Audiovox P-87S Stereo System User Manual

P-87S
HIGH POWER DETACHABLE FACE
ELECTRONICALLY-TUNED AM/FM/MPX RADIO
WITH AUTO-REVERSE CASSETTE PLAYER,
CD CHANGER CONTROLS AND QUARTZ CLOCK
OWNER'S
MANUAL
INDEX
Operating Instructions......................................................................
Setting the Clock ..............................................................................
Frequency Step Switch ....................................................................
CD Changer Controls .......................................................................
CD Changer Error Codes .................................................................
Specifications ...................................................................................
Care and Maintenance .....................................................................
Warranty .............................................................................................
Page
1-7
8
8
9 - 10
10
11
12
13
OPERATING INSTRUCTIONS
1
volume level is now set in the memory. If the unit is turned off with
the volume higher than the memory setting, the unit will return to
the memory setting when turned back on. If, however, the unit is
turned off with the volume lower than the memory setting, the unit
will return to the lower setting when turned back on.
ON-OFF POWER BUTTON (PWR)
VOLUME LEVEL MEMORY
Press this button momentarily to turn the unit on or off. The unit
will also turn on automatically when a cassette is inserted if the
ignition switch is “on”.
This button is also used to set the memory for the volume level
which will be recalled when the unit is turned on. To set the
volume memory, turn the unit on and adjust the volume using the
Volume Control to the level which you wish to be recalled when
the unit is turned on. Then, press the On-Off button and hold it for
approximately 2 seconds. The unit will turn off and the selected
2
VOLUME LEVEL CONTROL
To increase the volume level, press the + side of the button. The
volume will increase and the level will be shown on the display
panel from a minimum of 0 to a maximum of 80. To increase the
volume quickly, keep the button pressed. To decrease the
volume level, press the – side of the button. Keep the button
2
-1-
pressed to decrease the volume quickly. The display will
automatically return to the priority indication 5 seconds after the
last volume adjustment or when another function is activated.
This button is also used in conjunction with the Select button
to adjust the bass, treble, balance, and fader levels as described
in , ,
and .
presses of the button will change the display to clock time and
then CD disc/track number.
Additional momentary presses of the button will set the unit for
bass adjustment (level number above “BAS” will flash on display
panel), treble (level number above “TRE” will flash), balance (“BAL”
on display), fader (“FAD”) or volume (level number). The display
will automatically return to the normal indication 5 seconds after
the last adjustment is made or when another function is activated.
This unit can be set so that the radio frequency/cassette/disc
indication (factory setting) or clock time will appear on the display
panel as the priority setting. To change the priority setting, press
and hold the Select button for 2 seconds until the display changes
to the next indication. That indication will now be the priority
setting and the display will automatically return to that indication
after any radio, cassette, disc or audio function is displayed.
3
456
3
7
SELECT BUTTON (SEL)
DISPLAY CALL
DISPLAY PRIORITY SELECTOR
IGNITION-OFF CLOCK CALL (CLK)
This button is used to select the audio function (volume, bass,
treble, balance, or fade) to be adjusted using the Level Control ,
as well as the indication (time or frequency/cassette/disc) shown
on the display panel. Momentary presses of the button will change
the display from radio frequency/cassette/disc indication to clock
time. After 5 seconds, the display will automatically return to the
priority setting.
During CD changer operation, a momentary press of the button
will change the display from disc/track number to CD track elapsed
time. Another press of the button will change to clock time.
After 5 seconds, the display will automatically return to disc/track
number if set to CD track display priority. If the unit has been set
to clock time display priority, momentary presses of the button
will change the display to CD disc/track number and then CD
elapsed time. After 5 seconds, it will change back to clock time
display. If the unit has been set to elapsed time priority, momentary
2
NOTE: When changing the display priority setting, release the
button as soon as the display changes (approximately
2 seconds). Holding the button in for too long will put the
unit into time setting mode (flashing time display). See
section on “Setting the Clock”.
