (LCD) with care:
• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with
a sharp object.
• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear
soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.
• Do not place the DVD video camera/recorder with the open LCD screen down.
• Close the LCD monitor when not using the DVD video camera/recorder.
Liquid crystal display (LCD) and viewfinder:
• The LCD screen and viewfinder are the products of highly precise technology. Among the total
number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels
for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as coloured dots
(red, blue, green). This shows the limitations of the current technology, and does not indicate a
fault that will interfere with recording.
• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/
recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal
brightness will be restored when the temperature inside the DVD video camera/recorder rises.
Hold the DVD video camera/recorder correctly:
• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The
viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.
Do not subject the DVD video camera/recorder to impact:
• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it
against a hard object or let it fall.
• When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD
video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause
malfunctions or defects.
No water or oil!
• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric
shock, malfunctions or defects.
5
Heat on surface of product:
English
• The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly
warm, but this does not indicate a fault.
Screen on connected TV:
• Never leave the disc navigation screen, still image or camera image displayed on your TV to which
the DVD video camera/recorder is connected: Doing so could result in displayed image retention
or phosphor degradation of TV screen.
Be careful of ambient temperature:
• Using the DVD video camera/recorder in a place where the temperature is over 40ºC or under 0ºC
will result in abnormal recording/playback.
• Take care that the temperature of this DVD video camera/recorder, when connected to PC does
not rise excessively (reference for usage: approx. 30 minutes at about 30ºC).
• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the
temperature is very high for a long time: This could cause malfunctions.
Do not point directly at the sun:
• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction
or a fire could occur.
• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This
could cause malfunctions.
Do not use the DVD video camera/recorder near TV or radio:
• This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD video camera/recorder near strong radio waves or magnetism:
• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near a
radio wave tower or electric appliances, noise could enter video and audio that are being recorded.
During playback of normally recorded video and audio, noise may also be present in picture and
sound.
At worst the DVD video camera/recorder could malfunction.
Do not expose the DVD video camera/recorder to soot or steam:
• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.
Do not use the DVD video camera/recorder near corrosive gas:
• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated
by petrol or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot spring
area, the external or internal terminals could corrode, which would disable normal operation, or
the battery connecting terminals could corrode, so power will not turn on.
Do not use the DVD video camera/recorder near ultrasonic humidifier:
• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the
air, and white particles could adhere to the optical head of the DVD video camera/recorder, which
could cause it to operate abnormally.
Do not expose the DVD video camera/recorder to insecticide:
• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block,
and in such a case the DVD video camera/recorder might not operate normally. Turn the DVD
video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.
Do not use a generally available 8 cm CD lens cleaner:
• Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.
• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.
• If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.
6
• When you move the DVD video camera/recorder between places where the difference in
temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or
vehicle – condensation (vapour in air warmed or cooled to water droplets) could occur on the lens
and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of
disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft,
dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may
remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2
hours before using it again.
Do not use the DVD video camera/recorder for a long uninterrupted period of time:
• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance
camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video
camera/recorder could exceed the limit and the recording/playback operation may slow down or
other faults could occur. If this happens, turn it off and wait for a while before using it again.
Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or
CARD ACCESS indicator is lit or blinking:
• The ACCESS/PC or CARD ACCESS indicator is lit or
blinking to show that data is being written to disc or card,
or being read from it. At this time, do not do any of the
following, so as not to damage the data:
− Remove battery
− Disconnect AC adapter/charger
− Plug or unplug PC connection cable
− Remove disc or card
− Subject DVD video camera/recorder to severe
vibrations or impact.
− Violently open or close the LCD monitor
If you turn the DVD video camera/recorder off while the
ACCESS/PC or CARD ACCESS indicator is lit or blinking,
turn it on again with the disc or card loaded in it: Repair of
the disc or card will be executed automatically (see
page 157).
ACCESS/PC
indicator
CARD ACCESS indicator
7
English
Be careful of moisture condensation:
Do not wipe the DVD video camera/recorder case with benzene or thinner:
English
• The coating of case could peel off or the case surface could deteriorate.
• When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
• For optional accessories, observe the cautions and follow instruction manuals attached.
The battery provided has not been charged at time of purchase:
• Charge it before using the DVD video camera/recorder (see page 42).
• The battery will discharge as time passes. (The battery is produced so that it discharges on its own
in order to protect its characteristics.)
Disc cannot be inserted or removed unless a charged battery or AC adapter/
charger is connected to the DVD video camera/recorder.
Be sure to set the power switch to “OFF” when turning the DVD video camera/
recorder off:
• Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being
powered could cause a fault.
8
English
Cautions When Storing
Do not leave the DVD video camera/recorder in a place where the temperature is
very high for a long period of time:
• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave
the DVD video camera/recorder in such a place, it could malfunction or the case could be
damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a
heater.
Do not store the DVD video camera/recorder in a place where the humidity is high
or in a dusty place:
• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,
the lens could be moldy, and the DVD video camera/recorder could become inoperable. It is
recommended that you put the DVD video camera/recorder with desiccant in a box when storing
it in a closet, etc.
Do not store the DVD video camera/recorder in a place subject to strong
magnetism or intense vibrations:
• This could cause malfunctions.
Detach the battery from the DVD video camera/recorder and store it in a cool place:
• Leaving the battery attached or storing it at high temperature could shorten its life.
9
English
Suggestions and Restrictions
Make a trial recording:
• Always make a trial recording before doing actual recording to make sure that recording is normal.
The data that have not been stored normally because of a defect in the DVD video camera/
recorder cannot be restored.
It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for
trial recording.
Do not use the DVD video camera/recorder for professional applications:
• This DVD video camera/recorder is designed and produced for home-use recording and playback.
The recorded contents cannot be compensated for:
• Hitachi cannot compensate for any damages caused when recording is not made normally or
recorded contents cannot be played back because of a defect in the DVD video camera/recorder,
disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.
• If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card,
etc., the recorded contents may be lost. We cannot be responsible for compensation for damage due
to loss of recorded contents.
Copyright:
• Data recorded on the disc or card in this DVD video camera/recorder using other digital/analog
media or devices are protected by the copyright act and cannot be used without permission of the
owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some
demonstrations, performances and exhibitions, even for personal enjoyment.
10
English
Read This First
To guide you, we have included following six chapters.
• The section on “Setups” explains how to set
up the DVD video camera/recorder, battery,
and set the date/time.
• The section on “Basic Techniques” explains the
basic operation of this DVD video camera/
recorder – recording of movies, still images
and playback of recorded images.
• The section on “Advanced Techniques”
explains settings on this DVD video camera/
recorder for more advanced usage.
• The section on “Disc Navigation” explains
editing with Disc Navigation: Refer to this
section when finalising DVD-R disc and
initialising DVD-RAM disc.
• The section on “Connecting to PC” explains
the contents of provided CD-ROM and how to
install the software included.
• “Subsidiary Information” includes an
introduction to products sold separately,
proper cleaning, and troubleshooting.
We want this manual to be as helpful as
possible, so it includes two easy ways to find the
information you need:
• A quick index for the information you use
most often (this page).
• A detailed table of contents directing you to
specific information quickly (see pages 14 –
16).
Get to know your DVD video camera/recorder by
using this manual, and get to know Hitachi. We
appreciate your business.
Quick Index
Available Discs ................................................ 27
Recording Movie ............................................. 52
Playing Back.................................................... 61
Connecting to a TV.......................................... 79
Functions Available with Disc Navigation ...... 104
Connecting to PC .......................................... 135
With this DVD video camera/recorder you can view the picture being recorded or the playback
picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor
switches the picture to appear on the LCD monitor or in the viewfinder. The following text
describes the operation assuming that the viewfinder is used as a major monitor device.
It is possible to switch the language in the on-screen display of this DVD video camera/recorder
(see page 98).
Microsoft®, Windows®, Windows® 98, Windows® 98 Second Edition, Windows® Me, Windows®
2000 Professional, and Windows® XP are registered trademarks of Microsoft Corporation.
Intel®, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation.
IBM® and PC/AT® are registered trademarks of International Business Machines Corporation.
Manufactured under licence from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each
individual company.
SD logo is a trademark.
11
English
Introduction
●You can start recording immediately after stopping playback (p. 52, 61)
Unlike tape devices, you do not need to search for the recording start position or locate the
beginning of blank portion.
You can stop playback and immediately start recording: New recording will not overwrite any
previously recorded data.
Recorded scenes
If you stop playback midway and start recording, overwrite will not occur.
●You can immediately play back desired recorded scenes (p. 102)
You do not need to rewind, unlike recorders using tape.
You can select any scene you want and immediately play it back (using Disc Navigation function).
●Use Disc Navigation to create your original movie (p. 121)
You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play
List).
Before editing
After editing
12
●Create original DVDs on PC
(p. 144)
Using this DVD video camera/recorder, you can
collect scenes of your child, for example, on play
list of Disc Navigation function and create an
original movie: Then simply play back the play
list and dub it on VCR or DVD recorder.
You can create an original DVD, using the
provided software CD-ROM.
The created DVD disc can be played back on
DVD player/recorder, DVD-ROM drive, etc.
Up to now, you had to
repeatedly press
buttons
With a DVD, you can
simply play it back on this
DVD video camera/
recorder: Press the record
button on VCR or DVD
recorder.
Original DVD being
created
Playback of DVD
13
English
●You can easily edit scenes, which
is quite difficult with tape (p. 82)
English
Table of Contents
Important Information......................................... 2
For Your Safety.................................................. 2
Precautions........................................................ 2
IMPORTANT SAFETY INSTRUCTIONS........... 4
Cautions When Using ........................................ 5
Cautions When Storing...................................... 9
Suggestions and Restrictions .......................... 10
Read This First ................................................ 11
Introduction ...................................................... 12
Table of Contents ............................................ 14
About This Manual........................................... 17
Checking Provided Accessories ...................... 18
Names of Parts ................................................ 19
Try Recording and Playing Back using Disc
(Video and Photo) ......................................... 23
Try Recording and Playing Back using Card
(Photo) .......................................................... 25
Discs and Cards .............................................. 27
AVAILABLE DISCS ............................................. 27
INFORMATION ON DVD-R DISC ....................... 28
EXAMPLES OF DISCS THAT CANNOT BE
USED ON THIS DVD VIDEO
CAMERA/RECORDER:.................................... 28
HANDLING DISCS .............................................. 29
DISC CLEANING................................................. 29
AVAILABLE CARDS............................................ 30
Storage Capacity on Disc or Card ................... 31
RECORDABLE TIME OF MOVIE (VIDEO) ......... 31
RECORDABLE STILLS (PHOTOS) ON DISC .... 31
RECORDABLE STILLS (PHOTOS) ON CARD... 32
SIZE AND QUALITY OF PHOTOS ..................... 33
Setups
Setting Up the DVD Video Camera/
Recorder ....................................................... 34
HOLDING DVD VIDEO CAMERA/
RECORDER ..................................................... 34
ATTACHING SHOULDER STRAP ...................... 35
ATTACHING LENS CAP ..................................... 35
INSERTING BATTERY INTO REMOTE
CONTROL ........................................................ 36
REMOVING BATTERY FROM REMOTE
CONTROL ........................................................ 36
VIEWING IMAGE ON LCD MONITOR
SCREEN........................................................... 38
CLOSING LCD MONITOR .................................. 39
VIEWING SUBJECT THROUGH
VIEWFINDER ................................................... 39
SETTING DATE AND TIME ................................ 40
CHANGING DISPLAY FORMAT OF DATE
AND TIME......................................................... 41
Setting Up the Battery...................................... 42
CHARGING BATTERY........................................ 42
14
ATTACHING BATTERY TO DVD VIDEO
CAMERA/RECORDER ..................................... 43
REMOVING BATTERY........................................ 43
BATTERY REMAINING LEVEL INDICATOR...... 45
EFFICIENT USE OF BATTERY .......................... 45
USING DVD VIDEO CAMERA/RECORDER
WITH AC ADAPTER/CHARGER...................... 46
Turning DVD Video Camera/Recorder On
and Off........................................................... 47
Inserting and Removing Disc ........................... 48
INSERTING DISC................................................ 48
REMOVING DISC................................................ 50
Inserting and Removing Card .......................... 51
Basic Techniques
Recording Movie .............................................. 52
Recording Stills ................................................ 54
On-Screen Information .................................... 55
INFORMATION DISPLAY DURING
RECORDING .................................................... 55
Zooming........................................................... 59
MACRO RECORDING ........................................ 60
RECORDING SUBJECTS FOR STRONGER
WIDE-ANGLE OR TELEPHOTO EFFECT ....... 60
Playing Back .................................................... 61
PLAYING BACK .................................................. 61
PLAYBACK FROM START OF DISC OR
CARD................................................................ 62
SEARCH PLAYBACK OF MOVIE ....................... 62
FRAME ADVANCE/FRAME BACK/SLOW
PLAYBACK OF MOVIE .................................... 62
SKIP PLAYBACK OF MOVIE .............................. 63
PLAYING BACK STILLS ..................................... 63
JUMPING TO SPECIFIED POINT (GO TO)........ 64
On-Screen Information Display........................ 65
INFORMATION DISPLAY DURING
PLAYBACK ....................................................... 65
Checking Flow of Quick Menu ......................... 66
Camera Functions
FLOW OF QUICK MENU WHEN RECORDING
MOVIE: ............................................................. 68
FLOW OF QUICK MENU WHEN RECORDING
PHOTO (DISC): ................................................ 69
FLOW OF QUICK MENU WHEN RECORDING
PHOTO (CARD): .............................................. 70
Disc Navigation Functions
FLOW OF QUICK MENU
(WITH DVD-RAM DISC): .................................. 71
FLOW OF QUICK MENU
(WITH DVD-R DISC): ....................................... 72
FLOW OF QUICK MENU
(WITH CARD): .................................................. 73
Manually Focusing Subject.............................. 74
FOCUSING DURING RECORDING.................... 74
CONNECTING TO A TV...................................... 79
VIEWING ON TV SCREEN ................................. 80
Playback on DVD Recorder/Player ..................81
PLAYING BACK DVD-RAM DISC ....................... 81
PLAYING BACK DVD-R DISC ............................ 81
Recording (Dubbing) Images ...........................82
RECORDING (DUBBING) IMAGES ON
OTHER VIDEO DEVICES ................................ 82
Advanced Techniques
Checking Flow of Normal Menu .......................83
Camera Functions
Setting Up Camera Functions ..........................85
SELECTING SHOOTING MODE TO MATCH
THE SUBJECT
(SWITCHING PROGRAMME AE MODE) ........ 85
RECORDING DARK SUBJECTS USING LCD
MONITOR LIGHT ............................................. 86
ADJUSTING COLOUR (WHITE BALANCE) ....... 87
USING THE ELECTRONIC IMAGE
STABILISER (EIS)............................................ 89
RECORDING SUBJECT USING LARGE
MAGNIFICATION (DIGITAL ZOOM) ................ 89
REDUCING WIND NOISE DURING
RECORDING (MIC.FILTER) ............................ 89
Setting Up Record Functions ...........................90
SWITCHING MOVIE QUALITY
(VIDEO MODE) ................................................ 90
SETTING TO WIDE TV SCREEN MODE
(16:9 MODE)..................................................... 91
SWITCHING QUALITY OF STILL IMAGE
(QUALITY) ........................................................ 93
SELF-TIMER ....................................................... 93
SETTING ON-SCREEN DISPLAY OUTPUT ON
OR OFF (OSD OUTPUT) ................................. 94
RESETTING MENU SETTINGS TO
DEFAULTS (RESET)........................................99
Disc Navigation
Using Disc Navigation ................................... 100
STARTING OR TERMINATING DISC
NAVIGATION..................................................100
PLAYING BACK FROM DISC NAVIGATION
SCREEN .........................................................102
SELECTING MULTIPLE SCENES ....................103
SELECTING CONSECUTIVE SCENES
TOGETHER ....................................................103
FUNCTIONS AVAILABLE WITH DISC
NAVIGATION..................................................104
UNDERSTANDING FLOW OF DISC
NAVIGATION MENU ......................................105
Scene ............................................................ 107
DELETING SCENES (EDIT – DELETE) ...........107
DIVIDING MOVIES (EDIT – DIVIDE) ................109
COMBINING MULTIPLE SCENES
(EDIT – COMBINE).........................................110
ARRANGING ORDER OF SCENES
(EDIT – MOVE)...............................................110
DIRECTING SCENES EFFECTIVELY
(EFFECT – FADE) ..........................................111
PLAYING BACK BY SKIPPING SCENES
(EFFECT – SKIP) ...........................................112
CHANGING IMAGES FOR THUMBNAILS
(EFFECT – THUMBNAIL)...............................113
COPYING STILLS ON DVD-RAM DISC TO
CARD (COPY) ................................................114
LOCKING SCENES ON CARD (LOCK) ............115
SELECTING SCENES USING MENU SCREEN
(SELECT)........................................................116
DISPLAYING INFORMATION USING MENU
SCREEN (DETAIL) .........................................117
Programme.................................................... 118
WHAT IS “PROGRAMME”? ..............................118
SWITCHING TO THUMBNAIL DISPLAY OF
SPECIFIC DATE (SWITCH) ...........................118
PLAYING BACK PROGRAMME (PLAY) ...........119
CHANGING TITLE OF PROGRAMME
(TITLE)............................................................119
LCD/EVF Setup................................................95
Play List......................................................... 121
SETTING BRIGHTNESS OF LCD SCREEN
(LCD BRIGHTNESS)........................................ 95
SETTING BRIGHTNESS OF VIEWFINDER
(EVF BRIGHTNESS) ........................................ 95
SETTING COLOUR DENSITY
(COLOUR LEVEL)............................................ 96
ALWAYS DISPLAYING IMAGE IN
VIEWFINDER ................................................... 96
WHAT IS “PLAY LIST”?.....................................121
CREATING NEW PLAY LIST (CREATE) ..........121
SWITCHING TO DISPLAY OF EACH PLAY
LIST (SWITCH)...............................................122
PLAYING BACK A PLAY LIST (PLAY)..............122
ADDING SCENES TO PLAY LIST
(EDITING PLAY LIST) ....................................123
DELETING SCENES FROM PLAY LIST
(EDITING PLAY LIST) ....................................124
ADDING SCENES USING SUBMENU
FOR EDITING (EDITING PLAY LIST) ............124
DELETING SCENES USING SUBMENU
FOR EDITING (EDITING PLAY LIST) ............125
SELECTING SCENES USING SUBMENU
FOR EDITING (EDITING PLAY LIST) ............125
ARRANGING ORDER OF SCENES (MOVE) ...126
CHANGING TITLE OF PLAY LIST (TITLE).......127
Initial Settings...................................................97
SWITCHING OPERATING SOUND ON OR
OFF (BEEP)...................................................... 97
TURNING DVD VIDEO CAMERA/RECORDER
OFF AUTOMATICALLY (POWER SAVE) ........ 97
TURNING RECORD LED ON OR OFF
(RECORD LED)................................................ 98
CHANGING DISPLAY LANGUAGE
(LANGUAGE) ................................................... 98
15
English
Adjusting Brightness of Image to be recorded
(Exposure) .....................................................76
Compensating for Backlight .............................76
Using External Microphone ..............................77
Built-in Video Flash (for DZ-GX20E only) ........78
Viewing on TV Screen......................................79
TOC
DELETING PLAY LIST (DELETE) .................... 127
English
Go To............................................................. 128
TOP (END) ........................................................ 128
Disc or Card Management............................. 129
INITIALISING DISC OR CARD
(FORMAT DISC. FORMAT CARD) ................ 129
PROTECTING DISC FROM WRITING
(PROTECT DISC)........................................... 130
VERIFYING REMAINING FREE SPACE ON
DISC OR CARD (CAPACITY) ........................ 130
UPDATING CONTROL INFORMATION OF
DVD-RAM DISC
(UPDATE CONTROL INFO.).......................... 131
FINALISING DVD-R DISC (FINALIZE DISC).... 132
Others ............................................................ 133
DISPLAYING MOVIES OR STILLS
INDEPENDENTLY (CATEGORY) .................. 133
PLAYING BACK SCENES REPEATEDLY
(REPEAT PLAY)............................................. 133
SLIDE SHOW (CONTINUOUS PLAYBACK OF
STILLS)........................................................... 134
Connecting to PC
(DZ-GX20E/MV780E/MV750E)
THE FOLLOWING ARE AVAILABLE WHEN
CONNECTING TO PC.................................... 135
Contents on Provided CD-ROM .................... 137
Installing Software ......................................... 139
DISPLAYING INSTALLER SCREEN ................ 139
INSTALLING SOFTWARE ................................ 140
Creating DVD Video from DVD-RAM Disc
Recorded on DVD Video Camera/
Recorder ..................................................... 144
Uninstalling Software ..................................... 146
Cautions When Using DVD Video Camera/
Recorder by Connecting It to PC ................ 146
Introduction to Video Editing Software........... 147
Subsidiary Information
Introduction to Optional Accessories ............. 148
CAMERA ACCESSORIES ................................ 148
POWER SUPPLY.............................................. 148
Removing Disc from Its Package................... 149
REMOVING AND REPLACING FROM/IN
ROUND DVD HOLDER .................................. 149
REMOVING DISC FROM CARTRIDGE............ 150
Cleaning......................................................... 150
Changing Setting of Demonstration............... 151
Terminology ................................................... 152
No DVD Video Camera/Recorder Operation –
Check the Following:................................... 155
Trouble Messages ......................................... 157
Troubleshooting ............................................. 164
System Reset ................................................ 170
Major Specifications....................................... 171
Index .............................................................. 174
16
Be sure to read the following before opening
the package of CD-ROM ............................. 176
English
About This Manual
●Displays in this manual
Understand that the displays are different from those you will actually see in the viewfinder or on
the LCD screen.
●Notation of cancel button
Press the stop/cancel button to stop your operation midway, or return the menu screen to the
preceding one. The expression “press the C button” will be used in this text.
● 1, 2 and 3 marks beside headings
Some functions of this DVD video camera/recorder are unavailable with disc or card used. Refer to
the marks at right above each function to identify whether the disc or card is compatible with the
function. Refer to these marks and identify the functions and operation to match the disc or card you
use.
●Illustrations in this manual
Although the external appearances of DZ-GX20E, DZ-MV780E, DZ-MV750E, and DZ-MV730E are
different, the method of operating these models is identical.
The illustrations of DZ-GX20E are used for the explanation in this text.
● This instruction manual shows eight DVD video camera/recorder models - DZ-GX20E, DZ-
MV780E, DZ-MV750E, DZ-MV730E, DZ-GX20E (UK), DZ-MV780E (UK), DZ-MV750E (UK), and
DZ-MV730E (UK).
The DZ-GX20E and DZ-GX20E (UK) functions and specifications are referred to as “DZ-GX20E”.
The DZ-MV780E and DZ-MV780E (UK) functions and specifications are referred to as “DZMV780E”.
The DZ-MV750E and DZ-MV750E (UK) functions and specifications are referred to as “DZMV750E”.
The DZ-MV730E and DZ-MV730E (UK) functions and specifications are referred to as “DZMV730E”.
No model names are mentioned for functions and specifications common to all models; if there are
any differences between models, the model names are specified.
17
English
Checking Provided Accessories
Make sure that you have all the following accessories in package:
Battery (model DZ-BP14S):
For DZ-GX20E only.
Portable power supply for this DVD video
camera/recorder. Charge it before use.
Battery (model DZ-BP7S):
For DZ-MV780E, DZ-MV750E or DZMV730E only. Portable power supply for
this DVD video camera/recorder. Charge it
before use.
DC power cord:
When powering the DVD video camera/
recorder from household AC outlet, use
this cord to connect the DVD video
camera/recorder and AC adapter/charger.
Mains lead:
Connect between household AC outlet and AC adapter/charger.
Infrared remote control
(model DZ-RM4W):
Use to control the DVD video camera/
recorder from a distance. For DZ-GX20E,
DZ-MV780E or DZ-MV750E only.
Lithium battery (model CR2032):
To power the remote control.
For DZ-GX20E, DZ-MV780E or DZMV750E only.
Shoulder strap:
Attach to the DVD video camera/recorder
to hang it from shoulder.
Lens cap and lens cap string:
Attach the lens cap when not recording, to
protect the lens.
Single-sided 8 cm DVD-R disc:
To record videos (movies) on this DVD
video camera/recorder.
For DZ-GX20E, DZ-MV780E or DZMV750E only.
Software CD-ROM:
Use this CD-ROM when connecting the
DVD video camera/recorder to PC. For DZGX20E, DZ-MV780E or DZ-MV750E only.
PC connection cable:
Use this cable when connecting the DVD
video camera/recorder to PC. For DZGX20E, DZ-MV780E or DZ-MV750E only.
Disc cleaning cloth:
Always use this to clean discs.
18
for DZ-GX20E,
DZ-MV780E,
DZ-MV750E,
and DZ-MV730E
AC adapter/charger
(model DZ-ACS2 (E)):
Used to power the DVD video camera/
recorder from AC outlet, or charge battery.
for DZ-GX20E (UK),
DZ-MV780E (UK),
DZ-MV750E (UK),
and DZ-MV730E (UK)
WARNING: Keep
this battery away
from children. If
swallowed, consult
a physician
immediately for
emergency
treatment.
AV/S output cable:
Used when viewing the picture played back
on the DVD video camera/recorder on TV
screen, or output video to another video
device.
7
8
9
English
Names of Parts
10
DISC N
TIO
NAVIGA
SELECT
XIT
STOP/E
MENU
1 2
3
4
6
5
11
12
13
(Inside the cover)
1 Light receiving sensor
(for DZ-GX20E only)
This sensor controls the amount of light to be
emitted from the built-in flash. Take care not
to block with hand, etc. during recording.
2 Flash (for DZ-GX20E only) (p. 78)
3 Lens cap string attachment hole (p. 35)
4 Stereo microphone (p. 53)
5 Recording indicator (p. 98)
The red indicator will light during recording.
6 Infrared receiver (p. 37)
When the remote control is used to operate
the DVD video camera/recorder, this
receiver will receive the infrared signal.
7 Optical 10× zoom lens
(for DZ-GX20E or DZ-MV780E only)
Optical 16× zoom lens
(for DZ-MV750E or DZ-MV730E only)
(p. 59)
8 Lens hood (p. 60)
Always remove this lens hood when using
generally available tele-conversion or wideconversion lens.
14
9 Zoom lever (p. 59)
Push the lever to the T side for telephoto, or
to the W side for wide-angle.
10 Accessory shoe (p. 78)
For DZ-GX20E, DZ-MV780E only:
The optional video flash can be attached
here. (See the instruction manual of device to
be attached for details.)
11 PC connection terminal (TO PC) (p. 146)
[for DZ-GX20E, DZ-MV780E or DZ-MV750E
only]
12 AV output jack (p. 79)
13 External microphone jack (p. 77)
14 2.5" type liquid crystal display (inside)
(p. 38)
Although the external appearances of DZGX20E, DZ-MV780E, DZ-MV750E and DZMV730E are different, the method of
operating both models is identical. DZGX20E illustrations are used in this manual.
19
English
15
16
17
ACCESS
/PC
DISC EJ
ECT
21
22
23
24
15 Viewfinder (p. 39)
16 Dioptre control (p. 39)
To adjust the focus of image appearing in the
viewfinder. (Pull out the viewfinder.)
18
19
20
O
PHOT
25
26
21 BATTERY EJECT button (p. 43)
Press this button when removing the battery.
22 Battery attachment platform (p. 43)
23 Record button (REC) (p. 52)
17 ACCESS/PC indicator (for DZ-GX20E, DZMV780E or DZ-MV750E only)
ACCESS indicator (for DZ-MV730E only)
(p. 7, 52, 54)
Will blink or light when the disc in DVD
video camera/recorder is accessed (write or
read is executed) or the DVD video camera/
recorder is connected to PC.
18 PHOTO button (p. 54)
19 DISC EJECT button (p. 48)
Press down and release this button to open
the disc guide.
20 Disc insertion block (p. 48)
20
24 LOCK switch (p. 53)
It is recommended that you set the LOCK
switch to L (to the upper position) to prevent
the power switch in the “O” position from
accidentally moving to “N”.
25 Power switch (p. 47)
26 Hand strap (p. 34)
28
29
30 31 32
33
English
27
DISC
NAVIGATION
SELECT
STOP/EXIT
MENU
QUICK
MENU
FOCUS EXPOSURE
BLC
VOL.
DISPLAY
34
35
36
37
27 QUICK MENU button (p. 66)
To display only the functions that you
frequently use (simple menus).
28 FOCUS button (p. 74)
To switch between manual focus and autofocus.
29 MENU button (p. 40, 83, 108)
Press this button to display the menu for
setting camera functions and Disc
Navigation.
30 SELECT button (p. 103)
31 DISC NAVIGATION button (p. 100)
32 Stop/cancel button (p. 17, 61, 67)
To end playback or cancel setting of menu.
33 EXPOSURE button (p. 76)
Press this button to adjust the exposure.
34 Speaker (p. 61)
35 RESET button (p. 170)
To reset all settings to defaults (status when
the DVD video camera/recorder was
shipped from the factory)
38
39
40
41
42
36 DISPLAY (Screen display) button (p. 65)
Press this button to display the details of
image being played back or camera setting
status, or switch the display off.
37 CARD ACCESS indicator (p. 7, 54)
38 Volume control buttons (VOL)/
S R buttons (p. 61, 74, 76)
To adjust the volume of sound from speaker,
etc.
39 Card insertion block (p. 51)
40 BLC (backlight compensation) button
(p. 76)
Press this button when subject is being
lighted from rear.
41 f / e / d / c / A buttons
(p. 40, 61, 67, 83)
Use these buttons to select a scene or menu
item, and then press the centre (A) to play
back the scene, or designate an option from
the menu.
42 Tripod threaded hole
Used to attach the DVD video camera/
recorder to a tripod.
21
English
43
REC
PHOTO
DISPLAY
MENU
DIGITAL
ZOOM
ZOOM
50
44
45
SELECT
46
47
DELETE
48
DISC
NAVIGATION
51
52
53
54
55
56
57
58
49
43 PHOTO button (p. 54)
51 ZOOM T button (p. 59)
44 REC button (p. 52)
52 DIGITAL ZOOM button (p. 59)
45 MENU button (p. 40, 83, 108)
53 ZOOM W button (p. 59)
46 SELECT button (p. 103)
54 Reverse skip button (p. 63)
47 Reverse search button (p. 62)
55 Forward search button (p. 62)
48 DELETE button (p. 107)
56 Play/pause button (p. 61)
49 DISC NAVIGATION button (p. 100)
57 Stop button (p. 17, 61, 67)
50 DISPLAY button (p. 65)
58 Forward skip button (p. 63)
* The buttons on remote control will function the same as those on DVD video camera/recorder.
22
English
12
Try Recording and Playing Back using Disc
(Video and Photo)
Before You Begin
• It is recommended that you use a DVD-RAM disc for trial recording,
since you can delete the recorded contents (p. 27).
You can record both videos and photos on DVD-RAM disc; only videos on DVD-R disc.
1 Connect a power supply (p. 46).
Mains lead
1
2
4
To AC outlet
3
AC adapter/charger
* The shape of plug
varies depending
on the model.
DC power cord
2 Insert a disc (p. 48).
1 Press down the DISC EJECT button once
and release it.
3 Push the disc against the turntable at the
centre of disc insertion block to lock it
until a click is heard, and then close the
cover of disc insertion block: Do not touch
the disc recording surface or pickup lens
at this time.
Disc cover
DISC EJECT
2 Gently open the cover until it stops.
Turntable
23
English
3 Start recording (p. 52).
1 Open the LCD monitor (p. 38), or pull out
the viewfinder (p. 39).
2 While holding down the button on the
right of power switch, set the switch to
“O” or “N” (only “O” for DVD-R disc).
OFF
OFF
3 When recording a video, press the REC
button.
Recording will start.
Pressing the REC button again will stop
recording (O).
When recording a photo, press the
PHOTO button.
Pressing PHOTO half way (half press)
allows you to focus the subject, and the
“m” indicator will turn purple. Press
PHOTO all the way down to record.
OFF
Note:
• When using an unformatted disc, format (initialise) it on this DVD video camera/recorder.
If unformatted disc is inserted into this DVD video camera/recorder, a message will appear: Format the disc
following the instructions on screen (p. 49, 129). Initialising the DVD-RAM disc will erase all the recorded
contents: Make sure the contents on disc are not valuable before initialising the disc.
• See Check 1 on p. 155 if recording is not possible with “O”.
• See Check 2 on p. 155 if recording is not possible with “N”.
4 View the playback of recorded content on LCD monitor screen (p. 38).
1 After recording is finished, press the A
button.
The recorded scene will be played back.
2 Press the C button to stop playback.
2
STOP/EXIT
24
1
English
3
Try Recording and Playing Back using Card
(Photo)
Photos can only be recorded on card sold separately.
1 Connect a power supply (p. 46).
Mains lead
1
2
4
To AC outlet
3
AC adapter/charger
* The shape of plug
varies depending
on the model.
DC power cord
2 Insert a card (p. 51).
1 Open the LCD monitor (p. 38).
2 Open the cover of card insertion block
with power turned off.
3 Put in a card.
4 Insert the card all the way until it locks,
and then close the cover of card insertion
block.
25
1 Open the LCD monitor (p. 38).
2 While holding down the button on the
right of power switch, set the switch to
“P”.
OFF
3 Press the PHOTO button half way (half
press): When a subject image is focused,
the “m” indicator will turn purple.
4 Press the PHOTO button all the way (full
press).
OF
F
English
3 Start recording (p. 54).
Note:
• With the DZ-GX20E only, the built-in flash may emit light in a dark area (see page 78).
• See page 27 for the cards that can be used on this DVD video camera/recorder.
• See Check 2 on p. 155 if recording is not possible with “P”.
4 View the playback of recorded content on LCD monitor screen (p. 38).
1 Press the A button in recording pause
status: The recorded scene will be played
back.
2 Press the C button to stop playback.
2
STOP/EXIT
26
1
English
Discs and Cards
The following table lists the storage media (discs and cards) that can be used on this DVD video
camera/recorder and the functions which are available with them:
Media
DVD-RAM disc
DVD-R disc
SD memory card
Deleting and editing images
Function
∴
×
∴
Playing back on other DVD
devices
Possible on
compatible machine*1
∴*2
×*4
Initialisation
Unnecessary*3
Necessary
Unnecessary*3
Finalisation
Unnecessary
Necessary
Unnecessary
∴: Functions available; ×: Not available
*1:
Can be played back on DVD players with a logo
, or DVD recorders with a logo
. Not playable on those
machines, however, if they are not compatible with 8 cm DVD-RAM discs.
*2: Must be finalised (see “Terminology”, p. 152) on this DVD video camera/recorder before DVD-R disc can be
played back on DVD player or DVD recorder (see page 132). May not be playable on some DVD players or DVD
recorders.
*3: When using media sold on market as labelled “formatted”. The media whose initialisation format is different can
be used only after they are formatted on this DVD video camera/recorder.
*4: Some DVD devices can play SD memory cards.
AVAILABLE DISCS
Available Discs
Usable discs and logos
DVD-RAM Ver. 2.1 (8 cm)
DVD-R [for General Ver. 2.0 (8 cm)]
This DVD video camera/recorder can use only
the 8-cm bare discs not packed in a square
cartridge, square caddy case or round DVD
holder. The discs in a square cartridge, square
caddy case or round DVD holder can be used if
they are removed from the package, but take
great care not to dirty or scratch the bare disc
(see pages 149 and 150).
Note:
• It is recommended that you use Hitachi Maxell HG
type single-sided discs, since their compatibility with
this DVD video camera/recorder has been confirmed.
When using an HG type double-sided disc, take great
care with handling it. Using a disc other than these
discs may not allow the DVD video camera/recorder
to deliver optimum performance.
• See page 28 for information on DVD-R disc.
27
English
INFORMATION ON DVD-R DISC
You cannot record a still on DVD-R disc, or
delete any recorded images or data.
For optimum recording on DVD-R disc, this
DVD video camera/recorder writes control data
to the disc in order to automatically make
adjustments when it is inserted and ejected
accompanying recording. If the disc has no area
to be written for adjustment, recording may not
be possible. To prevent this, do not insert or eject
a DVD-R disc accompanying recording more
than 100 times.
Although some models are compatible with the
VR mode using DVD-R disc, this DVD video
camera/recorder is not compatible with that
mode.
●Finalising DVD-R disc
Before using the 8 cm DVD-R disc provided on
this DVD video camera/recorder on a DVD
player or DVD video recorder that is compatible
with 8 cm DVD-R disc, the disc must be
finalised on this DVD video camera/recorder.
For the finalising procedure of 8 cm DVD-R disc,
refer to “FINALISING DVD-R DISC (FINALIZE
DISC)” (p. 132).
Note:
• When using an unformatted DVD-R disc, it is
necessary to format it on this DVD video camera/
recorder (see page 49).
• Do not insert a DVD-R disc recorded on this DVD
video camera/recorder but not finalised, into a
recordable device, such as a DVD recorder: The
recorded data may be damaged (except for devices
that allow playback of a DVD-R disc not finalised on
this DVD video camera/recorder).
• Use only DZ-GX20E, DZ-MV780E, DZ-MV750E or
DZ-MV730E to record on or finalize a DVD-R disc
recorded on this DVD video camera/recorder but not
finalized: Using any other device could damage the
data recorded on the disc.
• DVD-R discs edited and finalised on PC or those
finalised on another DVD recorder may not be
playable on this DVD video camera/recorder,
depending on the editing software used or recorded
status of DVD-R disc.
• If you insert a DVD-R disc recorded on a DVD video
camera/recorder other than DZ-GX20E, DZ-MV780E,
DZ-MV750E or DZ-MV730E and not finalised, the
Disc Navigation screen will automatically start, and no
recording can be done on the disc nor can it be
finalised.
EXAMPLES OF DISCS THAT CANNOT BE USED ON THIS DVD VIDEO
CAMERA/RECORDER:
•
•
•
•
•
•
•
•
•
•
DVD-RAM (2.6 GB) Ver. 1.0
CD-RW
DVD-R (3.9 GB) Ver. 1.0
CD
DVD-R (4.7 GB) for Authoring Ver. 2.0
LD
DVD-RW
MO
DVD+RW
MD
•
•
•
•
•
•
•
•
•
DVD+R
iD
DVD-ROM
Floppy disk
DVD-Video
Discs other than those with diameter of 8 cm
CD-R
CD-ROM
DVD-R (double-layered)
Note:
Discs recorded on PC or DVD recorder may not be
playable on this DVD video camera/recorder: If so,
message “This disc cannot be used.” will appear. Also,
blue thumbnails will appear (Fig. 1* on page 29), or
normal playback will not be possible.
28
●Using discs
DVD-RAM and DVD-R discs are very delicate
recording media. Carefully read the following
cautions and observe them:
• Always use a brand new disc when recording
important material.
• Be sure not to touch the recording surface of
disc, or dirty or scratch it.
• If there is dust, scratch, dirt on disc or if it is
warped, the following phenomena may occur:
− Block noise in playback
image
− Momentary stop of
playback image
− Sound interrupted during
playback, or abnormal
Block noise
sound
− Blue thumbnail
A l l Pr og r ams
0 01/ 006
display* (Fig. 1)
− Disc cannot correctly
be recognised
− Disc cannot be
RAM
PLAY
initialised
− Delay between video
Fig. 1
*
and audio
Even if disc is normal, the above phenomena
may occasionally occur. While the ACCESS/
PC indicator is lit, do not subject disc to
vibrations or impact, and avoid using DVD
video camera/recorder at extremely high or
low temperatures, or in environment where
condensation is likely to occur.
• When recording images,
A l l Pr ogr ams
001 / 002
the DVD video camera/
recorder may avoid the
portions of disc where
recording is not possible,
RAM
PLAY
due to dust, scratches,
etc. [It will pause m at (Recording one scene
may produce multiple
such a portion and
thumbnails.)
automatically restart
recording (n).]
This will cause recording to be interrupted for
several seconds to several minutes, and
multiple thumbnails will be created by one
recording session as shown above. In this case,
the recordable time on disc will decrease.
• Be careful when removing the disc since the
metal of removal slot of DVD video camera/
recorder, and disc itself, may be hot.
●Storing discs
• When storing disc, replace it in the plastic case
in which it was purchased.
• Be careful that no condensation occurs on disc.
• Do not place disc in following places:
− Direct sunlight for a long time
− Where humidity is high or in dusty place
− While there is heat from a heater, etc.
DISC CLEANING
Use the disc cleaning cloth provided to lightly
wipe off any dirt adhering to the disc as shown
in the figure. Do not wipe the disc with force:
Doing so could cause scratches.
Never use solvent (thinner, water, antistat or
detergent) for cleaning.
Lightly wash the dirty cleaning cloth with
detergent: The dirt removal capacity of the cloth
will improve (rinse the cloth well with water so
that no detergent remains).
Use the disc cleaning
cloth to clean from inner
to outer edges in axial
direction.
29
English
HANDLING DISCS
English
AVAILABLE CARDS
SD memory card can be used on this DVD video
camera/recorder.
When using an exclusive adapter, a miniSD
memory card can be used in the same way as an
SD memory card.
●Handling card
• Do not use cards other than
the designated ones.
• Be sure to use a brand new
card when recording vital
images.
• Do not touch the card
terminal or allow it to touch
Terminal
metal.
• Do not paste anything other
than exclusive label on label pasting portion.
• Do not subject card to impact, bend or drop it.
• Do not disassemble card or modify it.
• Do not expose card to water.
• Do not use or store card in the following
places:
− Where the temperature is high, such as in
vehicle at high temperatures, under burning
sun or near a heater.
− Where humidity is high, or in dusty place
• When the erasure prevention switch is locked,
no recording, deletion or editing will be
possible on the card: Only playback will be
possible.
Erasure prevention
switch
30
Locked status
●Common cautions for disc and card
• It is recommended that you create a backup
file for valuable data on hard disk of PC.
• Do not do the following, or the data on disc or
card may be damaged or lost:
− Do not remove the disc or card or turn DVD
video camera/recorder off during reading or
writing of data
− Do not use DVD video camera/recorder in a
place subject to static electricity or electrical
noise
− Do not have printing done at a print lab or
DPE service.
Note:
• This DVD video camera/recorder can play back image
data recorded on other digital cameras conforming to
the DCF (Design rule for Camera File system)
standard. The range of image data playable on this
DVD video camera/recorder is that with pixels from 80
horizontal × 60 vertical to 4000 horizontal × 3000
vertical.
• DCF is an integrated image file format of digital
cameras: Image files can be used on all digital
devices conforming to DCF.
• Image data edited on PC and certain types of image
data may not be visible on this DVD video camera/
recorder.
• The image data recorded on another device may not
be playable on this DVD video camera/recorder.
English
Storage Capacity on Disc or Card
RECORDABLE TIME OF MOVIE (VIDEO)
The recordable time will vary depending on the video recording quality: See page 90 for the setting
of video recording quality.
Movie recordable time on one disc (on single side) (when recording only movies)
Recording quality
Movie recordable time
Application
XTRA
Approx. 18 min *1
Best quality
FINE
Approx. 30 min *2
High quality
STD
Approx. 60 min *3
Standard quality
*1:
Variable bit recording (recording of more than 18 minutes may be possible because the transfer rate varies
automatically between approx. 3 – 10 Mbps)
*2: Fixed bit rate: Approx. 6 Mbps
*3: Fixed bit rate: Approx. 3 Mbps
Note:
• No movie can be recorded on SD memory card.
• Although the movie quality mode or wide-screen (16:9) mode can be changed midway for recording on DVD-RAM
disc, it cannot be changed on DVD-R disc once the mode has been selected.
• If you record in XTRA mode at high temperatures, the DVD video camera/recorder will heat up and the maximum
transfer rate will be limited to approx. 6 Mbps, so the best quality will not be obtainable.
