User guide | Avanti W711 Washer User Manual

IP Office
4610/5610 Phone User Guide
15-601124 Issue 05a - (16 July 2009)
© 2009 AVAYA All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of
printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document may be
incorporated in future releases.
Documentation Disclaimer
Avaya Inc. is not responsible for any modifications, additions, or deletions to the original published version of this
documentation unless such modifications, additions, or deletions were performed by Avaya.
Link Disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked Web sites referenced elsewhere within this
Documentation, and Avaya does not necessarily endorse the products, services, or information described or offered within
them. We cannot guarantee that these links will work all of the time and we have no control over the availability of the linked
pages.
License
USE OR INSTALLATION OF THE PRODUCT INDICATES THE END USER’S ACCEPTANCE OF THE TERMS SET FORTH
HEREIN AND THE GENERAL LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE AT
http://support.avaya.com/LicenseInfo/ (“GENERAL LICENSE TERMS”). IF YOU DO NOT WISH TO BE BOUND BY THESE
TERMS, YOU MUST RETURN THE PRODUCT(S) TO THE POINT OF PURCHASE WITHIN TEN (10) DAYS OF DELIVERY
FOR A REFUND OR CREDIT.
Avaya grants End User a license within the scope of the license types described below. The applicable number of licenses and
units of capacity for which the license is granted will be one (1), unless a different number of licenses or units of capacity is
specified in the Documentation or other materials available to End User. “Designated Processor” means a single stand-alone
computing device. “Server” means a Designated Processor that hosts a software application to be accessed by multiple users.
“Software” means the computer programs in object code, originally licensed by Avaya and ultimately utilized by End User,
whether as stand-alone Products or pre-installed on Hardware. “Hardware” means the standard hardware Products, originally
sold by Avaya and ultimately utilized by End User.
License Type(s): Designated System(s) License (DS).
End User may install and use each copy of the Software on only one Designated Processor, unless a different number of
Designated Processors is indicated in the Documentation or other materials available to End User. Avaya may require the
Designated Processor(s) to be identified by type, serial number, feature key, location or other specific designation, or to be
provided by End User to Avaya through electronic means established by Avaya specifically for this purpose.
Copyright
Except where expressly stated otherwise, the Product is protected by copyright and other laws respecting proprietary rights.
Unauthorized reproduction, transfer, and or use can be a criminal, as well as a civil, offense under the applicable law.
Third-Party Components
Certain software programs or portions thereof included in the Product may contain software distributed under third party
agreements (“Third Party Components”), which may contain terms that expand or limit rights to use certain portions of the
Product (“Third Party Terms”). Information identifying Third Party Components and the Third Party Terms that apply to them is
available on Avaya’s web site at: http://support.avaya.com/ThirdPartyLicense/
Avaya Fraud Intervention
If you suspect that you are being victimized by toll fraud and you need technical assistance or support, call Technical Service
Center Toll Fraud Intervention Hotline at +1-800-643-2353 for the United States and Canada. Suspected security
vulnerabilities with Avaya Products should be reported to Avaya by sending mail to: securityalerts@avaya.com.
For additional support telephone numbers, see the Avaya Support web site (http://www.avaya.com/support).
Trademarks
Avaya and the Avaya logo are registered trademarks of Avaya Inc. in the United States of America and other jurisdictions.
Unless otherwise provided in this document, marks identified by “®,” “™” and “SM” are registered marks, trademarks and
service marks, respectively, of Avaya Inc. All other trademarks are the property of their respective owners.
Documentation information
For the most current versions of documentation, go to the Avaya Support web site (http://www.avaya.com/support) or the IP
Office Knowledge Base (http://marketingtools.avaya.com/knowledgebase/).
Avaya Support
Avaya provides a telephone number for you to use to report problems or to ask questions about your contact center. The
support telephone number is 1 800 628 2888 in the United States. For additional support telephone numbers, see the Avaya
Web site: http://www.avaya.com/support.
4610/5610 Phone
IP Office
Page 2
15-601124 Issue 05a (16 July 2009)
Contents
6.7 Phone Screen
.....................................................................
on Calling
6.8 Display Call
.....................................................................
Timers
6.9 Message Display
Rate
.....................................................................
.....................................................................
6.10 Visual Alerting
Contents
1. The Telephone
1.1 Call Appearance
.....................................................................
Keys
9
.....................................................................
10
1.2 Call Appearance
Key Icons
1.3 System Features
..................................................................... 10
1.4 Logging On..................................................................... 11
1.5 Logging Off..................................................................... 11
1.6 No User ..................................................................... 12
1.7 The Display..................................................................... 12
2. Basic Call Handling Features
2.1 Answering .....................................................................
a Call
2.2 Making a Call
.....................................................................
2.3 Clearing a .....................................................................
Call
.....................................................................
2.4 Headset Working
2.5 Speakerphone
.....................................................................
2.6 Speed Dial.....................................................................
2.7 Redial
.....................................................................
.....................................................................
2.8 Mute
2.9 Hold
.....................................................................
2.10 Transfer .....................................................................
2.11 Conference
.....................................................................
14
15
15
16
17
18
18
19
19
20
21
3. Using Speed Dials
3.1 Overview of.....................................................................
Speed Dials
3.2 Dialling a Speed
.....................................................................
Dial Number
3.3 Adding a Speed
Dial from the Call Log
.....................................................................
.....................................................................
3.4 Editing a Speed
Dial
3.5 Deleting a .....................................................................
Speed Dial
3.6 Adding a New
Speed Dial
.....................................................................
24
25
25
25
25
26
43
43
43
43
7. Function Keys
7.1 Overview of.....................................................................
the Function Keys
7.2 Function Key
Programming
.....................................................................
7.3 Shorthand .....................................................................
Programming Mode
7.4 Longhand Programming
Mode
.....................................................................
46
47
49
50
8. System Features
8.1 Introduction.....................................................................
.....................................................................
8.2 Call Waiting
8.3 Call Forwarding
.....................................................................
8.4 Diverting Calls
.....................................................................
8.5 Do Not Disturb
.....................................................................
.....................................................................
8.6 Parking Calls
8.7 Private Call.....................................................................
8.8 Ring Back .....................................................................
8.9 Voicemail .....................................................................
.....................................................................
8.10 Default Feature
Codes
52
52
52
53
53
54
54
54
55
56
9. Management and Troubleshooting
9.1 Overview ..................................................................... 58
9.2 Testing Your
Phone
.....................................................................
58
.....................................................................
59
9.3 Troubleshooting
Chart
Index
...............................................................................61
4. Using the Call Log
4.1 Overview of.....................................................................
the Call Log
4.2 Accessing .....................................................................
the Call Logs
4.3 Displaying .....................................................................
an Individual Log Entry
4.4 Making a Call
from an Individual Log entry
.....................................................................
4.5 Turning a Log
.....................................................................
Entry into a Speed Dial
4.6 Deleting an.....................................................................
Individual Log Entry
4.7 Deleting All.....................................................................
Entries from a Log
4.8 Exiting the .....................................................................
Call Logs
30
31
31
31
32
32
32
32
5. Using Visual Voice
5.1 Overview of.....................................................................
Visual Voice
5.2 Listen to Voicemails
.....................................................................
5.3 Send a Voicemail
.....................................................................
5.4 Voicemail Transfer
.....................................................................
5.5 Changing Your
.....................................................................
Greeting
5.6 Changing Your
.....................................................................
Mailbox Password
5.7 Email Alerts
.....................................................................
34
35
36
36
37
37
38
6. Changing Options
6.1 Personal Ringing
.....................................................................
6.2 Viewing IP .....................................................................
Settings
6.3 Displaying .....................................................................
Contrast
6.4 Changing Key
.....................................................................
Labels
6.5 Displaying .....................................................................
Language Selection
6.6 Phone Screen
.....................................................................
on Answer
4610/5610 Phone
IP Office
40
40
41
41
42
42
Page 3
15-601124 Issue 05a (16 July 2009)
Chapter 1.
The Telephone
4610/5610 Phone
IP Office
Page 5
15-601124 Issue 05a (16 July 2009)
The Telephone:
1. The Telephone
This guide covers the use of the 4610 and 5610 phones on IP Office. These phones are physically similar, however the
5610 is only supported on the IP Office whereas the 4610 is supported on a range of Avaya phone systems.
The diagram below shows the main phone features:
1.
Display, Call Appearance and Feature Buttons:
The Call Appearance keys allow you to handle multiple calls with the display showing call information. There are 4
pages in the display; giving up to 24 system features that can be allocated to the function keys. The information
displayed varies according to the active feature.
2.
Message Waiting Lamp: Used as follows:
·
On (Continuous): There are new messages in your voicemail mailbox, or in another mailbox for which you
have been configured to receive "Message Waiting Indication".
·
Flashing: The lamp can also be set to flash when the phone receives a call. See Visual Alerting
43
.
3.