To check the time with the vehicle ignition switch in the “off”
position, momentarily press the Select button. The display will
illuminate and show the time and then automatically shut off after
5 seconds.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the Select button
so that the level number above the “BAS”
3
-2-
display to a maximum of “0L R9” (full right). Adjusting the
balance toward the left will increase the number on the left side of
the display to a maximum of “9L R0” (full left). The display will
automatically return to the priority indication 5 seconds after the
last adjustment or when another function is activated.
indication is flashing. Within 5 seconds of choosing the Bass
mode, press the + or – side of the button of the Level control to
adjust the bass response as desired. The bass level will be shown
on the display panel from a minimum of –7 to a maximum of 7 (0 is
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
2
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button so that the “FAD” indication
appears on the display panel. Within 5 seconds of choosing the
Fader mode, press the + or the – side of the button of the Level
Control to adjust the front-rear speaker levels as desired. When
the level of the front and rear speakers is equal, “0F R0” will be
shown on the display panel. Adjusting the fader toward the front
speakers will increase the number on the left side of the display
to a maximum of “9F R0” (full front). Adjusting the fader toward the
rear speakers will increase the number on the right side of the
display to a maximum of “0F R9” (full rear). The display will automatically return to the priority indication 5 seconds after the last
adjustment or when another function is activated.
5
3
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
so that the level number above the “TRE”
the Select button
indication is flashing. Within 5 seconds of choosing the Treble
mode, press the + or – side of the button of the Level control to
adjust the treble response as desired. The treble level will be
shown on the display panel from a minimum of –7 to a maximum
of 7 (0 is flat response). The display will automatically return to
the normal indication 5 seconds after the last adjustment or when
another function is activated.
3
2
2
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button so that the “BAL” indication
appears on the display panel. Within 5 seconds of choosing the
Balance mode, press the + side of the button of the Level Control
to adjust the stereo balance to the left channel speakers or
the – side of the button to adjust it to the right channel speakers.
When the volume level between the right and left channels is equal,
“0L R0” will be shown on the display panel. Adjusting the balance
toward the right will increase the number on the right side of the
8
3
LOUDNESS CONTOUR (LD)
Pressing this button for longer than 2 seconds will activate the
Loudness Contour as indicated by “LOUD” on the display panel.
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the
characteristics of human hearing. Pressing the button again for
longer than 2 seconds will deactivate the feature and “LOUD” will
disappear from the display panel.
2
-3-
step higher. Similarly, each tap of the – button will tune one
frequency step lower. To manually tune in a station, tap the button
of the appropriate direction until the desired frequency is reached.
Pressing either button for longer than 0.5 seconds and then
releasing will activate the Automatic Seek Tuning function. The
radio will seek the next available station and stop at that frequency.
The Seek function can be stopped by pressing the button again or
activating any other tuning function.
Pressing either button for longer than 0.5 seconds will cause the
radio to continue tuning rapidly in the selected direction until the
button is released, at which point it will seek to the next available
station.
NOTE: Momentary presses of the button will change the radio
sensitivity in Seek and Scan Tuning modes from Local to
Distant and back again as described in section .
9
bn
AM/FM BAND SELECTOR (BND)
AUTO-STORE TUNING (AS)
MODE SELECTOR
During radio operation, each momentary press of this button will
change the radio band. The indication “AM”, “FMI”, or “FMII” will
appear on the display panel according to your selection.
Pressing and holding the button for longer than 2 seconds will
activate the Auto-Store Tuning function which will automatically
scan the AM or FMII bands and enter strong stations into the
pre-set memory positions for that band. If you have already set
the pre-set memories on the AM or FMII bands to your favorite
stations, activating the Auto-Store feature will erase those stations
and enter new ones. This feature is most useful when traveling in
a new area where you are not familiar with the local stations.
Momentary presses of this button are also used to select the
audio source or mode in play. During tape play, it can be used to
change to radio mode without ejecting the cassette ( IN indication
will remain on display panel to show that a cassette is still loaded in
the unit). Similarly, it can be used to go back to tape mode from
radio play. If an optional CD changer is connected to the unit, this
button is also used to select CD changer operation as described in .
bl
bm
AUTOMATIC SCAN TUNING
During radio operation, press this button to scan the stations on
the band in use, stopping at each one for 5 seconds before
continuing to the next station (the frequency on the display panel
will flash during Scan mode operation). When a desired station is
reached, press the button again to stop the Scan function and
remain on the selected frequency. Scan mode will also be
canceled by activating any other tuning function.
bn
LOCAL/DISTANT SELECTOR (LO/DX)
This feature is used to select the strength of the signals at which
the radio will stop during Automatic Seek and Scan Tuning.
