User guide | Avaya 1608-I IP Phone User Manual

Avaya 1608/1608-I IP Deskphone User
Guide
16-601446
Issue 2
February 2010
© 2009 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in
this document was complete and accurate at the time of printing, Avaya
Inc. can assume no liability for any errors. Changes and corrections to
the information in this document might be incorporated in future
releases.
Note:
Using a cell, mobile, or GSM phone, or a two-way radio in close
proximity to an Avaya IP telephone might cause interference.
Documentation disclaimer
Avaya Inc. is not responsible for any modifications, additions, or
deletions to the original published version of this documentation unless
such modifications, additions, or deletions were performed by Avaya.
Customer and/or End User agree to indemnify and hold harmless
Avaya, Avaya's agents, servants and employees against all claims,
lawsuits, demands and judgments arising out of, or in connection with,
subsequent modifications, additions or deletions to this documentation
to the extent made by the Customer or End User.
Link disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked
Web sites referenced elsewhere within this documentation, and Avaya
does not necessarily endorse the products, services, or information
described or offered within them. We cannot guarantee that these links
will work all the time and we have no control over the availability of the
linked pages.
Warranty
Avaya Inc. provides a limited warranty on this product. Refer to your
sales agreement to establish the terms of the limited warranty. In
addition, Avaya’s standard warranty language, as well as information
regarding support for this product, while under warranty, is available
through the Avaya Support Web site: http://www.avaya.com/support
Licenses
Shrinkwrap License (SR). With respect to Software that contains
elements provided by third party suppliers, End User may install and
use the Software in accordance with the terms and conditions of the
applicable license agreements, such as "shrinkwrap" or "clickwrap"
license accompanying or applicable to the Software ("Shrinkwrap
License"). The text of the Shrinkwrap License will be available from
Avaya upon End User’s request (see “Third-party Components" for
more information).
Copyright
Except where expressly stated otherwise, the Product is protected by
copyright and other laws respecting proprietary rights. Unauthorized
reproduction, transfer, and or use can be a criminal, as well as a civil,
offense under the applicable law.
Third-party components
Certain software programs or portions thereof included in the Product
may contain software distributed under third party agreements ("Third
Party Components"), which may contain terms that expand or limit
rights to use certain portions of the Product ("Third Party Terms").
Information identifying Third Party Components and the Third Party
Terms that apply to them is available on the Avaya Support Web site:
http://www.avaya.com/support/ThirdPartyLicense/
Preventing toll fraud
"Toll fraud" is the unauthorized use of your telecommunications system
by an unauthorized party (for example, a person who is not a corporate
employee, agent, subcontractor, or is not working on your company's
behalf). Be aware that there can be a risk of toll fraud associated with
your system and that, if toll fraud occurs, it can result in substantial
additional charges for your telecommunications services.
Avaya fraud intervention
If you suspect that you are being victimized by toll fraud and you need
technical assistance or support, call Technical Service Center Toll
Fraud Intervention Hotline at +1-800-643-2353 for the United States
and Canada. For additional support telephone numbers, see the Avaya
Support Web site: http://www.avaya.com/support/
Suspected security vulnerabilities with Avaya Products should be
reported to Avaya by sending mail to: securityalerts@avaya.com.
USE OR INSTALLATION OF THE PRODUCT INDICATES THE END
USER'S ACCEPTANCE OF THE TERMS SET FORTH HEREIN AND
THE GENERAL LICENSE TERMS AVAILABLE ON THE AVAYA WEB
SITE http://www.avaya.com/support/LicenseInfo/ ("GENERAL
LICENSE TERMS"). IF YOU DO NOT WISH TO BE BOUND BY
THESE TERMS, YOU MUST RETURN THE PRODUCT(S) TO THE
POINT OF PURCHASE WITHIN TEN (10) DAYS OF DELIVERY FOR
A REFUND OR CREDIT.
Trademarks
Avaya grants End User a license within the scope of the license types
described below. The applicable number of licenses and units of
capacity for which the license is granted will be one (1), unless a
different number of licenses or units of capacity is specified in the
Documentation or other materials available to End User. "Designated
Processor" means a single stand-alone computing device. "Server"
means a Designated Processor that hosts a software application to be
accessed by multiple users. "Software" means the computer programs
in object code, originally licensed by Avaya and ultimately utilized by
End User, whether as stand-alone Products or pre-installed on
Hardware. "Hardware" means the standard hardware Products,
originally sold by Avaya and ultimately utilized by End User.
Contact Avaya Support
All other trademarks are the property of their respective owners.
Downloading documents
For the most current versions of documentation, see the Avaya Support
Web site: http://www.avaya.com/support
Avaya Inc. provides a telephone number for you to use to report
problems or to ask questions about your product. The support
telephone number is 1-800-242-2121 in the United States. For
additional support telephone numbers, see the Avaya Web site: http://
www.avaya.com/support
License types
Designated System(s) License (DS). End User may install and use
each copy of the Software on only one Designated Processor, unless
a different number of Designated Processors is indicated in the
Documentation or other materials available to End User. Avaya may
require the Designated Processor(s) to be identified by type, serial
number, feature key, location or other specific designation, or to be
provided by End User to Avaya through electronic means established
by Avaya specifically for this purpose.
