Operating instructions | Ariston fm81r ix aus Oven User Manual

OK
OK
OK
OK
OK
OK
997E LDP X AUS S
997E LDP AUS S
999E LDP AUS S
999E LDP X AUS S
999EL S D P X AUS
999EL S D P AUS
English
Operating Instructions
OVEN
Contents
Operating Instructions,1
Warnings,2
Assistance,3
Description of the appliance,4
Installation,6
Electrical Connection,7
Oven structure,8
Start-up and use,9
Cooking modes,10
Precautions and tips,17
Maintenance and care,17
Troubleshooting,20
AUS
Warnings
WARNING: The appliance and its
accessible parts become hot during use.
Care should be taken to avoid touching
heating elements. Children less than 8
years of age shall be kept away unless
continuously supervised. This appliance
can be used by children aged from 8 years
and above and persons with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.
Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the oven door
glass since they can scratch the surface,
which may result in shattering of the glass.
“Before initiating the automatic cleaning
cycle:
• clean the oven door;
• remove large or coarse food residues
from the inside of the oven using a
damp sponge. Do not use detergents;
• remove all accessories and the sliding
rack kit (where present);
• do not place tea towels”
Keep children away from the appliance
during the automatic cleaning cycle as
surfaces may become very hot.
Never use steam cleaners or pressure
cleaners on the appliance.
WARNING: Ensure that the appliance is
switched off before replacing the lamp to
avoid the possibility of electric shock
! When you place the rack inside, make
sure that the stop is directed upwards and
in the back of the cavity.
2
AUS
Assistance
! Never use the services of an unauthorised technician.
Please have the following information to hand:
• The type of problem encountered.
• The appliance model (Mod.).
• The serial number (S/N).
The latter two pieces of information can be found on the
data plate located on the appliance.
ARISTON
PRIORITY SERVICE
GENUINE ACCESSORIES
& SPARE PARTS
††
”
•
•Š•
••
••
••••
AUSTRALIA
ARISIT PTY LIMITED
-€--‚ƒ
„
ˆ‰Š…
‹ Œ‡ Ž‡•••Š•
‘
’“’
••••
…„†‡…
NEW ZEALAND
ARISIT PTY LIMITED
•–
Œ•€-•…
ƒ
-…••
‹ Œ••• ŠŠ
‘“
’ ’—
3
AUS
Description of the appliance
Overall view
1.POSITION 1
2.POSITION 2
3.POSITION 3
4.POSITION 4
5.POSITION 5
6.DIVIDER “D” POSITION
7.POSITION 6
8.POSITION 7
9.GUIDES for the sliding racks
10. DRIPPING PAN
11. RACK shelf
12. DIVIDER shelf
13. Control panel
9
13
8
12
7
6
11
5
10
3
4
2
1
4
Control panel
AUS
14. SELECTOR knob
15. CONTROL PANEL POWER icon
16. DISPLAY
17. THERMOSTAT / TIMER knob
18. START / STOP
19. MINUTE MINDER icon
20. TIMER icon
21. DOOR / CONTROL PANEL LOCK icon
22. FAST CLEAN icon
23. SELECT CAVITY icon
24. LIGHT icon
14
15
16
17
24 23 22 21 20 19
18
Display
25. SMALL CAVITY icon
26. CAVITY TEMPERATURE display
27. CONTROL PANEL LOCK indicator
28. TIME display
29. DURATION icon
30. END OF COOKING icon
31. CLOCK icon
32. MINUTE MINDER icon
33. DOOR LOCK indicator
34. CAVITY PREHEATING / RESIDUAL HEAT indicator
35. MAIN CAVITY icon
36. MODE icons
25
26
27
28
29
30
31
36
35
34
33
32
5
Ventilation
Installation
! Please keep this instruction booklet in a safe place for
future reference. If the appliance is sold, given away or
moved, please make sure the booklet is also passed on to
the new owners so that they may benefit from the advice
contained within it.
To ensure adequate ventilation, the
back panel of the cabinet must be
removed. It is advisable to install
the oven so that it rests on two
strips of wood, or on a completely
flat surface with an opening of at
least 45 x 560 mm (see diagrams).
! Please read this instruction manual carefully: it contains
important information concerning the safe operation,
installation and maintenance of the appliance.
Positioning
! Do not let children play with the packaging material; it
should be disposed of in accordance with local separated
waste collection standards (see Precautions and tips).
! The appliance must be installed by a qualified professional
in accordance with the instructions provided. Incorrect
installation may damage property or cause harm to people
or animals.
Built-in appliances
Use an appropriate cabinet to ensure that the appliance
operates properly:
• The panels adjacent to the oven must be made of heatresistant material.
560
mm
.
min. 20 mm
45 m
m.
FAN ASSISTED
MODE
min. 45 mm
Centring and fixing
Secure the appliance to the cabinet:
• Open the oven door.
• Slide out the side gaskets at the top until the 2 fixing
holes are exposed;
• Fix the oven to the cabinet using the 2 wood screws.
• Reposition the 2 gaskets.
• Cabinets with a veneer exterior must be assembled with
glues which can withstand temperatures of up to 100°C.
20 mm.
.
mm
550 in.
m
.
570 mm.
m
45 m
595
mm
.
560
mm
.
575-585 mm.
• To install the oven under the counter (see diagram) or
in a kitchen unit, the cabinet must have the following
dimensions:
590 mm.
AUS
.
mm
550
.
m
5 m .*
20, mm
5
,
2
2
* Stainless steel models only
! The appliance must not come into contact with electrical
parts once it has been installed.
The indications for consumption given on the data plate
have been calculated for this type of installation.
6
! All parts which ensure the safe operation of the appliance
must not be removable without the aid of a tool.
Electrical Connection
The electrical connection to the mains must be made on
the appliance. The power voltage and frequency are as
indicated on the rating plate.
! THIS APPLIANCE MUST BE EARTHED.
Fitting the power supply cable
L
N
1. Open the terminal board
by inserting a screwdriver
into the side tabs of the
cover. Use the screwdriver
as a lever by pushing it
down to open the cover (see
diagram)
.
2. Install the power supply
cable by loosening the
cable clamp screw and the
three wire contact screws
L-N.