• If a disc recorded is used at high temperatures, normal playback may be impossible: Turn the DVD video camera/
recorder off once, wait until the ambient temperature becomes lower, and then operate it again.
RECORDABLE STILLS (PHOTOS) ON DISC
●Number of recordable stills on one side of disc
DZ-GX20E: Can record up to approx. 750 photos.
DZ-MV780E/DZ-MV750E/DZ-MV730E: Can record up to approx. 999 photos.
If the disc still has free space after recording the above maximum number of photos on it, movies can
also be recorded on it.
31
English
RECORDABLE STILLS (PHOTOS) ON CARD
The number of recordable stills will vary depending on the recording quality: See page 93 for the
setting of recording quality.
For DZ-GX20E
Recording
quality
Capacity
64 MB
128MB
256 MB
512 MB
FINE
Approx. 13
16 MB
Approx. 29
32 MB
Approx. 60
Approx. 120
Approx. 240
Approx. 480
Approx. 900
1 GB
NORM
Approx. 18
Approx. 38
Approx. 80
Approx. 160
Approx. 320
Approx. 640
Approx. 1,200
ECO
Approx. 27
Approx. 58
Approx. 120
Approx. 240
Approx. 480
Approx. 960
Approx. 1,800
For DZ-MV780E
Recording
quality
Capacity
16 MB
32 MB
64 MB
128MB
256 MB
512 MB
FINE
Approx. 27
Approx. 58
Approx. 120
Approx. 240
Approx. 480
Approx. 960
Approx. 1,800
1 GB
NORM
Approx. 36
Approx. 76
Approx. 160
Approx. 320
Approx. 640
Approx. 1,280
Approx. 2,400
ECO
Approx. 54
Approx. 116 Approx. 240
Approx. 480
Approx. 960
Approx. 1,920
Approx. 3,600
For DZ-MV750E and DZ-MV730E
Recording
quality
Capacity
16 MB
32 MB
64 MB
128MB
256 MB
512 MB
FINE
Approx. 108 Approx. 232 Approx. 480
Approx. 960
Approx. 1,920 Approx. 3,840
NORM
Approx. 216 Approx. 464 Approx. 960
Approx. 1,920 Approx. 3,840 Approx. 7,680
ECO
Approx. 432 Approx. 928 Approx. 1,920 Approx. 3,840 Approx. 7,680 Approx. 15,360
1 GB
Approx. 7,500
Approx. 15,000
Approx. 30,000
(The numbers of recordable stills above are only for reference)
Note:
• Cards used on other devices can be used on this DVD video camera/recorder.
• No movie or music data recorded on card can be checked, viewed or heard on this DVD video camera/recorder.
In addition, no such a data file can be displayed on this DVD video camera/recorder.
• Use the remaining display function to check the remaining free space on disc before use. See “VERIFYING
REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)” on page 130.
• Some still data recorded on this DVD video camera/recorder may not be playable on another device.
32
The pixel size of stills (JPEG) that can be recorded on this DVD video camera/recorder is as follows:
Model
Pixel size
DZ-GX20E
1,600 × 1,200 pixels
DZ-MV780E
1,280 × 960 pixels
DZ-MV750E/DZ-MV730E
640 × 480 pixels
The following table shows the file size and quality of one still (JPEG) recorded on card:
File size
Quality
Application
DZ-GX20E
DZ-MV780E
DZ-MV750E/730E
FINE
Approx. 1,024 KB
Approx. 512 KB
Approx. 128 KB
NORM
Approx. 768 KB
Approx. 384 KB
Approx. 64 KB
When image quality is prioritised
Standard quality
ECO
Approx. 512 KB
Approx. 256 KB
Approx. 32 KB
When number of stills is prioritised
(quality will be slightly inferior)
Although still images are recorded on DVD-RAM disc only in the FINE mode, the quality mode can
be chosen when recording stills on card. (p. 93)
The file size of a photo recorded on DVD-RAM disc in “N” status is equal to or larger than that
recorded on card using the FINE quality in “P”.
* JPEG: Joint Photographic Experts Group.
JPEG is one of the photo image compression standards. It is widely used in digital still cameras since
JPEG files can be used on ordinary PC. When this DVD video camera/recorder records on DVDRAM disc in “N” status, a JPEG photo will be recorded, along with a photo that conforms to the
DVD video recording (DVD-VR) format which is used to be output to TV (see “Terminology”,
p. 152). Only JPEG photos will be recorded on SD memory card.
Note:
• No still can be recorded on DVD-R disc.
• Since the file size is restricted in all quality modes when recording photos on card (P), the quality of photos on
card may be inferior to those recorded on DVD-RAM disc (N).
33
English
SIZE AND QUALITY OF PHOTOS
English
Setups
This section explains preparations for recording – setting up the DVD video camera/recorder
and battery.
Setting Up the DVD Video Camera/Recorder
HOLDING DVD VIDEO CAMERA/RECORDER
Insert your right hand from the bottom of DVD video camera/recorder up to the base of your
thumb.
Put your hand in a position where you can easily operate the REC button and the Zoom lever.
Adjust the length of hand strap so that the DVD video camera/recorder is stable when you press the
REC button with your thumb.
Note:
Do not adjust the hand strap while holding the DVD
video camera/recorder: Doing this could cause the DVD
video camera/recorder to fall and be damaged.
34
Caution:
Do not lift the DVD video camera/recorder by
holding the viewfinder or LCD monitor: If the
viewfinder or LCD monitor comes off, the DVD video
camera/recorder will fall.
English
ATTACHING SHOULDER STRAP
Be sure to pass through the 2 slots.
Pass the shoulder strap through
the shoulder strap attachments.
ATTACHING LENS CAP
1 Attach the shorter end of lens cap string to
the lens cap.
2 Attach the longer end of lens cap string to the
attachment hole of DVD video camera/
recorder.
Shorter end
Longer end
3 Push the both sides of cap inward and attach
it over the lens.
Push and fit
Note:
• Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
• When recording, attach the lens cap to the hand strap
by hooking the tab inside the cap onto strap for
comfortable shooting.
35
English
INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote control.
1 While inserting a fine rod into the hole
3 Slide the cover to close it.
marked PUSH, pull the battery holder out
forward.
2 Insert the lithium battery with the positive R
terminal facing down.
Note:
The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible with
remote control: Replace the battery.
Battery holder
REMOVING BATTERY FROM REMOTE CONTROL
1 While pushing the battery holder, slide the
battery out.
Warning:
• KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
• IF SWALLOWED CONSULT A PHYSICIAN
IMMEDIATELY FOR EMERGENCY TREATMENT.
• BATTERY MAY EXPLODE IF NOT HANDLED
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE.
36
Note:
• Replace the battery with a Hitachi Maxell, Sony,
Panasonic, Sanyo, Toshiba CR2032, or Duracell
DL2032. Use of another battery may present a risk of
fire or explosion.
• Dispose of battery safely in accordance with local
laws. Do not dispose of in fire.
• Do not short circuit the battery.
• Do not hold the battery with the metallic tweezers.
• Keep the battery in a dark, cool, dry place.
• The remote control (DZ-RM4W) and lithium battery
(CR2032) are supplied only with the DZ-GX20E, DZMV780E and DZ-MV750E.
English
●Using Remote Control
Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote
controllable distance is up to 5 m.
10º
10º
15º
15º
Infrared receiver
p
Ap
Note:
• When using the remote control, make sure that the
infrared receiver on DVD video camera/recorder is not
exposed to direct sunlight or any intense light. If the
infrared receiver is subject to light stronger than the
infrared light from remote control, the DVD video
camera/recorder cannot be operated by remote
control.
• If there is an obstacle between the remote control and
infrared receiver on DVD video camera/recorder,
remote control may not be possible.
.
rox
5m
• The DVD video camera/recorder uses the “VCR2”
remote control code of Hitachi VCRs. If you use a
Hitachi VCR, etc. with remote control code set to
“VCR2”, a VCR placed near the DVD video camera/
recorder will also be operated by the remote control:
To prevent this, change the remote control code of the
VCR.
• The remote control (DZ-RM4W) and lithium battery
(CR2032) are supplied only with the DZ-GX20E, DZMV780E and DZ-MV750E.
37
English
VIEWING IMAGE ON LCD MONITOR SCREEN
If you open the LCD monitor, you can monitor subject image on the LCD screen.
1 Open the LCD monitor.
The LCD monitor has a portion where you
can hook your finger. Hook the finger there to
open the monitor.
●Range where the LCD monitor can
be moved
90º
The LCD monitor can be opened up to
approximately 90º.
If the LCD monitor is open 90º, it can be tilted
with the screen down as much as 90º, and can
also be tilted with screen up and turned up to
180° so the screen faces in the same direction as
the lens.
If the LCD monitor is turned 180º so the screen
faces in the same direction as the lens during
recording, subject image will also appear in the
viewfinder as a mirror image (left/right
reversed).
Tilt the LCD monitor to adjust its vertical angle
so that you can see the screen easily.
Note:
• If no image appears on LCD monitor screen, refer to
“Check 7” on page 156.
• If LCD monitor lights white, refer to page 86.
• Be sure to open the LCD monitor approximately 90º
before changing its vertical angle.
• Do not record for a prolonged time with the LCD
monitor turned approximately 180º in close contact
with the DVD video camera/recorder body: Doing this
could cause the DVD video camera/recorder and LCD
monitor to become hot.
38
Hook your finger
(Bottom)
90º
180º
Before closing the LCD monitor, be sure to reset
it at right angles to the DVD video camera/
recorder.
Replace the LCD monitor on the DVD video
camera/recorder with the LCD screen facing
inward until a click is heard.
Note:
• Be sure to return the LCD monitor at right angles to
the DVD video camera/recorder before closing it or
replacing it on the DVD video camera/recorder with its
screen facing outside. If the LCD monitor is tilted, it
cannot be closed to the DVD video camera/recorder.
• If the LCD monitor is not securely locked to the DVD
video camera/recorder, no image will appear in the
viewfinder.
VIEWING SUBJECT THROUGH VIEWFINDER
1 Pull out the viewfinder.
2 Turn the dioptre control knob to adjust the
Dioptre control
Viewfinder
focus to suit your eyesight.
Note:
• If no image appears in viewfinder, refer to “Check 6”
on page 156.
• If the LCD monitor is opened approximately 90º, the
viewfinder will be off: Turn the open LCD monitor 180º
so that it faces the same direction as the lens; the
image will appear in the viewfinder.
• Focusing will not be correct unless the viewfinder is
pulled out.
• See “LCD/EVF Setup” (on page 95) if you wish to
display images in the viewfinder regardless of
whether you open or close the LCD monitor.
Pull out the viewfinder
until a click is heard.
39
English
CLOSING LCD MONITOR
English
SETTING DATE AND TIME
Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
MENU
Use f / e / d / c buttons
to select, and then press A to
designate.
1 Turn the DVD video camera/recorder on.
2 Press the MENU button.
The menu screen will
appear.
Came r a F u nc t i on s
P r o g r am AE :
Wh i t e Ba l . :
EIS
:
D i g . Zo om :
M IC . F i l t e r :
ENTER
3 Use the f/e/d/
c buttons to choose
“Date Setup” and then
“Date Set”.
button to select the digit
you want to set in
sequence.
Se t u p
Auto
Auto
On
40x
Of f
RAM
Da t e Se t u p
Da t e Se t
Da t e Mode
ENTER
4 Press the c button.
RETURN
5 Press the d or c
RETURN
1 / 1 / 2005
12 : 00
RAM
Da t e Se t u p
The figure for the day
Da t e Se t
1 / 1 / 2005
12 : 00
Da t e Mode
will be selected.
[The digit that is
RAM
ENTER RETURN
highlighted first
depends on the date
display format (set up in Date Mode): The
digit on the left end of the date display will
be first highlighted.]
Note:
After setting the figure for the day, press the c
button to right to select the digit to be set. If you
press the A button after selecting the figure for
the day, the screen for verifying the set date will
appear instead of screen for setting month, year or
time.
40
Da t e Se t u p
Da t e Se t
Da t e Mode
30 / 9 / 2005
8 : 00
RAM
ENTER RETURN
Press the f or e
button to select the
number for current date/time, and then
repeat step 5 to set the current date and time.
Note:
To stop date/time setting midway, press the C
button.
6 After setting the current
date and time, press the
A button.
The screen for verifying
the set date will appear.
Da t e Se t
3 0 / 9 / 2005 8 : 0 0
Da t e s e t u p?
YES
NO
ENTER
RAM
7 If the displayed date and time are correct, use
press the d button to choose “YES”, and
then press the A button.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing “NO” will restore the menu screen.
Note:
This DVD video camera/recorder incorporates a
rechargeable battery to store the date and time in
memory. If this built-in battery is exhausted, the date
and time will be reset. To prevent this, connect the AC
adapter/charger to DVD video camera/recorder every 3
months, and leave them for at least 24 hours with the
DVD video camera/recorder turned off: The built-in
battery will be charged.
You can select one of three date display formats: day/month/year, month/day/year or year/
month/day. Associated with the selected date display, the time display format will also change as
follows:
Date display format
Example of display
D/M/Y
17:00
30/ 9/2005
M/D/Y
5:00PM
9/30/2005
Y/M/D
PM 5:00
2005/ 9/30
1 Press the MENU button.
3 Use the f/e/d/
c buttons to select the
desired date display
format, and then press
the A button.
The menu screen will appear.
2 Use the f/e/d/
c buttons to choose
“Date Mode” on the
“Date Setup” menu
screen, and then press
the A button.
Da t e Se t u p
Date Set
Date Mode
ENTER
RETURN
Da t e Se t u p
Date Set
Date Mode
ENTER
M/D/ Y
RETURN
RAM
The menu screen for
setting date will be restored, and the “Date
Mode” has been changed as you designated.
D/M/ Y
M/D/ Y
Y / M/ D
RAM
The options will appear on the right of “Date
Mode”: The Z mark will be attached to the
currently selected option.
4 Press the MENU button to switch off the
menu screen.
Note:
If the date display format has been changed, the display
format during playback as well as during recording will
also be changed (see page 55).
41
English
CHANGING DISPLAY FORMAT OF DATE AND TIME
English
Setting Up the Battery
The DZ-BP14S battery provided with DZ-GX20E or DZ-BP7S battery provided with DZ-MV780E, DZMV750E and DZ-MV730E has not been charged at purchase time: Charge it before using the DVD
video camera/recorder.
Note:
• Be sure to use the DZ-BP14S, DZ-BP7S, DZ-BP14SW (optional) or DZ-BP7SW (optional, unavailable for DZGX20E) battery for the DVD video camera/recorder: Using other batteries could cause the DVD video camera/
recorder to malfunction, or result in fire.
• Be sure to use the DZ-ACS2 (E) AC adapter/charger to charge the battery: Using other chargers could cause
electric shock or fire.
• Charge the battery at temperatures of 10 – 30ºC.
• If the CHARGE indicator does not light when the AC adapter/charger is plugged into AC outlet, unplug it from the
AC outlet, wait a few moments, and then plug it into the AC outlet again. If the CHARGE indicator still does not
light, the AC adapter/charger may be faulty. Unplug it from the AC outlet and consult your dealer.
• The AC adapter/charger can be used around the world. An AC plug adapter is required in some foreign countries.
If you need one, purchase it from your local electronics distributor.
CHARGING BATTERY
Use the provided AC adapter/charger to charge
the battery.
1 Connect the mains lead to AC adapter/
charger.
3 Attach the battery to AC adapter/charger.
Note:
When charging a battery, unplug the DC power cord
from the DC output jack on AC adapter/charger.
2 Plug the mains lead into AC outlet.
Battery
Mains lead
CHARGE indicator
AC adapter/charger
DC output terminal
42
To AC outlet
* The shape of plug
varies depending
on the model.
You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/
charger:
Charge status
CHARGE indicator
During charge
Lit
Charge complete
Goes out
Note:
See “Troubleshooting” on page 164 when the CHARGE indicator blinks.
●Reference for time required to charge battery (at approx. 25ºC):
DZ-BP14S (provided with DZ-GX20E)/DZ-BP14SW (optional): Approx. 165 minutes
DZ-BP7S (provided with DZ-MV780E/DZ-MV750E/DZ-MV730E)/DZ-BP7SW (optional,
unavailable for DZ-GX20E): Approx. 90 minutes
The charge time will vary depending on the remaining power level of battery.
ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER
1 Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it downward until a click is heard.
Terminal
side must be
down.
Note:
• Make sure that the battery is in the correct orientation.
• Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall,
resulting in damage.
REMOVING BATTERY
After using the DVD video camera/recorder, remove the battery from it.
1 While holding down the BATTERY EJECT
button, slide the battery upward to remove it.
Note:
• For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.
• Be careful not to drop the removed battery.
• If the battery remains attached, minute level current
will flow even if the DVD video camera/recorder is off,
and the battery will discharge.
43
English
●Battery charged status
English
●Continuously recordable time with fully charged battery (with no zoom
operation, etc.)
See the following table as a reference for how long the DVD video camera/recorder can continuously be
used with a fully charged battery:
With DZ-BP14S (provided with DZ-GX20E)/DZ-BP14SW (optional)
Video mode
XTRA*
When using viewfinder
DZ-GX20E
DZ-MV780E
DZ-MV750E/
DZ-MV730E
approx. 125 min
approx. 145 min
approx. 170 min
When using LCD monitor
approx. 110 min
approx. 125 min
approx. 145 min
When using viewfinder
approx. 125 min
approx. 145 min
approx. 170 min
FINE
When using LCD monitor
approx. 110 min
approx. 125 min
approx. 145 min
When using viewfinder
approx. 140 min
approx. 170 min
approx. 210 min
When using LCD monitor
approx. 125 min
approx. 145 min
approx. 170 min
STD
With DZ-BP7S (provided with DZ-MV780E/DZ-MV750E/DZ-MV730E)/DZ-BP7SW** (optional)
Video mode
XTRA*
DZ-MV780E
DZ-MV750E/DZ-MV730E
When using viewfinder
approx. 70 min
approx. 85 min
When using LCD monitor
approx. 60 min
approx. 70 min
When using viewfinder
approx. 70 min
approx. 85 min
FINE
When using LCD monitor
approx. 60 min
approx. 70 min
When using viewfinder
approx. 80 min
approx. 100 min
When using LCD monitor
approx. 70 min
approx. 85 min
STD
* The time is only for reference: It will vary depending on recording contents.
**Unavailable for DZ-GX20E.
The reference for how long the DVD video camera/recorder can actually be used
will be approx. 1/2 to 1/3 of the above time:
The continuously recordable time of DVD video camera/recorder in the above table shows the time
available when the DVD video camera/recorder is in the recording mode without using any other
function after recording is started. In actual recording, the battery will discharge 2 – 3 times faster
than this reference, since the REC button and zoom are being operated, and playback is performed.
Assume that the actually recordable time with a fully charged battery is between 1/2 and 1/3 of the
above time, and prepare enough batteries to allow for the time you are planning to record on the
DVD video camera/recorder.
The continuously recordable time may be less depending on the conditions when the DVD video
camera/recorder is used (if recording and recording pause are repeated at short intervals, etc.).
Note that the battery discharges faster in cold places.
Note:
• See page 164 when charging is not possible.
• The charge time will vary depending on the battery remaining level.
• During and after charging, and when the DVD video camera/recorder is being used, the battery will be warm, but
this does not indicate a fault.
• A battery cannot be charged while the DC power cord is connected to the DC output jack of AC adapter/charger:
Unplug the DC power cord when charging a battery.
• Charge the battery at ambient temperature 10ºC to 30ºC: Charging at temperatures other than this range could
damage the battery.
44
English
BATTERY REMAINING LEVEL INDICATOR
When the battery is used to power the DVD video camera/recorder, the battery remaining level
appears in the viewfinder or on the LCD screen as follows:
Fully charged
Nearly empty
White portion shows remaining level
(Blinks)
EFFICIENT USE OF BATTERY
Charge battery immediately before using
DVD video camera/recorder:
The battery will slightly discharge even if it is
detached from the DVD video camera/recorder.
If the battery is left attached to DVD video
camera/recorder, it will consume a slight
amount of power.
Therefore, it is recommended that you charge
the battery shortly before using the DVD video
camera/recorder, usually on the day before you
plan to use it.
However, since the battery used for this DVD
video camera/recorder is free from the memory
effect, you do not need to completely discharge
the battery before charging it.
When not using the DVD video camera/
recorder for an extended period:
It is recommended that you fully charge the
battery once a year, attach it to DVD video
camera/recorder and use it up; then remove the
battery and store it in a cool place again.
Battery life:
The battery life varies greatly depending on the
ambient environment and how often the DVD
video camera/recorder is used. If the usable
time of DVD video camera/recorder with a fully
charged battery is noticeably short, the battery is
probably dead: Purchase a new one.
Power save and discharge of battery:
It is recommended that you turn the DVD video
camera/recorder off in status other than
recording, since even during recording pause
battery power is consumed at the same level as
during recording.
If, when you specify Power Save On, the
recording pause status continues for
approximately 5 minutes, the DVD video
camera/recorder will automatically turn off.
To set or release power save, see “TURNING
DVD VIDEO CAMERA/RECORDER OFF
AUTOMATICALLY (POWER SAVE)” on
page 97.
Store in cool, dark place:
When you are not using the DVD video camera/
recorder, remove the battery and store it in a
cool, dark place. If you store it in a place where
the temperature is high, the battery life will be
shortened. Be especially sure not to store the
battery in an environment (in a closed vehicle)
over 60ºC: Neglecting this could damage the
battery. Also, do not store the battery in a place
which is too cold, such as in a refrigerator:
Doing so could cause condensation when using
the DVD video camera/recorder with the
battery.
45
English
USING DVD VIDEO CAMERA/RECORDER WITH AC ADAPTER/CHARGER
It is recommended that you use the AC adapter/charger to power the DVD video camera/recorder
from household AC outlet when you perform settings on it, play back or edit images, or use it
indoors.
Note:
Be sure to use the specified AC adapter/charger (DZ-ACS2 (E)) to power the DVD video camera/recorder. Using
other AC adapter/chargers could cause electric shock or result in fire.
Mains lead
1
2
4
To AC outlet
3
AC adapter/charger
DC power cord
1 Connect the mains lead to AC adapter/
charger.
2 Plug the mains lead into AC outlet.
3 Plug one end of DC power cord into the DC
output jack on AC adapter/charger.
4 Attach the other end of DC power cord to the
battery attachment platform on DVD video
camera/recorder.
46
* The shape of plug
varies depending
on the model.
While holding down the grey button at the right
of power switch, set the switch according to
each recording function:
Set to “OFF”:
The DVD video camera/
recorder will turn off.
Set to “P”:
To record still on SD
memory card
Set to “O”:
To record movie on DVDRAM or DVD-R disc
Set to “N”:
To record still on DVDRAM disc
English
Turning DVD Video Camera/Recorder On and
Off
Note:
• Once you turn the DVD video camera/recorder on to
let it recognise the disc, you can immediately record
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognise the disc again (see
page 155).
• It will take some time for the DVD video camera/
recorder to display the Disc Navigation screen after
power is turned on.
• If you turn the DVD video camera/recorder on, the
ACCESS indicator will light or blink to show that the
DVD video camera/recorder is recognising the disc or
card: During this time, no operation, such as
recording, can be performed.
After several seconds, the ACCESS indicator will go
out, and operating the DVD video camera/recorder
will be possible.
If the ACCESS indicator does not go out, refer to
“Check 4” on page 155.
Power ON status
During playback, set the power switch to “O”
or “N” when using disc, or set it to “P” when
using card.
Turn the switch while holding down the grey
button at the right of switch.
ACCESS/PC
indicator
• When the DVD video camera/recorder is turned on,
the self-diagnosis function will work and a message
may appear. In this case, refer to “Trouble Messages”
on page 157 and take corrective action.
• While the ACCESS/PC or CARD ACCESS indicator is
lit or blinking, do not violently open or close the LCD
monitor.
OFF
OFF
Power switch
47
English
Inserting and Removing Disc
INSERTING DISC
1 Press down the DISC EJECT button once and
release it.
A few moments after the ACCESS/PC
indicator blinks, the cover of disc insertion
block will open.
2 Gently open the cover by hand fully until it
stops.
3 Push the disc against the turntable at the
centre to lock it until a click is heard.
4 Push the section marked “PUSH CLOSE” on
the cover of disc insertion block, to close the
cover.
Then the DVD video camera/recorder will
automatically recognise the disc: While the
ACCESS/PC indicator is lit, do not cut off the
power supply, and do not subject the DVD
video camera/recorder to any vibrations or
impact.
●Identifying recording sides of
disc:
Single sided disc:
“SIDE A” mark
The recording side is
opposite to the printed label.
Double-sided disc:
The recording side of “SIDE
A” is opposite to the “SIDE
A” marked side.
The recording side of “SIDE
B” is the “SIDE A” marked
The opposite side is
side.
DDV
Turntable
Push the shaded
portion.
• Note that the recording surface of disc must face
the inside of DVD video camera/recorder.
• Never touch the disc recording surface or pickup
lens.
Pickup lens
• Use the disc cleaning cloth provided to wipe off
any dirt adhering to the disc recording surface.
• Do not use a dirtied or scratched disc.
• The recording side must face the inside (DVD
video camera/recorder).
48
RAM / SIDE
A
the “SIDE A”
recording side.
●When using brand-new DVD-R disc
Recognition of the disc
will start.
The messages on the right
will appear in sequence by
pressing the A button
between messages.
F o rma t D i s c
Disc is not formatted.
If it formats, it becomes
possible to use for camera.
NEXT
CANCEL
When recording on this DVD video
camera/recorder:
When final message
F o rma t D i s c
“Format the disc now?”
Howe ve r , when you r e c o r d
appears, choose “YES”
f r om PC connec t i on
terminal,
and then press the A
p l e a s e d o n o t f o rmat.
button. The disc will be
NEXT
CANCEL
formatted.
When formatting is
Not displayed on DZMV730E.
complete, “DVD-R disc,
Video mode and 16:9
mode cannot be changed”
will appear (see page 160):
Press the A button to
F o rma t D i s c
erase the message.
Format the disc now?
Once formatted, a DVD-R
disc can no longer be
YES
NO
changed to a disc for PC,
ENTER
even if it has not been
recorded on this DVD
video camera/recorder.
Note:
See page 90 for video mode.
See page 91 for 16:9 mode.
When recording data from PC (for DZGX20E, DZ-MV780E or DZ-MV750E
only):
While the above messages are being displayed,
press the C button, or when message “Format
the disc now?” appears, choose “NO” and then
press the A button.
However, if data from PC has not yet been
recorded, the disc can be made usable on this
DVD video camera/recorder. When inserting
the disc into this DVD video camera/recorder,
the same message will appear: If you wish to use
it on this DVD video camera/recorder, choose
“YES”.
Note:
Do not initialise a disc on which you wish to record data
created using the application (DVDfunSTUDIO) of PC.
49
English
Note:
• If the cover of disc insertion block is open, the
ACCESS/PC indicator will blink when an image is
displayed on the LCD monitor screen: In this case,
the DVD video camera/recorder will not turn off even if
the power switch is set to “OFF”.
If the cover remains open after a while, the DVD video
camera/recorder will automatically turn off.
• Disc cannot be inserted or removed unless a charged
battery or AC adapter/charger is connected to the
DVD video camera/recorder.
• If a discharged battery is used, the disc cannot be
inserted or removed: Connect a charged battery or
AC adapter/charger to the DVD video camera/
recorder.
• If there is some delay before recording starts, refer to
“Check 4” on page 155.
• If the disc is not correctly attached to the turntable, it
will be difficult to close the cover: If this happens, do
not forcibly close the cover (this could cause a fault),
but re-attach the disc to the turntable correctly.
• If a single-sided disc is inserted into DVD video
camera/recorder with the printed label facing the
inside, an error message will appear. Remove the
disc and reinsert it with its recording side facing the
inside. See “Trouble Messages” on page 157.
• When using double-sided disc
Recording is possible on both sides of double-sided
disc. However, when recording or playback on one
side is finished, recording or playback will not move
automatically to the other side. Remove the disc once
from the DVD video camera/recorder, turn over the
disc and insert it again for continued use.
The recording surfaces of double-sided disc are likely
to become dirtied or scratched: Always make sure
that there is no dirt or scratch on the recording
surface facing the pickup lens, and then use the disc
taking great care that it is not dirtied or scratched.
Use the provided disc cleaning cloth to wipe off any
dirt on disc (see page 29).
English
REMOVING DISC
1 Press down the DISC
EJECT button once and
release it.
In a moment, the cover
of disc insertion block
will open.
DISC EJECT
If the DVD video
camera/recorder is on
at this time, the
“EJECT” indicator will blink on the LCD
monitor or in the viewfinder.
2 Gently open the cover
fully until it stops.
3 Remove the disc.
While pushing down the centre portion of
turntable, pick up the disc, holding its edge,
to remove it.
Turntable
4 Gently push the section
indicated “PUSH CLOSE”
on the cover of disc
insertion block, to close the
cover.
50
Note:
• Do not remove the battery or disconnect the AC
adapter/charger during removal of the disc or until
power is completely turned off: If you do, the disc
cover will not open. If this happens, reattach the
battery or AC adapter/charger, push down the DISC
EJECT button once, and then release it.
• Do not insert anything other than the 8 cm DVD-RAM
or DVD-R disc into the disc insertion block: Doing so
could cause malfunctions.
• When inserting or removing the disc, BE SURE NOT
to look into the lens in laser pickup: Doing so could
damage your eyesight.
1 Open the LCD monitor.
2 Turn the DVD video camera/recorder off.
3 Open the cover of
card insertion
block.
English
Inserting and Removing Card
Removing Card:
Push the centre of
card edge.
The card will come
out so that it can
be held by fingers.
4 Inserting Card:
Insert card with its
terminal inward
until it locks.
5 Close the cover of
card insertion
block.
Note:
• No card is provided with this DVD video camera/
recorder: Buy cards if you need them.
• See page 32 for the capacity of cards and the number
of recordable photos on them.
51
English
Basic Techniques
This section explains about recording of movies and still images, and also basic settings on
DVD video camera/recorder.
12
Recording Movie
Before You Begin
Pressing REC
once will start
recording;
pressing it once
again will
temporarily stop
recording.
• Insert a recordable DVD-RAM or DVD-R disc into this DVD video camera/
recorder.
4 Press the REC button.
ACCESS/PC
indicator
OFF
1 Remove the lens cap, and then point the DVD
video camera/recorder at subject.
2 Turn the DVD camera/recorder on.
The “m” mark in the
viewfinder or on the LCD
screen will change to the
“n” mark, and recording
will start.
During recording, the
recording indicator on the
front of DVD video camera/
recorder will light.
Pressing REC again during
recording will set the DVD
video camera/recorder to
the recording pause status.
5 When recording is finished, turn the DVD
video camera/recorder off.
Set the power switch to “O” to turn the DVD
video camera/recorder on.
After the ACCESS/PC indicator goes out,
perform the subsequent operation:
3 Check the subject on the screen (viewfinder
or LCD).
When using the viewfinder, close the LCD
monitor before pulling out the viewfinder.
52
Recording
indicator
English
Note:
• See “Check 1” on page 155 when recording movie is
not possible.
• See “Check 4” on page 155 if it takes some time
before recording is possible.
• See “Check 5” on page 156 if the DVD video camera/
recorder does not operate.
• See page 55 for on-screen information display.
• It is recommended that you use DVD-RAM disc from
which recorded contents can be deleted.
• Sound is recorded from the stereo microphone on the
front of DVD video camera/recorder: Take care that
this microphone is not blocked.
• You can press the REC button immediately after the
DVD video camera/recorder enters the recording
pause status, but no further recording can be made
while “DISC ACCESS” is being displayed.
Recording will restart after the message disappears.
• Do not turn power off while message “DISC ACCESS”
is being displayed.
• Take care that power is not interrupted while the
ACCESS/PC indicator is blinking.
• The minimum recordable time of movie is
approximately 3 seconds.
• See page 98 for setting of Record LED (recording
indicator) On/Off.
• For various functions available during recording, see
“Setting Up Camera Functions” on page 85.
• Hitachi cannot be responsible for video and audio that
cannot be recorded or edited because of any defect.
• The power switch can be changed over even during
recording, but the operation will not be changed.
• Each time the DVD video camera/recorder enters the
recording pause status, the counter display will be
reset to “0:00:00”.
• It is recommended that you set the LOCK switch to L
(the upper position) to prevent the power switch in the
“O” position from accidentally moving to “N” position.
• Do not insert a non-finalised DVD-R disc into another
DVD device: Doing so could cause the disc to
become unusable (except in the case of the devices
that have a function that can play back a disc that has
not been finalised on this DVD video camera/
recorder).
• When using an unformatted DVD-R disc, it is
necessary to format it on this DVD video camera/
recorder (see page 49).
53
13
English
Recording Stills
Note:
Recording of still images is possible on DVD-RAM disc
and card.
ACCESS/PC
indicator
PHOTO button
CARD ACCESS indicator
1 Remove the lens cap, and then point the DVD
video camera/recorder at subject.
2 Turn the DVD camera/recorder on.
When using DVD-RAM disc:
Set the power switch to “N”.
When using card:
Set the power switch to “P”.
After the ACCESS indicator goes out,
perform the subsequent operation:
3 Check the subject on the screen (viewfinder
or LCD).
When using the viewfinder, pull it out and
close the LCD monitor.
4 Press the PHOTO button half way (half
pressing).
The DVD video camera/recorder will
automatically focus on the subject at the
centre of screen, and the “m” indicator on
screen will light in purple (the focus will not
change when manual focus is chosen).
54
5 Press the PHOTO button all the way (full
pressing).
The screen will be black, and then the
recorded still will be displayed. When the
“m” mark appears, you can proceed with
the next recording; while “DISC ACCESS” or
“CARD ACCESS” is being displayed, you
cannot proceed with the next recording.
Note:
• If you wish to record without locating a subject at the
centre of screen, first locate the subject at the centre
of screen, press the PHOTO button halfway down,
determine the composition to be recorded, and then
press the PHOTO button all the way down.
• If you press the PHOTO button all the way down at
one stroke without pressing it half way, recording will
be possible, but the focus may be incorrect.
• See “SIZE AND QUALITY OF PHOTOS” on page 33
for details of photos on card.
• See “Check 2” on page 155 if recording photos is not
possible.
• Shake of the DVD video camera/recorder may cause
blur in recorded image.
• When holding the DVD video camera/recorder for
recording, grasp it securely with both hands.
• When recording with higher zoom magnification, it is
recommended that you secure the DVD video
camera/recorder on a tripod.
• Do not operate the power switch or remove the card
while the ACCESS/PC or CARD ACCESS indicator is
lit or blinking: Doing so may damage the card or the
data on card.
• The range of screen in which recording is possible will
be different for movie and still.
• If focusing is difficult with auto focus, choose manual
focus, and manually correct the focus before
recording (see page 74).
• There may be a difference between the image you
see on the LCD screen or viewfinder and the
recorded image.
English
123
On-Screen Information
Various types of information will appear in the viewfinder or on the LCD screen during recording.
DISPLAY
INFORMATION DISPLAY DURING RECORDING
See the next page for details.
e
j
n
o
m
p 7. Microphone filter
l 8. 16:9 mode
9. Video flash*
10. Self-timer
2. Programme AE
3. White balance
4. EIS
5. Manual Focus
6. Backlight compensation
11. Recording status
1. Recording mode
10
12. Zoom
13. Exposure correction
REC
0:00:00
REM 3 0 MIN
DISC ACCESS
Warning message
14. Disc/Card type
FINE
30/
8 :00
9 / 2 00 5
Movie recording time
16. Remaining space
on disc/card
17. Remaining
battery level
18. Volume
Current date/time
15. Movie recording quality
The above screen is an example for explanation:
It is different from the actual display.
*Not displayed on DZ-MV750E or DZ-MV730E.
55
1. Recording mode (p. 52, 54)
English
A
B
E
: Movie
: Still (Disc)
: Still (Card)
2. Programme AE (only in movie recording
mode) (p. 85)
No display : Auto
: Sports
b
: Portrait
c
: Spotlight
d
: Sand & Snow
e
: Low Light
f
3. White balance (p. 87)
No display : Auto
: Set
h
: Outdoor
i
: Indoor
j
4. Electronic image stabiliser (EIS)*1 (p. 89)
No display : EIS OFF
: EIS ON
n
8. 16:9 mode (only in movie recording mode)
(p. 91)
No display : 16:9 mode OFF
l
: 16:9 mode ON
9. Video flash*2 [when Video Flash (sold
separately) is attached] (only in still recording
mode) (p. 78)
No display : Emits light automatically
: Always emits light
(
)
: No light emission
10. Self-timer (only in still recording mode) (p. 93)
No display : Self-timer OFF
: Self-timer ON
q
(countdown is from 10 seconds)
11. Recording status
n
m
: During recording
: During recording pause (lights in
green)
When focus locks during photo
recording (lights in purple)
No display*3
5. Manual focus (p. 74)
12. Zoom (p. 59)
No display : Autofocus
: (display in English or German):
o
Manual focus
r
: (display in French or Italian):
Manual focus
v
: (display in Spanish): Manual
focus
6. Backlight compensation (p. 76)
No display : Backlight compensation OFF
: Backlight compensation ON
m
7. Microphone filter (only in movie recording
mode) (p. 89)
No display : Microphone filter OFF
: Microphone filter ON
p
56
W
(Digital Zoom: Off)
X
(Digital Zoom: 40×)
Y
(Digital Zoom: 240× only in movie
recording mode)
13. Exposure correction
No display
: Auto
: Manual
I
K
J
M
N
O
P
DVD-RAM
DVD-R
DVD-RAM (write-protected)
DVD-R disc already finalised on
this DVD video camera/recorder
: DVD-R disc finalised on a device
other than this DVD video
camera/recorder
: SD memory card
: Locked SD memory card
16. Remaining space on disc/card*5
REM XX
MIN*6
REM XX*7
:
:
:
:
No display*4
17. Remaining battery level (p. 45)
w (full charge)
x
y
z (low remaining charge)
18. Volume (p. 61)
15. Movie recording quality (when using disc)
(p. 90)
XTRA
FINE
STD
: Remaining recordable minutes
during movie recording
: Number of remaining recordable
still images during still recording
: Best quality
: High quality
: Standard quality
:
The volume can be adjusted during
playback.
Still recording quality (when using card)
(p. 93)
FINE
NORM
ECO
: High quality
: Standard quality
: Number of recordable stills is
prioritised
*1 EIS cannot be used when recording photos on DZ-GX20E or DZ-MV780E.
*2 Not displayed on DZ-MV750E or DZ-MV730E.
*3 When no disc or card is in the DVD video camera/recorder, or disc has not yet been initialised, a write-protected
disc or locked card, or a disc or card with no remaining space, has been inserted.
*4 When a disc or card that cannot be used in this DVD video camera/recorder is inserted.
*5 No remaining time or number will be displayed with a protected disc or locked card, or finalised DVD-R disc.
*6 In XTRA mode, possible recording time may be longer than the displayed time.
*7 The displayed number of recordable stills is for reference: This number may not decrease, depending on the
recording conditions (not displayed with a DVD-R disc).
●Switching the information display mode
You can switch the display mode of on-screen information:
Press the DISPLAY button.
The full and minimum display modes will alternate.
• Full display mode: All types of information will
DISPLAY
appear.
• Minimum display mode: The recording mode (see
1 on page 55) and recording status (see 11 on
page 55) will appear. If the DVD video camera/recorder has warning information, a warning
message will appear.
Note:
The DVD video camera/recorder does not record the date and time as a part of image. However, this information
during recording will be recorded with image as data which can be checked on Disc Navigation screen during
playback (see “INFORMATION DISPLAY DURING PLAYBACK” on page 65).
57
English
14. Disc/Card type
English
●Display when recording an image of yourself
When recording with the LCD screen facing the same direction as the
lens, the operating status will appear: The battery remaining level will
appear only when the remaining level is very low, and the display will
blink.
The following operating status indicator will light or blink to give
warning message to user. The message can be checked when returning
the LCD monitor 180º to the original status from the status in which the
LCD screen was facing the same direction as the lens.
No warning/message (see page 55) will appear when recording with the LCD screen facing the same
direction as the lens.
Instead, the following screen display symbols will blink to inform you of the operation status of
DVD video camera/recorder.
When the LCD monitor is turned 180º from the position with the LCD screen facing the same
direction as the lens, the warning/message can be checked.
●Interpreting symbols on LCD screen when recording with the screen
facing the same direction as the lens:
Screen
display
symbol
Q
Description
Operating status/
warning message
• A write-protected disc is loaded.
• A locked card is loaded.
• An unusable card is loaded.
N
• An attempt to record a still is being made with a DVD-R disc
used.
• An unusable disc is loaded.
k
• During recording (lights in red).
• The remaining capacity on disc is approaching the limit 0 (blinks
in red).
l
• During recording pause (lights in green).
• During focus lock (lights in purple).
• The remaining capacity on disc or card is approaching the limit 0
(blinks in red).
• There is no remaining capacity on disc or card (blinks in green).
Battery remaining
level
Note:
• If the LCD screen is set facing the same direction as the lens, the LCD screen will display a mirror image (left and
right reversed).
• If the LCD screen is set facing the same direction as the lens, you can also view subject image in the viewfinder.
• Although you can switch to the manual focus, exposure and on-screen display modes even during recording with
LCD screen facing the same direction as lens, they will not appear on the screen.
• When the LCD monitor is opened and turned 180º with the Programme AE set to Low Light, the monitor screen
will light white (see page 86).
58
English
123
Zooming
If you continue to hold the zoom lever on the
“T” control side with Dig. Zoom 40× or 240×
specified, the digital zoom will be activated
midway (when optical 10-power is exceeded on
DZ-GX20E or DZ-MV780E, or optical 16-power
is exceeded on DZ-MV750E or DZ-MV730E).
You can zoom up to 240-power.
3 Press the MENU button to end the setting.
Moving the zoom lever will display the
digital zoom bar.
0:00:00
REM 3 0 MIN
W: recording wide area
(wide-angle)
8:00
3 0 / 9 / 2 00 5
FINE
When Dig. Zoom is “Off”
W
T
When Dig. Zoom is “On” (40x)
W
T
Digital zoom range
T: recording enlarged
image (telephoto)
When Dig. Zoom is “On” (240x)
(only in movie recording)
T
W
1 Press the MENU
button, choose “Dig.
Zoom” on the “Camera
Functions Setup” menu
screen, and then press
the A button.
Digital zoom range
Came r a F u nc t i on s Se t u p
P r o g r am AE
Wh i t e Ba l .
EIS
D i g . Zo om
240x
40x
M IC . F i l t e r
Of f
RAM
ENTER RETURN
2 Choose the desired magnification, and then
press the A button.
Note:
• The digital zoom setting will be stored in memory
even if the DVD video camera/recorder is turned off.
• You can also use the DIGITAL ZOOM button on
remote control to switch the digital zoom setting:
Pressing the button during movie recording will switch
the setting between “Off”, “40×”, and “240×”: Pressing
the button during photo recording will switch between
“Off” and “40×”.
• If you set zoom to “240×” when recording photo, the
digital zoom will be up to 40×.
• When a subject is zoomed, it may be momentarily out
of focus.
• When digital zoom is engaged, the image quality will
be rougher.
59
English
MACRO RECORDING
Use the macro function when recording a small object from close-up position: You can shoot the
subject as close as approximately 2 cm from the lens surface, magnifying the image to fill the screen.
1 Aim the DVD video camera/recorder at the
subject, and press the zoom lever to “W”
control side.
Note:
• Zoom can be used, but the subject may not be
focused, depending on the distance to the subject. In
this case, move the zoom to “W” control side to focus.
• The amount of light tends to be insufficient during
macro recording: If the subject image is too dark, use
additional lighting.
RECORDING SUBJECTS FOR STRONGER WIDE-ANGLE OR TELEPHOTO
EFFECT
Use the tele-conversion lens or wide-conversion lens with the following filter diameter and thread
pitch to record subjects for stronger telephoto or wide-angle effect:
Filter diameter: 34 mm for DZ-GX20E, DZ-MV750E or DZ-MV730E; 30.5 mm for DZ-MV780E
Thread pitch: 0.5 mm
When attaching the optional DZ-TL1 tele-conversion lens or DZ-WL1 wide-conversion lens, use the
optional step-up ring: DZ-SR3437 for DZ-GX20E, DZ-MV750E or DZ-MV730E, DZ-SR3037 for DZMV780E (see page 148).
1 Remove the lens hood from DVD video
camera/recorder, and attach the step-up ring
over the lens.
Lens hood
2 Remove the cap of conversion lens, and screw
the lens into the thread of step-up ring.
Conversion lens
Step-up ring
(Remove)
• Tele-conversion lens: For stronger telephoto effect
• Wide-conversion lens: For stronger wide-angle effect
Note:
• Be careful not to lose the removed lens hood.
• With DZ-TL1 tele-conversion lens, the focusing range
at “T” (telephoto) control side is between approx. 5 m
and infinite.
• When a conversion lens is attached, note that the four
corners of screen will be slightly dim if you zoom in on
a subject on the W control side (wide-angle side).
• When replacing the lens, take care not to drop the
DVD video camera/recorder.
• Attaching the conversion lens will disable the function
of the built-in flash (for DZ-GX20E only): Specify
“Flash: Off” (see page 78).
• If a generally available filter is attached, do not attach
the removed lens hood.
60
(Attach)
Before You Begin
English
Playing Back
• Insert a disc or card recorded on this DVD video camera/recorder (p. 52,
54).
• Turn the DVD video camera/recorder on (p. 47).
123
PLAYING BACK
Playing Back
STOP/EXIT
Use f / e / d / c to select,
and then press A to designate.
1 Press the A button in the recording pause
status.
The DVD video camera/recorder will enter
the playback mode, and the scene you have
recorded last will be played back. (For
“scene”, see p. 100 and “Terminology”,
p. 152.)
When playback is finished, the DVD video
camera/recorder will enter the pause status
at the last image on disc.
If the playback pause status continues for as
long as 5 minutes, the DVD video camera/
recorder will automatically return to the
recording pause status.
Note:
• If the LCD monitor is open during playback of movie,
playback sound will be heard from the speaker. Adjust
the sound volume using the volume control buttons
(S, R).
• To temporarily stop playback, press the A button.
Press the A button again to restart playback.
• Even if you stop playback midway and immediately
start recording again, the new image will be recorded
after the last scene on disc or card (the previous
images will not be overwritten).
• Image data edited on PC, etc., or the recorded image
may not appear on this DVD video camera/recorder;
also, the recorded sound may not play back,
depending on the type of image data.
• Image data recorded on another DVD video camera/
recorder or DVD recorder may not be played on this
DVD video camera/recorder.
• Depending on the amount of data to be played back,
