Atlona AT-LINE-PRO4-GEN2 Film Camera User Manual

Atlona 10 Input Scaler and Switcher
with a Single HDMI Output
AT-LINE-PRO4-GEN2
User Manual
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Table of Contents
1. Introduction ............................................................................................ 3
2. Package Contents ............................................................................................ 3
3. Features............................................................................................ 3
4. Specifications ............................................................................................ 4
5. Panel Descriptions a. Front Panel
............................................................................................ 4
b. Rear Panel
............................................................................................ 5
6. Remote Control ............................................................................................ 5
7. On Screen Display
............................................................................................ 6
8. RS-232 ............................................................................................ 7-11
10. Connection and Installation ............................................................................................ 8
11. Safety Information ............................................................................................ 9
12. Warranty ............................................................................................ 10
13. Atlona Product Registration ............................................................................................ 11
atlona.com
2
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Introduction
The Atlona 10-input Scaler and Switcher with a single HDMI Output allows four HDMI or DVI (using
a HDMI to DVI connector i.e. AT14050), three VGA, one component, one S-Video and one composite
video input to be scaled to a single HDMI output. The AT-LINE-PRO4 also gives you the flexibility to
add PAL or NTSC that may not be native to your display. The on screen display gives you the ability
to change audio, scaling, and resolution options. With additional functions such as RS-232 and IR
control the AT-LINE-PRO4 is easier than ever to control or integrate with a preexisting system.
Package Contents
• AT-LINE-PRO4
• 5V/2.6A DC power adaptor
• IR Remote Control
• Rack Ears
• User manual
Features
• Scaling any incoming Signal whether VGA, Composite, DVI or any other to the native resolution of
the display: VGA(640x480)~WUXGA(1920x1200) or 480p~1080p
• Analog to digital AV conversion
• PAL to NTSC and NTSC to PAL conversion 50/60Hz
• Digital and analog audio capabilities with HDMI out
• RS-232 commands available for control systems
• 3.5mm Stereo Audio out for connecting your audio to an amp (i.e. AT-PA100-G2)
• Learnable IR codes for universal remote controls
• Standard 1U size for easy rack mounting
• 3.5mm Audio jacks for audio embedding on HDMI inputs (Useful for DVI sources when used with
HDMI/DVI adapters)
• Horizontal and vertical shift, color, tint, brightness, contrast, detail, sizing, and top and bottom
vertical blanking adjustments
• VGA Inputs Supports following Resolutions: VGA(640x480) ~WUXGA(1920x1200) or 480p~1080p
• HDMI inputs support following resolutions: 480i~1080p and VGA (640x480)~WUXGA (1920x1200)
• Supports deep color of 8 / 10 / 12 bits per color (x3)
• On-Screen-Display allows users to fully adjust inputs/outputs preferences
• HDCP compliant
atlona.com
3
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Specifications
TMDS Clock Frequency
225Mbps
Input Ports4 x HDMI
7 x 3.5mm stereo audio
3 x VGA
1 x S-Video
1 x Component Video
1 x Composite Video
Output Ports1 x HDMI
1 x 3.5mm stereo audio port
Resolution outputs
Video: up to 1080p @ 60Hz
Vesa: up to 1920x1200
Dimensions (WxDxH)
17.16 x 6.57 x 1.92 (inch) or 436 x 67 x 49 (mm)
Weight
4.6 lbs or 2.1 kg
Temperature
Operating: 32°F to 104°F or 0°C to 40°C
Storage: -4°F to 140°F or -20°C to 60°C
Power consumption8.5W
Panel Description
Front Panel
1
2
3
4
5
6
7
8
9
10
1. POWER BUTTON: Press this button to turn on or set the device to standby mode. The LED will
illuminate red when the power is on.
2. IR RECEIVER: This IR window receives IR signal from the remote control included in the package.
3. CV: Press this button to select the composite video input source and the LED will illuminate red.
4. SV: Press this button to select the s-video input source and the LED will illuminate in red
5. COMP: Press this button to select the component video input source and the LED will illuminate
red.
6. VGA 1 through 3: Press VGA1, VGA2, or VGA3 to select input 1, 2, or 3. The LED will illuminate
red.
7. HDMI 1 through 4: Press the HDMI number to choose input 1, 2, 3 or 4. The LED will illuminate
red.
8. MENU: Press this button to bring up the On Screen Display.
9. -/+: Press -/+ buttons to make a selection.