Connect the wires to the
corresponding terminals:
the Blue wire to the terminal
marked (N), the Brown wire
to the terminal marked (L)
and the Yellow/Green wire
to the terminal marked
(see diagram).
3. Secure the cable by fastening the clamp screw.
4. Close the cover of the terminal board.
Connecting the power supply cable to the electricity
mains
Install a standardised plug corresponding to the load
indicated on the data plate (see opposite).
The appliance must be directly connected to the mains using
an omnipolar switch with a minimum contact opening of 3
mm installed between the appliance and the mains. The
switch must be suitable for the charge indicated and must
comply with current electrical regulations (the earthing wire
must not be interrupted by the switch). The supply cable
must be positioned so that it does not come into contact
with temperatures higher than 50°C at any point (the back
panel of the oven, for example).
! The installer must ensure that the correct electrical
connection has been performed and that it is fully compliant
with safety regulations.
Before connecting the appliance to the power supply, make
sure that:
• The appliance is earthed and the plug is compliant with
the law;
• The socket can withstand the maximum power of the
appliance, which is indicated on the data plate (see
below);
• The voltage is in the range between the values indicated
on the data plate (see below);
• The socket is compatible with the plug of the appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it. Do not use extension
cords or multiple sockets.
!Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should
these safety measures not be observed.
APPLIANCE SPECIFICATIONS
width 43.5 cm
Dimensions*
height 41 cm
depth 41 cm
Volume*
74 l
width 45.6 cm
Dimensions**
height 41 cm
depth 41 cm
Volume**
77 l
voltage: 220 - 240 V ~50 Hz
Electrical
maximum power absorbed
connections
3400 W (see data plate)
Directive 2002/40/EC on the
label of electric ovens.
Standard EN 50304
ENERGY LABEL
Declared energy consumption
for Forced convection
Class – heating mode:
ECO
This appliance conforms to the
following European Economic
Community directives:
2006/95/EEC dated 12/12/06
(Low Voltage) and subsequent
amendments – 2004/108/EEC
dated 15/12/04
(Electromagnetic
Compatibility) and subsequent
amendments - 93/68/EEC
dated 22/07/93 and
subsequent amendments.
2012/19/EEC and subsequent
amendments.
1275/2008 Stand-by/off mode
* Only for models with drawn rails.
** Only for models with wire rails.
7
AUS
AUS
Oven structure
The OPEN SPACE oven has a capacity of 70 litres and
offers users the option of cooking on 4 shelves at the same
time or cooking large quantities which would not necessarily
be possible in a traditional oven.
The 56 universal (Creation) and automatic (Success)
cooking modes guarantee perfect results every time,
regardless of the dish you are cooking.
OPEN SPACE also offers maximum comfort for all
requirements, with 4 different operating options: the oven
is one large compartment but can be divided into separate
spaces of various sizes, each with its own independent
temperature and duration controls.
This is made possible thanks to the heat-insulating
DIVIDER, which divides the whole ExtraLarge Space into
two different-sized spaces: the Main Space and the Small
Space.
The two Main and Small Space compartments may be used
at the same time to cook different dishes more quickly,
or they may be used separately so that only the space
necessary is used.
When the two compartments are used at the same time,
the cooking temperature of each may be adjusted to a
value between 30° and 300°. There may be a difference in
temperature of 100° between the two zones, which means it
is possible to cook very different dishes without any flavours
or aromas intermingling.
Main and Small Space: simultaneous operation
ExtraLarge Space: cooking on 4 shelf levels
RACK
EXTRALARGE
SPACE
RACK
RACK
DRIPPING PAN
Cooking using the Small Space only
SMALL
SPACE
RACK or DRIPPING PAN
Divider "D"
(fixed position)
MAIN
SPACE
The table below lists the possible temperature values which
may be set. The intelligent display will guide you through
Temperature in the first cavity
(Main or Small Space)
Between 40°C and 150°C
SMALL
SPACE
MAIN
SPACE
RACK or DRIPPING PAN
Divider "D" (fixed position)
RACK (cooking on 3 shelves)
RACK (cooking on 3 shelves)
DRIPPING PAN
(cooking on 3 shelves)
Cooking using the Main Space only: cooking on 3 shelf levels
SMALL
SPACE
MAIN
SPACE
Divider "D" (fixed position)
RACK (cooking on 3 shelves)
RACK (cooking on 3 shelves)
DRIPPING PAN
(cooking on 3 shelves)
the correct procedure used to adjust the temperature of
the two cavities.
Temperature in the second cavity
(Small or Main Space)
The temperature difference in relation to the first recess
selected is no greater than 50°C
For example: if you set one recess to 90°C,
you may set a value of between 40°C (90°C-50°C) and 140°C (90°C+50°C) for the other.
Between 155°C and 200°C
The temperature difference in relation to the first recess
selected is no greater than 70°C
For example: if you set one recess to 180°C,
you may set a value of between 110°C (180°C-70°C) and 250°C (180°C+70°C) for the other.
Between 205°C and 250°C
The temperature difference in relation to the first recess
selected is no greater than 100°C
For example: if you set one recess to 210°C,
you may set a value of between 110°C (210°C-100°C) and 250°C (maximum temperature setting) for the other.
8
for at least 2 seconds.
Start-up and use
WARNING! The oven is
provided with a stop system
to extract the racks and
prevent them from coming
out of the oven (1).
As shown in the drawing,
to extract them completely,
simply lift the racks, holding
them on the front part, and
AUS
! When cleaning the appliance, the door lock may be closed
accidentally (there is an exposed spring). If this happens,
reopen it by turning the door lock upwards (see figure).
KO
OK
pull (2).
! The first time you use your appliance, heat the empty oven
with its door closed at its maximum temperature for at least
half an hour. Make sure that the room is well ventilated
before switching the oven off and opening the oven door.
The appliance may emit a slightly unpleasant odour caused
by protective substances used during the manufacturing
process burning away.
! To make the setting process easier, keep the knob in “ ”
or “ ” position: this will increase the scrolling speed of the
numbers on the display.
! Each setting will automatically be stored in the appliance
memory after 10 seconds.
! During operation, we recommend the removal of any
crockery or delicate foodstuffs from the cavities not being
used.
Some models are equipped with a system of hinges which
allows the door to close slowly, without the user having to
follow the movement through with his/her hand. To use the
system correctly, before closing the door:
• Open the door fully.
