User guide | Avaya 4600 Telephone User Manual

IP Office
5402/2402 Phone User Guide
Issue 2d (10th October 2005)
Table of Contents
The Telephone............................................................................................................................ 3
Overview..................................................................................................................................................... 3
Call Appearance Keys ................................................................................................................................ 5
Call Appearance Key Icons.................................................................................................................... 5
System Features.................................................................................................................................... 6
Basic Call Handling Features.................................................................................................... 7
Answer a Call ............................................................................................................................................. 7
Make a Call................................................................................................................................................. 7
Clearing a Call ............................................................................................................................................ 7
Redial ......................................................................................................................................................... 8
Headset Working ........................................................................................................................................ 8
Speaker ...................................................................................................................................................... 8
Conference ................................................................................................................................................. 9
Mute............................................................................................................................................................ 9
Hold .......................................................................................................................................................... 10
Transfer .................................................................................................................................................... 11
Message ................................................................................................................................................... 11
System Features ...................................................................................................................... 12
System Features Introduction................................................................................................................... 12
Answering Calls........................................................................................................................................ 12
Call Forwarding ........................................................................................................................................ 12
Default Feature Codes ............................................................................................................................. 13
Diverting Calls .......................................................................................................................................... 14
Do Not Disturb .......................................................................................................................................... 14
Making Calls ............................................................................................................................................. 14
Voicemail .................................................................................................................................................. 15
Index.......................................................................................................................................... 17
5402/2402 Phone User Guide
IP Office
Page ii
Issue 2d (10th October 2005)
The Telephone
Overview
This guide covers the use of the Avaya 5402 and 2402 phones on Avaya IP Office. Both phones are
similar, however the 5402 is only supported on the IP Office whereas the 2402 is supported on a range
of Avaya telephone systems.
•
The 2402 display is not fully supported on the IP Office. For call appearance icons, caller display
etc, the 5402 should be used.
5402/2402 Phone User Guide
IP Office
Page 3
Issue 2d (10th October 2005)
5402user
1. Display, Call Appearance and Feature Keys: Two Call Appearance Keys allow the user to
handle multiple calls and the display shows call information.
2. Message lamp: Lit when the user has voicemail messages. Can also be set to flash when the
phone is ringing.
3.
Messages: Access the user's mailbox.
4. Call Handling Buttons:
•
Hold: Place call on hold.
•
Transfer: Transfer call.
•
Conference: Conference held calls.
•
Drop: Drop call.
•
Redial: Redial last number dialed.
5. Dial pad: Standard 12-button pad for dialing telephone numbers.
6.
Volume Controls: Adjusts the speaker, handset, headset, or ringer volume depending on
which is currently in use.
7. Handset Socket: The socket for the handset cable can be found on the side of the telephone.
The handset can be replaced by a headset.
8.
Mute: Turns the microphone on/off in the headset/handset only. When in use, the associated
light is on and the caller cannot hear you.
9.
Feature: The System Administrator can configure a number of special features which are then
accessed by pressing this key followed by any of the keys 0 to 9, * or #.
10.
Speaker: Puts the call on the phone's speaker rather than the handset. The lamp next to the
button is lit when this option is in use. The speaker only provides a speech monitor function, you
can hear a call through the phone's speaker but you must lift the handset to speak.
5402/2402 Phone User Guide
IP Office
Page 4
Issue 2d (10th October 2005)
The Telephone
Call Appearance Keys
The main call handling screen contains two buttons set as 'Call Appearance' keys.
For details of Bridged, Line and Call Coverage Appearance Keys set-up and their operation, refer the IP
Office Key and Lamp Operation manual.
CAUTIONS:
1. Having two Call Appearance keys is very useful. When holding a call you can answer/make
another call and then switch between calls or transfer or conference. If you are set to receive call
waiting indication, the waiting call is shown against the next call appearance key.
2. Although your System Administrator can replace the Call Appearance Keys
/
with other
functions, this would severely restrict the use of features such as conference and transfer. It is for
these reasons that it is strongly recommended that all Call Appearance keys remain at their
default settings.
