User guide | Avaya 1400 Series Telephone User Manual

Avaya 1400 Series Digital Deskphone User
Guide for Avaya Aura™ Communication
Manager
16-603151
Issue 2
September 2010
© 2010 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts have been made to ensure that the
information in this document is complete and accurate at the time of
printing, Avaya assumes no liability for any errors. Avaya reserves the
right to make changes and corrections to the information in this
document without the obligation to notify any person or organization of
such changes.
Full legal page information
For full support, please see the complete document, Avaya Support
Notices for Hardware Documentation, document number 03–600759.
To locate this document on our Web site, simply go to http://
www.avaya.com/support and search for the document number in the
search box.
Note
Using a cell, mobile, or GSM phone, or a two-way radio in close
proximity to an Avaya IP telephone might cause interference.
During a power surge, EFT or ESD, calls may be dropped. After a
power surge, EFT or ESD, it is normal for the phone to restart.
Documentation disclaimer
Avaya shall not be responsible for any modifications, additions, or
deletions to the original published version of this documentation unless
such modifications, additions, or deletions were performed by Avaya.
End User agree to indemnify and hold harmless Avaya, Avaya's agents,
servants and employees against all claims, lawsuits, demands and
judgments arising out of, or in connection with, subsequent
modifications, additions or deletions to this documentation, to the
extent made by End User.
Link disclaimer
Avaya is not responsible for the contents or reliability of any linked Web
sites referenced within this site or documentation(s) provided by Avaya.
Avaya is not responsible for the accuracy of any information, statement
or content provided on these sites and does not necessarily endorse
the products, services, or information described or offered within them.
Avaya does not guarantee that these links will work all the time and has
no control over the availability of the linked pages.
Warranty
Avaya provides a limited warranty on this product. Refer to your sales
agreement to establish the terms of the limited warranty. In addition,
Avaya’s standard warranty language, as well as information regarding
support for this product, while under warranty, is available to Avaya
customers and other parties through the Avaya Support Web site:
http://www.avaya.com/support. Please note that if you acquired the
product from an authorized Avaya reseller outside of the United States
and Canada, the warranty is provided to you by said Avaya reseller and
not by Avaya.
Licenses
THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA
WEBSITE, HTTP://SUPPORT.AVAYA.COM/LICENSEINFO/ ARE
APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR
INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC.,
ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA RESELLER
(AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH
AVAYA OR AN AUTHORIZED AVAYA RESELLER. UNLESS
OTHERWISE AGREED TO BY AVAYA IN WRITING, AVAYA DOES
NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED
FROM ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR AN
AVAYA AUTHORIZED RESELLER, AND AVAYA RESERVES THE
RIGHT TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE
ELSE USING OR SELLING THE SOFTWARE WITHOUT A LICENSE.
2
Avaya 1400 Series Digital Deskphone User Guide
BY INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR
AUTHORIZING OTHERS TO DO SO, YOU, ON BEHALF OF
YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING,
DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER
REFERRED TO INTERCHANGEABLY AS “YOU” AND “END USER”),
AGREE TO THESE TERMS AND CONDITIONS AND CREATE A
BINDING CONTRACT BETWEEN YOU AND AVAYA INC. OR THE
APPLICABLE AVAYA AFFILIATE (“AVAYA”).
Avaya grants End User a license within the scope of the license types
described below. The applicable number of licenses and units of
capacity for which the license is granted will be one (1), unless a
different number of licenses or units of capacity is specified in the
Documentation or other materials available to End User. “Designated
Processor” means a single stand-alone computing device. “Server”
means a Designated Processor that hosts a software application to be
accessed by multiple users. “Software” means the computer programs
in object code, originally licensed by Avaya and ultimately utilized by
End User, whether as stand-alone products or pre-installed on
Hardware. “Hardware” means the standard hardware originally sold by
Avaya and ultimately utilized by End User.
License types
Designated System(s) License (DS). End User may install and use
each copy of the Software on only one Designated Processor, unless
a different number of Designated Processors is indicated in the
Documentation or other materials available to End User. Avaya may
require the Designated Processor(s) to be identified by type, serial
number, feature key, location or other specific designation, or to be
provided by End User to Avaya through electronic means established
by Avaya specifically for this purpose.
Shrinkwrap License (SR). With respect to Software that contains
elements provided by third party suppliers, End User may install and
use the Software in accordance with the terms and conditions of the
applicable license agreements, such as “shrinkwrap” or “clickwrap”
license accompanying or applicable to the Software (“Shrinkwrap
License”). The text of the Shrinkwrap License will be available from
Avaya upon End User’s request (see “Third-party Components” for
more information).
Copyright
Except where expressly stated otherwise, no use should be made of
materials on this site, the Documentation(s) and Product(s) provided
by Avaya. All content on this site, the documentation(s) and the
product(s) provided by Avaya including the selection, arrangement and
design of the content is owned either by Avaya or its licensors and is
protected by copyright and other intellectual property laws including the
sui generis rights relating to the protection of databases. You may not
modify, copy, reproduce, republish, upload, post, transmit or distribute
in any way any content, in whole or in part, including any code and
software. Unauthorized reproduction, transmission, dissemination,
storage, and or use without the express written consent of Avaya can
be a criminal, as well as a civil, offense under the applicable law.
Third-party components
Certain software programs or portions thereof included in the Product
may contain software distributed under third party agreements (“Third
Party Components”), which may contain terms that expand or limit
rights to use certain portions of the Product (“Third Party Terms”).