Softkeys:
Used to navigate to or initiate certain features, such as Speed Dial or Call Log, as well as control certain actions
within the features. These keys correspond to the text prompts in the display screen immediately above them.
4.
Page Right/Left:
Shifts from one page to another in the same application when the display presents the paging indicator (
buttons have no effect when the paging indicator is not displayed.
5.
Options:
Displays the Options main screen, from which display and application settings can be updated
6.
Call Handling Buttons:
·
·
·
·
·
). These
HOLD: Red button used to place a call on hold.
TRANSFER: Transfers a call to another phone.
CONFERENCE: Sets up conference calls with more than one other person.
DROP: Drops the current call or, if on a conference call, drops the last person to join the conference.
REDIAL: Redials the last number dialed or displays the last 6 numbers dialed from the phone, depending
on configuration via the Options menu.
7.
Numeric (dialling) Pad:
Standard 12 button pad for dialling phone numbers.
8.
Volume Controls:
Adjusts the handset, speaker, headset, or ringer volume, depending on which item is in use. As you increase or
decrease the volume, the top display area provides either a speaker, headset, handset, or ringer icon to indicate for
which item you are adjusting volume, followed by a visual “volume meter” showing the volume level. These buttons
also control the volume of the key click sounds made when you press fixed buttons on the phone, such as the dial
pad or soft keys.
9.
MUTE:
4610/5610 Phone
IP Office
Page 7
15-601124 Issue 05a (16 July 2009)
Turns off the active speaker, handset, or headset microphone to prevent the other person from hearing you. The
associated LED lights steadily when the handset or headset is muted.
10.
HEADSET:
With a headset connected, changes audio control from the handset or speaker to the headset. The associated LED
lights steadily when the headset is active.
11. Headset Jack:
Located on the side of the phone and provides a port for connecting a headset.
12.
SPEAKER:
Access the speakerphone. The light associated with this button turns on when the speakerphone is active. Note that
while the speakerphone is active the handset is muted.
13.
PHONE/EXIT:
Displays the phone application main screen or, if applicable, exits the current IP Office based feature, such as Speed
Dial or Call Log, and normalizes the display.
4610/5610 Phone
IP Office
Page 8
15-601124 Issue 05a (16 July 2009)
The Telephone:
1.1 Call Appearance Keys
Normally, the first page of the main call handling screen contains three keys set as 'call appearance' keys. These are
allocated to you by your system administrator and are indicated as a=, b= and c=.
Your system administrator can allocate a call appearance key with:
·
A Bridged Appearance
A bridged appearance key matches the status and operation of the Call Appearance key on a pre-defined colleague’s
phone. Hence, you can pick-up, make and receive calls on behalf of your colleague.
·
A Line Appearance
An IP Office exchange line (but not IP lines) can be allocated to you such that the status of that line is displayed and
you can use the line appearance key to make and receive calls.
Call Coverage Appearance
A call coverage appearance key alerts you when a pre-defined colleague is receiving a call. The covered user does
not need to be using call appearance keys. Hence, you can pick-up calls on behalf of your colleague.
For details of Bridged, Line and Call Coverage Appearance Keys set-up and their operation, refer the IP Office Key and
Lamp Operation manual.
·
Having more than two Call Appearance keys is very useful. When holding a call, you can answer or make another call and
then switch between calls, transfer or conference. If you are set to receive call waiting indication, the waiting call is
shown against the next call appearance key.
Note
·
If your phone is operating in single line mode, call appearance keys are not available.
Caution
·
Although the system administrator can replace the Call Appearance keys with Bridged, Line and Call Coverage
Appearance keys, this would severely restrict the use of features such as conference and transfer.
It is for this reason that it is strongly recommended that all Call Appearance keys remain at their default
settings.
4610/5610 Phone
IP Office
Page 9
15-601124 Issue 05a (16 July 2009)
1.2 Call Appearance Key Icons
The icons displayed against the Call Appearance/Feature keys allow you to determine the status (for example, on HOLD)
of each call. Icons also indicate whether a feature has been activated for a particular button.
·
Incoming Call:
A symbol next to a call appearance key indicates an incoming call. To answer the call and put any other current
call on hold, press the adjacent
.
·
Connected:
A symbol next to a call appearance key indicates that it is the currently connected call. The caller's phone number
. An H is displayed.
(if available) is also shown. To put the call on hold, press the adjacent
·
On HOLD:
A
symbol next to a call appearance key indicates a call on hold. To take the call off hold and put any other
.
current call on hold, press the adjacent
·
Function Active:
The feature is highlighted on the display.
1.3 System Features
System Features can only be set against soft function keys by your system administrator. However, your system
administrator may allocate you two ‘self administrator’ features that will enable you to add System Features to your soft
function keys. Refer to Overview of the Function Keys 46 for details of the System Feature that can only be allocated
to you by your system administrator.
In addition, there are a number of System Features that you can always access yourself by the use of short codes.
Refer to System Features Introduction 52 for details of System Features that you can always access yourself by
dialling short codes. For example, to listen to your voicemail messages, dial *17.
4610/5610 Phone
IP Office
Page 10
15-601124 Issue 05a (16 July 2009)
The Telephone: System Features
1.4 Logging On
Your administrator has created your initial configuration so that you will be automatically logged on to your home
extension. However, you may be required to log in for the following reasons:
·
Forced login - if your configuration does not allow automatic login to your home extension.
·
To use an extension other than your own (hot desking)
·
If you, or somebody else, has logged you out of your extension.
Note
·
When hot desking, any short codes you have setup on your home extension will be passed to the extension you have
logged on to.
·
Certain information such as speed-dials and call log are telephone model dependent, and will not be passed to the
new extension.
·
You will be able to hot desk to extensions on remote sites only if the Small Community Advanced Networking License
is installed on that system.
To login to your home extension (forced login), enter *35*P#, where 'P' is your login code.
To login at another extension (hot desking), enter *35*N*P#, where 'N' is your home extension number and 'P' is your
login code.
Note
·
Your login code, if configured, will be supplied by your Administrator.
·
You have 4 attempts at logging on. If you fail to logon correctly, the message "Invalid" will be shown on the main
display and you will hear the busy tone. If you fail all 4 attempts to log on, you must wait 90 seconds before any
login will be accepted, whether correct or not.
1.5 Logging Off
If you have been allocated a login code, you can log your phone off to prevent unauthorized use during an absence, or
for privacy purposes.
If you are logging off from another extension, the system will log you back in at your home extension, unless the forcelogin option is set.
Caution
·
Call Log entries and certain Speed Dial settings will remain on the extension even once you are logged out.
To log your phone off:
1.
Press
Options.
2.
Press
and then press
3.
To un-register your phone from the IP Office, delete all Call Log entries and returns any options you may have
configured to their default values, press
Yes.
4.
To return to the Option menu, press
options values remain unchanged.
Log off.
No. Your phone remains logged on to the network and your Call Log and
To log back on:
·
The display will show Ext.=xxx in the top row. Press # and enter your password (consult your system
administrator).
4610/5610 Phone
IP Office
Page 11
15-601124 Issue 05a (16 July 2009)
1.6 No User
The NoUser configuration will be used for extensions where the home user is not currently logged on, for example:
·
The home user is logged on to another extension
·
Forced login is enabled
An extension set as NoUser will display the name "NoUser" and the extension number.
If required, and you have been allocated a login code, you can logon using your extension number and login code. (see
Logging On 11 )
Note
·
Although internal calls may be made from an extension marked NoUser, normally calls cannot be received on that
extension.
1.7 The Display
B
Phone Locked:
Internal calls only.
D
Call Forwarding On:
See Call Forwarding 52 .
G
In Group:
You can enable/disable group membership.
H
Held Call:
Shows the number of held calls. See HOLD
N
NoUser
19
.
Do Not Disturb On:
See Do Not Disturb 53 .
No User:
The extension is not currently logged on. see No User
12
O
Out of Hours:
This is displayed if one or more Hunt Groups is in "Out-of-Hours" mode.
P
Parked Calls:
Shows the number of parked calls.
T
Twinned:
The phone is being used as the twin of another phone.
DISC
Disconnected:
To end the call, press
SPEAKER or replace the handset.
CONN
Connected:
You are on a call.
CONF
CONFERENCE Call:
You are part of a conference call, displayed on the left hand side of the display. See Conference Calls
HELD
HELD:
You have been put on hold by the connected party.
ssss
Suppressed Code
When an account code is entered, the number you enter is displayed as "ssss" for security purposes.
4610/5610 Phone
IP Office
21
.
Page 12
15-601124 Issue 05a (16 July 2009)
Chapter 2.
Basic Call Handling Features
4610/5610 Phone
IP Office
Page 13
15-601124 Issue 05a (16 July 2009)
2. Basic Call Handling Features
2.1 Answering a Call
When a call arrives at your phone, you may hear a ringing tone and a blinking bell icon ( ) icon appears against the
associated call appearance key.
