Ariens 924126 ST11526DLE Snow Blower User Manual

HORIZON SERIES
FOR MODEL :
T92
TREADMILL USER’S GUIDE
T92_Rev.1.2.indd 1
6/10/08 8:40:02 AM
INTRODUCTION
INTRODUCTION
IMPORTANT
PRECAUTIONS
CONGRATULATIONS and THANK YOU for your purchase of this Horizon Series Treadmill!
ASSEMBLY
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Series treadmill
can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-motor warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
BEFORE
YOU BEGIN
The Horizon Series delivers.
Assembly
6
Before You Begin
15
Treadmill Operation
18
Conditioning Guidelines
24
Troubleshooting & Maintenance
31
Limited Warranty
34
Back Panel
T92_Rev.1.2.indd 2-3
LIMITED
WARRANTY
CONTACT INFORMATION
CONDITIONING
GUIDELINES
4
TROUBLESHOOTING
& MAINTENANCE
Important Precautions
TREADMILL
OPERATION
TABLE OF CONTENTS
6/10/08 8:40:04 AM
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
TREADMILL
OPERATION
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
This product is for use on a nominal 110-volt circuit and
has a grounding plug that looks like the illustration
below. This product must be used on a dedicated
circuit. To determine if you are on a dedicated circuit,
shut off the power to that circuit and observe if any other
devices lose power. If so, move devices to a different
circuit. Note: There are usually multiple outlets on one
circuit. It is recommended that the treadmill be used
with a 20 amp circuit for optimal performance.
LIMITED
WARRANTY
T92_Rev.1.2.indd 4-5
3-Pole Grounded Outlet
GROUNDED
TREADMILL
POWER CORD
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
GROUNDING INSTRUCTIONS
At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet.
At NO time should children under the age of 12 use the treadmill.
Children over the age of 12 should not use the treadmill without adult supervision.
TREADMILL
OPERATION
ASSEMBLY
Connect this exercise product to a properly grounded outlet only. See grounding
instructions.
• Never use the treadmill before securing the safety tether clip to your clothing.
• If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness
of breath, stop exercising immediately and consult your physician before continuing.
• Do not wear clothes that might catch on any part of the treadmill.
• Always wear athletic shoes while using this equipment.
• Do not jump on the treadmill.
• Keep power cord away from heated surfaces.
• Do not insert or drop any object into any opening.
• Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)
• At no time should more than one person be on treadmill while in operation.
• This treadmill should not be used by persons weighing more than 300 pounds. Failure to comply will void
the warranty.
• This treadmill is intended for single family in-home use only. Do not use this treadmill in any commercial,
rental, school or institutional setting. Failure to comply will void the warranty.
• Do not use treadmill in any location that is not temperature controlled, such as but not limited to garages,
porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
• Use the treadmill only as described in this manual.
Other safety tips for your treadmill
WARNING
OPERATION
CONDITIONING
GUIDELINES
IMPORTANT
PRECAUTIONS
Read all instructions before using this treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill. It is the
responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the
number listed on the back panel of this manual.
To reduce the risk of damaging important components on your treadmill, it is strongly
recommended that your treadmill is plugged into a dedicated 20 amp circuit, without
the use of an additional extension cord and/or power strip. Failure to comply may void
the warranty.
TROUBLESHOOTING
& MAINTENANCE
SAVE THESE INSTRUCTIONS
WARNING
INTRODUCTION
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons:
IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.
It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
LIMITED
WARRANTY
INTRODUCTION
I M P O R TA N T PRECAUTIONS
6/10/08 8:40:05 AM
SPEAKERS
STORAGE AREA
CONSOLE MAST COVER
STORAGE AREA
IMPORTANT
PRECAUTIONS
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
WARNING
CONSOLE
FAN
GRIP PULSE HANDRAILS
SAFETY KEY PLACEMENT
HEADPHONE JACK
CONSOLE MAST SUPPORT BAR
CONSOLE MAST
HANDLEBARS
MOTOR COVER
ON/OFF SWITCH
ASSEMBLY
ASSEMBLY
During the assembly process of the treadmill there are several areas that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly
tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that
are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play
in the console masts or any forward and back play in the console assembly or handlebars. If there is any
play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the
assembly instructions must be reviewed and corrective actions should be taken.
INTRODUCTION
READING RACK
MP3-IN JACK
IMPORTANT
PRECAUTIONS
INTRODUCTION
A S S E M B LY
CIRCUIT BREAKER
POWER CORD
RUNNING BELT / RUNNING DECK
TROUBLESHOOTING
& MAINTENANCE
Enter your serial number and
model name in the boxes below:
SERIAL NUMBER:
MODEL NAME:
LIMITED
WARRANTY
* Refer to the serial number and model name when calling for service.
* Also enter this serial number on your Warranty Card.
T92_Rev.1.2.indd 6-7
ROLLER END CAP
ADJUSTABLE DECK CUSHIONING
REAR ROLLER
ADJUSTMENT BOLTS
TREADMILL
OPERATION
TOOLS INCLUDED
6mm T-wrench
5 mm T-wrench
10 mm L-wrench
4mm L-wrench
Screwdriver
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
Before proceeding, find your treadmill’s serial number
and model name located under the deck on the frame
crossbar and enter it in the space provided below.
TRANSPORT WHEEL
PARTS INCLUDED
1 Safety Key
1 Console Assembly (located under treadmill deck)
2 Console Mast Covers
1 Power Cord
6 Hardware Bags
2 Handlebars
2 Console Masts
1 Console Mast Support Bar
1 Bottle of Silicone Lubricant
1 Audio Adaptor Cable
TROUBLESHOOTING
& MAINTENANCE
TREADMILL
OPERATION
Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on
your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side.
Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled
and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The
enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab
hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN INJURY!