• Do not force the closing movement manually.
! Once cooking has begun, before the DIVIDER is removed,
the oven must be switched off using the
icon.
! Every time the oven is switched on it is set to the
CREATION cooking mode.
! The touch controls cannot be activated if the user is
wearing gloves.
! In order to optimise the cooking performance, when
starting the selected function, product settings will be
applied that could cause a delayed start of the fan and
heating elements.
Control panel lock
! The control panel can be locked while the oven is off, once
cooking has started or finished and during programming.
To lock the oven controls, press and hold the
icon for at
least 2 seconds. A buzzer will sound and the display shows
the key symbol “n—O”. The
and
icons, when lit,
indicate lock function activation.
To deactivate the lock, press and hold the
icon again
Setting the clock
! The clock can only be set when the oven is switched off. If
the oven is in standby mode, pressing the
icon once will
display the current time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
icon and the digits on the TIME display
will flash for 10 seconds.
To set the clock:
1. Press the
icon.
2. Turn the TIMER knob towards “ ” and “ ” to adjust the
hour value.
3. Once you have reached the correct hour value, press
the
icon.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock.
If the
icon flashes on the display, this indicates that the
clock has not been set correctly.
Setting the minute minder
! The minute minder may be set regardless of whether the
oven is switched on or off. It does not switch the oven on or off.
When the set time has elapsed, the timer emits a buzzer
that will automatically stop after 30 seconds or when any
active button on the control panel is pressed.
To adjust the timer proceed as follows:
1. Press the
icon.
2. Turn the TIMER knob towards “ ” and “ ” to adjust the
hour value.
3. Once you have reached the desired value, press the
icon again.
The lit
symbol will remind you that the minute minder
is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the
the knob to set the time to 00:00. Press the
icon and use
icon again.
The
icon will switch off to indicate that the minute minder
has been disabled.
Cooling ventilation
In order to cool down the external temperature of the oven,
a cooling fan blows a stream of air between the control
9
AUS
panel and the oven door, as well as towards the bottom of
the oven door.At the beginning of the FAST CLEAN mode,
the cooling fan operates at low speed.
! Once the cooking has been completed, the cooling fan
remains on until the oven has cooled down sufficiently.
Oven light
The light comes on when the oven door is opened or when
a cooking mode starts.
When models featuring LED INSIDE technology begin
cooking, the LEDs on the door light up for improved
illumination of all cooking levels.
The
button can be used to switch on the light at any time.
Residual heat indicators
The appliance is fitted with a residual heat indicator. When
the oven is off, the “residual heat” light on the display comes
on to indicate high temperatures inside the oven cavity. The
indicator light switches off when the inside of the oven has
cooled down.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven, then
keep the SELECTOR knob turned while pressing the
icon for 6 seconds. Once the restore procedure is complete,
a buzzer will sound. The first time the
icon is pressed,
the oven will behave as if it is being switched on for the
first time.
Standby
This product complies with the requirements of the latest
European Directive on the limitation of power consumption
in standby mode. If no buttons are pressed for 30 minutes
and the control panel/door lock has not been activated,
the appliance automatically reverts to standby mode. The
standby mode is visualised by the high luminosity “Watch
Icon”. As soon as interaction with the machine resumes,
system operation is restored.
Cooking modes
! To guarantee perfectly soft or crispy food, the oven
releases water contained within the food in the form of
steam. This means it is possible to achieve optimal cooking
results for all dishes.
! Every time the oven is switched on, it suggests the first
CREATION cooking mode.
! Never put objects directly on the bottom of the oven; this
will prevent the enamel coating from being damaged.
! Always place cookware on the rack(s) provided.
ExtraLarge Space
! Do not use position “D” for racks.
10
Starting the oven
1. Switch the control panel on by pressing the
icon. The
appliance buzzer sounds three times (ascending) and all
buttons light up in sequence.
2. Select the desired cooking mode by turning the
SELECTOR knob. The TEMPERATURE display shows:
- the temperature associated with the mode, if programming
manually;
- “Auto”, if programming is automatic.
The TIME display shows:
- the current time, if programming manually;
- the duration, if programming is automatic.
3. Press the
icon to begin cooking.
4. The oven will begin its preheating stage: the preheating
light flashes.
5. When the preheating process has finished, a buzzer
sounds and the preheating indicator light shows that this
stage has been completed: the food can then be placed
in the oven.
6. During cooking it is always possible to:
- modify the temperature by turning the THERMOSTAT knob
(manual modes only);
- set the duration of a cooking mode (see Cooking Modes);
- press the
icon to stop cooking. In this case the
appliance stores the temperature modified previously in its
memory (manual modes only);
- switch off the oven by pressing the
icon for 3 seconds.
7. In case of a blackout, if the oven was already operating,
an automatic system within the appliance will reactivate
the cooking mode from where it was interrupted as long
as the temperature did not drop below a certain level.
Programmed cooking modes which have not yet started will
not be restored and must be reprogrammed (for example:
a cooking mode has been programmed to start at 20:30. At
19:30 a blackout occurs. When the power supply is restored,
the mode will have to be reprogrammed).
! There is no preheating stage for the BARBECUE mode.
! The oven will begin its preheating phase after 2 seconds
from selecting the desired cycle
CREATION cooking modes
! All cooking modes have a default cooking temperature
which may be adjusted manually to a value between 30°C
and 250°C as desired (300°C for GRILL mode). CREATION
cooking modes include all manual programmes.
The oven controls all essential aspects of each of these
cooking modes and makes it easier for you to create
the perfect dish, from the simplest recipe to the most
sophisticated culinary delights: the temperature, heat
source, humidity and fan assisted operation are all
controlled automatically.
This chapter was written with the help of our very own
culinary expert. We invite you to follow his advice so you can
benefit from his experience and perfect your cooking skills.
The recommended cooking modes, temperatures and
oven shelf heights reflect our expert’s own experience in
the kitchen and will help you achieve the very best results.
The table below specifies whether it is best to pre-heat your
oven or not for each CREATION cooking mode. Observing
these suggestions will guarantee perfect results.
If you wish to place food in a preheated oven, wait for the
preheating stage to be completed (this will be signalled by
a series of beeps).
