Audiovox D1708 Portable DVD Player User Manual

D1708
PORTABLE 7" LCD MONITOR AND DVD PLAYER
128-6895
A. Introduction
Thank you for choosing the 7” portable DVD player. The main features include a 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal
Display (LCD) monitor and a DVD player. The unit applies the latest
state of the art electronics and is designed for use in hotels, offices
or your home. The unit is constructed to provide years of reliable,
trouble-free service, and is compact so that you can take it with you
anywhere and is designed for quick and easy installation. Please
read the entire instruction manual supplied with this product prior to
using. The documentation will assist you in installing the system properly to obtain the best equipment performance. Please save this
manual for later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
from strong magnets, heat sources, direct sunlight, excessive dust.
If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit. When you move it from a cold
to a warm location, wait for about one hour before operating the
unit, or remove the disc and leave the unit turned on until the moisture evaporates.
2. Installation
Ensure that the 7” portable DVD player is installed in accordance
with the instructions and illustrations provided in this manual.
3. Caution
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other material.
Keep the unit away from an open flame such as,.fire, candle etc,. It
2
is hazardous to replace the battery incorrectly. Replace the battery
only with the same or equivalent type, in order to protect the
enviromnent,please dispose the battery properly. Do not use the
unit in temperatures higher than 140 degrees Fahrenheit or 40 degrees Celcius.
4.Disassemble
Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system needs repair.
5. Cleaning Unit
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a
cloth lightly dampened with water for cleaning the exterior of the
system only.
6. Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources . Do not touch the surface of disc. Handle the
disc by its edge. Clean the disc by wiping the disc from the center
out with a cleaning cloth. Remove the disc from the unit and store
it in its case after playing. Some playback operations of discs may
be intentionally fixed by software producers. Since this unit plays
discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to
the instructions supplied with the discs.
3
C. Contents
1. 1 x 7’’ LCD Monitor & DVD Player Combo
2. 1 x AC to DC Adapter
3. 1 x Remote Control with battery (CR2025)
4. 1 x Instruction Manual
5. 1 x Audio/Video Cable
6. 1 x Cigarette Lighter Adapter
7. Rechargeable Battery
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC 9V jack on the
left side of the main unit, then plug the other end into the 120V AC
power outlet.
2. Powering the system in a car (refer to Figure 1)
Plug one end of the cigarette lighter adapter into the DC 9V jack on
the unit, then plug the other end into the cigarette lighter socket.
Figure 1
E. Controls, Indicators, and Connectors
4
1. Unit View (Refer to Figure 2)
Figure 2
1) MENU
2) Up Button
3) Left Button
4) Down Button
5) OK Button
6) Right Button
7) Open Button
8) Previous Button
9) Stop Button
10) Next Button
11) Play Button
12) Pause
13) Screen Mode Button
14) LCD Panel Shut Off Switch
15) Remote Control Sensor
16) Power LED
17) Video output Jack
18) Audio output Jack
19) Video Input Jack
20) Audio Input Jack
21) Power On/Off Switch
22) Volume Up/Down Control
23) Headphone Jack 1
24) Headphone Jack 2
25) DC 9V Input Jack
26) Brightness Up/Down Control
5
2. Remote Control View (Refer to Figure 3)
1) Display Button
2) Angle Button
3) Subtitle Button
4) Audio Button
5) Zoom Button
6) UP/DOWN/LEFT/RIGHT/
ENTER Buttons
7) Return Button
8) A-B Button
9) Forward Button
10) Reverse Button
11) Slow Button
12) Stop Button
13) Numeric Keypad
14) Setup Button
15) Menu Button
16) Repeat Button
17) SKIP18) SKIP+
19) Play Button
Figure 3
20) Pause Button
F. Loading and Playing a Disc
a. After connecting power to the unit, power on“DVD player” with the
power switch. The power indicator will light.
b. Open the disc tray by pressing OPEN , and place a disc into the
tray with the label side facing up.
c. Close the tray by pressing the “PRESS” button.The unit will load
the disc and start playing.
d. Rotate BRIGHTNESS and VOLUME to adjust the LCD’s brightness and the DVD player’s volume.
e. To stop playing a disc, press STOP.
6
G. SETUP
Press ‘SETUP’ to display the Main screen of the SETUP Menu on the
screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit
will resume it’s last playback mode.