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
LIMITED
WARRANTY
BEFORE
YOU BEGIN
UNPACKING
BEFORE
YOU BEGIN
SIDE RAIL
6/10/08 8:40:11 AM
INTRODUCTION
INTRODUCTION
P R E - A S S E M B LY
IMPORTANT
PRECAUTIONS
from packaging until specified to do so in the assembly instructions. Failure to do
so may result in injury! Remove plastic wrap from console masts.
Note: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
ASSEMBLY STEP 2
HARDWARE BAG 2 CONTENTS :
BOLT (D)
Qty: 1
ASSEMBLY
A S S E M B LY S T E P 1
FLAT WASHER (E)
27 mm
Qty: 1
WAVY WASHER (F)
29 mm
Qty: 1
IMPORTANT
PRECAUTIONS
DO NOT ATTEMPT TO LIFT THE TREADMILL!* Do not move or lift treadmill
LOCK LATCH PIN (G)
Qty: 1
ASSEMBLY
WARNING
MAIN FRAME
HARDWARE BAG 1 CONTENTS :
BOLT (D)
Qty: 1
FLAT WASHER (E)
27 mm
Qty: 1
TEFLON WASHER (C)
18 mm
Qty: 1
LEAD WIRE
WAVY WASHER (F)
29 mm
Qty: 1
RIGHT CONSOLE MAST
RIGHT FOLDING FRAME
MAIN FRAME
BEFORE
YOU BEGIN
FLAT WASHER (B)
20 mm
Qty: 1
BEFORE
YOU BEGIN
BOLT (A)
15 mm
Qty: 1
CONSOLE CABLE
LEFT CONSOLE MAST
WAVY WASHER (F)
FLAT WASHER (E)
A Open Hardware Bag 2.
BOLT (D)
BOLT (A)
FLAT WASHER (B)
ELEVATION FRAME
TEFLON WASHER (C)
TROUBLESHOOTING
& MAINTENANCE
A Open HARDWARE BAG 1.
LIMITED
WARRANTY
D Insert bolt (D) and 1 FLAT washer (E) through left console mast followed by
1 WAVY washer (F) and attach to MAIN FRAME.
CONDITIONING
GUIDELINES
LEFT LINKAGE ARM
C Pull LEAD WIRE through RIGHT CONSOLE MAST. After pulling the lead wire through the
mast, the top of the console cable should be located at the top of the mast. Detach and
discard lead wire.
D Continue step 2 on next page.
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
B Attach LOCK LATCH PIN (G) into RIGHT FOLDING FRAME using T-wrench and
tighten completely.
B Move left linkage arm into position. Insert bolt (A) and FLAT WASHER (B) into left
linkage arm followed by a Teflon washer (C) and attach to elevation frame.
C Lift left console mast into upright position. Be sure to hold the console mast firmly, as
it will not stay in the upright position on its own.
T92_Rev.1.2.indd 8-9
LIMITED
WARRANTY
TREADMILL
OPERATION
TREADMILL
OPERATION
LOCK LATCH PIN (G)
6/10/08 8:40:25 AM
FLAT WASHER (E)
27 mm
Qty: 1
ASSEMBLY
MAIN FRAME
LOCK LATCH PIN (G)
Qty: 1
WAVY WASHER (F)
29 mm
Qty: 1
BOLT (H)
15 mm
Qty: 4
SPRING WASHER (I)
15 mm
Qty: 4
FLAT WASHER (J)
19 mm
Qty: 2
IMPORTANT
PRECAUTIONS
HARDWARE BAG 3 CONTENTS :
ARC WASHER (K)
17 mm
Qty: 2
RIGHT CONSOLE MAST
CONSOLE CABLE
WAVY WASHER (F)
ASSEMBLY
IMPORTANT
PRECAUTIONS
HARDWARE BAG 2 CONTENTS:
BOLT (D)
Qty: 1
INTRODUCTION
ASSEMBLY STEP 3
FLAT WASHER (E)
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
INTRODUCTION
A S S E M B LY S T E P 2 ( C O N T I N U E D )
CONSOLE CABLES
BOLT (D)
PRE-ATTACHED NUT
CONSOLE
RIGHT LINKAGE ARM
CONDITIONING
GUIDELINES
F Unscrew PRE-ATTACHED NUT and remove from RIGHT
LINKAGE ARM and discard. Carefully move right linkage
arm and PRE-ATTACHED TEFLON WASHER into position
and attach to ELEVATION FRAME.
Note: While holding RIGHT CONSOLE MAST in the
upright position, tighten PRE-ATTACHED BOLT using
T-wrench to attach RIGHT LINKAGE ARM.
TROUBLESHOOTING
& MAINTENANCE
G Cut band holding FOOT LOCK LATCH assembly. Lift the
running deck until lock latch on side of treadmill is
fully engaged.
CONSOLE MAST
Note: If you have attempted to
* move the treadmill from the box
and the machine has sprung
open and cannot be assembled,
refer to the troubleshooting
section in order to restore the
treadmill to its proper position.
Lower the treadmill running deck from the folded
position by stepping on LOCK LATCH on lower right side.
SPRING WASHER (I)
BOLT (H)
A Open HARDWARE BAG 3.
B With running deck in lowered position, place console on the console masts. Align the
brackets that are underneath the console with the top holes of the console masts.
C To assemble the Console to the LEFT CONSOLE MAST, insert 1 BOLT (H), 1 SPRING
WASHER (I) and 1 FLAT WASHER (J) into the side hole and insert 1 BOLT (H), 1 SPRING
WASHER (I) and 1 ARC WASHER (K) into the back hole in the left CONSOLE mast
and lightly tighten.
1
3
H Remove console from box and place out of the way.
I
FLAT WASHER (J)
CONDITIONING
GUIDELINES
E Insert 1 bolt (D) and 1 FLAT washer (E) through
RIGHT console mast followed by 1 WAVY washer (F)
and attach to MAIN FRAME.
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
TREADMILL
OPERATION
ARC WASHER (K)
PRE-ATTACHED BOLT
FOOT LOCK LATCH
2
TROUBLESHOOTING
& MAINTENANCE
TREADMILL
OPERATION
ELEVATION FRAME
D Gently lift right side of the console to connect the console cables. Carefully tuck
wires in mast to avoid damage. NOTE: Do not pinch console cable or grip pulse wires.
