AOC L15X421, L20S421, L20W421 Flat Panel Television User Manual

User's Manual
LCD TV
L15X421
L20S421
L20W421
Q41T2001673 3A
USER’S MANUAL
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------- 2
PREPARATION ---------------------------------------------------------------------4
MOUNTING THE TV BASE································································ 5
OPERATING INSTRUCTIONS -------------------------------------------------7
Use of the remote control --------------------------------------------------7
To use the menus ------------------------------------------------------------8
Main menu ---------------------------------------------------------------------8
CONNECT PERIPHERAL EQUIPMENT -------------------------------------16
Front Panel Control Knobs -------------------------------------------------16
Preparation --------------------------------------------------------------------17
Video recorder ----------------------------------------------------------------18
DVD player ---------------------------------------------------------------------19
Camera, camcorder, Video Game set -----------------------------------19
Headphone --------------------------------------------------------------------20
Tips ------------------------------------------------------------------------------21
PRODUCT SPECIFICATION ---------------------------------------------------22
BEFORE CALLING SERVICE --------------------------------------------------24
0
Glossary ------------------------------------------------------------------------25
Thank you very much for choosing the LCD TV.
We recommend that you take a few minutes to read carefully through this
manual before installing and switching on the TV. Please keep this manual in
a safe place for your future reference.
SAFETY: Lamp Disposal
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST
BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE
ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.
SYMBOL
SA 1965
SA 1966
SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightning flash with
arrowhead symbol, within an equilateral triangle,is intended
to alert the user to the presence of insinuated “dangerous
voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock
to persons.
INSTRUCTIONS: The exclamation point within an
equilateral triangle is to alert the User to the presence of
important operating and maintenance (servicing) instruction
in the literature accompanying the appliance.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, Such as vases, Shall be placed on the apparatus.
Caution - Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
1
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with
the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and third grounding prong. The wide
blade or third prong is provided for your safety. When the provided plug
does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
2
13. The TV should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supplied to your
home, consult your dealer or local power company.
14. Unplug this apparatus during lightning storms or when unused for long
periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
16. This product may contain lead or mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org
17. Damage Requiring Service – The appliance should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
18. Tilt/Stability – All televisions must comply with recommended
international global safety standards for tilt and stability properties of its
cabinets design.

Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet, which could ultimately
overturn the product.

Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product
damage and/or personal injury.
19. Wall or Ceiling Mounting – The appliance should be mounted to a wall
or ceiling only as recommended by the manufacturer.
20. Power Lines – An outdoor antenna should be located away from power
lines.
21. Outdoor Antenna Grounding – If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Cord, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats and
supporting structure grounding of the lead-in wire to an antennadischarge unit, size of grounding connectors, location of antennadischarge unit, connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
3
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE
Note to the CATV system installer: This reminder is provided to call the
CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the adapter!
22. Objects and Liquid Entry – Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through openings.
4
PREPARATION
1. Place the TV on a solid surface.
Ensure that the TV is placed in a position to allow free flow of air. Do not
cover the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as
lighted candles, should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water. The equipment
shall not be exposed to dripping or splashing.
2. Insert the aerial plug firmly into the aerial socket at the back of the TV.
Note: L20S421 has the handle at the back of the TV.
5
MOUNTING THE TV BASE
The TV base will be separated with the TV unit. You should Install the base
before you use the TV unit.
 Place the TV on its face on a soft blanket.
 Install the base stand with three screws.
 Place the TV on the table.
Note: L15X421 does not need the screws to install.
6
3. Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries
supplied (Type AAA 1.5V).
4. Power:
Insert the power cord in the wall socket having an AC power supply.
5. Turn the TV on:
Turn the main power switch on the right side of TV to ON.
Press the secondary power button in front of the TV to turn it on.
When the TV is ON, the LED may be green or Red When LED is green,
the TV is working; when LED is Red, the TV is in idle mode for energy
saving or Power Off. When pull out AC Power Cable or AC Power Switch
Off, LED is Off.
OPERATING INSTRUCTIONS
7
USE OF THE REMOTE CONTROL
MUTE
POWER
Temporarily interrupt the
sound or restore it.
Press to turn on/off the
TV. The TV is never
completely powered off
unless it is physically
unplugged.
DISPLAY
Press this button to
Display Channel number
on the right-top corner.