Momentarily pressing the button will select the Local setting
(“LOC” will appear on the display panel) and only strong (local)
stations will be received. Momentarily pressing the button again
will select the Distant setting (“LOC” will disappear from the
cq
MANUAL UP/DOWN TUNING
AUTOMATIC SEEK TUNING
Each time the + button is tapped, the radio will tune one frequency
-4-
bq
display panel) and the radio will stop at a wider range of signals,
including weaker (more distant) stations.
CASSETTE DOOR
Hold the cassette with the exposed tape edge to the right and
insert it into the cassette door until the soft-load mechanism draws
the cassette in and play begins (“CASS” and IN will appear
on the display panel). When the cassette reaches the end on the
side of the tape being played, the unit will automatically change
direction of play as shown by the “1” or “2” indication on the display panel and play of the other side of the cassette will begin.
NOTE: Pressing this button for longer than 2 seconds will activate
or deactivate the Loudness Contour feature as described
in section .
bo
8
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the
following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual
Up/Down or Automatic Seek Tuning Controls .
3. Press the pre-set button to be set and continue to hold it in.
After approximately 2 seconds, the display will flash and the
volume will be momentarily muted indicating that the station
is now set into that pre-set memory position. The station
can now be recalled at any time by pressing that button.
4. Repeat the above procedure for the remaining 5 pre-sets on
that band and for the other 2 bands on the unit.
NOTE: Observe cassette operation Cautions in the Care and
Maintenance section of this manual.
br
bl
FAST-FORWARD BUTTON (FF)
FAST-FORWARD MUSIC SEARCH SYSTEM
A momentary press of this button will activate the Fast-Forward
Music Search System function (“MSS”, moving bars and flashing
“1” will appear on the display panel). The unit will automatically
fast-forward to the beginning of the next selection and begin play.
To search for a particular selection, tap the button until the
respective number (up to 9) flashes on the display panel. For
example, to move forward 3 selections from the present point on
the tape, tap the button 3 times until the number “3” flashes on
the display panel. The unit will fast-forward 3 selections and
begin play. To stop Music Search function at any point, press
the Program Selector button
or tap the Rewind button
to
reduce the number of the selection being searched.
Pressing and holding the Fast-Forward button for longer than 0.5
seconds will cause the tape to continually move in the forward
direction of play (moving bars will appear on the display panel).
bp
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency,
time, and activated functions.
bt
NOTE: It is a characteristic of LCD panels that, if subjected to
cold temperatures for an extended period of time, they
may take longer to illuminate than under normal conditions.
In addition, the visibility of the numbers on the LCD may slightly
decrease. The LCD read-out will return to normal when the
temperature increases to a normal range.
-5-
bs
To stop Fast-Forward movement, press the Program Selector
button
and normal play will resume.
resume when the cassette is ejected, depending on which mode
was in operation prior to cassette play.
REWIND BUTTON (REW)
REWIND MUSIC SEARCH SYSTEM
A momentary press of this button will activate the Rewind Music
Search System function (“MSS”, moving bars and flashing “1” will
appear on the display panel). The unit will automatically rewind to
the beginning of the present selection and begin play. To search
for a particular selection, tap the button until the respective
number (up to 9) flashes on the display panel. For example, to
move backward 3 selections from the present point on the tape
(including the present selection), tap the button 3 times until the
number “3” flashes on the display panel. The unit will rewind
3 selections and begin play. To stop Music Search function at
or tap the
any point, press the Program Selector button
Fast-Forward button
to reduce the number of the selection
being searched.
Pressing and holding the Rewind button for longer than 0.5 seconds
will cause the tape to continually move in the reverse direction of
play (moving bars will appear on the display panel). To stop
Rewind movement, press the Program Selector button
and
normal play will resume.
