ASA Electronics DV352 Portable DVD Player User Manual

DV352
Owner’s Manual
DVD / CD / MP3 PLAYER
IR
MODE
VOL
SEL
VIDEO IN 2
L
AUDIO IN 2
R
MUTE
www.ASAElectronics.com
Thank You!
Thank you for choosing a JENSEN product. We’ve tried to make the instructions in this owner’s
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use
all of the features of your new JENSEN DV352 Mobile Multimedia DVD/CD/MP3 Player for
maximum enjoyment.
Introduction ..................................................................................................................................... 2
Preparation...................................................................................................................................... 2
Installation ...................................................................................................................................... 3
Wiring .............................................................................................................................................. 5
Controls and Indicators ................................................................................................................... 6
Basic Operation.............................................................................................................................. 8
Disc Operation ................................................................................................................................ 8
Setup Menu....................................................................................................................................11
Disc Symbols and Properties ........................................................................................................ 13
Troubleshooting ............................................................................................................................ 14
Specifications ................................................................................................................................ 15
Warranty........................................................................................................................................ 15
DV352
Introduction
CAUTION: This mobile DVD player is a Class I laser product that uses a visible/invisible
laser beam which could cause hazardous radiation exposure if improperly directed. Be
sure to operate the mobile DVD player as instructed. Use of controls or adjustments or
performance of procedures other than those specified herein may result in hazardous
radiation exposure. Do not open covers and do not attempt to repair the unit yourself. Refer
servicing to qualified personnel.
Congratulations on your purchase of the JENSEN DV352 Mobile Multimedia DVD/CD/MP3 Player.
Features
•
High temperature deck and OPU
•
Slot type drive
•
Front and rear AV jacks for system expansion
•
Din size with mounting brackets included
•
LCD display with blue back lighting
It’s a good idea to read all of the instructions before beginning the installation. We recommend
having your JENSEN DV352 installed by a reputable installation shop.
•
Blue back lit buttons
Tools and Supplies
•
Dolby digital sound
•
IR remote control included
•
12 volt operation
•
Compatible with PAL and NTSC DVD (Video CD)
•
Single LSI chip integrates all major DVD playback circuit functions including MPEG2 decoder,
video D/A converter and audio decoders
•
•
Preparation
You will need these tools and supplies to install your DV352:
•
Torx type, flat-head and Philips screwdrivers
•
Wire cutters and strippers
•
Tools to remove existing radio (screwdriver, socket wrench set or other tools)
•
Electrical tape
L/R stereo analog audio outputs for connection to existing head unit aux inputs
•
Crimping tool
Composite video output
•
Volt meter/test light
•
Crimp connections
•
18 gauge wire for power connections
•
16 – 18 gauge speaker wire
Precautions
•
Use the Proper Power Supply.
This product is designed to operate with a 12 volt DC, negative ground battery system (the
regular system in a North American car).
•
Protect the Disc Mechanism.
Avoid inserting any foreign objects into the slot of this player. Failure to observe this may
cause malfunction due to the precise mechanism of this unit.
To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable
prior to installation.
•
Use Authorized Service Centers.
Do not attempt to disassemble or adjust this precision product; contact a professional for
assistance.
•
Avoid Moisture.
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
NOTE: If the DV352 is to be installed in a car equipped with an on-board drive or navigation
computer, do not disconnect the battery cable. If the cable is disconnected, the computer
memory may be lost. Under these conditions, use extra caution during installation to avoid
causing a short circuit.
•
Use Recommended Accessories:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
Disconnecting the Battery
2
DV352
Installation
CAUTION! Be careful not to damage the car wiring.
DIN Front-Mount Installation
4.
Place the unit in front of the dashboard opening so the wiring can be brought through the
mounting sleeve.
5.
Complete wiring connections (see “Wiring” on page 5).
6.
After completing the wiring connections, turn the unit on to confirm operation (ignition switch
must be on). If unit does not operate, recheck all wiring until problem is corrected. Once the
unit is properly operating, turn off the ignition switch and proceed with final mounting of the
chassis.
7.
Carefully slide the DVD player into the half-sleeve making sure it is right-side-up until it is fully
seated and the spring clips lock it into place.
1.
Remove the transport screws.
