User manual | AOC LE42H09P Flat Panel Television User Manual

LED LCD TV User Manual
LE42K09D/
LE42H09P
ww w.aoc.com
2010 AOC. All Rights Reserved.
This manual is provided as an operational guide to user. All statements, technical information, and
recommendations in this manual and in any guides or related documents are believed reliable, but
the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended
to be, nor should they be understood to be,representations or warranties concerning the products
described.
1
Contents
Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating AOC TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power on/off the TV set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
First time setting. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . 18
Waste disposal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Switching between input sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
How to select on screen menu items. . . . . . . . . . . . . . . . . . . . . . . . . 19
Important safety information . . . . . . . . . . . . . . . . . . . . . . 3
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Picture Setting (For Computer source only) . . . . . . . . . . . . . . . . . . . . 21
Usage instructions . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . 4
Sound setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Features settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Packing list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TV settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Multimedia functions (USB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Control and connection . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Multimedia format supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Dimensions and specifications . . . . . . . . . . . . . . . . . . . . 29
Battery installation for the remote control . . . . . . . . . . 12
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 0
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Stand base installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Wall-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connections to TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cable system or VHF/UHF antenna system . . . . . . . . . . . . . . . . . . . . 14
HDMI connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
YPbPr connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AV signal connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Computer connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reference sheet of computer input signals . . . . . . . . . . 16
Reference sheet of computer HDMI input signals. . . . . 16
Reference sheet of audio input signals . . . . . . . . . . . . . . 16
AV system supported by TV and AV modes: . . . . . . . . . 17
2
Important information
Important safety information
Warning
2. Pay attention to all warnings.
1. Read and keep these instructions.
3. Follow all operation instructions.
4. Make sure that only proper power supply is used
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
This sign is intended to warn the user that
uninsulated, dangerous voltage inside the TV
may result in electric shock.
5. Do not install the TV set in high temperature areas or
in damp places or dusty places or places affected by
mechanical shock.
6. Do not block any ventilation vent to prevent high
temperature from forming inside. Carry out
installation in accordance with the manufacturer‘s instructions.
This sign is intended to remind the user to
follow the important operation and maintenance (service) instructions contained in
this brochure supplied with the TV set.
7. Do not install the TV set in places close to the following
heat sources such as a radiator, a collector, an oven or
other equipment generating heat, including an amplifier.
To reduce the risk of fire or electric shock, keep the TV
set away from rain or moisture and never place an object
filled with liquid such as a vase on a TV set.
Caution
To prevent electric shock, do not insert the power cord of
the TV set into the socket of an extension line. Insert the
pins of the plug into the outlet completely rather than
leaving them exposed.
8. Do not use the equipment near water.
9. If the supplied plug fails to insert into the socket, ask
an electrician to replace the old socket.
Use a wall-mounted bracket or a TV stand recommended
by our company and consult the distributor for details.
10. Prevent the power cord from being stepped on or
squeezed, especially at the plug, the outlet and the
power cord outlet of the equipment.
Use of other wall-mounted brackets or TV stands may
result in unstable installation and result in personal injury.
11. Do not use parts/accessories not designated by the
manufacturer.
Waste disposal instructions
12. Only use a cart, a stand base, a tripod or table
designated by the manufacturer or sold with the
equipment. Be sure to be cautious when moving the
equipment with a cart to avoid it being overturned,
thus resulting in personal injury.
We attach special importance to environment protection.
The TV set contains materials which can be recycled for
reuse.
After the TV set is no longer being used, professional
companies may dismantle it to produce reusable materials
and minimize materials to be disposed.The luminous tube
of the product contains mercury. Dispose of it in strict
accordance with the local regulations. Be sure to dispose
of a used TV set in accordance with local regulations.
13. Unplug the power cord of the equipment
during thunderstorms or when it will be
idle for a long time.
14. Entrust professional service personnel to carry out
maintenance. Maintenance is required in case of the
following damage: the power cord or plug is damaged,
liquid is splashed into the equipment or foreign matters enters into the equipment, the equipment
is showered by rain or gets damp, the equipment
operation becomes abnormal or the equipment has
fallen from a high position.
15. Unplug the power cord immediately when any liquid
or solid items enter into the case. Use it again after
asking professional service personnel to check it.
16. Avoid using the TV set when the ambient room
temperature is below 0℃.
17. If carrying the TV set from a cold room into a warm
room directly or the room temperature changes
abruptly, the TV set picture may become unclear or
the picture color may become abnormal owing to
steam condensation. Wait for several hours until all
steam is fully evaporated and turn on theˆ TV set.
3
Usage Instructions
Accessories
Do not use accessories not recommended by the
product manufacturer in order to avoid risks.
Installation
Wall-mount
Placement
Wall-mount brackets need to be used for
wall-mount TV sets. Be sure to ask qualified contractors to
carry out installation when using wall-mount brackets to
install or remove a TV set. Improper installation or removal of wall-mount brackets may result in TV sets falling and
severe personal injury.
It is recommended to keep a distance 3-7 times more
than the screen height from the TV set when watching
TV programs and set the TV brightness to a proper level.
Watching TV for a long time or in a dark environment
may result in eyestrain. Keep direct light from the screen
to keep the TV set picture clear. Spot lights radiating
directly from the top are recommended for use. Cover
the window facing the screen with an opaque cloth. Install
the TV set in a room in which non-reflective materials are
used on the floor and the walls.
Pay attention to the following issues when using wallmount brackets to install a TV set:
• Be sure to carry out operations according to the
operation instructions of wall-mount brackets when
installing a TV set.
• Be sure to install the wall-mount brackets supplied
with the operation instructions of wall-mount brackets.
• Do not hang the TV set on the ceiling to avoid the TV
set falling and resulting in severe personal injury.
3h~7h
h
AC power supply
Take proper measures and mount the TV set on the wall
or the base to prevent it from turning sideways.
•
•
Install the TV set close to the AC outlet.
•
Pay attention to the following when placing the TV set,
or the TV set may fall from the stand base or the wallmounted bracket, resulting in equipment damage or
severe personal injury.
•
•
•
•
•
•
•
•
•
Place the TV set on a stable level table.
Do not hang any item on the TV set. Keep children
away from the TV set.
Positions for TV set installation shall not be exposed
to extreme temperature, such as direct sunlight,
radiators, radiation ports or air conditioners.
