Avanti 3000 Telephone User Manual

3015_3000txt.book Page 1 Wednesday, August 4, 1999 11:13 AM
Avanti 3015 set
Avanti 3000 set
User guide
79-650-0010/A
Issue 1
Printed in Israel
3015_3000txt.book Page 2 Wednesday, August 4, 1999 11:13 AM
79-650-0010/A, Issue 1
3015_3000txt.book Page 3 Wednesday, August 4, 1999 11:13 AM
79-650-0010/A, Issue1
Avanti 3015 set
Avanti 3000 set
User guide
Telrad Telecommunications Inc.,
Woodbury, New York
3015_3000txt.book Page 4 Wednesday, August 4, 1999 11:13 AM
NOTICE
This publication refers to Telrad's Avanti 3015 set
and Avanti 3000 set connected to Telrad's DIGITAL KEY BX system, Release SB7, or Telrad's
DIGITAL 400 system, Release DB7, or Telrad’s
DIGITAL 1000 system, Release LB7, as of July,
1999.
Telrad reserves the right to modify the equipment
and the software described herein without prior
notice. However, changes made to the equipment
or to the software described herein do not necessarily render this publication invalid.
© 1999 Telrad Telecommunications Inc.,
Woodbury, New York
3015_3000txt.book Page iii Wednesday, August 4, 1999 11:13 AM
CONTENTS
ABOUT YOUR AVANTI TELEPHONE ................................................ 1
TELEPHONE SET BUTTONS ............................................................ 1
DISTINCTIVE RINGING ..................................................................... 6
MUTE .................................................................................................. 7
HOT DIALPAD .................................................................................... 8
INTERNAL CALLS .............................................................................. 9
BARGE INTO A CONVERSATION ................................................... 10
PAGE CALLS .................................................................................... 10
ANSWERING CALLS ........................................................................ 11
CALL WAITING ................................................................................. 11
OUTSIDE CALLS .............................................................................. 13
AUTOMATIC REDIAL ....................................................................... 14
WAITING FOR AN AVAILABLE OUTSIDE LINE .............................. 14
CIRCUMVENTING EXTENSION RESTRICTIONS .......................... 15
OBTAINING SPECIAL SERVICES VIA LINES DEFINED
AS BEHIND AN EXCHANGE ............................................................ 16
HOLD ................................................................................................ 17
TRANSFERRING CALLS ................................................................. 18
CONFERENCE CALLS ..................................................................... 19
PICKUP ............................................................................................. 20
MESSAGES ...................................................................................... 21
SENDING MESSAGES...................................................................... 21
RECEIVING MESSAGES .................................................................. 21
DELETING ALL MESSAGES............................................................. 21
DO NOT DISTURB (DND) ................................................................ 22
DND MESSAGES .............................................................................. 23
FORWARDING CALLS ..................................................................... 24
CANCELING CALL FORWARD TO ME ............................................ 26
ABBREVIATED DIALING .................................................................. 27
SPEED DIAL ..................................................................................... 27
MEMORY BUTTONS ........................................................................ 28
ALARM .............................................................................................. 29
TELEPHONE LOCK .......................................................................... 30
DOOR UNIT ...................................................................................... 31
NOTE PAD ........................................................................................ 32
ADVANCED FEATURES .................................................................. 33
FEATURE CODES ............................................................................ 34
iii
3015_3000txt.book Page iv Wednesday, August 4, 1999 11:13 AM
Figure 1 Avanti 3015 set faceplate
iv
3015_3000txt.book Page v Wednesday, August 4, 1999 11:13 AM
Figure 2 Avanti 3000 set faceplate
v
3015_3000txt.book Page 1 Wednesday, August 4, 1999 11:13 AM
ABOUT YOUR AVANTI TELEPHONE
The Avanti 3000 set and the Avanti 3015 set are equipped
with onhook dialing and hot dialpad capability, which
enable you to dial or operate any feature by pressing the
dialpad buttons. Only when you speak it is necessary to lift
the handset.
NOTE
This guide describes the regular operation of the
telephone. The configuration of your particular
system and telephone may introduce differences
in operation. For example, some of the features
and buttons described in this guide may not be
available on your telephone set. For more information, see your System Administrator.
TELEPHONE SET BUTTONS
The Avanti 3000 set has eight fixed feature buttons plus
four programmable buttons above the dialpad.
The Avanti 3015 set has 15 additional programmable buttons to the right of the dial pad (see Figure 1 above).
