Audiovox FPE3206DV TV DVD Combo User Manual

31.5” LCD TV with DVD Player Operating Instructions Model No. FPE3206DV For assistance, please call: 1­800­645­4994 Or visit us at WWW.AUDIOVOX.COM Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference 128­7728
Table Of Contents Important Safety Instructions­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­2 Product Features­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­4 Disc Information­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­5 Front Panel­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­6 Rear Panel­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­8 Remote Control­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­9 Special Features of the DVD Module­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­12 System Connections­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­13 Connecting to External AV Signal Source (AV1) ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ 13 Connecting to External AV Signal Source (AV2) ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ 14 Connecting to External AV Signal Source (AV3 / AV4) ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­15 Connecting to HDMI Output Device­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­16 Connecting to External AV Device (AV Out) ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­17 Connecting to Digital Amplifier ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­18 Connecting to PC ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­19 Connecting to TV Signal Input­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­20 Connecting to Power Supply­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­20 Connecting to Earphone­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­21 Input Source Selecting­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­22 System Setup and Operation­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­23 Preparations­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­23 Setup Setting­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­23 Video Setting­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­24 Audio Setting­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ 26 Feature Setting­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­27 DVD Player Operation­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­30 USB and SD/MS/MMC Card Function­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­34 DVD System Setup­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­35 Troubleshooting­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­43 Specifications­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­44
1 Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un­insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: Laser radiation when open. Do not stare into beam.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY: Connect the supplied adapter to the side of the DVD player in the slot marked “Power In”. Plug the two­prong end of the power cord to an AC110­220V outlet. If you have difficulty inserting the plug, turn it over and reinsert it, if the unit will not the used for a long time, disconnect the plug from the outlet. NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. ­ 2 ­ Important Safety Instructions Note: IMPORTANT FOR LASER PRODUCTS Read these instructions. 1. CLASS 1 LASER PRODUCT Keep these instructions. 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. Heed all warnings. 3. CAUTION: Do not open the top cover. There are no user Follow all instructions. serviceable parts inside the unit. Leave all servicing to qualified service personnel.
Do not use near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding­type plug. A polarized plug has two blades with one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip­over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power­supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 1. 2. 3. 4. 5. 6. 7. NOTE: Never touch the color TFT LCD screen with your hand. Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. ­ 3 ­ Product Features This product is designed with movable Disc Tray. The Disc Tray can be installed in three different positions. The movable Disc Tray offers you the flexibility to choose which direction to insert your DVD in order to maximize your space. The unit incorporates high­resolution LCD display, DVD player and TV receiver in one system. Multiple Mode TV AV1 (Composite 1) AV2 (Composite 2) AV3 (Component 1) AV4 (Component 2) VGA HDMI DVD High Quality Features Movable Disc Tray The unit is designed with a movable Disc Tray. The tray can be installed in three different positions; on top, on bottom, or on the side of the LCD. The movable Disc Tray offers you the flexibility to choose which direction to insert your DVD in order to maximize your space. TV Signal Input Supports ATSC and NTSC signals so you can receive more TV programs. TV Function Auto program scan and manual program searching, provide you more convenience. Channel Edit Function Supports channel edit function, you can edit the channel for your preference. Special Function Supports V­CHIP, CCD and sleep timer setting functions. USB and CARD PORTS Designed with USB and SD/MS/MMC card port, can be connected to USB device or SD/MS/MMC Card. ­ 4 ­ High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. Superior sound Supports SRS and SAP function, reproduce high quality sound. LCD (Liquid Crystal Display) Designed with 31.5" plasma display that clearly shows your picture. Stereo amplifier Built­in 2x10w speakers provide high quality sound. AV And VGA Input Can be connected to external audio and video signal source and PC. Color Separation Function Built­in 3D Y/C chroma chip to separates luma and chroma effectively. Multi­audio and Multi­video modes Supports Multi­audio and multi­video modes, provide more selections. Advanced Playing Features Compatibility DVD, CD, CD­R, CD­RW and JPEG discs compatible. All Playback Functions Fast forward, fast reverse and repeat playback. Special playback. Support multi­angle, multi­language and multi­subtitle playback.
Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS­SL) DVD Audio+Video (active picture) 12cm 242min(SS­DL) 266min(DS­SL) 484min(DS­DL) CD JPEG l l Audio Still high resolution 12cm 74min 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. The DVD Player will play most recordable (CD­R) or erasable (CD­RW) CDs, but playback of CD­R or CD­RW discs created on a computer requires proper formatting and finalization of the disc for audio playback. Some computers and/or software programs may not be capable of creating compatible discs. About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, “title”. Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching. But some discs may not have a recording chapter. Track A segment of picture or music on a CD. Each track is numbered for searching.
