Audiovox D1915 Portable DVD Player User Manual

D1915
PORTABLE DVD PLAYER AND 9" LCD MONITOR
Contents
A. Introduction ............................................................................ 3
B. Cautions and Warnings ........................................................ 3
C. Contents ............................................................................... 5
D. Powering and Installation ..................................................... 5
E. Controls, Indicators and Connectors ................................... 6
F. Loading and Playing a Disc .................................................. 7
G. Basic Operation...................................................................... 8
H. Menu .................................................................... 9
I. Display................................................................................... 9
J. Playing Audio CDS................................................................ 12
K. Playing MP3 Discs .......................................................... 13
L. Playing JPG file ........................................................... 15
M. Connecting to Other Elevctronic Equipment........................ 17
N. Setup .................................................................................... 19
O. Specifications ...................................................................... 28
P. Rechargeable Battery Installation and Use ......................... 28
Q. Troubleshooting ................................................................. 31
2
A. Introduction
Thank you for choosing the D1915 portable DVD player. The main
features include a 9" Wide Screen (16:9 Aspect Ratio) Liquid Crystal
Display (LCD) monitor and a DVD player. The unit applies the latest
state of the art electronics and is designed for use in hotels, offices,
vehicles or your home. The unit is constructed to provide years of
reliable, trouble-free service, and is compact so that you can take it
with you anywhere and is designed for quick and easy installation.
Please read the entire instruction manual supplied with this product
prior to using. The documentation will assist you in installing the system properly to obtain the best equipment performance. Please save
this manual for later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
from strong magnets, heat sources, direct sunlight, excessive dust.
If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit. When you move it from a cold
to a warm location, wait for about one hour before operating the
unit, or remove the disc and leave the unit turned on until the moisture evaporates.
2. Installation
Ensure that the D1915 is installed in accordance with the instructions and illustrations provided in this manual.
3. Caution
Do not push objects of any kind into the unit through openings;
do not spill or spray liquid of any kind on or in the system (this
may result in a fire or electric shock). Do not place anything
heavy on the unit. To ensure proper ventilation and proper
3
operation, never cover or block the slots and openings with a cloth
or other material. Keep the unit away from an open flame such as
fire, candle etc. It is hazardous to replace the battery incorrectly.
Replace the battery only with the same or equivalent type, in order
to protect the environment, please dispose of the battery properly.
Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius.
4.Disassembly
Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system needs repair.
5. Cleaning
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the system
only.
6. Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources. Do not touch the surface of disc. Handle the
disc by its edge. Clean the disc by wiping the disc from the center
out with a cleaning cloth. Remove the disc from the unit and store
it in its case after playing. Some playback operations of discs may
be intentionally fixed by software producers. Since this unit plays
discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to
the instructions supplied with the discs.
4
7.Regional Coding
Both the DVD player and discs are coded by region. These
regional codes must match in order for the disc to play. If the
codes don’t match, the disc won’t play. This unit’s code is region
1. DVDs with other regional codes can not be played in this unit
C. Contents
1. 1 x 9’’ LCD Monitor & DVD Player Combo
2. 1 x Remote Control with battery (CR2025)
3. 1 x Audio/Video Adapter Cable
4. 1 x AC to DC Adapter
5. 1 x DC Power Adapter
6. 1 x Instruction Manual
7. 1 x Rechargeable Battery
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC input jack on the
left side of the main unit, then plug the other end into a 110~240V
AC power receptacle.
2. Powering the system in a car
Plug one end of the DC power adapter into the DC input jack on
the left side of the main unit, then plug the other end into the
vehicle power outlet.
Figure 1
5
E. Controls, Indicators, and Connectors
1. Unit View (Refer to Figure 2)
6
Figure 2
1)
2)
3)
4)
5)
6)
7)
8)
LCD Panel Shut Off Switch
Wide Button
Previous/Next/Pause/Stop
Play Button
Menu Button
Up/Down/Left/Right/OK
Button
Press to close
Headphone Jack 1
Headphone Jack 2
6
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
Volume Control
Brightness Control
Door Open Switch
Remote Control Sensor
Power LED
Power On/Off Switch
AV in/out SW
AV Jack
DC 9-12V Input Jack
Battery Release Button
2. Remote Control (Refer to figure 3)
1) Setup Button
2) Up Button
3) Previous Button
4) Enter Button
5) Reverse Scan/Left Button
6) DOWN Button
7) Numeric Button
8) Display Button
9) Zoom Button
10) Subtitle Button
11) Next Button
12) A-B Repeat Button
13) Forward Scan/Right Button
14) 1/All Repeat Button
15) Stop Button
16) Menu Button
17) Audio Button
18) Angle Button
19) Play/Pause Button
Figure 3
F. Loading and Playing a Disc
a. After connecting power to the unit, turn on the DVD player with the
power switch. The power indicator will light.