0~9/100 Digit buttons
To select a TV channel.
CH
Press or ( or ) to
browse through the TV
channels,which are not
erased. To view a blocked
channel, use the digital
buttons to access,the
channel and enter your
access code.
MTS /SAP
Press this key to activate
Multichannel Television
Sound, Stereo or Mono
sound.
PRE-CH
To display the previously
selected TV channel.
VOL
TV/VIDEO
Press + or – to adjust the
volume.
Select your input source:
press repeatedly to select
TV, AV, S-VIDEO, PC.
PC
Press this button to turn PC
mode
CAPTION
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from
5,10,15,20,25…120
minutes.
PIP
Not Supported.
POP
Not Supported.
MENU
Press repeatedly to
display OSD menu.
V-CHIP
Press this button to
setup parental
control.
SWAP
Not Supported.
SIZE
Press this button to
turn Auto,Normal,
Expand, Compress,
Amaronap.
8
Press this button to turn
Closed Caption on.
Be sure you have
selected Caption On in
the Setup menu.
Up & Down
Press Up and Down
we Can select the submenu
Left & Right
Press Left and Right ,we can
Change the Setting of
submenu
TO USE THE MENUS
1.
2.
3.
4.
Press the MENU button to display or close main menu.
Use the cursor up/down to select a menu item.
Use the cursor left/right to enter a submenu or enable/disable the
function.
Press the MENU button to exit the menu.
MAIN MENU
Press the MENU button to enter the main OSD (On Screen Display). Adjust
the items including Picture Setup, Sound setup, Child Lock Setup, Function
Setup and TV setup. When the input source is PC or Component mode, only
the Sound Setup, Picture Setup and Menu Setup can be selected; shown in
the figure below:
When the input source is AV or S-Video mode, the Sound Setup, Picture
Setup, Child Lock Setup and Function Setup can be selected; shown in the
figure below:
9
When the input source is TV mode, the Sound Setup, Picture Setup, Child
Lock Setup, Function Setup and TV Setup can be selected; shown in the
figure below:
Sound Setup (Same as in PC, TV, AV1, S-Video and Components modes)
1. The range of adjusting volume, bass and treble is from 0~100.
2. Select “ON” or “OFF” in sound selection to control the sound output.
3. The range of adjusting Balance is -50~+50; when adjusting from 0 to -50,
the sound from the left track fades until silence; when adjusting from 0
to +50, the sound from the right track fades until silence.
4. AVL: you can set it “ON” or “OFF”.
The function is to adjust the input sound automatically. You may enable
this function when you notice that the sound in the two tracks are very
different, in order to prevent the bad sound effect resulting from large
sound variation.
5. Select "ON" or "OFF" for Loudness: a default setting is preset, you may
adjust when necessary.
The following menu will appear when selecting continuously:
6.
7.
8.
Preset: Designed for different types of sound output, wherein, the
dialogue, music and theater modes are preset; you can set Bass, Treble
and Equalizer in sound output mode according to your preference.
Equalizer: You can select and adjust 100, 300, 1K, 3K and 8K
respectively (the figures represent the sound frequency range).
Reset to default: Reset the sound setting to the factory default value.
10
Picture Setting
When the input source is in PC mode, you can select Brightness, Contrast,
Position, Video noise, Sharpness, Auto Adjust, Info, Colour Temp., Red,
Green, Blue and Reset to default; shown in the figure below:
1.
2.
3.
4.
5.
6.
7.
8.
Brightness and Contrast: The range can be adjusted from 0~100.
Position: There are two options, Horizontal and Vertical, which can be
adjusted from -50 to +50.
Video noise: There are two options, Phase and Clock, which can be
adjusted from -50 to +50.
Sharpness: Select from five options of Softest, Soft, Auto, Sharp and
Sharpest. You may adjust the above options according to your
preference.
Auto Adjust: Automatically adjust PC input to the optimal screen size.
Info: Prompt the current size for PC input definition (only the definition
that can be shown by this device).
Colour Temp.: There are four options of colour temperature provided for
users - 6500, 7300, 9300 and Personal. You can select the three colour
temperatures of 6500, 7300 and 9300, or manually adjust red, green or
blue in the personal setting (you can only adjust red, green and blue in
the personal setting).
