Specifications | Audiovox FPE1909DVDC Flat Panel Television User Manual

FPE1909DVDC
Dear Customers
May we take this opportunity to thank you for purchasing this LCD TV .We strongly recommend that you carefully read the safety and operation
instructions before operating your TV. FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your LCD TV found in this manual.
Safety Information

Note:
Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the
local electrical supply. If you are unsure of your power supply, ask your local power company.

CAUTION:
 To avoid electric shock, never touch the inside of the LCD TV. Only qualified technicians should open the case of the LCD TV

WARNING:
 Do not defeat the safety purpose of grounding-type. A grounding type plug has two blades and a third grounding pin. The third pin is
provided for your safety. If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug. To
do so will void the safety feature.
 To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.
2
Precautions
Please read these precautions before operating this unit.
Power cord protection:
 Never use your LCD TV if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away
from where people can trip over it.
 Be sure to hold the plug, not the cord, when disconnecting the LCD TV from an electric socket.
 Locate your LCD TV near an easily accessible AC outlet.
Placement
 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer; or sold with the apparatus. When a cart is used, use
with caution when moving the cart to avoid injury from tip-over. Follow all instructions regarding their use exactly.
 An appliance and a cart combination should be moved with care. quick stops, excessive force, and uneven surfaces may cause the
appliance and cart to overturn.
 Avoid placing the LCD TV in areas of direct sunlight, high temperature or high humidity or high levels of dust. The internal parts may be
damaged as a result.
 High temperature can cause problems. Don’t use your LCD TV in direct sunlight, and keep it away from it – unplug it immediately and
contact an authorized dealer or service center.
 Please put the LCD TV in a location with low humidity and a minimum of dust.
 Place the LCD TV on a solid surface and treat it carefully. The screen is made of thin glass with a plastic front surface and can be
damaged if dropped, hit or scratched.
Non-use Periods
 Unplug the LCD TV when it is going to be left unused for and extended period of time.
Foreign Object
 Never insert anything metallic into the cabinet openings of the liquid crystal display (LCD) TV; doing so may create the danger of electric
shock.
Keep away from water / magnetic fields
 Do not expose the LCD to rain or use it near water (in kitchens, near swimming pools, etc.). If the LCD accidentally got wet, unplug it
and contact an authorized dealer immediately.
 Do not clean the front with ketone-type materials (e.g., Acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride-as these may
damage the panel.
 Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage will occur.
Stacking
Openings in the LCD TV cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also,
avoid using the LCD TV on a bed, soft, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If
you put the LCD TV in a bookcase or some other enclosed space, be sure to provide adequate ventilation.
Servicing
 If the LCD TV does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately
and contact an authorized dealer or service center.
 Unplug your LCD TV from the AC outlet before any service.
 Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical
shock, or other hazards.

Following any service or repair, be sure the service technician performs safety checks to certify that the LCD TV
is in safe operating order.
3
Table of contents
Safety Information……………………………………………………………….……………………..………..2
Precaution………….…………………………………………………………….……………………..………..3
Table of contents……………………………………………………………….……………………..………..4
View of the Unit……………………………………………………………….……………………...……..5-6
Remote Control……...…………………………………………………………….……………………...…..7-8
For TV operation
Basic opeartion……...……………………………………………………………….………………….…..9-10
Menu.opeartion..……………………………………………………………….…………………………..11
P IC TU R E S etti ng s … … ...… …… … … …… … …… …… …… …… .… … … ……… …… …..1 2
S O U N D S e t t i n g s … … . . . … … … … … …… … … … … . . … … … … …. . … … … …… … … . … . … . . 1 3
C H A N N E L S et t i n g s … … . . . … … …… … … … … … … . . … … … … … . … …… …… … … … … . . . 1 4
S ET UP……...…… …… …… …… …… ..… …… …… .… …… …… …….…… .15
T IM E Se tt in g s……. ..…… …… … … ……… . .……… … ..… … …… ….… … …… .…. 16
LOCK Setti ngs… …. ..……… …… ……… …..… … ……..……… …… .……… ….….17
For DVD operation
Basic operation……...…………………………………………………………….………………….…..18-20
G E N E RA L Se tti n g s … …… .… …… …… …… …… …… … … … .… … … … … …… …… …. .2 1
A N AL OG A U DI O Set ti n gs …… …. …… … … …… … … …… …. … …… …… …… …… …..2 2
P R E FE R E N C E S e t t i n g s … … … … … … … … …… … … … … … … . … … … … … … … … … … . . 2 3
Specifications……...…………………………………………………………….…………………………....24
4
The View of the Unit
STATUS LED
The LED will turn red in standby mode, and turn green in the on mode
IR
Infrared Receiver
VOL+/VOL- button
Decrease and increase volume.
MENU button
Press once to display the OSD (on screen display), press again to turn the OSD off.
CH+/CH- button
Decrease and increase channels.
SOURCE button
Press this button to select TV, AV, S-Video, DVD, PC or SCART mode.
STANDBY button
Press this button to turn the
LCD on or off.
NOTE: Ensure Main Power Swith on back of LCD TV Is set to ON.
Press this button to open the disc tray
Press this button to PLAY OR PAUSE the disc
5
The View of the Unit
6
Remote Control
1
POWER button
2
NUMERIC buttons (0-9 and -/--)
3
MENU button
4
DIRECTION and ENTER/PLAY button
5
INFO button
6
SLEEP button
7
MUTE button
8
PLAY/PAUSE button (DVD only)
9
STOP button (DVD only)
10
GOTO button (DVD only)
11
A-B button (DVD only)
12
TITLE button (DVD only)
13
ANGLE button (DVD only)
14
FAST REVERSE button (DVD only)
15
FAST FORWARD button (DVD only)
16
SOURCE button
17
CH+/CH- button
18
VOL+/VOL- button
19
RETURN button
20
DVD SETUP button(DVD only)
21
EJECT button(DVD only)
22
PICTURE button
23
SOUND button
24
EXIT button
25
CCD button(DVD only)
MENU button(DVD only)
26
F-LIST button
REP.button(DVD only)
27
CH-LIST button
7
28
AUDIO button(DVD only)
29
SUB button(DVD only)
30
Chapter Forward button(DVD only)
31
Chapter previous button(DVD only)
Remote Control
Battery installation
Insert the batteries while observing the correct (+) and (-) polarities.
Service life of batteries