2.
Use the supplied release keys to remove the half-sleeve from the unit.
2
NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 30°
of horizontal. Make sure the unit is mounted within this limitation.
8.
MO
DE
VOL
DVD
SEL
/ CD
/ MP
3
PLA
YER
Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the
chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure
part of the dashboard either above or below the unit using the screw and hex nut provided.
Bend the strap to position it as necessary.
IR
MUTE
VIDEO
IN 2
L AUD
IO IN
2
1
R
CAUTION! The rear of the unit must be supported with the strap to prevent damage to the
dashboard from the weight of the unit or improper operation due to vibration.
9.
3.
Install the half-sleeve.
Replace any items you removed from the dashboard.
DIN Front-Mount Installation
a.
Install adapter if necessary (optional).
b.
Install half-sleeve into adapter or dashboard using the supplied screws. Do not force the
sleeve into the opening or cause it to bend or bow.
c.
Locate the series of bend tabs along the top, bottom and sides of the mounting sleeve.
With the sleeve fully inserted into the dashboard opening, bend as many of the tabs
outward as necessary to firmly secure the sleeve to the dashboard.
8
9
Install Half-Sleeve
3c
MO
DE
VOL
SEL
DVD
/ CD
5
/ MP
3 PLA
YER
IR
MUT
E
VIDE
O IN
3a
2
L AUD
IO IN
2
R
4
3b
3
DV352
DIN Rear-Mount Installation
Removing the Unit
With some vehicles, you can use the screw holes located on both sides of the unit to fasten the
unit to the factory radio mounting brackets supplied with your vehicle. To install this unit using
factory mounting plates, perform the following steps:
1.
Make sure the ignition is turned off, then disconnect the cable from the vehicle battery’s
negative (-) terminal.
2.
Remove the metal strap attached the back of the unit (if attached).
1.
3.
Lift the top of the outer trim ring then pull it out to remove it.
4.
Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then
pull the unit out of the dashboard.
Remove trim ring.
NOTE: The outer trim ring, sleeve and the metal strap are not used for DIN rear-mount
installation.
2.
3.
Align the screw holes on the bracket with the screw holes on the unit, then tighten the screws
(5x5mm) on each side.
Removing the Unit
Reinstall the dash panel.
DIN Rear-Mount Installation
MO
DE
VOL
SEL
DVD
/ CD
/ MP
3
PLAY
ER
IR
MUTE
VIDEO
MO
DE
VOL
SEL
DVD
/ CD
/ MP
3 PLA
YER
IR
MUT
E
VIDE
O IN
2
L AUD
IO IN
2
2
R
1
3
Reconnecting the Battery
When wiring is complete, reconnect the battery negative terminal.
4
IN 2
L AU
DIO
IN 2
R
DV352
Wiring
Power Connections
Audio/Video Connections
3.
VIDEO 1
DC12VIN
DC12VOUT
INPUT
AUDIO OUT
AUDIO INPUT 1
L
R
L
R
VIDEO
VIDEO
OUT1
OUT2
YELLOW
CONSTANT POWER WIRE (yellow) – Connect the 12V PLUS constant power wire to a live
12 volt wire in the vehicle. Before making a connection, check that the wire you intend to
connect it to is always live, even when the car’s ignition is turned off. If a live wire is not found,
route the wire to the car’s fuse block and connect it to a live circuit there.
YELLOW
2.
RED
GROUND WIRE (black) – Securely fasten the Ground wire to a grounded metal part of the
car’s chassis. If you cannot find an existing bolt or screw to fasten it to, drill a hole in the metal
and secure it with a screw. To ensure a good ground, remove any paint or grease from areas
where the wire will contact the surface.
WHITE
1.
+
REMOTE
ACC POWER WIRE (red) – Connect to a +12 volt circuit that is only live when the ignition is
on. The best connection point is at the car’s fuse block at the “RADIO” or “ACCESSORY”
identified terminals.
DC12VOUT
INPUT
AUDIO OUT
AUDIO INPUT 1
L
R
L
R
VIDEO
VIDEO
OUT1
OUT2
REMOTE CONTROL RECEIVER
VIDEO 1
DC12VIN
+
REMOTE
Black
1 Ground
Connect to ground terminal.
Yellow
3A
+
2 Memory/Battery
0.5A
3 Accessory/Ignition
RED
Red
WHITE
YELLOW
Connect to battery or 12 volt
power source that is always
live. The radio will not work
if this wire is not connected.
NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging
the DVD player. The DV352 uses one 3 amp and one 0.5 amp ACG fuse, located in the black
filter boxes in-line with the power wires.
Connect to existing radio
wire or radio fuse.
5
DV352
Controls and Indicators
Remote Control Operation
The buttons located on the unit and the remote controls that perform the same function are
assigned the same number for reference on the diagrams and in the text.
18
17
Front Panel Operation
6
EJECT
POWER
11
16
1
12
2
3
1
3
DISPLAY
PROGRAM
MUTE
MODE
REPEAT
A-B
SUBTITLE
ANGLE
MENU
SETUP
11
21
DVD / CD / MP3 PLAYER
SHUFFLE
19
IR
MODE
23
20
VOL
VIDEO IN 2
SEL
L
AUDIO IN 2
24
MUTE
28
P/N
8
7
6
5
4
13
14
AUDIO
30
TITLE
2
Infrared Sensor
3.
Eject
4.
Fast Forward/Advance Chapter
5.
Stop
6.
Pause/Play/Mute
7.
Rewind/Previous Chapter
8.
Volume Up
9.
Volume Down
8
3
VOLUME
36
4
5
6
7
8
9
PBC
GOTO
0
9
4
7
TRACK
37
10
33
32
15
Power
2.
SEL
EQ
1
1.
29
OK
31
9
25
26
RESUME
27
10
ZOOM
5
R
22
35
SLOW
34
39
38
Using the Remote Control
Point the remote control towards the player front face remote sensor IR (2). The operation angle is
approximately 30 degrees in each direction of the front of the remote sensor.
10. Select
11. Mode
12. Disc Slot
13. Video In
14. Left Audio In
15. Right Audio In
16. Reset
6
DV352
Remote Control Functions
Changing the Battery
Ref # Button
Function
The remote control uses a CR2025 3V button cell lithium battery. The battery compartment is
located on the back of the remote control near the bottom edge. To replace the battery:
1
Turn the unit ON or OFF
/POWER
3
/EJECT
Eject the disc
4
/TRACK
Skip to the next track/chapter
5
Stop disc playback
6
/MUTE
Play/pause the disc (for disc play mode) and to mute the sound (for AV IN mode)
7
/TRACK
Go to previous track/chapter
8
/VOLUME
9
/VOLUME
10
SEL
Increase the volume level
Decrease the volume level
Select the desired adjustment mode. Press VOL+/- to change settings
11
MODE
Change between disc (DVD/VCD/CD/MP3) play mode and AV IN mode
17
DISPLAY
Display statistical disc information during playback
18
PROGRAM
Play tracks in programed order (MP3/CD)
19
SHUFFLE
Play tracks in random order (NOT for DVD)
20
REPEAT
Repeat current track/chapter
21
A-B
Repeat selected passage continuously
22
SUBTITLE
Change the SUBTITLE language on multi-subtitle language DVD discs
23
ANGLE
Change the viewing angle on multi-angle DVD discs
24
MENU
Display the root menu stored on DVD discs
25
SETUP
Display the SETUP menu
26
ZOOM
Increase the picture size
27
RESUME
Resume play from stopping point
28
P/N
Switch between PAL mode, NTSC mode and AUTO mode
29
,
30
OK
Confirm selection of track/chapter
31
AUDIO
Change the AUDIO sound track on multi-audio sound track DVD discs. Change the sound mode of
VCD discs
32
TITLE
Display the TITLE menu stored on DVD disc
33
EQ
Select the equalization mode, such as FLAT, CLAS, POP, ROCK
34
35
,
,
Select items left/right and ahead/back in menu mode
/TRACK
Search in reverse rapidly
/TRACK
Search forward rapidly
36
0-9
37
GOTO
Enter track/chapter number directly. Use GOTO to search.
Used with numeric buttons to search disc
38
PBC
Switch between PBC ON and PBC OFF on VCD discs
39
SLOW
Change to slow playback motion (VCD/DVD)
7
1.
Open the battery compartment cover.
2.
Insert the new battery. Make sure that the positive and negative terminals of the battery are
oriented as indicated.
3.
Close the cover.
DV352
Basic Operation
Turning the Unit On/Off
Reset
Press the POWER
The RESET button (16) is located on the front of the unit. You should engage the RESET button
only in the following situations:
button (1) on the front panel or remote control to turn the unit on/off.
Inserting a Disc
•
After initial installation when all wiring is complete
•
If all function buttons become inoperable
Ejecting a Disc
•
If an error symbol appears on the display
Press the EJECT button (3) to eject the disc from the slot. The unit does not have to be on to eject
a disc.
To reset the unit, use a ballpoint pen or a thin metal object to depress the RESET button.
Insert a disc, label side up, into the disc slot (12). The player will start playback automatically.
AV In Operation
NOTE: Do not drive with an ejected disc in the slot.
You can connect another audio/video system to the unit through the AV IN terminals on the back
(AV1 INPUT) or front panel (AV2 INPUT) of the unit. Once the device is connected, press the
MODE button (11) on the front panel or remote control to select “AV IN1” or “AV IN2” mode.
Audio Control
Volume
Press the VOL
volume.
button (8) to increase the volume, or the VOL
Disc Operation
button (9) to decrease the
Stopping Play
Mute
Press the MUTE button (6) to silence the audio. Press MUTE again to resume audio.
Press the SEL button (10) on the front panel or remote control to select the desired audio
adjustment mode. The adjustment mode will change in the following order:
Bass
Press SEL until “BAS” appears in the display. Press the volume buttons to adjust the Bass from +06 to -06.
Treble
Press SEL until “TRE” appears in the display. Press the volume buttons to adjust the Treble from +06 to -06.
•
Press the stop button (5) on the front panel or remote control to stop disc play. Press the
button (6) to resume normal playback.
•
Press the stop button (5) on the front panel or remote control twice to stop the playback and
return to the initial chapter.
Moving Through Chapters/Tracks
Press the
button (4) on the unit or remote control to advance to the next chapter/track.
Setting the Clock
Press the
button (7) on the unit or remote control to move to the previous chapter/track.
Press and hold the DISPLAY button (17) on the remote until the clock display flashes, then
Fast Forward/Fast Reverse
release. Next, press
(29) or
(7) to adjust the hour and
Continue changing the hour to move between AM and PM.
Press the
button (35) or button (29) on the remote control to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”, “6X”, and “8X”. Press the button (6)
to return to regular play. Press and hold to fast-forward to a specific location, then release to begin
playback from that point.
Balance Press SEL until “BAL” appears in the display. Press the volume buttons to adjust the Balance from 12L to 12R.
(29) or
(4) to adjust the minutes.
Mode
Press the MODE button (11) on the front panel or remote control to switch between disc (DVD/
CVCD/CD/MP3) mode, AV IN1, and AV IN2 mode.
Press the
button (34) or button (29) on the remote control to fast reverse. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”, “6X”, and “8X”. Press the button (6) to
return to regular play. Press and hold to fast-reverse to a specific location, then release to begin
playback from that point.
Equalization
Press the EQ button (33) on the remote control to activate the equalization function. Continue
pressing the EQ button to choose between the three equalizer modes (Clas, Pop and Rock) or to
turn the equalizer function off.
Slow Motion Play
Press the SLOW button (39) on the remote control during play to activate slow motion playback.
Each time the button is pressed, the speed changes as follows.
8
DV352
•
DVD: PLAY > SF 2X > SF 4X > SF 8X > SR 2X > SR 4X > SR 8X > PLAY
•
•
VCD: PLAY > SF 1X > SF 2X > SF 3X > STEP BWD
Goto Search
Pausing Playback
Press the A-B button again to cancel the A-B section setting and stop repeat play.
During DVD or VCD playback, perform the following steps to use the GOTO feature to access a
specific location on a disc:
Press the
button (6) on the unit or the
button on the remote control during playback to
temporarily stop playback. To return to normal playback, press the
button again.
Title/Chapter Search
Repeating Playback
1.
Press the GOTO button (37) once to search for a specific title/chapter. The following
message appears on the display: TITLE 01/01 CHAPTER 01/10.
2.
Use the numeric buttons (36) on the remote control to enter the desired title/chapter number,
then press the OK button (30).
Press the REPEAT button (20) on the remote control to select the repeat mode as follows:
DVD: CHAPTER REPEAT ON > TITLE REPEAT ON > REPEAT OFF
VCD/CD: REP-ONE > REP-ALL > REPEAT OFF
Time Search
•
Select REP-ONE to continuously repeat the current chapter/track.
1.
•
Select REP-ALL to continuously repeat all chapters/tracks on the current disc. After playing
the last chapter/track, the unit will stop and display the elapsed time.
Press the GOTO button (37) twice to search for a specific time. The following message
appears on the display: TITLE 01/01 TIME -- : --: --.
2.
Use the numeric buttons (36) on the remote control to enter the desired title/chapter number,
then press the OK button (30).
NOTE: The REPEAT feature does not support VCD 2.0 (with PBC ON).
PBC On (CD/VCD)
PBC (Play Back Control) (VCD Only)
1.
For VCDs with play back functionality, play back control (PBC) provides additional controls for
VCD playback.
Press the GOTO button (37) once to enter the exact time. The following message appears on
the display: GO TO -- : --.
2.
Press the PBC button (38) on remote control to toggle the PBC function “On”/”Off”. Once PBC is
on, playback starts from track one of the play list.
Use the numeric buttons (36) on the remote control to enter the time, then press the OK
button (30).
Playing in Programmed Order (CD/MP3/VCD with PBC OFF)
Zooming
1.
The Zoom function allows you to increase the picture size. Press the ZOOM button (26) on the
remote control to toggle from 1.5 scale to 2.0 scale to 3.0 scale. When the scale is 3.0X, press
ZOOM again to cancel the Zoom function.
With play stopped, press the PROGRAM button (18) and the screen will display “PROGRAM
P00:00”.
2.
Press the numeric button(s) (36) on the remote control to play the corresponding track in the
selection order. For example: press 4 to play track 4 first. “PROGRAM P01:04” appears on
the display. Press 6 and “PROGRAM P02:06” appears.
During Zoom mode, press the arrow (
picture up, down, left, or right.
3.
If you want to complete program setting, press the
button (6) on the unit or the
on the remote control to play the tracks in programmed order.
Random Play (CD/MP3/VCD Only)
4.
Press the SHUFFLE button (19) on the remote control to select and play tracks in random order.
The display will show “SHUFFLE ON”. Press the
button to begin the shuffled playback. Press
the SHUFFLE button again to turn SHUFFLE off.
To stop programming tracks, press the
start the AUTO PLAY function.
On-Screen Display Function
,
,
,
buttons) (29) or
/
buttons (34, 35) to move the
button
button (5), then press the PROGRAM button to
Sectional Repeat Function (A-B)
Press the DISPLAY button (17) during playback to display the contents of the current disc on the
screen.
Use the A-B function to define a specific area of a disc to repeat.
DVD
•
1.
•
Press the A-B button (21) on the remote control to set the start point (ARPT) of the repeated
section.
Press the A-B button again once you reach the desired end point (BRPT) of the repeated
section. The selected portion of the DVD will now repeat continuously.
Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
9
DV352
4.
Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc
currently being played will be shown on the screen, along with the elapsed time.
2.
Press DISPLAY for the second time:
TRACK: 01/14
TITLE REMAIN
01:46:58
3.
5.
Press DISPLAY for the third time:
TRACK: 01/14
Press DISPLAY for the fourth time:
MP3
CHAPTER REMAIN
00:01:39
5.
1.
2.
3.
Press DISPLAY for the fifth time to clear the message on the screen.
2.
Press DISPLAY for the first time:
SINGLE ELAPSED
00:00:25
3.
Press DISPLAY for the second time:
Multi-Language Discs (DVD Only)
SINGLE REMAIN
00:03:15
Changing Audio Language
If you are watching a disc recorded in multiple languages, press the AUDIO button (31) on the
Press DISPLAY for the third time to display “OFF” then clear the message on the screen:
remote control to choose a language. If no other languages are recorded,
left corner of the screen.
is displayed in the top
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE
button (22) on the remote control to choose the language in which you would like the subtitles to
Press DISPLAY for the first time:
appear. If no other languages are available,
SINGLE ELAPSED
00:00:25
is displayed in the top left corner of the screen.
