User guide | Apple A1387 Cell Phone User Manual

Avaya 4027, 4070, and
4075 DECT Handsets User
Guide
Avaya Communication Server 1000
Document Status: Standard
Document Version: 02.01
Part Code: NN43120-122
Date: November 2010
© 2010 Avaya Inc. All Rights Reserved.
Notices
While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time
of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the
information in this document without the obligation to notify any person or organization of such changes.
Documentation disclaimer
Avaya shall not be responsible for any modifications, additions, or deletions to the original published version of this
documentation unless such modifications, additions, or deletions were performed by Avaya. End User agree to indemnify
and hold harmless Avaya, Avaya’s agents, servants and employees against all claims, lawsuits, demands and judgments
arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation, to the extent
made by End User.
Link disclaimer
Avaya is not responsible for the contents or reliability of any linked Web sites referenced within this site or
documentation(s) provided by Avaya. Avaya is not responsible for the accuracy of any information, statement or content
provided on these sites and does not necessarily endorse the products, services, or information described or offered within
them. Avaya does not guarantee that these links will work all the time and has no control over the availability of the linked
pages.
Warranty
Avaya provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited
warranty. In addition, Avaya’s standard warranty language, as well as information regarding support for this product, while
under warranty, is available to Avaya customers and other parties through the Avaya Support Web site: http://
www.avaya.com/support
Please note that if you acquired the product from an authorized reseller, the warranty is provided to you by said reseller and
not by Avaya.
Licenses
THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE, HTTP://SUPPORT.AVAYA.COM/
LICENSEINFO/ ARE APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR INSTALLS AVAYA
SOFTWARE, PURCHASED FROM AVAYA INC., ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA
RESELLER (AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH AVAYA OR AN AUTHORIZED
AVAYA RESELLER. UNLESS OTHERWISE AGREED TO BY AVAYA IN WRITING, AVAYA DOES NOT EXTEND
THIS LICENSE IF THE SOFTWARE WAS OBTAINED FROM ANYONE OTHER THAN AVAYA, AN AVAYA
AFFILIATE OR AN AVAYA AUTHORIZED RESELLER, AND AVAYA RESERVES THE RIGHT TO TAKE LEGAL
ACTION AGAINST YOU AND ANYONE ELSE USING OR SELLING THE SOFTWARE WITHOUT A LICENSE. BY
INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR AUTHORIZING OTHERS TO DO SO, YOU, ON
BEHALF OF YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING, DOWNLOADING OR USING
THE SOFTWARE (HEREINAFTER REFERRED TO INTERCHANGEABLY AS "YOU" AND "END USER"), AGREE
TO THESE TERMS AND CONDITIONS AND CREATE A BINDING CONTRACT BETWEEN YOU AND AVAYA
INC. OR THE APPLICABLE AVAYA AFFILIATE ("AVAYA").
Copyright
Except where expressly stated otherwise, no use should be made of the Documentation(s) and Product(s) provided by
Avaya. All content in this documentation(s) and the product(s) provided by Avaya including the selection, arrangement and
design of the content is owned either by Avaya or its licensors and is protected by copyright and other intellectual property
laws including the sui generis rights relating to the protection of databases. You may not modify, copy, reproduce, republish,
upload, post, transmit or distribute in any way any content, in whole or in part, including any code and software.
Unauthorized reproduction, transmission, dissemination, storage, and or use without the express written consent of Avaya
can be a criminal, as well as a civil offense under the applicable law.
Third Party Components
Certain software programs or portions thereof included in the Product may contain software distributed under third party
agreements ("Third Party Components"), which may contain terms that expand or limit rights to use certain portions of the
Product ("Third Party Terms"). Information regarding distributed Linux OS source code (for those Products that have
distributed the Linux OS source code), and identifying the copyright holders of the Third Party Components and the Third
Party Terms that apply to them is available on the Avaya Support Web site: http://support.avaya.com/Copyright.
Trademarks
The trademarks, logos and service marks ("Marks") displayed in this site, the documentation(s) and product(s) provided by
Avaya are the registered or unregistered Marks of Avaya, its affiliates, or other third parties. Users are not permitted to use
such Marks without prior written consent from Avaya or such third party which may own the Mark. Nothing contained in
this site, the documentation(s) and product(s) should be construed as granting, by implication, estoppel, or otherwise, any
license or right in and to the Marks without the express written permission of Avaya or the applicable third party. Avaya is
a registered trademark of Avaya Inc. All non-Avaya trademarks are the property of their respective owners.
Downloading documents
For the most current versions of documentation, see the Avaya Support. Web site: http://www.avaya.com/support
Contact Avaya Support
Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support
telephone number is 1-800-242-2121 in the United States. For additional support telephone numbers, see the Avaya Web
site: http://www.avaya.com/support
Revision history
November 2010
Standard 02.01. This document is up-issued to support DECT
Release 5.0 and Communication Server 1000 Release 7.5.
June 2010
Standard 01.11. This document is up-issued to support Avaya
Communication Server 1000 Release 7.0.
May 2009
Standard 01.10. This document is up-issued to support the DECT
4027, 4070, and 4075 Handsets. Minor corrections.
April 2009
Standard 01.09. This document is up-issued to support the DECT
4027, 4070, and 4075 Handsets.
April 2008
Standard 01.08. This document is issued to support the DECT
4027 and 4070 Handsets and to reflect editorial changes.
March 2008
Standard 01.07. This document is issued to support the DECT
4027 and 4070 Handsets and to reflect editorial changes.
March 2008
Standard 01.06. This document is issued to support the DECT
4027 and 4070 Handsets and to reflect editorial changes.
March 2008
Standard 01.05. This document is issued to support the DECT
4027 and 4070 Handsets and to reflect editorial changes.
3
February 2008
Standard 01.04. This document is issued to support the DECT
4027 and 4070 Handsets and to reflect editorial changes.
February 2008
Standard 01.03. This document is issued to support the DECT
4027 and 4070 Handsets and to reflect change to the technical
content.
February 2008
Standard 01.02. This document is issued to support the DECT
4027 and 4070 Handsets and to reflect change to the technical
content and editorial changes.
January 2008
Standard 01.01. This document is issued to support the DECT
4027 and 4070 Handsets.
4
Contents
Welcome to Avaya 4027, 4070, 4075 DECT Handsets . . . . 13
Feature overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Regulatory and safety information . . . . . . . . . . . . . . . . . . . . . 14
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installing the MEM card and Bluetooth wireless module . . . . 18
Installing the battery pack (4027 and 4070 only) . . . . . . . . . . 18
Installing the charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Charging the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Important battery information . . . . . . . . . . . . . . . . . . . . . . 22
Charging guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Charging and operating times . . . . . . . . . . . . . . . . . . . . . 24
Charge display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Switching the handset on or off . . . . . . . . . . . . . . . . . . . . . . . 26
Display areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Icon line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Dialogue area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Soft key line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
LED indicator (4075 only) . . . . . . . . . . . . . . . . . . . . . . . . . 33
Handset controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Key functions in Idle mode . . . . . . . . . . . . . . . . . . . . . . . . 36
Key functions in Call mode . . . . . . . . . . . . . . . . . . . . . . . . 38
Key functions in Dialogue mode . . . . . . . . . . . . . . . . . . . . 40
Key functions in Menu mode . . . . . . . . . . . . . . . . . . . . . . 40
Key functions in Edit mode . . . . . . . . . . . . . . . . . . . . . . . . 41
Locking or unlocking the dialpad . . . . . . . . . . . . . . . . . . . 45
5
DECT system configuration . . . . . . . . . . . . . . . . . . . . . . . . 46
Accessing the Connectivity menu . . . . . . . . . . . . . . . . . . . . . . 46
Subscribing the handset to a DECT system . . . . . . . . . . . . . . 47
Manually selecting the DECT system . . . . . . . . . . . . . . . . . . . 49
Enabling automatic DECT system selection . . . . . . . . . . . . . . 50
Deregistering the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Editing the system name and phone number . . . . . . . . . . . . . 51
Call features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Make calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Dialling a number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Predial mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Using Speed dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using Loudspeaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using the telephone book to dial a number . . . . . . . . . . . 56
Using the Central Directory to dial a number . . . . . . . . . . 57
Making an SOS call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Making an Emergency call . . . . . . . . . . . . . . . . . . . . . . . . 59
Answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Answering a call in Normal mode . . . . . . . . . . . . . . . . . . . 61
Answering a call using any key . . . . . . . . . . . . . . . . . . . . 61
Auto-answering mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Muting the ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Rejecting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Change settings during a call . . . . . . . . . . . . . . . . . . . . . . . . . 62
Adjusting the headset or loudspeaker volume . . . . . . . . . 62
Using mute during a call . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Transfer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Transferring a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Voice mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Accessing voice mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Defining a voice mail number . . . . . . . . . . . . . . . . . . . . . . 66
6
Calls list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
All calls list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Accessing the All calls list . . . . . . . . . . . . . . . . . . . . . . . . 70
Viewing information about a call . . . . . . . . . . . . . . . . . . . 71
Dialling a number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Transferring a number to your Contacts list . . . . . . . . . . . 72
Transferring a number to the caller filter list . . . . . . . . . . . 73
Deleting an entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Deleting all entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Answered calls list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Accessing the Answered calls list . . . . . . . . . . . . . . . . . . 76
Viewing information about an answered call . . . . . . . . . . 76
Dialling a number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Transferring a number to your Contacts list . . . . . . . . . . . 77
Transferring a number to the caller filter list . . . . . . . . . . . 78
Deleting an entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Deleting all entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Dialled calls list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Accessing the Dialled calls list . . . . . . . . . . . . . . . . . . . . . 81
Viewing information about a dialled call . . . . . . . . . . . . . . 81
Dialling a number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Transferring a number to your contacts list . . . . . . . . . . . 82
Transferring a number to the Caller filter list . . . . . . . . . . 84
Deleting an entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Deleting all entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Missed calls list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Accessing the Missed calls list . . . . . . . . . . . . . . . . . . . . . 87
Viewing information about a missed call . . . . . . . . . . . . . 88
Dialling a number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Transferring a number to your Contacts list . . . . . . . . . . . 89
Transferring a number to the Caller filter list . . . . . . . . . . 90
Deleting an entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Deleting all entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
7
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Accessing the Contacts menu . . . . . . . . . . . . . . . . . . . . . 94
Adding a new contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Adding a contact number . . . . . . . . . . . . . . . . . . . . . . . . . 95
Editing a contact number . . . . . . . . . . . . . . . . . . . . . . . . . 96
Deleting a contact number . . . . . . . . . . . . . . . . . . . . . . . . 98
Editing a contact name . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Editing a contact ringtone . . . . . . . . . . . . . . . . . . . . . . . . 100
Deleting a contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Speed dial feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Transfer numbers to your contacts list . . . . . . . . . . . . . . 104
Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Message limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
New messages and drafts . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Accessing the Messaging menu . . . . . . . . . . . . . . . . . . 108
Saving a new message or editing a draft . . . . . . . . . . . . 109
Sending a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Deleting a draft message . . . . . . . . . . . . . . . . . . . . . . . . 112
Deleting all draft messages . . . . . . . . . . . . . . . . . . . . . . 113
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Accessing the Messaging Inbox . . . . . . . . . . . . . . . . . . . 114
Reading a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Replying to a message . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Forwarding a message . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Saving a number to the contacts list . . . . . . . . . . . . . . . 118
Deleting a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Deleting all messages from the Inbox . . . . . . . . . . . . . . 119
Sent messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Accessing the Sent Messages menu . . . . . . . . . . . . . . . 121
Reading a sent message . . . . . . . . . . . . . . . . . . . . . . . . 121
Forwarding a sent message . . . . . . . . . . . . . . . . . . . . . . 122
Deleting a sent message . . . . . . . . . . . . . . . . . . . . . . . . 123
8
Deleting all sent messages . . . . . . . . . . . . . . . . . . . . . . 124
Message settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Accessing the message Settings menu . . . . . . . . . . . . . 125
Configuring the Overwrite option . . . . . . . . . . . . . . . . . . 125
Managing sent messages . . . . . . . . . . . . . . . . . . . . . . . 127
Configuring Message display setting . . . . . . . . . . . . . . . 127
Configuring Automatic Answer setting . . . . . . . . . . . . . . 128
Configuring Silent Answer setting . . . . . . . . . . . . . . . . . 129
Normal and urgent messages . . . . . . . . . . . . . . . . . . . . . . . 130
Confirming urgent messages . . . . . . . . . . . . . . . . . . . . . 131
Message list full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Accessing the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . 134
Changing the calendar format . . . . . . . . . . . . . . . . . . . . 134
Selecting a date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Adding an appointment . . . . . . . . . . . . . . . . . . . . . . . . . 136
Viewing an appointment . . . . . . . . . . . . . . . . . . . . . . . . . 137
Editing an appointment . . . . . . . . . . . . . . . . . . . . . . . . . 138
Copying an appointment . . . . . . . . . . . . . . . . . . . . . . . . 140
Deleting an appointment . . . . . . . . . . . . . . . . . . . . . . . . 141
Calculator, Stopwatch, and Alarms . . . . . . . . . . . . . . . . . 143
Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Nonrecurrent alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Recurrent alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Telephone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
General settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Accessing the General settings menu . . . . . . . . . . . . . . 156
Profile configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
9
Configuring the time and date . . . . . . . . . . . . . . . . . . . . 160
Choosing a language . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Configuring shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Configuring the LED Indicator (4075 only) . . . . . . . . . . . 164
Security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Defining the handset name . . . . . . . . . . . . . . . . . . . . . . 170
Resetting the handset . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Resetting the MEM card . . . . . . . . . . . . . . . . . . . . . . . . . 172
Viewing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Accessing the Sounds and alerts menu . . . . . . . . . . . . . 174
Configuring the ring volume . . . . . . . . . . . . . . . . . . . . . . 175
Defining the ring external melody . . . . . . . . . . . . . . . . . . 175
Defining the ring internal melody . . . . . . . . . . . . . . . . . . 176
Defining the Ring unknown call melody . . . . . . . . . . . . . 177
Defining the Normal message melody . . . . . . . . . . . . . . 177
Defining the Urgent message melody . . . . . . . . . . . . . . 178
Defining the Ring emergency melody . . . . . . . . . . . . . . 179
Enabling the Increasing ring feature . . . . . . . . . . . . . . . 179
Configuring Alert volume . . . . . . . . . . . . . . . . . . . . . . . . 180
Defining the Alert tone melody . . . . . . . . . . . . . . . . . . . . 181
Enabling Increasing alert . . . . . . . . . . . . . . . . . . . . . . . . 181
Enabling the Vibrator . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Enabling the Key sound . . . . . . . . . . . . . . . . . . . . . . . . . 183
Enabling Confirmation sound . . . . . . . . . . . . . . . . . . . . . 184
Enabling the Coverage warning . . . . . . . . . . . . . . . . . . . 185
Enabling the Charger warning . . . . . . . . . . . . . . . . . . . . 186
Configuring Missed call time . . . . . . . . . . . . . . . . . . . . . 186
Configuring Cadence Mode . . . . . . . . . . . . . . . . . . . . . . 187
Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Accessing the Display settings menu . . . . . . . . . . . . . . . 189
Wallpaper customisation . . . . . . . . . . . . . . . . . . . . . . . . 189
Selecting a theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
10
Startup customisation . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Configuring Power save . . . . . . . . . . . . . . . . . . . . . . . . . 195
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Accessing the call settings menu . . . . . . . . . . . . . . . . . . 196
Accessing call and message statistics . . . . . . . . . . . . . . 197
Answer mode configuration . . . . . . . . . . . . . . . . . . . . . . 197
Caller filter configuration . . . . . . . . . . . . . . . . . . . . . . . . 200
Emergency call configuration . . . . . . . . . . . . . . . . . . . . . 206
Mandown configuration (4075 only) . . . . . . . . . . . . . . . . 209
Activating the Silent charging feature . . . . . . . . . . . . . . . 216
Connectivity settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Accessing additional features
using FFC or SPRE codes . . . . . . . . . . . . . . . . . . . . . . . . . 219
Handset accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Available accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Installing the headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Removing and installing the battery pack (4075 only) . . . . . 227
Charging the battery pack (4075 only) . . . . . . . . . . . . . . . . . 229
MEM card installation and removal . . . . . . . . . . . . . . . . . . . 231
Bluetooth wireless technology module installation . . . . . . . . 234
Bluetooth wireless technology headset installation . . . . . . . 238
Terms you should know . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
11
12
Welcome to Avaya 4027, 4070, 4075 DECT Handsets
Welcome to Avaya 4027, 4070,
4075 DECT Handsets
Avaya Digital Enhanced Cordless Telecommunications (DECT) 4027,
4070, and 4075 DECT Handsets are cordless phones with enhanced
features suitable for office use. The handsets include a single-press SOS
key used to make one-touch calls or send messages to a particular
contact number.
The Avaya 4070 and 4075 DECT Handset offer a text-messaging facility
to send and receive messages. The messaging feature is not available on
the 4027 DECT Handset. The 4075 DECT Handset offers all of the
features of the 4070 DECT Handset, as well as Mandown and an LED
Indicator. The 4075 DECT Handset also offers IP54 protection and has a
changeable battery that uses inductive charging technology.
Avaya 4027, 4070, 4075 DECT Handsets are compatible both with
traditional DECT system (based on DMC cards) and with the SIP DECT
solution.
Note: This User Guide is applicable to handset software release 2.00
or later. On Avaya 4027 and 4070 DECT Handsets with an earlier
software version, some of the described features are not available.
To determine the software release installed on your handset, see
“Viewing information” (page 173).
Basic information about your handset is described in the following
sections:
•
“Feature overview” (page 13)
•
“Regulatory and safety information” (page 14)
•
“Safety precautions” (page 16)
Feature overview
You can use your Avaya 4027, 4070, 4075 DECT Handsets to perform
the following tasks:
13
Welcome to Avaya 4027, 4070, 4075 DECT Handsets
•
send and receive messages (4070 and 4075 DECT Handsets only)
•
configure audio and display settings
•
create daily and recurrent alarms
•
use the calculator and stopwatch
If you use your handset with Avaya SIP DECT, the following additional
features are available:
•
automatic update of the time and date settings when switching on the
handset
•
send and receive messages without DECT Messenger (4070 and
4075 only)
•
individual ring melodies to distinguish between internal and external
calls
•
central directory
Regulatory and safety information
Read the following information before you use your Avaya 4027, 4070,
and 4075 DECT Handset.
CAUTION
Like all cordless telephones, this handset uses radio
signals, which do not guarantee a connection under all
circumstances. Do not rely exclusively on cordless
telephones when making indispensable calls (such as
medical emergencies).
This device complies with the essential requirements and other relevant
provisions of the R&TTE Directive 1999/5/EC, the Restriction of
Hazardous Substances (RoHS) 2002/95/EC, and the WEEE Directive
2002/95/EC.
14
Welcome to Avaya 4027, 4070, 4075 DECT Handsets
You can obtain a copy of the Declaration of Conformity from Avaya using
the following Web page:
http://www.avaya.com/support
Avaya 4027 Wireless DECT Handset PTC 207/08/079
Avaya 4070 Wireless DECT Handset PTC 207/08/080
Avaya 4075 Wireless DECT Handset PTC 207/10/005
PTC Notice for New Zealand
The grant of a Telepermit for any item of terminal equipment indicates
only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement of
the product by Telecom, nor does it provide any sort of warranty. Above
all, it provides no assurance that any item will work correctly in all
respects with another item of Telepermitted equipment of a different make
or model, nor does it imply that any product is compatible with all of
Telecom's network services.
15
Welcome to Avaya 4027, 4070, 4075 DECT Handsets
Avaya 4027 and 4070 DECT Handsets comply with IP50, Avaya 4075
DECT Handset complies with IP54, according to IEC 60 529. Use only in
countries where authorized.
Declaration of Conformity
Hereby, Avaya declares that the Avaya 4027,
4070, 4075 DECT Handsets are in
compliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC.
This equipment complies with EMC requirements of Class B.
Safety precautions
Observe the following safety precautions before you use your handset.
CAUTION
Modifications to this equipment not approved by Avaya
can make this equipment noncompliant with the applied
requirements.
Avaya recommends that you use only compatible
headsets.
16
Welcome to Avaya 4027, 4070, 4075 DECT Handsets
WARNING
Do not open the handset when it is switched on or
connected to the charger; doing so can expose you to
high voltage. Only authorised service personnel must
perform repairs.
Do not dispose of defective or used batteries in
municipal waste. Return old batteries to the battery
supplier, a licensed dealer, or a designated collection
facility. Do not destroy batteries.
Do not remove, install, or charge batteries in hazardous
environments (such as explosive environments),
hospitals or vehicles.
If your interior handset becomes wet, do not use a blow
dryer or oven to dry it. Switch off the handset, remove
the battery, shake out excess liquid from the handset,
and let it dry for 72 hours at room temperature.
CAUTION
The handset product contains a magnet. Do not allow
metallic objects to come in contact with the magnet,
because that can deteriorate audio quality and damage
the handset. Do not allow the charger and the battery to
come into contact with conductive objects, such as keys,
paper clips, rings, or bracelets.
Keep the handset at least 10 centimeters away from
other electronic equipment.
WARNING
Keep the charger, handset, and accessories out of
reach of small children.
17
Getting started
Getting started
This section describes the tasks you must complete before you use your
handset.
Use the following information to prepare your handset for use, and to
familiarize yourself with the operation of the handset:
•
“Installing the MEM card and Bluetooth wireless module” (page 18)
•
“Installing the battery pack (4027 and 4070 only)” (page 18)
•
“Installing the charger” (page 20)
•
“Charging the batteries” (page 22)
•
“Charge display” (page 25)
•
“Switching the handset on or off” (page 26)
•
“Display areas” (page 26)
•
“Handset controls” (page 35)
Installing the MEM card and Bluetooth
wireless module
If your handset is supplied with a MEM card or Bluetooth® wireless
technology module, see the following sections:
•
“MEM card installation and removal” (page 231)
•
“Bluetooth wireless technology module installation” (page 234)
Installing the battery pack (4027 and 4070
only)
You must install the battery pack before you can use your handset. The
battery compartment is on the back of the handset as shown in Figure 1.