­ 5 ­ Front Panel Front and Right View 1. 2. 3. 4. 5. 31.5" Color TFT screen 31.5" color TFT screen clearly shows your picture. SOURCE button Press to enter the source­selecting menu and then use the ▲▼ buttons to select mode: TV, AV1 (Composite1), AV2 (Composite 2), AV3 (Component1), AV4 (Component2), VGA, HDMI or DVD, then press the Enter button to enter the selected mode. MENU button Press to enter or exit system setup menu. CH ▲/▼button In TV mode, press to select channels. In setup menu, the same function as ▲/▼ direction buttons. VOL ▲/▼ button Press to decrease or increase the volume, the same function as ◄/► direction buttons in setup menu.
­ 6 ­ Front Panel(Continued) 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. STOP button Press to stop playback in DVD mode. PLAY button Press to start playback in DVD mode. EJECT button Press to eject the disc out from the disc tray. POWER button Press to enter or exit the standby mode. Disc Tray Slot Insert disc into this slot. SD/MS/MMC card port Insert SD/MS/MMC card into this slot. USB Port Connecting to the USB device. Remote Sensor Remote sensor window for the remote control. Power Indicator In standby mode, it turns red; when operation it is blue. Speakers Provides high quality sound.
­ 7 ­ Rear Panel Rear View Open the back cover on the right side of the unit’s rear panel, all the jacks will appear, as shown on the figure below: 1. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks Connecting for the Y/Pr(Cr)/Pb(Cb) input in AV3 (Component) mode. 2. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks Connecting for the Y/Pr(Cr)/Pb(Cb) input in AV4 (Component) mode. 3. Video and L/R audio Input Jacks Connecting for the audio and video signal input in AV1 (Composite) mode. 4. Video/S­VIDEO and L/R audio Input Jacks Connecting for the audio and video/S­Video signal input in AV2 (Composite) mode. The Video and S­Video is with the same L/R audio jacks, and the S­Video is the priority. 5. Earphone Jack Used for connecting to the earphone. 6. TV Signal Input Jack Connected to TV antenna in TV mode. 7. VGA Input Jack Connected to the VGA output jack of the PC in VGA mode. 8. HDMI Jack Connected to the HDMI. 9. OPTICAL audio output Jack Connected for the optical digital audio (SPDIF) output. 10. AV Output Jack Connecting for the audio and video signal output. 11. Power In Jack Connected to power supply.
­ 8 ­ Remote Control Remote Control Buttons Functions For TV Operation 7. 8. 9. 10. 11. 12. 13. 14. 15. 1. 2. 3. 4. 5. 6. POWER button Press to enter or exit the standby mode. 0~9 Number buttons Press to select numbers. MTS button In TV mode, press to shift mode among SAP, Mono and Stereo. VOL +/­ button Press to increase or decrease the volume. MUTE button Press to turn on or off the speaker output. SOURCE button Press to enter the source­selecting menu, then use the ▲▼ button to select mode: TV, AV1 (Composite1), AV2 (Composite2), 16. 17. 18. 19. 20. ­ 9 ­ AV3 (Component1), AV4 (Component2), VGA, HDMI or DVD, press the Enter button to enter the selected mode. Direction buttons(▲▼◄►) In the setup menu, press the ▲▼ button to select the desired items, press the ◄► button to adjust. ENTER button Press to confirm selection or exit the setup in the setup menu. SLEEP button Press to set the sleep time. TV button Press to shift to TV mode. SIGNAL button Press to display the ATSC signal status. button Press number buttons to select channel and then press the button to confirm and go the selected channel. +10/­ button In TV mode, press the number buttons to select channel first, then press this button and add number button “0” or one number from “1~5” to select analog or digital TV program. Add “0” for analog TV program, add one number from “1~5” for digital TV program. LAST button In TV mode, press to return to the channel last viewed. CH 5/6button In TV mode, press to select channels. FREEZE button Press to freeze the current picture. MENU button Press to enter or exit the system setup menu. EXIT button Press to exit system setup menu. CC button Press to display among CC1, CC2, CC3, CC4 or CC function OFF. INFO. Button Press to display the current mode information on the screen.