2
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Contents
Chapter 1: Introduction to the 1608/1608-I IP Telephone......................................................5
Overview of phone buttons and features..........................................................................................................6
LEDs................................................................................................................................................................8
Icons in the telephone display..........................................................................................................................9
Scrolling and navigation..................................................................................................................................10
Paper labels....................................................................................................................................................10
Chapter 2: Logging in to and out of your telephone............................................................11
Logging in to your telephone..........................................................................................................................11
Logging out of your telephone........................................................................................................................11
Chapter 3: Making calls..........................................................................................................13
Making a call..................................................................................................................................................13
Clearing a number..........................................................................................................................................13
Redialing a number........................................................................................................................................13
Calling a person from the contacts list............................................................................................................14
Calling a person from the call log....................................................................................................................14
Chapter 4: Handling calls......................................................................................................15
Answering a call..............................................................................................................................................15
Sending an incoming call directly to voice mail..............................................................................................16
Ignoring an incoming call................................................................................................................................16
Muting a call....................................................................................................................................................16
Putting a call on hold......................................................................................................................................16
Transferring a call............................................................................................................................................17
Chapter 5: Conference calls..................................................................................................19
Making a conference call................................................................................................................................19
Adding a person on hold to a conference call................................................................................................19
Putting a conference call on hold....................................................................................................................20
Viewing conference details..............................................................................................................................20
Dropping the last person added from a conference call..................................................................................20
Dropping a person from a conference call......................................................................................................21
Silencing a person on a conference call........................................................................................................21
Chapter 6: Getting your messages........................................................................................23
Logging into your voice mail............................................................................................................................23
Chapter 7: Bridged call appearances....................................................................................25
Answering a call on a bridged call appearance..............................................................................................25
Joining a call on a bridged call appearance....................................................................................................25
Making an outgoing call on a bridged call appearance..................................................................................26
Chapter 8: Shared line appearances....................................................................................27
Answering a call on a shared line appearance..............................................................................................27
Joining a call on a shared line appearance....................................................................................................27
Making an outgoing call on a shared line appearance....................................................................................28
Chapter 9: Contacts................................................................................................................29
Viewing contacts details..................................................................................................................................29
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
3
Contents
Adding a new contact......................................................................................................................................29
Editing a contact..............................................................................................................................................30
Deleting a contact..........................................................................................................................................30
Chapter 10: Call log................................................................................................................33
Viewing the call log..........................................................................................................................................33
Viewing call log details....................................................................................................................................33
Adding an entry from the call log to your contacts list....................................................................................34
Removing an entry from the call log................................................................................................................34
Clearing all entries from the call log................................................................................................................34
Turning call logging on or off..........................................................................................................................35
Chapter 11: Advanced telephone features............................................................................37
Forwarding a call............................................................................................................................................37
Send all calls..................................................................................................................................................38
Calling a person from the corporate directory................................................................................................38
Activating Extension to Cellular (EC500)........................................................................................................38
Chapter 12: Features menu....................................................................................................41
Accessing the Features menu........................................................................................................................41
Chapter 13: Avaya Menu........................................................................................................43
Adjusting the brightness or contrast of the display..........................................................................................43
Changing the ring pattern................................................................................................................................44
Turning button click sounds on and off............................................................................................................44
Turning error tones on or off............................................................................................................................45
Turning the call timer on or off........................................................................................................................45
Turning visual alerting on or off......................................................................................................................45
Setting redial options......................................................................................................................................46
Setting the audio path....................................................................................................................................46
Turning show incoming call on or off..............................................................................................................47
Setting automatic gain control........................................................................................................................47
Changing the language..................................................................................................................................48
Viewing network information..........................................................................................................................48
Index.........................................................................................................................................49
4
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 1: Introduction to the 1608/1608-I IP
Telephone
The 1608/1608–I telephone is a multiline IP telephone for use with Avaya Communication
Manager or Avaya Distributed Office call processing systems. The 1608/1608- IP telephone
puts convenient features and capabilities at your fingertips, including a phone screen to view
and manage your calls, a contacts list, a call log, a menu of options and settings to customize
your phone, and access to your voice mail.
Not all features described in this user guide may be available on your telephone. If you find
that a feature is not available, contact your system administrator.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
5
Introduction to the 1608/1608-I IP Telephone
Overview of phone buttons and features
Name
6
Description
Message Waiting
Indicator
An illuminated red light in the upper-right corner of your
phone indicates you have voicemail messages waiting. If
Visual Alerting is enabled, this light flashes when you
receive an incoming call.
Phone Display
There are three lines in the phone display. When the phone
is idle, the top line shows the missed call icon with number
of calls missed and either the call forwarding icon, the Send
All Calls icon, or the EC500 icon when one of those features
is enabled. The top line also shows the primary extension
and the time and date as well as any system messages. The
middle line displays application-specific information. The
bottom line displays the softkey labels.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Overview of phone buttons and features
Name
Description
Softkeys
Press the softkeys to select the softkey labels. The softkey
labels show you the action that each softkey produces. The
labels and the actions vary depending on the object that is
selected.
Message
Press the Message button to connect directly to your
voicemail system.
Navigation Arrows
Press the up and down navigation arrows to scroll through
lists. Press the right and left navigation arrows to navigate
between different views of an application, to move the cursor
during text input, or to turn an option on or off.