Information regarding distributed Linux OS source code (for those
Products that have distributed the Linux OS source code), and
identifying the copyright holders of the Third Party Components and the
Third Party Terms that apply to them is available on the Avaya Support
Web site: http://www.avaya.com/support/Copyright/.
Preventing toll fraud
“Toll fraud” is the unauthorized use of your telecommunications system
by an unauthorized party (for example, a person who is not a corporate
employee, agent, subcontractor, or is not working on your company's
behalf). Be aware that there can be a risk of toll fraud associated with
September 2010
your system and that, if toll fraud occurs, it can result in substantial
additional charges for your telecommunications services.
Avaya fraud intervention
If you suspect that you are being victimized by toll fraud and you need
technical assistance or support, call Technical Service Center Toll
Fraud Intervention Hotline at +1-800-643-2353 for the United States
and Canada. For additional support telephone numbers, see the Avaya
Support Web site: http://www.avaya.com/support/. Suspected security
vulnerabilities with Avaya products should be reported to Avaya by
sending mail to: securityalerts@avaya.com.
Trademarks
All other trademarks are the property of their respective owners.
Downloading documents
For the most current versions of documentation, see the Avaya Support
Web site: http://www.avaya.com/support
Contact Avaya Support
Avaya provides a telephone number for you to use to report problems
or to ask questions about your product. The support telephone number
is 1-800-242-2121 in the United States. For additional support
telephone numbers, see the Avaya Web site: http://www.avaya.com/
support
Avaya 1400 Series Digital Deskphone User Guide
September 2010
3
4
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Contents
Chapter 1: Introduction to the 1400 Series Digital Deskphones...........................................7
Overview of phone buttons and features..........................................................................................................7
LEDs...............................................................................................................................................................10
Scrolling and navigation..................................................................................................................................11
Paper labels.....................................................................................................................................................11
Chapter 2: Making calls..........................................................................................................13
Making a call...................................................................................................................................................13
Redialing a number.........................................................................................................................................13
Calling a person from the contacts list............................................................................................................13
Calling a person from the call log....................................................................................................................14
Chapter 3: Handling calls.......................................................................................................15
Answering a call..............................................................................................................................................15
Sending an incoming call directly to voice mail...............................................................................................15
Muting a call....................................................................................................................................................16
Putting a call on hold.......................................................................................................................................16
Transferring a call............................................................................................................................................16
Chapter 4: Conference calls...................................................................................................19
Making a conference call................................................................................................................................19
Adding a person on hold to a conference call.................................................................................................19
Putting a conference call on hold....................................................................................................................20
Dropping the last person added to a conference call......................................................................................20
Chapter 5: Getting your messages........................................................................................21
Logging into your voice mail............................................................................................................................21
Chapter 6: Bridged call appearances....................................................................................23
Answering a call on a bridged call appearance...............................................................................................23
Joining a call on a bridged call appearance....................................................................................................23
Making an outgoing call on a bridged call appearance...................................................................................24
Chapter 7: Contacts................................................................................................................25
Viewing contact details....................................................................................................................................25
Adding a new contact......................................................................................................................................25
Editing a contact..............................................................................................................................................26
Deleting a contact...........................................................................................................................................27
Adding an entry from the call to your contacts list...........................................................................................27
Chapter 8: Call log...................................................................................................................29
Viewing the Call Log........................................................................................................................................29
Viewing call log details....................................................................................................................................29
Adding an entry from the call to your contacts list...........................................................................................30
Removing an entry from the call log................................................................................................................30
Clearing all entries from the call log................................................................................................................30
Turning call logging on or off...........................................................................................................................31
Chapter 9: Advanced telephone features..............................................................................33
Avaya 1400 Series Digital Deskphone User Guide
September 2010
5
Forwarding a call.............................................................................................................................................33
Send all calls...................................................................................................................................................33
Calling a person from the corporate directory.................................................................................................34
Activating Extension to Cellular (EC500)........................................................................................................34
Chapter 10: Avaya menu.........................................................................................................35
Adjusting the brightness or contrast of the display..........................................................................................35
Changing the ring pattern................................................................................................................................36
Turning button click sounds on and off............................................................................................................36
Turning error tones on or off............................................................................................................................37
Turning visual alerting on or off.......................................................................................................................37
Turning audible alerting on or off.....................................................................................................................37
Setting the audio path.....................................................................................................................................38
Setting the phone behavior when making a call from your contacts list..........................................................38
Setting the phone screen behavior.................................................................................................................39
Turning remote headset on or off....................................................................................................................39
Changing the language...................................................................................................................................40
Setting audio levels on the handset, headset, and speaker............................................................................40
Verifying telephone operation..........................................................................................................................41
Erasing personalized settings.........................................................................................................................42
Chapter 11: DBM32 button module........................................................................................45
Answering a call..............................................................................................................................................46
Making a call using an abbreviated dial button...............................................................................................46
Accessing features..........................................................................................................................................46
Index.........................................................................................................................................49
6
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 1: Introduction to the 1400 Series
Digital Deskphones
This user guide is written for the 1408 and 1416 Digital Deskphones.These deskphones put
convenient features and capabilities at your fingertips, including a phone screen to view and
manage your calls, a contacts list, a call log, a menu of options and settings to customize your
phone, and access to your voice mail.
Not all features described in this user guide may be available on your telephone. If you find
that a feature is not available, contact your system administrator.
Overview of phone buttons and features
Avaya 1408 Digital Deskphone
Avaya 1400 Series Digital Deskphone User Guide
September 2010
7
Introduction to the 1400 Series Digital Deskphones
Avaya 1416 Digital Deskphone
No.