10. ENTER: Press this button to confirm the selection.
atlona.com
4
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Back Panel
2
1
3
4
8
6
5
7
10
9
11
1. RS-232: Connect to a 3rd party control system or a computer with this port.
2. 3.5mm Stereo audio out - send stereo audio through to an amp (i.e. AT-PA100-G2)
3. HDMI Out - Connect to a display with HDMI or an HDMI to DVI connector (such as AT14048 which
has a compatible locking connector to secure the connection).
4. 3.5mm Stereo In - Audio in port used for audio when using an HDMI to DVI adapted source.
5. HDMI In - Connect the HDMI sources here or DVI sources with an HDMI to DVI adapter (i.e. AT-14050)
6. VGA In & Stereo In: These slots are for input sources such as Laptops, Desktop Computers,
Document Cameras or any other VGA source. Each VGA input is accompanied with a 3.5mm
stereo audio input.
7. Y/PB/PR & L/R In: This port is to connect an input source such as a DVD player, a Cables Box or an
HD Camera. The input is accompanied with a L/R RCA audio input.
8. COAX: This port is to embed digital audio signal from any source.
9. SV & L/R: These ports are to connect an S-Video source.
10. CV & Stereo In: These ports are to connect to input sources such as VCRs or Security Cameras.
11. DC 5V: This port is to connect to the supplied power supply.
Remote Control
7
1
2
3
8
4
5
6
atlona.com
9
1. Input Button: Press this before choosing the source to switch to.
2. Source Selection: Press to switch between sources.
3. Exit: Press to exit from a sub menu or main menu.
4. On Screen Display operation. Press to increase/decrease the setting
value of a selected parameter. OK (Enter): Press to confirm your selection.
5. Reset: Press the button to reset the unit’s firmware setting to the factory
default.
6. Output Resolution: Press to directly select output resolution. For other out
put resolutions that are not available on the remote please enter On
Screen Display Menu to select them.
7. POWER ON/OFF: Press these buttons to power on the device or to set it
to standby mode.
8. MENU: Press to bring up On Screen Display.
9. Auto Adjust: Press to optimize the position of the picture on the screen.
5
Toll free: 1-877-536-3976
Local: 1-408-962-0515
On Screen Display Menu
1st Tier Option
2nd Tier Option
Adjustment
Video
PICTURE MODE
USER / STANDARD / VIVID / MOVIE
CONTRAST
0 ~ 100 of Contrast Level
BRIGHTNESS
0 ~ 100 of Brightness Level
HUE
0 ~ 100 of Hue Level
SATURATION
0 ~ 100 of Saturation Level
SHARPNESS
0 ~ 100 of Sharpness Level
SCALE
OVERSCAN / UNDERSCAN / LETTERBOX/
PANSCAN / FULL
NR
LOW / MIDDLE / HIGH / OFF
EXIT
Back to the 1st Tier
COLOR TONE
USER / NORMAL / WARM / COOL
RED
0 ~ 100 of Red Color Level
GREEN
0 ~ 100 of Green Color Level
BLUE
0 ~ 100 of Blue Color Level
COLOR
EXIT
OUTPUT
OSD
Back to the 1st Tier
VGA (640x480)
480i
576i
WXGA (1280x800)
SVGA (800x600)
480p
576p
WSXGA (1680x1050
XGA (1024x768)
720p@60Hz
720p@50Hz
WUXGA (1920x1200)
UXGA (1600x1200)
1080i@60Hz
1080i@50Hz
WUXGA+ (1440x900)
SXGA+ (1400x1050)
1080p@60Hz
1080p@50Hz
1080p@30Hz
HPOSITION
0 ~ 100 of OSD Horizontal Position
VPOSITION
0 ~ 100 of OSD Vertical Position
TIMER
0 ~ 100 of OSD Show Time (sec.)
BACKGROUND (transparency)
0 ~ 100 of OSD Transparency Level
COLOR BAR
On: Color bar will display when the source is
disconnected
Off: After the source is disconnected, a black
screen will be active for 50 seconds before the
output signal is shut off
Timeon 15min: Once the source is
discontinued, a color bar will be active for 15
minutes before the output signal is shut off
AUDIO
EXIT
Back to the 1st Tier
SOURCE
HDMI / L/R / COAXIAL
DELAY
OFF / 40MS / 110MS / 150 MS
SOUND
ON / MUTE
EXIT
Back to the 1st Tier
INFORMATION
SOURCE (Input interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT
atlona.com
-
Close the OSD Menu
6
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Connection and Installation
Satellite Receiver
Blu-Ray
Laptop
Laptop
or
or
VCR
or
or
Computer
VCR
AT-PA100-G2
Computer
Camera
Projector
RS-232
Connection
RS-232 is connected through a 9-pin female D connector. The pins will have functions
associated with them, some will be unassigned.
