Avanti WD30EC Water Dispenser User Manual

INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MODEL NUMBER / NUMERO DE MODELO:
WD30EC
THERMOELECTRIC WATER DISPENSER
ENFRIADOR DE AGUA TERMOELECTRICO
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
La sección en español empieza en la página 12.
Avanti Products, A Division of the Mackle Co., Ltd.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
REGISTRATION INFORMATION
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days
of purchase and receive these important benefits to the following address:
Avanti Products, A Division of the Mackle Co., Ltd.
P.O. Box 520604 - Miami, Florida 33152 USA
? Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help
you refer to this information in the event of an insurance claim such as fire or theft.
? Promote better products:
We value your input. Your responses will help us develop products designed to best meet your
future needs.
----------------------------------------------------------(detach here)---------------------------------------------------------Avanti Registration Card
__________________________________ ______________________________________
Name
Model #
Serial #
__________________________________ ______________________________________
Address
Date Purchased
Store/Dealer Name
__________________________________ ______________________________________
City
State
Zip
Occupation
__________________________________ As Your Primary Residence, Do You:
Area Code
Phone Number
?Own
?Rent
Did You Purchase An Additional Warranty:
?Extended
?None
Reason For Choosing This Avanti Product:
Please indicate the most important factors
that influenced your decision to purchase
this product.
?Price
?Product Features
?Avanti Reputation
?Product Quality
?Salesperson Recommendation
?Other
?Friend/Relative Recommendation
?Warranty
?Other_______________________
Your Age:
?under 18 ?18-25 ?26-30
?31-35
?36-50 ?over 50
Marital Status:
?Married
?Single
Is This Product Used In The:
?Home
?Business
How Did You Learn About This Product:
?Advertising
?In Store Demo
?Personal Demo
______________________________
Comments____________________________
_____________________________________
_____________________________________
2
3
HELP US HELP YOU …
Read this guide carefully.
Write down the model and serial numbers.
It is intended to help you operate and maintain
your new water dispenser properly.
You'll find them on a label located on the back
side of the unit.
Keep it handy to answer your questions.
If you don't understand something or you need
more assistance, please call:
Please write these numbers here:
____________________________________
Date of Purchase
Avanti Customer Service
800-220-5570
____________________________________
Model Number
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your water dispenser.
If you received a damaged water dispenser,
immediately contact the dealer (or builder) that
sold you the water dispenser.
Save time and money. Before you call for
service, check the Problem Solver Guide. It lists
causes of minor operating problems that you
can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
4
PARTS AND FEATURES
1
9
2
10
11
3
4
5
6
12
7
13
8
14
15
1. Water Intake
2. Hot Indicator Light (RED)
3. Cold Indicator Light (GREEN)
4. Cold Water Faucet (BLUE)
5. Hot Water Faucet/Child Guard (RED)
6. Built-in Cup Dispenser
7. Removable Drip Tray
8. Fixed Feet
5
9. Air inlet
10. Cooling Switch
11. Heating Switch
12. Cooling Fan Vent
13. Power Supply Cord with Plug
14. Hot Water Drain
15. Cold Water Drain
TABLE OF CONTENTS
Registration Information ______________________________________________________________2
Help Us Help You … __________________________________________________________________4
Parts And Features ___________________________________________________________________5
Important Safety Instructions __________________________________________________________7
Installation Guidelines ________________________________________________________________7
Operation Instructions ________________________________________________________________7
Before Using Your Water Dispenser_____________________________________________________7
Operating Your Water Dispenser _______________________________________________________8
Electrical Connection _________________________________________________________________8
Steps To Replace Water Bottle_________________________________________________________8
Cold Water Control ___________________________________________________________________8
Hot Water Control ____________________________________________________________________8
Care And Maintenance ________________________________________________________________9
Taking Dispenser Out Of Service _______________________________________________________9
Troubleshooting Guide _______________________________________________________________ 10
Service For Your Water Dispenser_____________________________________________________ 10
Your Avanti Products Warranty________________________________________________________ 11
Wiring Diagram _____________________________________________________________________ 12
INSTRUCCIONES EN ESPAÑOL____________________________________________________ 12 - 14
6
IMPORTANT SAFETY INSTRUCTIONS
?
?
?
?
?
WARNING?
To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
Read all instructions before using the water dispenser.
Never clean parts with flammable fluids. The fumes can create a fire hazard or
explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other water dispenser. The fumes can create a fire hazard or explosion
Do not plug unit into receptacle until you ensure the water tank switches are off.
-Save these instructions-
INSTALLATION GUIDELINES
?
?
?
?
?
?
?
Remove the exterior and interior packing.
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the appliance not to perform
properly.
Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an authorized
Avanti Products service center.
This water dispenser is not recommended for outdoor use.