Remote Control(Continued) Remote Control Drawing 8. For DVD Operation 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 1. 2. 3. 4. 5. 6. 7. PLAY button Press to play the disc. ; PAUSE button In DVD mode, press to pause the playback or start step frame by frame playback. Press the 4 PLAY button to resume normal playback. 7 Fast Backward button Press to search backward fast. 8 Fast Forward button Press to search forward fast. 0~9 Number buttons Press to select numbers. Direction buttons(▲▼◄►) In the setup menu, press the ▲▼ button to select the desired items; press the ◄► button to adjust. ENTER button Press to confirm selection or exit the setup in the setup menu. 19. 20. 21. 22. 23. 24. ­ 10 ­ AUDIO button Press to select audio language when the DVD disc with multiple audio languages is played. ANGLE button Press to select various camera angles (if the DVD disc contains multiple camera angles). DVDMENU button Press to access the disc menu in DVD mode. SETUP button Press to access the DVD setup menu. DVD DISPLAY button Press to display reference information. ZOOM button Press to realize various zoom effects. EJECT button Press to eject the disc out. ■ STOP button Press to stop playback, then press the 4PLAY button to resume normal playback. Press this button twice repeatedly to stop completely. : NEXT button Press to skip to the next chapter/track for some discs. 9 PREV button Press once to skip to the beginning of the current chapter/track. Press twice repeatedly to skip to the previous chapter/track for some discs. +10/­ button Press the button and 0~9 number buttons to select number greater than 9. CARD button Press to shift to USB or CARD mode when there is the input source. TITLE button During a DVD disc playback, press to go to title menu if the disc contains. SUBTITLE button Press to select different subtitle languages during a multiple language DVD disc playback. REPEAT button Press to repeat a chapter, track, title, or all content. GOTO button Press to select the desired disc starting time, title or chapter, etc. A­B button Press to play a certain selected segment repeatedly.
Remote Control(Continued) Preparation of Remote Control Using Remote control Softly push the back cover to open the battery Point the remote control unit from no more than compartment. about 7m from the remote control sensor and within about 60 degrees of the front of the unit.
Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. ·
The operating distance may vary depending to the brightness around. Softly press the back cover to close it. NOTE:
·
Do not point bright lights directly at the remote control sensor.
·
Do not place objects between the remote control unit and the remote control sensor.
·
Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.
l Under normal use the battery will last for six months. l Take out batteries when the remote is not in use for a long time. ­ 11 ­ Special Features of the DVD Module NOTE: before removing or installing the DVD module, make sure unplug the power supply cord. The unit supports to install the extended functional modules in three different positions and supports to install two functional modules at the same time. Please follow the below steps to remove or install the function module. Remove the DVD module: Refer to the below figure and follow the below steps to remove the DVD module from the unit: Step 1: Open the back cover on the left rear panel of the unit. Step 2: remove the DVD module. 1. Loose the screw on the DVD module. 2. Unplug the MGI connecting cord from the LCD TV. 3. Remove the DVD module outward. Step 3: close the back cover. Installing the DVD module: There are three different positions for installing the functional module, and two MGI jacks for connecting the MGI connecting cord. Select one proper position for installing: 1. Plug one end of the MGI connecting cord into the DVD module. 2. Open the back cover on the left rear panel of the unit. 3. Insert the function module and lock the function module with one screw. 4. Plug the other end of the MGI connecting cord into the MGI jack on the unit. 5. Close the back cover.
­ 12 ­ System Connections
·
Do not connect the power cord until all other connections have been made.
·
Ensure that you observe the color cables when connecting audio and video cables.
·
Before connecting, open the cover on the right side of the unit’s rear panel. Connecting To External AV Signal Source (AV1) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source, press the SOURCE button to enter the Input menu, then select AV1 (Composite) and press the ENTER button to enter the selected mode.
­ 13 ­ System Connections Connecting To External AV Signal Source (AV2) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source. Also use the S­Video cable to connect the S­Video input jacks on the right side of the unit’s rear panel to the external AV signal source. NOTE: S­VIDEO cable will produce good image quality. After connection, turn on the power of the unit and the external AV signal source, press the SOURCE button to enter the Input menu, then select AV2 (Composite) and press the ENTER button to enter the selected mode. If connected to the two group AV and S­Video signal sources at the same time, the S­Video is the priority.
­ 14 ­ System Connections Connecting to External AV Signal Source(AV3/ AV4) Use the audio and video cables to connect the Y/Pb (C b) /Pr (Cr) input Jacks on the right side of the unit’s rear panel to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source, press the SOURCE button to enter the Input menu, then select AV3 (Component) or AV4 (Component) and press the ENTER button to enter the selected mode. NOTE: The Component cable will produce better image quality.
­ 15 ­ System Connections Connecting to HDMI Output Device This unit can be connected to the AV device with HDMI output. See the below figure for details: After connection, turn on the power of the unit and the external HDMI output device, press the SOURCE button to enter the Input menu, then select HDMI and press the ENTER button to enter the HDMI mode.
­ 16 ­ System Connections Connecting to External AV Device (AV Out) Use the audio/video cables to connect the audio and video output Jacks on the right side of the rear panel to the external AV device. NOTE: The features of this A/V equipment allows you to connect to other A/V equipment. Care should be taken when connecting the A/V outputs of this device to the A/V inputs of the other device. For example, composite output of this device needs to be connected to composite inputs of the other device.