it may take some time for the playback image to
appear.
• Do not operate the power switch or remove the card
while the ACCESS/PC or CARD ACCESS indicator is
lit or blinking: Doing so may damage the card or the
data on card.
2 Press the C button.
Playback will stop, and recording pause
status will be restored.
61
123
English
PLAYBACK FROM START OF DISC OR CARD
Use the Go To function (p. 64) or Disc
Navigation function (p. 100) to play back from
the start of disc or card.
12
SEARCH PLAYBACK OF MOVIE
During playback, press the d or c button and
hold it: Search playback will start.
Hold down c :
Scenes will be visually scanned forward.
Hold down d :
Scenes will be visually scanned backward.
Release the d or c button when you find the
desired image:
Normal playback will start from that point.
Note:
• See page 155 if search playback does not operate
normally.
12
FRAME ADVANCE/FRAME BACK/SLOW PLAYBACK OF MOVIE
During playback pause, press the d or c
button: Frame advance, frame back or slow
playback will start.
After frame advance, frame back or slow
playback, the DVD video camera/recorder will
enter the playback pause status.
Press c once:
Picture will advance one frame.
Press d once:
Picture will go back one frame.
Hold down c :
Forward slow playback.
Hold down d :
Reverse slow playback.
Note:
• In slow playback, a rapidly moving subject image may
be distorted.
• The intervals for playing back frames in frame
advance/frame back/slow playback are as follows:
Frame advance and forward slow: Approx. 0.03
second
Frame back and reverse slow: Approx. 0.5 second
• No sound will be heard during search playback or
slow playback.
62
English
12
SKIP PLAYBACK OF MOVIE
During playback, press the f or e button to
locate the start of desired scene.
Press e once:
To skip to the first image of the scene
following the one being played back, and start
playback.
Press f once:
To return to the first image of the scene being
played back, and start playback.
Hold down e :
To continuously locate the beginnings of
scenes, starting from the scene following the
scene being played back. When the desired
image appears, release the button: Playback
will start from that point.
Hold down f :
To continuously locate the beginnings of
scenes backward, starting from the scene
preceding the scene currently being played
back. When the desired image appears, release
the button: Playback will start from that point.
Portion being played back
Press f
twice
Scene 1
Press f Press e
once once
Scene 2
Press e
twice
Scene 3
Portion being played back
Press f
once
Press e
once
Press e
twice
Scene 1
Scene 2
Scene 3
Pressing the f button at a portion several seconds
from the start of scene being played back will return
to the start of the scene preceding that being played
back.
Note:
• If you perform skip playback during playback pause,
the DVD video camera/recorder will enter the
playback pause status at the beginning of the located
scene.
• Pressing the e button in the last scene on disc will
set the DVD video camera/recorder to the playback
pause status at the last image.
• See “Check 3” on page 155 if skip playback does not
operate normally.
13
PLAYING BACK STILLS
Press the f or e button during playback to
quickly play back stills in sequence.
Press e once:
To display stills one by one forward.
Press f once:
To display stills one by one backward.
[When using disc]
Releasing the f or e button will start
continuous playback.
[When using card]
When the f or e button is released, the
photo at that point will be displayed, and then
the DVD video camera/recorder will enter the
playback pause status.
Set the slide show function for continuous
display (p. 134).
63
123
English
JUMPING TO SPECIFIED POINT (GO TO)
1 Press the MENU button
during playback.
Go T o
To p
En d
Spec i f y
2 Choose the option
(point you want to go
to), and then press the
A button.
ENTER
RETURN
RAM
Top:
To go to the start, and enter playback pause.
End:
To go to the end of last scene, and enter
playback pause.
Specify:
To go to a specified point and enter playback
pause. See the following for details.
●Specifying the point to view
1 Choose “Specify” in step 2 above, and then
3 Press the A button to enter the selection.
press the A button.
The screen for specifying the point to go to
will appear.
Position of currently
played back image
Total recording time of
all selected scenes
Go t o
Cursor
TOP
CURRENT
END
0 : 00 : 00
0 : 03 : 26
0 : 24 : 24
GO TO 0 : 03 : 26
TOP END ENTER
CANCEL
Cursor position
2 Use the f/e/d/c buttons to select
the desired time of chosen point.
Press f
: To select the start.
Press e
: To select the end.
Press d or c
:
• Press once:
To move the cursor in 10-second units
(1-still units for card)
• Hold down:
To move the cursor in 1-minute units
(10-still units for card)
Go t o
TOP
CURRENT
END
0 : 00 : 00
0 : 03 : 26
0 : 24 : 24
GO TO 0 : 00 : 00
TOP END ENTER
CANCEL
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.
64
The DVD video camera/recorder will go to
the specified point and enter the playback
pause status.
Pressing A again will start playback.
To cancel the “Go To” procedure midway, press
the C button before going to the specified point.
Note:
• If multiple scenes are selected using the Disc
Navigation function or SELECT button, choosing
“Top” will jump to the beginning of selected scenes
(p. 128).
• When multiple scenes are selected, the total time of
selected scenes will appear in the “total recording
time” display.
• With card, the number of stills will appear at the
“TOP”, “CURRENT”, “END” and “GO TO” indicators.
• The cursor may not move at same-pitch intervals.
English
123
On-Screen Information Display
INFORMATION DISPLAY DURING PLAYBACK
Various types of information on recording will be superimposed on playback image you are viewing.
9:27
30/ 9/2005
No display
Playback information
display
●Switching the information display
mode
Press the DISPLAY button: You can switch the
display mode of on-screen information.
When using disc:
*1
*2
*3
*4
*5
Recording mode*1
Repeat play*5
Scene No.
*6
06
006
RAM
0 : 00 : 1 6
Playback
operation*6
Counter
Disc type*4
Programme No. or Play List No.*3
Programme or Play List*2
When using card:
Scene No.
Lock*5
File name
Slide Show*5
003
Recording mode*1
100—0003
Playback operation*6
Recording date/time
O (VIDEO) or N (PHOTO) with disc;
Only E (PHOTO) with card.
678 Programme or 12345 Play List
Number of programme or play list being
played back (not displayed when all
programmes are being played back)
Refer to “Disc/Card type” on page 57.
Y
: Will appear when each function is
specified “On”
F
: Standard playback
b
: Playback pause
c : Forward search playback
d : Reverse search playback
e : Forward skip playback
f : Reverse skip playback
g : Forward frame advance
h : Reverse frame back
Refer to “Playing Back” beginning on page 61
for how to operate.
The “j” mark will appear on the first image
on disc.
The “i” mark will appear on the last image
on disc.
• Recording date/time display: Shows the date/
time when recording was started. Even when
playback starts, the date/time display will not
advance.
• No display: No information will appear.
However, when the mode of playback
operation is switched, the symbol will appear
for approx. 3 seconds.
Note:
See “Using Disc Navigation” on page 100 and later for
explanation on programme and play list.
65
English
Checking Flow of Quick Menu
The following two on-screen menu modes are available with this DVD video camera/recorder:
• Quick Menu: To display only the fundamental menu items for first timers
• Normal Menu: To display all menu items for experts (p. 83)
Camera Functions
While the camera image is being displayed on the LCD monitor, press the QUICK MENU button:
The Quick Menu will appear.
Only the fundamental menu items will appear in the Quick Menu, and the explanation of the
function on which the cursor is positioned will be displayed across the bottom of menu (No
explanation on function will appear in the Normal Menu.).
Use the f/e/d/c buttons to select a menu item, and then press the A button to choose
the option.
See “Operating Menu” shown below for how to set the menu.
No menu appears during recording.
1 Press the QUICK MENU button.
<How to interpret the menu screen>
Qu i c k M e n u
V I DEO M o d e
16 : 9
F I NE
Options settable
Selection of setup items
T : Record Functions Setup
U : Date Setup
W : Initial Setup
S e l e c t t h e m o v i e q u a l i t y.
ENT ER
RE TURN
RAM
Display of disc or card being
used (p. 57)
Guide display
Explanation on function
Functions settable
66
You can use the f/e/d/c buttons on DVD video camera/recorder to select various setting
options in Quick Menu and designate them.
Press the QUICK MENU button.
QUICK
MENU
Qu i c k M e n u
V I DEO Mo d e
16 : 9
Press c or A
: F I NE
: Of f
Me n u f o r r e c o r d f u n c t i o n s
s e t u p.
ENT ER RE TURN
RAM
Press e
Qu i c k M e n u
V I DEO Mo d e
16 : 9
F I NE
S e l e c t t h e mo v i e q u a l i t y.
Press d or C
ENT ER
RE TURN
RAM
Press f
Qu i c k M e n u
Press the A button directly to choose an option from menu.
To return to the screen one before, press the C button.
Pressing the QUICK MENU button again will cause the Quick
Menu display to disappear.
Da t e Se t
Me n u f o r d a t e s e t u p .
ENT ER
RE TURN
RAM
When using the Normal Menu (p. 84) and Disc Navigation Menu (p. 105), use the same procedure to
choose any menu item and determine the option.
Note:
• Pressing the QUICK MENU button during recording will not work.
• The menu screen will disappear when it is left for approx. one minute without any operation.
67
English
●Operating Menu
12
English
FLOW OF QUICK MENU WHEN RECORDING MOVIE:
The following shows the menu when DVD-RAM disc is being used:
The details of each function are described on the pages showing the Normal Menu: See each
reference page.
●Record Functions Setup
(p. 90)
Qu i c k M e n u
V I DEO Mo d e
16 : 9
Qu i c k M e n u
V I DEO Mo d e
16 : 9
: F I NE
: Of f
Me n u f o r r e c o r d f u n c t i o n s
s e t u p.
ENT ER RE TURN
RAM
Qu i c k M e n u
V I DEO Mo d e
16 : 9
F I NE
S e l e c t t h e mo v i e q u a l i t y.
ENT ER
RE TURN
X TRA
F I NE
S TD
F i n e I ma g e Qu a l i t y.
RAM
ENT ER
RE TURN
RAM
(p. 91)
Qu i c k M e n u
V I DEO Mo d e
16 : 9
Qu i c k M e n u
V I DEO Mo d e
16 : 9
Of f
1 6 : 9 mo d e i s s e t .
ENT ER
On
Of f
Re c o r d i n g b y 4 : 3 .
RE TURN
RAM
ENT ER
RE TURN
RAM
●Date Setup
(p. 40)
Qu i c k M e n u
Qu i c k M e n u
Da t e Se t
Da t e Se t
Me n u f o r d a t e s e t u p.
ENT ER
RE TURN
RAM
30 / 9 / 2005
8 : 00
Se t t he c u r r en t da t e and
t i me.
ENT ER RE TURN
RAM
●Initial Setup
(p. 98)
Qu i c k M e n u
Qu i c k M e n u
Language : Eng l i s h
D e mo Mo d e : A u t o
Re s e t
Me n u f o r I n i t i a l s e t u p.
ENT ER
RE TURN
Qu i c k M e n u
Language
Eng l i s h
D e mo Mo d e
Re s e t
C h a n g e t h e l a n g u a g e d i s p l a y.
RAM
ENT ER
RE TURN
RAM
Language
D emo Mo d e
Re s e t
Ch a n g e t h e l a n g u
ENT ER
RE TURN
Eng l i s h
Fr ança i s
Españo l
De u t s c h
I t a l i ano
RAM
(p. 151)
Qu i c k M e n u
Qu i c k M e n u
Language
Au t o
D e mo Mo d e
Re s e t
S e l e c t d e m o n s t r a t i o n mo d e
s e t t i n g.
ENT ER RE TURN
RAM
(p. 99)
Qu i c k M e n u
Language
D e mo Mo d e
Re s e t
Me n u s e t u p i s r e t u r n e d t o
i n i t i a l s t a t e e x c e p t d a t e.
ENT ER RE TURN
RAM
68
Language
Au t o
Of f
D emo Mo d e
Re s e t
Star t
S t a r t d emo n s t r a t i o n a f t e r
a p p r o x. 3 m i n u t e s.
ENT ER RE TURN
RAM
The following shows the menu when DVD-RAM disc is being used:
The details of each function are described on pages showing the Normal Menu: See each reference
page.
●Record Functions Setup
(p. 93)
Qu i c k M e n u
S e l f T i me r
Qu i c k M e n u
S e l f T i me r
: Of f
Me n u f o r r e c o r d f u n c t i o n s
s e t u p.
ENT ER RE TURN
RAM
Qu i c k M e n u
S e l f T i me r
Of f
S e l e c t t h e s e l f t i me r .
ENT ER
RE TURN
RAM
On
Of f
Of f
C a n c e l t h e s e l f t i me r
r e c o r d i n g.
ENT ER RE TURN
RAM
●Date Setup
(p. 40)
Qu i c k M e n u
Qu i c k M e n u
Da t e Se t
Da t e Se t
Me n u f o r d a t e s e t u p.
ENT ER
RE TURN
RAM
30 / 9 / 2005
8 : 00
Se t t he c u r r en t da t e and
t i me.
ENT ER RE TURN
RAM
●Initial Setup
(p. 98)
Qu i c k M e n u
Qu i c k M e n u
Language : Eng l i s h
D e mo Mo d e : A u t o
Re s e t
Me n u f o r I n i t i a l s e t u p.
ENT ER
RE TURN
Qu i c k M e n u
Language
Eng l i s h
D e mo Mo d e
Re s e t
C h a n g e t he l a n g u a g e d i s p l a y.
RAM
ENT ER
RE TURN
RAM
Language
D emo Mo d e
Re s e t
Ch a n g e t h e l a n g u
ENT ER
RE TURN
Eng l i s h
Fr ança i s
Españo l
De u t s c h
I t a l i ano
RAM
(p. 151)
Qu i c k M e n u
Qu i c k M e n u
Language
Au t o
D e mo Mo d e
Re s e t
S e l e c t d e m o n s t r a t i o n mo d e
s e t t i n g.
ENT ER RE TURN
RAM
Language
Au t o
Of f
D emo Mo d e
Re s e t
Star t
S t a r t d e mo n s t r a t i o n a f t e r
a p p r o x. 3 m i n u t e s.
ENT ER RE TURN
RAM
(p. 99)
Qu i c k M e n u
Language
D e mo Mo d e
Re s e t
Me n u s e t u p i s r e t u r n e d t o
i n i t i a l s t a t e e x c e p t d a t e.
ENT ER RE TURN
RAM
Note:
No photo can be recorded on DVD-R disc.
69
English
1
FLOW OF QUICK MENU WHEN RECORDING PHOTO (DISC):
3
English
FLOW OF QUICK MENU WHEN RECORDING PHOTO (CARD):
The details of each function are described on pages showing the Normal Menu: See each reference
page.
●Record Functions Setup
(p. 93)
Qu i c k M e n u
Qu a l i t y
Se l f T i me r
: F I NE
: Of f
Me n u f o r r e c o r d f u n c t i o n s
s e t u p.
ENT ER RE TURN
Qu i c k M e n u
Qu a l i t y
S e l f T i me r
F I NE
S e l e c t t h e p h o t o q u a l i t y.
ENT ER
Qu i c k M e n u
Qu a l i t y
S e l f T i me r
F i n e I ma g e Qu a l i t y.
ENT ER
RE TURN
F I NE
NORM
ECO
RE TURN
(p. 93)
Qu i c k M e n u
Qu a l i t y
S e l f T i me r
Qu i c k M e n u
Qu a l i t y
S e l f T i me r
Of f
On
Of f
Of f
Ca n c e l t h e s e l f t i me r
r e c o r d i n g.
ENT ER RE TURN
S e l e c t t h e s e l f t i me r .
ENT ER
RE TURN
●Date Setup
(p. 40)
Qu i c k M e n u
Da t e Se t
Me n u f o r d a t e s e t u p.
ENT ER
RE TURN
Qu i c k M e n u
Da t e Se t
30 / 9 / 2005
8 : 00
Se t t he c u r r en t da t e and
t i me.
ENT ER RE TURN
●Initial Setup
(p. 98)
Qu i c k M e n u
Language : Eng l i s h
D emo Mo d e : A u t o
Re s e t
Me n u f o r I n i t i a l s e t u p.
ENT ER
RE TURN
Qu i c k M e n u
Qu i c k M e n u
Language
Eng l i s h
D e mo Mo d e
Re s e t
C h a n g e t h e l a n g u a g e d i s p l a y.
ENT ER
RE TURN
Language
D emo Mo d e
Re s e t
Ch a n g e t h e l a n g u
ENT ER
Eng l i s h
Fr ança i s
Españo l
De u t s c h
I t a l i ano
RE TURN
(p. 151)
Qu i c k M e n u
Qu i c k M e n u
Eng l i s h
Language
Au t o
D emo Mo d e
Re s e t
S e l e c t d e m o n s t r a t i o n mo d e
s e t t i n g.
ENT ER RE TURN
(p. 99)
Qu i c k M e n u
Eng l i s h
Language
D e mo Mo d e
Re s e t
Me n u s e t u p i s r e t u r n e d t o
i n i t i a l s t a t e e x c e p t d a t e.
ENT ER RE TURN
70
Eng l i s h
L a n g u a ge
Au t o
Of f
D emo Mo de
Re s e t
Star t
S t a r t d e mo n s t r a t i o n a f t e r
a p p r o x. 3 m i n u t e s.
ENT ER RE TURN
English
Disc Navigation Functions
While Disc Navigation screen is being displayed on the LCD monitor, press the QUICK MENU
button: The Quick Menu will appear.
Only the fundamental menu items will appear in the Quick Menu, and the explanation of the
function on which the cursor is positioned will be displayed across the bottom of menu (except
during recording).
1 Press the DISC NAVIGATION button.
2 Select a scene, and then press the QUICK
MENU button.
1
FLOW OF QUICK MENU (WITH DVD-RAM DISC):
The details of each function are described on pages showing the Normal Menu: See each reference
page.
●Scene
(p. 109)
Qu i c k Me n u
Ed i t
Ef f ec t
ETC
Co p y
Qu i c k Me n u
Ed i t
Ef f ec t
ETC
Co p y
E d i t s c e n e.
Me n u f o r s c e n e.
ENT ER
RE TURN
Qu i c k Me n u
Ed i t
Ef f ec t
ETC
Co p y
Di v i de
De l e t e
RAM
ENT ER
Di v i de
De l e t e
D i v i d e s c e n e.
RE TURN
RAM
ENT ER
RE TURN
RAM
(p. 107)
Qu i c k Me n u
Ed i t
Ef f ec t
ETC
Co p y
Di v i de
De l e t e
D e l e t e s e l e c t e d s c e n e.
ENT ER
RE TURN
RAM
(p. 111)
Qu i c k Me n u
Ed i t
Ef f ec t
ETC
Co p y
Qu i c k Me n u
Ed i t
Ef f ec t
ETC
Co p y
Fade
S c e n e e f f e c t i s s e t u p.
ENT ER
RE TURN
RAM
Fade
Add f ad i ng to t he beg i nn i ng
a n d / o r e n d o f s c e n e.
ENT ER RE TURN
RAM
(p. 114)
Qu i c k Me n u
Ed i t
Ef f ec t
ETC
Co p y
Co p y t h e s e l e c t e d p h o t o
t o c a r d.
ENT ER RE TURN
RAM
71
English
●Disc
(p. 129)
Qu i c k Me n u
Qu i c k Me n u
F o r ma t D i s c
F o r ma t D i s c
ETC
ETC
Me n u f o r d i s c.
ENT ER
RE TURN
D i s c F o r ma t .
RAM
ENT ER
RE TURN
RAM
●Others
(p. 133)
Qu i c k Me n u
ETC
Qu i c k Me n u
Re p e a t P l a y : O f f
ETC
O t h e r s Me n u
ENT ER
RE TURN
RAM
Qu i c k Me n u
Re p e a t P l a y
Of f
Se l e c t t he r epea t p l a y
s e t t i n g.
ENT ER RE TURN
ETC
Re p e a t P l a y
On
Of f
C a n c e l r e p e a t p l a y.
RAM
ENT ER
RE TURN
RAM
2
FLOW OF QUICK MENU (WITH DVD-R DISC):
The details of each function are described on pages showing the Normal Menu: See each reference
page.
●Disc
(p. 132)
Qu i c k Me n u
F i na l i ze Di sc
Qu i c k Me n u
F i na l i ze Di sc
ETC
ETC
Me n u f o r d i s c.
ENT ER
RE TURN
F i n a l i z e DVD - R d i s c.
R
ENT ER
RE TURN
R
●Others
(p. 133)
Qu i c k Me n u
ETC
Qu i c k Me n u
Re p e a t P l a y : O f f
ETC
O t h e r s Me n u
ENT ER
RE TURN
R
Re p e a t P l a y
Qu i c k Me n u
Of f
Se l e c t t he r epea t p l a y
s e t t i n g.
ENT ER RE TURN
ETC
On
Of f
C a n c e l r e p e a t p l a y.
R
Note:
The menu item “Finalize Disc” will not appear with a finalised DVD-R disc.
72
Re p e a t P l a y
ENT ER
RE TURN
R
The details of each function are described on pages showing the Normal Menu: See each reference
page.
(p. 107)
Qu i c k Me n u
De l e t e
Qu i c k Me n u
De l e t e
Me n u f o r s c e n e.
D e l e t e s e l e c t e d p h o t o.
ENT ER
RE TURN
ENT ER
RE TURN
(p. 129)
Qu i c k Me n u
Qu i c k Me n u
F o r ma t Ca r d
Me n u f o r c a r d.
ENT ER
RE TURN
F o r ma t Ca r d
C a r d F o r ma t .
ENT ER
RE TURN
(p. 134)
Qu i c k Me n u
Qu i c k Me n u
Star t
S l i d e s h o w o f a l l s c e n e s.
ENT ER
RE TURN
Star t
S t a r t s l i d e s h o w.
ENT ER
RE TURN
73
English
3
FLOW OF QUICK MENU (WITH CARD):
123
English
Manually Focusing Subject
The DVD video camera/recorder usually focuses on a subject automatically (autofocus). You can also
manually focus a subject depending on the recording conditions.
FOCUSING DURING RECORDING
Normally, the DVD video camera/recorder automatically focuses the subject (autofocus), but you
can also manually focus a subject, depending on the recording conditions (manual focus).
Focusing range
You can switch the display mode of on-screen information:
• On T (tele) side: approximately 1 m from lens surface to infinity
• On W (wide) side: approximately 2 cm from lens surface to infinity
1 Press the FOCUS button during recording.
“MF” will appear on the screen.
Manual Focus icon
VOL.
2 Press the zoom lever to “T” control side to
FOCUS
Adjust with S and R buttons
zoom in on subject.
3 Use the S R buttons to adjust the focus,
while viewing the image in the viewfinder or
on the LCD screen.
74
Note:
• Pressing FOCUS will alternate between manual focus
and auto focus. With auto focus, no indication will
appear on the screen.
• Be sure to zoom in on your subject before manually
focusing on it. If you bring the subject into focus at the
“W” control side, focus will be faulty when you turn the
zoom lever to the “T” control side to zoom in on the
subject.
• Manual focus is released when the DVD video
camera/recorder is turned off. When you turn the DVD
video camera/recorder on next time, auto focus will be
restored.
Objects not in
the centre of
screen
Objects with
little variation
in brightness,
such as white
wall
Objects that
are far and
near at the
same time
Objects
moving rapidly
Objects lit by
neon sign,
spotlight, etc.
which glares
or emits
strong light
Dark objects
Object behind
glass with
water
droplets, dirt
on it
Night view
75
English
Manually focus the following objects, which may not be automatically focused (see page 74):
123
English
Adjusting Brightness of Image to be recorded
(Exposure)
The DVD video camera/recorder usually adjusts the exposure automatically. You can also manually
adjust the exposure depending on the recording conditions.
1 Press the EXPOSURE button during
recording.
VOL.
The exposure adjustment bar will appear on
the screen.
EXPOSURE
Adjust with S and R buttons
Exposure adjustment bar
2 Use the S R buttons to adjust the exposure,
while viewing the image in the viewfinder or
on the LCD screen.
Note:
• Pressing EXPOSURE will alternate between manual
adjustment and auto exposure. With auto exposure,
no indication will appear on the screen.
• The exposure setting will return to Auto when the
DVD video camera/recorder is turned off.
123
Compensating for Backlight
When subject is lighted from rear, this function will compensate for lighting so that the subject is not
too dark.
BLC
1 Press the BLC button during recording.
0:00:00
REM 3 0 MIN
Backlight correction icon
FINE
8 : 00
30/ 9 /2005
The backlight correction icon will appear.
Note:
• Pressing the BLC button will alternate between
backlight setting between on and off.
• The backlight setting will automatically return to “off”
when the DVD video camera/recorder is turned off.
76
English
12
Using External Microphone
Connect external microphone (generally available) to the external microphone jack of this DVD
video camera/recorder. Clearer sound can be recorded. Turn on the switch on external microphone
and start recording. For details on external microphone, see “Major Specifications” on page 171.
To external
microphone jack
Note:
• Depending on the shape of its plug, an external microphone cannot be plugged in, while the cable is left plugged
in the AV/S output terminal. Unplug the AV/S output cable to use the external microphone.
• This DVD video camera/recorder cannot use a plug-in power type microphone. (Power is not supplied from this
DVD video camera/recorder.)
77
13
English
Built-in Video Flash (for DZ-GX20E only)
When recording photos in a dark place, or if the subject is lit from rear, the DZ-GX20E makes use of
the built-in Video Flash for automatic brightening: The Video Flash can also be set to On where the
light is always being emitted, or Off when you wish to record without using the flash even in a dark
place.
Setting
On-screen display
Manner of emitting light
Auto
( when the PHOTO button is
pressed
(
)
On
Off
Always emits light regardless of brightness.
No light emission.
1 Press the MENU button, and choose Flash
from the Camera Functions Setup menu.
2 Choose the option for Flash and decide it.
3 Press the MENU
button to end the
setting.
* Displayed when
using DZ-GX20E
to record photo
(not displayed
when the optional
Video Flash is
connected)
*
Came r a F u nc t i on s Se t u p
P r o g r am AE
Wh i t e Ba l .
D i g . Zo om
F l ash
Au t o
On
Of f
RAM
ENTER RETURN
REM 3 9 4
8 : 00
30/ 9 /2005
●Optional Video Flash (for DZGX20E or DZ-MV780E only)
See “Introduction to Optional Accessories” on
page 148.
You use the optional DZ-FLH3 Video Flash*
(p. 148): Refer to the instruction manual of Video
Flash for use.
* Unavailable for DZ-MV750E or DZ-MV730E.
78
Automatically emits light in dark place or in a spot lit
from rear.
Note:
• The built-in Video Flash setting will not change even
when the DVD video camera/recorder is turned off.
Unless recording is to be made with the fixed Flash
setting, it is recommended to return it to “Auto” after
recording with the “On” or “Off” setting, before turning
the DVD video camera/recorder off.
• When recording dark subjects, the shutter speed will
be slower, so don’t let the camera shake.
• However, dark subjects may not be in clear focus
even if the Video Flash is used. It is recommended
that you light a subject when recording in a dark
place.
• The built-in Video Flash cannot be used when a
conversion lens is attached: Specify “Flash: Off”.
• The Video Flash automatically adjusts the amount of
light emitted, but the light amount adjustment may be
insufficient when a subject is too far away or too near.
• The distance for the built-in Video Flash to adjust the
appropriate amount of light will vary depending on the
subject, but it is approximately 1 – 2.5 m.
• When recording a close-up photo, specify Flash: Off.
Using the flash too near subject could cause a whitish
image.
• “ ( ” will blink during charging of the battery for Video
Flash.
• While “ ( ” is flashing, the video flash will not emit
light, though the DVD camera/recorder is recording.
• Do not use the Video Flash when approaching the
human eye. Emitting light from Video Flash near
human eye could damage the subject’s eyesight.
Especially when recording a baby or small child,
move the DVD video camera/recorder at least 1 m
away.
• Do not use the Video Flash while pointing it at a driver
in vehicle: Doing so could dazzle the driver, causing
an accident.
• Do not use the Video Flash in a place where there is
flammable or explosive gas: Doing so could cause fire
or explosion.
• When the DZ-FLH3 is attached to DZ-GX20E, the
built-in video flash in DZ-GX20E will not operate.
English
123
Viewing on TV Screen
Connecting to a TV
CONNECTING TO A TV
Use the provided AV/S output cable to connect the DVD video camera/recorder to a TV as follows:
To S-VIDEO
input jack*
To AV output jack
To video/audio
input jacks
Yellow
AV/S output cable
(provided)
White
Red
* If your TV has an S-VIDEO input jack, you can connect the S-VIDEO plug to it.
Note:
• Using S-VIDEO will deliver clearer playback status.
• Before connecting, make sure that the volume on TV
is turned down: Forgetting this may cause howling
(see “Terminology”, p. 152) from the TV speakers.
Stereo Type with
S-VIDEO Jack
S-VIDEO
AUDIO
R
Stereo Type
VIDEO
L
• Insert the AV/S output cable plugs into jacks straight:
Obliquely inserting them could damage the jacks.
AUDIO
R
Monaural Type
VIDEO
AUDIO
White
Red
Red
White
VIDEO
L
Yellow
Yellow
White
79
123
English
VIEWING ON TV SCREEN
1 Turn the TV on and set the input selector to
“VCR” whichever applicable Video input.
Refer to the TV instruction manual for how to
switch the TV input.
2 Turn the DVD video camera/recorder on.
The image that the DVD video camera/
recorder is seeing will appear on the TV
screen.
You can also monitor the image on the LCD
screen or viewfinder of the DVD video
camera/recorder.
3 Perform playback, recording or editing.
You can perform playback, editing or editing
on Disc Navigation while checking on TV
screen.
80
Note:
• Adjust the volume of sound on TV.
• The infrared remote control is useful when operating
the DVD video camera/recorder while viewing an
image on TV screen. However, if you use a Hitachi
VCR, the remote control may inadvertently operate
the VCR if it is near the DVD video camera/recorder.
To prevent this, set the remote control code of the
VCR to a position other than “VCR2”.
• Information that the DVD video camera/recorder is
recording will appear on the TV screen: You can also
display only part of information or switch off the
display. Refer to “SETTING ON-SCREEN DISPLAY
OUTPUT ON OR OFF (OSD OUTPUT)” on page 94,
and press the DISPLAY button to switch the display
status.
• When copy-guarded disc is played back, no image will
appear on TV screen.
• If you use TV with wide mode (aspect ratio 16:9) and
set the TV to the wide mode, the entire Disc
Navigation display may not be displayed on the TV
screen. If this happens, release the wide mode setting
on TV (see the TV instruction manual for releasing the
wide mode).
English
12
Playback on DVD Recorder/Player
PLAYING BACK DVD-RAM DISC
You can use a DVD recorder (see “Terminology”, p. 152) or DVD player that conforms to DVD-RAM to
play back 8 cm DVD-RAM discs recorded on this DVD video camera/recorder.
1 Insert the disc into the DVD recorder/player
and play it back.
See the instruction manual for DVD
recorder/player.
Note:
• When playing back disc on another device, the Disc
Navigation display will be different from the one on
this DVD video camera/recorder.
PLAYING BACK DVD-R DISC
1 Finalise a recorded DVD-R disc.
You need to finalise (see “Terminology”,
p. 152) a disc to play it back on DVD player:
See page 132.
No further data can be recorded on finalised
disc.
Note:
Use this DVD video camera/recorder to finalise the
DVD-R disc recorded on the DVD video camera/
recorder.
2 Insert the disc into the DVD player and play
it back.
Note:
• Do not insert a DVD-R disc that has not been finalised
into any DVD recorder: The disc may be unusable
(except for devices that allow playback of a DVD-R
disc not finalised on this DVD video camera/recorder).
• DVD-R discs recorded on this DVD video camera/
recorder or other 8 cm DVD-R discs can be played
back on other DVD players or other devices
conforming to 8 cm DVD-R, but playback on all DVD
players is not guaranteed.
• Playback may not be possible on some DVD players,
or it may depend on the recorded status of DVD-R
discs: In such cases, play back the DVD-R disc on
this DVD video camera/recorder. Also, playback on
DVD players may stop momentarily between scenes.
See the instruction manual for DVD player.
81
13
English
Recording (Dubbing) Images
Before You Begin
• Before connecting this DVD video camera/recorder to another device,
be sure to turn both devices off.
RECORDING (DUBBING) IMAGES ON OTHER VIDEO DEVICES
You can record (dub) images played back on this DVD video camera/recorder, on other video
devices.
Use the AV/S output cable (provided) to connect the DVD video camera/recorder to another video
device as shown in the following figure:
Signal flow
To AV output jack
AV/S output cable
(provided)
To S-VIDEO
input jack of
VCR, etc.*
To video/audio
input jacks
Yellow
White
Red
* If the video device to be connected has an S-VIDEO input jack, you can connect it to the DVD video camera/
recorder.
1 Press the DISC NAVIGATION button.
2 Select a scene to be played back.
3 Set the channel of the connected video device
to an external input.
4 Press the playback (A) button on this DVD
video camera/recorder and the record button
on connected device: The DVD video
camera/recorder will start playback and the
recorded device will record (dub) it.
82
Note:
• Using an S-VIDEO jack will deliver clearer images.
• Audio is heard from the speaker: If the volume is too
high, noise may enter the dubbed image.
• It is recommended that you use Disc Navigation to
create a play list including the scenes to be dubbed
among the scenes recorded on this DVD video
camera/recorder (p. 121).
• Be sure to use the AC adapter/charger to power the
DVD video camera/recorder from AC outlet, to prevent
battery power from shutting off during recording on
another video device.
• If you are using a Hitachi VCR, using the remote
control provided with this DVD video camera/recorder
may operate the VCR. To record (dub) images from
the DVD video camera/recorder to Hitachi VCR,
change the remote control code of VCR to a position
other than “VCR2”.
English
Advanced Techniques
This section explains about various settings to further extend the usefulness of this DVD
video camera/recorder.
Checking Flow of Normal Menu
The following two on-screen menu modes are available with this DVD video camera/recorder:
• Quick Menu: To display only the fundamental menu items for first timers (p. 66)
• Normal Menu: To display all menu items for experts
Camera Functions
Press the MENU button while the camera image is being displayed on the LCD monitor: The Normal
Menu will appear.
Use the f/e/d/c buttons to select a menu item, and then press the A button to choose
the option.
See page 67 for the setting method.
The screens used here to explain are displayed when DVD-RAM disc is used. Some items will not
appear when a DVD-R disc or card is used, or when no disc is inserted.
No menu appears during recording.
<Menu screen for setting>
Display of selected
setup item
Selection of setup items
S :
T:
U :
V:
W :
Camera Functions Setup
Record Functions Setup
Date Setup
LCD/EVF Setup
Initial Setup
Camer a F u nc t i on s
P r o g r am AE
Wh i t e Ba l .
EIS
D i g . Zoom
M IC . F i l t e r
ENTER
RETURN
Setup
Auto
Spo r t s
Po r t r a i t
Spo t l i gh t
Sand&Snow
Low L i gh t
RAM
Options settable
Display of disc or card
being used (p. 57)
Guide display
Functions settable
83
English
●Flow of Normal Menu
Refer to page indicated for details of each function.
Camera Functions Setup*7
Came r a Fun c t i ons
P r o g r am AE :
Wh i t e Ba l . :
EIS
:
D i g . Zoom :
M IC . F i l t e r :
ENTER
Se t up
Au t o
Au t o
On
40x
Of f
RETURN
Date Setup
Da t e Se t up
Da t e Se t
Da t e Mod e : M / D / Y
RAM
Programme AE (p. 85)
White balance (p. 87)
EIS*1 (p. 89)
Digital zoom (p. 59)
Microphone filter*2 (p. 89)
Flash*3 (p. 78)
*1: Not displayed when DZ-GX20E or DZ-MV780E is in
“N” or “P” status.
*2: Displayed only in “O” status.
*3: Displayed when DZ-GX20E is recording a photo
(not displayed when the optional Video Flash is
connected).
Record Functions Setup
ENTER
RETURN
RAM
Date setting (p. 40)
Display format*7 (p. 41)
LCD/EVF Setup*7
LCD / EVF Se t up
Ad j u s t
EVF D i s p l a y : Au t o
ENTER
RETURN
RAM
Adjust (p. 95)
EVF Display (p. 96)
Rec o r d F u n c t i o n s Se t up
V I DEO Mode
16:9
OSD Ou t pu t
ENTER
RETURN
Initial Setup
: F I NE
: Of f
: On
RAM
Movie quality*4 (p. 90)
16:9*5 (p. 91)
Self-timer*6 (p. 93)
On-screen information display output*7 (p. 94)
*4: Not displayed with DVD-RAM disc in “N” status.
The quality mode is displayed in “P” status. (p. 93)
*5: Not displayed in “N” or “P” status.
*6: Displayed with DVD-RAM disc in “N” status, or “P”
status.
*7: Not displayed in Quick Menu.
84
I n i t i a l Se t up
Beep
Power Save
Re c o r d LED
L a ng u age
Demo Mode
Reset
ENTER RETURN
:
:
:
:
:
On
Of f
On
Eng l i s h
Auto
RAM
Beep*7 (p. 97)
Power save*7 (p. 97)
Recording LED*7 (p. 98)
Language selection (p. 98)
Demo mode (p. 151)
Reset (p. 99)
English
123
Setting Up Camera Functions
Before You Begin
• See page 67 for how to set.
SELECTING SHOOTING MODE TO MATCH THE SUBJECT
(SWITCHING PROGRAMME AE MODE)
This DVD video camera/recorder automatically detects the status of subject and surrounding
situation and records the optimum image: If you choose the shooting mode to match the recording
conditions, clearer images will be recorded.
1 Press the MENU button, use the f/e/
d/c buttons to choose “Program AE” on
the “Camera Functions Setup” screen, and
then press the A button.
MENU
The options will appear on the right of
“Program AE”.
2 Use the f/e/d/
c buttons to choose
the desired option, and
then press the A
button: The selected
option will be set.
Camer a F u nc t i on s S e t u p
Auto
P r o g r am AE
Spo r t s
Wh i t e Ba l .
Po r t r a i t
EIS
D i g . Zoom
Spo t l i gh t
Sand&Snow
M IC . F i l t e r
Low L i gh t
ENTER RETURN
RAM
Use f / e / d / c to select,
and then press A to designate.
Selected AE mode
0:00:00
REM 3 0 MIN
FINE
30/
8:00
9 / 2 00 5
3 Press the MENU button to end the setting.
The menu screen will disappear.
Note:
• You can check the selected AE mode by the onscreen information display. However, nothing will
appear in the Auto mode.
• The shooting mode set as above will be stored in
memory even if the DVD video camera/recorder is
turned off.
• When recording in a dark area, an after-image will
appear when filming a moving subject or if camera
shake occurs (it is therefore recommended that you
use a tripod in such cases).
• If the Sports mode is used under a fluorescent light,
the image may flicker: In this case, use the Auto mode
for recording.
a Auto : The camera/recorder automatically
judges the subject and surrounding environment
for optimum recording.
Sports : Reduces blurring when recording
rapidly moving subjects such as in golf or tennis.
Portrait : Makes a subject, such as a person
or a creature, stand out from a blurred
background.
Spotlight : Prevents overexposure of subject
portrait face, etc. when strong light strikes the
subject, as in a wedding or on stage.
Sand & Snow : Prevents underexposure of
subject portrait face, etc. in a place where
reflection of light is intense, such as at the
seaside in midsummer or on a ski slope.
Low Light : Allows user to record in a dark
place even with decreased lighting.
Turn the LCD monitor 180º during recording:
The LCD monitor light can then be used for
recording.
85
English
RECORDING DARK SUBJECTS USING LCD MONITOR LIGHT
When Programme AE is set to Low Light, you can use the light from LCD monitor to record a subject.
1 Press the MENU button, and choose
“Program AE” from the “Camera Functions
Setup” menu.
2 Choose “Low Light”,
and designate it.
Camer a F u nc t i on s S e t u p
Auto
P r o g r am AE
Spo r t s
Wh i t e Ba l .
Po r t r a i t
EIS
Spo t l i gh t
D i g . Zoom
M IC . F i l t e r
Sand&Snow
Low L i gh t
ENTER RETURN
RAM
3 Press the MENU
button to end the
setting.
REM 3 9 4
30/
4 Open the LCD
monitor, turn it
180º so that it faces
the same direction
as the lens: The
LCD monitor will
light white.
86
8:00
9 / 2 00 5
Note:
• Use the viewfinder to check the image to be recorded.
• The LCD monitor light allows you to record a subject
up to 1 m even in a dark place.
An after-image will appear when filming a moving
subject or if camera shake occurs (it is recommended
that you use a tripod).
• If a subject cannot be focused properly, manually
adjust the focus (see page 74).
This DVD video camera/recorder automatically
adjusts the colour of subject. Change the white
balance setting depending on the recording
conditions.
Mode
Setting content
On-screen
display
Auto
White balance always
automatically adjusted
Set
You can manually adjust
white balance to match
the light source or
situation (p. 88)
h
Outdoor
To record in fine
weather
i
Indoor
To record under
incandescent light,
halogen light or bulbcolour type fluorescent
light
1 Press the MENU
button, choose “White
Bal.” on the “Camera
Functions Setup” menu
screen, and then press
the A button.
Note:
• The white balance mode can be confirmed using the
on-screen information.
• The white balance setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Do not block the infrared sensor (see “Terminology”,
p. 152) with hand, etc.
None
Infrared sensor block
j
Camer a F u nc t i on s S e t u p
P r o g r am AE
Au t o
Wh i t e Ba l .
Set
EIS
D i g . Zoom
Ou t do o r
I ndoor
M IC . F i l t e r
ENTER
RETURN
• If a tele or wide-conversion lens is used, the auto
white balance may not operate depending on the
recording conditions. If this happens, set to the mode
to match the recording conditions, or manually set the
white balance.
• Be sure to remove the lens cap before turning the
DVD video camera/recorder on: If the DVD video
camera/recorder is turned on with the lens capped,
the white balance will not work normally.
RAM
2 Choose the desired
option, and then press
the A button.
0:00:00
REM 3 0 MIN
FINE
30/
8:00
9 / 2 00 5
White balance mode
3 Press the MENU button to end the setting.
87
English
ADJUSTING COLOUR (WHITE BALANCE)
English
●Setting white balance manually
1 Point the DVD
Thick paper
video camera/
recorder at a white
object so that it fills
the screen. Use an
object that is not
transparent.
If focus is not
correct when the
white object fills the screen, manually focus
the object, referring to “Manually Focusing
Subject” (see page 74).
2 Press the MENU
button, choose “White
Bal.”, “Set”, and then
press the A button.
Camer a F u nc t i on s S e t u p
P r o g r am AE
Au t o
Wh i t e Ba l .
Set
EIS
D i g . Zoom
Ou t do o r
I ndoor
M IC . F i l t e r
ENTER
RETURN
RAM
3 Hold A pressed until
the “h” indicator
changes from blinking
to a steady light. When
the “h” indicator
lights, the white balance
setting will be
complete.
Se t
RAM
EX I T
4 Press the C button to
end the setting.
0:00:00
REM 3 0 MIN
FINE
88
30/
8:00
9 / 2 00 5
Note:
• The white balance set using the “Set” option will be
stored in memory until it is re-set.
• Do not use a coloured object when setting the white
balance: The appropriate tint cannot be set.
• The setting on white balance “Set” may not be
possible in a dark place. Also, the white balance
cannot be set when the zoom bar is in the digital
zoom range (p. 59). In such status, the “h” indicator
will remain blinking. Set the white balance in a bright
place with “Dig. Zoom Off” specified.
• If the recording conditions have changed, re-set the
white balance for appropriate colours.
• The setting will be stored in memory even when the
DVD video camera/recorder is turned off: The “h”
indicator will blink when the DVD video camera/
recorder is turned on next time. Re-set the white
balance as needed.
When you use zoom (see page 59) to record a magnified subject image, it will correct fuzziness in the
recorded image.
1 Press the MENU
button, choose “EIS” on
the “Camera Functions
Setup” menu screen,
and then press the A
button.
After recording with EIS set to “Off”, it is
recommended that you return the setting to
“On” and then turn the DVD video camera/
recorder off, unless you normally record with
“Off” setting.
Came r a F u nc t i on s Se t u p
P r o g r am AE
Wh i t e Ba l .
EIS
On
D i g . Zo om
Of f
M IC . F i l t e r
ENTER
RAM
RETURN
2 Choose the “On” or “Off”, and then press the
A button.
3 Press the MENU button to end the setting.
●Checking EIS On or Off
You can check EIS On or Off by the on-screen
information display.
0:00:00
REM 3 0 MIN
EIS
FINE
30/
8:00
9 / 2 00 5
Note:
• The EIS setting will be stored in memory even when
the DVD video camera/recorder is turned off.
• It is recommended that you specify “EIS Off” when
using the DVD video camera/recorder on a desk or
tripod.
• When “EIS On” is specified, there will be a slight
difference between the actual movement and the
movement on screen.
• Gross camera shake may not be entirely corrected
even if “EIS On” is specified: Firmly hold the DVD
video camera/recorder with both hands.
• EIS may not operate correctly when the tele or wideconversion lens is used.
• EIS cannot be used when recording photos on DZGX20E or DZ-MV780E.
RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM)
See page 59 for setting on digital zoom.
REDUCING WIND NOISE DURING RECORDING (MIC.FILTER)
When recording sound from the microphone built into this DVD video camera/recorder, you can
reduce wind noise in recording.
If “MIC.Filter: ON” is specified, the low-frequency components in the sound picked up by
microphone will be cut off during recording: This makes it easier to hear the target voice or sound
during playback.
1 Press the MENU
button, choose
“MIC.Filter” on the
“Camera Functions
Setup” menu screen,
and then press the A
button.
Camer a F u nc t i on s S e t u p
P r o g r am AE
Wh i t e Ba l .
EIS
D i g . Zoom
On
M IC . F i l t e r
Of f
ENTER RETURN
3 Press the MENU button
to end the setting.
RAM
2 Choose the desired option, and then press the
A button.
0:00:00
REM 3 0 MIN
FINE
30/
8:00
9 / 2 00 5
Note:
• You can also use the onMicrophone filter icon
screen display to confirm
that the MIC.Filter has been
set.
• The MIC.Filter setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• The MIC.Filter function will work only during movie
recording.
• The microphone filter function works only with the
built-in microphone: It will not function when using an
external microphone (p. 77).
89
English
USING THE ELECTRONIC IMAGE STABILISER (EIS)
English
Setting Up Record Functions
12
SWITCHING MOVIE QUALITY (VIDEO MODE)
Choose the movie quality from “XTRA”, “FINE”, “STD”.
It is recommended that you record critical subjects in the “XTRA” or “FINE” mode. (p. 31)
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“VIDEO Mode” on the
“Record Functions
Setup” menu screen,
and then press the A
button.
Re c o r d F u nc t i on s S e t u p
XTRA
F I NE
STD
V I DEO Mode
16:9
OSD Ou t p u t
ENTER
RETURN
RAM
2 Choose the desired quality mode, and then
press the A button.
3 Press the MENU button to end the setting.
Note:
• The movie quality setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• The “VIDEO Mode” setting will not change even if the
disc is replaced.
• When using DVD-R disc, you cannot switch the
setting on movie quality or wide-screen mode while
recording on the disc: The DVD video camera/
recorder will be automatically set to the movie quality
or wide-screen mode first used with the disc for
recording.
• The movie quality setting is effective only during
movie recording: The setting will not be displayed
during recording of stills.
0:00:00
REM 3 0 MIN
Movie quality
FINE
30/
8:00
9 / 2 00 5
Block-like noise may appear in recorded image, or the outline of subject image is distorted under the
recording conditions listed below: Pan the DVD video camera/recorder as slowly as possible. (Block
noise is likely to appear in the “STD” mode):
• If there is a complicated pattern in background (as in following figure on left)
• If the DVD video camera/recorder is moved excessively or quickly
• If subject is moving rapidly even when the DVD video camera/recorder is not moving
(Image when block-like noise occurs)
90
(Image without block-like noise)
When viewing recorded images later on a wide-screen TV (aspect ratio 16:9), specify wide-screen
(16:9) mode “On”: You can also record images with the aspect ratio changed (the aspect ratio with
“Off” is 4:3).
“16:9 On” specified
(aspect ratio 16:9)
“16:9 Off” specified
(aspect ratio 4:3)
1 Press the MENU button, choose “16:9” on the 2 Choose “On”, and then press the A button.
“Record Setup Functions” menu screen, and
3 Press the MENU button to end the setting.
then press the A button.
Re c o r d F u nc t i on s S e t u p
V I DEO Mode
16:9
OSD Ou t p u t
0 : 0 0 : 0 0
REM 3 0 MIN
On
Of f
FINE
ENTER
RETURN
3 0 /
8 : 0 0
9 / 2 00 5
RAM
16:9 mode icon
When viewing playback on an ordinary TV screen later, specify “16:9 Off”: Recording with “16:9 On”
specified will be played back on an ordinary TV with longer vertical direction of image.
An image recorded with “16:9 On” specified will appear as follows:
Display on LCD monitor screen
Display in viewfinder
91
English
12
SETTING TO WIDE TV SCREEN MODE (16:9 MODE)
English
Note:
• The 16:9 setting will be kept even after the DVD video camera/recorder is turned off.
• The 16:9 mode cannot be used with photo recording, or “STD” recording using DVD-R disc.
• Once the DVD-R disc has been recorded in the normal (4:3) mode, you will not be able to switch it to the widescreen mode using the same disc.
• Once a DVD-R disc has been recorded in the 16:9 mode, you will not be able to switch it to the normal (4:3) mode
using the same disc.
• Images recorded with “16:9 On” (aspect ratio 16:9) specified will be played back with the setting used during
recording regardless of the 16:9 setting then being used.
• The characters of dates and titles will be longer in the vertical direction on a wide-screen TV and on the LCD
monitor of this DVD video camera/recorder.
• When “16:9 On” is specified, black bands will appear across the top and bottom of LCD monitor screen (except on
menu or Disc Navigation screen, or playback image recorded with “16:9 Off” is specified).
• The 16:9 setting is not compatible with ID-1/ID-2*.
• To view images recorded at 16:9 setting, switch the aspect ratio of your TV: See TV instruction manual for this
switching.
• When using a video selector (see “Terminology”, p. 152), the TV may not automatically be switched to 16:9 mode.
* This system records the aspect ratio (16:9, 4:3) information in void space between video signals.
92
English
3
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality only when using card.
It is recommended that you use “FINE” when recording vital images. (p. 33 “SIZE AND
QUALITY OF PHOTOS”)
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Quality” on the
“Record Functions
Setup” menu screen,
and then press the A
button.
3 Press the MENU
Re c o r d F u nc t i on s S e t u p
ENTER
button to end the
setting.
F I NE
NORM
ECO
Qu a l i t y
Se l f T i me r
OSD Ou t p u t
REM 9 9 9
NORM
RETURN
30/
8:00
9 / 2 00 5
Still recording quality
2 Choose the option you want, and then press
the A button.
Note:
The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
13
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
The self-timer function is valid only when recording photos (stills).
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Self Timer” on the
“Record Functions
Setup” menu screen,
and then press the A
button.
4 Press the PHOTO button.
Re c o r d F u nc t i on s S e t u p
On
Of f
Se l f T i mer
OSD Ou t p u t
ENTER
RETURN
RAM
2 Select “On”, and then press the A button.
The self-timer will be set.
3 Press the MENU button to end the setting.
10
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the PHOTO button again
before recording starts, or press the C button.
REM 9 9 9
Self-timer recording
30/
8:00
9 / 2 00 5
93
123
English
SETTING ON-SCREEN DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)
If you connect this DVD video camera/recorder to a TV to view images on TV screen, you can
switch off the on-screen information (displayed in the viewfinder or on the LCD screen) from the TV
screen.
1 Press the MENU
3 Press the MENU button to end the setting.
Re c o r d F u nc t i on s S e t u p
button, use “Operating
Menu” (p. 67) to choose