Do not place the TV set in high temperature, sooty,
damp or dusty environments.
Do not install the TV set in positions where insects
may appear.
Do not install the TV set in positions affected by
mechanical shock.
Do not install the TV set in projecting positions such
as on or behind the bottom stand or places where
heads may touch. Otherwise, it may result in personal
injury.
•
•
•
•
•
•
•
•
•
•
Use the AC power cord designated by our company,
which is fit for local voltage.
Contact the distributor if you cannot insert the plug
into the socket completely.
Unplug the power supply if you will not be watching
TV for the upcoming days. Never pull the power cord
when unplugging the power supply.
The plug of the AC power cord should be used and
pulled out gently.
Do not place the TV set into a position where its
power cord may easily be worn or damaged.
Do not squeeze, bend or twist the power cord
excessively. If the power cord is squeezed, bent or
twisted excessively, the cord core may be exposed or
broken, making it short-circuit, thus resulting in a fire
or an electric shock.
Do not modify or damage the power cord.
Do not place any item on or around the power cord.
Do not move the TV set when the power cord is
powered on.
Keep the power cord away from heat sources.
Unplug the power cord from the outlet on the wall.
Be sure to hold the plug when unplugging the power
cord.
Do not pull the power cord.
Do not use the AC power cord supplied on other
equipments.
Only use the original AC power cord of our company
rather than those of other brands.
Outdoor use
Do not install the TV set outdoors. Keep the TV set
from the rain, otherwise it may result in a fire or an
electric shock. Do not expose the TV set to direct
sunlight to prevent it from being damaged by high
temperature.
Mobile use
•
•
•
Do not install the TV set on a vehicle.
A jolt from the vehicle may make the TV set fall,
resulting in personal injury.
Install the TV set in a position close to the AC power
socket. Do not use a socket with poor contacts. Insert the
plug into the outlet. Incomplete insertion may generate an
electric arc and result in a fire. Ask an electrician to replace
the socket.
Do not install the TV set on a ship. If seawater
is splashed into the TV set, it may result in a fire
or cause TV set damage.
Medical institutions
•
•
Pay attention to the following issues to prevent the
power cord from being damaged. If the AC power cord is
damaged, it may result in a fire or an electric shock. Please
stop using it and request the distributor or the service
center of our company to replace it.
Do not place the TV set in a place where medical
equipment is working.
Electromagnetic interference may result in
abnormality of functions of the TV and medical
equipment.
4
LED screen
•
•
•
•
•
•
•
•
•
Electric shock
Do not touch the AC power cord or the TV set with
a wet hand. Plugging in or unplugging the AC power
cord with a wet hand may result in electric shock.
Although the LED screen is manufactured by state-ofthe-art technologies, with effective pixels reaching up
to 99.99% or even higher, black spots or bright spots
such as red, blue and green may appear on the LED
screen continuously. This is the structure nature of the
LED panel rather than a failure.
As the LED screen is manufactured by state-of-theart technologies, it can attain high performance and
picture display quality. The backlight setting of the
TV is set as the maximal brightness of the TV set.
However, when no source is available under dark environments or when watching the LED TV on blank
screens, you will find that the TV brightness is uneven.
It is a normal condition rather than a failure.
Keep the LED screen surface from sunlight, or it will
damage the LED panel.
Do not push or shake the LED screen or place an
article on the TV set, as it may make the image
become uneven or the LED panel will be damaged.
The TV set picture may have spots or the picture
may become dark when the TV set is used in a cold
environment. This does not indicate that the machine
has failed. These conditions may be improved as the
temperature rises.
The screen may have shades when a still (non-moving)
image remains on the screen for a long time. It will
disappear automatically after some time.
The TV screen and the case become hot when the TV
set is turned on. This is normal.
Avoid spraying insect repellent containing volatile
substances on the screen.
Avoid long term contact with rubber or plastic
materials against the TV set.
Thunderstorm
Unplug the power cord from the outlet on the wall
and disconnect the antenna to better protect the
TV set during thunderstorms or when it will be idle
for a long time.This may prevent an electric surge
brought by lightning or power lines from damaging
the TV set.
When it is not used
If you won’t be watching TV for the upcoming
days, you should disconnect the TV set from
the AC outlet out of environmental and safety
considerations. When the TV set is turned off,
its connection to the AC power supply is not
disconnected. Unplug the power cord from the AC
outlet to disconnect the TV set from the AC power
supply completely.
Fragments
Do not throw any thing towards the TV set, as the screen
glass may be broken, resulting in severe personal injury.
Do not touch the TV before unplugging the AC power
cord if the TV screen surface is broken, or it may result in
electric shock.
Overload
The designed operation voltage of the TV set is AC
220V. Do not connect too many electric devices to
the same AC outlet so as not to cause a fire or an
electric shock.
Disposal of glass fragments and leaked liquid crystal
If the LED panel is broken, it may result in a liquid crystal
leak and glass fragments may fall scattered. Do not touch
glass fragments and hazardous liquid crystal so as not to
result in incised wounds, dermal toxicity or infection. In
addition, do not let glass fragments or leaked liquid crystal
touch the eyes or the mouth. Rinse them thoroughly with
running water and consult a doctor if glass fragments or
leaked liquid crystal touch the eyes or the mouth.
Optional equipments
Do not keep too near to the TV set when installing
optional equipments, which shall be kept at least 30
cm (1 ft.) away from the TV set. If a VCR is installed
in front of or beside the TV set, the TV set picture
may become distorted. If the TV set is near to a
device with electromagnetic radiation, picture
distortion and/or noise may occur.
Cable connection
Be sure to unplug the AC power cord when connecting
cables to secure personal safety. Be careful so that feet will
not stumble on cables, as this may damage the TV set.
5
Small accessories
Cleaning
Clean the plug of the AC power supply.
Place small accessories out of children’s reach.
Pull out the AC power supply plug and clean it regularly. If
there is too much dirt on the plug, it will absorb moisture
and its insulation property will decline, thus resulting in a
fire.
Clean the TV set screen/casing
• Unplug the AC power cord to avoid electric shock
during cleaning.
Antenna
Pay attention to the following issues when installing an
outdoor antenna, which shall be away from a high voltage
power line or other electric lamp or a circuit or positions
which may contact these power lines or circuits.
Be extremely careful not to touch this kind of power line
or circuit when installing the outdoor antenna system,
otherwise the consequence may be fatal.
