User manual | ASRock K8NF3-VSTA Computer Hardware User Manual

PD-3020
User Manual
Please read this User Manual carefully to ensure proper use of this product and
keep this manual for further reference.
Content
Introduction
Safety Precautions
2
Important Safety Instructions
3
Panel Illustration
5
Remote Control
6
Connections
Connecting to a TV set
7
Connecting to an AV Receiver with Digital Audio Input
8
Basic Playback
9
Basic Operation
Advanced Features
Modes and Features Setup
10
Remote Control Operation
15
MP3 Playback
24
KODAK Picture CD playback
25
Others
Troubleshooting
26
Specifications
27
Macrovision function instruction
27
-1-
Safety Precautions
Introduction
CAUTION:
CAUTION
THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ
THIS MANUAL CAREFULLY AND KEEP IT FOR
FUTURE REFERENCE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE UNIT'S CABINET THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.
IF THE UNIT REQUIRES SERVICING, CONTACT
THE SELLER OR SEE "TROUBLESHOOTING".
Specifications
Type
Model
PD-3020
Play mode
NTSC/PAL
Disc mode
DVD, CD, MP3, CD-R, CD-RW, JPEG, DVD-R/W
Video characteristic
TO PREVENT DIRECT EXPOSURE TO THE
LASER RADIATION, DO NOT OPEN THE
CABINET. VISIBLE LASER MAY RADIATE
WHEN THE CABINET IS OPENED OR THE
INTERLOCKS ARE DEFEATED. DO NOT
STARE INTO THE LASER BEAMS.
Video S/N ratio
65dB.
Resolution
500 lines.
Audio characteristic
Frequency response
THE EXCLAMATION POINT WITHIN AN
E Q U I L AT E R A L T R I A N G L E I S
INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
MANUAL ACCOMPANYING THE UNIT.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
NEVER ATTEMPT TO OPEN THE CABINET,
DANGEROUS HIGH VOLTAGES ARE PRESENTED
IN THE UNIT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE- BLADE PLUG WITH WIDE SLOT AND
FULLY INSERT.
THE APPARATUS SHALL NOT BE EXPOSED
TO WATER AND NO OBJECTS FILLED WITH
LIQUID SUCH AS VASES SHALL BE PLACED ON THE APPARATUS.
Other
fs 96KHz: 20Hz-20KHz:+/-1dBI
CAUTION:
Audio S/N ratio
90dB
THE DVD VIDEO PLAYER IS A CLASS 1 LASER
PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD
VIDEO PLAYER IS HARMFUL TO THE EYES, DO
NOT ATTEMPT TO DISASSEMBLE THE
CABINET.
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
Dynamic range
90dB
Distortion
< 0.01%
D/A Converter
96KHz/24bit
Output characteristic
Video output
1Vp-p(75 W)
Audio output
COAXIAL, 2CH
WARNING:
Power Voltage
DC IN 12V
FCC REGULATIONS STATE THAT ANY CHANGE
OR MODIFICATION TO THE EQUIPMENT, NOT
EXPRESSLY APPROVED BY MAKER OR ITS
AUTHORIZED PARTIES, COULD VOID USER'S
AUTHORITY TO OPERATE THIS EQUIPMENT.
Power consumption
10W
Size
205x158x40mm
Weight
0.7kg
Specifications are subject to change without notice.
Accessories:
1. Remote controller 1 pcs
2. Audio/Video cable
4. Adapter 1 pcs
(check that all accessories are included )
-2-
-27-
1 pcs
3. User,s manual
1 pcs
Troubleshooting
Other
If you have any questions, please consult the troubleshooting guide below.
NO PICTURE OR SOUND
"BAD DISC" DISPLAYED
Ensure the power button is on.
Ensure the disc is not warped, damaged or deformed.
Ensure the power outlet is operational.
Ensure the disc is not badly stained or damaged.
Ensure the power cord is not damaged.
Ensure the disc format is compatible with the player.
Ensure the power plug is connected firmly to the
Please check whether you have tried to play a software CD.
outlet.
If so, please restart the player.
REMOTE NOT WORKING
PICTURE BUT NO SOUND
Ensure the audio jacks are securely connected.
Ensure the audio connector is not damaged.
Ensure the remote batteries are working.
Point the remote control directly at the player's IR
Ensure the volume is turned up in VOL/CH setup.
Ensure you have set the player's AUDIO settings correctly.
Ensure you have ENTERed the correct AV input for your TV.
sensor.
Remove any obstacles between the remote and
the IR sensor.