Do not locate the dispenser in area where the temperature may fall below freezing (32º F).
Keep area around dispenser free of dust and dirt.
Keep the reserve supply of water bottles away from excessive heat and light.
OPERATION INSTRUCTIONS
Before Using Your Water Dispenser
? Check to be sure the following parts are included:
? 1 Instruction Manual
? 1 Cup Dispenser Bracket
? 1 Removable Drip Tray
? The water cooler is pre-cleaned at the factory but the reservoir and water lines must be flushed with
fresh water before use as follows:
o Keep the unit unplugged.
o Fill water tank with tap water full to capacity (about 20 ounces). Wait for 5 minutes until
water settles.
o Proceed to drain the water from both faucets until no more water remains.
o Then, drain any water left in the tanks by opening the water drain caps located on the
bottom, until it drains completely.
o Proceed to close the drain caps. Also make sure both faucets are closed.
o Place the water bottle on the water intake, allow water to stand for approximately one
minute.
o Open water faucets to insure water flows from both faucets.
o Plug dispenser into the electrical outlet.
7
o
o
Turn the cold and hot water switches ON (at the rear).
Now you are ready to use your water dispenser.
I T WILL TAKE APPROXIMATELY 1 HOUR TO REACH OPTIMUM TEMPERATURE. I F YOU CONSUME ONE 8 OZ .
CUP THE RECOVERY TIME IS APPROXIMATELY 25 MINUTES OR LESS. I F YOU CONSUME 2 OR MORE 8 OZ .
CUPS RECOVERY TIME CAN TAKE UP TO 1 HOUR.
NOTE:
Your water dispenser has been cleaned and sanitized before leaving the factory, but in case a
taste problem develops, place one tablespoon of baking soda and add tap water. Fill water tank again
and repeat basic operations previously outlined.
OPERATING YOUR WATER DISPENSER
Electrical Connection
? WARNING?
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF
THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS
SERVICE CENTER.
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped
with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of
electrical shock.
Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning
power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products
service center.
This appliance requires a standard 115/120 Volts A.C. ~/ 60Hz electrical outlet with three-prong ground.
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental
injury.
Do not use an adapter plug with this appliance.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance.
Steps To Replace Water Bottle
? Use a clean cloth to wipe off neck of bottle.
? Remove cap, if there is one on.
? Insert the water bottle on the water intake over reservoir opening so it settles properly on it.
? Wipe off any water, which may have splashed on dispenser top.
Cold Water Control
Turn the switch marked “COLD” ON. The green (COLD) indicator will be lit and the process begins.
When the water reaches the right temperature the green (COLD) indicator goes off automatically.
Hot Water Control
Turn the switch marked “HOT” ON. The red (HOT) indicator will be lit on and the unit will begin to heat
the water. When the water reaches the right temperature the red (HOT) light goes off automatically.
When the temperature goes down to approx. 86º C (187º F), the red indicator will glow again and another
8
heating process starts.
NOTE:
THE HOT WATER FAUCET HAS A CHILD-SAFETY GUARD ATTACHMENT.
To get hot water:
? Press the safety button on the faucet and then push the faucet handle
down.
? Continue holding safety valve while pushing down faucet handle as
long as water is being dispensed.
? When faucet handle is released, make sure to return it to the original
position.
CARE AND MAINTENANCE
?
?
Wash the inside of the reservoir with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
The drip tray and water faucets should be cleaned with mild detergent and warm water.
TAKING DISPENSER OUT OF SERVICE
?
?
?
If the water dispenser will not be used for a long period of time, turn both switches OFF (at the rear)
and unplug the power cord from the wall outlet.
Drain the water through the faucets.
Drain the water from the tanks by removing the caps from the bottom of the dispenser.
WARNING—THE WATER COMING OUT OF THE BOTTOM MARKED “HOT WATER DRAIN” MAY BE
SCOLDING.
9
PROBLEMS WITH YOUR WATER DISPENSER?
You can solve many common water dispenser problems easily, saving you the cost of a possible service
call. Try the suggestions outlined below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEMS
Water dispenser does not operate.
Water is not cold enough.
Water is not hot enough.
Vibrations.
POSSIBLE CAUSES
Not plugged in.
The circuit breaker tripped or a blown fuse.
Check to be sure the COLD switch on the back is
ON.
Too much water has been drawn within a short
period of time. If more than two 8 oz. Cups have
been drawn within a 25 minute span, you will need
to wait up to one hour to reach optimal
temperature.
Check to be sure the HOT switch on the back is
ON.
Too much water has been drawn within a short
period of time. If more than two 8 oz. Cups have
been drawn within a 25 minute span, you will need
to wait up to one hour to reach optimal
temperature.
Check to assure that the water dispenser is level.
