Operating instructions | Arcam AV8 Home Theater System User Manual

MULTI PLAYER
CDJ-850
http://www.prodjnet.com/support/
The Pioneer website listed above provides answers to frequently asked questions, information about
software, and other up-to-date data of assistance to our customers.
http://www.prodjnet.com/rekordbox/support/
For inquiries on rekordbox, please see the support site indicated above.
Operating Instructions
DRB1526-A
1
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings.
However the method of connecting and operating the unit is the same.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
D3-4-2-1-1_A1_En
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
P1-4-2-2_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
2
En
DRB1526-A
2
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
Before plugging in for the first time, read the following
section carefully.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the rear panel.
D3-4-2-1-4*_A1_En
CAUTION
The  switch on this unit will not completely shut off
all power from the AC outlet. Since the power cord
serves as the main disconnect device for the unit,
you will need to unplug it from the AC outlet to shut
down all power. Therefore, make sure the unit has
been installed so that the power cord can be easily
unplugged from the AC outlet in case of an accident.
To avoid fire hazard, the power cord should also be
unplugged from the AC outlet when left unused for a
long period of time (for example, when on vacation).
D3-4-2-2-2a*_A1_En
NOTE
THE NO USER-SERVICEABLE PARTS
COMPARTMENT WARNING IS LOCATED ON THE
APPLIANCE BOTTOM.
D3-7-13-68_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
This Class B digital apparatus complies with
Canadian ICES-003.
D8-10-1-3_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 5 cm at rear, and 5 cm at each side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
vacation).
D3-4-2-2-1a_A1_En
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.
D8-10-2_A1_En
CAUTION
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic
interference with electric appliances such as radios
and televisions, use shielded cables and connectors
for connections.
D8-10-3a_A1_En
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON PAGE 31 FOR
D36-AP9-1_A1_En_PSV
FUTURE REFERENCE.
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product may expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
Wash hands after handling.
D36-P5_B1_En
When using this product, confirm the safety
information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
En
DRB1526-A
3
3
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
CLASS 1 LASER PRODUCT
D58-5-2-2a_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Product Name: MULTI PLAYER
Model Number: CDJ-850
Responsible Party Name: PIONEER ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.
Phone: 1-800-421-1404
URL: http://www.pioneerelectronics.com
D8-10-4*_C1_En
We Want You Listening For A Lifetime
Selecting fine audio equipment such as the unit
you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how
you can maximize the fun and excitement your
equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without
annoying blaring or distortion-and, most importantly,
without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing
“comfort level” adapts to higher volumes of sound.
So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by
setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, and without distortion.
Once you have established a comfortable sound
level:
• Set the dial and leave it there.
Used wisely, your new sound equipment will
provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often
undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of
sound levels is included for your protection.
Decibel
Level Example
30
40
50
60
70
80
Quiet library, soft whispers
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock
at two feet.
THE FOLLOWING NOISES CAN BE DANGEROUS
UNDER CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers,
thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
Taking a minute to do this now will help to prevent
hearing damage or loss in the future. After all, we
want you listening for a lifetime.
4
S001_A1_En
En
DRB1526-A
4
Contents
How to read this manual
The names of displays, menus, and buttons in this manual are
enclosed in brackets. (e.g. [MASTER] channel, [ON/OFF], [File] menu)
! The Operating Instructions of rekordbox can be viewed from the
rekordbox [Help] menu after installing rekordbox.
Before start
Features........................................................................................................6
Before you start
What’s in the box..........................................................................................7
Supported sources.......................................................................................7
Usable discs and USB devices...................................................................7
Playable music file formats.........................................................................8
Functions usable in combination with a computer..................................9
About the rekordbox music management software...............................10
About the driver software (Windows).......................................................11
Part names and functions
Control panel..............................................................................................13
Rear panel...................................................................................................14
Front panel..................................................................................................14
Main unit display........................................................................................15
Jog dial display section.............................................................................15
Connections
Basic style...................................................................................................16
Operations
Setting the source to be played................................................................17
Using the [BROWSE] button....................................................................17
Using the [TAG LIST] button......................................................................18
Using the [INFO] button............................................................................19
Playback......................................................................................................20
Setting Cue.................................................................................................20
Setting Loop................................................................................................21
Storing cue and loop points......................................................................22
Adjusting the playing speed (Tempo control).........................................23
Operating the jog dial................................................................................23
Operations in combination with a DJ mixer............................................24
Using the DJ software...............................................................................24
Changing the settings...............................................................................24
Additional information
Troubleshooting.........................................................................................26
Error messages..........................................................................................27
List of MIDI Messages...............................................................................27
List of icons displayed on the main unit display section.........................28
Cautions on use.........................................................................................28
Handling discs...........................................................................................28
Disclaimer...................................................................................................28
Cautions on copyrights.............................................................................29
Using the support site...............................................................................29
Specifications.............................................................................................29
En
DRB1526-A
5
5
Before start
Features
This unit is a DJ player that carries over the technology of the Pioneer CDJ series, the world standard in club players. It is a multi player for DJs
supporting a variety of sources, enabling full-fledged DJ play easily.
MULTI MEDIA, MULTI FORMAT
This unit can play not only music CDs (CD-DA), but also music files (MP3, AAC, WAV and AIFF) recorded on mass storage class USB devices
(flash memory devices and hard discs) and CD-R/-RW discs. It can also be used as DJ software controller and audio interface.
rekordboxTM
rekordbox, a music management software application exclusively for Pioneer DJ players, is included. It allows music files on a computer to be
managed in a variety of ways (analysis, setting, creation, storage of playback history, etc.). Also, music files managed with rekordbox can be
transferred to USB devices for convenience in selecting tracks, operating playlists and so on when the USB device is connected to this unit.
USB Export
This function can be used to transfer rekordbox music files and management data using USB devices. This eliminates the need to take your computer to the disco or club.
At home/In a studio
At the disco/club
Computer
Load music files onto
the computer from the
Internet or discs.
rekordbox
- Add to and analyze the
collection.
- Prepare with rekordbox.
Check and manage
the playing history
with rekordbox.
Write the rekordbox
data onto a USB
device.
The playing history is
stored on the USB
device.
Play using the rekordbox data.
Load the USB device
into the DJ player.
DJ player
DISPLAY
The combination of a GUI displaying music file information in easily understandable fashion and a rotary selector with easy operation lets you
select tracks with no stress.
WAVE DISPLAY
This unit is equipped with a 100 x 7 dot WAVE display.
TAG LIST
In addition to playlists prepared using rekordbox, tracks to be played next can be temporarily collected inside the CDJ-850. The music files added
to the tag list can be displayed as a list. This function is extremely convenient for selecting tracks during live performances.
KEYWORD SEARCH
Keyword searching, letter jumping and other functions let you quickly and precisely search for the desired music file.
HISTORY MEMORY
The CDJ-850 is equipped with a history function storing the playing history of music files. Playlists can be created from this playing history using
rekordbox.
6
En
DRB1526-A
6
Before you start
Supported sources
!
!
!
!
!
!
This unit supports the sources listed below.
! Discs (page 7)
! USB devices (page 8)
! Computers (page 9)
Install the software onto the computer from the included CD-ROM.
The included CD-ROM contains the following two software
programs.
— rekordbox music management software
— Driver software
CD-ROM (rekordbox license key attached)
Power cord
Audio cable
Control cord
Disc force eject pin (mounted on bottom of product)
Operating instructions (this document)
Before you start
What’s in the box
Usable discs and USB devices
About discs
This unit can play the discs shown below.
Type
Mark
1
CD
Compatible formats
!
Music CD (CD-DA)
Music files (MP3/AAC/WAV/AIFF) recorded on CD-R/-RW discs can
be played.
Folder layers
Max. 8 levels (files in folders beyond the 8th level cannot
be played)
Max. number of
folders
1 000 folders
Max. number of
files
1 000 files
When there are many folders or files, some time may be required for loading.
CD-R
!
!
!
!
!
Music CD (CD-DA)
MP3
AAC
WAV
AIFF
CD-RW
CD-TEXT 2
About CD-R/-RW discs
Music CD (CD-DA)
1 Discs on which the marks on this table are indicated on the disc label, package or jacket can be played.
2 Titles, album names and artist names recorded in the CD-Text data are
displayed. When multiple text data are recorded on the disc, the information
for the first text data is displayed.
About discs created on computers
Depending on the application settings and the computer’s environmental settings, it may not be possible to play certain discs. Record
the disc in a format supported on this unit. For details, contact your
application’s retailer.
If the recording quality is poor due to the disc’s properties, scratches
or dirt on the disc or dirt on the recording lens, it may not be possible
to play the disc.
Creating backup discs
When CD-R/-RW discs are paused or left in the pause mode at cue
points for long periods of time, it may become difficult to play the disc
at that point, due to the properties of the disc. Also, when a specific
point is looped repeatedly an extremely large number of times, it may
become difficult to play that point.
When playing valuable discs, we recommend making backup discs.
About Copy Control CDs and DualDiscs
Discs that cannot be played
!
!
!
!
!
!
DTS-CD
Photo CDs
Video CDs
CD Graphics (CD-G) discs
Unfinalized CDs
DVD
This unit is designed to CD standards. Operation and performance of
discs with standards other than CD standards is not guaranteed.
About 8 cm single CDs
8 cm single CDs cannot be played on the CDJ-850. Do not mount 8 cm
adapters on CDs and play them on the CDJ-850. The adapter could fall
off as the disc spins, damaging the disc or the player.
En
DRB1526-A
7
7
About USB devices
Cautions on using USB devices
This unit supports USB mass storage class USB devices (external
hard disks, portable flash memory devices, digital audio players, etc.).
Folder layers
Max. 8 layers
Max. number of
folders
1 000 folders
Max. number of
files
10 000 files (1 000 files for files not managed by rekordbox)
Supported file
systems
FAT16, FAT32 and HFS+ (NTFS is not supported.)
! Some USB devices may not operate properly. Please note that
Pioneer will accept no responsibility whatsoever for loss of data
recorded on USB devices.
! It may happen that, when a current above the allowable level is
detected in this unit’s USB port, the [USB STOP] indicator flashes,
the power supply to the USB device is cut off and communications
with the USB device are interrupted. To restore normal operation,
disconnect the USB device from this unit. Avoid reusing USB
devices for which an excess current has been detected. If normal
operation is not restored (if communications cannot be established) after the above procedure is performed, try turning off this
unit’s power then turning it back on.
! If multiple partitions are set for the USB device, the device may not
be recognized.
! USB devices equipped with flash card readers may not operate.
! Depending on the USB device you are using, the desired performance may not be achieved.
When there are many folders or files, some time may be required for loading.
Folders and files exceeding the limits cannot be displayed.
USB devices that cannot be used
! Optical disk type devices such as external DVD/CD drives, etc., are
not supported.
! USB hubs cannot be used.
Playable music file formats
This unit supports music files in the formats shown below.