18
Getting started
Figure 1: Battery pack
Handset
BATTE RY PACK
Battery
pack
To install a battery pack in your handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover.
3. Push the battery pack into the casing as shown in Figure 2.
4. Press the battery pack down until it locks.
5. Replace the battery cover.
19
Getting started
Figure 2: Installing the battery pack
Handset
Battery
pack
Installing the charger
To install the charger, perform the following steps:
1. Place the charger on a flat surface.
2. Connect the AC adapter cable to the terminal on the bottom of the
charger.
3. Connect the adapter to an electrical outlet.
4. Place the handset on the charger as shown in Figure 3.
Note: (4075 only) The Avaya 4075 DECT Handset charger has a slot
that you can use to charge a battery pack without having the battery
pack installed in the phone. See “Charging the battery pack (4075
only)” (page 229) for more details.
20
Getting started
Figure 3: Installing the charger
21
Getting started
Charging the batteries
Place the handset in the charger as shown in the following figure.
Figure 4: Handset installed on charger
CAUTION
The batteries become hot during the charge cycle.
Attention: The handset, if switched off, automatically switches on
when placed in the charger.
Important battery information
Use the battery pack only as directed. Heat or cold reduces the
performance and service life of the batteries. Handsets with hot or cold
batteries can become temporarily out-of-service, even if the batteries are
22
Getting started
fully charged. Charge the batteries only using the DECT Handset charger
supplied with the handset.
Attention: Use a CPC N0162957 charger if you have an Avaya 4027
or 4070 DECT Handset, and a CPC N0206072 charger if
you have an Avaya 4075 DECT Handset.
Charging guidelines
Observe the following when you charge your handset:
•
Charge the battery for at least 6 hours before you use the handset for
the first time. This protective measure extends the service life of the
batteries.
Note: The batteries attain maximum power output only after several
charging and discharging cycles.
•
Do not leave the handset inserted into the charger for more than 30
days without using it.
•
You can charge and discharge the batteries hundreds of times, but
eventually they wear out. If the operating time (talk and standby time)
becomes significantly shorter than usual, replace the batteries.
•
To maintain optimum operating time, periodically discharge the
batteries by leaving the handset off the charger and switched on, until
the handset switches itself off. Use only this method to discharge the
batteries. If you want to accelerate the discharge of the battery, you
can enable the display. For more information about configuring power
save, see “Configuring Power save” (page 195).
Note: Extreme temperatures influence the charging capability of the
batteries.
23
Getting started
Charging and operating times
Discharged batteries require 6 hours to completely recharge. Completely
charged batteries provide the handset with approximately 8 hours of talk
time and 100 hours of standby time.
WARNING
Use only the batteries that Avaya provides or
authorises.
Charge the batteries only using the supplied charger.
Do not replace the batteries in potentially explosive
environments, such as rooms where flammable liquids
or gasses are present.
Do not dispose of batteries in a fire. Recycle or dispose
of batteries in accordance with local regulations.
WARNING
You must charge your handset before you reset the
handset time and date. Every time you remove the
battery pack or switch the handset off it loses the time
and date information; you must manually reset it after
you reinstall the battery pack or switch the handset off
and on.
If your system provides the date and time information to
DECT Handsets, the date and time settings update
automatically when you switch on the handset. Contact
your system administrator to determine if you can use
this feature.
Attention: Your handset displays the battery status accurately after
charging for at least 6 hours.
Attention: You must have a mains connection to operate the charger.
24
Getting started
CAUTION
Do not install the charger, handset, and accessories in
the following locations:
•
near water, moisture, sources of heat, or direct
sunlight
•
near devices that generate strong magnetic fields,
including electrical appliances, fluorescent lamps,
computers, radios, televisions, and fax or telephone
terminals
•
in locations where the handset can be covered or
where excessive dust is present, or in areas subject
to vibration, shock, or extreme temperature
fluctuations
•
in locations with poor ventilation
CAUTION
Use only the plug-in AC adapter and battery type
supplied, and use only approved accessories.
Ensure the mains voltage of the adapter matches the
local mains voltage.
Do not use AC adapters that are visibly damaged
(cracked or broken) and keep the ventilation slits on the
AC adapters free from obstruction.
Attention: The handset, if switched off, automatically switches on
when placed in the charger.
Charge display
A battery charge status symbol appears on the display. When the battery
is nearly discharged, the battery charge status symbol flashes and a
warning tone sounds. If you are on a call when this happens, the handset
switches off after approximately 3 to 5 minutes. If you are not on a call
and the handset is not in the charging station, the message “Battery
empty” appears on the display. You cannot make calls while this
message appears.
25
Getting started
The following table shows the battery charge status icons.
Table 1: Battery charge status icons
Icon
Description
empty
less than 33%
more than 33% and less than 75%
more than 75%
Note: (4075 only) You can configure the LED indicator to flash when
the handset battery is low. When you place the handset on the
charger, the LED indicator turns off. See “Configuring the LED
Indicator (4075 only)” (page 164) for more details.
Switching the handset on or off
To switch your handset on or off, perform the following step:
1. Long press the Clr key to switch your handset on or
off.
Display areas
The Avaya 4027, 4070, 4075 DECT Handsets include a Liquid Crystal
Display (LCD), and the 4070 and 4075 DECT include a backlit dialpad.
The Avaya 4075 DECT Handset also includes an LED indicator above the
display area, to the left of the speaker.
The display is divided into the following three areas:
•
26
“Icon line” (page 27)
Getting started
•
“Dialogue area” (page 29)
•
“Soft key line” (page 33)
The following figure shows the various areas of the display.
Figure 5: Handset display
Icon line
Dialogue
area
Soft key
line
Icon line
The icon line displays the status of the handset. The icons for the level of
radio signal and battery charge status always appear in the icon line.
Other icons appear only when the corresponding functions are active.
The following table shows the icons in the icon line.
Table 2: Icon line icons
Icon
Description
Level of radio signal
Bluetooth wireless connection status
(only for 4070 and 4075 DECT
Handsets)
See Table 18 for Bluetooth wireless
connection status icons.
27
Getting started
Table 2: Icon line icons
Icon
Description
New text message received
Attention: This icon, if active,
appears in place of the Bluetooth
wireless connection icon.
Voice message waiting indication
Dialpad locked
Activated alarm
Attention: This icon, if active,
appears in place of the Dialpad
locked icon.
Missed calls
Ringer deactivated
Caller filter (only for Avaya 4070 and
4075 DECT Handsets)
Attention: This icon, if active,
appears in place of the Ringer
deactivated icon.
Battery charge status.
See Table 1 for Battery status icons.
28
Getting started
Dialogue area
The Dialogue area is the main area of the handset display. The
information that appears in the Dialogue area varies according to the
operational mode of the handset.
Idle mode
In Idle mode, the following information appears in the dialogue area:
•
the name of the DECT system
•
the Directory Number (DN) of the handset
•
the handset name (if configured)
•
the name of the active profile
•
the time and date
If you leave the range of the DECT system, the message “No Network”
appears.
The following figure shows the handset in Idle mode.
Figure 6: Idle mode
For more information about key functions, see “Key functions in Idle
mode” (page 36).
Call mode
In Call mode, the following information appears in the dialogue area:
29
Getting started
•
the number and name (if available) of the calling party for an
incoming call
•
the number and name (if added to your contacts list) of the called
party for an outgoing call
•
the loudspeaker icon (if enabled)
•
the microphone muted icon (if muted)
The following table shows the icons that can appear in the dialogue area
when in Call mode.
Table 3: Dialogue area icons
Icon
Description
Incoming call
Outgoing call
Loudspeaker on
Microphone muted while loudspeaker on
Microphone muted while loudspeaker off
For more information about key functions associated with the icons in the
preceding table, see “Key functions in Call mode” (page 38).
30
Getting started
Dialogue mode
In Dialogue mode, icons or information appear in the Dialogue area
according to the operational mode of the handset
The following figure shows the Missed call(s) page.
Figure 7: Missed call(s) page
For more information about key functions, see “Key functions in Dialogue
mode” (page 40).
Menu mode
In Menu mode, menu items (entries) or menu sections appear in the
dialogue area.
The following figure shows the Main menu.
Figure 8: Main menu
31
Getting started
The following figure shows the General settings menu.
Figure 9: General settings menu
Menu
sections
Menu
items
For more information about key functions see “Key functions in Menu
mode” (page 40).
Edit mode
In Edit mode, you can use the dialogue area to enter and edit digits
(numbers, date, time, or PIN) and text.
The following figure shows the Contacts name editing page.
Figure 10: Contacts name editing page
32
Getting started
The following figure shows the Contact number editing page.
Figure 11: Contacts number editing page
The following figure shows the appointment Start date editing page.
Figure 12: Appointment Start date editing page
For more information about key functions, see “Key functions in Edit
mode” (page 41).
Soft key line
Soft keys appear below the handset dialogue area. The key functions
change automatically according to the operational state of the handset.
For example, when the handset is in idle mode, you can press the Menu
soft key, as shown in Figure 5, to access the Main menu.
LED indicator (4075 only)
An LED indicator appears to the left of the speaker on the Avaya 4075
DECT Handset. This indicator can flash red, green, or orange. Red
33
Getting started
signals a high-priority event, green a medium priority event, and orange a
low-priority event.
You can assign one of the following events to each priority level:
•
Missed calls
•
Text messages
•
Voice messages
•
Text and voice messages
•
Mandown
•
Low battery
For an example of event assignments, see the following table:
Table 4: Example event assignments
Priority
LED Colour
Example event
assignment
High
Red
Low battery
Medium
Green
Missed call
Low
Orange
New message
With these example assignments in place, the following can occur:
•
If you miss a call, the LED indicator flashes green.
•
When the LED indicator is flashing green to indicate a missed call,
and a new message arrives, the LED indicator continues to flash
green because green signal events have a higher priority than orange
signal events.
•
When the LED indicator is flashing green to indicate a missed call,
and the battery becomes low on charge, the LED indicator flashes red
because red signal events have a higher priority than green signal
events.
The LED indicator priorities are permanently assigned (red always
indicates high priority, green medium, and orange low). LED indicator
34
Getting started
priorities do not control the order in which the dialogs for the
corresponding events appear on the display.
See “Configuring the LED Indicator (4075 only)” (page 164) for more
details.
Handset controls
Use the following figure to familiarise yourself with the handset display
and keys.
Figure 13: Handset controls
This section describes the following components and functions of your
Avaya 4027, 4070, or 4075 DECT Handset:
•
“Key functions in Idle mode” (page 36)
•
“Key functions in Call mode” (page 38)
35
Getting started
•
“Key functions in Dialogue mode” (page 40)
•
“Key functions in Menu mode” (page 40)
•
“Key functions in Edit mode” (page 41)
•
“Locking or unlocking the dialpad” (page 45)
Key functions in Idle mode
The following table describes the handset key functions in Idle mode.
Table 5: Keys functions in Idle mode
Key
36
Description
Left soft
key
Press the Calls soft key to access the
Calls menu.
Right soft
key
Press the Menu soft key to access
the Main menu.
Up key
Press the programmable Up
navigation key to access the shortcut
assigned to that key. The default
shortcut assigned is the Contacts
menu.
Down key
Press the programmable Down
navigation key to access the shortcut
assigned to that key. The default
shortcut assigned is the Central
Directory menu.
Left key
Press the programmable Left
navigation key to access the shortcut
assigned to that key. The default
shortcut assigned is the Messaging
menu.
Right key
Press the programmable Right
navigation key to access the shortcut
assigned to that key. The default
shortcut assigned is the Profile
menu.
Getting started
Table 5: Keys functions in Idle mode (Continued)
Key
Description
OK key
Press the OK key, and then the Lock
or Unlock soft key to lock or unlock
the dialpad.
Call key
Press the Call key to initiate a call.
Clear key
Long press the Clr key to switch your
handset on or off.
SOS key
Long press the SOS key to make an
emergency call (if configured).
Attention: You can make an
emergency call using the SOS
key even if the dialpad is locked.
1–9
•
Press the 1–9 keys to enter
predial mode.
•
Long press the 1–9 keys to speed
dial a number (if configured).
0
Press the 0 key to enter predial mode.
*
•
Press the * key to enter predial
mode.
•
Long press the * key to enter a
comma to indicate a pause when
you edit a number.
37
Getting started
Table 5: Keys functions in Idle mode (Continued)
Key
#
Description
•
Press the # key to enter predial
mode.
•
Long press the # key to switch
between the current active profile
and the Silent profile.
For more information about Idle mode, see “Idle mode” (page 29).
Key functions in Call mode
The following table describes the handset key functions in Call mode.
Table 6: Key functions in Call mode
Key
Left soft
key
Right soft
key
38
Description
•
Press the Spk on or Spk off soft
key to turn the loudspeaker on or
off during a call.
•
Press the Silence soft key to
mute the ringer for an incoming
call.
•
Press the Mute soft key to mute
the microphone during a call.
•
Press the Reject soft key to reject
an incoming call.
Up key
Press the Up navigation key to
access the Contacts menu.
Down key
Press the Down navigation key to
access the Central Directory menu
(available only if provided by your
communication system).
Getting started
Table 6: Key functions in Call mode (Continued)
Key
Description
OK key
•
Press the OK soft key to turn the
loudspeaker on or off during a
call.
•
Press the OK key to answer an
incoming call in handsfree mode
(using the loudspeaker).
Call key
Press the Call key to place the
established call on hold (and access a
dial tone if only one call is active) or to
switch between calls if more than one
call is active.
Clear key
Press the Clr key to end a call.
Volume
up key
+
Press the Volume up key to increase
the handset volume during a call.
A beep sounds when you reach the
Max volume level.
Volume
down key
Press the Volume down key to
decrease the handset volume during
a call.
A beep sounds when you reach the
Min volume level.
0–9,*,#
Press the 0–9,*, or # key to enter
digits,*, or #.
For more information about Call mode, see “Call mode” (page 29).
39
Getting started
Key functions in Dialogue mode
The following table describes the handset key functions in Dialogue
mode.
Table 7: Key functions in Dialogue mode
Key
Description
Left soft
key
Press the Left soft key to select the
item marked in the display.
Right soft
key
Press the Right soft key to select the
item marked in the display.
Clear key
Press the Clr key to exit Dialogue
mode.
SOS key
Long press the SOS key to make an
emergency call (if configured).
For more information about Dialogue mode, see “Dialogue mode”
(page 31).
Key functions in Menu mode
The following table describes the handset key functions in Menu mode.
Table 8: Key functions in Menu mode
Key
40
Description
Left soft
key
Press the Left soft key to select the
item marked in the display.
Right soft
key
Press the Right soft key to select the
item marked in the display.
Up key
Press the Up key to position the
cursor.
Getting started
Table 8: Key functions in Menu mode (Continued)
Key
Description
Down key
Press the Down key to position the
cursor.
Left key
Press the Left key to position the
cursor.
Right key
Press the Right key to position the
cursor.
Clear key
•
Press the Clr key to cancel the
current action and to return to the
previous menu.
•
Long press the Clr key to return
to Idle mode.
SOS key
Long press the SOS key to make an
emergency call (if configured).
For more information about Menu mode, see “Menu mode” (page 31).
Key functions in Edit mode
The following table describes the handset key functions in Edit mode.
Table 9: Key functions in Edit mode
Key
Description
Left soft
key
Press the Left soft key to select the
item that is currently highlighted.
Right soft
key
Press the Right soft key to select the
item that is currently highlighted.
41
Getting started
Table 9: Key functions in Edit mode (Continued)
Key
42
Description
Up key
Press the Up key to position the
cursor.
Down key
Press the Down key to position the
cursor.
Left key
Press the Left key to position the
cursor.
Right key
Press the Right key to position the
cursor.
Clear key
•
Press the Clr key to cancel the
current action and to return to the
previous menu.
•
Long press the Clr key to return
to Idle mode.
SOS key
Long press the SOS key to make an
emergency call (if configured).
1
•
Press the 1 key one or more
times to enter the digit (for
example, to enter a number, date,
time, or PIN).
•
Press the 1 key one or more
times to enter a special character.
For more information, see “Key
functions in text mode” (page 44).
Getting started
Table 9: Key functions in Edit mode (Continued)
Key
2–9
0
*
Description
•
Press the 2–9 keys to enter the
digits (for example, to enter a
number, date, time, or PIN).
•
Press the 2–9 keys one or more
times to enter a letter. For more
information, see “Key functions in
text mode” (page 44).
•
Press the 0 key to enter the digit
(for example, to enter a number,
date, time, or PIN).
•
Press the 0 key one or more
times to insert a space or a
punctuation mark. For more
information, see “Key functions in
text mode” (page 44).
•
Press the * key one or more times
to enter a special character. For
more information, see “Key
functions in text mode” (page 44).
•
Long press the * key to enter a
comma when you edit a number.
The comma indicates a pause.
43
Getting started
Table 9: Key functions in Edit mode (Continued)
Key
Description
#
Press the # key to switch between
modes:
•
mode "abc": enter lowercase
characters
•
mode "Abc": enter an uppercase
character followed by lowercase
characters
•
mode "ABC": enter uppercase
characters
•
mode "123": enter digits
You can use your handset keys to enter a number, symbol, or character
in text mode.
The following table shows the keys you can press, (when the handset is
in text mode) to insert letters, numbers, or symbols.
Table 10: Key functions in text mode
Key
Uppercase
Lowercase
1
1£$¥€@%&#§^
1£$¥€@%&#§^
2
ABC2ÆÀÁÂÄÅÇ
abc2æàáäåç
3
DEF3ÈÉÊË
def3èéêë
4
GHI4ÍÎÏ
ghi4íîï
5
JKL5
jkl5
6
MNO6ŒÓÔÖØ
mno6œóôöø
7
PQRS7Šß
pqrs7šß
8
TUV8ÙÚÛÜ
tuv8ùúûü
9
WXYZ9ŸŽ
wxyz9ÿž
44
Getting started
Key
Uppercase
Lowercase
0
(space) . , ? ! 0 : ¿ ¡ “ ‘ ; _ ~
(space) . , ? ! 0 : ¿ ¡ “ ‘ ; _ ~
*
*/+-=()<>{}[]|\
*/+-=()<>{}[]|\
Locking or unlocking the dialpad
Use the dialpad Lock feature to prevent accidental operation of the
handset. When the Lock feature is active and you receive an incoming
call, the dialpad temporarily unlocks so you can answer the call. The Lock
reactivates when you terminate the call.
To lock the dialpad, perform the following step:
Attention: You can dial 911 or 112, or use the SOS key, when the
dialpad is locked.
1. Press the OK key to toggle between the Calls soft
key and the Lock soft key.
Lock
2. Press the Lock soft key.
To unlock the dialpad, perform the following step:
1. Press the OK key
Unlock
2. Press the Unlock soft key within three seconds.
Attention: The Unlock soft key is available for only three seconds
after you press the OK key.
To configure automatic dialpad Lock, see “Automatic dialpad lock”
(page 167).
45
DECT system configuration
DECT system configuration
Use the information in this section to configure your DECT handset to
work with a DECT system.
This section describes the following tasks:
•
“Accessing the Connectivity menu” (page 46)
•
“Subscribing the handset to a DECT system” (page 47)
•
“Manually selecting the DECT system” (page 49)
•
“Enabling automatic DECT system selection” (page 50)
•
“Deregistering the handset” (page 51)
•
“Editing the system name and phone number” (page 51)
For more information about using the handset controls, see “Handset
controls” (page 35).
Accessing the Connectivity menu
To access the Connectivity menu, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the Settings
icon.
Select
3. Press the Select soft key.
4. Press the Left or Right key to highlight the
Connectivity menu.
46
DECT system configuration
Subscribing the handset to a DECT system
You must subscribe the handset to at least one DECT system before you
can use the handset to make a call. The handset can operate with a
maximum of four DECT systems, for which the handset stores the name
of the system in a subscription record. Whenever the handset enters the
range of a subscribed DECT system, the name of the system appears on
the handset display.
Attention: If your supplier preinstalls the handset, you need not
subscribe your handset to a system. When the handset is
not yet subscribed to a system, the message “Register”
appears.
Use the PABX-PIN code to register the handset with a
DECT system.
Before you subscribe to a DECT system, obtain the following information
from your system administrator:
•
PARK code: A system ID that enables your telephone to differentiate
between DECT systems when more than one DECT system is
present.
•
DECT system name: The name of the system to which you subscribe.
After you enter the system name, it appears on the idle display.
•
Phone number: The local phone number assigned to your DECT
handset.
Attention: Once you have obtained your PIN code, you have 15
minutes to subscribe the handset. After 15 minutes have
elapsed, the PIN code is deactivated you must activate a
new one.
To subscribe your handset to a DECT system, perform the following
steps:
1. Open the Connectivity menu as shown in
“Accessing the Connectivity menu” (page 46).
47
DECT system configuration
2. Press the Up or Down key to highlight the Register
option.
Register
Select
Empty
Select
Yes
3. Press the Select soft key to start the registration
process.
4. Press the Up or Down key to choose one of the
following:
If the handset is subscribed to fewer than four
systems, choose Empty
OR
If the handset is already subscribed to four
systems, choose the name of the system to
overwrite.
5. Press the Select soft key, and then press the Yes
soft key if you want to overwrite a system.
The PARK prompt appears.
6. Use the Dialpad to enter the PARK code.
Save
Attention: If more than one DECT system overlaps
in your location, you are sometimes required to
enter a PARK code (system ID). If only one DECT
system is available, make no entry, and press the
Skip soft key.
7. Press the Save soft key.
The PIN prompt appears.
8. Use the Dialpad to enter the PIN (authorisation
code).
OK
48
9. Press the OK soft key.
The Network name prompt appears.
DECT system configuration
10. Use the Dialpad to enter the system name.
Save
11. Press the Save soft key.
The Number prompt appears.
12. Use the Dialpad to enter the phone number
assigned to your handset.
Save
13. Press the Save soft key.
14. Press the Clr key one or more times to return to the
idle display.
You can now use the handset to make and receive calls.
Manually selecting the DECT system
If you subscribe the handset to more than one DECT system, you can
manually select which system the handset uses. To manually select a
DECT system, perform the following steps:
1. Open the Connectivity menu using the steps in
“Accessing the Connectivity menu” (page 46).
2. Press the Up or Down key to highlight the Network
select option.
Network select
Select
3. Press the Select soft key.
Select
4. Choose the name of the system from the list.
5. Press the Select soft key.
The name of the currently active system highlights.
