APC Smart-UPS 1400XLT, 2200XLT, 3000T, 5000T Uninterruptible Power Supply User's Manual

Below you will find brief information for Smart-UPS 1400XLT, Smart-UPS 2200XLT, Smart-UPS 3000T, Smart-UPS 5000T. These APC Smart-UPS models are designed to protect your computer systems from various power disruptions, such as blackouts, brownouts, sags, and surges. They also filter out minor utility line fluctuations and isolate your equipment from major disturbances. During a power outage, the UPS seamlessly switches to its internal batteries, ensuring continuous power to your connected devices.

PDF Download
Document
Smart-UPS 1400XLT, 2200XLT, 3000T, 5000T User's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Automatic self-test
  • Battery replacement
  • Power management software
  • Surge protection
  • Battery backup
  • Cold start
  • Low battery warning
  • Overload protection
  • SmartTrim
  • SmartBoost

Frequently asked questions

The batteries are shipped disconnected from the UPS. Install and connect the batteries according to the instructions found in the User’s Manual.

The runtime of the battery depends on the load and the model of UPS. Refer to the user manual for the specific runtime based on the load.

When the battery is fully charged, all five LEDs on the right of the front panel will light.

The UPS performs a self-test automatically upon startup and every two weeks. You can also manually perform a self-test by pressing and holding the "ON/Test" button until the UPS beeps.

Cold Start allows the UPS to power the connected equipment from the battery even if there is no utility power present. This can be done by pressing and holding the "ON/Test" button until the UPS beeps and then releasing the button during the beep.
Preparing document for printing…
0%