8
Type
File extension
Compatible
formats
Bit depth
Bit rate
Sampling frequency
Encoding
method
MP3
.mp3
MPEG-1
16 bit
32 kbps to 320 kbps
32 kHz, 44.1 kHz, 48 kHz
CBR, VBR
AAC
.m4a, .aac and .mp4
MPEG-4 AAC LC
16 bit
16 kbps to 320 kbps
32 kHz, 44.1 kHz, 48 kHz
CBR, VBR
WAV
.wav
WAV
16 bit, 24 bit
—
44.1 kHz, 48 kHz
Uncompressed PCM
AIFF
.aif, .aiff
AIFF
16 bit, 24 bit
—
44.1 kHz, 48 kHz
Uncompressed PCM
About MP3 files
About AAC files
MP3 files can have a constant bit rate (CBR) or a variable bit rate
(VBR). Both types of files can be played on the CDJ-850, but the search
and super fast search functions are slower with VBR files. If your priority is operability, we recommend recording MP3 files in CBR.
! AAC is the abbreviation of “Advanced Audio Coding”, a basic
format of audio compression technology used for MPEG-2 and
MPEG-4.
! The file format and extension of AAC data depends on the application used to create the data.
! In addition to AAC files with the extension “.m4a” encoded with
iTunes®, files with the extensions “.aac” and “.mp4” can also be
played. Note, however, that copyright-protected AAC files purchased for example at the iTunes Music Store cannot be played.
Also, some files may not be playable, depending on the version of
iTunes used for encoding.
En
DRB1526-A
8
Functions usable in combination
with a computer
This unit can be used in combination with a computer when the software is installed onto the computer from the included CD-ROM.
The included CD-ROM contains the following two software programs.
rekordbox music management software
Music files used for DJ play can be managed. The management information can be transferred using USB devices (page 10).
Driver software
When operating DJ software on the computer using this unit, the
sound of the music file that is playing can be output from this unit
(page 11).
! There is no need to install the driver software when using Mac OS X.
Software end user license agreement
This Software End User License Agreement (“Agreement”) is between
you (both the individual installing the Program and any single
legal entity for which the individual is acting) (“You” or “Your”) and
PIONEER CORPORATION (“Pioneer”).
TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS
THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT.
PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS
EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS.
WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE
THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT
AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT
AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT
OR UNINSTALL IT, AS APPLICABLE.
1 Definitions
1 “Documentation” means written documentation, specifications and help content made generally available by Pioneer to
aid in installing and using the Program.
2 “Program” means all or any part of Pioneer’s software
licensed to You by Pioneer under this Agreement.
2 Program license
1 Limited License. Subject to this Agreement’s restrictions,
Pioneer grants to You a limited, non-exclusive, nontransferable, license (without the right to sublicense):
a To install a single copy of the Program on the hard disk
drive of Your computer, to use the Program only for Your
personal purpose complying with this Agreement and the
Documentation (“Authorized Use”);
b To use the Documentation in support of Your Authorized
Use; and
c To make one copy of the Program solely for backup purposes, provided that all titles and trademark, copyright and
restricted rights notices are reproduced on the copy.
2 Restrictions. You will not copy or use the Program or
Documentation except as expressly permitted by this
Agreement. You will not transfer, sublicense, rent, lease or
lend the Program, or use it for third-party training, commercial
time-sharing or service bureau use. You will not Yourself or
through any third party modify, reverse engineer, disassemble
or decompile the Program, except to the extent expressly permitted by applicable law, and then only after You have notified
Pioneer in writing of Your intended activities. You will not use
the Program on multiple processors without Pioneer’s prior
written consent.
3 Ownership. Pioneer or its licensor retains all right, title and
interest in and to all patent, copyright, trademark, trade secret
and other intellectual property rights in the Program and
3 Warranty disclaimer
THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS”
WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU
AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST
EXTENT PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS
ALL WARRANTIES OF ANY KIND WITH RESPECT TO THE
PROGRAM AND DOCUMENTATION, WHETHER EXPRESS, IMPLIED,
STATUTORY, OR ARISING OUT OF COURSE OF PERFORMANCE,
COURSE OF DEALING OR USAGE OF TRADE, INCLUDING
ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, SATISFACTORY QUALITY, ACCURACY,
TITLE OR NON-INFRINGEMENT.
Before you start
About the included CD-ROM
Documentation, and any derivative works thereof. You do not
acquire any other rights, express or implied, beyond the limited license set forth in this Agreement.
4 No Support. Pioneer has no obligation to provide support,
maintenance, upgrades, modifications or new releases for the
Program or Documentation under this Agreement.
4 Damages and remedies for breach
You agree that any breach of this Agreement’s restrictions would
cause Pioneer irreparable harm for which money damages alone
would be inadequate. In addition to damages and any other remedies
to which Pioneer may be entitled, You agree that Pioneer may seek
injunctive relief to prevent the actual, threatened or continued breach
of this Agreement.
5 Termination
Pioneer may terminate this Agreement at any time upon Your breach
of any provision. If this Agreement is terminated, You will stop using
the Program, permanently delete it from the computer where it
resides, and destroy all copies of the Program and Documentation in
Your possession, confirming to Pioneer in writing that You have done
so. Sections 2.2, 2.3, 2.4, 3, 4, 5 and 6 will continue in effect after this
Agreement’s termination.
6 General terms
1 Limitation of Liability. In no event will Pioneer or its subsidiaries be liable in connection with this Agreement or its subject
matter, under any theory of liability, for any indirect, incidental, special, consequential or punitive damages, or damages
for lost profits, revenue, business, savings, data, use, or cost
of substitute procurement, even if advised of the possibility of
such damages or if such damages are foreseeable. In no event
will Pioneer’s liability for all damages exceed the amounts
actually paid by You to Pioneer or its subsidiaries for the
Program. The parties acknowledge that the liability limits and
risk allocation in this Agreement are reflected in the Program
price and are essential elements of the bargain between the
parties, without which Pioneer would not have provided the
Program or entered into this Agreement.
2 The limitations or exclusions of warranties and liability
contained in this Agreement do not affect or prejudice Your
statutory rights as consumer and shall apply to You only to the
extent such limitations or exclusions are permitted under the
laws of the jurisdiction where You are located.
3 Severability and Waiver. If any provision of this Agreement is
held to be illegal, invalid or otherwise unenforceable, that provision will be enforced to the extent possible or, if incapable
of enforcement, deemed to be severed and deleted from this
Agreement, and the remainder will continue in full force and
effect. The waiver by either party of any default or breach of
this Agreement will not waive any other or subsequent default
or breach.
4 No Assignment. You may not assign, sell, transfer, delegate or
otherwise dispose of this Agreement or any rights or obligations under it, whether voluntarily or involuntarily, by operation of law or otherwise, without Pioneer’s prior written consent. Any purported assignment, transfer or delegation by You
will be null and void. Subject to the foregoing, this Agreement
will be binding upon and will inure to the benefit of the parties
and their respective successors and assigns.
5 Entire Agreement. This Agreement constitutes the entire
agreement between the parties and supersedes all prior or
contemporaneous agreements or representations, whether
En
DRB1526-A
9
9
written or oral, concerning its subject matter. This Agreement
may not be modified or amended without Pioneer’s prior and
express written consent, and no other act, document, usage or
custom will be deemed to amend or modify this Agreement.
6 You agree that this Agreement shall be governed and construed by and under the laws of Japan.
Cautions on installing the software
Read Software end user license agreement carefully before installing
rekordbox and the driver software.
! The included CD-ROM contains installation programs in the following 12 languages.
English, French, German, Italian, Dutch, Spanish, Portuguese,
Russian, Chinese (simplified characters), Chinese (traditional
characters), Korean, Japanese.
! When using rekordbox with an operating system in a different
language, follow the instructions on the screen to select [English].
Supported operating systems
1
Mac OS X (10.4.6 and later)
Windows® 7 Home Premium/Professional/
Ultimate
®
Windows Vista
Home Basic/Home Premium/Business/Ultimate
rekordbox
32-bit version
1
64-bit version
1
32-bit version
1
64-bit version
1
32-bit version
1
Driver
software
1
1
1
2
1
1
2
®
Windows XP Home edition/Professional (SP2
and later)
1
1 There is no need to install the driver software when using Mac OS X.
2 When using a 64-bit version of Windows, the driver software can only be
used for 32-bit applications.
About the rekordbox music
management software
rekordbox is a software program for purchasers of the CDJ-850 or
other Pioneer DJ players to manage the music files they use for DJ
play.
— rekordbox may be used for classifying and searching for
music files stored on your computer as well as creating playlists, all of which can help improve your DJ performance.
— rekordbox allows the detecting, measuring, and editing of
beats, tempos (BPM), and other elements of your music files
prior to a performance.
Installing rekordbox
About the installation procedure (Macintosh)
Read Cautions on installing the software carefully before installing
rekordbox.
! Authorization of the computer’s administrator is required to install
and uninstall rekordbox.
Log on as the user which was set as the computer’s administrator
before installing.
1 When the included CD-ROM is inserted into the
computer’s CD drive, the CD drive opens on the screen.
Double-click the [CD_menu.app] icon.
! If the CD drive does not open on the screen when the CD-ROM is
inserted, use Finder to open the CD drive, then double-click the
[CD_menu.app] icon.
<[CD.menu.app] icon>
Minimum operating environment for rekordbox
! CPU:
— For Mac OS X, Macintosh computer equipped with a 1.83 GHz
or greater Intel® Core™Duo (or compatible) processor
— For Windows® 7, Windows Vista® and Windows® XP, PC/AT
compatible computer equipped with a 2 GHz or greater Intel®
Pentium® 4 (or compatible) processor
! Required memory: 1 GB or more of RAM
! Hard disc: 250 MB or more of free space (not including space for
storing music files, etc.)
! CD drive: Optical disc drive on which the CD-ROM can be read
! Sound: Audio output to speakers, headphones, etc. (internal or
external audio device)
! Internet connection: For user registration and inquiries, use a web
browser supporting 128-bit SSL (Safari 2.0 or greater, Internet
Explorer® 6.0 or greater, etc.).
! USB port: A USB port for connection of a USB device (flash memory, hard disc, etc.) is required to transfer music files to the USB
device.
! Operation is not guaranteed on all computers, even those with the
operating environment described above.
! Even with the required memory capacity indicated for the
operating environment above, in the cases described below the
software may not provide full functionality and performance due
to lack of memory. In this case, take the necessary measures
to ensure sufficient free memory. We recommend adding extra
memory in order to achieve stable performance.
— When there are many tracks being managed in the rekordbox
library
— When resident programs and services are running
! Depending on the computer’s power settings, etc., the CPU
and hard disc processing capacity may be insufficient. When
using laptop computers in particular, always keep the AC power
connected and set the computer to maximum performance
conditions when using rekordbox.
! Note that problems may arise in the operation of rekordbox due to
other software being used together with it.
10
2 When the CD-ROM’s menu is displayed, select
[rekordbox: Install Music Management Software], then
click [Start].
<CD-ROM menu>
! To close the CD-ROM menu, click [Exit].
En
DRB1526-A
10
3 Install rekordbox following the instructions on the
screen.
1 Insert the included CD-ROM into the computer’s CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is
inserted, open the CD drive from [Computer (or My Computer)] in
the [START] menu, then double-click the [CD_menu.exe] icon.
2 When the CD-ROM’s menu is displayed, select
[rekordbox: Install Music Management Software], then
click [Start].