6. Press the Clr key one or more times to return to the
idle display.
49
DECT system configuration
Enabling automatic DECT system selection
If you subscribe the handset to more than one DECT system, you can
configure your handset to automatically select the system to which it
connects.
If Automatic selection is enabled, when the handset moves out of range of
the current system, it automatically attempts to connect and log on to
another available (subscribed) DECT system.
To enable automatic selection of a DECT system, perform the following
steps:
1. Open the Connectivity menu using the steps in
“Accessing the Connectivity menu” (page 46).
2. Press the Up or Down key to highlight the Network
select option.
Network select
Select
Auto. select
Select
3. Press the Select soft key.
4. Highlight Auto. select.
5. Press the Select soft key.
The name of the currently active system highlights.
6. Press the Clr key one or more times to return to the
idle display.
50
DECT system configuration
Deregistering the handset
To deregister the handset from a DECT system, perform the following
steps:
1. Open the Connectivity menu, using the steps in
“Accessing the Connectivity menu” (page 46).
2. Press the Up or Down key to highlight the
Deregister option.
Deregister
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the system
to deregister.
Select
Yes
No
5. Press the Select soft key.
6. Choose one of the following:
Press the Yes soft key to deregister the selected
DECT system.
OR
Press the No soft key to exit without making any
changes.
7. Press the Clr key one or more times to return to the
idle display.
Editing the system name and phone number
To edit the system name and phone number of your handset, perform the
following steps:
1. Open the Connectivity menu using the steps in
“Accessing the Connectivity menu” (page 46).
51
DECT system configuration
2. Press the Up or Down key to highlight the Network
select option.
Network select
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the system
to edit.
5. Press the Select soft key.
Select
6. Choose the name of the system from the list.
Edit
7. Press the Edit soft key.
The name of the currently active system highlights.
8. Use the Dialpad to edit the system name and.
9. Press the Save soft key.
Save
10. Use the Dialpad to edit the local phone number.
11. Press the Save soft key.
Save
12. Press the Clr key one or more times to return to the
idle display.
52
Call features
Call features
Use the information in this section to make and receive calls, and to
configure and use call features:
•
“Make calls” (page 53)
•
“Answer calls” (page 60)
•
“Change settings during a call” (page 62)
•
“Transfer calls” (page 63)
•
“Voice mail” (page 64)
Make calls
This section describes the features associated with making a call. You
can make a call from your handset using any of the following methods:
•
“Dialling a number” (page 54)
•
“Predial mode” (page 54)
•
“Using Speed dial” (page 55)
•
“Using Loudspeaker” (page 55)
•
“Using the telephone book to dial a number” (page 56)
•
“Using the Central Directory to dial a number” (page 57)
•
“Making an SOS call” (page 59)
•
“Making an Emergency call” (page 59)
Attention: To conserve the battery charge of your handset, the display
automatically dims during calls. Press the OK key to restore
the display.
To configure the number of seconds that elapse before the
display dims, change the “first value” timer in Power save
settings. For more information, see “Configuring Power
save” (page 195).
53
Call features
Dialling a number
To dial a number, perform the following steps:
1. Press the Call key.
2. Use the Dialpad to enter the phone number.
You can add additional digits to the number you
dial. For example, in some offices you must add a
digit at the beginning of the number to place a call
to an outside line.
Predial mode
Use the information in this section to enter a phone number before you
dial.
Predialling a number
To predial a number, perform the following steps:
1. Use the Dialpad to enter the phone number.
You can add additional digits to the number you
dial. For example, in some offices you must add a
digit at the beginning of the number to place a call
to an outside line.
2. Press the Call key to dial the number.
OR
Press the OK key to dial the number using the
Loudspeaker.
Editing a number in Predial mode
To edit a number in Predial mode, perform the following steps:
1. Use the Left or Right key to position the insertion
point.
54
Call features
2. Use the Dialpad to enter the new digits.
Press the Clr key to delete individual digits or to
cancel predial.
Long press the * key to insert a comma to indicate
a pause when you enter a number.
3. Press the Call key.
4. Press the Clr key to return to the idle display.
Attention: When you predial a number, if the input cursor is positioned
after the telephone number, the new digits are inserted at
the end of that telephone number. If the input cursor is
positioned at any other point, the new digits are inserted in
front of the insertion point.
Using Speed dial
Use the Speed dial feature to make calls by dialling a one-digit code.
To use speed dial, perform the following step:
1. Long press the number key assigned to the phone
number.
You can use speed dial only after it is configured.
For more information, see “Assigning a speed dial
number” (page 102).
Using Loudspeaker
Your handset includes a Loudspeaker feature to allow several people in a
room to listen to a call. You can predial a call using the Loudspeaker by
first dialling the number, and then pressing the OK key.
When the loudspeaker function is active, the loudspeaker icon appears.
When using loudspeaker:
55
Call features
•
Place the handset upright on a smooth, flat surface, and ensure that
the loudspeaker and microphone free of obstruction.
•
Position the handset approximately 0.5 metres away from yourself
while you speak.
To enable the Loudspeaker feature during a call, perform the following
steps:
1. Make or answer a call.
Spk. on
+
Spk. off
2. Press the Spk. on soft key to enable the feature.
The loudspeaker icon appears.
3. Press the Volume up or Volume down key to
configure the volume.
4. Press the Spk. off soft key to disable the feature.
Using the telephone book to dial a number
To use the handset telephone book to dial a number, perform the
following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Contacts icon.
Select
56
3. Press the Select soft key.
Call features
Private
Select
OR
4. If your communication system supports the Central
Directory feature, press the Up or Down key to
highlight the Private option, and press the Select
soft key.
OR
If your communication system does not support the
Central Directory feature, skip this step.
5. Press the Up or Down keys to select the number
you want to dial.
OR
Enter the first characters of the name using the
dialpad. For example enter “B” to display the first
name in the contacts list starting with the letter B.
For more information, see Table 9, “Key functions
in text mode” (page 44).
6. Press the Call key to make a call.
Using the Central Directory to dial a number
Your handset allows you to use the Central Directory to dial a number.
The Central Directory is a database that contains user names and
Directory Numbers (DN).
Attention: The Central Directory feature is available only if provided by
your communication system.
To use the Central Directory to dial a number, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
57
Call features
2. Press the Up or Down key to highlight the
Contacts icon.
Select
3. Press the Select soft key.
4. Press the Up or Down key to select the Central
Directory option.
Central Directory
Select
5. Press the Select key.
6. Perform one of the following:
Press the OK key and press the Up and Down
keys to select the user you want to dial.
OR
OR
Enter the first characters of the name using the
dialpad. For example enter “B” to display the first
name in the contacts list starting with the letter B.
For more information, see Table 9, “Key functions
in text mode” (page 44).
7. Optionally, press the More soft key to learn the
number of the selected user (Info option).
8. Press the Call key to make a call.
58
Call features
Making an SOS call
Use this option to make emergency calls to a specific telephone number.
When you press the SOS key, the phone sends a text message or
initiates a voice call.
Attention: The Messaging feature is available on Avaya 4070 and
4075 DECT Handsets only.
You must program an SOS number to use the SOS
function. For more information, see “Emergency call
configuration” (page 206).
To make an SOS call, perform the following step:
1. Long press the SOS key to dial the number or send
a message.
Making an Emergency call
When the dialpad is locked, the only calls you can make are SOS calls, or
Emergency calls to 911 or 112.
To make an emergency call when the handset is locked use the following
steps:
1. Dial the number (either 911 or 112)
59
Call features
2. Perform one of the following:
Press the Call key to make the call using the
handset, or using a wired headset if you have one
installed.
OR
OR
Press the OK key or Left soft key to make the call
using the loudspeaker
Note: If you have a Bluetooth wireless technology
headset installed, the handset makes the
emergency call using the Bluetooth headset when
you press Call key, OK key, or Call soft key.
Answer calls
When you receive an incoming call, the ringer sounds and the call alert
symbol flashes. You can choose to answer or reject an incoming call. This
section describes the following features:
•
“Answering a call in Normal mode” (page 61)
•
“Answering a call using any key” (page 61)
•
“Auto-answering mode” (page 61)
•
“Muting the ringer” (page 61)
•
“Rejecting a call” (page 62)
Attention: To conserve the battery charge of your handset, the display
automatically dims during calls. Press the OK key to restore
the display.
To configure the number of seconds that elapse before the
display dims, change the “first value” timer in Power save
settings. For more information, see “Configuring Power
save” (page 195).
60
Call features
Answering a call in Normal mode
To answer a call in Normal mode, perform the following step:
1. Press the Call key (Loudspeaker is off).
OR
Press the OK key (Loudspeaker is on).
v
Answering a call using any key
To answer a call using any key, perform the following step:
1. Press any key on the dialpad to answer the call.
Attention: This feature is available only when configured. For more
information, see “Answer mode configuration” (page 197).
Auto-answering mode
In Auto-answering mode, calls are answered automatically on the
handset.
Attention: This feature is available only when configured. For more
information, see “Answer mode configuration” (page 197).
Muting the ringer
To mute the ringer, perform the following step:
Silence
1. Press the Silence soft key to mute the ringer during
a call alert.
61
Call features
Rejecting a call
To reject an incoming call, perform the following step:
Reject
1. Press the Reject soft key during a call alert.
The call diverts to your voice mail system or
another number if call forward feature is configured.
Contact your system administrator to determine if
you can use this feature.
Attention: If you reject or do not answer a call, or if the call is blocked
by Caller Filter (4070 and 4075 only), the message Number
of missed calls: N Show? appears on the display, where N
is the number of calls that have been blocked, missed, or
rejected.
Press the Yes soft key to open the Missed calls list or press
the No soft key to close the dialogue. For more information,
see “Missed calls list” (page 86).
Change settings during a call
During a call, you can adjust the headset or loudspeaker volume or mute
the handset.
This section describes the following tasks:
•
“Adjusting the headset or loudspeaker volume” (page 62)
•
“Using mute during a call” (page 63)
Adjusting the headset or loudspeaker volume
During a call, you can change the headset or loudspeaker volume using
the volume keys. A bar in the display increases or decreases to indicate
the volume setting. A beep sounds at the minimum or maximum volume.
62
Call features
To adjust the headset or loudspeaker volume, perform the following step:
1. Press the Volume up or Volume down key.
When you adjust the headset or loudspeaker volume, the handset
remembers the new setting the next time you use the handset.
Using mute during a call
To mute and unmute the handset microphone, perform the following
steps:
Mute
1. Press the Mute soft key to deactivate the handset
microphone.
Unmute
2. Press the Unmute soft key to activate the handset
microphone.
Transfer calls
You can use this option to transfer a call or add a third party to a
conference call. The behavior of the Transfer feature can vary depending
on your system configuration. Contact your system administrator to find
out what transfer options are available for your use.
Transferring a call
To transfer a call, perform the following steps:
1. Press the Call key to place the active call on hold.
2. Use the Dialpad to dial the phone number of the
third party.
3. Press the Call key to alternate between the two
callers.
63
Call features
4. Press the Clr key to transfer the call.
Voice mail
Use the Voice mail feature to listen to voice messages left by calling
parties. You can receive a voice mail in the following situations:
•
if your handset is switched off
•
if your handset is busy
•
if your handset is out of the coverage area
A new voice message dialogue appears once per caller, when the caller
leaves a first new message in the mailbox. A voice mail symbol appears
in the icon line and disappears after you play the message.
Attention: The Voice mail feature is available only when configured on
the PBX.
The following figure shows the voice mail display page.
Figure 14: New voice message page
64
Call features
To listen to a New voice message, perform the following step:
Yes
OR
No
1. Choose one of the following:
Press the Yes soft key to listen to the new voice
message. To do so, you must first configure a voice
mail number. See “Defining a voice mail number”
(page 66) for more information.
OR
Press the No soft key to close the dialogue. For
more information, see “Configuring Message
display setting” (page 127).
Note: (4075 only) You can configure the LED indicator to flash when
voice mail messages are waiting. After you have listened to the voice
mail message, the LED indicator turns off. See “Configuring the LED
Indicator (4075 only)” (page 164), for more details.
Use this section to perform the following tasks:
•
“Accessing voice mail” (page 65)
•
“Defining a voice mail number” (page 66)
Accessing voice mail
To access voice mail, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Messaging icon.
Select
3. Press the Select soft key.
4. Press the Left or Right key to select the Inbox
menu.
65
Call features
5. Press the Up or Down key to select the Listen to
voice mail option.
6. Press the Select soft key.
Listen to voice mail
Select
The handset automatically dials the voice mail
access number.
Attention: Ensure that you configure the voice mail
access number in the messaging settings. For
more information about configuring message
settings, see “Defining a voice mail number”
(page 66).
7. Press the Clr key one or more times to return to the
idle display.
Defining a voice mail number
To define a voice mail access number, perform the following steps:
1. Open the Settings menu using the steps in
“Accessing the message Settings menu”
(page 125).
2. Press the Up or Down key to highlight the Voice
mail number option.
Voice mail number
66
Call features
Select
3. Press the Select soft key.
4. Press the Up or Down key to choose one of the
following options:
Enter number
Lookup contact
— Highlight Enter number to use the Dialpad to
enter the number, and then press the Save soft
key. Long press the * key to insert a comma to
indicate a pause.
— Highlight Lookup contact to select the number
from your contacts list, and then press the
Select soft key. Press the Up or Down key to
choose a contact, and press the Select soft
key.
5. Press the Clr key one or more times to return to the
idle display.
Attention: You can also dial the voice mail number directly.
67
Calls list
Calls list
Attention: Some menu items may be locked or unavailable to users.
Please contact your system administrator for more details.
The Calls list stores information about dialled, answered, or missed calls
(maximum 50 entries for all lists).
Attention: The maximum number of entries you can store varies
depending on the amount of storage space used by other
features.
When there is more than one call to or from a phone number, only the
most recent call appears in the appropriate call list.
The Calls menu contains four tabs: All, Answered, Dialled, and Missed.
You can open the required list by pressing the Left or Right key. When
you open the list, the call information appears. The first entry is
highlighted, the contact name or CLID (Calling Line Identification) and the
time and date appear.
Figure 15: Calls list with normal text size
Tabs
CLID
Call time
and date
68
Calls list
Figure 16: Calls list with small text size
Attention: Depending on the selected Time and Date format, the font
size varies, as shown in Figure 16.
If you change the time format to am/pm mode and the date format is dd/
mm/yyyy (for example 06/12/2007), or mm/dd/yyyy (for example 12/06/
2007), or dd-mmm-yyyy (06-Dec-2007), only the date appears in the lists.
You can view the time of the call by following the procedures for viewing
call information which are found in each Calls list section.
This section describes the following features:
•
“All calls list” (page 70)
•
“Answered calls list” (page 75)
•
“Dialled calls list” (page 81)
•
“Missed calls list” (page 86)
The following table describes the Calls list tabs.
Table 11: Calls list tabs
Tab
Description
All calls
Answered calls
69
Calls list
Tab
Description
Dialled calls
Missed calls
All calls list
The All calls list shows all entries from the Answered, Dialled, and Missed
calls lists. The most recent entry appears at the top of the list.
This section describes the following tasks:
•
“Accessing the All calls list” (page 70)
•
“Viewing information about a call” (page 71)
•
“Dialling a number” (page 71)
•
“Transferring a number to your Contacts list” (page 72)
•
“Transferring a number to the caller filter list” (page 73)
•
“Deleting an entry” (page 74)
•
“Deleting all entries” (page 75)
Attention: To conserve the battery charge of your handset, the display
automatically dims during calls. Press the OK key to restore
the display.
To configure the number of seconds that elapse before the
display dims, change the “first value” timer in Power save
settings. For more information, see “Configuring Power
save” (page 195).
Accessing the All calls list
To access the All calls list, perform the following steps:
Calls
70
1. Press the Calls soft key.
Calls list
2. Press the Left or Right key to select the All calls
list.
Viewing information about a call
To view the information about calls in the All calls list, such as time and
date, perform the following steps:
1. Open the All calls list using the steps in “Accessing
the All calls list” (page 70).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the View
option.
View
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Dialling a number
To dial a number from the All calls list, perform the following steps:
1. Open the All calls list using the steps in “Accessing
the All calls list” (page 70).
71
Calls list
2. Press the Up or Down key to highlight the required
entry.
Attention: If you want to predial from the All calls
list, press the More soft key, press the Up or Down
key to highlight the Edit before call option, and
press the Select soft key.
3. Press the Call key to dial the number.
Transferring a number to your Contacts list
To transfer a number from the Missed calls list to a new entry in your
Contacts list, perform the following steps:
1. Open the All calls list using the steps in “Accessing
the All calls list” (page 70).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option.
Save
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the
Contacts option.
Contacts
Select
72
7. Press the Select soft key.
Calls list
Add
8. Press the Add soft key and use the Dialpad to edit
the number and enter the name (if necessary).
Save
9. Press the Save soft key.
Yes
10. Press the Yes soft key to confirm the changes.
11. Press the Clr key one or more times to return to the
idle display.
Transferring a number to the caller filter list
Attention: The Caller filter feature is available on the Avaya 4070 and
4075 DECT Handsets only.
To transfer a number from the All calls list to the caller filter list, perform
the following steps:
1. Open the All calls list using the steps in “Accessing
the All calls list” (page 70).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option.
Save
Select
5. Press the Select soft key.
73
Calls list
6. Press the Up or Down key to highlight the Caller
Filter option.
Caller filter
Select
7. Press the Select soft key.
8. Use the Dialpad to edit the number and enter the
name (if necessary).
Save
9. Press the Save soft key.
10. Press the Clr key one or more times to return to the
idle display.
Deleting an entry
To delete an entry from the All calls list, perform the following steps:
1. Open the All calls list using the steps in “Accessing
the All calls list” (page 70).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Delete
entry option.
Delete entry
5. Press the Select soft key.
Select
Yes
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
74
Calls list
Deleting all entries
To delete all entries from the All calls list, perform the following steps:
1. Open the All calls list using the steps in “Accessing
the All calls list” (page 70).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Delete
all option.
Delete all
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
Answered calls list
The Answered calls list stores information about the answered calls. The
most recent entry appears at the top of the list.
This section describes the following tasks:
•
“Accessing the Answered calls list” (page 76)
•
“Viewing information about an answered call” (page 76)
•
“Dialling a number” (page 77)
•
“Transferring a number to your Contacts list” (page 77)
•
“Transferring a number to the caller filter list” (page 78)
•
“Deleting an entry” (page 79)
75
Calls list
•
“Deleting all entries” (page 80)
Accessing the Answered calls list
To access the Answered calls list, perform the following steps:
Calls
1. Press the Calls soft key.
2. Press the Left or Right key to select the Answered
calls list.
Viewing information about an answered call
To view information about an answered call, such as time and date,
perform the following steps:
1. Open the Answered calls list using the steps in
“Accessing the Answered calls list” (page 76).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the View
option.
View
5. Press the Select soft key.
Select
6. Press the Clr key one or more times to return to the
idle display.
76
Calls list
Dialling a number
To dial a number from the Answered calls list, perform the following steps:
1. Open the Answered calls list using the steps in
“Accessing the Answered calls list” (page 76).
2. Press the Up or Down key to highlight the required
entry.
Attention: If you want to predial from the
Answered calls list, press the More soft key, press
the Up or Down key to highlight the Edit before call
option, and press the Select soft key.
3. Press the Call key to dial the number.
Transferring a number to your Contacts list
To transfer a number from the Missed calls list to a new entry in your
Contacts list, perform the following steps:
1. Open the Answered calls list using the steps in
“Accessing the Answered calls list” (page 76).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option.
Save
5. Press the Select soft key.
Select
77
Calls list
6. Press the Up or Down key to highlight the
Contacts option.
Contacts
Select
7. Press the Select soft key.
Add
8. Press the Add soft key and use the Dialpad to edit
the number and enter the name (if necessary).
Save
9. Press the Save soft key.
Yes
10. Press the Yes soft key to confirm your changes.
11. Press the Clr key one or more times to return to the
idle display.
Transferring a number to the caller filter list
Attention: The Caller filter feature is available on the Avaya 4070 and
4075 DECT Handsets only.
To transfer a number from the Answered calls list to the caller filter list,
perform the following steps:
1. Open the Answered calls list using the steps in
“Accessing the Answered calls list” (page 76).
2. Press the Up or Down key to highlight the required
entry.
More
78
3. Press the More soft key.
Calls list
4. Press the Up or Down key to highlight the Save
option.
Save
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the Caller
Filter option.
Caller filter
Select
7. Press the Select soft key.
8. Use the Dialpad to edit the number and enter the
name (if necessary).
Save
9. Press the Save soft key.
10. Press the Clr key one or more times to return to the
idle display.
Deleting an entry
To delete an entry from the Answered calls list, perform the following
steps:
1. Open the Answered calls list using the steps in
“Accessing the Answered calls list” (page 76).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
79
Calls list
4. Press the Up or Down key to highlight the Delete
entry option.
Delete entry
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
Deleting all entries
To delete all entries from the Answered calls list, perform the following
steps:
1. Open the Answered calls list using the steps in
“Accessing the Answered calls list” (page 76).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Delete
all option.
Delete all
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
80
Calls list
Dialled calls list
The Dialled calls list stores information about dialled calls. The most
recent entry appears at the top of the list.
This section describes the following tasks:
•
“Accessing the Dialled calls list” (page 81)
•
“Viewing information about a dialled call” (page 81)
•
“Dialling a number” (page 82)
•
“Transferring a number to your Contacts list” (page 72)
•
“Transferring a number to the Caller filter list” (page 84)
•
“Deleting an entry” (page 85)
•
“Deleting all entries” (page 85)
Accessing the Dialled calls list
To access the Dialled calls list, perform the following steps:
Calls
1. Press the Calls soft key.
2. Press the Left or Right key to select the Dialled
calls list.
Viewing information about a dialled call
To view information about a dialled call, such as time and date, perform
the following steps:
1. Open the Dialled calls list using the steps in
“Accessing the Dialled calls list” (page 81).
2. Press the Up or Down key to highlight the required
entry.
81
Calls list
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the View
option.
View
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Dialling a number
To dial a number from the Dialled calls list, perform the following steps:
1. Open the Dialled calls list using the steps in
“Accessing the Dialled calls list” (page 81).