8
Name
Description
1
Message Waiting
Indicator
An illuminated red light in the upper-right corner of your
phone indicates you have voicemail messages waiting. If
Visual Alerting is enabled, this light flashes when you
receive an incoming call. In addition to the Message Waiting
Indicator, the Message button is also illuminated when you
have voice mail messages waiting,
2
Phone Display
There are 3 (1408) or 4 (1416) lines in the phone display.
When the phone is idle, the top line shows the number of
missed calls. The top line also shows the primary extension
and the time and date as well as any system messages.
The middle line (1408) or middle two lines (1416) display
application-specific information. The bottom line displays
the softkey labels.
3
Softkeys
Press the softkeys to select the softkey labels. The softkey
labels show you the action that each softkey produces. The
labels and the actions vary depending on the object that is
selected.
4
OK
Press the OK button for a shortcut to an action. For
example, when you select a call log entry, pressing the OK
button dials the number.
5
Phone/Exit
Press the Phone/Exit button to view and manage your
calls. For example, if you are viewing a menu, pressing the
Phone/Exit button switches the phone display back to the
home screen.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Overview of phone buttons and features
No.
Name
Description
6
Feature Buttons and There are 8 (1408) or 16 (1416) buttons that can be
Call Appearance
programmed as either call appearance buttons or feature
Buttons
buttons. Press a call appearance button to make or answer
a call or resume a call on hold. Press a labeled feature
button to enable or disable that feature. The feature buttons
provide access to the Avaya call management system
features that have been administered for your extension.
The green LED next to each feature button indicates if the
feature is currently on or off. If the light is on, the feature is
on. For more information about the feature buttons, see
Advanced telephone features on page 33.
7
Hold
Press the Hold button to put the active call on hold.
8
Conference
Press the Conference button to add another party to an
existing call.
9
Transfer
Press the Transfer button to transfer a call to another
number.
10
Drop
Press the Drop button to drop the active call. While on a
conference call, press the Drop button to drop the last
person added to the conference call. See Dropping the last
person added to a conference call on page 20 for more
information.
11
Microphone
The omnidirectional microphone sends and receives
signals from all directions.
12
Headset
Press the Headset button to use the headset if it is
connected. Only HIC headset cords are compatible with
your phone.
13
Volume
Press + or - on the Volume button while active on the
handset, headset or speaker to adjust the volume. To adjust
the volume of the ringer, press + or - on the volume button
while the handset, headset, and speaker are active.
14
Mute
Press the Mute button to mute a call in progress. To take a
call off mute, press Mute again.
15
Speaker
Press the Speaker button to use the speakerphone. To take
a call off speakerphone, lift the handset or press the
Headset button.
16
Redial
Press the Redial button to dial the last number you dialed.
17
Call Log
Press the Call Log button to view a list of all, answered,
unanswered, and outgoing calls. If there are bridged call
appearances configured on your telephone, you are also
able to view a list of bridged calls.
18
Contacts
Press the Contacts button to view the entries in your
contact list.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
9
Introduction to the 1400 Series Digital Deskphones
No.
Name
Description
19
Avaya Menu
Press the A button to access the Avaya menu. The Avaya
menu provides options that allow you to perform tasks such
as customize telephone settings, configure call logging,
select the display language, and verify telephone operation.
20
Message
Press the Message button to connect directly to your voice
mail system. This button is illuminated when you have voice
mail messages waiting.
21
Navigation Arrows
Press the up and down navigation arrows to scroll through
lists. Press the right and left navigation arrows to navigate
between different views of an application, to move the
cursor during text input, or to turn an option on or off.
LEDs
Each call appearance button and feature button has two LEDs, one green and one red, to
indicate the status of the call appearance or feature. The status is identified by whether the
LED is on, off, or blinking as described in the following tables.
Table 1: Call appearance button LEDs
LED
Description
Steady green
Call appearance is active.
Slow blinking green
Call appearance is ringing.
Fast blinking green
Call appearance is on hold.
Very fast blinking green
Conference or Transfer is pending.
Steady red
Call appearance is selected and will be used when you go offhook. It remains steady red while you use the call appearance.
Off
Call appearance is available.
Table 2: Feature button LEDs
LED
10
Description
Steady green
Feature is active.
Blinking green
Feature is pending (request is being processed and not
immediately available).
Blinking red
Feature is shown on the phone display.
Off
Feature is not active.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Scrolling and navigation
Scrolling and navigation
To navigate through the options and features on your telephone display, use the navigation
arrows to scroll and the OK button to select lines or options.
A navigation icon appears in the phone display to indicate that you can scroll to more options or
information. Use the right and left navigation arrows to go to other screens or to move the
cursor right or left when entering text. When you scroll to a line on the display, that line is
selected.
The softkey labels will change according to the options available for the selected line. The OK
button is a shortcut for the default action. For example, when you select an entry in your
contacts list, pressing the OK button places a call to that person.
Paper labels
Next to each call appearance button and feature button is a paper label. The label identifies
the call appearance number or the feature that has been programmed on the button by your
system administrator. You can remove the labels if you want to change a label or write on a
blank one. Printed labels are also available for your telephone. See your system administrator
for more information.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
11
Introduction to the 1400 Series Digital Deskphones
12
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 2: Making calls
Use the procedures in this chapter to make calls from your telephone.
Making a call
If you are not on a call, simply dial the number you want to call.
1. Do one of the following:
• Lift the handset.
• Press the Speaker button.
• Press the Headset button.
• Press an available call appearance button.
2. Dial the number you want to call.
Redialing a number
To redial the last number dialed, press the Redial button.