E Repeat step C above to assemble the right console mast to the console.
LIMITED
WARRANTY
F Leave console bolts loose until after STEP 4 is completed.
10
T92_Rev.1.2.indd 10-11
11
LIMITED
WARRANTY
PRE-ATTACHED
TEFLON WASHER
6/10/08 8:40:31 AM
INTRODUCTION
HARDWARE BAG 5 CONTENTS :
BOLT (L)
15 mm
Qty: 4
BOLT (M)
120 mm
Qty: 4
ARC WASHER (K)
17 mm
Qty: 4
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
ASSEMBLY
ASSEMBLY
IMPORTANT
PRECAUTIONS
HARDWARE BAG 4 CONTENTS :
ASSEMBLY STEP 5
IMPORTANT
PRECAUTIONS
INTRODUCTION
A S S E M B LY S T E P 4
BOLT (M)
ARC WASHER (K)
CONSOLE MAST
HANDLEBARS
CONSOLE MAST
TREADMILL
OPERATION
TREADMILL
OPERATION
SUPPORT BAR
BOLT (L)
C. Insert BOLTS (L) into all 4 holes of the SUPPORT BAR.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
LIMITED
WARRANTY
12
T92_Rev.1.2.indd 12-13
C Repeat on other side.
TROUBLESHOOTING
& MAINTENANCE
TROUBLESHOOTING
& MAINTENANCE
D. Tighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
B. Align SUPPORT BAR with holes in CONSOLE MASTS.
B Attach LEFT HANDLEBAR to CONSOLE MAST using 2 BOLTS (M) and 2 ARC WASHERS (K).
NOTE: Look into holes before inserting bolt to prevent cables from
being damaged.
13
LIMITED
WARRANTY
CONDITIONING
GUIDELINES
A. Open Hardware Bag 4.
CONDITIONING
GUIDELINES
A Open HARDWARE BAG 5.
6/10/08 8:40:38 AM
INTRODUCTION
A S S E M B LY S T E P 6
IMPORTANT
PRECAUTIONS
HARDWARE BAG 6 CONTENTS :
SCREW (N)
10 mm
Qty: 10
IMPORTANT
PRECAUTIONS
Congratulations on choosing your treadmill. You’ve taken an important step in developing and sustaining
an exercise program! Your treadmill is a tremendously effective tool for achieving your personal fitness
goals. Regular use of your treadmill can improve the quality of your life in so many ways.
Here are just a few of the health benefits of exercise:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
CONSOLE MAST COVER
CONSOLE MAST
ASSEMBLY
3 feet
B Attach LEFT CONSOLE MAST COVER to CONSOLE MAST using 5 SCREWS (N).
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt.
Place your feet on the side rails before starting the treadmill. Start
walking on the belt only after the belt has begun to move. Never start the
treadmill at a fast running speed and attempt to jump on!
CONDITIONING
GUIDELINES
C Repeat on other side.
CIRCUIT BREAKER
TROUBLESHOOTING
& MAINTENANCE
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will light up.
6 feet
CONDITIONING
GUIDELINES
TREADMILL
OPERATION
WARNING
A Open HARDWARE BAG 6.
POWER SWITCH
3 feet
TREADMILL
OPERATION
Place the treadmill on a level surface. There should be 6 feet of clearance
behind the treadmill, 3 feet on each side and one foot in front for folding
and the power cord. Do not place the treadmill in any area that will block
any vent or air openings. The treadmill should not be located in a garage,
covered patio, near water or outdoors.
1 foot
SAFETY KEY
Your treadmill will not start unless the safety key is placed in position. Attach the clip end securely to your
clothing. This safety key is designed to cut the power to the treadmill if you should fall. Check the operation
of the safety key every 2 weeks.
WARNING
TROUBLESHOOTING
& MAINTENANCE
BEFORE
YOU BEGIN
LOCATION OF THE TREADMILL
SCREW (N)
BEFORE
YOU BEGIN
ASSEMBLY
The key to reaping these benefits is to develop an exercise habit. Your new treadmill will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your treadmill in the comfort of your home. This guide provides you with basic
information for using and enjoying your new machine.
NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR
CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT
COME OFF YOUR CLOTHING.
LIMITED
WARRANTY
YOU’RE FINISHED!
14
T92_Rev.1.2.indd 14-15
15
LIMITED
WARRANTY
INTRODUCTION
BEFORE YOU BEGIN
6/10/08 8:40:46 AM
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
If you can feel a slipping sensation when running on the
treadmill, the running belt must be tightened. In most
cases, the belt has stretched from use, causing the
belt to slip. This is a normal and common adjustment.
To eliminate this slipping, turn the treadmill off
and tension both the rear roller bolts using the
supplied Allen wrench, turning them 1/4 TURN to the
right as shown. Turn the treadmill on and check for
slipping. Repeat if necessary, but NEVER TURN the
roller bolts more than 1/4 turn at a time. Belt is properly
tensioned when the slipping sensation is gone.
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
Firmly grasp the back end of the treadmill. Carefully
lift the end of the treadmill deck into the upright
position until the foot lock latch engages and
securely locks the deck into position. Make sure the
deck is securely latched before letting go. To unfold,
firmly grasp the back end of the treadmill. Gently
press down on the foot lock latch with your foot until
the lock latch disengages. Carefully lower the deck
to the ground. NOTE: The foot lock latch is located
on the bottom right side of the deck.
CAUTION: Running belt should NOT be moving during
tensioning. Over-tightening the running belt can
cause excessive wear on the treadmill as well as its
components. Never over-tighten the belt.
CENTERING THE RUNNING BELT
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment. Before operating the
treadmill, make sure the belt is centered and remains
centered to maintain smooth operation.
TREADMILL
OPERATION
TREADMILL
OPERATION
FOLDING
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment.