<CD-ROM menu>
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer. To use the CDJ-850 connected to a computer on which Windows is installed, install the driver software on the
computer beforehand.
Installing the driver software
Before you start
About the installation procedure (Windows)
Read Cautions on installing the software carefully before installing
rekordbox.
! Authorization of the computer’s administrator is required to install
and uninstall rekordbox.
Log on as the user registered as the computer’s administrator
before installing rekordbox.
About the driver software
(Windows)
Before installing the driver software
! Read Cautions on installing the software on page 10 carefully.
! Turn off this unit’s power switch, then disconnect the USB cable
connecting this unit and the computer.
! If any other programs are running on the computer, quit them.
! To install or uninstall the driver software, you need to be authorized by the administrator of your computer. Log on as the administrator of your computer before proceeding with the installation.
! If you connect this unit to your computer without installing the
driver software first, an error may occur on your computer depending on the system environment.
! If installation of the driver software is interrupted after it has
started, start the installation procedure over again from the
beginning.
1 Insert the included CD-ROM into the computer’s CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is
inserted, open the CD drive from [Computer (or My Computer)] in
the [START] menu, then double-click the [CD_menu.exe] icon.
2 When the CD-ROM menu appears, select [Install
Driver Software (Pioneer_CDJ_Driver)], then click [Start].
! To close the CD-ROM menu, click [Exit].
3 Install rekordbox following the instructions on the
screen.
! Click [Cancel] to cancel installation after it has started.
Launching rekordbox
Log on as the user which was set as the computer’s administrator
before using rekordbox.
! When rekordbox is started up for the first time, the license key
must be input. The license key is affixed to the CD-ROM package.
! When rekordbox is started up, the operating instructions can be
viewed from the rekordbox [Help] menu.
For Mac OS X
Open the [Application] folder with Finder, then doubleclick [rekordbox 1.x.x.app].
! The 1.x.x indicates the rekordbox version.
For Windows® 7, Windows Vista® and Windows® XP
Click on the Windows [START] menu button, then [All
Programs] > [Pioneer] > [rekordbox 1.x.x] > [rekordbox
1.x.x].
! The 1.x.x indicates the rekordbox version.
! To close the CD-ROM menu, click [Exit].
3 Proceed with installation according to the
instructions on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
! When installing on Windows XP
If [Hardware Installation] appears on the screen while the installation is in progress, click [Continue Anyway] and continue with
the installation.
! When the installation program is completed, a completion message appears.
Connecting the CDJ-850 and computer
1 Connect this unit to your computer via a USB cable.
For instructions on connecting, see Using DJ software on page 16.
En
DRB1526-A
11
11
2 Press [u] C.
Turn on the power of this unit.
3 Press [PC] g.
The [CONNECTED] screen appears on the main unit display.
! The message [Installing device driver software] may appear
when the CDJ-850 is connected to the computer for the first time or
when it is reconnected to the computer’s USB port. Wait until the
[Your devices are ready for use] message appears.
! When installing on Windows XP
— [Can Windows connect to Windows Update to search for
software?] may appear while the installation is in progress.
Select [No, not this time] and click [Next] to continue with
the installation.
— [What do you want the wizard to do?] may appear while the
installation is in progress. Select [Install the software automatically (Recommended)] and click [Next] to continue with
the installation.
— If [Hardware Installation] appears on the screen while the
installation is in progress, click [Continue Anyway] and continue with the installation.
Checking the version of the driver
software
Click Windows [START] menu >[All Programs]>[Pioneer]>
[Pioneer CDJ]>[Pioneer CDJ Version Display Utility].
Adjusting the buffer size
This unit functions as an audio device conforming to the ASIO
standards.
! If an application using this unit as the default audio device (DJ
software, etc.) is running, quit that application before adjusting the
buffer size.
Click Windows [START] menu >[All Programs]>[Pioneer]>
[Pioneer CDJ]>[Pioneer CDJ ASIO Settings Utility].
! You can check the firmware version of this unit on the screen.
! The firmware version is not displayed when the CDJ-850 is not connected to the computer or when the CDJ-850 and computer are not
properly communicating.
Checking the latest information on the
driver software
For the latest information on the driver software for exclusive use with
this unit, visit our website shown below.
http://www.prodjnet.com/support/
! A sufficiently large buffer size decreases the chance of sound
dropout (sound interruption) but increases audio signal transmission delay (latency).
12
En
DRB1526-A
12
Part names and functions
Control panel
Rear panel
e f g
hi j
l
m
TAG LIST
INFO
MENU
n
UTILITY
d
BROWSE
o
BACK
p
TAG TRACK
/REMOVE
STANDBY
PC
c
b
Part names and functions
k
q
DISC EJECT
USB
STOP
USB
r
DISC
1 /16
1/8
1
AUTO
CUE
IN / CUE
OUT
2
a
1/4
TIME
MODE
VINYL
SPEED ADJUST
LOOP
4
IN ADJUST
1/2
9
8
7
6
5
CUE / LOOP
RELOOP /EXIT
CALL
s
t
u
TOUCH / RELEASE
DELETE
MEMORY
C
v
D
E
OUT ADJUST
8
JOG MODE
AUTO
BEAT LOOP
VINYL
w
BEAT
SELECT
TEMPO
DIRECTION
6
10
16
WIDE
x
REV
USB
CONTROL
F
G
R
AUDIO OUT
L
MASTER
TEMPO
y
TRACK SEARCH
4
SEARCH
3
H
Front panel
z
2
0
CUE
PLAY / PAUSE
FWD
REV
1
TEMPO
MULTI PLAYER
B
A
Control panel
1 PLAY/PAUSE f (page 20)
Use this to play/pause tracks.
— During playback, the indicator lights.
— When in the pause mode, the indicator flashes.
2 CUE (page 20)
Use this to set and check cue points.
— When a cue point is set, the indicator lights.
— When in the pause mode, the indicator flashes.
3 SEARCH m, n (page 20)
The track is forwarded/reversed while the button is held in.
4 TRACK SEARCH o, p (page 20)
Use these to search for the beginnings of tracks.
5 DIRECTION REV (page 20)
Use this to turn reverse playback on and off.
6 RELOOP/EXIT (page 22)
Use this to return to loop playback (reloop) or cancel loop playback
(loop exit).
7 LOOP OUT (OUT ADJUST) (page 21)
Use this to set and fine-adjust the loop out point.
CDJ-850
I J
8 LOOP IN/CUE (IN ADJUST) (page 21)
Use this to set and fine-adjust the loop in point.
9 BEAT SELECT (page 22)
Use this to set the number of beats for auto beat loop playback.
a AUTO BEAT LOOP (1, 2, 4, 8) (page 22)
Use these to set the loop automatically according to the track’s
tempo (auto beat loop).
b USB STOP (page 17)
Press for at least 2 seconds before disconnecting the USB device.
c USB indicator (page 17)
This flashes when this unit is communicating with the USB device.
d USB device insertion slot (page 17)
Load the USB device here.
e DISC (page 20)
Press this to play the music files on a CD or CD-ROM.
f USB (page 20)
Press this to play the music files on a USB device.
g PC (page 24)
Press this to use DJ software.
h TIME MODE (AUTO CUE) (page 21)
En
DRB1526-A
13
13
— When pressed once, the main unit display’s time display mode
(remaining time display or elapsed time display) switches.
— When pressed for over 1 second, auto cue turns on and off.
i Main unit display (page 15)
j BROWSE (page 17)
Press this to display the [BROWSE] screen.
k TAG LIST (page 18)
Press this to display the [TAG LIST] screen.
l INFO (page 19)
Press this to display the [INFO] screen.
m MENU (UTILITY) (page 24)
— When pressed once, the menu screen is displayed.
— The [UTILITY] screen is displayed when this is pressed for over
1 second.
n BACK (page 18)
Be sure to use the included power cord.
E Kensington security slot
F USB (page 16)
Connect to a computer.
G CONTROL (page 16)
Connect the control cord (included) here.
H AUDIO OUT L/R (page 16)
Connect the audio cables (included) here.
Front panel
I Disc insertion slot
J Disc force eject pin insertion hole
— Press this once to return to the previous screen.
— Press for over 1 second to move to the top layer.
o TAG TRACK/REMOVE (page 18)
Use these to add and remove tracks from the tag list.
p Rotary selector (page 20)
— Turn the rotary selector to select tracks or folders.
— Press the rotary selector to enter.
q STANDBY indicator (page 25)
This lights when the auto standby function is activated.
r DISC EJECT h (page 17)
Use this to eject discs.
s CUE/LOOP CALLc/d (page 22)
Use these to call out cue and loop points stored on the USB device.
t DELETE (page 22)
Use this to delete cue and loop points stored on the USB device.
u MEMORY (page 22)
Use this to store cue and loop points on the USB device.
v VINYL SPEED ADJUST TOUCH/RELEASE (page 23)
Use this to adjust the speed at which playback slows down and stops
when the top of the jog dial is pressed and the speed at which normal
playback resumes when the top of the jog dial is released.
w VINYL (JOG MODE) (page 23)
Use this to switch the jog dial mode.
x TEMPO ±6, ±10, ±16, WIDE (page 23)
Use this to switch the playing speed adjustment range.
y MASTER TEMPO (page 23)
Use this to turn the master tempo function on and off.
z TEMPO (page 23)
Use this to adjust the track playing speed.
A Jog dial (page 23)
This can be used for such operations as scratching, pitch bending,
etc.
B Jog dial display section (page 15)
Rear panel
C u (power switch)
This switches this unit’s power between on and standby.
D AC IN (page 16)
Connect this to a power outlet.
Connect the power cord after all the connections between devices
have been completed.
14
En
DRB1526-A
14
Main unit display
8 9
a
b
c
d
Part names and functions
7
e
6
5
f
4
3
2
1
1 Playing address display
8 Track number
The track is displayed as a bar graph.
Turns off from the left side when the remaining time is displayed. The
entire graph flashes slowly when the remaining track time is under 30
seconds, then flashes quickly when the remaining track time is under
15 seconds.
This displays the track number.
It is not possible to display more than 100 tracks.
9 REMAIN
This lights when the time display is set to the remaining time.
a A. CUE (page 21)
2 CUE
The positions of currently set cue and loop points are displayed as
marks.
This lights when auto cue is set.
b M, S, F (time display)
“M” indicates minutes, “S” seconds, “F” frames.
There are 75 frames to a second.
3 MEMORY
Cue and loop points recorded on USB devices are displayed as
marks.
c % (playing speed display)
This indicates the percentage by which the playing speed is changed.
4 INFO (page 19)
This lights when the [INFO] screen is displayed.
d BPM
Displays BPM (Beats Per Minute) of the track currently being played.
5 TAG LIST (page 18)
This lights when the [TAG LIST] screen is displayed.
e MT
This lights when the master tempo is set.
6 BROWSE (page 17)
This lights when the [BROWSE] screen is displayed.
f WIDE, ±16, ±10, ±6
This indicates the range by which the playing speed can be adjusted.
7 Information display section
The characters that can be displayed are letters A to Z, numbers 0 to
9 and certain symbols. “?” is displayed for other characters.
Jog dial display section
3 Audio memory status display
1
2
3
4
5
This flashes when the audio memory is being written. It stops flashing, remaining lit, when writing is completed.