Reset to default: It is used to reset the picture settings to the factory
default mode.
11
When the input source is in TV/AV1/S-Video/ mode, you can select
Brightness, Contrast, Colour, Sharpness, Tint, Dyn. skin tone, Colour Temp.,
Public, Zoom and Reset to default respectively; shown in the figure below:
When the input source is in Component mode, you can select Brightness,
Contrast, Colour, Sharpness, Tint, White tone, Size and Reset to default
respectively; shown in the figure below:
1.
2.
3.
Brightness and Contrast: The range can be adjusted from 0~100; use
Brightness and Contrast options to adjust the brightness of picture.
Colour: The range can be adjusted from 0~100; use this option to adjust
the colour saturation of picture.
Sharpness: Select from five options of Softest, Soft, Auto, Sharp and
Sharpest. You can adjust the sharpness of picture using any option
above.
12
4.
5.
6.
7.
8.
Tint: The range can be adjusted from -50~+50; use this option to adjust
the colour of picture.
Dyn. Skin tone: When the Dynamic skin tone is ON, the skin tone of
person in the picture becomes more vivid.
Colour Temp.: There are three options of colour temperature provided
for users - warm, normal and cold.
Size: There are various functions provided for zoom in/zoom out.
Reset: It is used to reset the picture settings to the factory default mode.
Function Setup
When the input source is in TV, AV1 or S-Video mode, you can select
Source OSD, Language, Child lock, Timers, CC Mode and Reset to default;
shown in the figure below:
1.
2.
3.
Current Source OSD setting: When OSD is set to ON, the left upper
corner of the display will show the input source or the TV channel
number; when OSD is set to OFF, the input source or the TV channel
number will disappear.
OSD language setting: There are six language options provided English, French, German, Spanish, Portuguese and Traditional Chinese.
Child Lock Setup;
(1). You can enter the V-Chip level setting only when the Child Lock is
ON, and the V-Chip will be enabled; you can not enter V-Chip level
setting when the Child Lock Setup is OFF, and the V-Chip is
disabled.
(2). Lock code: V-Chip password can be set up when the code is locked.
Enter the 4-digit password which you choose! The factory default
password is 0000.
13
4.
5.
6.
Sleep Timer: Set the sleeping timer and the alert function which
indicates the time left.
Closed Caption (CC) setting: Select CC1~CC4, TXT1~TXT4 or OFF.
Reset: It is used to reset the OSD settings.
When the input source is in PC or Component mode, you can select Source
OSD, Language, Timers and Reset to default; shown in the figure below:
Source OSD, Language, Timers and Reset to default options are operated
similarly as the above instructions!
Child Lock
When the input source is in TV, AV1 or S-Video mode, V-Chip level can be
set. You can enter the Child Lock setting only when the Child Lock is ON.
When you enter the Child Lock setting, a message on the display will prompt
you to enter password:
14
You can enter the Child Lock setting to set up the V-Chip level when you
enter the correct password:
1.
3.
Age: it may be set to Child, Teenager, Youth, Adult, Custom or OFF;
when you select Custom, it can be set according to you preference.
MPAA Rating: Select the movie ratings from low to high (alert) - G, PG,
PG-13, R, NC-17, X and F.
PG Rating: Shown in the figure below:
4.
The empty box refers to unlocked; the solid box refers to locked.
Reset to default: Reset to the factory default value.
2.
TV Setting
The following menu appears only in the TV mode.
15
1.
2.
3.
4.
5.
6.
7.
8.
Channel nr: Shows the current channel number.
Tuning mode: Select the mode of TV signal - Cable\HRC Cable\IRC
Cable\ Broadcast.
System standard: NTSC-M, Auto.
Auto search: Select "Auto Search" to search all signaled channel; when
the searching is complete, it stays at the first channel with signal and all
channels that have been located are stored. If you would like to stop
"Auto Search" during the process, simply by pressing the function button.
Fine tune: NTSC-M is seldom used.
AFC can be set to ON or OFF. When it is set to ON, the TV will search
the TV signal automatically; when there is any offset in the signal, it will
automatically adjust the channel to the correct position.
Skip can be set to ON or OFF. When it is set to ON, a channel can be
skipped by pressing the switching button on the remote control or on the
front panel.
Reset to default: Reset to the factory default value.