To answer calls at your own extension:
Do one of the following:
·
If you are not active on another call, answer the call using your handset, headset, or speakerphone. See
Speakerphone 17 .
·
If you are active on a call already, place the active call on hold (see Hold
selecting the associated call appearance key.
·
If the call appearance for the ringing call is not displayed on the current screen page, press
PHONE/EXIT to
return to the first page of the Home screen. When you locate the call appearance for the ringing call, press the
corresponding call appearance button.
19
), and then answer the incoming call by
To answer a call at another extension:
You can answer from your own phone by using Call Pick-Up; lift your handset and dial:
·
*30 to answer a call ringing anywhere.
·
*31 to answer a call within your group.
·
*32*201# to answer the call for a particular extension, in this example 201.
The default ring cadences are:
·
Internal calls - single ring cadence.
·
External calls - double ring cadence.
Notes
·
If your phone rings for any longer than a specified period (15 seconds in default), any re-direction feature that you
have activated, such as voicemail or call forwarding, will come into effect.
·
To redirect an incoming call, press
available).
4610/5610 Phone
IP Office
DROP to redirect the call to Forward On No Answer (if set) or voicemail (if
Page 14
15-601124 Issue 05a (16 July 2009)
Basic Call Handling Features: Answering a Call
2.2 Making a Call
You can make calls from the phone using a variety of methods as follows:
To manually make a call:
1.
Dial the required number on the key pad. Remember to include the required access code (for example; 9 for an
outside line) and listen to the progress of the call.
2.
Adjust the speakerphone volume as necessary. To change the volume, press
are displayed.
3.
If the call is not answered, press
SPEAKER or press
and
. The eight volume levels
DROP.
When the call is answered, either speak or pick up the handset and speak to the called party.
To automatically make a call:
Do any of the following:
·
To have the phone dial the last number that you dialed, press
REDIAL and then press
.
·
Access the Call Log and initiate a call to a specific entry.
·
Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See Dialling a Speed Dial
Number 25 .
When the call is answered, either speak or pick up the handset and speak to the called party.
2.3 Clearing a Call
To clear an established call:
Either
·
Replace the handset.
or
·
Press
DROP.
4610/5610 Phone
IP Office
Page 15
15-601124 Issue 05a (16 July 2009)
2.4 Headset Working
When a headset is to be used on your phone, it must be plugged in to the headset socket on the base of the phone. To
activate the headset and switch off the handset, press
HEADSET. The lamp beside the button is illuminated when
headset working is activated.
To answer an incoming call:
·
Press
HEADSET.
If you are already on a call:
1.
Place the first call on hold
2.
Press
next to the flashing bell icon ( ).
To clear a headset call:
·
Press
DROP.
To manually make a call:
·
Press
HEADSET.
·
Dial the number. Remember to include the required access code (for example; 9 for an outside line) and listen to the
progress of the call.
To automatically make a call:
·
Press
HEADSET.
Then do any of the following:
·
To have the phone dial the last number that you dialed, press
·
Access the Call Log and initiate a call to a specific entry.
REDIAL and then press
.
Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See Dialling a Speed Dial
Number 25 .
When the call is answered, speak to the called party.
·
4610/5610 Phone
IP Office
Page 16
15-601124 Issue 05a (16 July 2009)
Basic Call Handling Features: Headset Working
2.5 Speakerphone
The built-in two-way speakerphone allows you to make and answer calls without lifting your handset. Speakerphones
may not operate satisfactorily in every environment; such as in noisy locations. Note that while the speakerphone is in
use the handset is muted.
To make or answer a call without lifting the handset, or to use the speakerphone with any feature:
1.
Press
SPEAKER. The LED beside the button illuminates.
2.
Make or answer the call, or access the selected feature.
3.
Adjust the speakerphone volume if necessary. To change the volume, press
volume levels.
and
. The display shows the eight
To change from the speakerphone to the handset:
·
Pick up the handset and talk.
To change from the handset to the speakerphone:
1.
Press
2.
Hang up the handset.
SPEAKER. The LED beside the button illuminates.
To end a speakerphone call:
·
Press
SPEAKER again. The LED beside the button goes out.
4610/5610 Phone
IP Office
Page 17
15-601124 Issue 05a (16 July 2009)
2.6 Speed Dial
The Speed Dial feature allows you to have the phone automatically dial calls to phone numbers stored in your personal
directory. See Dialling a Speed Dial Number 25 .
To make a call to a personal directory entry using the Speed Dial feature:
1.
From the Home screen, press
SpDial. The Speed Dial screen is displayed.
2.
Press the button next to the entry you want to call.
3.
If the entry you want is not displayed, press
and
to search through the entries or key the first letter of the
required name to jump to the page with a matching entry.
The phone dials the number for you.
2.7 Redial
The Redial feature automatically redials a previously dialed extension or outside number (up to 24 digits). If you have
dialed the same number twice in succession, it will only have one appearance in the redial list.
To redial a previously dialed number:
·
Press
REDIAL; up to three numbers are shown. Press the
adjacent to the required number.
To redial the last dialed number:
·
Press
REDIAL twice.
To change REDIAL:
OPTIONS and then press
Application Options.
1.
Press
2.
Press
REDIAL. It will toggle between Last Number and Last 3 Numbers.
3.
Press
Save.
4610/5610 Phone
IP Office
Page 18
15-601124 Issue 05a (16 July 2009)
Basic Call Handling Features: Redial
2.8 Mute
During an active call, the Mute feature prevents the party with whom you are speaking from hearing you. This feature is
most commonly used in conjunction with the Speakerphone, but can be used to hold an off-line conversation at any time
during a call.
To prevent the other person on the line from hearing you:
1.
Press
active.
MUTE. The other party cannot hear you. The indicator next to the
2.
To reinstate two-way conversation, press
MUTE button lights when mute is
MUTE again.
2.9 Hold
If, with a call in progress, a second call arrives and is shown against a Call Appearance key, you can then hold the first
call and answer the second call.
To put an existing call on hold:
1.
Press
HOLD or press
with
2.
To answer the second call, press
against it.
with
changes to
against it.
; showing that the line is on hold.
changes to
; showing that the line is connected.
To return to the held call:
1.
If you have a call in progress, then first put that call on hold (as above).
2.
To retrieve a held call, press
with
against it.
Notes
·
After a pre-set time (defined by your system administrator), you are reminded that you have a call on hold by
changing for a few moments to and the phone ringing.
·
If the system feature AutoHOLD is on (consult your system administrator) then you can hold an active call ( ) by
pressing the second call’s Call Appearance button ( ). If AutoHold is off, then pressing the second call’s Call
Appearance button ( ) will drop the first call.
·
To transfer a held call see Transfer
4610/5610 Phone
IP Office
20
.
Page 19
15-601124 Issue 05a (16 July 2009)
2.10 Transfer
This feature allows you to transfer a call from your phone to another extension or outside number.
1. With a call in progress, press
TRANSFER.
2. When you hear dial tone, dial the number to which the call is to be transferred. Then do one of the following:
· To transfer the call without announcing it (an unsupervised transfer), press
transfer is complete.
TRANSFER again. The
· To announce the call before transferring it (a supervised transfer), wait for the called party to answer:
· If the called party is willing to accept the call, press
TRANSFER again to complete the transfer.
· If the called party does not wish to accept the call or there is no answer, press
the held call, press
adjacent to it.
4610/5610 Phone
IP Office
DROP. To return to
Page 20
15-601124 Issue 05a (16 July 2009)
Basic Call Handling Features: Transfer
2.11 Conference
The Conference feature allows you to conference other parties (including yourself) into a call.
Notes
·
The number of parties allowed in a conference is controlled by your phone system.
·
Two Call Appearance keys are required for the conference feature.
To add another party to a call:
1.
With a call in progress, press
2.
Dial the number of the person you want to add to the call.
3.
Wait for an answer.
If the called party does not answer or does not want to join the conference, press
call, press
adjacent to the held call.
CONFERENCE. The existing call is put on hold.
DROP. To return to the held
CONFERENCE again.
4.
To add the person to the call, press
5.
Repeat steps 1 through 4 for additional conference connections.
To see the details of the different callers in the conference, press
and
Prev/Next.
Notes
·
To leave the conference, hang up.
·
To display, and then select which participants to drop from the conference, us Prev/Next as above, then press
DROP.
4610/5610 Phone
IP Office
Page 21
15-601124 Issue 05a (16 July 2009)
Chapter 3.
Using Speed Dials
4610/5610 Phone
IP Office
Page 23
15-601124 Issue 05a (16 July 2009)
3. Using Speed Dials
3.1 Overview of Speed Dials
The phone can store up to 48 personal speed dials. Press
·
The speed dials are sorted alphabetically.
·
To dial a speed dial number stored, press
·
The
or
SpDial, to display a screen similar to the following:
adjacent to a name.
symbol indicates that there are more pages. To move between pages, press
To add a new speed dial, press
Add. See Adding a New Speed Dial
To display an existing speed dial and edit current settings, press
26
or
.