It may not be possible to perform the real time cue operation while
the audio memory is being written.
The display also flashes when there is not enough memory due to
scratch play.
4 Jog touch detection display
When the jog mode is set to VINYL, the top of the jog dial lights when
pressed.
5 VINYL
This lights when the jog mode is set to VINYL.
1 Operation display
This indicates the playing position, with one revolution equal to 135
frames. It turns during playback and stops in the pause mode.
2 Cue point display
En
DRB1526-A
15
15
Connections
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Refer to the operating instructions for the component to be connected.
Connect the power cord after all the connections between devices have been completed.
Be sure to use the included power cord.
Basic style
When connected to a Pioneer DJ mixer using the control cord (included), operations such as starting playback on this unit can be controlled
using the DJ mixer’s fader (page 24).
The fader start function can only be used when connected to a Pioneer DJ mixer.
Audio cable
Audio cable
Control cord
Control cord
R L
USB
DJ player
DJ mixer
Power cord
CONTROL
R
AUDIO OUT
L
Rear panel
To an AC outlet
Using the relay play function
Relay playback on two DJ players is possible when the [CONTROL] terminals on this unit and the other Pioneer DJ player are interconnected
using a control cord (page 24).
Audio cable
Audio cable
Control cord
R L
USB
DJ player
DJ mixer
Power cord
CONTROL
R
AUDIO OUT
L
Rear panel
To an AC outlet
Using DJ software
When connected to a computer by USB cable, the DJ software can be operated with this units (page 24).
The sound of music files playing on the computer can be output from this unit (page 11).
USB Cable
Other
brands of
DJ software
Audio cable
Computer
USB Cable
Audio cable
R L
USB
DJ player
16
DJ mixer
Power cord
CONTROL
R
AUDIO OUT
L
Rear panel
To an AC outlet
En
DRB1526-A
16
Operations
1 Press [u] C to turn this unit’s power off, then wait at
least 1 minute.
Setting the source to be played
ef
d
c
b
ij
k
l
m n
TAG LIST
INFO
MENU
UTILITY
BROWSE
o
BACK
p
TAG TRACK
/REMOVE
STANDBY
PC
DISC EJECT
USB
STOP
USB
r
1
1/8
2
TIME
MODE
AUTO
CUE
VINYL
SPEED ADJUST
2 Use the included disc force eject pin. (Do not use
anything else.)
Operations
DISC
1 /16
Never forcibly eject a disc directly after turning off the set’s power.
Doing so is dangerous for the reasons described below.
! The disc will still be spinning when ejected and could hit your
fingers, etc., causing injury.
! Also, the disc clamp will rotate in an unstable way, and the disc
could get scratched.
The included disc force eject pin is mounted on the CDJ-850’s bottom
panel. When the pin is inserted all the way into the insertion hole, the
disc is ejected 5 mm to 10 mm out of the disc insertion slot. Grasp the
disc with your fingers and pull it out.
I J
C
Loading discs
! Set the disc with the printed side facing up.
! Insert the disc horizontally into the disc insertion slot in the main
unit’s front panel.
! Do not load more than 1 disc.
! Do not force discs into the set’s disc insertion slot when the set’s
power is off. Doing so could damage the disc or the set.
! When the disc is being drawn in or ejected, do not apply any force
to the disc in the direction opposite its movement. Doing so could
damage the disc or the set.
1 Press [u] C.
Turn on the power of this unit.
2 Load the disc in the disc insertion slot I.
Playback starts.
! When auto cue is turned on, playback starts when
[PLAY/PAUSEf] is pressed. For details on the auto cue function,
see Setting auto cue on page 21.
Ejecting discs
Press [h DISC EJECT] r.
The disc is ejected from the disc insertion slot.
! If [DISC EJECT h] is pressed accidentally, press [PLAY/PAUSEf]
immediately to return to the status directly before [DISC EJECT h]
was pressed. (No sound is output during this time.)
About ejecting discs by force
! If the disc is not ejected when [DISC EJECT h] is pressed, the disc
can be ejected forcibly by inserting the disc force eject pin into the
disc force eject pin insertion hole on the main unit’s front panel.
! When forcibly ejecting a disc, be sure to do so following the procedure below.
Loading USB devices
Connect the USB device to the USB device insertion slot d.
The USB indicator lights.
Removing USB devices from the set
! Be sure to follow the procedure below when removing USB
devices from the set. Removing a USB device without following
this procedure could erase the set’s management data and make it
impossible to read the USB device.
! When turning the set’s power off, be sure to remove the USB device
first.
1 Press [USB STOP] b for at least 2 seconds.
The USB indicator turns off.
2 Disconnect the USB device.
Using the [BROWSE] button
When [BROWSE] is pressed, the contents of the medium loaded in this
unit are displayed on the information display section.
Browsing libraries and folders
This displays the loaded tracks, sorted in category or tree structure.
The display on the information display section differs according to
whether or not library information is recorded on the USB device.
— With library information d Library browsing: The music files are
displayed by the categories set in rekordbox (album, artist, etc.).
The category types can be changed in the Preferences (environmental settings) in rekordbox.
— Without library information d Folder browsing: The folders/tracks
on the medium are displayed with a tree structure.
Contents recorded on discs cannot be viewed in the library browse
mode.
1
2
Title 01
Title 02
Title 03
En
DRB1526-A
17
17
1
List of contents
The contents of the selected medium are displayed.
2
Cursor
Turn the rotary selector to move the cursor up and
down.
Title 01
Title 02
Title 03
Searching for tracks
Tracks on the medium loaded in this unit can be searched for using
the [SEARCH] categories.
! Tracks recorded on discs cannot be searched.
! Tracks recorded on media for which library browsing is not possible cannot be searched.
2 Turn the rotary selector p.
Select the page to which you want to move.
3 Press the rotary selector p.
The display moves to the selected page.
1 Press [BROWSE] j.
2 Turn the rotary selector p.
Select the [SEARCH] category.
3 Press the rotary selector p.
The display switches to the character input screen.
4 Use the rotary selector p to input characters.
5 Select u then press the rotary selector p.
Only the tracks including the character you have input are displayed.
! When more characters are input, only the tracks including the
character string you have input are displayed.
! When [BACK] is pressed, the character that was just input is
deleted. If no character has been input, the category screen
reappears.
Using the jump function
The jump function can be used to instantaneously move to the track,
category or folder you want to play.
The jump function includes the two modes below.
! Letter jumping: Use this when the tracks are arranged or sorted in
alphabetical order.
! Page jumping: Use this when the tracks are not arranged or sorted
in alphabetical order. Turn the rotary selector to jump by page.
In the letter jump mode
1 Press the rotary selector p for over 1 second.
The letter jump mode is set. The first letter of the selected track is
displayed at the top left.
! The characters displayed in the letter jump mode are letters A to Z,
numbers 0 to 9 and certain symbols.
T
Title 01
Title 02
Title 03
2 Turn the rotary selector p.
Select the character to which you want to move.
About the playback history (HISTORY)
When tracks being managed by rekordbox are played, the playback
history is recorded in the [HISTORY] category.
A new playback history is created each time the power is turned on/off
or a USB device is connected/disconnected.
The maximum number of tracks that can be recorded in a single playback history is 999.
! Tracks are recorded in the playback history if they are played for at
least 60 seconds.
! The playback history is recorded on the USB device.
! The playback history is not recorded if there is not enough free
space on the USB device or if the USB device is write-protected.
! Playlists can be made based on the playback history using rekordbox. For details, see the rekordbox operating instructions.
! When a playback history is stored as a playlist using rekordbox,
the playback history is deleted.
1 Load an SD memory card/USB device in the CDJ-850.
2 Play tracks.
The track being played is recorded and displayed in the playback
history.
Deleting the playback history
1 With the contents of the [HISTORY] category
displayed, press [MENU (UTILITY)] m.
The delete menu is displayed.
2 Turn rotary selector p then press it.
Select the range to be deleted.
! [DELETE]: The playback history selected with the cursor is
deleted.
! [ALL DELETE]: All playback histories are deleted.
3 Turn rotary selector p then press it.
! [CANCEL]: The previous screen reappears.
! [OK]: The deletion is performed.
Using the [TAG LIST] button
Up to 1 000 tracks to be played next or tracks selected according to the
DJing situation can be collected ahead of time in the tag list.
1
3 Press the rotary selector p.
The display moves to the category starting with the selected character
or symbol.
01
02
03
In the page jump mode
1 Press the rotary selector p for over 1 second.
2
Title 01
Title 02
Title 03
The mode switches to the page jump mode.
18
1
List of contents
The contents of the tag list are displayed here.
2
Cursor
Turn the rotary selector to move the cursor up and
down.
En
DRB1526-A
18
Adding tracks to the tag list
Set the cursor to the track, then press [TAG TRACK/
REMOVE] o.
1 is displayed to the left of the track.
! Up to 1 000 tracks can be added to the tag list. If you attempt to add
more than 1 000 tracks, a warning message is displayed and the
tracks cannot be added.
! When [TAG TRACK/REMOVE] is pressed while the information is
displayed after pressing [INFO], the tracks loaded in this unit are
added to the tag list.
Changing the order of the tracks on the
tag list
1 Press [TAG LIST] k.
The tag list is displayed.
2 Set the cursor to the track whose order you want to
change, then press [MENU (UTILITY)] m.
The [LIST MENU] screen appears.
3 Turn the rotary selector p.
Select [CHANGE ORDER No].
Operations
Adding categories or folders to the tag list
4 Press the rotary selector p.
The track selected in step 2 flashes.
Set the cursor to the category or folder, then press
[TAG TRACK/REMOVE] o.
The category name/folder name flashes, and the tracks in that category/folder are added to the tag list.
! When a category/folder including tracks already added to the tag
list is selected and [TAG TRACK/REMOVE] is pressed, only the
tracks not already on the tag list are added.
! When folders are added while in the folder browse mode, track
names are registered as file names.
5 Turn the rotary selector p.
Select the position to which the track is to be moved.
6 Press the rotary selector p.
The track order changes.
Transforming the tag list into a playlist
Adding playlists to the tag list
1 Press [TAG LIST] k.
Set the cursor to the playlist, then press [TAG TRACK/
REMOVE] o.
2 Press [MENU (UTILITY)] m.
The playlist name flashes, and the tracks in that playlist are added to
the tag list.
! When a playlist including tracks that have already been added to
the tag list is selected and [TAG TRACK/REMOVE] is pressed, only
the tracks that were not previously added to the tag list are added.
Removing tracks from the tag list
1 Press [TAG LIST] k.
The tag list is displayed.
The [LIST MENU] screen appears.
3 Turn the rotary selector p.
Select [CREATE PLAYLIST].
4 Press the rotary selector p.
The [COMPLETE save as NEW PLAYLIST] screen appears and the tag
list is transformed into a playlist.
! Only tracks being managed with rekordbox can be transformed
into playlists.
The tag list cannot be transformed into a playlist if no library information is recorded on the USB device.
The tag list is displayed.
2 Set the cursor to the track you want to remove from
the tag list, then press [TAG TRACK/REMOVE] o for at
least 1 second.
The track is removed from the tag list.
! If a track that has been added to the tag list is removed from the
tag list while it is playing, the track is played to the end, then the
stop mode is set. The next track is not played.