“OSD Output” on the
“Record Functions
Setup” menu screen,
and then press the A
button.
V I DEO Mode
16:9
OSD Ou t p u t
ENTER
On
Of f
RETURN
RAM
2 Choose “On” or “Off”, and press the A
button.
Note:
• The “OSD Output” setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Even if “Off” is chosen, the on-screen information will
appear during playback. See page 65 for playback onscreen information display.
• Even after the on-screen information is removed from
the TV screen, it will still appear in the viewfinder or
on the LCD screen.
LCD screen or viewfinder
0:00:00
REM 3 0 MIN
“On” setting
FINE
30/
8 :00
9/ 2005
“Off” setting
0:00:00
REM 3 0 MIN
FINE
30/
8 :00
9/ 2005
TV screen
94
TV screen
English
123
LCD/EVF Setup
SETTING BRIGHTNESS OF LCD SCREEN (LCD BRIGHTNESS)
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Adjust” on the “LCD/
EVF Setup” menu
screen, and then choose
“LCD Brightness”.
LCD / EVF Se t up
Ad j u s t
EVF D i s p l a y
ENTER
RETURN
RAM
Use f / e / d / c to select,
and then press A to designate.
The brightness adjustment bar will appear on
the screen.
2 Use the d/c buttons
for adjustment.
Press d :
The screen becomes
dimmer.
Press c :
The screen becomes
brighter.
3 Press the MENU button to end the setting.
LCD / EVF Ad j u s t
LCD B r i g h t n e s s
EVF B r i g h t n e s s
Co l o r L e v e l
ADJUST
ENTER
RAM
Note:
The brightness setting will be stored in memory even
after the DVD video camera/recorder is turned off.
Brightness
adjustment bar
SETTING BRIGHTNESS OF VIEWFINDER (EVF BRIGHTNESS)
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Adjust” on the “LCD/
EVF Setup” menu
screen, and then choose
“EVF Brightness”.
2 Use the d/c buttons
for adjustment.
Press d :
The screen becomes
dimmer.
Press c :
The screen becomes
brighter.
3 Press the MENU button to end the
LCD / EVF Se t up
adjustment.
Ad j u s t
EVF D i s p l a y
ENTER
RETURN
RAM
Note:
The brightness setting is stored in memory even after
the DVD video camera/recorder is turned off.
LCD / EVF Ad j u s t
LCD B r i g h t n e s s
EVF B r i g h t n e s s
Co l o r L e v e l
ADJUST
ENTER
RAM
Brightness
adjustment bar
95
English
SETTING COLOUR DENSITY (COLOUR LEVEL)
You can adjust the colour density of the LCD monitor screen and viewfinder.
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Adjust” on the “LCD/
EVF Setup” menu
screen, and then choose
“Color Level”.
3 Press the MENU button.
LCD / EVF Se t up
Ad j u s t
EVF D i s p l a y
ENTER
RETURN
RAM
Note:
• The colour setting will be stored in memory even after
the DVD video camera/recorder is turned off.
• Even if the brightness or density of LCD monitor
screen or viewfinder is changed, the brightness or
density of the recorded image itself will not change.
The colour density adjustment bar will
appear on the screen.
2 Use the d/c buttons
for adjustment.
Press d :
For lighter colour.
Press c :
For denser colour.
LCD / EVF Ad j u s t
LCD B r i g h t n e s s
EVF B r i g h t n e s s
Co l o r L e v e l
ADJUST
ENTER
RAM
Colour density
adjustment bar
ALWAYS DISPLAYING IMAGE IN VIEWFINDER
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“EVF Display” on the
“LCD/EVF Setup”
menu screen.
Note:
The setting on EVF Display will be stored in memory
even after the DVD video camera/recorder is turned off.
LCD / EVF Se t up
Ad j u s t
EVF D i s p l a y
ENTER
Au t o
On
RETURN
RAM
2 Choose “On” and decide it.
3 Press the MENU button to end the setting:
Images will always appear in the viewfinder
regardless of whether the LCD monitor is
open/closed.
96
English
123
Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Setting
Content
On
Beep is heard when the power switch is changed over, the REC button is
pressed, etc.
Off
No beep is heard.
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Beep” on the “Initial
Setup” menu screen,
and then press the A
button.
I n i t i a l Setup
Be e p
Po w e r S a v e
R e c o r d LED
Language
Demo Mode
Reset
ENTER RETURN
2 Select “On” or “Off”, and then press the A
button.
On
Of f
3 Press the MENU button to end the setting.
RAM
Note:
The “Beep” setting will be stored in memory even when
the DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Setting
Content
On
To engage power save. If the DVD video camera/recorder is left in the recording
pause status without being operated for 5 minutes, it will automatically turn off to
prevent the battery from discharging needlessly.
Off
To cancel power save.
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Power Save” on the
“Initial Setup” menu
screen, and then press
the A button.
I n i t i a l Setup
Be e p
Po w e r S a v e
R e c o r d LED
Language
Demo Mode
Reset
ENTER RETURN
On
Of f
RAM
2 Select “On” or “Off”, and then press the A
Note:
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to “OFF”, and then set it to “O”,
“N” or “P”
• The Power Save setting will not appear in the onscreen information display.
• The Power Save setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
button.
3 Press the MENU button to end the setting.
97
English
TURNING RECORD LED ON OR OFF (RECORD LED)
You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Setting
Content
On
The recording indicator will light red to show that the DVD video camera/recorder
is recording.
Off
The recording indicator will not light even during recording.
2 Select “On” or “Off”, and then press the A
button.
3 Press the MENU button to end the setting.
Recording indicator
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Record LED” on the
“Initial Setup” menu
screen, and then press
the A button.
I n i t i a l Setup
Be e p
Po w e r S a v e
R e c o r d LED
Language
Demo Mode
Reset
ENTER RETURN
On
Of f
RAM
Note:
• The Record LED setting will not appear in the onscreen information display.
• The Record LED setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Specify “Record LED: Off” when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
• Even if “Record LED Off” is specified, the recording
indicator will light while the self-timer is counting
down.
CHANGING DISPLAY LANGUAGE (LANGUAGE)
You can change the language used to display the menu and information.
The following shows that English is changed to French.
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Language” on the
“Initial Setup” menu
screen, and then press
the A button.
2 Select “Français”, and
then press the A
button.
98
I n i t i a l Se t up
Be e p
Po w e r S a v e
R e c o r d LED
L an gu age
Demo Mode
Reset
ENTER RETURN
3 Press the MENU button to end the setting.
Eng l i sh
F r ança i s
Español
Deu t sh
I t a l i ano
RAM
Con f i g u r a t i on I n i t i a l e
Be e p
Po w e r S a v e
LED E n r g.
L an gu e
F r ança i s
Mode Démo
Régl Défaut
ENTRER RETOUR
RAM
Note:
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
You can restore menu settings to defaults (initial settings at the factory (p. 170)). (Note, however, that
the date/time will not be reset.)
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Reset” on the “Initial
Setup” menu screen,
and then press the A
button.
3 Press the MENU button to end the setting.
I n i t i a l Setup
Be e p
Po w e r S a v e
R e c o r d LED
Language
Demo Mode
Reset
ENTER RETURN
Note:
To cancel resetting midway, choose “NO” on the screen
for verification in step 2 or press the C button.
RAM
The screen for verifying reset will appear.
2 If you are sure that you
wish to reset, use the
d button to choose
“YES”, and then press
the A button.
Re s e t
Re s e t ?
YES
ENTER
NO
RAM
The setting items have
now been reset to defaults.
99
English
RESETTING MENU SETTINGS TO DEFAULTS (RESET)
English
Disc Navigation
123
Using Disc Navigation
STARTING OR TERMINATING DISC NAVIGATION
Disc Navigation is a tool for editing scenes recorded on this DVD video camera/recorder.
Here is an explanation on “scene” and “programme”, so that you will be able to make most use of
Disc Navigation function.
The screens in this instruction manual are basically those that will appear when DVD-RAM disc is
used: Some items will not appear when DVD-R disc or card is used, but the operation is the same.
Before You Begin
• Turn the DVD video camera/recorder on (p. 47).
• When using disc: Set the power switch to “O” or “N”.
• When using card: Set the power switch to “P”.
1 Press the DISC NAVIGATION button.
The Disc Navigation screen (shown on
page 101) will appear.
DISC
NAVIGATION
2 Press the DISC NAVIGATION button again.
Disc Navigation will be terminated and the
DVD video camera/recorder will enter the
recording pause status.
You can also press the C button to end Disc
Navigation.
100
Thumbnail (see “Terminology”, p. 152)
A l l Pr og r ams
0 01 / 014
Selected scene number*1/
Number of all scenes
Cursor
Current page position*4
Bar graph
Still image icon*2
Operation guide*3
*1
*2
*3
*4
*5
PLAY
RAM
Disc type icon*5
Scene number refers to display number on thumbnail display screen.
No still icon will appear for card.
The operation guide will vary depending on the operation status of DVD video camera/recorder.
Appears when 13 scenes or more have been recorded.
“ 690R” will appear for DVD-R disc. “ ” will appear for card.
Icons to be displayed on thumbnail:
.......................Photo (p. 54)
....................Skip (p. 112)
[ ......................... Fade-in (p. 111)
] ......................... Fade-out (p. 111)
....................... Lock (p. 115)
Note:
• The background colour of screen allows you to
identify whether disc or card is used on this DVD
video camera/recorder.
- Purple: When disc is used.
- Green: When card is used.
• Pressing the DISPLAY button will display the
recording date/time of the scene on which the cursor
is placed in the space for operating guide. Pressing
DISPLAY again will display the operating guide.
• If no disc or card is inserted, the Disc navigation
screen cannot be displayed even by pressing the
DISC NAVIGATION button.
• Each time Disc Navigation is started with a DVD-R
disc inserted, message “Creating Thumbnail ...” will
appear. After the message appears, the Disc
Navigation screen will appear.
• If the following disc or card is inserted, the Disc
Navigation screen will appear or some message will
be displayed:
- Write-protected disc
- finalised DVD-R disc
- Locked card
• Do not leave the disc navigation screen displayed on
TV to which the DVD video camera/recorder is
connected: Doing so could damage the TV screen,
possibly by burning.
101
English
Disc Navigation screen
English
PLAYING BACK FROM DISC NAVIGATION SCREEN
1 Press the DISC NAVIGATION button.
2 Use the f/e/d/c buttons to select
3 Press the A button.
Playback will start from the selected scene.
the desired scene.
Note:
Pressing the d or c button will move the cursor
to the preceding or following scene.
Pressing the f or e button will move to
preceding or following page.
The selected scene will be framed: This is
called a “cursor”.
A l l Pr og r ams
Up
0 01 / 014
Left
PLAY
RAM
A l l Pr og r ams
0 07 / 014
Right
Down
PLAY
RAM
A
●When playback ends:
The DVD video camera/
recorder will enter the
playback pause status at
the last image of last scene.
Pressing the C or DISC
NAVIGATION button will
restore the Disc
Playback pause
Navigation screen.
When the playback pause
status continues for as long as 5 minutes, the
Disc Navigation screen will automatically be
restored.
●Playing back photos
A photo on DVD-RAM disc will be displayed
for approx. 3 seconds. When playing back
photos on card, playback will stop after each
photo playback.
102
Note:
• Press the A button to temporarily stop playback.
Pressing A again will start from that point.
• If you press the A button after playback of the last
scene on disc finishes, playback will start again from
the beginning of disc.
• Pressing the C button will always restore the Disc
Navigation screen.
• When playing back photos on card, “Playback” will
appear. In the case of a photo with a large number of
pixels, it will take some time for the photo to appear.
1 Press the DISC NAVIGATION button.
2 Use the f/e/d/c buttons to select
Repeat steps 2 and 3 to randomly select
multiple scenes.
the desired scene.
3 Press the SELECT button once:
The selected scene will be framed in red and
yellow.
SELECTING CONSECUTIVE SCENES TOGETHER
1 Press the DISC NAVIGATION button.
2 Use the f/e/d/
c buttons to select the
desired scene.
A l l Pr ogr ams
Note:
• You can know the status of scenes from the colours of
cursor and bargraph:
005 / 014
RAM
PLAY
Yellow frame
3 Hold down the
SELECT button for at
least one second:
The selected scene will
be doubly framed in
yellow and blue.
4 Use the f/e/d/
c buttons to select the
last scene in the range
you want, and then
press the A button:
A l l Pr ogr ams
ENTER
RAM
CANCEL
Double frames in
yellow and blue
A l l Pr ogr ams
PLAY
The thumbnails of
scenes in the specified
range will be framed in
red, and then selected.
005 / 014
DESELECT ALL
Cursor
Bar graph
Yellow
Light blue Current cursor position
Blue
Light blue
Red
Red
Status of scenes
Range of scenes being
selected
Scenes already selected
• Pressing the A button after selecting scenes will
play back only the selected scenes from the
beginning of each.
• To cancel a selected scene, select the scene to be
cancelled, and then press the SELECT button.
To cancel all selected scenes, press the C button.
• You can also select scenes in reverse from the last
scene in the range.
• To release multiple selection, press the C or SELECT
button before pressing the A button in step 4.
• Up to 999 scenes can be selected for both disc and
card.
010/ 014
RAM
Red
frame
When scenes up to
this point are selected
103
English
SELECTING MULTIPLE SCENES
English
FUNCTIONS AVAILABLE WITH DISC NAVIGATION
The Disc Navigation mode will allow a variety of further operations.
Functions Available with Disc Navigation
Available function
Disc or card used
Contents
Reference
page
Editing of scenes
1
You can delete unnecessary scenes,
combine scenes, or divide one scene.
107 – 110
Setting special effects to
scenes
1
You can attach fade and skip to a
scene, and change existing thumbnails.
111 – 113
Scene information
display
123
You can display information on one
scene or multiple scenes, such as
image quality, recording time, etc.
117
Changing title
1
You can change the title of play list or
programme.
119, 127
Creation of play list
1
You can create an original movie by
changing the combination of scenes.
121
13
You can initialise a DVD-RAM disc or
card so that it can be used on this DVD
video camera/recorder.
129
13
You can copy photos recorded on DVDRAM disc to card.
114
You can use this DVD video camera/
recorder to finalise any DVD-R disc
recorded on it so that the disc can be
viewed on DVD player, etc.
132
You can repeatedly play back
programmes and scenes.
133
Disc or Card
initialisation
Copy from disc to card
Disc finalisation
2
Repeat play
12
Slide show
3
You can play back stills continuously.
134
123
The remaining recordable movie time
or number of recordable stills is
displayed.
130
Disc protection
1
You can protect the DVD-RAM disc to
prevent deletion or editing by mistake.
130
Deleting scene
3
You can delete unnecessary scenes.
107
You can lock any scene so that it will
not be deleted by mistake: Essential
scenes are thereby protected, and
recording another still is possible.
115
3
Remaining display
(Capacity)
Scene lock
Note:
Setting special effects to scenes (fade, skip, thumbnail) are unique to this DVD video camera/recorder. When a disc
with any effects set on this DVD video camera/recorder is directly played back on a DVD recorder/player or read into
PC, the set effect results will not be reflected in the playback or reading. To reflect the set effect results, connect
both devices using the AV/S output cable and then perform recording (Dubbing, p. 82).
104
Press the MENU button on the Disc Navigation screen: The menu screens for Disc Navigation and
menu screens for disc and card will appear.
See “Checking Flow of Normal Menu” on page 83.
Refer to pages indicated for details of settings.
●When using DVD-RAM disc
Scene
Play list
Edit
Effect
Copy
Select
Detail
(p. 107)
(p. 111)
(p. 114)
(p. 116)
(p. 117)
Switch
Play
Create
Edit
Title
Delete
(p. 122)
(p. 122)
(p. 121)
(p. 123 – 126)
(p. 127)
(p. 127)
Program
Switch
Play
Title
(p. 118)
(p. 119)
(p. 119)
Others
Category
Repeat Play
ETC
Divide
Delete
Combine
Move*
(p. 109)
(p. 107)
(p. 110)
(p. 110)
Fade
Skip
Thumbnail
(p. 111)
(p. 112)
(p. 113)
Start → Current
Current → End
All
(p. 116)
(p. 116)
(p. 116)
* Will appear when a
play list is displayed.
Go To
Top
End
Disc
Format Disc
Protect Disc
Capacity
Update Control Info.
(p. 133)
(p. 133)
All
VIDEO
PHOTO
(p. 133)
(p. 133)
(p. 133)
On
Off
(p. 133)
(p. 133)
(p. 128)
(p. 128)
(p. 129)
(p. 130)
(p. 130)
(p. 131)
●When using DVD-R disc
Scene
Select
Detail
(p. 116)
(p. 117)
Start → Current
Current → End
All
Program
Switch
Play
(p. 118)
(p. 119)
Disc
Go To
Top
End
(p. 128)
(p. 128)
Others
Repeat Play
ETC
(p. 133)
(p. 116)
(p. 116)
(p. 116)
Finalize Disc
Capacity
On
Off
(p. 132)
(p. 130)
(p. 133)
(p. 133)
105
English
UNDERSTANDING FLOW OF DISC NAVIGATION MENU
English
●When using card
Scene
Delete
Lock
Select
Detail
(p. 107)
(p. 115)
(p. 116)
(p. 117)
Go To
Top
End
(p. 128)
(p. 128)
Card
Format Card
Capacity
106
Start → Current
Current → End
All
Slide Show
(p. 129)
(p. 130)
(p. 116)
(p. 116)
(p. 116)
Start
(p. 134)
13
DELETING SCENES (EDIT – DELETE)
You may want to delete unwanted scenes.
Scenes on DVD-R disc cannot be deleted, and menu item “Delete” will not appear with DVD-R disc.
1 Press the DISC NAVIGATION button.
2 Select the scene to be
deleted.
All Programs
7 Press the C button to
quit.
De l e t e Sc en e
0 05 / 0 1 3
0 05 / 0 1 4
3 Press the MENU
ENTER
EX I T
RAM
button.
PLAY
DESELECT ALL
RAM
Scene to be deleted
4 Choose “Scene”,
“Edit”, “Delete”, and
then press the A
button.
When using card,
choose “Scene”,
“Delete”, and then
press the A button.
Sc ene
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
De v i de
De l e t e
Comb i n e
ETC
ENTER
RETURN
RAM
5 The “Delete Scene” screen will appear: If you
Note:
• If you point the cursor at the scene to be deleted on
DISC NAVIGATION screen, and then press the
DELETE button on remote control, the screen in step
5 will appear.
• To delete an unwanted part of a scene on DVD-RAM
disc, divide the scene first, and then delete the
unnecessary part (see page 109).
• If you delete all data on disc or card, initialising the
disc or card will be recommended (see page 129).
• If the time of deleted scenes (stills) is quite short, the
remaining free space of disc may not increase in the
disc or card remaining indicator.
• The locked scenes on card cannot be deleted (see
page 115).
are sure you want to delete the selected scene,
press the A button.
If you want to change the scene to be deleted,
you can change it on this screen.
6 The screen for verifying
deletion will appear:
Choose “YES”, and then
press the A button.
De l e t e Sc en e
30 / 9 / 2005 8 : 0 0 : 00
Scene No. 005
De l e t e sc en e?
YES
NO
ENTER
Choose “NO” to cancel
deletion.
After Yes or No setting, the “Delete Scene”
screen will be restored.
Repeat steps 5 and 6 to delete other scenes.
107
English
Scene
English
●Editing using submenu
Press the MENU button before pressing the A button in step 5 (see page 107): The submenu will
appear.
Ed i t
Se l e c t
De l e t e
Ex i t
ENTER
Edit
Select
Go To
RETURN
Go To
S t a r t – Cu r r en t
Cu r r en t – End
All
RAM
ENTER
RETURN
To p
En d
RAM
ENTER
RETURN
RAM
Delete .................. To delete selected scenes
Exit....................... To restore the Disc Navigation screen
Start → Current.. To select scenes from the start to the one that the cursor is on at
the moment
Current → End... To select scenes from the scene the cursor is on to the end
All ........................ To select all scenes
Top ....................... To move the cursor to the first scene
End....................... To move the cursor to the last scene
Pressing the C button will restore the screen in step 5.
Note:
Although the submenu screen will appear for each setting, some menu items may not appear, depending on the
setting.
108
English
1
DIVIDING MOVIES (EDIT – DIVIDE)
You can divide a scene into two parts.
To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary
portion.
1 Press the DISC NAVIGATION button.
2 Select the scene to be divided.
3 Press the MENU button.
4 Choose, “Scene”,
Sc ene
“Edit”, “Divide” and
then press the A
button.
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
De v i de
De l e t e
Comb i n e
ETC
5 The “Divide Scene”
ENTER
RAM
RETURN
screen will appear: If
you are sure you want to divide the selected
scene, press the A button: The selected
scene will be played back.
If you want to change the scene to be divided,
you can change it on this screen.
6 When you reach the
Se l ect D i v i s i o n Po i n t
002 RAM 0 : 00 : 18
point where you want
to divide the scene,
press the SELECT
button.
SEL ENTER
Note:
• If you press the MENU button before pressing the
A button in step 5, the submenu will appear (see
page 108).
• Search and frame advance are useful when
designating division points.
• Combining scenes that were divided will restore the
original scene (see page 110).
• If a special effect has been added to the original
scene, the “IN” effect will be added to the first half of
scene, and the “OUT” effect, to the latter half.
• The division point may drift before or after the
designated point by approximately 0.5 seconds.
• Since a scene with a skip set cannot be played back,
no division point can be specified: Release the skip
for the scene before dividing it.
• If the division point is at a still, a message will appear,
but no division will be made.
• If the division point is at the start or end of a scene, a
message will appear, but no division will be made.
• A movie scene whose recording time is 0.5 seconds
or less cannot be divided.
• If free space available on disc is insufficient, division
will not be possible: Delete unnecessary scenes.
CANCEL
The status bar of
scene being played
back can be switched
off or on by pressing
the DISPLAY button.
7 The screen for verifying
division will appear:
Choose “YES”, and then
press the A button.
D i v i de Scene
D i v i de s cene?
YES
NO
ENTER
Choose “NO” to cancel
division.
After division, the “Divide Scene” screen will
be restored.
Repeat steps 5 – 7 to divide another scene.
8 Press the C button to quit.
109
1
English
COMBINING MULTIPLE SCENES (EDIT – COMBINE)
If you have recorded numerous short scenes, combining them will be facilitated by the use of Disc
Navigation.
Be sure to select consecutive multiple scenes. Combining scenes is possible only when “Category:
All” is specified (p. 133). Stills cannot be combined.
1 Press the DISC NAVIGATION button.
2 Select the consecutive multiple scenes to be
combined.
6 The screen for verifying
combination will
appear: Choose “YES”,
and then press the A
button.
“Edit”, “Combine” and
then press the A
button.
5 The “Combine Scenes”
Sc ene
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
De v i de
De l e t e
Comb i n e
ETC
ENTER
RETURN
screen will appear: If
you are sure you want to combine the
selected scenes, press the A button.
If you want to change the scenes to be
combined, you can change them on this
screen.
RAM
Comb i ne s c e n e s ?
YES
NO
ENTER
See page 103 when selecting multiple scenes.
3 Press the MENU button.
4 Choose, “Scene”,
Comb i ne Sc e n e s
The two images
appearing on the verification screen are those
of the first and last scenes to be combined.
Choose “NO” to cancel combination.
After Yes or No setting, the “Combine
Scenes” screen will be restored.
The thumbnail of the first scene will appear in
the combined scene.
Repeat steps 5 and 6 to combine other scenes.
7 Press the C button to quit.
Note:
• If you press the MENU button before pressing the
A button in step 5, the submenu will appear (see
page 108).
• With fade effect, the “IN” effect of the first video in the
selected range and the “OUT” effect on the last video
will be attached to a combined scene.
• Scenes in different programmes (different recording
dates) cannot be combined: Create a play list first,
and then combine such scenes on the play list.
1
ARRANGING ORDER OF SCENES (EDIT – MOVE)
You can arrange scenes within a play list by moving them to desired positions. (p. 126) Create a play
list first, and then arrange the scenes [“CREATING NEW PLAY LIST (CREATE)”, p. 121].
110
English
1
DIRECTING SCENES EFFECTIVELY (EFFECT – FADE)
You can add fading to the beginning and/or end of scene.
There are three types of special effects:
Fade Out
Fade Out
Fade Out
Fade In
White:
Fades in from white screen
Fades out to white screen
Fade In
Fade In
Wipe:
Fades in from black screen
to vertical direction of screen
Fades out from vertical
direction of screen to black
screen
B/W:
Fades in from Black and
White screen to colour
screen
Fades out from colour screen
to Black and White screen
1 Press the DISC NAVIGATION button.
2 Select the scene for adding special effects.
3 Press the MENU button.
4 Choose, “Scene”,
“Effect”, “Fade” and
then press the A
button.
5 The “Fade Set” screen
If you choose “Enter” and press A, the
“Fade Set” screen will be restored after a
message appears.
Repeat steps 5 and 6 to add fade to other
scenes.
7 Press the C button to quit.
Sc ene
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
F ad e
Sk i p
T h umbna i l
ETC
ENTER
RAM
RETURN
will appear: If you are
sure you want to add the fade effect to the
scene, press the A button.
The “[” and/or “]” icon(s) will appear in
the scenes for which fade in and/or fade out
have been set.
A l l Pr og r ams
If you want to change the scene to which fade
is added, you can change it on this screen.
6 Select the special effects
for “IN” and/or
“OUT”, choose “Enter”,
and then press the A
button.
0 05 / 013
“In” effect
PLAY
RAM
“Out” effect
Fa d e
IN
None
OUT
None
Wh i t e Wi pe
B/W
Wh i t e Wi pe
B/W
En t er
Canc e l
ENTER
You can use f/e to
move the cursor to “IN”, “OUT”, “Enter” or
“Cancel”.
Use d/c to choose the effect to be added,
and then press A to set the effect.
To cancel setting, choose “Cancel”.
111
1
English
PLAYING BACK BY SKIPPING SCENES (EFFECT – SKIP)
You can specify “Skip” for scenes you do not want to play back: The selected scenes will be skipped.
1 Press the DISC NAVIGATION button.
2 Select the scene to be skipped.
3 Press the MENU button.
4 Choose “Scene”,
“Effect”, “Skip”, and
then press the A
button.
5 The “Set Skip” screen
6 Press the C button to quit.
A skip icon “
” will appear in the
thumbnail of any scene for which skipping
has been set.
A l l Pr og r ams
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
Skip icon
F ad e
Sk i p
T h umbna i l
PLAY
ETC
ENTER
RETURN
RAM
RAM
will appear: If you are
sure you want to skip the selected scene,
press the A button.
If you want to change the scene to be
skipped, you can change it on this screen.
After skip setting, the “Set Skip” screen will
be restored.
Repeat step 5 to set skipping of other scenes.
112
0 01 / 013
Sc ene
●Releasing Skip
Perform the same procedure as setting skip: The
skip icon will disappear and skipping of the
scene will be released.
Note:
• Multiple scenes can be selected for skipping (p. 103).
• If you press the MENU button before pressing the
A button in step 5, the submenu screen will appear
(p. 108).
Normally, the first image of the recorded scene is displayed as a thumbnail: You can choose another
image of the scene for thumbnail. If you set a vivid image to thumbnail, you can know what you
recorded from a glance at the Disc Navigation screen.
Original thumbnail
You can use this image as thumbnail.
●
●
●
1 Press the DISC NAVIGATION button.
2 Select the thumbnail of the scene to be
7 The screen for verifying
switching of thumbnail
will appear: Choose
“YES”, and then press
the A button.
changed.
3 Press the MENU button.
4 Choose “Scene”,
“Effect”, “Thumbnail”,
and then press the A
button.
●
●
Cha ng e Th umbna i l
Cha ng e t h umbna i l ?
YES
NO
ENTER
Choose “NO” to cancel
switching of thumbnail.
After Yes or No setting, the “Change
Thumbnail” screen will be restored.
Repeat steps 5 – 7 to change the other scenes.
Sc ene
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
F ad e
Sk i p
T h umbna i l
ETC
ENTER
5 The “Change
●
RETURN
RAM
Se l e c t Th umb na i l Po i n t
Thumbnail” screen will
appear: If you are sure
you want to change the
thumbnail of the
SEL ENTER
CANCEL
selected scene, press the
A button: The
selected scene will be played back.
8 Press the C button to quit.
Note:
• If you press the MENU button before pressing the
A button in step 5, the submenu screen will
appear. (See page 108)
• A thumbnail of still cannot be changed.
• Since the scene to which skipping is set cannot be
played back, you will not be able to change its
thumbnail: Release the skip setting of the scene to
change the thumbnail.
If you want to change the scene whose
thumbnail is to be changed, you can change it
on this screen.
6 When the image you want to use as the
thumbnail of the scene appears, press the
SELECT button.
113
English
1
CHANGING IMAGES FOR THUMBNAILS (EFFECT – THUMBNAIL)
13
English
COPYING STILLS ON DVD-RAM DISC TO CARD (COPY)
1 Set the power switch to “O” or “N“.
2 Press the DISC NAVIGATION button.
3 Select the still to be copied.
4 Press the MENU button.
5 Choose “Copy” on the
“Scene” menu screen,
and then press the A
button.
Sc ene
Ed i t
Ef fect
Copy
Se l e c t
De t a i l
ETC
ENTER
6 The “Copy to card”
screen will appear: If
you are sure you want
to copy the selected
still, press the A
button.
RAM
RETURN
Copy t o c a r d
ENTER
003/014
RAM
EX I T
If you want to change the still to be copied,
you can change it on this screen.
7 The screen for verifying
copy will appear:
Choose “YES”, and then
press the A button.
Copy t o c a r d
Copy PHOTO s c e n e s
to card?
YES
NO
ENTER
Choose “NO” to cancel
copy.
After Yes or No setting, the “Copy to card”
screen will be restored.
Repeat steps 6 and 7 to copy other stills to
card.
8 Press the C button to quit.
114
Note:
• No movie can be copied.
• If you press the MENU button before pressing the
A button in step 6, the submenu screen will appear
(p. 108).
• See “Category” (p. 133) to check the stills recorded
on DVD-RAM disc.
• You can also select multiple scenes (p. 103).
• Even if all scenes, including movies, are selected to
be copied, only stills will be copied.
• Data on card cannot be copied to disc.
• The quality of still copied from disc to card will be the
same as when you recorded still on disc.
• Stills recorded on a device other than this DVD video
camera/recorder may not be copied normally.
English
3
LOCKING SCENES ON CARD (LOCK)
You can lock each photo recorded on card so that it will not be deleted or edited by mistake.
1 Set the power switch to “P”.
2 Press the DISC NAVIGATION button.
3 Select the scene to be locked.
4 Press the MENU button.
5 Choose “Lock” on the
“Scene” menu screen,
and then press the A
button.
6 The “Lock Set” screen
Sc ene
De l e t e
Lock
Se l e c t
De t a i l
ENTER
●To unlock the scene:
Select the locked scene, and then use the same
procedure as above to unlock the scene: The lock
icon will disappear and locking will be released.
Note:
• If you press the MENU button before pressing the
A button in step 6, the submenu screen will appear
(p. 108).
• You can also select multiple scenes (p. 103).
• When initialising the card, the locked scenes will also
be deleted.
RETURN
will appear: If you are
sure you want to lock the selected scene,
press the A button.
L o ck Se t
7 / 19
Lock icon
ENTER
EX I T
If you want to change the scene to be locked,
you can change it on this screen.
After setting, the “Lock Set” screen will be
restored.
Repeat step 6 to lock another scene.
7 Press the C button to quit.
The lock icon “ ” will appear on any scene
for which lock has been set.
115
123
English
SELECTING SCENES USING MENU SCREEN (SELECT)
You can use this “Select” function to select consecutive scenes at one time.
This function is useful when there are numerous scenes.
1 Press the DISC NAVIGATION button.
2 Point the cursor at the first or last scene to be
4 Choose “Select” on the “Scene” menu screen.
5 Choose “Start →
Current”, “Current →
End” or “All” and then
press the A button.
selected: When selecting all scenes, simply
proceed with step 3.
3 Press the MENU button.
Sc ene
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
ETC
ENTER
A l l Pr ogr ams
S t a r t – Cu r r en t
Cu r r en t – End
All
RAM
RETURN
006 / 011
Current scene
RAM
PLAY
A l l Pr ogr ams
PLAY
DESELECT ALL
006 / 011
A l l Pr ogr ams
RAM
“Start → Current” is specified:
The scenes from the first to
current will be selected.
PLAY
006 / 011
DESELECT ALL
RAM
“Current → End” is specified:
The scenes from the current to
end will be selected.
A l l Pr ogr ams
PLAY
DESELECT ALL
006 / 011
RAM
“All” is specified:
All scenes from the first to end
will be selected.
●Deselecting selected scenes
Deselecting scenes one by one:
While you are displaying the “All Programs”
screen on which scenes have been selected,
choose the scene to be deselected and then press
the SELECT button.
Note:
Up to 999 scenes can be selected.
116
Deselecting all the selected scenes at once:
While you are displaying the “All Programs”
screen on which scenes have been selected, press
the C button.
You can display various information for a scene: the recording mode, recording date/time and
length, special effects and movie quality mode.
1 Press the DISC NAVIGATION button.
2 Select the scene whose information you wish
to know.
Note:
• If multiple scenes have been selected, the total
recording time of the selected scenes (total number in
case of stills) will appear.
(When using disc)
3 Press the MENU button.
4 Choose “Scene”, “Detail”, and then press the
A button.
*1
*2
The detailed information on the scene will
appear.
(When using disc)
(When using card)
*2
De t a i l
*1
De t a i l
Sc e n e N o. 0 0 7
V IDEO (F I NE ) 1m i n13 s e c
Da t e : 30 / 9 / 2005
8 : 00 : 00
Sk i p :Of f
Fa d e IN : None OUT :None
PREV
NEXT
RETURN
Sc e n e N o. 7
1 0 0–0 0 0 7 ( 6 40 )
Da t e : 30 / 9 / 2005
8 : 00 : 00
L o c k :O f f
PREV
NEXT
*3
RETURN
*1 Not displayed with DVD-R disc.
*2 May not appear if the loaded card does not
comply with DCF.
*3 Number of pixels on still in horizontal direction:
This may not appear with a JPEG file that does
not conform to this DVD video camera/recorder.
Note:
• DCF (Design rule for Camera File system) is a
unified image file format for video cameras: Image
files can be commonly used for all digital devices
that conform to DCF.
• Pressing the c button will display information on
the following scene; pressing the d button will
display information on the preceding scene.
De t a i l
V I DEO : 1m i n43sec ( 2s c e n e s )
( XTRA) : 0m i n 0sec ( 0s c e n e s )
( F I NE) : 1m i n43sec ( 2s c e n e s )
( STD ) : 0m i n 0sec ( 0s c e n e s )
( - - - ) : 1m i n 0sec ( 0s c e n e s )
PHOTO : 0
RETURN
*1 Number of scenes whose quality mode is
unknown:
This will appear when the disc has a scene
recorded on a device other than this DVD video
camera/recorder, only if the disc has a scene
whose mode is unknown.
Also, this will not appear when a DVD-R disc is
used.
*2 This will not appear with DVD-R disc, since no
still image can be recorded on it.
(When using card)
De t a i l
Scene No. 6
27 / 9 / 2005 1 2 : 5 0 : 00
Scene No. 7
30 / 9 / 2005
Scenes: 2
RETURN
8 : 00 : 0 0
• If a DVD-R disc recorded on a device other than this
DVD video camera/recorder is inserted (already
finalised), no scene information will appear.
5 Press the C button to quit.
117
English
123
DISPLAYING INFORMATION USING MENU SCREEN (DETAIL)
English
Programme
WHAT IS “PROGRAMME”?
Programme refers to an assembly of scenes recorded on the same date regardless of whether they are
movie or still.
Scene No. 1
Movie
Scene No. 2
9:00 Movie
Scene No. 3
10:20 Still
Scene No. 4
11:45 Still
Scene No. 5
13:30 Movie
Scene No. 6
17:20 Still
20:00
Programme No. 1
Recorded on September 10
12
SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SWITCH)
Since the scenes recorded on this DVD video camera/recorder are collected as “programmes” for
each recording date, selecting a programme will allow you to display only the scenes on a specific
date.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose
“Switch” on the
“Program” menu
screen, and then press
the A button.
4 Select the programme
to be displayed, and
then press the A
button.
The Disc Navigation
screen of the selected
programme will
appear.
P r og r am
Sw i t c h
Play
Ti t le
ETC
ENTER
RETURN
RAM
Sw i t c h P r og r am
All
01 3 0 /
02 10 /
03 30 /
ENTER
Pr og r ams
8 / 2005
9 / 2005
9 / 2005
RETURN
03 30 / 9 / 2005
PLAY
118
Note:
• Pressing the C button on the “Switch Program”
screen will restore the Disc Navigation screen.
• If a DVD-RAM or DVD-R disc recorded on another
device is loaded in this DVD video camera/recorder,
the programme may not be a collection of recordings
on the same date.
0 01 / 008
RAM
English
12
PLAYING BACK PROGRAMME (PLAY)
You can play back only the selected programme.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose “Play”
on the “Program”
menu screen, and then
press the A button.
4 Select the programme to be played back, and
then press the A button.
Playback will start from the first scene of the
selected programme.
P r og r am
S t a r t P r og r am
Sw i t c h
Play
Ti t le
ETC
ENTER
RETURN
RAM
All
01 3 0 /
02 10 /
03 30 /
ENTER
Pr og r ams
8 / 2005
9 / 2005
9 / 2005
RETURN
8:00
30 / 9 / 20 0 5
Note:
If “Repeat Play: On” is specified, the selected
programme will be repeatedly played back (PLAYING
BACK SCENES REPEATEDLY (REPEAT PLAY),
p. 133).
1
CHANGING TITLE OF PROGRAMME (TITLE)
The recording date/time has initially been attached to any programme.
You can change the recording date/time to any desired title.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Choose “Title” on the “Program” menu
screen, and then press the A button.
4 Select the programme
whose title you want to
change, and then press
the A button.
The screen for setting a
title will appear.
P r og r am T i t l e
01
02
03
3 0 / 8 / 2005
10 / 9 / 2005
30 / 9 / 2005
ENTER
5 Use f/e/d/c
to select a letter, and
then press the A
button: The selected
letter will be entered.
Title input bar
TITLE 30/ 9/ 2005
1 2 3 4 5 6 7 8 9 0 SPACE
A B C D E F G H I J K L M
N O P Q R S T U VWX Y Z
À È Ì Ò Ù Á É Í Ó Ú Ã Ñ Õ
Â Ê Î Ô Û Ä Ë Ï Ö Ü Ç
1
Cancel
En t er
INPUT DELETE SEL SELECT
Repeat this procedure
to create a title.
Up to 20 characters can Input mode
be input.
Palette for selecting
characters
RETURN
119
English
6 After entering the title,
choose “Enter” and
then press the A
button.
7 The screen for verifying
the change in title will
appear: Choose “YES”,
and then press the A
button.
T I T L E a t a Pa r k
1 2 3 4 5 6 7 8 9 0 SPACE
a b c d e f g h i j k l m
n o p q r s t u v w x y z
à è ì ò ù á é í ó ú ã ñ õ
â ê î ô û ä ë ï ö ü ç ß
2
En t er
Cancel
ENTER DELETE SEL SELECT
●Characters available for entering
title
You can use the SELECT button to select
characters from the “capital letter”, “small
letter” and “symbol” input modes.
With step 5, select the input mode and then
press the A button, or press the DISPLAY
button.
T I T L E a t a Pa r k
F i n i s h t i t l e s e t t i ng?
YES
NO
ENTER
Choose “NO” to cancel
changing of the title.
After Yes or No setting, the Disc Navigation
screen of the selected programme will appear.
TITLE 30/
1 2 3 4 5
A B C D E
N O P Q R
À È Ì Ò Ù
Â Ê Î Ô Û
1
CHANGE
9/ 2005
6 7 8 9 0 SPACE
F G H I J K L M
S T U VWX Y Z
Á É Í Ó Ú Ã Ñ Õ
Ä Ë Ï Ö Ü Ç
En t er
Cancel
DELETE SEL SELECT
TITLE 30/
1 2 3 4 5
a b c d e
n o p q r
à è ì ò ù
â ê î ô û
2
CHANGE
9/ 2005
6 7 8 9 0 SPACE
f g h i j k l m
s t u v w x y z
á é í ó ú ã ñ õ
ä ë ï ö ü ç ß
En t er
Cancel
DELETE SEL SELECT
Input mode
Note:
• If you wish to delete the letter for title, press the C
button once: The input letter will be deleted. Holding
down the C button will delete all letters in the TITLE
column.
• You can also use the DELETE button on remote
control to delete any input letters.
• Pressing the SELECT button on the title setting
screen (in step 5) will change the cursor position from
the title input bar to character select palette, input
mode number, and then to “Cancel”. You can also use
f/e/d/c to move the cursor up/down and to
the left/right and change its position.
• To cancel the setting of title, choose “NO” on the
screen for verifying the entered title: The screen for
verifying cancellation of title setting will appear. To
cancel title setting, choose “YES”.
• If you press the C button on the screen for verifying
change in title, the title setting screen will be restored.
• Double byte characters set on other devices may be
displayed blank on this DVD video camera/recorder.
• Titles set on this DVD video camera/recorder may not
be visible on other devices.
120
TITLE 30/ 9/ 2005
1 2 3 4 5 6 7 8 9 0 SPACE
3
CHANGE
En t er
DELETE
Cancel
SEL SELECT
English
1
Play List
WHAT IS “PLAY LIST”?
You can create a play list on this DVD video camera/recorder by gathering your favourites from the
recorded scenes.
Since the play list is not created by copying data, you will consume little of the disc capacity by
making a play list. On the other hand, deleting scenes on play list will not increase the remaining
disc capacity for recording.
Example:
Programme 1
Programme 2
Play list 1 created
Play list of up to No. 99 can be created, and up to 999 scenes can be included in each play list of No. 1
to No. 99.
1
CREATING NEW PLAY LIST (CREATE)
1 Press the DISC NAVIGATION button.
2 Select the scenes to be programmed in a play
list.
3 Press the MENU button.
4 Use “Operating Menu”
(p. 67) to choose
“Create” on the
“PlayList” menu screen,
and then press the A
button.
6 When creation of a play list is complete, the
Disc Navigation screen will appear.
P l ayL i s t
Sw i t c h
P l ay
Creat e
Ed i t
Title
ETC
De l e t e
ENTER RETURN
RAM
5 The scene select screen
will appear: If the
selected scenes on the
play list are the ones
you want, press the
A button.
With the created play list, you can also add
scenes recorded on another day or delete
unnecessary scenes afterwards.
C r ea t e P l a yL i s t
ENTER
DESEL ECT ALL
0 04 / 0 1 9
RAM
If you want to change the scenes with which
you want to create a play list, you can change
them on this screen.
Note:
• You can also select multiple scenes (p. 103).
• If the added scene had skip or fade setting, that
information will also be added to the play list.
• The date/time when a play list was created will appear
as the title for the play list. This title can later be
changed (p. 127).
• If free space available on disc is insufficient, creation
of new play list may not be possible: Delete
unnecessary scenes.
• Only the data on scenes is recorded on play list: If
you create or delete play lists, the original scenes
in programmes will not be erased.
Editing scenes on play list will not affect the scenes in
programmes.
• If you press the MENU button before pressing A in
step 5, the submenu will appear (see page 108).
121
1
English
SWITCHING TO DISPLAY OF EACH PLAY LIST (SWITCH)
Select the desired one of multiple play lists: The Disc Navigation screen of the selected play list will
appear.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose
“Switch” on the
“PlayList” menu
screen, and then press
the A button.
PlayL i s t
Sw i t c h
Play
Create
Ed i t
Ti t le
ETC
Del e te
ENTER RETURN
4 Use the “Switch
Playlist” screen to select
the play list you wish to
display, and then press
the A button.
RAM
PLAY
RAM
Sw i t c h P l a y L i s t
All
01 30 /
0 2 10 /
0 3 12 /
ENTER
0 1 3 0 / 8 / 2005 1 2 : . . 0 01 / 008
The Disc Navigation
screen of the selected play list will be
displayed.
Note:
To display the Disc Navigation screen showing all
programmes (all recorded scenes), choose “All
Programs” on the “Switch PlayList” screen.
Pr og r ams
8 / 2005 1 2 : 30
9 / 2005 8 : 0 0
9 / 2005 9 : 3 0
RETURN
●Editing on play list
When making settings on play list, such as
changing title, setting skip, adding fade, etc., use
the same procedure for setting on programme or
scenes. Perform these settings, referring to the
following reference pages:
Deleting scene,
Changing thumbnail,
Setting skip,
Adding fade,
Combining scenes,
Dividing a scene,
Copying to card,
Changing title,
Arranging order of scenes
(only on play list)
p. 107
p. 113
p. 112
p. 111
p. 110
p. 109
p. 114
p. 119, 127
p. 126
1
PLAYING BACK A PLAY LIST (PLAY)
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose “Play”
on the “PlayList” menu
screen, and then press
the A button.
PlayL i s t
Sw i t c h
Play
Create
Ed i t
Ti t le
ETC
Del e te
ENTER RETURN
S t a r t P layL i s t
01 30 /
0 2 10 /
0 3 12 /
0 4 20 /
ENTER
122
8 / 2005 1 2 : 30
9 / 2005 8 : 0 0
9 / 2005 9 : 3 0
9 / 2005 15 : 1 5
RETURN
4 Use the “Start Playlist”
screen to select the play
list to be played back,
and then press the A
button.
RAM
12 : 30
30 / 8 / 20 0 5
The selected play list
will be played back from the first scene. To
cancel playback midway, press the C button:
The Disc navigation screen of the play list
being played back will appear.
Note:
If “Repeat Play On” is specified, the play list will be
repeatedly played back (see page 133).
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose “Edit”
on the “PlayList” menu
screen, and then press
the A button.
4 Use the play list select
screen to select the play
list to which you wish
to add scenes, and then
press the A button.
The scenes of the
programme that was
displayed in step 1 will
appear in the upper
row, and the scenes of
selected play list will
appear in the lower
row.
Note:
If the DISPLAY button is
pressed when the
thumbnails are displayed,
the recording date/time of
the selected scene will
appear across the bottom
of screen. Press DISPLAY
button again to restore the
previous screen.
5 Press the e button to move the cursor to the
lower row, and press the d or c button to
select the point where the scene is to be
inserted.
PlayL i s t
Sw i t c h
Play
Create
Ed i t
Ti t le
ETC
Del e te
ENTER RETURN
Ed i t P l a yL i s t
A l l P r o g r ams
Scene to be added
P l a yL i s t N o . 0 1
008/008
Insertion position
RAM
ADD
Ed i t P l a y L i s t
01 30 /
0 2 10 /
0 3 12 /
0 4 20 /
ENTER
004/014
EX I T
*1 *2
8 / 2005 1 2 : 30
9 / 2005 8 : 0 0
9 / 2005 9 : 3 0
9 / 2005 15 : 1 5
RETURN
*1: Number of scene before insertion position cursor
*2: Number of all scenes on play list
6 Press the f button to move the cursor to the
upper row, and press the d or c button to
point the cursor to the scene to be added.
Ed i t P l a yL i s t
A l l P r o g r ams
P l a yL i s t N o . 0 1
ADD
004/014
007/007
EX I T
7 Press the A button to copy the scene.
After adding scenes is completed, the edited
play list will appear.
Repeat steps 5 – 7 to add other scenes.
8 Press the C button: The screen for verifying
Ed i t P l a yL i s t
A l l P r o g r ams
P l a yL i s t N o . 0 1
exit will appear.
004/014
008/008
3 0 / 8 / 2 0 0 5 1 2 : 30 : 0 0
Recording date/time
Note:
• The cursor shows the position where the scene is to
be added.
• You can also select multiple scenes (p. 103).
• Pressing C in the middle of adding scenes will display
the screen for verifying an exit from “Edit PlayList”.
Choose “YES” to exit the edition of play list. Choosing
“NO” will restore the “Edit PlayList” screen.
• If you press the MENU button in step 5 or 6, the
submenu screen for editing play list will appear. You
can also use this submenu to add scenes (see
page 108).
123
English
1
ADDING SCENES TO PLAY LIST (EDITING PLAY LIST)
1
English
DELETING SCENES FROM PLAY LIST (EDITING PLAY LIST)
1 Press the DISC NAVIGATION button.
2 Display the editing screen of the play list to
be edited.
play list in lower row,
and place the cursor on
the scene to be deleted.
Ed i t P l a yL i s t
A l l P r o g r ams
P l a yL i s t N o . 0 2
DELETE
Repeat steps 3 and 4 to
delete other scenes.
5 Press the C button: The
Perform steps 2 – 4 on page 123.
3 Move the cursor to the
4 Press the A button.
Ed i t P l a yL i s t
A l l P r o g r ams
P l a yL i s t No . 02
DELETE
004/014
007/007
EX I T
screen for verifying exit
will appear.
004/014
008/008
EX I T
Note:
• You can also select multiple scenes (p. 103).
• Place the cursor on scene to be deleted, and then
press the DELETE button on remote control: You can
also delete the scene on the play list.
1
ADDING SCENES USING SUBMENU FOR EDITING (EDITING PLAY LIST)
You can use the menu screen to add scenes to a play list.
1 Press the DISC NAVIGATION button.
2 Display the editing screen of the play list to
5 Press the MENU button.
6 Choose “Add”, and
then press the A
button.
be edited.
Perform steps 2 – 4 on page 123.
3 From the play list in lower row, select the
position where you wish to insert a scene.
4 Select the scenes to be added from the upper
row.
Ed i t P l a yL i s t
A l l P r o g r ams
P l a yL i s t No . 0 3
Repeat steps 3 – 6 to
add other scenes.
ENTER
004/014
007/007
RETURN
7 Press the C button: The
screen for verifying exit
will appear.
Ed i t P l a yL i s t
A l l P r o g r ams
P l a yL i s t No . 03
004/014
008/008
004/014
Scene to be added
P l a yL i s t No . 03
Ed i t
A l l Add
P r o g r a ms
Ex i t
ADD
EX I T
007/007
Insertion position
ADD
124
EX I T
Note:
• The selected scenes will be added in the insertion
position.
• You can also select multiple scenes (p. 103).