The temperature is set automatically, according to the
cooking mode selected; however, you may adjust it to
suit your recipe.
You can also set a cooking duration with an immediate or
delayed start.
ECO mode
The rear heating element and the fan are switched on,
thus guaranteeing the distribution of heat in a delicate and
uniform manner throughout the entire oven. This energy
saving mode is suitable for cooking small dishes, reheating
meat and finishing off cooking processes.
Rotisserie spit*
To operate the rotisserie function (see diagram) proceed
as follows:
1. Place the dripping pan in
position 1.
2. Place the rotisserie
support in position 3 and
insert the spit in the hole
provided on the back panel
of the oven.
3. Start the rotisserie
function by selecting the
MULTILEVEL mode
All heating elements and the fan are activated. Since the
heat remains constant throughout the oven, the air cooks
and browns food in a uniform manner. A maximum of two
racks may be used at the same time.
LOW TEMPERATURE modes
This type of cooking can be used for proving, defrosting,
preparing yoghurt, heating dishes at the required speed and
slow cooking at low temperatures. The temperature options
are: 40, 65 and 90°C.
or
modes.
! When
mode is on, the rotisserie will stop if the door
is opened.
SUCCESS cooking modes
FAN GRILLING mode
The top heating element and the rotisserie spit (where
present) are activated and the fan begins to operate.
During part of the cycle the circular heating element is
also activated. This combination of features increases the
effectiveness of the unidirectional thermal radiation provided
by the heating elements through the forced circulation of
the air throughout the oven.
This helps prevent food from burning on the surface and
allows the heat to penetrate right into the food. Always cook
in this mode with the oven door closed.
GRILL mode
The top heating element and the rotisserie spit (where
present) are activated. The high and direct temperature
of the grill is recommended for food which requires a high
surface temperature. Always cook in this mode with the oven
door closed (see “Practical cooking advice”).
FAST COOKING mode
Preheating is not necessary for this cooking mode. This mode
is particularly suitable for cooking pre-packed food quickly
(frozen or pre-cooked). The best results are achieved using
one cooking rack only.
PIZZA mode
The top and circular heating elements switch on and the fan
begins to operate. This combination heats the oven rapidly.
If you use more than one rack at a time, switch the position
of the dishes halfway through the cooking process.
! The temperature and cooking duration are preset values, guaranteeing a perfect result every time automatically. These values cannot be adjusted and use
the C.O.P.® (Programmed Optimal Cooking) system. The
cooking cycle stops automatically and the oven indicates
when the dish is cooked. You may start cooking whether
the oven has been preheated or not. The cooking duration
can be customised according to personal tastes, modifying
it - before the start time - by ±5/20 minutes depending on
the selected programme. Once cooking has begun, it is still
possible to modify its duration. If the value is modified before
cooking begins, it is stored in the appliance memory and
suggested again when that cooking mode is next used. If
the temperature inside the oven is higher than the suggested
value for the selected mode, the text “Hot” appears on the
TEMPERATURE display and it will not be possible to begin
cooking; wait for the oven to cool.
! When the cooking stage has been reached, the oven
buzzer sounds.
! Do not open the oven door as this will disrupt the cooking
time and temperature.
BEEF mode
Use this function to cook beef and pork. Place the food
inside the oven while it is still cold. The dish may also be
placed in a preheated oven.
* Only available in certain models
11
AUS
AUS
DESSERTS mode
This function is ideal for cooking desserts which are made
using natural yeast, baking powder and desserts which
contain no yeast. Place the dish in the oven while it is still
cold. The dish may also be placed in a preheated oven.
and SMALL Space compartments separately or at the
same time.
The
icon will be enabled. The selected cavity alternates
every time the button is pressed. The MAIN cavity is
selected by default.
BREAD mode
Use this function to bake bread. To obtain the best results,
we recommend that you carefully observe the instructions
below:
Small Space
• Follow the recipe.
• Do not exceed the maximum weight of the dripping pan.
• Remember to pour 100 g (1dl) of cold water into the
dripping pan, which should be placed in position 7.
• The dough must be left to rise at room temperature for
1 – 1 ½ hours (depending on the room temperature) or
until the dough has doubled in size.
SMALL Space cavity. The
icon will light up.
2. Follow the above instructions for the EXTRALARGE
cavity when carrying out the various adjustment and setting
procedures.
Recipe for BREAD:
1 dripping pan holding 1000 g max, lower level
2 dripping pans each holding 1000 g max, middle and
lower levels
GRILL mode
The top heating element and the rotisserie spit (where
present) are activated. The high and direct temperature
of the grill is recommended for food which requires a high
surface temperature. Always cook in this mode with the oven
door closed (see “Practical cooking advice”).
Recipe for 1000 g of dough: 600 g flour, 360 g water, 11g
salt, 25 g fresh yeast (or 2 sachets of powder yeast)
Method:
• Mix the flour and salt in a large bowl.
• Dilute the yeast in lukewarm water (approximately 35
degrees).
• Make a small well in the mound of flour.
• Pour in the water and yeast mixture.
• Knead the dough by stretching and folding it over itself
with the palm of your hand for 10 minutes until it has a
uniform consistency and is not too sticky.
• Form the dough into a ball shape, place it in a large bowl
and cover it with transparent plastic wrap to prevent the
surface of the dough from drying out. Select the manual
LOW TEMPERATURE function on the oven and set the
temperature to 40°C. Place the bowl inside and leave
the dough to rise for approximately 1 hour (the dough
should double in volume).
• Cut the dough into equal sized loaves.
• Place them in the dripping pan, on a sheet of baking
paper.
• Dust the loaves with flour.
• Make incisions on the loaves.
• Place the food inside the oven while it is still cold.
• Start the
BREAD cooking mode.
• Once baked, leave the loaves on one of the grill racks
until they have cooled completely.
THE DIVIDER
Fit the DIVIDER to the DIVIDER shelf “D” using the pin,
with the arrows turned towards the rear part of the oven.
A buzzer will sound to confirm that the DIVIDER has been
fitted correctly; it will then be possible to use the two MAIN
* Only available in certain models
12
Starting the oven
1. With the DIVIDER inserted, use the
icon to select the
Cooking modes
FAST COOKING mode
Preheating is not necessary for this cooking mode. This
mode is particularly suitable for cooking pre-packed
food quickly (frozen or pre-cooked). The best results are
achieved using one cooking rack only.
