APC Smart-UPS 5000RMB Uninterruptible Power Supply User’s Manual

Below you will find brief information for Uninterruptible Power Supply Smart-UPS 5000RMB. This Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags and surges from reaching your computer and other valuable electronic equipment. It also filters out small utility line fluctuations and isolates your equipment from large disturbances by internally disconnecting from the utility line, while supplying power from its internal batteries until the utility line returns to safe levels.

PDF Download
Document
Uninterruptible Power Supply Smart-UPS 5000RMB User’s Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Protects against power outages
  • Filters out line noise
  • Provides battery backup
  • Automatic self-test
  • Hot-swappable battery
  • LCD display
  • Computer interface port
  • TVSS connector

Frequently asked questions

Use your equipment's power cords to connect to the UPS.

Typical battery life is 3 to 6 years, depending on the number of discharge cycles and ambient temperature.

The UPS has an easy to replace hot-swappable battery. Battery replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and loads on for the following procedure.

The maximum load for this UPS is 5000 VA/3750 W.

To reduce UPS sensitivity, press the configuration button on the rear panel. Use a pointed object such as a pen to press the button. Press it once to set the UPS’s sensitivity to reduced. Press it again to set the sensitivity to low. Press the button a third time to reset normal sensitivity.
Preparing document for printing…
0%