b. Open the disc tray by sliding the OPEN switch to the right. Place
a disc into the tray with the label side facing up.
c. Close the tray by pressing the area marked “PRESS”. The unit will
load the disc and start playing.
d. Adjust the BRIGHTNESS and VOLUME to the desired levels.
e. To stop playing a disc, press STOP.
7
G. Basic Operation
Turn the unit on/off
Remove/load the disc
Start Play/Confirm item or setting
Play at 1/2, 1/4, 1/8 or 1/16 normal speed
Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene durNEXT
ing play back
Go back to the previous chapter, track or
PREVIOUS
scene during play back
Scan forward at 2, 4, 8,16 or 32 times speed
FORWARD
Scan backward at 2, 4, 8, 16 or 32 times
REVERSE
speed
LEFT/RIGHT/UP/DOWN Used for Menu Navigation
Execute item or confirm setting
ENTER
Select item or setting
NUMBERS
Display the main menu of the disc
MENU
Repeat playing title, chapter, or track
REPEAT
Repeat a specific portion from point A to point
A-B
B of the disc
Display information (title, chapter, track,
DISPLAY
time, etc.).
Change the viewing angles
ANGLE
Select the subtitle language and turn it on/
SUBTITLE
off
Select the audio language
AUDIO
Enlarge an image to 2, 3, or 4 times the
ZOOM
original size.
Display the setup menu to select and set
SETUP
items, and exit the setup menu.
POWER
OPEN
PLAY
SLOW
PAUSE
STOP
8
H. Menu
A DVD is divided into sections called titles and chapters. When you
play a DVD, a root menu of the disc will appear on the screen of your
TV or Monitor. The contents of the menu vary from disc to disc. Press
MENU during playback to display the menu. Some DVDs only allow
you to select disc playback options using the DVD root menu.
I. Display
1. PLAYING TIME AND REMAINING TIME
a. During playback press the ‘DISPLAY’ button to display the current Title Number (1), the total Number of Titles (2), the current
Chapter Number (3), the total Number of Chapters (4), and the
Playing elapsed Time for the title (5). The heading will disappear
automatically after 3 seconds if DISPLAY button is not pressed.
Title, Chapter Number, and Time Screen Display
b. Press ‘DISPLAY’ repeatedly to choose from the options below :
Title Elapsed
Title Remain
Display Off
9
Chapter Elapsed
Chapter Remain
2. ANGLE
During playback of a disc, press ‘ANGLE’ to display the available angles
for discs containing multi-angles*, with the current angle number (1)
and the total number of angles (2) displaying. Press ‘ANGLE’ to select
another angle, then press again to exit and return to the normal viewing angle. The angle display will disappear automatically if the ‘ANGLE’
button is not pressed again within 3 seconds.
*NOTE: Not all discs contain this feature.
Subtitle
Angle
3. SUBTITLE
During disc playback press ‘SUBTITLE’ to select the subtitle language
you desire*, with the current Subtitle Language Number (1) and the
total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘Subtitle Off’ is displayed. The Subtitle display will disappear automatically
if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
* Some DVDs only allow access to this function through the DVD
menu
4. AUDIO
During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number
of Audio Channels (2) displayed. Press AUDIO again to select an
other audio language. The audio display will disappear automatically if
the ‘AUDIO’ button is not pressed within for 3 seconds.
* Some DVDs only allow access to this function through the DVD menu.
10
Zoom
Audio Language
5. ZOOM
During playback press ‘ZOOM’ to enlarge the picture by 2X, 3X or 4X.
(1) Press “zoom”one time, the picture will be enlarged 2X.
(2) Press “zoom” a second time, the picture will be enlarged 3X.
(3) Press “zoom” a 3rd time, the picture will be enlarged 4X.
(4) Press “zoom” a 4th time, the picture will return to normal size.