Figure 4. Main SETUP Menu Screen
1) Press “Setup”, the ‘GENERAL SETUP PAGE’ will display on screen.
Figure 5. General SETUP Menu Screen
a).Select TV DISPLAY using the UP/DOWN buttons, and then press
RIGHT to enter the submenu. Select the TV display mode on
the screen using UP/DOWN, and press ENTER to confirm the
setting. Press LEFT to return.
7
* NORMAL/PS: When the player is connected to a normal TV,
and a wide picture is shown on the full screen.
* NORMAL/LB: When the player is connected to a normal TV,
and a wide picture is shown on the screen with a black strip
at both the top and bottom of the screen.
* WIDE: When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.
Figure 6. TV DISPLAY Screen Display
b).Select ‘ANGLE MARK’ using the UP/DOWN butttons, and then
press the RIGHT button to enter the submenu. Choose Angle
Mark on or off using the UP/DOWN buttons and then press ENTER to confirm the setting. Press the LEFT button to return.
Figure 7. ANGLE MARK Screen Display
* ON: The screen will show the angle mark icon. (*If an angle
option is available).
OFF: The screen will not display the Angle Mark
NOTE: Not all discs contain above features. The above features
are disc dependent.
8
c). Select ‘SCREEN SAVER’ using the UP/DOWN buttons,
Figure 8. SCREEN SAVER Display
*ON: enables screen saver
*OFF: disables screen saver (off)
*NOTE: The DVD player will enter the Screen Saver mode after
approximately five minutes if the same image remains on the
screen.
d). Select “ Last Memory” by UP/DOWN button
Figure 9. LAST MEMORY Screen Display
*on: The unit will return to the last position on the disc.
*off: The unit will not return to the last position on the disc.
2) With no disc inside the player select “Video quality Setup”by using
the LEFT/RIGHT buttons, press “enter” to enter the video quality
set up page.
Figure 10. Main SETUP Menu VIDEO QUALITY
9
a).Select “Brightness by using the UP or DOWN buttons ,then press
“Enter”you can change the Brightness by pressing the LEFT or
RIGHT buttons. To exit “Brightness Setting”, press “Enter”again
to return the main Menu.
Figure 11. BRIGHTNESS Screen Display
b).Select “Contrast” by using the UP or DOWN buttons,then press
“Enter” you can adjust the Contrast by pressing the LEFT or
RIGHT butttons.
Figure 12. CONTAST Screen Display
To exit “Contrast” Setting, press “Enter”again to return to the main
Menu.
c).Select “Hue” by using the UP or DOWN buttons, then press
“Enter” you can adjust the Hue by pressing the LEFT or RIGHT
buttons.
Figure 13. HUE Screen Display
To exit “Hue”Setting,press “Enter”again to return the main Menu.
10
d).Select “Saturation “ by using the UP or DOWN buttons, then
press “Enter” you can adjust the Saturation by pressing the LEFT
or RIGHT buttons.
Figure 14. SATURATION Screen Display
To exit “Saturation”Setting,press “Enter”again to return to the main
Menu
3).With no disc inside the player ,select “password” using the LEFT
or RIGHT buttons, then press the RIGHT button to enter the
submenu .
Figure 15. PASSWORD CHANGE Menu
Press ‘ENTER’ to enter the Password Change Page. Input the Old
Password or the Default Password, the New Password, and the
Confirmed New Password. Press ‘ENTER’ to confirm the change.
Figure 16. PASSWORD CHANGE MENU
11
NOTE: The default password is 3308.
Figure 17. PASSWORD VERIFY Input Screen Display
4).With no disc inside the player select ‘PREFERENCES’ using the LEFT or
RIGHT buttons, then press ‘ENTER’ to enter the preferences page.
Figure 18. Preference Audio Language
a. Select ‘AUDIO’ using the UP/DOWN buttons, then press
‘RIGHT’ to enter the submenu. Select the audio language you
desire using the UP or DOWNbuttons, then press ‘ENTER’ to
confirm the setting. Press LEFT to return.
b. Select ‘SUBTITLE’ the using the UP or DOWN buttons, then
press RIGHT to enter the submenu. Select the desired subtitle
language or SUBTITLE OFF using the UP or DOWN buttons ,
then press ‘ENTER’ to confirm the setting. Press ‘LEFT’ to return.