Be sure to have the antenna system grounded to
prevent electric surges and static electricity from being
accumulated.
•
Clean the TV set with a soft dry cloth gently to
remove dust on the screen. Use a soft cloth dipped
with soap suds and warm water to remove stubborn
stains. Never use strong solvent such as thinners or
benzene to clean it.
•
Follow the instructions as indicated on the package if
a chemically treated cloth is used.
•
Dust will be accumulated at the ventilation hole
as time goes by. To ensure good ventilation, it is
recommended to use a vacuum cleaner to remove
dust regularly (once a month).
Antenna
Grounding
terminal
Power service
equipment
Grounding
terminal
Antenna
separation
device
Electromagnetic induction
Ground conductor
Power supply maintenance
ground point and system
Carried out with reference to the antenna grounding
procedures of the national power regulations
As the loudspeaker of the TV set contains a strong magnet
generating a magnetic field, articles easily affected by the
magnetic field should be kept away from the loudspeaker.
Batteries
•
•
•
Do not throw batteries into the fire.
Disassembly of batteries or exposing them to high
temperature may result in short circuit of batteries.
Improper replacement of batteries may result in an
explosion hazard. Only use batteries of the same or
identical type.
Sound
Disposal of waste batteries
To protect the environment, dispose waste batteries
according to the local regulations.
Unplug the power supply of the TV set if the TV set
often gives out “cracking” sounds when it is turned on.
Consult with the distributor or the service personnel.
Occasional “cracking” sounds given out by some TV sets
are normal, especially when turning on/off the TV set.
?
6
ding~
Pong~
Moving the TV set
30 cm
Move the TV set as per the specified below
Be sure to follow the following instructions to avoid
the TV set from falling and severe personal injury:
•
•
•
4 inches
10 cm
Disconnect all cables before moving the TV set.
Moving a large-size TV set needs two or more persons.
Hold the position as indicated in the figure below
when moving the TV set. Do not press the LED panel.
Install the TV set
with a stand base.
10 cm
Such a space shall be provided
at least around the TV set.
30 cm
10 cm
10 cm
Such a space shall be provided
at least around the TV set.
10 cm
Hold the bottom of the TV set firmly when moving it.
Place the palm exactly under the panel.
10 cm
Never install the TV set at a place with poor
ventilation.
Items and ventilation holes
Keep the TV set from collision, vibration or brute force
when moving it.
Do not push any type of item into the TV set via the casing
slots, otherwise such items may cause a short circuit, resulting in a fire or electric shock. Do not place any item on
the TV set.
Ventilation
Slots on the TV set are used for ventilation.To ensure
reliable operation of the TV set and prevent it from
getting overheated, be sure not to block these slots.
Moisture
Moisture and combustibles
• Avoid liquid from splashing onto the TV set. Never
place an object filled with liquid such as a vase on a
TV set.
Dust will accumulate on the TV set if improper ventilation
is provided. Pay attention to the following issues to ensure
proper ventilation:
• Do not install the TV set with the panel facing
upwards, downwards or inclined.
• Do not install the TV set inverted.
• Never cover slots with cloth or other materials.
• Do not place the TV set on the bed, sofa, carpet or
other similar surfaces to block slots.
• Do not place the TV set inside a narrow space such
as a bookstand or a built-in cabinet, unless sufficient
ventilation is provided.
Proper space shall be provided around the TV set according to the diagram as shown below. Otherwise, air
ventilation may be insufficient and result in overheating,
thus causing a fire or damaging the TV set.
30 cm
10 cm
10 cm
Such a space shall be provided
at least around the TV set.
10 cm
7
•
Do not operate the TV set with an electric wire at a
place close to a water source, such as bathtub, kitchen
sink, laundry tub, swimming pool or wet basement etc
so as not to cause a fire or an electric shock.
•
Keep the TV set dry. Never splash any kind of liquid
on the TV set. Do not operate the TV set if any liquid
or solid item enters the casing so as not to cause an
electric shock or TV set damage. Ask professional
service personnel to inspect the TV set.
•
Keep combustibles or open flame such as candle away
from the TV set to prevent a fire.
Volume adjustment
Adjust the TV set volume so as not to affect neighbors
as sound seems to be transmitted easily at night. It is
recommended to close the window or use a pair of
earphones.
is a trademark of SRS Labs, Inc.TruSurround HD
technology is incorporated under license from SRS Labs,
Inc.
Adjust the volume to an appropriate level when using
earphones to prevent overly loud sounds from impairing
your hearing.
SRS TruSurround HD™ creates an immersive, feature-rich
surround sound experience from two speakers, complete
with rich bass, high frequency detail and clear dialog.
Maintenance
Do not attempt to service the TV set on your own. Only
professional service personnel can service the TV set as
opening the case may result in high voltage electric shock
or other injury.
Through close cooperation, AOC and SRS have developed
a kind of excellent audio technology DSS Dream Surround
with independent intellectual property rights.
Functions
Simulate and create a lifelike surround stereo sound
effect.
Increase the width and depth of the sound field which has
an extremely wide optimum listening position.
Optimize the low frequency output effect of the low
power loudspeaker.
Replacement of parts
Smart zone contains voice and other contents and adjusts
the dialogue volume dynamically to ensure it is clear and
easily understood.
Be sure to request the maintenance technician to
identify in writing that the parts used by him or her are
manufacturer-designated parts identical to the original
ones if replacement of parts is required.
Optimize the bass effect of the bass loudspeaker or midloudspeaker.
Replacement of unauthorized parts may result in a fire,
or electric shock or other hazards.
Safety inspection
Motion Boost provides the clear picture reducing motion
judder commonly found in fast-paced action scenes in movie
based content by displaying 120 images per second.
Ask the maintenance technician to carry out a routine
safety inspection as per the requirements of the manufacturer after TV set maintenance is completed to
confirm that the TV set is under a safe operational state
and confirm it. Ask qualified maintenance technician to
maintain the TV set.
Thank you for purchasing this AOC high definition TV set.
The image quality you watch on the AOC TV set depends
on the signal quality you will receive.To experience the
super fine picture effects of the AOC TV set, you need to
receive high definition programs.This AOC high definition
TV set may receive and display high definition programs
according to the following means.
• High definition wireless TV broadcasting
•
High definition cable services
•
High definition satellites services
•
Blue-ray player or other peripheral devices
Please contact the cable or satellite TV supplier to acknowledge how to upgrade to high definition programs.