The batteries normally last for about one year although this depends on how often and for what operations the remote control is used.

If the remote control unit fails to work even when it is operated near the unit, replace the batteries.

Use 2 x “AA” type batteries
Notes:

Do not use rechargeable (NI-Cd) batteries.

Do not attempt to recharge, short-circuit or disassemble batteries. Never place
batteries close to a heat source such as radiators or heaters.

Dispose of batteries in a responsible manner. Never throw batteries into a fire.

Do not drop or step on the remote control unit. This may damage the parts or lead to
malfunction.

Do not mix old and new batteries.

If the remote control unit is not going to be used for long time, always remove the
batteries to prevent leakage.
Remote control operation range
Point the remote control no more than about 6m for the remote control sensor and within 60º from the Infrared Receiver

The operating distance may vary according to the brightness of the room.
Notes:

Do not point bright lights at the remote control sensor.

Do not place objects between the remote control and the infrared receiver

Do not use this remote control while simultaneously operating the remote control of any other equipment.
8
Basic operation (For TV Opeartion)
Connect the power supply.
1.
Connect the power, then press the STANDBY button on the front panel to turn on the unit.
2.
Press the SOURCE button to select TV mode, then press RIGHT button to confirm.
3.
Adjust the volume.
Adjust the volume
Press VOL- button to decrease the volume.
Press VOL+ button to increase the volume.
Mute the volume
Press MUTE on the remote control during playback to turn off the sound, press it again to turn on the sound.
Select Input source
Press SOURCE button:
Use UP/DOWN arrows to select the desired one, then press RIGHT arrow to confirm.
Viewing the TV programs
Press SOURCE button to select TV input mode first.
Select programs
Press CH+ or CH- to select the programs up or down, or press “- / - -“ button until the screen appears “-”or “ - -”, then press 0-9 numeric buttons
to select the programs from 0 to 99.
Select the picture mode
Press PICTURE button to select the picture mode:
Personal
Standard
Dynamic
Soft
Music
Movie
Select the sound mode
Press SOUND button you can select the sound mode:
Personal
Standard
9
Sleep function
Press SLEEP button to set up the sleep time to shut down your monitor.
You can select 15, 30, 45, 60, 90, or 120 minutes and off by pressing the SLEEP button continually.
Viewing the AV SOURCE such as DVD\VCR\CAMCORDER
Press the SOURCE button
Select the suitable input to pickup the AV signal.
10
Navigating the Menu
1.
Press MENU button on the remote control, the on-screen menu will appear on the screen. Use the UP/DOWN buttons to select your
main menu option.
2.
PICTURE MENU
SOUND MENU
Make agjustments to your picture settings.
Customize the audio option and effects.
TIME MENU
SETUP MENU
Set up a varity of time options.
Set up a varity of features
LOCK MENU
CHANNEL MENU
Set up a varity of features.
Edit channels.
Use the LEFT/RIGHT/UP/DOWN buttons to select an option of the sub-menu. While in adjustment mode, use the LEFT/RIGHT buttons to
change the value of the item.
3.
Press the MENU button to exit the menu.
Note:
Not all options are available for every source
11
PICTURE Settings
1.
Press the
MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
PICTURE menu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual PICTURE option, use the LEFT and RIGHT buttons to change the
setting, and press the MENU to exit .
3.
The PICTURE menu includes the following options:
Picture Mode
Cycles among picture display modes: Personal, Standard, Dynamic, Soft.
Brightness
Controls the overall brightness of the picture
Contrast
Controls the difference between the brightest and darkest regions of the picture.
Color
Controls the color
Tint
Controls the tint
Sharpness
Increase this setting to see crisp edges in the picture; decrease it for soft edges.
Color Mode
Cycles among color display modes: Normal,Cool, Warm.
12
SOUND Settings
1.
Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
SOUND menu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual SOUND option, use the LEFT and RIGHT buttons to change the setting,
and press the MENU to exit
3.
The SOUND menu includes the following options:
Sound Mode
Cycles among sound display modes: Personal, Standard, Music, Movie.
Bass
Controls the relative intensity of lower pitched sounds.
Treble
Controls the relative intensity of higher pitched sounds
Balance
To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track.
Mute Select
You can choose the mute
AVC
Can choose on or off.
Audio Language
Can choose ENGLISH,FRENCH,SPANISH.
13
CHANNEL Settings
1.
Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
CHANNEL menu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT buttons to change the