­ 17 ­ System Connections Connecting to Digital Amplifier The unit is designed with an optical digital audio jack, can be connected to the digital amplifier, see the below figure: NOTE: The optical digital audio can only output ATSC, NTSC and HDMI signals.
­ 18 ­ System Connections Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the right side of the unit’s rear panel. 2. Connect the other end to the PC. 3. Connect one end of the audio cables to the PC audio input jack on the right side of the unit’s rear panel. 4. Connect the other end to the PC audio output jack. 5. You had better set the PC’s resolution at 1024×768; and the refresh frequency must at 60Hz. After connection, press the SOURCE button and select VGA mode.
­ 19 ­ System Connections(Continued) Connecting to TV Signal Input This unit can be connected to the TV signal input source via the 75Ω antenna jack on the rear panel. After connection, turn on the power of the unit and press the SOURCE button and select TV mode. Connecting to Power Supply One end is connected to the jack on the rear panel of the unit, the other end to the AC110~220V wall outlet.
­ 20 ­ System Connections(Continued) Connecting to Earphone This unit can be connected to an earphone for listening music privately. See the below figure for details: When the headphone is connected, the speakers will turn off automatically. NOTE: Excessively loud volume could damage your hearing. So turn down the volume before you connect the headphones, and then raise the volume to comfortable level.
­ 21 ­ Input Source Selecting The player incorporates multiple video modes, you can select the video mode according to the input signal. Press the SOURCE button to enter the Input menu, the screen will display as below: In the menu, press the 56 direction button to select the video mode, press the ENTER button to enter the selected mode. NOTE: If connected to external AV and S­Video signal input source at the same time, the AV1(Composite) is for video1 input, the AV2(Composite) is for S­Video input, the video2 input can not be selected. If installed with extended functional module DVD or PVR, DVD or RECORDER will be displayed on the screen for selecting.
­ 22 ­ System Setup and Operation Preparations 1. After connection, press the POWER button to turn on the power. 2. Press the SOUECE button to display the Input menu, then press the 56 button to select TV and press the ENTER button to enter TV mode. You can go on with the following setups: Setup Setting Press the MENU button to enter the main setup menu, as shown on the right: In the menu, press the ▲▼ button to select the SETUP, and then press the ◄ or ► button to enter the setup menu, press the ▲▼ button to select items. Press the ◄ or ► button again to return to the previous menu. Press the EXIT button to exit the setup menu. Tuning Band Press the ▲▼ button to select the Tuning Band, press the ENTER button to select Air or Cable. DTV Signal Press the ▲▼ button to select the DTV Signal, press the ENTER button, the screen will display the DTV Signal status, press the ENTER button again to return to the previous menu. Auto Ch Search Press the ▲▼ button to select the Auto Ch Search, press the ENTER button to enter the Auto program Menu and begin auto searching, see the right figure: After auto­searching, the unit will exit and memorize the programs in sequence automatically. It will go to the first searched channel. During searching, press the EXIT button to exit.
­ 23 ­ System Setup and Operation(Continued) Manual Ch Search Press the ▲▼ button to select the Manual Ch Search, press the ENTER button to enter the Manual Channel Set Menu, see the right figure: In the menu, press the 3456direction buttons to select items, press the ENTER button to confirm or set, press the EXIT button to exit. Channel Labels Press the ▲▼ button to select the Channel Labels, press the ENTER button to enter the Channel Labels Menu, see the right figure: In the menu, press the 34direction buttons to select the item you want to set, press the 56 button to set the item, press the EXIT button to exit. Menu Language Press the ▲▼ button to select the Menu Language, press the ENTER button to select the menu language you prefer. Video Setting Press the MENU button to enter the main setup menu, as shown on the right: In the menu, press the ▲▼ button to select the Video, and then press the ◄ or ► button to enter the setup menu, press the ▲▼ button to select items. Press the ◄ or ► button again to return to the previous menu. Press the EXIT button to exit the setup menu.
Contrast Press the ▲▼ button to select the Contrast, press the ENTER button to enter the adjusting mode, then press the ◄ ► button to adjust the value. Press the ENTER button again to confirm and return. ­ 24 ­ System Setup and Operation(Continued) Brightness Press the ▲▼ button to select the Brightness, press the ENTER button to enter the adjusting mode, press the ◄ ► button to adjust the value. Press the ENTER button again to confirm and return. Sharpness Press the ▲▼ button to select the Sharpness, press the ENTER button to enter the adjusting mode, press the ◄ ► button to adjust the value. Press the ENTER button again to confirm and return. Color Press the ▲▼ button to select the Color, press the ENTER button to enter the adjusting mode, press the ◄ ► button to adjust the value. Press the ENTER button again to confirm and return. Tint Press the ▲▼ button to select the Tint, press the ENTER button to enter the adjusting mode, press the ◄ ► button to adjust the value. Press the ENTER button again to confirm and return. Backlight Press the ▲▼ button to select the Backlight, press the ENTER button to enter the adjusting mode, press the ◄ ► button to adjust the value. Press the ENTER button again to confirm and return. Aspect Ratio Press the ▲▼ button to select the Aspect Ratio, press the ENTER button to select desired item: normal, zoom, wide and Cinema. Restore Default Settings Press the ▲▼ button to select the Restore Default Settings, press the ENTER button, all the settings on this setup page will return to the default status.