SERVICE FOR YOUR WATER DISPENSER
We are proud of our customer service organization and the network of professional service technicians
that provide service on your Avanti appliances. With the purchase of your Avanti appliance, you can be
confident that if you ever need additional information or assistance, the Avanti Products Customer
Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Whatever your questions are about our products,
help is available.
Part Orders
800-220-5570
You may order parts and accessories that will be
delivered directly to your home by personal check,
money order, Master Card, or Visa.
In-Home Repair Service
800-220-5570
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.
10
YOUR Avanti Products WARRANTY
Staple your sales receipt here. Proof of
original purchase date is needed to obtain
service under warranty.
WHAT IS COVERED
LIMITED ONE-YEAR
WARRANTY
For one year from the date of purchase
by the original owner, Avanti Products
will, at its option, repair or replace any
part of the appliance which proves to be
defective in material or workmanship
under normal use. During this period
Avanti Products will provide all parts
and labor necessary to correct such
defects free of charge, so long as the
appliance has been installed and
operated in accordance with the written
instructions in this manual. In rental or
commercial use, the warranty period is
90 days.
WHAT IS NOT COVERED
?
?
?
?
?
?
Incidental or consequential damages.
Parts and labor costs for the following will
not be considered as warranty:
Light bulbs and/or plastic housing.
Replacement of house fuses or resetting
circuit breakers.
Repairs performed by unauthorized
servicers.
Transportation of this product to and from
the designated service facility is the
responsibility of the consumer.
?
?
?
?
11
Service calls that do not involve defects in
material or workmanship such as customer
education or improper installation.
Service calls that are related to external
problems, such as abuse, misuse,
inadequate electrical power, accidents, fire,
floods, or acts of God.
Failure of the product if it is used for other
than its intended purpose.
This warranty does not apply outside the
continental U.S.A.
WIRING DIAGRAM
1. 10A FUSE
7. THERMOSTAT
2. HEATING SWITCH
8. HEATING INDICATOR (RED)
3. COOLING SWITCH
9. COOLING INDICATOR (GREEN)
4. TRANSFROMER
10. CONTROL PCB
5. PROTECTOR
11. THERMOELCTRIC REFRIGERATION
6. HEATER
INSTRUCCIONES EN ESPAÑOL
AVISO:
ESTE GRIFO DE AGUA CALIENTE TIENE UN ADAPTADOR DE SEGURIDAD PARA NIÑOS.
PARA OBTENER AGUA CALIENTE:
? APRIETE EL BOTON DE SEGURIDAD HACIA ABAJO.
? MANTENGA AGAURDO ESE BOTON ROJO MIENTRAS QUE NUEVA EL GRIFO Y ESTE
DISPENSANDO AGUA.
? CUANDO SUELTE EL BOTON DE SEGURIDAD, ASEGURESE DE RETORNARLO TODO A LA
POSICION ORIGINAL.
12
INSTRUCCIONES EN ESPAÑOL
DIRECCIONES BASICAS DE OPERACION:
?
COLOQUE EL ENFRIADOR EN UN AREA BIEN VENTILADA.
?
ESCOJA UN LUGAR CON PISO NIVELADO.
?
NO COLOQUE EL ENFRIADOR DONDE LA TEMPERATURA AMBIENTAL PUEDA BAJAR DE
32°F (0°C).
OPERACION INICIAL
? REMUEVA EL BOTELLON DE AGUA.
? AUNQUE EL ENFRIADOR SALE LIMPIO DE LA FABRICA, DEBE LIMPIAR Y ESTERILIZAR LOS
CONDUCTOS DEL TANQUE Y LAS LLAVES DE ACUERDO A LOS SIGUIENTES PASOS:
?
LLENE EL TANQUE DE AGUA (HASTA EL TOPE) CON AGUA DE LA PILA.
?
DEJE NIVELAR EL AGUA POR 5 MINUTOS.
?
ABRA LAS LLAVES HASTA QUE SALGA TODA EL AGUA. CIERRELAS.
?
ENTONCES, VACIE EL TANQUE COMPLETAMENTE ABRIENDO LAS TAPAS DE DRENAJE
SITUADA ABAJO DEL GABINETE. CIERRELAS.
?
COLOQUE DE NUEVO EL BOTTELLON LLENO DE 3 LITROS. DEJE QUE EL AGUA SE NIVELE
POR UN MINUTO.
?
ABRA LAS LLAVES PARA ASEGURARSE QUE EL AGUA SALE UNIFORMEMENTE.
CIERRELAS INMEDIATEMENTE.
?
CONECTE EL ELECTRODOMESTICO A LA PARED.
?
AHORA SU ENFRIADOR ESTA LISTO PARA USAR.
?