NOTE
In this guide, fixed buttons appear in bold type,
in capital letters, within brackets, e.g., [HOLD].
User programmable buttons appear in capital
letters, e.g. SPEED DIAL.
Avanti 3015 and Avanti 3000 sets
1
3015_3000txt.book Page 2 Wednesday, August 4, 1999 11:13 AM
The telephone sets’ programmable buttons have dual-color
light indicators. The color and flash rate of the indicators
show the status of the programmed line, feature or extension.
In general, red indicates non-availability (for example, a
busy line); green indicates that you are using the feature or
line or that it is available to you.
User-programmable buttons
Some of the buttons on your telephone may be user-programmable SPEED DIAL or MEMORY buttons. You may
program these to access extensions, features or outside
lines.
Fixed feature buttons
The following fixed feature buttons appear on your telephone set:
[HOLD]
This button places a call on hold.
[FEATURE]
Press [FEATURE] and then dial a feature access code to
activate features (see the Feature codes table at the end of
this guide).
[PICK UP]
Press this button to pick up calls.
[TRANSFER/CONFERENCE]
Press this button to transfer calls and when establishing
and exiting conference calls.
NOTE
The [TRANSFER/CONFERENCE] button is
referred to as [TRANSFER] or [CONFERENCE], depending on the operation being
described.
2
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 3 Wednesday, August 4, 1999 11:13 AM
[SPEED DIAL/PROGRAM]
This button is used for speed dialing and for programming
various features.
[REDIAL/PAUSE]
This buttons lets you automatically redial the last outside
number you dialed, after first accessing an outside line.
Pressing this button while dialing on an external line inserts
a pause in a dialing sequence.
[LO HI]
This button adjusts the volume of the speaker, handset,
headset, ringer and background music when any of these
is active.
[FLASH]
Depending on system programming, this button is used to
disconnect or to send Flash Signal to the connected
remote exchange.
Programmable buttons
The following buttons on your set have already been programmed to perform specific functions. The System
Administrator can program these buttons to perform other
functions. If the function of certain buttons does not match
those appearing in Figure 1 at the beginning of this guide,
consult your System Administrator.
NOTE
With the default configuration, the following features are programmed on the four buttons above
the dialpad: [MSG], [DND], [MUTE] and [SPKR].
Avanti 3015 and Avanti 3000 sets
3
3015_3000txt.book Page 4 Wednesday, August 4, 1999 11:13 AM
[MSG]
This button is used to send messages to other extensions
and to reply to messages left at your extension.
[DND]
This button activates and deactivates Do Not Disturb.
[MUTE]
This button disables/enables your telephone microphone.
[SPKR]
For handsfree operation, press [SPKR] instead of lifting or
replacing the handset.
DN buttons
DN buttons are buttons associated with specific Directory
Numbers.
The first DN button is your Primary DN button, which has
the same number as your extension. The Primary DN button is used for making and receiving most of your calls.
Whenever you pick up the handset, your Primary DN button, or - if it is not available - another DN button lights
green.
If no DN buttons are available, no DN button lights, you do
not receive dial tone, and you cannot place or answer calls.
NOTES
Not all telephone sets are programmed with DN
buttons. The instructions in this manual often
contain references to DN indicators and displays of DN numbers. If your telephone set is
not programmed with DN buttons, disregard
these references.
4
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 5 Wednesday, August 4, 1999 11:13 AM
Many of the instructions offer a number of
options, one of which is pressing a DN button. If
your telephone set is not programmed with DN
buttons, choose one of the other options, or skip
the step of pressing the DN button.
Some of the features operate slightly differently
on a telephone set that is not programmed with
DN buttons. These differences are indicated
where relevant. Consult your System Administrator for further details about the programming
of your telephone set.
DN buttons may be programmed in three different modes:
• ringing mode - the telephone rings and the DN button
flashes green when a call is received.
• flashing mode - the DN button flashes green when a
call is received, but there is no ringing.
• delayed ringing mode - a call rings first at another set
or group of sets, for a programmed length of time,
before beginning to ring at your set.
Outside line buttons
One or more of the buttons on your telephone may be
associated with either specific lines or outside line groups.
To access a line for dialing outside the system, press an
outside line button.
Floating buttons
Calls on outside lines for which no button has been
defined, may be associated with a button just for the duration of the call. These buttons are called “floating” buttons.
NOTE
Some of the access codes in your system may
be different from those indicated here. If so, see
your system administrator for the correct codes.