Ensure the audio is not set to mute.
UNIT NOT WORKING
SOUND BUT NO PICTURE
Ensure the video jacks are securely connected.
Turn off the power, and then turn it on again.
Ensure you have ENTERed the correct AV input for your TV.
Ensure the video connector is not damaged.
Ensure you have set the player's VIDEO settings correctly.
"NO DISC" DISPLAYED
Ensure you have put the disc on the tray.
Ensure the disc is not upside down.
POOR PICTURE OR SOUND
Ensure you have set the player's AUDIO settings correctly.
Ensure the disc is not distorted, stained or
Important Safety Instructions
10. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
11. Power Sources
This product should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supply to your home,
consult your product dealer or local power company.
For products intended to operate from battery power
or other sources, refer to the operating instructions.
4. Follow Instructions
All operating instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
12. Grounding or Polarization
This product may be equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water for example, near
a bathtub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
13. Power Cord Protection
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
where they exit from the product.
8. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product
should follow the manufacturer's instructions, and
should use a mounting accessory recommended by
the manufacturer.
9. Portable Cart Warning
A product and cart combination should be moved with
care. Quick stop, excessive force, and uneven
surface may cause the product and cart combination
to overturn.
scratched.
Ensure the disc is not scratched or stained.
Ensure the AV connector or the output terminal is not
damaged.
(Symbol provided by RETAC)
-26-
Introduction
-3-
Important Safety Instructions
Introduction
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to
the product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of
the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antennadischarge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See figure
below.
19. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
20. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A)When the power-supply cord or plug is damaged,
B)If liquid has been spilled, or objects have fallen
into the product,
C)If the product has been exposed to rain or water,
D)If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation,
E)If the product has been dropped or damaged in
any way.
F)When the product exhibits a distinct change in
performance this indicates a need for service.
21. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
15. Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and
power lines surges.
22. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
16. Power Lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
23. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only
as recommended by the manufacturer.
24. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Kodak Picture CD Playback
Advanced Features
The introduction of KODAK Picture CD
A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking
the box on the photo finishing envelope when you drop off a roll of film (35 mm or Advanced Photo System (APS)
color print film) at the time of processing in Kodak Express store displaying "Kodak Picture CD" sign. When your
order is returned, you receive your prints, negatives, and your full roll of pictures safely stored on your KODAK
Picture CD. Each KODAK Picture CD brings you the tools to enhance, share and manage your pictures on your
computer. You also can record the JPEG picture into CD-R or CD-RW with the CD-Rewriter yourself.
Note: 1. The Max. Size of JPEG Picture can be supported: 3840X3840 pels
2. JPEG stands for Joint Picture Experts Group. It is the first International Standard on Still Picture
Compressing: ISO 10918-1, constituted by the Committee on Still Picture Compressing Standard of ISO.
The pictures on KODAK Picture CD are stored in this format (JPEG). This player can decode the JPEG
pictures in KODAK Picture CD and playback the pictures in different modes.
Now, you can playback Kodak Picture CDs on this player and view your wonderful pictures on your TV in the
comfort of your living room.
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the Kodak
Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen.
General function:
You can set slideshow transition modes for any pictures.
Press PAUSE to stop playing.
Press
or
to see the previous or next picture.
Press PLAY to continue slideshow transitions.
Press STOP to return to root menu.
Image Rotation
There are three modes to rotate a picture: original, 90 Deg, and 180 Deg. These operations are
allowed only when a picture is being displayed normally and will be cancelled automatically
when a new picture is displayed. The ANGLE keys are used to select the different rotation modes:
Press ANGLE
OSD display
Press ANGLE again
OSD display
original.
90 Deg.
Press ANGLE again
OSD display
180 Deg.
17. Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles, as this can result in a
risk of fire or electric shock.
Zoom Function:
18. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
This player provides both Zoom in/out and Zoom pan function. Press the ZOOM
consecutively, the picture will zoom in/out in turn as followings:
Q4/3
Q3/2
Q2
Qoff
Q1/2
Q1/4
Note: During the ZOOM function, slideshow transitions and image rotation are disabled.
Q off: close zoom, press PLAY again to resume slideshow transition mode.
-4-
-25-
MP3 Playback
Advanced Features
Panel Illustration
Supported formats
Disc format: ISO 9660, Joliet
Music file format: MP3
MP3 bit rate (data rate): 32 -192 kbps
Total number of music files and albums: around 350 per disc.