.
Edit. See Editing a Speed Dial
25
.
Note
·
Speed dials can be used for any numbers that can be manually dialed from the extension. Where, for external calls,
a dialling prefix is required then that prefix must be part of the speed dial number.
4610/5610 Phone
IP Office
Page 24
15-601124 Issue 05a (16 July 2009)
Using Speed Dials: Overview of Speed Dials
3.2 Dialling a Speed Dial Number
You can use the speed dial directory to make a call with the handset on hook or off hook.
To dial a speed dial number:
1.
To display the speed dial directory, press
SpDial.
2.
The
3.
When the speed dial required is shown on the screen, press
symbol is shown if there is more than one page of speed dials. To move between pages, press
or
and
.
adjacent to the speed dial name.
3.3 Adding a Speed Dial from the Call Log
You can create a new speed dial from a call log entry. See Saving a Call Log Entry to Your Speed Dial List 32 . This
process will start the normal speed entry screen but pre-filled with the name and number from the call log entry.
3.4 Editing a Speed Dial
To edit a speed dial:
1.
Press
SpDial and then press
Edit.
2.
Select the speed dial entry you want to edit. To display different pages of speed dials, press
3.
When the required entry is displayed, press the adjacent
4.
Edit the speed dial using the same methods as for adding a new speed dial. See Adding a New Speed Dial
5.
To return to the speed dial list, press
or
and
.
.
26
.
Save.
3.5 Deleting a Speed Dial
To delete a speed dial:
1.
Press
2.
Select the speed dial entry you want to delete. To display different pages of speed dials, press
SpDial and then press
Delete.
3.
Press
4.
Select another entry to delete or to return to the speed dial list, press
Delete again or to exit without deleting, press
4610/5610 Phone
IP Office
and
.
Cancel.
PHONE/EXIT.
Page 25
15-601124 Issue 05a (16 July 2009)
3.6 Adding a New Speed Dial
To add a new speed dial:
1.
Press
SpDial and then press
Add. If a message stating that the speed dial list is full appears, you must
first delete an existing entry before adding a new entry. See Deleting a Speed Dial 25 .
2.
The cursor, a | symbol, is initially in the empty name field.
3.
Begin entering text using the phone keypad. Each key is marked with the letters it provides. You may have to press
the key more than once depending on the character you require.
4.
·
For example, the key 2 is also marked as A, B and C. To enter a C, press 2 until C is displayed.
·
To enter the next character from the same key, e.g. a, press
character or simply press another key.
·
If you make a mistake, use
to move the cursor to the right of the incorrect character and then use
Backspace to delete it or to delete the last character entered, press
Backspace.
to move the cursor right and then enter the
As you enter Name characters you can use a number of other controls:
·
Case: Change the case of the current character between upper and lower case.
·
Moves the cursor right one character.
·
·
Moves the cursor left one character
Clear: Delete the whole name.
·
·
Backspace: Delete the character to the left of the cursor.
Symbol: provides access to the following symbols:Period (.), Comma (,), Hyphen (-), Space (inserts a
space between characters), Slash (/) or Apostrophe (').
·
Save: Save the speed dial changes.
·
Cancel: Return back to the speed dial directory without making any changes.
5.
When the Name has been entered, press
6.
The Number menu is displayed. Enter the required number, including any external line access digit (for example;
9):
·
Done.
If you make a mistake, use
to move the cursor to the right of the incorrect number and then use
Backspace to delete it or press
Backspace to delete the last number entered.
4610/5610 Phone
IP Office
Page 26
15-601124 Issue 05a (16 July 2009)
Using Speed Dials: Adding a New Speed Dial
7.
As you enter Number characters you can use other controls:
·
Moves the cursor right one character.
·
Moves the cursor left one character
·
Clear: Delete the whole name.
·
Backspace: Delete the character to the left of the cursor.
·
·
Symbol provides access to the following symbols: Period (.), Comma (,), Hyphen (-), Space (inserts a
space between characters), Slash (/) or Apostrophe (').
Save: Save the speed dial changes.
Cancel: Return back to the speed dial directory without making any changes.
·
Note
·
8.
The controls on this screen are context sensitive, i.e. they only appear when applicable. For example; Save only
appears when both a name and number have been entered.
When the Number has been entered, press
4610/5610 Phone
IP Office
Save.
Page 27
15-601124 Issue 05a (16 July 2009)
Chapter 4.
Using the Call Log
4610/5610 Phone
IP Office
Page 29
15-601124 Issue 05a (16 July 2009)
4. Using the Call Log
4.1 Overview of the Call Log
The phone maintains a call log. To access, press
Log.
The call logs keeps logs of missed calls, outgoing calls made and incoming calls answered. Each of these logs includes the
30 most recent calls in its category. A screen similar to the following is displayed:
·
The name of the called or calling party if available.
·
The number of the called or calling party.
·
The time of the call.
·
The date of the call if prior to the current day.
·
The
symbol indicates that the log contain more pages of entries. To move between pages, press
and
.
Note
·
Only outgoing calls made using the dial pad or a SpDial entry are logged.
To display full details of a log entry, press
or
adjacent to a log entry.
Each individual log entry includes details similar to the following:
· The number of the called or calling party.
· The time of the call.
· The date of the call.
· The duration of the call for outgoing and answered calls (not shown above for missed calls).
Apart from using the call logs for information, you can turn a call log entry into a speed dial for future calls. You can also
delete individual log entries or the all entries in a particular log.
Caution
·
Call log entries are lost whenever the phone system or the individual phone are reset.
4610/5610 Phone
IP Office
Page 30
15-601124 Issue 05a (16 July 2009)
Using the Call Log: Overview of the Call Log
4.2 Accessing the Call Logs
To access the call logs:
1.
Press
2.
The call log always opens in the
·
3.
Log.
Missed calls log.
Missed:
The log of calls that rang your extension but were not answered. This includes calls that were diverted to
voicemail or another number after ringing your extension.
To select the log required type press either:
· InAns:
The log of incoming calls that were answered. This includes both internal and external calls.
· Outgo:
The log of calls made. This includes both internal and external calls.
4.
If the selected log contains more than one page of entries, the
.
is shown. To move between pages, press
and
4.3 Displaying an Individual Log Entry
To display an individual log entry:
1.
Locate the log entry in which you are interested from
2.
Press
3.
To return to the call log, press
or
Missed,
InAns or
Outgo.
InAns or
Outgo.
adjacent to the entry. The log entry details are shown.
Return.
4.4 Making a Call from an Individual Log entry
To make a call from an individual log entry:
1.
Locate the log entry in which you are interested from
2.
Press
3.
To make the call, press
or
Missed,
adjacent to the entry. The log entry details are shown.
Call.
If the number shown is external but does not include the external dialling prefix used by your phone system, go offhook, dial the prefix and then press
Call.
4610/5610 Phone
IP Office
Page 31
15-601124 Issue 05a (16 July 2009)
4.5 Turning a Log Entry into a Speed Dial
To turn a log entry into a speed dial:
1.
Locate the log entry in which you are interested from
2.
Press
3.
Press
Add to SD. The screens for editing and adding speed dials will appear, pre-filled with the information
from the log entry. Edit the details if required (see Adding a New Speed Dial 26 ).
4.
Press
or
Missed,
InAns or
Outgo.
adjacent to the entry.
Save or
Cancel.
You will be returned to the speed dial selection menu.
4.6 Deleting an Individual Log Entry
To delete an individual log entry:
1.
Press
Log.
2.
Locate the log entry in which you are interested from
3.
Press the key adjacent to it.
4.
Press
Missed,
InAns or
Outgo.
Delete twice.
To return to the call log without deleting the log entry, press
Cancel.
4.7 Deleting All Entries from a Log
To delete all entries from a log:
Log.
1.
Press
2.
To select the log, press
3.
Press
4.
To delete the log entries, select
Delete.
To return to the call log without deleting the log entries, press
Missed,
InAns or
Outgo.
DeleteAll.
Cancel.
4.8 Exiting the Call Logs
·
Press
PHONE/EXIT.
4610/5610 Phone
IP Office
Page 32
15-601124 Issue 05a (16 July 2009)
Chapter 5.
Using Visual Voice
4610/5610 Phone
IP Office
Page 33
15-601124 Issue 05a (16 July 2009)
5. Using Visual Voice
5.1 Overview of Visual Voice
Visual Voice gives you access to your mailbox using softkeys and, by using the associated feature keys, a more userfriendly option control.
Visual Voice is accessed by pressing
Voice and then selecting from the displayed options:
·
Listen - You can have direct access to your voicemail.
·
Message - You can leave a message directly in a mailbox you specify.
·
Greeting - You can listen to, change or delete your greeting message.
·
Password - You can change your voicemail password
·
Email - You can view or change your email alert status;
·
<Group> - You can have direct access to voicemails for any group you are a member of; if you are the Group
Mailbox Administrator.