Avanti 3015 and Avanti 3000 sets
5
3015_3000txt.book Page 6 Wednesday, August 4, 1999 11:13 AM
DISTINCTIVE RINGING
You can program telephone sets located close to each
other with distinctive rings, to enable you to identify which
telephone is ringing. Nine different rings are available.
To change the ring for your telephone set
1. Press [*] and [#] simultaneously.
2. Press one of the dialpad buttons ([1] - [9]).
When you hear the ring that you want:
3. Press [#].
4. Lift and replace the handset.
Your telephone set reinitializes and all telephone rings
(internal, external, recall, etc.) sound with the distinctive
ring selected.
6
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 7 Wednesday, August 4, 1999 11:13 AM
MUTE
If you want to talk to someone in your office during a call,
without the connected party hearing, you can disable the
handset or telephone set microphone.
To enable or disable the microphone
(MUTE)
• Press [MUTE] during a conversation.
To enable or disable
the handset microphone (HANDSET MUTE)
During a handset call:
• Press [HS MUTE] (if programmed).
NOTE
If your set is Single Audio Path (SAP), pressing
[MUTE] deactivates both microphones.
ALLOWING OTHER PEOPLE TO HEAR
YOUR CONVERSATION (SPEAKER MONITOR)
While you are speaking through the handset, the conversation can be directed through your telephone speaker, so
that people in your vicinity can hear the other end of the
conversation.
1. Press [FEATURE].
2. Press [SPKR].
The [SPKR] indicator turns on.
Both you and the other party are heard via the speaker.
Avanti 3015 and Avanti 3000 sets
7
3015_3000txt.book Page 8 Wednesday, August 4, 1999 11:13 AM
HOT DIALPAD
The hot dialpad enables you to dial and activate features
without lifting the handset or pressing [SPKR] first.
NOTE
The instructions in this guide assume that you
have hot dialpad capability.
8
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 9 Wednesday, August 4, 1999 11:13 AM
INTERNAL CALLS
To place a non-ringing call
1. Dial the extension number.
When the called party answers:
2. Lift the handset to talk.
To place a ringing call
1. Dial the TONE access code [1].
2. Dial the extension number.
If the extension you called is busy
(CALL BACK)
When you dial an extension and hear busy tone, you can
activate the Callback feature:
1. Press [FEATURE].
2. Dial the CALLBACK/QUEUE access code ([2][2]).
3. Hang up.
When the called extension becomes available, your telephone rings.
4. Then:
Lift the handset.
You hear the called extension ringing.
To cancel Call back
1. Dial the CANCEL code [#].
2. Press [FEATURE].
3. Dial the CALLBACK/QUEUE access code ([2][2]).
4. Hang up.
Avanti 3015 and Avanti 3000 sets
9
3015_3000txt.book Page 10 Wednesday, August 4, 1999 11:13 AM
BARGE INTO A CONVERSATION
Depending on system programming, you may be able to
break into another conversation.
When you dial an extension and hear busy tone:
1. Press [FEATURE].
2. Dial the BARGE IN access code ([2][4]).
A warning tone is heard by all parties, depending on
system programming.
PAGE CALLS
You can make announcements through an external page
unit, or through the speakers of all DIGITAL telephones in a
page zone.
1.
2.
3.
4.
Lift the handset.
Press [FEATURE].
Dial the PAGE zone access code ([4][1] - [4][8]).
After the double tone burst:
Make your announcement.
To speak directly with a page initiator
(MEET ME PAGE)
You can call a page initiator during a page call:
1. Lift the handset.
2. Press [FEATURE].
3. Dial the MEET ME PAGE access code ([6][6]).
4. Dial the PAGE zone access code.
10
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 11 Wednesday, August 4, 1999 11:13 AM
ANSWERING CALLS
When you receive a call an indicator flashes green on a
telephone set that is programmed with DN buttons. You
usually also hear a ring, unless your set has been programmed not to ring.
To answer a ringing or flashing call
• Pick up the handset
or
• Press the flashing button and pick up the handset.
After you answer the call the indicator of the DN or private trunk line lights steady green.
To answer an intercom call
(coming through your telephone speaker)
• Talk through the microphone.
If you prefer, you may lift the handset instead.
CALL WAITING
You may hear a beep, indicating a second call, while
already engaged in a conversation.
You can answer the call without disconnecting the first call.
To answer a second call
1. Press [HOLD];
the first call is put on hold. The indicator for that line
flashes green.
2. Press the DN or outside line button that is flashing
green;
you receive the second call.