Sampling rate: (CBR)32kHz/44. 1kHz/48kHz/64kHz; (VBR) 16kHz/22kHz/24kHz/32kHz (MPEG )
Note: The player will not identify or play MP3 discs under the following conditions: recording format is not supported,
badly scratched or deformed disc, MP3 recorded in CD-R or CD-RW which is not finalized, or a dirty pickup.
When a MP3 disc is loaded, the screen will display as follows:
Introduction
1
1
LCD DISPLAY
2
SPEAKER RIGHT
3
SPEAKER LEFT
4
DISC TOP
5
OPEN DISC TOP
6
OPEN LCD DISPLAY
7
SENSOR
8
MENU BUTTON
9
16:9/4:3 SELECT BUTTON
10
SETUP BUTTON
12
LEFT/REV BUTTON
13
UP BUTTON
14
RIGHT/FWD BUTTON
15
ENTER BUTTON
Total tracks
MP3
0:00:01
056/140
CDA
Elapsed time of
the current track
2
Current track
Directory
FUNCTION BUTTON
11
3
A01
7
A07
2
A02
8
A08
3
A03
9
A09
4
A04
DC IN 12V
D
R
LAYE
3P
DIGITAL VIDEO
SETUP
4
9
10
OUTPUT
FUNCTION
22
8
MP
D/
DIGITAL AUDIO
File: A01
16:9 / 4:3
23
INPUT
/C
A06
MENU
VIDEO
E
21
24
11
TM
12
13
AUDIO
File window
VD
6
A05
PO
RT
AB
L
25
COAXIAL
5
File name
POWER
ON OFF
1
26
14
27
15
Press
to select the file when the cursor appears in the file window.
Press ENTER to play the current file selected by the cursor.
Press
to switch between the directory window and the file window.
Note: During MP3 playback, Forward Scan and Reverse Scan are not available.
17
5
VOLUME
16
18
19
20
6
7
-24-
16
DOWN BUTTON
24
VIDEO JACK
17
PREV BUTTON
25
AUDIO JACK
18
NEXT BUTTON
26
COAXIAL OUTPUT JACK
19
STOP BUTTON
27
EARPHONE JACK
20
PLAY/PAUSE BUTTON
28
VOLUME KNOB
21
POWER
22
DC 12V INPUT JACK
23
INPUT/OUTPUT SELECT
-5-
28
Remote Control
Introduction
1
1
PROGRAM
18
PLAY/PAUSE
2
MUTE
19
DISPLAY
3
NTSC/PAL
20
TFT POWER ON/OFF
4
SUBTITLE
21
NUMBER KEY SELECT
5
LANGUAGE
22
TIME
6
ANGLE
23
SETUP
TFT
MUTE
PROG
DISPLAY
3
N/P
1
2
3
4
SUBTITLE
4
5
6
20
ON/OFF
21
5
LANGUAGE
7
8
9
6
ANGLE
0
10+
TIME
22
SETUP
23
7
8
24
ENTER
9
STEP
10
25
26
FUNCTION
11
7
UP
24
RIGHT
8
ENTER
25
STEP
9
LEFT
26
FUNCTION
10
DOWN
27
REPEAT
11
TITLE
28
A-B REPEAT
12
MENU/PBC
29
ZOOM
13
L/R CHANNEL
30
SLOW
14
Resume
31
PREV
27
MENU/PBC
TITLE
REPEAT
28
A-B
13
14
Advanced Features
16:9/4:3
19
2
12
Remote Control Operation
29
Resume
L/R
ZOOM
31
15
FORWARD
32
NEXT
16
32
16
REV
33
VOLUME -
17
33
17
STOP
34
VOLUME +
VOL-
TFT ON/OFF
Press TFT ON/OFF key to TFT-LCD display
press it again to TFT-LCD turn off.
30
SLOW
15
18
Switch the display mode of 16:9 or 4:3 format.
34
VOL+
L/R
Using the Remote Control
Point the remote control at the remote sensor in order for the player to function correctly. The
remote will function to approximately 21' from the remote sensor at an angle of approximately
30 each direction.
Note: Directing the remote sensor toward any light source, such as direct sunlight, may cause
the unit to malfunction. Do not spill water or put wet items on the remote control. Never
disassemble remote control.
When a DVD is played, the active dubbing language will
be shown. When a SVCD or VCD is played the left track, right
track or stereo will be displayed accordingly.
When a bilingual story VCD is played, you may press the
button to select the language desired.