Call Appearance Key Icons
The icons displayed against the Call Appearance Keys allow you to determine the status (for example,
on Hold) of each call. Icons also indicate whether a feature has been activated for a particular button.
Incoming Call:
•
A
/
symbol next to a call appearance key indicates an incoming call. Pressing the adjacent
key answers the call and puts any other current call on hold.
Connected:
•
A symbol next to a call appearance key indicates that it is the currently connected call. The
caller's telephone number (if available) is also shown.
On Hold:
•
Pressing
Hold or the adjacent
key puts the call on hold, a symbol next to a call
appearance key indicate a call on hold and an H is also shown on the display.
•
Pressing the adjacent
5402/2402 Phone User Guide
IP Office
key takes the call off hold.
Page 5
Issue 2d (10th October 2005)
5402user
System Features
System Features can be set against dial pad digits by your System Administrator and are accessed by
use of the Feature key.
For Key and Lamp mode of operation these System Features must not be set against the Call
Appearance keys. See the CAUTIONS above.
Refer to Overview of the Feature Key for details of the System Feature that can only be allocated to
you by your System Administrator and to System Features Introduction for details of System Features
that you can always access yourself by dialing short codes, e.g. *17 to listen to your VoiceMail
messages.
5402/2402 Phone User Guide
IP Office
Page 6
Issue 2d (10th October 2005)
Basic Call Handling Features
Answer a Call
When a call arrives at your phone, you hear a ringing tone and a flashing bell icon ( ) appears on the
associated call appearance display. The following describes how to use your handset to answer calls. To
answer calls using a headset, see Headset Working.
To answer an incoming call:
Do one of the following:
If you are not active on another call, answer the call by lifting your handset.
You can also press Speaker to listen to the incoming call, but you must use the
handset/headset to speak to the caller. The phone does not have a built in microphone.
or
If you are active on a call already, place the active call on Hold and then answer the incoming call
(see Hold).
Make a Call
When making a call, the built-in speaker in your phone allows you to monitor the progress of calls
without lifting your handset.
To manually make a call:
Dial the number (remember to include the required access code (for example, 9) for an outside
line) and listen to the progress of the call.
Adjust speakerphone volume as necessary.
To change the volume use the
are eight volume levels.)
and
buttons. The display shows the volume level. (There
If the call is not answered, you can clear the call by pressing
Speaker or
Drop.
or
When the call is answered, you must pick up the handset to speak to the called party.
To automatically make a call you can:
Automatically dial the last number that you dialed by pressing
Redial
or
Automatically dial a frequently used number by pressing Feature and the relevant dial pad digit.
These numbers are allocated to your dial pad by your System Administrator.
See Overview of the Feature Key.
Clearing a Call
To clear an established call either:
Replace the handset
or
Drop. You will hear dial tone, unless you are in ‘call center mode’ of working when you will
Press
then hear silence.
5402/2402 Phone User Guide
IP Office
Page 7
Issue 2d (10th October 2005)
5402user
Redial
The Redial feature automatically redials the last extension or outside number (up to 24 digits) you dialed.
To redial the last number that you dialed
Redial.
Press
Headset Working
If a headset is to be used on your phone, it must replace the handset. E.g. unplug the handset (from the
socket on the side of the phone) and replace with the headset cable. Discard the handset.
To answer an incoming call:
Press the call appearance key
next to the flashing bell icon ( ) and speak.
To clear a headset call:
Press
Drop.
To manually make a call:
Dial the number (remember to include the required access code (for example, 9) for an outside line)
and listen to the progress of the call.
To automatically make a call:
Press
Redial and a call appearance key
dialed.
to have the phone dial the last number that you
or
Automatically dial a frequently used number by pressing Feature and the relevant dial pad digit.
These numbers are allocated to your dial pad by your System Administrator.
See Overview of the Feature Keys
Speaker
The Speaker facility allows you to monitor incoming calls only. You must use the handset to speak to the
caller. You can also use Speaker to terminate an existing call.
