Owner`s manual | Aprilaire 8800 UNIVERSAL Thermostat User Manual

Model 8800 Universal
Communicating Thermostat
Owner’s Manual
Includes
Operating Instructions and
Warranty Information
READ AND SAVE THESE INSTRUCTIONS
61000762A 8800 Tstat Owners.indd 1
3/28/11 4:19:57 PM
Table of contents
About your new thermostat
PROGRAMMING
Thermostat features . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Controls & display overview . . . . . . . . . . . . . . . . . . . . 4-5
Operation
Select system mode (HEAT/COOL) . . . . . . . . . . . . . . . .
Change temperature set point . . . . . . . . . . . . . . . . . . .
Select fan setting (ON/AUTO/CIRC) . . . . . . . . . . . . . . .
Clean screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance reminders . . . . . . . . . . . . . . . . . . . . . . . .
Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
7
7
7
8
HUMIDISTAT FUNCTIONS
Humidistat control screen . . . . . . . . . . . . . . . . . . . . . . . 9
How to enter the setup menu
to change Humidistat Mode . . . . . . . . . . . . . . . . . . . . 10
NETWORK FEATURES
Set time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Understanding program schedules . . . . . . . . . . . . . 13-14
Progressive recovery . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Changing program schedules . . . . . . . . . . . . . . . . . 15-16
Program schedule holds
Temporary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Permanent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Vacation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
SETUP MENU
How to enter the setup menu
to change settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
User system settings table . . . . . . . . . . . . . . . . . . . 21-22
Warranty
Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Warranty registration . . . . . . . . . . . . . . . . . . . . . . . . . 23
Network override . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2
61000762A 8800 Tstat Owners.indd 2
3/28/11 4:19:57 PM
About your new thermostat
WARNING
Do not use sharp instruments to press touch screen. Only use your fingertips.
Thermostat Features
• Large touch screen with adjustable backlight – constant backlight available.
• Message center provides feedback and instructions.
• 7 day programmability or separately programmable weekday/weekend schedules.
• Thermostat can be removed from the wall for easy programming (batteries must be installed).
• Front battery door access for fast, easy replacement.
• Displays room temperature, room humidity, temperature setting, and optional outdoor temperature.
• Air filter, humidifier, dehumidifier, and HVAC service indicators.
• Programmable fan control with fan circulation mode.
• Easy to use temperature control can override program schedule at any time.
• Progressive recovery ensures proper temperature at the start of a program event.
• Built in compressor protection prevents damage to your equipment.
• RS485 communications ready.
• Universal system compatibility.
• Configurable to control a humidifier and dehumidifier.
3
61000762A 8800 Tstat Owners.indd 3
3/28/11 4:19:57 PM
About your new thermostat
Controls & display overview – Home Screen
ROOM TEMPERATURE
Current DAY
OUTDOOR TEMPERATURE
ROOM RELATIVE HUMIDITY
TEMPERATURE SETTING
FAN MODE
BUTTON
Temperature
ADJUSTMENT
FAN MODE
SETTING
HOLD BUTTON
SYSTEM MODE
BUTTON
(IN PROGRAMMABLE MODE
SETS OR CLEARS HOLD)
NETWORK OVERRIDE
SYSTEM MODE
SETTING
(IN NON-PROGRAMMABLE MODE)
Heat pump mode only
Emergency/AUXILIARY
heat (RED)
System FAULT (YELLOW)
EQUIPMENT
STATUS
Indicator shows through housing
MESSAGE
CENTER
(SCROLLING TEXT)
LOW BATTERY
INDICATOR
4
CURRENT TIME & DATE
MAIN MENU BUTTON
Note: Backlight is activated with first button press and automatically turns off.
61000762A 8800 Tstat Owners.indd 4
3/28/11 4:19:59 PM
About your new thermostat
Controls & display overview – MAIN MENU
CLEAN SCREEN
(LOCKOUT TOUCH SCREEN
FOR 30 SECONDS)
SET VACATION HOLD
(HOLD–TO TIME AND DATE)
SET CURRENT TIME
SET SCHEDULE
BUTTON
SET CURRENT DATE
DONE BUTTON
(EXIT MENU)
USER SYSTEM SETTINGS
5
61000762A 8800 Tstat Owners.indd 5
3/28/11 4:20:01 PM
Operation
Select system mode
(EM HEAT/HEAT/OFF/COOL/AUTO)
Change temperature set point
Press [MODE] to select:
EM HEAT: (only for heat pumps with auxiliary heat)
Thermostat controls auxiliary heat. Heat pump will not
operate in EM HEAT mode.