2. Press the Up or Down key to highlight the required
entry.
Attention: If you want to predial from the Dialled
calls list, press the More soft key, press the Up or
Down key to highlight the Edit before call option,
and then press the Select soft key.
3. Press the Call key to dial the number.
Transferring a number to your contacts list
To transfer a number from the Missed calls list to a new entry in your
Contacts list, perform the following steps:
1. Open the Dialled calls list using the steps in
“Accessing the Dialled calls list” (page 81).
82
Calls list
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option.
Save
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the
Contacts option.
Contacts
Select
7. Press the Select soft key.
Add
8. Press the Add soft key and use the Dialpad to edit
the number and enter the name (if necessary).
Save
9. Press the Save soft key.
Yes
10. Press the Yes soft key to confirm the changes.
11. Press the Clr key one or more times to return to the
idle display.
83
Calls list
Transferring a number to the Caller filter list
Attention: The Caller filter feature is available on the Avaya 4070 and
4075 DECT Handsets only.
To transfer a number from the Dialled calls list to the Caller filter list,
perform the following steps:
1. Open the Dialled calls list using the steps in
“Accessing the Dialled calls list” (page 81).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option.
Save
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the Caller
filter option.
Caller filter
Select
7. Press the Select soft key.
8. Use the Dialpad to edit the number and enter the
name (if necessary).
Save
9. Press the Save soft key.
10. Press the Clr key one or more times to return to the
idle display.
84
Calls list
Deleting an entry
To delete an entry from the Dialled calls list, perform the following steps:
1. Open the Dialled calls list using the steps in
“Accessing the Dialled calls list” (page 81).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Delete
entry option.
Delete entry
Select
5. Press the Select soft key.
Yes
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
Deleting all entries
To delete all entries from the Dialled calls list, perform the following steps:
1. Open the Dialled calls list using the steps in
“Accessing the Dialled calls list” (page 81).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
85
Calls list
4. Press the Up or Down key to highlight the Delete
all option.
Delete all
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
Missed calls list
The Missed calls list stores information about unanswered calls. The most
recent entry appears at the top of the list.
Note: (4075 only) You can configure the LED indicator to flash when
you have missed calls. After you view information about missed calls,
the LED indicator turns off. See “Configuring the LED Indicator (4075
only)” (page 164), for more details.
The Missed calls list includes the following features:
•
Recently missed (unanswered, rejected or blocked by Caller filter
(4070 and 4075 only)) and unchecked calls are bolded.
Attention: If you configure the handset to display the time using am/
pm, the date appears for recently missed unchecked calls,
but the time does not appear.
•
When you do not answer a call, or a call is rejected or blocked by
Caller Filter (4070 and 4075 only), the handset stores the number in
the Missed calls list.
•
If you answer a call from a number in the Missed calls list, the
handset moves the number from the Missed calls list to the Answered
calls list.
86
Calls list
•
If you dial a number from the Missed calls list, the number
automatically moves from the Missed calls list to the Dialled calls list.
This section describes the following tasks:
•
“Accessing the Missed calls list” (page 87)
•
“Viewing information about a missed call” (page 88)
•
“Dialling a number” (page 89)
•
“Transferring a number to your Contacts list” (page 89)
•
“Transferring a number to the Caller filter list” (page 90)
•
“Deleting an entry” (page 91)
•
“Deleting all entries” (page 92)
The following table shows the missed call icons.
Table 12: Missed calls icon
Icon
Description
Unanswered or rejected call
Blocked call by Caller filter (4070 and 4075
only)
Accessing the Missed calls list
When the message “Number of missed calls: N Show?” appears, you
have missed one or more calls (N is the number of calls you missed).
Note: The message “Number of missed calls: N Show?” indicates
the total number of missed calls, including both new calls and calls
you have already checked in the Missed calls list.
87
Calls list
To access the Missed calls list, perform the following steps:
Yes
OR
Calls
1. When the message “Number of missed calls: N
Show?” appears, perform one of the following:
Press the Yes soft key.
OR
Press the Calls soft key, and then press the Left or
Right key to select the Missed calls list.
The list of missed calls appears.
Viewing information about a missed call
To view the information about a missed call, such as time and date,
perform the following steps:
1. Open the Missed calls list using the steps in
“Accessing the Missed calls list” (page 87).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the View
option.
View
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
88
Calls list
Dialling a number
To dial a number from the Missed calls list, perform the following steps:
1. Open the Missed calls list using the steps in
“Accessing the Missed calls list” (page 87).
2. Press the Up or Down key to highlight the required
entry.
Attention: To predial from the Missed calls list,
press the More soft key, press the Up or Down key
to highlight the Edit before call option, and press
the Select soft key.
3. Press the Call key to dial the number.
Transferring a number to your Contacts list
To transfer a number from the Missed calls list to a new entry in your
Contacts list, perform the following steps:
1. Open the Missed calls list using the steps in
“Accessing the Missed calls list” (page 87).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save
option.
Save
Select
5. Press the Select soft key.
89
Calls list
6. Press the Up or Down key to highlight the
Contacts option.
Contacts
Select
7. Press the Select soft key.
Add
8. Press the Add soft key and use the Dialpad to edit
the number and enter the name (if necessary).
Save
9. Press the Save soft key.
Yes
10. Press the Yes soft key to confirm the changes.
11. Press the Clr key one or more times to return to the
idle display.
Transferring a number to the Caller filter list
Attention: The Caller filter feature is available only on the Avaya 4070
and 4075 DECT Handsets.
To transfer a number from the Missed calls list to the Caller filter list,
perform the following steps:
1. Open the Missed calls list using the steps in
“Accessing the Missed calls list” (page 87).
2. Press the Up or Down key to highlight the required
entry.
More
90
3. Press the More soft key.
Calls list
4. Press the Up or Down key to highlight the Save
option.
Save
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the Caller
Filter option.
Caller filter
Select
7. Press the Select soft key.
8. Use the Dialpad to edit the number and enter the
name (if necessary).
Save
9. Press the Save soft key.
10. Press the Clr key one or more times to return to the
idle display.
Deleting an entry
To delete an entry from the Missed calls list, perform the following steps:
1. Open the Missed calls list using the steps in
“Accessing the Missed calls list” (page 87).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
91
Calls list
4. Press the Up or Down key to highlight the Delete
entry option.
Delete entry
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
Deleting all entries
To delete all entries from the Missed calls list, perform the following steps:
1. Open the Missed calls list using the steps in
“Accessing the Missed calls list” (page 87).
2. Press the Up or Down key to highlight the required
entry.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Delete
all option.
Delete all
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
92
Contacts
Contacts
Attention: Some menu items may be locked or unavailable to users.
Please contact your system administrator for more details.
You can use your handset to store contact numbers and names.
The Contacts menu allows you to store a maximum of 50 phone numbers
and names without a MEM card, or a maximum of 200 with an installed
MEM card. You can search for names in the Contacts list.
Attention: The maximum number of entries you can store varies
depending on the amount of storage space used by other
features.
The following restrictions apply:
•
Each entry must have a unique name, however, you can store the
same number under more than one name.
•
Each entry can include a maximum of 16 characters in the name, and
a maximum of 32 digits in the contact number.
•
Each entry can contain up to 4 numbers. You can identify each
number using one of the following types: work, mobile, home, or
other.
•
If you receive a call from a caller whose number is in the Contact list,
the caller name appears on the display.
This section describes the following tasks.
•
“Accessing the Contacts menu” (page 94)
•
“Adding a new contact” (page 94)
•
“Adding a contact number” (page 95)
•
“Editing a contact number” (page 96)
•
“Deleting a contact number” (page 98)
93
Contacts
•
“Editing a contact name” (page 99)
•
“Editing a contact ringtone” (page 100)
•
“Deleting a contact” (page 101)
•
“Speed dial feature” (page 101)
•
“Transfer numbers to your contacts list” (page 104)
•
“Transferring numbers to the caller filter list” (page 104)
Accessing the Contacts menu
To access the Contacts menu, perform the following steps:
Menu
1. Press the Menu soft key.
2. Press the Up or Down key to highlight the
Contacts icon.
3. Press the Select soft key.
Select
Attention: If your communication system supports
the Central Directory feature, press the Up or
Down key to highlight the Private option, and then
press the Select soft key.
Adding a new contact
To add a new contact, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
New contact
Add
94
2. Highlight the New contact option.
3. Press the Add soft key.
Contacts
4. Use the Dialpad to enter the phone number.
Long press the * key to insert a comma to indicate
a pause when you enter a number.
Save
5. Press the Save soft key.
6. Use the Dialpad to enter the name.
Save
7. Press the Save soft key.
Yes
8. Press the Yes soft key to the save the contact.
9. Press the Clr key one or more times to return to the
idle display.
Adding a contact number
A contact can have more than one number associated with it; a maximum
of 50 phone numbers without a MEM card, or a maximum of 200 with an
installed MEM card. To add an additional number to a contact, perform
the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose the contact to
edit.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Edit
contact option.
Edit contact
Select
5. Press the Select soft key.
95
Contacts
6. Press the Up or Down key to highlight the New
number option.
New number
Add
7. Press the Add soft key to add a new number for
this contact.
8. Press the Up or Down key to highlight the required
number type.
OK
9. Press the OK soft key.
10. Use the Dialpad to enter the phone number.
Save
11. Press the Save soft key.
Save
12. Press the Save soft key.
Yes
13. Press the Yes soft key to confirm the changes.
14. Press the Clr key one or more times to return to the
idle display.
Editing a contact number
To edit a contact number, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose the contact to
edit.
3. Press the More soft key.
More
96
Contacts
4. Press the Up or Down key to highlight the Edit
contact option.
Edit contact
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the number
you want to edit.
Attention: If more than one number is stored for
the contact you select, select the number you want
to edit; you cannot restore information once you
edit it.
‘
Edit
7. Press the Edit soft key.
8. Press the Up or Down key to highlight the required
number type.
OK
9. Press the OK soft key.
10. Use the Dialpad to edit the phone number.
Save
Save
Yes
11. Press the Save soft key.
12. Press the Save soft key.
13. Press the Yes soft key to confirm the changes.
14. Press the Clr key one or more times to return to the
idle display.
97
Contacts
Deleting a contact number
To delete a contact number, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose the contact to
edit.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Edit
contact option.
5. Press the Select soft key.
Edit contact
Note: You can delete the number only if more than
one number is stored for the contact you select.
Select
6. Press the Up or Down key to highlight the number
you want to delete.
Edit
Attention: If more than one number is stored for
the contact you select, select the number you want
to delete; you cannot restore information once you
delete it.
7.
OK
98
Press the Edit soft key.
8. Press the OK soft key.
Clear
9. Press the Clear soft key to delete the number.
Save
10. Press the Save soft key.
Save
11. Press the Save soft key.
Yes
12. Press the Yes soft key to confirm the changes.
Contacts
13. Press the Clr key one or more times to return to the
idle display.
Editing a contact name
To edit a contact name, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose the contact to
edit.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Edit
contact option.
Edit contact
Select
5. Press the Select soft key.
6. Press the Left or Right key to choose the Name
menu.
Edit
7. Press the Edit soft key.
8. Use the Dialpad to edit the contact name.
Save
9. Press the Save soft key.
Yes
10. Press the Yes soft key to confirm the changes.
11. Press the Clr key one or more times to return to the
idle display.
99
Contacts
Editing a contact ringtone
To change a contact ringtone, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose the contact to
edit.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Edit
contact option.
Edit contact
Select
5. Press the Select soft key.
6. Press the Left or Right key to choose the
Ringtone menu.
Edit
7. Press the Edit soft key.
Note: The ringtone you assign to a contact applies
to all numbers associated with that contact.
8. Press the Up or Down key to highlight the required
ringtone.
Select
9. Press the Select soft key.
Save
10. Press the Save soft key.
Yes
11. Press the Yes soft key to confirm the changes.
12. Press the Clr key one or more times to return to the
idle display.
100
Contacts
Deleting a contact
To delete a contact, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose the contact to
delete.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Delete
contact option and press the Select soft key.
OR
Delete contact
Delete all contacts
Select
Yes
Press the Up or Down key to highlight the Delete
all contacts option to delete all contacts and press
the Select soft key.
5. Press the Yes soft key to delete the contact.
6. Press the Clr key one or more times to return to the
idle display.
Speed dial feature
Use the Speed dial feature to place calls by dialling a one-digit code. To
dial a number using Speed dial, ensure that your handset is in idle mode
and long press the key to which you assigned the number.
Attention: Only the first number added to the contact can be assigned
to a Speed Dial key.
This section describes the following tasks:
•
“Assigning a speed dial number” (page 102)
•
“Reassigning the speed dial number” (page 102)
101
Contacts
•
“Clearing the speed dial number” (page 103)
Assigning a speed dial number
To assign a speed dial number, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose the required
contact.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Speed
dial option.
Speed dial
5. Press the Up or Down key to choose a digit for the
speed dial.
Add
6. Press the Add soft key.
7. Press the Clr key one or more times to return to the
idle display.
Reassigning the speed dial number
To reassign a speed dial number, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
102
Contacts
2. Press the Up or Down key to choose a new contact
for which to configure a speed dial number.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Speed
dial option.
Speed dial
5. Press the Up or Down key to choose the assigned
digit for speed dial.
Replace
6. Press the Replace soft key.
7. Press the Clr key one or more times to return to the
idle display.
Clearing the speed dial number
To clear a speed dial assignment, perform the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
2. Press the Up or Down key to choose a contact.
3. Press the More soft key.
More
4. Press the Up or Down key to highlight the Speed
dial option.
Speed dial
103
Contacts
5. Press the Up or Down key to choose the digit
assigned for speed dial.
Delete
6. Press the Delete soft key.
7. Press the Clr key one or more times to return to the
idle display.
Transfer numbers to your contacts list
You can transfer phone numbers from any calls list to your contacts list.
See the following sections for information about transferring a number to
your contacts list:
•
To transfer a number from the All calls list, see “Transferring a
number to your Contacts list” (page 72).
•
To transfer a number from the Answered calls list, see “Transferring a
number to your Contacts list” (page 77).
•
To transfer a number from the Dialled calls list, see “Transferring a
number to your contacts list” (page 82).
•
To transfer a number from the Missed calls list, see “Transferring a
number to your Contacts list” (page 89).
Transferring numbers to the caller filter list
Attention: The Caller filter feature is available on the Avaya 4070 and
4075 DECT Handsets only.
To transfer a number to the Caller filter list from the contacts list, perform
the following steps:
1. Open the Contacts menu using the steps in
“Accessing the Contacts menu” (page 94).
Select
104
Contacts
2. Press the Up or Down key to choose the contact to
edit.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save in
caller filter option.
Save in caller filter
Select
5. Press the Select soft key.
6. Use the Dialpad to edit the number and name (if
necessary).
Save
7. Press the Save soft key.
8. Press the Clr key one or more times to return to the
idle display.
105
Contacts
106
Messaging
Messaging
Attention: Some menu items may be locked or unavailable to users.
Please contact your system administrator for more details.
You can send and receive text messages using the Avaya 4070 and 4075
DECT Handsets.
Attention: The Messaging feature is not available on the Avaya 4027
DECT Handset.
Note: (4075 only) You can configure the LED indicator to flash when
you have new (unread) text messages. After you check the
messages, the LED indicator turns off. See “Configuring the LED
Indicator (4075 only)” (page 164) for more details.
This section describes the following tasks:
•
“Message limitations” (page 108)
•
“New messages and drafts” (page 108)
•
“Inbox” (page 114)
•
“Sent messages” (page 121)
•
“Message settings” (page 125)
•
“Configuring Message display setting” (page 127)
•
“Message list full” (page 132)
Attention: The Messaging feature is available only if supported by
your communication system. Contact your system
administrator to determine if you can use this feature.
107
Messaging
Message limitations
The following limitations apply to the Messaging feature:
•
With a MEM card installed, the system can store up to 80 messages.
Attention: The maximum number of messages you can store can be
less than 80, depending on how much memory is used by
other features.
•
You can send or receive messages if your handset is in range of a
DECT system to which the handset is subscribed.
•
An error beep sounds if the message is undelivered.
•
If you receive a message while you are making changes in a menu,
the phone exits from the menu, and any entries that you have not yet
saved are lost. Similarly, if you receive a message while you are
dialing, the phone number you are dialing is lost, and if you receive a
message while you are writing a text message, the text of the
message you are writing is lost.
New messages and drafts
This section describes the following tasks:
•
“Accessing the Messaging menu” (page 108)
•
“Saving a new message or editing a draft” (page 109)
•
“Sending a message” (page 110)
•
“Deleting a draft message” (page 112)
•
“Deleting all draft messages” (page 113)
Accessing the Messaging menu
To access the Messaging menu, perform the following steps:
Menu
108
1. Press the Menu soft key to access the Main menu.
Messaging
2. Press the Up or Down key to highlight the
Messaging icon.
Select
3. Press the Select soft key.
The following table describes the message icons.
Table 13: Menu section icons
Icon
Description
Draft message
Inbox message
Outbox message
Message settings
Saving a new message or editing a draft
To save a new message or edit a draft, perform the following steps:
1. Open the Messaging menu using the steps in
“Accessing the Messaging menu” (page 108).
2. Press the Left or Right key to choose the New and
draft option.
109
Messaging
3. Press the Up or Down key to highlight the New
Message option or the existing draft.
New message
4. Use the Dialpad to create or edit the message.
5. Press the Clr key.
Yes
6. Press the Yes soft key to save the message as a
draft.
Sending a message
To send a new message or draft, perform the following steps:
1. Open the Messaging menu using the steps in
“Accessing the Messaging menu” (page 108).
2. Press the Left or Right key to choose the New and
draft option.
3. Press the Up or Down key to highlight the new
message or the existing draft.
4. Use the Dialpad to edit the message (if necessary).
110
Messaging
Send
5. Press the Send soft key.
6. Press the Up or Down key to select Normal or
Urgent.
Normal
Urgent
Select
Attention: For more information about normal and
urgent messages, see “Configuring Message
display setting” (page 127).
7. Press the Select soft key,
8. Press the Up or Down keys to choose any of the
following options:
Lookup contact
Enter number
Send to many
— Lookup contact to choose the number from
your contacts list.
— Enter number to use the Dialpad to enter the
number of the addressee.
— Send to many to send the same text message
to multiple recipients. The Contact list appears;
choose the contact name and number of the
first recipient.
— Central Directory to choose the user from the
Central Directory (available only if provided by
your communication system).
Note: You can use the Send to many option to
send messages only to numbers that are in the
Contact list.
Send
9. Press the Send soft key.
111
Messaging
10. Optionally, if you selected Send to many in step 6,
perform the following:
Send to many
a. Choose another contact name and number.
b. Press the Send soft key.
c.
Send
Repeat steps a and b until you have sent the
message to all of the recipients.
11. Press the Clr key one or more times to return to the
idle display.
Alternatively, you can send a message to an addressee using your
Central Directory (available only if provided by your communication
system): Follow steps 1-6 of section “Using the Central Directory to dial a
number” , then select the More menu and select the Send message
option.
Deleting a draft message
To delete a draft message, perform the following steps:
1. Open the Messaging menu using the steps in
“Accessing the Messaging menu” (page 108).
2. Press the Left or Right key to choose the New and
draft option.
3. Press the Up or Down key to highlight the existing
draft.
More
Delete message
112
4. Press the More soft key.
5. Press the Up or Down key to select the Delete
message option.
Messaging
Select
Yes
6. Press the Select soft key.
7. Press the Yes soft key to confirm the changes.
8. Press the Clr key one or more times to return to the
idle display.
Deleting all draft messages
To delete all draft messages, perform the following steps:
1. Open the Messaging menu using the steps in
“Accessing the Messaging menu” (page 108).
2. Press the Left or Right key to choose the New and
draft option.
3. Press the Up or Down key to highlight the existing
draft.
More
4. Press the More soft key.
5. Press the Up or Down key to select Delete all
messages.
Delete all messages
Select
Yes
6. Press the Select soft key.
7. Press the Yes soft key to confirm the changes.
8. Press the Clr key one or more times to return to the
idle display.
113
Messaging
Inbox
This section describes the following tasks:
•
“Accessing the Messaging Inbox” (page 114)
•
“Reading a message” (page 115)
•
“Replying to a message” (page 115)
•
“Forwarding a message” (page 116)
•
“Saving a number to the contacts list” (page 118)
•
“Deleting a message” (page 118)
•
“Deleting all messages from the Inbox” (page 119)
Accessing the Messaging Inbox
To access the Messaging Inbox, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Messaging icon.
3. Press the Select soft key.
Select
4. Press the Left or Right key to choose the Inbox
menu section.
114
Messaging
Reading a message
To read a message that you have received, perform the following steps:
1. Open the Inbox using the steps in “Accessing the
Messaging Inbox” (page 114).
2. Press the Up or Down key to highlight the
message you want to read.
Select
3. Press the Select soft key to read the message.
4. Press the Up or Down key to scroll through the text
of the message.
5. Press the Clr key one or more times to return to the
idle display.
Replying to a message
To reply to a message, perform the following steps:
1. Open the Inbox using the steps in “Accessing the
Messaging Inbox” (page 114).
2. Press the Up or Down key to highlight the
message to which you want to reply.
Select
3. Press the Select soft key to read the message.
4. Press the Up or Down key to scroll through the text
of the message.
115
Messaging
Reply
5. Press the Reply soft key.
6. Use the Dialpad to enter the message you want to
send.
Send
7. Press the Send soft key.
8. Press the Up or Down key to select Normal or
Urgent.
Normal
Urgent
Select
Attention: For more information, see “Configuring
Message display setting” (page 127).
9. Press the Select soft key.
Forwarding a message
To forward a message, perform the following steps:
1. Open the Inbox using the steps in “Accessing the
Messaging Inbox” (page 114).
2. Press the Up or Down key to highlight the message
you want to forward.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Forward
option.
Forward
5. Optionally, use the Dialpad to edit the message.
116
Messaging
Send
6. Press the Send soft key.
7. Press the Up or Down key to select Normal or
Urgent.
Normal
Urgent
Attention: For more information, see “Configuring
Message display setting” (page 127).
8. Press the Select soft key.
Select
9. Press the Select soft key
10. Press the Up or Down key to choose any of the
following options:
Lookup contact
Enter number
Send to many
Central Directory
— Lookup contact to choose the number from
your contacts list.