Speaker button switches the speaker on/off. The light associated with this button turns on when
The
the speaker is active.
5402/2402 Phone User Guide
IP Office
Page 8
Issue 2d (10th October 2005)
Basic Call Handling Features
Conference
The Conference feature allows you to conference other parties (including yourself) into a call.
Notes:
The number of parties allowed in a conference is controlled by your telephone system.
Two Call Appearance keys are required for the conference feature.
Pressing
Conference put all held calls into conference.
To add another party to a call:
Press
Conference. The existing call is put on hold.
Dial the number of the person you want to add to the call.
Wait for an answer.
If the called party does not answer or does not want to join the conference, press
You can return to the held call by pressing its call appearance button.
4. To add the person to the call, press
Drop.
again.
5. Repeat Steps 1 through 4 for additional conference connections.
To add a held call(s) to an active call:
Press
Conference.
All calls that are on Hold are added to the conference.
Mute
With a call in progress and using either the handset or the headset, you can stop the other party from
hearing you.
To switch off your handset/headset microphone:
Press
Mute. The lamp beside MUTE comes on.
To switch off, press
Mute again. The lamp beside MUTE goes off.
5402/2402 Phone User Guide
IP Office
Page 9
Issue 2d (10th October 2005)
5402user
Hold
If, with a call in progress, a second call arrives and is shown against a Call Appearance key, you can
then Hold the first call and answer the second call.
To put an existing call on hold:
Press Hold or the Call Appearance button with the
showing that the line is on hold.
symbol against it. The symbol changes to
Answer the second call by pressing the Call Appearance button with the
symbol changes to ; showing that the line is connected.
;
symbol against it. The
To return to the held call:
If you have a call in progress, then first put that call on hold as above.
To retrieve a held call, simply press the Call Appearance button with the
against it.
Notes:
After a pre-set time (defined by your System Administrator), you are reminded that you have a call on
hold by the hold icon changing for a few moments to and the phone ringing.
If the system feature AutoHold is on (consult your System Administrator) then you can hold an active
call ( ) by pressing the second call’s Call Appearance button ( ). If AutoHold is off, then pressing
the second call’s Call Appearance button ( ) will drop the first call.
To transfer a held call see Transfer.
5402/2402 Phone User Guide
IP Office
Page 10
Issue 2d (10th October 2005)
Basic Call Handling Features
Transfer
The Transfer feature allows you to transfer a call from your telephone to another extension or outside
number.
To transfer the current call to another extension:
1. With a call in progress, press
Transfer.
2. When you hear dial tone, dial the number to which the call is to be transferred.
3. Do one of the following:
•
To transfer the call without announcing it, either hang up or press
The transfer is complete.
•
To announce the call before transferring it, wait for the called party to answer.
If the called party is willing to accept the call, press
Transfer or hang up to complete
the transfer.
If the called party does not wish to accept the call, press
Drop.
To return to the original caller press it’s call appearance button.
•
If the line is busy or if there is no answer, press
Drop.
To return to the original caller press it’s call appearance button.
Transfer.
To transfer a new call to a held call using Conference:
1. With a call in progress and you wish to make an enquiry call or another call arrives, press
Hold. Make or answer the second call. The second call requires to be transferred to the first held
call.
2. To transfer the new call to the held call, press
complete.
Conference and then
Drop. The transfer is
Message
Your Message lamp turns on when a caller has left a message for you.
Press the
Message button to retrieve your messages and follow the audible prompts.
5402/2402 Phone User Guide
IP Office
Page 11
Issue 2d (10th October 2005)
System Features
System Features Introduction
As well as your phones specific features that only the System Administrator can allocate, you can access
a number of system features by dialing short codes.
These instructions are for the system's default configuration. They assume that you are using the default
feature codes. It also assumes that you have full access to all features and the public telephone network.
Answering Calls
Ringing at your own extension:
Simply pick up the handset. When in headset mode, press the button associated with the alerting call.
The default ringing cadences are:
Internal calls have a single ring cadence
External calls have a double ring cadence.
