Owner`s manual | Audix TVD6040 TV DVD Combo User Manual

TVD6040
COMBINED 21" TV AND DVD PLAYER
OWNER'S MANUAL
TV
+
Please read this manual carefully
before using this TV set and keep it
for future reference.
CONTENTS
Basic operation
Warning and cautions.............................................................2
Installation............................................................................3
Aerial connection..................................................................3
Preparation of the remotecontrol............................................3
Function buttons and external sockets..................................4
Front panel of the TV set.......................................................4
Rear panel of the TV set.........................................................4
Using the remote control........................................................5
Basic operation
Switching on/off the TV set ....................................................6
Watching TV .........................................................................7
Watching TV program...........................................................7
Program swap and auto scan functions...................................8
Searching channel.................................................................9
Full automatic mode............................................................9
Semi-automatic search.......................................................10
Manual fine tune.................................................................11
Program skip .....................................................................12
Convenient picture and sound control functions..................13
Multiple picture modes ......................................................13
Black stretch and noise reduce............................................14
Mute , Select the language and Fade function.......................15
Time functions.....................................................................16
Clock setting and timer on/off functions..............................16
Sleep timer and program preset .........................................17
Setup function ....................................................................18
Screen saver and childlock functions....................................18
AVL and calendar functions ................................................19
Position exchange function.................................................20
Teletext................................................................................21
DVD Operation
Basic Playback....................................................................23
Advanced Playback..............................................................24
Special Function Playback...................................................25
DVD System Setup...............................................................27
Playable Discs.....................................................................31
Disc Protection and DVD Characteristics.............................32
Others
Connection to the external audio and video equipment........33
Troubleshooting guide.........................................................34
Specifications......................................................................35
Warning and cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. Do not place the TV set near rain or
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TV set must only
be used in dry in
door locations.
2. In order to prolong the live of the
product, please use in a well
ventilated location.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
3. Don't place the
TV set in direct
sunlight or near a
heat source.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
Cleaning the tube
If the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleaner or abrasive cloths.
2
Installation
Aerial Connection
If the picture is not clear or snowy, we recommend that you use an outdoor
aerial.In different places, the suitable antenna type and position are different.
300
twin-lead cable
Antenna adapter
(Not supplied)
COAXIAL
75 coaxial cable
Aerial input
75 standard
coaxial type
Plug
(Not supplied)
AC power socket
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
Preparation for the remote control
Battery installation
Remove the battery cover.
Insert two size AAA batteries matching
the +/-polarities of the battery to the +/marks inside the battery compartment.
Tips for remote operation
When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the
batteries to prevent leakage.
Do not throw the batteries into fire.
Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble
the remote control.
Function Buttons and External Sockets
Front panel the TV set
VIDEO L-AUDIO-R
Video
R/LAudio
Power Switch
Power Indicator
TV/DVD MENU
Play the DVD
V-
V+
P-
P+
Stop the DVD
The DVD Player
Menu
Signal Receiver
TV/DVD Switching
Open/close the DVD
Channel Position up/down
Volume up/ down
Rear panel of the TV set
Digital audio coaxial output terminal
COAXIAL
DVD EXT
COAXIAL
TV EXT
DVD SCART Terminal
TV SCART Terminal
Switching on/ off the TV set
This section explains the use of the power button and remote handset
to turn your unit on and off.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will light.
2 If the indicator is lighting in red, press the button
on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly
through pressing the channel buttons on the TV set
(Child Lock must be turned off).
4
AUTO
BG
2 If you want to exchange to standby status,
please press down the button
on the remote
control.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the TV set.
Auto switch-off function
If transmissions are finished for the day, the
Automatic Power Off feature will put the TV to
standby automatically. The Automatic Power
Off feature will not operate in AV mode or
when the background is set to off (see page
18).
Watching TV
You can watch TV program in a preset channel.
Watching TV program
How to select TV program
Select the desired program
1 Using "Program number" buttons
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
2 Using the P+/- buttons
Press the P+ button to increase channel number.
Press the P- button to decrease channel number.
Select the desired sound
Press the V-/+ buttons on the remote or the front of the TV
set to adjust the volume level. The range is 0~100. When the
volume buttons are pressed the volume level is displayed
automatically on the TV screen.
TUNE
COLOUR
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
AUTO
VHFL
OFF
0
If picture colour is abnormal
Use the P+/- buttons to select Colour then the V-/+
buttons to change between Auto, PAL, NTSC and
NTSC443. Press the EXIT button to save the setting.