CAUTION: Do not run belt faster than 1/2 mph while
centering. Keep fingers, hair and clothing away from
belt at all times.
If the running belt is too far to the right side:
CONDITIONING
GUIDELINES
MOVING
Your treadmill has a pair of transport wheels built
into the frame. To move, make sure the treadmill is
folded and securely latched. Then firmly grasp the
handlebars, tilt the treadmill back and roll.
Belt is too far to the right side
With the treadmill running at 1/2 mph, turn the right
adjustment bolt clockwise 1/4 turn at a time (using
the supplied Allen wrench). Check the belt alignment.
Allow belt to run a full cycle to gauge if more adjustment
is needed. Repeat if necessary, until the belt remains
centered during use.
CONDITIONING
GUIDELINES
ASSEMBLY
WARNING
Do not operate the treadmill if the power cord or plug is damaged.
If the treadmill appears to not be working properly, do not use the treadmill.
­TENSIONING THE RUNNING BELT
TROUBLESHOOTING
& MAINTENANCE
TROUBLESHOOTING
& MAINTENANCE
IMPORTANT
PRECAUTIONS
Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in
small increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When
not in use, remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow
the MAINTENANCE schedule located on page 33 in this manual. Keep your body and head facing forward. Do not
attempt to turn around or look backwards while the treadmill is running. Stop your workout immediately if you
feel pain, faint, dizzy or are short of breath.
If the running belt is too far to the left side:
WARNING
LIMITED
WARRANTY
16
T92_Rev.1.2.indd 16-17
Our Treadmills are heavy, use care and additional help if necessary when moving.
Do not attempt to move or transport treadmill unless it is in the upright, folded
position with the lock latch secured. Failure to follow these instructions could
result in injury.
Belt is too far to the left side
With the treadmill running at 1/2 mph, turn the right
adjustment bolt counter-clockwise 1/4 turn at a time
(using the supplied Allen wrench). Check the belt
alignment. Allow belt to run a full cycle to gauge if more
adjustment is needed. Repeat if necessary, until the
belt remains centered during use.
17
LIMITED
WARRANTY
INTRODUCTION
PROPER USAGE
6/10/08 8:40:52 AM
S
L
M
Q
A
E
N
INTRODUCTION
IMPORTANT
PRECAUTIONS
IMPORTANT
PRECAUTIONS
R
R
ASSEMBLY
ASSEMBLY
INTRODUCTION
MONITOR DISPLAY
T R E A D M I L L O PERATION
Time • Shown as Minutes:Seconds. View the time remaining or the time elapsed in your workout.
HEART RATE • Shown as Beats Per Minute. Used to monitor your heart rate (displayed when contact is made
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
with both pulse grips.)
Distance • Shown as Miles. Indicates distance remaining or traveled during your workout.
Calories • Total Calories remaining or burned during your workout.
F
T
D
U
O
J
B
I
V
G
P
TREADMILL
OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
A) Monitor Display: Time, Pulse, Distance, Calories and Program Profiles.
B) Stop: Press to pause/end your workout. Hold for 3 seconds to reset the treadmill.
C) START/PAUSE: Simply press to begin exercising; press again to pause your workout.
D) ARROW KEYS: Used to scroll through programming options such as Incline, Speed, Time and Distance.
E) ENTER: Press to confirm the selected Goal, Terrain, Speed and Incline.
F) Fan Button: Turns fan on or off.
G) Quick adjust Incline / SPEED Keys: Used to reach desired Incline / Speed more quickly. Press after SET
SPEED or SET INCLINE confirm keys.
H) Incline ARROW Keys: Used to adjust incline in small increments (0.5% increments).
I) Speed ARROW Keys: Used to adjust speed in small increments (0.1 mph increments).
J) TERRAIN PROGRAM KEYS: Press to select Manual, Intervals, Hills, or Weight Loss Terrain.
K) CUSTOM PROGRAM: Press this button to workout to your custom saved program.
L) GOAL PROGRAM KEY: Press to select a time, distance or calorie goal.
M) Incline LCD DISPLAY: Illuminate to indicate current incline.
N) SPEED LCD DISPLAY: Illuminate to indicate current speed.
O) Fan: Personal workout fan.
P) Water Bottle holder: Holds personal workout equipment.
Q) Reading Rack: Holds reading materials.
R) SPEAKERS: Music plays through speakers when your CD / MP3 player is connected to the console.
S) AUDIO IN: Plug your CD / MP3 player into the console using the included audio adaptor cable.
T) AUDIO OUT / HEADPHONE JACK: Plug your headphones into this jack to listen to your music through the
headphones. NOTE: When headphones are plugged into the headphone jack the sound will no longer come out
through the speakers.
U) Safety Key Position: Enables treadmill when safety key is inserted.
V) CHANGE DISPLAY: Press to change feedback display.
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
18
T92_Rev.1.2.indd 18-19
Program profiles • Represents the profile of the program being used (speed during speed based
programs and incline during incline based programs).
TREADMILL
OPERATION
C
HEART RATE
PULSE GRIPS
CONDITIONING
GUIDELINES
H
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart
rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When gripping
the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Keep a loose,
cupping hold. You may experience an erratic readout if consistently holding the grip pulse handlebars. Make sure
to clean the pulse sensors to ensure proper contact can be maintained.
TROUBLESHOOTING
& MAINTENANCE
K
IMPORTANT: The heart rate function on this product is not a medical device. While heart rate grips can provide
a relative estimation of your actual heart rate, they should not be relied on when accurate readings are necessary.
Some people, including those in a cardiac rehab program, may benefit from using an alternate heart rate monitoring
system like a chest or wrist strap. Various factors, including movement of the user, may affect the accuracy of your
heart rate reading. The heart rate reading is intended only as an exercise aid in determining heart rate trends in
general. Please consult your physician.
19
LIMITED
WARRANTY
P
6/10/08 8:40:53 AM
ASSEMBLY
1) Quick start up
Simply press the start key to begin working out. TIME, DISTANCE, and CALORIES will
all count up from zero. OR...