­ 25 ­ System Setup and Operation(Continued) Audio Setting Press the MENU button to enter the main setup menu, as shown on the right: In the menu, press the ▲▼ button to select the Audio, and then press the ◄ or ► button to enter the setup menu, press the ▲▼ button to select items. Press the ◄ or ► button again to return to the previous menu. Press the EXIT button to exit the setup menu.
Audio Language Press the ▲▼ button to select the Audio Language, press the ENTER button to select the desired audio language. TRUBASS Press the ▲▼ button to select the TRUBASS, press the ENTER button to enter the adjusting mode, then press the ◄ ► button to adjust the value. Press the ENTER button again to confirm and return. Digital Audio Output Press the ▲▼ button to select the Digital Audio Output, press the ENTER button to select RAW or PCM. NOTE: Select PCM to output a dual channel audio signal; select RAW to output an original audio signal. TV Speaker Press the ▲▼ button to select the TV Speaker, press the ENTER button to select On or Off. Mode Press the ▲▼ button to select the Mode, press the ENTER button to select audio mode. Restore Default Settings Press the ▲▼ button to select the Restore Default Settings, press the ENTER button, all the settings on this setup page will return to the default status. ­ 26 ­ System Setup and Operation(Continued) Feature Setting Press the MENU button to enter the main setup menu, as shown on the right: In the menu, press the ▲▼ button to select the Feature, and then press the ◄ or ► button to enter the setup menu, press the ▲▼ button to select items. Press the ◄ or ► button again to return to the previous menu. Press the EXIT button to exit the setup menu. Time Set Press the ▲▼ button to select the Time Set, press the ENTER button to enter the Time Set Menu, see the right figure: In the menu, press the 56 direction buttons to select items, press the EXIT button to exit.
Time Set Mode Press the ▲▼ button to select the Time Set Mode, press the ◄ or ► button to select the Auto or Manual. Select Manual, you can set all the items. Time Zone Press the ▲▼ button to select the Time Zone, press the ◄ or ► button to select the correct time zone according to your local time zone. Year Press the ▲▼ button to select the Year, press the ◄ or ► button to select the year. Date Press the ▲▼ button to select the Date, press the ◄ or ► button to select the date. Time Press the ▲▼ button to select the Time, press the ◄ or ► button to select the time. NOTE: the Year, Date and time only can be set when the time set mode is set to “Manual”. Sleep Timer Press the ▲▼ button to select the Sleep Timer, press the ENTER button to select the sleep time or Off. ­ 27 ­ System Setup and Operation(Continued) Advanced Video Menu Press the ▲▼ button to select the Advanced Video Menu, press the ENTER button, the screen is shown as right figure: In the menu, press the 56direction buttons to select items, press the ENTER button to set, press the EXIT button to exit. Password Set Press the ▲▼ button to select the Password Set, press the ENTER button, the screen is shown as right figure: Use the number buttons to input the password. The original password is 0000. According to the indication, input a new password and input it again for confirmation. The password has changed. Parental Control Press the ▲▼ button to select the Parental Control, press the ENTER button, an indication will be displayed on the screen, you should input password. The Parental Control setting is a parental control rating function. Depending on the program, you can edit violence, language and explicit content. Use the number buttons on the remote control to input the password and then Parental Control menu below will display on the screen. The default password is 0000.
­ 28 ­ System Setup and Operation(Continued) Fantasy violence [FV], adult languages [L], sexual situations [S], violent scenes [V] and suggestive dialogues [D] In the menu, press the 3456direction buttons to select MPAA or TV rating, press the ENTER button to set or cancel the rating. Press the EXIT button to exit the setup menu. Closed Caption Options Press the ▲▼ button to select the Closed Caption Options, press the ENTER button, the screen is shown as right figure: In the menu, press the 56direction buttons to select items, press the ENTER button to set, press the EXIT button to exit. You can see the change at the bottom of the menu.