Watching TV continued
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs in
memory with "OFF" skip status (each channel will last about 2 seconds).
Program swap and auto scan functions
Program swap
1 Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
18
AUTO
BG
8
AUTO
BG
18
AUTO
BG
Auto program scan
1 Press the SCAN button to
scan through all the memorized
TV channels. The scan will
pause for about 2 seconds on
each channel.
1
AUTO
BG
SCAN
2
AUTO
BG
SCAN
3
AUTO
BG
SCAN
1
AUTO
BG
SCAN
2 If you want to stop the function
during auto scanning, simply
press the SCAN button again.
Searching channel
This TV set has three methods to set the channels, which are respectively full
automatic, semi- automatic and manual fine tune.
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the TV set to set channel.
Full automatic mode
1 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
TUNE
COLOUR
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
AUTO
VHFL
OFF
0
2 Press the P+/- buttons to
select "AUTO SEARCH".
TUNE
COLOUR
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
3 Press the V+ button to
ensure automatic search
function operates. All channels
now playing program will be
automatically preset in order .
After the search has finished,
the first program number will
display on the screen.
Display function
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
3
AUTO
BG
AUTO
VHFL
OFF
0
Searching channel
Continued
Semi-automatic search
Semi-automatic search
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
buttons to choose desired
channels I.E. channel 1
1
AUTO
BG
TUNE
2 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
3 Press the P+/- buttons to
P+
V
MENU
select " SEARCH".
V+
P
TUNE
COLOUR
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
4 Press the V-/+ buttons to
start searching.
6
The V- down button is used for
lower side program search.
The V+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
SEARCH
152.25MHz
AUTO
VHFL
OFF
0
To turn off the on-screen menu
In general, after you press the MENU button, the menu item
display (PICTURE, TIME, FUNCTION, TUNE, EXCHANGE,
EXIT
ETC.) will automatically disappear within 15 seconds. If you
want to eliminate these contents immediately, please press
the EXIT button.
Searching channel
Continued
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
BG
2 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
3 Press the P+/- buttons to
select " FINE TUNE".
4 Press the V-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained.
TUNE
COLOUR
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
5
FINE TUNE
152.25MHz
AUTO
VHFL
OFF
0
Searching channel
Continued
Program skip
Program skip
Channels can be set so that they are skipped during
program selection.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
BG
2 Press the TUNE button , the
TUNE menu shown on the right
display on the screen.
3 Press the P+/- buttons to
select "SKIP".
TUNE
COLOUR
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
AUTO
VHFL
OFF
0
4 Press the V-/+ buttons to
turn the SKIP function "ON".
5 Press the TUNE button to close
the menu. When you use the P+/buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
TUNE
COLOUR
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
AUTO
VHFL
ON
0
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the V-/+ buttons to turn the SKIP function "OFF".
Convenient picture and sound control functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
STANDARD
Press the P.STD button to select the
RICH
desired picture quality. Five kinds
of picture modes (i.e., "STANDARD",
"RICH", "USER","LISTEN",
USER
LISTEN
"SOFT" ) can be selected in turn.
SOFT
The 5 modes are
Listen-This is a new feature that blacks out the TV
screen when listening to music only channels;
Soft-Designed for night time low light viewing;
Standard -Designed for rooms that have good all round
lighting;
Rich-Designed for rooms with high ambient lighting such
as daytime sport;
User-A spare setting that can be adjusted to personal
tastes.
How to customize your own picture status
1 Press the PICTURE button, the PICTURE menu shown on
the right display on the screen.
2 Press the P+/- buttons to
select the item to adjusted,
then press the V-/+ buttons
to obtain the desired effect.
ITEM
PICTURE
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
BLACK STRETCH
Press V -
48
32
48
40
60
OFF
Press V +
CONTRAST
Weak
Strong
BRIGHTNESS
Dark
Bright
COLOUR
Shallow
Deep
SHARPNESS
Soft
Sharp
*Hue
lean to purple
lean to green
Note:
The "Hue" item only appears when the colour system is NTSC.
Convenient picture and sound control functions
Continued
Black Stretch Automatically increases the contrast range
Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception)
Black stretch and noise reduce
How to select BLACK STRETCH
1 Press the PICTURE button, the
PICTURE menu shown on the
right display on the screen.
2 Press the P+/- buttons to
PICTURE
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
BLACK STRETCH
48
32
48
40
60
OFF
PICTURE
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
BLACK STRETCH
48
32
48
40
60
ON
select "BLACK STRETCH".