setting, and press the MENU to exit
3.
The CHANNEL menu includes the following options:
Antenna
You can choose between Air and Cable.
Auto Scan
Auto scan the channel
Favorite
Choose your favorite channel.
Channel NO.
Display the channel number.
Channel Label
Display the broadcast channel identification
DTV Signal
Display the DTV Signals.strength
14
SETUP Settings
1.
Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
SETUP menu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual SETUP option, use the LEFT and RIGHT buttons to change the setting,
and press the MENU to exit.
3.
The SETUP
menu includes the following options:
MENU Language
Selects to display all on-screen menus in your language of choice
Transparency
Can choose on or off.
Zoom Mode
Allows you to select the zoom Modes: Normal, Cinema, Wide ,and Zoom
Noise Reduction
Allows you to select the Noise Reduction modes: Strong,Off ,Weak, and Middle.
Advance
Advance
Close Capation
Select available closed caption broadcast formats
Audio Only
Turn off LCD,Audio is still present for music playback
Restore Default
Restores all settings to factory settings
15
TIME Settings
1.
Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
TIMEmenu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual TIME option, use the LEFT and RIGHT buttons to change the setting,
and press the MENU to exit
3.
The TIME menu includes the following options:
Sleep timer
Choose the sleep timer.
Time Zone
Choose the time zone.
Daylight Saving Time
Choose on or off.
16
LOCK Settings
1.
Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
LOCKmenu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual LOCK option, use the LEFT and RIGHT buttons to change the setting,
and press the MENU to exit.
3.
The LOCK menu includes the following options:
Change Password
Choose a new password.
System Lock
Allow you to turn on or off.the system lock
Canada
Allow you to choose Canada or Canada French
RRT Setting
Reset RRT
Allow you to reset the RRT setting
17
Basic DVD Operation
Connect the power supply.
1.
Connect the power ,then press the STANDBY button to turn on the unit.
2.
Press SOURCE button to select DVD input mode and press RIGHT button to confirm.
3.
Press EJECT on the remote control to open the disc tray, then insert a disc correctly.
4.
Press the PLAY button to start play. (some discs may play automatically)
When a menu screen appears on the TV screen.
In case of interactive DVDs with control, a menu screen appears on the screen.
Press UP/DOWN/LEFT/RIGHT buttons and press ENTER to select the desired item. Play of the selected item now begins.
For further information, also refer to the jacket or case of the disc you are playing.
After operation
When the unit is not in use, remove the disc and turn off the unit.
Note:

When “
” appear on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing.

Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing.
Stop Play
Temporarily Stop
Press STOP during playback, the unit records the point where STOP was pressed (resume function).
Press PLAY and play will resume from this point.
Fully Stop
Press STOP twice during playback, or press STOP during temporarily stop mode, the unit will fully stop
Press PLAY and play will from the beginning of the disc..
Note:

The resume function may not be available on some DVD disc
Still picture
Press PAUSE during playback. The player will be placed in the pause mode.
To resume normal playback, press PLAY.
Skipping Chapters and Tracks Forward or Back
Skipping forward
Press NEXT

on the remote control during playback.
A chapter (DVD) or a track (CD) is skipped each time the button is pressed.
Skipping back
Press PREV

on the remote control during playback.
A chapter (DVD) or a track (CD) is skipped each time the button is pressed.
18
Random playback
Press RANDOM during playback. In random mode, if you press
, it may be skip to a random chapter instead of next chapter. Press
RANDOM again to return normal playback.
To Scan at Fast Forward or Fast Reverse playback
You can press

or
button on the remote control during playback.
[Screen display]
X2
X2
The speed of advance (reverse) is relatively slow at first. When the button is pressed again, the speed becomes faster. (Each time the button
is pressed, the disc will be played forward or backward at double (×2) speed. With each subsequent press, the disc will be played back at ×2,
×4, ×8, ×16 or ×32 speed and PLAY. Press PLAY button to return to normal play).
The speed will be retained even after the button is released.
To return to normal playback, press PLAY, or ENTER on the remote control.
Note:
The DVD player does not play back sound during fast forward or fast reverse playback.
Using a Title Menu
Some movie discs may contain two or more titles. If the disc has a title menu recorded on it, the TITLE button can be used to select the movie
title. (The details of operation differ depending on the disc used.)

Select a title may not be possible on certain DVD disc.
1.
Press TITLE
2.
Press UP/DOWN/LEFT/RIGHT buttons and press ENTER or PLAY, to select desired title.
A list of the title on the disc will be displayed.
The selected title now starts playing.
Using a DVD Menu
Some DVD have unique menu structures called DVD menus. For example, DVD programmed with complex contents provide guide menus, and
those recorded with various languages provide menus for audio and subtitle language. Although the DVD menu’s contents and operation differ
from disc to disc, the following explains the basic operation when this feature is used.
1.
Press MENU
2.
Press UP/DOWN/LEFT/RIGHT buttons and press ENTER or PLAY, to select desired item.
The DVD menu available on the disc will be displayed.
The selected title now starts playing.
Changing Subtitle Language
It is possible to change the subtitle language. This operation works only with discs on which multiple subtitle languages are recorded.
Press SUBTITLE repeatedly until the desired language is selected.
For your reference:
If the power is reset or the disc is removed, subtitles will appear in the default language set by the DVD player.
Changing Audio Soundtrack Language
It is possible to change the audio soundtrack language
of the DVD disc. This operation works only with a DVD when multiple audio
soundtrack languages are recorded.
Press AUDIO repeatedly until the desired audio language is selected.
19
Viewing from another Angle
Some DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can
be viewed from each of these different angles using the ANGLE button. (The recorded angles differ depending on the disc used.)
Press ANGLE repeatedly until the desired angle is selected.
For your reference:
This function only works for discs having scenes recorded at different angle.
Repeat Play
Press REPEAT during playback.
Each time this button is pressed, the screen changes as:
CHAPTER,
TITLE,
ALL and normal playback.
Repeat A-B
Repeating sections between two specific points
Press the A-B button on the remote at the point where you wish the repeat play to start. The display will show
the point where you wish the repeat play to finish. The display will show
A B. The A-B segment will now repeat continuously until the
B button is pressed for a third time.
Search a Specific Title, Chapter
You may directly enter a time, title or chapter number to search fast on a disc, the player plays from that point.
20
A. Press A-B button again at
A
GENERAL Settings
1.
Press the SETUP button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
GENERAL SETUP menu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual GENERAL SETUP option and to change the setting. Press the SETUP
to exit the menu.
3.
The GENERAL menu includes the following options:
TV SYSTEM
Cycles among TV SYSTEM modes: AUTO,PAL,.NTSC
SCREEN SAVER
To turn on or off the SCREEN SAVER.
TV TYPE
Cycles among TV TYPE : 4:3PS , 4:3LS , 16:9.
PASSWORD CHANGE
To CHANGE PASSWORD The default password is 0000.
PANTINGA
Selects to display all on-screen menus
POWER RESUME
To turn on or off the POWER RESUME.
DEFAULT
DEFAULT
21
PREFERENCE Settings
1.
Press the SETUP button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
PREFERENCE menu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual PREFERENCE option and to change the setting. Press the SETUP to
exit the menu.
3.
The PREFERENCE menu includes the following options:
OSD LANGUAGE
Selects to display all on-screen menus in your language of choice
AUDIO LANG
Selects to display all on-screen menus in your language of choice
SUBTITLE LANG
Selects to display all on-screen menus in your language of choice
MENU LANG
Selects to display all on-screen menus in your language of choice
22
ANALOG AUDIO Settings
1.
Press the SETUP button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the
ANALOG AUDIO SETUP menu.
2.
Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual ANALOG AUDIO option and to change the setting. Press the SETUP to
exit the menu.
3.
The ANALOG AUDIO menu includes the following options:
Dynamic
Allows you to adjust the Dynamic range compression
23
Specifications
Lcd panel
INPUT
Size
19 ’’
Resolution
1440
Brightness
300
Contrast ratio
800:1
Viewing angle
170/160 (H/V)
VIDEO
1
COMPONENT
1
VGA/ VGA AUDIO
1
RF
1
AUDIO(L/R)
2
HDMI
1
POWER SOURCE
DC-12V
Standard
Note : Design and specifications are subject to change without notice.
Weight and Dimensions shown are approximate.
24
x 900
Download PDF

advertising