Main Space
Starting the oven
1. With the DIVIDER inserted, use the
icon to select the
SMALL Space cavity. The
icon will light up.
2. Follow the above instructions for the EXTRALARGE
cavity when carrying out the various adjustment and setting
procedures.
CREATION cooking modes
! All cooking modes have a default cooking temperature
which may be adjusted manually to a value between 30°C
and 250°C as desired (300°C for GRILL mode). CREATION
cooking modes include all manual programmes.
The oven controls all essential aspects of each of these
cooking modes and makes it easier for you to create
the perfect dish, from the simplest recipe to the most
sophisticated culinary delights: the temperature, heat
source, humidity and fan assisted operation are all
controlled automatically.
This chapter was written with the help of our very own
culinary expert. We invite you to follow his advice so you can
benefit from his experience and perfect your cooking skills.
The recommended cooking modes, temperatures and
oven shelf heights reflect our expert’s own experience in
the kitchen and will help you achieve the very best results.
The table below specifies whether it is best to pre-heat your
oven or not for each CREATION cooking mode. Observing
these suggestions will guarantee perfect results.
If you wish to place food in a preheated oven, wait for the
preheating stage to be completed (this will be signalled by
a series of beeps).
The temperature is set automatically, according to the
cooking mode selected; however, you may adjust it to
suit your recipe.
You can also set a cooking duration with an immediate or
delayed start.
MULTILEVEL mode
All heating elements and the fan are activated. Since the
heat remains constant throughout the oven, the air cooks and
browns food in a uniform manner. A maximum of two racks
may be used at the same time.
LOW TEMPERATURE modes
This type of cooking can be used for proving, defrosting,
preparing yoghurt, heating dishes at the required speed and
slow cooking at low temperatures. The temperature options
are: 40, 65 and 90°C.
PIZZA mode
The top and circular heating elements switch on and the fan
begins to operate. This combination heats the oven rapidly.
If you use more than one rack at a time, switch the position
of the dishes halfway through the cooking process.
ECO mode
The rear heating element and the fan are switched on,
thus guaranteeing the distribution of heat in a delicate and
uniform manner throughout the entire oven. This energy
saving mode is suitable for cooking small dishes, reheating
meat and finishing off cooking processes.
SUCCESS cooking modes
! The temperature and cooking duration are preset values, guaranteeing a perfect result every time automatically. These values cannot be adjusted and use
the C.O.P.® (Programmed Optimal Cooking) system. The
cooking cycle stops automatically and the oven indicates
when the dish is cooked. You may start cooking whether
the oven has been preheated or not. The cooking duration
can be customised according to personal tastes, modifying
it - before the start time - by ±5/20 minutes depending on
the selected programme. Once cooking has begun, it is still
possible to modify its duration. If the value is modified before
cooking begins, it is stored in the appliance memory and
suggested again when that cooking mode is next used. If
the temperature inside the oven is higher than the suggested
value for the selected mode, the text “Hot” appears on the
TEMPERATURE display and it will not be possible to begin
cooking; wait for the oven to cool.
! When the cooking stage has been reached, the oven
buzzer sounds.
! Do not open the oven door as this will disrupt the cooking
time and temperature.
BEEF mode
Use this function to cook beef and pork. Place the food
inside the oven while it is still cold. The dish may also be
placed in a preheated oven.
DESSERTS mode
This function is ideal for cooking desserts which are made
using natural yeast, baking powder and desserts which
contain no yeast. Place the dish in the oven while it is still
cold. The dish may also be placed in a preheated oven.
Using the Small Space and Main Space at
the same time
! Simultaneous operation is only possible when using
CREATION cooking modes.
Starting the oven
For simultaneous use, simply start a cooking mode for both
cavities in succession.
The TEMPERATURE display shows the cooking parameters
for both cavities.
! Thanks to the high energy efficiency of the appliance, it
only takes around 15 minutes for the SMALL SPACE cavity
to preheat.
Programming cooking
! A cooking mode must be selected before programming
can take place.
Programming the cooking duration
1. Press the
icon until the
icon and the numerical
digits on the display begin to flash.
2. Turn the TIMER knob towards and to adjust the time
as desired; keep the knob in position to scroll through the
numbers more quickly and make the setting process easier.
3. Once you have reached the desired duration, press the
icon again.
4. Press the
icon to begin cooking.
5. When cooking has finished, “END” appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a duration of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
* Only available in certain models
13
AUS
AUS
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end
time can be scheduled.
! For the delayed programming to work properly, the clock
should be set to the correct time.
• Place the grill rack in position 3 or 4 and place
the food in the centre of the rack.
• We recommend that the temperature is set to its
maximum level. The top heating element is regulated by
a thermostat and may not always operate constantly.
1. Follow steps 1 to 3 to set the duration as detailed above.
FAST COOKING
• Use the dripping pan on shelf level 6.
• When cooking frozen foods, always follow the instructions
on the packaging.
2. Press the
icon twice: the
icon and the numerical
digits on the display will begin to flash.
3. Turn the TIMER knob towards
and
to adjust the
cooking end time value.
4. Once you have reached the desired end time, press the
icon again. The TIME display will show the duration
and the cooking end time alternately.
5. Press the
icon to activate the programmed mode.
Programming has been set when the
and
icons
light up alternately. In the time before cooking starts, the
TIME display shows the cooking end time and the cooking
duration alternately.
6. Once cooking has finished, “END” appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed, while the end time is set to
12:30. The programme will start automatically at 11:15
a.m.
To cancel programming press the
icon.
Practical cooking advice
MULTILEVEL
• Use positions 1, 3, 5 and 6.
• Place the dripping pan at the bottom and the rack at the
top.
• When cooking pizzas or focaccia breads, use a
lightweight aluminium tray with a maximum diameter
of 30 cm, placing it on top of the rack supplied. If the
pizza has a lot of toppings, we recommend adding the
mozzarella cheese to the top of the pizza halfway through
the cooking process. During the cooking process, it is
advisable to change the order of the shelves.
• Use positions 2 and 4, placing the food which requires
more heat on 2.
• Place the dripping pan on the bottom and the rack on
top.
GRILL
• Preheat the oven for 5 minutes.
