User manual | AOC 712SI Computer Monitor User Manual

AOC 712SI Computer Monitor User Manual
Designer Collection
Diamante
a brilliantly cut gem
°
°
°
°
°
°
°
°
°
°
°
°
°
wall canopy rangehood
sleek styling
600 cfm PRO motor
Silent Kit noise reduction
2 halogen lights for 30”
3 halogen lights for 36” and 48”
3 speed push button controls
stainless steel baffle filters
modified pro depth
convertible to ductless*
Easy Cube mounting system
sone range: 3.5 - 6.5
6” round duct
* it is highly recommended that
professional style cooking always
be vented to the outside.
A streamlined shape combined with traditional
styling makes the Diamante an updated alternative
in canopy ventilation. To add subtle sparkle, the
corners of the canopy and the chimney are angled
in a diamond-like cut.
Size/Color/Model #
30 Stainless
36 Stainless
48 Stainless
a
c
c
e
s
s
o
r
i
e
s
630001087
630001088
630001648
24” High Backsplash
24” high, mounts to the wall beneath
the rangehood for a coordinated look
30 x 24 Stainless
36 x 24 Stainless
pro-style baffle filters with European flair
and a built-in grease control system; bright
halogen lights encircled by a stainless trim
6098835
6098815
30” High Backsplash
30” high, mounts to the wall beneath
the rangehood for a coordinated look
30 x 30 Stainless
36 x 30 Stainless
620000095
620000096
High Ceiling Chimney Kit
One 40” upper chimney to replace 16 1/8”
upper chimney that came with hood
Stainless
620000071
Ductless Conversion Kit
Includes: • Lower Chimney with holes for ducting • Ductless Diverter Assembly • Vent Grates
• Charcoal Filter
Stainless
620000072
Replacement Charcoal Filter 620000041
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
Dimensional Diagrams
Ducted
Ductless
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
5 1/8” min
16 1/8” max
upper
chimney
cover
21 1/4”
lower
chimney
cover
22"
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
36”
10" min
16 1/8” max
For ducted installations, the
chimneys can be adjusted for
ceilings between 7’ 5 3/4”
and 8’ 10 3/4” depending
on the distance between
the bottom of the hood and
the cooktop (distance x in
Ducted diagram).
canopy
3 3/8”
x
Ducted
min & max ceiling height examples
x = 24"
min
7' 5 3/4"
max
8' 4 3/4"
x = 26"
min
7' 7 3/4"
max
8' 6 3/4"
x = 28"
min
7' 9 3/4"
max
8' 8 3/4"
cabinet base
x = 30"
min
7' 11 3/4"
max
8' 10 3/4"
For ductless installations, the
chimneys can be adjusted for
ceilings between 7’ 11 3/8”
and 8’ 11 1/2” depending
on the distance between
the bottom of the hood and
the cooktop (distance x in
Ductless diagram).
For shorter ceilings, have
the chimney cover(s) cut at
a sheet metal shop. For
higher ceiling installations,
the High Ceiling Chimney
Kit includes a new 40”
upper chimney which would
replace the 16 1/8” upper
chimney that came with
the hood.
22"
upper
chimney
cover
ductless lower
chimney
cover
canopy
3 3/8”
22"
x
36”
Ductless
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
min & max ceiling height examples
x = 24"
min
7' 11 3/8"
max
8' 5 1/2"
x = 26"
min
8' 1 3/8"
max
8' 7 1/2"
x = 28"
min
8' 3 3/8"
max
8' 9 1/2"
x = 30"
min
8' 5 3/8"
max
8' 11 1/2"
cabinet base
Note: If 24” or 30” High Backsplash is being installed, the distance between the bottom of the hood and the cooktop (distance x in
diagram) is equal to the height of the Backsplash.
Ductless Installations*
Pre-Planning Your Installation - Important: Consult the installation
instructions before you begin installing this rangehood.
Make your ductrun as straight and short as possible. The ductrun should not exceed
35 equivalent feet if ducted with the required minimum of 6” round duct. Count 45º
angles as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure that there is a
minimum of 24” of straight duct between elbows if more than one is used. Do
not install two elbows together. If you must elbow right away, do it as far away
from the hood’s exhaust opening as possible.
WARNING!
For installations where ductwork is impossible or highly impractical, a Ductless
Conversion Kit is available. A charcoal
filter, which attaches under the blower
assembly, absorbs smoke and odors. A
ductless diverter assembly directs the air
out to a lower chimney with vent grates cut
into the sides.
* it is highly recommended that
professional style cooking always be
vented to the outside.
Rev. 06/08
Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising