Aspire Digital AD-N820B DVD Player User Manual

OWNER'S MANUAL
MODEL:AD-N820B
POWER
OPEN/CLOSE
PROGRESSIVE SCAN DVD PLAYER AD-N820B
ON
OFF
DVD/CD/MP3/CD-R/CD-RW/JPEG/KODAK PICTURE CD PLAYER
TABLE OF CONTENTS
BEFORE USE
Safety Precautions
Important Safety Instructions
Notice
Disc Protection
Playable Discs
Accessories
01
03
04
04
05
05
SUBTITLE
TITLE
ANGLE
SEARCH
VOLUME and MUTE
REPEAT
MENU
ZOOM
PROGRAM
AUDIO
A-B REPEAT
10
10
10
10
10
10
10
10
10
11
11
CONTROL and CONNECTION
Panel
Basic connection
Remote control
06
07
08
JPEG Disc Playback
MP3 Playback
Kodak Picture Disc Playback
BASIC PLAYBACK
Preparations
Basic Playback
Stop Playback
Previous and Next
Fast forward and Fast reverse
Pause/Step Playback
09
09
09
09
09
09
Advanced Playback
OSD
V.MODE
SPECIAL FUNCTION PLAYBACK
10
10
11
11
11
REFERENCE
System Setup
Trouble Shooting
DVD Characteristics
Special Function of DVD
Function Supported by DVD Discs
Specification
12
17
18
19
19
20
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage " within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The symbol for CLASS II (Double Insulation).
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE, DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET, REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION:
When replace the direct plug in power supply or a separable, cord-connected power
supply, the replacement must be exact duplicate, or one recommended by the manufacturer.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
This Digital Video Disc player employs a laser System.
Use of controls, adjustments or the performance of procedures other than those
specified may result herein hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when
open and interlocks defeated.
DO NOT STARE INTO BEAM.
01
SAFETY PRECAUTIONS
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rule. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, these is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-ference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product incorporates copyright protection technology that is protected by
method claims of certain U. S. Patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible
with this product and may cause artifacts to be displayed in the picture.
In case of 525 or 625 progressive scan picture problems, it is recommended that he
used switch the connection to the "standard definition" output. If there are questions
regarding our TV set compatibility with this model 525p and 625p DVD player, please
contact our customer service centre.
Manufactured under license from Dolby Laboratories. " Dolby " and the double-D
symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
NOTE:
There are a clear film on the front panel in order to prevent panel from scratch and dirt.
If no need, just tear it out from the corner.
02
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS MANUAL AND
THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
03
The pickup may be condensed with water under the
following situation.
04
PLAYABLE DISCS and ACCESSORIES
The following discs can be played:
Designed for
Windows
TM
MediaTM
Discs than those listed above can not be played.
Non-standardized discs, even if they may be labeled as above can not be played.
The performance of recorded disc is depend on the method and quality of disc-burning. In some cases,
the disc may not be played.
ACCESSORIES
Audio/Video cable ................... 1
Remote control ........................ 1
Owner's manual ...................... 1
STANDBY
OPEN/CLOSE
OSD
MENU
1
2
3
4
5
6
7
8
V.MODE
SUBTITLE
TITLE/PBC
ANGLE
OWNER'S MANUAL
9
SEARCH
SETUP
0
10+
ZOOM
PROG
MODEL:AD-N820B
PREV
F.REV
POWER
NEXT
DVD/CD/MP3/CD-R/CD-RW/JPEG/KODAK PICTURE CD PLAYER
OFF
Owner's manual
05
F.FWD
OPEN/CLOSE
PROGRESSIVE SCAN DVD PLAYER AD-N820B
ON
STOP
PAUSE/STEP
MUTE
REPEAT
VOLUME
A-B RPT
AUDIO
PANEL
FRONT PANEL
1
PLAY/PAUSE
2
3
4
STOP
PREV
NEXT
POWER
OPEN/CLOSE
DVD/CD/MP3/CD-R/CD-RW/JPEG/KODAK PICTURE CD PLAYER
PROGRESSIVE SCAN DVD PLAYER AD-N820B
ON
OFF
6
5
7
9
8
6.TRAY
7. REMOTE CONTROL SENSOR
8.LED SCREEN
9. OPEN/CLOSE
1.PLAY/PAUSE
2.STOP
3.PREVIOUS
4.NEXT
5.POWER SWITCH
REAR PANEL OUTPUT
Y
DIGITAL AUDIO OUT
L
CB / PB
COAXIAL
R
2-CH AUDIO OUT
1
OPTICAL
2
S-VIDEO
VIDEO
CR / PR
3 4 5
6
VIDEO OUT
Apparatus Claims of
U.S. Patent Nos.