OK
Press the OK button for a shortcut to an action. For example,
when you select a call log entry, pressing the OK button dials
the number.
Phone/Exit
Press the Phone/Exit button to view and manage your calls.
For example, if you are viewing a menu, pressing the
Phone/Exit button switches the phone display back to the
call view.
Avaya Menu
Press the A button to access the Avaya menu. The Avaya
menu provides options that allow you to customize phone
settings, configure call logging, select the display language,
view network information, and log out.
Contacts
Press the Contacts button to view the entries in your contact
list.
Call Log
Press the Call Log button to view a list of your outgoing,
incoming, and missed calls. The icon on the Call Log button
is illuminated when you have missed calls.
Redial
Press the Redial button to either dial the last number you
dialed or display the redial list from which you can select a
number to redial. See Setting redial options on page 46
for more information.
Hold
Press the Hold button to put the active call on hold.
Conference
Press the Conference button to add another party to an
existing call.
Transfer
Press the Transfer button to transfer a call to another
number.
Drop
Press the Drop button to drop the active call. While on a
conference call, press the Drop button to drop the last
person added to the conference call.See Dropping the last
person added from a conference call on page 20 or
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
7
Introduction to the 1608/1608-I IP Telephone
Name
Description
Dropping a person from a conference call on page 21 for
more information.
Volume
Press + or - on the Volume button while active on the
handset, headset, or speaker to adjust the volume. To adjust
the volume of the ringer, press + or - on the Volume button
while the handset and speaker are inactive.
Headset
Press the Headset button to use the headset if it is
connected. Only HIS headset cords are compatible with
your phone.
Mute
Press the Mute button to mute a call in progress. To take a
call off mute, press Mute again.
Speaker
Press the Speaker button to use the speakerphone. To take
a call off speakerphone, lift the handset or press the
Headset button.
Feature Buttons
and Call/Line
Appearance
Buttons
There are 8 buttons that can be programmed as either call/
line appearance buttons or feature buttons. Press a call/
line appearance button to make or answer a call or resume a
call on hold. Press a labeled feature button to enable or
disable that feature. The feature buttons provide access to
the Avaya call management system features that have been
administered for your extension. The green LED next to
each feature button indicates if the feature is currently on or
off. If the light is on, the feature is on. The feature buttons
provide the same features that are available in the features
menu. For more information about the features menu, see
Features menu on page 41. For more information about
the feature buttons, see Advanced telephone features on
page 37.
LEDs
Each call/line appearance button and feature button has two LEDs, one green and one red, to
indicate the status of the call/line appearance or feature. The status is identified by whether
the LED is on, off, or blinking as described in the following tables.
Table 1: Call/Line Appearance Button LEDs
LED
8
Description
Steady green
Call/line appearance is active.
Slow blinking green
Call/line appearance is ringing.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Icons in the telephone display
LED
Description
Fast blinking green
Call/line appearance is on hold.
Very fast blinking
green
Conference or Transfer is pending.
Steady red
Call/line appearance is selected and will be used when
you go off-hook. It remains steady red while you use the
call/line appearance.
Off
Call/line appearance is available.
Table 2: Feature Button LEDs
LED
Description
Steady green
Feature is active.
Blinking green
Feature is pending (request is being processed and not
immediately available).
Blinking red
Feature is shown on the phone display.
Off
Feature is not active.
Note:
Depending on your call processing system, the feature button LEDs for some features may
operate differently.
Icons in the telephone display
Icons are provided in the phone display to indicate the state of a call and navigation choices.
The icons that appear in the phone display are described in the following table.
Icon
Description
#X
Number of calls missed, where # represents the number.
Call forward, Send All Calls, or EC500 is active. (These
features are available if they have been administered for your
telephone.)
Incoming call is ringing.
Call is active.
Call is on hold.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
9
Introduction to the 1608/1608-I IP Telephone
Icon
Description
Call is on soft hold (when using Conference or Transfer
feature).
Conference is active.
Conference is on hold.
Scroll left for other options.
Scroll right for other options.
Scroll up or down for other options.
Scrolling and navigation
To navigate through the options and features on your telephone display, use the navigation
arrows to scroll and the OK button to select lines or options.
A navigation icon appears in the phone display to indicate that you can scroll to more options or
information. Use the right and left navigation arrows to go to other screens or to move the
cursor right or left when entering text. When you scroll to a line on the display, that line is
selected.
The softkey labels will change according to the options available for the selected line. The OK
button is a shortcut for the default action. For example, when you select an entry in your
contacts list, pressing the OK button places a call to that person.
Paper labels
Next to each call/line appearance button and feature button is a paper label. The label identifies
the call/line appearance number or the feature that has been programmed on the button by
your system administrator. You can remove the labels if you want to change a label or write
on a blank one. Printed labels are also available for your telephone. See your system
administrator for more information.
10
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 2: Logging in to and out of your
telephone
Logging in and out maintains your contacts and personal options if you share a telephone with
other users, or if you want to use the same extension from another phone. Logging out also
prevents unauthorized use of your telephone during an absence.
Note:
Call log information is lost after you log out.
Logging in to your telephone
Log in from the initial screen that prompts you for your extension.