No.
1
2
3
4
5
6
7
8
9
5 4 3 2 1
9 8 7 6
Baud Rate: 19200bps
atlona.com
Pin
---Tx
Rx
---Gnd
-------------
Data Bit: 8bits
Parity: None
7
Function
Not used
Transmit
Receive
Not used
Ground
Not used
Not used
Not used
Not used
Stop Bit: 1bit
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Note: Each command and feedback is terminated with a carriage return and linefeed.
Note: If the command fails or is incorrect the feedback should be “Command FAILED”
Set Commands
Command
S POWER 0
S POWER 1
S SOURCE 0
S SOURCE 1
S SOURCE 2
S SOURCE 3
S SOURCE 4
S SOURCE 5
S SOURCE 6
S SOURCE 7
S SOURCE 8
S SOURCE 9
S OUTPUT 0
S OUTPUT 1
S OUTPUT 2
S OUTPUT 3
S OUTPUT 4
S OUTPUT 5
S OUTPUT 6
S OUTPUT 7
S OUTPUT 8
S OUTPUT 9
S OUTPUT 10
S OUTPUT 11
S OUTPUT 12
S OUTPUT 13
S OUTPUT 14
S OUTPUT 15
S OUTPUT 16
S OUTPUT 17
S OUTPUT 18
atlona.com
Feedback
>POWER OFF
>POWER ON
>SOURCE CV
> SOURCE SV
> SOURCE COMP
> SOURCE PC1
> SOURCE PC2
> SOURCE PC3
> SOURCE HDMI1
> SOURCE HDMI2
> SOURCE HDMI3
> SOURCE HDMI4
> OUTPUT NATIVE
> OUTPUT VGA
> OUTPUT SVGA
> OUTPUT XGA
> OUTPUT SXGA
> OUTPUT UXGA
> OUTPUT 480i
> OUTPUT 480p
> OUTPUT 720p
> OUTPUT 1080i
> OUTPUT 1080p
> OUTPUT 576i
> OUTPUT 576p
> OUTPUT 720p
> OUTPUT 1080i50
> OUTPUT 1080p50
> OUTPUT WXGA
> OUTPUT WSXGA
> OUTPUT WUXGA
Description
Power on
Power off
Set the input to CV
Set the input to SV
Set the input to COMP
Set the input to PC1
Set the input to PC2
Set the input to PC3
Set the input to HDMI1
Set the input to HDMI2
Set the input to HDMI3
Set the input to HDMI4
Set the output EDID to native
Set the output EDID to VGA(640X480@60)
Set the output EDID to SVGA(800X600@60)
Set the output EDID to XGA(1024X768@60)
Set the output EDID to SXGA(1280X1024@60)
Set the output EDID to UXGA(1600X1200@60)
Set the output EDID to 480i
Set the output EDID to 480p
Set the output EDID to 720p@60
Set the output EDID to 1080i@60
Set the output EDID to 1080p@60
Set the output EDID to 576i@60
Set the output EDID to 576p@60
Set the output EDID to 720p@50
Set the output EDID to 1080i@50
Set the output EDID to 1080p@50
Set the output EDID to WXGA (1280x800@60)
Set the output EDID to WSXGA (1680x1050@60)
Set the output EDID to WUXGA (1920X1200@60)
8
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command
S OUTPUT 19
S OUTPUT 20
S SIZE 0
S SIZE 1
S SIZE 2
S SIZE 3
S SIZE 4
S PICTUREMODE 0
Description
Set the output EDID to WXGA+(1440X900@60)
Set the output EDID to SXGA+ (1400X1050@60)
Scale to Full Screen output
Scale to Overscan Screen output
Scale to Underscan Screen output
Scale to Letterbox Screen output
Scale to Panscan Screen output
Set picture mode to STANDARD
S PICTUREMODE 1
S PICTUREMODE 2
S PICTUREMODE 3
S CONTRAST 0~100
S BRIGHTNESS 0~100
S HUE 0~100
S SATURATION 0~100
S SHARPNESS 0~100
S NR 0
S NR 1
S NR 2
S NR 3
S PCPHASE 0~63
S PCCLOCK 0~100
S PCHPOSITION 0~100
S PCVPOSITION 0~100
S COLORTEMP 0
S COLORTEMP 1
S COLORTEMP 2
Feedback
> OUTPUT WXGA+
> OUTPUT SXGA+
> SIZE FULL
> SIZE OVERSCAN
> SIZE UNDERSCAN
> SIZE LETTERBOX
> SIZE PANSCAN
> PICTUREMODE STANDARD
> PICTUREMODE MOVIE
> PICTUREMODE VIVID
> PICTUREMODE USER
> CONTRAST 0~100
> BRIGHTNESS 0~100
> HUE 0~100
> SATURATION 0~100
> SHARPNESS 0~100
>NR OFF
>NR LOW
>NR MIDDLE
>NR HIGH
> PCPHASE 0~63
> PCCLOCK 0~100
> PCHPOSITION 0~100
> PCVPOSITION 0~100
>COLORTEMP NORMAL
>COLORTEMP WARM
>COLORTEMP COOL
S COLORTEMP 3
S RED 0~100
S GREEN 0~100
>COLORTEMP USER
> RED 0~100
> GREEN 0~100
Set Color Temperature to USER
Adjust the RED hue between 0 and 100
Adjust the GREEN hue between 0 and 100
S BLUE 0~100
S OSDHPOSITION
0~100
S OSDVPOSITION
0~100
S OSDTIMEOUT 0~100
S OSDBACKGROUND
0~8
S AAUD 0
S AAUD X
> BLUE 0~100
> OSDHPOSITION 0~100
Adjust the BLUE hue between 0 and 100
Adjust the OSD Horizontal Position between 0 and 100
> OSDVPOSITION 0~100
Adjust the OSD Vertical Position between 0 and 100
atlona.com
Set picture mode to MOVIE
Set picture mode to VIVID