2) SELECT A GOAL
Select a GOAL using the GOAL PROGRAM KEYS.
Adjust the goal settings using the arrow keys.
Press enter to advance.
BEFORE
YOU BEGIN
) SELECT A TERRAIN
Select a TERRAIN using the TERRAIN PROGRAM KEYS.
Press start to begin workout.
INTRODUCTION
GOAL 1: TIME
IMPORTANT
PRECAUTIONS
Check to make sure nothing is on or will hinder the movement of the treadmill.
Plug in the power cord and turn the treadmill ON.
Stand on the side rails of the treadmill.
Attach the safety key clip to part of your clothing.
Insert the safety key into the safety keyhole in the console.
You have two options to start your workout:
Allows user to set a goal based on how long they would like to workout. Time goals can range
from 15:00 – 99:00. TIME will count down. DISTANCE and CALORIES will count up from zero.
GOAL 2: DISTANCE
ASSEMBLY
IMPORTANT
PRECAUTIONS
1)
2)
)
)
)
)
PROGRAM INFORMATION
Allows user to set a goal based on a distance they would like to complete. Distance goal can range from
0.25 – 26.25 miles. DISTANCE will count down. TIME and CALORIES will count up from zero.
GOAL 3: CALORIES
BEFORE
YOU BEGIN
INTRODUCTION
G E T T I N G S TA R T E D / S E L E C T I N G A P R O G R A M
Allows user to set a goal based on the number of calories they would like to burn. Calories goal can range
from 20 – 980 calories. CALORIES will count down. TIME and DISTANCE will count up from zero.
TREADMILL
OPERATION
TREADMILL
OPERATION
NOTE: If no Goal or no Terrain is selected, program will function as a manual program. All changes in
speed and incline will need to be from the user in this setting.
Finishing YOUR WORKOUT
When your workout is complete, the monitor display will flash and beep. Your workout information
will stay displayed on the console for 30-45 seconds and then reset.
LIMITED
WARRANTY
20
T92_Rev.1.2.indd 20-21
21
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
CLEAR CURRENT SELECTION
To clear the current workout selection or screen, hold the Stop button for 3-5 seconds.
6/10/08 8:40:54 AM
SELECTING CUSTOM PROGRAM
IMPORTANT
PRECAUTIONS
Walk or run a series of alternating SPEED and INCLINE levels. The table below displays the default program
profile. Adjusting the speed and/or incline during your workout will affect the program speed and incline
accordingly for each program segment.
Program Segments
WARM-UP
1
2
Time
4:00 minutes
90 seconds
30 seconds
Speed
1
1.5
2
4
Incline
1
1.5
0.5
1.5
1) Press CUSTOM PROGRAM.
2) Press SELECT GOAL BUTTON to select TIME, DISTANCE, or CALORIES goal. The LED will light up next to the
IMPORTANT
PRECAUTIONS
T E R R A I N 1 : I N T E R VA L S
SEGMENT
INTRODUCTION
PROGRAM INFORMATION
ASSEMBLY
GOAL selected. Press ENTER to select desired GOAL.
) Set each SPEED PROFILE by using the UP/DOWN ARROWS and press ENTER. Repeat for all
15 SPEED PROFILES.
) Set each INCLINE PROFILE by using the UP/DOWN ARROWS and press ENTER. Repeat for all 15
INCLINE PROFILES.
) Press START to begin.
ASSEMBLY
INTRODUCTION
P R O G R A M I N F O R M AT I O N
(Speed and Incline changes, segments 1-2 repeat 90 seconds and 30 seconds until goal is complete.)
TERRAIN 2: HILLS
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
Motivates with different combinations of INCLINE. The table below displays the default program profile.
Adjusting the incline during your workout will affect the program intensity resulting in the incline changing
accordingly for each program segment.
Program Segments
SEGMENT
Time
Incline
WARM-UP
1
2
3
4
5
6
7
8
4:00 minutes
30 sec
30 sec
30 sec
30 sec
30 sec
30 sec
30 sec
30 sec
2
2.5
3
3.5
4
3.5
3
2.5
1
1.5
TERRAIN 3: WEIGHT LOSS
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
Challenges with various combinations of SPEED and INCLINE changes to help you achieve your weight loss
goal. Adjusting the speed and/or incline during your workout will affect the program intensity resulting in the
speed and incline changing accordingly for each program segment.
Program Segments
SEGMENT
Time
WARM-UP
1
2
3
4
5
6
7
8
4:00 minutes
30 sec
30 sec
30 sec
30 sec
30 sec
30 sec
30 sec
30 sec
1.5
1.5
1.0
0.5
0.5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
3.5
3.0
2.5
Incline
0.0
0.5
Speed
1.0
1.5
TROUBLESHOOTING
& MAINTENANCE
TROUBLESHOOTING
& MAINTENANCE
(Segments 1-8 repeat until set goal is reached.)
NO TERRAIN: MANUAL
When NO TERRAIN is scrolling in brickyard MANUAL is chosen terrain.
LIMITED
WARRANTY
22
T92_Rev.1.2.indd 22-23
23
LIMITED
WARRANTY
TREADMILL
OPERATION
TREADMILL
OPERATION
(Segments 1-8 repeat until set goal is reached.)
6/10/08 8:40:55 AM
HOW HARD? (Intensity of Workouts)
TREADMILL
OPERATION
How hard you workout is also determined by your goals. If you use your treadmill to prepare for a 5K run, you will
probably work out at a higher intensity than if your goal is general fitness. Regardless of your long term goals,
always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial!
There are two ways to measure your exercise intensity. The first is by monitoring your heart rate (using the grip
pulse handlebars or a wireless chest transmitter - may be sold separately), and the second is by evaluating your
perceived exertion level (this is simpler than it sounds!).
CONDITIONING
GUIDELINES
PERCEIVED EXERTION LEVEL
TROUBLESHOOTING
& MAINTENANCE
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.
Always be aware of these warning signs of overexertion.