• Fit the DIVIDER to the DIVIDER rack “D”.
• Keep the oven door closed when cooking in this mode.
• Place the rack in position 7. Position the food in the centre
of the rack. Position the dripping pan on shelf level 6.
• This function is recommended for: browning food, cooking
gratins, colouring meringues, making toasted sandwiches
and grilling small quantities of thin, lean meat.
• We recommend that the power level is set to maximum.
The top heating element is regulated by a thermostat
and may not always operate constantly.
14
Cooking advice table for ovens with an ExtraLarge Space cavity
Function
Food
Weight
(Kg)
Cook on
shelf no.
Shelf position
Dripping
pan
Creation
Multilevel*
Tarts
Cream puffs
Biscuits
Small pastries
Crème Caramel
(bain-marie)
Panettone
Cake
Sponge cake
1,5 -2
Roast
3 or 5
3
5
1
2
3
4
1
2
3
4
2 or 3
1 to 2
1
1
2 or 3
1 to 2
1
1
3 to 5
3
3
5
5
3 to 5
3
3
5
5
1
2
3
2 or 3
2
1
5
4
6
1
2
3
1
1
2
2 or 3
2
1
1 or 2
5
4
6
1
2
3
1
2 or 3
2
1
1***
2 or 3
1
1
1
1
1
1
5
Pizza*
Pizza/Focaccia
1
2
3
4
2 or 3
1 or 2
1
1
Low
temperature*
Rack 2
2 or 3
1 or 2
1
3
1
Kebabs
Fish fillets
Frozen potatoes
Grill*
Rack 1
1
2
3
4
Fast cooking*
Fan grilling*
Preheating
5
6
6
6
6
5
5
Roast meats
Gratin
Large roasting joint
Large game roasting joint
1
1
1
1
Beef ribs
Sausages
Pork ribs
Bacon
Proving/
Defrosting
White meringues
Meat/Fish
1
1
1
1
1
3***
3***
3***
3***
2
4
3
1
1
3 or 5
3
3
2***
3 or 4
1***
1***
5
5
6
3
Yes
Yes
Yes
Yes
190
180
180
180
25-30
35-45
40-50
45-55
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
190
190
190
190
25-35
25-35
30-40
30-40
180
180
180
180
15-25
15-25
20-30
20-30
Yes
Yes
Yes
200
200
200
30-40
35-45
40-50
Yes
Yes
Yes
Yes
Yes
Yes
170
170
170
160
160
160
35-45
35-45
40-50
45-60
60-75
60-75
Yes
Yes
Yes
Yes
190
190
190
160
30-35
35-40
40-45
90-240
No
No
No
210
200
230
20-25
15-20
25-30
Yes
Yes
Yes
Yes
220
220
220
220
15-25
20-30
25-35
30-40
No
No
No
No
2
2
4 or 5
5 or 7
5 or 7
5 or 7
Yes
Yes
Yes
Yes
No
3
3
Cooking
duration
(minutes)
Rack 3
4 or 5
5
4
2
Recommended
temperature
(°C)
5
5
6
No
No
200
190
200
200
100%
100%
100%
100%
35-75
40-60
90-120
90-120
20-30
10-20
15-25
3-6
40
65
90
8-12 hours
90-180
Success
Bread
Bread (see recipe)
Beef
Roast
Cakes
Cakes
2
2
2
1,2-1,5
1
2
3
1
7**
7**
7**
1***
2
1
1
5
1
2
4
3
2
2
5
No
No
No
No
No
No
5
* The cooking times listed above are intended as guidelines only and may be modified according to personal tastes.
Oven preheating times are set as standard and may not be modified manually.
** As stated in the recipe, pour 100 g water into the dripping pan in position 7.
*** Use the dripping pan to collect any oil or fat produced as a result of the cooking process.
! ECO cooking mode: This energy saving mode takes longer but saves energy, and is suitable for cooking dishes
such as fish fillets, small pastries and vegetables. It is also ideal for reheating meat and finishing off cooking
processes.
Cooking advice table for the Small Space feature
Function
Fast cooking*
Grill*
Food
Fish fillets
Meat fillets
Frozen pizza
Frozen prepared foods
Toast
Bacon
Pork steaks
Weight
(Kg)
Cook on
shelf
Shelf position
no.
Dripping
pan
1
1
1
1
6
6
6
6
1
1
1
6**
6**
Rack 1
6
7
7
Preheating
Recommended
temperature
(°C)
Cooking
duration
(minutes)
Divider
D
D
D
D
Yes
Yes
Yes
Yes
160-180
180-200
20-30
30-40
D
D
D
Yes
Yes
Yes
100%
100%
100%
3-5
3-6
15-25
* The cooking times listed above are intended as guidelines only and may be modified according to
personal tastes. Oven preheating times are set as standard and may not be modified manually.
** Use the dripping pan to collect any oil or fat produced as a result of the cooking process.
15
AUS
AUS
Cooking advice table for the Main Space feature
Function
Food
Weight
(Kg)
Cook on
shelf no.
Shelf position
Dripping
pan
Creation
1
2
2
1
1
2
1
2
2
1
2
1
1
2
2
1
Crème Caramel
(bain-marie)
1
Cake
Sponge cake
Pizza*
Pizza/Focaccia
Low
temperature*
Proving/
Defrosting
White meringues
Meat/Fish
Multilevel*
Tarts
Cream puffs
Biscuits
Small pastries
Preheating
Rack 1
Recommended
temperature
(°C)
Cooking
duration
(minutes)
Divider
D
D
Yes
Yes
200
200
30-40
35-45
Yes
Yes
Yes
Yes
190
190
25-35
25-35
3
D
D
D
D
3
D
D
Yes
Yes
180
180
200
200
15-25
15-25
30-40
35-45
2
D
Yes
170
35-45
1
2
D
Yes
160
60-75
1
2
2
1
3
D
D
Yes
Yes
190
190
30-35
35-40
1
2
2 or 3
1 or 2
3 or 5
D
D
Yes
Yes
220
220
15-25
20-30
D
No
40
D
D
No
No
65
90
3
3
1
2
2
2
1
1
3
3
8-12 hours
90-180
Success
Beef
Roast
Cakes
Cakes
1,2-1,5
1
1**
1
2
2
1
2
D
No
3
D
D
No
No
* The cooking times listed above are intended as guidelines only and may be modified according to personal
tastes. Oven preheating times are set as standard and may not be modified manually.