! When a medium is removed from the CDJ-850, all the tracks
recorded on that medium are removed from the tag list.
Using the [INFO] button
The details of the tracks loaded in this unit can be checked by pressing [INFO] l while a track is playing.
1
2
Title 01
Artist 01
Removing all the tracks from the tag list
1 Press [TAG LIST] k.
The tag list is displayed.
1
Track details
The details of the tracks loaded in the DJ player
are displayed here.
2 Press [MENU (UTILITY)] m.
2
WAVE display
The WAVE display is shown here.
The [LIST MENU] screen appears.
3 Turn the rotary selector p.
Select [REMOVE ALL TRACKS].
4 Turn rotary selector p then press it.
! [CANCEL]: The previous screen reappears.
! [OK]: The deletion is performed.
En
DRB1526-A
19
19
Finding the beginnings of tracks (Track
Search)
Playback
ef
n
p
UTILITY
BROWSE
TAG LIST
INFO
BACK
MENU
Press [TRACK SEARCH o, p] 4.
TAG TRACK
/REMOVE
STANDBY
PC
DISC EJECT
USB
STOP
USB
DISC
1 /16
1
1/8
2
1/4
4
TIME
MODE
AUTO
CUE
IN / CUE
OUT
VINYL
SPEED ADJUST
IN ADJUST
1/2
RELOOP / EXIT
CUE / LOOP
LOOP
CALL
TOUCH / RELEASE
DELETE
MEMORY
OUT ADJUST
8
JOG MODE
AUTO
BEAT LOOP
VINYL
BEAT
SELECT
6
10
16
WIDE
REV
MASTER
TEMPO
TRACK SEARCH
4
SEARCH
3
2
Playing in reverse
TEMPO
DIRECTION
5
Press the [p] to move to the beginning of the next track.
When [o] is pressed, playback returns to the beginning of the currently playing track. When pressed twice in a row, playback returns to
the beginning of the previous track.
! When auto cue is turned on, the set searches for the beginning of
the track and pauses there (page 21).
0
CUE
PLAY / PAUSE
REV
FWD
1
TEMPO
MULTI PLAYER
CDJ-850
1 Load the source onto this unit.
2 Press either [USB] f or [DISC] e.
Press [DIRECTION REV] 5.
The [DIRECTION REV] indicator lights and the track is played in the
reverse direction.
! When the music files are recorded in a folder structure, only tracks
within the same category/folder can be played in reverse. Also note
that reverse playback may not start immediately.
! The direction in which the playing speed is increased or decreased
according to the direction in which the jog dial is turned is
reversed.
! When such operations as track searching and loop playback are
performed during reverse playback, the audio memory status display on the jog dial display section flashes and scratch play may
not be possible.
Setting Cue
This selects the source.
! If tracks are loaded from another source, a warning message is
displayed. After checking the message, press the rotary selector to
turn the message off and switch the source.
h
UTILITY
BROWSE
Pausing
MENU
BACK
TAG TRACK
/REMOVE
STANDBY
USB
DISC
1 /16
s
1
AUTO
CUE
TIME
MODE
1/8
2
1/4
4
VINYL
SPEED ADJUST
IN / CUE
8
7
6
5
OUT
RELOOP /EXIT
LOOP
IN ADJUST
1/2
CUE / LOOP
CALL
TOUCH / RELEASE
DELETE
MEMORY
OUT ADJUST
8
JOG MODE
AUTO
BEAT LOOP
VINYL
BEAT
SELECT
TEMPO
DIRECTION
6
10
16
WIDE
REV
MASTER
TEMPO
TRACK SEARCH
4
SEARCH
3
2
During playback, press [PLAY/PAUSEf] 1.
! Playback resumes when [PLAY/PAUSEf] is pressed again.
INFO
DISC EJECT
Select the track.
! To move to a lower layer in the folder or category, select the folder
then press the rotary selector.
! To return to a higher layer, press [BACK].
! Press [BACK] for more than 1 second to move to the top layer.
The track is loaded and playback begins.
! When a disc containing music files recorded with a hierarchical
structure is loaded, playback starts from the tracks in the uppermost level.
TAG LIST
p
PC
USB
STOP
3 Turn the rotary selector p.
4 Press the rotary selector p.
m
0
CUE
PLAY / PAUSE
FWD
REV
1
TEMPO
Resuming playback from the position playing
just before the disc was ejected (Resume)
After ejecting the disc, immediately reload that same disc
into this unit.
! The resume function only works when the same disc is ejected
then reloaded before loading another disc.
! The resume function does not work for USB devices.
Forward and reverse scanning
MULTI PLAYER
1 During playback, press [PLAY/PAUSEf] 1.
Playback is paused.
2 Press [CUE] 2.
The point at which the track is paused is set as the cue point.
The [PLAY/PAUSEf] indicator flashes and the [CUE] indicator
lights. No sound is output at this time.
! When a new cue point is set, the previously set cue point is
canceled.
Press [SEARCH m, n] 3.
The disc is forwarded when [n] is pressed and held in.
The disc is reversed when [m] is pressed and held in.
20
CDJ-850
En
DRB1526-A
20
Adjusting the cue point position
1 While paused at the cue point, press [SEARCH m,
n] 3.
The [PLAY/PAUSEf] and [CUE] indicators flash.
2 Press [SEARCH m, n] 3.
The cue point can be fine-adjusted in units of single frames.
! The same operation is possible using the jog dial.
3 Press [CUE] 2.
Returning to Cue Point (Back Cue)
During playback, press [CUE] 2.
The set immediately returns to the currently set cue point and pauses.
! When [PLAY/PAUSEf] is pressed, playback starts from the cue
point.
Checking Cue Point (Cue Point Sampler)
Select [A. CUE LEVEL].
3 Turn rotary selector p then press it.
The auto cue level setting changes.
Using the [TIME MODE (AUTO CUE)] h button
1 Press [TIME MODE (AUTO CUE)] h for over 5 seconds.
The auto cue level setting changing mode is set.
The current auto cue level is shown on the main unit display.
2 Press [CUE/LOOP CALLc/d] s.
The auto cue level setting changes.
Operations
The position at which the button was pressed is set as the new cue
point.
! When a new cue point is set, the previously set cue point is
canceled.
2 Turn rotary selector p then press it.
Setting Loop
1 /16
1
1/8
2
1/4
4
a
TIME
MODE
AUTO
CUE
IN / CUE
OUT
VINYL
SPEED ADJUST
IN ADJUST
1/2
9
8
7
6
5
CUE / LOOP
RELOOP /EXIT
LOOP
CALL
TOUCH / RELEASE
DELETE
MEMORY
OUT ADJUST
8
JOG MODE
AUTO
BEAT LOOP
VINYL
BEAT
SELECT
TEMPO
DIRECTION
6
10
16
WIDE
REV
MASTER
TEMPO
TRACK SEARCH
After returning to the cue point, press and hold in [CUE] 2.
Playback starts from the set cue point. Playback continues while the
button is held in.
Setting Cue Point during playback (Real
Time Cue)
During playback, press [LOOP IN/CUE (IN ADJUST)] 8.
The point at which the button was pressed is set as the cue point.
Setting auto cue
When a track is loaded or the track search operation is performed,
the silent section at the beginning of the track is skipped and the cue
point is automatically set at the point immediately before the sound
starts.
Press [TIME MODE (AUTO CUE)] h for over 1 seconds.
Auto cue is set to on.
[A. CUE] lights on the main unit display.
! When [TIME MODE (AUTO CUE)] is pressed again for at least 1
second, auto cue is set to off.
! The auto cue level setting remains in the memory, even when the
power is turned off.
Changing the auto cue level
The acoustic pressure level identified as a silent section with the auto
cue function can be selected from eight levels.
–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB
! The auto cue level setting remains in the memory, even when the
power is turned off.
! The auto cue level can be changed using one of the procedures
described below.
Using the [MENU (UTILITY)] m button
1 Press [MENU (UTILITY)] m for over 1 second.
The [UTILITY] screen is displayed.
4
SEARCH
3
1 During playback, press [LOOP IN/CUE (IN ADJUST)] 8.
Loop In Point is set.
! This operation is not necessary if you have already set a Cue Point
as a Loop In Point.
2 Press [LOOP OUT (OUT ADJUST)] 7.
The loop out point is set, and loop playback begins.
Fine-adjusting the loop in point (loop in
adjust)
1 During loop playback, press [LOOP IN/CUE
(IN ADJUST)] 8.
[LOOP IN/CUE (IN ADJUST)] switches to a fast flashing and
[LOOP OUT (OUT ADJUST)] turns off.
The loop in point’s time is displayed on the main unit display.
2 Press [SEARCH m, n] 3.
Loop points can be fine-adjusted in units of single frames.
! The same operation is possible using the jog dial.
! The loop in point can be adjusted by ±30 frames and must be in
front of the loop out point.
3 Press [LOOP IN/CUE (IN ADJUST)] 8.
! Normal loop playback resumes.
! Normal loop playback also resumes if no operation is performed
for over 10 seconds.
! When playing music files, the loop in point can only be adjusted
within the same track.
Fine-adjusting the loop out point (loop
out adjust)
1 During loop playback, press [LOOP OUT
(OUT ADJUST)] 7.
[LOOP OUT (OUT ADJUST)] starts flashing quickly and [LOOP IN/CUE
(IN ADJUST)] turns off.
En
DRB1526-A
21
21
The loop out point’s time is displayed on the main unit display.
3 Press [MEMORY] u.
2 Press [SEARCH m, n] 3.
The loop out point can be adjusted in units of single frames.
! The same operation is possible using the jog dial.
! The loop out point adjustment range is anywhere after the loop in
point.
3 Press [LOOP OUT (OUT ADJUST)] 7.
Loop playback resumes.
! Loop playback also resumes if no operation is performed for over
10 seconds.
[MEMORY] appears on the main unit display. The stored cue point
are displayed on the playing address display. The point information is
recorded on the USB device.
! To store loop points, press [MEMORY] during loop playback. The
stored loop points appear on the playing address display.
Calling out saved cue or loop points
1 Load an SD memory card/USB device in the CDJ-850.
2 Load the track whose cue or loop points you want to
call out.
Canceling Loop playback (Loop Exit)
Cue and loop points are displayed as marks on the playing address
display.
Duriung loop playback, press [RELOOP/EXIT] 6.
Playback continues beyond the Loop Out Point without returning to
the Loop In Point.
Returning to Loop playback (Reloop)
3 Press [CUE/LOOP CALLc/d] s.
The playback position is moved to the selected point and paused.
! When multiple points are recorded, the point moves each time the
button is pressed.
After canceling loop playback, press [RELOOP/EXIT] 6
during playback.
Deleting cue or loop points individually
The track returns to the previously set loop in point and loop playback
begins.
1 Load an SD memory card/USB device in the CDJ-850.
Setting the loop automatically based on
the track’s tempo (Auto Beat Loop)
2 Load the track containing the cue point or loop points
you want to delete.
Cue and loop points are displayed as marks on the playing address
display.
3 Press [CUE/LOOP CALLc/d] s.
1 Press [BEAT SELECT] 9.
Set the number of beats for loop playback. This operation is not necessary when selecting 1-beat, 2-beat, 4-beat or 8-beat loop playback.