1. Enter your extension.
2. Press the OK button, the OK softkey, or the # button.
3. Enter your password.
4. Press the OK button, the OK softkey, or the # button.
Logging out of your telephone
1. Press the A button.
2. Scroll down to select Log Out.
Note:
Log Out is not available if you are on a call.
3. Press the OK button or the Select softkey.
4. Press the Select softkey again to confirm.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
11
Logging in to and out of your telephone
12
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 3: Making calls
Use the procedures in this chapter to make calls from your telephone.
Making a call
If you are not on a call, simply dial the number you want to call.
1. Lift the handset, press the Speaker button, press the Headset button, or press an
available call/line appearance button.
2. Dial the number you want to call.
Clearing a number
Press Clear to erase all dialed digits and enter a new number.
Redialing a number
1. From the Phone screen, press the Redial button.
The last number will be redialed or you will see a list of the most recent numbers
that you have dialed, from which you can select one to redial.
2. Press the OK button or the Call softkey.
See Setting redial options on page 46 for information on redial settings.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
13
Making calls
Calling a person from the contacts list
1. Press the Contacts button.
2. Scroll up or down to select the person or number you want to call.
3. Press the OK button or the Call softkey.
Calling a person from the call log
1. Press the Call Log button.
2. Scroll to the left or right to view a separate list of all, missed, answered, or outgoing
calls.
3. Scroll up or down to select the person or number you want to call.
4. Press the Call softkey or the OK button.
14
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 4: Handling calls
Use the procedures in this chapter to handle calls from your telephone. This includes
procedures such as answering a call, muting a call, and transferring a call.
Answering a call
When you receive an incoming call, the green LED associated with the call will flash. The
incoming call is usually selected automatically. However, if you are already on a call or if you
receive more than one incoming call at a time, you may need to select the call you want to
answer manually.
1. If you are not on another call, do one of the following:
• Lift the handset.
• Press the call/line appearance button whose green LED flashes for the
incoming call.
• Press the Answer softkey if one appears.
• Press the Speaker button to answer using the speakerphone.
• Press the Headset button to answer using the headset.
• If you are using a wireless headset, press the ON button.
2. If you are on another call, do one of the following:
• Press the call/line appearance button whose green LED flashes for the
incoming call.
• Press the Answer softkey if one appears.
Note:
If the Auto Hold (Communication Manager) feature is enabled by your system
administrator, you can answer another call without first putting an active call on
hold. If Auto Hold is not enabled, you must put your active call on hold before
answering the incoming call; otherwise, you will drop the active call when you
answer the other one.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
15
Handling calls
Sending an incoming call directly to voice mail
Press the To Vmail softkey to send an incoming call directly to voice mail without
answering.
To do this, your voice mail must be administered as the first entry in your coverage
path. See your system administrator for more information.
Ignoring an incoming call
Press the Ignore softkey to stop the ringer for an incoming call.
Muting a call
If a call is on mute and you switch between the handset, headset, or speakerphone, the mute
will be turned off. When the Mute button light is on, the call is muted.
1. Press the Mute button during a call so that the other person cannot hear you.
2. Press the Mute button again to unmute the call.
Putting a call on hold
1. Press the Hold button to put your active call on hold.
16
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Transferring a call
The fast blinking green LED next to the call/line appearance button indicates the
call is on hold. If the active call is on a line appearance on an Avaya Distributed
Office system, the red LED will also be on.
2. To resume the call when there is more than one call on hold, do one of the following:
• Press the call/line appearance button.
• Scroll to the call and press the Resume softkey or the OK button.
3. To resume the calI when there is only one call on hold, do one of the following:
• Press the Hold button.
• Press the call/line appearance button.
• Press the Resume softkey.
• Press the OK button.
Transferring a call
1. If the call you want to transfer is not your active call, press the call/line appearance
button for the call you want to transfer.
2. Press the Transfer button.
The very fast blinking green LED next to the call/line appearance button indicates
the call is being transferred. If the active call is on a line appearance on an Avaya
Distributed Office system, the red LED will also be on.
3. Dial the telephone number, call the person from the contacts list, or call the person
from the call log.
Note:
To transfer the call to a call that is on hold, press the call/line appearance button for
the call that is on hold.
4. Press the Transfer button or the Complete softkey to transfer the call.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
17
Handling calls
18
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 5: Conference calls
You can use conference calls to speak with up to five people in different locations on the same
call. Additional conferencing options may be available through Expanded Meet-Me
Conferencing. Contact your system administrator for more information about this feature.
Making a conference call
1. While active on a call, press the Conference button.
The very fast blinking green LED next to the call/line appearance button indicates
the call is being conferenced. If the active call is on a line appearance on an Avaya
Distributed Office system, the red LED will also be on.
2. Do one of the following:
• Dial the telephone number.
• Call the person from the contacts list.
• Call the person from the call log.
3. Press the Conference button or the Join softkey to add the person to the existing
call.
Adding a person on hold to a conference call
1. From the Phone screen, select your active conference call.
2. Press the Conference button.
The active conference call is put on soft hold.
3. Do one of the following:
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
19
Conference calls
• Press the call/line appearance button for the call on hold. Be sure not to
choose the call/line appearance button for the call that is on soft hold.
• Scroll to the call on hold, and press the Resume softkey.