Avanti 3015 and Avanti 3000 sets
11
3015_3000txt.book Page 12 Wednesday, August 4, 1999 11:13 AM
To return to the first call
1. Press [HOLD].
2. Press the flashing DN button.
or
1. Press [PICK UP].
2. Press [HOLD].
NOTE
If your telephone does not have DN buttons, you
cannot put an internal call on hold. This means
that you cannot answer another arriving internal
call without disconnecting the first internal call.
In this case, you must hang up first. You can
then answer the second call when it rings.
12
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 13 Wednesday, August 4, 1999 11:13 AM
OUTSIDE CALLS
Outside calls may be placed by accessing an outside line
(or group) or using the Least Cost Routing (LCR) feature.
When the instructions tell you to access an outside line,
you may:
•
•
•
Dial an outside line or outside line group number;
Press an outside line or outside line group button;
Dial the LCR access code (usually [9]).
To place an outside call
1. Obtain an outside line.
2. Dial the desired number.
See also Abbreviated dialing, below.
When the called party answers:
3. Lift the handset to talk.
To redial the last outside number you dialed
1. Obtain an outside line.
2. Press [REDIAL].
To save a frequently dialed
outside number (SAVE/REPEAT)
After dialing the desired number, but before hanging up:
1. Press [FEATURE].
2. Dial the SAVE/REPEAT access code ([7][7]).
Avanti 3015 and Avanti 3000 sets
13
3015_3000txt.book Page 14 Wednesday, August 4, 1999 11:13 AM
To dial the number saved
1. Access an outside line.
2. Press [FEATURE].
3. Dial the SAVE/REPEAT access code ([7][7]).
AUTOMATIC REDIAL
If you dial an outside number and hear busy tone you can
have the system redial the number several times, at predefined intervals.
When you hear busy tone:
• Press an ARD button.
When the called party answers:
• Lift the handset.
If the dialed number rings, or if the system makes the maximum number of dialing attempts, the Automatic redial is
deactivated.
To temporarily deactivate
or reactivate Automatic Redial
• Press the ARD button again.
NOTE
Several Automatic redials may be activated
simultaneously by using more than one ARD
button.
WAITING FOR AN AVAILABLE OUTSIDE LINE
(TRUNK QUEUE)
When you try to select an outside line and hear busy tone:
1. Press [FEATURE].
2. Dial the CALLBACK/QUEUE access code ([2][2]).
14
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 15 Wednesday, August 4, 1999 11:13 AM
When an outside line becomes available, the system rings
your extension. Then:
3. Lift the handset.
4. Listen for outside dial tone and dial the desired number.
To cancel trunk queue
1. Dial the CANCEL code [#].
2. Press [FEATURE].
3. Dial the CALLBACK/QUEUE access code ([2][2]).
4. Hang up.
CIRCUMVENTING EXTENSION RESTRICTIONS
(TRAVELING CLASS OF SERVICE)
You can dial an outside number from a toll-restricted telephone by temporarily assigning it your own extension's
Class Of Service (COS) or a system-wide (Global) COS,
accessible only to privileged users.
1. Press [TC] (if defined) or dial the TRAVEL COS (Class
Of Service) access code.
2. Dial your extension number - to apply your extension's
COS, or
Press [*] for a Global COS.
3. Dial your ECC authorization code or a Global COS
code.
The [TC] indicator (if defined) lights.
The Travel COS feature is active for a predefined
period.
4. Access an outside line and place a call.
Avanti 3015 and Avanti 3000 sets
15
3015_3000txt.book Page 16 Wednesday, August 4, 1999 11:13 AM
OBTAINING SPECIAL SERVICES
VIA LINES DEFINED AS BEHIND AN EXCHANGE
(CENTREX OR PBX)
You may be able to access special services provided by a
CENTREX or PBX exchange.
To access services while connected
to the outside line
1. Press [FEATURE].
2. Press [FLASH].
16
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 17 Wednesday, August 4, 1999 11:13 AM
HOLD
There are two types of hold:
• Exclusive hold: the call can be retrieved only from
your extension.
• Inclusive hold: the call can also be retrieved by other
sets with a button for that appearance.
You cannot transfer a call that is on hold.
When you place a call on hold, you automatically receive
dial tone and can make a page call or dial to another extension. If you do not receive dial tone, this means that no DN
is available.
To place a call on exclusive hold
• Press [HOLD] once.
The indicator flashes green on your set and red on
other sets with a button for that line.