NOTE: During VCD playback you can press the AUDIO button (31) on the remote control
during playback to switch the sound between mono and stereo sound in the following
order: MONO LEFT > MONO RIGHT > STEREO.
TRACK: 01/14
Press DISPLAY for the second time:
Menu Function
SINGLE REMAIN
00:03:15
Press the MENU button (24) on the remote control while the disc is playing to display the disc root
menu. You can navigate with the remote control navigation keys and select a feature with the OK
button (30) on the remote control.
TRACK: 01/14
3.
Press DISPLAY for the third time to display “OFF” then clear the message on the screen.
OFF
CD
2.
Press DISPLAY for the second time:
CHAPTER REMAIN 00:04:25
OFF
00:00:25
1.
Press DISPLAY for the first time:
CHAPTER ELAPSED 00:00:25
VCD
1.
Press DISPLAY for the fifth time to display “OFF” then clear the message on the screen.
OFF
00:40:35
CHAPTER ELAPSED
00:00:24
4.
Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35
Press DISPLAY for the third time:
Title Menu Function
TOTAL ELAPSED
00:00:25
If the DVD has multiple titles recorded on the disc, you can select a specific title from the title menu
from which to start playback.
TRACK: 01/14
10
DV352
1.
Press the TITLE button (32) on the remote control during playback to display the title menu.
2.
Select the preferred title using the remote control arrow keys (29) and confirm by pressing the
OK (30) button.
General Setup
- - GENERAL PAGE - -
Viewing an Alternate Picture Angle (DVD Only)
Some DVDs contain scenes that have been shot simultaneously from different angles. For discs
recorded with multiple angles, press the ANGLE button (23) on the remote control to toggle
available angles of the on-screen image. If no other angles are recorded,
left corner of the screen.
is displayed in the top
TT
Setup Menu
SETUP MENU - - MAIN PAGE
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
NORMAL/PS
NORMAL/LB
WIDE
MAIN PAGE
GENERAL SETUP
AUDIO SETUP
PREFERENCES
GENERAL SETUP
Aspect Ratio
Select the “TV DISPLAY” menu option to select the “NORMAL/PS”, “NORMAL/LB” or “WIDE”
aspect ratio.
EXIT SETUP
GOTO GENERAL SETUP PAGE
To access the Setup menu, perform the following steps:
1.
Press the SETUP button (25) on the remote control to display the “SETUP MENU - - MAIN
PAGE” screen.
2.
Select the preferred item using the / buttons (29).
3.
Press the OK button (30) on the remote control to display the selected submenu.
From any submenu, select “MAIN PAGE” to return to the “SETUP MENU - - MAIN PAGE” screen.
Select “EXIT SETUP” to close the SETUP MENU.
11
•
Normal/PS (For 4:3 TV): Image is played back in the PAN SCAN style. (If connected to a
wide-screen TV, the left and right edges are cut off.)
•
Normal/LB (For 4:3 TV): Image is played back in letter box style. (If connected to a widescreen TV, black bands appear at the top and bottom of the screen.)
DV352
•
Preferences
Wide (For 16:9 TV): Select this option when a wide-screen TV set is connected.
PIC Mode Setup
•
Select “AUTO” to allow the player to select the best setting for each disc.
•
Select “HI-RES” for the best possible image resolution.
•
Select “N-FLICKER” when the image has noise or distortion.
- - PREFERENCES PAGE - -
ANGLE MARK Display Setup
When set to ON while a multi-angle DVD disc is playing, the angle mark (
screen. When set to “OFF”, the mark does not appear.
) appears on the
TT
CAPTIONS Setup
Set the CAPTIONS feature to “ON” to show captions (such as the actor’s dialogue) when a DVD
disc is playing. Set the feature to “OFF” if you do not want captions to appear.
SCR SAVER Setup
Turn the SCR SAVER function “ON” or “OFF”.
OSD LANG Type Setup
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
AUTO
NTSC
PAL
SET PREFERENCES
Select the preferred OSD (On Screen Display) language using the / buttons (29).