4. Press the Join softkey or the Conference button to add the person to the
conference call.
Putting a conference call on hold
When you put a conference call on hold, the other parties can still talk to each other.
1. Press the Hold button during a conference call.
The blinking green LED next to the call/line appearance button indicates the
conference is on hold.
2. Press the Resume softkey or the Hold button to resume the conference call.
Viewing conference details
1. From the Phone screen, press the Details softkey (if available) during a conference
call.
2. Scroll to view the participants on the call.
3. To exit conference details, press the Exit softkey.
Dropping the last person added from a conference call
While active on a conference call, press the Drop button.
20
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Dropping a person from a conference call
Dropping a person from a conference call
1. From the Phone screen, select the Details softkey (if available) during a conference
call.
2. Scroll to the person you want to drop.
3. Press the Drop button.
Silencing a person on a conference call
Only people calling from external numbers can be silenced on a conference call.
1. From the Phone screen, select the Details softkey (if available) during a conference
call.
2. Scroll to the person you want to silence.
3. Press the Silence softkey.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
21
Conference calls
22
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 6: Getting your messages
Use the Message button to connect to your voice mail system. When you have messages
waiting, the red light on the upper right-hand corner of your telephone is illuminated. Your
messages are an administered function. Contact your system administrator with any questions.
Logging into your voice mail
1. To log in to your voice mail, press the Message button.
2. Follow the voice prompts from your voice mail system.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
23
Getting your messages
24
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 7: Bridged call appearances
Your phone may show one or more bridged call appearances on the display screen in addition
to your own call appearances. A bridged call appearance typically belongs to someone else,
but bridging allows you to see if that call appearance is in use, answer calls on that appearance,
or join a call in progress on that call appearance from your telephone. You can also make
outgoing calls on a bridged call appearance when it is not in use.
Answering a call on a bridged call appearance
1. Press the call/line appearance button associated with the bridged call appearance.
The ringing bridged call appearance may be selected automatically if there are no
other active calls. If you are on another call when a call comes in to a bridged call
appearance, you may have to select the ringing bridged call appearance button (just
like for an incoming call to a primary line).
2. Press the Answer softkey.
Answering a call on a bridged call appearance is basically the same as a call on a
primary line. If the ringing bridged call appearance is selected, you can answer by
picking up the handset, by pressing the Speaker or Headset button, or pressing
the Answer softkey.
Joining a call on a bridged call appearance
1. Scroll to the call in progress that you want to join.
2. Press the call/line appearance button for the bridged call appearance, or press the
Bridge softkey.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
25
Bridged call appearances
Making an outgoing call on a bridged call appearance
When you make a call on a bridged call appearance, you are using another person’s call
appearance. The caller ID may show the call as coming from you or coming from the person
whose call appearance you are using. If you have any questions about how the name or
extension displays to the person you are calling, contact your system administrator.
1. Press the call/line appearance button associated with the bridged call appearance.
2. Dial the telephone number, or call the person from the contacts list, or call the person
from the call log.
26
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 8: Shared line appearances
If your call processing system is an Avaya Distributed Office system and depending on how
it is configured, your phone may show shared line appearances on the display screen in
addition to your own lines. A shared line appearance is a line that is shared among multiple
users. You can answer a call, join a call in progress, and make an outgoing call on a shared
line appearance. The procedures to answer, join, and make a call on a shared line appearance
are similar as those for a bridged appearance. But instead of using another person's line, you
are using a shared line.
Answering a call on a shared line appearance
1. Press the call/line appearance button associated with the shared line appearance.
The ringing shared line appearance may be selected automatically if there are no
other active calls. If you are on another call when a call comes in to a shared line
appearance, you may have to select the ringing shared line appearance button (just
like for an incoming call to a primary line).
2. Press the Answer softkey.
Answering a call on a shared line appearance is basically the same as a call on a
primary line. If the ringing shared line appearance is selected, you can answer by
picking up the handset, by pressing the Speaker or Headset button, or pressing
the Answer softkey.
Joining a call on a shared line appearance
1. Scroll to the call in progress that you want to join.
2. Press the call/line appearance button for the shared line appearance, or press the
Join softkey.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
27
Shared line appearances
Making an outgoing call on a shared line appearance
If you have any questions about how the name or extension displays to the person you are
calling when you make a call on a shared line appearance, contact your system administrator.
You can make only outside calls on shared line appearances.
1. Press the call/line button associated with the shared line appearance.
2. Dial the telephone number, or call the person from the contacts list, or call the person
from the call log.
28
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 9: Contacts
You can save up to 100 names and telephone numbers. For additional information, see Calling
a person from the contacts list on page 14.
Viewing contacts details
1. Press the Contacts button.
2. Scroll to the contact you want to view.
Names are listed alphabetically by last name. To return to the top of the list, press
the Contacts button again.
3. Press the Details softkey to see the contact number.
4. Scroll down to see the contact name.
Adding a new contact
1. Press the Contacts button.
Note:
If this is the first contact you are adding, skip step 2.
2. Press the More softkey.
If the More softkey is not displayed and this is not your first contact, press the
Contacts button again.
