Audiovox FPE4207HR Flat Panel Television User Manual

LCD TV
FPE4207HR
Operating Manual
Before connecting, operating or adjusting this product, please read the manual completely.
Please keep this manual for future reference.
FOR ASSISTANCE CALL 1-800-619-3848 OR VISIT US AT WWW.AUDIOVOX.COM.
128-8036
Table of Contents
Important Information ......................................................................................................................1
Important Safety Precautions ..........................................................................................................2
Setup ...............................................................................................................................................5
Identification of Controls..................................................................................................................8
Connections...................................................................................................................................12
Basic Operations ...........................................................................................................................18
Memorizing the Channels..............................................................................................................20
Channel Selection .........................................................................................................................22
Setting Picture ...............................................................................................................................23
Setting Picture/Adjusting Image ....................................................................................................24
Setting Sound ...............................................................................................................................25
System Setup................................................................................................................................27
Clock and Timer Setup..................................................................................................................28
Viewing Closed Captions ..............................................................................................................29
Setting Parental Control ................................................................................................................30
PIP/PBP/POP Operations .............................................................................................................34
Electronic Program Guide ............................................................................................................36
Image Adjust for PC/Component Mode ........................................................................................37
Image Adjust for HDMI Mode .......................................................................................................38
Troubleshooting ............................................................................................................................39
Care and Maintenance..................................................................................................................40
Specifications ................................................................................................................................41
Assemble the Speaker ..................................................................................................................42
Programming the Universal Remote Control ................................................................................43
Important Information
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION-To reduce the risk of electric shock, do not
perform any servicing other than that
contained in the operating instructions
unless you are qualified to do so.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental considerations. For disposal or recycling information, please contact
your local authorities or the Electronic Industries Alliance: www.eia.org
FCC STATEMENT
FCC Notice
LCD TV: A CLASS B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not
expressly approved by the manufacturer could cause harmful interference and would void the user's
authority to operate this device.
WARNING: This is a CLASS B product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures to counter interference.
1
Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions
when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD TV product, please read
the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.
3. Heed all warnings---All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Do not use this apparatus near water---for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Do not use immediately after moving from a low temperature to high temperature
environment, as this causes condensation, which may result in fire, electric shock, or
other hazards.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
6. Clean only with dry cloth---Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Ventilation---Do not block any ventilation openings. Install in accordance with the
manufacturer instructions. The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient ventilation
can cause overheating and/or shorten the life of the product. Do not place the product on
a bed, sofa, rug or other similar surface, since they can block ventilation openings. This
product is not designed for built-in installation; do not place the product in an enclosed
place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.
8.Heat sources---Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.Grounding or Polarization---Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
Note: where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
11.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not recommended by the
manufacturer. Use of improper attachments can result in accidents.
2
Important Safety Precautions (continued)
12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table.
Placing the product on an unstable base can cause the product to fall, resulting inserious personal
injuries as well as damage to the product. When mounting the product on a wall, be sure to follow
the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
13. Move Carefully---When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces
can cause the product to fall from the trolley.
Never attempt to move the TV unless the power cord has been disconnected.
14. Lightning---Unplug this apparatus during lightning storms or when unused for long periods of
time.
For added protection for this television equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
15. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
16. Replacement parts---In case the product needs replacement parts, make sure that the service person replacement parts specified by
the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire,
electric shock and/or other danger.
17.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk
of fire or electric shock.
18.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltage flows in the product,
and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.
19.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified
service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the
instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product
indicates that the product needs servicing.
20.Safety checks---Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
21.Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the product according to the method
recommended by the manufacturer. This is a safety feature.
3
Important Safety Precautions (continued)
22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a
lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system. This will prevent damage to the product due to lightning and power line surges. When the unit has to be used with another power
supply voltage, the power cable must be changed. Consult your product dealer. The socket outlet should be installed near the equipment
and easily accessible. Use only the power cord designated by our dealer to ensure safety and EMC. When connecting other products such
as VCRs and personal computers, you should turn off the power of the unit for protection against electric shock.
23.Panel protection---The LCD panel used in this product is made of glass. Therefore, it can break
when the product is dropped or impacted upon by other objects. Be careful not to be injured by
broken glass pieces in case the LCD panel breaks.
24.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active
pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
WARNING: For continued safety, apparatus with class I constructions shall be connected to a mains socket outlet with a protective earthing
connection.
4
Setup
Using the Remote Control
<Use the remote control by pointing it towards the remote sensor window of the set.
Objects between the remote control and sensor window may prevent proper
operation.
Note: This illustration is for reference only. The remote sensor may be in different
locations on different models.
30
30
5m
Cautions regarding use of remote control
<Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not
place in an area with high humidity.
<Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
<The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or
strong lighting. In such a case, change the angle of the lighting or TV set, or operate the remote control closer to
the remote sensor window.
Batteries for the Remote Control
1 Open the battery cover.
2
Insert two size-AA batteries.
<(Place the batteries with their terminals
corresponding to the (+) and (–) indications
in the battery compartment.)
-
+
+
-
3
Replace the cover.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions
below.
<Place batteries with their terminals corresponding to the (+) and (–) indications.
<Different types of batteries have different characteristics. Do not mix batteries of different types.
<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause
old batteries to leak chemicals.
<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If
chemical leakage is found, wipe with a cloth.
<The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
<If the remote control is not used for an extended period of time, remove the batteries from the remote control.
5
Setup
Power connection
Plug into AC outlet.
Household
power outlet
AC cord
Connecting the AC plug to the wall outlet as illustrated.
Note:
<This product should be operated only from the type of power source indicated on the marking label.
<Always unplug the AC cord from power outlet when not using for a long period of time.
Speaker connection
Connect the speaker audio
cable to the external speaker
output jack on the unit
matching the "+" and "-" ends
of the cable with color.
(red)(black)
(red)
(black)
SPEAKER
Note:
1.Unplug the TV set and all connected components before connecting the speakers.
2.The illustration may be different depending on model.
6
Setup
! For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor
antenna is recommended.
! When you enjoy the terrestrial TV programs only, connect the antenna to the AIR input on the TV rear.
! When you enjoy the cable TV programs, connect the cable TV's cable to the CABLE input on the TV rear.
! Select the TV Source (AIR or CABLE) in the CHANNEL SETUP menu and then perform auto channel
search.(See <Memorizing the Channels> section)
Connect to Cable TV System
75 Ohm coaxial cable
TV REAR
VHF antenna
UHF antenna
Mixer
75 Ohm coaxial cable
Notes:
! To obtain optimum quality picture and sound, an antenna, the correct cable (75 Ohm coaxial) and the correct terminating plug
are required.
! If a communal antenna system is used, you may require the correct connection cable and plug between the wall antenna
socket and your television receiver.
! Your local television service centre or dealer may be able to assist you in obtaining the correct antenna system for your
particular area and the accessories required.
! Any matters regarding antenna installation, upgrading of existing systems or accessories required, and the costs incurred, are
your responsibility.
7
Identification of Controls
Main unit (front view)
Top View
Remote Control Sensor
Power Indicator
CH- CH+
VOL- VOL+ MENU INPUT
Power On/standby
Channel Volume Menu
Down/up Down/up
Input Source Select
1. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
2.INPUT
To select the input signal source
3. MENU
Press this button to access the MENU main page.
4. Volume up/down
Press the Volume up/down button to directly increase or decrease the sound volume level.
In OSD Menu, press these buttons to adjust the value or setting of each item
5. Channel up/down
Channel up or down.
In OSD Menu, press these buttons to choose the OSD items.
Note:
POWER ,VOL+/-, CH+/-, MENU and INPUT on the main unit have the same functions as the corresponding
buttons on the remote control.
This operation manual provides a description based on operating functions with the remote control.
8
Identification of Controls (continued)
Main unit (rear view)
HDMI 2
DVI 2 IN
1
HDMI 1
DVI 1 IN
2
3
4
L
AUDIO
AUDIO
S-VIDEO
for software
update only
R
RS-232
5
4
6 7
8
9
10
11
12
1. Speaker output jacks
2. HDMI/DVI inputs 1/2
To connect with those equipments with HDMI or DVI interface, for example, Set-top box or DVD
player.(A HDMI-to-DVI adapter cable is required when you are connecting a DVI-equipped device to this
TV.)
3. VGA interface/Audio in
Connect with those equipments with VGA interface, for example, PC.
Connect the audio jack as well with audio cable.
4. Component inputs 1/2
Connect to the audio and component output jacks of a DVD player or Set-top box.
5. AV inputs 1/2
Receive video/audio signals from external sources such as VCR or DVD player.
6. AV output
Connect to the VCR input jacks to record programs.
7. Headphone jack
8. S/PDIF digital audio out terminal (optical)
9. USB port
For software update only. The user can not operate the unit through the USB port.
10.RS-232 control interface
For service only. The user should not use this interface.
11.AIR antenna input
Connect to outdoor antenna.
12.CABLE input
Connect to a cable TV system.
9
Identification of Controls
Remote Control
1. POWER
Turn the unit on or off
2. To select additional products to be controlled with remote
control
1
Note: This remote control is an universal remote
control. If your remote control does not work
correctly when you operate the unit, please try to
press TV button.
2
3. Direct channel selector/number buttons
Use these number buttons to select channel or input password.
3
5
4
6
8
7
4. Dash(-)
Used to enter a program number for multiple program
channels such as 2-1,2-2, etc.