These can be changed by your System Administrator.
Ringing at another extension:
You can answer from your own phone by using Call Pick-Up; lift your handset and dial:
*30 to answer a call ringing anywhere.
*31 to answer a call within your group.
*32*201# to answer the call for a particular extension, in this example 201.
Note: If your phone rings for any longer than a specified period (15 seconds in default), any re-direction
feature that you have activated, such as voicemail or call forwarding, will come into effect.
Call Forwarding
Your calls can be forwarded to another extension or an external number either when you are away from
your desk (on no answer), when your extension is busy, and all calls (for example when you go on
holiday).
To switch forward direct station (i.e. not Hunt Group) calls on dial *01, to switch it off
dial *02.
To switch forward on busy on dial *03, to switch it off dial *04.
To switch forward on no answer on dial *05, to switch it off dial *06.
To set the number to which your calls are forwarded dial *07*201#, forwarding to 201 in this
example.
5402/2402 Phone User Guide
IP Office
Page 12
Issue 2d (10th October 2005)
System Features
Default Feature Codes
The following are the normal default feature codes available to all users. Your System Administrator may
add additional codes for other features and for speed dials.
The N where shown, should be replaced by the appropriate number. For example, with *07*N#, replace
N with the extension to which you want your calls forwarded when you have forwarding switched on.
*00
Cancel All Forwarding
*32*N#
Call Pick Up Extension
*01
Forward Unconditionally On
*33*N#
Call Queue
*02
Forward Unconditionally Off
*34
Hold Music
*03
Forward on Busy On
*35*N#
Extn Login
*04
Forward on Busy Off
*36*N#
Extn Logout
*05
Forward on No Answer On
*37*N#
Park Call
*06
Forward on No Answer Off
*38*N#
Ride Call
*07*N#
Forward to number
*39
Relay On
*08
Do Not Disturb On
*40
Relay Off
*09
Do Not Disturb Off
*41
Relay Pulse
*10*N#
Do Not Disturb Exception Add
*42
Relay On
*11*N#
Do Not Disturb Exception Delete
*43
Relay Off
*12*N#
Follow Me Here
*44
Relay Pulse
*13*N#
Follow Me Here Cancel
*45*N#
Call Steal
*14*N#
Follow Me To
*46
Call Steal
*15
Call Waiting On
*47
Conference Add
*16
Call Waiting Off
*48
Voicemail Ringback On
*17
Voicemail Collect
*49
Voicemail Ringback Off
*18
Voicemail On
*50
Forward Hunt Group Calls On
*19
Voicemail Off
*51
Forward Hunt Group Calls Off
*20*N#
Set Hunt Group Night Service
*52
Clear Call
*21*N#
Clear Hunt Group Night Service
*53*N#
Call Pickup Members
*29
Toggle Calls
*57*N#
Forward on busy number
*30
Call Pick Up Any
*70*N#
Dial Physical Extn by Number
*31
Call Pick Up Group
*71*N#
Dial Physical Extn by ID
5402/2402 Phone User Guide
IP Office
Page 13
Issue 2d (10th October 2005)
5402user
Diverting Calls
You can divert your calls to another extension. In the examples below N is the extension to which you
want your calls diverted. Note that, if you do not answer calls at the temporary extension, they are
forwarded to your own voicemail or call forwarding number.
At another extension:
*12*N# from the extension you are temporarily using.
*13*N# to re-direct the calls back to your own extension, before you return to it.
At your own extension:
*14*N# from your own extension.
*14*# to cancel either feature from your own extension.
Do Not Disturb
You may choose to receive no calls at all or only those from particular callers on your exceptions list:
To switch Do Not Disturb on (with or without exceptions) dial *08, to switch it off dial *09.
*10*N# to add a number to the exception list.
*11*N# to delete a number from the exception list.
Note: Your callers, other than your exceptions, either hear busy tone or are re-directed to your
voicemail.