— When 1-beat, 2-beat, 4-beat or 8-beat loop playback is selected,
the indicator lights.
— When 1/16-beat, 1/8-beat, 1/4-beat or 1/2-beat loop playback is
selected, the indicator is turned off.
2 In the play or pause mode, press one of the
[AUTO BEAT LOOP] buttons a (1, 2, 4 or 8) at the
position at which you want to set the loop.
BROWSE
TAG LIST
INFO
MENU
BACK
STANDBY
DISC EJECT
USB
DISC
1 /16
1
TIME
MODE
1/8
VINYL
SPEED ADJUST
IN / CUE
1/4
AUTO
CUE
2
4
OUT
RELOOP / EXIT
LOOP
CUE / LOOP
CALL
s
t
u
TOUCH / RELEASE
DELETE
2 Load an SD memory card/USB device in the CDJ-850.
Cue and loop points are displayed as marks on the playing address
display.
3 Press [DISC] e.
4 Press [DELETE] t for at least 5 seconds.
All cue and loop points for the disc currently loaded in the CDJ-850 are
deleted.
! The deletion mode is canceled when any button other than
[MEMORY] is pressed.
TAG TRACK
/REMOVE
PC
1 Load a disc in the CDJ-850.
5 Press [MEMORY] u.
e
USB
STOP
[DELETE] appears on the main unit display and the selected point
information is deleted.
[DISC CUE/LOOP DATA-DELETE? PUSH MEMORY] appears on the
main unit display.
Storing cue and loop points
d
c
b
4 Press [DELETE] t.
Deleting all cue and loop points for a disc
The pressed button flashes, the loop out point is set automatically
according to the track’s tempo (BPM) and the number of beats set in
step 1, and loop playback begins.
! When one of the [AUTO BEAT LOOP] buttons (1, 2, 4 or 8) is
pressed again during auto beat looping, the loop out point is
automatically reset according to the track’s tempo (BPM) and the
number of beats of the button that was pressed, and loop playback
begins.
UTILITY
The playback position is moved to the selected point and paused.
! When multiple points are recorded, the point moves each time the
button is pressed.
MEMORY
Deleting all disc information recorded on
the USB device
1 Load an SD memory card/USB device in the CDJ-850.
1 Press [DISC] e.
2 Set Cue Point or Loop Point.
2 With no disc loaded in this unit, press [DELETE] t for
over 5 seconds.
[DISC CUE/LOOP DATA-DELETE ALL? PUSH MEMORY] appears on the
main unit display.
22
En
DRB1526-A
22
3 Press [MEMORY] u.
Switching the jog dial mode
All the disc information recorded on the USB device is deleted.
! The deletion mode is canceled when any button other than
[MEMORY] is pressed.
Press [VINYL (JOG MODE)] w.
x
Scratch
Adjusting the playing speed (Tempo
control)
1/8
2
1/4
4
1/2
8
JOG MODE
AUTO
BEAT LOOP
VINYL
VINYL
SPEED ADJUST
IN / CUE
OUT
CUE / LOOP
RELOOP / EXIT
LOOP
IN ADJUST
CALL
TOUCH / RELEASE
DELETE
MEMORY
v
OUT ADJUST
BEAT
SELECT
TEMPO
DIRECTION
6
10
16
WIDE
REV
MASTER
TEMPO
TRACK SEARCH
4
y
1 Press [VINYL (JOG MODE)] w.
Operations
w
The mode switches between VINYL and CDJ each time the button is
pressed.
The indicator lights when the VINYL mode is selected.
— VINYL mode: When the top of the jog dial is pressed during
playback, playback stops, and when the jog dial is spun at this
time sound is produced according to the direction in which
the jog dial is spun.
— CDJ mode: Playback does not stop even when the top of the
jog dial is pressed. Such operations as scratching cannot be
performed.
Set the jog mode to VINYL.
SEARCH
3
2 During playback, press the top of the jog dial A.
z
0
CUE
3 Spin the jog dial A in the direction you want to play
and at the desired speed.
PLAY / PAUSE
FWD
REV
Playback stops.
TEMPO
MULTI PLAYER
CDJ-850
B A
Move [TEMPO] z forward and backward.
The sound is played according to the direction and speed at which the
jog dial is spun by spinning the top of the jog dial while pressing it.
4 Release your hand from the top of the jog dial A.
Normal playback resumes.
The playing speed increases when the slider is moved to the [+] side
(towards you), decreases when the slider is moved to the [–] side
(away from you).
The percentage by which the playing speed is changed is displayed at
[%] on the main unit display.
Adjusting the speed at which playback slows
then stops when the top of the jog dial is
pressed and the speed at which playback
returns to normal when the top of the jog dial is
released.
Selecting the playing speed adjustment
range
Turn [VINYL SPEED ADJUST TOUCH/RELEASE] v.
Press [TEMPO ±6, ±10, ±16, WIDE] x.
The playing speed adjustment range switches each time the button is
pressed.
[WIDE, ±16, ±10, ±6] lights on the main unit display.
! The speed can be adjusted in units of 0.02 % at [±6] %, in units of
0.05 % at [±10] %, in units of 0.05 % at [±16] %, and in units of 0.5 %
at [WIDE].
! The [WIDE] adjustment range is ±100 %. When set to –100 %,
playback stops.
! [WIDE] can only be selected when playing music CDs (CD-DA).
Adjusting the playing speed without
changing the pitch (Master Tempo)
Press [MASTER TEMPO] y.
The [MASTER TEMPO] indicator lights. The pitch does not change
even when the playing speed is changed with the [TEMPO] slider.
! The sound is digitally processed, so the sound quality changes.
The speed increases when turned clockwise, decreases when turned
counterclockwise.
! When the jog mode set to the VINYL mode, the speed at which
playback starts and stops when [PLAY/PAUSEf] is pressed
changes simultaneously.
Pitch bend
During playback, spin the outer section without touching
the top of the jog dial A.
The playing speed increases when spun clockwise, decreases when
spun counterclockwise. When spinning is stopped, playback returns
to the normal speed.
! When the jog mode is set to the CDJ mode, the same operation
can be performed by spinning the top of the jog dial.
Frame search
Spin the jog dial A while in the pause mode.
Operating the jog dial
The pause position can be moved in units of single frames.
! The position is moved in the direction of playback when the jog
dial is spun clockwise, in the reverse direction when the jog dial is
spun counterclockwise.
! The top of the jog dial has an embedded switch. Do not place
objects on the jog dial or subject it to strong forces.
! Water or other liquids getting into the set will lead to malfunction.
Super fast search
Spin the jog dial A while pressing [SEARCH m, n] 3.
The track is fast-forwarded/fast-reversed in the direction in which the
jog dial is spun.
En
DRB1526-A
23
23
! This function is canceled when [SEARCH m, n] is released.
! When you stop the jog dial from spinning, normal playback
resumes.
! The fast-forward/fast-reverse speed can be adjusted according to
the speed at which the jog dial is spun.
To use this unit as an audio device, install the driver software on the
computer beforehand (page 11). This unit must also be selected in the
DJ software’s audio output device settings. For details, see your DJ
software’s operating instructions.
1 Connect the USB port on this unit to your computer.
For instructions on connecting, see Using DJ software on page 16.
Super fast track search
2 Press [PC] g.
Turn the jog dial A while pressing [TRACK SEARCH o,
p] 4.
The [CONNECTED] screen appears on the main unit display.
! If tracks are loaded from another source, a warning message is
displayed. After checking the message, press the rotary selector to
turn the message off and switch the source.
The track is advanced at high speed in the direction in which the jog
dial was turned.
Operations in combination with a DJ
mixer
Also refer to the DJ mixer’s operating instructions.
Starting playback using a DJ mixer’s
fader (Fader Start)
1 Connect the CDJ-850 with a Pioneer DJ mixer using
the included control cord.
For instructions on connecting, see Basic style on page 16.
2 Turn on the fader start function from the DJ mixer.
3 Set the cue.
4 Move the DJ mixer’s channel fader or cross fader.
This unit’s pause mode is canceled and the track is played
instantaneously.
! When the channel fader or cross fader is set back to its original
position, playback cues back to the set cue point and the pause
mode is set (Back Cue).
3 Start the DJ software.
Communication with the DJ software starts.
The DJ software can be operated using this unit’s buttons and
controls.
! It may not be possible to use some buttons to operate the DJ
software.
! For messages output by the CDJ-850, see List of MIDI Messages on
page 27.
Changing the MIDI channel setting
1 Press [MENU (UTILITY)] m for over 1 second.
The [UTILITY] screen is displayed.
2 Turn rotary selector p then press it.
Select [MIDI CH.].
3 Turn rotary selector p then press it.
Select the MIDI channel and change the setting. A setting from 1 – 16
can be selected.
4 Press the rotary selector p.
The changed MIDI channel settings are stored.
! To close the [UTILITY] screen, press [MENU (UTILITY)] or [BACK].
Changing the settings
Relay play on two DJ players
m
1 Connect the CDJ-850 and a DJ mixer.
For instructions on connecting, see Using the relay play function on
page 16.
2 Set the DJ mixer’s cross fader to the center position.
p
UTILITY
BROWSE
TAG LIST
INFO
MENU
BACK
TAG TRACK
/REMOVE
STANDBY
PC
DISC EJECT
USB
STOP
USB
DISC
1 /16
1
TIME
MODE
1/8
AUTO
CUE
2
VINYL
SPEED ADJUST
3 Turn auto cue on for both DJ players.
The DJ players’ auto cue indicators light.
1 Press [MENU (UTILITY)] m for over 1 second.
4 Start playback on this unit.
The [UTILITY] screen is displayed.
When playback of the first track on this unit finishes, playback automatically begins on the other DJ player. This unit cues at the beginning of the next track and is set to the pause mode. This operation is
repeated for relay play on the two DJ players.
! The medium can be changed and the cue point set on the DJ
player that is in standby.
! The fader start function does not work during relay play.
! Relay play may not be possible if the two DJ players are not connected to the same DJ mixer.
! If the power of the currently playing DJ player is turned off, playback may start on the other DJ player.
2 Use the rotary selector p to change the setting.
Using the DJ software
The CDJ-850 also outputs the operating data for the buttons and
dials in MIDI format. If you connect a computer with a built-in MIDIcompatible DJ software via a USB cable, you can operate the DJ
software on this unit. The sound of music files being played on the
computer can also be output from the CDJ-850.
24
! Press [BACK] to return to the previous screen.
3 Press the rotary selector p.
The changed settings are stored.
! To close the [UTILITY] screen, press [MENU (UTILITY)] or [BACK].
Setting preferences
Options
settings
Selection items
Descriptions
A. CUE LEVEL
–36 dB/–42 dB/–48 dB/
–54 dB/–60 dB*/–66 dB/
–72 dB/–78 dB
For details, see Changing the auto cue level on
page 21.
MIDI CH
1* to 16
—
En
DRB1526-A
24
Selection items
Descriptions
LIBRARY CREATOR
LIBRARY*/FOLDER
Sets the browsing method
for media on which Pioneer
MEP-7000 libraries are
recorded.
HISTORY NAME
—
For details, see Setting [HISTORY NAME] on page 25.