In the AV1, AV2, AV3, AV4, VGA, HDMI mode, you can refer to the setups in the TV mode to set the items. ­ 29 ­ DVD Player Operation Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the SOURCE button and select DVD mode, press the ENTER button confirm and shift to DVD mode. 2. Handing the disc with its printed side outward vertically to the disc tray. (Referring to the below picture.) 3. Gently put the disc into the disc tray. 4. Disc will automatically be pulled into the disc player. While the disc is loading, “Loading” will appear on the liquid crystal display and playback will begin. Warning: Do not play poor quality discs that may damage the player. DVD Playback Region Code DVD players and discs are coded by region. These regional codes must match the played discs. If the codes don’t match, the disc cannot be played. This player’s default code is region 1. Play Press the 4PLAY button to start playback. Press the STOP button once on the remote control to stop playback, and press the4PLAY button again to resume playback. Stop Press the ■ STOP button once to stop playback and then press 4PLAY button to resume. Press this button twice to stop playback completely.
­ 30 ­ DVD Player Operation(Continued) Pause Press the ; Pause button once to pause the playback, press it repeatedly to start step­by­step playback, press the4 PLAY button to resume normal playback. Previous and Next Press the : button to go to the next chapter. Press the 9 button once to return to the beginning of the current chapter, press it twice to go to the previous chapter. Fast Playback Press the 8 or 7 button on the remote control to activate fast forward or backward playback. Repeat Use the REPEAT button repeatedly to repeat a chapter, title or all. Menu Normally there is a selecting menu for DVD discs. You can press the red DVDMENU button to enter the menu, and use the direction buttons to highlight an item. Then press the ENTER button to confirm. Title & Chapter Normally there are several titles in a DVD disc, and several chapters (sections) in a title. You can select any title or chapter quickly by entering the relevant number. Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi­language DVD disc you can press the AUDIO button to select different audio languages. Subtitle The DVD player can support multiple kinds of subtitles. When you play a multi­subtitle disc you can press the SUBTITLE button to select different subtitle languages. Various Camera Angles The movies on some DVDs have been recorded from various camera positions. This lets you enjoy the same scene from different perspectives. In this case you’ll usually find a marking on the DVD sleeve. When playing a DVD containing various camera angles the camera symbol appears on the screen. Press the ANGLE button repeatedly until the desired perspective is shown. The picture will be adjusted in 1~2 seconds.
­ 31 ­ DVD Player Operation(Continued) CD Playback The player will play all tracks on a CD disc by default. You can use the 9 and : (PREV/NEXT skip) buttons, or number buttons to select a track. Stop Press the ■ STOP button once to stop playback and then press 4 PLAY button to resume. Press this button twice to stop playback completely. Pause Press the ; PAUSE button to pause the playback and then press the4 PLAY button to resume normal playback. Previous and Next Press the 9 button once to go the beginning of this track. Press twice repeatedly to go the previous track. Press the : button to play from the beginning of the next track. Fast Playback Press the 8 or 7 button on the remote control to activate fast forward or backward playback. Repeat Use the REPEAT button repeatedly to repeat Single, All or to cancel repeat. ◆ Some discs do not support the repeat function. Audio During CD playback, press the AUDIO button on the remote control to select the audio output mode: Mono Left, Mono Right, Mix­Mono and Stereo.
­ 32 ­ DVD Player Operation(Continued) JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD” when they develop your film. Normal Playback Load a JPEG disc in. For JPEG disc, there will be a root menu displayed on the screen. Use the ENTER button and the direction button to select a submenu, and then use the ▲▼ direction button to select the contents. Many discs have other contents besides pictures. For Picture CD disc, it will display the pictures automatically. During playback, press the 9 or : button to select picture. ◆ Many discs have other content besides pictures. Stop Press the < STOP button once to stop playback and return to the preview menu. Press the 4 PLAY button to resume normal playback. Pause Press the ; PAUSE button to pause playback, press the 4PLAY button to resume playback. Repeat During playback, press the REPEAT button repeatedly, and the repeat modes are Shuffle, Random, Single, Repeat One, Repeat All and Repeat Off. Previous and Next During playback, press the 9 or : button to select picture. Menu Press the DVDMENU button once to stop playback and return to the root menu. Picture Rotation This can be used only when the picture is normally displayed. Once another picture is selected, rotation will be cancelled automatically. Use the 34 buttons to rotate the picture. ◆ Some JPEG disc may not support rotating function.