Calling a person from the contacts list
1. Press the Contacts button.
2. Locate the contact you want by starting to type the person's name as it is listed.
For example, if you added John Smith to your Contacts List as “Smith, John” you
would start typing his last name rather than his first name. Each time you press the
Avaya 1400 Series Digital Deskphone User Guide
September 2010
13
Making calls
dialpad, the list display shifts to match your input. Alternately, you can scroll up or
down to locate the contact.
3. Scroll up or down to select the person or number you want to call.
4. Press the OK button or the Call softkey.
Calling a person from the call log
1. Press the Call Log button.
2. Scroll to the left or right to view a separate list of all, un-answered, answered, or
outgoing calls.
3. Scroll up or down to select the person or number you want to call.
4. Press the Call softkey or the OK button.
14
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 3: Handling calls
Use the procedures in this chapter to handle calls from your telephone. This includes
procedures such as answering a call, muting a call, and transferring a call.
Answering a call
When you receive an incoming call, the green LED associated with the call will flash. The
incoming call is usually selected automatically. However, if you are already on a call or if you
receive more than one incoming call at a time, you may need to select the call you want to
answer manually.
• If you are not on another call, do one of the following:
- Lift the handset.
- Press the call appearance button whose green LED flashes for the incoming call.
- Press the Speaker button to answer using the speakerphone.
- Press the Headset button to answer using the headset.
- If you are using a wireless headset, press the ON button.
• If you are on another call, press the call appearance button whose green LED flashes
for the incoming call.
Note:
If the Auto Hold (Communication Manager) feature is enabled by your system
administrator, you can answer another call without first putting an active call on hold.
If Auto Hold is not enabled, you must put your active call on hold before answering
the incoming call; otherwise, you will drop the active call when you answer the other
one.
Sending an incoming call directly to voice mail
Press the To Vmail softkey to send an incoming call directly to voice mail without
answering.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
15
Handling calls
To do this, your voice mail must be administered as the first entry in your coverage
path. See your system administrator for more information.
Muting a call
If a call is on mute and you switch between the handset, headset, or speakerphone, the mute
will be turned off. When the Mute button light is on, the call is muted.
1. Press the Mute button during a call so that the other person cannot hear you.
2. Press the Mute button again to unmute the call.
Putting a call on hold
1. Press the Hold button to put your active call on hold.
The fast blinking green LED next to the call appearance button indicates the call is
on hold.
2. To resume the call, press the call appearance button for the call on hold.
Transferring a call
1. If the call you want to transfer is not your active call, press the call appearance button
for the call you want to transfer.
2. Press the Transfer button.
The very fast blinking green LED next to the call appearance button indicates the
call is being transferred.
3. Dial the telephone number, call the person from the contacts list, or call the person
from the call log.
16
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Transferring a call
Note:
To transfer the call to a call that is on hold, press the call appearance button for the
call that is on hold.
4. Press the Transfer button to transfer the call.
Once the transfer is complete, Transfer completed appears in the phone display.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
17
Handling calls
18
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 4: Conference calls
You can use conference calls to speak with up to five people in different locations on the same
call . Additional conferencing options may be available through Expanded Meet-Me
Conferencing. Contact your system administrator for more information about this feature.
Making a conference call
1. While active on a call, press the Conference button.
The very fast blinking green LED next to the call appearance button indicates the
call is being conferenced.
2. Do one of the following:
• Dial the telephone number.
• Call the person from the contacts list.
• Call the person from the call log.
3. Press the Conference button to add the person to the existing call.
Adding a person on hold to a conference call
1. Select the call appearance button for your active conference call.
2. Press the Conference button.
The active conference call is put on soft hold.
3. Press the call appearance button of the call on hold.
Be sure not to choose the call appearance button for the call that is on soft hold.
4. Press the Conference button again to add the person to the conference call.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
19
Conference calls
Putting a conference call on hold
When you put a conference call on hold, the other parties can still talk to each other.
1. Press the Hold button during a conference call.
The blinking green LED next to the call appearance button indicates the conference
is on hold.
2. Press the call appearance button to resume the conference call.
Dropping the last person added to a conference call
1. Press Drop.
2. While active on a conference call, press the Drop button.
20
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 5: Getting your messages
Use the Message button to connect to your voice mail system. When you have messages
waiting, the Message button is illuminated. The red light on the upper right-hand corner of your
telephone is also illuminated when you have messages waiting. Your messages are an
administered function. Contact your system administrator with any questions.
Logging into your voice mail
1. To log in to your voice mail, press the Message button.
2. Follow the voice prompts from your voice mail system.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
21
Getting your messages
22
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 6: Bridged call appearances
Your phone may show one or more bridged call appearances on the display screen in addition
to your own call appearances. A bridged call appearance typically belongs to someone else,
but bridging allows you to see if that call appearance is in use, answer calls on that appearance,
or join a call in progress on that call appearance from your telephone. You can also make
outgoing calls on a bridged call appearance when it is not in use.
Answering a call on a bridged call appearance
Answering a call on a bridged call appearance is basically the same as a call on a primary
line. If the ringing bridged call appearance is selected, you can answer by picking up the
handset or by pressing the Speaker or Headset button.
To answer a call on a bridged call appearance, press the call appearance button
associated with the bridged call appearance.
Note:
The ringing bridged call appearance may be selected automatically if there are no
other active calls. If you are on another call when a call comes in to a bridged call
appearance, you may have to select the ringing bridged call appearance button (just
like for an incoming call to a primary line).