Making Calls
Internal Calls:
If your System Administrator has allocated you the Ring Back When Free feature (see RBak+ - Ringback
When Free) under a dial pad digit, you can:
When you call an extension that does not answer or is busy, press the
callback on that extension.
RBak feature key to set a
When the extension you called becomes free, your phone will ring (a burst of three rings).
Lift the handset and the extension is called automatically.
External calls:
To make an external call, either dial the number (prefixed by the access code if required) or use a speed
dial code (contact your system manager for a list of your speed codes).
If you hear busy tone while dialing, then the call may be barred. Your system manager can bar certain
calls, such as those to premium rate numbers and international calls.
5402/2402 Phone User Guide
IP Office
Page 14
Issue 2d (10th October 2005)
System Features
Voicemail
Where your system has voicemail support and has been installed:
To switch voicemail on dial *18, to switch it off dial *19.
To retrieve your voicemail, use the code *17.
Your voicemail may be set up to deliver your messages by calling you whenever you hang up: this
feature is known as Voicemail Ringback.
To turn Voicemail Ringback on dial *48; to turn it off dial *49.
Dialing a number while listening to your messages invokes further facilities:
Once messages have been delivered, they are held on the system for 24 hours (this is fixed for
Voicemail Lite, but can be varied by your System Administrator if your IP Office is equipped with
VoicemailPro).
You can collect your voicemail from another extension by using the PIN your System Administrator has
set up for you. You can collect your messages if you are out of the office, by either dialing from a number
that has been registered for the purpose or by dialing your extension number and PIN when prompted. If
validation is successful, then dial 1 to retrieve your mail.
The System Administrator also specifies the reception number, to which the call is diverted if the caller
dials 0, and your email address if your voicemail and email are integrated.
5402/2402 Phone User Guide
IP Office
Page 15
Issue 2d (10th October 2005)
Index
0
07*N 13
1
10*N 13, 14
11*N 13, 14
12*N 13, 14
13*N 13, 14
14*N 13, 14
2
20*N 13
201
forwarding 12
21*N 13
3
32*N 13
33*N 13
35*N 13
36*N 13
37*N 13
38*N 13
4
45*N 13
5
53*N 13
57*N 13
7
70*N 13
71*N 13
A
Accesses
Speaker 3
Accesses 3
Adjust speakerphone
7
Answer
Call 7, 12
Answer 7, 12
Answer/make 5
AutoHold 10
Avaya 3
Avaya 5402 3
Avaya IP Office 3
B
Bridged 5
Bridged Appearance
5
Busy Off 13
Busy On 13
C
Call Appearance 5, 9
Call Appearance
button
pressing 10
Call Appearance
button 10
Call Appearance key
replace 5
Call Appearance key
3, 5, 10
Call Appearance Key
Icons 5
Call Coverage
Appearance 5
Call Coverage
Appearance Keys 5
Call Forwarding 12
Call Handling
Buttons 3
Call Pick Up Any 13
Call Pick Up
Extension 13
Call Pick Up Group
13
Call Pick-Up 12
Call Pickup Members
13
Call Queue 13
Call Steal 13
Call Waiting Off 13
Call Waiting On 13
Call’s Call
Appearance button
10
Calls
Answer 7
Answering 12
Clearing 7
Diverting 14
Incoming 5
Make 7
Making 14
Calls 5, 7, 12, 14
Cancel All
Forwarding 13
CAUTIONS
See 5
CAUTIONS 5
Clear Call 13
Clear Hunt Group
Night Service 13
Clearing
Call 7
Clearing 7
Conference
Pressing 9
Conference 9, 11
Conference Add 13
D
Default Feature
Codes 13
Dial Physical Extn 13
Display, Call
Appearance 3
Diverted
Calls 14