Note
·
The email option is only available if VoiceMail Pro is installed, and Voicemail Email has been configured for you.
4610/5610 Phone
IP Office
Page 34
15-601124 Issue 05a (16 July 2009)
Using Visual Voice: Overview of Visual Voice
5.2 Listen to Voicemails
To listen to your Voicemails or your Group Voicemails:
1.
Press
Voice.
2.
Press
(25).
Listen (for your messages) or
3.
When prompted, key in the password. If your extension has been configured as a trusted source, the password will
not be required.
Note - If you do not have the required password, contact your administrator.
<group name> (for your hunt group messages),for example, Sales
You will be presented with the following message categories for your messages:
4.
·
New (5)
·
Old (7)
·
Saved (13)
Note - The total number of messages in each category is displayed in brackets.
Use the feature key to select the category, for example
New.
The first message in the selected category will play; and the following message handling feature key options are
displayed:
·
Next - Plays next message.
·
<<
- rewinds current message by 5 sec
·
>>
– fast forwards current message by 5 sec
·
Pause- pauses the current message/resumes playing
·
Delete - Delete the current message.
·
Save - Change the current message's category to 'saved'
·
Previous – Plays previous message
·
Copy- Copy the message to another mailbox or mailboxes. If selecting more than one mailbox, the entries must be
separated with a #.
To add a covering message to the copied voicemail:
1.
Press
Copy, and add the recipients. The feature keys change to the copy options.
2.
Press
Pre-Rec
3.
Record your message
4.
Press
Stop
5.
Press
Listen to check your message. You can change the message by selecting Pre-Rec again.
6.
Press
Send.
Note
·
Depending on the number of feature keys available, you may need to use the scrolling facility to see all of the
options.
4610/5610 Phone
IP Office
Page 35
15-601124 Issue 05a (16 July 2009)
5.3 Send a Voicemail
To send a message to another person or Group:
1.
Press
Voice.
2.
Press
Message and dial the extension of the person or Group.
3.
Press
Message again. The soft-key Record is displayed.
4.
Press
Record. The Stop soft-key is displayed.
5.
Record your message and when finished, press
Stop.
After recording your message, the following soft-key options are displayed:
·
Record - Re-record your message.
·
Listen - Listen to the message you just recorded.
·
Others - Add other recipients; each entry separated by a #. Then press
·
Submit - Submit (send) the message.
When you have submitted your message, press
Done.
PHONE/ EXIT to return to the main display.
5.4 Voicemail Transfer
You can transfer a call to another user's mailbox.
To transfer the call to another mailbox:
Voice.
1.
Press
2.
Key in the user's extension number.
3. Press
Vmail Transfer.
The call will be transferred directly to the users mailbox; the extension is not alerted.
4610/5610 Phone
IP Office
Page 36
15-601124 Issue 05a (16 July 2009)
Using Visual Voice: Voicemail Transfer
5.5 Changing Your Greeting
You can listen to, change and save your current greeting.
Note
·
Visual Voice only modifies your Personal Greeting for All Calls.
To change your mailbox greeting:
1.
2.
Press
Voice.
Press
Greeting. The following options are then displayed on the soft-keys.
·
Record - starts recording.
·
Listen - to hear your current greeting.
·
Submit - saves the new greeting.
·
Delete - deletes your current greeting.
To listen to your current Greeting:
1.
Press
Listen.
To Record a new Greeting:
1.
Press
Record. The Stop soft-key is then displayed.
2.
Record your Greeting and then press
3.
Press
Listen to hear the message you have just recorded; re-record if you are not satisfied with the Greeting.
4.
Press
Submit to save the new Greeting.
5.
Press
Stop.
PHONE/EXIT to return to the main display.
5.6 Changing Your Mailbox Password
Note
·
When changing your mailbox password it is advisable not to use sequential numbers (1234, 6789, 8765, etc.) or
existing extension numbers.
To change your Mailbox password:
1.
Press
Voice.
2.
Press
Password.
3.
When prompted, key in your new password (minimum of 4 digits) and press
Done.
The display will exit to the main display if the change was accepted. Otherwise you will be prompted to try again.
4610/5610 Phone
IP Office
Page 37
15-601124 Issue 05a (16 July 2009)
5.7 Email Alerts
The Email option is displayed if:
·
You have Voicemail pro installed
and
·
Voicemail Email has been configured for you.
To view or change the current email alert status:
1.
Press
2.
Email. You will be prompted for your current voicemail password.
Press
The current voicemail email alert status is shown along with Change and Done soft-keys.
3.
Select either:
Done - To exit leaving the current alert status active
Change - To change the status.
Voice.
Note - The
4.
Chose one of the following status:
·
OFF - No email alerts are sent.
·
COPY - An email alert is sent with a copy of the voicemail attached.
·
·
5.
Change soft-key will toggle through the alert status, beginning with the current status.
FWD - An email alert is sent with a copy of the voicemail attached. The original voicemail is deleted from
your voicemail mailbox.
ALERT- An email alert is sent when there is a new voicemail.
When you have made you selection, press
4610/5610 Phone
IP Office
Done
Page 38
15-601124 Issue 05a (16 July 2009)
Chapter 6.
Changing Options
4610/5610 Phone
IP Office
Page 39
15-601124 Issue 05a (16 July 2009)
6. Changing Options
6.1 Personal Ringing
The IP Office uses 'distinctive ringing' for different types of calls:
·
A repeated single ring for internal calls.
·
A repeated double ring for external calls.
·
A single ring followed by two short rings for ringback calls.
These options are fixed by the IP Office. You can personalize your phone's ringer sound so that you can recognize it from
other ringing phones.
To select a personal ring:
1.
Press
OPTIONS.
2.
Press
and then press
Personal Ringing. A menu with the current ring pattern appears. This alters the tone
and style of ringing used by the phone, the ring pattern is still controlled by IP Office according to the call type.
3.
To select a ringing pattern, press Pattern 1 to 8. The selected ringing pattern is heard.
4.
When you have selected a ringing pattern, press
options menu.
5.
If you want to return to the options menu without changing the ring pattern, press
Save. You will hear a confirmation tone and be returned to the
Cancel.
6.2 Viewing IP Settings
Views of phone and system information are available from the IP settings screen. You do not normally need to view this
information, however your system administrator may ask you to report certain values from any of the status screens in
the event of problems.
The status screen data can be viewed, but cannot be changed from your phone.
To view IP settings:
OPTIONS and then press
1.
Press
2.
There are two pages of display. Press
3.
View IP Settings.
and
and select from:
·
IP Address Settings
IP (Internet Protocol) address information identifies certain components and connections. The IP address
information includes the location (address) of your phone on the IP Office unit, the location and port
(connection) of the IP Office itself, the call routing and mask addresses, and the identification of the File Server
with which your phone interacts. Although technical in nature, having this information available and knowing
how to get to it can assist your system administrator in tracking questions about or problems with phone
functions or connections.
·
Quality of Service (QoS) Information
QoS refers to a number of mechanisms used to improve audio quality over the network.
·
Phone Interface
Your phone interfaces with several system hardware devices and software. This screen provides information
about three of the main interfaces.
·
Miscellaneous Information
The miscellaneous status screens provide additional information about your phone and its connections.
To return to the first View IP Settings screen, press
4610/5610 Phone
IP Office
Return.
Page 40
15-601124 Issue 05a (16 July 2009)
Changing Options: Viewing IP Settings
6.3 Displaying Contrast
You can adjust the contrast level on the phone display. You can choose from among fifteen levels of contrast.
To adjust the contrast level:
1.
Press
OPTIONS.
and then press
2.
Press
3.
To adjust the level of contrast, press
Contrast Control.
4.
When the contrast is set as required, either:
or
.
·
To save and return to the options menu, press
·
To return to the options menu, press
Cancel.
Cancel.
6.4 Changing Key Labels
This feature can be used to edit and change the text label shown next to buttons.
To change the feature key labels:
Press
OPTIONS.
2.
Press
and then press
3.
Select from:
1.
Feature Button Labeling.
·
Relabel feature buttons: proceed from next step:
·
View Default labels
·
Restore default labels: restores any previously renamed feature labels to their default state.
4.
Select the function key whose label you wish to change. The display will change to show the editing menu with New:
highlighted.
5.
Begin by entering the new text using the phone keypad. Each key is marked with the letters and number it provides.
You may have to press the key more than once depending on the character you require. For example:
·
The key 3 is also marked as D, E and F. To enter a D, press 3.
·
If the next character you want to enter is on the same key, press
the character. Alternatively, key the next character.
·
By default, the first letter is entered in upper-case and the phone then switches to lower-case entry mode. To
change the case of the current character, press
Case.
·
To enter a space, press
·
If you make a mistake, press
·
If you have make a mistake in the middle of the text, press
delete the character to the left of the cursor.
·
To delete the complete entry, press
·
You can also enter an Apostrophe, Hyphen or Comma as required.
Space.