HEAT: Thermostat controls only the heating system.
Press
or
to adjust the current set point.
(See Program Schedule Holds on pages 17-19 for more
information.)
OFF: Heating and cooling systems are off.
COOL: Thermostat controls only the cooling system.
AUTO: (if enabled in installer setup) Thermostat
automatically selects heating or cooling depending on
the indoor temperature.
Press [DONE] to save and exit, or [CANCEL] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 10 seconds.
6
61000762A 8800 Tstat Owners.indd 6
3/28/11 4:20:01 PM
Operation
Select fan setting (ON/AUTO/CIRC)
When the fan mode is changed during a program event
it remains in that mode until the next event starts. The
fan must be programmed to FAN ON in the schedule to
run continuously through all events.
Clean Screen
Press [MENU] to enter the main menu.
Press [CLEAN SCREEN] to disable the touch screen
for 30 seconds for cleaning.
Note: Use a soft damp cloth to clean the screen. Use
water or household glass cleaner. Do not spray liquids
directly on the screen.
MAINTENANCE REMINDERS
Press [FAN] to select:
ON: Fan runs continuously. Use this mode for maximum
air circulation/cleaning.
AUTO: Fan runs only when the heating or cooling
system is on.
Maintenance reminders are set up by the installer to
indicate when the equipment is due for service. If a
maintenance reminder is displayed, call your HVAC
dealer for service. They can be cleared by pressing
[MENU] to enter the main menu, then [Next] to clear
each reminder.
CIRC: Same as AUTO, but ensures the fan is on for at
least 20 minutes per hour. Use this mode for a balance
of energy savings and air circulation/cleaning.
Press [DONE] to save and exit, or [CANCEL] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 10 seconds.
7
61000762A 8800 Tstat Owners.indd 7
3/28/11 4:20:01 PM
Operation
Battery REPLACEMENT
Batteries are not required for proper operation. The
thermostat is a 24VAC powered device with a battery
back-up for the clock.
RESET
BUTTON
The thermostat has a memory backup that saves the
thermostat’s settings in case of a power interruption.
The system settings will be retained but the clock will
reset after 90 seconds with no battery or AC power.
Replace the batteries every year or when the low
battery indicator comes on.
The reset button located under the battery cover can be
used to reset the thermostat to factory defaults.
WARNING
The reset button should only be used by the installer.
8
61000762A 8800 Tstat Owners.indd 8
3/28/11 4:20:02 PM
HUMIDISTAT FUNCTIONS
HUMIDISTAT CONTROL SCREEN
The Model 8800 has the option of being configured as a humidistat that can control a humidifier and dehumidifier.
Note: Humidistat mode is selected in the user setup menu.
ROOM RELATIVE HUMIDITY
ROOM RELATIVE HUMIDITY SETPOINT
Current DAY
HUMIDIFIER ADJUSTMENT
MESSAGE
CENTER
(SCROLLING TEXT)
OUTDOOR TEMPERATURE
DEHUMIDIFIER ADJUSTMENT
CURRENT TIME
& DATE
NETWORK OVERRIDE
(IF ENABLED)
MAIN MENU BUTTON
9
61000762A 8800 Tstat Owners.indd 9
3/28/11 4:20:03 PM
HUMIDISTAT FUNCTIONS
How to enter the setup menu to change HUMIDISTAT MODE
Press [MENU] to enter the main menu.
Press [SETUP] to enter the setup menu.
Press
flashes.)
or
to adjust the setting. (Selected option
Press [DONE] to save and exit, or [CANCEL] to exit
without saving.
The thermostat will discard changes and exit if nothing
is pressed within 60 seconds.
Press [Next] or [Back] to page through the settings,
until you get to the Humidistat Mode Setting (the
setting is displayed in the message center).