­ 33 ­ USB and SD/MS/MMC Card Function USB and SD/MS/MMC Card Function Preparation: 1. Install the DVD module onto the LCD TV. 2. Connect the unit to the power supply. 3. Press the POWER to turn on the unit. 4. Press the SOURCE button and select DVD, press the ENTER button to shift to DVD mode. 5. Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. Please see the below figure: Ø Make sure that files are stored in the USB and the SD/MS/MMC card before the connection. 6. Press the CARD button to shift among disc playback, USB playback and the SD/MS/MMC playback. The default state is disk playback. Please see the below figure: 00:00 00:00 001/002 BAK JPEG
7. Press the 56 button to select the folder, and press the ENTER button to enter. 8. Press the 56 button to select the desired track. Then press PLAY4 button to start playback. 9. Press the STOP < button to stop playback: if the STOP< button is pressed, the playback will start from the beginning of the current track. Press the 3button to return to the folder menu. NOTE: 1. The screen display will vary from disc to disc. 2. Pull out the USB or SD/MS/MMC card directly after the files are played. Then the unit will be in the state of disc playback again. ­ 34 ­ DVD System Setup Preparations 1. Install the DVD module onto the LCD TV. 2. Connect to the power supply and turn on the unit. 3. Press the SOURCE button and select DVD, press the ENTER button to shift to DVD mode. 4. Press the SETUP button on the remote control to display the settings menu. 5. Press the 34 direction buttons on the remote control to select a category. All the items in the category will appear on the screen. 6. Press the SETUP button again to exit the setup. General Setup Page Press the SETUP button to enter the General setup menu. The screen will display as the following: In the menu, Use the 56 direction buttons to select the desired item. Press the ENTER button to enter the item. Press the 3 button to return. TV Display 1. Press the 56 direction buttons to select TV Display. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select items. 4. Press the ENTER button again to confirm selection and return. Note: “Normal/Ps” and “Normal/Lb” are available only when “HD Mode” is set to “Off”. Angle Mark 1. Press the 56 direction buttons to select Angle Mark. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select On or Off. 4. Press the ENTER button again to confirm selection and return.
­ 35 ­ DVD System Setup(Continued) OSD Lang The item is used to select the OSD language. 1. Press the 56 direction buttons to select OSD Lang. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select items. 4. Press the ENTER button again to confirm selection and return. Screen Saver 1. Press the 56 direction buttons to select Screen Saver. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select On or Off. 4. Press the ENTER button again to confirm selection and to return. Last Memory 1. Press the 56 direction buttons to select Last Memory. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select On or Off. 4. Press the ENTER button again to confirm selection and return. Media Center 1. Press the 56 direction buttons to select Media Center. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select DVD, USB, SD/MMC or MS. 4. Press the ENTER button again to confirm selection and return.
­ 36 ­ DVD System Setup(Continued) Audio Setup Page Press the SETUP button to enter the General setup menu. Then use the 34 direction buttons to select Audio Setup Page, the screen will display as the following: In the menu, Use the 56 direction buttons to select the desired item. Press the ENTER button to enter the item. Press the 3 button to return. Dolby Digital Setup 1. Press the 56 direction buttons to select Dolby Digital. 2. Press the ENTER button to enter the setup, the screen will display as left: 3. In the menu, use the 56 direction buttons to select items. 4. Press the ENTER button to enter the setup. Press the 3 button to return. Dual Mono 1. Press the 56 direction buttons to select Dual Mono. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select items. 4. Press the ENTER button again to confirm selection and return. Dynamic 1. Press the 56 direction buttons to select Dynamic. 2. Press the ENTER button to enter the setup, the screen will display as left: 3. Press the ENTER button to enter. 4. Use the 56 direction buttons to adjust. 5. Press the ENTER button again to confirm setting and return. 6. Press the 3 button to return.
­ 37 ­ DVD System Setup(Continued) Hdcd Setup In the Audio Setup Page, use the 56 direction buttons to select Hdcd Setup, press the ENTER button to enter the setup, the screen will display as the following: 1. In the menu, press the ENTER button to enter the setup. 2. Use the 56 direction buttons to select items. 3. Press the ENTER button again to confirm selection and return. 4. Press the 3 button to return. Video Setup Press the SETUP button to enter the General setup menu. Then use the 34direction buttons to select Video Setup Page, the screen will display as the following: In the menu, Use the 56 direction buttons to select the desired item. Press the ENTER button to enter the item. Press the 3 button to return. HD Mode Use the 56 direction buttons to select HD Mode, press the ENTER button to enter the menu as the following: 1. In the menu, press the ENTER button to enter the setup. 2. Use the 56 direction buttons to select items. 3. Press the ENTER button again to confirm selection and return. 4. Press the 3 button to return.
­ 38 ­ DVD System Setup(Continued) Video Quality Setup Select Quality, press the ENTER button to enter the menu as the following: 1. In the menu, Use the 56 direction buttons to select the desired item. 2. Press the ENTER button to enter the item. 3. Press the 3 button to return. Sharpness 1. Press the 56 direction buttons to select Sharpness. 2. Press the ENTER button to enter the setup. 3. Use the 56 direction buttons to select High, Medium or Low. 4. Press the ENTER button again to confirm selection and return. Brightness 1. Press the 56 direction buttons to select Brightness. 2. Press the ENTER button to enter the setup, the screen will display as left: 3. Use the 34 direction buttons to adjust the level. 4. Press the ENTER button again to confirm setting and return. Contrast 1. Press the 56 direction buttons to select Contrast. 2. Press the ENTER button to enter the setup, the screen will display as left: 3. Use the 34 direction buttons to adjust the level. 4. Press the ENTER button again to confirm setting and return.