Figure 19. Preference SUBTITILE LANGUAGE
12
c. Select ‘DISC MENU’ using the UP or DOWN buttons, then press
‘RIGHT’ to enter the submenu. Select the Disc Menu Language
you desire using the UP or DOWN buttons , then press ‘ENTER’
to confirm the setting. Press ‘LEFT’ to return.
Figure 20. Preference DISC MENU LANGUAGE
Note: Language and subtitle selection is only available for discs
that are recorded in the above listed languages. If the selected,
language is not available, the player will play and display on the
screen the original recorded language contained in the disc.
d. Select ‘PARENTAL’ using the UP or DOWN buttons , then press
RIGHT to enter the submenu.
Figure 21. PARENTAL Preference Screen Display
Select the parental level you desire using the UP or DOWN buttons for discs with lock-out function or multiple rating levels. These
are listed from the lowest level (1 Kid Safe) to the highest level
(Adult). Enter a 4 digit password, then press ‘ENTER’ to confirm
the parental level setting.
NOTE: The level of 8 Adult is the factory default.
13
e. Select ‘DEFAULTS’ using the UP or DOWN buttons, then press
RIGHT to enter the submenu. Press ENTER to make the setting
return to the factory-set mode.
NOTE: The parental setting is not affected by the default reset
function.
Figure 22. Loading Factory Setting
NOTE: The Default Password is 3308. This password is
always effective even after you have selected your own
password and changed it. To avoid the possibility of others
using the default password to set the parental level and change
the password, you can record this default password in another
area and delete it from this manual. Some discs can be limited
depending on the age of users while some discs cannot.
14
1. Basic Operation
POWER
OPEN
PLAY
SLOW
PAUSE
STOP
NEXT
PREVIOUS
FORWARD
REVERSE
LEFT/RIGHT/UP/DOWN
ENTER
NUMBERS
RETURN
MENU
REPEAT
A-B
DISPLAY
ANGLE
SUBTITLE
AUDIO
ZOOM
SETUP
Turn the unit on/off
Remove/load the disc
Start Play/Execute item or setting
Play at 1/2, 1/4, 1/8 or 1/16 times speed
Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene during play back
Go back to the previous chapter, track or
scene during play back
Scan forward at 2, 4, 8,16 or 32x times
speed
Scan backward at 2, 4, 8, 16 or 32x times
speed
Used for Menu Navigation
Execute item or confirm setting
Select item or setting
Return
Display the main menu of the disc
Repeat playing title, chapter, or track
Repeat a specific portion from point A to point
B of the disc
Display information (title, chapter, track,
time, etc.).
Change the viewing angles on the scene
Select the subtitle language and turn it on/
off
Select the audio language
Enlarge an image to 2, 3, or 4 times the
original size.
Display the setup menu to select and set
items, and exit the setup menu.
15
2. MENU
A DVD is divided into sections called titles and chapters. When you
play a DVD, a root menu of the disc will appear on the screen of your
TV or Monitor. The contents of the menu vary from disc to disc. Press
MENU during playback to display the menu. Some DVDs only allow
you to select disc playback options using the DVD root menu.
3. DISPLAY (Display contents vary from disc to disc.)
1. PLAYING TIME AND REMAINING TIME
a. During playback press the ‘DISPLAY’ button to display the current Title Number (1), the total Number of Titles (2), the current
Chapter Number (3), the total Number of Chapters (4), and the
Playing elapsed Time for the title (5). The heading will disappear
automatically after 3 seconds if no buttons are pressed.
Figure 19. Title, Chapter Number, and Time Screen Display
b. Press ‘DISPLAY’ again to display the Remaining Time of the title.
The heading will disappear automatically in 3 seconds.
Figure 20. Title Remaining Time Screen Display
16
c. Press ‘DISPLAY’ a 3rd time to display the Elapsed Time for the
chapter. The heading will disappear automatically in 3 seconds.
Figure 21. Chapter Elapsed Time Screen Display
d. Press ‘DISPLAY’ a 4th time to display the Remaining Time for the
chapter. The heading will disappear automatically in 3 seconds.
Figure 22. Chapter Remaining Time Screen Display
e. Press ‘DISPLAY’ a 5th time to exit, ‘DISPLAY OFF’ will be displayed and will disappear automatically in 3 seconds.
2. ANGLE
During playback of a disc, press ‘ANGLE’ to display the available
angles for discs containing multi-angles*, with the current angle
number (1) and the total number of angles (2) displaying. Press
‘ANGLE’ to select another angle, then press again to exit and return to the normal viewing angle. The angle display will disappear
automatically if the ‘ANGLE’ button is not pressed again within 3
seconds.