5. INPUT
To quickly select input source
6. RETURN
To quickly return to the previous channel
9
10
11
7. CH+/To select channels upward or downward
8. VOL+/Used to adjust volume.
12
14
13
9. MUTE
Sound mute
10.MENU
To access the Menu main page
MTS/SAP
ZOOM
CCD
SLEEP
LIST
FAVORITE
AUDIO
PICTURE
11.INFO
To display channel status or signal information
PIP
P.POSITION
SWAP
FREEZE
12.Menu navigation buttons: 5634
56: To move upward or downward in menu operation;
34: To move left or right in menu operation;
To adjust selected menu item in menu operation;
OK button: To confirm or toggle between the settings of the
selected menu item.
13.EXIT
Used to exit the menu
14.GUIDE
To display the on-screen Electronic Program Guide(EPG)
10
Identification of Controls
Remote Control
15. ZOOM
To select screen aspect ratio
16. CCD
To select closed caption mode
17.MTS/SAP
To select STEREO, SAP or MONO (Analog TV mode)
To select audio track (DTV mode)
18.SLEEP
To set Sleep timer
19.LIST
To display program list
20.PICTURE
To select the picture mode
15
17
19
21
23
25
MTS/SAP
ZOOM
CCD
SLEEP
LIST
FAVORITE
AUDIO
PICTURE
PIP
P.POSITION
SWAP
FREEZE
16
18
20
22
24
26
21. FAVORITE
To display favorite program list
22. AUDIO
To select the sound mode
23. PIP
To select PIP/PBP/POP/full screen mode
24. FREEZE
To freeze current picture
25. P.POSITION
To select PIP sub picture position
26.SWAP
To swap the main and sub pictures
(only in PIP or PBP mode)
Note: the buttons without description are not active.
11
Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.
Refer to the user manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Connect an Audio Processor or Hi-Fi (Digital Audio)
For a full Home Theater sound experience,
you must connect your Hi-Fi or Audio
processor to the S/PDIF OUT(Optical) terminal
on the TV rear.
L
S-VIDEO
Note:
The S/PDIF OUT terminal only can output
digital TV program’s audio.
for software
update only
R
RS-232
Optical cable
OR
S/PDIF IN
(Optical)
Audio Processor
HIFi System
Connect a VCR
How to connect:
L
S-VIDEO
Y
W
R
Connect the Audio/Video cables between the Audio (L/R)/Video
jacks on the unit and VCR.
Note: For better video, you can use the S-VIDEO terminal if
your source supports it. S-VIDEO input uses the same circuit
as Video1. S-VIDEO has priority if both connectors are
inserted. Use one or the other.
for software
update only
RS-232
R
Y
W
R
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
1. Turn on your TV, press INPUT button on the remote control to
display INPUT SELECT menu, use5/6to select AV1/SVideo
and then press OK to confirm.
2. Turn on your VCR , insert a videotape and press the Play button.
Audio
cable
Video
cable
Y
To play VCR
S-video
cable
or
W
R
VCR
ANT OUT
AV OUT
VIDEO
L AUDIO R
S - VIDEO
AV IN
VIDEO
L AUDIO R
Rear of the VCR
12
ANT IN
Connections (continued)
Connect a Camcorder
L
S-VIDEO
Y
W
R
for software
update only
RS-232
R
Y
W
R
Video
cable
Y
VIDEO
Audio
cable
W
OUT
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
IN
R
L AUDIO R
Camcorder
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
To playback Camcorder
1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to select
AV2 and then press OK to confirm .
2. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)
3. Insert the tape into the camcorder and press Play button.
Note:
The operations of the camcorder may be different and is dependant on your model. Please read the user manual
of your camcorder to confirm operation.
13
Connections (continued)
HDMI Connection
HDMI 2
DVI 2 IN
HDMI 1
DVI 1 IN
HDMI cable
DVD player or STB with
HDMI interface
How to connect a DVD Player (or STB) using HDMI Connection:
Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the DVD player (or STB).
To playback DVD (or STB)
1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to
select HDMI1(or select HDMI2 if HDMI2 interface is used)and then press OK to confirm.
2. Turn on your DVD player or STB and do relative operations.
Note:
If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI
terminal. Connect the audio cable to the AUDIO terminal of VGA IN on the TV rear.
14
Connections (continued)
Connect a DVD player or Set-Top Box
L
S-VIDEO
HDMI 2
DVI 2 IN
for software
update only
RS-232
HDMI 1
DVI 1 IN
G
W
R
B
R
R
W
white (audio L)
Video
cable
R red (audio R, Pr)
G Green (Y)
Audio
cable
B Blue (Pb)
G
B
R
R
W
DVD player, STB, etc.
COMPONENT
AUDIO
Pb
L AUDIO R
Pr
Y
AV OUT
R AUDIO L
VIDEO
S - VIDEO
DVI
Rear of the DVD, STB
How to connect:
Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr output jacks on the DVD (or
STB). Component color inputs provide luminance and separate color signal.
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD (or STB) .
To playback DVD or STB
1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to select
Component1 (or select Component2 if COMPONENT2 input terminals are used) and then press OK to
confirm .
2. Turn on your DVD or STB and do relative operations.
15
Connections (continued)
Connect a PC
HDMI 2
DVI 2 IN
HDMI 1
DVI 1 IN
Audio
cable
VGA
cable
How to connect:
Connect a VGA cable between the VGA(D-sub) interface on the PC and the VGA input interface on the unit.
Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit.
To Watch the PC screen
1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to
select Analog RGB and then press OK to confirm.
2. Turn on your PC and check for PC system requirements.
3. Adjust the PC screen.
16
Connections (continued)
Connect a VCR (for recording) or external amplifier
for software
update only
L
R
S-VIDEO
Y
RS-232
R
W
Video
cable
Y
Audio
cable
W
Audio
cable
R
R
Y
W
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
R
W
VCR for recording
To Audio inputs
ANT OUT
AV OUT
VIDEO
L AUDIO R
S - VIDEO
ANT IN
AV IN
VIDEO
External Amplifier
L AUDIO R
Rear of the VCR
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
- or Connect the Audio cables between the Audio (L/R) jacks on the unit and external amplifier.
To record program
1. Turn on your TV, select a program you wish to record.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.
To enjoy high-quality sound through an external amplifier
Note:
The operations of the amplifier may be different depending on model. Please read the user manual of your
amplifier to confirm proper operation.
Only analog TV programs, AV1 and AV2 input sources can be output through the AV output jacks.
17
Basic Operations
Turning the Unit On and Off
Turning On
Insert the power cord into the wall outlet.
Press the Power button on the remote control, the unit will be turned on and you will be ready to use its features.
Turning Off
With the power on, press the Power
button on the remote control to turn off.
Note: You can also use the Power button on the control panel on the main unit.
The period between Turn-Off and Turn-On should be more than 3 seconds.
Viewing the Menus and Displays
This unit has a simple, easy-to-use menu system that appears on the screen. This system makes it convenient and
fast to use features on the unit. The unit also lets you display the status of many of your TV features.
Main Menu Overview
Main Menu
PICTURE
Brightness
Contrast
Sharpness
Color
Tint
Backlight
Color Temp
User Color Temp*
IMAGE
ADJUST
Image size
H position
V position
Freeze Image
SYSTEM
SETUP
AUDIO
Headphone volume
Treble
Bass
Balance
Focus window out*
AVC
Language
Screen Saver
Transparency
OSD Time Out
Clock Setup
Source Name Edit
Closed Caption Setup
CHANNEL
SETUP
CONTENT
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
Content Password
Set Password
Password Confirm
Parental Control
Movie Block
Canadian English
Canadian French
TV Blocking
Note:
r The above main menu is illustrated as in TV mode.
r In DTV mode, there is no H position and V position item in IMAGE ADJUST menu.
r Only in DTV mode it will appear Signal Strength bar in CHANNEL SETUP menu.
r The menu items marked with * will appear only on some conditions. In CONTENT menu, ‘Content Password’
menu item will not be displayed after you use the password to access the menu.
Menu navigation
1
2
3
4
With the power on, press the MENU button to display the main menu.
5
Press MENU button to return to the previous level menu.
Press EXIT button to exit the main menu and return to your program.
Press 4or3 button to select menu page.
Press 6 button to enter the menu page.
Within the menu, use 6or 5to select, use3or4 to adjust or enter sub-menu.
In some situations, press OK button to confirm or toggle some settings.
Note:
l To clearly introduce the menu operations , this operation manual provides a description based on operation with
the remote control.
l The illustrations and on-screen displays in this manual are for explanation purposes(some are enlarged, others
cropped) and may vary slightly from the actual ones.
18
Basic Operations
On-screen Menus Language Selection
The menus can be shown on the screen in the selected language.
First select your language.
1
Press MENU and then use 4or3 to display SYSTEM SETUP
menu page, press 6 to enter.
2
Press 6or 5 to select Language item, press 3or4 to select
your desired language.
3
Press EXIT button to return to TV viewing.
SYSTEM SETUP
Language
Screen Saver
Transparency
OSD Time Out
Clock Setup
Source Name Edit
Close Caption Setup
English
OFF
000
010
>>>
>>>
>>>
Selecting Input Source Signal
1
2
3
Press the INPUT button to display INPUT SELECT menu.
Press 6or 5 to select your desired input source, press OK to confirm.
Press INPUT button to clear the screen.
TV --------Select TV signal.
AV1/SVideo------Select signal from AV INPUT1/S-VIDEO terminals.
AV2-------Select signal from AV INPUT2 terminals.
Component1------Select signal from COMPONENT INPUT1 terminals.
Component2------Select signal from COMPONENT INPUT2 terminals.