TAGLIST NAME
—
For details, see Setting
[TAGLIST NAME] on page 25.
AUTO STANDBY
ON*/OFF
For details, see Setting
the auto standby mode on
page 25.
Ver.
—
Displays the CDJ-850’s
software version.
Operations
Options
settings
*: Setting upon purchase
Setting the auto standby mode
1 Turn rotary selector p then press it.
Select [AUTO STANDBY].
2 Turn rotary selector p then press it.
Select [ON].
When the auto standby function is turned on, the standby mode is set
automatically if no operation is performed on this unit for 4 hours.
! When the CDJ-850 is operated, the standby mode is canceled.
! This unit is shipped with the auto standby function turned on.
If you do not want to use the auto standby function, set [AUTO
STANDBY] to [OFF].
Setting [HISTORY NAME]
The names of playback histories recorded on USB devices can be set
in advance.
1 Turn rotary selector p then press it.
Select [HISTORY NAME].
2 Use the rotary selector p to input characters.
3 Press the rotary selector p.
The [HISTORY NAME] setting is changed.
! If [HISTORY NAME] is not set, numbers are added sequentially
after [HISTORY].
! Up to 32 characters (total of one-byte letters and symbols) can be
set for [HISTORY NAME].
Setting [TAGLIST NAME]
The name of [TAGLIST] recorded on USB devices can be set in
advance.
1 Turn rotary selector p then press it.
Select [TAGLIST NAME].
2 Use the rotary selector p to input characters.
3 Press the rotary selector p.
The [TAGLIST NAME] setting is changed.
! If [TAGLIST NAME] is not set, numbers are added in order after
[TAGLIST].
! Up to 32 characters (total of one-byte letters and symbols) can be
set for [TAGLIST NAME].
En
DRB1526-A
25
25
Additional information
Troubleshooting
! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points
below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
! This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turning the power off, waiting 1 minute, then turning the power back on.
! Non-finalized (partial discs) CD-R/-RW cannot be played on the CDJ-850.
! Irregularly shaped discs other than standard 12 cm discs cannot be played on the CDJ-850 (doing so will lead to damage or accidents).
! The BPM measured by the CDJ-850 may differ from the BPM indicated on the disc or that of a Pioneer DJ mixer, etc. This is due to the different methods used for measuring the BPM, and is not a malfunction.
Problem
Check
Remedy
Disc cannot be ejected.
—
If the [DISC EJECT h] button does not work, insert the pin in the
disc force eject pin insertion hole to eject the disc. (page 17)
Is the disc or file playable?
See About discs on page 7 or Playable music file formats on page 8.
Is the auto cue function activated?
Press [TIME MODE (AUTO CUE)] for at least 1 second to cancel
the auto cue function. (page 21)
File cannot be played.
Is the file copyright-protected (by DRM)?
Copyright-protected files cannot be played.
No sound is produced, or sound is distorted
or noisy.
Are you operating the connected DJ mixer properly?
Check the operation of the DJ mixer.
Is the CDJ-850 placed near a TV?
Turn the TV’s power off, or install the CDJ-850 and TV away from
one another.
Loud noise is produced or playback stops
when a certain disc is played.
Is the disc scratched?
Scratched discs may not play.
Is the disc dirty?
Wipe the dirt off the disc. (page 28)
File information is not properly displayed.
Is the information recorded in a language not supported by the CDJ-850?
When creating files using DJ software, etc., record the information in a language supported by the CDJ-850.
Track search operation takes too long.
Is the auto cue function activated?
Track searching may take some time when there are long silent
sections between tracks.
—
If track searching is not possible within 10 seconds, a cue point is
set at the beginning of the track.
Back cue function does not work.
Is a cue point set?
Set a cue point. (page 20)
Loop play function does not work.
Is a cue point set?
Set a cue point. (page 20)
Settings are not stored in the memory.
Has the power been turned off directly after
changing the setting?
After changing settings, wait at least 10 seconds before turning
the power off.
USB device is not recognized.
Is the USB device properly connected?
Connect the device securely (all the way in).
Is the USB device connected via a USB hub?
USB hubs cannot be used.
Is the USB device supported by the CDJ-850?
This player only supports USB mass storage class devices.
Playback does not start when disc is loaded.
This player supports portable flash memory and digital audio
playback devices.
Is the file format supported by the CDJ-850?
Check the file format of the connected USB device. For the file
formats supported by the CDJ-850, see About USB devices on
page 8.
Are you using a USB device (such as a bus powerdriven hard disk) whose current is higher than this
unit’s rated current (500 mA)?
Use a USB device within this unit’s rated current (such as a hard
disk driven by an AC adapter or other external power supply).
—
Turn the power off, wait 1 minute, then turn the power back on.
Is there sufficient free space on the USB device?
A maximum of 100 cue and loop points per disc can be recorded
on USB devices (10 per track for media other than discs). If you
attempt to record more points than the limit, [POINT FULL] is
displayed and the points cannot be recorded.
Is the USB device write-protected?
Set the USB device so that files can be written on it.
Set the USB device’s write-protect switch to the off position.
Cue or loop points of tracks recorded on USB
devices are not displayed.
Has the USB device been properly removed?
Points may not be displayed if the SD memory card/USB device is
removed without performing the proper stopping procedure or if
the CDJ-850’s power is turned off.
Time is required to read USB devices (flash
memory drives and hard discs).
Is there a large number of folders or files recorded
on the USB device?
When there are many folders or files, some time may be required
for loading.
Are files other than music files stored on the USB
device?
When files other than music files are stored in folders, time is
required to read them as well. Do not store files or folders other
than music files on the USB device.
—
When playing files recorded in VBR, it may happen that the set
cannot detect the length of the track immediately and that some
time is required for the playing address display to appear.
Cue or loop points of tracks recorded on USB
devices are not stored in the memory.
The playing address display is not displayed in
the remaining time mode.
26
En
DRB1526-A
26
Problem
Check
Remedy
Library browsing is not possible.
Is a medium on which library information is
recorded loaded?
The library browse mode is only set when media on which library
information is recorded are loaded. When a medium on which
no library information is recorded is loaded, the folder browse
mode is set.
Is the USB device write-protected?
Set the USB device so that files can be written on it.
Set the USB device’s write-protect switch to the off position.
Is the auto standby function activated?
This unit is shipped with the auto standby function turned on.
If you do not want to use the auto standby function, set [AUTO
STANDBY] to [OFF]. (page 25)
Nothing is displayed.
Error messages
Error code
Error type
Description of error
Cause and action
E-7201
TOC READ ERROR
TOC data cannot be read.
E-8301
E-8302
E-8303
PLAYER ERROR
Disc that cannot be played normally is loaded.
!
!
!
E-8304
DECODE ERROR
E-8305
DATA FORMAT ERROR
Music files that cannot be played normally are
loaded.
Format is wrong.dReplace with music files in
the proper format.
E-8306
NO FILE
Track recorded in the library, playlist, etc., has been
deleted from the USB device and cannot be played.
Do not delete that track from the USB device.
E-9101
MECHANICAL TIME OUT
Mechanical operation has not stopped within specified time.
There is a foreign object in the disc insertion
slot.dRemove the foreign object.
List of MIDI Messages
SW Name
Jog dial (scratch)
TEMPO
TOUCH/RELEASE
Jog dial (spin
outer section)
SELECT PUSH
(turn)
SW Type
—
VR
VR
—
General
Purpose
Controller
MIDI Messages
MSB
Bn
Bn
Bn
Bn
Bn
10
1D
1E
30
4F
dd
dd
Notes
A linear value corresponding to the
speed, from stop to
4X: 64 for stop, 65
(0.06X) – 127 (4X) in
the forward direction,
63 (0.06X) – 0 (4X) in
the reverse direction.
0 – 127, 0 on the – side,
127 on the + side
dd
0 – 127, 0 (min.) on the
left side, 127 (max.) on
the right side
dd
A linear value corresponding to the
speed from 0.5X to
4X: 64 when stopped
(under 0.49X), 65
(0.5X) to 127 (4X) in
the forward direction,
63 (0.5X) to 0 (4X) in
the reverse direction.
dd
98 – 127, 1 – 30 Difference of count from
previous time is sent
(±1 – ±30) When over
±30, set at ±30
PLAY/PAUSE f
SW
9n
00
dd
OFF=0, ON=127
CUE
SW
9n
01
dd
OFF=0, ON=127
SEARCH n
SW
9n
02
dd
OFF=0, ON=127
Disc is cracked.dReplace the disc.
Disc is dirty.dClean the disc.
If operation is normal with other discs, the
problem is with that disc.
MIDI Messages
SW Name
SW Type
LOOP OUT (OUT
ADJUST)
SW
9n
07
dd
OFF=0, ON=127
RELOOP/EXIT
SW
9n
08
dd
OFF=0, ON=127
MEMORY
SW
9n
0A
dd
OFF=0, ON=127
CUE/LOOP CALLd
SW
9n
0B
dd
OFF=0, ON=127
CUE/LOOP CALLc
SW
9n
0C
dd
OFF=0, ON=127
DELETE
SW
9n
0D
dd
OFF=0, ON=127
TIME MODE
(AUTO CUE)
SW
9n
0E
dd
OFF=0, ON=127
TEMPO ±6, ±10,
±16, WIDE
SW
9n
10
dd
OFF=0, ON=127
MASTER TEMPO
SW
9n
11
dd
OFF=0, ON=127
VINYL
SW
9n
12
dd
OFF=0, ON=127
Jog dial (press
top)
SW
9n
20
dd
OFF=0, ON=127
DIRECTION REV
SW
9n
21
dd
OFF=0, ON=127
AUTO BEAT
LOOP 1
SW
9n
28
dd
OFF=0, ON=127
AUTO BEAT
LOOP 2
SW
9n
29
dd
OFF=0, ON=127
AUTO BEAT
LOOP 4
SW
9n
2A
dd
OFF=0, ON=127
AUTO BEAT
LOOP 8
SW
9n
2B
dd
OFF=0, ON=127
BEAT SELECT
SW
9n
2D
dd
OFF=0, ON=127
DISC EJECT h
SW
9n
2F
dd
OFF=0, ON=127
TAG TRACK/
REMOVE
SW
9n
30
dd
OFF=0, ON=127
BACK
SW
9n
32
dd
OFF=0, ON=127
SW
9n
33
dd
OFF=0, ON=127
MSB
Additional information
When the CDJ-850 cannot operate normally, an error code appears on the display. Take the necessary measures, referring to the table below. If an
error code not indicated on the table below is displayed or if the same error code appears after the indicated action has been taken, contact your
store of purchase or nearby Pioneer service station.
Notes
SEARCH m
SW
9n
03
dd
OFF=0, ON=127
SELECT PUSH
(press)
TRACK SEARCH p
SW
9n
04
dd
OFF=0, ON=127
BROWSE
SW
9n
36
dd
OFF=0, ON=127
TRACK SEARCH o
SW
9n
05
dd
OFF=0, ON=127
TAGLIST
SW
9n
37
dd
OFF=0, ON=127
LOOP IN/CUE (IN
ADJUST)
SW
9n
06
dd
OFF=0, ON=127
INFO
SW
9n
38
dd
OFF=0, ON=127
En
DRB1526-A
27
27
SW Name
SW Type
MENU (UTILITY)
SW
MIDI Messages
MSB
9n
3F
dd
Notes
OFF=0, ON=127
n is the channel number.