INTRODUCTION
IMPORTANT
PRECAUTIONS
75
60
%
%
15
12
0
0
AGE
14
6
14
ASSEMBLY
0%
3
T A 139 1
35
R
11
7
G E 131
11
4
T
11
1
10
8
12
8
12
4
12
Z
0
O
10
5
NE
10
2
9
9
20
25
30
35
40
45
50
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session.
But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may
be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective. A workout time of 48 minutes or more is recommended for best weight loss results.
10
55
97
60
11
6
93
TREADMILL
OPERATION
HOW LONG? (Duration of Workouts)
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
65
CONDITIONING
GUIDELINES
ASSEMBLY
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!
Example:
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Hear Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
TROUBLESHOOTING
& MAINTENANCE
HOW OFTEN? (Frequency of Workouts)
What is Target Heart Rate Zone?
Always consult your physician before beginning an exercise program.
LIMITED
WARRANTY
24
T92_Rev.1.2.indd 24-25
25
LIMITED
WARRANTY
IMPORTANT
PRECAUTIONS
Always consult your physician before beginning an exercise program.
TARGET HEART RATE ZONE CHART
BEATS PER MINUTE
INTRODUCTION
C O N D I T I O N ING GUIDELINES
6/10/08 8:40:56 AM
ASSEMBLY
1. STANDING CALF MUSCLE STRETCH
BEFORE
YOU BEGIN
Stand near a wall with the toes of your left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
INTRODUCTION
WARM UP
IMPORTANT
PRECAUTIONS
Before using your product, it is best to take a few minutes doing a few gentle stretching exercises.
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into
each of these stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to
bounce while doing these stretches.
THE IMPORTANCE OF WARM UP & COOL DOWN
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.
COOL DOWN
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
TIPS
ASSEMBLY
IMPORTANT
PRECAUTIONS
STRETCH FIRST
TIPS
ACHIEVING YOUR FITNESS GOALS
BEFORE
YOU BEGIN
STRETCHING
An important step in developing a long term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful exercise program. Below are some
common exercise goals:
CONDITIONING
GUIDELINES
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
TROUBLESHOOTING
& MAINTENANCE
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
TREADMILL
OPERATION
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short term goals are easier to achieve. Your console provides you with several readouts that can
be used to record your progress. You can track Distance, Calories or Time.
CONDITIONING
GUIDELINES
Using a wall to provide balance, grasp your right ankle
with your right hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your left ankle
and hand.
KEEPING AN EXERCISE DIARY
TROUBLESHOOTING
& MAINTENANCE
TREADMILL
OPERATION
2. STANDING QUADRICEP STRETCH
To make your personal exercise log book, photocopy the weekly and monthly log sheets, which are located
on the following pages, or you can print them off of your computer by going to:
www.horizonfitness.com/guides/weeklylog.pdf
www.horizonfitness.com/guides/monthlylog.pdf
LIMITED
WARRANTY
As your fitness improves, you can look back and see how far you’ve come!
26
T92_Rev.1.2.indd 26-27
27
LIMITED
WARRANTY
INTRODUCTION
TIPS
6/10/08 8:40:58 AM
TIME
COMMEN T S
D AY
D AT E
SUNDAY
M O N D AY
MONDAY
T U E S D AY
TUESDAY
W E D N E S D AY
WEDNESDAY
T H U R S D AY
THURSDAY
F R I D AY
FRIDAY
S AT U R D AY
SATURDAY
W E E K LY T O TA L S :
WEEKLY TOTALS :
BEFORE
YOU BEGIN
WEEK #
D AY
WEEKLY GOAL
DATE
DISTANCE
CALORIES
TIME
WEEK #
COMMEN T S
D AY
D AT E
TREADMILL
OPERATION
SUNDAY
M O N D AY
MONDAY
T U E S D AY
TUESDAY
W E D N E S D AY
WEDNESDAY
T H U R S D AY
THURSDAY
F R I D AY
FRIDAY
S AT U R D AY
SATURDAY
W E E K LY T O TA L S :
WEEKLY TOTALS :
CONDITIONING
GUIDELINES
D AY
WEEKLY GOAL
DATE
DISTANCE
CALORIES
TIME
D AY
D AT E
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
SUNDAY
M O N D AY
MONDAY
T U E S D AY
TUESDAY
W E D N E S D AY
WEDNESDAY
T H U R S D AY
THURSDAY
F R I D AY
FRIDAY
S AT U R D AY
SATURDAY
W E E K LY T O TA L S :
WEEKLY TOTALS :
T92_Rev.1.2.indd 28-29
INTRODUCTION
COMMENTS
CALORIES
TIME
COMMENTS
WEEKLY GOAL
S U N D AY
28
D I S TA N C E
WEEK #
COMMEN T S
TIME
WEEKLY GOAL
S U N D AY
WEEK #
CALORIES
TREADMILL
OPERATION
ASSEMBLY
S U N D AY
D I S TA N C E
IMPORTANT
PRECAUTIONS
CALORIES
ASSEMBLY
DISTANCE
WEEKLY GOAL
BEFORE
YOU BEGIN
DATE
WEEK #
CONDITIONING
GUIDELINES
D AY
WEEKLY GOAL
D I S TA N C E
CALORIES
TIME
COMMENTS
TROUBLESHOOTING
& MAINTENANCE
IMPORTANT
PRECAUTIONS
WEEK #
WEEKLY LOG SHEETS
29
LIMITED
WARRANTY
INTRODUCTION
W E E K LY L O G S HEETS
6/10/08 8:40:59 AM
IMPORTANT
PRECAUTIONS
MONTH
WEEK #
D ISTANCE
MONTHLY GOAL
CALORIES
TIME
INTRODUCTION
COMMON PRODUCT QUESTIONS
IMPORTANT
PRECAUTIONS
INTRODUCTION
TROUBLESHOOTING
M O N T H LY L O G SHEETS
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new
treadmills. This noise will diminish over time, although may not totally go away. Over time, the belt will
stretch, causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I PURCHASED LOUDER THAN THE ONE AT THE STORE?