You can delete scenes from play list on the editing screen.
1 Press the DISC NAVIGATION button.
2 Display the editing screen of the play list to
be edited.
Perform steps 2 – 4 on page 123.
3 Move the cursor to the
play list in lower row.
5 Choose “Delete” on the
“Edit” menu screen,
and then press the A
button.
Repeat steps 3 – 5 other
scenes can be deleted.
Ed i t P l a yL i s t
A l l P r o g r a ms
001/014
Ed i t
A l l De
P r ol ge rt ams
e
Ex i t
001/014
P l a yL i s t No . 0 4
ENTER
007/007
RETURN
6 Press the C button: The screen for verifying
exit will appear.
P l a yL i s t No . 0 4
DELETE
007/007
EX I T
4 Select the scene to be deleted, and then press
Note:
• If all scenes on play list are deleted, the play list itself
will also be deleted.
• You can also select multiple scenes (p. 103).
the MENU button.
1
SELECTING SCENES USING SUBMENU FOR EDITING (EDITING PLAY
LIST)
You can specify the range of scenes when adding or deleting consecutive multiple scenes to/from
play list. This “Select” menu item is useful when selecting consecutive multiple scenes in items for
adding or deleting scenes using menu on page 116.
1 Press the DISC NAVIGATION button.
2 Display the editing
screen of the play list to
be edited.
Ed i t P l a yL i s t
A l l P r o g r ams
P l a yL i s t No . 04
Perform steps 2 – 4 on
page 123.
ADD
4 Use “Operating Menu”
004/014
007/007
(p. 67) to choose “Start
→ Current”, “Current
→ End”, “All” on the
“Select” menu screen,
and then press the A
button.
Se l ect
A l l P r o g r ams
S t a r t – Cu r r en t
Cu r r en t – End
P l a yLA il sl t No. 0 3
ENTER
001/014
007/007
RETURN
EX I T
3 Specify the first or last scene of those you
wish to select, and then press the MENU
button.
To select all scenes, simply press the MENU
button.
Note:
See page 116 for the status of scenes to be
selected.
5 Press the C button: The screen for verifying
exit will appear.
125
English
1
DELETING SCENES USING SUBMENU FOR EDITING (EDITING PLAY LIST)
1
English
ARRANGING ORDER OF SCENES (MOVE)
You can move scenes only when “Category: All” is specified.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu” (p. 67) to choose
9 The screen for verifying
move will appear:
Choose “YES”, and then
press the A button.
“Switch” on the “PlayList” menu screen, and
then press the A button.
Select the play list to be edited, and then press
the A button.
4 Select the scene to be moved.
“Move”, and then press
the A button.
7 The “Move Scenes”
Sc ene
Ed i t
E f f ec t
Copy
Se l e c t
De t a i l
D i v i de
De l e t e
Comb i n e
Mo v e
ETC
ENTER RETURN
screen will appear: If
you are sure you want
to move the scene, press the A button.
RAM
If you want to change the scene selected in
step 4, you can do it on this screen.
8 Move the “ ” mark to
the position where you
wish to move the scene,
and then press the A
button.
Se l e c t I n s e r t P o i n t
ENTER
126
Move sc e n e s?
YES
NO
ENTER
Choose “NO” to cancel
move.
After Yes or No setting, the scene select screen
will be restored.
Repeat steps 7 – 9 to move another scene.
10Press the C button to quit.
You can also select multiple scenes (see pages
103 and 116).
5 Press the MENU button.
6 Choose “Scene”, “Edit”,
Move Scene
RETURN
0 06 / 0 1 9
RAM
Note:
• If you press the MENU button before pressing the
A button in step 7, the submenu screen will appear
(p. 108).
• Only scenes on play list can be moved.
The play lists have serial numbers in the order you have created them, along with the created dates/
times: You can change this title at any time.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu” (p. 67) to choose
“Title” on the “PlayList” menu screen, and
then press the A button.
4 Use the “Playlist Title” screen to select the
play list whose title you wish to change, and
then press the A button.
See “CHANGING
TITLE OF
PROGRAMME
(TITLE)” on page 119
for how to enter a title.
P layL i s t Ti t l e
01 30 /
0 2 10 /
0 3 12 /
0 4 20 /
ENTER
8 / 2005 1 2 : 30
9 / 2005 8 : 0 0
9 / 2005 9 : 3 0
9 / 2005 15 : 1 5
RETURN
5 The screen for verifying
exit will appear: Choose
“YES” and then press
the A button.
T I T L E a t a Pa r k
F i n i s h t i t l e s e t t i ng?
YES
NO
ENTER
6 Press the C button to
quit.
After changing the title,
the Disc Navigation
screen on the play list
whose title has been
changed will appear.
0 1 a t a Pa r k
0 01 / 008
RAM
PLAY
Note:
The registered title can be changed at any time using
the same procedure.
1
DELETING PLAY LIST (DELETE)
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu” (p. 67) to choose
“Delete” on the “PlayList” menu screen, and
then press the A button.
4 Use the “Delete
Playlist” screen to select
the play list you wish to
delete, and then press
the A button.
De l e t e P l a y L i s t
01 30 /
0 2 10 /
0 3 12 /
0 4 20 /
ENTER
8 / 2005 1 2 : 30
9 / 2005 8 : 0 0
9 / 2005 9 : 3 0
9 / 2005 15 : 1 5
RETURN
5 The screen for verifying deletion will appear:
Choose “YES”, and then press the A
button.
Choose “NO” to cancel deletion.
After Yes or No setting, the Disc Navigation
screen of all programmes will be restored.
Note:
• Even if you delete a play list, the original scenes
stored on disc will not be deleted.
• If any play list is deleted, the number of play lists will
automatically be revised. (For example, if the No. 2
play list is deleted, the No. 3 play list will become No.
2 play list.)
De l e t e P l a y L i s t
P l a y L i s t No. 01
30 / 8 / 2005 1 2 : 30
De l e t e P l a y L i s t ?
YES
NO
ENTER
127
English
1
CHANGING TITLE OF PLAY LIST (TITLE)
123
English
Go To
From the Disc Navigation screen, you can jump to the first scene or last scene.
TOP (END)
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose “Top”
or “End” on the “Go
To” menu screen, and
then press the A
button.
Go T o
To p
En d
ETC
ENTER
RETURN
A l l Pr ogr ams
PLAY
RAM
014 / 014
RAM
(When “End” is specified)
128
13
INITIALISING DISC OR CARD (FORMAT DISC. FORMAT CARD)
Initialising DVD-RAM disc or card will allow you to delete any recorded contents.
Before You Begin
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialisation. If the DVD video camera/recorder is turned off
during initialisation and the initialisation is interrupted, incorrect
initialisation will result and the incorrectly initialised disc will be
unusable.
• If you use a brand-new DVD-R disc, message “Disc is not formatted”
will appear: Initialise the disc, following the subsequent messages
(p. 49).
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu” (p. 67) to choose
“Format Disc” or “Format Card” on the
“Disc” or “Card” menu screen, and then press
the A button.
The screen for verifying “Format Disc” or
“Format Card” will appear.
4 Choose “YES”, and then press the A
button.
Choose “NO” to cancel initialisation.
F o rma t Ca r d
F o rma t D i s c
A l l data wi l l be deleted.
F o rma t t h e d i s c now ?
YES
Note:
• If you wish to delete all recorded contents, it is
recommended that you use initialisation, which will
delete all the scenes in much less time than using the
scene delete function.
• Initialisation will delete all the recorded contents on
disc or card: Be careful not to delete data by mistake.
• It may not be possible to initialise a disc with many
scratches or dirt: Such a disc cannot be used (p. 29).
• This DVD video camera/recorder may not recognise
some discs or cards that have been initialised on PC
or a device other than this DVD video camera/
recorder.
• If you attempt to initialise a disc or card in this DVD
video camera/recorder when it is connected to PC via
PC connection cable, the disc or card may not be
initialised and may be unusable on this DVD video
camera/recorder (for DZ-GX20E, DZ-MV780E or DZMV750E only).
A l l data wi l l be deleted.
F o rma t t h e ca r d now ?
YES
NO
ENTER
(When using
DVD-RAM disc)
NO
ENTER
(When using card)
129
English
Disc or Card Management
1
English
PROTECTING DISC FROM WRITING (PROTECT DISC)
You can protect a DVD-RAM disc in order to prevent recorded images from being erased or edited
by mistake. Further recording will not be possible on protected disc until the protection is released.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose
“Protect Disc” on the
“Disc” menu screen,
and then press the A
button.
4 The screen for
verifying protection
will appear:
Choose “YES”, and
then press the A
button.
Disc
Fo rma t D i s c
P r o t e c t D i sc
Ca pac i t y
ETC
Upd a t e Con t r o l I n f o .
RAM
ENTER RETURN
Protect Disc
Write protect disc?
YES
NO
Choose “NO” to
cancel protection.
After “YES” or “NO”
setting, the Disc
Navigation screen will
be restored.
A l l Pr og r ams
0 01 / 019
RAM
PLAY
Disc protect icon
Note:
• To release disc protection, perform the same
procedure as above: The screen for verifying the
release of protection will appear.
Choose “YES” to release the protection.
• If disc protection has been engaged on another
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection.
ENTER
123
VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)
You can find out how long you will be able to record on one side of disc or on card.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu” (p. 67) to choose
“Capacity” on the “Disc” or “Card” menu
screen, and then press the A button.
(When using disc)
*1
*2
Cap a c i t y
Approx.
V I DEO( XTRA) : 17m i n
V I DEO( F I NE) : 26m i n
V I DEO( STD) : 54m i n
PHOTO
: 996
Cap a c i t y
: 9 0%
RETURN
(When using card)
Cap a c i t y
Approx.
PHOTO( FINE) : 4 6 2
PHOTO( NORM) : 9 2 4
PHOTO( ECO) : 1 8 4 8
Cap a c i t y
: 9 6%
RETURN
*1 With DVD-R disc: The quality mode first used for
recording with disc will appear.
*2 With DVD-R disc: This will not be displayed.
130
4 Press the C button to quit.
The Disc Navigation screen will be restored.
Note:
With a write-protected disc (see “Terminology”, p. 152)
or locked card, the remaining space will always be
displayed as “0”.
English
1
UPDATING CONTROL INFORMATION OF DVD-RAM DISC
(UPDATE CONTROL INFO.)
Disc Navigation in this DVD video camera/recorder handles information on scenes, such as
thumbnail, skip, fade, in a particular manner. If you use another device to edit a disc recorded on this
DVD video camera/recorder, and then use the data again with Disc Navigation in this DVD video
camera/recorder, the Disc Navigation may not appear normally. If this happens, use the Update
Control Info function to update the data.
Before You Begin
• When using the AC adapter/charger to power the DVD video camera/
recorder for updating control information, make sure that power is not
turned off during updating: If the DVD video camera/recorder is turned
off during updating and the updating is interrupted, the control
information will not be updated correctly.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu” (p. 67) to choose
“Update Control Info.” on the “Disc” menu
screen, and then press the A button.
Note:
• It may take time to update the control information if
the disc has many recorded scenes.
• Even if control information is updated, some discs will
be unusable on Disc Navigation of this DVD video
camera/recorder.
The screen for verifying “Update Control
Info.” will appear.
4 Choose “YES”, and then
press the A button.
Upda te Con t r o l I n f o.
Upda te Con t r o l I n f o?
The message for
YES
NO
proceeding will appear,
ENTER
and then the Disc
Navigation menu
screen will be restored.
A black screen may appear while the message
for updating is displayed.
Choose “NO” to cancel updating.
131
2
English
FINALISING DVD-R DISC (FINALIZE DISC)
Before You Begin
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder when finalising a DVD-R disc. Finalisation cannot be executed
using a battery. If the DVD video camera/recorder is turned off during
finalisation and the finalisation is interrupted, incorrect finalisation will
result, and at worst, the disc may be damaged.
If you want to play back a DVD-R disc recorded on this DVD video camera/recorder, using a
device conforming to 8 cm DVD disc – such as a DVD player, etc. – you must finalise the disc on
this DVD video camera/recorder. (See “Terminology”, p. 152)
The date of programme will appear on the menu screen of DVD player as a title.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu” (p. 67) to choose
5 When finalisation is complete, the Disc
Navigation screen of all programmes will
appear.
SELECT I TEM
“Finalize Disc” on the “Disc” menu screen,
and then press the A button.
The disc will be finalised.
4 Choose “YES”, and then
press the A button.
PREV
001 / 010
06: 3 / 11/2005
07: 2 3 / 11/2005
08: 3 0 / 11/2005
0 9 : 3 / 12/2005
1 0 : 1 0 / 12/2005
NEXT
END
(Screen when viewed on DVD player)
Finalize Disc
ENTER
*
* Will vary depending
on the recording
time.
132
1 0 / 9/2005
1 5 / 9/2005
1 8 / 9/2005
8 / 1 0/2005
1 0 / 1 0/2005
TOP
Further recording on this
disc will be impossible.
Finalize? (Apporox. 23min.)
YES
NO
The message showing
that the disc is being
finalised will appear,
and the disc will then be
finalised.
will appear on the
Disc Navigation screen
for a finalised disc.
01:
02:
03:
04:
05:
A l l Pr og r ams
0 01/ 015
PLAY
Finalised DVD-R disc
Note:
• Do not finalise a disc recorded on this DVD video
camera/recorder using any other device.
• No recording can be done on any DVD-R disc that
has been finalised.
• If the disc in the DVD video camera/recorder has
already been finalised, you cannot choose “Finalize
Disc”.
• The time required to finalise disc that appears on the
“Finalize Disc” screen is only for reference.
• The shorter the recording time on disc, the longer it
will take to finalise it.
English
1
Others
DISPLAYING MOVIES OR STILLS INDEPENDENTLY (CATEGORY)
Scenes recorded on this DVD video camera/recorder will be displayed in the order of recording
regardless of whether they are movies or stills. You can use the Disc Navigation screen to switch this
display to stills only or movies only.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose
“Category” on the
“Others” menu screen,
and then press the A
button.
4 Specify the desired
option for display, and
then press the A
button.
Others
Category
Repeat Play
ENTER RETURN
A l l Pr og r ams
0 06 / 015
RAM
PLAY
Al l
V I DEO
PHOTO
RAM
(When “PHOTO” is
specified)
All:
To display all scenes, movies or stills,
in the order of recording.
VIDEO: To display only movies in the order of
recording.
PHOTO: To display only photos in the order of
recording.
When the Disc Navigation screen is finished,
“Category: All” will be restored.
12
PLAYING BACK SCENES REPEATEDLY (REPEAT PLAY)
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose
“Repeat Play” on the
“Others” menu screen,
and then press the A
button.
●When Repeat Play is set:
If one scene has been specified: When playback
of the last scene is finished, playback of all
scenes will repeat from the first scene.
If the range for playback has been specified:
Playback of the scenes in that range will repeat.
Others
Category
Repeat Play
ENTER RETURN
●To release Repeat Play
On
Of f
RAM
4 Choose “On”, and then press the A button:
Playback will start.
Choose “Off” to cancel Repeat Play setting.
Use one of the following 3 methods to release:
• Choose “Off” in step 4 above.
• Turn the DVD video camera/recorder off
once.
• Press the DISC EJECT button to remove the
disc.
Note:
• Press the C button to terminate playback. However,
the Repeat Play setting will not be cancelled.
• Still images can also be played back repeatedly.
• Repeat playback will not function when playback is
instructed from the recording pause status.
133
3
English
SLIDE SHOW (CONTINUOUS PLAYBACK OF STILLS)
If you play back stills recorded on a card, the DVD video camera/recorder will enter the playback
pause status after each still is played back.
Setting Slide Show allows you to continuously play back stills.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use “Operating Menu”
(p. 67) to choose “Slide
Show”, “Start”, and
then press the A
button.
Slide Show
Start
ENTER
Start:
RETURN
To start a slide show
When playback is finished, the DVD video
camera/recorder will enter the playback
pause status at the final still.
Pressing the C button will restore the Disc
Navigation screen.
134
Note:
• One still is played for approx. 5 seconds.
• With slide show, playback will start from the first photo
on card regardless of the position of cursor.
• If you press the C button or turn the DVD video
camera/recorder off, Slide Show will be cancelled.
(DZ-GX20E/MV780E/MV750E)
English
Connecting to PC
Connecting to PC
THE FOLLOWING ARE AVAILABLE WHEN CONNECTING TO PC
Use the provided PC connection cable to connect this DVD video camera/recorder to your PC in
which the software on the CD-ROM provided or generally available software is installed: The videos
and photos recorded on the DVD video camera/recorder can be used on the PC.
●Using, on PC, the photos recorded on DVD-RAM disc or card in this DVD
video camera/recorder:
Original disc
Application used
DVD-RAM disc or card recorded on
this DVD video camera/recorder
Application on which JPEG files can be used
• Open the DCIM\100*HPNX1 folder of DVD-RAM disc or card.
●Viewing, on PC, DVD-RAM disc recorded on this DVD video camera/
recorder:
Original disc
Application used
DVD-RAM disc recorded on this DVD DVD-MovieAlbumSE** or generally available playback software
video camera/recorder
conforming to DVD video recording (DVD-VR) format (see
“Terminology”, p. 152)
Example: PowerDVD produced by CyberLink
●Viewing, on PC, DVD-R disc recorded on this DVD video camera/
recorder:
Original disc
Application used
DVD-R disc recorded and finalised on Generally available playback software compatible with DVD video
this DVD video camera/recorder
(see “Terminology”, p. 152)
Example: PowerDVD produced by CyberLink
●Copying contents on DVD-RAM disc recorded on this DVD video camera/
recorder to another DVD-RAM disc using PC:
Original disc
Written media
DVD-RAM disc recorded
Another DVD-RAM disc
on this DVD video camera/
recorder
Application used
DVD-MovieAlbum copy tool**
• Copy the data to hard disk of PC, and then
write the data to another DVD-RAM disc.
• Copying in programme units is also possible.
135
English
●Using PC to edit images on DVD-RAM disc recorded on this DVD video
camera/recorder:
Original disc
Written disc
Application used
DVD-RAM disc recorded
Original DVD-RAM disc or DVD-MovieAlbumSE**
on this DVD video camera/ another DVD-RAM disc
recorder
●Using PC to edit images on DVD-RAM disc recorded on this DVD video
camera/recorder and create a DVD video (DVD-R disc) (see page 144):
Original disc
Written disc
DVD-RAM disc recorded
Blank DVD-R disc
on this DVD video camera/
recorder
Application used
• DVD-MovieAlbumSE**
• DVDfunSTUDIO**
●Capturing into PC, the images on DVD-RAM disc recorded on this DVD
video camera/recorder (see page 144):
Original disc
Application used
DVD-RAM disc recorded on this DVD • DVD-MovieAlbumSE**
video camera/recorder
• DVD-MovieAlbumSE copy tool**
* The number may be different when recording was made on a device conforming to DCF.
** Software stored on the provided CD-ROM
Note:
Images recorded on DVD-R disc cannot be edited on the software provided with this DVD video camera/recorder.
Languages compatible with each software programme:
• DVD-MovieAlbumSE, DVDfunSTUDIO and UDF driver (DVD-RAM driver) can handle Japanese,
English, German, French, Spanish, Italian and Chinese (simplified).
• 3D-TitleSTUDIO provided with DVD-MovieAlbumSE can handle Japanese and English.
• When installing the provided software, the language on your Windows® will automatically be
installed: If your Windows® is run on a language other than the above, the English version will be
installed.
136
The CD-ROM supplied with the DVD video camera/recorder contains the following folders:
To refer to the contents of CD-ROM, set the CD-ROM in the CD-ROM drive of PC, right-click the CDROM icon and choose “Open”.
Contains the DVD-MovieAlbumSE (see page 140 for
installation).
You can use DVD-MovieAlbumSE to edit the images recorded
on DVD-RAM disc and create a 3D title.
Contains the DVDfunSTUDIO (see page 141 for installation).
You can use DVDfunSTUDIO to create a DVD-Video disc from
movies edited on DVD-MovieAlbumSE.
Contains the UDF driver (see page 141 for installation).
Install this driver if you wish to use JPEG stills recorded on
DVD-RAM disc, on your PC.
Contains the Acrobat Reader (see page 138 for installation).
If Acrobat Reader is not installed in your PC, you will need to
install it in order to open the on-line manuals (instruction
manual files) for DVD-MovieAlbumSE and UDF driver.
Although the CD-ROM may contain a folder or file other than the above, they will not be needed on this
DVD video camera/recorder unless some special instruction is given.
137
English
Contents on Provided CD-ROM
English
Read the electronic instruction manuals on PC for complete information on using each software
programme.
●DVD-MovieAlbumSE
●DVDfunSTUDIO
You can read the instruction manual using either
of the following procedures:
• Open the PDF file in
DVDMASE 4\manuals\English folder
contained on the provided CD-ROM.
• After installing DVD-MovieAlbumSE, open
“Programs”or “All Programs” from the
Windows “Start” menu, choose “Hitachi
DVDCAM” and “DVD-MovieAlbumSE”, and
then open “Instruction Manual”.
• After installing DVDfunSTUDIO, open
“Programs” or “All Programs” from the
Windows “Start” menu, choose “Hitachi
DVDCAM” and “DVDfunSTUDIO”, and then
open the electronic instruction manual in
“Document” folder.
To read the above manual, you will need Adobe
Acrobat Reader.
If Adobe Acrobat Reader has not been installed
in your PC, start AcrobatReader\English
\AR500ENU.exe on the provided CD-ROM to
install it.
●UDF driver (DVD-RAM driver)
• After installing the UDF driver (DVD-RAM
driver), open “Programs” or “All Programs”
from the Windows “Start” menu, choose
“DVD-RAM” and “DVD-RAM Driver”, and
then open “How to use DVD-RAM disc”.
●Requirements of available PC
•
•
•
•
•
•
•
•
•
•
The provided software cannot be used on Windows® 98 or Windows® 98 Second Edition.
OS: Windows® Me / 2000 Professional / XP
Computer: IBM PC/AT compatible
CPU: Intel® Pentium® III 800 MHz or higher (Pentium® 4 1.8 GHz or higher is recommended)
Operation with Pentium compatible CPU other than those produced by Intel®/AMD® may not be
supported.
Memory: At least 256 MB (512 MB or more is recommended)
Free space on hard disk: At least 400 MB (does not include capacity needed to copy or edit video or
photo data)
CD-ROM drive (used to install software)
Display adapter (video memory of at least 4 MB) and display that can display at least 1024 × 768
pixels and 65,536 colours (16-bit colours), and is compatible with DirectX® 8.1 or higher.
DirectSound® compatible sound card
USB: One unused port is necessary for this product (USB2.0 port is recommended)
Note:
• Operation is not guaranteed in the following cases:
- Using PC with OS other than Windows® Me / 2000 Professional / XP installed
- When operated on Pentium® compatible CPU other than those produced by Intel® or AMD®
- When connected via USB hub
• Multiprocessor is not supported.
• Even when your PC satisfies the above conditions of available PC, malfunction may result or restriction in use
may occur, depending on the combination of other software in PC or peripheral devices.
138
English
Installing Software
Before You Begin
Before installing the UDF driver (DVD-RAM driver) provided with this DVD video camera/
recorder, check to see if another UDF driver* has already been installed in your PC.
*InstantWrite® provided with the DZ-WINPC1, DZ-WINPC2 or DZ-WINPC2B PC kit for the Hitachi
DZ-MV100E DVD video camera/recorder, or with the DZ-WINPC3 PC editing kit for the Hitachi
DZ-MV200E, DZ-MV230E or DZ-MV270E DVD video camera/recorder.
If the UDF driver has been installed, uninstall it and then install the UDF driver on the provided CDROM. Use “Control Panel” – “Add or Remove Programs” or “Add or Remove Applications” to
uninstall the UDF driver.
If any question messages appear that mean “This file is not used on another application. Do you
wish to delete it together?” during uninstalling, click “No” for all such questions.
Note:
• If your PC uses Windows® XP or 2000 Professional, set the user name to “Administrator (computer’s manager)”
(or user name with equivalent authorisation), log on to PC, and then install the software (if you do not have
authorisation, consult your system manager).
• For the software provided with this DVD video camera/recorder, no programme with different version can coexist:
If any programmes with different versions are already installed in your PC, uninstall them, and then install the
software from the provided CD-ROM. However, installing the provided software may disable some functions that
were usable on the previously installed software programmes with different versions.
DISPLAYING INSTALLER SCREEN
1 Turn the PC on.
If any software is being run on the PC,
terminate all the programmes being used.
2 Insert the provided CD-ROM into the CDROM drive of PC.
The installer screen will automatically appear.
If the installer screen does not automatically
appear, use the following procedure to
display it:
3 Use the Windows My Computer or Explorer
to open the drive in which the CD-ROM is
located.
4 Double-click the Setup.exe icon.
The “.exe” extension may not appear,
depending on the PC being used.
139
English
INSTALLING SOFTWARE
1 Click “All” on the installer screen.
Clicking “All” allows you to install the DVDRAM driver, DVD-MovieAlbumSE 4.1 and
DVDfunSTUDIO 2.2 all at one time.
If any of the software programmes are
already installed, uninstall them, and then
proceed with installing the provided
programmes.
4 If you do not wish to change the folder in
which DVD-MovieAlbumSE is installed, click
“Next”.
If you wish to change the folder, click
“Change”, and then choose the folder in
which DVD-MovieAlbumSE is to be installed.
2 The screen for installing DVDMovieAlbumSE will appear: Click “Next”.
Click
5 Click “Install”.
Installation will start.
Click
3 Choose your TV broadcast system, and then
click “Next”.
Click
Confirm
140
Click
is to be created on desktop will appear: If you
want to create one, click “Yes”.
If not, choose “No”.
10 Click “Install”.
Installation will start.
11 A message verifying whether a shortcut icon
is to be created on desktop will appear: If you
want to create one, click “Yes”.
If not, choose “No”.
12 Click “Finish”.
Then the installation of DVD-RAM driver
will start.
7 Click “Finish”.
Then the installation of DVDfunSTUDIO will
start.
13 After the DVD-RAM driver has been
installed, a message that prompts you to
restart the PC will appear: Click “OK”.
Click
14 The driver setup screen will appear: Click the
Click
“Driver and Formatter Setup” button.
8 The screen for installing DVDfunSTUDIO
will appear: Click “Next”.
9 If you do not wish to change the folder in
which DVDfunSTUDIO is installed, click
“Next”.
If you wish to change the folder, click
“Change”, and then choose the folder in
which DVDfunSTUDIO is to be installed.
Click
141
English
6 A message verifying whether a shortcut icon
English
15 Click “Next”.
17 If you do not wish to change the folder in
which the UDF driver is installed, click
“Next”.
Click
16 Carefully read the Licence Agreement: If you
accept it, click “Yes”.
Click
18 If you do not wish to change the folder name,
The contents of agreement displayed on
actual screen may be different from those in
the figure.
click “Next”.
Confirm
Click
142
Click
“Next”.
21 If your PC uses Windows® XP/Me, a
message that prompts you to restart will
appear: Click “Finish” and then restart the
PC.
Installing the UDF driver is now complete.
If your PC uses Windows® 2000 Professional,
proceed with step 22.
Click
20 Installation will start. When installation is
complete, some notes will appear: Check the
contents, and then click “×” at the top right of
window.
The contents displayed on actual screen may
be different from those in the figure.
Confirm
Click
22 If your PC uses Windows® 2000 Professional,
a message announcing the start for detecting
device will appear: Click “Finish” to start the
detection of device.
It may take several minutes for PC to detect
the device. When detection of the device is
complete, a message that prompts you to
restart will appear: Click “Yes” to restart the
PC.
Installing the software is now complete.
Click
Note:
• If software that detects computer virus, etc., has been
installed, invalidate it.
143
English
19 Check the displayed contents, and then click
English
Creating DVD Video from DVD-RAM Disc
Recorded on DVD Video Camera/Recorder
Using DVD-MovieAlbumSE and DVDfunSTUDIO, you can create a DVD video (DVD-R disc) from the
images recorded on this DVD video camera/recorder, following the procedure below:
1 Insert a recorded DVD-RAM disc into the
DVD video camera/recorder, and connect the
DVD video camera/recorder to the USB
terminal of PC.
2 Start DVD-MovieAlbumSE, and edit the
images on DVD-RAM disc as necessary.
3 Right-click the thumbnail from which you
wish to create a DVD video on the DVDMovieAlbumSE screen, and execute “Export”.
4 The “Program Export” screen as shown
below will appear: Perform settings for
export.
For settings on “Resolution” and “Audio” in
the “Export Mode” box, choose the options
with “Recommendations” displayed. If you
change the folder name in “Destination
Folder” column, you can also change the
folder in which the exported file will be
stored.
Note:
• Choose “Divide by Chapter” in the “Option” box:
Each scene of programme recorded on the DVD
video camera/recorder will be saved as an
independent movie file so that export can be
executed at high speed. If you do not choose
“Divide by Chapter”, movie files may be unified
and re-encoded, so it may take time to export
them. DVD-MovieAlbumSE may automatically reencode a movie recorded in the XTRA mode
containing rapidly moving scenes, regardless of
the “Divide by Chapter” setting, and it may take
some time to export the movie file.
• Any disc on which scenes were combined (see
page 110) on Disc Navigation of this DVD video
camera/recorder is re-encoded, so it may take time
to export files.
• Re-encoding may cause image degradation.
• Do not choose “Simple Export” in the “Export
Mode” setting box: Choosing it may stop export
midway.
5 Click the Start button to start export.
6 When export is complete, message “The file
exporting was completed successfully.
Do you wish to create a ‘DVD-Video’ disc”
will appear. Check the small box for “Eject the
disc being used”, and then click “Yes”.
7 The cover of disc insertion block will open:
Remove the DVD-RAM disc, insert a brandnew DVD-R disc, and then close the cover of
disc insertion block.
DVD-MovieAlbumSE will automatically end,
and the “Export to Disc” screen will appear:
Click the “Start” button.
“Program Export” Screen
144
Click
The following Collect Tool will appear: Click
“OK”.
Any scene exported on DVD-MovieAlbumSE
will be automatically registered on
DVDfunSTUDIO.
You can now change the DVD menu to the
desired style, change the title, choose the size
of disc to be used (8 cm/12 cm/12 cm doublelayered) and the playback method. Refer to
the DVDfunSTUDIO instruction manual for
details.
9 Click the Burn button: Writing to DVD-R disc
will start. When writing is complete, a DVD
video disc will be created.
Then the disc cover of this DVD video
camera/recorder will open automatically.
Note:
• The menu screen created on DVDfunSTUDIO will not
appear on this DVD video camera/recorder.
Also, depending on the written contents, the images
may not be playable on this DVD video camera/
recorder.
In such cases, use a standard DVD player to display
the created menu.
• Although DVDfunSTUDIO is compatible with DVD-RW
and 12 cm/12 cm double-layered DVD discs, these
discs cannot be used on this DVD video camera/
recorder.
• The following table shows the recordable time on 8
cm DVD-R disc from DVDfunSTUDIO.
Movie quality mode
of DVD-RAM disc in
DVD video camera/
recorder
Recordable time on
8 cm DVD-R disc
(using
DVDfunSTUDIO)
STD
Approx. 50 minutes
FINE
Approx. 25 minutes
XTRA
At least 18 minutes
* If there are many thumbnails, the recordable
time will be less than that shown in the above
table.
• A DVD video can be created from MPEG files on PC
using DVDfunSTUDIO, but it may not be playable on
this DVD video camera/recorder.
• Although DVDfunSTUDIO can handle a wide-screen
image recorded on this DVD video camera/recorder
as is, a wide-screen image recorded in the STD mode
of this DVD video camera/recorder must be reencoded.
145
English
8 DVDfunSTUDIO will automatically start.
English
Uninstalling Software
To uninstall (delete) any provided software that has been installed, use “Control Panel” to open
“Add or Remove Applications”, choose the applications to be uninstalled from the displayed list of
applications, and then click the “Change/Remove” button.
Note:
After uninstalling software, be sure to restart the PC.
Cautions When Using DVD Video Camera/
Recorder by Connecting It to PC
Note:
• Do not use Windows® application to finalise a DVD-R
disc recorded on this DVD video camera/recorder:
The disc will become unusable.
• When formatting a DVD-RAM disc on Windows®, use
the UDF2.01 format (2.0 if 2.01 cannot be selected)
(see “Terminology” on page 152). Formatting with
other standards could cause the DVD video camera/
recorder to malfunction.
• Before processing or editing photos, be sure to copy
the JPEG files in 100HPNX1 folder to the hard disk of
PC.
• Ordinary data on PC can usually be written to DVDRAM disc in this DVD video camera/recorder, but
Hitachi does not guarantee the operation.
• Data may be readable or writable from/to storage
media in this DVD video camera/recorder using
software other than that provided with this DVD video
camera/recorder, but Hitachi does not guarantee the
operation.
• If the PC is started from suspend (see “Terminology”
on page 152) (or sleep or standby) with this DVD
video camera/recorder connected to the PC, the DVD
video camera/recorder may not be recognised:
Disconnect the DVD video camera/recorder from PC
once, and restart the PC.
• Multiple DVD video camera/recorders cannot be
simultaneously connected to PC.
• Use a reference of approx. 30 minutes at approx.
30ºC or less for operation when connecting this DVD
video camera/recorder to PC.
- Use a reference of a continuous 30 minutes or less
for write operation when using the DVD-MovieAlbum
copy tool provided with DVD-MovieAlbumSE.
- If the temperature of this DVD video camera/
recorder is too high, writing or reading on this DVD
video camera/recorder may be faulty. And in
particular, note that, if an error occurs during writing
to DVD-R disc, the disc will not be usable. Take care
that the temperature of this DVD video camera/
recorder is not too high.
146
The following introduces the software (generally available) you can use with PC to edit videos
recorded on this DVD video camera/recorder. The information on the product on this page is for
reference only; Hitachi does not guarantee or endorse the operation of a given product. Contact the
software company for any inquiries on the specifications and operation requirements of the product.
●For Mac
PIXELA CORPORATION
“Pixe VRF Browser”
Information on product: http://www.pixela-1.com/vrf_browser.htm
You can capture videos recorded on a DVD-RAM disc using this DVD video camera/recorder into a
Mac and edit them (capturing videos recorded on DVD-R is not possible).
Note:
• This DVD video camera/recorder cannot be connected to a Mac via USB. When using a DVD-RAM disc recorded
using this DVD video camera/recorder on Mac, it is recommended that you use the DVD-Multi (or DVD-RAM)
drive of the above PIXELA CORPORATION.
• A DVD-RAM disc written using the above software may not be playable on this DVD video camera/recorder. In
such a case, play it back on a generally available DVD recorder, DVD player or PC.
• The information on this page is as of January, 2005. The name and specifications of a product may change. Visit
the above website for the latest information.
147
English
Introduction to Video Editing Software
English
Subsidiary Information
Introduction to Optional Accessories
CAMERA ACCESSORIES
Wide conversion lens (DZ-WL1)*
Tele-conversion lens (DZ-TL1)*
Video flash (DZ-FLH3)**
Step-up ring
(DZ-SR3437 for DZ-GX20E, DZ-MV750E and DZMV730E, DZ-SR3037 for DZ-MV780E)
• When using camera accessories, be sure to read the instruction manuals for each accessory.
* When attaching the wide or tele-conversion lens to this DVD video camera/recorder, you will need the optional
step-up ring: Attach it after removing the lens hood covering the lens (see p. 60).
** Unavailable for DZ-MV750E or DZ-MV730E.
POWER SUPPLY
Battery (DZ-BP7SW)*
* Unavailable for DZ-GX20E.
148
Battery (DZ-BP14SW)
No disc in package – such as in DVD Round Holder, square cartridge or caddy case – can be used on
this DVD video camera/recorder: Remove the disc from the holder, cartridge or caddy when using.
The way to remove a disc from its package may vary with the disc maker: See the disc instruction
sheet.
The following explains how to remove the discs made by Hitachi Maxell:
REMOVING AND REPLACING FROM/IN ROUND DVD HOLDER
1 Hold the Round DVD
Holder with SIDE A
facing up. While
pushing the two release
levers in the direction of
arrows (1) marked on
holder, slowly open
SIDE A of the holder in
the direction of arrows
(2), taking care not to
drop the disc.
Release
levers
1
2 Without touching the
recording surface, hold
the disc edge and centre
hole to remove it.
1
SIDE A mark
2
2
Do not open
more than 90º.
149
English
Removing Disc from Its Package
English
REMOVING DISC FROM CARTRIDGE
1 Use a fine tipped pen, etc. to snap off the lock 2 While pushing the
pins, and then remove them.
Snap off and
remove lock pin
release levers in the
direction of arrows,
gently pull out the
holder with the disc,
taking care not to
drop the bare disc.
●Removing disc from caddy case
1 Insert your finger
into the hole in the
centre of disc,
taking care not to
touch the
recording surface,
and slide the disc
obliquely upward
so that it is not caught by claws.
Cleaning
Be sure to set the power switch to “OFF” before cleaning this DVD video camera/recorder.
●Cleaning LCD screen and camera
lens
Use dry, soft cloth to wipe dirt off. When
cleaning the LCD screen, be careful not to use
force, scratch it, or subject it to impact: Doing
such could cause a defect in the screen, result in
display unevenness, or damage the LCD
monitor.
●If dust adheres to the viewfinder
lens, remove it using a cotton
swab, etc.
Do not rub the lens with force: Doing so could
scratch the lens.
150
●Do not use benzene or thinner to
clean DVD video camera/recorder
case
The coating of case could peel off or the case
could deteriorate. Wipe off dirt on the case with
a moist cloth which has been completely wrung
out. When using chemical cleaning cloth, follow
instructions for use.
This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is “Auto”, which will automatically start the demonstration approx. three
minutes after the DVD video camera/recorder is turned on.
Use the following procedure if you wish to view the demonstration immediately or change the setting
to “Off”.
1 Press the MENU button.
2 Choose “Initial Setup”,
“Demo Mode”, and
then press the A
button.
3 Press the f or e
I n i t i a l Setu p
Beep
Power Save
Re c o r d LED
Language
Demo Mode
Reset
ENTER RETURN
Auto
Of f
Start
RAM
button to choose the
desired option, and then press the A
button.
Note:
• You can press the DISC NAVIGATION button to stop
demonstration midway: The Disc Navigation screen
will appear.
• If you choose “Auto”, the demonstration will not start if
a disc is loaded with the power switch set to “O” or
“N”, or a card is loaded with the power switch set to
“P”.
• The demonstration function will not work when the
DVD video camera/recorder is connected to PC (for
DZ-GX20E, DZ-MV780E or DZ-MV750E only).
• While the demonstration is being given, the recording
indicator will blink.
Auto: To start demonstration approx. 3
minutes after turning the DVD video
camera/recorder on.
Off:
To set demonstration to off.
Start: To start demonstration immediately.
Press the MENU button again: The menu
screen will disappear.
To stop the demonstration midway, press the
C button.
The demo mode will end when the DVD
video camera/recorder is turned off or the
DISC EJECT button is pressed down.
151
English
Changing Setting of Demonstration
English
Terminology
DISC-PROTECT:
This disables writing to disc (protects disc from writing) so that images recorded on DVD-RAM disc
cannot be accidentally deleted and the disc cannot be initialised.
DOLBY DIGITAL:
An audio recording format widely used for DVD video. Using this technology instead of PCM
recording can enhance the recording capacity, which will allow user to achieve a recording of images
with higher resolution (bit rate) or a longer recording time.
DVD PLAYER:
This device can play back video and audio signals recorded on DVD-Video and DVD-R discs using
the DVD video format. Most DVD players can play back a DVD-R disc recorded on the DVD video
camera/recorder (some DVD players cannot play back the disc).
DVD-R DISC:
One-time recordable DVD disc: The recorded contents cannot be deleted or overwritten. If
recordable space remains on the disc, additional recording will be possible if the disc has not been
finalised.
DVD-RAM DISC:
Rewritable DVD disc.
DVD RECORDER:
This device can record video and audio on any recordable DVD disc, such as DVD-RAM, that
conforms to the DVD video recording format. Some DVD recorders can record on a DVD-R disc
conforming to DVD video format. A DVD recorder that is compatible with 8 cm DVD-RAM can play
back DVD-RAM discs recorded on the DVD video camera/recorder.
DVD VIDEO FORMAT:
This application format establishes the file name, directory structure, data format, etc. to record
videos (movies). A generally available DVD video conforms to this format.
DVD VIDEO RECORDING (DVD-VR) FORMAT:
Format to record video data on writable DVD disc: This format has been adopted for DVD video
camera/recorders, and DVD recorders that are compatible with DVD-RAM disc, etc.
152
This process makes a DVD-R disc recorded on this DVD video camera/recorder playable on a DVD
player, etc. that conforms to 8 cm DVD-R: No further recording can be made on a finalised DVD-R
disc.
HOWLING:
This phenomenon occurs as follows: When the DVD video camera/recorder is connected to a device,
such as TV, the audio input to the microphone of DVD video camera/recorder is amplified and
output from the speakers of TV, and the signal is again input to the microphone: This is repeated to
form an endless loop of audio signal, and the signal is amplified up to the audio output amplitude
limit of the device. Howling can be prevented by changing the positional relationship between the
DVD video camera/recorder and TV, or by turning down the volume on TV.
INFRARED SENSOR:
This sensor is used to adjust the white balance.
LASER PICKUP BLOCK:
This block emits laser beam to a disc, and then collects the laser beam reflected from the disc to
convert it to an electric signal. The block consists of a laser, lens, receiving element, etc.
SCENE:
Video (movie): “One scene” refers to images recorded from one press of REC button until recording
is stopped by pressing the REC button again.
Photo (still): “One scene” refers to a single photo recording by pressing the PHOTO button.
153
English
FINALISE:
English
SD MEMORY CARD:
This is a standard of memory card developed in 1999. The card is 32 mm long × 24 mm wide × 2.1
mm thick, and has 9 pins.
SLOT-IN TYPE PC:
PC that has a DVD drive into/from which a DVD is directly inserted or ejected without using a tray.
SUSPENDING PC:
This function stores the status of PC before it is turned off: It will restart the work from the status
immediately before PC was turned off, when the PC is turned on next time.
THUMBNAIL:
This refers to a reduced screen displayed on Disc Navigation in order to identify the recorded image
contents.
UDF2.01 FORMAT:
UDF stands for Universal Disc Format: This is a world standard file format for optical storage
defined by OSTA*. UDF revision 2.0 or 2.01 has been adopted for DVD-RAM disc to ensure
compatibility with DVD recorders and PCs, as well as DVD video camera/recorders.
* Optional Storage Technology Association: An organization that is promoting writable optical
storage.
VIDEO SELECTOR:
This device can input multiple audio and video signals, and select the desired audio and video
signals among those input signals, to output them.
154
Check 1
No movie can be recorded
Movie can be recorded only on DVD-RAM or DVDR disc.
Check the following:
• Is proper type of disc inserted?
• Is power switch set to “O”?
• Is the DVD-RAM disc in DVD video camera/
recorder write-protected? Release the writeprotect.
• When using DVD-R disc: Has the disc been
finalised?
• Does disc have remaining recording space?
If movie still cannot be recorded after the above
check is clear, the disc may be damaged: Use
another disc.
Check 2
No still can be recorded
Still can be recorded only on DVD-RAM disc or SD
memory card.
Check the following:
• Is proper type of disc or card inserted?
• Is power switch set to match the recording
medium?
− When using DVD-RAM disc: Set to “N”.
If the LOCK switch on this DVD video camera/
recorder is set to L (upper position), set it to
K (lower position).
If the LOCK switch is set to L (upper position),
switching to “N” is not possible.
− When using SD memory card: Set to “P”.
• Is loaded DVD-RAM disc write-protected?
• When using SD memory card: Is the erase
prevention switch locked? (p. 30)
• Does disc or card have remaining recording
space?
If still cannot be recorded after the above check is
clear, the disc or card may be damaged: Use
another disc or card.
Check 3
Skip or search playback does
not work well
If the temperature inside the DVD video camera/
recorder is high, normal operation may not be
possible. Turn the DVD video camera/recorder off,
wait for a few moments, and then turn it on again
for operation.
Check 4
• No operation can be
performed because the
ACCESS/PC or CARD
ACCESS indicator on this
DVD video camera/recorder
remains lit or blinking.
• After disc or card is
inserted, it takes some time
until recording is possible.
In the following cases, it will take more time than
usual until operation is possible:
• Immediately after a disc or card is reinserted.
• When a long time has elapsed since the DVD
video camera/recorder was turned off last.
• When the temperature is greatly different from
the status of previous recording.
• When disc with scratches, dirt or fingerprints is
inserted.
• When disc is subject to severe vibrations.
• When the battery or DC power cord was
disconnected instead of following the correct
procedure using power switch to turn the DVD
video camera/recorder off.
155
English
No DVD Video Camera/Recorder Operation –
Check the Following:
English
Check 5
No DVD video camera/recorder
operation
Is a fully charged battery attached?
Is the DVD video camera/recorder powered from
AC outlet?
Check 6
No image in viewfinder
Is LCD monitor open?
No image will appear in viewfinder unless the LCD
monitor is closed and securely locked to DVD
video camera/recorder.
156
Check 7
No image appears on the LCD
screen or in the viewfinder
• Is DVD video camera/recorder connected to PC
using PC connection cable? (DZ-GX20E/DZMV780E/DZ-MV750E)
Unplug the PC connection cable.
• Does DVD video camera/recorder stop at the
end of the scene to which wipe-out was set and
played back?
Press the DISC NAVIGATION button.
English
Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message
appears, refer to the following table and take appropriate corrective action.
Messages are arranged in alphabetical order.
Message
Cause & Troubleshooting
Reference
page
(1) Data error in a part
of image file. Repair
data now?
(2) Found error in image
file. Repair data now?
(3) Data error in all
image file. Repair all
data now?
It is possible that the system cannot normally complete writing of
file when power is turned off for some reason during recording or
editing (deleting, dividing or combining scenes, or creating play
list). Selecting “YES” will automatically repair the video file, but
even if “NO” is selected, the same message will appear when the
DVD video camera/recorder is turned on next time. (Do not
remove the disc while the DVD video camera/recorder is
recognising it: Ignoring this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
• Repair will normally be complete in several minutes, but it may
take longer (up to one hour).
• Be sure to use the AC adapter/charger to power the DVD video
camera/recorder when repairing data: Repair is not possible
using a battery. If a battery has been attached, turn the power
switch off once, connect the AC adapter/charger, and then start
repairing.
• Data may not be repaired, depending on the timing when
power was turned off.
• Data may not be repaired normally if data recorded on another
recorder is mixed in.
• The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
• Since the date/time for repair is added to the repaired data
(only the corrected portion for partial repair), the original date/
time information will be lost.
• Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost in case of message (2) (3) only.
• See *1 on page 163.