3. Press the New softkey.
4. Enter the name using the dialpad. To enter characters using the dialpad:
a. Press the number key that corresponds to the letter or number you want to enter
until the letter or number is displayed.
b. Pause before entering the next character if the characters are on the same key.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
29
Contacts
c. To enter a space, press 0.
d. Enter remaining letters or numbers.
e. Press Bksp to delete the last character.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle of
the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor.
5. Press the OK button or the OK softkey.
6. Enter the telephone number as you would if you were dialing it directly.
7. Press the Save softkey or the OK button.
Editing a contact
1. Press the Contacts button.
2. Scroll to the contact you want to edit.
3. Press the Details softkey.
4. Press the Edit softkey.
5. Scroll up or down to choose the field you want to edit.
6. Use the dialpad and softkeys to make changes to the contact information.
7. Press the Save softkey or the OK button to save your changes.
Deleting a contact
1. Press the Contacts button.
2. Scroll to the contact you want to delete.
3. Press More > Delete .
4. Press the Delete softkey again to confirm.
30
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Deleting a contact
Note:
If you press the Cancel softkey prior to pressing the Delete softkey, your contact
information will not be removed.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
31
Contacts
32
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 10: Call log
You can use the call log to view a list of your recent calls or view separate lists of your outgoing,
answered, or missed calls. See Turning call logging on or off on page 35 for information about
logging bridged call appearances, line call appearances, and line calls that are answered by
others.
Viewing the call log
1. Press the Call Log button.
You can go to the top of the list by pressing the Call Log button again.
2. Scroll to the right or left to view separate lists of all, answered, outgoing, or missed
calls.
Viewing call log details
1. Press the Call Log button.
2. Scroll to the number you want to view.
3. Press the Details softkey to view the name, number, and call duration.
4. Scroll down to view the date and time of the call.
5. Press the Back softkey to return to the list view.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
33
Call log
Adding an entry from the call log to your contacts list
1. Press the Call Log button.
2. Scroll to the number you want to add to your contacts list.
3. Press the Details softkey.
4. Press the +Contact softkey.
If your contacts list is full, the +Contact softkey is not displayed.
5. To edit the name or number, scroll up or down and edit as appropriate.
6. Press the Save softkey or the OK button.
Removing an entry from the call log
1. Press the Call Log button.
2. Select the number you want to delete.
3. Press More > Delete .
4. Press the Delete softkey again to confirm.
Clearing all entries from the call log
Clearing all entries from a call log deletes all of the entries for the specific list you are viewing.
For example, if you are viewing the Outgoing calls list, only outgoing calls are deleted from the
call log. However, if you are viewing the All calls list, pressing the DelAll softkey deletes all
calls from the call log.
1. Press the Call Log button.
2. Select the list you want to delete.
34
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Turning call logging on or off
3. Press More > DelAll to delete all of the entries in the list you are viewing.
4. Press the DelAll softkey again to confirm.
Turning call logging on or off
You can turn call logging on or off. In addition to logging your primary calls, if you have bridged
call appearances or line call appearances, you can choose whether or not to include those
calls in your call log.
You can also choose whether or not you want to include line call appearances that are
answered by others in your call log. For example, if Log Line Calls is turned on, but you do not
want line calls that are answered by others to appear as missed calls in your call log, turn on
Log Answered by Others. Configured in this way, the line calls that are answered by others will
appear as answered calls in your call log. To include calls only on your primary lines in your
call log, turn off Log Bridged Calls and Log Line Calls.
1. Press the A button.
2. Select Applications.
3. Press the Select softkey.
4. Select Call Log.
5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn call logging on or off.
The call log must be turned on in order to log line calls or bridged calls. If the call
log is turned off, no calls are logged even if Log Line Calls or Log Bridged Calls is
turned on.
6. Press the Back softkey.
7. Select Log Bridged Calls, Log Line Calls, or Log Answered by Others.
Log Line Calls must be turned on in order for Log Answered by Others to operate.
8. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn call logging on or off.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
35
Call log
36
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 11: Advanced telephone features
Avaya call management systems provide many advanced telephone features such as
Directory, Call Forwarding, and Abbreviated Dial buttons. These features are administered on
the feature buttons on your telephone. The features are identified on the associated paper
labels. The features that have been administered for your telephone are also listed in the
Features Menu that you can access from the Phone display. For more information about the
Features Menu, see Features menu on page 41.
The features that are available to you depend on what your administrator has assigned to your
telephone. A few of the most commonly administered features are explained below. For more
information about all the features that are available for your extension, contact your system
administrator.
Forwarding a call
The Call Forward feature allows you to forward your incoming calls to another number. You
must enter the telephone number where the calls will be forwarded each time you use this
feature. You can forward calls only to internal numbers.
If you use a Feature Access Code to enable call forwarding, the forwarding icon does not
appear in the phone display.
1. Press the CFrwd feature button.
You hear a dial tone prompting you to dial the forwarding number.
2. Dial the number you want to forward your calls to.
After you dial the number, you hear a confirmation tone. The forwarding icon
appears on the top line of your phone display, and the green LED next to the feature
button turns on.
3. To turn call forwarding off, press the CFrwd feature button.
The forwarding icon no longer appears on the top line of your phone display, and
the green LED next to the feature button turns off.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
37
Advanced telephone features
Send all calls
The Send All Calls (SAC) feature allows you to send all of your incoming calls directly to a
predefined coverage number, typically your voice mail. Incoming calls ring once at your
extension and then go directly to a number which is set by your system administrator.