M O N T H LY T O TA L S :
ASSEMBLY
ASSEMBLY
All fitness products seem quieter in a large store showroom because there is generally more background noise
than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood overlay
floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness product is
placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
TROUBLESHOOTING - TREADMILL
TIME
Your treadmill is designed to be reliable and easy to use. However, if you experience a problem, please reference the
troubleshooting guide listed below.
TREADMILL
OPERATION
L IF T
PROBLEM: If you have attempted to
move the treadmill from the box and
the machine has sprung open and
cannot be assembled.
TREADMILL
OPERATION
D ISTANCE
MONTHLY GOAL
CALORIES
SOLUTION: The air shocks have been engaged prematurely. To correct this, tilt the machine on its nose by lifting
M O N T H LY T O TA L S :
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
the deck (light end) upwards. Fold down the deck so that it is horizontal. You may now proceed with the assembly.
PROBLEM: The console does not light up and/or the belt does not move.
SOLUTION: Verify the following:
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
M O N T H LY T O TA L S :
30
T92_Rev.1.2.indd 30-31
D ISTANCE
MONTHLY GOAL
CALORIES
TIME
Does the red light on the ON/OFF switch light up?
If yes:
• Double check that all connections are secure, especially the console cable. Unplug and reconnect the console
cable to verify.
• Make sure the console cable is not pinched or damaged in any way.
• Turn the power off, unplug the power cable and wait 60 seconds. Remove motor cover. Wait until all red LED
lights have gone off on the motor control board before proceeding. Next, verify that none of the wires connected
to the lower board are loose or disconnected.
If no:
• Verify that the outlet the machine is plugged into is functional. Double check that the breaker has not tripped,
it is on a dedicated 20-amp circuit, it is not on a GFCI-equipped outlet, and it is not plugged into a power
strip/surge protector or extension cord.
• The power cord is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position.
TROUBLESHOOTING
& MAINTENANCE
MONTH
WEEK #
31
LIMITED
WARRANTY
BEFORE
YOU BEGIN
MONTH
WEEK #
BEFORE
YOU BEGIN
As long as the sounds your treadmill makes are no louder than a normal conversational tone of voice, it is
considered normal noise.
6/10/08 8:41:00 AM
WARNING
DO NOT stand on running belt while
BEFORE
YOU BEGIN
calibrating – stand on the guide
rails. Treadmill will fluctuate between
low and high speeds for several
minutes until calibration is complete.
TROUBLESHOOTING - HEART RATE
Check your exercise environment for sources of interference such as fluorescent lights, computers, underground fencing, home
security systems or appliances containing large motors. These items may cause erratic heart rate readouts.
TREADMILL
OPERATION
You may experience an erratic readout under the following conditions:
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the heart rate handlebars.
• Constant movement and vibration due to constantly holding the heart rate handlebars while exercising. If you are receiving
erratic heart rate readouts, try to only hold the grips long enough to monitor your heart rate.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try to moisten your palms by rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palm is especially thick.
CONDITIONING
GUIDELINES
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.
PLEASE CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
TROUBLESHOOTING
& MAINTENANCE
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
LIMITED
WARRANTY
In order for Customer Tech Support to service your treadmill they may need to ask detailed questions about the symptoms that are
occurring. Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front or the back? What kind of noise is it (thumping, grinding, squeaking,
chirping etc.)?
• Has the machine been lubricated and maintained per the maintenance schedule?
32
T92_Rev.1.2.indd 32-33
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service necessary
to get you and your Horizon Fitness treadmill running again!
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
ASSEMBLY
• Power on the treadmill and have the safety key in position on the
console. Press and hold the elevation “+” and speed “-” buttons for
approximately 5 seconds to enter the Engineering Mode. The console
will beep and “ENG0” appears in the display.
• Press the Speed “+” or “-” button until “ENG2” appears in the display.
• Press, “ENTER” to select. Press, “START” to begin. The treadmill
running belt will begin to move automatically and the auto-calibration
sequence will properly set and store the speed values.
• Upon successful calibration, the treadmill will beep several times. The
console will automatically exit Engineering Mode and return to the
start-up screen.
EVERY WEEK
Clean underneath the treadmill, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Fold the treadmill into the upright position, making sure that the lock latch is secure.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.
• Return the treadmill to its previous position.
BEFORE
YOU BEGIN
PROBLEM: Operating speed appears inaccurate.
SOLUTION: Auto-calibrate the treadmill:
AFTER EACH USE (DAILY)
Clean and inspect, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use solvents, as they
can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage any other
components on the treadmill by being misaligned.
EVERY MONTH - IMPORTANT!
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Inspect all assembly bolts of the machine for proper tightness.
• Turn off the treadmill and wait 60 seconds.
• Remove the motor cover. Wait until all display screens turn off.
• Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated. Failure to
do so may result in premature failure of key electrical components.
• Vacuum and wipe down the belt with a damp cloth. Vacuum any black/white particles that may accumulate around
the unit. These particles may accumulate from normal treadmill use.
EVERY 6 MONTHS OR 150 MILES
It is necessary to lubricate your treadmill running deck every six months or
150 miles to maintain optimal performance. Once the treadmill reaches 150
miles, the console will display the message “LUBE” or “LUBE BELT”. The
treadmill will not operate while the message is showing. Hold Stop for 5
seconds to suspend message for 5 miles. Your treadmill came with a bottle
of lubricant which can be used for two applications. If you need lubricant,
contact Horizon Fitness. Only use lubricant provided by Horizon Fitness.
TREADMILL
OPERATION
• Make sure the treadmill is on a level surface.
• Verify that the belt is properly tightened and centered (Refer to the Adjustment section for detailed directions).
Cleanliness of your treadmill and its operation environment will keep maintenance problems and service calls to a
minimum. For this reason, we recommend that the following preventive maintenance schedule be followed.
LUB R I C AT I O N
• Turn off the treadmill with the on/off switch, then unplug the power
cord at the wall outlet.