Set picture mode to USER
Adjust Contrast between 0 and 100
Adjust Brightness between 0 and 100
Adjust Hue between 0 and 100
Adjust Saturation between 0 and 100
Adjust Sharpness between 0 and 100
Set NR Mode to OFF
Set NR Mode to LOW
Set NR Mode to MIDDLE
Set NR Mode to HIGH
Adjust the PC Phase between 0 and 63
Adjust the PC Clock between 0 and 100
Adjust the Horizontal Position between 0 and 100
Adjust the Vertical Position between 0 and 100
Set Color Temperature to NORMAL
Set Color Temperature to WARM
Set Color Temperature to COOL
> OSDTIMEOUT 0~100
Adjust the OSD Timeout between 0 and 100
> OSDBACKGROUND 0~8 Adjust the OSD Background between 0 and 8
> AAUD 0
> AAUD 1 ~ 41
Mute audio
Adjust volume level, replace X with 1 through 41
9
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command
S AUDIODELAY 0
S AUDIODELAY 1
S AUDIODELAY 2
S AUDIODELAY 3
Feedback
> AUDIODELAY OFF
Description
Turn Audio Delay off
> AUDIODELAY 40ms
Set Audio Delay to 40mSec
> AUDIODELAY 110ms Set Audio Delay to110mSec
> AUDIODELAY 150ms Set Audio Delay to 150mSec
Status Commands
Command
R POWER
R SOURCE
R OUTPUT
R SIZE
R PICTUREMODE
R CONTRAST
R BRIGHTNESS
R HUE
R SATURATION
R SHARPNESS
R NR
R PCHPOSITION
R PCVPOSITION
R PCCLOCK
R PCPHASE
R COLORTEMP
R RED
R GREEN
R BLUE
R OSDHPOSITION
R OSDVPOSITION
R OSDTIMEOUT
R OSDBACKGROUND
R AUDIOMUTE
R AUDIODELAY
atlona.com
Feedback
>POWER OFF~ON
Description
Displays POWER status
>SOURCE CV~HDMI4
Displays SOURCE status
>OUTPUT NATIVE~SXGA+
Displays OUTPUT status
>SIZE FULL~PANSCAN
Displays SIZE status
> PICTUREMODE STANDARD~USER Displays PICTUREMODE status
> CONTRAST 0~100
Displays CONTRAST value
> BRIGHTNESS 0~100
Displays BRIGHTNESS value
> HUE 0~100
Displays HUE value
> SATURATION 0~100
Displays SATURATION value
> SHARPNESS 0~100
Displays SHARPNESS value
> NR OFF~HIGH
Displays NR status
> PCHPOSITION 0~100
Displays PC H-POSITION value
> PCVPOSITION 0~100
Displays PC V-POSITION value
> PCCLOCK 0~100
Displays PC CLOCK value
> PCPHASE 0~63
Displays PC PHASE value
> COLORTEMP NORMAL~USER
Displays COLOR TEMP mode
> RED 0~100
Displays COLOR RED value
> GREEN 0~100
Displays COLOR GREEN value
> BLUE 0~100
Displays COLOR BLUE value
> OSDHPOSITION 0~100
Displays OSD H-POSITION value
> OSDVPOSITION 0~100
Displays OSD V-POSITION value
> OSDTIMEOUT 0~100
Displays OSD TIMEOUT value
> OSDBACKGROUND 0~8
Displays OSD BACKGROUND status
> AUDIOMUTE OFF~ON
Displays AUDIO MUTE status
> AUDIODELAY OFF~150ms
Displays AUDIO DELAY status
10
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Key Commands
Command
K POWER
K CV
K SV
K COMP
K PC1
K PC2
K PC3
K HDMI1
K HDMI2
K HDMI3
K HDMI4
K MENU
K DEC
K INC
K ENTER
K SOURCE
K VGA
K SVGA
K XGA
K SXGA
K UXGA
K 1080i60
K 480p
K 720P60
K 1080P60
K UP
K DOWN
K LEFT
K RIGHT
K EXIT
K AUTO
K RESET
atlona.com
Feedback
>POWER
Description
Panel/remote control key POWER
> CV
Panel key CV
> SV
Panel key SV
> COMP
Panel key COMP
> PC1
Panel key PC1
> PC2
Panel key PC2
> PC3
Panel key PC3
> HDMI1
Panel key HDMI1
> HDMI2
Panel key HDMI2
> HDMI3
Panel key HDMI3
> HDMI4
Panel key HDMI4
> MENU
Panel key MENU
> DEC
Panel key DEC
> INC
Panel key INC
> ENTER
Panel key ENTER
> SOURCE
Remote control key SOURCE
> VGA
Remote control key VGA
> SVGA
Remote control key SVGA
> XGA
Remote control key XGA
> SXGA
Remote control key SXGA
> UXGA
Remote control key UXGA
> 1080i60
Remote control key 1080i60
> 480p
Remote control key 480p
> 720p60
Remote control key 720p
> 1080p60
Remote control key 1080p60
> UP
Remote control key UP
> DOWN
Remote control key DOWN
> LEFT
Remote control key LEFT
> RIGHT
Remote control key RIGHT
> EXIT
Remote control key EXIT
> AUTO
Remote control key AUTO
> RESET
Remote control key RESET
11
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Safety Information
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
Do not modify the wall plug. Doing so will
void the warranty and safety features.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment,