— Enter number to use the Dialpad to enter the
number of the addressee.
— Send to many to choose several numbers from
your contact list.
— Central Directory to choose the user from the
Central Directory (if available)
Send
11. Press the Send soft key to send the message.
12. Press the Clr key one or more times to return to the
idle display.
117
Messaging
Saving a number to the contacts list
To save a number from the Inbox to your contacts list, perform the
1. Open the Inbox using the steps in “Accessing the
Messaging Inbox” (page 114).
2. Press the Up or Down key to highlight a message.
More
3. Press the More soft key.
4. Press the Up or Down key to highlight the Save to
contacts option.
Save to contacts
Add
5. Press the Add soft key.
6. Optionally, use the dialpad to edit the number and
enter the name.
Save
7. Press the Save soft key.
Yes
8. Press the Yes soft key to confirm the changes.
9. Press the Clr key one or more times to return to the
idle display.
following steps:
Deleting a message
To delete a message from the Inbox, perform the following steps:
1. Open the Inbox using the steps in “Accessing the
Messaging Inbox” (page 114).
118
Messaging
2. Press the Up or Down key to highlight the
message you want to delete.
More
3. Press the More soft key.
4. Press the Up or Down key to select the Delete
message option.
Delete message
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
Deleting all messages from the Inbox
To delete all messages from the Inbox, perform the following steps:
1. Open the Inbox using the steps in “Accessing the
Messaging Inbox” (page 114).
2. Press the Up or Down key to highlight a message.
More
Delete all messages
Select
Yes
3. Press the More soft key.
4. Press the Up or Down key to select the Delete all
messages option.
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
119
Messaging
7. Press the Clr key one or more times to return to the
idle display.
120
Messaging
Sent messages
This section describes the following tasks:
•
“Accessing the Sent Messages menu” (page 121)
•
“Reading a sent message” (page 121)
•
“Forwarding a sent message” (page 122)
•
“Deleting a sent message” (page 123)
•
“Deleting all sent messages” (page 124)
Accessing the Sent Messages menu
To access the Sent Messages menu, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Messaging icon
Select
3. Press the Select soft key.
4. Press the Left or Right key to choose the Sent
menu section.
Reading a sent message
To read a sent message, perform the following steps:
1. Open the Sent menu using the steps in “Accessing
the Sent Messages menu” (page 121).
121
Messaging
2. Press the Up or Down key to highlight the sent
message.
View
3. Press the View soft key to read the message.
4. Press the Up or Down key to scroll through the text
of the message.
5. Press the Clr key one or more times to return to the
idle display.
Forwarding a sent message
To forward a sent message, perform the following steps:
1. Open the Sent menu using the steps in “Accessing
the Sent Messages menu” (page 121).
2. Press the Up or Down key to highlight the sent
message to forward.
More
3. Press the More soft key.
4.
Press the Up or Down key to highlight the Edit
option.
Edit
5. Use the Dialpad to edit the sent message (if
necessary).
Send
122
6. Press the Send soft key.
Messaging
7. Press the Up or Down key to select Normal or
Urgent.
Normal
For more information, see “Configuring Message
display setting” (page 127).
Urgent
Select
8. Press the Select soft key and press the Up or
Down key to choose any of the following options:
— Lookup contact to choose the number from
your contacts list.
Lookup contact
Enter number
Send to many
— Enter number to use the Dialpad to enter the
number of the addressee.
— Send to many to choose several numbers
from your contacts list.
— Central Directory to choose the user from the
Central Directory (if available)
Send
9. Press the Send soft key to send the message.
10. Press the Clr key one or more times to return to the
idle display.
Deleting a sent message
To delete a sent message, perform the following steps:
1. Open the Sent menu using the steps in “Accessing
the Sent Messages menu” (page 121).
2. Press the Up or Down key to highlight the sent
message to delete.
123
Messaging
More
3. Press the More soft key.
4. Press the Up or Down key to select the Delete
message option.
Delete message
Select
Yes
5. Press the Select soft key and then press the Yes
soft key to confirm the changes.
6. Press the Clr key one or more times to return to the
idle display.
Deleting all sent messages
To delete all sent messages, perform the following steps:
1. Open the Sent menu using the steps in “Accessing
the Sent Messages menu” (page 121).
2. Press the Up or Down key to highlight any sent
message.
More
3. Press the More soft key.
4. Press the Up or Down key to select the Delete all
messages option.
Delete all messages
Select
Yes
5. Press the Select soft key.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
124
Messaging
Message settings
This section describes the following tasks:
•
“Accessing the message Settings menu” (page 125)
•
“Configuring the Overwrite option” (page 125)
•
“Managing sent messages” (page 127)
•
“Configuring Message display setting” (page 127)
•
“Configuring Automatic Answer setting” (page 128)
•
“Configuring Silent Answer setting” (page 129)
•
“Using the Central Directory to dial a number” (page 57)
Accessing the message Settings menu
To access the message Settings menu, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Messaging icon.
Select
3. Press the Select soft key.
4. Press the Left or Right key to choose Settings.
Configuring the Overwrite option
Use the Overwrite option to control what happens when the handset
receives a new message, but there is no room to store more messages.
125
Messaging
When there is no room to store an incoming message, the handset does
one of the following:
•
If the Overwrite option is enabled, the oldest message stored on the
phone is overwritten.
•
If the Overwrite option is disabled, the handset does one of the
following:
— for urgent messages, the handset shows the message but does
not store it.
— for normal messages, the handset rejects the message.
To configure the overwrite option, perform the following steps:
1. Open the message Settings menu using the steps
in “Accessing the message Settings menu”
(page 125).
2. Press the Up or Down key to highlight the
Overwrite old option.
Overwrite old
Select
on
3. Press the Select soft key.
4. Press the Up or Down key to choose one of the
following:
on
OR
off.
OR
off
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
126
Messaging
Managing sent messages
Use this option to choose whether sent messages are stored in the
handset:
•
If the Sent message option is enabled, sent messages are stored in
the handset.
•
If the Sent message option is disabled, sent messages are not stored.
To configure the sent message option, perform the following steps:
1. Open the message Settings menu using the steps
in “Accessing the message Settings menu”
(page 125).
2. Press the Up or Down key to highlight the Sent
message option.
Sent message
Select
on
3. Press the Select soft key.
4. Press the Up or Down key to choose one of the
following:
on
OR
off.
OR
off
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Configuring Message display setting
Use this setting if you want the text of the message to be displayed on the
screen of the handset when the message is received.
127
Messaging
To configure the Message display setting, perform the following steps:
1. Open the message Settings menu using the steps
in “Accessing the message Settings menu”
(page 125).
2. Press the Up or Down key to highlight the Display
option.
Select
on
3. Press the Select soft key.
4. Press the Up or Down key to choose one of the
following:
on
OR
off.
OR
off
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Configuring Automatic Answer setting
Use this setting to allow the handset, when receiving special messages,
to disconnect the current call with audible indication and set up the new
voice call.
1. Open the message Settings menu using the steps
in “Accessing the message Settings menu”
(page 125).
128
Messaging
2. Press the Up or Down key to highlight the Auto
answer msg option.
Auto answer msg
Select
on
3. Press the Select soft key.
4. Press the Up or Down key to choose one of the
following:
on
OR
off.
OR
off
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Configuring Silent Answer setting
Use this setting to allow the handset, when receiving special messages,
to disconnect the current call without an audible indication and set up the
new voice call.
1. Open the message Settings menu using the steps
in “Accessing the message Settings menu”
(page 125).
2. Press the Up or Down key to highlight the Silent
answer msg option.
Silent answer msg
Select
3. Press the Select soft key.
129
Messaging
on
4. Press the Up or Down key to choose one of the
following:
on
OR
off.
OR
off
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Normal and urgent messages
The system differentiates between normal and urgent messages, which
the handset signals with different ringer melodies.
•
Normal messages
You need not confirm normal messages. If you enable normal
message display, normal messages appear on the display
immediately upon receipt. If you disable normal message display,
normal messages do not appear.
The melody for normal messages plays when you receive a
message, unless you disable the ringer. A short alert tone sounds if
you receive a normal message during a call.
•
Urgent messages
You must confirm urgent messages. Urgent messages appear
immediately on the display.
If the dialpad on your handset is locked, the lock temporarily
deactivates when you receive an urgent message so that you can
acknowledge the receipt.
A melody plays when you receive an urgent message, unless you
disable the ringer. The ringer volume increases to the maximum
during the signalling process. If you receive an urgent message
during a call, a repeated alert tone sounds.
This section describes the following tasks:
130
Messaging
•
“Confirming urgent messages” (page 131)
Confirming urgent messages
You must confirm the receipt of an urgent message. If you do not confirm
an urgent message within 60 seconds, the system notifies the originator
that the message was not delivered.
When you receive an urgent message, perform the following step:
OK
1. Press OK or More to confirm the receipt of a
message.
All other keys are blocked until you confirm the
message by pressing OK or More.
If you press the More soft key, you need to select
one of the available options:
— Reply - reply to the received message
— Ok - confirm the receipt of the message
— Reject - reject the received message
— Forward - forward the message to another
addressee
— Save to contacts - add the sender of the
message to Contacts
— Delete message
— Delete all messages
Attention: If you press the More soft key and do
not select an option within 60 seconds, the sender
of the message is informed that the message was
not received.
131
Messaging
Attention: The maximum number of entries you
can store varies, depending on the amount of
storage space used by other features.
Message list full
The message list can store a maximum of 80 messages if a MEM card is
installed; if the MEM card is full, the message “Storage full” appears, and
the system handles new messages according to the overwrite setting.
You can configure how your handset handles new messages once the
message list is full:
•
if Overwrite is on, the handset deletes the oldest message before it
stores the new message.
•
if Overwrite is off (this is the default configuration), the handset does
one of the following:
— for urgent messages, the handset shows the message but does
not store it.
— for normal messages, the handset rejects the message.
For more information about configuring Overwrite, see “Configuring the
Overwrite option” (page 125).
132
Calendar
Calendar
Attention: Some menu items may be locked or unavailable to users.
Please contact your system administrator for more details.
View the calendar in weekly or monthly format. You can also configure
reminders, appointments, and meeting alerts.
The Calendar allows you to store a maximum of 80 (without the MEM
card) and a maximum of 100 (with installed MEM card) appointments.
Attention: The maximum number of entries you can store varies
depending on the amount of storage space used by other
features.
This section describes the following tasks:
•
“Accessing the Calendar” (page 134)
•
“Changing the calendar format” (page 134)
•
“Selecting a date” (page 135)
•
“Adding an appointment” (page 136)
•
“Viewing an appointment” (page 137)
•
“Editing an appointment” (page 138)
•
“Copying an appointment” (page 140)
133
Calendar
•
“Deleting an appointment” (page 141)
CAUTION
You must charge your handset before you configure the
handset time and date. Each time you remove the
battery pack or switch the handset off it loses the time
and date information; you must manually reset it after
you reinstall the battery pack or switch the handset off
and on.
If your system provides the date and time information to
DECT handsets, the date and time settings update
automatically when you switch on the handset. Contact
your system administrator to determine if you can use
this feature.
Accessing the Calendar
To access the Calendar, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Calendar icon.
Select
3. Press the Select soft key.
Changing the calendar format
To change the calendar format, perform the following steps:
1.
134
Open the Calendar menu using the steps in
“Accessing the Calendar” (page 134).
Calendar
More
2. Press the More soft key
3. Press the Up or Down key to highlight the View
week or View month option.
View week
View month
Select
4. Press the Select soft key.
5. Press the Clr key one or more times to return to the
idle display.
Selecting a date
To select a date in the calendar, perform the following steps:
1. Open the Calendar menu using the steps in
“Accessing the Calendar” (page 134).
More
Go to date
Select
2. Press the More soft key to highlight the Go to date
option
3. Press the Select soft key.
4. Use the Dialpad to enter the required date
Select
More
Go to today
Select
5. Press the Select soft key.
6. To return to the current date, press the More soft
key, and highlight the Go to today option
7. Press the Select soft key.
8. Press the Clr key one or more times to return to the
idle display.
135
Calendar
Adding an appointment
To add an appointment to the calendar, perform the following steps:
1. Open the Calendar menu using the steps in
“Accessing the Calendar” (page 134).
More
Go to date
Select
2. Press the More soft key to highlight the Go to date
option
3. Press the Select soft key.
4. Use the Dialpad to enter the required date
5. Press the Select soft key.
Select
Select
6. Press the Select soft key.
7.
Use the Up or Down key to highlight the New
appointment option.
New appointment
Add
8. Press the Add soft key.
9. Use the Dialpad to enter the start date.
Continue
10. Press the Continue soft key.
11. Use the Dialpad to enter the start time.
Continue
12. Press the Continue soft key.
13. Press the Up or Down key to highlight the required
duration.
Select
136
14. Press the Select soft key.
Calendar
15. Use the Dialpad to enter the subject of the
appointment.
Continue
16. Press the Continue soft key.
17. Use the Dialpad to enter the location of the
appointment.
Continue
18. Press the Continue soft key.
19. Press the Up or Down key to highlight the required
reminder.
Select
20. Press the Select soft key.
21. Press the Clr key one or more times to return to the
idle display.
Viewing an appointment
To view an appointment in the calendar, perform the following steps:
1. Open the Calendar menu using the steps in
“Accessing the Calendar” (page 134).
More
Go to date
Select
2. Press the More soft key, to highlight the Go to date
option.
3. Press the Select soft key.
4. Use the Dialpad to enter the date of the
appointment.
Select
5. Press the Select soft key.
137
Calendar
Select
6. Press the Select soft key.
7. Press the Up or Down key to highlight the
appointment to view.
View
8. Press the View soft key.
9. Press the Clr key one or more times to return to the
idle display.
Editing an appointment
To edit an appointment in the calendar, perform the following steps:
1. Open the Calendar menu using the steps in
“Accessing the Calendar” (page 134).
More
Go to date
Select
2. Press the More soft key, to highlight the Go to date
option.
3. Press the Select soft key.
4. Use the Dialpad to enter the date of the
appointment.
Select
Select
5. Press the Select soft key.
6. Press the Select soft key and then press the Up or
Down key to highlight the appointment to edit.
7. Press the More soft key.
More
138
Calendar
8. Press the Up or Down key to highlight the Edit
option.
Edit
Select
9. Press the Select soft key.
10. Use the Dialpad to edit the start date.
Continue
11. Press the Continue soft key.
12. Use the Dialpad to edit the start time.
Continue
13. Press the Continue soft key.
14. Press the Up or Down key to highlight the required
duration.
Select
15. Press the Select soft key.
16. Use the Dialpad to edit the subject of the
appointment.
Continue
17. Press the Continue soft key.
18. Press the Up or Down key to highlight the required
reminder.
19. Press the Select soft key.
Select
20. Press the Clr key one or more times to return to the
idle display.
139
Calendar
Copying an appointment
To copy an appointment, perform the following steps:
1. Open the Calendar menu, using the steps in
“Accessing the Calendar” (page 134).
More
Go to date
Select
2. Press the More soft key to highlight the Go to date
option
3. Press the Select soft key.
4. Use the Dialpad to enter the date of the
appointment.
Select
Select
More
5. Press the Select soft key.
6. Press the Select soft key and then press the Up or
Down key to highlight the appointment to copy.
7. Press the More soft key.
8. Press the Up or Down key to highlight the Copy
option.
Copy
Select
Continue
Continue
140
9. Press the Select soft key
10. Optionally, use the Dialpad to enter the start date
of the new appointment, press the Continue soft
key.
11. Optionally, use the Dialpad to enter the start time
of the new appointment, and press the Continue
soft key.
Calendar
12. Press the Up or Down key to highlight the required
duration.
13. Press the Select soft key.
Select
14. Optionally, use the Dialpad to enter the subject of
the appointment, and press the Continue soft key.
Continue
15. Optionally, use the Dialpad to enter the location of
the appointment, and press the Continue soft key.
Continue
16. Press the Up or Down key to highlight the required
reminder.
17. Press the Select soft key.
Select
18. Press the Clr key one or more times to return to the
idle display.
Deleting an appointment
To delete an appointment from the calendar, perform the following steps:
1. Open the Calendar menu using the steps in
“Accessing the Calendar” (page 134).
More
Go to date
Select
2. Press the More soft key to highlight the Go to date
option.
3. Press the Select soft key.
4. Use the Dialpad to enter the date of the
appointment.
Select
5. Press the Select soft key.
141
Calendar
6. Press the Select soft key and then press the Up or
Down key to highlight the appointment to delete.
Select
More
7. Press the More soft key.
8. Press the Up or Down key to highlight the Delete
option.
9. Press the Select soft key.
Delete
Select
Yes
10. Press the Yes soft key to confirm the deletion.
11. Press the Clr key one or more times to return to the
idle display.
142
Calculator, Stopwatch, and Alarms
Calculator, Stopwatch, and
Alarms
Attention: Some menu items may be locked or unavailable to users.
Please contact your system administrator for more details.
This section explains the following features available on your Avaya 4027,
4070, or 4075 DECT Handset:
•
“Using the Calculator” (page 143)
•
“Using the Stopwatch” (page 145)
•
“Alarms” (page 147)
Using the Calculator
Use the calculator to perform basic mathematical calculations.
To use the calculator, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Accessories icon.
Select
3. Press the Select soft key.
143
Calculator, Stopwatch, and Alarms
4. Press the Up or Down key to highlight the
Calculator option.
Calculator
Select
5. Press the Select soft key.
6. Use the Dialpad to enter a value.
7. Press the Left or Right key to choose the required
operation icon.
Select
8. Press the Select soft key.
Attention: Alternatively, you can press the # key to
choose the required operation, and then press the
OK key.
To enter a decimal point (.), press the * key.
9. Use the Dialpad to enter a second value of up to 9
digits.
10. Press the Left or Right key to choose the equal
sign icon.
Select
11. Press the Select soft key.
The result appears.
12. Optionally, perform either of the following:
To perform calculations using the result, repeat
steps 7 to 11.
OR
To perform a new calculation, repeat steps 3 to 11.
144
Calculator, Stopwatch, and Alarms
13. Press the Clr key one or more times to return to the
idle display.
Attention: Invalid calculations result in an error
message.
The following table shows the calculator icons available for your use.
Table 14: Calculator icons
Symbol
Description
Addition sign
Division sign
Dot sign
Equal sign
Multiplication sign
Percentage sign
Subtraction sign
Using the Stopwatch
Use the stopwatch to measure elapsed time.
To start the stopwatch, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
145
Calculator, Stopwatch, and Alarms
2. Press the Up or Down key to highlight the
Accessories icon.
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the
Stopwatch option.
Stopwatch
Select
Start
5. Press the Select soft key.
6. Press the Start soft key to start timing.
The Stop or Continue soft key appears in place of
the Start soft key.
Lap
7. Press the Lap soft key to save the current elapsed
time, and start timing again.
Attention: You can store two lap values in your
handset. If you press the Lap soft key after two Lap
values are already stored, the handset overwrites
the oldest stored value.
Stop
Continue
Reset
8. Press the Stop soft key to stop measuring.
9. Choose one of the following:
Press the Continue soft key to continue measuring
OR
Press the Reset soft key to reset the stopwatch.
10. Press the Clr key one or more times to return to the
idle display.
146
Calculator, Stopwatch, and Alarms
Alarms
Use the Alarm feature to configure alarms.
This section describes the following tasks:
•
“Nonrecurrent alarms” (page 147)
•
“Recurrent alarms” (page 150)
CAUTION
You must charge your handset before you configure the
handset time and date. Each time you remove the
battery pack or switch the handset off it loses the time
and date information; you must manually reset it after
you reinstall the battery pack or switch the handset off
and on.
If your system provides the date and time information to
DECT handsets, the date and time settings update
automatically when you switch on the handset. Contact
your system administrator to determine if you can use
this feature.
CAUTION
If you configure your handset to use Silent charging, any
Alarms you configure cannot provide an audible alert
while the handset is on the charger.
Nonrecurrent alarms
Use the procedures in this section to manage nonrecurrent alarms:
•
“Creating an alarm” (page 148)
•
“Editing an alarm” (page 149)
•
“Turning off an alarm” (page 150)
147
Calculator, Stopwatch, and Alarms
Creating an alarm
To create a nonrecurrent alarm, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Accessories icon.
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Alarms
option.
Alarms
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the Alarm
option.
Alarm
7. Press the Select soft key.
Select
8. Use the Dialpad to enter the alarm time.
Save
9. Press the Save soft key.
10. Press the Clr key one or more times to return to the
idle display.
148
Calculator, Stopwatch, and Alarms
Editing an alarm
To edit a nonrecurrent, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Accessories icon.
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Alarms
option.
Alarms
5. Press the Select soft key.
Select
6. Press the Up or Down key to highlight the Alarm
option.
Alarm
Select
7. Press the Select soft key.
8. Use the Dialpad to edit the alarm time.
Save
9. Press the Save soft key.
10. Press the Clr key one or more times to return to the
idle display.
149
Calculator, Stopwatch, and Alarms
Turning off an alarm
To turn off a nonrecurrent, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Accessories icon.
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Alarms
option.
Alarms
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the Alarm
option.
Alarm
7. Press the Select soft key.
Select
Turn off
8. Press the Turn off soft key.
9. Press the Clr key one or more times to return to the
idle display.
Recurrent alarms
Use the procedures in this section to manage weekly recurrent alarms:
•
“Creating a recurrent alarm” (page 151)
•
“Editing a recurrent alarm” (page 152)
•
“Turning off a recurrent alarm” (page 153)
150
Calculator, Stopwatch, and Alarms
Creating a recurrent alarm
To create a recurrent alarm, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Accessories icon.
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Alarms
option.
Alarms
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the
Recurrent alarm option.
Recurrent alarm
Select
7. Press the Select soft key.
8. Use the Dialpad to enter the alarm time.
Continue
9. Press the Continue soft key.
10. Press the Up or Down key to highlight the required
days of the week.
11. Press the Mark soft key.
Mark
OK
12. Press the OK soft key to confirm the settings.
151
Calculator, Stopwatch, and Alarms
13. Press the Clr key one or more times to return to the
idle display.
Editing a recurrent alarm
To edit a recurrent alarm, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Accessories icon.
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Alarms
option.
Alarms
5. Press the Select soft key.
Select
6. Press the Up or Down key to highlight the
Recurrent alarm option.