To place a call on inclusive hold
• Press [HOLD] twice.
The indicator flashes green on all sets that have a button for that line.
Depending on the programming of your extension, the first
press of hold may activate Inclusive hold, and the second
press, Exclusive hold. See your System Administrator.
To pick up a call from hold
• Press the flashing button of the call on hold.
or
1. Press [PICK UP].
2. Press [HOLD].
Avanti 3015 and Avanti 3000 sets
17
3015_3000txt.book Page 18 Wednesday, August 4, 1999 11:13 AM
TRANSFERRING CALLS
You can transfer a call to another extension:
1. Press [TRANSFER].
2. Dial the extension number.
3. Announce the call when the other party answers and
then hang-up.
To retrieve a transferred call
If you have not yet hung up and the other party has not yet
answered the transferred call, you may retrieve the transferred call.
•
18
Press the line button associated with the call.
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 19 Wednesday, August 4, 1999 11:13 AM
CONFERENCE CALLS
A total of eight parties, any of which may be on outside
lines, can participate in a conference.
To establish a conference
1. Make the first call.
2. Press [CONFERENCE].
3. Make the next call.
After the call is answered:
4. Press [CONFERENCE] again.
5. Repeat steps 2 through 4 to add up to five more parties
to the conference.
Avanti 3015 and Avanti 3000 sets
19
3015_3000txt.book Page 20 Wednesday, August 4, 1999 11:13 AM
PICKUP
You can answer a call at another extension, without leaving
your desk.
To pick up a call on hold
or ringing at another extension
1. Press [PICK UP].
2. Dial the number of the extension at which the call is
ringing or on hold.
To pick up a call ringing in your pickup group
• Press a MEMORY button programmed with GROUP
PICK UP.
or
1. Press [PICK UP].
2. Press [*].
See ABBREVIATED DIALING for instructions on how to
program MEMORY buttons.
20
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 21 Wednesday, August 4, 1999 11:13 AM
MESSAGES
If after dialing an extension, there is no answer or you hear
busy tone, you can send a basic message or a message
from a predefined list, which appears on the display of the
extension you called.
When you send a basic message, display telephones show
“CALL” followed by your extension name or number (e.g.
“CALL STEVE”).
SENDING MESSAGES
To send a basic message
After dialing an extension:
1. Press [MSG].
2. Hang up
The message is sent.
RECEIVING MESSAGES
When messages have been left at your extension, your
[MSG] indicator lights and you hear a broken dial tone
when you lift the handset or press [SPKR]. If your set has
a display, it informs you of messages waiting for you.
To call the message sender
1. Press [SPKR].
2. Press [MSG].
DELETING ALL MESSAGES
To delete all messages left at your telephone
1. Press [#].
2. Press [MSG].
3. Hang up.
Avanti 3015 and Avanti 3000 sets
21
3015_3000txt.book Page 22 Wednesday, August 4, 1999 11:13 AM
DO NOT DISTURB (DND)
If you do not want calls to ring at your telephone, temporarily, you can activate the DND feature.
NOTE
If your telephone set is not programmed with DN
buttons, the DND indication is slightly different.
If the [DND] button flashes red, this indicates
that your set is programmed for Call forward.
You can deactivate Call forward by pressing the
flashing [DND] button.
To place your telephone in do not disturb mode
• Press [DND].
The DND indicator lights steady red, and no calls ring at
your telephone. Internal callers hear busy tone and see
your DND message, if programmed. If your set is programmed for DND call forwarding or for Call Forward,
calls are forwarded.
To cancel DND mode
• Press [DND].
The DND indicator goes off and calls ring at your set.
22
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 23 Wednesday, August 4, 1999 11:13 AM
DND MESSAGES
You can select a predefined message that appears on the
display of telephones that call your extension, while it is in
DND mode. You can also ask the System Administrator to
program additional messages.
To program a DND message
1. Press [FEATURE].
2. Press [PROGRAM].
3. Press [DND].
4. Enter a message number (two digits; e.g. 08. See the
DND messages table at the end of this guide for a complete list of available messages).
5. Hang up.
To cancel your DND message
1. Press [#].
2. Press [PROGRAM].
3. Press [DND].
4. Hang up.
Avanti 3015 and Avanti 3000 sets
23
3015_3000txt.book Page 24 Wednesday, August 4, 1999 11:13 AM
FORWARDING CALLS
You may program your telephone set to forward your calls
to another extension.