MESSAGE CENTER
(SCROLLING TEXT)
10
61000762A 8800 Tstat Owners.indd 10
3/28/11 4:20:04 PM
NETWORK FEATURES
Network Override
The network override feature is only available to be enabled when the thermostat is set to non-programmable mode
or humidistat mode. When enabled, this feature can be used by pressing [HOLD].
security
A four digit security PIN can be enabled to restrict access to the system. If you forget your PIN, you can access the
thermostat with the master PIN 7777.
STATUS INDICATORS
The status indicator is located at the top of the screen. When the thermostat sends or receives messages, the
bars flash across the screen. The message center will display “COMMUNICATION LOST” if the thermostat has not
received communications in the last 15 minutes.
BARS FLASH
ACROSS SCREEN
11
61000762A 8800 Tstat Owners.indd 11
3/28/11 4:20:04 PM
PROGRAMMING
Set TIME
Set Date
Press [MENU] to enter the main menu.
Press [MENU] to enter the main menu.
Press [SET CLOCK] to enter clock menu.
Press [SET DATE] to enter date menu.
Press
Press
or
to set the hour.
Press [Next], then
or
to set the minute.
Press [DONE] to save and exit, or [CANCEL] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 20 seconds.
12
61000762A 8800 Tstat Owners.indd 12
or
to set the month.
Press [Next], then
or
to set the day.
Press [Next], then
or
to set the year.
Press [DONE] to save and exit, or [CANCEL] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 20 seconds.
3/28/11 4:20:05 PM
PROGRAMMING
Understanding program schedules
The daily schedule is split into four events:
WAKE: temperature you would prefer to wake up to.
LEAVE: temperature when you are away from the house.
RETURN: temperature you would prefer to return home to.
SLEEP: temperature you would prefer while sleeping.
The times shown in the table below are the defaults. The start time and temperature of each section can be changed
to fit your schedule. (See Changing Program Schedules section on pages 15-16.)
This thermostat is pre-set to use the following program settings recommended by the Department of Energy
(see table below). These settings are intended to reduce your heating/cooling expenses. The fan program is pre-set
to AUTO for all events.
Set temperature
Event designator
Start time
Heat
Cool
Fan
WAKE
6:00AM
70°F (21°C)
78°F (26°C)
AUTO
LEAVE
8:00AM
62°F (17°C)
85°F (29°C)
AUTO
RETURN
5:00PM
70°F (21°C)
78°F (26°C)
AUTO
SLEEP
10:00PM
62°F (17°C)
82°F (28°C)
AUTO
13
61000762A 8800 Tstat Owners.indd 13
3/28/11 4:20:05 PM
PROGRAMMING
Understanding program schedules (continued)
Optionally, the thermostat can be set to a two event or commercial schedule. (See Setup Menu on page 20.)
Set temperature
Event designator
Start time
Heat
Cool
Fan
WAKE/OCCUPIED
6:00AM
70°F (21°C)
78°F (26°C)
AUTO
LEAVE/UNOCCUPIED
10:00PM
62°F (17°C)
82°F (28°C)
AUTO
Progressive recovery
The Progressive Recovery feature allows the thermostat to activate the heating and cooling equipment prior to an
event in order to reach the desired temperature at the start of the next scheduled event.
Example: If the WAKE time is 6 am, and the temperature is 70°, the heat will come on before 6 am, so the
temperature is 70° by the time you wake at 6 am.
14
61000762A 8800 Tstat Owners.indd 14
3/28/11 4:20:06 PM
PROGRAMMING
Changing program schedules
Press [MENU] to enter the main menu.
Press [SET SCHEDULE] to enter schedule programming.
Press
or
Press [Next], then
the first event.
or
to set the start time of
to select the day.
Press [Next], then
or
to set the setpoints of the first event.
Note: This step is not displayed for weekday/weekend
schedules.
15
61000762A 8800 Tstat Owners.indd 15
3/28/11 4:20:06 PM
PROGRAMMING
Changing program schedules (continued)
Press [Next], then [FAN] to set the fan mode of the
first event.
The thermostat will display the COPY option.
Press [Next] to advance to the next event.