Recurrent alarm
Select
7. Press the Select soft key.
8. Use the Dialpad to edit the alarm time.
Continue
152
9. Press the Continue soft key.
Calculator, Stopwatch, and Alarms
10. Press the Up or Down key to highlight the required
days of the week.
Mark
Unmark
OK
11. Press the Mark soft key.
12. Press the Unmark soft key to unmark a marked
day of the week (if necessary).
13. Press the OK soft key to confirm the settings.
14. Press the Clr key one or more times to return to the
idle display.
Turning off a recurrent alarm
To turn off a recurrent alarm, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Accessories icon.
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Alarms
option.
Alarms
5. Press the Select soft key.
Select
153
Calculator, Stopwatch, and Alarms
6. Press the Up or Down key to highlight the
Recurrent alarm option.
Recurrent alarm
7. Press the Select soft key.
Select
Turn off
8. Press the Turn off soft key.
9. Press the Clr key one or more times to return to the
idle display.
Attention: If the alarm or the recurrent alarm is off when you open the
time editor, the current time appears.
154
Telephone settings
Telephone settings
Attention: Some menu items may be locked or unavailable to users.
Please contact your system administrator for more details.
Use the information in this chapter to configure the following:
•
“General settings” (page 155)
•
“Audio settings” (page 173)
•
“Display settings” (page 189)
•
“Call settings” (page 196)
•
“Connectivity settings” (page 217)
General settings
The following table describes the telephone setting icons on the display.
Table 15: Telephone setting icons
Icon
Description
General settings
Sound settings
Display settings
Calls settings
Connectivity settings
This section describes the following tasks:
155
Telephone settings
•
“Accessing the General settings menu” (page 156)
•
“Profile configuration” (page 156)
•
“Configuring the time and date” (page 160)
•
“Choosing a language” (page 162)
•
“Configuring shortcuts” (page 163)
•
“Configuring the LED Indicator (4075 only)” (page 164)
•
“Security options” (page 165)
•
“Entering Proxy Password” (page 169)
•
“Resetting the handset” (page 171)
•
“Resetting the MEM card” (page 172)
•
“Viewing information” (page 173)
Accessing the General settings menu
To access the General settings menu, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the Settings
icon.
Select
3. Press the Select soft key.
4. Press the Left or Right key to choose the General
menu.
Profile configuration
Use the profile option to personalise your handset.
156
Telephone settings
To configure your profile, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Profiles
option.
Profiles
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight any of the
following options:
— Select profile to select a profile and press the
Select soft key.
Select profile
— Edit profile to edit a profile and press the
Select soft key.
Edit profile
Reset profile
— Reset profile to return to the default values of
the settings and press the Select soft key.
Select
5. Press the Clr key one or more times to return to the
idle display.
You can use the following profiles:
•
Normal (default)
•
Meeting
•
Outdoors
•
Office
•
Home
•
Silent (disables, or decreases the volume of, all alert signals)
•
Loudspeaker
157
Telephone settings
Long press the # key in Idle mode to switch between the active profile and
the Silent profile. If the active profile is Silent, long press the # key in Idle
mode to switch to the Normal profile.
You can configure the following features for each profile:
•
Ring volume
•
Ring melody for external calls
•
Ring melody for internal calls
•
Ring melody for unknown calls
•
Normal message alert
•
Urgent message alert
•
Ring melody for emergency calls
•
Increasing ring feature
•
Alert volume
•
Alert tone
•
Increasing alert
•
Vibrator
•
Key sound
•
Confirmation sound
•
Coverage warning
•
Charger warning
For more information about audio settings, see “Audio settings”
(page 173).
Editing a profile
To edit a selected profile, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
158
Telephone settings
2. Press the Up or Down key to highlight the Profiles
option.
Profiles
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Edit
profile option.
Edit profile
Select
5. Press the Select soft key.
6. Press the Up or Down key to highlight the required
option.
Select
Select
OR
OK
7. Press the Select soft key.
8. Make the required changes and perform one of the
following:
Press the Select soft key.
OR
Press the OK soft key.
9. Press the Clr key one or more times to return to the
idle display.
159
Telephone settings
Configuring the time and date
Use the time and date option to configure the time and date.
WARNING
You must charge your handset before you configure the
handset time and date. Each time you remove the
battery pack or switch the handset off it loses the time
and date information; you must manually reset it after
you reinstall the battery pack or switch the handset off
and on.
If your system can provide the date and time information
to DECT handsets, the date and time settings update
automatically when you switch on the handset. Contact
your system administrator to determine if you can use
this feature.
Configuring the time
To configure the time, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Time &
Date option.
Time & Date
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Time
option.
Time
5. Press the Select soft key.
Select
6. Use the Dialpad to edit the time.
160
Telephone settings
More
7. Press the More soft key to edit the time format.
8. Press the Up or Down key to highlight the required
time format.
9. Press the Select soft key.
Select
Attention: Depending on the Time and Date format
you choose, the font size in the Calls list changes
(see “Calls list with normal text size” (page 68)).
If you choose am/pm time format in combination
with dd/mm/yyyy (mm/dd/yyyy) or dd-mmm-yyyy
date format, the entries in the Calls list contain
information about date only.
Save
10. Press the Save soft key to save the changes.
11. Press the Clr key one or more times to return to the
idle display.
Configuring the date
To configure the date, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Time &
Date option.
Time & Date
Select
3. Press the Select soft key.
161
Telephone settings
4. Press the Up or Down key to highlight the Date
option.
Date
5. Press the Select soft key.
Select
6. Use the Dialpad to edit the date.
More
7. Press the More soft key to edit the date format.
8. Press the Up or Down key to highlight the required
date format.
9. Press the Select soft key.
Select
Attention: Depending on the Time and Date format
you choose, the font size in the Calls list changes
(see “Calls list with normal text size” (page 68)).
If you choose am/pm time format in combination
with dd/mm/yyyy (mm/dd/yyyy) or dd-mmm-yyyy
date format, the entries in the Calls list contain
information about date only.
Save
10. Press the Save soft key to save the changes.
11. Press the Clr key one or more times to return to the
idle display.
Choosing a language
You can configure your handset to operate in any of the following
languages:
•
English
•
Spanish
•
German
162
Telephone settings
•
French
•
Italian
•
Dutch
•
Portuguese
•
Danish
•
Swedish
•
Turkish
•
Polish
•
Greek
•
Russian
•
Norwegian
To choose a language, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the
Language option.
Language
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the required
language.
5. Press the Select soft key.
Select
6. Press the Clr key one or more times to return to the
idle display.
Configuring shortcuts
Use the information in this section to assign shortcuts that allow you to
access handset menus or features by pressing a single button.
163
Telephone settings
To assign a shortcut, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the
Shortcuts option.
Shortcuts
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the key to
which you want to assign a shortcut.
5. Press the Select soft key.
Select
6. Press the Up or Down key to choose the option
you want to assign as a shortcut.
7. Press the Select soft key.
Select
8. Press the Clr key one or more times to return to the
idle display.
Configuring the LED Indicator (4075 only)
Use the information in this section to configure the LED indicator that
appears to the left of the speaker on the Avaya 4075 DECT Handset. For
more information, see “LED indicator (4075 only)” (page 33).
Use the following steps to configure the LED indicator:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
164
Telephone settings
2. Press the Up or Down key to highlight the LED
signal option.
LED signal
Select
3. Press the Select soft key.
4. Press the Up or Down key to select the LED colour
to configure:
Select
•
Red LED
•
Green LED
•
Orange LED
5. Press the Select soft key.
6. Press the Up or Down key to highlight the option to
associate with the selected LED colour:
Select
•
Missed calls
•
Text messages
•
Voice messages
•
Text and voice messages
•
Mandown
•
Low Battery
•
Off
7. Press the Select soft key to apply the setting.
8. Press the Clr key one or more times to return to the
idle display.
Security options
You can use the following options to secure your handset: phone lock,
automatic key lock, and PIN code.
This section describes the following tasks:
165
Telephone settings
•
“Using the Phone lock feature” (page 166)
•
“Automatic dialpad lock” (page 167)
•
“Unlocking the dialpad” (page 168)
•
“Changing the PIN code” (page 168)
•
“Entering Proxy Password” (page 169)
Using the Phone lock feature
Enable the Phone lock feature to avoid unauthorised use of your handset.
To enable or disable the phone lock, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Security
option.
Security
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Phone
lock option.
Phone lock
Select
5. Press the Select soft key.
6. Use the Dialpad to enter your PIN code.
OK
7. Press the OK soft key.
8. Press the Up or Down key to choose the required
option.
9. Press the Select soft key.
Select
166
Telephone settings
10. Press the Clr key one or more times to return to the
idle display.
Automatic dialpad lock
The Automatic dialpad lock feature disables key input if you do not press
any keys for a configurable period of time. To configure the number of
seconds the system waits before enabling dialpad lock, change the
“second value” timer in the Power save menu; if you configure this value
to 0, the system waits 30 seconds before activating dialpad lock. For
more information about configuring Power save, see “Configuring Power
save” (page 195).
To enable Automatic dialpad lock, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Security
option.
Security
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the
Automatic keylock option.
Automatic keylock
Select
5. Press the Select soft key.
The left soft key label becomes a lock icon.
6. Press the Up or Down key to disable the
Automatic key lock (Off option) or to set up timer
before the dial pad is automatically locked.
Automatic keylock
7. Press the Select soft key.
Select
167
Telephone settings
8. Press the Clr key one or more times to return to the
idle display.
Unlocking the dialpad
To unlock the dialpad, perform the following steps:
1. Press the OK key.
Unlock
2. Press the Unlock soft key.
Note: The Unlock soft key is available for three
seconds after you press the OK key.
Attention: When you receive a call with key lock active, the dialpad
lock temporarily suspends and you can use all keys. The
key lock reactivates when you terminate the call.
Changing the PIN code
Use the information in this section to change the PIN code on the
handset.
To change the PIN code, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Security
option.
Security
Select
168
3. Press the Select soft key.
Telephone settings
4. Press the Up or Down key to highlight the Change
PIN code option.
Change PIN
5. Press the Select soft key.
Select
6. Use the Dialpad to enter the current PIN code.
OK
7. Press the OK soft key.
8. Use the Dialpad to enter a new PIN code.
OK
9. Press the OK soft key.
10. Use the Dialpad to verify the new PIN code.
OK
11. Press the OK soft key.
12. Press the Clr key one or more times to return to the
idle display.
Entering Proxy Password
Proxy password feature is used only in case SIP DECT system
authentication is based on the password configured in the handset.
To configure Proxy password, learn it from your Commination system
administrator and perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
169
Telephone settings
2. Press the Up or Down key to highlight the Security
option.
Security
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the Proxy
password option.
Reset settings
5. Press the Select soft key.
Select
6. If a Proxy password is configured, use the Dialpad
to enter the current Proxy password and press the
OK soft key.
OK
7. Use the Dialpad to enter a new Proxy password.
OK
8. Press the OK soft key.
9. Use the Dialpad to verify the new Proxy password.
OK
10. Press the OK soft key.
11. Press the Clr key one or more times to return to the
idle display.
Defining the handset name
You can define a handset name (maximum of 16 characters) to appear on
the idle display.
170
Telephone settings
To define the handset name, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Handset
name option.
Handset name
3. Press the Select soft key.
Select
4. Use the Dialpad to enter or edit the handset name.
Attention: Depending on system configuration
handset name can be used for authentication on
SIP DECT. In this case changing the handset name
will cause authentication failure, so that no calls
can be made or received.
Save
5. Press the Save soft key.
6. Press the Clr key one or more times to return to the
idle display.
Resetting the handset
Reset the handset to restore all options to the factory default state. Your
contacts, the handset PIN, and system subscriptions are not impacted by
reset.
To reset the handset, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
171
Telephone settings
2. Press the Up or Down key to highlight the Reset
settings option.
Reset settings
3. Press the Select soft key.
Select
Yes
4. Press the Yes soft key.
5. Use the Dialpad to enter the current PIN code.
OK
6. Press the OK soft key.
7. Press the Clr key one or more times to return to the
idle display.
Resetting the MEM card
Use the information in this section to erase all data from the memory
(MEM) card.
To reset the MEM card, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Reset
memory card option.
Reset memory card
Select
Yes
3. Press the Select soft key.
4. Press the Yes soft key.
5. Use the Dialpad to enter the current PIN code.
OK
172
6. Press the OK soft key.
Telephone settings
7. Press the Clr key one or more times to return to the
idle display.
8. Switch off the handset.
9. Switch on the handset.
Viewing information
Use the status option to view information about the software release
installed on the handset, hardware version of the handset, battery charge
status, level of radio signal, and available memory.
To view status information, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156).
2. Press the Up or Down key to highlight the Status
option.
Status
Select
3. Press the Select soft key.
4. Press the Up or Down key to scroll through
available status information.
OK
5. Press the OK soft key to exit the menu.
6. Press the Clr key one or more times to return to the
idle display.
Audio settings
You can customize your handset audio. Use the Audio settings menu to
configure the following:
•
“Accessing the Sounds and alerts menu” (page 174)
173
Telephone settings
•
“Configuring the ring volume” (page 175)
•
“Defining the ring external melody” (page 175)
•
“Defining the ring internal melody” (page 176)
•
“Defining the Ring unknown call melody” (page 177)
•
“Defining the Normal message melody” (page 177)
•
“Defining the Urgent message melody” (page 178)
•
“Defining the Ring emergency melody” (page 179)
•
“Enabling the Increasing ring feature” (page 179)
•
“Configuring Alert volume” (page 180)
•
“Defining the Alert tone melody” (page 181)
•
“Enabling Increasing alert” (page 181)
•
“Enabling the Vibrator” (page 182)
•
“Enabling the Key sound” (page 183)
•
“Enabling Confirmation sound” (page 184)
•
“Enabling the Coverage warning” (page 185)
•
“Enabling the Charger warning” (page 186)
•
“Configuring Missed call time” (page 186)
•
“Configuring Cadence Mode” (page 187)
Accessing the Sounds and alerts menu
To access the Sounds and alerts menu, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the Settings
icon.
3. Press the Select soft key.
Select
174
Telephone settings
4. Press the Left or Right key to choose the Sounds
and alerts menu.
Configuring the ring volume
To change the ringer volume, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the Ring
volume option.
Ring volume
3. Press the Select soft key.
Select
4. Press the Left or Right key to select the volume
level.
OK
5. Press the OK soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Defining the ring external melody
The Avaya 4070 and 4075 DECT Handsets offer 20 melodies, while the
Avaya 4027 DECT Handset offers 10 melodies.
WARNING
If your handset is subscribed to a traditional DECT
system based on DMC cards, the system identifies all
incoming calls as external.
175
Telephone settings
To define a melody for external calls, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the Ring
external option.
Ring external
3. Press the Select soft key.
Select
4. Press the Up or Down key to select a melody.
Play
Select
5. Press the Play soft key to listen to the melody or
the Select soft key to apply it.
6. Press the Clr key one or more times to return to the
idle display.
Defining the ring internal melody
WARNING
This feature is available only for handsets subscribed to
SIP DECT system.
To define a melody for internal rings, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
176
Telephone settings
2. Press the Up or Down key to highlight the Ring
internal option.
Ring internal
Select
3. Press the Select soft key.
4. Press the Up or Down key to select a melody.
Play
Select
5. Press the Play soft key to listen to the melody or
the Select soft key to apply it.
6. Press the Clr key one or more times to return to the
idle display.
Defining the Ring unknown call melody
Attention: Avaya DECT systems do not support the Ring unknown call
melody feature.
Defining the Normal message melody
Attention: The Normal message alert melody feature is available on
the Avaya 4070 and 4075 DECT Handsets only.
To define a melody for normal message alerts, perform the following
steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
177
Telephone settings
2. Press the Up or Down key to highlight the Ring
normal msg. option.
Ring normal msg.
3. Press the Select soft key.
Select
4. Press the Up or Down key to select a melody.
Play
Select
5. Press the Play soft key to listen to the melody or
the Select soft key to apply it.
6. Press the Clr key one or more times to return to the
idle display.
For more information about normal and urgent messages, see
“Configuring Message display setting” (page 127).
Defining the Urgent message melody
Attention: The Urgent message alert melody feature is available on
the Avaya 4070 and 4075 DECT Handsets only.
To define a melody for urgent message alerts, perform the following
steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the Ring
urgent msg. option.
Ring urgent msg.
Select
178
3. Press the Select soft key.
Telephone settings
4. Press the Up or Down key to select a melody.
Play
Select
5. Press the Play soft key to listen to the melody or
the Select soft key to apply it.
6. Press the Clr key one or more times to return to the
idle display.
For more information about normal and urgent messages, see
“Configuring Message display setting” (page 127).
Defining the Ring emergency melody
Attention: Avaya DECT systems do not support the Ring emergency
call melody feature.
Enabling the Increasing ring feature
If you enable the Increasing ring feature, the volume level gradually
increases during an alert.
To enable the Increasing ring feature, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the
Increasing ring option.
Increasing ring
Select
3. Press the Select soft key.
179
Telephone settings
4. Press the Up or Down key to select On or Off.
On
Off
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Configuring Alert volume
Use this function to change the alert volume.
To change the alert volume, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the Alert
volume option.
Alert volume
3. Press the Select soft key.
Select
4. Press the Left or Right key to select the volume
level.
OK
5. Press the OK soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
180
Telephone settings
Defining the Alert tone melody
To define a melody for alerts, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the Alert
tone option.
Alert tone
3. Press the Select soft key.
Select
4. Press the Up or Down key to select a melody.
Play
Select
5. Press the Play soft key to listen to the melody or
the Select soft key to apply it.
6. Press the Clr key one or more times to return to the
idle display.
Enabling Increasing alert
If you enable the Increasing alert feature, the volume level gradually
increases during an alert.
To enable the Increasing alert feature, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
181
Telephone settings
2. Press the Up or Down key to highlight the
Increasing alert option.
Increasing alert
Select
3. Press the Select soft key.
4. Press the Up or Down key to select On or Off.
On
Off
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Enabling the Vibrator
Attention: The Vibrator feature is available on the Avaya 4070 and
4075 DECT Handsets only.
If you enable the Vibrator feature, the handset vibrates to alert you about
incoming calls. You can configure the handset to vibrate, ring, or both.
To enable the Vibrator feature, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
182
Telephone settings
2. Press the Up or Down key to highlight the Vibrator
option.
Vibrator
Select
3. Press the Select soft key.
4. Press the Up or Down key to select
— Off
— Vibrate then ring
Off
Vibrate then ring
— Vibrate only
— Vibrate and ring
Vibrate only
Vibrate and ring
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Enabling the Key sound
If you enable the Key sound feature, a sound occurs when you press a
key.
To enable the Key sound feature, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the Key
sound option.
Key sound
Select
3. Press the Select soft key.
183
Telephone settings
4. Press the Up or Down key to select Silent
(disabled), Click, or Tone (different types of
sounds).
Silent
Click
Tone
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Enabling Confirmation sound
You can configure your handset to play a Confirmation sound when you
successfully perform an action.
To enable Confirmation sound, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the
Confirmation sound option.
Confirmation sound
Select
3. Press the Select soft key.
4. Press the Up or Down key to select On or Off.
On
Off
184
Telephone settings
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Attention: The default volume of the Confirmation
sound is 1.
Enabling the Coverage warning
If you enable the Coverage warning feature, a sound occurs when the
handset is out of base station coverage.
To enable the Coverage warning feature, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight the
Coverage warning option.
Coverage warning
3. Press the Select soft key.
Select
4. Press the Up or Down key to select On or Off.
On
Off
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
185
Telephone settings
Enabling the Charger warning
If you enable the Charger warning feature, a sound occurs when the
handset is placed in the charger.
To enable the Charger warning feature, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight Charger
warning.
Charger warning
3. Press the Select soft key.
Select
4. Press the Up or Down key to select On or Off.
On
Off
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Configuring Missed call time
Set the Missed call time in range of 1 to 99 seconds if you don't want the
call unanswered for the configured period to be defined as missed (no
dialog ‘Missed calls’ appears, the call is not added to the missed call list).
To disable the feature set the Missed call time parameter to 0.
186
Telephone settings
To configure Missed call time on your handset, perform the following
steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight Missed call
time.
3. Press the Select soft key.
Select
4. Use the Dialpad to enter the value in range of 0 to
99.
5. Press the Save soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Configuring Cadence Mode
A cadence defines the duration of the on and off phases of a ringing
cycle. You can use the Tones and Cadences feature on the Avaya
Communication Server 1000 (Avaya CS 1000) system to configure ring
cadences to identify different types of incoming calls. For more
information about Tones and Cadences on Avaya CS 1000, see Avaya
Features and Services Fundamentals (NN43001-106).
Attention: Cadence Mode is applicable to traditional DECT systems
only (based on DMC cards). If you enable or disable
Cadence Mode for a SIP DECT solution, there is no impact.
To cause your DECT handset to use the ring cadences configured on
your CS 1000 system, you must activate Cadence Mode on your DECT
handset. This allows the PBX system to control the on and off phases of
187
Telephone settings
the ringing cycles on the handset. If Cadence Mode is disabled on your
handset, the handset continuously plays its ringing melody on any
incoming call, irrespective of the Tones and Cadences configuration on
your CS 1000 system.
To activate Cadence Mode on your handset, perform the following steps:
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174).
2. Press the Up or Down key to highlight Cadence
Mode.
Cadence Mode
3. Press the Select soft key.
Select
4. Press the Up or Down key to select On or Off.
On
Off
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
After you activate Cadence Mode, you can optionally select a handset
ring melody that has a desirable interaction with the cadences
programmed on the CS 1000 system. For more information about
selecting a ring melody, see “Defining the ring external melody”
(page 175).
188
Telephone settings
Display settings
Use the information in this section to customise the handset display as
follows:
•
“Accessing the Display settings menu” (page 189)
•
“Wallpaper customisation” (page 189)
•
“Selecting a theme” (page 192)
•
“Startup customisation” (page 192)
•
“Configuring Power save” (page 195)
Accessing the Display settings menu
To access the Display settings menu, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the Settings
icon.
Select
3. Press the Select soft key.
4. Press the Left or Right key to choose the Display
menu.
Wallpaper customisation
Use the information in this section to customise the image that appears as
a background when your handset is in idle mode.