CR2025
HOW TO REPLACE THE BATTERY
STEP 1: PUSH THE BUTTON TOWARD LEFT;
STEP 2: PULL THE BATTERY LOADER OUT.
1
2
BATTERIES
INCORRECT USE OF BATTERIES MAY CAUSE THEM TO LEAK, CORRODE OR EXPLODE.
Be sure to place the batteries in the correct direction.
It is dangerous to charge/heat/open or short-circuit the batteries.
Do not leave dead or expired batteries or mix old/new batteries.
When not using the remote control for a long duration of time, remove the batteries. When
operating range becomes reduced, replace all batteries with new, fresh ones.
If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then
replace.
-6-
-23-
Remote Control Operation
Advanced Features
Connecting to a TV Set
Connections
ZOOM
Q2
Q3
During DVD playback
Press ANGLE to view scenes from different camera angles.
Press ANGLE repeatedly to change from one camera angle to
another.
Note: This function is disc specific.
COAXIAL
ANGLE
AUDIO
VIDEO
INPUT
OUTPUT
Q Off
DC IN 12V
Q1
POWER
ON OFF
During DVD playback, press ZOOM to magnify the image as
follows:
RED
WHITE
Yellew
VIDEO IN
VOLUME
AUDIO IN
LANGUAGE
During DVD playback
Press LANGUAGE repeatedly to select from up to 8 audio
languages/formats.
Note: This function is disc specific.
SUBTITLE
During DVD playback
Press SUBTITLE repeatedly to select from up to 32
subtitle languages.
Note: This function is disc specific (languages will vary).
-22-
-7-
Connecting to an AV Amplifier with Digital Audio Input
Connections
Remote Control Operation
Advanced Features
STEP
POWER
ON OFF
Press STEP during playback to pause playback.
Press STEP repeatedly to play frame.
INPUT
OUTPUT
DC IN 12V
Press play to resume normal playback.
COAXIAL
AUDIO
Coaxial cable
VIDEO
REPEAT
Select to press REPEAT to select Repeat Title, Repeat
chapter, Repeat off During DVD playback.
Press REPEAT to select Repeat Single, Repeat All and
Repeat off ( CD or Others).
VOLUME
Coaxial
VOL+ VOL-
Amplifier
Press Volume <VOL+> button to increase Volume
Press <VOL-> button to reduce volume till to no volume output.
VOLUME
INPUT SELECTOR
POWER
BYPASS
PRO LOGIC
3 STEREO
MODE
TEST
CHANNEL
KARAOKE
MUTE
UP
DOWN
BASS
1
MIC
2
1
MIC VOL
2
MIC
TREBLE
ECHO
EXCITE
Notes:
1. Select the Coaxial digital audio output.
2. Set the player's audio out to Raw or PCM mode .
3. Set the Amplifier to the AV input connected to the DVD player.
-8-
MUTE
Press MUTE to mute the Audio output
Press MUTE again to resume normal audio output
-21-
Remote Control Operation
Advanced Features
Basic Operation
Basic Playback
Preparation before playing:
PROG
While [PROGRAM] is on, press ENTER to display the [Program] submenu:
CD
Others
Input the track numbers in the order you would like them to
play. When finished, select [Play Program ] and then press
ENTER to play the tracks in the new programmed order.
Program Input
1 __
4__
7__
10 _ _
2__
5__
8__
11 _ _
3__
6__
9__
12 _ _
Play Program
Select [Clear All] and press ENTER to clear all the numbers
you have input.
Clear All
DVD
STEP 1 - Press POWER to
start the player. The DVD
logo appears on the TV
screen.
Input the title number and the chapter number in the desired
Program Input
Title / chapter
order. Then sele ct [Play Program ] and press ENTER to play
1 _ _:_ _ 4 _ _:_ _ 7 _ _:_ _ 10 _ _:_ _
the chapters in the order you have set.
2 _ _:_ _ 5 _ _:_ _ 8 _ _:_ _ 11 _ _:_ _
Select [Clear All] and press ENTER to clear all the numbers
3 _ _:_ _ 6 _ _:_ _ 9 _ _:_ _ 12 _ _:_ _
you have input.
Play Program
Clear All
Function
Push the Function button once, the following menu show in the
display screen: Sharpness, TINT, Color, Contrast, Brightness,
Rest and push the Function again select the Parameter you
wanted. Press the UP button or DOWN button adjust the
parameter till available.
-20-
STEP 2 - Push OPEN either on the
front panel or remote control. When
the tray is opened, place the disc on the
tray with the label side up. Push OPEN
again to close the disc tray.