PARA OBTENER AGUA FRIA, MUEVA EL INTERRUPTOR MARCADO “COLD” SITUADO EN LA
PARTE TRASERA A LA POSICION “ON”. LA LUZ VERDE SE ENCENDERA. CUANDO EL AGUA
ALCANCE LA TEMPERATURA CORRECTA, SE APAGARA.
?
PARA OBTENER AGUA CALIENTE, MUEVA EL INTERRUPTOR MARCADO “HOT” SITUADO EN
LA PARTE TRASERA A LA POSICION “ON”. LA LUZ ROJA SE ENCENDERA. CUANDO EL
AGUA ALCANCE LA TEMPERATURA CORRECTA, SE APAGARA.
CONTROLES DE OPERACION
PARA ALCANZAR LA TEMPERATURA OPTIMA SE NECESITA APROXIMADAMENTE UNA HORA.
PARA REPONER UN VASO DE AGUA DE 8 oz., SE NECESITAN APROXIMADAMENTE 25 MINUTOS
O MENOS. PARA REPONER 2 (DOS) O MAS VASOS DE 8 oz. ESPERE APROXIMADAMENTE UNA
HORA.
NOTA: SU ENFRIADOR FUE LIMPIADO Y ESTIRILIZADO ANTES DE SALIR DE LA FABRICA. EN
CASO QUE SIENTA ALGUN SABOR EN EL AGUA, ECHE UNA CUCHARADA DE BICARBONATO DE
SODA Y AÑADA AGUA DE LA PILA. LLENE EL TANQUE Y REPITA LA OPERACION INICIAL.
ADVERTENCIA
EL USO INCORRECTO DEL CABLE A TIERRA PUEDE OCASIONAR UN CHOQUE ELECTRICO. SI
EL CORDON ESTA DAÑADO, REEMPLACELO EN UN CENTRO DE SERVICIOS AUTORIZADO POR
AVANTI PRODUCTS.
MANTENIMIENTO
?
?
?
?
?
?
ANTES DE EFECTUAR LA LIMPIEZA, DESENCHUFE EL ENFRIADOR.
PARA LIMPIAR LAS PARTES DE PLASTICO SE REQUIERE JABON LIQUIDO Y AGUA TIBIA. NO
USE LIMPIADORES ABRASIVOS EN LA SUPERFICIE SUPERIOR NI EN LA BANDEJA DE
ESCURRIMIENTO.
SI NO VA A USAR EL ENFRIADOR POR UN TIEMPO PROLONGADO
DESENCHUFE LA UNIDAD.
QUITE EL BOTELLON DE AGUA.
COLOQUE LOS INTERRUPTORES (10) Y (11) (EN LA PARTE TRASERA) EN LA POSICION
“OFF”. (APAGADO)
DRENE EL AGUA ABRIENDO LAS LLAVES.
13
?
DRENE LA APERTURA EN EL FONDO QUITANDO LOS TAPONES (8) Y (9).
CENTRO DE SERVICIOS
LA MAYORIA DE LOS PROBLEMAS SE RESUELVEN CON UNA SIMPLE LLAMADA
TELEFONICA A NUESTRO NUMERO SIN CARGO.
1-800-220-5570
ANTES DE DEVOLVER EL PRODUCTO O PARA OBTENER LA DIRECCION Y NUMERO DE
TELEFONO DEL CENTRO DE SERVICIO MAS CERCANO LLAME AL SIGUIENTE NUMERO.
1-800-220-5570
GUIA PARA RESOLVER PROBLEMAS
POSIBLES PROBLEMAS
CAUSA
DERRAME DE AGUA POR FUERA DEL
ENFRIADOR.
EL AGUA NO ESTA SUFICIENTEMENTE FRIA.
EL AGUA NO ESTA SUFICIENTEMENTE
CALIENTE.
EL ENFRIADOR NO ENFRIA O CALIENTA EL
AGUA.
VIBRACIONES
LA BOTELLA ESTA PERFORADA –
REEMPLACELA.
VERIFIQUE QUE EL INTERRUPTOR (COLD).
ESTE EN POSICION “ON”.
NO DIO SUFICIENTE TIEMPO PARA QUE
ENFRIE EL AGUA. PARA REPONER DOS O
MAS VASOS DE 8 oz. SE NECESITA
APROXIMADAMENTE UNA HORA.
VERIFIQUE QUE EL INTERRUPTOR (HOT)
ESTE EN POSICION “ON”.
NO DIO SUFICIENTE TIEMPO PARA QUE
ENFRIE EL AGUA. PARA REPONER DOS O
MAS VASOS DE 8 oz. SE NECESITA
APROXIMADAMENTE UNA HORA.
VERIFIQUE LOS CIRCUITOS, FUSIBLES O
DISYUNTORES.
VERIFIQUE QUE EL ENFRIADOR ESTE EN
UN PISO FIRME Y NIVELADO.
PRINTED IN CHINA
14