Cleaning discs
! Discs may not play if there are fingerprints or dust on them. In this
case, use a cleaning cloth, etc., to gently wipe the disc from the
inside towards the outside. Do not use dirty cleaning cloths.
List of icons displayed on the main
unit display section
Genre
Rating
Artist
Time
Album
Registered in tag list
Track/file name
Playback is not possible
Playlist
Playing
Remixer
Played
Original artist
Label
Playback history
Folder
WAIT
! Do not use benzene, thinner or other volatile chemicals. Also do
not use record spray or antistatic agents.
! For tough dirt, apply some water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe off the moisture with a dry
cloth.
! Do not use damaged (cracked or warped) discs.
! Do not let the signal surface of discs get scratched or dirty.
! Do not place two discs in the disc tray, one on top of the other.
! Do not attach pieces of paper or stickers to discs. Doing so could
warp discs, making it impossible to play them. Also note that
rental discs often have labels attached to them, and the label’s
glue may have oozed out. Check that there is no glue around the
edges of such labels before using rented discs.
About specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be
played on this player. Do not attempt to play such discs, as they could
damage the player.
Cautions on use
About condensation
Water droplets (condensation) may form inside the unit (on operating
parts and lenses) in the winter, for example, if the unit is moved from a
cold place into a warm room or if the temperature in the room in which
the unit is installed rises suddenly (through heating, etc.). The unit
will not operate properly and will not be playable with condensation
inside. Let the unit stand for 1 to 2 hours at room temperature (though
this time depends on the conditions of the condensation) without
turning on the power. The water droplets will evaporate and the unit
will become playable. Condensation can occur in the summer as well
if the unit is exposed to the direct wind from an air-conditioner, etc. If
this happens, move the unit to a different location.
Cleaning the lens
The player’s lens should not become dirty in normal use, but if for
some reason it should malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center. Although lens cleaners
for players are commercially available, we advise against using them
since some may damage the lens.
Handling discs
About condensation on discs
Water droplets (condensation) may form on the surface of discs if
they are moved from a cold place (particularly in winter) into a warm
room. Discs may not play normally if there is condensation on them.
Carefully wipe the water droplets off the surface of the disc before
loading it.
Disclaimer
! Pioneer and rekordbox are trademarks or registered trademarks of
the Pioneer Corporation.
! Microsoft®, Windows Vista®, Windows® and Internet Explorer®
are registered trademarks or trademarks in the United States and
other countries of the Microsoft Corporation of the United States.
! Apple, Macintosh, Mac OS, Safari, iTunes and Finder are registered trademarks of Apple Inc. in the United States and other
countries.
! Pentium is a registered trademark of Intel Corporation.
! Adobe and Reader are either registered trademarks or trademarks
of Adobe Systems Incorporated in the United States and/or other
countries.
! ASIO is a trademark of Steinberg Media Technologies GmbH.
The names of companies and products mentioned herein are the
trademarks of their respective owners.
Storing
! Always place discs in their cases and store them vertically, avoiding hot, humid places, places exposed to direct sunlight and
extremely cold places.
! Be sure to read the cautions included with the disc.
28
En
DRB1526-A
28
This product has been licensed for nonprofit use. This product has
not been licensed for commercial purposes (for profit-making use),
such as broadcasting (terrestrial, satellite, cable or other types
of broadcasting), streaming on the Internet, Intranet (a corporate
network) or other types of networks or distributing of electronic
information (online digital music distribution service). You need to
acquire the corresponding licenses for such uses. For details, visit
http://www.mp3licensing.com.
Cautions on copyrights
Using the support site
Power requirements.............................................................AC 120 V, 60 Hz
Power consumption............................................................................... 21 W
Power consumption (standby)............................................................. 0.4 W
Main unit weight.......................................................................3.3 kg (7.3 lb)
Max. dimensions.............................. 305 mm (W) × 105.5 mm (H) × 364.4 mm (D)
(12 in. (W) × 4.2 in. (H) × 14.3 in. (D))
Tolerable operating temperature........+5 °C to +35 °C (+41 °F to +95 °F)
Tolerable operating humidity.....................5 % to 85 % (no condensation)
Analog audio output (AUDIO OUT L/R)
Output terminal........................................................................ RCA terminal
Output Level........................................................................ 2.0 Vrms (1 kHz)
Frequency response............................................................... 4 Hz to 20 kHz
S/N ratio............................................................................................. 115 dB
Total harmonic distortion ............................................................. 0.003 %
USB downstream section (USB)
Port........................................................................................................Type A
Power supply....................................................................5 V/500 mA or less
USB upstream section (USB)
Port........................................................................................................Type B
Control output (CONTROL)
Port................................................................................................... Mini-jack
Additional information
rekordbox restricts playback and duplication of copyright-protected
music contents.
! When coded data, etc., for protecting the copyright is embedded in
the music contents, it may not be possible to operate the program
normally.
! When rekordbox detects that coded data, etc., for protecting the
copyright is embedded in the music contents, processing (playback, reading, etc.) may stop.
Recordings you have made are for your personal enjoyment and
according to copyright laws may not be used without the consent of
the copyright holder.
! Music recorded from CDs, etc., is protected by the copyright laws
of individual countries and by international treaties. It is the full
responsibility of the person who has recorded the music to ensure
that it is used legally.
! When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
Specifications
! The specifications and design of this product are subject to change
without notice.
! The articles concerning free repairs, etc., indicated on the warranty
do not apply to the rekordbox music management software. Before
installing or using rekordbox, carefully read the articles in Software
end user license agreement on page 9.
Before making an inquiry about rekordbox operations and technical
support, refer to the operating instructions for rekordbox and check
the FAQs published on the support site for rekordbox.
rekordbox support site
http://www.prodjnet.com/rekordbox/support/
! To make an inquiry about rekordbox, you need to register as a user in
advance on the support site for rekordbox.
! You need to enter the license key for your user registration. Have
the license key ready. Also, be sure not to forget the login name
(your e-mail address) and the password specified for your user
registration, as well as the license key.
! Pioneer Corporation collects your personal information for the
following purposes:
1 To provide customer support for your purchased product
2 To inform you of product or event information by e-mail
3 To reflect your opinions collected by survey on product planning
— Your personal information is kept confidential corresponding to
the privacy policy set forth by our company.
— You can check our privacy policy on the support site for
rekordbox.
! When making inquiries regarding rekordbox, please be sure to
furnish your computer type and specifications (CPU, installed
memory, other connected peripherals, etc.), the operating system
and version used, as well as concrete information regarding the
issue at hand.
— For an inquiry about configuring your computer with peripheral
devices other than our products and the corresponding
technical support, contact each manufacturer or retailer.
! rekordbox is subject to upgrade for enhanced function and
performance. The upgrade program can be downloaded on the
support site. We strongly recommend you upgrade your software on
a regular basis to keep the latest updates on your system.
En
DRB1526-A
29
29
30
En
DRB1526-A
30
Pioneer Electronics(USA) Inc.
Limited Warranty
WARRANTY PERIOD
For the period specified below from the date of original purchase (the warranty period), Pioneer Electronics(USA) Inc. (Pioneer) warrants that the
products described below, if purchased directly from Pioneer or from an authorized Pioneer dealer or distributor in the United States and
installed and operated according to operating instructions enclosed with the unit, will be repaired or replaced with a unit of comparable value,
at the option of Pioneer, without charge to you for parts or labor for actual repair work if such products fail to function properly under normal use
due to a manufacturing defect. Parts supplied under this warranty may be new or rebuilt at the option of Pioneer.
PRODUCTS COVERED
MODEL PREFIX
CDJ, CMX .................................................................................... 1 YEAR
DVJ .............................................................................................. 1 YEAR
DMP ............................................................................................. 1 YEAR
DJM ............................................................................................. 1 YEAR
EFX .............................................................................................. 1 YEAR
VSW ............................................................................................. 1 YEAR
1 YEAR
1 YEAR
1 YEAR
1 YEAR
1 YEAR
1 YEAR
This warranty covers the product during the warranty period whether in the possession of the original owner or any subsequent owner.
WHAT’S NOT COVERED
This warranty does not cover the A-B Cross Fader in the DJ Mixer (model prefix DJM). This warranty does not cover any appearance item, any
damage to the product resulting from alterations, modifications not authorized in writing by Pioneer, accident, misuse or abuse, damage due to
lightning or to power surges or personal injury due to excessive sound pressure levels. This warranty does not cover the cost of parts or labor
which would be otherwise provided without charge under this warranty, obtained from any source other than a Pioneer Authorized Service
Company or other designated location. This warranty does not cover defects or damage caused by the use of unauthorized parts or labor, or
from improper maintenance.
Additional information
DJ Compact Disc Player
DJ DVD Player
Digital Media Player
DJ Mixer
DJ Effector
Video Switcher
WARRANTY PERIOD
Parts
Labor
PRODUCTS WITH ALTERED, DEFACED OR REMOVED SERIAL NUMBERS SHALL VOID THIS WARRANTY.
YOUR RIGHTS
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
FOLLOWING LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THE ABOVE WARRANTIES ARE IN LIEU OF AND EXCLUDE ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE. IN NO
EVENT SHALL PIONEER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF LOSS OF USE OR
CLAIMS ASSERTED ON THE BASIS OF TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE.
TO OBTAIN SERVICE
Pioneer has appointed a number of Authorized Industrial Service Companies throughout the U.S.A. should your product ever require service. To
receive warranty service you will need to present your sales receipt or, if rented, your rental contract showing place and date of original
purchase transaction.
Should it become necessary to ship the unit, you will need to package the product and send it, transportation prepaid, to an Authorized Service
Company in the U.S.A. Carefully package the product using adequate padding material to prevent damage in transit. The original container is
ideal for this purpose. Include in the package your name, address, telephone number where you can be reached during business hours, a copy
of your sales receipt, and a detailed description of the problem.
To find the name and address of the nearest Pioneer Authorized service location, to obtain warranty service or for additional information about
this warranty. please call or write:
PIONEER ELECTRONICS(USA) INC.
CUSTOMER SUPPORT DIVISION
P.O. BOX 1760
LONG BEACH, CALIFORNIA 90801-1760
1-800-872-4159
DO NOT RETURN ANY PRODUCT TO ABOVE ADDRESS. IT IS NOT A SERVICE LOCATION.
TO ORDER REPLACEMENT PARTS CALL 800-228-7221
RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE
Model No.
Serial No.
Purchase Date
Purchased From
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
En
DRB1526-A
31
31
To register your product, find the nearest authorized service location, to
purchase replacement parts, operating instructions, or accessories,
please go to one of following URLs :
Pour enregistrer votre produit, trouver le service après-vente agréé le plus
proche et pour acheter des pièces de rechange, des modes d’emploi ou
des accessoires, reportez-vous aux URL suivantes :
In the USA/Aux Etats-Unis
http://www.pioneerelectronics.com
In Canada/Aux Canada
http://www.pioneerelectronics.ca
S018_B1_EnFr
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270
K002_B1_En
Printed in
<DRB1526-A>
DRB1526-A
32
Download PDF

advertising