Diverted 14
Do Not Disturb 14
Drop 7, 9, 11
5402/2402 Phone User Guide
IP Office
E
Email 15
Extn Login 13
Extn Logout 13
F
Feature
Pressing 7, 8
Feature 7, 8
Feature Keys
use 5
Feature Keys 3, 5
Follow Me Here 13
Follow Me Here
Cancel 13
Follow Me To 13
Forward Hunt Group
Calls Off 13
Forward Hunt Group
Calls On 13
Forward
Unconditionally Off
13
Forward
Unconditionally On
13
Forwarding
201 12
Forwarding 12
H
Handset Socket 3
Handset/headset
use 7
Handset/headset 7,
9
Handsfree 3
Headset Working 8
Headset/handset 3
Hold
Pressing 5
Hold 5, 7, 9, 10, 11
Hold Music 13
Hunt Group 12
I
ID 13
Incoming
Call 5
Incoming 5
Internal Calls 14
IP Office 3, 15
IP Office Key
refer 5
IP Office Key 5
It’s 11
L
Lamp 5
Lamp Operation 5
LED 3
Line 5
Line Appearance 5
Lit 3
M
Make
Call 7, 14
Make 7, 14
Message 11
Message button
Press 11
Message button 11
Mode’ 7
Mute 9
N
No Answer Off 13
No Answer On 13
Not Disturb 14
Not Disturb
Exception Add 13
Not Disturb
Exception Delete 13
Not Disturb Off 13
Not Disturb On 13
Number 13
O
On/off 3, 8
Overview 3
P
Park Call 13
PIN 15
Press Conference 9
Press Drop 7, 8
Press Hold 10
Press Mute 9
Press Redial 8
Pressing
Call Appearance
button 10
Conference 9
Feature 7, 8
Hold 5
Message button
11
RBak 14
Redial 7
Speaker 7
Pressing 5, 7, 8, 9,
10, 11, 14
R
RBak
press 14
RBak 14
Redial
pressing 7
Redial 3, 7, 8
Redials 8
Refer
IP Office Key 5
Refer 5
Relay Off 13
Relay On 13
Page 17
Issue 2d (10th October 2005)
5402user
Relay Pulse 13
Repeat Steps 9
Replace
Call Appearance
Keys 5
Replace 5
Ride Call 13
Ring Back When
Free 14
S
See
CAUTIONS 5
See 5
Set Hunt Group
Night Service 13
Speaker
Accesses 3
Pressing 7
Speaker 3, 7, 8
Speaker button 8
Speakerphone 3
Standard 12-button 3
System
Administrator 3, 5, 7,
8, 10, 12, 13, 14, 15
System Features 5
System Features
Introduction 12
T
Toggle Calls 13
5402/2402 Phone User Guide
IP Office
Transfer 11
U
Use
Feature key 5
handset/headset
7
Use 5, 7
V
Voicemail Ringback
15
Voicemail Ringback
Off 13
Voicemail Ringback
On 13
VoicemailPro 15
Volume Controls 3
Voicemail 3, 5, 12,
14, 15
Voicemail Collect 13
Voicemail Lite 15
Voicemail Off 13
Voicemail On 13
Page 18
Issue 2d (10th October 2005)
5402user
Performance figures and data quoted in this document are typical, and must be specifically
confirmed in writing by Avaya before they become applicable to any particular order or contract.
The company reserves the right to make alterations or amendments to the detailed
specifications at its discretion. The publication of information in this document does not imply
freedom from patent or other protective rights of Avaya or others.
Intellectual property related to this product (including trademarks) and registered to Lucent
Technologies have been transferred or licensed to Avaya.
All trademarks identified by the ® or ™ are registered trademarks or trademarks, respectively,
of Avaya Inc. All other trademarks are the property of their respective owners.
This document contains proprietary information of Avaya and is not to be disclosed or used
except in accordance with applicable agreements.
Any comments or suggestions regarding this document should be sent to
"wgctechpubs@avaya.com".
© 2005 Avaya Inc. All rights reserved.
Avaya
Sterling Court
15 - 21 Mundells
Welwyn Garden City
Hertfordshire
AL7 1LZ
England
Tel: +44 (0) 1707 392200
Fax: +44 (0) 1707 376933
Web: http://www.avaya.com
5402/2402 Phone User Guide
IP Office
Page 20
Issue 2d (10th October 2005)
Download PDF

advertising