(1) Disc is not
DVD-R disc that was not initialised for camera use was inserted.
formatted. If it formats, it
becomes possible to
use for camera.
(2) However, when you
record from PC
connection terminal,
please do not format.
(3) Format the disc
now?
Battery is almost empty. Replace with a charged battery, or use AC adapter/charger to
Replace it.
power the DVD video camera/recorder.
Cannot combine scene. Unless consecutive scenes are selected, they cannot be
combined.
49
42, 46
110
157
English
Message
Cause & Troubleshooting
Reference
page
Cannot combine scene Scenes in different programmes (different recording dates)
of multiple programs.
cannot be combined. Create a Play list first, and then combine
Create Playlist first, and such scenes on the play list.
then combine scenes.
110
Cannot combine.
Deselect PHOTO
scenes.
110
Select only movies and combine them.
Cannot combine. Select Select a range of at least 2 scenes to be combined, and then
multiple scenes.
combine them.
Cannot delete scenes.
This may occur when scene that was edited for division, etc. is to
be deleted.
Combine the divided scenes, and then delete them.
110
107, 110
Cannot execute.
Change display
category to ALL.
This message will appear if you attempt to combine or move
scenes with “Category: VIDEO or PHOTO” specified.
133
Cannot execute.
Unselect multiple
scenes.
Division or change in thumbnail was executed when multiple
scenes were selected.
103
Cannot read disc.
Check dirt/crack/bothsides contrary/inserted
correctly.
Error occurred while the disc was being recognised. Make sure
that there is no scratch or dirt on disc, that the surface/back of
disc is not reversed, and that the disc is firmly pushed against the
turntable. See *3 on page 163 for troubleshooting.
7, 29, 48
CANNOT RECORD
PHOTOS
Are you using DVD-R disc? You cannot record still image on
DVD-R disc (recordable of still images from PC). Use DVD-RAM
disc to record still images.
27
Cannot replace
thumbnail on PHOTO
scenes.
The thumbnail of a still cannot be changed.
Select a movie.
Cannot select any more The maximum number of selectable scenes is 999.
scenes.
113
116
CARD ALMOST FULL
Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
Card error has
occurred.
Format the card now?
Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD video camera/
recorder, choose “YES” and format it.
Card error has
occurred.
Formatting is not
complete.
The card may be damaged: Use another card.
Card error.
• The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
• Data other than still image may be included: Use another card.
30
Card error could have occurred during editing of scenes. Turn off
the DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be attempted.
46, 47
Card error has
occurred. Keep card
inside & restart.
158
32, 107, 130
129
30
Card full.
Cause & Troubleshooting
Reference
page
Delete unnecessary stills and try the card, or use another card.
No more recording on this card can be done: Delete unnecessary
stills or use another card.
32, 107
Card full.
Cannot execute.
Delete unnecessary stills and try the card, or use another card.
Card is not formatted.
Format the card now?
Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose “YES” and format it.
129
CHECK DISC
A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged.
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
28, 130
Control Information
Error.
DISC ACCESS
DISC ALMOST FULL
Mismatch may occur between the recorded image and scene
information.
Update the control information.
32, 107
131
• Use another disc.
• See *3 on page 163.
27, 29
The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
52, 54
This DVD video camera/recorder is verifying whether the correct
disc has been inserted.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
155
Remaining free space on disc is less than 1 minute of video or 10
photos: Delete unnecessary scenes or use another disc.
31, 107
Disc error has occurred. • Disc error occurred during finalising, and finalising failed.
Finalizing is not
Replace the disc.
complete.
• See *3 on page 163.
132
Disc error has occurred. • Has the disc been initialised on PC? Has initialising the disc on
Format the disc now?
PC been interrupted?
Choose “YES” and initialise the disc when using it on this DVD
video camera/recorder. Initialising the disc will erase all data on
it.
• See *2 on page 163.
129
Disc error has occurred. The disc may be dirty.
Formatting is not
Remove the disc and wipe off fingerprints, dust, etc. before
complete.
reusing it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
29, 129
Disc error has occurred. Disc error could have occurred during editing of scenes.
Keep disc inside &
Turn off the DVD video camera/recorder with the disc being used
restart.
in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
46
159
English
Message
English
Message
Disc error.
Cause & Troubleshooting
• Use another disc.
• See *3 on page 163.
Reference
page
27, 29
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialise the disc or use another disc.
• Initialising the disc will erase all data on it.
129
Disc full. Cannot
execute.
Delete unnecessary scenes before using this disc, or use another
disc.
107
Disc has no data.
This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
Disc has no Play List.
Switching of play list was selected with no play list stored.
Disc includes protected The disc may be software protected from a device other than this
scenes. Delete scenes? DVD video camera/recorder. To release this case, use a device
that has executed software-protect.