8
Packing list
Check the TV set and all accessories for their intactness after the packing case is opened.
User manual
AOC LED TV Set
TV
Freeze
AV
YPbPr
Picture
PC
Audio
User manual
Warranty card
Warranty card
USB
I/II
Sleep
Dispaly
Zoom
Menu
Source
VOL
CH
Back
Remote control
Batteries for remote control
9
Power cord
Control and connection
e
f
g
Touch type
h
i
Channel
a
b
c
Volume
d
Source
Menu
Power
supply
Item
Description
a YPbPr input
Used to connect the YPbPr jack and L/R jack input from other device. The YPbPr will provide
better picture quality than S terminal or composite video.
b SPDIF
Output a digital audio to the external loudspeaker or other digital audio equipment
c Antenna input
RF input used to connect the cable or VHF/UHF antenna.
Connect video output port of personal computer with an 15 pin D-sub cable. Connect separate
audio cable between PC and TV to get sound. Please refer to Reference Table for computer
signal for supported display resolution.
For some Apple Macintosh computers, adapters may be required (not provided). Connect
d Computer signal
adapters to computers before connecting HD15-HD15 cables in case of this circumstance.
input
Adjust the clock and phase settings in the menu if the picture becomes noisy, flickers or is
unclear.
e HDMI input
Connect a HDMI signal to HDMI port. The HDMI (High definition Multimedia Input)
connector provides No-compressed and fully digital audio/video data transmission between
TV set and any HDMI audio/video devices, including the set top box, DVD player, Blue-ray
player, A/V receiver and computer.
HDMI connection is required for 480i, 480p, 576i, 576p, 720p, 1080i and 1080p modes. Be sure
to use HDMI cables marked with HDMI symbols only.
f USB interface
Connect USB storage device to play multimedia data
g AV signal output
Connect Video/Audio (L/R) signal of TV to other display devices as their source signal. The function is
available under TV and AV mode.
h AV signal input
Used to connect the COMPOSITE VIDEO output jack on the AV equipments with
COMPOSITE VIDEO functions.The audio source may be connected to the TV set via the L/R
jack.
i Jack for
earphone
Used to connect earphones. If the earphone does not match the jack, use proper jack adapter
(not supplied).The loudspeaker of the TV set will mute after the earphone is connected.
10
Remote control
a
TV
n
o
Freeze
AV
YPbPr
Picture
PC
Audio
USB
I/II
Sleep
Dispaly
q
Keys
Description
f Program
+/-
Press the key to change channels. Press either
of +/- keys and hold to switch channels rapidly.
g Mute
b
h Sleep
l
k
h
Press oœpπ keys to select Picture/Music/
AV under the multimedia thumbnail option.
i
Zoom
Menu
i
j
e
VOL
CH
OK
f
j Menu
k Audio
c
l I/II
Back
Press the key to confirm the item and
settings selected.
Select a file and press the OK key to play
under the multimedia thumbnail option.
Press the key to display the main menu of
the TV set. Options of the main menu vary
with the input and contents.
Press it repeatedly to select the desired
smart sound:
g
s
Press pπ keys to achieve REW/FF when
playing a music file.
Press pπ keys to achieve REW/FF
when playing a AV (Optional speed 2X,
4X,8X,16X,32X)
Source
r
Press the key to set the time after which TV
should turn off and enter standby state. Auto
power-off may also be achieved in the OSD
function option.
Press oœpπ keys to select the desired
option or adjust the OSD menu settings.
oœpπ
p
Press the key to mute or unmute the TV sound.
d
[Personal settings], [Music], [Speech],
[Standard], [DSS]. Smart sound may also be
found in sound settings. Refer to the sound
setting part of the TV set for details.
Switch the stereo and I/II stereo to
monophonic sound. Select the first language
(I) or the second language (II) in the
bilingual program. Note: Decision can be
made only when related sound system is
provided.
Press
keys to switch over
between Previous and Next when playing
pictures.
m
m
keys to switch over
Press
between Previous and Next when playing a
music file or an AV file.
: Press the key to start/pause picture
slide/music/AV playing.
: Press the key to stop picture slide/
music/AV playing.
Keys
Description
a Power
switch
Press the key to turn on/off the TV set.
Turning off the TV set, will turn TV to the
energy saving mode rather than be power
off, unless the AC power switch is off or the
TV set is unplugged.
b TV/
AV(YPbPr)/
HDMI(PC)/
Multimedia
Press TV/AV( YPbPr)/HDMI(PC)/ Multimedia
keys to select input directly.
c 0-9
Press number keys 0-9 to select desired
channels.
d Back
e Source
* Press
Press the key to display the source list.
Pressing the key repeatedly can switch
inputs
11
: to return to the upper menu.
n Freeze
Freeze or unfreeze the picture.
o Picture
Press the key repeatedly to select
available smart images: [Personal Setting],
[Standard], [Bright-colored], [Movie] and
[Power Saving]. Smart images may also be
found in the Picture Settings. Refer to the
Picture Setting part for details.
p Zoom
Press the key repeatedly to browse the
image scale mode settings: [Auto Format],
[Normal], [Zoom1], [Zoom 2], [Wide
screen] available for general source.
[4:3] and [Full screen] are available under
computer mode.
q Display
Click to display information related to
channels and/ or programs (if any). OSD
(on-screen display) will disappear within
several seconds and click again to close the
display.
Press the key to go back to the previous TV
channel viewed or to the menu of the upper
level (Display menu items and settings)
Go back to the upper level under the
multimedia mode.
Back
r Volume +/-
Press the key to adjust the volume.
s - / --
To switch to a channel above 100 rapidly,
Ê
enter three figures after pressing Ê key.Ê
‡Ê
Ê Ê
‡
Ê
Battery installation for the remote control
Put two AAA batteries (supplied) into the position indicated in the battery case of the remote control.
Installation
Refer to the above schematic diagram for important operation instructions.
Stand base installation
Install the stand base (sold separately) before installing the TV set.
Carry out the installation pursuant to the following simple procedures:
42”:
1. Disconnect all cables from the TV set.
2. Place the LCD TV set on a stable table covered with a piece of thick soft cloth with LCD panel faced down.
3. Remove Screw A (1 no.) and take down the bottom cover .
4.