** Use the dripping pan to collect any oil or fat produced as a result of the cooking process.
! ECO cooking mode : This energy saving mode takes longer but saves energy, and is suitable for cooking
dishes such as fish fillets, small pastries and vegetables. It is also ideal for reheating meat and finishing off
cooking processes.
Cooking advice table for using the Small Space and Main Space at the same time
Main Space
Function
Food
Weight
(kg)
Pizza*
Rack position
Preheating
Recommended
temperature
(°C)
Cooking
duration
(minutes)
no.
Dripping
pan
1
2
2
1
3
D
D
Yes
Yes
200
200
30-40
35-45
Biscuits
1
2
2
1
3
D
D
Yes
Yes
Small pastries
1
2
2
1
3
D
D
Yes
Yes
180
180
200
200
15-25
15-25
30-40
35-45
Crème Caramel
(bain-marie)
1
2
D
Yes
170
35-45
Cake
1
2
D
Yes
160
60-75
Pizza (see recipe)
1
2
2 or 3
1 or 2
D
D
Yes
Yes
220
220
15-25
20-30
Creation
Multilevel*
Cook on
shelf
Tarts
Rack 1
Divider
3 or 5
Small Space
Function
Fast cooking*
Grill*
Food
Weight
(kg)
Cook on
shelf
Shelf position
no.
Dripping
pan
Fish fillets
Meat fillets
Frozen pizza
Frozen prepared foods
1
1
1
1
6
6
6
6
Pork steaks
1
6**
Rack 1
7
Preheating
Recommended
temperature
(°C)
Cooking
duration
(minutes)
Divider
D
D
D
D
Yes
Yes
Yes
Yes
160-180
180-200
D
Yes
100%
* The cooking times listed above are intended as guidelines only and may be modified according to
personal tastes. Oven preheating times are set as standard and may not be modified manually.
** Use the dripping pan to collect any oil or fat produced as a result of the cooking process.
16
20-30
30-40
15-25
Precautions and tips
! This appliance has been designed and manufactured
in compliance with international safety standards. The
following warnings are provided for safety reasons and
must be read carefully.
General safety
• The appliance was designed for domestic use inside the
home and is not intended for commercial or industrial use.
• The appliance must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain and storms.
• When moving or positioning the appliance, always use
the handles provided on the sides of the oven.
• Do not touch the appliance while barefoot or with wet or
damp hands and feet.
• The appliance must be used by adults only for
the preparation of food, in accordance with the
instructions provided in this booklet. Any other
use of the appliance (e.g. for heating the room)
constitutes improper use and is dangerous. The
manufacturer may not be held responsible for any
damage caused as a result of improper, incorrect
and unreasonable use of the appliance.
• Do not touch the heating elements or certain parts
of the oven door when the appliance is in use; these
parts become extremely hot. Keep children well away
from the appliance.
• Make sure that the power supply cables of other electrical
appliances do not come into contact with the hot parts of
the oven.
• The ventilation and heat dispersal openings must never
be obstructed.
• Always grip the oven door handle in the centre: the ends
may be hot.
• Always use oven gloves when placing cookware in the
oven or when removing it.
• Do not use aluminium foil to line the bottom of the oven.
• Do not place flammable materials in the oven: if the
appliance is switched on accidentally, the materials could
catch fire.
• Always make sure the knobs are in the “●”/“○” position
when the appliance is not in use.
• When unplugging the appliance, always pull the plug
from the mains socket; do not pull on the cable.
• Do not perform any cleaning or maintenance work without
having disconnected the appliance from the electricity
mains.
• If the event of malfunctions, under no circumstances
should you attempt to perform the repairs yourself.
Contact an authorised Service Centre (see Assistance).
• Do not rest objects on the open oven door.
• Do not let children play with the appliance.
• The appliance should not be operated by people (including
children) with reduced physical, sensory or mental
capacities, by inexperienced individuals or by anyone
who is not familiar with the product. These individuals
should, at the very least, be supervised by someone who
assumes responsibility for their safety or receive preliminary
instructions relating to the operation of the appliance.
• The appliance is not intended to be operated by
means of an external timer or separate remotecontrol system.
Disposal
• When disposing of packaging material: observe local
legislation so that the packaging may be reused.
• The European Directive 2012/19/EEC on Waste
Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not
be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected
separately in order to optimise the recovery and
recycling of the materials they contain and reduce
the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose
of the appliance it must be separately collected.
Consumers should contact their local authority or retailer
for information concerning the correct disposal of their
old appliance.
Respecting and conserving the environment
• You can help to reduce the peak load of the electricity
supply network companies by using the oven in the
hours between late afternoon and the early hours of
the morning. The cooking mode programming options,
the “delayed cooking” mode (see Cooking modes) and
“delayed automatic cleaning” mode (see Care and
Maintenance) in particular, enable the user to organise
their time efficiently.
• Always keep the oven door closed when using the GRILL
and FAN GRILLING modes: this will achieve improved
results while saving energy (approximately 10%).
• Check the door seals regularly and wipe them clean
to ensure they are free of debris so that they adhere
properly to the door, thus avoiding the dispersal of heat.
! This product complies with the requirements of the latest
European Directive on the limitation of power consumption
of the standby mode.
Maintenance and care
Switching the appliance off
Disconnect your appliance from the electricity supply before
carrying out any work on it.
Cleaning the appliance
• Slight differences in colour on the front of the oven are due
to the different materials used, i.e. glass, plastic or metal.
• Any shady areas resembling grooves on the oven door
glass are caused by reflections from the oven light.
• The enamel is branded at very high temperatures. This
process may cause colour variations. This is normal and
will not affect appliance operation in any way. The thin
edges of the sheet metal cannot be entirely enamelled
and may therefore appear to be unfinished. This will not
affect the rust protection.
17
AUS
AUS
• The stainless steel or enamel-coated external parts and
the rubber seals may be cleaned using a sponge that
has been soaked in lukewarm water and neutral soap.
Use specialised products for the removal of stubborn
stains. After cleaning, rinse and dry thoroughly. Do not
use abrasive powders or corrosive substances.