If you use a Feature Access Code to enable Send All Calls, the forwarding icon does not appear
in the phone display.
1. Press the SAC feature button to send all calls to coverage.
The forwarding icon appears on the top line of your phone display, and the green
LED next to the feature button turns on.
2. To turn the feature off, press the SAC feature button.
The forwarding icon no longer appears on the top line of your phone display, and
the green LED next to the feature button turns off.
Calling a person from the corporate directory
The Directory feature allows you to dial other users in your system by name.
1. Press the Directory feature button.
2. Use the dialpad keys to start spelling the last name of the person you want to call.
Press each dialpad key one time for each corresponding letter. For example, for
“Hill”, press 4,4,5,5.
3. Press the Next feature button to view the next name alphabetically in the directory, if
necessary.
4. Press the Make Call feature button when you see the name you want.
5. To exit the Directory, press the Phone/Exit button or the Exit softkey.
Activating Extension to Cellular (EC500)
The Extension to Cellular (EC500) feature allows you to have incoming calls ring on your office
telephone and your cell phone at the same time. This allows you to answer office calls while
38
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Activating Extension to Cellular (EC500)
you are away from your desk. The cell phone number is programmed by your system
administrator.
If you use a Feature Access Code to enable EC500, the forwarding icon does not appear in
the phone display.
1. Press the EC500 feature button to turn the feature on.
The green LED next to the feature button turns on.
2. To turn the feature off, press the EC500 feature button.
The green LED next to the feature button turns off.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
39
Advanced telephone features
40
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 12: Features menu
The Features menu provides access to the same advanced telephone features, such as
Directory and Call Forwarding, that are programmed on your feature buttons. In addition to
providing another way of accessing the features, you can use the Features Menu to confirm
the features programmed on the feature buttons if, for example, a feature button label is
missing or labeled incorrectly.
See Advanced telephone features on page 37 for more information about the features that can
be administered for your phone.
Accessing the Features menu
1. From the Phone screen, scroll right to access the first feature on the Features Menu.
To return to the main Phone screen, press the Phone/Exit button or the Exit softkey.
2. Scroll down to see the features that have been administered for your extension.
The green LED next to the Feature button indicates if the feature is currently on or
off. If the light is on, the feature is on. The red LED next to the Feature button blinks
while the feature label is displayed on the screen.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
41
Features menu
42
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Chapter 13: Avaya Menu
You can use the Avaya Menu to adjust and customize phone settings, configure call logging,
select the display language, view network settings, and log out.
The Avaya Menu has six sub-menus:
Screen/Sound
Lets you adjust the display brightness and contrast, select your ringing
pattern, turn button click sounds on and off, and turn error tones on and off.
Call Settings
Lets you turn the call timer display, visual alerting, and show incoming calls
on or off; set the redial option; and set the audio path to speakerphone or
headset.
Applications
Lets you turn call logging on and off as well as turn logging of bridged calls,
line calls, and line calls answered by others on and off.
Advanced
Options
Lets you select the display language; set automatic gain control on the
handset, headset, and speaker; or initiate a manual backup/restore if you
have a backup/restore file server. See your system administrator for more
information.
Network
Information
Shows a summary of network-related parameters for your phone, such as
IP parameters and Quality of Service.
Log Out
Lets you log out of your telephone to prevent unauthorized use during your
absence.
Note:
The sub-menus that appear depend on how your extension was administered. Some submenus may not be available.
Adjusting the brightness or contrast of the display
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Brightness or Contrast.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
43
Avaya Menu
5. Press the Select softkey or the OK button.
6. Scroll to the right or left to adjust the brightness or contrast.
Changing the ring pattern
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Personalized Ringing.
5. Press the Select softkey or the OK button.
6. Scroll up or down to see a list of the available ring patterns.
7. Select a ring pattern to listen to it.
8. Press the Play softkey to hear it again.
9. Press the Save softkey to make it your ring pattern.
Turning button click sounds on and off
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Button Clicks.
5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn sounds on or off.
44
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Turning error tones on or off
Turning error tones on or off
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Error Tones.
5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn error tones on or off.
Turning the call timer on or off
You can set your call settings to automatically display the duration of calls. You can turn the
call timer display on or off.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Select Call Timers.
5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn the call timer display on or off.
6. Press the Phone/Exit button to return to the phone screen.
Turning visual alerting on or off
When the Visual Alerting option is turned on, incoming calls cause the LED in the top right
corner of the phone to flash. You can turn Visual Alerting on or off.
1. Press the A button.
2. Scroll to Call Settings.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
45
Avaya Menu
3. Press the Select softkey or the OK button.
4. Select Visual Alerting.
5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn visual alerting on or off.
Setting redial options
You can set Redial to dial the last number you dialed or to display a list of the last numbers
you dialed.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Select Redial.
5. Press the Change softkey or the OK button to toggle between One and List.
Setting the audio path
You can set the audio path of your phone so that when you initiate a call, the audio path
automatically goes to either the speakerphone or your headset.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Select Audio Path.
5. Press the Change softkey or the OK button to toggle between Headset and
Speaker.