189
Telephone settings
Selecting wallpaper by theme
To select wallpaper according to the selected theme, perform the
following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the
Wallpaper option.
Wallpaper
3. Press the Select soft key.
Select
4. Press the Up or Down key to select the Theme
option.
Theme
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Selecting wallpaper other than from the current theme
To select wallpaper from a source other than the current theme, perform
the following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the
Wallpaper option.
Wallpaper
3. Press the Select soft key.
Select
190
Telephone settings
4. Press the Up or Down key to select the Picture
option.
Picture
5. Press the Up or Down key to select an image from
the list.
Show
Select
6. Perform one of the following:
Press the Show soft key to view the selected
image.
OR
Press the Select soft key to use the selected image
as your wallpaper.
7. Press the Clr key one or more times to return to the
idle display.
Clearing wallpaper
If you do not want wallpaper to appear on your handset, perform the
following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the
Wallpaper option.
Wallpaper
Select
3. Press the Select soft key.
4. Press the Up or Down key to select None.
None
191
Telephone settings
5. Press the Clr key one or more times to return to the
idle display.
Selecting a theme
A theme is a combination of images and colour gradations for the
wallpaper, startup display, and menu of your handset.
To select a theme, perform the following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the Themes
option.
Themes
Select
3. Press the Select soft key.
4. Press the Up or Down key to select a theme from
the list.
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Startup customisation
Use the information in this section to customise the image that appears
on the handset display during startup.
192
Telephone settings
Selecting a startup image by theme
To select a startup image according to the selected theme, perform the
following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the Startup
screen option.
Startup screen
Select
3. Press the Select soft key.
4. Press the Up or Down key to select the Theme
option.
Theme
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Selecting a startup image other than from the current theme
To select a startup image from a source other than the selected theme,
perform the following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the Startup
screen option.
Startup screen
3. Press the Select soft key.
Select
193
Telephone settings
4. Press the Up or Down key to select the Picture
option.
Picture
5. Press the Up or Down key to select a picture from
the list.
Show
Select
6. Perform one of the following:
Press the Show soft key to view the selected
image.
OR
Press the Select soft key to use the selected image
as your startup image.
7. Press the Clr key one or more times to return to the
idle display.
Clearing the startup image
If you do not want to use a startup image, perform the following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the Startup
screen option.
Startup screen
3. Press the Select soft key.
Select
4. Press the Up or Down key to select the None
option.
None
194
Telephone settings
5. Press the Clr key one or more times to return to the
idle display.
Configuring Power save
To configure how long the handset remains idle before entering an
energy-saving state, perform the following steps:
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 189).
2. Press the Up or Down key to highlight the Power
save option.
Power save
Select
3. Press the Select soft key.
4. Use the Dialpad to enter the time period:
— the first value (from 1 to 59 seconds) defines
the time before the display becomes dim.
— the second value (from 1 to 59 seconds)
defines the time before the display switches off
(after the display becomes dim). If you
configure the second value as 0, the display
never switches off and the handset battery
discharges faster.
Attention: To conserve the battery charge of your
handset, the display automatically dims during
calls. Press the OK key to restore the display.
To configure the number of seconds that elapse
before the display dims, change the “first value”
timer in Power save settings. For more information,
see “Configuring Power save” (page 195).
Save
5. Press the Save soft key.
195
Telephone settings
6. Press the Clr key one or more times to return to the
idle display.
Call settings
You can change the call settings for your handset.
Use the handset Settings menu to perform the following:
•
“Accessing the call settings menu” (page 196)
•
“Accessing call and message statistics” (page 197)
•
“Answer mode configuration” (page 197)
•
“Caller filter configuration” (page 200)
•
“Emergency call configuration” (page 206)
•
“Mandown configuration (4075 only)” (page 209)
•
“Activating the Silent charging feature” (page 216)
Accessing the call settings menu
To access the call settings menu, perform the following steps:
Menu
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the Settings
icon.
Select
3. Press the Select soft key.
4. Press the Left or Right key to choose the Calls
menu.
196
Telephone settings
Accessing call and message statistics
You can view call and message statistics using the Units menu.
To access statistics information, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the Units
option.
Units
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the Call
time option or the Message count option.
Call time
Message count
Reset
Yes
Attention: The message count option is available
on the Avaya 4070 and 4075 DECT Handsets only.
The Call time and Message count options reflects
statistics for outgoing calls and messages.
5. Optionally, press the Reset soft key to clear stored
statistics.
6. Press the Yes soft key to confirm the changes.
7. Press the Clr key one or more times to return to the
idle display.
Answer mode configuration
You can configure your handset to handle incoming calls in any of the
following ways:
•
Any key answer mode—you can answer with any key
•
Autoanswer mode—the handset goes off-hook automatically
197
Telephone settings
•
Normal answer mode—answer using the OK or Call key
This section describes the following tasks:
•
“Activating Any key Answer mode” (page 198)
•
“Activating Auto answer mode” (page 198)
•
“Activating Normal answer mode” (page 199)
Activating Any key Answer mode
To activating Any key Answer mode, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the Answer
mode option.
Answer mode
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the Any key
option.
Any key
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Activating Auto answer mode
To activate Auto answer mode, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
198
Telephone settings
2. Press the Up or Down key to highlight the Answer
mode option.
Answer mode
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the Auto
answer option.
Auto. answer
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Activating Normal answer mode
To activate Normal answer mode, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the Answer
mode option.
Answer mode
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the Normal
option.
Normal
Select
5. Press the Select soft key.
199
Telephone settings
6. Press the Clr key one or more times to return to the
idle display.
Caller filter configuration
You can use the Caller filter to selectively block or accept calls from
specified phone numbers. You can filter up to 10 phone numbers using
the caller filter list.
When the caller filter function is active, a filter icon appears on the
display.
Attention: The Caller filter feature is available on the Avaya 4070 and
4075 DECT Handsets only.
The Caller filter functions only when the caller number
transmits through Integrated Services Digital Network
(ISDN).
This section contains information to help you manage Caller filter,
including steps to add and edit entries, and activate or deactivate Caller
filter.
•
“Accessing the Caller filter menu” (page 200)
•
“Adding an entry to the Caller filter list” (page 201)
•
“Editing entries in the Caller filter list” (page 202)
•
“Deleting an entry from the Caller filter list” (page 203)
•
“Deleting all entries in the Caller filter list” (page 204)
•
“Activating Caller filter” (page 205)
Accessing the Caller filter menu
To open the Caller filter menu, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
200
Telephone settings
2. Press the Up or Down key to highlight the Caller
filter option.
Caller filter
Select
3. Press the Select soft key.
Adding an entry to the Caller filter list
To add an entry to the Caller filter list, perform following steps:
Caller filter
1. Open the Caller filter menu using the steps in
“Accessing the Caller filter menu” (page 200).
2. Press the Up or Down key to highlight the List
option.
List
Select
Add
3. Press the Select soft key.
4. Press the Add soft key.
201
Telephone settings
Enter number
5. Press the Up or Down key to highlight the Enter
number option, press the Select soft key, use the
Dialpad to enter the telephone number and the
name, and press the Save soft key.
Select
Save
OR
OR
Press the Up or Down key to highlight the Lookup
contact option, press the Select soft key, use the
Up or Down key to highlight the required contact,
and press the Select soft key.
Lookup contact
Select
Attention: Numbers can consist of a maximum of
32 characters. Names can consist of a maximum of
16 characters.
You can use one asterisk at the end of a number to
filter all numbers that begin with a given sequence.
Select
6. Press the Clr key one or more times to return to the
idle display.
Editing entries in the Caller filter list
To edit entries in the Caller filter list, perform the following steps:
Caller filter
1. Open the Caller filter menu using the steps in
“Accessing the Caller filter menu” (page 200).
2. Press the Up or Down key to highlight the List
option.
List
Select
202
3. Press the Select soft key.
Telephone settings
4. Press the Up or Down key to highlight the required
entry.
More
5. Press the More soft key.
6. Press the Up or Down key to highlight the Edit
option.
Edit
7. Press the Select soft key.
Select
8. Use the Dialpad to edit the telephone number and
name.
Save
9. Press the Save soft key.
10. Press the Clr key one or more times to return to the
idle display.
Deleting an entry from the Caller filter list
To delete an entry from the Caller filter list, perform the following steps:
Caller filter
1. Open the Caller filter menu using the steps in
“Accessing the Caller filter menu” (page 200).
2. Press the Up or Down key to highlight the List
option.
List
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the required
entry to delete.
203
Telephone settings
5. Press the Up or Down key to highlight the Delete
option.
Delete
Select
Yes
6. Press the Select soft key.
7. Press the Yes soft key to confirm the changes.
8. Press the Clr key one or more times to return to the
idle display.
Deleting all entries in the Caller filter list
To delete all entries in the Caller filter list, perform the following steps:
Caller filter
1. Open the Caller filter menu using the steps in
“Accessing the Caller filter menu” (page 200).
2. Press the Up or Down key to highlight the List
option.
List
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight any entry.
5. Press the More soft key.
More
6. Press the Up or Down key to highlight the Delete
all option.
Delete all
Select
Yes
204
7. Press the Select soft key.
8. Press the Yes soft key to confirm the changes.
Telephone settings
9. Use the Dialpad to enter the PIN code.
OK
10. Press the OK soft key.
11. Press the Clr key one or more times to return to the
idle display.
Activating Caller filter
Attention: If you activate the Caller filter and configure the accept list,
the handset accepts calls only from the numbers in the
caller filter list. If you configure the block list, the handset
blocks all calls from the numbers in the caller filter list.
To activate an accept or block list, perform the following steps:
Caller filter
1. Open the Caller filter menu using the steps in
“Accessing the Caller filter menu” (page 200).
2. Press the Up or Down key to highlight the Mode
option.
Mode
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the required
mode.
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
205
Telephone settings
Deactivating Caller filter
To deactivate an accept or block list, perform the following steps:
Caller filter
1. Open the Caller filter menu using the steps in
“Accessing the Caller filter menu” (page 200).
2. Press the Up or Down key to highlight the Mode
option.
Mode
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Filter off
mode.
Filter off
Select
5. Press the Select soft key.
6. Press the Clr key one or more times to return to the
idle display.
Emergency call configuration
Use the Emergency call feature to dial a number or send a text message
rapidly. Use the Emergency call menu to store an emergency number and
a text message. When you press the emergency key, one of the following
actions occur:
•
If you define a message, the handset initiates a voice call using the
emergency number.
206
Telephone settings
•
If you define a message (up to 160 characters in length), the handset
sends the emergency message to the emergency number.
Attention: The Emergency call feature is available on the Avaya 4027,
4070, 4075 DECT Handsets, but the message can be sent
from the Avaya 4070 and 4075 DECT Handsets only.
You can send text messages only if your system supports
this feature. Contact your system administrator to determine
if you can use this feature.
After you send a message, the handset stores the message
in the text message list. For more information, see
“Messaging” (page 107).
Configuring an emergency call number
To configure an emergency call number, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the
Emergency call option
Emergency call
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the Number
option.
5. Press the Select soft key.
Select
207
Telephone settings
Lookup contact
Select
OR
6. Press the Up or Down key to highlight Lookup
contact, press the Select soft key, press the Up or
Down key to highlight the required number from
your contacts list, and press the Select soft key.
OR
Press the Up or Down key to highlight Enter
Number, press the Select soft key, use the
Dialpad to enter or edit the number, and press the
Save soft key.
Enter number
Select
Save
7. Press the Clr key one or more times to return to the
idle display.
Creating an emergency call text message
To create an emergency call text message, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the
Emergency call option.
Emergency call
3. Press the Select soft key.
Select
208
Telephone settings
4. Press the Up or Down key to highlight the
Message option.
Message
Select
5. Press the Select soft key.
6. Use the Dialpad to enter the text of the emergency
message.
Save
7. Press the Save soft key.
8. Configure the emergency call number to which to
send the message.
To configure an emergency call number, follow the
steps in “Configuring an emergency call number”
(page 207).
9. Press the Clr key one or more times to return to the
idle display.
Mandown configuration (4075 only)
When the Mandown feature is enabled, the handset constantly monitors
its vertical position using the built-in motion sensor. If the handset tilts
towards horizontal and remains in that position for a configured period of
time (the "mandown call delay"), the handset sets the Mandown
condition. If you do not cancel the Mandown condition within a configured
period of time (the "prealarm time"), the handset automatically sends a
mandown call or text message, as follows:
•
If you do not enter a message when configuring the Mandown
feature, the handset dials the Mandown call number.
209
Telephone settings
•
If you enter a Mandown text message (up to 160 characters in
length), the handset sends that message to the configured number.
Attention: You can configure Mandown to send text messages
only if your system supports this feature. Contact
your system administrator to determine if you can use
this feature. After you send a message, the handset
stores the message in the text message list. For
more information, see “Messaging” (page 107).
Note 1: If you want to cancel the Mandown condition, you must
deliberately clear it; the handset does not automatically cancel the
Mandown condition if you return the handset to its vertical position.
Note 2: You can configure the LED indicator to flash when the
Mandown condition is detected. If you manually clear the mandown
condition before the prealarm time elapses, the LED indicator turns
off; otherwise the LED indicator continues to flash until the handset
places the mandown call or message. See “Configuring the LED
Indicator (4075 only)” (page 164) for more details.
Note 3: The Mandown feature is separate from the Emergency Call
feature, and you must configure it separately.
CAUTION
The Mandown feature only functions when the handset is
in idle mode. If the handset is in any other mode (for
example, if you are in a call) the Mandown feature is
unavailable.
Activating or deactivating Mandown
To activate or deactivate the Mandown feature, perform the following
steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
210
Telephone settings
2. Press the Up or Down key to highlight the
Mandown call option.
Mandown call
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Mode
option.
Mode
Select
5. Press the Select soft key.
6. Press the Up or Down key to select the required
option
Select
•
on - to activate mandown feature
•
off - to deactivate Mandown feature
7. Press the Select soft key to apply the changes.
8. Press the Clr key one or more times to return to the
idle display.
Configuring the Mandown call number
To configure the number the handset calls in the event of a Mandown
event, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the
Mandown call option.
Mandown call
Select
3. Press the Select soft key.
211
Telephone settings
4. Press the Up or Down key to highlight the Number
option.
Number
Select
Lookup contact
5. Press the Select soft key.
6. Press the Up or Down key to highlight Lookup
contact, press the Select soft key, press the Up or
Down key to highlight the required number from
your contacts list, and press the Select soft key.
Select
OR
Select
OR
Enter number
Press the Up or Down key to highlight Enter
Number, press the Select soft key, use the
Dialpad to enter or edit the number, and press the
Save soft key.
Select
Save
7. Press the Clr key one or more times to return to the
idle display.
Create a Mandown text message
To compose a text message that the Mandown feature sends instead of
the Mandown call, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
212
Telephone settings
2. Press the Up or Down key to highlight the
Mandown call option.
Mandown call
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the
Message option.
Message
5. Press the Select soft key.
Select
6. Use the Dialpad to enter the text of the emergency
message.
Save
7. Press the Save soft key.
8. Configure the emergency call number to which to
send the message.
9. Press the Clr key one or more times to return to the
idle display.
When the Mandown call Auto answer option is enabled, the handset
automatically answers the next incoming call after the Mandown
notification is performed, and enables the speaker and handsfree profile.
Attention: If you configure a text message for Mandown, the
Auto answer feature does not apply to Mandown
calls.
Enabling Mandown Auto answer
To enable Auto answer for a Mandown call, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
213
Telephone settings
2. Press the Up or Down key to highlight the
Mandown call option.
Mandown call
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the Auto
answer option.
Auto answer
Select
5. Press the Select soft key.
6. Press the Up or Down key to select the required
option:
— on - to activate auto answer feature
— off - to deactivate auto answer feature
Select
7. Press the Select soft key to apply the changes.
8. Press the Clr key one or more times to return to the
idle display.
Configuring Mandown call Delay
To control how long the handset waits after it detects that the handset has
left the vertical orientation before it sets the Mandown condition, configure
the Mandown Call Delay using the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the
Mandown call option.
Mandown call
Select
214
3. Press the Select soft key.
Telephone settings
4. Press the Up or Down key to highlight the Delay
option.
Delay
Select
5. Press the Select soft key.
6. Press the Up or Down key to select the required
option:
— off - to disable the delay.
— 5s
— ...
— 240s - to define a delay period in seconds.
Select
7. Press the Select soft key to apply the changes.
8. Press the Clr key one or more times to return to the
idle display.
Configuring Mandown call Prealarm time
To control how long the handset waits after it sets the Mandown condition
before dialling the Mandown call number or sending the Mandown text
message, configure the Mandown call Prealarm time using the following
steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
2. Press the Up or Down key to highlight the
Mandown call option.
Mandown call
Select
3. Press the Select soft key.
215
Telephone settings
4. Press the Up or Down key to highlight the
Prealarm time option.
Prealarm time
Select
5. Press the Select soft key.
6. Press the Up or Down key to select the required
option:
— off - to disable the prealarm.
— 5s
— ...
— 240s - to define a delay period in seconds.
Select
7. Press the Select soft key to apply the changes.
8. Press the Clr key one or more times to return to the
idle display.
Activating the Silent charging feature
Activate the Silent charging feature if you do not want the handset to ring
or vibrate while in the charger. Operation returns to normal when you lift
the handset from the charger.
CAUTION
If you configure your handset to use Silent charging, any
Alarms you configure cannot provide an audible alert
while the handset is on the charger.
To activate the Silent charging feature, perform the following steps:
1. Open the Calls menu using the steps in “Accessing
the call settings menu” (page 196).
216
Telephone settings
2. Press the Up or Down key to highlight the Silent
charging option.
Silent charging
3. Press the Select soft key.
Select
4. Press the Up or Down key to select the required
option:
— Off to disable silent charging
Off
Discon.
Silent
— Discon. to disconnect from the CS 1000
system while in the charger
— Silent to turn off the vibrator and ringer while in
the charger
Attention: Auto-answer mode remains active when
you select the Silent option.
Even if you choose Silent charging, the handset
continues to ring when you place it in the charger.
Select
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Connectivity settings
You can configure the connectivity settings for your handset as follows:
•
Register
For information about registering the handset, see “Subscribing the
handset to a DECT system” (page 47).
•
Deregister
For information about deregistering the handset, see “Deregistering
the handset” (page 51).
217
Telephone settings
•
Selecting a network
For information about selecting a network, see “Manually selecting
the DECT system” (page 49).
•
Bluetooth wireless technology
Attention: Support for Bluetooth wireless technology is available on
the Avaya 4070 and 4075 DECT Handsets only.
For more information about configuring Bluetooth wireless
technology, see:
— “Bluetooth wireless technology module installation” (page 234)
— “Bluetooth wireless technology headset installation” (page 238)
218
Accessing additional features using FFC or SPRE codes
Accessing additional features
using FFC or SPRE codes
Attention: FFC and SPRE codes are not applicable to SIP DECT
system.
Use Flexible Feature Codes (FFC) and Special Prefix (SPRE) codes to
access additional features. Contact your system administrator to check if
these features are available for your use. You can use the two types of
codes as follows:
•
FFC codes—dial an FFC to access some of your handset features.
To use an FFC, enter the FFC and press the Call key.
•
SPRE codes—dial a SPRE code plus a one- or two-digit number to
access some of your handset features. The SPRE codes are unique
to your system; however, the digits that follow the SPRE are fixed.
For example, dial SPRE + 74 to forward all your calls to another
number.
219
Accessing additional features using FFC or SPRE codes
To access additional features using FFC or SPRE codes:
1. Use the Dialpad to enter the FFC or SPRE code
while the handset is idle.
2. Press the Call key.
Attention: Contact your system administrator for the specific FFC and
SPRE code numbers.
Use the following table to record FFC or SPRE codes for features
available on your system, based on the information provided by your
system administrator.
Table 16: FFCs and SPRE codes
FFC or SPRE code
Feature
Call Forward— to activate
Call Forward— to deactivate
220
Handset accessories
Handset accessories
This section describes the accessories that you can use with your
handset:
•
“Available accessories” (page 221)
•
“Belt clip” (page 223)
•
“Installing the headset” (page 227)
•
“Removing and installing the battery pack (4075 only)” (page 227)
•
“Charging the battery pack (4075 only)” (page 229)
•
“MEM card installation and removal” (page 231)
•
“Bluetooth wireless technology module installation” (page 234)
•
“Bluetooth wireless technology headset installation” (page 238)
Available accessories
The following table lists the accessories available for the Avaya 4027,
4070, and 4075 DECT Handsets.
Table 17: List of accessories
Item
Description
Order code
Multi Charger
(for 4027 and
4070)
Multi Charger allows you to charge
up to eight Avaya 4027 and 4070
DECT Handsets. Universal AC
Adapter included.
N0162958
Desktop
Charger (for
4027 and 4070)
Desktop Charger for Avaya 4027 and
4070 DECT Handsets.
N0162957
AC Adapter Int
(for 4027 and
4070)
AC Adapter for Desktop Charger—
International mains plug.
N0162959
221
Handset accessories
Item
Description
Order code
AC Adapter UK
(for 4027 and
4070)
AC Adapter for Desktop Charger—
UK mains plug.
N0162962
AC Adapter
ANZ (for 4027
and 4070)
AC Adapter for Desktop Charger—
Australia and New Zealand mains
plug.
N0162961
Battery Pack
(for 4027 and
4070)
Extra handset battery pack for Avaya
4027 and 4070 DECT Handsets.
N0165276
Belt Clip (for
4027 and 4070)
Extra belt clip for Avaya 4027 and
4070 DECT Handsets.
N0162963
Handset Carry
Case (for 4027
and 4070)
Carry case for Avaya 4027 and 4070
DECT Handsets.
N0162964
Multi Charger
(for 4075)
Multi Charger allows you to charge
up to six Avaya 4075 DECT
Handsets. Universal AC Adapter
included.
N0206073
Desktop
Charger (for
4075)
Desktop Charger for Avaya 4075
DECT Handsets.
N0206072
AC Adapter
Universal (for
4075)
AC Adapter for Desktop Charger—
universal mains plug.
N0206074
Battery Pack
(for 4075)
Extra handset battery pack for Avaya
4075 DECT Handsets.
N0206076
Belt Clip (for
4075)
Extra belt clip for Avaya 4075 DECT
Handsets.