Put on the bottom cover attached to the stand base and fasten Screw A to the original position. Place
the stand base assembly to the original position of the TV set and fasten Screw B to the position
indicated (four screws in total) (Note that the types of Screw A (1 no.) and Screw B (4 no.) are different)
12
Wall-mount
•
Use wall-mount brackets (sold separately) to install the TV set on the wall. Be sure to remove the stand base of
the TV set before installing it.
•
Do not remove the stand base unless the TV set is mount on the wall.
•
First remove four M6(42”) screws before installing wall-mounted brackets.
•
Be sure to keep the screws and the removed stand base properly for future use. Place screws out of children’s
reach.
•
For wall-mount installation, refer to the operation instructions provided for wall-mount brackets. Experience is
required for TV set installation, especially regarding the wall strength to support TV set weight.
•
It is strongly recommended that wall-mount brackets specially designed for your TV set be used and wallmount TV set installation shall be done by the distributor or the authorized contractor of our company.
13
Connections to TV
Cable system or VHF/UHF antenna system
Besides standard definition analog programs, you may also watch standard definition or high definition digital programs
(if such programs are available in your region).
The TV set can receive cable and VHF/UHF antenna analog signal TV programs.
AOC strongly recommend to use 75Ω coaxial cable connected antenna/cable input to receive optimum picture
quality. 300 Ω twin-core cable may be easily affected by RF interference, thus resulting in signal degradation.
Cable or VHF/UHF (or VHF only)
75Ω coaxial
cable
Tuner input of TV
Tuner input
ANTENNA input
Tuner
Tuner input
High definition interface
You can watch high definition programs by subscribing to high definition cable services or high definition satellite
services.To get optimum picture, be sure to connect the interface of the TV set via the HDMI or YPbPr input at the back
of the TV set.
HDMI connection
HDMI input
HDMI
If the equipment is equipped with the DVI jack rather than the HDMI jack, connect the DVI jack to the HDMI input jack
(via the DVI-to-HDMI cable or adapter) and connect the audio jack to the computer audio input jack.
14
YPbPr connection
YPbPr input
AV signal connection
AV signal input
Computer connection
TV set can be used as a computer monitor by connecting TV to computer with a VGA cable.The TV set may also be
connected to a computer with HDMI output.
Computer signal input
•
Use the VGA cable and an audio cable with ferrite core to connect the TV set to the computer.
•
If a PC is connected to the TV set and no computer signal has been input for more than 30 seconds, the TV set
will enter the standby mode automatically.
15
Reference sheet of computer input signals
Set output signals in the computer according to the table below after connecting the computer to the TV set properly.
Definition
Horizontal frequency (kHz)
640 x 480
31.469
Vertical frequency (Hz)
59.940
800 x 600
37.879
60.317
1024 x 768
48.363
60.004
1360 x 768
47.720
59.799
1280 X 1024
63.981
60.000
1920 X 1080
66.587
59.934
Reference sheet of computer HDMI input signals
1. When using the DVI port: Connect the DVI port of the AV equipment to the back of the TV set panel via the DVITo-HDMI cable and set the output signal of the AV equipment according to the table below.
2. When using the computer HDMI port: Connect the computer HDMI port to the back of the TV set panel via the
HDMI cable and set the output signal of the computer according to the table below.
Definition
Horizontal frequency (kHz)
Vertical frequency (Hz)
640 x 480
31.469
59.940
800 x 600
37.879
60.317
1024 x 768
48.363
60.004
1360 x 768
47.720
59.799
1280 X 1024
63.981
60.000
1920 X 1080
66.587
59.934
Reference sheet of audio input signals
1. Connect the YPbPr port or the HDMI port of the AV equipment to the back of the TV set and set the output signal
of the AV equipment according to the table below.
2. If the computer display adapter may support AV format signals, output signals indicated in the following table may
be set.
Definition
Horizontal frequency (kHz)
Vertical frequency (Hz)
720 x 480i
15.734
60
720 x 480p
31.500
60
720 x 576i
15.625
50
720 x 576p
31.250
50
1280 x 720p
37.500
50
1280 x 720p
45.000
60
1920 x 1080i
28.125
50
1920 x 1080i
33.750
60
1920 x 1080p
56.300
50
1920 x 1080p
67.500
60
16
AV system supported by TV:
PAL D/K B/G I ; NTSC M/N。
Standard definition interface
You may watch conventional programs by DVD player or VCR player. Connect the equipment to the TV set via AV input
at the side of the TV set panel.
Operating AOC TV set
Power on/off the TV set
You may turn on the TV set via the power button on the TV set or the remote control.
TV
AV
YPbPr
PC
Freeze
Picture
Audio
Dispaly
• • • •USB
I/II
Sleep
Channel
Volume
Source
Menu
Power
supply
Touch type
Tips
1. Although the TV set consumes little electric power under the standby mode, it will continue to consume electric
power. Unplug the power cord of the TV set if the TV set will not be used for a long time.
2. If you can not find the remote control but still wants to turn on the TV set from the standby mode, press
oChannelœ, pVolumeπor B power supply key on the front of the TV set.
First time settings
While turning on your TV for the first time or when TV is reset to default settings, TV displays Welcome
window as in Figure below Follow the steps below start Initial setup wizard.
Step1 : Press OK key or πarrow key on the remote
17
Step2 : TV pops-up window shown below prompting to select Menu Language.
By default English will be selected as Menu language to continue wizard press OK key or πarrow key
on remote control or to select languages other then English pressoœarrow key and press Ok key.
To exit from initial setup wizard press Menu key.
Step3 : TV pops-up window shown below prompting for Auto scan of channel.
If RF input is connected to TV select [Scan] and press OK key or πarrow key to scan for VHF/UHF
channels automatically.
If RF input is not available to skip channel scan select [Skip Scan] and press OK key or πarrow key..
Step4 : Finally TV will prompt Congratulation window, press OK key on remote to complete initial setup
and to exit the wizard.
18
Switch between input sources
You can select signal sources to your AOC TV set directly with your remote controller. You can also press the
Source key in the display menu to select signal source.
1. When selecting a source with a remote control directly: Press the following keys to switch input sources directly.
TV
AV
YPbPr
HDMI/
PC
USB
Freeze
Picture
Audio
I/II
Sleep
Dispaly
2. When selecting a source with the source key:
Source List
TV
VOL
YPbPr signal
AV terminal
Source
CH
PC
HDMI 1
HDMI 2
HDMI 3
USB
Source
1. Press the
key to display the source menu.