3 Press the V-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
How to select NOISE REDUCE
1 Press the FUNCTION button,
the FUNCTION menu shown on
the right display on the screen.
2 Press the P+/- buttons to
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
select "NOISE REDUCE".
3 Press the V-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
Convenient picture and sound control functions
Continued
Mute, Select Language and Fade function
Sound mute
1 Press the MUTE button on the
remote control to turn off the
sound. MUTE will appear on the
top left of the display.
MUTE
2 Press MUTE again to turn the
sound back on.
How to select Language
1 Press the FUNCTION menu
button , till the FUNCTION menu
shown on the right display on the
screen.
2 Press the P+/- button to
select " ENGLISH ".
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
OFF
ON
OFF
ON
3 Press the V-/+ buttons to
select the OSD language.
FADE FUNCTION
Using on/off fade function, the TV turn on or turn
off mild.
1 Press the FUNCTION button,
the FUNCTION menu shown on
the right display on the screen.
2 Press the P+/- button to
select FADE.
3 Press V-/V+ buttons to turn
the FADE function ON or OFF.
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
OFF
ON
OFF
ON
Time functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock loses power and will need to
be reset when the power is reconnected.
1 Press the TIME button, and
the TIME menu display on the
screen.
2Press the P+/- buttons select
"CLOCK", then press the V-/+
buttons to adjust the time in
hour position; press again the
P+/- buttons to select the time
in minute position, then press
the V-/ +buttons to adjust the
value of minutes .
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
1
--:-0
--:-1
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
1 Press the TIME button to call
up the TIME menu on the
screen.
2 Press the P+/- buttons to
select "ON TIME", then press
the V-/+ buttons to set the value
in hour position; press again the
P+/- buttons to select the minute
position and set the value of the
minute.(take 18:00 as an
example)
3 Press the P+/- buttons to
select "ON PROG", then press
the V-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
1
--:-0
--:-1
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
0
--:-1
Time functions
Continued
Sleep timer and program preset
Sleep timer
The TV set have 18 sections
option for sleep timer function
(each section has a time
interval of 10 minutes) (See right
chart):
0
10
20
170
1 Press the TIME button, and
the TIME menu display on the
screen.
2 Press the P+/- buttons to
select "SLEEP TIMER".
3 press the V -/+ buttons to set
the value of the SLEEP TIMER.
180
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
--:-1
REMIND PROG function
Program remind timer, that displays an on-screen reminder
prompt, when a program on a different channel is due to start.
1 Press the TIME button to call
up the TIME menu on the
screen.
2 Press the P+/- buttons to
select "REMIND TIME", then
press the V-/+ buttons to set
the value in hour position;
press again the P+/- buttons to
select the minute position, and
then set the value of the
minute.(take 19:00 as an
example)
3.Press the P+/- buttons to
select "REMIND PROG", then
press the V -/+ buttons or the
program direct number buttons
to set the desired channel
(take 18 as an example).
NOTE: For REMIND PROG to
operate CHILD LOCK must be
turned off.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
19:00
1
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
19:00
18
Set up function
Screen saver and childlock functions
How to start screen saver function
When the background
function if ON a bouncing
'NO SIGNAL' will be
displayed on a blue
back ground.
NO SIGNAL
1 Press the FUNCTION button,
the FUNCTION menu shown on
the right display on the screen.
2 Press the P+/- buttons to
select "BACKGROUND" and press
the V-/+ buttons to turn the
BACKGROUND function "ON" .
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
Child lock function
Enables the TV front control buttons to be locked.
1 Press the FUNCTION button,
the FUNCTION menu shown on
the right display on the screen.
2 Press the P+/- buttons to
select "CHILD LOCK" and press
the V-/+ buttons to turn
CHILD LOCK function "ON" .
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
ON
ON
NOTE:
All the control panel buttons on the front of the TV are disabled
when CHILD LOCK is turned on. The power switch will still turn
the TV set off.
Set up function
Continued
AVL and calendar functions
AVL function
Automatic Volume Limit Control reduces the effect of
large volume changes. For instance, when
advertisements come on.
1 Press the FUNCTION button,
the FUNCTION menu shown on
the right display on the screen.
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
2 Press the P+/- buttons to select
"AVL" .
3 Press V-/+ buttons to turn the
AVL function "ON" or "OFF".
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
Calendar function
Enables the TV sets internal calendar to be set.
1 Press the FUNCTION button,
the FUNCTION menu shown on
the right display on the screen.