16
CONNECT PERIPHERAL EQUIPMENT
FRONT PANEL CONTROL KNOBS
Power Key? : Press to turn on or off the TV.
MENU Key? : Press to show the OSD menu and exit OSD menu at the TV.
Down / Up Key? ? : Select the intended function by pressing these two
keys, or switch the channels in the TV mode.
+ /- Key? ? : Press to confirm your function selection and adjustment volume.
Source Key? : Press to select your input source.
There is a wide range of video and audio equipment that can be connected to
your TV. The following connection diagrams show you how to connect them.
17
PREPARATION
Remove the back plate at the back of the TV as shown on the illustration
opposite. Lay the LCD TV with the screen down on a table, as it will be
easier to connect your peripheral equipment. Please take precaution not to
damage the screen.
1: VGA audio input
2: VGA input
3: AC power input terminal
4: Headphone outlet
5: AV signal input
6: Left video/audio track input
7: Right video/audio track input
8: S-Video signal input
9, 10 and 11: Pr Pb Y Component signal input
12: Y Pb Pr left audio track input
13: Y Pb Pr right audio track input
14: TV signal input
Note: L15X421 have the power switch beside the AC socket on the back
cover.
VGA: Receive the signals from the host, which is used as the display of the
computer.
AV: Receive the video/audio signals of the NTSC standards.
S-VIDEO(S-VHS): i.e. video Y/C component. Receive the HD Y/C
component signal.
Y Pb Pr: The modes it supports are HD signals such as 480i, 480p, 720p
and 1080i.
TV : Receive the TV signals of NTSC-M standard.
18
VIDEO RECORDER
How to connect
1. Connect the supplied antenna cable to the RF IN port of your VCR.
2. Connect another FR cable from the port of your VCR to the antenna port
of you TV set. If you have connected the video/audio cable to the video
AV port, you may have better sound and picture when playing the VCR .
If your VCR has an S-VHS video jack:
For improved picture quality, connect a S-Video cable with the S-VIDEO
input on the TV.
S-Video does not provide audio, audio cables must still be connected to
provide sound(AV and S terminal share one audio input).
Watching VCR
1.
2.
3.
If you use connection TV, select the TV channel auto search.
If you use connection AV, select video AV input.
Insert videotape in the VCR and press the PLAY button.
19
DVD PLAYER
How to connect
1. Connect 3 separate components signal cables to the Y, Pb and Pr ports
of the component signal of the DVD player, and the Y, Pb and Pr ports of
the component signal of theTV set.
2. Connect the audio cable to the audio output port of the DVD player and
the audio input port of the component signal of the TV set.
How to use
1. Select COMPONENT.
2. Turn on the DVD set.
CAMERA CAMCORDER VIDEO GAME SET…
How to connect
1. Connect the camera, camcorder and game set to the ports of the
audio/video set.
2. The camcorder may get better picture by connecting a S-VHS cable
between the S terminal and the Audio set.
How to use it
1. Select the video AV or S terminal input.
2. Enable the exterior AV equipment.
Warning: In case you notice scrolling images, wrong colors or no color, no
picture or even combinations of these, on your screen, check if the
connections are done in the right way. Check if the cable colors match with
the Input connector colors.
20
DIGITAL SET TOP BOX
Connect the top box to the input port of the component signal.
How to connect
1.
2.
Connect 3 separate component signal cables to the Y, Pb and Pr ports
of the component signal of the Digital TV/ Top Box, and the Y, Pb and Pr
ports of the component signal of theTV set.
Connect the audio cable with the audio port of the Digital TV/Top Box
and the audio port of the TV set.
How to use
1.
2.
Select COMPONENT.
Turn on the DVD set-Top box set.
Warning: In case you notice scrolling images, wrong colors or no color,
no picture or even combinations of these, on your screen, check if the
connections are done in the right way. Check if the cable colors match
with the Input connector colors.
HEADPHONE
1.
2.
3.
The headphone jack is located at the rear corner of the TV.
The MUTE key on the remote control works on both internal speaker
and the headphone.
Use volume key to adjust the volume.
21
TIPS
Care of the screen
Do not rub or strike the screen with anything hard as this may scratch, mar,
or damage the screen permanently.
Unplug the power socket before cleaning the screen. Dust the TV by wiping
the screen and the cabinet with a soft, clean cloth. If the screen requires
additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or
aerosol cleaners.