Source
2. Press the
key or the
to select a source: [TV], []YPbPr], [AV Terminal], [Computer], [HDMI 1],
[HDMI 2], [HDMI 3] and [USB]. Press the OK key to enter.
How to select on screen Menu items
1. Press the
Menu
2. Press the
key to display the OSD menu.
key to select required menu
icon for feature setup, and
3. Press the
menus
icon for picture setup,
icon for sound setup,
icon for Installation setup.
key to select the desired menu item and then press the OK for entering into the sub
to
the upper
menu. and the detailed description refer to the table under each settings description.
4. return
Followto
sub-menu
operations
5. Press the
Menu
key to return to the previous menu or to exit from OSD window.
19
Picture settings
Picture
Auto picture
Standard
Brightness
50
Contrast
50
Color
50
Tint
0
Sharpness
Item
Smart image
5
Description
Personal settings
User can set their favorite setting.
Standard
Standard picture setting. Recommended for family entertainment.
Vivid
Enhanced picture contrast and sharpness.
Movie
Used to watch movie based content. Most suitable for cinema environment.
Energy saving
Reduce the backlight intensity to save electricity.
Brightness
Adjust the picture brightness.
Contrast
Adjust the picture contrast.
Color
Adjust the color.
Tint
Adjust the color balance between red and green.
Sharpness
Adjust the picture sharpness with improved details.
Color
temperature
Advanced
settings
Cold color
Display Bluish white picture.
Warm color
Display Reddish white picture.
Normal
Display picture with balance color temperature.
Noise reduction
Reduce the noise interference of the picture.
Flesh Tone
Adjust the picture to display more natural skin tone color.
Backlight
Adjust the brightness of the backlight from 0 to 100. It can be adjusted only when [DCR] is set to be off.
DCR
(Dynamic Contrast Ratio)
MJC
(Motion Judder
Compensation)
Adjust the backlight brightness automatically to increase DCR.
Reduces motion judder
commonly found in fastpaced action scenes in
movie based content.
20
Effect: to reduce the dynamic blur settings.
Separation display: Set the position of MJC displayed on the screen.
Show: Display MJC demo on screen.
Picture settings (For computer source only)
Advanced Video
Auto Config
Horizontal
64
Vertical
48
Phase
4
Clock
127
Resolution
Item
Description
Auto adjustment
Adjust the picture to optimum position of the screen automatically.
Horizontal
position
Adjust the horizontal position of the picture.
Vertical position
Adjust the vertical position of the picture.
Phase
Adjust the phase of the computer output signal.
Clock
Adjust the clock frequency of computer signals.
Resolution
Set the screen resolution to the optimum resolution suitable for Computer application.
* The function is available under specific PC screen resolution only.
21
Sound setting
Sound
Auto sound
Personal
Equalizer 120Hz
0
Equalizer 500 Hz
0
Equalizer 1.5 KHz
0
Equalizer 5 kHz
0
Equalizer 10 kHz
0
AOC co-works with SRS Labs to create unique and exclusive sound technology- DSS Dream Surround. DSS effect
creates a truly immersive surround sound experience with rich bass and clear dialog from only two speakers.
Item
Description
Smart sound
Person setting: Provide the sound mode set by the user.
• Smart sound
may also be
adjusted by
pressing the
Audio key on the
remote control.
Music: Used to watch vocal music.
Speech: Used to watch a speech.
Standard: Suitable for dialogue.
DSS: Create a lifelike and rich surround sound via two loudspeakers while providing rich sound,
clear dialogue and loud sound.
Balancer 120Hz
Balancer 500Hz
Balancer 1.5kHz
Balancer 5kHz
According to user preferences, user can adjust the different center frequency, changing the low,
middle, treble, volume
Balancer 10kHz
Balance
Adjust the balance between the left and right loudspeakers.
Digital audio
output
Set the digital audio output to PCM when audio is connected through SPDIF.
Auto volume
•
Automatically reduces sudden volume changes, for example, when switching between the channels.
* Workable only under [TV] source.
Some sound settings are not available according to different input source.
22
Features settings
Features
Menu Language
Simplified Chinese
Picture Format
Time
Auto
Parental
Reset
SW Ver.
V1.000A
Item
Description
Menu language
Press the pπ key to select the required language and press the OK key to confirm it.
Picture format
To select the available picture format.
Time
Wide screen, Auto, Normal, Zoom1 and Zoom2
Sleep timer can be set to 5, 10, 15, 30, 45, 60, 90, 120 minutes.
Tips:
1. The TV switches to standby after the specified time.
2. This can also be set by using the SLEEP button on the remote control.
Channel Block: Lock the unwanted channels, so that
you can restrict the children to watch unsuitable TV
programs.
Parental
Parental feature allows you to lock the
channels and connected devices, to prevent children from viewing inappropriate
content on TV.
Input Block: Allows you to block individual video
inputs like TV, YPbPr, AV, PC, HDMI inputs.
• USB input cannot be blocked.
Set Password: The initial password is 1234. You can
change the password to any 4-digit number of your
choice.
Clear All: Reset all parental Menu selection except
Password.
•
Reset
All settings are reset to default values.
Software version
Display the software version.
Some function settings are not available according to different picture source formats.
23
TV settings
The setting is available only in TV mode.
TV
Channel Scan
Manual Scan
Channel Skip
Channel Sort
Channel Edit
Channel Fine Tune
Item
Description
Channel scan
TV automatically searches for the channel in the available frequency band and stores
sequentially
Press the OK key to enter the interface. Press the pπ to select [Yes] and press the OK key to
start scanning channels.
Scan the wireless channels or cable channels the TV set can receive in your area automatically.
Manual channel
scan
Search for the channels manually and store it to the desired channel number.
Enter the required channel frequency using remote number key in [Start Frequency] window.
Press the pπ key to select [Scan Upward] or [Scan downward] and start scanning from the initial
frequency.
To skip the unwanted channel while changing the channels.
Select channels to be skipped by pressing OK key.
Tips:
Channel skipping 1. The selected channel is skipped when you press CH +/- on your remote control.
2. Press the Numeric buttons on the remote control to access the skipped channel.
3. To un-skip the channel, enter into Channel skip sub menu and un-select the channels not
to be skipped from the channel list.
Channel sort
It is used to interchange the channels. So that you can arrange tuned channels as per your
requirements.
Select the channels to be interchanged by pressing OK.
Channel swap can be done only between two channels.
Channel edit
Used to edit the channel parameters like Channel number, Channel name, Frequency, Color
systerm and Sound system.
Press the oœ key to select the channel and then press the OK key to enter into the sub menu.
Press π key to edit the channel information.
Channel fine
tune
Fine tune the analog channel manually when the quality of reception is poor.
Press the oœ key to select channels and press the OK key to enter into sub menu. Press the
pπ key to fine tune the channel.
24
Multimedia functions (USB)
TV USB port can be used to view JPEG photos, play mp3 music and Video files present in USB devices.
Selecting USB Media Center:
Press the
USB
Direct USB key on remote to enter into the [USB] source
OR
Source
1. Press the
key to display the source menu.
2. Press the
key to select [USB] source. and press the OK key to enter into USB source.
USB menu settings
When USB drive is detected by the TV, USB drive is displayed as a folder on the screen as shown below. If more then
one USB is pluged to the TV two folders will be displayed. Select the required drive and press OK key to view subfolder
or files in theUSB drive.
Press the Menu Key to get the following Menu options
1. [SORT] : Used to arrange the folder and files as per Date or File Name
2. [Media Type] : Select the type of files to be viewed is eighter Photo or Music or Video.
3. [Thumbnail size] : Select the thumbnail size of the folder and files as Small, Medium or Large.
* Press the
key to return to the upper menu.
* To Quit the USB source : Press the
key and select other source or press
key
to select other source.
Viewing Photos
1. Press Menu key and select [Photo] under [Media Type] menu and press OK key.
2. Thumbnail of the available images will be displayed on the screen. If no images are displayed then select the
folder containing the Photos .
3. To select a perticular image and to display it in fullscreen press
key and press OK key.
Slide show starts automatically when image is viewed in full screen.
4. Press
key to play/pause slideshow. Press
to veiw next or previous image. Press
slideshow
25
key to stop
USB menu settings for JPEG
Press the Menu key to get the following menu settings:
1. [Pause/Play] : Use to pause or play the slide show.
2. [Repeat] : Use to select the following repeat options:
a. Repeat one : show same image repeatedly.
b. Repeat all : show all the images in the folder repeatedly.
3. [ Shauffle On/Off] : When shauffle is on slideshow will display images randomly and if shauffle is off slideshow displays
imagesone after the other according to sort order
4. [Rotate] : When the slideshow is paused the image can be rotated by 90 degree in clockwise direction.
5. [ Zoom] : When the slideshow is paused the image can be Zoomed to scale of 1X, 2X and 4X.
6. [Show info] : Used to view the details of image like Name, Date, Size..
Playing mp3 music files.
1. Press Menu key and select [Music] under [Media Type] menu and press OK key.
2. Thumbnail of the available Music files will be displayed on the screen. If no files are displayed then select the folder
containing mp3 music files and press OK key.
3. To select a required music file press
key and press OK key to play music.
4. Press
key on remote to play or pause the music playback. Press
music track present in the folder. Press
key to stop music playback. Press
Music playback at rate of 2X, 4X, 8X, 16X and 32X.
key on remote to select next or previous
key to Fast forward or Rewind the
USB menu settings for Music playback
Press the Menu key to get the following menu settings:
1. [Pause/Play ]: Use to pause or play the Music playback.
2. [Repeat] : Use to select the following repeat options:
a. Repeat one : play the same music file repeatedly.
b. Repeat all : play all the music files in the folder repeatedly.
3. [Shauffle On/Off] : When shauffle is on random music files will be played and if shauffle is off music files will be played
one after the other according to sort order.
4. [Show info] : Used to view the details of the music file like Title, Artist, Album, Year, Duration.
5. [Show Spectrum] : Displays a Equalizer bars at the bottom of the screen.
6. [Audio only] : Play TV sound only and TV LED backlight will be turned off.
(Note : To turn on the display Press any key on remote control)
Playing Video files.
1. Press Menu key and select [Video] under [Media Type] menu and press OK key.
2. Thumbnail of the available Video files will be displayed on the screen. If no files are displayed then select the folder
containing Video files and press OK key.
3. To select a required video file press
key and press OK key to play the Video.
4. Press
key on remote to play or pause the Video. Press
Video files present in the folder. Press
key to stop video. Press
at rate of 2X, 4X, 8X, 16X and 32X.
key on remote to select next or previous
key to Fast forward or Rewind the video
USB menu settings for Video
1. [Pause/Play ]: Use to pause or play the the video play.
2. [Repeat] : Use to select the following repeat options:
a. Repeat one : play the same music file repeatedly.
b. Repeat all : play all the music files in the folder repeatedly.
3. [Show info] : Used to view the details of the Video file like Title, Director, Genre, Duration, Next file.
4. [Auto Picture] : Used to change the picture settings eighter to Personal, Standard, Vivid, Movie and Eco
5. [Picture format] : To select the display format as eigther Auto, Normal(4:3), Zoom1, Zoom2, Wide Screen.
26
Tips:
1. The USB interface to the digital multimedia player is not universal. If a file fails to be identified by the USB
interface, it is normal and related to the equipment drive.
2. The period needed for the player to read information varies with the equipment and its memory capacity and
information reading speed may slow down temporarily. This is a normal phenomenon.
3. The USB interface of the equipment provides 5V voltage and 500Ma maximal current. Owing to different interface
specification rather than the standard USB protocol adopted by some memory equipments, it will affect correct
identification by the digital multimedia player, which is normal.
4. USB may act as the software upgrade interface.
5. Not all files of the following formats are supported. Specific parameters of some multimedia source go beyond the
decoding range, resulting in play failure. It does not belong to the machine failure.
6. Support the storage medium of FAT16/FAT32 file format only in the system.
7. Support multimedia format, as shown in the table below.
Multimedia format supported
USB 2.0
USB
Storage
medium
FAT16 / FAT32
Picture
JPEG (*.JPG), PNG, GIF, BMP
Music
•
MPEG1 (*.MP3)
•
Sampling rate: 32k, 44.1k, 48kHz
•
Data rate: 32k, 64k, 96k, 128k, 196k, 256k, 320kbps
•
MPEG1/2 (*.AVI, *.MPG, *.MPEG, *.TS)
•
MPEG4 (*.AVI, *.MP4, *.MOV, *.MKV)
•
H.264 (*.AVI, *.MP4, *.MOV, *.MKV, *.TS)
•
RM/RMVB
AV
27
Dimensions and specifications
Model
LE42K09D
LE42H09P
Panel display size
930.24(H) x 523.26(V)
(42.02”diagonal)
930.24(H) x 523.26(V)
(42.02”diagonal)
Resolution
1920 x 1080P Full HD
1920 x 1080P Full HD
Panel spec
Horizontal 178˚ (TYP)
Vertical 178˚ (TYP)
Horizontal 178˚ (TYP)
Vertical 178˚ (TYP)
Brightness
TYP: 450 cd/m2
TYP: 450 cd/m2
Contrast
4000:1 (TYP)
4000:1 (TYP)
Loudspeaker
8W x 2 + 10W
8W x 2 + 10W
AV system
PAL
PAL
Audio system
D/K, B/G, M, I
D/K, B/G, M, I
Antenna impedance
75Ω
75Ω
Input voltage
180~240W, 50/60Hz
180~240W, 50/60Hz
Energy consumption
120W
120W
Standby energy consumption
≤ 0.5W
≤ 0.5W
Dimension (W×H×D)
With stand base and brackets (mm)
1035.2 X 706 X 242.2
1035.2 X 706 X 242.2
Wall-mounted accessories
Options
Options
Wall-mounted dimension
200 X 200 mm
M6 (Screw)
200 X 200 mm
M6 (Screw)
Operation temperature
0℃~35℃
0℃~35℃
Operation humidity
10~90%
10~90%
Storage temperature
-20℃~50℃
-20℃~50℃
Storage humidity
10~90%
10~90%
28
Troubleshooting
Symptoms
Explanation/solution
No picture is available.
Check the energy saving settings.
Fail to receive any
channel.
Ensure proper power cord connection. Turn on the TV set. Check antenna/cable
connection.
Ensure your TV source cable settings are correct.
The TV set is locked in
a certain channel.
Execute auto program searching and add available channels not saved in the TV channel
memory.
Fail to receive or select
channels.
Execute auto channel scanning and add available channels not saved in the TV channel
memory.
Check the antenna connection at the back of the TV set to confirm whether it is
connected to the TV set correctly. The symptom in the left may be caused by the
broadcasting station. Try other channels and adjust the contrast and brightness settings.
The TV set is turned off
automatically.
Check whether the sleep timer is enabled or identify the auto turn-off time settings.
Check the computer power management in general settings.
Some AV files can not
be displayed.
Check connection between optional AV equipment and the TV source. Press the Source
(input) key on the remote control.
Select the input you desire from the external input list.
No picture is available
Poor picture quality
Image quality is inferior
to that as viewed in the
seller shop.
Picture quality depends on the source quality.
Ghost.
Check antenna/cable connection. Check the antenna position and direction.
The TV screen only
displays snowflakes and
noise.
Check whether the antenna has been broken or bent.
Check whether eth antenna has reached its service life (3-5years under normal use
conditions and 1-2 years if used by seaside).
Dotted line or fringe.
Keep the TV set far away from noise source such as automobile, motorcycle or blower.
If 300 Ω dual-core cable is used, keep noise far away from the TV set or try to use 75 Ω
coaxial cable.
No color/dark/
improper color/too
bright
Select the intended mode according to the picture settings.
Adjust the picture mode option in the picture settings.
Picture noise
Ensure the antenna is connected by a 75 Ω coaxial cable and keep the antenna cable far
away from other connection cables.
To avoid TV set interference, be sure to use unworn antenna cables.
Fail to play photos,
music files or AV files
or the playing quality
is poor.
Check whether the source is proper for the supported mode.
MP3/MP4 player
failed to be identified
normally by the USB
interface of the TV set.
Whether the USB cable is good.
Whether the USB connection cable of the TV set side is inserted properly.
Whether the power supply for the MP3/MP4 player is turned on.
Try to connect the USB cable properly and switch on the MP3/MP4 player for normal
identification of the TV set side.
The user forgets the
password already set.
Try to enter the general password-5363.
Normal picture
without sound.
Check the volume control. Press the Mute key on the remote control or the VOL ∧ key to
make the
symbol on the screen. Disconnect the earphones.
For the HDMI equipment, identify the output settings of equipments connected are set as
PCM. The HDMI input of the TV set supports PCM 32, PCM 44.1 and 48kHz.
Noise
Ensure the antenna is connected with a 75Ω coaxial cable and keep the antenna cable
away from other connection cables.
To avoid TV set interference, ensure to use unworn antenna cables.
No sound/noise
29
Symptoms
Explanation/solution
Computer input
Identify that the computer has been connected to the TV set properly via computer
output (with the HD cable) or the HDMI output.
No picture/no signal.
Ensure that the output signal in the computer is a format listed in the signal reference
sheet.
Turn off the computer. Identify that the computer is connected properly and restart the
computer. The plug-and-play equipment will detect the TV set automatically and set the
computer resolution properly.
Check whether the power management of the computer is enabled.
Poor picture quality.
Adjust the resolution. Adjust the dot pitch and phase.
The picture becomes
smaller suddenly.
The picture becomes smaller when receiving commercial TV programs, this is caused by
the broadcasting method the supplier adopts. When high definition channel is switched to
a standard definition channel (commercial TV program), the picture will become smaller,
with a black stripe at the edge of the screen.
Black stripe at the edge
of the screen.
The aspect ratio of some wide-screen program exceeds 16:9 when they are shot (especially
cinema versions). Black stripes will appear at the upper and lower edge of the screen when
the TV set plays these programs while black stripes will appear at the left and right edge of
the screen when the TV set plays programs with their aspect ratio of 4:3.
Some DVD or other
digital source programs
display detail loss,
especially in rapid
actions and dark scene.
This is caused by digital compression of source contents used by digital broadcasting and
DVD files, making less details displayed on the TV screen or resulting in blemish on the
screen (mosaic or dot). Compression of these signals is clear, subject to the definition and
resolution of the TV set.
Remote control
Check whether the batteries are placed properly or replace the batteries of the remote
control.
The remote control
does not work.
Point the remote control to the remote sensor in the front of the TV set.
Fluorescent lamps may interfere with the remote control operations; therefore, attempt
to turn off the fluorescent lamp.
Ensure signals from the remote control can reach the remote sensor directly.
30
Download PDF

advertising