NOTE: Never leave a cassette engaged in the player when not in
use. Doing so can cause damage to the cassette and/or
mechanism of the unit. Always press the eject button
and remove the cassette before removing the detachable
front panel.
bs
bt
br
cl
RADIO MONITOR (RM)
This feature allows you to listen to the radio section of the unit
during Fast-Forward or Rewind of the cassette. To activate the
function, press the Radio Monitor button so that the “RM”
indication appears on the display panel. Deactivate the function
by pressing the button again so that “RM” disappears from the
display panel.
bt
cm
TAPE REPEAT PLAY
When the Repeat button is pressed during tape play, the “RPT”
indication will appear on the display panel and play of the present
tape selection will be repeated until the Repeat Play mode is
canceled by pressing the button again (“RPT” will disappear from
the display panel). Repeat Play mode will also be canceled by
activating the Fast-Forward , Rewind , Program Selector ,
or Scan
functions.
bt
bt
cn
PROGRAM SELECTOR (PROG)
Press this button to manually reverse tape direction and play the
other side (program) of the cassette. The change of direction will
be shown by the “1” or “2” indication on the display panel.
bu
EJECT BUTTON ( )
Tape playback is stopped and the cassette is ejected by pressing
this button. Radio or CD changer operation will automatically
-6-
co
br
bs
bt
BLANK SKIP (BS)
When the Blank Skip button is pressed during tape play (“B.SKIP”
will appear on the display panel), the tape will automatically fastforward to the beginning of the next selection whenever a blank
section of longer than 8 seconds on the tape is detected. To turn
the Blank Skip feature off, press the button again (“B.SKIP” will
disappear from the display panel).
co
4. When taking the front panel with you, please use the supplied
carrying case to protect the panel from dirt and damage. Make
sure there is no dust or dirt on the electrical terminals on the
back of the panel as this could cause intermittent operation
or other malfunctions.
TAPE SCAN
When the Scan button is pressed during tape play, the “SCAN”
indication will appear on the display panel and the first 10 seconds
of each selection on the tape will be played in order (“CASS” will
flash on the display panel as the selections are played). When a
desired selection is reached, press the Scan button again and
play of that selection will continue (“SCAN” will disappear from the
display panel). The Scan mode will also be canceled by activating
the Fast-Forward , Rewind , Program Selector , or Repeat
Play
functions.
cp
cm
br
bs
DETACHING THE FRONT PANEL
bt
FRONT PANEL RELEASE BUTTON (REL)
This button is used to release the mechanism that holds the front
panel to the chassis. To detach the front panel, press the button
so that the left side of the panel is released. Grasp the released
side and pull it off of the chassis. To re-attach the panel, position
the right side of the panel in place first and then press the left side
of the panel until the mechanism locks it into place.
Release Button
ATTACHING THE FRONT PANEL
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is right-side-up when attaching it to
the chassis as it cannot be attached when up-side-down.
2. Do not press very hard on the front panel when attaching it to
the chassis. No more than light to moderate pressure should
be needed.
3. When attaching the front panel, make sure the right side is
correctly engaged before pressing the left side to lock it into
position.
Engage right side first
-7-
SETTING THE CLOCK
1. Turn the radio on so that the radio frequency or clock time is shown on the display
panel.
approximately 4 seconds until the time display
2. Press and hold the Select button
begins flashing.
3. While the time display is still flashing, press the Manual Down Tuning button (–) to
adjust the minutes and the Manual Up Tuning button (+) to adjust the hours to the
correct time.
again
4. When the correct time is shown on the display panel, press the Select button
to return to the normal display.
3
3
FREQUENCY STEP SWITCH
This unit is supplied pre-set at the factory for reception of North American radio stations
(10 KHz. channel spacing on AM, 200 KHz. spacing on FM). Use in other areas of the
world may require different channel spacing. A switch on the bottom of the chassis allows
selection of 9 KHz. AM/50 KHz. FM channel spacing. With the 16-pin power connector
un-plugged from the socket at the rear of the chassis, slide the switch to the appropriate
position using a small screwdriver blade.