INPUT SELECT
TV
AV1/SVideo
AV2
Component1
Component2
Analog RGB
HDMI1
HDMI2
Up/Down:Change
OK:Select Input:Exit
Analog RGB-------Select signal from VGA input interface.
HDMI1-------Select signal from HDMI1 input interface.
HDMI2-------Select signal from HDMI2 input interface.
Note:
You may also make use of OSD main menu (CHANNEL SETUP menu) to select the input source.
You can edit source name to your preference (refer to "System Setup" section).
Information Banner
You can press INFO button to call up information banner. The information banner will display current status
information such as channel number or signal source, etc.
In DTV mode, it will display the following information:
- Channel number and name.
- Air or Cable.
- Resolution.
- Current time.
- Caption icon (if closed caption is offered), Clock icon (if timer has been setup) and Lock icon (if blocking scheme is enabled).
- Current program broadcast progress.
- Current program start and end play times.
Note:
Some DTV programs’ information banner may not contain all the above information. It will vary depending on the
broadcaster and your setting.
19
Memorizing the Channels
When the TV powers on for the first time after purchase, the initial auto channel search is invoked.
This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.
Note: Be sure to select the TV input (refer to <Selecting Input Source Signal> section on previous page) before
operation.
Selecting the TV Source
Before your TV can memorize the available channels, you must
specify the type of signal source that is connected to the unit. (i.e., an
antenna or cable system)
1
2
3
In full screen mode, press MENU to display the main menu.
Press 4or3 to display CHANNEL SETUP menu page, press 6
to enter.
Press 6or 5 to select TV Source item, press 3or4 to select
AIR or CABLE.
CHANNEL SETUP
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
WGBHOFF
OFF
>>>
>>>
 Select AIR if using antenna.
 Select CABLE if using cable.
CHANNEL SETUP
Auto Channel Search
If TV Source is set to AIR: highlight Auto Search in the CHANNEL
SETUP menu and then press 4or 3 to begin the auto channel
search, the unit will automatically search for all available TV/DTV
program.
If TV Source is set to CABLE: highlight Auto Search in the
CHANNEL SETUP menu and then press 4or 3, now a Channel
Scan Source window opens up. Use 4or 3to select one of STD,
HRC, IRC and then press OK to begin the auto channel search, the
unit will automatically search for all available CATV/CADTV
program.
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
WGBHOFF
OFF
>>>
>>>
Channel Scan Source
STD
HRC
IRC
Note:
l If you want to stop the auto-search, press MENU button.
l Select one of Cable STD/HRC/IRC according to your local area's cable system, normally please select STD.
Channel Skip
After setting channels into memory, you can skip unnecessary
channels so that only the channels you want to watch are selected
with Channel up/down buttons.
1
2
Navigate to the CHANNEL SETUP menu.
Highlight Current Channel item, use 3or4 to select an
unwanted channel.
CHANNEL SETUP
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
WGBHON
OFF
>>>
>>>
3
Highlight Channel Skip item, use 3or4 to set ON.
4
If you want to skip other unwanted channels, repeat the above
steps.
5
Press EXIT button to exit.
Now when you use CH+/- buttons to cycle among the channels, the skipped channels can not be selected.
20
Memorizing the Channels (continued)
DTV Signal Strength
You can make use of DTV signal strength bar to check how strong
your DTV signal is and whether you need to adjust your antenna or
digital cable input. The stronger the signal strength, the less likely you
are to experience picture degradation.
Navigate to the CHANNEL SETUP menu, at the bottom of the menu
screen the Signal Strength bar is displayed indicating the level and
quality of signal that is received by the unit for the current DTV
channel.
CHANNEL SETUP
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
WGBHOFF
OFF
>>>
>>>
Channel Label Setup
If required, you can give a name to the programs. (Only for analog channels)
1
Navigate to the CHANNEL SETUP menu and highlight Channel
Label.
2
Press OK to enter into channel label editing mode.
Use 3/4 to move the cursor, use 5/6 to select character.
Press MENU to exit the editing mode.
3
CHANNEL SETUP
Press EXIT button to return to TV viewing.
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
ABCDOFF
OFF
>>>
>>>
Note: the names of digital broadcasting channels are automatically
assigned and thus cannot be assigned by users.
Favorite Channel Setup
You can create a favorite channel list into memory as follows:
1
Navigate to the CHANNEL SETUP menu.
2
Highlight Current Channel item, use 3or4to select your favorite
channel.
3
4
5
Highlight Favorite Channel item, use 3or4to select ON.
Repeat the above steps to set more favorite channels (up to 10
channels)
Now a favorite channel list is created, and you can make use of it
to quickly select your favorite channel.
Press FAVORITE button to call up the Favorite channel list, use
5/6to highlight the channel, use OK to select that channel.
21
CHANNEL SETUP
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
WGBHOFF
ON
>>>
>>>
Channel Selection
Information about USA channel numbering
= ATSC PSIP channel has two part channel number:
— Major channel number
— Minor channel number
For example:
Channel: 5-1
Major channel number
Minor channel number
In US, in most situations the major channel number is same for both analog and digital channels (It is equal to
the NTSC channel number for existing broadcasters.)
In US, a minor channel number of zero is used for a broadcaster’s analog channel.
Channel Numbering Example
 Original NTSC Channels for Des Moines:
— 5, 8, 11, 13, 17
 Possible NTSC + ATSC Channels for Des Moines:
— 5-0, 8-0, 11-0, 13-0, 17-0 (channel numbers for existing analog channels)
— 5-1, 5-2, 8-1, 8-2, 8-3,8-4, 13-1 (channel numbers for digital channels)
Channel Selection
Using the Channel up/down buttons (CH+ or CH-)
Press the CH+ or CH- to cycle among available channels found (while the skipped channels can not be selected)
Using the direct select buttons (0-9 and dash buttons)
Press the number buttons (0-9) and the dash (-) button, and the unit goes to that channel.
For example, if you want to select channel 8-3, just key in ‘8’, ‘-’, ‘3’ on the remote control.(Be sure the period of twopress should be within 3 seconds)
Note:
=When you use the number buttons, you can directly select any channel within the channel range .
=In some situations virtual channel numbers have no correspondence to physical frequencies.
=To select an analog channel, you may directly input its major channel number. It is unnecessary to input the minor
channel number of zero.
Using the LAST button
Press this button to switch between the current channel and the last viewed channel.
Using the PROGRAM LIST or FAVORITE LIST
PROGRAM LIST
Digital 2-1 WGBH-SD
Digital 2-2 PBS-HD
Analog 6-0
Analog 7-0
After auto-search, a default program list has been created. You may press LIST
button to call up the PROGRAM LIST, then make use of5/6 to highlight the
channel, and then press OK to select.
FAVORITE LIST
If you have created your favorite program list, you may press FAVORITE button to
call up the FAVORITE LIST, then make use of5/6 to highlight the channel, and
then press OK to select.
Note: 1) In twin window mode, then the above list is only for main window.
2)The OSD illustrations shown on the right are only served as an example and
may differ from the actual ones.
22
Digital
Digital
Analog
Analog
2-1
2-3
12-0
48-0
Setting Picture
Customizing the Picture
1
Press MENU to display the main menu.
PICTURE
2
Press 3or4 to display PICTURE menu page, press 6 to
enter.
3
Within the menu, use 5or6 to select item, use3or4 to adjust.
When Color Temp is set to User, then you can enter into User
Color Temp sub-menu to customize the color temperature.
4
Press EXIT button to return to TV viewing.
Brightness
Contrast
Sharpness
Color
Tint
Backlight
Color Temp
User Color Temp
050
050
007
050
050
Strong
User
>>>
PICTURE
Notes:
The OSD illustrations shown on the right are PICTURE menu in
TV mode.
The menu items may be different when the unit works in
different mode.
Function
Option
Red
Green
Blue
052
050
050
Choice/remarks
Adjusts screen brightness for easier
viewing of dark picture such as night
scenes and black hair.
4: lighter
3: darker
Contrast
Adjusts image contrast.
4: stronger
3: weaker
Sharpness
Adjusts image sharpness and displays a
sharp image.
4: sharper
3: softer
Adjusts color saturation.
4: stronger
3: weaker
Adjusts tint for image.
4: greenish
3: purplish
Brightness
Color
Tint
Backlight
Color
Temperature
Red
User Color
Temperature Green
Blue
Adjusts panel backlight brightness.
Adjusts the color temperature of the image.
Sets to warm to enhance hotter colors such
as red, or set to cool to see less intense
colors with more blue.
Adjusts the color RED of the image.
Adjusts the color GREEN of the image.
Adjusts the color BLUE of the image.
23
Strong/Weak/Medium
Cool/Warm/User
Setting Picture/Adjusting Image
Picture Mode Selection
You can select the picture quality instantly among three preset modes and one user-set mode.
Press the PICTURE button repeatedly to select the desired picture quality. NATURE, SOFT, USER and BRIGHT
can be selected cyclically.
NATURE: Select for a normal picture.
SOFT: Select for a finely detailed picture.
BRIGHT: Select for a bright picture.
USER: The picture quality you set.
Image Size Adjustment
IMAGE ADJUST
You can make use of image size adjustment to choose the aspect
ratio depending on the format of the received signal and your
preference.
Image Size
H Position
V Position
Freeze Image
FILL ALL
050
047
OFF
Press the ZOOM button repeatedly to select the desired image size.
You can also adjust Image size in the IMAGE ADJUST menu.
 NORMAL
Selects the proper picture proportion to match the source’s image.( 4:3 4:3, 16:9  16:9)
 WIDE
This mode stretches the picture horizontally and at the same time still maintains a good aspect ratio at the center of
the screen.