Joining a call on a bridged call appearance
1. Scroll to the call in progress that you want to join.
2. Press the call appearance button for the bridged call appearance.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
23
Bridged call appearances
Making an outgoing call on a bridged call appearance
When you make a call on a bridged call appearance, you are using another person’s call
appearance. The caller ID may show the call as coming from you or coming from the person
whose call appearance you are using. If you have any questions about how the name or
extension displays to the person you are calling, contact your system administrator.
1. Press the call appearance button associated with the bridged call appearance.
2. Dial the telephone number, or call the person from the contacts list, or call the person
from the call log.
24
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 7: Contacts
You can save up to 100 names and telephone numbers. For additional information, see Calling
a person from the contacts list on page 13.
Viewing contact details
1. Press the Contacts button.
2. Scroll to the contact you want to view.
Names are listed alphabetically by last name. To return to the top of the list, press
the Contacts button again.
3. Do one of the following:
• For the 1416 telephone, press the Details softkey to see the contact name and
number.
• For the 1408 telephone, press the Details softkey to see the contact number,
and then scroll down to see the contact name.
Adding a new contact
1. Press the Contacts button.
Note:
If this is the first contact you are adding, skip step 2.
2. Press the More softkey.
If the More softkey is not displayed and this is not your first contact, press the
Contacts button again.
3. Press the New softkey.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
25
Contacts
4. Enter the name using the dialpad. To enter characters using the dialpad:
a. Press the number key that corresponds to the letter or number you want to enter
until the letter or number is displayed.
b. Pause before entering the next character if the characters are on the same key.
c. To enter a space, press 0.
d. Enter remaining letters or numbers.
e. Press Bksp to delete the last character.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle of
the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor.
5. Press the OK button or the OK softkey.
6. Enter the telephone number as you would if you were dialing it directly.
7. Press the Save softkey or the OK button.
Editing a contact
1. Press the Contacts button.
2. Scroll to the contact you want to edit.
3. Press the More softkey.
4. Press the Details softkey.
5. Press the Edit softkey.
6. Scroll up or down to choose the field you want to edit.
7. Use the dialpad and softkeys to make changes to the contact information.
8. Press the Save softkey or the OK button to save your changes.
26
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Deleting a contact
Deleting a contact
1. Press the Contacts button.
2. Scroll to the contact you want to delete.
3. Press More > Delete.
4. Press the Delete softkey again to confirm.
Note:
If you press the Cancel softkey prior to pressing the Delete softkey, your contact
information will not be removed.
Adding an entry from the call to your contacts list
1. Press the Call Log button.
2. Scroll to the number you want to add to your contacts list.
3. Press the Details softkey.
4. Press the +Contact softkey.
If your contacts list is full, the +Contact softkey is not displayed.
5. To edit the name or number, scroll up or down and edit as appropriate.
6. Press the Save softkey or the OK button.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
27
Contacts
28
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 8: Call log
You can use the call log to view separate lists of your answered, unanswered, outgoing, or
bridged calls. See Turning call logging on or off on page 31 for information about turning call
logging on and off for different call types.
Viewing the Call Log
1. Press the Call Log button.
You can go to the top of the list by pressing the Call Log button again.
2. Scroll to the right or left to view separate lists of answered, unanswered, outgoing, or
bridged calls.
Viewing call log details
1. Press the Call Log button.
2. Scroll to the number you want to view.
3. Do one of the following:
• For the 1416 telephone, press the Details softkey to view the time, date, and
duration of the call.
• For the 1408 telephone, press the Details softkey to view the name. Then
scroll down one line at a time to view the number, date and time, and duration of
the call.
4. Press the Back softkey to return to the list view.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
29
Call log
Adding an entry from the call to your contacts list
1. Press the Call Log button.
2. Scroll to the number you want to add to your contacts list.
3. Press the Details softkey.
4. Press the +Contact softkey.
If your contacts list is full, the +Contact softkey is not displayed.
5. To edit the name or number, scroll up or down and edit as appropriate.
6. Press the Save softkey or the OK button.
Removing an entry from the call log
1. Press the Call Log button.
2. Select the number you want to delete.
3. Press More > Delete.
4. Press the Delete softkey again to confirm.
Clearing all entries from the call log
Clearing all entries from a call log deletes all of the entries for the specific list you are viewing.
For example, if you are viewing the Outgoing calls list, only outgoing calls are deleted from the
call log. You are also able to clear all calls from the entire call log.
1. Press the Call Log button.
2. To delete entries from a specific list:
a. Select the list whose entries you want to delete.
30
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Turning call logging on or off
b. Press More > Del All to delete all of the entries in the list you are viewing.
c. Press the Del All softkey again to confirm.
3. To delete all entries in the entire call log:
a. Press More > Del All to delete all entries.
b. Press the Del All softkey again to confirm.
Turning call logging on or off
You can set the call logging feature to log answered, unanswered, outgoing, or bridged calls.
The option to log bridged calls is available only if your telephone is configured with bridged call
appearances. You can turn call logging on or off for any of these call types.
1. Press the A button.
2. Scroll to Application.
3. Press the Select softkey or the OK button.
4. To turn the Log-Answered option on or off:
a. With Log-Answered displayed, press the On/Off softkey, the OK button, or the
right or left navigation arrow to turn Log-Answered on or off.
When set to On, all answered calls are stored in the call log.
b. Press the Done softkey to save your changes.
5. To turn the Log-Unanswered option on or off:
a. Scroll to Log-Unanswered.
b. Press the On/Off softkey, the OK button, or the right or left navigation arrow to
turn Log-Un-answered on or off.
When set to On, all unanswered calls are stored in the call log.
c. Press the Done softkey to save your changes.
6. To turn the Log-Outgoing option on or off:
a. Scroll to Log-Outgoing.
b. Press the On/Off softkey, the OK button, or the right or left navigation arrow to
turn Log-Outgoing on or off.