2 Press the P+/- buttons to select
"CALENDAR" , then press the
V-/+ buttons to the CALENDAR
display on the screen.
3 Press the P+/- buttons to turn
the YEAR/MONTH/DAY, press
V-/+ buttons to set or adjust
the YEAR/MONTH/DAY.
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
Position exchange function
Exchange
Exchange
This feature enables TV programs that may be on a wrong TV
channel number to be swapped/exchanged. This feature is
very useful when Automatic Search Tuning has been used, to
reallocate the found programs to the correct channel numbers.
1 Press the MENU button ,
till the EXCHANGE menu
display on the screen.
2 Press the V-/+ buttons or the
PROGRAM NUMBER 0-9
buttons to set PROGRAM 1 TO 6.
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
2
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
3 Press the P+/- buttons to
select " PROGRAM 2".
4 Press the V-/+ buttons or
the PROGRAM NUMBER 0-9
buttons to set PROGRAM 2 TO 9.
5 Press the P+/- buttons to
select "EXCHANGE".
6 Press the V-/+ buttons to set
"EXCHANGE".
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
Teletext
Teletext is an information system, broadcast by certain channels, which can be read like
a newspaper . It also provides subtitles for people with hearing difficulties or those who
are unfamiliar with the language in which a particular program is being broadcast (cable
networks, satellite channels, etc.).
Teletext
Teletext functions
To select Teletext press the Teletext button on the
handset. To switch off Teletext, press the button again.
Note all menu functions are not available in Teletext
mode . Only a few direct button control functions are
available in TELETEXT mode, they are:
Volume adjustment, but without OSD display.
Mute function, but without OSD display.
Page up/down
Use the P+/- buttons to browse next or previous page.
Page number entering
To select a Teletext page, enter the page number using
the numeric key pad on the remote control, or use the
P+ or P- buttons, or the coloured Fast text buttons.
Mix mode
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the Tv picture. Press this button again to return to
Full text.
INDEX
Press the tune button to go to the index page of teletext.
Teletext
Continued
Teletext
Cancel mode
This feature allows the TV picture to be displayed while next
page to be searched is entered and found. Only the top
teletext line is displayed until the page is found. Press the
button to hide the teletext information. Either press the
button or the Text button to exit the cancel display mode.
Language change
Pressing the
button will change the Teletext characters
between Eastern and Western.
Hold
Pressing the
button will stop the teletext page automatically updating. This feature is very useful where there are
several teletext pages or data on the same page number.
Size
Pressing the
button changes between full screen top
half bottom half full screen. This feature is very useful as it
magnifies the image making the characters easier to read.
Reveal
Pressing the
button will reveal hidden text. This feature
is used to reveal information such as answers to Teletext
on-line interactive puzzles.
Subcode / Time
By entering its 4-digit number to enter a secondary page;While
in normal TV mode only, pressing the button will display the
teletext time in the top right hand corner for a few seconds.
Switch teletext on/off
Press the
button on the remote control to turn teletext
On/Off.
Fast text coloured buttons
Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may want
to choose next. Press the same coloured button on the
remote control as the coloured link at the bottom of the
teletext page to go directly to that page.
Basic Playback
Basic Playback
Preparations
Press the TV/DVD button on the remote control
or the TV to enter the DVD status.
Basic playback
1. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some discs do not start automatically. Press
PLAY/ENTER to start playback.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Pause playback
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
Stop playback
1. Press STOP
button to stop the disc
playing. With some discs the player will
memorize the stop position, such as DVD's
and audio CD's.
2. Press PLAY/ENTER to playback to resume playback from the location where playback is stopped
or from the beginning of the disc.
3. Press STOP twice to stop completely.
Previous and Next
During Playing, pressing the PREV
key will
restart the current chapter and skip chapters
backwards with each subsequent press until the
start of the disc is reached.
Each press of NEXT
key during playing will
skip the current chapter and play the next one.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
Each time the FWD
button is pressed, the
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
3. Press REV
to fast reverse through the disc.
Each time the REV
button is pressed, the
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
Single step playback
To single step press the Pause button,
then press Pause/Step in continuous steps
to view the next frame.
Advanced Playback
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION
AND DISPLAY ON SCREEN WILL BE SOME DIFFERENCE.
CAPTION
Press " CAPTION ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages displayed on screen.
REPEAT
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
A-B
Press " A-B " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
ANGLE
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles,for example,front, side, whole view
and exterior scene).
D.MENU
PROGRAM
When playing discs,press "PROGRAM" to
enter program mode. Press the digit buttons to
select the program number that you want. When
finished move the cursor to select "START" . This
will start the program playback.