 ZOOM
This mode enlarges the picture in correct proportion.
 FILL ALL
This mode displays a picture at full screen size.
IMAGE ADJUST
Screen Position Adjustment
Image Size
H Position
V Position
Freeze Image
1
Navigate to the IMAGE ADJUST menu.
2
Highlight H Position or V Position item, use 3or4to make
appropriate adjustments.
FILL ALL
050
047
OFF
Note:
 You may perform screen position adjustment only for analog channels. It is unnecessary to adjust screen
position for digital channels.
To Freeze the Picture
Press the FREEZE button to freeze the image on the screen (the video sources still run). Press again to restore.
You can also set Freeze Image to ON in the IMAGE ADJUST menu to freeze the picture. To restore, set it to OFF.
Note:
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the
screen and remain visible.
24
Setting Sound
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the VOL + or VOL- to increase or decrease the volume.
Using the Mute
At any time, you can temporarily cut off the sound using the MUTE button. Press the MUTE button again to restore.
Customizing the sound
1
2
Press MENU to display the main menu.
3
Within the menu, use 5or6 to select item, use3or4 to
adjust.
4
Press EXIT button to return to TV viewing.
AUDIO
Press 3or4 to display AUDIO menu page, press 6 to enter.
Function
Option
Headphone
volume
Headphone volume
Treble
Bass
Balance
Focus window out
AVC
015
050
050
050
Speaker
ON
Choice/Remarks
Adjusts headphone volume.
4: stronger
3: weaker
Treble
Adjusts Treble (high sounds).
4: stronger
3: weaker
Bass
Adjusts Bass (low sounds)
4: stronger
3: weaker
Balance
Adjusts volume balance (left and right volumes).
twin window mode(PIP or PBP), if “speaker” is
selected, then the focus window* sound is output from
speakers while the other window sound is output from
headphone. (Default setting)
Focus window =If “Headphone” is selected, then the focus window
sound is output from headphone while the other
out
(PIP or PBP mode only)
window sound is output from speakers.
=If “Both” is selected, then both speakers and
headphone output focus window sound(as for the
other window, this menu item will be set to “None”
automatically).
4:Higher volume from right speaker.
3:Higher volume from left speaker.
=In
AVC
(auto volume
control)
Each broadcasting station has its own signal conditions,
which can make it necessary to adjust the volume every
time the channel is changed. Turning "AVC" On lets
you automatically adjust the volume of the desired
channel by lowering the sound output when the
modulation singal is high or by raising the sound output
when the modulation signal is low.
Speaker/Headphone/Both
ON/OFF
Notes:
The menu items may be different when the unit works in different mode.
Focus Window Out menu item is available only in twin window mode (PIP or PBP) and either window’s
program is not in Rating Blocked. If “Both” is selected and later on if either window’s program comes into Rating
Blocked, the sound may be mute. To cancel, please exit the Rating Blocked state for the program and then set
this menu item to other proper choice.
Normally the main picture is default focus window. You may select sub picture as focus window by pressing OK
button and a green border will appear on it.
25
Setting Sound
Sound Mode Selection
You can select the sound quality instantly among three preset modes and one user-set mode.
Press the AUDIO button repeatedly to select the desired sound quality. NEWS, USER, MOVIE and MUSIC can be
selected cyclically.
NEWS: Select for a speech or conversation program.
MOVIE: Select for a movie program.
MUSIC: Select for a music program.
USER: The sound quality you set.
Stereo/SAP Broadcasts Setup (only for analog channel)
- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the
stereo program; if the station transmits an additional sound signal as well as the original one.
- Stereo or SAP can be selected only when the TV station transmits these signals.
- Mono sound is automatically received if the broadcast is only in Mono.
- Select Mono if you are having difficulty receiving a stereo signal.
1
2
When viewing analog channel, press the MTS/SAP button to call up the AUDIO
MODE menu.
AUDIO MODE
Mono
Stereo
SAP
Press 5or6to select your desired MTS mode: Mono, Stereo or SAP, then press
OK to confirm.
Note: In multi window mode, Stereo or SAP can be selected only for main picture.
Digital Audio Mode Selection (only in DTV mode)
- The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example,
simultaneous translations of the program into foreign languages).
- The availability of these additional "multitracks" depends upon the program.
1
When viewing digital channel, press the MTS/SAP button to call up the AUDIO
MODE menu.
2
Press5or6to select your desired audio mode option, then press OK to confirm.
Note: In multi window mode, the MTS/SAP button only can be used for
the main picture.
26
AUDIO MODE
1. Audio: eng
2. Audio: fre
(The above OSD is only served
as an illustration. It may be different
in different situation)
System Setup
- You may change systems such as OSD language, screen saver, menu transparency, etc. by making use of
SYSTEM SETUP menu.
1
2
3
Press MENU and then use 3or4 to display SYSTEM SETUP
menu page, press 6 to enter.
Within the menu, use 6or 5to select, use3or4 to adjust or
enter sub-menu.
In some situations, press OK button to confirm or toggle some
settings.
SYSTEM SETUP
Language
Screen Saver
Transparency
OSD Time Out
Clock Setup
English
OFF
000
010
>>>
Source Name Edit
Closed Caption Setup
>>>
>>>
Press EXIT button to return to TV viewing.
Function
Option
Language
Selects on-screen menus language.
Screen Saver
With the Screen Saver function on, the TV will appear “No Signal” character as screen
saver automatically when no signal is being received for some seconds.
Transparency
Adjusts menu transparency.
OSD Time Out
Selects OSD main menu displaying time.
Clock Setup
Making use of Clock Setup sub-menu to setup auto clock, or manual clock, and On/Off timer.
Source Name Edit
Making use of Source Name Edit sub-menu to edit source name for your personal
preference.
Closed Caption Making use of Closed Caption Setup sub-menu to control closed caption, to select caption
Setup
mode. For DTV program, you can customize the captions that appear on the screen.
Source Name Edit
Name the device connected to the input jacks to make your input
source selection easier.
1
Navigate to SYSTEM SETUP menu and highlight Source Name
Edit, use 3or4to enter.
2
Use 5or6to select source you want to edit, then press OK to
enter into source name editing mode.
Use 3/4 to move the cursor, use 5/6 to select character.
Press MENU to exit the editing mode.
Note: TV source can not be editted.
27
SYSTEM SETUP
TV
AV1/SVideo
AV2
Component1
Component2
Analog RGB
HDMI1
HDMI2
TV-------AV1/SVideo
AV2------Component1
Component2
Analog-RGB
HDMI1-----HDMI2------
Clock and Timer Setup
Auto Clock Setup
- With the Auto Clock function ON, the time is set automatically from a digital channel signal.
- The digital channel signal includes information for the current time provided by the broadcasting station.
- Set the clock manually, if the current time is set incorrectly by the auto clock function.
- If you cut off the power supply to the TV, the clock setting you have made will be cleared.
1
2
Highlight Clock Setup item, use3or4 to enter.
3
Highlight Auto Clock and then use 3or4 to turn the Auto Clock
function ON.
4
Highlight Set Time Zone and then use 3or4 to select your
viewing area time zone: Atlantic, New Foundiand, Samoa,
Hawaii, Alaska, Pacific, Mountain, Central, Eastern.
5
If your viewing area uses Observe Daylight Time, set Observe Daylight Time to ON in the menu, otherwise set
it to OFF.
Press MENU and then use 3or4 to display SYSTEM SETUP menu page, press 6 to enter.
SYSTEM SETUP
ON
Auto Clock
Current Time
2006-08-15 08:58 AM
New Foundland
Set Time Zone
ON
Observe Daylight Time
Auto Power On 08:00 PM Today Everyday Disable
Auto Power Off 11:00 PM Today Everyday Disable
Manual Clock Setup
- If current time setting is wrong, reset the clock manually.
- If you cut off the power supply to the TV, the clock setting you have made will be cleared.
1
Navigate to the SYSTEM SETUP - Clock Setup sub-menu,
highlight Auto Clock and then use 3 or 4 to select OFF.
SYSTEM SETUP
OFF
Auto Clock
Current Time
2006-03-15 11:58 AM
New Foundland
Set Time Zone
OFF
Observe Daylight Time
Auto Power On 08:00 PM Today Everyday Disable
Auto Power Off 11:00 PM Today Everyday Disable
2
Press 5or6 to highlight Current Time item and then use 3 or 4
to select either the year, date, or time option. Once selected, use
the number buttons to input and set the year, date and time
options. To select AM or PM, move the cursor to the position and
then use OK to toggle.
3
If your area uses Observe Daylight Time, set Observe Daylight Time to ON in the menu, otherwise set it to OFF.
On/Off Timer Setup
- Auto Power On/Off function operates only if current time has been set.
- The TV must be in standby mode for the Auto Power On to work.
- If you cut off the power, the timer setting will be cleared.
1
Navigate to the SYSTEM SETUP - Clock Setup sub-menu,
highlight Auto Power On or Auto Power Off.
2
Use 3 or 4 to select either the hour or minute option. Once
selected, use the number buttons to input the time. To select AM
or PM, move the cursor to the position and then use OK to toggle.
SYSTEM SETUP
ON
Auto Clock
Current Time
2006-08-15 08:58 AM
New Foundland
Set Time Zone
OFF
Observe Daylight Time
Auto Power On 06:00 PM Today Everyday Disable
Auto Power Off 10:00 PM Today Everyday Disable
l If you want the function to work only today, select Today and then use OK to activate it (displayed in purple).
l If you want the function to work everyday, select Everyday and then use OK to activate it (displayed in purple).
l To cancel On/Off timer function, select Disable and then use OK to activate it (displayed in purple).