When set to On, all outgoing calls are stored in the call log.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
31
Call log
c. Press the Done softkey to save your changes.
7. To turn the Log-Bridged option on or off (available only if your telephone has bridged
call appearances):
a. Scroll to Log-Bridged.
b. Press the On/Off softkey, the OK button, or the right or left navigation arrow to
turn Log-Bridged on or off.
When set to On, all incoming and outgoing calls on bridged call appearances
are stored in the call log.
c. Press the Done softkey to save your changes.
32
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 9: Advanced telephone features
Avaya call management systems provide many advanced telephone features such as
Directory, Call Forwarding, and Abbreviated Dial buttons.These features are administered on
the feature buttons on your telephone. The features are identified on the associated paper
labels.
The features that are available to you depend on what your administrator has assigned to your
telephone. A few of the most commonly administered features are explained below. For more
information about all the features that are available for your extension, contact your system
administrator.
Forwarding a call
The Call Forward feature allows you to forward your incoming calls to another number. You
must enter the telephone number where the calls will be forwarded each time you use this
feature. You can forward calls only to internal numbers.
1. To turn call forwarding on, press the CFrwd feature button.
You hear a dial tone prompting you to dial the forwarding number.
2. Dial the number you want to forward your calls to.
After you dial the number, you hear a confirmation tone. The green LED next to the
feature button turns on.
3. To turn call forwarding off, press the CFrwd feature button.
The green LED next to the feature button turns off.
Send all calls
The Send All Calls (SAC) feature allows you to send all of your incoming calls directly to a
predefined coverage number, typically your voice mail. Incoming calls ring once at your
extension and then go directly to a number which is set by your system administrator.
• To send all calls to coverage, press the SAC feature button.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
33
Advanced telephone features
The green LED next to the feature button turns on.
• To turn the feature off, press the SAC feature button.
The green LED next to the feature button turns off.
Calling a person from the corporate directory
The Directory feature allows you to dial other users in your system by name.
1. Press the Directory feature button.
2. Use the dialpad keys to start spelling the last name of the person you want to call.
Press each dialpad key one time for each corresponding letter. For example, for
“Hill”, press 4,4,5,5.
3. Press the Next feature button to view the next name alphabetically in the directory, if
necessary.
4. Press the Make Call feature button when you see the name you want.
5. To exit the Directory, press the Phone/Exit button or the Exit softkey.
Activating Extension to Cellular (EC500)
The Extension to Cellular (EC500) feature allows you to have incoming calls ring on your office
telephone and your cell phone at the same time. This allows you to answer office calls while
you are away from your desk. The cell phone number is programmed by your system
administrator.
1. To turn the EC500 feature on, press the EC500 feature button.
The green LED next to the feature button turns on.
2. To turn the EC500 feature off, press the EC500 feature button.
The green LED next to the feature button turns off.
34
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 10: Avaya menu
Use the Avaya menu to perform tasks such as adjust and customize phone settings, select the
display language, turn call logging on or off for different call types, and set visual and audible
alerting.
The Avaya menu has four sub-menus:
Screens/
Sounds
Lets you adjust the display brightness and contrast, select your ringing
pattern, turn button click sounds on and off, and turn error tones on and off.
Call Settings
Lets you turn visual alerting, audible alerting, show phone screen, and stay
in contacts on or off; and set the audio path to speakerphone or headset.
Application
Lets you turn call logging on and off for answered, unanswered, outgoing,
and bridged calls.
Advance
Lets you select the display language, perform a telephone self-test, turn the
remote headset on or off, erase entries in your contacts list and call log, and
customize other telephone settings.
Note:
The sub-menus that appear depend on how your extension was administered. Some submenus may not be available.
Adjusting the brightness or contrast of the display
1. Press the A button.
2. With Screens/Sounds displayed, press the Select softkey or the OK button.
3. Select Brightness or scroll to select Contrast.
4. Press the Select softkey or the OK button.
5. Scroll to the right or left to adjust the brightness or contrast.
6. Press the Done softkey to save your changes.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
35
Avaya menu
Changing the ring pattern
1. Press the A button.
2. With Screens/Sounds displayed, press the Select softkey or the OK button.
3. Scroll to Personal Ring.
4. Press the Select softkey or the OK button.
5. Scroll up or down to see a list of the available ring patterns. There are 8 personal
ring patterns to choose from.
6. Select a ring pattern, and press the Play softkey to listen to it.
7. Press the Play softkey to hear it again.
8. Press the Save softkey to make it your ring pattern.
9. Press the Done softkey to save your changes.
Turning button click sounds on and off
1. Press the A button.
2. With Screens/Sounds displayed, press the Select softkey or the OK button.
3. Scroll to Button Clicks.
4. Press the On/Off softkey, the OK button, or the right or left navigation arrow to turn
sounds on or off.
5. Press the Done softkey to save your changes.
36
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Turning error tones on or off
Turning error tones on or off
1. Press the A button.
2. With Screens/Sounds displayed, press the Select softkey or the OK button.
3. Scroll to Error Tones.
4. Press the On/Off softkey, the OK button, or the right or left navigation arrow to turn
error tones on or off.
5. Press the Done softkey to save your changes.
Turning visual alerting on or off
When the Visual Alert option is turned on, incoming calls cause the LED in the top right corner of
the phone to flash. You can turn Visual Alert on or off.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Scroll to Visual Alert.
5. Press the On/Off softkey, the OK button, or the right or left navigation arrow to turn
visual alerting on or off.