6. A-B REPEAT
a. During playback press a first time ‘A-B’ to set the Starting Point A.
b. Press ‘A-B’ a second time to set the Ending Point B and the
player will repeatedly play the part between Point A and Point B.
c. Press A-B a third time to cancel A-B repeat and resume
normal playback.
A-B Repeat Starting Point
A-B Repeat Ending Point
11
A-B Repeat Cancelled
7. REPEAT
a. During playback press ‘REPEAT’ to select see the repeat mode
desired.
Chapter Repeat
Single Elapsed Time When
Playing Audio CDs
J. Playing Audio CDs
When playing an audio CD press the DISPLAY button on the remote
to view time playback information. The options below appear on the
display:
Single Elapsed
Single Remain
Total Elapsed
Total Remain
Display Off
CD Display Mode
Single Elapsed: The current track playing and playing time of that
track will display on the screen.
Single Remain: The current track playing and the amount of time
left.
12
Total Elapsed:
Total Remain:
Display Off:
The current track playing and the total time that the
CD has been playing.
The current track playing and the amount of time
remaining on the CD.
The CD time Information will not be displayed.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• Track- repeats the track that is playing.
• All- repeats the disc that is playing.
• Off
As you toggle through the options, the repeat option changes. The selected
repeat option loops repeatedly until you turn it off.
K. Playing MP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song is
compressed into the MP3 format with very little loss of audio quality
while taking up much less disc space. CD-R /RW discs that have
been encoded in MP3 format are compatible with this system.
When a MP3 disc is inserted into the unit, the menu screen will appear
automatically. You can use the menu screen to select your desired
folders and songs.
1. Press the or button to choose a folder from the folder list on
the left side of the screen.
2. Press ENTER to select the highlighted folder. The songs available under the folder will be listed.
3. Use or button to choose a song from the list. Press ENTER
to select and begin playback of the highlighted song.
13
4. Use the
( NEXT ) button to move to the next song. Press the
(PREVIOUS) button to move to the beginning of the previous
song.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• Single
• Repeat One (repeat playback of a song)
• Repeat Folder (repeat playback of a specific folder)
• Repeat Off (normal playback)
As you toggle through the options, the repeat mode changes. The
selected repeat mode loops repeatedly until you turn it off.
NOTICE
“
” icon in front of a file name indicates that this is a folder, not an
MP3 file.
“MP3” icon in front of a file name indicates that this is a MP3 file.
14
L. Playing JPEG file
1) Load the JPEG Disc into tray.
2) Select JPEG file by pressing “UP/DOWN” button.
3) You can preview the JPEG file by pressing “Play” or “ENTER”.
4) Pressing the “Left Key“ will rotate the picture counterclockwise.
Pressing the “Right Key“ will rotate the picture clockwise.
5) When browsing the photos, you can reverse the photo horizontally
by pressing “Up” key,or you can reverse the photos vertically by
pressing “Down” key.
6) When you browse the JPEG file, pressing “display” will change the
refresh mode below.
a. Press “display” first time, “WIPE TOP” will display on the screen,
the picture will refresh from top to bottom.
b. Press “display” 2nd time, “WIPE BOTTOM” will display on the
screen, the picture will refresh from bottom to top.
c. Press “display ” 3rd time, “WIPE LEFT” will display on the screen,
the picture will refresh from left side to right side.
d. Press “display ” 4th time, “WIPE RIGHT” will display on the
screen, the picture will refresh from right side to left side.
e. Press “display” 5th time, “DIAGONAL WIPE LEFT TOP” will display on the screen, the picture will refresh from left top to right
bottom.
f. Press “ display ” 6th time, “DIAGONAL WIPE RIGHT TOP” will
display on the screen, the picture will refresh from right top to left
bottom.
g. Press “display ” 7th time, “DIAGONAL WIPE LEFT BOTTOM”
will display on the screen, the picture will refresh from left bottom
to right top.
h. Press “display ” 8th time, “DIAGONAL WIPE RIGHT BOTTOM”
will display on the screen, the picture will refresh from right bottom to left top.