46
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Turning show incoming call on or off
Turning show incoming call on or off
You can set your call settings to automatically display incoming calls. You can turn the Show
Incoming Call option on or off.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Select Show Incoming Call.
5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn Show Incoming Call on or off.
Setting automatic gain control
Automatic gain control helps to maintain a constant audio level by automatically increasing or
decreasing the gain depending upon the signal level. For high level signals, the gain is reduced
and for low level signals, the gain is increased.
1. Press the A button.
2. Press # to scroll to Advanced.
3. Press * to select Advanced.
4. Scroll to Advanced Options.
5. Press the Select softkey or the OK button.
6. Select Automatic Gain Control.
7. Press the Select softkey or the OK button.
8. Select Handset, Headset, or Speaker.
9. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to
turn automatic gain control on or off.
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
47
Avaya Menu
Changing the language
1. Press the A button.
2. Press # to scroll to Advanced.
3. Press * to select Advanced.
4. Scroll to Advanced Options.
5. Press the Select softkey or the OK button.
6. Select Language.
7. Press the Select softkey or the OK button.
8. Scroll up or down to select a display language.
Note:
Other languages may be available. Contact your system administrator.
9. Press the Select softkey or the OK button to change to the selected language.
10. Press the OK button to confirm selection.
Viewing network information
1. Press the A button.
2. Scroll to Network Information.
3. Select Audio Parameters, IP Parameters, Quality of Service, Interfaces, or
Miscellaneous.
4. Press the View softkey or the OK button.
48
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Index
A
advanced options
setting automatic gain control ..............................47
Advanced Options
changing language ...............................................48
advanced telephone features
about ....................................................................37
applications
call logging ...........................................................35
contacts ................................................................29
audio paths
configuring ...........................................................46
automatic gain control
setting ..................................................................47
Avaya menu
button click sounds ..............................................44
Avaya Menu ..........................................................43–45
adjusting brightness or contrast ...........................43
changing ring pattern ...........................................44
error tones ............................................................45
B
bridged call appearance
about ....................................................................25
joining ...................................................................25
Bridged Calls
answering .............................................................25
button click sounds
configuring ...........................................................44
configuring show incoming call ............................47
redial options ........................................................46
Call Timers
configuring ...........................................................45
call/line appearance button LEDs
about ......................................................................8
calling a person
from the call log ....................................................14
from the contacts list ............................................14
from the corporate directory .................................38
Clearing a number ......................................................13
conference calls
about ....................................................................19
adding a person on hold ......................................19
dropping the last person ......................................20
making .................................................................19
putting a call on hold ............................................20
silencing a person ................................................21
viewing tetails .......................................................20
Conference Calls
dropping a person ................................................21
contacts
about ....................................................................29
adding a new person ............................................29
adding from the call log ........................................34
calling a person ....................................................14
deleting ................................................................30
editing ..................................................................30
selecting ...............................................................29
coverage .....................................................................38
C
D
call log
about ....................................................................33
calling a person ....................................................14
clearing entries .....................................................34
log bridged calls ...................................................35
log calls answered by others ................................35
log line calls .........................................................35
removing an entry ................................................34
turning off .............................................................35
viewing .................................................................33
viewing details ......................................................33
call settings
configuring audio path ..........................................46
configuring visual alerts .......................................45
Call Settings
configuring call timers ..........................................45
directory
calling a person ....................................................38
Display
adjusting brightness .............................................43
adjusting contrast .................................................43
Avaya 1608/1608-I IP Deskphone User Guide
E
error tones
turning off .............................................................45
F
feature button LEDs
about ......................................................................8
February 2010
49
Index
Features
accessing .............................................................41
Features menu
about ....................................................................41
forwarding
a call .....................................................................37
logging out of telephone .............................................11
logging out of your telephone .....................................11
G
N
getting your messages ...............................................23
navigation arrows
right and left .........................................................10
up and down ........................................................10
H
M
making calls ................................................................13
muting calls ................................................................16
O
handling calls ..............................................................15
hold
conference calls ...................................................20
I
icons in telephone display
about ......................................................................9
Incoming call
ignoring ................................................................16
incoming calls
answering .............................................................15
directing to multiple telephones ...........................38
forwarding ............................................................37
sending directly to voice mail ...............................16
sending to coverage .............................................38
transferring ...........................................................17
outgoing calls
making a call ........................................................13
making a call on a bridged call appearance .........26
making a call on a shared line appearance .........28
redialing a number ...............................................13
P
paper labels ................................................................10
putting a call on hold ..................................................16
R
redial ...........................................................................13
redial options
setting ..................................................................46
Ring Pattern
changing ..............................................................44
S
L
Language
changing ..............................................................48
LEDs
about ......................................................................8
legal notices .................................................................2
logging in to your telephone .......................................11
SAC ............................................................................38
scrolling and navigation
about ....................................................................10
shared line appearance
about ....................................................................27
answering .............................................................27
joining ...................................................................27
show incoming calls
turning on or off ....................................................47
T
telephone display icons ................................................9
Transfer ......................................................................17
V
viewing network information .......................................48
visual alerts
configuring ...........................................................45
voice mail
logging in ..............................................................23
50
Avaya 1608/1608-I IP Deskphone User Guide
February 2010
Download PDF

advertising