-8-
CD CHANGER CONTROLS
will be selected.
Built into this unit are controls to operate an optional CD changer.
Please check with your Prestige car stereo specialist for
recommendations of the models that will work with this unit.
Adjustment of the audio functions (volume, tone, balance, and fader)
for the CD changer operate in the same manner as they do for radio
and cassette play. The following controls will operate the CD changer
when it is installed and connected to this unit. Refer to the owner’s
manual included with the CD changer for instructions on the
installation and correct loading and use of the CD magazine.
cu CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue button
(+) to advance rapidly in the forward direction or the Review button
(–) to advance rapidly in the backward direction. During either
function, the elapsed time within each track will automatically be
shown on the display panel.
dl PAUSE/PLAY SELECTOR ( II
cq MODE SELECTOR
)
During disc play, press this button to temporarily stop play of the
disc (“PAUS” indication will flash on the display panel). Press the
button again to resume play of the disc from the point at which it
was stopped. Pause mode will also be canceled by activating the
Disc Select & , Track Select , or Cue/Review
functions.
With the CD changer connected to the unit, this button is used to
select CD changer operation. To choose CD mode, press the button
until the indication “CdC” appears on the display panel. The
display will then change to indicate the disc number and track
number. Press the Mode button again to change back to radio or
tape operation.
cr cs
These buttons are used to select the desired disc for play. To
advance to a higher number disc, press the “D+” button . To
return to a lower number disc, press the “D–” button . The number
of the selected disc in play will be shown on the display panel.
cr
When the Repeat button is pressed, play of the selected track will
be continually repeated (“RPT” will appear on the display panel and
“TRK” will flash). The Track Repeat mode will be canceled by
pressing the Repeat button again (“RPT” will disappear from the
display panel and “TRK” will stop flashing) or by activating the Shuffle
or Scan
functions
When the Repeat button is pressed and held longer than 2 seconds,
play of the selected disc will be continually repeated (“RPT” will
appear on the display panel and “DISC” will flash). The Disc
Repeat mode will be canceled by pressing the Repeat button again
(“RPT” will disappear from the display panel and “DISC” will stop
flashing) or by activating the Shuffle
or Scan
functions.
dn
ct TRACK SELECT
These buttons are used to quickly select the beginning of a
particular track. With each momentary tap of the Forward Track
Select button (+), the next higher track number will be selected as
shown on the display panel. Similarly, with each momentary tap of
the Backward Track Select button (–), the next lower track number
cu
dm TRACK/DISC REPEAT (RPT)
cr & cs DISC SELECT (D+) (D–)
cs
ct
-9-
do
dn
do
dn TRACK/DISC SHUFFLE (SHF)
When the Shuffle button is pressed, the tracks on the disc will be
played in a random, shuffled order (“SHF” will appear on the display
panel and “TRK” will flash). The Track Select button
will also
select tracks in the shuffled order instead of the normal progression.
When all tracks on the disc have been played in shuffled order, the
next disc will be selected in normal order and its tracks played in
shuffled order. The Track Shuffle mode will be canceled by pressing
the Shuffle button again (“SHF” will disappear from the display panel
and “TRK” will stop flashing) or by activating the Repeat or Scan
functions.
When the Shuffle button is pressed and held longer than 2 seconds,
both the discs and the tracks will be played in a random, shuffled
order (“SHF” will appear on the display panel and “DISC” will flash).
After all tracks on the disc have been played, the changer will
select a new disc in shuffled order and play its tracks in shuffled
order. The Disc Shuffle mode will be canceled by pressing the
Shuffle button again (“SHF” will disappear from the display panel
or
and “DISC” will stop flashing) or by activating the Repeat
Scan
functions.
cu
dm
do
dm
do
do TRACK/DISC SCAN (SCAN)
When the Scan button is pressed and held longer than 2 seconds,
the first 10 seconds of the first track on each disc will be played
(“SCAN” will appear on the display panel and the disc number will
flash). When a desired disc is reached, press the Scan button
again and play of the disc will continue (“SCAN” will disappear from
the display panel and the disc number will stop flashing). The Disc
Scan mode will also be canceled by activating the Disc Select
& , Track Select , Repeat , or Shuffle
functions.
cs
dm
dn
cr cs
dm
dn
cr
CD CHANGER ERROR CODES
If a problem should develop while operating the CD changer, the
following error codes may appear on the display panel.