To program call forwarding
1. If your set does not have DN buttons, skip to step 2.
If you want to program forwarding for a specific DN, first
press the desired DN button.
If you want the calls on all the DNs at your set forwarded to the same destination, you may do this in one
step (provided you have authorization to do so and
none of the DNs are restricted for Call forwarding). Proceed as described below, but press [*] after entering
the destination (step 5).
If more than one set with a button for the same DN is
authorized to forward calls for that DN, the last programming performed overrides the previous.
2. Press [FEATURE].
3. Dial the code that designates in which situation you
want your calls forwarded:
In order to program
Dial
Call forward always
[F][L] or [3][5]
Call forward busy
[F][B] or [3][2]
Call forward no answer
[F][N] or [3][6]
4. Dial the code designating the calls you want forwarded:
24
In order to program
Dial
All calls
[A] or [2]
External calls
[E] or [3]
Internal calls
[I] or [4]
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 25 Wednesday, August 4, 1999 11:13 AM
5. Enter the new destination to which you want your calls
forwarded.
NOTE
Instead of dialing the extension number, you may
press a MEMORY button programmed with an
extension number (for internal calls only) - or press
a SPEED DIAL button (or press [SPEED DIAL]
and dial a SPEED DIAL memory bin number) for
internal or external calls, as determined by the
contents of the memory. Calls are forwarded to the
contents of the MEMORY button or SPEED DIAL
bin. If you change the contents of the SPEED DIAL
bin, calls are forwarded to the new destination.
This does not apply to the MEMORY button.
6. Hang up.
To cancel call forwarding
1. Press the DN button (if applicable) and then press
[CANCEL] or [#].
2. Press [FEATURE].
3. Dial the code that designates what type of Call forwarding you want to cancel: [3][5], [3][2], or [3][6].
4. Dial the code that designates which of your calls are
currently forwarded and for which you want to cancel
the call forwarding programming: [2], [3], or [4].
If you want to cancel call forwarding for all DNs, press
[*].
5. Hang up.
Avanti 3015 and Avanti 3000 sets
25
3015_3000txt.book Page 26 Wednesday, August 4, 1999 11:13 AM
CANCELING CALL FORWARD TO ME
If another set has programmed your telephone set as its
forwarding destination and you do not wish to be disturbed
by those calls, you can cancel your status as a call forwarding destination.
To cancel Call Forward to me
1. Press the CANCEL code [#].
2. Press [FEATURE].
3. Dial the CALL FORWARD access code [3][5].
4. Dial [8].
5. Dial the extension number whose calls you no longer
want forwarded to your set
or
Press [*] if you wish to cancel all Call Forward to me,
from all sets.
26
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 27 Wednesday, August 4, 1999 11:13 AM
ABBREVIATED DIALING
This section describes several ways of abbreviating dialing. Save/Repeat and Redial are described in Outside
Calls, above.
SPEED DIAL
Speed dial shortens the procedure of dialing outside numbers by using speed dial buttons and speed dial memories
(called “bins”).
To speed dial an outside number
• Press [SPEED DIAL] and dial the speed dial bin code
(three digits),
or
Press the appropriate SPEED DIAL button.
To program a speed dial memory code or button
1. Press [FEATURE].
2. Press [SPEED DIAL/PROGRAM].
3. Do one of the following:
Dial a speed dial bin code (three digits; e.g. 003),or
Press the SPEED DIAL button to be programmed.
4. Dial an outside line access code followed by the number you want to store.
5. Hang up.
NOTE
Pauses may be entered in a speed dial
sequence by pressing [REDIAL/PAUSE].
Avanti 3015 and Avanti 3000 sets
27
3015_3000txt.book Page 28 Wednesday, August 4, 1999 11:13 AM
MEMORY BUTTONS
Memory buttons are used for one-press dialing of extensions and feature access codes.
To dial with a MEMORY button
• Press the programmed button.
To program a MEMORY button
1. Press [FEATURE].
2. Press [PROGRAM].
3. Press the MEMORY button to be programmed.
4. Dial the desired extension number (up to four digits)
or
Press [FEATURE] and then dial the desired feature
code.
See the Feature codes table at the end of this guide.
5. Hang up.
28
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 29 Wednesday, August 4, 1999 11:13 AM
ALARM
Your telephone can sound an alarm ring at a pre-programmed time.
To program an alarm time
1. Press [FEATURE].
2. Dial the TIME ALARM access code ([8][2]).
3. Dial the four-digit alarm time (HH:MM) using the 24
hour format (e.g. 1530 for 3:30 pm).