122

Disc is full. Cannot add
control info.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
107, 110
Disc is not formatted.
Format the disc now?
• Has the disc been initialised on a PC?
Choose “YES” and initialise the disc when using it on this DVD
video camera/recorder. Initialisation will delete all data on the
disc.
• See *2 on page 163.
129
The temperature inside the DVD video camera/recorder is too
high, and reading or writing of the data on disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
47
Drive overheat. Please
retry later.
DVD-R Disc, 16:9 mode With DVD-R disc, the setting of 16:9 mode will not be possible
cannot be changed
when the Video mode is STD.
when Video mode is
STD.
DVD-R Disc, Video
mode and 16:9 mode
cannot be changed.
With DVD-R disc, the movie quality mode and 16:9 mode once
used for recording cannot be changed.
END OF DISC
The disc is full.
You cannot record on this disc any more. Prepare another disc or
delete unnecessary movie scenes from this disc.
End scene cannot be
divided.
Division is not possible at the end of scene.
Error occurred. Please
replace disc or format
disc.
• Abnormality has occurred with the DVD-RAM disc to be
repaired. Initialise the disc before using it, or use the another
disc. Initialising the disc will erase all data on it.
• See *2 on page 163.
Error occurred. Please
replace disc.
An abnormality occurred with a DVD-R disc to be repaired.
Replace the disc.
160
92
31, 90, 92
31
109
129

Cause & Troubleshooting
Reference
page
Finalize may not be
Instantaneous shut off occurred during finalising, after which
complete. Finalize again power was supplied and disc was inserted.
now?
132
It is unrecordable on
this card.
The inserted card cannot be used in this DVD video camera/
recorder: Use another card.
30
JPEG file related to
scenes are not found.
This message will appear when stills recorded on DVD-RAM disc
using a device other than this DVD video camera/recorder are to
be copied to card.