*NOTE: Not all discs contain this feature.
17
Figure 23. Angle Screen Display
3. SUBTITLE
During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number (1)
and the total Number of Subtitle Languages (2) displayed. If there
are multiple languages press ‘SUBTITLE’ again to select another
subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’
button until ‘SUBTITLE OFF’ is displayed. The Subtitle display will
disappear automatically if the ‘SUBTITLE’ button is not pressed
again within 3 seconds.
Figure 24. Subtitle Screen Display
* Some DVDs only allow access to this function through the DVD
menu.
18
4. AUDIO
During playback press ‘AUDIO’ to select the audio language you
desire*, with the current Audio Channel Number (1) and the total
number of Audio Channels (2) displayed. Press AUDIO again to
select another audio language. The audio display will disappear
automatically if the ‘AUDIO’ button is not pressed within for 3
seconds.
Figure 25. Audio Language Screen Display
* Some DVDs only allow access to this function through the DVD
menu.
5. ZOOM
During playback press ‘ZOOM’ to enlarge the picture by 2x, 3x or 4X
with the current zoom multiple.(1)Press “zoom”one time ,the picture will be enlarged 2X.(2)Press “zoom a ”second time ,the picture
will be enlarged 3X.(3)Press “zoom a ”3rd time ,the picture will be
enlarged 4X.(4)Press “zoom”4th time ,the picture will return to normal size.
Figure 26. ZOOM Screen Display
19
6. A-B REPEAT
a. During playback press first time ‘A-B’ to set the Starting
Point A.
Figure 27. A-B Repeat Starting Point Screen Display
b.Press ‘A-B’second time to set the Ending Point B and the
player will repeatedly play the part between Point A and Point
B.
Figure 28. A-B Repeat Ending Point Screen Display
c. Press A-B a third time to cancel A-B repeat and resume
playback.
Figure 29. A-B Repeat Cancelled Screen Display
20
7. REPEAT
a. During playback press ‘REPEAT’ once to repeatedly play the current chapter.
Figure 30. Chapter Repeat ON Screen Display
b.During playback press ‘REPEAT’ again to repeatedly play the
current title.
Figure 31. Title Repeat ON Screen Display
c. During playback press ‘REPEAT’ a 3rd time to repeat all Chapters
and Titles.
Figure 32. Title Repeat ON Screen Display
21
d. Press “REPEAT” a 4th time, to resume normal play.
Figure 33. Repeat Off ON Screen Display
4. PLAYING AUDIO CDS
When playing an audio CD press the DISPLAY button on the remote
to view time information. The options below show you what information
is available using this function.
a. The current track and playing time of that track will be displayed on
the screen.
Figure 34. SINGLE ELAPSED Screen Display
b. Press ‘DISPLAY’ one time and SINGLE REMAIN appears along
with the current track playing and the amount of time left.
Figure 35. SINGLE REMAIN Screen Display
22
c. Press ‘DISPLAY’ two times and TOTAL ELAPSED appears along
with the current track playing and the total time that the CD has been
playing.
Figure 36. TOTAL ELAPSED Screen Display
d. Press ‘DISPLAY’ three times and TOTAL REMAIN appears along
with the current track playing and the amount of time remaining on
the CD.
Figure 37. TOTAL REMAIN Screen Display
e. Press ‘DISPLAY’ four times and “ DISPLAY OFF” will appear
momentarily then disappear. The CD time Information will not be
displayed.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• TRACK- repeats the track that is playing.
• ALL- repeats the disc that is playing.
• OFF
As you toggle through the options, the repeat option changes. The
selected repeat option loops repeatedly until you turn it off.
23
5. PLAYING MP3 DISCS
MP3 is a format for storing digital audio. An audio CD-quality song is
compressed into the MP3 format with very little loss of audio quality
while taking up much less disc space. CD-R /RW discs that have
been encoded in MP3 format are compatible with this system.
Playback modes:
FOLDER (normal playback)
SINGLE
REPEAT ONE (repeat playback of a song)
REPEAT FOLDER (repeat playback of a specific folder)
Insert an MP3 CD, the DVD player will initialize the disc and the directory
(folder) will be shown on the TV screen.