not expressly approved by the manufacturer, could void the user’s authority to operate this
equipment.
Operate this product using only the included external power supply. Use of other power
supplies could impair performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs,
unplug the device and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed
on or against them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements,
fish tanks, and swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or
aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some
substances may also mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards. It may
also cause damage to your AT-LINE-PRO4-GEN2. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized
Atlona reseller or contact Atlona directly.
atlona.com
12
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Warranty
Limited Warranty
Atlona Technologies warrants that (a) its products (AT-LINE-PRO4-GEN2) will perform
substantially in accordance with the accompanying written materials for a period of 3 years
from the date of receipt and (b) that the product will be free from defects in materials and
workmanship under normal use and service for a period of 3 years. In the event applicable
law imposes any implied warranties, the implied warranty period is limited to 3 years from
the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied
warranty, so the above limitation may not apply to customers that fall within those areas.
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy
shall be, at Atlona Technologies’ decision, either return of the price paid for the product,
repair, or replacement of the product that does not meet this Limited Warranty and which is
returned to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty
is void if failure of the product has resulted from accident, abuse, misapplication, or natural
occurrence. In example but not limited to: power surges (electrical storms, local power
outage), dropping the product (or items on the product), contact with fluids, and physical
misconduct (i.e. kicking or punching). Any replacement product will be warranted for the
remainder of the original warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its
suppliers disclaim all other warranties, either expressed or implied, including, but not limited
to, implied warranties of merchantability and fitness for a particular purpose, with regard to
the product and any related written materials. This Limited Warranty gives customer specific
legal rights. Customers may have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona
Technologies or its suppliers be liable for any damages arising out of the use of or inability
to use this product, even if Atlona Technologies has been advised of the possibility of such
damages. Such damages include but are not limited to: special, incidental, consequential,
or indirect damages for personal injury, loss of business profits, business interruption, loss
of business information, or any other pecuniary loss. Atlona Technologies’ and its suppliers’
entire liability under any provision of this agreement shall be limited to the amount actually
paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation of
liability for consequential or incidental damage. The above limitations may not apply to you in
such jurisdictional cases.
atlona.com
13
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Atlona Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an
extra few moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure
you’ll receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration
information is completely secure. Atlona product registration is completely voluntary and failure
to register will not diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
atlona.com
14
Toll free: 1-877-536-3976
Local: 1-408-962-0515