EJ:
Indicates that there is no magazine loaded in the CD changer.
no_d:
Indicates that there are no discs loaded in the CD
magazine in the changer.
E-01, etc.: Indicates an error in the laser reading the disc in slot
#1 of the magazine (E-02 for disc in slot #2, etc.) Eject
the magazine, remove the indicated disc and make sure
it is clean, undamaged, and loaded correctly (label side
up or down as per CD changer owner’s manual). Clean
and re-load the disc(s) as appropriate and check for
proper operation or try another disc.
When the Scan button is pressed, the first 10 seconds of each
track on the disc will be played in order (“SCAN” will appear on the
display panel and the track number will flash). When a desired E-95:
track is reached, press the Scan button again and play of that
track will continue (“SCAN” will disappear from the display panel E-99:
and the track number will stop flashing). The Track Scan mode will
also be canceled by activating the Disc Select
&
, Track
Select , Repeat , or Shuffle
functions.
-10-
ct
ct
Indicates a communication error between the radio and CD
changer. Check the connections and cable of the changer.
Indicates excessive temperature conditions at the CD
changer. The error code will go off and play will resume
when the temperature at the changer returns to a
normal range.
SPECIFICATIONS
Size:
Operating Voltage:
Output Power:
Output Wiring:
Output Impedance:
Low-Level Output:
Tuning Range:
Sensitivity:
FM Stereo Separation:
Tape Frequency Response:
Tape S/N Ratio:
Wow & Flutter:
7" W x 2" H x 6 1/8" D
178mm x 50mm x 155mm
12 volts DC, negative ground
160 watts maximum
(40 watts x 4 channels)
Floating-ground type designed for 4 speaker use.
The amplifiers in this unit are NOT designed for use
with 2 speakers.
RCA low-level outputs (4 channels).
Compatible with 4-8 ohm speakers
4.0 volts (4,000 mv.)
AM: 530 - 1,710 KHz. (10 KHz. step)
531 - 1,602 KHz. ( 9 KHz. step)
FM: 87.5 - 107.9 MHz. (200 KHz. step)
87.5 - 108.0 MHz. ( 50 KHz. step)
AM: 20 uv
FM: 1.5 uv
30 dB
30-15,000 Hz.
50 dB
0.15% WRMS
*Specifications are subject to change without notice.
-11-
CARE AND MAINTENANCE
The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual
for future reference of the many features found in this unit.
As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep
it in good working condition. The following simple care and maintenance suggestions should be followed to prevent
malfunctions of the cassette system.
CASSETTE CARE:
1. Purchase a cassette cleaning kit from your local retail store. Use it! At least every 20 to 30 hours of operation you
must clean the cassette mechanism. A dirty cassette player will have a poor sound.
2. Do not use cassettes that exceed 45 minutes of play on each side.
3. Do not insert a cassette that appears to be broken, twisted or dirty or with loose or torn labels on it.
4. Always keep your cassettes away from direct sunlight or exposure to sub-freezing conditions. If a cassette is cold, allow
it to warm up before use.
5. Do not keep a cassette in the player when not in use.
6. Before inserting a cassette in the player, check that the tape is tightly wound on the reels. Take up any excess slack
using a pencil to turn the drive hub in the cassette (see diagram below).
-12-
12 / 24 MONTH LIMITED WARRANTY
Applies to automotive radios, radio/tape players, radio/CD players,
CD changers, power amplifiers, equalizers and accessories.
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,
under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such
defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated
bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below.
The warranty period will be extended to 24 months from the date of original purchase if the product is installed by an authorized Prestige Audio
dealer. To claim warranty service during this extended period, the bill of sale must specify that the product was installed by an authorized
Prestige Audio dealer.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred
for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code
label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5543
-13-
© 2000 Audiovox Corporation, Hauppauge, N.Y. 11788
Printed in Singapore
128-5674