Figure 38. MENU Screen Display
When an MP3 disc is inserted into the unit, the menu screen appears
automatically. You can use the menu screen to change folders and
songs. The system plays the songs in the order they were burned
onto the disc.
or button to choose a folder from the folder list
1. Press the
on the left side of the screen.
2. Press ENTER to select the highlighted folder. The songs available under the folder will be listed.
or button to choose a song from
3. Press STOP First, use
the list. Press ENTER to select and begin playback of the highlighted song.
24
Use the
( NEXT ) button to move to the next song. Press the
(PREVIOUS) button to move to the beginning of the previous song.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• SINGLE
• REPEAT ONE
• REPEAT FOLDER
• FOLDER
Pressing REPEAT the 5TH time will resume normal playback. As you
toggle through the options, the repeat option changes. The selected
repeat option loops repeatedly until you turn it off.
NOTICE
“
“ icon in front of a file name indicates that this is a folder, not an
MP3 file.
“MP3” icon in front of a file name indicates that this is a MP3 file.
25
6. Playing JPG file
1) Load the JPG Disc into tray.
2) Select JPG file by pressing “UP/DOWN” button.
3) You can preview the JPG file by pressing “Play” or “ENTER”.
4) Pressing the “Left Key“ will rotate the picture90 degrees
counterclocckwise. Pressing the “Right Key“ will rotate the
picture clockwise.
5) When browsing the photos, you can reverse the photo horizontally
by pressing “Up” key,or you can reverse the photos vertically by
pressing “Down” key.
6) When you browse the JPG file, press “display”, there will be different
refresh mode below.
a. Press “display” first time, “WIPE TOP” display on the screen, the
picture will refresh from top to bottom.
b. Press “display” 2nd time, “WIPE BOTTOM” will display on the
screen, the picture will refresh from bottom to top.
c. Press “display” 3rd time, “WIPE LEFT” will display on the screen,
the picture will refresh from left side to right side.
d. Press “display” 4th time, “WIPE RIGHT” will display on the screen,
the picture will refresh from right side to left side.
e. Press “display” 5th time, “DIAGONAL WIPE LEFT TOP” will display on the screen, the picture will refresh from left top to right
bottom.
f. Press “ display ” 6th time, “DIAGONAL WIPE RIGHT TOP” will
display on the screen, the picture will refresh from right top to left
bottom.
g. Press “display” 7th time, “DIAGONAL WIPE LEFT BOTTOM” will
display on the screen, the picture will refresh from left bottom to
right top.
h. Press “display ” 8th time, “DIAGONAL WIPE RIGHT BOTTOM”
will display on the screen, the picture will refresh from right bottom to left top.
i. Press “display” 9th time, “EXTEND FROM CENTER H” will display on the screen, the picture will refresh from horizontal center
to both sides.
j. Press “display” 10th time, “EXTEND FROM CENTER V” will
display on the screen, the picture will refresh from vertical center to both sides.
26
k. Press “display” 11th time, “COMPRESS TO CENTER H” will
display on the screen, the picture will refresh from top and bottom to center.
l. Press “display” 12th time, “COMPRESS TO CENTER V” will
display on the screen, the picture will refresh from right and left
to center.
m.Press “display” 13th time, “WINDOW H” will display on the
screen, the picture will refresh from four window’s top side to
bottom side.
n. Press “display” 14th time, “WINDOW V” will display on the screen,
the picture will refresh from four window’s left side to right side.
o. Press “display” 15th time, “WIPE FROM EDGE TO CENTER”
will display on the screen, the picture will refresh from 4 edges to
center.
7) When previewing the file, pressing “ANGLE, SUBTITLE, AUDIO,
NUMBER, AB, RETURN, REW/FF, SLOW” a hand icon will appear
on the display meaning that these options are not available.
8) Press “Stop” to browse the JPG file, “SLIDE SHOW” “MENU” will
display on the screen.
9) When browsing the picture, press “Stop” and thumbnail size picture
will be diplayed. You can select the picture you desire by using the
UP/DOWN/LEFT/RIGHT/ENTER key.
10) Press “Play” or “OK”, to preview the left top picture.
11) You can return the root Menu by pressing “left” key.
27
7. Connecting to a TV or another monitor ( Refer to Figure 39)
You can also connect the DVD player to a TV to enjoy high quality
stereo sound and picture on another monitor.
1. Connect one end of the audio/video cable’s black (1/8” stereo
plug) plug into the unit’s DVD AUDIO OUT jack, and connect the
other end to the AUDIO INPUT jacks on your TV or Monitor (white =
left channel, red = right channel).