Backspace to delete the character to the left of the cursor.
to backspace and then press
Backspace to
Clear.
6.
When the new name is set as required, press
7.
To return to the Label screen without saving the changes, press
press
Return.
8.
To return to the Call Handling screen without saving the changes, press
4610/5610 Phone
IP Office
to move the cursor right and then enter
Save.
Cancel. To return the main Options menu,
PHONE/EXIT.
Page 41
15-601124 Issue 05a (16 July 2009)
6.5 Displaying Language Selection
When the phone is first installed, it is set to display screen text in English. You can select the language that you would
prefer from the following: English, German (Deutsch), French (Français), Spanish (Español), Italian (Italiano), Dutch
(Nederlands), Portuguese (Português) or Japanese (Katakana characters).
Note
·
This does not alter your user language setting on the phone system.
To change the language:
1.
Press
OPTIONS.
2.
Press
and then press
3.
To search for the language required, press
or
the same message in the new language below.
4.
Do one of the following:
Select display language. A menu listing the available languages appears.
. You are asked in the original language “Are you sure?” with
·
To return to the options menu without saving any changes, press
·
To save the settings and return to the options menu, press
the selected language).
Return.
Yes (which is displayed in both the original and
6.6 Phone Screen on Answer
This action controls the phone screen display when the phone is answered.
When the Phone Screen on Answer? option is set to Yes, the phone screen appears in the display area when you
answer a call, regardless of the screen you were working with at that time. You will lose any unsaved work in progress on
that screen (for example, labeling a Speed Dial button), except for the Web Access application (which “remembers” the
current web screen).
When the Phone Screen on Answer? option is set to No (the default setting), answering an incoming call has no
impact on the application screen displayed, although the top display line will provide an appropriate message.
To change Phone Screen on Answer:
OPTIONS and then press
Application Options.
1.
Press
2.
Press
3.
Press
Save. To restore the previous setting without changing it, press
the first Options main screen is displayed.
Phone Screen on Answer. It will toggle between Yes and No.
4610/5610 Phone
IP Office
Cancel. After saving or canceling,
Page 42
15-601124 Issue 05a (16 July 2009)
Changing Options: Phone Screen on Answer
6.7 Phone Screen on Calling
This action controls the phone screen display when the phone is answered.
When the Phone Screen on Answer? option is set to Yes (the default setting), the phone screen appears in the display
area when you answer a call, regardless of the screen you were working with at that time. You will lose any unsaved
work in progress on that screen (for example, labeling a Speed Dial button).
When the Phone Screen on Answer? option is set to No answering an incoming call has no impact on the application
screen displayed, although the top display line will provide an appropriate message.
To change Phone Screen on Calling:
1.
Press
2.
Press
3.
Press
Save. To restore the previous setting without changing it, press
the first Options main screen is displayed.
OPTIONS and then press
Application Options.
Phone Screen on Calling. It will toggle between Yes and No.
Cancel. After saving or canceling,
6.8 Display Call Timers
This action controls whether the duration of the current call is displayed or not. If set to Yes, the duration of the current
call is displayed on the call appearance key. If set to No, the call duration will not be displayed.
To change the Display Call Timers status:
1.
Press
OPTIONS and then press
2.
Press
and then press
3.
Press
Application Options.
Display Call Timers?. It will toggle between Yes and No.
Save. To restore the previous setting without changing it, press
Cancel.
6.9 Message Display Rate
When the IP Office sends messages to your phone that are longer than the display area, the first part of the message is
presented for a specific time interval. The second part of the message is then displayed for a specific time interval. The
Message Display Rate can be either Fast (display interval is 2 seconds) or Slow - default (display interval is 3 seconds).
To change Message Display Rate:
1.
Press
OPTIONS and then press
2.
Press
and then press
3.
Press
Application Options.
Message Display Rate. It will toggle between Fast and Slow.
Save. To restore the previous setting without changing it, press
Cancel.
6.10 Visual Alerting
When this option is set to No (the default), ringing is the only notification of an incoming call. When set to Yes, your
phone rings and your voice message indicator light flashes to alert you to an incoming call.
To change Visual Alerting:
1.
Press
OPTIONS and then press
2.
Press
and then press
3.
Press
Application Options.
Visual Alerting? and toggle between Yes and No.
Save. To restore the previous setting without changing it, press
4610/5610 Phone
IP Office
Cancel.
Page 43
15-601124 Issue 05a (16 July 2009)
Chapter 7.
Function Keys
4610/5610 Phone
IP Office
Page 45
15-601124 Issue 05a (16 July 2009)
7. Function Keys
7.1 Overview of the Function Keys
Both the Function Keys and Soft Keys can be used to access a range of system features. The display adjacent to the key
shows the feature name.
Some of these features are default features supported by the phone (e.g. SpDial, Option and Log on the Soft Keys) and
are always available. Others are system features that can only be programmed by the system administrator for
Function Keys.
In addition, there are a number of System Features that you can always access yourself by the use of short codes.
Refer to System Features Introduction 52 for details of System Features that you can always access yourself by dialling
short codes, e.g. to listen to your voicemail messages, dial *17.
The main screen has 4 pages. This means that the 6
and
Function Keys on each page could be used for up to
24 features. However, it is strongly recommended that all three Call Appearance keys remain at their default
settings. Hence, there are 15 soft Function Keys that can be allocated to system features.
To move between pages, press
and
.
In the following example:
·
The first three keys have been set (default setting) as call appearance lines.
·
Key 4 has been set to access the Admin programmable functions.
·
indicates a call is currently parked in slot 1 by the user and
Key 5 has been set to monitor system park slot 1. The
when parked in a slot by other users, the label is underlined.
·
Key 6 has been set to the SAC (Send All Calls) function.
·
To display the other page of programmed functions set for this phone, press either
or
.
Programming your own functions:
If the phone has been setup with either or both the Admin and Admin1 features assigned to display keys, you can
select and program your own feature choices against other keys.
4610/5610 Phone
IP Office
Page 46
15-601124 Issue 05a (16 July 2009)
Function Keys: Overview of the Function Keys
7.2 Function Key Programming
If any one of the keys on the telephone is programmed with an Admin or Admin 1 feature key, it allows you to program
further features against other function keys. Both Admin and Admin1 are allocated to your function keys by your
system administrator and would appear on a menu screen that is similar to the following:
The two tables below list the user programmable features available from Admin and Admin1.
For full details of how each function works see Function Key Features.
Admin: The programmable functions available via an Admin key are:
Name
Acct
AD
Admin
AutCB
CFrwd
CPark
CPkUp
Dir
DPkUp
DROP
GrpPg
HdSet
HFAns
HGNS+
Park
Prog
RngOf
SAC
Spres
Timer
TmDay
4610/5610 Phone
IP Office
Description
Account Code Entry
Abbreviated Dial
Self-Administer
Automatic Callback
Call Forwarding All
Call Park
Call Pickup
Directory
Directed Call Pickup
DROP
Group Paging
HEADSET Toggle
Internal Auto-Answer
Set Hunt Group Night Service
Call Park to Other Extension
Abbreviate Dial Program
Ringer Off
Send All Calls
AD Suppress
Timer
Time of Day
Toggles
No
No
No
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Data
Optional
Yes
No
No
Optional
Optional
No
No
Yes
No
Yes
No
No
Yes
Yes
Yes
No
No
No
No
No
Page 47
15-601124 Issue 05a (16 July 2009)
In addition to the above, there is a key labeled Exlp? This key enables you to change the display from the shorthand
version displayed at default to a longhand version of your own. See Shorthand Programming Mode 49 and Longhand
Programming Mode 50 respectively.
Admin1: The programmable functions available via an Admin1 key.
Name
Park
<User>
<Group>
<Number>
Flash
4610/5610 Phone
IP Office
Description
Park
User
Group
Dial
Hook Flash
Toggles
No
No
No
No
No
Data
Yes
Yes
Yes
Yes
No
Page 48
15-601124 Issue 05a (16 July 2009)
Function Keys: Function Key Programming
7.3 Shorthand Programming Mode
1.
Press
Admin or
Admin 1. See Function Key Programming
2.
The Admin or Admin1 menu is displayed, similar to the following:
Admin Pages
47
.
With the exception of Expl?, the names shown are the features that you can assign to soft keys. When Admin has
been selected you can display the full name of the feature by pressing Expl?. See Longhand Programming Mode 50 .
Admin1 Page
3.
On the Admin pages, press
4.
When the function required is shown, press
5.
If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter the data using the
normal phone keypad.
6.
The upper part of the display reverts to showing the functions currently assigned to each
7.
To select the display key against which to program the new function, press
Caution
·
8.
9.
and
to move through the list of feature.
adjacent to its name.
and
and
.
.
Do not select the slot used for the Admin function. Replacing this function will lock the phone for further
programming until reset through the phone system.
If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
·
To end programming, press
PHONE/EXIT.
·
To continue programming other functions, press
Cont.