-9-
STEP 3 - Press the PLAY button
on the front panel or remote control. The player will automatically read and identify the disc, and
begin playback.
Modes and Features Setup
Advanced Features
Remote Control Operation
Advanced Features
SETUP
PLAY/PAUSE
Press PLAY from stop mode to start playback.
Press PAUSE during playback to pause playback.
Press PLAY to resume normal playback.
This function is not available if the elapsed time of current
track is less than 10 seconds.
In stop mode, press SETUP, and the TV screen will display the Setup
Menu as follows:
Language
Video
Audio
Rating
Press
to change items
Note: MP3 discs and some DVD discs do not have a 10 second review feature.
Setup Menu
A. Press ENTER to display each submenu
MENU/PBC
B. Press SETUP to exit the Setup Menu
Language Setup
Note: This function is subject to the disc.
Select [Language] in the Setup Menu, and press ENTER to display the [Language] submenu:
Language
Press
to
select the menu
item
Video
OSD Menu
English
Subtitle
English
Audio
English
DVD Menu
English
Audio
During DVD, playback , press MENU to return to the program menu.
In the Setup Menu, press MENU to return to the main menu
or stop mode.
Any time, press MENU to cancel the current OSD or some menus
Rating
TITLE
During DVD playback, press TITLE to display the DVD title
A . Press ENTER or
B. Press
to go back one menu
C. Press
OR
Select [OSD Menu], and press ENTER or
Language
Video
menu or play the first title.
Note: This function is subject to the disc.
to set
repeatedly to return to the Setup Menu
to display the [OSD Menu] submenu :
Audio
Rating
OSD Menu
English
English
Subtitle
English
French
Audio
English
Spanish
DVD Menu
English
German
SLOW
Press slow repeatedly to slow motion playback at
variable speeds.
A . Press ENTER to confirm.
B. Press SETUP to exit the Setup Menu.
-10-
-19-
Remote Control Operation
Advanced Features
Modes and Features Setup
Advanced Features
Language Setup
During DVD or CD playback, press and hold
to scan forward.
The player will review the disc at 2, 4, 8 and 20 times normal speed
as follows:
X2
X4
X8
X20
Press PLAY to resume normal playback.
Select [Subtitle], and press ENTER or
Language
Video
to display the [Subtitle] submenu:
Audio
Rating
OSD Menu
English
Subtitle
English
English
Audio
English
DVD Menu
English
French
Spanish
German
Auto
Off
Press
to change your selection
Note: Subtitle languages vary by disc.
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Select [Audio],and press ENTER or
Language
During DVD or CD playback, press and hold
to scan in reverse.
The player will review the disc at 2, 4, 8 and 20 times normal speed as
follows:
X20
Video
to display the [Audio] submenu:
Audio
Rating
OSD Menu
English
Subtitle
English
Audio
English English
DVD Menu
English French
Spanish
German
Press PLAY to resume normal playback.
Press
to change your selection
Note: Audio languages vary by disc.
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Select [DVD Menu], and press ENTER or
Language
PREV
Press PREV to skip to previous chapter or track.
Video
OSD Menu
English
Subtitle
English
Audio
English
DVD Menu
English
Audio
to display the [DVD Menu] submenu:
Rating
English
French
Spanish
German
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
NEXT
Press NEXT to skip to the next chapter or track.
-18-
-11-
Press
to change your selection
Note: Menu languages vary by disc.
Modes and Features Setup
Advanced Features
Remote Control Operation
Advanced Features
TIME
Video Setup
Select [Video] in the Setup Menu, and press ENTER to display the [Video] sub menu :
Language
Press
to
select the menu
Video
Audio
During playback, press TIME, and the [Track Search] menu will display as follows:
Rating
CD
TV shape
16:9
TV system
NTSC
Search
item
A . Press ENTER or
B. Press
Time
-:--:--
Track
--
to set
to return to the Setup Menu
Select [TV shape], and press ENTER or
Language
Others
Video
to display the [TV shape] submenu:
Audio
DVD
Rating
TV shape
16:9
16:9
TV system
NTSC
4:3
Notes:
Search
Press
to change your selection
Time
Title / Chapter
Time searches for an exact time in
the movie.
-:--:--
In Title/Chapter mode, you cannot
--/--
SELECT a value outside the range of the
total number of titles or chapters .
For some DVD discs, the Search
function is unavailable.
A . Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
[4:3] -Letter Box refers to pictures where black bands appear at the
top and bottom.
[16:9] -The picture fills the screen of a wide-screen (16:9) television.