4. Hang up.
To cancel the alarm setting
Before the alarm rings:
1. Press [#].
2. Press [FEATURE].
3. Dial the TIME ALARM access code ([8][2]).
4. Hang up.
To stop the alarm ring
• Press [SPKR] twice or lift and replace the handset.
Avanti 3015 and Avanti 3000 sets
29
3015_3000txt.book Page 30 Wednesday, August 4, 1999 11:13 AM
TELEPHONE LOCK
You can prevent people from making outside calls from
your telephone.
To lock your telephone
1. Dial the LOCK access code.
2. Dial your Executive Credit Code (see your System
Administrator).
3. Hang up.
The telephone lock dialing restrictions are in effect. The
[LOCK] button, if defined, lights.
To unlock your telephone
• Repeat the above procedure.
30
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 31 Wednesday, August 4, 1999 11:13 AM
DOOR UNIT
Your system may have a door unit equipped with an intercom and electric door latch. When a visitor presses the
doorbell, up to four system extensions ring.
When the door bell rings
If your telephone is ringing:
• Press [SPKR] or lift the handset.
If another extension is ringing:
• Dial the PAGE zone access code associated with the
door unit,
or
Press the flashing [DOOR] button, if defined.
You can now speak with the person at the door.
Opening the electric door latch
While connected to the door unit:
• Press [*].
The door latch opens.
Avanti 3015 and Avanti 3000 sets
31
3015_3000txt.book Page 32 Wednesday, August 4, 1999 11:13 AM
NOTE PAD
You can save a number of up to 16 digits during a call.
1. Press [FEATURE].
2. Press [PROGRAM] twice.
3. Dial an available speed dial memory code (three digits)
or press an available SPEED DIAL button.
4. Enter up to 16 digits.
5. Press [PROGRAM].
To dial the number saved, do a regular Speed Dial using
the Speed Dial memory code or button you used to save
the number (see Abbreviated dialing).
32
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 33 Wednesday, August 4, 1999 11:13 AM
ADVANCED FEATURES
This section lists some advanced features which you can
activate from your telephone. Details concerning the operation of these features can be found in the DIGITAL Systems Operating Instructions manual.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Account code (voluntary, reminder, forced);
Answering a second incoming call;
Background music;
Camp on;
Conference loop;
Confirmed transfer;
Dial attendant;
DISA;
Executive Credit Code (ECC) programming;
Executive intercom;
External Call Forward;
Floating buttons;
Hot line;
Intrusion;
Meet me conference;
Pick up;
Last hold;
Page transfer;
System speed dial;
Trunk patch - Retrieve trunk patch.
Avanti 3015 and Avanti 3000 sets
33
3015_3000txt.book Page 34 Wednesday, August 4, 1999 11:13 AM
FEATURE CODES
Features can be activated by pressing the [FEATURE] button and then dialing a feature access code.
The default feature codes (see next page) reflect the feature initials, using the letters on the dialpad buttons.
For example:
To access Barge In
• Press [FEATURE] followed by the dialpad buttons corresponding to the letters BI (Barge In).
That is,
FEATURE
2
4
ABC
GHI
The feature codes in your system may have been
changed. If so, enter the updated feature access codes in
the “Access method” column of the Feature codes table.
34
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 35 Wednesday, August 4, 1999 11:13 AM
Feature codes
Feature name
ACCOUNT CODE
ACD LOGIN (1)
Abbreviation Access method
AT
[FEATURE][2][8]
-
-
ACD LOGOUT (1)
-
-
ALL/GROUP
-
[*]
ATTENDANT
BACKGROUND MUSIC 1
BACKGROUND MUSIC 2-4 (1) (3)
BARGE IN
CALL ACCOUNT MONITOR (1)
-
[0]
BM
[FEATURE][2][6]
-
-
BI
[FEATURE][2][4]
-
-
CB
[FEATURE][2][2]
CALL FORWARD-ALWAYS
FL
[FEATURE][3][5]
CALL FORWARD-BUSY
FB
[FEATURE][3][2]
CALL FORWARD-NO ANSWER
CALLBACK/QUEUE
FN
[FEATURE][3][6]
CANCEL
-
[#]
CLIR (1) (2)
-
-
CONFERENCE LOOP 1-10 (1)
-
-
DIRECTORY 1 THROUGH 9 (1)
-
-
DIRECTORY 10 (HELP) (1)
-
-
DROP (from conference) (1)
-
-
END OF DIALING/SEND
-
[FEATURE][#]
EX
[FEATURE][3][9]
-
[7]
FLASH SIGNAL(1)
FS
[FEATURE][3][7]
FLIP FLOP
FF
[FEATURE][3][3]
EXECUTIVE CREDIT CODE
FEATURE
GROUP PICKUP (1)
-
-
INTRUSION
-
[6]
LAST HOLD
LH
[FEATURE][5][4]
LEAST COST ROUTING (1)
-
-
LOCK (1)
-
-
MEET ME CONFERENCE 1-5 (1)
-
-
(1) Access method not assigned by default.