If the display slot already has a programmed function, the display shows FEATURE ON BUTTON. Press
until Repla, Keep and Delet are shown along the right-hand edge of the display.
·
To replace that existing function with the one just programmed, press Repla
PROGRAMMED! as above.
·
To keep the existing function and forget the function just programmed, press Keep
·
To delete the existing function and forget the function just programmed, press Delete
4610/5610 Phone
IP Office
or
. The display shows BUTTON
.
.
Page 49
15-601124 Issue 05a (16 July 2009)
7.4 Longhand Programming Mode
1.
Press
2.
To switch to longhand programming mode, press Expl?
3.
Press Next
4.
If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter the data using the
normal phone keypad.
5.
The upper part of the display reverts to showing the functions currently assigned to each
6.
To move between the pages of display keys, press
7.
To select the display key against which to program the new function, press
Caution
·
8.
9.
Admin or
Admin 1.
.
until the function required is shown, then press Selct
and
.
and
.
.
or
.
Do not select the slot used for the Admin function. Replacing this function will lock the phone for further
programming until reset through the phone system.
If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
·
To end programming, press
PHONE/EXIT.
·
To continue programming other functions, press
Cont
If the display slot already has a programmed function, the display shows FEATURE ON BUTTON. Press
until Repla, Keep and Delet are shown along the right-hand edge of the display.
·
To replace that existing function with the one just programmed, press Repla
displayed.
·
To keep the existing function and forget the function just programmed, press Keep
·
To delete the existing function and forget the function just programmed, press Delete
4610/5610 Phone
IP Office
or
. BUTTON PROGRAMMED! is
.
.
Page 50
15-601124 Issue 05a (16 July 2009)
Chapter 8.
System Features
4610/5610 Phone
IP Office
Page 51
15-601124 Issue 05a (16 July 2009)
8. System Features
8.1 Introduction
As well as your phones specific features, you can access a number of system features by dialling short codes.
These instructions are for the system's default configuration. They assume that you are using the default feature codes.
It also assumes that you have full access to all features and the public phone network.
8.2 Call Waiting
Call Waiting tells you if another call arrives while you are already making a call by providing a call waiting tone. If you
hear the call waiting tone, either end your current call or put the caller on hold. The waiting call should then ring.
To turn call waiting on, dial *15. To turn it off, dial *16.
Note
·
Call Waiting is only used for a single line phone with no call appearance buttons programmed.
8.3 Call Forwarding
·
Your calls can be forwarded to another extension or an external number when:
·
You are away from your desk (on no answer).
·
Your extension is busy (on all Call Appearance keys).
·
You are away from the office (e.g. when you are on holiday).
The following options are available for call forwarding:
·
To set the number to which your calls are forwarded, dial *07*201# (forwarding to 201 in this example).
·
To switch Forward Unconditional On (i.e. not Hunt Group), dial *01. The letter D is displayed. To switch it off, dial
*02.
·
To switch Forward On Busy On, dial *03. To switch it off, dial *04.
·
To switch Forward On No Answer On, dial *05. To switch it off, dial *06.
·
To switch Forward Hunt Group Calls On, dial *50. To switch it off, dial *51. This setting is for Forward Unconditional
only.
·
To Cancel All Forwarding, dial *00.
Note
·
Cancelling all forwarding will also cancel any Follow Me you have set.
4610/5610 Phone
IP Office
Page 52
15-601124 Issue 05a (16 July 2009)
System Features: Call Forwarding
8.4 Diverting Calls
You can divert your calls to another extension using Follow Me. Unlike Forward, Follow me can only be used to divert
calls to another internal extension on the same IP Office.
Note
·
If you do not answer calls at the temporary extension, they are forwarded to your own voicemail or call forwarding
number.
To use Follow-Me-Here from another extension:
In this case, N is your home extension
·
Dial *12*N# from the extension you are temporarily using.
·
Dial *13*N# to re-direct the calls back to your own extension, before you return to it.
To use Follow-Me-To from your home extension:
In this case, N is the extension to which you want your calls diverted.
·
Dial *14*N# from your own extension.
·
Dial *14*# to cancel either feature from your own extension.
Notes
·
If you use the option Cancel All Forwarding, your Follow Me will also be cancelled.
·
Follow Me does not apply to the following call types:
— Voicemail Callback
— Automatic Call Back
— HOLD or Park return.
8.5 Do Not Disturb
You may choose to receive no calls at all or only those from particular callers on your exceptions list:
·
To switch Do Not Disturb on/off (with or without exceptions), dial *08. An N is displayed. To switch it off, dial *09.
·
To add a number to the exception list, dial *10*N#.
·
To delete a number from the exception list, dial *11*N#.
Note
·
Your callers, other than your exceptions, either hear busy tone or are re-directed to your voicemail.
·
The only call that will ignore the Do Not Disturb rule will be one where you were the original caller, then performed
an unsupervised transfer to another extension. If that extension does not answer, the call will be re-directed to you
as the originator.
4610/5610 Phone
IP Office
Page 53
15-601124 Issue 05a (16 July 2009)
8.6 Parking Calls
You can park one or more calls; allowing you to make and receive other calls. You can also arrange for the parked call to
be retrieved by another extension.
The system only allows calls to be parked for a short while before reconnecting them to the user who parked the call; the
default setting is 5 minutes. Once the set time is reached, the parked call will ring back if your extension is idle.
Note
·
To park a call using the short codes, the call must first be put on Hold
19
.
To park a call to be picked up by any extension:
·
Dial *37*N# - Where N is the slot id you have assigned.
Inform your colleagues of the parked call and the slot id you have assigned.
To Un-park a call from another extension:
·
Dial *38*N# - Where N is the assigned slot id.
To Park a call to your local extension:
·
Dial *37*#
When you park a call to your local extension, it is automatically given a slot id number based on your extension
number followed by 0. If you park another call, it is given your extension number followed by 1 and so on up to 9.
For example: if your extension is 201, the first parked call will be given the slot id 2010.
To Un-park a call on your local extension:
·
Dial *38*# - If you have more than one call parked, the call parked first will be the first call to be unparked
Note
·
Feature keys can be setup to park and un-park calls. If required, contact your administrator.
8.7 Private Call
The Private Call feature is used to prevent any intrusions during the call. Private call can be activated either before or
during a call and will set the phone status to 'cannot be intruded' until you switch the Private Call feature off.
If you place a call to an extension with Private Call on, you will hear the Number Unobtainable tone.
Note
·
Private call is not a default feature. If you require this option, contact your administrator.
8.8 Ring Back
If your system administrator has allocated you the Ring Back When Free feature you can:
RBak to set a callback on that extension.
1.
When you call an extension that does not answer or is busy, press
2.
When the extension you called becomes free, your phone will ring (a burst of three rings). Lift the handset and the
extension is called automatically.
3.
Lift the handset and the extension is called automatically.
4610/5610 Phone
IP Office
Page 54
15-601124 Issue 05a (16 July 2009)
System Features: Ring Back
8.9 Voicemail
You can enable voicemail to allow callers to leave messages when you are out of the office, away from your desk or
engaged on another phone call. Voicemail messages can be retrieved internally or externally via any phone. Your
voicemail may be set up to deliver your messages by calling you whenever you hang up: this feature is known as
Voicemail Ringback.
Note
·
Not all systems support voicemail or have voicemail installed.
The following options are available for voicemail:
·
To switch voicemail on, dial *18. To switch it off, dial *19.
·
To retrieve your voicemail, dial *17.
·
To turn Voicemail Ringback on, dial *48. To turn it off, dial *49.
Additionally,
·
To fast forward a message, dial #.
·
To rewind a message, dial *.
·
To place a call to the sender of the message, dial ** .
To forward your voicemails dial 6. You will here the following options:
·
"Press 2 to forward message to other extensions."
·
"Press 3 to pre-pend a header message."
·
"Press 4 to send message into your saved messages list."
·
"Press # to skip this forwarding."
For option 2 or 3, following the instructions and, when completed, the messages is forwarded.
Dialling a number while listening to your messages invokes further facilities:
·
Once messages have been delivered, they are held on the system for 24 hours (this is fixed for Voicemail Lite, but
can be varied by your system administrator if your IP Office is equipped with VoicemailPro).
·
You can collect your voicemail from another extension by using the PIN your system administrator has set up for
you. You can collect your messages if you are out of the office, by either dialling from a number that has been
registered for the purpose or by dialling your extension number and PIN when prompted. If validation is successful,
then dial 2 to retrieve your mail.
·
The system administrator also specifies the reception number, to which the call is diverted if the caller dials 0, and
your email address if your voicemail and email are integrated.
4610/5610 Phone
IP Office
Page 55
15-601124 Issue 05a (16 July 2009)
8.10 Default Feature Codes
The following are the normal default short codes available to all users. Your system administrator may add additional
codes for other features and for speed dials.
The N (where shown), should be replaced by the appropriate number. For example, with *07*N#, replace N with the
extension to which you want your calls forwarded when you have forwarding switched on.