Mobile telephone warning
To avoid disturbances in picture and sound, malfunctioning of your TV or
even damage to the TV, keep away your mobile telephone from the TV.
End of life directives
We are paying a lot of attention to produce environmentally friendly in green
focal areas. Your new receiver contains materials which can be recycled and
reused.
At the end of its life specialized companies can dismantle the discarded
receiver to concentrate the reusable materials and to minimize the amount of
materials to be disposed of.
Please ensure you dispose of your old receiver according to local regulations.
22
Product Specification
Function
15" Screen (L15X421)
Item
LCD Panel
Spec
Screen Size
15” TFT-LCD Panel
Aspect Ratio
4:3
Resolution
1024*768 (XGA)
Display Area (opening)
304.128(H) × 228.096(V)
HxV
Pixel Pitch
0.297mm x 0.297mm
Display Clors
16.2 million
Lamp Type/Life
60000 hr
Color Temperature
VGA Function
TV Function
Video Input
Cool / Warm/Normal
Input support definition 1024*768 /60Hz
Mini jack for stereo headphones
Audio input
(3.5ø)
TV Standard
NTSC M
Sound System
MTS、SAP
Colour systems
NTSC
AV
RCA x 1
Audio L/R x 1
S-VIDEO
S-Videox 1
Component
YPbPr x 1
23
Audio L/R x 1
Speaker (built-in): Two 2 watt
speakers
Audio
output
Audio output: L / R
OSD
Language
English. French. German. Spanish. Portuguese.
Traditional Chinese
Headphone Mini-jack for stereo (3.5ø)
Table Stand Yes
Wall Mount VESA 100 x 100 mm
Power
Panel Tilt
Power
AC100V-240V, 50/60Hz
Power Consumption
<55W
Forwards/Backwards/
Rotation
-4°/ +18° / ± 35°
Temperature
+ 0 °C ~ + 40 °C
Environment storage
operating
Dimension W x H x D (with stand)
- 25 °C ~ + 60 °C
10% ~ 85%
498 x 495 x 180 (mm)
Net weight
Without accessory
4.0Kg
Accessory
Remote controller, Batteriesx2, Power cord, Signal Cable,
Audio Cable, User manual
24
Function
20" Screen(L20S421)
Item
LCD Panel
VGA Function
TV Function
Video Input
Spec
Screen Size
20” TFT-LCD Panel
Aspect Ratio
4:3
Resolution
640 x480 (VGA)
Display Area (opening)
408mm x 306mm
HxV
Pixel Pitch
0.21mm x 0.63mm
Display Colors
16.2 million
Lamp Type/Life
50000 hr
Color Temperature
Cool / Warm/Normal
Input support definition 640*480 /60Hz
Mini jack for stereo headphones
Audio input
(3.5ø)
TV Standard
NTSC M
Sound System
Colour systems
AV
MTS、SAP
NTSC
RCA x 1
S-VIDEO
S-Videox 1
Component
YPbPr x 1
25
Audio L/R x 1
Audio L/R x 1
Speaker (built-in): Two 3 watt
speakers
Audio
output
Audio output: L / R
OSD
Language
English. French. German. Spanish. Portuguese.
Traditional Chinese
Headphone Mini-jack for stereo (3.5ø)
Table Stand Yes
Wall Mount VESA 100 x 100 mm
Power
Panel Tilt
Power
AC100V-240V, 50/60Hz
Power Consumption
<70W
Forwards/Backwards/
Rotation
-4°/ +18° / ± 35°
Temperature
+ 0 °C ~ + 40 °C
Environment storage
operating
Dimension W x H x D (with stand)
- 25 °C ~ + 60 °C
10% ~ 85%
498 x 495 x 180 (mm)
Net weight
Without accessory
9.7 Kg
Accessory
Remote controller, Batteriesx2, Power cord, Signal Cable,
Audio Cable, User manual
26
Function
20" Screen(L20W421)
Item
LCD Panel
Spec
Screen Size
20” TFT-LCD Panel
Aspect Ratio
16 : 9
Resolution
1366 x768 (WXGA)
Display Area (opening)
444.633mm x249.984mm
HxV
Pixel Pitch
108.5um x325.5um
Display Clors
16.2 million
Lamp Type/Life
50000 hr
Color Temperature
Cool / Warm/Normal
Could support to 1366*768
This product could only support to
Input support definition 60Hz, ‘Input out of range’ will
VGA Function
displayed when the input vertical
frequency out of 60Hz
Mini jack for stereo headphones
Audio input
(3.5ø)
TV Standard
NTSC M
TV Function Sound System
MTS、SAP
Colour systems
NTSC
AV
RCA x 1
Audio L/R x 1
Video Input S-VIDEO
S-Videox 1
Component
YPbPr x 1
27
Audio L/R x 1
Speaker (built-in): Two 3 watt
speakers
Audio
output
Audio output: L / R
OSD
Language
English. French. German. Spanish. Portuguese.