• Loosen both the rear roller bolts. (For best results, place two removable
marks on both sides of the frame and note roller position). Once the
belt is loosened, take the bottle of lubricant and apply it to the entire
top surface of the running deck. Tighten both rear roller bolts
(matching up the marks for proper position) to original position. After
you have applied lubricant, plug in the power cord, insert the safety
key, start the treadmill and walk on the belt for two minutes to spread
the lubricant.
• Lubricate the air shocks with Teflon based spray.
• Once lubrication is complete, reset the console by pressing and holding
‘STOP’ and Speed ‘+’ buttons for 5 seconds.
CONDITIONING
GUIDELINES
IMPORTANT
PRECAUTIONS
PROBLEM: The running belt does not stay centered during a workout.
SOLUTION: Verify the following:
MAINTENANCE
RUNNING BELT
RUNNING DECK
TROUBLESHOOTING
& MAINTENANCE
• Make sure the treadmill is plugged into a dedicated 20-amp circuit.
• Verify that you do not have the machine on an extension cord or surge protector.
• Confirm that the machine is not plugged into a GFCI-equipped outlet or on a circuit that has a GFCI‑equipped outlet on it.
Please contact Horizon Fitness with questions about applying lubricant to your treadmill.
33
LIMITED
WARRANTY
INTRODUCTION
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify the following:
6/10/08 8:41:00 AM
INTRODUCTION
L I M I T E D H OME-USE WARRANTY
T92 Weight Capacity = 300 LBS
IMPORTANT
PRECAUTIONS
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in
workmanship and materials for the lifetime of the original
owner. (The frame is defined as the welded metal base of the
unit and does not include any parts that can be removed.)
ASSEMBLY
MOTOR • LIFETIME
Horizon Fitness warrants the motor against defects in
workmanship and materials for the lifetime of the original
owner.
ELECTRONICS & PARTS • 1 YEAR
Horizon Fitness warrants the electronic components, finish
and all original parts for a period of one year from the date
of original purchase, so long as the device remains in the
possession of the original owner.
BEFORE
YOU BEGIN
LABOR • 1 YEAR
Horizon Fitness shall cover the labor cost for the repair
of the device for a period of one year from the date of the
original purchase, so long as the device remains in the
possession of the original owner.
EXCLUSIONS AND LIMITATIONS
TREADMILL
OPERATION
Who IS covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic component,
or defective part and is the sole remedy of the warranty.
CONDITIONING
GUIDELINES
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or
installation of parts or accessories not originally intended or
compatible with the equipment as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration
of paint or plastic, neglect, theft, vandalism, fire, flood, wind,
lightning, freezing, or other natural disasters of any kind, power
reduction, fluctuation or failure from whatever cause, unusual
atmospheric conditions, collision, introduction of foreign objects
into the covered unit, or modifications that are unauthorized or not
recommended by Horizon Fitness.
• Incidental or consequential damages. Horizon Fitness is not
responsible or liable for indirect, special or consequential damages,
economic loss, loss of property, or profits, loss of enjoyment or use,
or other consequential damages of whatsoever nature in connection
with the purchase, use, repair or maintenance of the equipment.
• Equipment used for commercial purposes or any use other than a
single family or Household, unless endorsed by Horizon Fitness for
coverage.
• Equipment owned or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement
units or labor or other costs associated with removal or replacement
of the covered unit.
• Any attempt to repair this equipment creates a risk of injury.
Horizon Fitness is not responsible or liable for any damage, loss or
liability arising from any personal injury incurred during the course
of, or as a result of any repair or attempted repair of your fitness
equipment by other than an authorized service technician. All
repairs attempted by you on your fitness equipment are undertaken
AT YOUR OWN RISK and Horizon Fitness shall have no liability for
any injury to the person or property arising from such repairs.
TROUBLESHOOTING
& MAINTENANCE
SERVICE/RETURNS
• In-home service is available within 150 miles of the nearest
authorized repair center (Mileage beyond 150 miles from an
authorized service center is the responsibility of the consumer).
• All returns must be pre-authorized by Horizon Fitness.
• Horizon Fitness’ obligation under this warranty is limited to
replacing or repairing, at Horizon Fitness’ option, the same or
comparable model at one of its authorized service centers.
• A Horizon Fitness authorized service center must receive all
equipment for which a warranty claim is made. This equipment
must be received with all freight and other transportation charges
prepaid, accompanied by sufficient proof of purchase.
• Replacement units, parts and electronic components reconditioned
to As-new Condition by Horizon Fitness or its vendors may
sometimes be supplied as warranty replacement and constitute
fulfillment of warranty terms.
• This warranty gives you specific legal rights, and your rights may
vary from state to state.
LIMITED
WARRANTY
34
T92_Rev.1.2.indd 34-35
6/10/08 8:41:01 AM
C U S T O MER TECH SUPPORT
DO NOT RETURN TO THE RETAILER
if you have any problems during
assembly or if parts are missing.
For fast and friendly service, please contact one of our
trained customer technicians via phone, email or our website.
Customer Tech Support Hotline: 1-800-244-4192
Email: comments@horizonfitness.com
Website: www.horizonfitness.com
Every employee at Horizon Fitness takes pride in providing you with a high quality product.
We want to know if you have a problem and we want to have an opportunity to correct it for you.
Note: Please read the troubleshooting section before contacting Customer Tech Support.
To receive additional product information, visit us at www.horizonfitness.com
1620 Landmark Drive,
Cottage Grove WI, 53527
Tel: 1.800.244.4192
MAY BE COVERED BY ONE OR MORE
PATENTS OR PATENTS PENDING
US 6273843
TW 494765
CN 03206094.7
US 6682460
TW 586429
US 7104930
CN 01230904.4
T92: Rev. 1.2 | © 2008 Horizon Fitness Products | Designed & Engineered in the U.S.A. | Made in China
T92_Rev.1.2.indd 36
6/10/08 8:41:02 AM