(2) Only available on ISDN PRI calls.
(3) In the DIGITAL 400 up to eight; in the DIGITAL 1000 up to 24.
Not all of the above features are available on every type of telephone set.
Avanti 3015 and Avanti 3000 sets
35
3015_3000txt.book Page 36 Wednesday, August 4, 1999 11:13 AM
Feature codes (Continued)
Feature name
Abbreviation Access method
MEET ME PAGE
MM
[FEATURE][6][6]
MESSAGE
ME
[FEATURE][6][3]
-
-
NIGHT SERVICE (1)
PAGE - INTERNAL
1 through 8
PAGE - EXTERNAL
1 through 8 (1)
I1 through I8 [FEATURE][4][1]
through [4][8]
X1 through X8
-
PICKUP
PU
[FEATURE][7][8]
PROGRAM
PM
[FEATURE][7][6]
REDIAL
RL
[FEATURE][7][5]
SAVE/REPEAT
SR
[FEATURE][7][7]
SPEED DIAL
SD
[FEATURE][7][3]
TIME ALARM
TA
[FEATURE][8][2]
TONE
-
[1]
TONE DIAL (DTMF) (1)
-
-
TRAVEL COS(1)
-
-
TRUNK PATCH
TP
[FEATURE][8][7]
TRUNK SPEED DIAL (1)
-
-
VOICE MESSAGE (1)
-
-
(1) Access method not assigned by default.
(2) Only available on ISDN PRI calls.
(3) In the DIGITAL 400 up to eight; in the DIGITAL 1000 up to 24.
Not all of the above features are available on every type of telephone set.
36
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 37 Wednesday, August 4, 1999 11:13 AM
DND messages
Message number
01
Default message
Updated message
BE BACK SOON
02
BE BACK AT * * : * * (1)
03
BE BACK ON * * - * * (1)
04
OUT UNTIL * * : * * (1)
05
OUT FOR THE DAY
06
OUT OF OFFICE
07
OUT OF TOWN
08
OUT ON A CALL
09
OUT FOR LUNCH
10
ON VACATION
11
ON A TRIP
12
ON BREAK
13
AWAY FROM DESK
14
GONE HOME
15
BUSY UNTIL * * : * * (1)
16
CALL * * * * * (1)
17
CALL ME AT * * * * * (1)
18
CALL LATER
19
CALL TOMORROW
20
DO NOT DISTURB
21
IN A MEETING
22
IN CONFERENCE
23
WITH A CLIENT
24
WITH A GUEST
25
WITH A PATIENT
26
UNAVAILABLE
27
LEAVE MSG AT * * * (1)
28
TAKE MSG AT * * * * (1)
29
30
(1) When editing messages, enter digits in place of the asterisks.
Avanti 3015 and Avanti 3000 sets
37
3015_3000txt.book Page 38 Wednesday, August 4, 1999 11:13 AM
System messages
Message number
Default message
01
CALL_ (Basic message)
02
CALL * * * * * (1)
03
CALL HOME
04
CALL ME
05
GONE OUT
06
READ MAIL
07
VOICE MAIL
08
CALL BOSS
09
TAKE MSGS
10
GONE HOME
11
JOB DONE
12
IN TROUBLE
13
CLIENT
14
BRING WORK
15
ANY NEWS?
16
REPORT DUE
17
COME HERE
18
MEET. NOW
19
MEMO READY
20
TYPE LETTR
21
WELL DONE
Updated message
22 (2)
23
24
25
25
27
28
29
30
(1) When editing messages, enter digits in place of the asterisks.
(2) Messages 22 to 30 are to be defined by the customer.
38
Avanti 3015 and Avanti 3000 sets
3015_3000txt.book Page 39 Wednesday, August 4, 1999 11:13 AM
Your speed dial codes
Name
Number
Avanti 3015 and Avanti 3000 sets
Code
39