­ 39 ­ DVD System Setup(Continued) Preference Setup Press the SETUP button to enter the General setup menu. Then use the 34 direction buttons to select Preference Page, the screen will display as the following: In the menu, Use the 56 direction buttons to select the desired item. Press the ENTER button to enter the item. Press the 3 button to return. Audio 1. Press the 56 direction buttons to select Audio. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the 56 direction buttons to select audio language. 4. Press the ENTER button again to confirm setting and return. Subtitle 1. Press the 56 direction buttons to select Subtitle. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the 56 direction buttons to select subtitle language. 4. Press the ENTER button again to confirm setting and return. Disc Menu 1. Press the 56 direction buttons to select Disc Menu. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the 56 direction buttons to select menu language. 4. Press the ENTER button again to confirm setting and return.
­ 40 ­ DVD System Setup(Continued) Parental DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc. Depending on the disc, you can lock out playback of the disc altogether. 1. Press the 56 direction buttons to select Parental. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the 56 direction buttons to select item. 4. Press the ENTER button to confirm. And use the number buttons to enter the password. The default Password is 3308. 5. Press the ENTER button to confirm setting and return.
Default 1. Press the 56 direction buttons to select Default. 2. Press the ENTER button to select Reset. 3. Press the ENTER button, all the settings will return to the default status. ­ 41 ­ DVD System Setup Password Setup Press the SETUP button to enter the setup menu. Then use the 34direction buttons to select Password Setup Page, the screen will display as the below: In the menu, use the 56 direction buttons to select the desired item. Press the ENTER button to enter the item. Press the 3button to return. Password Mode 1. Press the 56 direction buttons to select Password Mode. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the 56 direction buttons to select On or Off. 4. Press the ENTER button to confirm setting and return. Password Change You can change the password by yourself. 1. Press the 56 direction buttons to select Password. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the ENTER button enter the password change menu. 4. According to the indication in the menu, use the number buttons to input the old password, new password and input new again to confirm. Press the ENTER button to confirm setting and return. The password has been changed successfully. 5. The Default Password is 3308.
­ 42 ­ Troubleshooting SYMPTOM CHECK ITEM The player does not play. Make sure disc is loaded in. Make sure disc is loaded upside down. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at least one hour. There is no sound. Make sure system connection is correct. Make sure the sound setup of DVD disc is correct. Make sure disc is not dirty or warped. Clean or replace the disc. Make sure the speakers are not muted. In the TV mode, set the correct sound mode. LCD is no display Make sure the unit is turned on and the connections are correct. Make sure the power adapter is correctly connected. DVD does not continue to play or plays the same section Make sure disc is not dirty or damaged. repeatedly. Check if the connections with the external AV signal source are correct. There is no picture or picture Correctly set the items in the picture menu. moves up and down. Check if the video type input signal is not corresponding to the unit. Make sure the unit is turned on and in correct video type. Make sure there are no obstructions between the remote control and the player. The remote control does not Make sure the remote control is pointing at the player. work. Make sure batteries are inserted and the polarity is correct. Make sure batteries are not weak. Other Notes: Static or other external interference may cause the player to behave abnormally. In this occurrence, unplug the power­supply cord from the outlet and plug it in again to reset the player. If the problem persists, then please disconnect the power and consult a qualified technician.
­ 43 ­ Specifications TFT­LCD Resolution 1366x768 TFT­LCD Screen Size 31.5 inches Laser Wavelength 780/650 nm Video System NTSC Frequency Response 20Hz~20kHz Audio Signal­to­noise Rate ≥85dB Audio distortion+noise ≤-70dB (1kHz) Channel Separation ≥70dB (1kHz) Dynamic Range ≥80dB (1kHz) ±2.5dB Audio Out Analog Audio Out Out Level: 1.5V± 0.2 1.0 , Load: 10KΩ Video Out Video Out Out Level: 1VP­P±0.1, Load: 75Ω Unbalanced Negative Power AC110~220V,50/60Hz Power Consumption <210W Dimension 803mm × 630mm × 280mm(LXWXD) Ambient Temperature 10~45˚C Weight About 25 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolby” and the double­D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992 ­1997 Dolby Laboratories, Inc. All rights reserved. is a trademark of SRS Labs, Inc. TruSurroundXT technology is incorporated under license from SRS Labs, Inc. 128­7728
­ 44 ­