N0206075
Horizontal
Handset Carry
Case (for 4075)
To carry the Avaya 4075 DECT
Handset horizontally.
N0206788
222
Handset accessories
Item
Description
Order code
Vertical
Handset Carry
Case (for 4075)
To carry the Avaya 4075 DECT
Handset vertically.
N0206789
MEM Card
Replacement memory (MEM) card
for Avaya 4027, 4070 and 4075
DECT Handsets.
N0162965
Headset
Headset for Avaya 4027, 4070 and
4075 DECT Handsets.
A0550712
Bluetooth
wireless
technology
Module
Bluetooth wireless technology
module for the Avaya 4070 and 4075
DECT Handsets.
N0162966
Belt clip
You can use the belt clip to fasten the handset on a belt (swivel belt clip),
shirt, or coat pocket (executive clip).
Installing the belt clip
To install the belt clip, perform the following steps:
1. Place the handset face down on a flat surface.
2. If you have a Avaya 4075 DECT Handset, unscrew the belt clip
compartment cover, install the belt clip and tighten the screws.
If you have an Avaya 4027 or 4070 DECT Handset, go to step 3.
3. Use the plastic tool to unlock the fastening of the belt clip
compartment cover as shown in Figure 17.
The plastic tool is shipped in the box with the handset.
4. Slide out the belt clip compartment cover.
5. Remove the plastic tool.
6. Install the swivel belt clip as shown in Figure 18 or the executive clip
as shown in Figure 19.
223
Handset accessories
Figure 17: Using plastic tool (only for 4027 and 4070)
Plastic tool
Belt clip
compartment
cover
Handset
224
Handset accessories
Figure 18: Installed swivel belt clip (only for 4027 and 4070)
Swivel belt
clip
Handset
Figure 19: Installed executive clip
Executive
clip
Handset
225
Handset accessories
Uninstalling the belt clip
To uninstall the belt clip, perform the following steps:
1. Place the handset face down on a flat surface.
2. If you have an Avaya 4075 DECT Handset, unscrew the belt clip,
install the belt clip compartment cover and tighten the screws.
If you have an Avaya 4027 or 4070 DECT Handset go to step 3.
3. Use the plastic tool to unlock the belt clip fastening.
The plastic tool is shipped in the box with the handset.
4. Slide out the belt clip.
5. Remove the plastic tool.
6. Install the belt clip compartment cover as shown in Figure 20.
Figure 20: Belt clip compartment cover
Belt clip
compartment
cover
Handset
226
Handset accessories
Installing the headset
To use the optional wired headset with your Avaya 4027, 4070, or 4075
DECT Handset, install it as shown in the following figure.
Note: (4075 only) The headset jack is covered by a protective plug.
Remove it before installing the headset.
Figure 21: Installing the headset
Headset
connector
Headset
Removing and installing the battery pack
(4075 only)
Use the following steps to remove and install the battery pack and cover:
1. Place the handset face down on a flat surface.
2. Unlock the battery cover as shown in Figure 22.
3. Remove the battery compartment cover.
227
Handset accessories
4. If you need:
to install a memory (MEM) card, see “MEM card installation and
removal” (page 231);
to install a Bluetooth wireless technology module, see “Bluetooth
wireless technology module installation” (page 234);
to charge the battery pack refer, see “Charging the battery pack
(4075 only)” (page 229).
5. Install the battery pack, pushing it into the casing as shown in
Figure 23.
6. Press the battery pack down until it locks.
7. Install the battery cover and lock it.
Figure 22: Unlocking the battery cover
228
Handset accessories
Figure 23: Installing the battery pack
Charging the battery pack (4075 only)
You can charge the battery for your Avaya 4075 DECT Handset without
having the battery installed in the handset.
Use the following steps to charge the battery pack:
1. If the battery pack is installed in the handset, remove it. See
“Removing and installing the battery pack (4075 only)” (page 227) for
more information.
2. Remove the plastic cover that protects the battery charger slot.
229
Handset accessories
3. Insert the battery pack into the charger slot as shown in Figure 24.
Attention: Insert the battery pack in the same orientation as it is
shown in the figure, otherwise the battery pack
cannot charge. When the battery pack is correctly
inserted, the indicator lamp lights.
When the battery pack is fully charged, the indicator lamp goes out.
4. Remove the battery pack from the charger, and replace the protective
plastic cover over the battery charger slot.
5. Install the battery pack in the handset. See “Removing and installing
the battery pack (4075 only)” (page 227) for more information.
Figure 24: Charging the battery pack
230
Handset accessories
MEM card installation and removal
You can install an optional removable memory (MEM) card in your Avaya
4027, 4070, or 4075 DECT Handset. The MEM card allows you to
personalise your handset.
Attention: You can operate your handset without a MEM card. An
installed MEM card allows you to personalise the handset
and retain subscriber data. As well, using a MEM card
makes it much easier for you to transfer your data, such as
contacts, calendar entries, messages, and call filter
information, to another handset.
If you install a blank MEM card, the handset automatically copies
configuration data to the MEM card. When this happens, the DECT
subscriptions of the handset are copied onto the MEM card and removed
from the handset memory. This ensures that two handsets never have
identical subscription data.
If you install a MEM card that already contains configuration data for an
Avaya 4027, 4070, or 4075 DECT Handset, the configuration data on the
MEM card is used, and any configuration data already on the handset is
ignored. The parameters stored in the handset memory are not affected,
including existing subscriptions that are stored in the handset memory.
Once you have installed the MEM card, all configuration changes,
contacts, messages, call entries, calendar items, and new call filter
entries are stored on the MEM card only -- not in the handset memory.
The parameters that are stored in the handset memory remain intact but
are not accessible unless you remove the installed MEM card from the
handset.
Attention: You can erase the contents of the MEM card using
“Resetting the MEM card” (page 172). If you do so, the
subscription information stored on the MEM card is lost, and
you must re-subscribe your handset to the DECT system.
Any configuration changes, contacts, messages, call
entries, calendar items, and call filter items you added after
installing the MEM card in the handset are lost.
231
Handset accessories
You must remove the battery pack before you can remove or install the
MEM card. Reinstall the battery pack after you remove or install the MEM
card. The MEM card tray is under the battery pack on the back of the
handset.
Extracting the MEM card from the frame
To install the MEM card into the handset, you must extract it from the
frame.
Attention: A new MEM card is delivered in a larger frame; use the
following procedure to remove it from the frame before you
install it into the handset.
To extract the MEM card from the frame, perform the following step:
1. Remove the MEM card from the frame as shown in the following
figure.
Figure 25: Extracting the MEM card from the frame
Attention: When you remove the MEM card from the frame, do not
touch the metal contacts.
Installing the MEM card
To install the MEM card in the handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover and the battery.
Note: For information about removing the Avaya 4027 or 4070 DECT
Handset battery compartment cover, see “Installing the battery pack
(4027 and 4070 only)” (page 18).
232
Handset accessories
Note: For information about removing the Avaya 4075 DECT
Handset battery compartment cover, see “Removing and installing
the battery pack (4075 only)” (page 227).
3. Slide in the MEM card from under the two small crescents and press
it, as shown in Figure 26.
4. Ensure that you have inserted the MEM card completely.
Figure 26: Installing the MEM card
Handset
Insert
Memory
card
Removing the MEM card
To remove the MEM card from the handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover and the battery.
3. Slide out the MEM card under the two small crescents, as shown in
Figure 27.
233
Handset accessories
Figure 27: Removing the MEM card
Handset
Memory
card
Pull
Bluetooth wireless technology module
installation
Your Avaya 4070 and 4075 DECT Handsets are equipped with a radio
system to support Bluetooth wireless technology enabled headsets.
Ensure that you are familiar with the operation of the navigation keys
234
Handset accessories
before you attempt to use Bluetooth wireless technology. For more
information about handset controls, see “Handset controls” (page 35).
Attention: This feature is available on the Avaya 4070 and 4075 DECT
Handsets only. Contact your system administrator to
determine if you can use the Bluetooth wireless technology
feature with your handset.
To install or remove the Bluetooth wireless technology module, you must
remove the battery pack.
Installing the Bluetooth wireless technology module on your Avaya
4070 or 4075 DECT Handset
To install the Bluetooth wireless technology module on your Avaya 4070
or 4075 DECT Handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover and the battery.
Note: For information about removing the Avaya 4027 or 4070 DECT
Handset battery compartment cover, see “Installing the battery pack
(4027 and 4070 only)” (page 18).
Note: For information about removing the Avaya 4075 DECT
Handset battery compartment cover, see “Removing and installing
the battery pack (4075 only)” (page 227).
3. Slide the Bluetooth wireless technology module into the compartment
as shown in Figure 28.
Note: On the Avaya 4075 DECT Handset, the Bluetooth wireless
technology compartment is oriented 90 degrees clockwise in
comparison to Avaya 4070 DECT Handset.
4. Replace the cover after you reinstall the battery pack as shown in
Figure 2.
235
Handset accessories
Figure 28: Bluetooth wireless technology module installed
Handset
Bluetooth
wireless
technology
module
Removing the Bluetooth wireless technology module from your
Avaya 4070 or 4075 DECT Handset
To remove the Bluetooth wireless technology module from your Avaya
4070 or 4075 DECT Handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover and the battery.
Note: For information about removing the Avaya 4070 or 4075 DECT
Handset battery compartment cover, see “Installing the battery pack
(4027 and 4070 only)” (page 18).
Note: For information about removing the Avaya 4075 DECT
Handset battery compartment cover, see “Removing and installing
the battery pack (4075 only)” (page 227)
3. Pull the Bluetooth wireless technology module from the compartment
as shown in Figure 29.
236
Handset accessories
Note: On the Avaya 4075 DECT Handset, the Bluetooth wireless
technology compartment is oriented 90 degrees clockwise in
comparison to Avaya 4070 DECT Handset.
4. Reinstall the battery pack as shown in Figure 2.
5. Replace the battery cover.
Figure 29: Bluetooth wireless technology module removed
Handset
Bluetooth
wireless
technology
module
237
Handset accessories
Bluetooth wireless technology headset
installation
You can install a Bluetooth wireless technology headset on your handset.
The following table describes the Bluetooth wireless technology headset
status icons.
Table 18: Bluetooth wireless technology headset status
Icon
Description
Connected
Disconnected
In conversation
This section describes the following tasks:
•
“Accessing the Bluetooth wireless technology configuration menu”
(page 238)
•
“Enabling and disabling Bluetooth wireless technology connectivity”
(page 240)
•
“Adding a Bluetooth wireless technology headset” (page 240)
•
“Connecting and disconnecting a paired Bluetooth wireless
technology headset” (page 241)
•
“Deleting a Bluetooth wireless technology headset” (page 242)
Accessing the Bluetooth wireless technology configuration menu
To access the Bluetooth wireless technology configuration menu, perform
the following steps:
Menu
238
1. Press the Menu soft key to access the Main menu.
Handset accessories
2.
Select
Press the Up or Down key to highlight the
Settings icon.
3. Press the Select soft key.
4. Press the Left or Right key to choose the
Connectivity option.
5. Press the Up or Down key to highlight the
Bluetooth option.
Bluetooth
Select
6. Press the Select soft key.
239
Handset accessories
Enabling and disabling Bluetooth wireless technology connectivity
To enable and disable Bluetooth wireless technology connectivity,
perform the following steps:
Bluetooth
1. Open the Bluetooth configuration menu using the
steps in “Accessing the Bluetooth wireless
technology configuration menu” (page 238).
2. If the first menu option is Disabled, press the
Select soft key, and then press the Yes soft key to
enable Bluetooth wireless technology.
OR
If the first menu option is Enabled, press the Select
soft key, and then press the Yes soft key to disable
Bluetooth wireless technology.
3. Press the Clr key one or more times to return to the
idle display.
Adding a Bluetooth wireless technology headset
To add a Bluetooth wireless technology headset, perform the following
steps:
Bluetooth
1. Open the Bluetooth configuration menu using the
steps in “Accessing the Bluetooth wireless
technology configuration menu” (page 238).
2. If Bluetooth wireless technology is disabled, enable
it using the steps in “Enabling and disabling
Bluetooth wireless technology connectivity”
(page 240).
3. Start pairing mode on your Bluetooth wireless
technology headset (see the headset
documentation).
240
Handset accessories
4. Press the Up or Down key to highlight the Search
for devices option.
Search for devices
Pair
Attention: If the search process is successful,
proceed to step 5. If the search is unsuccessful,
repeat steps 3 to 4.
5. Press the Pair soft key and add the headset.
6. Use the Dialpad to enter the PIN code of your
Bluetooth wireless technology headset (see the
headset documentation).
Connect
7. Press the Connect soft key to connect the device.
8. Press the Clr key one or more times to return to the
idle display.
Connecting and disconnecting a paired Bluetooth wireless
technology headset
Once you have added a Bluetooth wireless technology headset, the
headset automatically connects to the DECT Handset when the two
devices are active, and are in range of each other. The DECT Handset
disconnects the Bluetooth wireless technology headset if the handset is
inactive or out-of-range.
To manually connect or disconnect a Bluetooth wireless technology
handset, perform the following steps:
Bluetooth
1. Open the Bluetooth configuration menu using the
steps in “Accessing the Bluetooth wireless
technology configuration menu” (page 238).
241
Handset accessories
2. Press the Up or Down key to highlight the Paired
devices option.
Paired devices
Select
3. Press the Select soft key.
4. Press the Up or Down key to highlight the required
device.
Connect
Discon.
R
5. Press the Connect or Discon. soft key to connect
or disconnect the headset.
6. Press the Clr key one or more times to return to the
idle display.
Deleting a Bluetooth wireless technology headset
To delete a Bluetooth wireless technology headset, perform the following
steps:
Bluetooth
1. Open the Bluetooth configuration menu using the
steps in “Accessing the Bluetooth wireless
technology configuration menu” (page 238).
2. Press the Up or Down key to highlight the Paired
devices option.
Paired devices
3. Press the Select soft key.
Select
4. Press the Up or Down key to highlight the required
device.
More
242
5. Press the More soft key.
Handset accessories
6. Press the Up or Down key to highlight the Delete
option.
Delete
Yes
7. Press the Yes soft key to confirm the deletion.
R
8. Press the Clr key one or more times to return to the
idle display.
243
Handset accessories
244
Terms you should know
Terms you should know
Avaya Communication Server 1000 (Avaya CS 1000)
Your office Private Branch Exchange system.
DECT
Digital Enhanced Cordless Telecommunications
Directory Number (DN)
A number that consists of one to seven digits for a telephone.
Also known as an extension number.
Flexible Feature Code (FFC)
Specialised codes entered using the dialpad that enable features
(for example, Ring Again).
Key lock
A feature used to disable key input and prevent accidental
operation.
Long Press
Press and hold a key for 2 seconds and then release it.
MEM card
A removable memory card (storage device) for contacts,
messages, call logs, and subscriptions.
SIP DECT
Avaya VoIP DECT system that uses the SIP protocol to establish
calls.
245
Terms you should know
Soft keys
Two keys located below the display, that have different functions
and labels depending on the current operational mode of the
handset
System or Switch
Your office communication system.
Traditional DECT
Avaya DECT system based on DMC cards.
Voice mail
A system that allows you to exchange spoken messages with
other users.
246
Index
Index
A
accessing additional features
using FFC or SPRE codes 220
accessing general settings menu
156
accessing the caller filter menu
200
accessories 221
alerts
accessing the sounds and
alerts menu 174
configuring alert volume 180
configuring Cadence Mode
187
configuring ring volume 175
defining ring external melody
175
defining ring internal melody
176
defining tone melody 181
enabling charger warning 186
enabling confirmation sound
184
enabling coverage warning
185
enabling increasing alert 181
enabling increasing ring 179
enabling key sound 183
enabling vibrator 182
normal message melody 177
ring emergency melody 179
ring unknown call melody 177
urgent message melody 178
all calls list 70
accessing 70
deleting all entries 75
deleting an entry 74
dialling a number 71
transferring a number to the
caller filter list 73
transferring a number to your
contacts list 72
viewing information about a
call 71
answer mode
any key 198
autoanswer 198
normal 199
answer mode configuration 197
answered calls list 75
accessing 76
deleting all entries 80
deleting an entry 79
dialling a number 77
transferring a number to the
caller filter list 78
transferring a number to your
contacts list 77
viewing information about a
call 76
answering calls 60
Auto-answering mode 61
muting the ringer 61
Normal mode 61
rejecting a call 62
with any key 61
appointments
adding 136
copying 140
deleting 141
editing 138
selecting a date 135
viewing 137
247
Index
audio settings 173
automatic dialpad lock 167
Automatic key lock feature 167
Avaya 4027 and 4070 DECT
Handsets configuration 46
Avaya 4027/4070 DECT Handset
installation 46
B
batteries 22
charge display 25
charging and operating times
24
charging guidelines 23
important information 22
installing the battery pack 18
battery charge display 25
Installing the module on Avaya
4070 DECT Handset
235
Bluetooth wireless technology
module
removing the module 236
C
calculator 143
calculator icons 145
calculator, stopwatch, and alarms
143
calendar 133
accessing 134
changing the format 134
call and message statistics 197
call mode 29, 38
battery pack
call settings 196
charging (4075 only) 229
installing or removing (4075
only) 227
belt clip 223
call settings menu 196
installing 223
uninstalling 226
Bluetooth wireless module
installing 18
Bluetooth wireless technology
accessing the configuration
menu 238
adding a headset 240
connecting and disconnecting
a headset 241
deleting a headset 242
enabling and disabling a headset 240
headset installation 238
module installation 234
Bluetooth wireless technology
headset
248
Caller filter
activating 205
deactivating 206
Caller filter configuration 200
Caller filter list
adding an entry 201
deleting all entries 204
deleting an entry 203
editing an entry 202
Caller list icons 69
calling features 53
Calls 53
calls list 68
Charge display 25
charge display 25
charger
installing 20
Index
charging the batteries 22
CLID (Calling Line Identification)
68
configuring shortcuts 163
connectivity settings 217
contacts 93
accessing the contacts menu
94
adding a contact name 99
adding a contact number 95
adding a contact ringtone 100
adding a new contact 94
deleting a contact 101
deleting a contact number 98
editing a contact number 96
controls 35
key functions in call mode 38
key functions in dialogue mode
40
key functions in edit mode 41
key functions in idle mode 36
key functions in menu mode 40
locking or unlocking the dialpad 45
dialling a number 82
transferring a number to the
caller filter list 84
transferring a number to your
contacts list 82
viewing information about a
call 81
dialogue mode 31, 40
directory number 245
display 26
dialogue area 29
icon line 27
LED 33
soft key line 33
Display areas 26
display settings 189
display settings menu
accessing 189
DN 245
during a call 62
adjusting the headset or loudspeaker volume 62
using mute 63
E
D
daily alarm
creating 148
editing 149
turning off 150
date
edit mode 32, 41
emergency call 206
creating a text message 208
number configuration 207
configuring 161
DECT system configuration 46
F
DECT system name 47
FFC codes 219
dialled calls list 81
first value 195
accessing 81
deleting all entries 85
deleting an entry 85
feature overview 13
Flexible Feature Code (FFC) 245
249
Index
G
general settings 155
getting started 18
H
handset
resetting to factory defaults
171
handset accessories 221
handset controls 35
handset information 173
handset name
defining 170
headset
installing 227
57
dial using the telephone book
56
dialling 54
loudspeaker 55
predialling 54
SOS 59
speed dial 55
Mandown
activating or deactivating 210
Mandown call
auto answer 213
delay 214
number 211
prealarm time 215
text message 212
Mandown configuration 209
I
Manually selecting the DECT
system 49
icon line 27
MEM card
K
extracting from the frame 232
installation and removal 231
installing 18, 232
removing 233
resetting 172
menu mode 31, 40
Key functions in Idle mode 36
message limitations 108
idle mode 29, 36
inbox 114
installing the charger 20
message list full 132
L
Message settings 125
language 162
message settings 125
LED indicator 33
messages 105, 107
configuring 164
lock/unlocking the dialpad 45
locking your phone 166
M
making calls 53
dial using the Central Directory
250
accessing the message settings menu 125
accessing the Messaging Inbox 114
accessing the messaging
menu 108
accessing the sent messaging
menu 121
Index
deleting a draft 112
deleting a sent message 123
deleting all drafts 113
deleting all incoming messages 119
deleting all sent messages 124
deleting an incoming message
118
forwarding a sent message
122
forwarding an incoming message 116
inbox 114
new messages and drafts 108
normal and urgent 130
overwrite 125
reading a sent message 121
reading an incoming message
115
replying to an incoming message 115
saving a new message or editing a draft 109
saving sender’s number to
contacts 118
sending a message 110
sent message option 127
sent messages 121
messaging 105, 107
missed calls list 86
accessing 87
deleting all entries 92
deleting an entry 91
dialling a number 89
transferring a number to the
caller filter 90
transferring a number to your
contacts list 89
viewing information about a
call 88
mute
during a call 63
muting the ringer 61
N
normal answer mode configuration
199
O
on/off switch 26
P
PARK code 47
phone lock 166
profile
editing 158
profiles 156
R
recurrent alarm
creating 151
editing 152
turning off 153
regulatory and safety Information
14
regulatory and safety information
14
resetting the handset 171
resetting the MEM card 172
Ring external melody 175
Ring unknown call melody 177
S
safety precautions 16
second value 195
Security options 164
security options 165
251
Index
silent charging
activating 216
soft key line 33
configuring 160
time and date 160
transfer a call 63
SOS calls
transferring a call 63
making 59
speed dial 101
Transferring phone numbers to the
caller filter list 206
assigning a speed dial number
102
clearing the speed dial number
103
reassigning the speed dial
number 102
SPRE codes 219
transferring phone numbers to the
caller filter list 104
startup image 192
transferring phone numbers to the
contacts 104
V
Voice mail 64
clearing 194
selecting by theme 193
selecting from outside the current theme 193
stopwatch 145
voice mail 64
switching the handset on or off 26
W
system configuration
wallpaper 189
accessing the connectivity
menu 46
derigistering the handset 51
editing the system name and
phone number 51
enabling automatic DECT system selection 50
manually selecting the DECT
system 49
subscribing the handset to a
DECT System 47
T
telephone settings 155
theme
selecting 192
time
252
accessing 65
defining a voice mail number
66
clearing 191
selecting by theme 190
selecting from outside the
theme 190
Download PDF

advertising