4,631,603; 4,577,216;
4,819,098 and 4,907,093
licensed for limited
viewing uses only.
DVD PLAYER
MODEL: AD-N820B
S/N:
AC:110V-240V~ 50/60Hz
POWER: 15W
PRODUCT IS CERTIFIED BY
THE MANUFACTURER TO
COMPLY WITH DHHS RULES
21 CFR, SUBCHAPTER J
APPLICABLE AT THE DATA
OF MANUFACTURE
1. 2 CHANNELS OUTPUT
2. OPTICAL FIBRE OUTPUT
3. S-VIDEO OUTPUT
Manufactured under license from
Dolby Laboratories. "Dolby" and the
double-D symbol are trademarks
of Dolby Laboratories. Confidential
unpublished works. Copyright 19921997 Dolby Laboratories. All rights
reserved.
CLASS 1 LASER PRODUCT
110V-240V~ 50/60Hz
CAUTION
Tested To Comply
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4. COAXIAL OUTPUT
5. VIDEO OUTPUT
6. Y, CB/PB, CR/PR OUTPUT
LED DISPLAY of DVD
5
1 2 3 4
With FCC Standards
For Home or Office Use
6
7
6.Rotate playback indicator
7.Multi-functional indicator
(indicates operating status
or messages, etc.)
1. DVD disc indicator
2. Play discplay
3. CD in display
4. Pause display
5. Dolby flag
06
BASIC CONNECTION
BASIC CONNECTION
Connecting to a TV with Audio/Video cable
DIGITAL AUDIO OUT
L
Y
CB / PB
VIDEO
CR / PR
COAXIAL
R
OPTICAL
2-CH AUDIO OUT
S-VIDEO
VIDEO OUT
To video input(yellow)
To audio inputs(red, white)
To S-video output
To S-video input
If the TV has an S-video input, connect the DVD player with an S-video cable.
When using an S-video cable, do not connect the yellow video cable.
Connecting to a audio system and TV equipped with YUV video input
DIGITAL AUDIO OUT
L
Y
CB / PB
VIDEO
CR / PR
COAXIAL
R
OPTICAL
2-CH AUDIO OUT
S-VIDEO
VIDEO OUT
To CR/PR video output
To CB/PB video output
To Y video output
To CR/PR video input
To CB/PB video input
To audio inputs of the amplifier
To Y video input
Connecting to an amplifier equipped with a digital audio input and TV
DIGITAL AUDIO OUT
L
Y
CB / PB
VIDEO
CR / PR
COAXIAL
R
OPTICAL
2-CH AUDIO OUT
To CR/PR video output
To CB/PB video output
Optical digital cable
VIDEO OUT
To Y video output
To OPTICAL
type digital
audio input
Connect either
To COAXIAL
type digital
audio input
S-VIDEO
To CR/PR video input
To CB/PB video input
Coaxial cable
To Y video input
07
REMOTE CONTROL
REMOTE CONTROL
Function
1
STANDBY
OSD
MENU
OPEN/CLOSE
2
16
17
V.MODE
3
1
2
3
4
5
6
SUBTITLE
4
TITLE/PBC
7
5
ANGLE
9
SEARCH
6
7
8
9
10
8
SETUP
0
10+
ZOOM
PROG
19
20
PREV
F.REV
F.FWD
NEXT
11
STOP
PAUSE/STEP
VOLUME
12
13
14
15
18
MUTE
REPEAT
A-B RPT
AUDIO
21
22
23
24
25
Function
1. OSD(On Screen Display)
14. MUTE
2. STANDBY
15. REPEAT
3. V.MODE
16. MENU
4. SUBTITLE
17. OPEN/CLOSE
5. TITLE/PBC
18. DIGITS AND 10+ BUTTONS
6. ANGLE
19. ZOOM
7. SEARCH
20. PROGRAM
8. SETUP
21. PREVIOUS
9. ENTER/PLAY
22. FAST FORWARD
10. CURSOR
23. NEXT
11. FAST REVERSE
24. VOLUME+/-(Volume control)
12. STOP
25. AUDIO
13. PAUSE/STEP
26. A-B REPEAT
26
Loading Batteries
STANDBY
OSD
MENU
OPEN/CLOSE
V.MODE
1
2
3
4
5
6
7
8
SUBTITLE
TITLE/PBC
ANGLE
9
SEARCH
SETUP
0
10+
ZOOM
PROG
PREV
F.REV
08
F.FWD
STOP
PAUSE/STEP
MUTE
REPEAT
NEXT
VOLUME
A-B RPT
AUDIO
Distance: About 7m (23 feet) from the
front of the remote sensor.