Note: Not all DVDs offer movies in Full Screen format. If not, the disc will override your
Use the number keys to input the desired Time, Title or Chapter, then press ENTER to confirm.
Press TIME again , the [Disc Search] menu will display as follows:
TV Display setting and the movie will be displayed in Letterbox format.
CD
Disc Search
Select [TV system] and press ENTER or
Language
to display the [TV system] sub menu :
Video
Audio
TV shape
16:9
TV system
NTSC
Time
-:--:--
Rating
NTSC
PAL
Press
to change your selection
AUTO
A . Press ENTER to confirm
B. Press SETUP to exit the Setup Menu.
-12-
-17-
Remote Control Operation
Advanced Features
Modes and Features Setup
Introduction
AUDIO SETUP
DISPLAY
Digital Output
During playback, press DISPLAY to display the current time counter position.
Digital out:ln this setup item, you can choose the digital output (SPDIF output).
Set Digital out to:
PCM To output 2 channel digital from the Coaxial digital audio outputs; e.g., to a Minidisc recorder.
0:00:10 0:04:45
Elapsed time of the current track/chapter
RAM To output the raw 5.1 channel digital bitstream form the coaxial digital audio audio outputs; e.g.,to an external amplifier.
Off To disable digital out.
Language
Video
Audio
Rating
Digital Out
RAW
PCM
LPCM 48KDS
OFF
RAW
OFF
Press DISPLAY again to display additional information about the playing disc.
CD
Others
LPCM 48KDS
Disc type
Other
Track 1/15
0:00:10
0:04:45
Elapsed time of the current track
Total tracks
Current track
This option sets the audio output format sent using the units optical digital andio output on you can tum on/off funetion.
in the linear PCM setting, on
means
the digital audio output maximun sampling rate is 48KHz
lf
off is selected,then the maximun output sampling rate is 96KHz and no conversion will take place.
Language
Video
Audio
Digital Out
RAW
LPCM 48KDS
OFF
Rating
OFF
ON
DVD
Disc type
Current title
Audio type
Subtitle
0:00:10 0:04:45
DVD
Angle 2/2
Title 1/10 Chapter 2/20
Audio
1 Eng
5.1Ch
Subtitle
1 Eng
-16-
Therefore, when the title s
encoding sampling rate is 96KHz,the output will be forced converted to 48KHz.
Elapsed time of the current title
Angle
Current chapter
-13-
Modes and Features Setup
Advanced Features
Remote Control Operation
Advanced Features
Rating Setup
The Rating menu allows you to block playback
of DVDs based on their ratings.
Language
Password
Video
Audio
Rating
----
Setting the Password & Rating Level
Rating
8. Adult
The DVD player allows you to block playback
LOAD Factory Reset
of inappropriate content with a passwordprotected Rating system (not all discs are rated).
A. From Stop mode, press SETUP.
B. Select Rating and press ENTER.
C. Select Rating and press ENTER repeatedly to set the rating from 1 (most restrictive)
to 8( least restrictive ).
If a password has already been set, the lock icon will be closed. You will not be
able to select Rating until you SELECT the correct password using the 0-9 keys.
D. Select Password.
E. Use the 0-9 keys to SELECT a 4-digit password and press ENTER. The lock icon will
close to indicate that the rating and password are set.
F. Press SETUP to save and exit.
Not all DVDs are rated.
DVDs that are rated higher than the level you select will not play without SELECTING
the correct password.
1:Kid Safe
2:G
3:PG
4:PG-13
5:PG-R
6:R
7:NC-17
8:Adult
0-10+ keys
These keys are used to input the time, as well as
title, chapter and track numbers.
When a numeric item is displayed on the screen,
press the 0-10+ keys to select the desired entry,
and press ENTER to confirm.
A-B
During playback, press A-B to select point A.
Press it again to select point B. The player will repeat the section from A
to B automatically.
Press A-B third time to cancel A-B repeat and clear points A and B.
If you forget your Rating password, select 8888 to clear the memory. Keep this password out of reach of children as if will always unlock the Parental Control setting.
Note: 1. During CD playback, points A and B must be within the same track.
During DVD playback, points A and B can be selected from different chapters.
2. This function is subject to the disc.
STOP
Press STOP during playback to stop and hold playback.
Press RUSEME to resume playback from the point you pressed STOP.
Note: T he screen saver will automatically turn on i f playback is
stopped about 5 minutes(when Screen Saver is set to on).
-14-
-15-
Download PDF

advertising