No card.
Insert a card.
51
No card.
Please insert card.
No card is inserted.
Insert a card.
51
NO DISC
This message may appear when the DVD video camera/recorder
or disc is moved from a cold place to a warm place.
Condensation has occurred on the camera/recorder lens or DVDRAM drive. Do not remove the disc; leave the DVD video camera/
recorder turned off in a place as dry as possible for 1 – 2 hours.
7
The disc has not been inserted.
Insert it.
48
The disc is not inserted correctly.
Push the disc against the turntable at the centre until a click is
heard.
See *3 on page 163.
48
Is the disc surface/bottom reversed?
Check the surface/bottom of disc, and reinsert it correctly.
48, 49
No more scenes. Play
List was deleted.
• All scenes are deleted from the play list.
• Since a play list with no scenes cannot be supported by
specifications, a play list from which all registered scenes have
been deselected will be deleted.
Photo cannot be
divided.
Still image cannot be divided.
PlayLists over limit.
An attempt was made to create new play list or copy play list,
even though limit specified for play lists in the video recording
standard had already been stored.
121
Same scenes on Play
List will be deleted.
Delete scenes?
• This will appear when scenes are to be deleted.
• When a play list exists on disc, an attempt to delete scenes in
programme will display this message. (This message will not
appear if you deselect scenes from play list.)
107
Scenes over limit.
Cannot add scene.
The number of scenes entered in play list has reached the limit
that can be entered.
Delete several scenes.
121, 125
Scenes over limit.
Cannot divide scene.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
109, 121
Scenes over limit.
Cannot move scene.
This message will appear if you try to move a scene when the
number of scenes has already reached the registrable limit.
110, 121
Stop processing
The C button was pressed to stop processing of multiple scenes.
124, 125
109

161
English
Message
English
Message
Cause & Troubleshooting
Reference
page
There was no scene
which can be deleted.
This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
This card cannot be
used.
Please replace card.
The card cannot be used in this DVD video camera/recorder: Use
another card.
30
This disc cannot be
used. Please replace
disc.
A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc.
28
This disc is recorded by This DVD video camera/recorder can use only discs recorded on
the PAL system. A disc recorded on the NTSC system cannot be
the NTSC system.
Please replace disc.
used on this DVD video camera/recorder.
107, 115

Top scene cannot be
divided.
Division is not possible at the start of scene.
UNFORMAT DISC
The disc is not initialised or it is damaged.
If this message appears, be sure to initialise the disc on this DVD
video camera/recorder before using it.
Reinitialising even a disc used on this DVD video camera/
recorder may be necessary (initialising will erase all recorded
contents on disc). If this message appears, try to initialise the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
129
See *2 on page 163.
29
109
Use AC adapter/
charger.
Finalisation is not possible when the DVD video camera/recorder
is powered by a battery: Use the AC adapter/charger for
finalisation.
46, 132
Use AC adapter/
charger.
Turn off power.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
46
VIDEO scene cannot be No movie can be copied to card.
copied to card.
Select stills and copy them to card.
114
Write protected.
Check card.
A card with the erase prevention locked is inserted: Unlock the
switch.
30
Write protected.
Check disc.
• A write-protected disc is inserted.
• Release the write-protect using the Disc Navigation menu.
130
162
163
English
*1
• This message may also appear when dirt adheres to disc. If this message appears when a recorded
disc is recognised immediately after it is inserted, do not repair the disc; remove it and then use a
soft, dry cloth to clean off the dirt before using it.
• This message may also appear when condensation occurs. In this case, do not repair the disc; turn
the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
• If the repair message appears when you turn the DVD video camera/recorder on from off with a
disc loaded after recording on it, choose repair.
• If the repair message appears when recording and playback are normally possible with another
disc – and no condensation occurs and the disc is not dirty – choose repair.
*2
• This message may also appear when dirt adheres to disc. In this case, do not initialise the disc:
Remove it and then use the provided disc cleaning cloth to clean off the dirt before using it.
• This message may also appear when condensation occurs. In this case, do not initialise the disc;
turn the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
• Initialisation will delete all data on disc.
*3
• This message may also appear when dirt adheres to disc. Remove the disc and then use the
provided disc cleaning cloth to clean off the dirt before using it.
• This message may also appear when condensation occurs. Wait until the DVD video camera/
recorder dries out, and then turn it on again.
• This message will appear when a single-sided disc is inserted in reverse. Reinsert the disc correctly.
(Insert the disc with the label printed surface facing the outside.)
English
Troubleshooting
Check to see the following before asking for a repair. If the suggested solution still cannot restore the
DVD video camera/recorder to normal, do not attempt to repair it yourself, but consult your dealer.
Power supplies
Symptom
Battery cannot be
charged.
Cause and Correction
Reference
page
Is the ambient temperature too low or too high?
Charge the battery at 10 – 30ºC.
Is the battery abnormally hot?
Remove the battery, leave it for a while to cool down, then charge
it.
Is the DC power cord connected to AC adapter/charger? Unplug
it.
42
Has the battery been unused for a long time?
Remove the battery, and then reattach it. If the battery is still not
charged, it may be dead: Purchase a new one.
• If the battery does not charge after you try the above four
procedures, it may be dead: Purchase a new battery.
Battery weakens fast
The CHARGE indicator
on AC adapter/charger
is blinking.
Power turns off
immediately after being
turned on.
Are you using the DVD video camera/recorder where the
temperature is low?
A fully charged battery (DZ-BP14S/DZ-BP7S/DZ-BP14SW/DZBP7SW) may be discharged sooner than usual at low
temperatures. Keep extra batteries on hand.
44
Battery may be dead.
The performance of battery will deteriorate if it is used for an
extended period of time or frequently: Purchase a new battery.
45
Is the ambient temperature too low or too high?
Charge the battery in environment where the temperature is 10 –
30ºC.
The battery has possibly discharged excessively. Continue
charging: After a while, the battery will be charged to the
specified voltage, and the CHARGE indicator will light. Then the
battery charge will be completed normally.
42
Is battery charged?
Charge it.
42
When power is turned
on, the LCD screen will
turn on and off.
Power goes off
unexpectedly.
Is Power Save set to “On”?
If the powered DVD video camera/recorder is left for as long as 5
minutes without recording or playback with “Power Save: On”
specified, it will automatically turn off to save battery power. To
restart recording in this case, set the power switch to “OFF” and
then set it to “O”. You can also specify “Power Save: Off” to stop
automatic power off.
Power cannot be turned Detach the battery or AC adapter/charger once, and then press
off.
the RESET button of DVD video camera/recorder: Reattach a
power supply to DVD video camera/recorder before turning it on
again.
164
97
43, 46, 170
Even if the DVD video
camera/recorder is off,
opening the cover will
cause the ACCESS
indicator to blink.
Cause and Correction
The DVD video camera/recorder will automatically turn on to
recognise a disc: Closing the cover will automatically turn the
DVD video camera/recorder off.
Reference
page
49
During recording
Symptom
Cause and Correction
Reference
page
Pressing the REC or
PHOTO button will not
start recording.
Is the disc write-protected or the card locked?
Recording starts but
stops immediately.
Is disc scratched or does dirt or fingerprint adhere to it?
Clean the disc. If there is still no improvement, replace the disc.
54
LCD screen is hard to
see.
Has brightness of LCD screen been adjusted?
Stop recording and adjust the brightness.
95
30, 130, 155
Is the DVD video camera/recorder being used outdoors?
Use the viewfinder. When using LCD monitor, adjust its angle so
that LCD screen is not exposed to direct sunlight.
Focus is not correct.
An error message for
repair appears.
38, 39
Is it difficult to use auto focus with your subject?
Focus manually.
75
Does “MF” appear?
The DVD video camera/recorder is set to manual focus. Focus
the subject manually, or release manual focus.
74
Is the dioptre control correctly adjusted if you are using the
viewfinder as a monitor?
Adjust the dioptre control.
39
In cases other than the above, set the power switch to “OFF”, and
then set it to “O”, “ N” or “ P” again.
47
Repair is only possible when the DVD video camera/recorder is
powered by the AC adapter/charger. Remove the disc, and then
insert another disc: The removed disc can later be repaired by
connecting the AC adapter/charger.
46
Unevenness appears on Did you press the LCD monitor or the area around it?
If the LCD monitor is pressed, some unevenness will occur.
LCD monitor screen.
Release your hand and leave the LCD monitor for a while:
Normal display will be restored.

165
English
Symptom
During playback
English
Symptom
Cause and Correction
Recognition of disc is
not complete
Is disc dirty?
Use the provided disc cleaning cloth to clean it.
Pressing the playback
button will not start
playback.
Has the image been recorded by devices other than this DVD
video camera/recorder?
Playback of image recorded on devices other than this DVD video
camera/recorder may be impossible on this DVD video camera/
recorder.
Has scene been edited on a device other than this DVD video
camera/recorder?
If a scene recorded on this DVD video camera/recorder is edited
on a device other than this DVD video camera/recorder, playback
may not be possible on this DVD video camera/recorder.
No playback picture
appears on TV screen.
Photos on card cannot
be played back.
54
61
Is TV input selector set correctly?
Some TVs have multiple video input jacks. Check whether the
correct input was selected on TV to match the connected jacks. If
the DVD video camera/recorder is connected to VCR, set its
input selector to “external input (LINE)”.
80
Is the DVD video camera/recorder connected to TV correctly?
Check the connections.
79
Playback picture is
Is disc scratched or does dirt or fingerprint adhere to it?
momentarily interrupted. Clean the disc.
No sound
Reference
page
Is the TV volume control set correctly?
Adjust TV volume control, and be sure to adjust the volume on
TV.
29
80
This DVD video camera/recorder can play back image data
recorded on SD memory card in other digital cameras conforming
to the DCF (Design rule for Camera File system) standard. The
range of image data normally playable on this DVD video
camera/recorder is that with pixels from 80 horizontal × 60
vertical to 4000 horizontal × 3000 vertical. If the pixel data is
outside this range, blue thumbnails will appear (thumbnails* in
the figure), meaning the image is unplayable.
A l l scenes
1/ 6

PLAY
*
Fig. 1
Even when the number of pixels is within the above range,
playback may not be possible, depending on the recording status
of the digital cameras used.
DCF (Design rule for Camera File system) is an integrated image
file format of digital cameras: Image files can be used on all
digital devices conforming to DCF.
It will take some time to When playing back a still, “Playback.” will appear: Stills with a
play back photos on
large number of pixels will take some time to appear.
card.
166

Symptom
No drive icon appears
on PC.
Cause and Correction
Reference
page
The DVD video camera/recorder is not turned on.
Check the power supply.
47
Turn PC off and then disconnect the PC connection cable. Turn
PC on again, and then use the PC connection cable to connect
the DVD video camera/recorder to PC.

Make sure the PC connection cable is completely plugged into
this DVD video camera/recorder.

Error occurs in playback If error occurs with USB connection, the transfer rate is not
of DVD video camera/
sufficient. It is recommended that you use a USB terminal
conforming to USB2.0 when connecting the DVD video camera/
recorder on PC.
recorder.
138
Application is not
normally run on PC.
Turn the PC and DVD video camera/recorder off, and try again.
Error occurs during
writing to disc.
The temperature of DVD video camera/recorder is too high due
to continuous operation.
Disconnect the DVD video camera/recorder from PC once,
remove the disc from the DVD video camera/recorder, and then
turn it off. After a few moments, connect them again and write to
a brand-new disc.

Connect the DVD video camera/recorder to another USB terminal
of PC. If your PC is a desktop type, it is recommended that you
use USB terminal on the back of PC. If you are using USB2.0
extended card, it is also recommended that you install the newest
version driver provided by each USB2.0 card maker.

DVD-RAM/R drive built
into PC cannot be used
after the provided
software has been
installed.
This problem may be solved if the software related to DVD-RAM/
R of your PC is upgraded, or if the UDF driver is uninstalled.
However, with Windows® Me / 2000 Professional, uninstalling the
UDF driver will make it impossible for the JPEG stills recorded on
DVD-RAM of this DVD video camera/recorder to be read by the
PC.

DVD-R disc cannot be
played back on DVDMovieAlbumSE.
DVD-MovieAlbumSE does not support playback or data read on
DVD-R disc: Use generally available DVD video playback
software to play back DVD-R disc on PC.
140
Error appears when
starting DVDMovieAlbumSE.
Make sure that your PC display adapter (video card) conforms to
DirectX8.1.
Video written to hard
disk of PC cannot be
edited on DVDMovieAlbum copy tool.
DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard
disk of PC: Copy the data to another DVD-RAM disc and then
edit it.

Movies are not
recognised by
application in PC.
Make sure the power switch of this DVD video camera/recorder is
set to “O” or “ N”.

Transfer of images
stops.

138
167
English
When the DVD video camera/recorder is connected to PC:
English
Symptom
Cause and Correction
Reference
page
The DISC EJECT
button is not valid when
the DVD video camera/
recorder is connected to
PC.
While the DVD video camera/recorder is connected to PC, use
Explorer to right-click the DVD video camera/recorder drive icon
and execute “Eject”.
If DVD-MovieAlbumSE is running, clicking the eject button on
DVD-MovieAlbumSE will open the cover of disc insertion block of
this DVD video camera/recorder: Remove the disc.

When the time stamp of
file in DVD-RAM is
viewed on PC, it is
different from the actual
recording time.
The file system of this DVD video camera/recorder is operated on
Greenwich Mean Time (GMT), and time lag information has not
been set. With Windows® as of January, 2005, the time stamp of
file viewed on Explorer looks different from the actual recording
time. The actual recording time will appear for date/time
indication on playback screen.

When DVDMovieAlbumSE is
started, “Disc in Drive X:
cannot be used”
appears.
A disc other than DVD-RAM is loaded in drive: DVDMovieAlbumSE cannot be used for media other than DVD-RAM.

Click the “Preference” button in the dialog box, click the “Device
Setting” tab to choose the drive where DVD-RAM disc is loaded
in the “Drive Select” column, and then click “OK”.

An image that should
have been recorded
does not appear when
DVD-MovieAlbumSE is
started.
Click the “Preference” button at top right of DVD-MovieAlbumSE
screen, click the “Device Setting” tab to choose the drive where
DVD-RAM disc is loaded in the “Drive Select” column, and then
click “OK”.
No USB HS (high
speed) connection even
when USB2.0 card is
used.
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker
in order to operate the USB2.0 card at HS (high speed).
Executing “Export” on
DVD-MovieAlbumSE
will interrupt reading
midway.
Do not choose “Simple Export”: If you do, reading will stop
midway.
When executing
“Export” on DVDMovieAlbumSE, it will
take time to read.
• If stills are included in the range of “Export”, it may take more
time because data must be re-encoded and read.
• If “Divide by Chapter” is not chosen, it may take some time
because data will be read while being re-encoded.
144
“Hardware Removal”
results in error.
Exit Windows® once, and then disconnect the DVD video
camera/recorder. If your PC uses Windows® 2000 Professional,
the problem may be solved if you install Windows® 2000 Service
Pack 3 or later.

168

144

Symptom
Cause and Correction
Reference
page
Power does not come
on, or no operation
occurs by pressing
button.
Execute system reset (press the RESET button).
Has the DVD video camera/recorder been subjected to impact?
The DVD video camera/recorder could be damaged. Consult your
dealer.

The date and time are
incorrect.
Has the DVD video camera/recorder been left unused for a long
period of time?
The internal backup memory battery may be discharged:
Charge it.
40
No scene can be
deleted.
Is the cursor placed on the scene to be deleted?
If the selected scene (framed in red) exists, that scene will be
deleted even if you use yellow cursor to select any scene. Check
the colours of cursors and bar graph on the thumbnail screen.
101
Disc cannot be
removed.
(Cover will not open.)
Did you detach the battery or AC adapter/charger before setting
the power switch to “OFF”?
Is the battery charged?
Connect a charged battery or the AC adapter/charger, and then
press the DISC EJECT button to remove the disc.
Did the DVD video camera/recorder turn off because the battery
remaining level ran out?
Connect a charged battery or the AC adapter/charger, set the
power switch to “OFF”, and then press the DISC EJECT button to
remove the disc.
46, 47
Is the remote control pointed at the infrared receiver on DVD
video camera/recorder?
Point it at the infrared receiver to operate the DVD video camera/
recorder.
37
Is the infrared receiver on DVD video camera/recorder exposed
to direct sunlight or strong fluorescent light, etc.?
The remote control cannot operate the DVD video camera/
recorder when strong light strikes the infrared receiver. Adjust the
place or angle of the DVD video camera/recorder.
37
Is there battery in the remote control?
Also check the polarities of battery. The battery could be dead:
Try replacing it.
36
Is the DVD video camera/recorder powered?
Turn it on.
47
Is disc correctly inserted?
Was disc inserted from wrong direction?
Remove the disc and then reinsert it.
48
DVD video camera/
recorder cannot be
operated from remote
control.
Disc cover cannot be
closed.
Operating sound is
heard cyclically.
170
Connect a fully charged battery or AC adapter/charger, and then
turn the DVD video camera/recorder on.
42, 46
This sound is heard because the disc is cyclically operated and
does not indicate a fault.

Some vibrations are felt These vibrations or sound are caused by disc drive: This does
or slight sound is heard not indicate a fault.
from mechanism.

169
English
Miscellaneous
English
System Reset
If the DVD video camera/recorder does not operate normally, perform “System Reset”: The DVD
video camera/recorder may recover to normal. “System Reset” will reset all settings to factory
defaults. The date and time will also be reset: Set the date and time again before using the DVD
video camera/recorder.
1 Set the power switch to “OFF” to turn the
DVD video camera/reorder off.
Note:
Do not press the reset button with undue force.
Detach the battery or AC adapter/charger.
2 Use a fine tipped pen to hold down the reset
button for several seconds.
All settings will be reset.
●List of setting items
Item
Camera Functions
Setup
Auto
p. 85
White Bal.
Auto
p. 87
ElS
On
p. 89
Dig.Zoom
40×
p. 59
MIC.Filter
Off
p. 89
Quality
Initial Setup
FINE
p. 90
FINE
p. 93
16:9
Off
p. 91
Self Timer
Off
p. 93
OSD Output
On
p. 94
Date Set
Date Mode
LCD/EVF Setup
1/ 1/2005 0:00
D/M/Y
p. 40
p. 41
LCD Brightness
p. 95
EVF Brightness
p. 95
Color Level
p. 96
EVF Display
Auto
p. 96
Beep
On
p. 97
Power Save
Off
p. 97
Record LED
On
p. 98
Language
English
p. 98
Demo Mode
Auto
p. 151
* Some items will not appear depending on the disc or card inserted.
170
Setting
method
Program AE
Record Functions Setup VIDEO Mode
Date Setup
Default
CCD
English
Major Specifications
DZ-GX20E
: 1/3.6-inch interlaced
DZ-MV780E
: 1/4.5-inch interlaced
DZ-MV750E/DZ-MV730E
: 1/6-inch interlaced
Total number of pixels
DZ-GX20E
approx. 2,120,000
DZ-MV780E
approx. 1,330,000
DZ-MV750E/DZ-MV730E
approx. 800,000
Number of effective pixels
DZ-GX20E
Movie: approx. 1,230,000
DZ-MV780E
Movie: approx. 690,000
DZ-MV750E/DZ-MV730E
Movie: approx. 410,000
Still:
Still:
Still:
Lens
approx. 1,920,000
approx. 1,100,000
approx. 410,000
DZ-GX20E
: F1.8 – 2.2
f = 4.5 – 45 mm
Filter diameter: 34 mm
Thread pitch: 0.5 mm
DZ-MV780E
: F1.8 – 2.3
f = 3.2 – 32 mm
Filter diameter: 30.5 mm
Thread pitch: 0.5 mm
DZ-MV750E/DZ-MV730E
: F1.6 – 2.3,
f = 2.78 – 43.3 mm
Filter diameter: 34 mm
Thread pitch: 0.5 mm
Focus
Auto/Manual
Zoom
Optical 10× (DZ-GX20E/DZ-MV780E),
Optical 16× (DZ-MV750E/DZ-MV730E),
240× with digital zoom added, 40× for still
Required minimum illumination
0.3 lx in Low Light mode
Viewfinder
0.2-inch colour (equivalent to approx. 200,000 pixels)
LCD monitor
2.5-inch colour TFT (approx. 120,000 pixels)
Electronic image stabiliser
Electronic type
Shutter speed
1/4 – 1/4000 second (movie)
Self-timer recording
Still recording only
External microphone jack
ø3.5 mm stereo mini-jack: (a plug-in power type microphone cannot
be used)
Recording mode
Movie (with sound)
Still (with DVD-RAM disc, SD memory card)
171
English
Maximum
recordable time
(per side)
DVD-RAM disc
DVD-R disc
Maximum number DVD-RAM disc
of recordable stills (per side)
approx. 18 minutes (XTRA)
approx. 30 minutes (FINE)
approx. 60 minutes (STD)
DZ-GX20E
approx. 750
DZ-MV780E/DZ-MV750E/DZ-MV730E approx. 999
If movies and stills are mixed on one disc, the recordable number
will decrease.
SD memory card
(when using
32 MB card)
DZ-GX20E
approx. 29 (in FINE mode)
DZ-MV780E
approx. 58 (in FINE mode)
DZ-MV750E/DZ-MV730E
approx. 232 (in FINE mode)
Varies depending on the recording quality and the type of card.
(p. 32)
Recording format
DVD-RAM disc
Movie:
Conforming to DVD video recording (DVD-VR) format
(Dolby Digital)
Still:
Simultaneous recording, conforming to DVD video
recording (DVD-VR) standard (704 × 480 pixels) and
JPEG (DZ-GX20E: 1600 × 1200 pixels, DZ-MV780E:
1280 × 960 pixels, DZ-MV750E/DZ-MV730E: 640 × 480
pixels)
DVD-R disc
Movie:
Conforming to DVD video format (Dolby Digital)
Card
Still:
Conforming to JPEG (DZ-GX20E: 1600 × 1200 pixels,
DZ-MV780E: 1280 × 960 pixels, DZ-MV750E/DZMV730E: 640 × 480 pixels) standard
Audio playback format
MPEG Audio layer 2, Dolby Digital
Recording medium
8 cm DVD-RAM disc (conforming to DVD-RAM Ver. 2.1)
8 cm DVD-R disc (conforming to DVD-R for General Ver. 2.0)
SD memory card
Jacks
Video/audio output ×1, External microphone input ×1,
PC connection terminal (connected to PC USB port) ×1 (not
provided with DZ-MV730E)
Battery system
Lithium-ion
Power consumption
When recording with LCD monitor off (DVD-RAM disc used)
DZ-GX20E
Dimensions
(W × H × D)
172
approx. 4.4W (in FINE mode)
DZ-MV780E
approx. 3.8W (in FINE mode)
DZ-MV750E/DZ-MV730E
approx. 3.2W (in FINE mode)
DZ-GX20E
: approx. 51 × 90 × 137 mm
(excluding projections)
DZ-MV780E
: approx. 51 × 86 × 123 mm
(excluding projections)
DZ-MV750E/DZ-MV730E
: approx. 51 × 89 × 133 mm
(excluding projections)
0 – 40 ºC (less than 80%).
0 – 30 ºC when connected to PC
Storage temperature
-20 – 60 ºC
Weight
DZ-GX20E
English
Operating temperature (humidity)
approx. 480 g (without battery or disc)
DZ-MV780E approx. 420 g (without battery or disc)
DZ-MV750E approx. 450 g (without battery or disc)
DZ-MV730E approx. 450 g (without battery or disc)
Total weight when recording
DZ-GX20E
approx. 555 g
DZ-MV780E approx. 475 g
DZ-MV750E approx. 505 g
DZ-MV730E approx. 505 g
Provided accessories
AC adapter/charger, Battery, AV/S output cable,
Infrared remote control (not provided with DZ-MV730E),
Lithium battery for remote control (not provided with DZ-MV730E),
Lens cap, Lens cap string, Shoulder strap, Mains lead,
DC power cord,
Software CD-ROM (not provided with DZ-MV730E),
PC connection cable (not provided with DZ-MV730E),
Single-sided 8 cm DVD-R disc (not provided with DZ-MV730E),
Disc cleaning cloth
173
English
Index
Numerics
16:9 .................................................................91
240x (Dig. Zoom) ..............................................59
40x (Dig. Zoom) ................................................59
8 cm bare disc ..................................................27
A
AC adapter/charger ...........................................46
ACCESS/PC indicator ..................................52, 54
Add (edit) .......................................................124
All programmes ...............................................118
Auto (programme AE) ........................................85
Autofocus .........................................................74
AV output jack ...................................................79
B
Backlight correction ...........................................76
Battery .............................................................42
Attaching to DVD video camera/recorder .......43
Charging ..................................................42
Recordable time on DVD video camera/
recorder .................................................44
Removing from DVD video camera/
recorder .................................................43
Setting Up ................................................42
BATTERY EJECT button ....................................43
Beep ...............................................................97
Black & White fade ..........................................111
Brightness ........................................................95
C
Camera Functions Setup ....................................85
Capacity .........................................................130
Card
Available ...................................................30
Capacity ...........................................32, 130
Category ................................................133
Format ...................................................129
Handling ...................................................30
Quality .....................................................93
CHARGE indicator .............................................42
Cleaning ........................................................150
Colour Level .....................................................96
Connecting to TV ..............................................79
Copy ..............................................................114
Create ...........................................................121
D
Date and time ...................................................40
Date setup ........................................................40
Defaults ...........................................................99
Delete (edit) ....................................................125
Delete (play list) ..............................................127
Delete (scene) ........................................107, 124
Demo Mode ....................................................151
Detail (scene) .................................................117
Dig. Zoom ........................................................59
Dioptre control ..................................................39
Disc .................................................................27
Available ...................................................27
174
Capacity ...................................................31
Finalise Disc ...........................................132
Format ...................................................129
Handling ...................................................29
Protect ...................................................130
Update Control Info. .................................131
DISC EJECT button ...........................................50
Disc guide ........................................................48
Display .............................................................55
Information LCD ........................................55
Scenes information ..................................117
Viewfinder .................................................39
Divide ............................................................109
DVD player ...............................................81, 152
DVD-R .............................................................27
DVD-RAM ........................................................27
DVD recorder ............................................81, 152
DVD video format ............................................152
DVD video recording (DVD-VR) format ..........33, 152
E
Edit (play List) .................................................123
EIS ..................................................................89
EXPOSURE button ............................................76
Exposure control ...............................................76
External microphone jack ....................................77
F
Fade ..............................................................111
Finalise Disc ...................................................132
FINE (VIDEO Mode) ..........................................90
FOCUS button ..................................................74
Format Disc ....................................................129
Frame advance/Frame back ................................62
G
Go To (during playback) ......................................64
Go To (on Disc Navigation) ...............................128
H
Hand strap ........................................................34
Howling ....................................................79, 153
I
Information display mode ....................................55
Infrared receiver ................................................37
Infrared sensor ................................................153
Initial Setup ......................................................97
L
Language .........................................................98
Laser pickup block ...........................................153
Lens cap ..........................................................35
Lens cap string attachment hole ..........................35
Lock ..............................................................115
Lock switch .......................................................53
Low Light (Programme AE) .................................86
N
Normal Menu ................................................... 83
O
Optical 10× zoom lens ....................................... 59
Optical 16x zoom lens ....................................... 59
OSD Output ..................................................... 94
P
Play (play list) ................................................. 122
Play (programme) ........................................... 119
Play list ......................................................... 121
Add scenes ............................................ 123
Add scenes (submenu) ............................ 124
Create ................................................... 121
Delete ................................................... 127
Delete scenes ......................................... 124
Delete scenes (submenu) ......................... 125
Move ..................................................... 126
Play ....................................................... 122
Select scenes (submenu) ......................... 125
Switch ................................................... 122
Title ....................................................... 127
Portrait (Programme AE) .................................... 85
Power Save ...................................................... 97
Power switch .................................................... 47
Programme .................................................... 118
Play ....................................................... 119
Switch ................................................... 118
Title ....................................................... 119
Programme AE ................................................. 85
Protect Disc ................................................... 130
Q
Quality (Card) ................................................... 93
Quick Menu ...................................................... 66
QUICK MENU button ......................................... 67
R
Record button ................................................... 52
Recording indicator ........................................... 98
Remote control ................................................. 36
Repeat Play ................................................... 133
Reset .............................................................. 99
settings .................................................... 99
system ................................................... 170
RESET button ................................................ 170
Skip ....................................................... 112
Searching for image .......................................... 62
Select (Scene) ................................................ 103
SELECT button ............................................... 103
Self Timer ........................................................ 93
Shoulder Strap ................................................. 35
Skip (Scene) .................................................. 112
Skip playback ................................................... 63
Slide Show ..................................................... 134
Sports (Programme AE) ..................................... 85
Spotlight (Programme AE) .................................. 85
STD (VIDEO Mode) ........................................... 90
Stereo microphone ............................................ 53
Submenu ....................................................... 108
Switch (play list) .............................................. 122
Switch (programme) ........................................ 118
T
Tele-conversion lens .......................................... 60
Thumbnail ...................................................... 101
Title (play list) ................................................. 127
Title (programme) ........................................... 119
U
UDF2.01 format ...................................... 146, 154
Update Control Info. ........................................ 131
V
Video flash ....................................................... 78
VIDEO Mode .................................................... 90
FINE ....................................................... 90
STD ........................................................ 90
XTRA ...................................................... 90
Video selector .......................................... 92, 154
Vol. button ........................................................ 61
W
White Bal. ........................................................ 87
White fade ..................................................... 111
Wide conversion lens ......................................... 60
Wipe fade ...................................................... 111
X
XTRA (VIDEO Mode) ........................................ 90
Z
Zoom lever ....................................................... 59
S
Sand & Snow (Programme AE) ........................... 85
Scene
Combine ................................................ 110
Delete ................................................... 107
Detail ..................................................... 117
Divide .................................................... 109
Fade ...................................................... 111
Move ..................................................... 126
Select .................................................... 116
175
English
M
MF .................................................................. 74
MIC.Filter ......................................................... 89
Move ............................................................. 126
English
Be sure to read the following before opening
the package of CD-ROM
This Agreement will take effect at the moment you open the package of the storage device (CD-ROM) provided
with this product, if you agree to the terms herein.
If you do not accept the terms of this Agreement, immediately return the unopened package of storage medium
and enclosed materials (printed matter, external package, and all others) to your dealer, or return only the package
of storage medium to your dealer.
Consult your dealer for any refund on the unused product. However, if only the package of storage medium is
returned, no refund is possible.
This Licence Agreement certifies that you were granted licence in the past.
Licence Agreement
Article 1 Grant of Licence
Hitachi, Ltd. grants you the following rights for the following products (to be referred to as “This Software”
hereafter) that you have obtained with this Agreement:
(a) You may use This Software only on a single piece of equipment. However, if this equipment cannot be used
because of mechanical problem, you may temporarily use This Software on another piece of equipment.
(b) Although This Software contains several components that can be run on computer as independent functions, all
components are licensed as a single product: You may not, by any means, use these components on different
computers at the same time.
Article 2 Copyrights
The copyrights of This Software, attached manual, etc. are owned by Matsushita Electric Industrial Co., Ltd., and
are protected by copyright laws in Japan and USA, as well as by other intellectual property and international
properties:
Article 3 Other Rights and Limitations
(a) You may not copy This Software or any of the printed materials attached, except for duplications to provide
back-up or storage.
(b) Use of This Software by third parties is prohibited, whether by transferring, renting, leasing, lending, moving,
or any other measures.
(c) You may not decompile or disassemble this Software.
(d) Duplication and/or distribution of any files on this storage medium for commercial use is prohibited.
Article 4 Quality Assurance
Under no circumstances will Hitachi, Ltd., Matsushita Electric Industrial Co., Ltd. accept any responsibility for any
damages you may incur from using or being unable to use This Software (including, but not limited to, loss of
business profit, interruption of business, loss of business information, or other monetary damages).
Article 5 Termination of Agreement
If you fail to comply with the terms of this Agreement, Hitachi, Ltd., Matsushita Electric Industrial Co., Ltd. reserve
the right to terminate the Agreement. In such a case, you will be obliged to discard all copies of This Software and
its components.
Article 6 Prioritised Licence Agreement
When some software programmes are installed, the licence agreements will be displayed (to be referred to as online
licence agreement).
If the online licence agreement conflicts with this Agreement, the online licence agreement shall have a priority.
176
SOME DO’S AND DON’TS ON THE
SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
★★★★★★★★★★
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections
between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions.
Switch off and withdraw the mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on equipment.
★★★★★★★★★★
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is
damaged in any way — switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is
designed for unattended operation or has a standby mode. Switch off using the switch on the equipment
and make sure that your family know how to do this. Special arrangements may need to be made for infirm
or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the
requirements of traffic safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always
fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
— NEVER let anyone especially children push anything into holes, slots or any other
opening in the case — this could result in a fatal electrical shock;
— NEVER guess or take chances with electrical equipment of any kind
— it is better to be safe than sorry!
★★★★★★★★★★
PLEASE PHOTOCOPY AND DISPLAY
Used correctly, domestic batteries are a safe and dependable source of
portable power. Problems can occur if they are misused or abused —
resulting in leakage or, in extreme cases, fire or explosion.
Here are some simple guidelines to safe battery use designed to eliminate
any such problems.
ALWAYS
ALWAYS
GUIDELINES
Take care to fit your batteries correctly,
observing the plus and minus marks on the
battery and appliance. Incorrect fitting can
cause leakage or, in extreme cases, fire or
even an explosion.
Replace the whole set of batteries at one
time, taking care not to mix old and new
batteries or batteries of different types, since
this can result in leakage or, in extreme
cases, fire or even an explosion.
ALWAYS
ALWAYS
NEVER
Store unused batteries in their packaging
and away from metal objects which may
cause a short-circuit resulting in leakage or,
in extreme cases, fire or even an explosion.
Remove dead batteries from equipment and
all batteries from equipment you know you
are not going to use for a long time.
Otherwise the batteries may leak and cause
damage.
Never dispose of batteries in fire as this can
cause them to explode. Please put dead
batteries in with the normal household
waste.
NEVER
ALWAYS
ALWAYS
Never attempt to recharge ordinary
batteries, either in a charger or by applying
heat to them. They may leak, cause fire or
even explode. There are special
rechargeable batteries which are clearly
marked as such.
Supervise children if they are replacing
batteries themselves in order to ensure
these guidelines are followed.
Remember that small button cell batteries
such as used in some hearing aids, toys,
games and other appliances, are easily
swallowed by young children and this can be
dangerous.
ALWAYS
ALWAYS
ALWAYS
Keep loose button cells away from young
children.
Make sure battery compartments are
secure.
Seek medical advice if you believe a cell has
been swallowed.
BATTERY
SAFETY
PUBLISHED BY THE BRITISH BATTERY MANUFACTURERS ASSOCIATION 7 BUCKINGHAM GATE, LONDON SW1E 6JS
Hitachi, Ltd. Tokyo, Japan
International Sales Division
THE HITACHI ATAGO BUILDING,
No. 15 –12 Nishi Shinbashi, 2 – Chome,
Minato – Ku, Tokyo 105-8430, Japan.
Tel: 03 35022111
HITACHI EUROPE LTD,
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire
SL6 8YA
UNITED KINGDOM
Tel: 01628 643000
Fax: 01628 643400
Email: consumer -service@hitachi-eu.com
HITACHI EUROPE S.A.
364 Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens
GREECE
Tel: 1-6837200
Fax: 1-6835964
Email: service.hellas@hitachi-eu.com
HITACHI EUROPE GmbH
Munich Office
Dornacher Strasse 3
D-85622 Feldkirchen bei München
GERMANY
Tel: +49-89-991 80-0
Fax: +49- 89-991 80-224
Hotline: +49-180-551 25 51 (12ct/min)
Email: HSE- DUS.service@hitachi-eu.com
HITACHI EUROPE S.A.
Gran Via Carlos III, 86, planta 5
Edificios Trade - Torre Este
08028 Barcelona
SPAIN
Tel: +34 93 409 2550
Fax: +34 93 491 3513
Email: atencion.cliente@hitachi-eu.com
HITACHI EUROPE srl
Via Tommaso Gulli N.39, 20147
Milano, Italia
ITALY
Tel: +39 02 487861
Tel: +39 02 38073415 Servizio Clienti
Fax: +39 02 48786381/2
Email: customerservice.italy@hitachi-eu.com
HITACHI Europe AB
Box 77 S-164 94 Kista
SWEDEN
Tel: +46 (0) 8 562 711 00
Fax: +46 (0) 8 562 711 13
Email: csgswe@hitachi-eu.com
HITACHI EUROPE S.A.S
Lyon Office
B.P. 45, 69671 BRON CEDEX
FRANCE
Tel: +33 04 72 14 29 70
Fax: +33 04 72 14 29 99
Email: france.consommateur@hitachi-eu.com
HITACHI EUROPE LTD (Norway) AB
STRANDVEIEN 18
1366 Lysaker
NORWAY
Tel: 67 5190 30
Fax: 67 5190 32
Email: csgnor@hitachi-eu.com
HITACH EUROPE AB
Egebækgård
Egebækvej 98
DK-2850 Nærum
DENMARK
Tel: +45 43 43 6050
Fax: +45 43 60 51
Email: csgnor@hitachi-eu.com
HITACHI EUROPE AB
Neopoli / Niemenkatu 73
FIN-15140 Lahti
FINLAND
Tel : +358 3 8858 271
Fax: +358 3 8858 272
Email: csgnor@hitachi-eu.com
Hitachi Europe Ltd
Bergensesteenweg 421
1600 Sint- Pieters-Leeuw
BELGIUM
Tel: +32 2 363 99 01
Fax: +32 2 363 99 00
Email: sofie.van.bom@hitachi-eu.com
HITACHI EUROPE LTD
Na Sychrove 975/8
101 27 Pr aha 10 – Bohdalec
CZECH REPUBLIC
Tel: +420 267 212 383
Fax: +420 267 212 385
Email: csgnor@hitachi-eu.com
www.hitachidigitalmedia.com
Download PDF

advertising