6. Press the Done softkey to save your changes.
Turning audible alerting on or off
When the Audible Alert option is turned on, the telephone rings when an incoming call arrives.
When the Audible Alert option is turned off, the telephone does not ring when a call arrives,
and the Visual Alert option is automatically turned on.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
37
Avaya menu
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Scroll to Audible Alert.
5. Press the On/Off softkey, the OK button, or the right or left navigation arrow to turn
Audible Alert on or off.
6. Press the Done softkey to save your changes.
Setting the audio path
You can set the audio path of your phone so that when you initiate a call, the audio path
automatically goes to either the speakerphone or your headset.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Scroll to Audio Path.
5. Press the Change softkey or the OK button to toggle between Headset and
Speaker.
6. Press the Done softkey to save your changes.
Setting the phone behavior when making a call from your
contacts list
When the Stay in Contacts option is turned on, when you make a call from your contacts list,
the telephone will stay in the contacts application. If you want the telephone to exit the contacts
application when you make a call from your contacts list, turn this option off.
38
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Setting the phone screen behavior
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Scroll to Stay in Contacts.
5. Press the On/Off softkey, the OK button, or the right or left navigation arrow to turn
Stay in Contacts on or off.
6. Press the Done softkey to save your changes.
Setting the phone screen behavior
When the Show Phone Screen option is turned on, when an incoming call arrives, the
telephone display will exit the contacts application, call log, or any menu that is open. If you
want to remain in the contacts application, call log, or menu when an incoming call arrives,
turn this option off.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Scroll to Show Phone Screen.
5. Press the On/Off softkey, the OK button, or the right or left navigation arrow to turn
Show Phone Screen on or off.
6. Press the Done softkey to save your changes.
Turning remote headset on or off
1. Press the A button.
2. Scroll to Advance.
3. Press the Select softkey or the OK button.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
39
Avaya menu
4. Scroll to Remote Headset.
5. Press the Select softkey or the OK button.
6. Press the On/Off softkey, the OK button, or the right or left navigation arrow to turn
the remote headset on or off.
7. Press the Done softkey when finished.
Changing the language
1. Press the A button.
2. Scroll to Advance.
3. Press the Select softkey or the OK button.
4. Scroll to Language.
5. Press the Select softkey or the OK button.
6. Scroll up or down to select the desired language.
Note:
Other languages may be available. Contact your system administrator.
7. Press the Select softkey or the OK button to change to the selected language.
8. Press the Done softkey to save your changes.
Setting audio levels on the handset, headset, and speaker
Use the audio settings to enable optimum audio levels for different environments. Automatic
gain control (AGC) helps to maintain a constant audio level by automatically increasing or
decreasing the gain depending upon the signal level. For high level signals, the gain is reduced
and for low level signals, the gain is increased.
1. Press the A button.
2. Scroll to Advance.
3. Press the Select softkey or the OK button.
40
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Verifying telephone operation
4. Scroll to Audio.
5. Press the Select softkey or the OK button.
6. To set automatic gain control for the handset, with Handset AGC Enabled
displayed, press the On/Off softkey, the OK button, or the right or left navigation
arrow to turn the option on or off.
Set to On to enable AGC on the handset, or set to Off to disable AGC on the
handset. The default setting is On.
7. To set automatic gain control for the headset:
a. Scroll to Headset AGC Enabled.
b. Press the On/Off softkey, the OK button, or the right or left navigation arrow to
turn the option on or off.
Set to On to enable AGC on the headset, or set to Off to disable AGC on the
headset. The default setting is On.
8. To set automatic gain control for the speaker:
a. Scroll to Speaker AGC Enabled.
b. Press the On/Off softkey, the OK button, or the right or left navigation arrow to
turn the option on or off.
Set to On to enable AGC on the speaker, or set to Off to disable AGC on the
speaker. The default setting is On.
Verifying telephone operation
Use the Self Test option to verify the operation of the telephone’s lamps and display
components. This option also provides information regarding the telephone model, firmware
version, bootloader version, language text file, and font files.
1. Press the A button.
2. Scroll to Advance.
3. Press the Select softkey or the OK button.
4. Scroll to Selt Test.
5. Press the Test softkey or the OK button.
6. Press the Test softkey or the OK button to perform a self test of the telephone's
lamps and display.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
41
Avaya menu
7. Scroll through the menu to see the firmware version, bootloader version, language
text file, and font file versions.
8. Press the Done softkey when finished.
Erasing personalized settings
Use the Erase option to erase some or all of your personalized settings, including entries in
your contact list, call log, language, and options such as customized ring tones and audible
alerts.
1. Press the A button.
2. Scroll to Advance.
3. Press the Select softkey or the OK button.
4. Scroll to Erase.
5. Press the Select softkey or the OK button.
6. To erase all entries in your contact list:
a. With Contacts displayed, press the Erase softkey or the OK button.
b. Press the Erase softkey or the OK button again to confirm.
7. To erase all entries in your call log:
a. Scroll to Call Log.
b. Press the Erase softkey or the OK button.
c. Press the Erase softkey or the OK button again to confirm.
8. To erase your personalized settings (excluding language and contrast) and return
them to the default values:
a. Scroll to Options.
b. Press the Erase softkey or the OK button.
c. Press the Erase softkey or the OK button again to confirm.
9. To erase your customized language setting and reset it to English:
a. Scroll to Language.
b. Press the Erase softkey or the OK button.
42
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Erasing personalized settings
c. Press the Erase softkey or the OK button again to confirm.
10. To erase entries in your contact list and call log, all personalized settings, and your
customized language setting:
a. Scroll to All.
b. Press the Erase softkey or the OK button.
c. Press the Erase softkey or the OK button again to confirm.