15
i. Press “display” 9th time, “EXTEND FROM CENTER H” will display on the screen, the picture will refresh from horizontal center
to both sides.
j. Press “display” 10th time, “EXTEND FROM CENTER V” will
display on the screen, the picture will refresh from vertical center to both sides.
k. Press “display” 11th time, “COMPRESS TO CENTER H” will
display on the screen, the picture will refresh from top and bottom to center.
l. Press “display” 12th time, “COMPRESS TO CENTER V” will
display on the screen, the picture will refresh from right and left
to center.
m. Press “display” 13th time, “WINDOW H” will display on the screen,
the picture will refresh from four window’s top side to bottom
side.
n. Press “display” 14th time, “WINDOW V” will display on the screen,
the picture will refresh from four window’s left side to right side.
o. Press “display” 15th time, “WIPE FROM EDGE TO CENTER”
will display on the screen, the picture will refresh from 4 edges to
center.
7) When previewing the file, pressing “ANGLE, SUBTITLE, AUDIO,
NUMBER, AB, RETURN, REW/FF, SLOW” a hand icon will appear
on the display meaning that these options are not available.
8) Press “Stop” to browse the JPEG file, “SLIDE SHOW MENU” will
be displayed on the screen.
9) When browsing the picture, press “Stop” and thumbnail size
pictures will be diplayed. You can select the picture you desire by
using the UP/DOWN/LEFT/RIGHT/ENTER key.
10) Press “Play” or “OK”, to preview the picture.
16
M. Connecting to Other Electronic Equipment
1. Connecting to a TV or another monitor ( Refer to Figure 4)
a. Position the AV In/Out Switch to the “Out” Position.
b. Connect one end of the audio/video adapter cable’s black (1/8”
plug) plug into the unit’s DVD AV jack, and connect the other end to
a standard A/V Cable (purchased separately). Then connect the A/V
Cable to the INPUT jacks on your TV or Monitor.
(white = left channel, red = right channel, yellow=video).
Figure 4
2. Connecting to a Game or Camcorder (Refer to Figure 4)
a. Position the AV In/Out Switch to “In” Position.
b. Connect one end of the audio/video adapter cable’s black (1/8”
plug) plug into the unit’s DVD AV jack, and connect the other end to
the A/V output jacks on your Camcorder or Game.
(white = left channel, red = right channel, yellow=video).
17
3. Headphone
Optional wired headphones may be used with the unit. Simply plug in
the headset to either Headphone 1 jack or Headphone 2 jack on the
right side of the DVD.( Refer to Figure 5)
2
1
Figure 5
Plugging into Headphone jack 1 disables the internal speakers.
Notice:
1.This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
2. Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098
and 4,907,093 licensed for limited viewing uses only.
18
N. Setup
Press ‘SETUP’ to display the Main screen of the Setup Menu on the
screen. Press ‘SETUP’ again to exit the Setup Menu and the unit will
resume it’s last playback mode.
Main Setup Menu Screen
1) Press “SETUP”, the ‘General Setup Page’ will be displayed.
a).Select ‘TV Display’ using the UP/DOWN button, and then press
RIGHT to enter the submenu. Select the TV display mode desired using UP/DOWN, and press ENTER to confirm the setting. Press LEFT to return.
* Normal/PS: When the player is connected to a normal TV, and
a wide picture is shown on the full screen.
* Normal/LB: When the player is connected to a normal TV, and
a wide picture is shown on the screen with a black strip at both
the top and bottom of the screen.
* Wide: When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.
TV Display Screen Display
19
TV Type Screen Display
b).Select ‘Angle Mark’ using the UP/DOWN buttton, and then press the
RIGHT button to enter the submenu. Choose Angle Mark on or off
using the UP/DOWN button and then press ENTER to confirm the
setting. Press the LEFT button to return.
Angle Mark Screen Display
* On: The screen will show the angle mark icon. (*If an angle option is
available).
* Off: The screen will not display the Angle Mark Icon
20
c). Select ‘Screen Saver’ using the UP/DOWN button, and then press
the RIGHT button to enter the submenu. Choose Screen Saver on or
off using the UP/DOWN button and then press ENTER to confirm the
setting. Press the LEFT button to return.
Screen Saver Screen Display
*On: Enables screen saver
*Off: Disables screen saver (off)
*NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen.
d. Select “Last Memory” by using the UP/DOWN button.
Last Memory Screen Display
*on: The unit will return to the last position on the disc.
*off: The unit will not return to the last position on the disc.
Note: The Last position memory function will only work when the
power is on.
21
2) Select the “Video Quality Setup” page by using the LEFT/RIGHT buttons. Press “Enter” to enter the video quality set up page.