SEARCH
Press "SEARCH" once to display the search
menu. Press the button again to select. And
then press the digit (0-9) buttons to select the
number. Press PLAY/ENTER to confirm.
SLOW
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press PLAY/ENTER to resume normal playback;
Note: This function is invalid for CD and MP3.
TITLE/PBC
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
Press this key can change the mode of audio.
Press this key to display root menu,select item
according to your preference. (This function will work such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
with a DVD having a multi-layer menu.)
Press this button to cycle between Mono Left, Mono
Right, Mix-Mono and Stereo.
D.CALL
Pressing this key will cycle through "title elapsed",
"title remain", "chapter elapsed", "chapter remain"
and "display off ".
Note: When press this button continuously, you must
above 3 seconds interval.
Special Function Playback
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use the UP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
JPEG disc contains with JPG-format picture information which can be decoded by microcomputer software and output through video output interface for enjoying on TV screen.
Such function can be used in many domains. For example, in education, teachers can
change those pictures for class into JPG-format file by digital camera or scanner, which is
commonly used in computer, and record them into CD-R disc through disc recorder. It
will be convenient for and direct to the students when teachers play the disc by TV set
or other equipment in class. That reduces teachers' repetition work and good for
reservation (information in disc can be reserved for more than 100 years); in family, users
can record pictures which formed by digital camera or scanner into CD-R disc. Suppose
one picture occupies about 100K bytes, then one disc may record about 6000 pictures;
in commerce, manufacturers can show the products pictures one by one to consumers.
NOTE: The actual content will be different as per disc.
MP3 PLAYBACK
When playing an MP3 disc, a navigation menu will be displayed automatically. In the
menu, use UP or DOWN cursor buttons to choose the folder, then press
PLAY/ENTER to enter the folder. Use the UP and DOWN cursor buttons to select
the file and press PLAY/ENTER. Pressing the LEFT cursor button will take you to
the previous screen/menu.
SCREEN SAVER FUNCTION
This unit employs a screen saver mode to help protect the tube during static video
pictures. This can be turned off on the GENERAL SETUP PAGE (see Pg. 28)
Special Function Playback(Continued)
Kodak Picture CD
A Kodak Picture CD has the size and shape of a regular CD. You can order a
Kodak Picture CD simply by checking the box on the photofinishing envelope
when you drop off a roll of film (35 mm or Advanced Photo System (APS) color
print film) at the time of processing in Kodak Express store displaying "Kodak
Picture CD" sign. When your order is returned, you receive your prints,
negatives, and your full roll of pictures safely stored on your Kodak Picture CD.
Each Kodak Picture CD brings you the tools to enhance, share and manage
your pictures on your computer.
Playback
When a Kodak Picture CD is inserted in the player an automatic slide show is
launched. Each picture in the Kodak Picture CD will be displayed consecutively
in a slide-show fashion and will be scaled to fit in the whole TV screen.
To display an image indefinitely, press the "PAUSE" key.
To resume the slideshow, press the "PLAY/ENTER" key.
To view the next or previous picture, press "NEXT" or "PREV" key.
After all the slide have played the screen displays the folder and file view of the
folder containing the photographs. You can select a photo with the up and down
DVD cursor buttons then press PLAY / ENTER resume the slide show from that
point.
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.
2.Press CH+/or b
item, then press
submenu.
to select, the
to enter the
or bu to select then
3.Press CH+/press PLAY/ENTER to confirm.
4.Press EXIT key or press SETUP
repeatedly to exit the set-up
menus.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
.
LB 4 3:Ps
.
On 4 3:Lb
ENG 16 9
On
Off
..Preference Page..
TV Type Auto
Parental
Password
Default
PAL
AUTO
NTSC
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
The following information applies only
when the DVD output is connected to an
external TV.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
.
LB 4 3:Ps
.
On 4 3:Lb
ENG 16 9
On
4 3/PS (PS = Pan and Scan)
Off
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4 3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16 9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
ANGLE MARK: Users can select a particular
camera angle .when playing a DVD which offers
multiple angles.
This item allows you to set Angle Mark ON or OFF.
On Screen Display (OSD) Language: Users
can select on-screen display language.
SPDlF OUTPUT MODE: Sets the audio outputs.
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is output through the
back-paneI connections for 2-CH audio out or 5.1 CH audio out.
2. SPDlF/RAW or SPDIF/PCM: This
surround sound format is output to a Dolby Digital/DTS decoder
through the coaxial connector on the back panel of the product.