3
Press EXIT button to return to TV viewing or press MENU to return to the previous menu.
Sleep timer
- Sleep timer lets you select the amount of time before your TV turns itself off automatically. Note that this setting is
cleared when the TV is turned off.
Press the SLEEP button repeatedly to set sleep timer. To cancel it, press SLEEP button repeatedly to select OFF.
28
Viewing Closed Captions
The unit decodes and displays the closed captions that are broadcast with certain TV shows. These captions are
usually subtitles for the hearing impaired or foreign language translations. All VCRs record the closed caption signal
from television programs, so home-recorded video tapes also provide closed captions. Most prerecorded
commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television
schedule and on the tape’s packaging: .
Note:
The Caption feature only works in TV and AV mode.
Not all the programs and videos will offer closed captioning. Please look for the
In multi window mode, the Caption feature only applies to main picture.
symbol to ensure that captions will be shown.
Closed Caption Control
Press the CCD button repeatedly to select Caption ON, MUTE ON, or
OFF.
- MUTE ON shows the captions (if available on program) when the TV
sound is muted.
SYSTEM SETUP
Closed Caption Control
Analog CC Mode
Digital CC Mode
Closed Caption Option
ON
C1
Service1
>>>
- You can also navigate to SYSTEM SETUP-Closed Caption Setup
sub menu and select Closed Caption Control item, then use 3or4to
select Caption ON, MUTE ON, or OFF .
Analog or Digital Broadcasting System Caption Mode
- Select a caption mode for displaying captioning information if provided on a program.
- Analog caption displays information on the screen usually the program’s dialog.
- Text displays information, usually at the bottom position and is used for a data service, generally not program related.
- Caption/Text,if provided by the broadcaster, would be available for both digital and analog channels.
1
2
Navigate to SYSTEM SETUP menu and highlight Closed Caption
Setup, use 3or4to enter.
Highlight Analog CC Mode or Digital CC Mode, use 3or4to
select caption mode.
SYSTEM SETUP
Closed Caption Control
Analog CC Mode
Digital CC Mode
Closed Caption Option
ON
C1
Service1
>>>
Closed Caption Option
You can customize the digital closed captions that appear on your
screen.
1
Navigate to the SYSTEM SETUP menu and highlight Closed
Caption Setup, use 3or4to enter.
2
Highlight Closed Caption Option, use 3or4to enter.
3
Press 5or6 to select your desired item, and then use 3 or 4 to
customize the Size, Style, etc. to your preference. A preview sample
is provided at the bottom of the menu screen for you to see the
effect.
¨Font Size: Set the size the words will appear in.
¨Style: Select a style for the words.
¨Foreground: Select a color for the text.
¨Background: Select a background color.
¨Background Opacity: Select the opacity for the background color.
¨Edge Effect: Select an edge effect.
29
SYSTEM SETUP
Digital CC Font Size
Digital CC Style
Digital CC Foreground
Digital CC Background
Digital CC Background Opacity
Digital CC Edge Effect
Standard
AUTO
AUTO
AUTO
AUTO
NONE
Sample
Setting Parental Control
Parental Control
This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents
children from watching violent or sexual scenes that may be harmful.
Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the
TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and
content.
Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete
control.
Note:
The Parental Control function works only in some modes (for example, in TV or AV mode).
If blocked program is selected, then the screen will appear “Rating Blocked”.
[1] Movie Rating (MPAA)
Rating
age
based
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG13
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children
under 13.
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC
NO ONE 17 AND UNDER ADMITTED.
X
X Rating is an older rating that is unified with NC-17 but may be encoded in the data of older
movies.
NR
NOT RATED.
Note:
The Movie rating is only age-based.
Example:
“PG13” in the age-based rating is blocked, this will automatically block
the higher ratings “R”, “NC”, “X”,“NR” also.
CONTENT
Set Password
Password Confirm
Parental Control
Movie Block
Canadian English
Canadian French
TV Blocking
30
------Enable
G
PG
PG13
R
NC
E
C
C8+
G
PG
E
G
8+
X
13+ 16+ 18+
>>>
NR
14+ 18+
Setting Parental Control(continued)
[2] TV Rating
Rating
content based
D
L
V
S
FV
Y (All children)
Y7 (Direct to Older Children)
age
based G (General Audience)
PG (Parental Guidance Suggested)
14 (Parents Strongly Cautioned)
MA (Mature Audience Only)
Content Rating can be set but this Rating is not
normally broadcast by TV Station.
Content Rating can be set.
D: Sexually Suggestive Dialog
L: Adult Language
S: Sexual Situation
V: Violence
FV: Fantasy Violence
Note:
Age-based ratings can be modified by the content-based ratings but only in the combinations indicated by an
Choosing lower age-based rating blocks the higher age-based ratings regardless of content ratings settings.
in the table above.
Example:
When Y7 in the age-based rating is set to BLOCK, this will automatically block the
higher ratings: G, PG, 14 and MA. In addition, D, L, S, V and FV in content are
automatically blocked.
CONTENT
TV Blocking
Y
Y7
FV
G
PG
D
L
S
14
D
L
S
V
L
S
V
MA
31
V
Setting Parental Control(continued)
Password Setup
To use the Parental Control function, you first need to set your
password.
CONTENT
Content Password
----
Press MENU and then use 3or4 to display CONTENT menu
1 page,
press 6 to enter.
Enter the password as requested (4-digit, the initial password is
2 1111).
Now the whole CONTENT menu will appear.
CONTENT
3
Highlight Set Password, enter a new password and then confirm
again. Now your new password has been created successfully.
Be sure to write down your password and retain it for future
use.
Set Password
Password Confirm
Parental Control
G
Movie Block
Canadian English E
Canadian French E
TV Blocking
****
****
Done
Disable
PG PG13
C
C8+
G
8+
R
NC
G
PG
X
NR
14+ 18+
13+ 16+ 18+
>>>
Parental Control Setup
1 Use the password to access CONTENT menu.
Highlight Parental Control, use 3or4 to select Enable to activate
2the
blocking scheme you set up.
If you want to disable the blocking scheme you set up, select
Disable.
CONTENT
Set Password
Password Confirm
Parental Control
Movie Block
Canadian English
Canadian French
TV Blocking
------Enable
G
PG PG13
E
C
C8+
E
G
8+
R
NC
G
PG
X
NR
14+ 18+
13+ 16+ 18+
>>>
MPAA Rating Setup
1 Use the password to access CONTENT menu.
2 Highlight Movie Block, use 3or4to select your desired rating,
then use OK to either block the rating (a lock will appear) or
unblock (the lock will disappear) .
For example, when “PG13” in the age-based rating is blocked, this
will automatically block the higher ratings “R”, “NC”, “X”, “NR” also.
CONTENT
Set Password
Password Confirm
Parental Control
Movie Block
Canadian English
Canadian French
TV Blocking
------Enable
G
PG
PG13
R
NC
E
C
C8+
G
PG
E
G
8+
X
NR
14+ 18+
13+ 16+ 18+
>>>
TV Rating Setup
1 Use the password to access CONTENT menu.
2 Highlight TV Blocking, use 3or4to enter.
3
Within the menu, use 5,6,3or4to select, use OK to either
block (a lock will appear) or unblock (the lock will disappear) .
CONTENT
TV Blocking
Y
Y7
For example, when Y7 in the age-based rating is set to BLOCK, this
will automatically block the higher ratings: G, PG, 14 and MA. In
addition, D, L, S, V and FV in content are automatically blocked.
Press EXIT button to return to TV viewing or press MENU to
4 return
to the previous menu.
32
FV
G
PG
D
L
S
14
D
L
S
V
L
S
V
MA
V
Setting Parental Control(continued)
Canadian English Rating Setup
1 Use the password to access CONTENT menu.
2 Highlight Canadian English, use 3or4to select your desired
rating, then use OK to either block the rating (a lock will appear) or
unblock (the lock will disappear) .
3 Press EXIT button to return to TV viewing.
CONTENT
Set Password
Password Confirm
Parental Control
Movie Block
Canadian English
Canadian French
TV Blocking
------Enable
G
PG PG13
E
C
C8+
E
G
8+
R
NC
X
NR
G
PG
14+
18+
13+ 16+ 18+
>>>
CANADIAN ENGLISH RATING CHART
E
Exempt - Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
C
Programming intended for children under age 8. No offensive language, nudity or sexual content.
C8+
Programming generally considered acceptable for children 8 years and over. No profanity, nudity
or sexual content.
G
General programming, suitable for all audiences.
PG
Parental Guidance suggested. Some material may not be suitable for children.
14+
Programming contains themes or content which may not be suitable for viewers under the age of 14.
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.
18+
Intended for viewers 18 years and older and might contain depictions of violence.
Canadian French Rating Setup
1 Use the password to access CONTENT menu.
2 Highlight Canadian French, use 3or4to select your desired
rating, then use OK to either block the rating (a lock will appear) or
unblock (the lock will disappear) .
3 Press EXIT button to return to TV viewing.
CONTENT
Set Password
Password Confirm
Parental Control
Movie Block
Canadian English
Canadian French
TV Blocking
------Enable
G
PG PG13
E
C
C8+
E
G
8+
R
NC
G
PG
X
NR
14+ 18+
13+ 16+ 18+
>>>
CANADIAN FRENCH RATING CHART
E
G
8+
13+
16+
18+
Exempt - Exempt programming.
General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal
or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad audience but contains light
or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one or
more sufficiently violent scenes to affect them. Adult supervisionstrongly suggested.
Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or
intense violence.
Only for adult viewing.Could contain frequent violent scenes and extreme violence.
Information about RRT5 (Rating Region Table-Region5) criteria rating
If the broadcasting program uses RRT5 criteria rating in accordance with the FCC Rules, this unit can
automatically download this kind of rating and provide to user to setup.
Its operation procedures are same to TV rating setup. Use password to access CONTENT menu, at the last line
of the menu screen will appear this kind of rating, use 3or4to access its first level sub-menu. In this level menu,
particular rating types and Reset function are provided. Use menu navigation buttons to select and access
second level sub-menu to setup the blocking scheme. Or you may select and activate Reset function at the first
level sub-menu to clear the RRTrating. (If this rating is still broadcast by TV station, the unit will download it again).
Note: the actual menu options of this rating will vary depending on the broadcaster.
33
PIP/PBP/POP Operations
Watching PIP/PBP/POP Picture
Press the PIP button (the period of two-press should be within 3 seconds) to select different multi window modes.
With each press of PIP button, the window mode will cycle among PIP, PBP, POP and full screen mode.
Note: If the period of two-press is more than 3 seconds and when current screen is in multi window mode, press PIP
button then the screen will directly switch to full screen mode.
Full Screen
In Full Screen mode, only one window appears.
Full Screen
PIP (picture-in-picture)
PIP lets you view two different pictures on your TV screen at the same
time. One picture will be large, and the other picture will show a
smaller image.
Note: the main picture source can be any one kind except HDMI,
while the sub window only can display analog TV channel or AV
program.
Main Picture
Sub
Picture
PBP (picture-by-picture)
PBP mode splits the screen into two, allowing two pictures to be shown
on the TV screen at the same time. Each picture is given half the screen.
Note: the main picture source can be any one kind except HDMI,
while the other window only can display analog TV channel or AV
program.
Main Picture
POP (picture-out-of-picture)
Use POP to scan the programs of all the memorized channels one-byone on the three mini windows (while the main window remains the
current program).
Note: the main picture source can be any one kind except HDMI,
while the three mini windows only can display analog TV channels.
Sub
Picture
1
2
Scanning
Picture
Main Picture
3
34
PIP/PBP/POP Operations
Swapping the PIP/PBP Picture
Use the SWAP button to swap the main and sub pictures.
Note:
Only when the main picture displays analog TV channel or AV program, the SWAP function can work.
Selecting the PIP sub picture position
Main Picture
In PIP mode, press the P.POSITION button to select a different position
on the screen for the sub picture.
Sub Picture
Selecting focus window
In multi window mode, you can press OK button to select main or sub picture as focus window and a green border will
appear on it. You may apply many operations to the focus window such as channel select, volume control, input
source select, etc.
In POP mode, you can press OK button to select three mini windows as focus window (1,2,3 will appear for some
time). Before 1,2, 3 disappears from the screen you can directly key in 1 or 2 or 3 on the remote control to choose the
relevant program to be displayed on the main window.
Note:
! Normally main picture is default focus window.
! Many but not all operations can be applied to focus window.
35
Electronic Program Guide
Electronic Program Guide
Your TV has an “Electronic Program Guide” to help you to navigate through all the possible viewing options. The
EPG supplies information, such as program lists, start and end times of all available channels. In addition, detailed
information about the program is often available in the EPG. (The availability and the amount of program details will
vary depending on the broadcaster.)
Operation
1 To display the Electronic Program Guide, press the GUIDE button. An example of an EPG window is given below.
To exit, press GUIDE button again.
2 Press OK button to select active window. Once a window is activated, a green border will appear on it and you
may apply operations to it.
If bottom half window of EPG is activated,
3 press
3 or 4button to select your desired
channel (once selected, its relevant program
information such as program list, start and
end times of all available programs will be
displayed). Press 5or6to select different
program at this channel (once selected, the
top left window will display detailed
information(if available) about this program) .
C
D
WGBH-SD
Rating: NONE
12:29 pm FRI ang 15,2003
Two people begin new jobs with the goal of
being fired by 3 p.m. The same day, with a
$25,000 prize to the person who is fired
closest to the deadline.
E
A
Status: Acquiring detailed information complete
2-1 2-2 2-10
End
Start
8:30 am 9:30 am
5:30 pm 6:30 pm
B
Program Name
WGBH DTV Broadcast Signal
WGBH DTV Broadcast Signal
4 If additional and detailed information about
the selected program appears on the top
right window, you may press OK button to
highlight it (a green border will appear on it),
then use 5or6to scroll page (if required) to
view more information.
A
All available sub channels within an ATSC channel will be displayed.
B
Displays current selected sub-channel's information such as program list, start
and end times of all available programs.
C
Program preview of current selected sub-channel.
D
Shows current time, date, current program's station and rating, etc.
E
Displays additional and detailed information about particular program (The
availability of additional details depends on the broadcaster).
Note:
! The EPG will only work when you are receiving digital channels.
! To enable EPG to work properly, you must set Auto Clock function to ON.
36
Image Adjust for PC/Component Mode
- Be sure to select the correct source (Analog RGB or Component) before operation.
Image Adjust
1 Press MENU and then use 3or4 to display IMAGE ADJUST menu page, press 6 to enter.
2 Within the menu, use 5or6 to select, use 3or4 to adjust.
3 Press EXIT button to exit.
IMAGE ADJUST
Image size
H position
V position
Frequency
Phase
Freeze Image
H width
V width
IMAGE ADJUST
Image size
H position
V position
Frequency
Phase
Freeze Image
Auto Adjust
FILL ALL
050
047
000
000
OFF
005
005
(IMAGE ADJUST menu in Component mode)
Option
FILL ALL
050
047
000
000
OFF
>>>
(IMAGE ADJUST menu in PC mode)
Function
Selects a desired image size (aspect ratio).
Image size
The choice may be different in different mode.(refer to <Setting Picture/Adjusting
Image > section in TV mode for details.)
Note: you may directly press ZOOM button on the remote control to select.
H position
Move the image on the screen left/right.
V position
Move the image on the screen up/down
Frequency
Adjusts the sample frequency.
Phase
Improves the focussing of stable image.
Select "ON" to freeze the image on the screen. Select "OFF" to reactivate the image.
Freeze Image
H width
(component mode only)
V width
(component mode only)
Auto Adjust
(PC mode only)
Note: you may directly press FREEZE button on the remote control to freeze the image,
press again to restore.
Adjusts the horizontal width of the image.
Adjusts the vertical width of the image.
Highlight "Auto Adjust" item and then use 3or4 button to start auto adjustment. The
set will automatically adjust the image such as frequency, position setting, etc.
37
Image Adjust for HDMI Mode
- Be sure to select the HDMI source before operation.
Image Adjust
IMAGE ADJUST
1
2
Press MENU and then use 3or4 to display IMAGE ADJUST
menu page, press 6 to enter.
Image size
Freeze Image
Colorspace
FILL ALL
OFF
YCbCr
Within the menu, use 5or6 to select, use 3or4 to adjust.
3 Press EXIT button to exit.
Option
Function
Selects a desired image size (aspect ratio).
Image size
(Refer to <Setting Picture/Adjusting Image> section in TV mode for details.)
Note: you may directly press ZOOM button on the remote control to select.
When 1080i or 1080p signal is received, then this item can not be adjusted.
Select "ON" to freeze the image on the screen. Select "OFF" to reactivate the image.
Freeze Image
Colorspace
Note: you may directly press FREEZE button on the remote control to freeze the image,
press again to restore.
When the unit converts DVI signal to HDMI signal, sometimes abnormal color will
appear, if this situation occurs, you can try to adjust this item.
38
Troubleshooting
Before calling for repair service, check the following items for possible remedies to an
encountered symptom.
Symptoms
Check item
=Check that the
No power
AC power cord is plugged into the mains socket.
=Unplug
the power cord, wait for 60 seconds. Then re-insert plug into the mains
socket and turn on the unit again.
=Check video connections at the rear of the unit to see if it is properly connected to
the unit.
No picture
=Adjust the contrast and brightness settings.
=Select a correct input.
=Is a non-compatible signal being input?
Good picture but no sound
Good sound but poor color
=Increase the VOLUME.
=Check that the unit is not muted.
= Adjust the contrast, color and brightness settings.
=Sometimes,
Poor picture
poor picture quality occurs when an activated S-VHS camera or
camcorder is connected while another activated peripheral is connected. In this case,
switch off one of the peripherals.
=Check whether the room is too bright.
=This may be caused by electrical interference (e.g. hairdryer, nearby neon lights,
Horizontal dotted line
etc.).
=Turn off the equipment.
=This remote control is an universal remote control. If the remote control does not
work correctly when operating the monitor, try pressing the TV button.
Remote operation fails.
=Check whether the batteries are working. Replace if necessary.
=Clean the remote control sensor lens on the unit.
=Do not use the remote control under strong or fluorescent lighting.
=The batteries should be inserted with polarity (+, -) aligned.
Snowy picture and noise
=Check the A/V connections.
No stable or not
synchronized VGA picture
=Check if you have selected the correct VGA mode in your PC.
No output from one
of the speakers
=Adjust Balance in the AUDIO (SOUND) menu.
=Method 1:
Control buttons do not work.
Press POWER button on the main unit and wait for 3 seconds, then the
main unit will be turned off. Continue to wait for some time and then turn on the unit
again. (Recommended because all the setting you have made will not be cleared.)
=Method
2: unplug the power cord, wait for a few seconds. Then re-plug the power
cord and turn on the unit again.(But all the setting you have made will be cleared.)