Press [COPY] to copy the schedule of the day just
programmed to any other day.
Repeat above process for each remaining event.
OR
Press [DONE] to save the schedule for the day.
Press [CANCEL] to proceed to the next day and repeat
the above process.
16
61000762A 8800 Tstat Owners.indd 16
3/28/11 4:20:07 PM
PROGRAMMING
Program schedule holds – temporary
Temporary program hold
Press
or
to immediately adjust the temperature
when the schedule is running. This will temporarily hold
the temperature setting until the next scheduled event.
Press
or
to adjust the end time of the hold. If
end time is not adjusted, the Temporary Hold will end at
the start of the next event.
To cancel the Temporary Hold, press [CANCEL HOLD].
17
61000762A 8800 Tstat Owners.indd 17
3/28/11 4:20:07 PM
PROGRAMMING
Program schedule holds – permanent
Program schedule holds – VACATION
Permanent program hold
Vacation program hold
Press [HOLD] to permanently hold the temperature at
its current setting while the schedule is running. This
will override the temperature settings for all events.
With the thermostat in Permanent Hold, the temperature
setting and fan mode can be adjusted and will stay at
that setting until the hold is cancelled.
This energy saving feature allows you to suspend the
programmed schedule for extended periods of time. The
temperature you select will be maintained 24 hours a
day until the vacation program hold end date and time.
Once the end date and time have been surpassed, the
previously programmed schedule will resume. If you
return earlier than expected, press [CANCEL HOLD] to
resume the programmed schedule.
Press [MENU] to enter
the main menu.
Press [SET VACATION]
to enter vacation
program hold.
To cancel the Permanent Hold, press [CANCEL HOLD].
Press
or
to adjust the
temperature setting.
18
61000762A 8800 Tstat Owners.indd 18
3/28/11 4:20:08 PM
PROGRAMMING
Program schedule holds – vacation (continued)
Vacation program hold (continued)
Press [Next], then
or
to set end date.
Press [Next], then
or
to set end time.
Press [Next], then [FAN] to set the fan mode.
Press [DONE] to save and exit, or [CANCEL] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 20 seconds.
19
61000762A 8800 Tstat Owners.indd 19
3/28/11 4:20:09 PM
SETUP MENU
How to enter the setup menu to change settings
Press [MENU] to enter the main menu.
Press [SETUP] to enter the setup menu.
Press
flashes.)
or
to adjust the setting. (Selected option
Press [DONE] to save and exit, or [CANCEL] to exit
without saving.
The thermostat will discard changes and exit if nothing
is pressed within 60 seconds.
Press [Next] or [Back] to page through the settings
(the setting is displayed in the message center).
MESSAGE CENTER
(SCROLLING TEXT)
20
61000762A 8800 Tstat Owners.indd 20
3/28/11 4:20:09 PM
SETUP MENU
User system settings table
The following table is the list of the settings and their details. Default settings are shown in bold.
System setting
Description
Factory default setting (bold) and setting range
HUMIDISTAT MODE
(only available if controller type
is set to humidistat)
HUMIDIFY
DEHUMIDIFY
AUTO
OFF
TEMPERATURE SCALE
Set the thermostat to Fahrenheit
or Celsius mode
FAHRENHEIT
CELSIUS
AUTO DAYLIGHT
SAVINGS
Enable or disable auto daylight
savings
MARCH – Second Sunday in March to the first Sunday
in November
APRIL – First Sunday in April to the last Sunday in October
OFF
BACKLIGHT INTENSITY
Backlight intensity as a
percentage of full on
100 PERCENT
Selection of 0 – 100%
EVENTS PER DAY
Number of program events
per day
FOUR EVENTS PER DAY
TWO EVENTS PER DAY
SECURITY
Enable PIN code security feature
(only available if enabled in
installer setup)
DISABLED
ENABLED
SECURITY PIN
Sets security PIN code. The
thermostat can also be accessed
with the master PIN 7777 (only
available if Security is enabled)
####
4-digit numeric PIN
21