Avaya 1400 Series Digital Deskphone User Guide
September 2010
43
Avaya menu
44
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Chapter 11: DBM32 button module
The DBM32 button module extends the number of call appearances and feature buttons on
your Avaya 1416 telephone. It provides 32 additional lines for incoming calls, outgoing calls,
and call features. You can connect up to two button modules to the 1416 telephone. Typical
uses are to provide:
• additional lines for calls bridged from one or more other extensions,
• abbreviated dialing buttons, and
• buttons to access additional communication system features like call forwarding.
Note that call appearances and features the button module displays also appear in the call
appearances and features lists on your telephone.
To use only with Avaya Digital Phone, AVAYA INC, model 1416.
1
Call appearance or feature buttons with LEDs
Avaya 1400 Series Digital Deskphone User Guide
September 2010
45
DBM32 button module
2
Area for paper button labels
Note:
The BM32 button module available for use with the Avaya 1616 telephone cannot be used
with the Avaya 1416 telephone.
Answering a call
• To answer a call using the speakerphone, press the flashing call appearance button on
the button module.
• To answer a call using the handset, pick up the handset and then press the flashing
call appearance button on the button module.
Making a call using an abbreviated dial button
Abbreviated dial (AD) buttons provide one-button dialing of commonly called numbers. If your
system administrator has set up AD buttons, you can press a single button on the button
module to dial a number.
• To make a call using the handset, lift the handset and then press the button that
corresponds to the name or number of the person you want to call.
• To make a call using the speakerphone, press the button that corresponds to the name
or number of the person you want to call.
Note:
If your system administrator has set up the Program Abbreviated Dialing feature on
your telephone, you can program the numbers for AD buttons yourself. See your
system administrator for more information.
Accessing features
Your button module might have feature buttons for features like Call Forwarding, Call Pickup,
Go to Coverage, or Auto Callback.
To use a feature button, press the button next to the feature you want to activate.
46
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Accessing features
Avaya 1400 Series Digital Deskphone User Guide
September 2010
47
DBM32 button module
48
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Index
A
advance options
changing language ...............................................40
setting audible alert ..............................................38
advanced telephone features
about ....................................................................33
applications
call logging ...........................................................31
contacts ................................................................25
audible alert
setting ..................................................................38
audio paths
configuring ...........................................................38
Avaya menu ..........................................................35–37
adjusting brightness or contrast ...........................35
button click sounds ..............................................36
changing ring pattern ...........................................36
error tones ............................................................37
B
BM32 button module
accessing features ...............................................46
answering a call ...................................................46
bridged call appearance
about ....................................................................23
answering .............................................................23
joining ...................................................................23
button click sounds
configuring ...........................................................36
buttons .........................................................................7
C
call appearance button LEDs
about ....................................................................10
call center audio mode, setting ...................................40
call log
about ....................................................................29
calling a person ....................................................14
clearing entries .....................................................30
log bridged calls ...................................................31
removing an entry ................................................30
turning off .............................................................31
viewing .................................................................29
Avaya 1400 Series Digital Deskphone User Guide
viewing details ......................................................29
call settings
configuring audio path ..........................................38
configuring visual alerts .......................................37
setting stay in contacts .........................................39
call settings options
setting show phone screen ..................................39
calling a person ...............................................13, 14, 34
from the call log ....................................................14
from the contacts list ............................................13
conference calls
about ....................................................................19
dropping the last person ......................................20
making .................................................................19
putting a call on hold ............................................20
conference calls, adding a person on hold .................19
contacts
about ....................................................................25
adding a new person ............................................25
adding from the Call Log ................................27, 30
calling a person ....................................................13
deleting ................................................................27
editing ..................................................................26
selecting ...............................................................25
coverage .....................................................................33
D
DBM32 button module
making a call with an AD button ...........................46
directory
calling a person ....................................................34
display
adjusting brightness .............................................35
adjusting contrast .................................................35
E
error tones
turning off .............................................................37
F
feature button LEDs
about ....................................................................10
forwarding
September 2010
49
a call .....................................................................33
muting calls ................................................................16
G
N
getting your messages ...............................................21
navigation arrows
right and left .........................................................11
up and down .........................................................11
H
handling calls ..............................................................15
handset transmit noise reduction, setting ...................40
headset receive volume, setting .................................40
headset transmit noise reduction, setting ...................40
hold
conference calls ...................................................20
O
outgoing calls ........................................................13, 24
making a call ........................................................13
redialing a number ...............................................13
overview .......................................................................7
P
I
incoming calls
answering .............................................................15
directing to multiple telephones ...........................34
forwarding ............................................................33
sending directly to voice mail ...............................15
sending to coverage .............................................33
transferring ...........................................................16
K
keys ..............................................................................7
paper labels ................................................................11
personalized settings
erasing .................................................................42
putting a call on hold ..................................................16
R
redial ...........................................................................13
remote headset
turning on or off ....................................................39
ring pattern
changing ..............................................................36
S
L
M
SAC ............................................................................33
scrolling and navigation
about ....................................................................11
show phone screen
setting ..................................................................39
speaker acoustical setting ..........................................40
stay in contacts
setting ..................................................................39
making calls ................................................................13
T
language
changing ..............................................................40
LEDs
about ....................................................................10
legal notices .................................................................2
telephone operation
verifying ................................................................41
Transfer ......................................................................16
V
visual alerts
configuring ...........................................................37
Voice mail
logging in ..............................................................21
50
Avaya 1400 Series Digital Deskphone User Guide
September 2010
Download PDF

advertising