Audio Setup
SMART NAV
LOGO
- - AUDIO SETUP - LPCM OUTPUT
LPCM 48K
LPCM 96K
MAIN PAGE
MAIN PAGE
BACK TO MAIN PAGE
TV TYPE Setup
This player can play discs recorded in either PAL or NTSC format.
•
Select “NTSC” when the unit is connected to an NTSC TV.
•
Select “PAL” when the unit is connected to a PAL TV.
•
Select “AUTO” to allow the player to adjust the format according to the DVD disc format.
AUDIO Language Setup
AUDIO RELATED
Select one of the following preferred AUDIO soundtrack options using the the / buttons (29):
ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE, GERMAN, ITALIAN, PORTUGUESE.
LPCM OUTPUT
Set the LPCM (Line Pulse Code Modulation) OUTPUT to LPCM 48K or LPCM 96K. The higher the
sampling frequency is, the better the output audio quality.
12
DV352
Disc Symbols and Properties
SUBTITLE Language Setup
Select one of the following preferred SUBTITLE options using the the / buttons (29): ENGLISH,
FRENCH, SPANISH, CHINESE, JAPANESE, GERMAN, ITALIAN, PORTUGUESE.
Table 1: Disc Properties
DISC MENU Language Setup
Symbol
Select one of the following preferred DISC MENU language options using the the / buttons (29):
ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE, GERMAN, ITALIAN, PORTUGUESE.
PARENTAL Settings
Select a suitable parental guidance setting using the the / buttons (29), then confirm by
pressing the OK button (30) on the remote control. The parental rating options are as follows: 1 G,
2, 3 PG, 4 PG 13, 5 6 PG-R, 7 NC-17, 8 ADULT, NO_PARENTAL.
PASSWORD Change
12cm Disc Properties
Max Play Time
Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)
(MPEG 2 Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer (Video CD)
(MPEG 1 Method)
74 minutes
Single side single layer
74 minutes
Single side single layer
74 minutes
To change the password:
1.
Select “CHANGE” then press the OK button (30) on the remote control.
2.
OLD PASSWORD: Type the old password (the default factory code is 3308).
3.
NEW PASSWORD: Key in a 4 character password.
4.
CONFIRM PWD: Retype the new password.
5.
Press the OK button to confirm and return to the previous menu.
Table 2: DVD Disc Symbols
Symbol
DEFAULTS Reset
Number of voice languages recorded. The number inside the icon indicates the number languages on the disc (maximum of 8).
Select “RESET” to revert to default (initial) factory settings.
Number of subtitle languages available on the disc (maximum of 32).
SMART NAV Menu
•
•
Meaning
Select “WITH MENU” to display the smart navigation menu while playing an MP3 disc. With
this option, you can select a track to play according to the menu hint.
Number of angles provided (maximum of 9).
Select “NO MENU” to play an MP3 directly when inserted.
Custom LOGO
Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the
example on the left, the 16:9 video can be converted to Letter Box video.
You can use this feature to add a custom logo that will appear on the video screen when the unit is
turned on. To add a custom logo:
1.
Select “CUST LOGO” from the LOGO menu.
1.
Insert a disc with the logo, in JPEG format, into the disc drive on the DVD player. (NOTE: The
logo must be in the JPEG format.)
2.
Select the desired picture, press the button (6), then press the TITLE button (32). The
current picture is stored in the unit and “LOGO IS COPIED” appears on the screen.
Indicates the region code where the disc can be played.
• Region 1: USA, Canada, East Pacific Ocean Islands
• Region 2: Japan, Western Europe, Northern Europe, Egypt, South Africa, Middle East
• Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia, South-East Asia
• Region 4: Australia, New Zealand, Middle and South America, South Pacific Ocean
Islands/Oceania
• Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North Korea, North
Africa, North-West Asia
• Region 6: Mainland China
• ALL: All regions
Select “ORIG LOGO” to return the default image.
NOTE: The following types of discs will not play in this unit: DVD-ROM, DVD-RAM, CDV,
CD-G. DVD-R discs WILL play in this unit.