Traditional Chinese
Headphone Mini-jack for stereo (3.5ø)
Table Stand Yes
Wall Mount VESA 100 x 100 mm
Power
Panel Tilt
Power
AC100V-240V, 50/60Hz
Power Consumption
<90W
Forwards/Backwards/
Rotation
-4°/ +18° / ± 35°
Temperature
+ 0 °C ~ + 40 °C
Environment storage
- 25 °C ~ + 60 °C
operating
10% ~ 85%
Dimension W x H x D (with stand)
546 x 445 x 185 (mm)
Net weight
Without accessory
7.5 Kg
Accessory
Remote controller, Batteriesx2, Power cord, Signal Cable,
Audio Cable, User manual
Before Calling Service
Please make these simple checks before calling service. These tips may
save you time and money since charges for receiver installation and
adjustments of customer controls are not covered under your warranty.
Symptoms
“Ghost ” or double
image
Items to Check and Actions to follow
*This may be caused by obstruction to the
antenna due to high rise buildings or hills.
28
No power
No picture
Good picture but no
sound
Good sound but poor
color
Poor picture
Snowy picture and
noise
Horizontal dotted line
Television not
responding to remote
control
Using a highly directional antenna may
inprove the picture.
*Check that the TV’s AC power cord is plugged
into the mains socket.
*Unplug the TV, wait for 60 seconds. Then reinsert plug into the mains socket and turn on
the TV again.
*Check antenna connections at the rear of the
TV to see if it is properly connected to the TV.
*possible broadcast station trouble. Try another
channel.
*Adjust the contrast and brightness settings.
*Check the V-Chip control. Some V-Chip
modes could block the screen.
*Increase the VOLUME.
*Check that the TV is not muted; press the
button on the remote control.
*Adjust the contrast, color and brightness
settings.
Adjust TV
Mode”AIR”or”CATV”.”HRC”.”IRC”,check that
is ok or not.
*Sometimes, poor picture quality occurs when
having activated an S-VHS camera or
camcorder connected and having connected
another peripheral at the same time. In this
case switch off one of the other peripherals
*Check the antenna connection
*This may be caused by electrical interference
(e.g. hairdryer, nearby neon lights, etc.)
*Turn off the equipment.
*Check whether the batteries are working.
Replace if necessary
*Clean the remote control sensor lens on the
TV.
*You can still use the buttons at the front of
your TV.
*Select the TV mode to be sure your remote
control is in the TV mode.
29
GLOSSARY
Audio / Video Inputs
Located on the rear and the front of the receiver these connectors (RCA
phono type plug) are used for the input of audio and video signals. Designed
for use with VCRs (or other accessories) in order to receive higher picture
resolution and offer sound connection options.
S-Video Input
Allows direct connection of high-resolution video sources, such as a Super
VHS videocassette recorder, Laser Disc player, etc. Provides improved
picture resolution, sharpness, and clarity.
Audio output
Provide sound output , it can be connected external speaker ,and enhance
the sound quality.
Menu
An on-screen listing of feature controls shown on the TV screen that are
made available for user adjustments.
Multichannel Television sound (MTS)
The broadcasting standard that allows for stereo sound to be transmitted
with the TV picture.
RF
Radio Frequency or modulated signal design used as the carrier for
television broadcasts.
Second Audio Program (SAP)
Another or additional audio channel provided for in the Multichannel
Television Sound (MTS) broadcast standard. A monaural soundtrack
included within the recorded or video signal (usually containing a second
language translation for the displayed program).
Sleep Timer
Function with which you can set a time period after which the TV should turn
itself off.
30