Angle:
About 300 in each direction
of the front of the remote
sensor.
BASIC PLAYBACK
Previous and Next
Preparations
During playing, press PREV
key can back to start
of this chapter, then each press this key will skip a
chapter still the start of the disc.
Each press of NEXT
key during playing will skip
the current chapter and play the next one.
When you want to view a disc, turn on the TV and
select the video input connected to the DVD player.
Basic playback
1. Press POWER switch on the front panel to ON,
the DVD player turns on, the TV screen will display
the start logo and DVD indicator light. If a disc is
already in the tray, it will begin to play once the
power is on.
2. Press OPEN/CLOSE
to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
3. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some discs may not playback automatically,
you can press ENTER/PLAY button to start
playback.
4. Some discs may start playback with a menu,
use the cursor button on the remote control to
select menu options and press ENTER/PLAY to
start, or press digits to select a menu options
directly.
Fast forward and Fast reverse
1. Press F.FWD
to fast forward through the disc.
Each time the F.FWD
button is pressed, the
fast forward motion speed changes.
2. Press ENTER/PLAY to resume normal playback.
3. Press F.REV
to fast reverse through the disc.
Each time the F.REV
button is pressed, the
fast reverse motion speed changes.
4. Press ENTER/PLAY to resume normal playback.
Pause/Step playback
1. Press PAUSE/STEP
first time to pause playback (still mode). The sound will be muted during
still mode.
2. Press PAUSE/STEP
continuous to single step
forward to the next frame in the video.
3. Press ENTER/PLAY resume normal playback.
NOTES:
Stop playback
1.
1. Press STOP
button to go to stop mode, the TV
screen will show the start logo. As some disc the
player can recall the location where stopped, such
as DVD.
2. Press ENTER/PLAY to playback to resume playback from the location where playback is stopped
or from the beginning of the disc.
3. Press STOP twice to stop completely.
2.
09
ADVANCED PLAYBACK
IMPORTANT NOTE:
ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION
AND DISPLAY ON SCREEN WILL BE DIFFERENT.
SEARCH
OSD
Follow this operation :
first
Title 02/10 Time : :
twice
Title 02/10 Chapter /32
third
Chapter 01/32 Time : :
According to operation, you could choose point that
you want to play.
Press this button and the screen will display some
information about disc, such as : " Title Elapsed " ,
" Title Remain ", " Chapter Elapsed ", " Chapter
Remain " and " Display Off ".
V.MODE
This button can set VIDEO output among "CVBS",
"YUV" or "P-Scan".
Note: The screen disappear when press this button,
press this button continuously until the screen turn
normal.
VOLUME and MUTE
Press " + " at the right of VOLUME to increase
volume, " - " to decrease to volume. The first press
of MUTE will display MUTE (no voice), the second
press will return to normal playback.
SUBTITLE
REPEAT
Press this button and the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
Follow this operation :
first
Chapter
twice
Title
third
All
the fourth pressed will cancel repeat.
TITLE
MENU
According to some DVD discs, press this button will
display "Title Menu", the unit will play from the disc
head or you can use digits to select tracks preferred.
(Depending on DVD)
Press this button and the screen will display " Root
Menu ", select item according to your preference.
(This key is valid to DVD disc possessing multi-layer
menu.)
ANGLE
PROGRAM
For discs with this feature, pressing this key to view
action from different angles.(Depending on the DVD)
ZOOM
Each time pressed, the picture enlarges.
In this mode, you can move the picture with CURSOR
button.
10
Press this button and the screen will display info
window , press digits button to input the program
number what you want, when finished, move the
cursor to select the " Start " logo, at this time the unit
will start program playback and the screen will display
"Program" logo.
If you want to cancel this function, press " STOP "
and then press "ENTER/PLAY" .