• The inside of the oven should ideally be cleaned after
each use, while it is still lukewarm. Use hot water and
detergent, then rinse well and dry with a soft cloth. Do
not use abrasive products.
• All accessories - with the exception of the sliding racks
- can be washed like everyday crockery, and are even
dishwasher safe.
• We recommend that detergents are not sprayed directly
onto the control panel, but that a sponge is used instead.
! Never use steam cleaners or pressure cleaners on the
appliance.
Replacing the light bulb
Lamp
Holder
compartment
Lamp
Glass cover
! Do not touch the light bulb directly with your hands.
! Do not use the oven lamp as/for ambient lighting.
Sliding rack kit assembly
Cleaning the oven door
!The door of LED INSIDE models cannot be removed.
Clean the glass part of the oven door using a sponge and
a non-abrasive cleaning product, then dry thoroughly with a
soft cloth. Do not use rough abrasive material or sharp metal
scrapers as these could scratch the surface and cause the
glass to crack. For more thorough cleaning purposes, the
oven door may be removed:
1. Open the oven door fully (see diagram).
2. Use a screwdriver to lift up and turn the small levers F
located on the two hinges (see diagram).
A
Left
guide rail
Right guide
rail
B
F
To replace the oven light
bulb:
1. Remove the glass cover
of the lamp-holder.
2. Remove the light bulb and
replace it with a similar one:
halogen lamp voltage 230 V,
wattage 25 W, cap G 9.
3. Replace the glass cover
(see diagram).
C o Dire
f e ct
xt ion
ra
ct
io
n
To assemble the sliding
racks:
1. Remove the two frames,
lifting them away from the
spacers A (see figure).
2. Choose which shelf to use
with the sliding rack. Paying
attention to the direction in
which the sliding rack is to
be extracted, position joint B
and then joint C on the
frame.
3. Grip the door on the two outer
sides and close it approximately
half way. Pull the door towards you,
lifting it out of its slot (see diagram).
To replace the door, reverse this
sequence.
Inspecting the seals
Check the door seals around the oven regularly. If the seals
are damaged, please contact your nearest Service Centre
(see Assistance). We recommend that the oven is not used
until the seals have been replaced.
18
D
3. Secure the two frames
with the guide rails using the
holes provided on the oven
walls (see diagram). The
holes for the left frame are
situated at the top, while the
holes for the right frame are
at the bottom.
4. Finally, fit the frames on
the spacers A.
! Do not place the sliding racks in position 5.
Automatic cleaning with the FAST CLEAN
function
With the FAST CLEAN mode, the internal temperature of the
oven reaches 500°C. The pyrolytic cycle is activated, burning
away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic
cleaning cycle as surfaces may become very hot. Particles
may ignite inside the oven as a result of the combustion
process. There is no cause for concern: this process is both
normal and hazard-free.
Before initiating the FAST CLEAN mode:
• clean the oven door;
• remove large or coarse food residues from the inside of
the oven using a damp sponge. Do not use detergents;
• remove all accessories and the sliding rack kit (where
present);
• do not place tea towels or pot holders over the oven
handle.
! If the oven is too hot, the pyrolytic cycle may not start.
Wait for the oven to cool down.
! The programme may only be started once the oven door
has been closed.
The desired Fast Clean mode will be confirmed and started
automatically if the CLOCK icon button is not pressed within
10 seconds from selecting the cooking time
To activate the Fast Clean programme:
1. Switch the control panel on by pressing the
icon.
2. Press the
icon; the display will show the text “Piro”,
“nor” and the default duration of 1:30 h (normal cycle)
alternately.
3. Press the
icon, then turn the TIMER knob to adjust
the default cleaning level. There are 3 different levels to
choose from, each with a pre-set duration which cannot
be modified:
1. Economy (ECO): turn the knob towards “-”. Duration 1
hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards “+”. Duration 2
hours.
4. Press the
icon to confirm.
5. Press the
icon to begin the cleaning cycle.
• pressing the
icon cancels the cleaning cycle at any
time;
• if a malfunction occurs, the heating elements will be
switched off;
• once the oven door has been locked, you cannot change
the duration and end time settings.
Programming the automatic cleaning end time
1. Press the
icon twice: the
icon and the numerical
digits on the display will begin to flash.
2. Turn the TIMER knob towards
and
to adjust the
cleaning end time value.
3. Once you have reached the desired end time, press
the
icon again. The display will show the duration, the
cleaning end time and the set cleaning level alternately.
4. Press the
icon to activate the programmed mode.
Programming has been set when the
and
buttons
are illuminated.
5. Once cleaning has finished, “END” appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO)
FAST CLEAN level has been selected, with the default
duration of 1 hour. 12:30 is scheduled as the end time.
The programme will start automatically at 11:30 a.m.
To cancel programming press the
icon.
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait
for the
icon to switch off: this indicates the oven
temperature has dropped to an acceptable level. You will
notice some white dust deposits on the bottom and the sides
of your oven; remove these deposits with a damp sponge
once the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in which
case it is not necessary to remove the deposits, they are
completely harmless and will not affect your food in any way.
An end time for the FAST CLEAN cycle (as for a normal
cooking cycle) may be programmed (see Programming the
automatic cleaning end time).
Safety devices
• the door locks automatically as soon as the temperature
reaches a high value; the
display;
icon lights up on the
19
AUS
195102565.03
06/2013 - XEROX FABRIANO
NOTICE
AUS
GB
Do not place
or rest anything
on the open door
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
Troubleshooting
Problem
Possible cause
The “Clock button” and the
digits on the display flash.
The appliance has just been
Set the clock.
connected to the electricity mains
or there has been a blackout.
There has been a blackout.
Reprogram the cooking mode.
A programmed cooking mode
does not start.
Only the high luminosity
“Clock button” is lit.
An automatic mode has been
selected. “Hot” appears on the
display and cooking does not
start.
Fan-assisted cooking has been
selected and the food looks burnt.
20
Solution
The appliance is in standby mode Press any button to exit
standby mode.
The temperature inside the oven Wait for the oven to cool down.
is higher than the suggested
value for the selected mode.
Positions 1 and 5: the direct
heat could cause
temperature-sensitive
foods to burn.
We recommend switching
dripping pan positions halfway
through cooking.
Download PDF

advertising