Main SETUP Menu VIDEO QUALITY
a).Select “Brightness by using the UP or DOWN buttons, then press
“Enter”. You can change the Brightness by pressing the LEFT or
RIGHT buttons. To exit “Brightness Setting”, press “Enter”again to
return to the main Menu.
BRIGHTNESS Screen Display
b).Select “Contrast” by using the UP or DOWN buttons, then press
“Enter”. You can adjust the Contrast by pressing the LEFT or RIGHT
butttons. To exit “Contrast Setting”, press “Enter” again to return to
the main menu.
22
CONTRAST Screen Display
c).Select “Hue” (Tint) by using the UP or DOWN buttons, then press
“Enter”. You can adjust the Hue by pressing the LEFT or RIGHT buttons.
HUE (Tint) Screen Display
To exit “Hue” (Tint) Setting, press “Enter”again to return to the main
Menu.
d).Select “Saturation” (color) by using the UP or DOWN buttons, then
press “Enter”. You can adjust the Saturation by pressing the LEFT or
RIGHT buttons.
SATURATION (Color)Screen Display
To exit “Saturation” (color), press “Enter”again to return to the main
Menu.
23
3).With no disc inside the player select “password” using the LEFT or
RIGHT buttons, press ‘ENTER’ to enter the password setup page,
then press the RIGHT button to enter the submenu .
PASSWORD CHANGE Menu
Press ‘ENTER’ to enter the Password Change Page. Input the Old
Password or the Default Password, the New Password, and the Confirmed New Password. Press ‘ENTER’ to confirm the change.
PASSWORD VERIFY Input Screen Display
NOTE: The Default Password is 3308. This password is always
effective even after you have selected your own password and
changed it. To avoid the possibility of others using the default
password to set the parental level and change the password, you
can record this default password in another area and delete it from
this manual. Some discs can be limited depending on the age of
users while some discs cannot.
24
4). With no disc in the player select ‘PREFERENCES’ using the LEFT
or RIGHT buttons, then press ‘ENTER’ to enter the preferences page.
a. Select ‘AUDIO’ using the DOWN button, then press ‘RIGHT’ to
enter the submenu. Select the audio language you desire using the
UP or DOWN buttons, then press ‘ENTER’ to confirm the setting.
Press LEFT to return.
Preference Audio Language
b. Select ‘SUBTITLE’ using the DOWN button, then press RIGHT to
enter the submenu. Select the desired subtitle language or SUBTITLE OFF using the UP or DOWN buttons , then press ‘ENTER’
to confirm the setting. Press ‘LEFT’ to return.
Preference SUBTITILE LANGUAGE
25
Note: Language and subtitle selection is only available for discs that are
recorded in the above listed languages. If the selected, language is
not available, the player will play and display on the screen the original
recorded language contained in the disc.
c. Select ‘DISC MENU’ using the DOWN button, then press ‘RIGHT’ to
enter the submenu. Select the Disc Menu Language you desire using
the UP or DOWN buttons , then press ‘ENTER’ to confirm the setting.
Press ‘LEFT’ to return.
Preference DISC MENU LANGUAGE
d. Select ‘PARENTAL’ using the DOWN button, then press RIGHT to
enter the submenu.
PARENTAL Preference Screen Display
Select the parental level you desire using the UP or DOWN buttons
for discs with lock-out feature. These are listed from the lowest level
(1 Kid Safe) to the highest level (Adult). Enter a 4 digit password, then
press ‘ENTER’ to confirm the parental level setting.
NOTE: The level of 8 Adult is the factory default.
26
e. Select ‘DEFAULT’ using the DOWN button, then press RIGHT to enter the submenu. Press ENTER to make all of the settings return to
the factory-set mode.
Loading Factory Setting
NOTE: The parental setting is not affected by the default reset function.
27
O. Specifications
Compatible DISC: DVD/CD/MP3/JPEG
Signal system: NTSC
Panel size: 9 inch
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4Vrms/10kOhm
Audio S/N: Better than 60 dB
Dynamic range : Better than 85 dB
Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm
Power source: DC 9-12VDC
Power consumption: 12 W
Operating temperature: 5~35°C
Weight : 0.94 kg
Dimensions (W x D x H): 9.41 X 6.26 X1.34inches
239 x 159 x 34mm
Battery Type: Ni-Mh
P. Rechargeable Battery Installation and Use
The player utilizes a set of long-life Ni-Mh batteries for a portable power
supply. Ni-Mh batteries feature high storage capacity and low level of
degradation. This means the Ni-Mh batteries do not have “Memory
Effect” and thus can be recharged safely regardless of whether the
battery is fully or only partially discharged. Please fully charge the battery prior to first use. Ensure that the battery has been charged for at
least eight hours prior to connecting it to the DVD player for the first
time.