+ Do not use in hot and cold rooms (locations)
• When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: 0°C to +50°C Working temperature: 5°C to +40°C )
Note:
If your problem is not solved, turn your unit off and then on again.
Never attempt to repair a defective TV yourself.
39
Care and Maintenance
LCD Display panel information
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image
Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of
irreversible LCD panel deterioration can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Note:
The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and
as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended
periods of time.
Cleaning and Maintenance
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent
solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that came with the cloth carefully.
40
Specifications
250W (Max.)
80.3(lb)
Unit Dimensions (WxHxD) (inch)
42.4 x 33.9 x 13.6
C
1-125
CADTV
DTV
1-135
2-69
TV system:
41
Assemble the Speaker
Safety precautions:
1.Thoroughly read this instruction before setup and follow the steps below precisely.
2.Very carefully handle the unit during setup and consult authorized service personnel to ensure
successful installation.
3.The table or other platform to be placed with the Display should be put a soft cushion on and be able to
support the weight as well as be stable.
4.Make sure not to handle the Speaker when moving the Display.
Assembling the Speaker
1.Remove the screw covers carefully, then unscrew 4 screws from inside.
Screw covers
2.Assemble the speaker to the unit through the speaker-fixed connectors using the above
screws(step1) and tighten securely, then install the two Speaker Connecting Covers to the
corresponding place.
Speaker Connecting Covers
Screws
Note:
1. Unplug the TV and all connected components before assembling and connecting the Speaker.
2.Connect the speaker audio cable between the speaker output jacks on the unit and Speaker matching the
“+” and “-” ends of the cable with color.
3. The appearance of the unit may differ from the actual one.
4. Design and specifications are subject to change without notice.
42
Programming your Remote Control
Introduction
Your remote lets you control four devices with one easy-to-use, compact unit. After installing batteries, you can program the remote to
control your VCR or DVD, Cable or Satellite Receivers, Amplifier or Tuner, and Auxiliary devices. To do so, follow the instructions in
“Programming a Device”. For best results, please read and follow all the remaining instructions. Keep this guide for future reference.
A Quick Look at Programming a Device
To control VCR or DVD, Cable or Satellite Receivers, Amplifier or Tuner, and Auxiliary devices, follow these steps. Before proceeding, find
the codes for the devices you want to program in “Manufacturer's Codes” in next following pages and write them down or highlight them.
NOTE: To program a DVD Player, portable DVD player, or mobile DVD player, use the DVD key.
1.
2.
3.
4.
5.
6.
Turn on the device (for example, DVD player) and, if needed, load media (for example, a DVD).
Press a device key (VCR/DVD, CBL/ SAT, or AUX).
Press and hold SET until the red LED blinks twice; then release.
Enter the first five-digit code for your device. The LED blinks once as each digit is entered. If the code is correct, the LED blinks
twice.
 NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.
Aim the remote at the device and press Power. The device should turn off. If it does not, repeat steps 3 to 5, trying each code for
your brand until you find one that works. If you cannot find a code that works, see “Searching for Your Code”.
Repeat steps 1 to 5 for the other devices you want to control. For future reference, write down each working device code below:
AUX Code:
CBL Code:
CD Code:
DVD Code:
SAT Code:
TNR Code:
VCR Code:
7.
Press set to save and exit
Searching for your Code
If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your
code:
1. Press a device key once.
2. Press and hold SET until the red LED blinks twice; then release.
3. Enter 9-9-1, then the device group number (0= Cable, 2= VCR, 3= Audio). The LED blinks twice.
4. Aim the remote at the device and press Power. The remote sends IR codes from its library to the selected device, starting with
the most popular code first. If the device responds, go to step 7.
5. If the device does not respond, press CH+. The remote will try the next code. Continue until the device responds.
 NOTE: Press CH- to try the previous code.
6. To search for other device codes, repeat steps 1 to 5.
7. Press SET to save and exit.
Checking the Codes
If you have set up the remote using the procedure in “Searching for Your Code”, you may need to find out which four-digit code is operating
your equipment.
For example, to find out which code is assigned to your DVD:
1. Press DVD once.
2. Press and hold SET until the red LED blinks twice; then release.
3. Enter 9-9-0. The LED blinks twice.
4. To view the code for the first digit, press 1. Count the LED blinks (for example, three blinks = 3), and write down the number in the
appropriate code listing in step 6 under “Programming a Device”.
 NOTE: If a code digit is 0, the LED does not blink.
5. Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth
digit.
6. To check for other device codes, repeat steps 1 to 5, substituting the device key for DVD.
43
Changing Volume Lock
The remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may
change the Volume Lock setting to Global Volume Lock so that one device's volume will control volume in all other modes. After that, you
can perform Individual Volume Unlock on a selected device to set its volume control for independent operation or Global Volume Unlock to
remove all volume locking.
Locking Volume Control to One Mode (Global Volume Lock)
1.
2.
Press and hold SET until the red LED blinks twice; then release.
Enter 9-9-3 and then press the mode key for the device you want to control volume (for example, DVD). The LED blinks twice.
Now when you press VOL+, VOL-, or Mute, the selected device (for example, DVD) will control the volume regardless of the
current mode.
Unlocking All Volume Control (Restoring Global Unlock)
1. Press and hold SET until the red LED blinks twice; then release.
2. Enter 9-9-3 and then press VOL+. The LED blinks four times.
Volume is now independently controlled for all programmed devices.
Unlocking a Single Device's Volume Control
1. Press a device key (VCR/DVD, CBL/ SAT, or AUX).
2. Press and hold SET until the red LED blinks twice; then release.
3. Enter 9-9-3 and then press VOL-. The LED blinks four times.
Volume is now independently controlled for the selected devices.
Troubleshooting
PROBLEM: LED does not blink when you press a key.
SOLUTION: Replace with new batteries.
PROBLEM: LED blinks when you press a key, but device does not respond.
SOLUTION: Make sure the remote is aimed at your device and is not more than 15 feet away.
PROBLEM: LED blinks one long blink.
SOLUTION: An entry error has occurred (for example, wrong key). Try entry sequence again.
PROBLEM: Remote does not control devices or commands are not working properly.
SOLUTION: Try all listed codes for the device. Make sure the device operates with an infrared remote control.
PROBLEM: No volume on a device.
SOLUTION: See “Changing Volume Lock”.
44
MANUFACTURER'S CODES
Set Codes for Audio Amplifiers
Bose
GE
JVC
Marantz
Nakamichi
NEC
Optimus
Realistic
Sansui
Shure
Sony
Soundesign
Victor
Wards
Yamaha
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
Set Codes for Audio Amp/Tuners
ADC
Aiwa
Anam
Audiotronic
Bose
Capetronic
Carver
Coby
Denon
Fonmix
Glory Horse
Harman/Kardon
Hitachi
Inkel
Integra
JBL
JVC
Kenwood
KLH
Magnavox
Marantz
MCS
Onkyo
Optimus
Panasonic
Philips
Pioneer
Proscan
Qisheng
Quasar
RadioShack
RCA
Sharper Image
Silsonic
Sony
Soundesign
Stereophonics
Sunfire
Teac
Technics
Thorens
Victor
Wards
Yamaha
30531
31405, 31243, 30121
31609, 31074
31189
31229
30531
31189
31263
31360, 31142, 30904
31360
31263
30110
31273
30027
30135
30110
30074, 31263
31313, 31570, 30027
31428
31189, 31269, 30531
31189, 31269, 30039
30039
30842, 30135
31023, 30670, 30531, 31074
31518, 30039
31189, 31269
31023, 30150, 30014, 30630, 30531
31254
31609
30039
31263
31023, 31609, 31254, 30531, 31074
31263
30176
31258, 31759