*00
Cancel All Forwarding
*32*N#
Call Pick Up Extension
*01
Forward Unconditional On
*33*N#
Call Queue
*02
Forward Unconditional Off
*34
HOLD Music
*03
Forward On Busy On
*35*N#
Extn Login
*04
Forward On Busy Off
*36
Extn Logout
*05
Forward On No Answer On
*37*N#
Park Call
*06
Forward On No Answer Off
*38*N#
Ride Call
*07*N#
Forward to Number
*39
Relay On
*08
Do Not Disturb On
*40
Relay Off
*09
Do Not Disturb Off
*41
Relay Pulse
*10*N#
Do Not Disturb Exception Add
*42
Relay On
*11*N#
Do Not Disturb Exception Delete
*43
Relay Off
*12*N#
Follow Me Here
*44
Relay Pulse
*13*N#
Follow Me Here Cancel
*45*N#
Call Steal
*14*N#
Follow Me To
*46
Call Steal
*15
Call Waiting On
*47
CONFERENCE Add
*16
Call Waiting Off
*48
Voicemail Ringback On
*17
Voicemail Collect
*49
Voicemail Ringback Off
*18
Voicemail On
*50
Forward Hunt Group Calls On
*19
Voicemail Off
*51
Forward Hunt Group Calls Off
*20*N#
Set Hunt Group Night Service
*52
Clear Call
*21*N#
Clear Hunt Group Night Service
*53*N#
Call Pickup Members
*29
Toggle Calls
*57*N#
Forward On Busy Number
*30
Call Pick Up Any
*70*N#
Dial Physical Extn by Number
*31
Call Pick Up Group
*71*N#
Dial Physical Extn by ID
4610/5610 Phone
IP Office
Page 56
15-601124 Issue 05a (16 July 2009)
Chapter 9.
Management and
Troubleshooting
4610/5610 Phone
IP Office
Page 57
15-601124 Issue 05a (16 July 2009)
9. Management and Troubleshooting
9.1 Overview
This section provides helpful information for:
·
Testing your phone to be sure it is operating correctly.
·
Basic Troubleshooting; this chart provides the most common problems an end user might encounter and suggested
resolutions.
·
Application-specific troubleshooting; this chart describes problems and solutions specific to phone application (Speed
Dial, Call Log, or Web Access).
·
Resetting or power-cycling your phone, when Basic Troubleshooting does not resolve a problem.
9.2 Testing Your Phone
The test function enables you to verify that your phone’s lights and display are operating properly.
To test the phone's lights and display:
1.
With the phone idle (on-hook), press and release
8 # (which stands for TEST).
MUTE, then press the following numbers on the dial pad: 8 3 7
The display should indicate the self-test has started. If the test is successful, the message “Self test Passed #=end”
displays; if the test is not successful, the message “Self test Failed #=end” displays instead.
2.
To return to the phone screen, press #.
If nothing appears on the display and the phone is receiving power, your phone may need to be replaced. Contact
your system administrator for assistance or additional troubleshooting information.
4610/5610 Phone
IP Office
Page 58
15-601124 Issue 05a (16 July 2009)
Management and Troubleshooting: Testing Your Phone
9.3 Troubleshooting Chart
·
Phone does not activate when connected for the first time:
Unless your system administrator has already initialized your phone, you may experience a delay of several minutes
before it becomes operational. Upon plug-in, your phone immediately begins downloading its operational software, IP
address, and any special features programmed by your system administrator from the server to which it is
connected. Report any delay of more than 10 minutes to your system administrator.
·
Phone does not activate after a power interruption:
Allow a few minutes for re-initialization after unplugging, powering down the phone, server problems, or other power
interruption causes.
·
Display shows an error/informational message:
·
Most messages involve server/phone interaction. If you cannot resolve the problem based on the message received,
contact your system administrator for resolution.
·
Speakerphone does not operate:
Ask your system administrator if your Speakerphone has been disabled.
·
Characters do not appear on the display screen:
See " Phone does not activate when connected for the first time" above. Check all lines into the phone to be sure it is
properly connected. Check the power source to be sure your telephone is receiving power. Perform the following Test
procedure: with the telephone idle (on-hook), press and release
MUTE, then press the following numbers on the
dial pad: 8 3 7 8 # (which stands for TEST). The display should indicate the self-test has started, then report if the
test was successful or failed. If nothing appears on the display, and the phone is receiving power, your phone may
need to be replaced. If the above suggested solutions do not resolve the problem, reset or power cycle the phone
with your system administrator’s assistance.
·
No dial tone:
Make sure both the handset and line cords into the phone are securely connected. Note that there may be a slight
operational delay if you unplug and reconnect the phone. Contact your system administrator if the problem persists.
·
Phone does not ring:
Set your ringer volume to a higher level using
the above suggested solution.
·
and
. From another phone, place a call to your extension to test
All other IP problems:
Contact your system administrator.
SPEED DIAL APPLICATION:
·
You cannot dial out using any Speed Dial entries:
Dial button. Check that all call appearances (incoming/outgoing lines) are not already in use. If all lines are in use,
wait until a line is available to make your call.
·
You cannot add an entry to the Speed Dial list:
You have 100 Speed Dial entries, the maximum allowed. You must delete at least one entry before adding a new
entry.
CALL LOG APPLICATION:
·
You cannot dial out after selecting a call log entry:
Check that all call appearances incoming/outgoing lines are not already in use. If all lines are in use, wait until a line
is available to make your call.
·
You cannot add an entry to the Speed Dial list:
You have 100 Speed Dial entries, the maximum allowed. You must delete at least one entry before adding a new
entry.
·
Dialling from this application does not go through:
Your administrator must administer settings for the Enhanced dialling feature beyond the defaults.
4610/5610 Phone
IP Office
Page 59
15-601124 Issue 05a (16 July 2009)
Index
Index
A
answering calls 14
B
bridged appearance 9
C
call appearance keys 9, 10
call coverage appearance 9
call log
accessing 31
deleting 32
displaying 31
overview 30
speed dial 25
troubleshooting 59
calls
answering 14
clearing 15
conference 20, 21, 56
diverting 53
forwarding 52, 56
hold 19
making 16, 31, 54
mute 19
parking calls 54
private call 54
redial 18
transfer 20
voicemail 55, 56
waiting 52, 56
changing feature key labels 41
conference 20, 21
D
default feature codes 56
display 12
display call timers 43
display contrast 41
diverting calls 53
do not disturb 53, 56
E
M
making calls 15, 16
management 58
message display rate 43
mute 19
N
no user 12
P
park call 56
personal ringing 40
phone screen on answer 42
phone screen on calling 43
pick up 56
private call 54
programming
function key 47
longhand 50
shorthand 49
R
redial 18
relay 56
ring back 54
S
shorthand programming 49
speakerphone 17, 59
speed dial
adding 25, 26
deleting 25
dialing 25
editing 25
log entry 32
overview 24
troubleshooting 59
using 18
system features 10, 52
T
testing 58
toggle 56
transfer 20
troubleshooting 59
external calls 54
V
F
visual alerting 43
visual voice
changing your greeting 37
changing your password 37
email alerts 38
listen 35
overview 34
send 36
transfer 36
voicemail 55, 56
feature key labels 41
follow me 56
forwarding calls 52, 56
function keys 46, 47
H
headset 16
hold 19
hunt group 56
I
incoming calls 10, 14, 16
internal calls 54
IP settings 40
L
language 42
lights/display 58
line appearance 9
logging off 11
loging on 11
longhand programming 50
4610/5610 Phone
IP Office
Page 61
15-601124 Issue 05a (16 July 2009)
4610/5610 Phone
IP Office
Page 63
15-601124 Issue 05a (16 July 2009)
Performance figures and data quoted in this document are typical, and must be
specifically confirmed in writing by Avaya before they become applicable to any
particular order or contract. The company reserves the right to make alterations
or amendments to the detailed specifications at its discretion. The publication of
information in this document does not imply freedom from patent or other
protective rights of Avaya or others.
Intellectual property related to this product (including trademarks) and registered
to Lucent Technologies have been transferred or licensed to Avaya.
All trademarks identified by the ® or ™ are registered trademarks or trademarks,
respectively, of Avaya Inc. All other trademarks are the property of their
respective owners.
This document contains proprietary information of Avaya and is not to be
disclosed or used except in accordance with applicable agreements.
Any comments or suggestions regarding this document should be sent to
"wgctechpubs@avaya.com".
© 2009 Avaya Inc. All rights reserved.
Avaya
Unit 1, Sterling Court
15 - 21 Mundells
Welwyn Garden City
Hertfordshire
AL7 1LZ
England.
Tel: +44 (0) 1707 392200
Fax: +44 (0) 1707 376933
Web: http://marketingtools.avaya.com/knowledgebase
4610/5610 Phone
IP Office
Page 64
15-601124 Issue 05a (16 July 2009)
Download PDF

advertising