13
DV352
TROUBLESHOOTING
Problem
Unit will not power on
Cause
Corrective Action
Radio Fuse blown
Install new fuse with correct rating
Car battery fuse blown
Install new fuse with correct rating
Illegal operation
Press the RESET button located in the bottom right corner of the front panel
Remote control does not function
Battery depleted
Replace battery with new one
Battery installed incorrectly
Remove battery and install correctly
Poor sound quality or distortion
Pirated disc is in use
Use original copy
Unit resets itself when engine is off
Incorrect connection between ACC and positive battery
wire
Check wiring and correct
Cannot insert disc
Disc already inside unit
Eject current disc and insert new one
Disc does not play back
Disc is warped or scratched
Use disc in good condition
Disc is dirty or wet
Clean disc with soft cloth
Laser pickup is dirty
Clean laser pickup with cleaning disc
Incompatible disc is used
Use compatible disc
Disc region code is not compatible with unit
Use disc with proper region code
Disc is inserted upside down
Insert disc with label side up
Image blurred, distorted, or dark
Disc is illegally copied
Use original disc
PBC cannot be used during VCD playback
PBC is not available on the disc
No repeat or searching while playing VCD
PBC is on
Turn PBC off
Care and Maintenance
•
Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A
rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration.
•
Do not get water or cleaning fluids on the unit.
•
If the temperature inside the player gets too hot, a protective circuit automatically stops play
of the disc. If this occurs, allow the unit to cool before operating the player again.
•
Never insert anything other than a 5” (12 cm) compact disc into the player as the mechanism
can be damaged by foreign objects.
•
Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without an adaptor,
as damage to the player and/or disc may occur. Such damage is not covered by the Warranty
on this product.
•
The ventilation should not be impeded by covering the ventilation openings with items such
as newspapers, table-cloths, curtains, etc.
14
•
The DVD player may not operate properly in extreme hot or cold. If such conditions occur,
allow the interior of the vehicle to reach a normal temperature before using player.
•
When the vehicle warms up during cold weather or under damp conditions, condensation
may appear on the LCD panel. Should this occur, the screen will not operate properly until the
moisture has evaporated.
•
We suggest you use a cleaning disc in this unit more frequently than in the unit in your home
due to the environmental conditions of the vehicle.
DV352
Specifications
Limited Warranty
Supply Voltage: 12V DC (11V-15V), test voltage 14.4V, negative ground
Current Consumption: Less than 2A
Signal System: Composite video 1.0Vp-p 75Ù
Discs Played:
1. DVD-VIDEO disc
•
5” (12 cm) single-sided, single-layer
•
5” (12 cm) single-sided, double-layer
2. Compact disc (CD-DA/CD-R/CD-RW/MP3)
3. 5” (12 cm) VIDEO CD
Audio Output Level: 10kÙ (2 ch 2.0 Vrms)
Audio Signal Output:
•
Frequency response: 20Hz~20kHz
•
S/N ratio: 80dB(JIS)
•
Wow and Flutter below measurable limits
90 Day / 12 Month Limited Warranty
AUDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail
purchaser of this product that should this product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship within 90 days from the date of original
purchase, such defect(s) will be repaired or replaced (at the Company's option) without charge for
parts and repair labor. After the initial 90 day period and for a period of 12 months from the date of
the original purchase, the Company will supply at no charge a replacement for any defective
part(s).
To obtain repair or replacement within the terms of this warranty, the end user should contact the
O.E.M. The product is to be delivered to the OEM or original place of purchase, with proof of
warranty coverage (e.g. dated bill of sale, and serial number of the unit, and vin#), specification of
defect(s), transportation prepaid, to an approved warranty station. This warranty does not extend
to the elimination of externally generated static or noise, to the correction of antenna problems, to
costs incurred for removal or reinstallation of the product, or to damage to any tapes, cd's, dvd's,
speakers, accessories, or electrical systems. This warranty does not apply to any product or part
thereof which, in the opinion of the Company, has been damaged through alteration, improper
installation, mishandling, misuse, neglect, or accident. THE EXTENT OF THE COMPANY'S
LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE, AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT.
This warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE
DURATION OF THIS WARRANTY. ANY ACTION FOR BREECH OF ANY WARRANTY
HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 30 DAYS FROM THE DATE OF ORIGINAL PURCHASE. IN
NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREECH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED
WHATSOEVER. No person or representative is authorized to assume for the Company any
liability other that expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
15