30670
31023
31313
31074, 31267
31308, 31518, 30039
31189
30074
30014
30176, 31276, 31176
45
Set Codes for Cable Converters
ABC
Americast
Bell & Howell
Bell South
Clearmaster
ClearMax
Coolmax
Daeryung
Digi
Director
Dumont
Gehua
General Instrument
GoldStar
Hamlin
Hitachi
Jerrold
KNC
LG
Memorex
Motorola
MultiVision
Pace
Panasonic
Panther
Paragon
Philips
Pioneer
Pulsar
Quasar
RadioShack
Regal
Runco
Samsung
Scientific Atlanta
Sony
Starcom
Supercable
Supermax
Tocom
Torx
Toshiba
Trans PX
Tristar
TS
V2
Viewmaster
Vision
Vortex View
Zenith
00003, 00008, 00014
00899
00014
00899
00883
00883
00883
01877, 00877, 00477, 00008
00637
00476
00637
00476
00476, 00810, 00276, 00003, 00014
00144
00009, 00273
00014
00476, 00810, 00276, 00003, 00012, 00014
00008
00144
00000
00476, 00810, 00276, 01254, 01376
00012
01877, 00237
00000, 00008, 00107
00637
00000
00317, 01305
01877, 00877, 00144, 00533
00000
00000
00883
00279, 00273
00000
00000, 00144
01877, 00877, 00477, 00008
01006
00003, 00014
00276
00883
00012
00003
00000
00276
00883
00003
00883
00883
00883
00883
00000, 00525, 00899
Set Codes for CD Players
Aiwa
Burmester
California Audio Labs
Carver
Denon
DKK
DMX Electronics
Dynamic Bass
Fisher
Garrard
Genexxa
Harman/Kardon
30157
30420
30029
30157, 30179
30873
30000
30157
30179
30179
30420
30032
30157, 30173
46
Hitachi
Integra
JVC
Kenwood
Krell
Linn
Magnavox
Marantz
MCS
Miro
Mission
MTC
NSM
Onkyo
Optimus
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
QED
Quad
Quasar
RadioShack
RCA
Realistic
Rotel
SAE
Sansui
Sanyo
SAST
Sharp
Silsonic
Sonic Frontiers
Sony
Soundesign
TAG McLaren
Tascam
Teac
Technics
Victor
Wards
Yamaha
Zonda
30032
30101
30072
30826, 30626, 30028, 30037, 30036, 30190
30157
30157
30157
30626, 30029, 30157
30029
30000
30157
30420
30157
30868, 30101
31063, 30000, 30032, 30037, 30420, 30179, 31075, 30145
30029
30420
30626, 30157
31063, 31062, 30032
30157
30157
30157
30157
30029
31075
31062, 30032, 30420, 30179, 30053
30420, 30179
30157, 30420
30157
30157
30179
30157
30861, 30037
30888, 30036
30157
30490, 30000, 30100
30145
30157
30420
30420
30029
30072
30157, 30053
30888, 30036
30157
Set Codes for DVD Players
Aiwa
Akai
Allegro
Apex Digital
Blaupunkt
Blue Parade
Broksonic
Changhong
CineVision
Coby
Curtis Mathes
CyberHome
Daewoo
Denon
DVD2000
Emerson
20641, 21912
20770
20869
20672, 20717, 20797, 21061, 20796, 21056, 21937, 20794, 21020, 21915
20717
20571
20695
20627, 21061
20869
21086
21087
21024, 21023, 21129, 20816, 21117
20833, 21172, 20869
20490
20521
20591, 20675
47
Enterprise
Fisher
Funai
Gateway
GE
Go Video
Greenhill
Harman/Kardon
Hitachi
Hiteker
Initial
Integra
JBL
JVC
Kenwood
KLH
Koss
Lasonic
LG
Liquid Video
Lite-On
Loewe
Magnavox
Marantz
Memorex
Microsoft
Mintek
Mitsubishi
Nesa
Norcent
Onkyo
Oritron
Panasonic
Philips
Pioneer
Polaroid
Polk Audio
Portland
Proscan
Qwestar
RCA
Rio
Rotel
Sampo
Samsung
Sansui
Sanyo
Sharp
Sharper Image
Sherwood
Shinco
Shinsonic
Sonic Blue
Sony
SVA
Sylvania
Symphonic
Teac
Technics
Theta Digital
Toshiba
Urban Concepts
Xbox
Yamaha
Zenith
20591
21919
20675
21158, 21073
20522, 20717
20744, 20833, 21099, 20783, 21075, 20869, 21730
20717
20582, 20702
20573, 20664, 21919
20672
20717
20627, 21924
20702
20558, 20623, 20867
20490, 20534
20717, 21020, 21149
20651, 21980
20798
20591, 20869, 20801
21980
21158, 21058
20511
20503, 20539, 21976, 21914, 20675
20539
20695
20522
20717
21521, 20521
20717
21003
20503, 20627, 21924, 20792
20651, 21980
20490, 21762, 21990
20503, 20539, 20646, 21914
20525, 20571
21086, 21061
20539
20770
20522
20651
20522, 20571, 20717, 20822
20869
20623
20752, 20698
20490, 20573, 21932, 21075, 20820
20695
20695
20630, 20752
21117
20770
20717
20533
20869, 21099
20533, 20864, 21033, 21904, 21903
20717
20675
20675
20717, 21984, 20809
20490
20571
20503, 20695
20503
20522
20490, 20539, 20545
20503, 20591, 20869
48
Set Codes for Satellite Receivers
AlphaStar
Chaparral
Crossdigital
DirecTV
Dish Network System
Dishpro
Echostar
Expressvu
GE
General Instrument
GOI
Goodmans
Hisense
Hitachi
HTS
Hughes Network Systems
I-Lo
JVC
LG
Magnavox
Memorex
Mitsubishi
Motorola
NEC
Next Level
Panasonic
Paysat
Philips
Proscan
Proton
RadioShack
RCA
Samsung
Sanyo
SKY
Sony
Star Choice
Tivo
Toshiba
UltimateTV
Uniden
US Digital
USDTV
Voom
Zenith
00772
00216
01109
00392, 00566, 00639, 01142, 00247, 00749, 01749, 00724, 00819, 01856, 01076, 01109, 00099, 01392,
01640, 01442, 01414, 01108
01005, 00775, 01505
01005, 00775, 01505
01005, 00775, 01505
00775
00566
00869
00775
01246
01535
00819, 00222, 01250
00775
01142, 00749, 01749, 01442
01535
00775
01414, 01226
00724, 00722
00724
00749
00869
01270
00869
00247, 00701
00724
01142, 00749, 01749, 00724, 01076, 00722, 00099, 01442
00392, 00566
01535
00869
00392, 00566, 00855, 00143, 01392
01276, 01109, 01108
01219
00856
00639, 01640
00869
01142, 01442
00749, 01749, 00790, 01285
01640, 01392
00724, 00722
01535
01535
00869
00856, 01856
49
Set Codes for VCRs
ABS
Admiral
Aiko
Aiwa
Alienware
America Action
American High
Amoisonic
Anam
Anam National
Asha
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
Canon
Carver
CCE
Changhong
Citizen
Colt
Craig
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
Denon
DirecTV
Durabrand
Electrohome
Electrophonic
Emerex
Emerson
Fisher
Fuji
Fujitsu
Gateway
GE
General
Go Video
GoldStar
Haojie
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
Hitachi
Howard Computers
HP
Hughes Network Systems
iBUYPOWER
JVC
KEC
Kenwood
KLH
Kodak
Kolin
LG
Logik
LXI
Magnavox
Magnin
Marantz
Marta
21972
20048, 20209
20278
20037, 20479
21972
20278
20035
20479
20162, 20037, 20240, 20278
20162
20240
20037, 20278
20240
20104
20184, 20121, 20209, 20002, 20479
20037
20035
20081
20072, 20278
20048, 20081
20037, 20278
20072
20037, 20047, 20240, 20072
20060, 20035, 20162
20240
21972
20045, 20104, 20278
21972
20042
20739
20039, 20038
20037
20037
20032
20035, 20037, 20184, 20240, 20045, 20121, 20043, 20209, 20002, 20278, 20479
20047, 20104
20035, 20033
20045
21972
20060, 20035, 20240
20045
20432
20037, 20209, 20038, 20225
20240
20081, 20038
20072
21972
20047
20037, 20042, 20055
21972
21972
20042, 20739
21972
20045, 20067
20037, 20278
20067, 20038
20072
20035, 20037
20043
20037, 20045, 20042, 20209, 20038
20072
20037
20035, 20039, 20081
20240
20035, 20081
20037
50
Matsushita
Media Center PC
MEI
Memorex
MGA
MGN Technology
Microsoft
Mind
Minolta
Mitsubishi
Motorola
MTC
Multitech
NEC
Newave
Nikko
Noblex
Northgate
Olympus
Optimus
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Profitronic
Proscan
Protec
Pulsar
Qisheng
Quasar
Radix
Randex
RCA
Realistic
ReplayTV
Runco
Sampo
Samsung
Sanky
Sansui
Sanyo
Scott
Sears
Sharp
Shintom
Shogun
Singer
Sonic Blue
Sony
STS
Sylvania
Systemax
Tagar Systems
Tashiko
Tatung
Technics
Teco
Teknika
Tivo
TMK
Toshiba
20035, 20162
21972
20035
20035, 20162, 20037, 20048, 20039, 20047, 20240, 20104, 20209, 20479
20240, 20043
20240
21972
21972
20042
20067, 20043
20035, 20048
20240
20072
20035, 20037, 20048, 20104, 20067, 20038
20037
20037
20240
21972
20035
21062, 20162, 20037, 20048, 20104, 20432
20184, 20209, 20002, 20479
21062, 20035, 20162, 20616, 20225
20035, 20037, 20240, 20042, 20038
20042
20035, 20479
20035, 20081, 20739, 20618
20037
20042, 20067
20081
20240
20060
20072
20039
20060
20035, 20162
20037
20037
20060, 20035, 20240, 20042, 20880
20035, 20037, 20048, 20047, 20104
20616
20039
20037, 20048
20240, 20045, 20432
20048, 20039
20067, 20209, 20479
20047, 20240, 20104
20184, 20045, 20121, 20043
20035, 20037, 20047, 20042, 20104
20048, 20209
20072
20240
20072
20616
20035, 20032, 20033, 20636, 21972
20042
20035, 20081, 20043
21972
21972
20037
20045, 20067
20035, 20162
20035, 20037, 20048, 20038
20035, 20037
20636, 20618, 21503, 20739
20240
20045, 20042, 20067, 20043, 21503, 21008, 21972
51
Totevision
Touch
Unitech
Vector
Vector Research
Victor
Video Concepts
Videomagic
Videosonic
Viewsonic
Wards
White Westinghouse
XR-1000
Yamaha
Zenith
ZT Group
20037, 20240
21972
20240
20045
20038
20067
20045
20037
20240
21972
20060, 20035, 20048, 20047, 20081, 20240, 20042, 20072
20209, 20072
20035, 20072
20038
20039, 20033, 20209, 20479
21972
CARE




Keep the remote dry. If it gets wet, wipe it dry immediately.
Use and store the unit only in normal temperature environments.
Handle the remote gently and carefully. Don't drop it.
Wipe the remote with a damp cloth to keep it looking like new.
52
PRINTED ON
RECYCLED PAPER
604.L42FE187-00
Ver 1.0