61000762A 8800 Tstat Owners.indd 21
3/28/11 4:20:09 PM
SETUP MENU
User system settings table (continued)
System setting
Description
Factory default setting (bold) and setting range
LOCKOUT TYPE
Level of lockout (only
available if Security is
enabled)
OFF: No lockout
PARTIAL lockout
FULL lockout
MODE LOCKOUT
System mode lockout
setting (only available in
partial lockout)
OFF: No lockout
FULL: no system mode changes allowed
FAN LOCKOUT
Fan mode lockout setting
(only available in partial
lockout)
OFF: No lockout
TIMED: changes revert after temporary change period
FULL: no fan mode changes allowed
SETPOINT LOCKOUT
Setpoint lockout setting
(only available in partial
lockout)
OFF: No lockout
TIME-LIMITED: changes revert after temporary change period
RANGE-LIMITED: set by max setpoint lockout
TIME AND RANGE: set by max setpoint lockout and temporary change period
FULL: no setpoint changes allowed
MAX SETPOINT
CHANGE IN LOCKOUT
Setpoint range limit
for temperature and
humidity adjustments
(only available in partial
lockout)
±5° F or C, ±5% RH
OFF to ±20° F or C, OFF to ±20% RH
TEMPORARY CHANGE
PERIOD
Time-limited lockout
temporary change period
(only available in partial
lockout)
60 MINUTES
0 to 255 MINUTES
22
61000762A 8800 Tstat Owners.indd 22
3/28/11 4:20:09 PM
THERMOSTAT FIVE YEAR LIMITED WARRANTY
Your Research Products Corporation Aprilaire® Thermostat unit is expressly warranted for five (5) years from date of installation to be free from
defects in materials or workmanship.
Research Products Corporation’s exclusive obligation under this warranty shall be to supply, without charge, a replacement for any thermostat
which is found to be defective within such five (5) year period and which is returned, together with the date of installation, no later than thirty (30)
days after said five (5) year period by you to either your original supplier or to Research Products Corporation, Madison, Wisconsin 53701.
THIS WARRANTY SHALL NOT OBLIGATE RESEARCH PRODUCTS CORPORATION FOR ANY LABOR COSTS AND SHALL NOT APPLY TO DEFECTS IN
WORKMANSHIP OR MATERIALS FURNISHED BY YOUR INSTALLER AS CONTRASTED TO DEFECTS IN THE THERMOSTAT ITSELF.
IMPLIED WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE AFORESAID
FIVE YEAR PERIOD. RESEARCH PRODUCTS CORPORATION’S LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OTHER THAN
DAMAGES FOR PERSONAL INJURIES, RESULTING FROM ANY BREACH OF THE AFORESAID IMPLIED WARRANTIES OR THE ABOVE LIMITED
WARRANTY IS EXPRESSLY EXCLUDED. THIS LIMITED WARRANTY IS VOID IF DEFECT(S) RESULT FROM FAILURE TO HAVE THIS THERMOSTAT
INSTALLED BY A QUALIFIED HEATING AND AIR CONDITIONING CONTRACTOR. IF THE LIMITED WARRANTY IS VOID DUE TO FAILURE TO USE A
QUALIFIED CONTRACTOR, ALL DISCLAIMERS OF IMPLIED WARRANTIES SHALL BE EFFECTIVE UPON INSTALLATION.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,
so the above exclusions or limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
This equipment if installed in strict accordance with the manufacturer’s instructions, complies with the limits for a Class B computing device
pursuant to Subpart J of Part 15 of FCC Rules.
Warranty Registration
Please…Take a few minutes to visit us on-line at www.aprilaire.com to register your Aprilaire product.
If you do not have on-line access, please mail a postcard with your name, address, phone number, product purchased
and date of purchase to: Research Products Corporation, P.O. BOX 1467, Madison, WI 53701
Your Warranty Registration information will not be sold or shared outside of this company.
23
61000762A 8800 Tstat Owners.indd 23
3/28/11 4:20:10 PM
P.O. Box 1467 • Madison, WI 53701-1467 • Phone: 800/334-6011 • Fax: 608/257-4357
www.aprilaire.com
61000762 3.11
B2205383A
61000762A 8800 Tstat Owners.indd 24
© 2011 Aprilaire – A division of Research Products Corporation
3/28/11 4:20:10 PM
Download PDF

advertising