2. Connect the audio/video cable’s yellow plug into the DVD VIDEO
OUT jack on the back of the unit, and the other yellow plug to the
VIDEO INPUT jack on your TV or Monitor.
Figure 39
28
9. Specifications
Supported Media formats: DVD/CD/MP3
Color system: NTSC
Screen size: 7’’
DVD video format: Horizontal 720 pixel, vertical 480 pixel (NTSC)
Frequency response: DVD (PCM 96 kHz/24 bits ): 20 Hz to 44 Hz
DVD (PCM 48 kHz): 20 Hz to 22 kHz
CD: 20 Hz to 20 kHz
Video output: 1.0 Vp-p/75 Ohm, unbalanced
Video S/N: Better than 35 dB
Audio output: 2 x 0.4 W
Audio S/N: Better than 35 dB
Power source: DC 9V
Power consumption: 12 W
Operating temperature: 5~40°C (41~104°F)
Storage temperature: -20~60°C (4~140°F)
Operating humidity: 10~75%
Dimensions (W x H x D):7.87 X 5.92 X1.44inches
200 x 150.5 x 36.5mm
Battery Type: Ni-Mh
10. Rechargeable Battery Installation and Use
The player utilizes a set of long-life Ni-Mh batteries for a portable
power supply. Ni-MH batteries feature high storage capacity and low
level of degradation. This means the Ni-MH batteries do not have
“Memory Effect” and thus can be recharged safely regardless of
whether the battery is fully or only partially discharged. Please fully
charge the battery prior to first use.
NOTE: When the DVD player is used with the battery as a power
source, ensure that the battery has been charged for at least eight
hours prior to connecting it to the DVD player.
If you plan not to use the battery for an extended period of time (one
week or longer), we recommend that you first fully charge the battery
and store it away properly. For longer periods of storage, please
recharge the battery at least once every two months to maintain the
29
battery in optimum condition. Under no circumstances short the battery terminals, store the battery in a metal container, or leave the
battery in a humid or damp environment. Ideally, store the battery in
an airtight container with desiccant or other dehumidifying agent.
Each full recharge takes approximately five-hours and one full charge
can provide power to the player for approximately 3 hours.
During recharge, the red indicator will stay on. Once fully recharged,
the red light will turn off. At this point you may remove the wall plug
and stop charging.
Precautions related to Battery Recharge:
1. Once the battery is fully discharged, immediately recharge (regardless of whether you plan to use battery or not) in order to maximize battery life.
2. To charge the battery, please connect the power jack directly into
the DVD player and leave the POWER switch in the off position.
Using and Maintaining your Rechargeable Batteries
1.Please make sure you always use only the AC adapter included
with the player to recharge your batteries.
2.Recharge efficiency will degrade when environmental temperatures
drop below 50oF (10oC) or exceed 95oF (35oC).
3. Please remove battery from the player and store it properly if the
player is not to be used for long time. During this period , please
recharge the battery at least once two months to avoid irreparable
damage to the battery. If the battery attached to the player for a
long period, please also recharge the battery at least once two
weeks.
30
Installing the Battery Pack:
1. First, make sure the player is in “Stop” mode and that the AC power
supply has been disconnected.
2. Close the player cover.
3. Align the battery pack with the player module’s front edge.
4. Push the battery towards the rear of the player until it locks into
position. The lock position is indicated by a click. The unit will fit snugly
to the player.
5. Push the battery plug into the DVD player DC input jack.
Figure 40. Installing the DVD Player Battery
Removing the Battery Pack:
1. First, make sure the player is in “Stop” mode and the AC power
supply has been disconnected.
2. Press the release button on the rear of battery.
3. Slide the battery towards the back of the unit.
Figure 41. Removing the DVD Player Battery
31
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of
this product that should this product or any part thereof, under normal use and conditions,
be proven defective in material or workmanship within 90 days from the date of original
purchase, such defect(s) will be repaired or replaced with reconditioned product (at the
Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered
with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to
correction of antenna problems, to costs incurred for installation, removal or reinstallation of
the product, or to damage to tapes, discs, speakers, accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/
bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL
THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO
THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the
Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions may
not apply to you. This Warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.
HAUPPAUGE, NEW YORK 11788 ! 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
© 2003 Audiovox Electronics Corporation
128-5556C
128-6895