NOTE:
If you plan not to use the battery for an extended period of time (one
week or longer), we recommend that you first fully charge the battery
and store it away properly. For longer periods of storage, please recharge the battery at least once every two months to maintain the
28
battery in optimum condition. Under no circumstances short the battery terminals, store the battery in a metal container, or leave the battery in a humid or damp environment. Ideally, store the battery in an
airtight container with desiccant or other dehumidifying agent. Each
full recharge takes approximately five-hours and one full charge can
provide power to the player for at least 2 hours.
During recharge, the red indicator will stay on. Once fully recharged,
the indicated LED on the right side of the unit will turn off. At this point
you may remove the wall plug and stop charging.
Precautions related to Battery Recharge:
1. Once the battery is fully discharged, immediately recharge (regardless of whether you plan to use battery or not) in order to maximize
battery life.
2.Recharge efficiency will degrade when environmental temperatures
drop below 50oF (10oC) or exceed 95oF (35oC).
3. Please remove battery from the player and store it properly if the
player is not to be used for long time. During this period, please recharge the battery at least once two months to avoid irreparable damage to the battery.
Using your Rechargeable Batteries
1. Please make sure you always use only the AC adapter included
with the player to recharge your batteries, the DC power adapter can’t
be used to recharge the battery.
2. To charge the battery, please connect the power jack directly into
the DVD player and leave the POWER switch in the OFF position.
29
Installing the Battery Pack:
1. First, make sure the player is in the “Power Off” mode and that the
AC power supply has been disconnected.
2. Flip down the monitor.
3. Push the battery towards the rear of the player until it locks into
position. The lock position is indicated by a click. The battery will fit
snugly to the player.
Figure 6. Installing the DVD Player Battery
Removing the Battery Pack:
1. First, make sure the player is in the “Power Off” mode.
2. Press the release button on the side of battery.
3. Pull the battery from the rear of the player.
Figure 7. Removing the DVD Player Battery
30
Q. Troubleshooting
PROBLEM
No sound or
distorted sound
SOLUTION
• Make sure your DVD player is connected
properly. Make sure all cables are securely
inserted into the appropriate jacks.
• You can’t advance through the opening
credits and warning information that appears
Can’t advance
at the beginning of movies because the disc
through a movie
is programmed to prohibit that action.
)
The icon (
appears on
screen
The feature or action cannot be
completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support the
feature (e.g., angles)
3. The feature is not available at the
moment.
4. You’ve requested a title or chapter
number that is out of range.
Picture is
distorted
• The disc might be damaged. Try another
disc.
• It is normal for some distortion to appear
during forward or reverse scan.
No forward or
reverse scan
• Some discs have sections that prohibit rapid
scanning or title and chapter skip.
• If you try to skip through the warning information and credits at the beginning of a
movie, you won’t be able to. This part of the
movie is often programmed to prohibit
skipping through it.
31
Troubleshooting (Cont)
PROBLEM
SOLUTION
IR sensor
inoperative
• Verify that the batteries in the remote are
fresh.
• Verify that the remote sensor eye is not
obstructed.
Disc won’t play
• Insert a disc with the label side facing
up.
• Check the type of disc you put into disc
tray. This DVD only plays DVDs, audio
CDs, MP3s and JPEG discs.
Play starts, but
then stops
immediately
• Both the unit and the disc are coded by
region. If the regional codes don’t
match, the disc can’t be played. This
DVD is Region Number 1.
• The disc is dirty. Clean it.
• Condensation has formed. Allow
player to dry out.
32
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of
this product that should this product or any part thereof, under normal use and conditions,
be proven defective in material or workmanship within 90 days from the date of original
purchase, such defect(s) will be repaired or replaced with reconditioned product (at the
Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered
with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to
correction of antenna problems, to costs incurred for installation, removal or reinstallation of
the product, or to damage to tapes, discs, speakers, accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/
bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL
THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO
THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the
Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions may
not apply to you. This Warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.
HAUPPAUGE, NEW YORK 11788 ! 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5556C
© 2005 Audiovox Electronics Corporation
33
128-7555