..General Setup Page..
TV Display
LB
Angle Mark
On
On
OSD Lang
ENG
Off
Spdif Output
Captions
On
Screen Saver Off
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
LB
On
ENG English
German
On
Off
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
LB
On
ENG
On
Off
Spdif Off
Spdif: Raw
Spdif: Pcm
CAPTIONS: This functionallows you to display or hide the caption.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
SCREEN SAVER: If the screen saver is on,then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes .
LB
On
ENG
On
Off
On
Off
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
LB
On
ENG
On
Off
On
Off
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discs which are inserted and played.
TV TYPE: This player
supports different TV output,
including MULTI(Auto),
NTSC, and PAL systems.
Usually please set to MULTI.
PARENTAL: The parental
control function works in
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
..Preference Page..
PAL
AUTO
NTSC
TV Type Auto
Parental
Password
Default
..Preference Page..
TV Type Auto
Parental
Password
Default
1 Kid Saf
2G
3 Pg
4 Pg 13
5 Pgr
6R
7 Nc17
8 Adult
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to OFF, all discs may be viewed.
PASSWORD CHANGE:
You can change your password
by entering 4 digits. Your must
confirm the 4 digits before the
new password can be accepted.
..Preference Page..
TV Type Auto
Parental
Password
Default
Old Password
New Password
Confirm PWD
NOTE:If you forget your password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.
Change
DVD System Setup(Continued)
DVD System Setup
DEFAULT: Resets all settings
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
..Preference Page..
TV Type Auto
Parental
Password
Default
Reset
Note:
Some functions may not be available depending on the type of disc.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play discs of non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases,
their performance may be not very well or even no performance.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
Encode
method
LD
Digital/MPEG
Double
-side
single
-layer
8.5G
Analog
Singleside
doublelayer
9.4G
Doubleside
doublelayer
17G
133
242
266
Playing Time minutes minutes minutes
484
minutes
Capacity
Disc diameter
Singleside
singlelayer
4.7G
12cm/8cm
Horizontal
resolution
More than 500 line
Picture
proportion
Multiple kinds
Subtitle
Language
Sound quality
32 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
Single-side
60 minutes
double-side
120 minutes
30cm/20cm
SVCD
VCD
Digital
Digital/
MPEG I
650MB
650MB
45 minutes 74 minutes
12cm
12cm
CD
Digital
650MB
74 minutes
12cm/8cm
No more than No more than No more than
430 line
350 line
250 line
One kind
16 kinds
at most
One kind
One kind
4 kinds
4 kinds
at most
4 kinds
at most
2 kinds
2 kinds
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Connecting the TV set to the other video and audio equipment
Connecting to the other video and audio equipment
You can attach optional equipment such as another TV or other audio
amplification equipment to the scart/digital coaxial sockets at the rear
of the set to enjoy higher quality sound and picture.
Amplifier
To another
TV SCART
terminal
To COAXIAL
type digital
audio input
Coaxial cable
To DVD EXT
DVD EXT
COAXIAL
TV EXT
To TV EXT
To TV EXT
To outside input
To video/audio input
DVD, VCD and other reproducing equipment
Stereo
Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
PICTURE
SOUND
CHECKING
The aerial direction and connection
Picture with snow
Double or Triple Image
Noise
Normal
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Disturb
Noise
Volume Sound mute
Normal
No Picture
No sound
No sound
Ensure that the power supply is connected to
the TV set and turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
Adjust colour control
No colour
Normal volume
Adjust channel again
Scramble
Colour Spot
Normal or Weak Volume
Normal volume
Colour Purity fault which can be caused by moving the
TV set, placing magnets near the TV screen or turning
on/off house hold appliances such as vacuum cleaners
near the TV set. Turn the TV off with the mains power
switch for 15 minutes. When the power is turn on again
the TV set will automatically degauss the picture. In
server cases leave the TV set turned off over night.
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
34
Specifications
The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Specifications
TVD6040
Model
Colour system
PAL, NTSC PLAYBACK
Sound system
BG
Picture tube
21"colour picture tube (51cm viewable)
Sound output power
2X2W
Power requirements
AC 230V
Power consumption
80W
10% THD
50Hz
Dimension
504
Accessories
Remote control
Owner's manual
Battery(AAA)
Width
x482
Depth
x512
Height
mm
X1
X1
X2
If at any time in the future you should need to dispose of this product please note that
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling
advice.(Waste Electrical and Electronic Equipment Directive)
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
Download PDF

advertising